Post on 14-Apr-2018
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 1/27
User Manual for Creating Characteristics and Class
Creating Characteristics:
Definition: Feature of a product.
Transaction Code: CT04
1. Enter the Characteristic
name and Valid from Date
2. Click on Create
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 2/27
User Manual for Creating Characteristics and Class
1. Enter the Description for
the Characteristic.
2. Check that
Status should be
released
3. Enter the data type whether the
characteristic is Character format,
numeric format. Select the
appropriate type.
4. Enter the
number of
characters.
5. Select Single value or Multiple Value. Single
value while selecting the values in sales
orders only one value can be selected.
Multiple Value means more than one value
can be selected.
7. If the characteristic is related to variant
pricing, Click on additional data tab first
and enter table name field Enter SDCOM,
Field name VKOND And then Click on
Values tab.
6. Select entry required if needed. If
selected while entering sales order w/o
entering a value for this characteristics stem does not allow to save the Order
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 3/27
User Manual for Creating Characteristics and Class
In additional data Tab when SDCOM, VKOND is
entered the system changes three things:
1. Not ready for input is ticked. Remove
the tick.
2. In basic data tab system highlights
multiple values if needed change it to
single value.
3. Description of characteristic is changed
to Variant condition. Change the
description as you needed
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 4/27
User Manual for Creating Characteristics and Class
1. Highlighted Tick
mark has been
2. Click on Basic data tab
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 5/27
User Manual for Creating Characteristics and Class
Initially we Selected Single value
after entering Table name and
field name in additional data tab
system changes to multiple
values. So again you should select
single value and also change the
description as before.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 6/27
User Manual for Creating Characteristics and Class
1.I have selected from
multiple to Single and also
changed the Description.
2. Click on Values tab
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 7/27
User Manual for Creating Characteristics and Class
In the Values tab Enter the values
related to Tractor Model and
Description.
For writing Dependency double click
the Object Dependency with respect
to that value
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 8/27
User Manual for Creating Characteristics and Class
Note: As Tractor Model is dependent on tractor Write dependency in the same manner.
In the same way create Another Characteristic Tractor and input all the values for tractor
as shown below then proceed writing dependency.
1. Characteristic tractor has been
Values has been Entered for
the Characteristic.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 9/27
User Manual for Creating Characteristics and Class
Now I will write the dependency for the tractor model based on the tractor.
Eg: Mahindra tractor models only should be displayed when only Mahindra tractor.
So open the characteristic which is created in change mode yb_tractor_model and for each
value of Mahindra write the dependency as
YB_Tractor in (‘M&M’)
Double click Object dependency
with respect to 1st
M&M Value
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 10/27
User Manual for Creating Characteristics and Class
1. After double Clicking
system shows popup in
that precondition should
be selected.
2. Click on Enter
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 11/27
User Manual for Creating Characteristics and Class
In the blank space write the
dependency. If the 2nd line has to be
inserted. Place the cursor in the 1st
line and click on insert.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 12/27
User Manual for Creating Characteristics and Class
Dependency written for Tractor model Mahindra
275,475,575,585,444 as when tractor is m&m. In the
same way write for other tractor models as shown
below.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 13/27
User Manual for Creating Characteristics and Class
1. After Writing Click
on Check errors
2. System showing the message
as no s ntax errors.
3. Click on Save if no Errors.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 14/27
User Manual for Creating Characteristics and Class
Save the Characteristic.
Dependency written for JD 5204
When tractor JD is
selected in Sales order JD
5204 Value will be shown.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 15/27
User Manual for Creating Characteristics and Class
Creating Class:
Definition: Class is Combination of Characteristics.
Transaction Code: CL02
Enter the Class name
Enter the Class type -300
Click on Create
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 16/27
User Manual for Creating Characteristics and Class
1.Enter the Description, Check the status has
released. Enter the Valid from date.
2. Select Characteristics
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 17/27
User Manual for Creating Characteristics and Class
1. Enter all the Created
characteristics related to the
product.
Click on Save
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 18/27
User Manual for Creating Characteristics and Class
Assigning Class in Classification View of Material Master.
Transaction Code: MM02
1. Enter the Material
Click on Select Views
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 19/27
User Manual for Creating Characteristics and Class
Select Classification View
Press Enter
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 20/27
User Manual for Creating Characteristics and Class
Select Variants -300
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 21/27
User Manual for Creating Characteristics and Class
1. Enter the class which is created in CL02
2. Click on Save
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 22/27
User Manual for Creating Characteristics and Class
Creating Configurable Profile:
Transaction Code: CU41
1. After Entering Cu41 – The system
display dialog box. Select Material.
2. Click Enter
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 23/27
User Manual for Creating Characteristics and Class
1. Enter the Material
2. Enter Valid from
3. Click on Mountain button.
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 24/27
User Manual for Creating Characteristics and Class
1. Enter 01, Enter profile
Description, Class type -300. Press
2. Ensure that Status is released
3. Select the profile Line and click on details
4. Click on Details
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 25/27
User Manual for Creating Characteristics and Class
Click on Config Initial Screen
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 26/27
User Manual for Creating Characteristics and Class
Make the Settings as
Shown in the Screen
7/29/2019 Creating Characteristic and Class
http://slidepdf.com/reader/full/creating-characteristic-and-class 27/27
User Manual for Creating Characteristics and Class