Post on 25-Apr-2018
Current Cisco Unified Communications ManagerDevice Package Releases
• Cisco Unified Communications Manager Device Package Compatibility Matrix - Current, on page 1
Cisco Unified Communications Manager Device PackageCompatibility Matrix - Current
Published: January 30, 2014
Revised: May 29, 2018
Use this section to obtain the latest Cisco Unified Communications Manager (Unified CM) device packsavailable for:
• Unified CM 12.0(1)
• Unified CM 11.5(1)
• Unified CM 11.0(1)
• Unified CM 10.5(2)
A device pack introduces new phone types to Unified CM, and it installs the firmware and the configurationfiles needed to enable features on your Cisco device. New features may be turned off by default and they haveattributes or settings that must be configured.
Device packages are available from the Cisco Unified Communications Manager software download page.To obtain a device package, click the Unified CM device pack link in the table and a new browser windowor tab opens. You will need your Cisco sign-in.
Apply a device package to all of your Cisco Unified Communications Manager servers, beginning with thepublisher server and the TFTP server.
When you apply a device package to enable new device support, a cluster-wide reboot is not required forCisco Unified Communications Manager version 11.5(1) or later. Instead, after you add the device pack, dothe following in Cisco Unified Communications Manager:
• Restart the Cisco Tomcat service on all nodes.
• Restart Cisco TFTP on all servers where this service is running.
Current Cisco Unified Communications Manager Device Package Releases1
• Restart Cisco CallManager on the Publisher. If you’re not running the Cisco CallManager service on thePublisher, you can skip this step.
If you are using Cisco Unified Communications Manager version 11.0(1) or earlier, a cluster-wide reboot isrequired. A cluster-wide reboot is not required when you apply a device package to update existing firmwareor configuration.
For additional information on installing device packages, seeCisco Unified Communications Manager DevicePackage InstallationGuide(https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/Devpacks_admin/CMDP_BK_CD82F19C_00_cisco-unified-communications-manager-device/Cisco_Unified_Communications_Manager_Device_Package_Installation_and_Administration.html).
For a release that predates the current release, see the Cisco Unified CommunicationsManager Device PackageCompatibility Matrix - Historical.
Deprecated Phone Models on Cisco Unified Communications ManagerThe following table shows the list of phones that are no longer supported on a specific Cisco UnifiedCommunications Manager software release.
Deprecated PhonesCisco Unified CommunicationsManager
Software Release
• Cisco Unified IP Phone 7970G
• Cisco Unified IP Phone 7971G-GE
• Cisco Unified Wireless IP Phone 7921G
• All the phones listed in the next row
12.0
• Cisco IP Phone 12 SP+ and related models
• Cisco IP Phone 30 VIP and related models
• Cisco Unified IP Phone 7902
• Cisco Unified IP Phone 7905
• Cisco Unified IP Phone 7910
• Cisco Unified IP Phone 7910SW
• Cisco Unified IP Phone 7912
• Cisco Unified Wireless IP Phone 7920
• Cisco Unified IP Conference Station 7935
11.5 and earlier
If you use any of these phone models on an older release of Cisco Unified Communications Manager and youupgrade to a later release, the phone will not work after the upgrade completes.
Current Cisco Unified Communications Manager Device Package Releases2
Current Cisco Unified Communications Manager Device Package ReleasesDeprecated Phone Models on Cisco Unified Communications Manager
Cisco Unified IP Phone 3900 and 6900 SeriesThe following tables list Unified CM device pack available for the Cisco Unified IP Phone 3900 and 6900Series.
Unified CM device packs contain both configuration files and firmware files.
Table 1: Cisco Unified SIP Phone 3905
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)12.0(1)Device ReleaseDevice Type
cmterm-devicepack11.0.1
Dec. 22, 2015
cmterm-devicepack11.0.1
Dec. 22, 2015
Native in UCMNative in UCM9.4(1)SR23905
Native in UCMNative in UCMNative in UCMNative in UCM9.4(1) SR1
Configuration FilesOnly
Not ApplicableNative in UCMNative in UCM9.4(1)
Table 2: Cisco Unified IP Phones 6900 Series
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)12.0(1)Device ReleaseDevice Type
cmterm-devicepack10.5.2
April 24, 2015
Native in UCMNative in UCMNative in UCM9.3(1)SR26901 and 6911
Native in UCMNot ApplicableNative in UCMNative in UCM9.3(1)SR1
cmterm-devicepack10.5.2
Sept. 3, 2015
cmterm-devicepack11.0.1
Sept. 3, 2015
Native in UCMNative in UCM9.4(1)SR2 Firmware6921, 6941, 6945,and 6961
Native in UCMNative in UCMNative in UCMNative in UCM9.4(1)SR1 Firmware
Cisco IP Phone 7800 SeriesThe following tables list Unified CM device pack available for the Cisco IP Phone 7800 Series.
Unified CM device packs contain both configuration files and firmware files.
When upgrading from Firmware Release 10.3(1) to Firmware Release 11.0(1), the K-Factor has been removedfrom the Call Details Record. This was intentional as Cisco Unified Communications Manager does notsupport RTP-RxStat messages greater than 256 characters in length.
Note
Current Cisco Unified Communications Manager Device Package Releases3
Current Cisco Unified Communications Manager Device Package ReleasesCisco Unified IP Phone 3900 and 6900 Series
Table 3: Cisco Unified IP Phone 7800 Series
Unified CM10.5(2)
Unified CM11.0(1)
Unified CM11.5(1)
Unified CM12.0(1)
Device ReleaseDevice Type
To be released.To be released.To be released.cmterm-devicepack12.0.1
May 28, 2018
12.1(1)7811, 7821,7841, and 7861
cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 2017
12.0(1)SR1
cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 2017
12.0(1)7832
Cisco Unified IP Phone 7900 SeriesThe following tables list Unified CM device pack available for the Cisco Unified IP Phone 7900 Series.
Unified CM device packs contain both configuration files and firmware files.
Table 4: Cisco Unified IP Phone 7900 Series
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
April 4, 2017
cmterm-devicepack11.0.1
April 4, 2017
cmterm-devicepack11.5.1
April 4, 2017Native in UCM
The following phoneshave been deprecated foruse in Unified CM12.0(1) :
• 7970G
• 7971G-GE
9.4(2)SR37911G,7931G,7941G,
7941G-GE,7942G,7945G,7961G,
7961G-GE,7962G,7965G, ,and 7975G
cmterm-devicepack10.5.2
Aug 23, 2016
cmterm-devicepack11.0.1
Aug 24, 2016
cmterm-devicepack11.5.1
Aug 23, 20169.4(2)SR2
Native in UCMNative in UCMNative in UCMNative in UCM8.1(2)SR2
(SCCP)7940G and7960G
Native in UCMNative in UCMNative in UCMNative in UCM1.0(4)7915G and7916G
cmterm-devicepack10.5.2
April 24, 2015Native in UCMNative in UCMDeprecated for use in
Unified CM 12.0(1).
1.4(6)7921G
Native in UCMNot ApplicableNative in UCM1.4(5)
Current Cisco Unified Communications Manager Device Package Releases4
Current Cisco Unified Communications Manager Device Package ReleasesCisco Unified IP Phone 7900 Series
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
June 4, 2018To be released.
cmterm-devicepack11.5.1
June 4, 2018
cmterm-devicepack12.0.1
May 28, 20181.4(8)
SR17925G,7925G-EX,and 7926G cmterm-devicepack10.5.2
May 12, 2016
cmterm-devicepack11.0.1
May 12, 2016Native in UCMNative in UCM1.4(8)
Native in UCMNative in UCMNative in UCMNative in UCM1.4(5)7937G
Cisco Unified IP Phone 8800, 8900, and 9900 SeriesThe following tables list Unified CM device pack available for the Cisco Unified IP Phone 8800, 8900, and9900 Series.
Unified CM device packs contain both configuration files and firmware files.
Table 5: Cisco Unified IP Phone 8800 Series
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
To be released.To be released.To be released.cmterm-devicepack12.0.1
May 28, 201812.1(1)
8811, 8841,8845, 8851,8851NR,8861, 8865,
and8865NR
cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 201712.0(1)
To be released.To be released.To be released.cmterm-devicepack12.0.1
May 28, 201812.1(1)
8832cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 201712.0(1)
cmterm-devicepack10.5.2
Jan 7, 2016
cmterm-devicepack11.0.1
Jan 7, 2016Native in UCMNative in UCM10.3(1)
SR28831
cmterm-devicepack10.5.2
May 29, 2015Native in UCMNative in UCMNative in UCM10.3(1)
To be released.To be released.To be released.cmterm-devicepack12.0.1
May 28, 201811.0(3)SR6
8821cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 201711.0(3)SR4
Current Cisco Unified Communications Manager Device Package Releases5
Current Cisco Unified Communications Manager Device Package ReleasesCisco Unified IP Phone 8800, 8900, and 9900 Series
Table 6: Cisco Unified IP Phone 8900 and 9900 Series
Unified CM Device 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
IP PhoneDevice
Type
cmterm-devicepack10.5.2
Nov 30, 2016
cmterm-devicepack11.0.1
Nov 30, 2016
cmterm-devicepack11.5.1
Nov 30, 2016Native in UCM9.4(2)SR3
8941 and8945 cmterm-devicepack10.5.2
October 29, 2015
cmterm-devicepack11.0.1
October 29, 2015Native in UCMNative in UCM9.4(2)SR2
cmterm-devicepack10.5.2
Oct. 2, 2015
cmterm-devicepack11.0.1
Oct. 2, 2015Native in UCMNative in UCM9.4(2)SR28961, 9951,
and 9971Native in UCMNative in UCMNative in UCMNative in UCM9.4(2)
Cisco Analog Telephone AdapterThe following tables list Unified CM device pack available for the Cisco Analog Telephone Adapter (ATA)Devices.
Unified CM device packs contain both configuration files and firmware files.
Table 7: Cisco Analog Telephone Adapter
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
Native in UCMNative in UCMNative in UCMNative in UCM9.2(3)
SIPATA 187
cmterm-devicepack10.5.2
July 8, 2016
cmterm-devicepack11.0.1
July 11, 2016Native in UCMNative in UCM1.2.2
ATA 190cmterm-devicepack10.5.2
Sept. 3, 2015
cmterm-devicepack11.0.1
Sept. 3, 2015Native in UCMNative in UCM1.2.1
cmterm-devicepack10.5.2
Dec. 20, 2017
cmterm-devicepack11.0.1
Dec. 27, 2017
cmterm-devicepack11.5.1
Dec. 20, 2017
cmterm-devicepack12.0.1
Dec. 27, 201712.0(1)ATA 191
Cisco DX Series and Cisco CiusThe following tables list Unified CM device pack available for the Cisco Cius and Cisco DX Series Devices.
Unified CM device packs contain both configuration files and firmware files.
Current Cisco Unified Communications Manager Device Package Releases6
Current Cisco Unified Communications Manager Device Package ReleasesCisco Analog Telephone Adapter
Table 8: Cisco DX Series - Configuration Files Only
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM12.0(1)Device ReleaseDevice Type
cmterm-devicepack10.5.2
April 4, 2017
cmterm-devicepack11.0.1
April 4, 2017
cmterm-devicepack11.5.1
April 4, 2017Native inUCM
CollaborationEndpoint
Software 8.3DX70 andDX80
cmterm-devicepack10.5.2
Nov 30, 2016
cmterm-devicepack11.0.1
Nov 30, 2016
cmterm-devicepack11.5.1
Nov 30, 2016Native inUCM
CollaborationEndpoint
Software 8.3
cmterm-devicepack10.5.2
Sept. 3, 2015
cmterm-devicepack11.0.1
Sept. 3, 2015Native in UCMNative in
UCM10.2(5)
DX650cmterm-devicepack10.5.2
May 29, 2015Native in UCMNative in UCMNative in
UCM10.2(4)
Table 9: Cisco Cius - Configuration Files Only
Unified CM 8.6(2)Unified CM 9.1(2)Unified CM 10.5(2)DeviceReleaseDevice Type
cmterm-devicepack8.6.2
July 9, 2012Native in UCMNative in UCM9.2(4)Cius
Cisco TelePresenceThe following tables list Unified CM device pack available for the Cisco TelePresence Devices.
Table 10: Cisco TelePresence IX5000 - Configuration Files Only
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
Dec. 20, 2017
cmterm-devicepack11.0.1
Dec. 27, 2017
cmterm-devicepack11.5.1
Dec. 20, 2017
cmterm-devicepack12.0.1
Dec. 27, 2017SoftwareIX 8.0
Cisco Tele.IX5000 cmterm-devicepack10.5.2
Aug 23, 2016
cmterm-devicepack11.0.1
Aug 24, 2016
cmterm-devicepack11.5.1
Aug 23 2016Native in UCM
Current Cisco Unified Communications Manager Device Package Releases7
Current Cisco Unified Communications Manager Device Package ReleasesCisco TelePresence
Table 11: Cisco TelePresence E, EX, C, SX, and MX Series - Configuration Files Only
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
April 4, 2017
cmterm-devicepack11.0.1
April 4, 2017
cmterm-devicepack11.5.1
April 4, 2017
Native in UCMCollaborationEndpointSoftware
8.3
CiscoTelePresenceMX, andSX Seriesdevices
cmterm-devicepack10.5.2
May 29, 2015Native in UCMNative in UCMNative in UCMTC7.3(3)EX, C, SX,
and MXSeries
Native in UCMNative in UCMNative in UCMNative in UCMTC7.2.
cmterm-devicepack10.5.2
May 29, 2015Native in UCMNative in UCMNative in UCMCE8.0
MX200G2,MX300
G2,MX700,MX800,MX800Dual, SX10and SX80.
cmterm-devicepack10.5.2
May 29, 2015Native in UCMNative in UCMNative in UCMTC7.3(3)
Table 12: Cisco TelePresence CTS and TX Series - Configuration Files Only
Unified CM 10.5(2)Device ReleaseDevice Type
Native in UCMN/ACisco Tele.
CTS and TX series Native in UCMN/A
Cisco Spark RoomThe following tables list Unified CM device pack available for the Cisco Spark Room Series.
Unified CM device packs contain both configuration files and firmware files
Table 13: Cisco Spark Room - Configuration Files Only
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
Dec. 20, 2017
cmterm-devicepack11.0.1
Dec. 27, 2017
cmterm-devicepack11.5.1
Dec. 20, 2017
cmterm-devicepack12.0.1
Dec. 27, 2017
CiscoCollaborationEndpointSoftware 9
Cisco SparkRoom Kit70 (Dual)and CiscoSpark
Room Kit70 (Single)
Current Cisco Unified Communications Manager Device Package Releases8
Current Cisco Unified Communications Manager Device Package ReleasesCisco Spark Room
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
Oct. 16, 2017
cmterm-devicepack11.0.1
Oct. 4, 2017
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 2017
CiscoCollaborationEndpointSoftware 9
Cisco SparkRoom Kit
55
cmterm-devicepack10.5.2
April 4, 2017
cmterm-devicepack11.0.1
April 4, 2017
cmterm-devicepack11.5.1
April 4, 2017Native in UCM
CiscoCollaborationEndpointSoftware
8.3
Cisco SparkRoom Kitand CiscoSpark
Room KitPlus
Cisco 4000 Series Integrated Services RoutersThe following tables list Unified CM device pack available for the Cisco 4000 Series Integrated ServicesRouters.
Unified CM device packs contain both configuration files and firmware files.
Table 14: Cisco 4000 Series Integrated Services Routers
Unified CM 10.5(2)Unified CM 11.0(1)Unified CM 11.5(1)Unified CM 12.0(1)DeviceRelease
DeviceType
cmterm-devicepack10.5.2
Oct. 16, 2017Currently Not Available
cmterm-devicepack11.5.1
Oct. 18, 2017
cmterm-devicepack12.0.1
Nov. 7, 2017
Cisco IOSXE Everest16.4.1
Cisco 4000Series
IntegratedServicesRouters
Cisco JabberThe following tables list Unified CM device pack available for Cisco Jabber.
Unified CM device packs contain both configuration files and firmware files.
Table 15: Cisco Jabber
Unified CM 10.5(2)Device ReleaseDevice Type
Native in UCM10.6(0)Cisco Jabber
Native in UCM9.1(1)
Current Cisco Unified Communications Manager Device Package Releases9
Current Cisco Unified Communications Manager Device Package ReleasesCisco 4000 Series Integrated Services Routers
Current Cisco Unified Communications Manager Device Package Releases10
Current Cisco Unified Communications Manager Device Package ReleasesCisco Jabber