Post on 19-Jul-2020
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIASOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
Covering the world.Protecting the Earth.
Covering the world.Protecting the Earth.Headquarters
NORTH AMERICAN PLANT2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234Toll free in North America: 1.800.571.3904
ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600
SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999
COMPANYP R O F I L E
Rev
08.1
6
Solmax is not a design professional and has not performed any design services to determine if Solmax's goods comply with any project plans or speci�ications, or with the application or use of Solmax's goods to any particular system, project, purpose, installation or speci�ication.
TABLE OF CONTENTS
GENERAL PRESENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SOLMAX’S PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MANUFACTURING CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VARENNES | CANADA
PELABUHAN KLANG | MALAYSIA
BLOWN FILM PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PROJECT REFERENCES
WASTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
MINING - HEAP LEACH PAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
MINING - TAILING DAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
MINING - EVAPORATION PONDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
ENERGY - UNCONVENTIONAL GAS EXTRACTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ENERGY - SHALE GAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ENERGY - COAL ASH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ENERGY - COAL SEAM GAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ENERGY - PETROLEUM-OIL SANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ENERGY - BIOGAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
WATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
AQUACULTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
COM
PANY
PRO
FILE
| T
ABLE
OF
CONT
ENTS
2
TABLE OF CONTENTS
QUALITY CONTROL PLAN POLYETHYLENE GEOMEMBRANES MANUFACTURING
PROGRAM SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
QUALITY CONTROL STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
GENERAL FLOW CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
RAW MATERIAL QUALITY CONTROL
RESIN MANUFACTURERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
PRODUCT QUALITY REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
BATCH PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
RESIN AND ADDITIVE STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ROLL QUALITY CONTROL
MANUFACTURING PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MANUFACTURING QUALITY ASSURANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
TEST DATA AND ARCHIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
TEST EQUIPMENT CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
CONFORMANCE TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
IDENTIFICATION, HANDLING AND STORAGE
TRACEABILITY AND ROLL IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
ROLL HANDLING AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
CONTROL OF NON-CONFORMING PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
SOLMAX’S CERTIFICATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . APPENDIX A
COM
PANY
PRO
FILE
| T
ABLE
OF
CONT
ENTS
3
GENERAL PRESENTATIONSOLMAX is a worldwide leader in the manufacturing of PE GEOMEMBRANES and offers containment solutions . Manufactured from Canada and Malaysia, its products are sold in over 60 countries and are used by the biggest names in the mining, the energy, waste management, water, and civil engineering sectors . Solmax’s products are vital in protecting soils from contamination in applications as critical as the landfills of the world’s most populated cities to the tailings or heap leach pads of mines operating in environmentally fragile ecosystems .
VISION:Become the choice for the most “conscious” companies: Conscious about the environmental impact of their operating activities and conscious about the quality of our solutions . Our mission is to help them preserve the immense wealth that are water, earth and air .
Anticipate market needs and offer a balanced portfolio between commodities and value-added differentiated products .
Our commitment to excellence is absolute and “Made by Solmax” adds value recognized by our customers .
COM
PANY
PRO
FILE
| G
ENER
AL P
RESE
NTAT
ION
Covering the world. Protecting the Earth.
«»
MISSION:
PROTECT: Our goal: To reduce the environmental impact of human activity and protect natural resources…
CREATE: …by developing innovative products, systems or methods linked either directly or indirectly to plastics processing…
OPTIMIZE: …with the highest degree of effectiveness and at the lowest cost in order to make them as widely available as possible to improve the quality of life of individuals.
4
BRIEF CORPORATE HISTORY
1981 Solmax begins as a distributor of geosynthetic products in Canada .
1983 Solmax develops its know-how and specializes itself in the installation of a wide range of geosynthetics .
1989-1994 Solmax establishes geosynthetics installation branches in the United States, France, Chile and Venezuela .
1997 Solmax decides to vertically integrate and builds an HDPE and LLDPE geomembrane manufacturing plant as well as a PVC pre fabrication plant in North America .
2009 Solmax inaugurates a new geomembrane manufacturing plant in Asia
2011 Solmax establishes “Solmax Chile”, a pipe manufacturing and pipe accessories distribution branch in South America .
2013 Solmax keeps expanding by increasing its geomembrane manufacturing capacity in North America .
COM
PANY
PRO
FILE
| G
ENER
AL P
RESE
NTAT
ION
5
COM
PANY
PRO
FILE
| S
OLM
AX’
S PR
ODUC
TS
SOLMAX’S PRODUCTS Polyethylene geomembranes represent the most utilized geomembranes in the world . HDPE (High Density Polyethylene) and LLDPE (Linear Low Density Polyethylene) represent over 60% of all geomembranes used for the various containment applications . Polyethylene is the most common plastic and has an excellent chemical resistance, meaning that it is not attacked by strong acids or bases . For these reasons, it is a prime choice for most designers .
In North America, the white reflective finish is standard and is applied on all Solmax geomembranes at no additional cost for all products with a thicknesses of 60 mils or greater . As such the industry will benefit from:
Improved imperviousness of the active barrier Ease of installation Increased service life when exposed Increased proper backfilling time
6
HDPE SeriesSince 1997, Solmax has been manufacturing the HDPE Series and offers a standard product that meets or exceeds all the minimum requirements of the GM-13 specification developed by the GRI and is recognized across the world as the specification of choice for critical containment applications. HDPE geomembranes are the most commonly used liners for containment . They offer high mechanical strength properties as well as very high chemical resistance and UV resistance .
Metric Imperial
Roll Width 6 .8 - 8 .0 m 22 .3 – 26 .2 ft
Roll Thickness 0 .5 - 3 mm 20 – 120 mils
Standard Finish
Prime Finish
Certifications
Standard Characteristics
Smooth Single Textured
TexturedRough Textured (RT)
Extra Rough Textured (XRT)
Colored
White Reflective
Conductive
GAI-LAP, CE, Asqual, GRI-GM 13
Solmax HDPE Series
COM
PANY
PRO
FILE
| S
OLM
AX’
S PR
ODUC
TS
7
COM
PANY
PRO
FILE
| S
OLM
AX’
S PR
ODUC
TS LLPDE Series
Solmax manufactures the standard LLDPE Series that meets or exceeds the GRI GM-17 specifications, which are recognized as the worldwide standard for containment with LLDPE geomembranes .
LLDPE geomembranes have become increasingly popular in recent years . While being a little less resistant to mechanical and chemical stress than HDPE liners of the same thickness, they still offer good chemical and mechanical resistance . The main attribute of LLDPE making it more and more popular is its high flexibility allowing the liner to drape around any protrusions and imperfections of the existing terrain much better than with the stiffer HDPE geomembranes . Its different molecular structure makes it less brittle at low temperature . This allows for an improved stress crack resis-tance and a an easier weldability in cold weather conditions .
Metric Imperial
Roll Width 6 .8 - 8 .0 m 22 .3 – 26 .2 ft
Roll Thickness 0 .5 - 2 .5 mm 20 – 100 mils
Standard Finish
Prime Finish
Certifications
Standard Characteristics
Smooth Single sided TexturedRough Textured (RT)
Extra Rough Textured (XRT)
Colored
White Reflective
Conductive
GAI-LAP, CE, GRI-GM 17
Solmax LLDPE Series
8
COM
PANY
PRO
FILE
| S
OLM
AX’
S PR
ODUC
TS Premium HD Series
Adding to its current line-up of geomembranes that do not only meet but exceed industry standards, Solmax introduces the PREMIUM HD Series, durable high-density polyethylene (HDPE) geomembrane . The specially engineered formulation helps improve the material’s mechanical properties and enhance the endurance properties namely Stress Crack Resistance (SCR), Standard as well as High Pressure Oxidative Induction Time (OIT), thermal and UV resistance .
Metric Imperial
Roll Width 6 .8 - 8 .0 m 22 .3 – 26 .2 ft
Roll Thickness 1 .0 mm – 3 .0 mm 40 mils – 120 mils
Standard Finish
Prime Finish
Certifications
Standard Characteristics
Smooth Single sided TexturedRough Textured (RT)
Extra Rough Textured (XRT)
Colored
White Reflective
Conductive
GAI-LAP, CE, Asqual, GRI-GM 13
Solmax Premium HD Series
9
R3 SeriesThe R3 Series is Solmax’s latest innovation for the Oil & Gas Industry. It was specifically designed for containment in this industry . The new R3 Series is ROUGH. RESISTANT. 100% RECYCLABLE . This innovative liner offers the best containment, reduces slip and fall incidents, meets the highest performance standards in the industry and is 100% recyclable, thus reducing its environmental footprint . For all these reasons, whether it is part of the preventive measures under a drilling rig in the Utica Shale play, a fracking job in the Eagle Ford play or in a tank farm in Alberta, Solmax’s R3 Series is the best solution for any containment in the Oil & Gas industry .
Metric Imperial
Roll Width 6 .8 m 22 .3 ft
Roll Thickness 1 .0 - 1 .5 mm 40 – 60 mils
Standard Finish
Color
Certifications
Standard Characteristics
Top side textured
Black, Safety Green
EPA 9090, CE, GAI-LAP
Solmax R3 Series
Solmax’s research and development team is continuously striving to develop new products with enhanced properties
COM
PANY
PRO
FILE
| S
OLM
AX’
S PR
ODUC
TS
10
F3 SeriesAt Solmax, we understand that a flexible and weathering resistant geomembrane is in-line with our clients’ needs. But also, that factory-fabricated geomembranes hold tremendous advantages. They are cost-effective, time-efficient and improve the project’s overall quality . High-quality seams performed in a controlled environment are instrumental in completing an installation job successfully and in a timely fashion . With that in mind, Solmax brings to the market the F3 Series, geomembranes specifically formulated for fabricated polyethylene panels. Due to its outstanding FLEXIBILITY, the F3 Series is easy to FABRICATE and easy to FOLD and is sure to benefit the industry:
Excellent Flexibility Properties Proven Installation Efficiency Excellent Weathering Resistance Proven Folding Capabilities
Metric Imperial
Roll Width 6 .8 m 22 .3 ft
Roll Thickness 0 .75 - 1 mm 30 – 40 mils
Standard Finish
Color
Standard Characteristics
Smooth
Black
Solmax F3 Series
11
BioCoverPro SeriesSolmax’s all new BioCoverPro Series uses a special proprietary blend of HDPE resins and additives that enhance the technical benefits of HDPE liners.
Metric Imperial
Roll Width 8 .0 m 26 .2 ft
Roll Thickness 1 .0 - 2 .5 mm 40 – 100 mils
Standard Finish
Prime Finish
Standard Characteristics
Smooth
Tan
Solmax BioCoverPro Series
Exceptional high durability benefits include:
Excellent chemical resistance against organic waste mill effluent;
High mechanical strength against wind uplift ;
Great UV resistance;
Exceptional high flexibility benefits include:
Added flexibility: Ease of installation, welding quality and speed; Excellent multi-axial strains: more than twice the
industry norm;
Exceptional impermeability to organic waste mill effluent and CH4 migration;
Increased service life due to superior heat resistance;
Tan colored surface for cooler liner temperature .
Outstanding resistance to stress cracking: more than 3 times the industry standard .
12
Premium LLDPE SeriesSolmax’s Premium LLDPE Series is made of the best, most performing LLDPE resin available on the market . This Premium series by Solmax enhances all the benefits of standard LLDPE geomembranes. The geomembrane will be easier to weld, will be more resistant to oxidation and UV degradation, have an even better stress crack resistance and, most importantly, offer the best multi-axial deformation of an LLDPE geomembrane available on the market . While the GRI GM-17, standard specification for LLDPE geomembranes, requires typical LLDPE geomembranes to have a multi-axial deformation of at least 30%, Solmax’s Premium LLDPE Series offers a multi-axial deformation of at least 90% . This property addresses one of the main concerns in CCR capping designs, differential settlement of the CCR over time .
Solmax’s Premium LLDPE Series is the best LLDPE geomembrane available on the market to prevent tear or puncture in the geomembrane due to differential settlement . It also has a proprietary blend of additives which will increase the UV resistance and slow down the oxidation of the geomembrane, making it longer lasting than any other LLDPE geomembranes available .
Finally, Solmax’s Premium LLDPE Series is offered in White Reflective Prime Finish to reduce the effects of the heat on the liner, such as wrinkles, shorter life span and weldability issues . Also, it allows for additional and easy quality control .
Metric Imperial
Roll Width 6 .0 - 8 .0 m 22 .3 – 26 .2 ft
Roll Thickness 1 - 2 .5 mm 40 – 100 mils
Standard Finish
Prime Finish
Standard Characteristics
Smooth , TexturedRough Textured
White ReflectiveConductive
Premium LLDPE Series
13
EZ FIX SeriesBorn from the desire to ease its clients’ work and make its products more accessible, SOLMAX is pleased to provide theEZ-FIX Series, a series of product targeted to make the life of every installer easier .
As an industry leader and innovator in Geosynthetics, SOLMAX does not only care about the quality of its products and their continuous improvement but also their practical use .
Metric Imperial
Roll Width 6 .8 m 22 .3 ft
Roll Thickness 0 .75 - 1 mm 30 – 40 mils
Standard Finish
Color
Standard Characteristics
Smooth Top side textured
Safety GreenBlack
Solmax EZ FIX
14
PVC SeriesSolmax has been prefabricating the PVC Series geomembranes for over 25 years, while much less chemically resistant than Polyethylene geomembranes, PVC liners still offer great chemical resistance to products such as salt. Their high flexibility and elasticity allows the prefabrication of panels which reduces field seaming. Their low thermal expansion coefficient reduces the wrinkles and chances of damaging the liner during installation.
Metric Imperial
Panel Size Up to 4,500 m2 Up to 48,500 sq . ft .
Panel Thickness 0 .25 - 1 .5 mm 20 - 60 mils
Grade
Color
Certifications
Standard Characteristics
Standard ASTM D-7176
Fish Grade
Potable Grade (NSF61)
White
Grey
Black
GAI-LAP, CE
Solmax PVC Series
In order to ensure the excellence of its products, all of Solmax’s laboratories are certified under the internationally recognized GAI-LAP program of the Geosynthetics Institute .
Solmax has very stringent quality control procedures at all levels; production, sales, technical support, logistics and customer service . Its products are traceable from the moment of production to installation .
This gives Solmax a competitive advantage in ensuring customer satisfaction in over 60 countries . CO
MPA
NY P
ROFI
LE |
SOL
MA
X’S
PROD
UCTS
15
MANAGEMENT
Mr. Jean-Louis Vangeluwe, MBAPresident Solmax International and Solmax International Asia Pacific
Mr . Vangeluwe is a graduate of the Grande École de Commerce de Nice, Sophia-Antipolis and holds an MBA from the École des Hautes Études Commerciales de Montréal . Mr . Vangeluwe has been involved with Solmax since 1997, primarily in the development of the international sales network in Europe, Russia, Asia, South America, Africa and the Middle East . As General Manager for Solmax from 2008 to 2012 and since 2014, his objective as President has been to strengthen the Company’s profitability and growth.
Ms. Johanne Bélanger, CAVice President Finance and Administration
Ms . Bélanger is a graduate of the École des Hautes Études Commerciales de Montréal and has a degree in Accounting . She is also a chartered accountant, a member of the Ordre des Comptables Agréés du Québec and a member of the Canadian Institute of Chartered Accountants . Before joining Solmax in 1998, Ms . Bélanger was employed by a chartered accounting firm as a Senior Accountant and Audit Director. Ms. Bélanger is in charge of the Company’s finances, information systems and Human Resources Department .
Mr. Dominic Bérubé, Eng.General Manager - Pipes and Accessories, Solmax Chile
Mr . Bérubé has a Bachelor of Civil Engineering degree from the École des Technologies Supérieures de Montréal . He began his career in the geosynthetics industry in 1992 as a field engineer for Solmax, before joining the Sales Department . Mr . Bérubé has built up vast expertise in construction and has participated in Solmax’s international development, particularly in South America. Today, he directs the Chilean business unit which specializes in fluid transportation, more specifically pipes, valves and other accessories.
Mr. Guy Élie, Eng.Vice President - Quality, Technical Services & Operations
Mr . Élie is a graduate of the École des Technologies Supérieures de Montréal and holds a degree in Civil Engineering and Construction Technology . Mr . Élie has been with Solmax since 1991 and has developed a vast and deep knowledge of construction, polymers science and manufacturing management in relation to geomembranes . He also oversees, directly or indirectly, procurement of raw materials and the quality of Solmax’s products, and plays a key role in the R&D group .
Mr. David Cao, M.Sc.Vice President Innovation - Asia-Pacific
Mr . Cao is a graduate of Shanghai Fudan University and the Université de Montréal . He has two Master’s degrees in Polymer Chemistry . Before joining Solmax in 2005, Mr . Cao worked as General Manager for Shanghai Besden Fine Chemicals in China and as R&D Officer for Merck Frost in Canada. He developed strong skills in setting up trade networks for many Canadian companies in China and Southeast Asia . He currently directs the Sales, Customer Service and Logistics Departments for all of Solmax’s activities in the Asian-Pacific region.
COM
PANY
PRO
FILE
| M
ANA
GEM
ENT
16
Mr. Paul PayeurSales Manager AmericasMr . Payeur is a Civil Engineer Technician and has been with Solmax since 1989 primarily involved in the development of the Sales Network in the Americas, UK, Africa, Middle-East, and Australia . Today he directs the Sales for all of Solmax’s activities in the Americas .
Mr. Jason ZhouSales Manager - Asia-PacificMr . Jason Zhou majored in international trading at University of Shanghai for Science and Technology, he has been with Solmax for the past 7 years and helped to developing the Chinese market . Today he directs the sales department for China, Japan and the whole south East Asian territory .
Mr. Allan JacksonBusiness Development Manager-InternationalMr . Jackson is a Civil Engineer with over 25 years experience in Geosynthetics, Construction, & Heavy Civil Engineering, throughout Europe, Russia, and North Africa . Hi is responsible for business development and the sales network throughout, Europe, Russia, Africa, Middle East, and Australasia .
COM
PANY
PRO
FILE
| M
ANA
GEM
ENT
Mr. Dominic Bérubé, Eng.General Manager
Pipes & accessories, Solmax Chile
Ms. Johanne Bélanger, CAVice President
Finance & Administration
Mr. David Cao, M.Sc.Vice President Innovation
Asia-Paci�ic
Mr. Jason ZhouSales Manager
Asia-Paci�ic
Mr. Jean-Louis Vangeluwe, MBAPresident Solmax International
& Solmax International Asia Paci�ic
Mr. Jacques Côté, Eng.President, Group Solmax
Mr. Paul PayeurSales Manager
Americas
Mr. Allan JacksonBusiness Development
Manager, International
Mr. Guy Élie, Eng.Vice President
Quality, Technical Services & Operations
17
COM
PANY
PRO
FILE
| M
ANU
FACT
URIN
G CA
PAB
ILIT
IES
MANUFACTURING CAPABILITIES Solmax’s manufacturing plants (Canada and Malaysia) have several blown film extruders producing many types of polyethylene geomembranes . Solmax processes various types of resins including High Density Polyethylene (HDPE) and other polyethylene configurations such as Linear Low Density Polyethylene (LLDPE) . All of Solmax’s product series can be manufactured with different standard finishes such as smooth or textured surfaces. In addition to these, our product series can be colored, reflective and conductive. These value added geomembranes offer technical and financial advantages that will improve the performance of any project .
18
COM
PANY
PRO
FILE
| B
LOW
N FI
LM P
ROCE
SSBLOWN FILM PROCESS
During the production process, all of Solmax’s laboratories and manufacturing plants are staffed with technical experts who ensure that all products meet Solmax’s stringent quality standards .
Nip Rolls
Collapsing Frame
BubbleResin Pellets
Hopper
ExtruderIdler Roll
Idler Roll
Die
Air Ring
Roll of Film
Lay�lat
BASIC BLOWN FILM LINE
19
Location: United States, North America Material: Solmax LLDPE Series
- Finish: Textured - Prime Finish: White Reflective - Thickness: 1 .0 mm | 40 mils Surface Area: 88,902 m2 | 956,933 sqft
Manufacturing Plant: Canada
LANDFILL
Location: USA, North America Material: Solmax HDPE Series
- Finish: Textured - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 135,805m2 | 1,461,771 sqft
Manufacturing Plant: Canada
LANDFILL
PROJ
ECT
REFE
RENC
ES |
WA
STE
20
Location: Sweden, Europe Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 17,000 m2 | 182,986 sqft
Manufacturing Plant: Canada
LANDFILL
Location: Australia , Oceania Material: Solmax LLDPE Series
- Finish: Smooth & Textured - Thickness: 1 .0 mm | 40 mils Surface Area: 170,000 m2 | 1,829,864 sqft
Manufacturing Plant: Canada
LANDFILL
PROJ
ECT
REFE
RENC
ES |
WA
STE
21
Location: USA, North America Material: Solmax HDPE Series
- Finish: Rough Textured - Thickness: 1 .5 mm | 60 mils Surface Area: 128,258 m2 | 1,380,560 sqft
Manufacturing Plant: Canada
LANDFILL
Location: Japan, Asia Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 80,850 m2 | 870,262 sqft
Manufacturing Plant: Malaysia
LANDFILL
PROJ
ECT
REFE
RENC
ES |
WA
STE
22
PROJ
ECT
REFE
RENC
ES |
WA
STE
Location: South Africa, Africa Material: Solmax HDPE Series &
LLDPE Series - Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 214,100 m2 | 2,304,553 sqft Manufacturing Plant: Canada
LANDFILL
Location: South Wales, Europe Material: Solmax LLDPE Series
- Finish: Textured - Thickness: 1 .0 mm | 40 mils Surface Area: 59,000 m2 | 635,070 sqft Manufacturing Plant: Canada
LANDFILL Location: Qatar, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 2 .0 mm | 80 mils Surface Area: 800,000 m2 | 8,611,128 sqft Manufacturing Plant: Canada
LANDFILL
Location: Russia, Europe Material: Solmax HDPE Series
- Finish: Textured - Thickness: 2 .0 mm | 80 mils Surface Area: 196,560 m2 | 2,115,754 sqft Manufacturing Plant: Malaysia
LANDFILL
23
PROJ
ECT
REFE
RENC
ES |
WA
STE Location: Canada, North America
Material: Solmax HDPE Series - Finish: Textured - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 37,000 m2 | 400,000 sqft Manufacturing Plant: Canada
HAZARDOUS WASTE CELL
Location: USA, North America Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 135,700 m2 | 1,461,000 sqft Manufacturing Plant: Canada
WASTE CELL
24
PROJ
ECT
REFE
RENC
ES |
WA
STE
Location: Chile, South America Material: Solmax HDPE Series
- Finish: Smooth & Textured - Prime Finish: White Reflective - Thickness: 1 .5mm | 60 mils & 1mm | 40 mils Surface Area: 63,500 m2/ 684,400 sqft Manufacturing Plant: Canada
LANDFILL CAPPING
Location: Canada, North America Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 135,700 m2 | 1,461,000 sqft Manufacturing Plant: Canada
WASTE CELL
Location: USA, North America Material: Solmax HDPE Series
- Finish: Textured - Prime Finish: White Reflective - Thickness: 1 .5mm | 60 mils Surface Area: 371,421 m2 | 3,997,944 sqft Manufacturing Plant: Canada
SANITARY LANDFILL
25
Location: Canada, North America Material: Solmax LLDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 2 .0 mm | 80 mils Surface Area: 109,936 m2 | 1,183,341 sqft Manufacturing Plant: Canada
NUNAVIk NICkEL MINE
Location: Mexico, North America Material: Solmax LLDPE Series
- Finish: Textured - Thickness: 2 .0 mm | 80 mils Surface Area: 400,000 m2 | 4,305,564 sqft Manufacturing Plant: Canada
GOLD & SILVER MINE
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- HE
AP
LEA
CH P
AD
26
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- HE
AP
LEA
CH P
AD
Location: China, Asia Material: Solmax HDPE Series
- Finish: Smooth & Rough Textured - Thickness: 2 .0 mm | 80 mils Surface Area: 696,360 m2 | 7,495,556 sqft Manufacturing Plant: Malaysia
GOLD MINE
Location: Ghana, Africa Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 390,000 m2 | 4,197,925 sqft Manufacturing Plant: Canada
GOLD MINE Location: Russia, Europe Material: Solmax HDPE Series & LLDPE Series
- Finish: Smooth & Single Sided Textured - Thickness: 1 .0 - 1 .5 mm | 40-60 mils Surface Area: 2,830,057 m2 | 30,462,478 sqft Manufacturing Plant: Malaysia
GOLD MINE
Location: Peru, South America Material: Solmax HDPE Series &
LLDPE Series - Finish: Smooth - Thickness: 1 .5 – 2 .0 mm | 60-80 mils Surface Area: 444,224 m2 | 4,781,587 sqft Manufacturing Plant: Canada
GOLD MINE
27
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- TA
ILIN
G DA
MS Location: Canada, North America
Material: Solmax LLDPE Series - Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 323,340 m2 | 3,480,402 sqft Manufacturing Plant: Canada
GOLD & COPPER MINE
Location: Peru, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 165,981 m2 | 1,786,604 sqft Manufacturing Plant: Canada
SILVER, ZINC & COPPER MINE
28
Location: Russia, Europe Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .0 mm | 40 mils Surface Area: 1,400,000 m2 | 15,069,473 sqft Manufacturing Plant: Canada
BAUXITE & ALUMINIUM MINE
Location: Thailand, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .0 mm | 40 mils Surface Area: 806,400 m2 | 8,680,017 sqft Manufacturing Plant: Malaysia
GOLD MINE
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- TA
ILIN
G DA
MS
29
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- T
AIL
ING
DAM
S Location: Burkina Faso, Africa Material: Solmax HDPE Series
- Finish: Textured - Thickness: 1 .0 mm | 40 mils Surface Area: 120,000 m2 | 1,291,670 sqft Manufacturing Plant: Canada
GOLD MINE
Location: USA, North America Material: Solmax HDPE Series
- Finish: Smooth/Textured - Prime Finish: White Reflective/Conductive - Thickness: 1 .5 mm | 60 mils Surface Area: 162,350 m2 | 2,574,150 sqft Manufacturing Plant: Canada
BAUXITE MINE
30
Location: Australia, Oceania Material: Solmax HDPE Series
- Finish: Smooth & Textured - Prime Finish: White Reflective - Thickness: 1 .5mm | 60 mils Surface Area: 1,475,000 m2 / 15 871 000 sqft Manufacturing Plant: Malaysia
BAUXITE MINE Location: USA, North America Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Prime Finish: Conductive - Thickness: 2mm | 80 mils Surface Area: 91,773 m2 / 987,480 sqft Manufacturing Plant: Canada
GOLD MINE
Location: Russia, Europe Material: Solmax HDPE Series
- Finish: Smooth & Textured - Thickness: 1 .5-2 .0 mm | 60-80 mils Surface Area: 61,578 m2 | 662,500 sqft Manufacturing Plant: Canada
POTASSIUM SALT MINE Location: Chile, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 1,385,000 m2 | 14,902,600 sqft Manufacturing Plant: Canada
IODINE MINE
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- EV
APO
RATI
ON P
ONDS
31
Location: Chile, South America Material: Solmax PVC Series
- Thickness: 0 .75 mm | 30 mils Surface Area: 34,000,000 m2 | 365,972,940 sqft Manufacturing Plant: Canada
SODIUM CHLORIDE SALTS, POTASSIUM, LITHIUM & BORIC ACIDS EVAPORATION PONDS
Location: Chile, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .0 mm | 40 mils Surface Area: 1,086,223 m2 | 11,692,006 sqft Manufacturing Plant: Canada
IODINE SALTS EVAPORATION PONDS
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- EVA
PORA
TION
PON
DS
32
Location: Indonesia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .5 mm | 20 mils Surface Area: 1,960,000 m2 | 21,097,263 sqft Manufacturing Plant: Malaysia
SALTS EVAPORATION PONDS
Location: Chile, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .0 – 1 .5 mm | 40 – 60 mils Surface Area: 43,107 m2 | 464,000 sqft Manufacturing Plant: Canada
LITHIUM EVAPORATION PONDS
PROJ
ECT
REFE
RENC
ES |
MIN
ING
- EVA
PORA
TION
PON
DS
33
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- UNC
ONVE
NTIO
NAL
GAS
EXTR
ACTI
ON Location: USA, North America Material: Solmax LLDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .0 mm | 40 mils Surface Area: 4,180 m2 | 45,000 sqft Manufacturing Plant: Canada
EQT ROSEMOUNT
Location: USA, North America Material: Solmax LLDPE Series
- Finish: Smooth - Thickness: 1 .0 mm | 40 mils Surface Area: 58,190 m2 | 626,352 sqft Manufacturing Plant: Canada
GULFPORT IMPOUNDMENT
34
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- SHA
LE G
AS Location: USA, North America Material: Solmax R3 Series
- Finish: Single Sided Textured - Prime Finish: Safety Green - Thickness: 1 .5 mm | 60 mils Surface Area: 243,180 m2 | 2,617,600 sqft Manufacturing Plant: Canada
DRILLING PADS
Location: USA, North America Material: Solmax LLDPE Series
- Finish: Smooth/Textured - Prime Finish: White Reflective - Thickness: 1 .0 - 1 .5 mm | 40 - 60 mils Surface Area: 117,200 m2 | 1,260,000 sqft Manufacturing Plant: Canada
ABOVE GROUND STORAGE TANkS
35
Location: Guatemala, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 59,279 m2 | 638,074 sqft Manufacturing Plant: Canada
COAL ASH RESIDUE PONDS
Location: Canada, North America Material: Solmax LLDPE Series
- Finish: Textured - Thickness: 1 .0mm | 40 mils Surface Area: 203,660 m2 | 2,191,446 sqft Manufacturing Plant: Canada
NOVA SCOTIA POWER ASH DISPOSAL CLOSURE Location: India, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .75 mm | 30 mils Surface Area: 900,000 m2 | 9,687,519 sqft Manufacturing Plant: Malaysia
COAL ASH RESIDUE PONDS - DHENkANAL
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- COA
L AS
H
36
Location: Australia, Oceania Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 2 .0 mm | 80 mils Surface Area: 840,000 m2 | 9,041,684 sqft Manufacturing Plant: Malaysia
COAL SEAM GAS - SURAT BASSIN
Location: Australia, Oceania Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: Conductive - Thickness: 1 .5 mm | 60 mils Surface Area: 241,428 m2 | 2,598,709 sqft Manufacturing Plant: Canada
DAANDINE BRINE POND Location: Australia, Oceania Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Prime Finish: White Reflective - Thickness: 1 .5 mm | 60 mils Surface Area: 546,810 m2 | 5,885,813 sqft Manufacturing Plant: Malaysia
COAL SEAM GAS - REEDY CREEk
Location: Australia, Oceania Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Prime Finish: White Reflective - Thickness: 1 .5 | 60 mils Surface Area: 1,015,420 m2 | 10,929,889 sqft Manufacturing Plant: Malaysia
COAL SEAM GAS - SPRING SULLY PONDS
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- COA
L SE
AM G
AS
37
Location: Qatar, Asia Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Thickness: 1 .5 – 3 .0 mm | 60 – 120 mils Surface Area: 360,000 m2 | 3,875,007 sqft Manufacturing Plant: Canada
SHELL PETROLEUM & QATAR PETROLEUM
Location: Canada, North America Material: Solmax HDPE Series
- Finish: Single Sided Textured & Textured - Thickness: 1 .5 – 2 .0 mm | 60 – 80 mils Surface Area: 178,252 m2 | 1,918,688 sqft Manufacturing Plant: Canada
PETROLEUM OIL SANDSFORT MCMURRAY
Location: Canada, North America Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Thickness: 1 .5 – 2 .0 mm | 60 – 80 mils Surface Area: 160,050 m2 | 1,722,138 sqft Manufacturing Plant: Canada
PETROLEUM INDUSTRIAL GAS PONDkEYERA
Location: Russia, Europe Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .0 mm | 40 mils Surface Area: 103,400 m2 | 1,112,988 sqft Manufacturing Plant: Canada
TANkER CARGO COMPLEX
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- PE
TROL
EUM
-OIL
SAN
DS
38
Location: USA, North America Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5mm | 60 mils Surface Area: 176,137 m2 | 1,895,924 sqft Manufacturing Plant: Canada
PETROLIUM-OIL SANDS Location: Canada, North America Material: Solmax HDPE Series
- Finish: Smooth & Textured - Thickness: 1 .5mm | 60 mils Surface Area: 100,571 m2 | 1,082,144 sqft Manufacturing Plant: Canada
IOL NABIYE
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- PE
TROL
EUM
-OIL
SAN
DS Location: Canada, North America Material: Solmax HDPE Series
- Finish: Smooth & Single Sided Textured - Prime Finish: White Reflective & Conductive - Thickness: 1 .5mm | 60 mils Surface Area: 740,806 m2 | 7,973,969 sqft Manufacturing Plant: Canada
OIL SANDS EXTRACTION
39
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- BI
OGAS
- B
IODI
GEST
ER P
OND Location: Malaysia, Asia
Material: Solmax HDPE Series - Finish: Smooth - Thickness: 1 .0-1 .5mm | 40-60 mils Surface Area: 38,086 m2 | 410,000 sqft Manufacturing Plant: Malaysia
ES BIO ENERGY
Location: Malaysia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5mm | 60 mils Surface Area: 16,800 m2 | 181,000 sqft Manufacturing Plant: Malaysia
CRYSTAL LAGOON
40
PROJ
ECT
REFE
RENC
ES |
ENE
RGY
- BI
OGAS
- B
IODI
GEST
ER P
OND Location: Thailand, Asia
Material: Solmax HDPE Series - Finish: Smooth - Prime Finish: White Reflective - Thickness: 1 .5-2 .0 mm | 60-80 mils Surface Area: 12,880 m2 | 139,000 sqft Manufacturing Plant: Malaysia
EPC BIOGAS
Location: Malaysia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 1 .5 mm | 60 mils Surface Area: 16,800 m2 | 181,000 sqft Manufacturing Plant: Malaysia
BIODIGESTER POND
41
Location: New Zealand, Oceania Material: Solmax HDPE Series
- Finish: Single Sided Textured - Thickness: 1 .5 mm | 60 mils Surface Area: 976,720 m2 | 10,513,326 sqft Manufacturing Plant: Malaysia
CENTRAL PLAIN WATER CANAL
Location: USA, North America Material: Solmax HDPE Series
- Finish: Single Sided Textured - Thickness: 1 .5 mm | 60 mils Surface Area: 3,500 m2 | 38,000 sqft Manufacturing Plant: Canada
WATER TREATMENT PLANT
PROJ
ECT
REFE
RENC
ES |
WAT
ER
42
PROJ
ECT
REFE
RENC
ES |
WAT
ER Location: United Kingdom, Europe Material: Solmax HDPE Series
- Finish: Single Sided Textured - Prime Finish: Tan - Thickness: 2 .5 mm | 120 mils Surface Area: 37,600 m2 | 404,700 sqft Manufacturing Plant: Canada
WAVEGARDEN SURF LAGOON
Location: New Zealand, Oceania Material: Solmax HDPE Series
- Finish: Single Sided Textured - Thickness: 1 .5 mm | 60 mils Surface Area: 35,700 m2 | 461,000 sqft Manufacturing Plant: Malaysia
IRRIGATION PONDS
43
PROJ
ECT
REFE
RENC
ES |
AQU
ACUL
TURE
Location: Philippines, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .50 mm | 20 mils Surface Area: 168,600 m2 | 1,808,000 sqft
Manufacturing Plant: Malaysia
FISH FARMS
Location: Indonesia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .50 mm | 20 mils Surface Area: 201,600 m2 | 2,170,000 sqft
Manufacturing Plant: Malaysia
FISH FARMS
Location: Indonesia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .50 mm | 20 mils Surface Area: 168,000 m2 | 1,808,000 sqft
Manufacturing Plant: Malaysia
FISH FARMS
Location: Brunei, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .65 mm | 25 mils Surface Area: 189,000 m2 | 2,034,300 sqft
Manufacturing Plant: Malaysia
FISH FARMS
44
Location: Vietnam, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .5 – 1 .5 mm | 20 – 60 mils Surface Area: 200,000 m2 | 2,152,782 sqft Manufacturing Plant: Malaysia
BIM SHRIMP FARM
Location: Nicaragua, South America Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .75 mm | 30 mils Surface Area: 1,077,752 m2 | 11,600,825 ft2
Manufacturing Plant: Canada
CAMANICA SHRIMP FARM Location: Malaysia, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .65 mm | 25 mils Surface Area: 825,800 m2 | 8,888,836 sqft
Manufacturing Plant: Malaysia
kERPAN SHRIMP FARM
PROJ
ECT
REFE
RENC
ES |
AQU
ACUL
TURE
Location: Philippines, Asia Material: Solmax HDPE Series
- Finish: Smooth - Thickness: 0 .50 mm | 20 mils Surface Area: 168,600 m2 | 1,808,000 sqft
Manufacturing Plant: Malaysia
45
QUALITY CONTROL PLANPOLYETHYLENE GEOMEMBRANES
MANUFACTURING
PROGRAM SCOPEThe present manual was developed and implemented by Solmax International Inc ., in order to describe the plant quality control procedures . This manual provides an overview of all the quality control procedures, from resin selection (including reception and storage) to roll manufacturing (including identification, material flaws, manipulation and storage).
QUALITY CONTROL STRUCTURESolmax has an on-site quality assurance laboratory at each manufacturing facility . Each laboratory is equipped, well-staffed and operates 24 hours a day, 365 days per year to maintain a high level of quality and up-to-the-minute results of Solmax’s finished products.
To ensure that only products meeting Solmax and/or the customer’s requirements are produced, qualified and experienced Quality Control personnel are responsible for monitoring, testing and providing feedback to the production teams . For each manufacturing site, the Quality Control team is made up of technicians, engineers, plant managers and reports directly to the Vice President Quality, Operations & Technical Services .
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
46
GENERAL FLOW CHART
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
YES
Resin Reception By train or truck
SamplingOn each delivery
for quality control
Resin pumpingIn one of the silos,
for production uses.
Return of theresin to supplier
Laboratory testingDensity, ASTM D-1505
Melt Index ASTM D-1278 (Condition E & F)
Geomembrane ProductionVisual inspection of the �inal product.Veri�ication of production parameters
Veri�ication of thickness characteristics
Resin meets the
speci�ications?
Resin meetsthe visual inspections?
Geomembranemeets technicalspeci�ications?
NO
NO
YES
YES
Geomembrane samplingA sample measuring 30 cm
x roll width is to be removed from each roll
and allowed acclimatize to standard laboratory
conditions for testing.
Laboratory testingEach roll is controlled in
accordance with the methods and frequencies speci�ied on the technical
data sheet.
Final PreparationUpon approval of a
laboratory technician, the roll is identi�ied with 3
labels and then placed in the designated area, until
delivered to client.
CLIENT
Non-compliant productThe roll will be identi�ied as
non-complying andre-evaluated by the
Technical department
47
RAW MATERIAL QUALITY CONTROL
Solmax uses resin from internationally recognized resin manufacturers . Upon reception, each lot is given a batch number to ease identification and traceability of raw materials. The incoming resin used by Solmax is monitored by Solmax’ Quality Control Department .
RESIN MANUFACTURERSThe resin manufacturers need to provide quality control data documentation to Solmax, confirming for each lot that the raw materials test results comply with Solmax specifications for the following properties:
The carbon black content is applicable if the resin is preblended (Carbon Black Content specification ASTM D4218). When the resin is not preblent, carbon black is added during the production of the geomembrane roll .
PRODUCT QUALITY REPORTEach lot of raw material and of carbon black material from a supplier is accompanied by an analysis certificate. A copy of this report is sent directly to the quality control department for approval before use .
RESIN AND ADDITIVE STORAGEThe resin colorants and additives are stored in a manner to allow preservation of their properties, traceability of materials, and to use on a first in first out basis.
BATCH PREPARATIONAt Solmax, all resin & carbon black are carried by vacuum system to avoid any contamination . In addition to the QA/QC standard procedure and upon specific request of a project, we at Solmax confirm that:
1. The virgin resin shall be mixed with the appropriate amount of carbon black, as per the project specification. 2 . Carbon Black content is to be monitored during production . 3. Rolls which fail to meet the specification for carbon black are discarded.
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
Density ASTM D 1505 / D792Melt Index ASTM D 1238 Condition EOxidative Induction Time (OIT) ASTM D-3895
Property Test Method
48
ROLL QUALITY CONTROL
MANUFACTURING PROCESSES Solmax international has two manufacturing plants for polyethylene geomembranes. The first one is located in Varennes, Québec, Canada, on the south-shore of Montréal. The plant comprises of three film production units: 2 three layers co-extruded production lines and 1 single layer production line . The plant has a total geomembrane production capacity of approximately 36 million kg annually .
The second plant, Pelabuhan Klang, Malaysia, is equipped with 2 three layers co-extruded production units and has a production capacity of approximately 27 million kg annually .
These equipments can produce all the common types of polyethylene geomembrane ranging from 6 .15 to 8 m in width, with thicknesses between 0 .5 and 3 .0 mm . Solmax is able to transform several types of resins, including High Density Polyethylene (HDPE) and other polyethylene configuration, as well as linear low density polyethylene (LLDPE). All these resins can be used in the manufacturing of smooth or textured (on one or both sides, in order to improve the friction properties) geomembranes .
MANUFACTURING QUALITY ASSURANCESolmax’s manufacturing Quality Control policy is to adhere to the highest standards of quality . All employees are required to strictly adhere to all published Quality Control standards at all times . Quality Assurance is an attitude that must prevail among all employees and that attitude, coupled with a strong Quality Control program, will ensure the highest quality of product possible .
Solmax quality assurance department assures that only products meeting Solmax and/or the customer’s requirements are released for shipment . Solmax’s Quality Control and research laboratory will perform simultaneous testing to assure control over all products . The laboratory will also be capable of supporting manufacturing, product development, and research needs . To this end, Solmax is sensitive to Quality Assurance suggestions from its personnel, and welcomes the suggestions of its customers .
The production of rolls is monitored and rolls are periodically inspected visually for identification of all repetitive defects by Solmax QC Inspectors as well as Operators. Any roll identified as nonconforming is set aside and stored separately.
The production lines are equipped with holes detectors (spark tester) into which all materials go before being wound into rolls . If there is a hole in the geomembrane sheet, an alarm advises the operators who discards the roll .
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
49
1 . Geomembrane tests are to be conducted in accordance with Solmax technical data sheet and/or the project specifications. The information concerning the tests, test methods, specifications, testing frequencies and minimum values are indicated on the technical data sheet .
2 . For each roll produced, a sample measuring 30 cm x roll width is to be removed and allowed to acclimatize to standard laboratory testing conditions .
3 . Standardized dies are used to prepare the testing specimens . Dies are to be inspected for imperfections on a punctual basis . Dies not meeting ASTM Standards are rejected .
TEST DATA AND ARCHIVESFor each roll produced, a sample is identified and kept for archive.
Tests results are stored in a database to allow traceability and to issue conformity certificates. Test reports are also available upon customers’ request .
TEST EQUIPMENT CALIBRATIONIn accordance with the industry’s best practices, Solmax International is also responsible for ensuring that:
Appropriate test equipment of required accuracy and precision is used to ensure that accurate tests and measurements are conducted in accordance with the properties of the materials specified;
Equipment is uniquely identified, kept and used in the correct manner/environment and that it is secure.
All laboratory equipment is routinely checked to ensure proper operating conditions and calibration . They are periodically calibrated;
Calibration procedures and record calibrations are established, documented and filed;
CONFORMANCE TESTING
The QAC will review the test data results from Solmax . If necessary, they can select random samples for conformance testing .
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
50
IDENTIFICATION, HANDLING AND STORAGE
TRACEABILITY AND ROLL IDENTIFICATION Each manufactured geomebrane roll is given a unique roll number . All manufacturing and quality control data relative to each roll is stored in the same database, under the roll number. This identification allows full traceability. Three labels identify each roll: one inside the core and two others under the first wrap of material, directly on the geomembrane sheet, at each end of the roll . These labels show the roll number, resin blend, product code, dimensions, weight and date of manufacture .
ROLL HANDLING AND STORAGEThe equipment used to handle the rolls must allow the handling, with ease, of a 2270 kg (5000 lbs) roll, without damaging it . Each roll is equipped with two polyester or nylon slings to allow for it to be handled properly . It is also possible to introduce a lift truck’s metal axis in the roll core to move it .
The polyethylene geomembrane rolls do not need a protective wrapping for outside storage . The geomembrane rolls can be stacked up to 4 rolls high for smooth geomembrane and up to 3 rolls high for textured geomembrane, without crushing the inside of the roll . They should not be placed in mud or in any places where there is an excess of water, or other kind of materials that could damage the geomembrane .
Prior to being shipped, each roll must be visually inspected and approved for transport .
CONTROL OF NON-CONFORMING PRODUCT
Any material showing damages, such as holes or not meeting the specifications are identified as non-conforming and stored apart from others . Depending on the problem, the non-conforming rolls are either downgraded or recycled .
COM
PANY
PRO
FILE
| Q
UALI
TY C
ONTR
OL P
LAN
51
ANNEX A
SOLMAX’S CERTIFICATIONS
Certificate CA06/3886. 0 1
The management system of
Solmax International Inc. Lot 28, Jalan Sungai Pi nang 4/2, Taman Perindustrian Pulau Indah, Fasa
28, Mukim Klang, 42920 Pelabuhan Klang,
Selangor Darul Ehsan, Malaysia has been assessed and certified as meeting the requirements of
ISO 14001 :2004 For the following activities
Polyethylene geomembrane and extrusion rods manufacturing and commercialization, PVC geomembrane pre-assembling and commercialization.
Further clarifications regarding the scope of this certificate and the applicability of ISO 14001 :2004 requirements may be obtained by consulting the organization
This certificate is valid from 19 July 2015 until 19 July 2018 and remains valid subject to satisfactory surveillance audits.
Recertification audit due a minimum of 60 days before the expiration date. Issue 5 : 21 July 2015. Certified since: July 2006
Multiple certificates have been issued for this scope The main certificate is numbered CA06/3886.00
Authorized by
John Woodman Senior Vice President SSC. North America
SGS Systems & Services Certification, a Division of SGS North America, Inc. 201 Route 17 North, Rutherford, NJ 07070, USA
t (201) 508-3000 f (201) 935-4555 www.us.sgs.com
This certificate remains the property of SGS and shall be returned upon request
li's document is issued by the Company subject to its General Conditions of Certification Services accessible at www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitations of
liability. indemnification and jurisdictional issues established therein. The authenticity of this document may be verified at http://www.sgs.comienJOur-Company/Certified-Client
DirectorieslCertified-Client-Directories.aspx. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the
fullest extent of the law.
Page 1 of 1
SG$
ACCREDITED
MANAGEMENT SYSTEMS CERTIFICATION BODY
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIASOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
Covering the world.Protecting the Earth.
Covering the world.Protecting the Earth.
COMPANYP R O F I L E
Rev
06.1
7
Solmax is not a design professional and has not performed any design services to determine if Solmax's goods comply with any project plans or speci�ications, or with the application or use of Solmax's goods to any particular system, project, purpose, installation or speci�ication.
HEADQUARTERS2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234 or 1.800.571.3904
SOLMAX USA LLC8615 Golden Spike Ln, Houston, Texas, 77086, USA Tel.: 1.800.571.3904
ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600
SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999