Company production strategy Company production strategy Production system Production system Good...

Post on 11-Dec-2015

231 views 2 download

Tags:

Transcript of Company production strategy Company production strategy Production system Production system Good...

Company production strategyCompany production strategy Company production strategyCompany production strategy

Production systemProduction system Production systemProduction system

Good manufacturing practiceGood manufacturing practice Good manufacturing practiceGood manufacturing practice

Machinery manufacturingMachinery manufacturing Machinery manufacturingMachinery manufacturing

Oprema Intercom productionOprema Intercom production Oprema Intercom productionOprema Intercom production

Production capacityProduction capacity Production capacityProduction capacity

2

CONTENT

COMPANY PRODUCTION STRATEGY

MARKETING

PRODUCTION

TECHNICALSECTOR

DEVELOPMENT

INFORMATICSSYSTEM

GoSoft 2000L A B O R A T O R Y

3

PRODUCTION SYSTEM

4

GMP (Good Manufacturing Practice)

5

6

EQUIPMENT FOR METAL SHEET PROCESING

7

EQUIPMENT FOR METAL TUBE PROCESSING

CHARGING EQUIPMENT FOR REFRIGERANT GASES

8

9

OTHER EQUIPMENT

10

Thermodynamic laboratory consists of 3 chambers. Two of them are equipped so that ambient temperature can be held at any temperature between 0-40ºC with tolerance +/-0,5ºC. One of them is equipped so that humidity could be held between 30 – 100%. Laboratory is equipped with water line, controlled temperature (0-40ºC) which is used for thermal load simulation or as inlet water for draw simulation.

Data acquisition system is controlled by OMRON PLC C200 Series with analog and digital inputs and digital outputs. All parameters: temperatures, pressures, current, power, power consumption are analyzed by PLC and by SCAD Omron CX-Supervisor tool stored in computer. Furthermore, system has a possibility of managing with tested equipment on the base of input data and previous recorded software.

THERMODYNAMIC LABORATORY

11

Oprema Intercom PRODUCTION

PRODUCTION CAPACITY

12

• 50.000 units ( instaled capacity)

• Production capacity per product : UNITSBeer coolers and dispensers 30.000 - 35.000Postmix dispensers 2.000 - 5.000Wine coolers and dispensers 2.000 - 3.000Water coolers and dispensers 5.000 - 8.000Demo bars 1.000 – 2.000Cooling cabinets 1.500 - 2.500Towers 8.000 - 10.000Tubes 2 500 000 m

• 50.000 units ( instaled capacity)

• Production capacity per product : UNITSBeer coolers and dispensers 30.000 - 35.000Postmix dispensers 2.000 - 5.000Wine coolers and dispensers 2.000 - 3.000Water coolers and dispensers 5.000 - 8.000Demo bars 1.000 – 2.000Cooling cabinets 1.500 - 2.500Towers 8.000 - 10.000Tubes 2 500 000 m

Thank You.

13