Post on 13-Jul-2020
CORA BIKE RACKPRODUCT SPECIFICATION SHEET
CBR SERIES CBR1’B’ AND CBR1’F’BIKE RACKSThe Cora CBR Series offer a wide
range of attractive bike rail designs
that can be installed as single units
or in clusters to accommodate 1 to
100’s of bikes in an unlimited variety
of configurations and in challenging
spaces. CBR Series bike rails are
designed to support the entire bike
frame and each unit can
accommodate up to 2 bikes, with 1
bike on each side.
Capacity• Single side access - 1 bike• Double sided access - 2 bikes
Construction• Heavy duty high quality steel or 316 stainless steel• 48.3 OD x 2.77 MD
Fixings• ‘B’ 4 x M10 x 80mm stainless steel anchor bolts with
tamper resistant fasteners supplied. 150mm x 6mmround base plate
• ‘F’ Conctrete fix in-situ bike rail ends include spigots fora secure fix
Finishes• In Stock - Galvanised• In Stock - 316 Stainless Steel with Electropolish• Option - 304 Stainless Steel• Option - Colour Powder Coat (Cora standard colour
range)
Assembly• Supplied fully welded and assembled
Compliance• Rack is AS2890.3 (2015) compliant
Cora Bike Rack - Australia’s Bike Parking Experts - cora.com.au - ph 1800 249 878 Rev 3.00 Feb 2019 ©
CBR1 B CBR1 F
‘B’ - base plate with anchor bolts
‘F’ - subsurface concrete fix
80
0 m
m
850 mm
100
100
CBR LAYOUT GUIDETo comply with AS2890.3 (2015)
CBR Series racks should be
mounted with the spacings shown.
For specific assembly and
installation instructions relating to
CBR Series racks, please refer to
individual instruction information
sheets.
Racks should not be installed, based
on the information on this sheet
alone.
CORA BIKE RACKPRODUCT SPECIFICATION SHEET
500
500
100
500
40
015
00
150
0
100
010
00
Required for Bicycle Access
Required for Bicycle Access
Maximum extentof bicycles
Maximum extentof bicycles
Required for Bicycle Access
Max
imu
m e
xten
t o
f b
icyc
les
900
900
900
900
900
900
900
900
900
900
1500
Parallel Double
Side
In- Line Double
Side
In- Line Single Side
Cora Bike Rack - Australia’s Bike Parking Experts - cora.com.au - ph 1800 249 878 Rev 3.00 Feb 2019 ©
sales@cora.com.au
www.cora.com.au
PH 1800 249 878
CORA BIKE RACKPRODUCT SPECIFICATION SHEET
1250
625
(to
cen
tre
of
rack
)
110
0
Min required for Bicycle Access
Min aisle width
Cora Bike Rack - Australia’s Bike Parking Experts - cora.com.au - ph 1800 249 878 Rev 3.00 Feb 2019 ©
Angle Double
Side
Single Aisle
Double Side
100010001000
1000 1000
1000 1400 (to centre of rack)
1000
1500
1800
CBR LAYOUT GUIDETo comply with AS2890.3 (2015)
CBR Series racks should be
mounted with the spacings shown.
For specific assembly and
installation instructions relating to
CBR Series racks, please refer to
individual instruction information
sheets.
Racks should not be installed, based
on the information on this sheet
alone.
180
015
00
180
0