Post on 14-Aug-2015
CRUSHER CIRCUIT
BAYA
CIRCUIT DESCRIPTION
OPERATING PARAMETERS
ROM ore size (-800mm)
Jaw crusher closed side setting (120-160)mm
Apron feeder speed (30-50)%
Power draw while loaded (10-50) kW
Power draw while idle/no load (8-10) kW
Crushed ore Bin level (150) tonne capacity. The secondary crusher is a standard head cone
crusher which operates at a closed side setting of ~30-35mm and is powered by a 375kW motor
TECHNICAL QUESTIONS
What is communition ?
What is the aim of communition at NMGP
What is reduction ratios?
Is a crusher open circuit or closed?
What is type of crusher used at NMGP and y?
SINGLE TOGGLER JAW CRUSHER
QUESTIONS CONT…What is C.S.S and OSS ?
What is crusher gap ?
List 3 factors which decrease CR03
performance
What is the live capacity of ROM BIN, stockpile
State 2 advantage of scalping
What does magnet on CV07 do?
QUESTIONS ON TROUBLESHOOTING State 4 major component of conveyor
Name 1 equipment that only found on 1
conveyor and which conveyor ?
What is function of weight meter and which
belt have no weight meter?
If the primary feeder stop what next
equipment to stop
STOP!!
Thanks for your attention