Post on 07-Feb-2018
Standard
Off Centre (OC)
ptsize
ptsize
Min. Centre
Multicrease (MC)
ptsize
ptsize
3.0 mm
PRIME Creasing Matrix
Amake
systems
today. market the
on creasing stable and accurate most the of one Prime SKOR materials synthetic high-end and cotton cellulose, fibre of mixture
creasing
•of
• • • • •
Cost-effective.
runs. production long ensures Prime SKOR
plate. cutting die the on residue no leaves adhesive Strong
width. nelchan and depth channel in tolerance high Extreme
paper. backing the of removal easy and Quick
markings. board prevents and sheet, every flow free a assures channel the of angle degree 40 The
channel. the with rule
the of alignment perfect a allows locator advanced The•
wb
or X2
a
= +
d a=
TYPES OF MATRIX
HOW TO CALCULATE MATRIX DEPHT AND WIDTH
Locator
Matrix
Chamfered edge
Thin film baseSelf adhesive
Finger lift release paper
Matrici per cordonare - Creasing Matrix
PrimeAvailable sizes inseveral
Offcentre
PRIMEAVAILABLE SIZES
-------------0.65 x 1.3 mm0.65 x 1.4 mm0.65 x 1.5 mm0.65 x 1.6 mm0.65 x 1.7 mm0.65 x 1.9 mm0.65 x 2.1 mm0.65 x 2.3 mm0.65 x 2.5 mm0.65 x 2.7 mm0.65 x 3.0 mm0.65 x 3.2 mm0.65 x 3.5 mm0.65 x 4.0 mm0.65 x 4.5 mm0.65 x 5.0 mm0.65 x 6.0 mm0.65 x 7.0 mm0.65 x 8.0 mm-------------0.7 x 1.3 mm0.7 x 1.4 mm0.7 x 1.5 mm0.7 x 1.6 mm0.7 x 1.7 mm0.7 x 1.9 mm0.7 x 2.1 mm0.7 x 2.3 mm0.7 x 2.5 mm0.7 x 2.7 mm0.7 x 3.0 mm0.7 x 3.2 mm0.7 x 3.5 mm0.7 x 4.0 mm0.7 x 4.5 mm0.7 x 5.0 mm0.7 x 6.0 mm0.7 x 8.0 mm------------0.8 x 1.5 mm0.8 x 1.6 mm0.8 x 1.7 mm0.8 x 1.9 mm0.8 x 2.1 mm0.8 x 2.3 mm0.8 x 2.5 mm
0.8 x 3.0 mm0.8 x 3.2 mm0.8 x 3.5 mm0.8 x 4.0 mm0.8 x 4.5 mm0.8 x 5.0 mm0.8 x 6.0 mm0.8 x 8.0 mm
1.0 x 5.0 mm1.0 x 6.0 mm1.0 x 8.0 mm------------1.2 x 3.0 mm1.2 x 3.2 mm1.2 x 3.5 mm1.2 x 4.0 mm1.2 x 4.5 mm1.2 x 5.0 mm1.2 x 6.0 mm1.2 x 7.0 mm1.2 x 8.0 mm------------1.4 x 3.0 mm1.4 x 3.2 mm1.4 x 3.5 mm1.4 x 4.0 mm1.4 x 4.5 mm1.4 x 5.0 mm1.4 x 6.0 mm1.4 x 7.0 mm1.4 x 8.0 mm------------1.6 x 3.0 mm1.6 x 3.2 mm1.6 x 3.5 mm1.6 x 4.0 mm1.6 x 4.5 mm1.6 x 5.0 mm1.6 x 6.0 mm1.6 x 7.0 mm1.6 x 8.0 mm
------------0.3 x 0.6 mm
0.3 x 1.0 mm0.3 x 1.1 mm0.3 x 1.2 mm0.3 x 1.3 mm0.3 x 1.4 mm0.3 x 1.5 mm0.3 x 1.6 mm0.3 x 1.7 mm0.3 x 1.9 mm------------0.4 x 0.6 mm0.4 x 0.8 mm
0.4 x 1.1 mm0.4 x 1.2 mm0.4 x 1.3 mm0.4 x 1.4 mm0.4 x 1.5 mm0.4 x 1.6 mm0.4 x 1.7 mm0.4 x 1.9 mm-------------0.45 x 0.8 mm0.45 x 1.0 mm0.45 x 1.1 mm0.45 x 1.2 mm0.45 x 1.3 mm0.45 x 1.4 mm0.45 x 1.5 mm0.45 x 1.6 mm0.45 x 1.7 mm0.45 x 1.9 mm------------0.5 x 0.8 mm0.5 x 1.0 mm0.5 x 1.1 mm0.5 x 1.2 mm
Board Thickness>150 micronBoard100-150 gr.
White
0.3 x 0.8 mm
Board Thickness150-250 micronBoard150-200 gr.
White
Board Thickness200-400 micronBoard200-275 gr.
White
0.5 x 1.3 mm
------------0.5 x 0.8 mm0.5 x 1.0 mm0.5 x 1.1 mm0.5 x 1.2 mm
0.5 x 1.4 mm0.5 x 1.5 mm0.5 x 1.6 mm0.5 x 1.7 mm0.5 x 1.9 mm0.5 x 2.1 mm0.5 x 2.3 mm--------------0.55 x 0.8 mm0.55 x 1.0 mm0.55 x 1.2 mm0.55 x 1.3 mm0.55 x 1.4 mm0.55 x 1.5 mm0.55 x 1.6 mm0.55 x 1.7 mm0.55 x 1.9 mm0.55 x 2.1 mm0.55 x 2.3 mm--------------0.6 x 1.0 mm0.6 x 1.1 mm0.6 x 1.2 mm0.6 x 1.3 mm0.6 x 1.4 mm0.6 x 1.5 mm0.6 x 1.6 mm
0.6 x 1.9 mm0.6 x 2.1 mm0.6 x 2.3 mm0.6 x 2.5 mm0.6 x 2.7 mm0.6 x 3.0 mm0.6 x 3.2 mm0.6 x 3.5 mm0.6 x 4.0 mm0.6 x 5.0 mm0.6 x 6.0 mm0.6 x 7.0 mm0.6 x 8.0 mm
Board Thickness450-650 micronBoard335-400 gr.
White
------------1.0 x 2.3 mm1.0 x 2.5 mm1.0 x 2.7 mm1.0 x 3.0 mm1.0 x 3.2 mm1.0 x 3.5 mm1.0 x 4.5 mm
Board Thicknessfor microflute
White
0.8 x 2.7 mm
Board Thicknessfor corrugated and pressed board thick
White
1.0 x 4.0 mm
0.3
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.8
1.0
1.2
1.4
1.6
0.5
0.4 x 1.0 mm
0.6 x 1.7 mm
SKOR www.dycartec.nl F 26 353 52 35 0031 • 25 353 52 35 0031 T • info@dycartec.nl •
Dycartec by distributed is