Post on 26-May-2020
Solution example
Contact-free detection of defects in lithium-ion batteries, food and medical packaging●Contact-free testing machine operating via
ultrasonic wave transmission●Non-destructive, contact-free, dry inspection●Able to clearly detect air bubbles and peeling
that are poorly detectable by X-ray testing
SST-304 series
g
Contact-freeUltrasonic tester
Allows for testing for residual air bubbles within the pouch and impregnation testing. Allows for quantitative testing by threshold.
Residual gas
By using focusing calibration techniques of a chosen layer, it is possible to acquire a tomographic image and perform defect depth analysis.
Detects signal deterioration using high-speed circumference scan.
Detects trapping of foreign matter in aluminum laminate films consisting of 4 thermally bonded A4 size edges
Aluminum laminate adhesion testing example
Signal change due to resin hardening
φ5, 3, 1 defect inside CFRP
Defect NG evaluation Detailed scanning of defective parts
■Top view
■
■
Composite material (CFRP) testing
Resin hardness measurement ■
■
Surface shape measurement using reflection
CFRP and steel plate bonding testing
■Side view
Bonded with lubricant
Film(0.2mm)Space
(0.1mm) Acrylic resin(3mm)Film(0.2mm)
1.5mm
2.0mm
2.5mm
2nd one front1st one front
1st one reverse
2nd one reverse
hour
0.6
0.8
1
1.2
1.4
1.6
1.8
2
100000
10000
1000
100
10
Out
put
Stor
age
mod
ulus
(Pa)
0 1 2 3 4 5 6
Dynamic viscoelasticity measurement resultsMeasurement data
Packaging laminate defect testing CFRP/composite material defect testing
Defect depth evaluationLithium-ion battery porosity testing
TypeScaning rangeDrive(Drive option)
DisplayDataWeightPower voltage, power supplyAirUsage temperature
Production specificationExternal dimensions
Notice : Please note that specifications are subject to change without notice.
SST-304322(W) x 230(D)mmAC servo motor 4 axisRotation measurement unit( servo motor 1 axis)18.5-inch wide LCDHDD450kgAC100V~220V, 50/60Hz, 1kVAUnused5~40°C
SST-304 Stand-alone / general-purpose type
Notice : Please note that specifications are subject to change without notice.
TypeScaning rangeDriveDisplayDataWeightPower voltage, power supplyAirUsage temperatureAutomatic test
Production specificationExternal dimensionsSST-304C400(W) x 280(D)mmAC servo motor 4 axis24-inch LCDHDD600kgAC100V~220V, 50Hz, 1kVAUnused5~40°CCommunication with the host computer via an external IO terminalBarcode acquisition, storage of resultsA wide variety of models supported through model registration
SST-304C Fully automatic / conveyor feed type
Website Inquiry
283, Aoya-cho, Minami-ku, Hamamatsu, 435-8568, JapanTEL +81-53-467-3601 FAX +81-53-467-3613
FA Division Sales section
URL : http://www.yamahafinetech.co.jp/en/
1050
(con
veye
r)( 1
630)
1275
850
1275
( 171
4)
1000
SST-304 series
Ultrasonic testerContact-free