Post on 14-Jun-2020
CURRICULUM VITAE
Name: Md. Naushad Alam
Father’s Name: Md. Shamsul Arfin
Residence : Baitul Arfin
Street No. 9, Iqra colony,
Dhorra Mafi
Aligarh-202002,
UP, INDIA
Mobile: +91-9411488164
Email: naushad7863@rediffmail.com
naushadalam.me@amu.ac.in
Mailing Address: Mechanical Engineering Dept.
Aligarh Muslim University, Aligarh
UP India. Ph: +91-5712721335
Phone: +91-571-2721335
Fax: +91-571-2721335
Date of Birth: 30th Dec,1969
Academic Qualifications:
Ph.D.
2006, IIT Delhi, India
Thesis: Exact 2D Buckling Solutions and Geometricallly Nonlinear Zigzag
Theory of Hybrid Piezoelectric Beams
M. Tech.
1997, IIT Delhi, India
First Division
Specialization in Industrial Tribo & Maint. Engg.
B. Sc. (Engineering) Mechanical
1994, NIT Patna, India
First Division with Distinction
Academics Achievements:
QIP fellowship for pursuing Ph.D.
IIT Delhi Institute Scholarship for M.Tech.
GATE qualified with 94.69 percentile.
CSIR qualified in 1995.
Sherwani Award 1984.
National Merit Scholarship holder from 6th standard to graduation.
Professional Background:
Aligarh Muslim University: Professor: Feb 2013-till date
(Reader) Associate Professor Feb 2007- Jan 2013
Senior Lecturer (Sr.Asst. Professor) Feb 2002- Jan 2007
Lecturer (Asst. Professor) Feb 1998 - Jan 2002
Department: Mechanical Engineering
Present Designation: Professor
Nature of Job: Teaching and Research.
Research Work:
Research Area
Smart composite and Sandwich Structures, Active Control of Structures, Finite Element
Analysis, Reliability Availability and Maintainability of Structures and systems.
Published 22 papers in International Journals, 39 papers in International
conferences and 09 papers in National Conferences
Communicated -3 papers in International Journals.
Supervised 17 graduate (M.Tech.) dissertations
Supervised 30 undergraduate and Post Graduate (B.Tech/M.Tech.) projects
Two Book Reviewed, One FEM By SS Rao, Elsevier Pub. Other Mechanics
Pearson Publication
CITATIONS
Citation indices All Since 2012
Citations 187 146
h-index 7 6
i10-index 6 3
Funded Project: .
AICTE sanctioned project entitled” Development of Piezoelectric actuators for
Vibration control of Light Weight Structures” of Rs. 5.90 Lacks under RPS-Scheme
for 2008-2010
TEACHING:
Courses taught at under graduate-level (B. Tech.)
Engineering Mechanics
Machine Drawing and Computer Graphics
Engineering Drawing.
Solid Mechanics
Introduction to C Programming
Mechanical Vibrations
Computer Aided Design (CAD)
Machine Design
Courses taught at graduate-level (M. Tech.) Finite Element Methods
Fracture Mechanics
Advance Mechanics of Solids
Theory of Machine and Mechanism
Theory of Plates and Shells
Mechanics of Composite Materials
Design and Development:
Established a new CSM Lab in the department for M. Tech and Ph.D program.
Design and fabrication of Control setup for Active Vibration Control of structures
under electro-thermo-mechanical loads in the Department of Mechanical
engineering.
Renovation and development of Computer Graphics Laboratory (CAD) Lab in the
Department of Mechanical Engineering.
Design and induction of new courses in the Curriculum of B.Tech./M.Tech.
Suggested various experimental setups for Machinery Dynamics and Vibration lab.
Departmental Administrative Experience:
Lab. Incharge, CSM Lab., Dept. of Mech. Engg. AMU.
Incharge- M-Tech. (Machine Design Group)
Member, Post Graduate Research Committee.
Member, Departmental Development Committee.
Member, Departmental Moderation Committee for M.Tech. Exams.
Verifying Officer, Post Graduate Admissions.
Departmental Tabulator, M.Tech Program.
Scrutiny Officer, B.Tech. and M.Tech. Exams.
Principal Investigator of AICTE Project.
Member, Departmental NAAC & NBA committee.
Co-ordinator NBA, M.Tech Machine Design
Short Term/Refresher Courses:
Induction Training Program of 21 days from 11/05/98 to 30/05/98 at
Academic staff College AMU, Aligarh sponsored by AICTE, New Delhi.
QIP course on Reliability and Maintenance of Plants and Machinery from 4-
8 Dec, 2000, at IIT Delhi, New Delhi.
Training on AutoCAD 2000 of 48 hours by Apex Computer Education, New
Delhi.
Refresher course on Introduction to ABAQUS from 19-23 Feb, 2007, by
Abaqus Engineering India Limited, Chennai.
Refresher course, UGS sponsored Special Winter School 31 Dec.-21 Jan
2009. at Academic Staff College, AMU, Aligarh.
Refresher course, UGS sponsored Subject Refresher Course 3-23 Feb,
2009. at Academic Staff College, AMU, Aligarh.
Short term Training Program on MS Excel, 02-07 December 2013.
Refresher Course, “NX- Essentials for NX designers + NX CAE”, 30th sep
to 6th oct 2013.
Refresher Course, 4 days Training Programme on using Solid Works in 3D
foundation course, 2014.
Refresher Course, 3 days “Do engineering using Advance lab View with
hardware integration”, 8th Feb to 10th Feb 2014.
Workshops/seminar/Conferences:
Workshop on, “Lab VIEW Applications on Mechatronics” ZHCET AMU
Aligarh, 6th April 2011.
Workshop on “Experimental structural Dynamics, Structural Health
Monitoring and Non-destructive Evaluation Using Smart Materials” IIT Delhi
and IVS Noble solutions, 26th Oct 2013.
Paper presented in International Conference ACMFMS-2012, IIT Delhi,
New Delhi.
Session Chaired:
Session Chaired in International Conference ACMFMS-2012, IIT Delhi, New Delhi.
Membership :
Institution of Engineers. Computers and Programming Skill:
Language: C, Fortran, Operating System: Windows 2000, XP.
Software Package: MATLAB, AutoCAD, Abaqus, GLE, Solid Works, LabVIEW,
LATeX, NX-CAD.
Thesis Supervised:
Ph.D.
1. Anas M., “Dynamic Behaviour of Laminated Composite Beams for various
boundary conditions using Zigzag thery MATLAB and Abaqus” Registered in
Integral University, Lucknow.
2. Rahman N., “Structural Analysis and Active Vibration Control of Smart
Laminated Beams” (Submitted, 09 papers extracted from Ph.D. work
published in International Journals and Conferences).
3. Alam M.T., “Experimental Investigation of Processes and Properties of Stir
Cast Composites” (Submitted, 07 papers extracted from Ph.D. work published
in International Journals and Conferences).
4. Khalaf M Abdulameer “Design and Crash Worthiness Analysis of Metallic and
composite structures”.
Dissertations Supervised: P.G Level (M.Tech.):
1. Wasifullah K (2001).,”Oblique Impact of Projectile on Thin Plates”.
2. Yaqoob Yasin (2007), “Active Vibration Control of Elastic Plates with
Piezoelectric Actuators and sensors using LQG Controller”.
3. Upadhyaya NK (2007), “FEM Modeling and analysis of laminated
Composite and smart beams using Zigzag Theory for various end
conditions”.
4. Mohmmad Hasnain (2008), “Finite Element Analysis of Piezo electric Hybrid
Beam based on Zigzag Theory for Active Vibration Control using LQG
controller”.
5. Faisal Sherwani (2009), “Finite Element Modeling of Smart Beam For
Buckling Analysis using Zigzag Theory”.
6. Gupta A (2010). “Active Vibration Control of Smart Beams with
Experimental Validation”.
7. Mohsin K (2011), “Buckling Analysis of Smart Beam under Thermal Load”.
8. Abdullah Aamir Hayat (2011), “Kinematic and Dynamic Analysis of Stewart
Platform”.
9. Adnan Akhlaq (2011), “Modelling and simulation of multi-axis active
vibration isolation based on S-G Mechanism”.
10. M. Sarim (2012), “Modeling and analysis of composite and hybrid plates”.
11. Mohd. Furqan (2013), “Modeling and analysis of stewart platform with
flexible joints”.
12. Mustafa Wajid Ali (2013) ‘Modelling and Analysis of Functionally graded
beam using higher order theory”
13. Mohd. Junaid (2014), “Finite element modeling and active vibration control
of composite and sandwich shallow shells”.
14. Ateeb Ahmad Khan, “Assessment of Third Order Theory for Static, Dynamic
and Buckling Analysis of Functionally Graded Plate” (ongoing).
15. Mohammad Amir, “Comparison of Control Techniques for Vibration
Suppression of Composite and Functionally Graded Beams” .
16. Md. Salman Ansari, “Static, dynamic and buckling analysis of laminated
composite beams using state space approach”.
17. Yahya Bin Zia, “Comparison of various higher order theories for dynamic
analysis of laminated composite beams”.
18. Javed A. Ansari, “Dynamic analysis and active vibration control of smart
plate using actuators and sensors”.
19. Shuaib Alam, “Modelling and Analysis of Titanium-Graphene Composite
Beams”.
List of Publication:
Journals
1. Kapuria S., Alam N., Exact two-dimensional piezoelasticity solution for buckling
of hybrid beams and cross-ply panels using transfer matrices, Composite Structures
64, 1-11, 2004. (Impact factor 3.12), Citations- 11
2. Kapuria S., Alam N., Zigzag theory for buckling of hybrid piezoelectric beams
under electromechanical loads, I. J. Mechanical sciences, 46 (1), 1-25, 2004.
(Impact factor 2.061), Citations-11
3. Kapuria S., Dumir PC, Ahmad A., Alam N., Finite Element Model of efficient
zigzag theory for static analysis hybrid piezoelectric beams, Computational
Mechanics.34, 475-483, 2004,(Impact factor 2.432), Citations-8
4. Kapuria S., Alam N., Jain N.K., 2D piezoelectricity and zigzag theory solutions for
vibration of initially stressed hybrid beams, ASME J. Vibration and Acoustics..,
127, 116-124, 2005. (Impact factor 1.744), Citations-4
5. Kapuria S., Alam N., Nonlinear zigzag theory for buckling of hybrid piezoelectric
beam under electro-thermo-mechanical loads, ASCE J. Engineering Mechanics,
131, 367-376, 2005. (Impact factor 1.172)
6. Kapuria S., Alam N., Exact 2D solution and assessment of a 1D zigzag theory for
vibration of thermally stressed hybrid beams, J. Thermal Stresses, 28, 1-21, 2005.
(Impact factor 1.169), Citations-2
7. Kapuria S., Alam N., Coupled efficient zigzag finite element analysis of
piezoelectric hybrid beams under thermal loads, J. Thermal Stresses, 29, 553-583,
2006. (Impact factor 1.169), Citations-2
8. Kapuria S., Alam N., Efficient layer wise finite element model for dynamic analysis
of laminated piezoelectric beams, Computer Methods in Applied Mechanics &
Engineering, 195, 2742-2760, 2006. (Impact factor 2.626), Citations-32
9. Alam N., Upadhyay NK., Finite Element Analysis of Laminated composite beams
for Zigzag Theory Using MATLAB, International Journal of Mechanics and Solids,
5, 1-14, 2010. Citations-3.
10. Yasin MY., Ahmad Nazeer, Alam N., Finite element Analysis of Actively control
Smart Plate with patched actuators and sensors. Latin American Journal of Solids
and Structures, 7, 227-247, 2010. (Impact factor 1.254), Citations-18
11. Mohd. Anas, Irshad Hussain, M. Naushad Alam, Buckling of Laminated Composite
Beams using Zigzag Theory, International; Journal of Advanced Engineering
Sciences and Technologies, Vol. No. 11, Issue No. 2, pp. 292-296. (Impact factor
1.097)
12. Alam N., Upadhyay NK . Anas M., Efficient Finite Element Model for Dynamic
Analysis of Laminated Composite Beam, Structural Engineering and Mechanics,
vol 42, 471-488, 2012. Citations-2
13. Najeeb ur Rahman, M. Naushad Alam, Active vibration control of a piezoelectric
beam using PID controller: Experimental study, Latin American Journal of Solids
and Structures, Vol 9(6), 657-673, 2012. (Impact factor 1.254), Citations-2
14. Najeeb ur Rahman, M. Naushad Alam, Dynamic Analysis of Laminated Smart
Beams using Zigzag Theory, International Journal of Mechanics Structural (IJMS),
Volume 3, Number 1 (2012), pp. 35-46.
15. Najeeb ur Rahman, M. Naushad Alam, Active Vibration Suppression of
Piezoelectric Laminated Beam based on Efficient Finite Element Model using LQG
Controller, IJTAM, Volume 7, Number 1 (2012) pp. 9-24.
16. M Sarim, M N Alam, Effect of Piezoelectric Layer on Beam Parameters using
Zigzag Theory, AMAE International Journal on Manufacturing and Material
Science 3 (1), 2013.
17. M Furqan, MN Alam, Modeling and Analysis of Laminated Composite Beams
using Higher Order Theory, AMAE International Journal on Manufacturing and
Material Science 3 (1), 2013
18. Najeeb ur Rahman, M. Naushad Alam, Finite element modeling for buckling
analysis of hybrid piezoelectric beam under electromechanical loads, Latin
American Journal of Solids and Structures 11 (2014) 770-789. (Impact factor
1.254)
19. M. Anas, M.N.Alam, Dynamic response comparison for symmetric beams using 3-
noded and 2-noded beam element, IJETR, vol 2(4), pp. 78-82, 2014.
20. Najeeb ur Rahman, M. Naushad Alam, Structural Control of Piezoelectric
Laminated Beams under Thermal Load, Journal of Thermal Stresses, 38 (1), 69-95,
2015 (Impact factor 1.169)
21. M. Naushad Alam, Adnan Akhlaq and Najeeb ur Rahman, Dynamic analysis and
vibration control of a multi-body system using MSC Adams, Latin American
Journal of Solids and Structures, 12: 1505-1524, 2015 (Impact factor 1.254)
22. Ateeb Ahmad Khan, M. Naushad Alam, Najeeb-ur Rahman, Mustafa Wajid, Finite
element modelling for static and free vibration response of functionally graded
beam, Latin American Journal of Solids and Structures, Volume 13, pp. 690-714,
2016.
23. Md. Tanwir Alam, Akhter Husain Ansari,Sajjad Arif and Md. Naushad Alam,
Mechanical properties and morphology of aluminium metal matrix
nanocomposites-stir cast products, Advances in Materials and Processing
Technologies ,Vol 3, 600-617, 2017.
24. Najeeb ur Rahman, M. Naushad Alam, Effect of Piezoelectric Layer Thickness on
Static Response of a Hybrid Piezoelectric Beam, Advanced Science, Engineering
and Medicine, 10 (3), 455-459, 2018.
25. N Rahman, MN Alam, M Junaid, Active vibration control of composite shallow
shells: An integrated approach, Journal of Mechanical Engineering and Sciences,
12 (1), 3354-3369, 2018.
26. N Rahman, MN Alam, Finite element modelling to assess the effect of surface
mounted piezoelectric patch size on vibration response of a hybrid beam, IOP
Conference Series: Materials Science and Engineering, 310 (1), 012053, 2018.
27. N Rahman, MN Alam, Finite element modelling to assess the effect of position and
size of the piezoelectric layer of a hybrid beam, Latin American Journal of Solids
and Structures, 15 (3), 2018.
28. Yahya Bin Zia , Ateeb Ahmad Khan , Prof. M. Naushad Alam, Comparison of
various higher order shear deformation theories for static and modal analysis of
composite beam, IOP Conf. Series: Materials Science and Engineering 377 (2018)
012170.
29. MdTanwir Alam , Sajjad Arif , Akhter Husain Ansari and Md Naushad Alam,
Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium
matrix nanocomposites by two-step stir casting, Mater. Res. Express 6 (2019)
065002.
30. Mohammed A. K., M. Naushad Alam and Raisuddin Ansari, Quasi-static study of
thin aluminium frusta with linearly varying wall-thickness, International Journal of
Crashworthiness, (2019), DOI: 10.1080/13588265.2019.1613762.
Conferences:
1. Alam N, Sekhon GS, Effect of overload and repair rate on reliability and
availability of a power plant. Proceedings of International conference
ICROBT 2000, paper no. 2, Narosa Publication, New Delhi, Dec 2000.
2. Alam N., Siddiqui NA, Ahmad S., Fatigue and Fracture Reliability Analysis
of Series System, ICQRIT 21-23 Dec.,2001,New Delhi
3. Alam N, Kapuria S, Finite element modeling of hybrid beams with patch
sensors and actuators using a coupled efficient zigzag theory, Proc. 7th Int.
Conf. Compute. Struc. Tech., Lisbon, Paper no. 3, 1-14, 2004
4. Kapuria S, Alam N. FE model of hybrid beams with patch sensors and
actuators using consistent third order theory, II ECCOMAS Thematic
Conference on Smart Struct. Mat., Lisbon, July 18-21, 2005.
5. Alam N., Ahmad N., Vibration control of smart beam using finite element
analysis, accepted in National conference on recent advances in design
Engineering. Manipal Paper no.1, Feb 22-24, 2007.
6. Yaqoob Y, Alam N, and Ahmad N. Finite element modelling and vibration
control of smart plates with patch actuators and sensors, Proceedings of
ISSS-2008, Paper no. 49, Banglore, India.
7. Upadhyay NK, Alam N and Ahmad N, Finite Element Modeling and
Simulation of Propped Laminated Composite Beams using MATLAB,
Proceedings of ISSS-2008, Paper no. 22, Banglore, India.
8. Alam N., Anas N, Buckling Analysis of Laminated Composite Beams Using
zigzag theory MATLAB and ABAQUS Proceedings of ICEAE 2009,
Bangalore, India.
9. Alam H. Alam N., Active Vibaration Control of Smart Beam based on Zigzag
Theory using Optimal Control Technique, TEAM TECH 19-21 Nov., 2009,
Bangalore India.
10. Faisal Sherwani, M.Naushad Alam, Buckling Analysis of Smart Beam
Using zigzag Theory and MATLAB, MEMS, ISSS 2009, 14-16 Oct.2009,
Kolkata.
11. Najeeb ur Rahman, M. Naushad Alam, Active Vibration suppression of
smart laminated cantilever beam using efficient zigzag theory,
proceedings, National conference on advances in mechanical
engineering(NCAME-2010),A.M.U. Aligarh (2010),pp.241-248.
12. Abdullah Aamir Hayat, M. Naushad Alam, “Effect of Element type on
Dynamic Response of Composite Beams”, Proc. of National Conference
on Advances i9n Mechanical Enggineering, 2010, pp. 249-254.
13. Najeeb ur Rahman, M. Naushad Alam, Finite Element Modelling of Actively
Controlled Propped Hybrid Beam using Coupled ZigZag Theory,
proceedings, International conference on Science and Engineering
(ICSEE-2011)Rohtak, pp .386-391.
14. Abdullah Aamir Hayat, Adnan Akhlaque M. Naushad Alam, “The Finite
Element Modelling and Analysis Of Square Plate using Abaqus”,
Proceedings EVME2011, National Confrence, 2011 (4-5th April, 2011, SGI
group, Hindustan college of Engg).
15. Abdullah.A.Hayat, M Naushad Alam, “NANOTECHNOLOGY AND
DETERMINATION OF MECHANICAL STRENGTH ON NANO SCALE”,
National Seminar by UGC, 2011(at ZHCET, aligarh)
16. Abdullah Aamir Hayat, Adnana Aqhlaq, M. Naushad Alam, “Kinematic
Analysis of Stewart Platform Using Mathematica”, Proceedings
EVME2011, National Confrence, 2011 (4-5th April by SGI group),
Hindustan college of Engg).
17. Mohd. Anas, M. N. Alam, M. Ahmad Khan, Saifur Rehman, Finite Element
Modelling For Buckling Analysis of Symmetric and Asymmetric Beams
using Matlab, Proceedings of The National Conference on Recent
Advances in Mechanical Engineering (RAME-2011), pp. 25-32.
18. Abdullah Amir Hayat, Jiyaul Mustafa, Adnan Akhlaq, Danish Iqbal, M.
Naushad Alam, Finite Element Analysis of Drive Shaft with Circumferential
Crank Subjected to Axial Load, 5th International Conference on Advances
in Mechanical Engineering (ICAME-2011).
19. Najeeb ur Rahman, M. Naushad Alam, Abdullah A. Hayat, Active Vibration
Control of Piezoelectric Laminated Beam Under Clamped Conditions,
proceedings, 15th National Conference on Machines and Mechanisms
(NaCoMM2011-112), IIT Chennai.
20. Adnan Akhlaque , Abdullah Aamir Hayat, M. Naushad Alam, Active
Vibration Isolation using Stewart Gough Platform, proceedings, 15th
National Conference on Machines and Mechanisms (NaCoMM2011-118),
IIT Chennai.
21. Mohd Atif Jamil, M. Naushad Alam, and Najeeb-ur-Rahman, Dynamic
Analysis of Cantilever Beam using LabVIEW, Proc. of Int. Conf. on Recent
Trends in Mechanical, Instrumentation and Thermal Engineering 2012, pp.
63-67.
22. Abdullah Aamir Hayat, Adnan Akhlaque M. Naushad Alam, Design of a
flexural joint using finite element method, National Conference on
Machines and Mechanisms, Narosha Publishing House, 2012, pp. 198-
205.
23. Najeeb ur Rahman, M. Naushad Alam, Finite Element Modelling for
Buckling analysis of Angle-ply Hybrid beams, Proceeding of 3rd Asian
Conference on Mechanics of Functional materials and Structures
(ACMFMS 2012), IIT Delhi, 23-26, Dec. 5-8, 2012.
24. M Sarim, MN Alam, Buckling analysis of laminated composite plates using
discrete kirchhoff quadrilateral element, Proceeding of 3rd Asian
Conference on Mechanics of Functional materials and Structures
(ACMFMS 2012), IIT Delhi, 555-558, Dec. 5-8, 2012.
25. M N Alam ,M Furqan, Modelling and vibration reduction for stewart platform
using flexible joint, Proceeding of 3rd Asian Conference on Mechanics of
Functional materials and Structures (ACMFMS 2012), IIT Delhi, 589-592,
Dec. 5-8, 2012.
26. M Furqan, MN Alam, “Finite element analysis of a stewart platform using
flexible Joints”, Proc. Of First International and 16th National Conference on
machine and mechanism (iNaCoMM2013), IIT Roorke India, pp. 1044-
1049.
27. M Sarim, MN Alam, Effect of the Thickness of Piezoelectric Layer on
Hybrid Beams, Proc. of Int. Conf. on Recent Trends in Mechanical,
Instrumentation and Thermal Engineering 2012, pp. 47-51.
28. M Furqan, MN Alam, Assessment of Higher Order Theory for Laminated
Composite Beams, Proc. of Int. Conf. on Recent Trends in Mechanical,
Instrumentation and Thermal Engineering 2012, pp. 14-19.
29. Najeeb ur Rahman, M. Naushad Alam, Effect of Thickness of Piezoelectric
Layer on Dynamic Parameters of a Laminated Composite Beam,
Proceedings of the International Mechanical Engineering Congress (IMEC)
June 13-15, 2014, NIT-Trichy, pp. 319-323.
30. Mohd Atif Jamil, Najeeb ur Rahman, M. Naushad Alam, Relative function
of Piezoelectric Patches as Exciter/Actuator for Active Vibration Control: An
Experimental Study, Proceedings of the International Mechanical
Engineering Congress (IMEC) June 13-15, 2014, NIT-Trichy, pp. 354-357.
31. Mohd Junaid, M. Naushad Alam, and Najeeb-ur-Rahman, Finite element
modelling and analysis of shallow composite shell, Proceedings of the
International Mechanical Engineering Congress (IMEC) June 13-15, 2014,
NIT-Trichy, pp. 533-536.
32. Mohd Junaid, M. Naushad Alam, Najeeb-ur-Rahman and Mohd. Atif
Jameel, Dynamic analysis of shallow composite cylindrical shell,
International Conference on Advancements in Mechanical Engineering
ICAME-2014, Department of Mechanical Engineering, Al-Falah University,
Dhauj, Faridabad, 7-8 August, 2014.
33. Mohd. Atif Jameel, Najeeb-ur-Rahman, M. Naushad Alam, and Mohd
Junaid, Vibration Analysis and Signal Processing based on Virtual
Instrumentation using LabVIEW, International Conference on
Advancements in Mechanical Engineering ICAME-2014, Department of
Mechanical Engineering, Al-Falah University, Dhauj, Faridabad, 7-8
August, 2014.
34. Ateeb Ahmad Khan, M. Naushad Alam and Najeeb ur Rahman, Modelling
and Analysis of Functionally Graded Beam, Poster presentation in
National Conference on Hydrocarbon, Energy and Environment HEEcon-
2015, Department of Petroleum Studies, Aligarh Muslim University,
Aligarh, April 25, 2015.
35. Najeeb ur Rahman, M. Naushad Alam, Free and Forced Vibration
Analysis of Composite Cylindrical Shells, Proceedings of the National
Conference on Mechanical Engineering – Ideas, Innovation & Initiatives
(NCMEI3-2016) AMU Aligarh, 16 – 17 April 2016.
36. Salman Ansari,Mohammad Amir and M. Naushad Alam, Bending
Analysis of Laminated Composite Beams using State Space Approach,
Proceedings of the National Conference on Mechanical Engineering –
Ideas, Innovation & Initiatives (NCMEI3-2016) AMU Aligarh, 16 – 17 April
2016.
37. Mohammad Amir, Niyaz Ahman, M. Yaqoob Yasin and M. Naushad Alam,
Active Vibration Suppression of Laminated Composite Beam using LQR,
Proceedings of the National Conference on Mechanical Engineering –
Ideas, Innovation & Initiatives (NCMEI3-2016) AMU Aligarh, 16 – 17 April
2016.
38. Yahya Bin Zia and M. Naushad Alam, Assessment of Trigonometric Shear
Deformation Theory for Static Analysis of Composite Bear, Proceedings of
the National Conference on Mechanical Engineering – Ideas, Innovation &
Initiatives (NCMEI3-2016) AMU Aligarh, 16 – 17 April 2016.
39. Najeeb ur Rahman, M. Naushad Alam, Effect of thickness variation of core
and face sheets on free vibration response of a hybrid sandwich beam,
Proceedings of 3rd Indian Conference on Applied Mechanics (INCAM
2017) MNNIT, Allahabad, India, 5-7 July 2017, pp. 33-34.
40. Najeeb ur Rahman, M. Naushad Alam, Thermal Buckling Analysis of Laminated
Hybrid Beam with Variable Piezoelectric Layer Thicknesses, International
Conference on Contemporary Research in Mechanical Engineering (ICCRME
2018) Integral University, Lucknow, India, 6-7 April 2018.