Post on 22-Mar-2020
22 - 26 Mar 2020, Dubai
13 - 17 Dec 2020, Dubai
“REP logo, PMI & PMP are registered trademarks of Project Management Institute, Inc.”
ApprovedCentre
Concrete Structure Designingfor Industrial Projects
Introduction
Reinforced concrete structures are widely used in industrial
sector, especially in the onshore oil and gas fields. In industrial
projects, the structure design applications are different than
normal housing projects taught in educational / engineering
institutions. This GLOMACS Concrete Structure Designing for
Industrial Projects training course will fill the gap between the
academic knowledge and the professionalism for industrial
project design in general, and specifically for oil & gas and power
generation projects.
The basis of design for concrete structure for strength,
serviceability and robustness is considered in the course.
ACI, Eurocodes, UBC and ASCE codes will also be covered to
enable the participants choose suitable design method to
serve business safety and operability. The probability of failure,
specifically in ACI and Eurocodes, will be discussed and the key
steps in design and review design will be illustrated.
This GLOMACS training course on Concrete Structure Designing for Industrial Projects will feature:
• Review of Different Codes and Standards
• The Importance of Construction and Maintenance
• The Dynamic Analysis and Design for Concrete in the
Industrial Plant
• Industry Practice in the Structure Design
• Integration between Different Disciplines in Designing
• Effect of Sustainable Design to Enhance Project
Investment Lifecycle
Objectives
This GLOMACS training course is intended to provide the participants with:
• An overview of modern and effective procedures for the
design of reinforced concrete structures in the Oil & Gas
industry
• Knowledge on calculation for reinforced concrete
elements used in the Oil & Gas industry
• Increase the knowledge and assist in using new tools for
designing and reviewing the design for new project or
modify the existing one
• Knowledge on the design of foundation under all types of
vibrating equipment, and the blast design of buildings
• An illustration of real design issues that may assist the
designer to provide concrete structure that is safe,
economical and constructible
• The rule of thumb to check the concrete design with
associated check list
TRAINING METHODOLOGY
This GLOMACS Concrete Structure Designing for Industrial
Projects training seminar will utilise a variety of proven adult
learning techniques to ensure maximum understanding,
comprehension and retention of the information presented.
The daily workshops will be highly interactive and participative.
Videos and photos will be used for illustration.
Organisational Impact
• Reduce the engineering cost as the attendees will be
capable to do engineering in-house
• Reduce cost for repair and maintenance by enhancing
the repair methodology
• Improve the organization performance by knowing
the Up to date design and construction technique its
technical practice
• Improve the project cost and time by better controlling
the design stage
Personal Impact
• Enhance the concrete design capability of the trainee for
different foundation types
• Increase knowledge of up to date of execution phase
• Increase the skill for maintenance approach
• Increase the skill to enhance quality of all phases of the oil
and gas projects
Who Should Attend?
This GLOMACS Concrete Structure Designing for Industrial
Projects training course is intended to provide professionals
and engineers to be familiar with American Concrete Institute
Standard (ACI) and Eurocodes for concrete structure designing.
This GLOMACS training course will also be beneficial for junior
or senior level civil and structure engineers who need to have
in-depth knowledge about the structural engineering activities
and how to co-operate in the design phase.
Concrete Structure Designingfor Industrial Projects
DAY 1
• The Fundamentals of Concrete Technology
• Basic Concept of Concrete Design
• Main Features for ACI and European Standard EN
for Concrete Design
• Effects of Different Loads on the Building
• Earthquake, Wind Load Effect
• Loads Affect Pipe Rack, Static Equipment and
Tanks Foundations
• Principal, Limitations for Different Codes in
Concrete (ACI codes, European Code)
• Codes and Standards Philosophy
• Principal of Concrete Design and Precaution
• Different Structure Systems
• Different Slab Types
• The Way to Use the Suitable Structure System
DAY 2
• Loads Applied in Horizontal Vessel (Separators)
• Design of Vessel Foundation including Horizontal
and Vertical Types
• Loads Applied in Heaters
• Design of Heater Foundations
• Ring Beam Design for Circular Tank
• Pipeline Support Design
• Checklist to Review the Design
DAY 3
• Soil Investigation
• Shallow Foundation Design Philosophy & Design
• Pile Foundation Design Philosophy & Design
• Anchor Bolt Design
• Foundation under Machines Design Static &
Dynamic
• Checklist to Review Foundation under Rotating
Equipment
• Precaution in Design Foundation under Vibrating
Machines
• Design of Slab, Beam and Columns
• Design Blast Resistance Building such as Control
Room
• Control Room Layout and Configuration
DAY 4
• Pipe Rack Configuration
• Pipe Rack Foundation Design
• Retaining Walls Design
• Load and Force in Retaining Walls
• Retaining Walls Design Checks
DAY 5
• Design for Reinforced Concrete Liquid Tanks
including Different Types (underground, ground
and elevated) Tanks
• Structure System for Concrete Tanks
• Circular and Rectangular Tank
• Design of Foundation under Tower
• Maintenance and Repair in Concrete Structure
• Integrity and Maintenance Management System
Principle
Seminar Outline
REGISTRATION DETAILS
LAST NAME:________________________________________FIRST NAME:_______________________________________DESIGNATION:_____________________________________ COMPANY: ________________________________________ADDRESS: __________________________________________________________________________________________CITY:______________________________________________COUNTRY: ________________________________________TELEPHONE:______________________________________MOBILE: __________________________________________FAX:________________________________________________EMAIL:_____________________________________________
AUTHORISATION DETAILS
AUTHORISED BY:_____________________________________________________________________________________DESIGNATION:_____________________________________ COMPANY: ________________________________________ADDRESS: __________________________________________________________________________________________CITY:______________________________________________COUNTRY: ________________________________________TELEPHONE:______________________________________MOBILE: __________________________________________FAX:_____________________________________________EMAIL:_____________________________________________
PAYMENT DETAILS
q Please invoice my company q Cheque payable to GLOMACSq Please invoice me
CERTIFICATION
Successful participants will receive GLOMACS’ Certificate of Completion
P.O. Box 74653 Dubai, U.A.E.T: +971 (04) 425 0700 | F: +971 (04) 425 0701E: info@glomacs.com | W: www.glomacs.com
Connect withUs On LinkedIn
Scan the QR Code* to visit and
connect to our LinkedIn profile.
*Requires QR code reader/scanner applicationto be installed on your smartphone.
Code Date Venue FeesCC004 22 - 26 Mar 2020 Dubai $4,950
CC004 13 - 17 Dec 2020 Dubai $4,950
4 WAYS TO REGISTER
Tel: +971 (04) 425 0700 Fax: +971 (04) 425 0701Email: info@glomacs.comWebsite: www.glomacs.com
TERMS AND CONDITIONS
• Fees – Each fee is inclusive of Documentation, Lunch and refreshments served during the entire seminar.
• Mode of Payment – The delegate has the option to pay the course fee directly or request to send an invoice to his/her company/sponsor. Credit card and cheque payments are both acceptable.
• Cancellation / Substitution – Request for seminar cancellation must be made in writing & received three (3) weeks prior to the seminar date. A US$ 250.00 processing fee will be charged per delegate for each cancellation. Thereafter, we regret that we are unable to refund any fees due, although in such cases we would be happy to welcome a colleague who would substitute for you.
• Hotel Accommodation – is not included in the course fee. A reduced corporate rate and a limited number of rooms may be available for attendees wishing to stay at the hotel venue. Requests for hotel reservations should be made at least three (3) weeks prior to the commencement of the seminar. All hotel accommodation is strictly subject to availability and terms and conditions imposed by the hotel will apply.
• Attendance Certificate – a certificate of attendance will only be awarded to those delegates who successfully completed/attended the entire seminar including the awarding of applicable Continuing Professional Education Units/Hours.
• Force Majeure – any circumstances beyond the control of the Company may necessitate postponement, change of seminar venue or substitution of assigned Instructor. The Company reserves the right to exercise this clause and implement such amendments.
• Fair Access / Equal Opportunities – In the provision of its services as a world-class Training Provider, the Company is committed to provide fair access / equal opportunities throughout the delivery of its courses and assessment leading to the completion of training seminars, or 3rd party qualifications/certifications.
Concrete Structure Designingfor Industrial Projects