Post on 08-Jun-2019
AUSTRALIAN GOVERNMENT
NATIONAL HEALTH ACT 1953
Determination under Schedule 1, paragraph (bj)
(HIB 10/2005)
I, LINDA JANE ADDISON, delegate of the Minister for Health and Ageing, acting under Schedule 1, paragraph (bj) of the National Health Act 1953 (the Act):
AMEND, with effect from 27 May 2005, the Determination made under Schedule 1, paragraph (bj) of the Act dated 30 June 1999 (as amended) by OMITTING Schedule 5 of that Determination and SUBSTITUTING the attached Schedule 5.
Dated this 17 day of May 2005.
Signed by
………………………………….Linda Jane AddisonAssistant SecretaryPrivate Health Insurance BranchPosition No: 01202874Delegate of the Minister for Health and Ageing
May 2005
SCHEDULE 5 – PROSTHESES AND HUMAN TISSUES
5.1 Subject to any indications on the Australian Register of Therapeutic Goods (ARTG) in relation to a prosthesis specified in Part A, this Schedule sets out the prostheses and human tissues provided to a private patient of a hospital or day hospital facility for which benefits must be paid. Clinical choice remains a matter between the doctor and the patient and is not to be influenced by the manufacturer, supplier or the registered health benefits organisation (RHBO).
5.2 In this Schedule:
“hospital” includes a day hospital facility;
“human tissues” means the items included in Part B;
“prostheses” means the items included in Part A; and
references to a manufacturer, supplier, hospital or a RHBO include any agent actingon their behalf.
Prostheses
5.3 Subject to any indications on the ARTG in relation to a prosthesis specified in Part A, the level of benefit payable in respect of a prosthesis specified in Part A is the fee or charge agreed between the RHBO and one only of the manufacturer, supplier or hospital.
Note: Other than the fees or charges permitted under clause 5.3, no additional charges can be imposed on a patient by a manufacturer, supplier, hospital or a RHBO.
5.4 Where the fee or charge is agreed between the RHBO and either the manufacturer or supplier under paragraph 5.3, then the RHBO and the manufacturer or supplier must advise all hospitals of the fee or charge agreed within two weeks of the date of the agreement.
5.5 Where the fee or charge for an item cannot be agreed between the RHBO and one of the manufacturer, supplier or hospital the relevant parties may agree to request the Department of Health and Ageing to appoint a conciliator to assist them to reach agreement on the fee or charge for the item for the purpose of paragraph 5.3. If the parties so request they shall, in equal measure, meet all of the costs incurred by the Department of Health and Ageing in arranging and facilitating this conciliation process.
5.6 If an agreement on the fee or charge for an item cannot be reached, the Minister will exercise his/her powers under paragraph (bj) of Schedule 1 to the National Health Act 1953 to determine the minimum level of benefit payable for the item in dispute.
Human tissues
5.7 The level of benefit payable in respect of a human tissue supplied by a particular facility is the amount specified in the “Amount” field of Part B.
Notes:The organisations specified in the “Facility” field of Part B must comply with any applicable State and Territory laws governing harvesting and processing of human tissue items to be eligible for the payment of private health insurance benefits.
Other than the fees or charges permitted under clause 5.7, no additional charges can be imposed on a patient by a manufacturer, supplier, hospital or a RHBO.
PART A - Prostheses List by Category, Groups and Sponsor February 2005CARDIO-THORACIC Minimum Maximum
Benefit Benefit Billing Code Product Name Description Size Level Level Notation
Annuloplasty Rings
Edwards Lifesciences Pty LtdEL028 Baxter Sterile Grafts, Implants & Carpentier-Edwards Classic Annuloplasty 24mm-40mm
Prostheses, Non-Animal Origin Ring. Composition: Titanium Alloy; Annuloplasty: Ring-Mitral Ring with Silicone Rubber; Polyester Fabric Holder; Mitral Cosgrove-Edwards Carpentier-Edwards Physio Annuloplasty Annuloplasty System Model 4600; Classic Ring. Composition: Elgiloy Bands;
Polyester Film Strips; Silicone Rubber; Polyester Cloth, Cosgrove-Edwards Annuloplasty Band. Composition: Silicone Rubber; Polyester Cloth. Carpentier-Edwards Tricuspid Ring. Composition: Titanium Alloy; Silicone Rubber;
EL049 Edwards Etlogix Annuloplasty Ring Titanium/silicon/dacron polyester 24mm/26mm/28mm/30mm/32mm/34mmdcloth/plastic template Mitral valve annular repair device designed specifically for patients with Ischemic Mitral regurgitation
Medtronic Australasia Pty LtdMC005 Medtronic Posterior Annuloplasty Band; Annuloplasty Devices - Models 610B, Models 610B & 610R 25-35mm, Models
Medtronic Duran Annuloplasty Ring; 610R & 620B, 620R Silicone / Barium 620B & 620R 23-35mm, Model 638B - Colvin - Galloway Future Band Model Sulphate, Dacron. Models 638B semi- 26-38mm638B; Duran Ancore Band 620B; Duran rigid metal alloy core, silicone coating, Ancore Ring 620R polyester knit fabric, kit includes - band,
malleable handle, template with suture markers, sizers, molded tray.
St. Jude Medical Australia Pty LtdSJ034 SJM Seguin Annuloplasty Ring Semi Rigid 24mm - 40mmSJ035 SJM Tailor Annuloplasty Ring Fully Flexible 25mm - 35mm
Tag MedicalTM001 AnnuloFlo Annuloplasty System Annuloflex Ring or AnnuloFlo Ring 26-36mm
PART A - Prostheses List by Category, Groups and Sponsor Page 1 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Angioplasty, Laser
Pacing Importers Pty LtdPI002 Excimer Laser Stent Polyester Fibre optic fibre catheter 0.457mm, 0.9mm, 1.4mm, 1.7mm and
Coronary StentsDrug Eluting Stents
Boston Scientific Pty LtdBS074 Taxus on Express2 Coronary Stent balloon expandable stent with conformal Length 8 - 32mm; Diameter 2.25 -
System Models 38001-0822 to 0840; polymer/drug matrix coating, pre-38001-1222 to 1250; 38001-1622 to mounted on high pressure monorail 1650;38001-2022 to 2050; 38001-2422 to 2450; 38001-2827 to 2850; 38001-3227
Johnson & Johnson Medical Pty LtdJJ302 CYPHER Sirolimus-Eluting Stent & Stainless steel coronary stent with Diameter 2.25 - 5.0mm, length 8-33mm
Delivery System Model CRS - 23300, Rapamycin (an immunosuppressive and 08225, 08250, 08275, 08300, 28225, antiproliferative drug) bound to the stent 28250, 28275, 28300, 33225, 33250, 33275, 33300, 13225, 13250, 13275, 18225, 18250, 18275, 18300, 23225, 23250, 23275, 23350, 23400, 08350, 08400, 28350, 28400, 33350, 33400, 13300, 13350, 13400, 18350, 18400, 23450, 23500, 28450, 28500, 33450, 33500, 08450, 13450, 18450, 18500
General Purpose Bare Metal Stents
Abbott Australasia Pty LtdAY006 Bio-Divysio Stent SV/OC/AS Balloon expandable Phosophoryl-Choline Divysio Stent SV - Diameters: 2.0, 2.25,
coated stainless-steel endovascular 2.5 Lengths: 7mm, 10mm, 15mm, coronary stent 18mm, 21mm; Divysio Stent OC & AS -
Diameters: 2.75, 3.0, 3.5, 4.0 Lengths: 8mm, 11mm, 15mm, 18mm, 22mm, 28mm
AY013 JoStent Coronary Stent Stainless Steel 9 - 26 mm x 2.5 - 4 mm
PART A - Prostheses List by Category, Groups and Sponsor Page 2 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Atrium Australia-Pacific Rim Pty LtdAC022 Flyer RX Coronary Stent System Stainless Steel Coronary Stent Dia 2-5mm, Length 6-40mm
B Braun Australia Pty LtdBB171 Coroflex Coronary Stent System Electropolished stainless steel 316L; Laser 2.5 x 8mm; 3.0 x 8mm; 3.5 x 8mm; 4.0
cut slotted tube. Product includes: x 8mm; 2.5 x 13mm; 3.0 x 13mm; 3.5 x Coronary stent mounted on delivery 13mm; 4.0 x 13mm; 2.5 x 16mm; 3.0 x
16mm; 3.5 x 16mm; 4.0 x 16mm; 2.5 x 19mm; 3.0 x 19mm; 3.5 x 19mm; 4.0 x 19mm; 2.5 x 25mm; 3.0 x 25mm; 3.5 x
BB172 Coroflex Theca Coronary Stent System Electropolished Stainless Steel 316L; Dia 2.5-4.0mm, length 8-25mmLaser cut slotted tube, coated with Polyzene-F; includes Coronary Stent mounted on delivery balloon catheter.
BB173 Coroflex Delta Coronary Stent System Electropolished Stainless Steel 316L; Dia 2.5-4.0mm, length 8-25mmLaser cut slotted tube, includes Coronary Stent mounted on delivery balloon
BB244 Coroflex Blue Cobalt Chromium Alloy L605 2-4mm diameter, 8-25mm length
Biotronik Australia Pty LtdBT040 Lekton Intracoronary stent - balloon mounted Dia 2.5-4mm, length 10-30mmBT058 Lekton Motion Coated flexible stent, Balloon mounted Diameter 2.5mm to 4mm, Length 8 - BT059 Astron Flexible coated stent, Nitinol, self- Diameter 7-12mm, Length 30-80mm
Boston Scientific Pty LtdBS069 Express 2/Liberte Coronary Stent Consists of a balloon expandable stent, Stent lengths: 8,12,16,20,24,28 & 32 mm
pre-mounted on a Maverick 2 Monorail Stent diameters: 2.25, 2.5, 2.75, 3.0, 3.5,delivery catheter. 4.0, 4.5 & 5.0 mm
PART A - Prostheses List by Category, Groups and Sponsor Page 3 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Daralan Pty LtdDA001 S-Stent SRX1 316L Stainless Steel SRX1-2510 2.5 x 8.5mm; SRX1-3010
3.0 x 8.5mm; SRX1-3510L 3.5 x 8.5mm; SRX1-4010L 4.0 x 8.5mm; SRX1-2512 2.5 x 11mm; SRX1-3012 3.0 x 11mm; SRX1-3512L 3.5 x 11mm; SRX1-4012L 4.0 x 11mm; SRX1-2515 2.5 x 14.4mm; SRX1-3015 3.0 x 14.4mm; SRX1-3515L 3.5 x 14.6mm; SRX1-4015L 4.0 x 14.6mm; SRX1-2520 2.5 x 18.7mm; SRX1-3020 3.0 x 18.7mm; SRX1-3520L 3.5 x 18.4mm; SRX1-4020L 4.0 x 18.4mm; SRX1-2525 2.5 x 24.5mm; SRX1-3025 3.0 x 24.5mm; SRX1-3525L 3.5 x 23.2mm; SRX1-4025L 4.0 x 23.2mm; SRX1-2530 2.5 x 28.9mm; SRX1-3030 3.0 x 28.9mm; SRX1-3530L 3.5 x 28.2mm;
Guidant Australia Pty LtdGU102 Stents ACS Multilink Coronary Stent; ACS 1.5mm - 8.0mm
Megalink Peripheral Stent; ACS RX Herculink Peripheral Stent. Stainless steel
GU105 Multilink Coronary Stent System Stainless Steel Length 1.5mm - 8.0mmGU127 Multilink Coronary Stent System - Frontier 316L Stainless steel stent Length 1.5 - 8.0mmGU128 Multilink Coronary Stent System - Vision Cobalt chrome stent Length 1.5 - 8.0mm
Johnson & Johnson Medical Pty LtdJJ026 BX Velocity with Hepacoat System Balloon expandable, stainless steel,
heparin coated
JJ200 BX Velocity Stent and Delivery System Stainless steel stent Diameter: 2.25-5.0 mm; Length 8 - 33 JJ239 BX Sonic Stainless steel coronary stent mounted on Dia 2.25 - 4.0mm, lengths 8 - 33mm
a balloon delivery system
Medical Vision Australia Pty LtdMF004 Vivant Z Stent Coronary stent made of alloyed medical Dia 2.5 - 4.0mm, length 9 - 28mm
grade stainless steel
Medtel Australia Pty LtdME050 Antares Coronary Stent System Stent Length: 8mm - 32mm Diameter: 2.5mm -
4.0mm
PART A - Prostheses List by Category, Groups and Sponsor Page 4 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME071 Antares Starflex Coronary System Stainless steel Bare stent lengths 8, 12, 16, 20, 24, 32mm; Expansion range 2.5 - 4.0mmStent Delivery System, stent lengths 8mm, 12mm, 16mm, 20mm, 24mm, 32mm
ME073 Lunar Starflex Coronary Stent System Niobium alloy stent coated with layer of Balloon 2.25-4.0mm, stent 8-20mmhomogenous iridiumoxide (IrOx)
Medtronic Australasia Pty LtdMC197 Medtronic AVE S660 Coronary Stents, Stainless Steel S660 Coronary Stent - Diameter (2.5mm-
S670 Coronary Stents, S7 Coronary 2.75mm), Length (9mm-24mm); S670 &Stents, BeStent2, S7 Coronary Stent - Diameter (3mm-
4mm), Length (9mm-30mm); BeStent2 - Diameter (2.5mm-4mm), Length (9mm-
MC329 Medtronic Driver, Micro Driver Coronary Cobalt Alloy Driver Stent: diameter (2.25 - 4.5mm), Stent System length (8-30mm); Micro-Driver Stent:
diameter (2.25 - 2.75mm), length (8 -
Pacing Importers Pty LtdPI003 Med-X-Flexy Stent Tubular Stent, Stainless steel 316L, Gold Dia 5 - 9mm length: 20 - 100mm
markers
Terumo Corporation AustraliaTU001 Intra Coronary Stent Stainless Steel mounted on balloon Diameter 2.0mm - 4.0mm, Length 10mm
- 30mm length
Woodstock Biomedical Pty LtdWO031 Duraflex Coronary Stent System 316L Medical Grade Stainless Steel Stent Length 8, 11, 14, 18, 21, 25mm x
Premounted on Rail Design Catheter Diameter 2.5, 2.75, 3.0, 3.5, 4.0mm
Zynergy Medical Pty LimitedZY001 Carbostent Coronary stent - includes Carbostent Dia 2.5mm x Length 9, 12, 15, 19,
Syncro & Carbostent Sirius 25mm; Dia 3.0mm x Length 9, 12, 15, 19, 25, 32mm; Dia 3.5mm x Length 9, 12, 15, 19, 25, 32mm; Diameter 4.0mm x Length 9, 12, 15, 19, 25, 32mm
Special Purpose Stents
Abbott Australasia Pty LtdAY012 JoStent Coronary Stent Graft Stainless Steel/PTFE 9 - 26 mm x 2.5 - 5 mm
PART A - Prostheses List by Category, Groups and Sponsor Page 5 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Boston Scientific Pty LtdBS067 Symbiot Covered Stent System A self-expending nitinol stent encased Stent lengths: 20, 31 & 45 mm Stent
within an ePTFE covering, premounted diameters: 4.0 & 5.0 mmon a Monorail delivery catheter
CRT PacemakersGeneration 1
Guidant Australia Pty LtdGU087 Contak TR Model 1241 Pacemaker Titanium 3.2mm/IS-1GU143 Contak Renewal TR CRT -P Model Implantable cardiac pacemaker 45x54x8.5mm, 14cc, 26gm
H120, Model H125
Medtronic Australasia Pty LtdMC006 InSync model 8040 Stimulator Titanium 14.4cc
St. Jude Medical Australia Pty LtdSJ040 Frontier 3x2 Model 5510 Biventricular Stimulation Device with AF Height 48mm, Length 52mm, Depth 6mm
suppression
Generation 2
Biotronik Australia Pty LtdBT056 Stratos LV Multiprogrammable, Biventricular, DDDRV One size only
Guidant Australia Pty LtdGU142 Contak Renewal TR2 CRT - P Model Implantable Cardiac pacemaker 45x54x8.5mm, 14cc, 26gm
H140, Model H145
Medtronic Australasia Pty LtdMC226 Medtronic Insync III Triple Chamber Titanium One size only
Pacemaker Model 8042
Dual Chamber ICDsGeneration 1
Biotronik Australia Pty LtdBT042 Tachos Atx Implantable Cardioverter Defibrillator - One Size Only
Atrial Therapy
PART A - Prostheses List by Category, Groups and Sponsor Page 6 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Generation 2
Biotronik Australia Pty LtdBT045 Belos DR, Implantable Cardioverter Dual Chamber ICD, Rate Responsive One Size Only
Defibrillator
Medtronic Australasia Pty LtdMC202 Medtronic Gem III DR Model 7275 Titanium One size only, 39.5cc
Implantable Cardioverter Defibrillator
Progressive MedicalPG004 Alto II DR Dual Chamber Implantable One size only
Cardioverter Defibrillator
St. Jude Medical Australia Pty LtdSJ009 Photon Micro DR Model V-232 37cc
Defibrillators/Cardioverters
Generation 3
Biotronik Australia Pty LtdBT053 Lexos DR Dual chamber ICD, rate responsive One size only.
Guidant Australia Pty LtdGU111 Ventak Prizm II DR Model 1861, titanium, dual chamber, One size only
adaptive rate
GU132 Vitality DR Model 1871 This device acts to defibrillate the heart Model 1871 Vitality DR Dual Chamber chambers when the patient enters into an Rate Responsive Pacemaker/Defibrillatorarrhythmia or uses shocks or anti tachy pacing to revert Ventricular Tachycardia (VT) or Ventricular Fibrillation (VF). While also acting as a dual chamber
GU149 Vitality 2 DR - Model T165 Implantable Cardiac Defibrillator 30cc ; 82gGU150 Vitality 2 EL Dr - Model T167 Implantable cardiac Defibrillator 35cc ; 90g
Medtronic Australasia Pty LtdMC245 Marquis DR Model 7274 Implantable Titanium 36cc
Cardioverter Defibrillator
MC318 Maximo DR Model 7278 Titanium One size only 38.9cc
PART A - Prostheses List by Category, Groups and Sponsor Page 7 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
St. Jude Medical Australia Pty LtdSJ049 Epic Plus DR Model V-236 Implantable Dual Chamber sensing, bradycardia 33cc
Cardioverter Defibrillator pacing with atrial fibrillation suppression
SJ070 Epic + DR Model V-233 ICD Dual Chamber Implantable Cardio-verter 33cc 70gDefibrillator
SJ071 Epic + DR Model V-239 ICD Dual chamber implantable cardio-verter 33cc 70g $0.00defibrillator
Dual Chamber ICDs with CRTGeneration 1
Guidant Australia Pty LtdGU119 Contak Renewal Model H135 Composition - titanium, indicated for One size only
patients with symptomatic hear failure. Provides cardiac resynchronisation therapy by providing electrical stimulation to synchronize left and right ventricular contractions. These devices also provide defibrillation back up.
Medtronic Australasia Pty LtdMC252 Medtronic InSync Marquis Implantable Titanium Volume 38cc
Cardioverter Defibrillator Model 7277
Generation 2
Guidant Australia Pty LtdGU134 Contak Renewal 2 This device acts to defibrillate the heart One Size Only
chambers when the patient enters into an arrhythmia or uses shocks or anti tachy pacing to revert Ventricular Tachycardia (VT) or Ventricular Fibrillation (VF). While also acting as a dual or single
GU147 Contak Renewal 4 CRT-D Model H190, Implantable dual-chamber defibrillator One size onlyModel H195
Medtronic Australasia Pty LtdMC306 InSync III Marquis Model 7279 Titanium One size only - Volume 38ccMC325 InSync Sentry Model 7298 Defibrillator, Titanium 40cc
PART A - Prostheses List by Category, Groups and Sponsor Page 8 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
St. Jude Medical Australia Pty LtdSJ062 Epic HF Model V-339 Implantable Cardioverter/defibrillator with dual One size only
Cardiac Defibrillator chamber (atrial and RV) sensing and bradycardia pacing with ventricular
SJ067 Epic + HF Model V-350 ICD Epic + HF V-350 ICD is a cardioverter 36cc / 73gdefibrillator with dual chamber (atrial and RV) sensing and bradycardia pacing with ventricular resynchronisation therapy.
Dual Chamber PacemakersGeneration 1
Biotronik Australia Pty LtdBT026 Philos D Model 122447 Implantable Multiprogrammable, ventricula, rate One size only
Pacemaker responsive modes, DDDC
BT031 AXIOS D Implantable Cardiac Pulse Multiprogrammable, DDD One size onlyGenerator Cat No. 338 843
Guidant Australia Pty LtdGU079 Pulsar Model VDD 870 Titanium 3.2mm/IS-1
Medtronic Australasia Pty LtdMC033 Medtronic Kappa 700 Pacemaker Model Titanium 10.9cc, 11.1cc
KVDD700/701
MC235 Vitatron Vita 2 VDD Model 630, Titanium, polyurethane One size onlyImplantable Cardiac Pacemaker
MC243 Medtronic Kappa KVDD 900 Model Cardiac Pacemaker, Titanium 11.1ccKVDD 901
MC290 Vitatron C50 D Pacemaker Titanium, polyurethane one size onlyMC319 EnPulse VDD; Model E2VDD01 EnPulse VDD pacemaker with IS1 One size only
connector. Titanium silicone
MC320 EnPulse D Series: Model E2D01, Model EnPulse DDD-Pacemakers - with IS1 One size onlyE2D03 connector; with 3.2mm low profile
connector. Titanium and silicone
St. Jude Medical Australia Pty LtdSJ050 Verity ADx Model XL DC 5256 Dual - Dual Chamber multi-programmable rate- 11cc, 23.5g
Chamber pacemaker adaptive pacing devices with extended longevity
PART A - Prostheses List by Category, Groups and Sponsor Page 9 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SJ061 Identity Adx Model XL DC 5286 Dual Identity ADx Model XL DC Model 5286 11cc, 23.5gChamber Pacemaker is an implantable, multi-programmable
rate-adaptive pacing device with AF
Generation 2
Biotronik Australia Pty LtdBT027 Philos SLR Model 122456 Implantable Single pass, multiprogrammable, rate One size only
Pacemaker responsive, VDDR
BT039 AXIOS SLR Implantable Cardiac Pulse Multiprogrammable, rate responsive, One size onlyGenerator Cat No 338 849
Medtronic Australasia Pty LtdMC212 Medtronic Vitatron Clarity VDDR Model Titanium, polyurethane One size only
St. Jude Medical Australia Pty LtdSJ054 Identity ADx Model VDR 5480 Single Chamber multi-programmable rate- 8cc, 18g
implantable pacemaker adaptive pacing device with extended longevity
SJ057 Verity ADx Model XL VDR 5456 Single Chamber multi-programmable rate- 11cc, 23.5gimplantable pacemaker adaptive pacing device with extended
longevity
Generation 3
Biotronik Australia Pty LtdBT024 Philos DR Model 122450 Implantable Multiprogrammable, rate responsive, One size only
Pacemaker
BT029 Philos DR-A Model 122600 Implantable Multiprogrammable, rate responsive, 5mm ports, One size onlyPacemaker
BT032 AXIOS DR Implantable Cardiac Pulse Multiprogrammable, rate responsive, One size onlyGenerator Cat No. 338 845
BT047 Protos DR/CLS Dual chamber, rate responsive, closed One size only.loop system.
BT060 Philos II DR Multiprogrammable, rate responsive, One size only
Guidant Australia Pty LtdGU045 Pulsar Max II Pacemaker DDDR Model 1280GU120 Insignia Plus DR Model 1297, Insignia Dual Chamber Rate Responsive One size only
Plus DR Model 1298 Permanent Pacemaker
PART A - Prostheses List by Category, Groups and Sponsor Page 10 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GU121 Insignia Entra DR Models Dual Chamber Rate Responsive One size onlyPermanent Pacemaker
GU140 Insignia Ultra DR Model 1291 Implantable Cardiac Pacemaker One size onlyGU141 Insignia Ultra DR Model 1290 Implantable Cardiac Pacemaker One size only
Medtronic Australasia Pty LtdMC210 Medtronic Vitatron Clarity DDDR Model Titanium, polyurethane One size onlyMC222 Medtronic Vitatron Diamond 3 DDDR Titanium, polyurethane One size only
Model 840 Pacemaker
MC230 Vitatron Selection Model 9000 Pacemaker Titanium, polyurethane One size onlyMC240 Vitatron Vita 2 DDDR Model 830, Titanium, Polyurethane One size only
Implantable Cardiac Pacemaker
MC289 Vitatron C60 DR Pacemaker Titanium, polyurethane one size onlyMC333 Medtronic Kappa Pacemaker Model KDR Cardiac Pacemaker, Titanium 12.1cc, 11.1cc, 13.1cc
901, KDR921 and KDR931
Progressive MedicalPG002 Talent II DR Pacemaker Model 233 Dula Chamber Pacemaker. 99% titanium 57.5 x 37.2 x 8mmPG005 Symphony DR 2550 Active Implantable pacemaker 1 size only
St. Jude Medical Australia Pty LtdSJ026 St Jude Medical Integrity AFX DR5346 Dual chamber, rate responsive pacemaker Volume 11cc, weight 23.5gm
Pacemaker, Cardiac, Implantable
SJ028 Integrity Micro DR 5336 Pacemaker Dual Chamber Rate Responsive Volume 8cc, Weight 18gmSJ031 Identity XL DR 5376 Dual Chamber Rate Responsive Volume 11cc, Weight 23.5gmSJ032 Identity DR 5370 Dual Chamber Rate Responsive Volume 8cc, Weight 18gmSJ051 Verity Adx Implantable Pacemaker, Dual - Chamber, multi-programmable, 45x52x6mm,11cc, 23g, 5mm or 6mm M/S
Models XL DR 5356 and XL DR 5357M/S rate-responsive pacemaker withAF
SJ056 Integrity ADx Model DR 5360 and XL Dual-Chamber, multi-programmable, rate- Model DR 5360 - 8cc, 18g, Model XL DR 5366 responsive pacemaker with AF DR 5366 - 11cc, 23.5g
SJ059 Identity ADx Models DR 5380 and XL Dual-Chamber, multi-programmable, rate- ADx DR 5380: 43x44x6mm, 18g and 8ccDR 5386 adaptive pacing devices with AF
ADx XL DR 5386: 44x52x6mm, 23.5g
PART A - Prostheses List by Category, Groups and Sponsor Page 11 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Generation 4
Medtronic Australasia Pty LtdMC322 EnPulse DR Series: Model E2DR01, EnPulse DDDR Pacemakers - with IS1 one size only
Model E2DR03, Model E2DR06, Model connector and normal battery size; with E2DR21, Model E2DR31, Model E2DR33 3.2mm low profile connector and normal
battery size; with 5/6 mm connector and normal battery size; with IS1 connector and small battery size; with IS1 connector and large battery size; with 3.2mm low profile connector and large battery size. Titanium and silicone.
Embolization Prostheses, Intravascular
William A Cook Aust Pty LtdWC076 Flipper-Patient Ducts Arteriosus- Detachable Coil for PDA Closure Coil Diameter 3,5,6.5 & 8 mm Number
Occluding System of Loops (3,4,5)
Filters, Vena Cava
B Braun Australia Pty LtdBB105 Celsa Vena Cava Filter System Phynox/ combination of various metals One size, expands to Max length
inc. Nickel,Copper, Molubden,Steel 38mm/Max diameter 30mm
BB106 Celsa Temporary Vena Cava System Phynox/ combination of various metals One size, expands to Max length inc. Nickel,Copper, Molubden,Steel 38mm/Max diameter 30mm
Grafts
Woodstock Biomedical Pty LtdWO033 Endofit Endoluminal Stent Graft Tapered Thoracic Endoluminal Stent Max Dia. 42mm, Min Dia. 14mm, Length
Graft with external fixation 12-26cm
WO034 Endofit Endoluminal Stent Graft Occluder Endoluminal Stent Graft Max Dia. 42mm, Min Dia. 14mm, Length 2 or 3.5cm
PART A - Prostheses List by Category, Groups and Sponsor Page 12 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WO035 Endofit Endoluminal Stent Graft Extender Endoluminal Stent Graft, Max Dia. 42mm, Min Dia. 14mm, Lengthabdominal and thoracic, Preloaded 4-12cm
WO036 Endofit Endoluminal Stent Graft Extender Endoluminal Stent Graft, Max Dia. 42mm, Min Dia. 14mm, Lengthabdominal and thoracic, Cartridge 4-12cm
WO037 Endofit Endoluminal Stent Graft Endoluiminal Cuff Stent Graft with Max Dia. 42mm, Min Dia. 24mm, Lengthexternal fixation, abdominal and thoracic, 5 or 7cm
WO038 Endofit Endoluminal Stent Graft Endoluminal Cuff Stent Graft with Max Dia. 42mm, Min Dia. 24mm, Lengthexternal fixation, abdominal and thoracic, 5 or 7cm
WO039 Endofit Endoluminal Stent Graft Aortomonoiliac Endoluminal Stent Graft Max Proximal Dia. 38mm, Min Distal with external fixation Dia. 14mm, Length 14 - 26cm
WO040 Jotech Flowline Bipore Vascular Graft Thin Wall with Spiral Reinforcement 40 & 50cmWO041 Jotech Flowline Bipore Vascular Graft Thin Wall 40 & 50cmWO042 Jotech Flowline Bipore Vascular Graft Standard Wall with Spiral Reinforcement 70 & 80cmWO043 Jotech Flowline Bipore Vascular Graft Standard Wall 80cmWO044 Jotech Flow Weave Vascular Graft Flow Weave 30cmWO045 Jotech Flow Weave Vascular Graft Flow Weave 60cmWO046 Jotech Flow Weave Vascular Graft Flow Weave BioSeal 15cmWO047 Jotech Flow Weave Vascular Graft Flow Weave BioSeal 30cmWO048 Jotech Flow Weave Vascular Graft Flow Weave BioSeal 60cm
Grafts, Dura, Biological
Edwards Lifesciences Pty LtdEL033 Baxter Augmentation / Substitution Edwards Pericardial Patch. Bovine 10cm x 16cm
Material, Human or Animal Origin, Sterile Pericardium.Pericardial Patch.
Grafts, Vascular, Synthetic
Bard Australia Pty LtdBA089 Impra PTFE Vascular Grafts ePTFE Cardiovascular Patch 0.4mm Oval 20 x 90mmBA090 Impra PTFE Vascular Grafts ePTFE Cardiovascular, Patch 0.6mm, 100 x 150mm
PART A - Prostheses List by Category, Groups and Sponsor Page 13 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA091 Impra PTFE Vascular Grafts ePTFE Cardiovascular, Patch 0.6mm, 50 x 75mmRectangular
BA092 Impra PTFE Vascular Grafts ePTFE Cardiovascular, Patch 0.6mm, 50 x 150mmRectangular
BA093 Impra PTFE Vascular Grafts ePTFE Cardiovascular, Patch 0.6mm, 30 x 30mm, 10 x 90mm, 30 x 60mmRectangular, Patch 0.4 Oval, Rectangular
BA095 Impra PTFE Vascular Grafts ePTFE Cardiovascular, Patch 0.6mm, 25 x 150mmRectangular
Woodstock Biomedical Pty LtdWO049 Jotec Flowline Bipore Heparin ePTFE ePTFE Vascular Graft with microporous All sizes up to 50cm in length
Vascular Graft Straight, Standard Wall structure. Standard Wall with Heparin
WO050 Jotec Flowline Bipore Heparin ePTFE ePTFE Vascular Graft with microporous All sizes at over 50cm in lengthVascular Graft Straight, Standard Wall structure. Standard Wall with Heparin
WO051 Jotec Flowline Bipore Heparin ePTFE ePTFE Vascular Graft with microporous All sizes up to 50cm LengthVascular Graft Straight, Standard Wall structure. Standard Wall with Heparin andwith Reinforcement Reinforcement
WO052 Jotec Flowline Bipore Heparin ePTFE ePTFE Vascular Graft with microporous All sizes at over 50cm in LengthVascular Graft Straight, Standard Wall structure. Standard Wall with Heparin andwith Reinforcement Reinforcement
WO053 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes up to 50cm in LengthGraft, Straight, Thin Wall structure. Thin Wall
WO054 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes at over 50cm in lengthGraft, Straight, Thin Wall structure. Thin Wall
WO055 Jotec Flow Nit Bioseal Polyester Vascular Flow Nit Bioseal Straight grafts are For all diameters in 30cm lengths Grafts, Straight Grafts texturised exterior yarns for superior
tissue incorporation and healing characteristics, with the new Bioseal impregnation to make the grafts blood
WO056 Jotec Flow Nit Bioseal Polyester Vascular Flow Nit Bioseal Straight grafts are For all diameters in 15cm lengths Grafts, Straight Grafts texturised exterior yarns for superior
tissue incorporation and healing characteristics, with the new Bioseal impregnation to make the grafts blood
WO057 Jotec Flow Nit Bioseal Polyester Vascular Flow Nit Bioseal Straight grafts are For all diameters in 60 and 100cm lengths Grafts, Straight Grafts texturised exterior yarns for superior
tissue incorporation and healing characteristics, with the new Bioseal impregnation to make the grafts blood
PART A - Prostheses List by Category, Groups and Sponsor Page 14 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WO058 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes up to 50cm in LengthGraft, Straight, Standard Wall With structure, Straight, Standard Wall with
Reinforcement
WO059 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes at over 50cm in LengthGraft, Straight, Standard Wall With structure, Straight, Standard Wall with
Reinforcement
WO060 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes up to 50cm in LengthGraft, Straight, Thin Wall with structure. Thin Wall with spiral
WO061 Jotec Flowline Bipore ePTFE Vascular ePTFE Vascular Graft with microporous All sizes at over 50cm in LengthGraft, Straight, Thin Wall with structure. Thin Wall with spiral
WO062 Jotec Flow Nit Bioseal Polyester Vascular Flow Nit Bioseal Bifurcated grafts are 45 cm length, 12x6mm, 14x7mm, Grafts, Bifurcated Grafts texturised exterior yarns for superior 16x8mm, 18x9mm, 20x10mm,
tissue incorporation and healing characteristics, with the new Bioseal impregnation to make the grafts blood
ICD LeadsGroup 2 - Subcutaneous Leads
Medtronic Australasia Pty LtdMC026 Medtronic Transvene SVC Lead Model Model 6937-35, Model 6937-52, Model 35 - 110cm x 660mm Also grouped in ICD
6937-58, Model 6937-110; Silicone; Lead Group 1
Group 3 - Transvenous/Non steroid/Active Leads
Biotronik Australia Pty LtdBT048 Kentrox RV-S ICD lead, right ventricle, screw-in. One size only.BT049 Kentrox SL-S ICD Lead, Singel lead, Screw-in. Tip to second shock coil 16 cms or 18
Group 4 - Transvenous/Non steroid/Passive Leads
Biotronik Australia Pty LtdBT014 Kainox RV 75 Implantable Defibrillator endocardial 75 cms 100,18 cms 100,16 cms 100,13
shock lead with sensing and pacing. SL cms 75,18 cms100/18, SL 100/16, SL 100/13
BT050 KAINOX A+ ICD Lead, Single Pass. Atrial ring spacing 15, 17cms.BT051 KENTROX RV ICD Lead, right ventricle. 65 or 75 cms
PART A - Prostheses List by Category, Groups and Sponsor Page 15 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BT057 Kentrox SL ICD Lead, Single Lead 65, 75 or 100cm length. Tip to second shock coil 16cm or 18cm.
Group 5 - Transvenous/Steroid/Passive Leads
Guidant Australia Pty LtdGU112 Endotak Reliance S Lead Model 0127 & Model 0128, defibrillation 59cm, 64cm
lead, 9fr introducer (silicone coated), steroid eluting, high impedence
GU115 Endotak Reliance Lead Model 0147, Model 0148 & Model 0149, 59cm, 64cm, 90cmdefibrillation lead, 9fr introducer (silicone coated), steroid eluting, high impedence
Medtronic Australasia Pty LtdMC002 Medtronic Sprint Quattro Lead Model Silicone and polyurethane 65-100cm
6944RV/SVC 65cm; Model 6944RV/SVC 75cm; or Model 6944RV/SVC 100cm; Medtronic Sprint Quattro Lead Model 6944RV/SVC 58cm
MC018 Medtronic Sprint Lead Model 6942RV/SVC Model 6942-65, Model 6942-75, Model 65 - 100cm Also grouped in ICD 6942-100; Silicone Lead Group 6
MC025 Medtronic Sprint Lead Model 6932RV Model 6932-65, Model 6932-75, Model 65 - 100cm Also grouped in ICD 6932-100; Silicone Lead Group 6
St. Jude Medical Australia Pty LtdSJ016 Riata Transvenous Tachyarrhythmia Lead Quadripolar, dual-coil, steroid eluting, One size only Also grouped in ICD
Model 1580, Model 1581, Model 1570, active fixation tachyarrhythmia leads Lead Group 6Model 1571
Group 6 - Transvenous/ Steroid/Active Leads
Guidant Australia Pty LtdGU118 Endotak Endurance EZ Leads Model Defibrillation lead, steroid eluting, 64, 70, 100cm
0154, Model 0155, Model 0156 trilumen lead body contains one conductor for pacing/sensing and two conductors for defibrillation. The helix is composed of platinum iridium.
GU145 Endotak Reliance G Lead Model 0164, Implantable defibrillator/pacemaker lead Lead Lengths: 59 - 90cmModel 0165, Model 0166, Model 0167
GU146 Endotak Reliance SG Lead Model 0160, Implantable defibrillator/pacemaker lead Lead Lengths: 59 - 90cmModel 0161, Model 0162, Model 0163
PART A - Prostheses List by Category, Groups and Sponsor Page 16 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Australasia Pty LtdMC208 Medtronic Sprint Quattro Secure Lead Leads, Defibrillator, Implantable, Silicone, 58-100cm
Model 6947 58cm; Model 6947 65cm; polyurethane, platinized tantalum coils, Model 6947 75cm; Model 6947 100cm steroid eluting tip
MC331 Medtronic Sprint Lead Model 6943 Model 6943-58, Model 6943-65, Model 58 - 100cm6943-75, Model 6943-100; Silicone
MC341 Medtronic Sprint Lead Model 6945 Model 6945-58, Model 6945-65; Silicone, 58 - 100cm Model 6945-75, Model 6945-100; Silicone
Leads, Implantable Defibrillator
Guidant Australia Pty LtdGU135 Perimeter CS Defibrillation Lead - Model The Perimeter CS Lead is a flexible coil Model 0202 - 59cm; Model 0203 - 64cm;
0202, Model 0203 & Model 0204 lead designed to be placed in the coronary Model 0204 - 80cm sinus and connected to an implantable defibrillator and delivers energy to the
Leads, Pacemaker, Implantable Endocardial
Biotronik Australia Pty LtdBT063 Selox SR Lead, pacemaker, implantable, 45, 53, 60cm length
Leads, Pacemaker, Implantable Myocardial
Medtronic Australasia Pty LtdMC011 Capsure EPI steroid eluting bipolar Silicone 25 - 60cm
epicardial lead Model 4968 - ventricle
Limited Functionality ICDsGeneration 2
Biotronik Australia Pty LtdBT052 Cardiac Airbag Single chamber ICD rate responsive One size only.
PART A - Prostheses List by Category, Groups and Sponsor Page 17 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mesh, Polymeric
W L Gore & AssociatesGT128 Helex Septal Occluder ePTFE 15-35mm
Occluders
Medtel Australia Pty LtdME068 Amplatzer PFO Occluder Nitinol Wire Mesh 25mm & 35mm
Occluders, Vascular
Medtel Australia Pty LtdME065 Amplatzer Duct Occluder Nitinol Wire Mesh 5 - 24mmME066 Amplatzer Septal Occluder Nitinol Wire Mesh 4mm - 40mmME067 Amplatzer Muscular VSD Occluder Nitinol Wire Mesh 4 - 24mmME074 Amplatzer Membranous VSD Occluder Nitinol wire mesh, double disc occluder 4-24mm, Length 7-10mm
and delivery system
Pacemaker Lead Adapters, Implantable
Guidant Australia Pty LtdGU129 LV-1 Lead Adaptor to IS-1 Connects Left ventricular leads to IS-1 One size only
ports in pacemakers and defibrillators to replace abnormal cardiac excitation
GU130 Y Adaptor Connects multiple defibrillator electrodes One size onlyto a common port, enabling the use of shocks to revert Ventricular Tachycardia and normal cardiac function to return
PART A - Prostheses List by Category, Groups and Sponsor Page 18 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Australasia Pty LtdMC035 Medtronic lead Extender Kit Model: Silicone 14 - 50cm
6984M, 6981M, 6985M, 5866-24M, 5866-38M, 5866-40M, 6986M, 5866-37M; Bipolar Lead Adaptor Kit Model 2872
MC036 Medtronic Lead End Cap Kit Model: Silicone or Polyurethane; Plug to Seal IS- 10 - 25mm, IS-1 Pin Plug - One Size only5867-3M; Medtronic Adaptor Kit Line 1 connector in a pacemaker or 5866-23; Connector Sleeve 5866-45; defibrillator, SiliconeMetronic lead sleeve kit model: 5866-46; Medtronic Pinplug kit. Model 6719, IS-1
MC246 DF-I Y-Adaptor/Extender Model 6726 Silicone Lengths 25cm, 37cm25cm & 37cm
Pacemaker leadsGroup 10 - Transvenous, Bi-Polar, Active, Non-Steroid, Right Ventricular/Atrial
Biotronik Australia Pty LtdBT041 Elox Ex Leads - EX 53-BP; EX 45-BP; Endocardial Active Fixation Length 53, 45, 60cm
EX 60-BP
Group 11 - Transvenous, Bi-Polar, Passive, Steroid, Left Ventricular
Guidant Australia Pty LtdGU138 Easytrak 2, Model 4514,4515, 4516, The Easytrak 2 lead is a dual electrode
4517, 4518, 4519, 4520 version of the Easytrak lead. The Easytrak 2 lead is a coronary sinus lead, steroid eluting, dual electrode, pace/sense lead. The lead provides chronic pacing and sensing of the left ventricle by placement in the coronary venous
GU153 Easytrak 2 Is-1 Lead - Models 4542, Implantable left ventricular lead 80 to 100cm4543 & 4544
GU156 Easytrak 3 Lead - Models 4521, 4522, Implantable left ventricular pacemaker lead 80 to 100cm4523, 4524, 4525, 4526 and 4527
PART A - Prostheses List by Category, Groups and Sponsor Page 19 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 2 - Non-transvenous, Uni-Polar, Steroid
Medtronic Australasia Pty LtdMC053 Capsure EPI steroid eluting unipolar Silicone 25 - 50cm
epicardial lead Model 4965 ventricle
Group 3 - Non-Transvenous, Uni-Polar, Non-Steroid
Guidant Australia Pty LtdGU037 Myocardial Pacing Lead Model 4312 and 4316 54cm and 35cm
Medtronic Australasia Pty LtdMC009 Medtronic Epicardial Pacing Leads IS-1 Silicone 35 - 53cm
Model 5071
Group 4 - Transvenous, Uni-Polar, Passive, Steroid, Right Ventricular/Atrial
Medtronic Australasia Pty LtdMC254 CapSure Sense pacemaker lead Models Titanium Nitride CapSure Sense Lead Model 4073 - 30cm Also grouped in
4073, 4074 & 4574 to 85cm; CapSure Sense Lead Model Pacemaker Lead Group 84074 - 30cm to 85cm; CapSure Sense Lead Model 4574 - 30cm to 53cm
Progressive MedicalPG003 Swift 4040 1CT pacemaker lead length 58 cm - 69 cm
Group 5 - Transvenous, Uni-Polar, Passive, Non- Steroid, Left Ventricular
Biotronik Australia Pty LtdBT061 Corox OTW Coronary Sinus Lead for Left Ventricular 75 or 85cm
Pacing
Medtronic Australasia Pty LtdMC037 Medtronic Attain Cardiac Vein Pacing Polyurethane; 4 FR Polyurethane, 5 FR 58 - 75cm: 85cm/75cm/110cm or 75-
Lead Model 2187; Medtronic Coronary Electrode Tip, Kit Includes: Stylet x 3, 110cm; 75cm/85cmSinus Pacing Lead Model 2188; Valve lifter, Attain Lead & Anchoring Medtronic Attain SD Model 4189; Sleeve; 4 FR Polyurethane Body, 6.1FR Medtronic Attain Side-Wire Model 4191
St. Jude Medical Australia Pty LtdSJ033 Aescula LV Model 1055K Left Ventricular Pacing Lead 75cm
PART A - Prostheses List by Category, Groups and Sponsor Page 20 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 6 - Transvenous, Uni-Polar, Passive, Steroid, Left Ventricular
Guidant Australia Pty LtdGU056 Easytrak Lead Model 4510, Model 4511, Model 4512 65cm, 72cm, 80cm
Transvenous Coronary Sinus Lead
GU152 Easytrak IS-1 Lead, Models 4535 to 4538 Implantable left ventricular lead 80 - 90cm
Medtronic Australasia Pty LtdMC225 Attain Over the Wire Model 4193 Titanium, polyurethane 78-88cm
Group 7 - Transvenous, Bi-Polar, Passive, Non-Steroid, Right Ventricular/Atrial
Biotronik Australia Pty LtdBT007 Polyrox Leads - PX53-UP, PX60-UP, Dual standard leads 53 cm Ventricular, 60 cm Ventricular, 53
PX53-BP, PX60-BP, PX53-JUP, PX45- cm Ventricular, 60 cm Ventricular, 53 cmJBP, PX53-JBP, PX53/15-BP, PX60/15- Atrial, 45cm Atrial, 53cm Atrial,
53/1.5cm Vent, 60/1.5cm Vent
BT010 Polyrox Leads - PX53-UP, PX60-UP, Standard unipolar or biopolar lead 53 cm Ventricular, 60 cm Ventricular, 53 PX53-BP, PX60-BP, PX53-JUP, PX45- cm Ventricular, 60 cm Ventricular, 53 cmJBP, PX53-JBP, PX53/15-BP,PX60/15-BP Atrial, 45cm Atrial, 53cm Atrial,
53/1.5cm Vent, 60/1.5cm Vent
BT018 Merox Mex 53 JBP Pacemaker Lead High Performance Lead, Model 124884, 53cm Atrialone only
BT019 Merox Mex 60/15 BP Pacemaker Lead High Performance Lead, Model 124962, 60cm Ventricularone only
BT020 Merox Mex 53 JBP and Merox Mex High Performance Lead, Model 124884 53cm Atrial and 60cm Ventricular60/15 BP Pacemaker Leads and Model 124962, (used together)
St. Jude Medical Australia Pty LtdSJ013 Transvenous Superior Vena Cava Lead TVL lead system models SV01, SV02, SV01- 100cm; SV02 - 45cm; SV03 - 55cm
Model SV01, Transvenous Superior Vena SV03 transvenous leads Cava Lead Model SV02, Transvenous Superior Vena Cava Lead Model SV03
Group 8 - Transvenous, Bi-Polar, Passive, Steroid, Right Ventricular/Atrial
Guidant Australia Pty LtdGU002 Guidant Aust Selute Atrial J Lead Model 4293, Model 4294
PART A - Prostheses List by Category, Groups and Sponsor Page 21 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GU009 Fineline II Sterox IROX Lead Model 4458, Model 4459 52cm, 58cmGU011 Fineline II Sterox IROX Lead Model 4456, Model 4457 52cm, 58cmGU012 Fineline II Sterox IROX Lead Model 4479, Model 4480 45cm, 52cmGU023 Guidant Aust Selute Picotip Steroid Model 4033, Model 4034, Model 4035, 45cm , 52cm, 59cm
Eluting Bipolar Lead Model 4063, Model 4064
GU082 Selute Lead Model 4285 Silicone 45, 52, 59cm
Medtronic Australasia Pty LtdMC010 Medtronic Capsure SP Novus Model Silicone Polyurethane 45 -110cm
5092; Capsure SP Novus Lead Model 5592; Medtronic Capsure Model 4023 Lead; Medtronic Capsure Model 4024 Lead (med.dexamethasone) Medtronic Capsure Model 4523(MED) Medtronic Capsure Model 4524 Lead; Medtronic Capsure Model 5023M Lead; Medtronic Model 5024M Capsure Lead; Medtronic Model 5024M Capsure Lead; Medtronic Capsure Model 5524M SP Bipolar Lead
MC216 Vitatron Excellence PS+Model IMK 49B Pacemaker Leads, Titanium, Polyurethane 52-65cmMC217 Vitatron Excellence SS+Model IML 49B Pacemaker Leads, Titanium, Polyurethane 52-65cmMC218 Vitatron Excellence PS+Model IMK 49JB Pacemaker Leads, Titanium, Polyurethane 45-53cmMC219 Vitatron Excellence SS+Model IML 49JB Pacemaker Leads, Titanium, Polyurethane 45-53cmMC229 Medtronic Capsure SP Novus Model Silicone, platinum 30-100cm
5594 Lead 30cm
MC231 Vitatron Crystalline Lead Model ICL08JB Titanium, polyurethane 30-53cm LengthsLeads, Pacemaker 30cm, 45cm, 53cm
MC232 Vitatron Crystalline Lead Model ICL08 Titanium, polyurethane 52-65cm LengthsLeads, Pacemaker 52cm, 58cm, 65cm
MC233 Vitatron Crystalline Lead Model ICL08B Titanium, polyurethane 52-65cm LengthsLeads, Pacemaker 35cm, 45cm, 52cm, 58cm, 65cm
MC336 Medtronic Capsure Z Novus Model 5054 Silicone; Contents: 1 x lead with 45-58cmPacing Lead anchoring sleeve, stylet & guide, 1 x vein
lifter, 2 x fixation tools, extra stylets
PART A - Prostheses List by Category, Groups and Sponsor Page 22 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC337 Medtronic Capsure Z Novus Model 5554 Silicone; Contents: 1 x lead with 45-58cmPacing Lead anchoring sleeve, stylet & guide, 1 x vein
lifter, 2 x fixation tools, extra stylets
St. Jude Medical Australia Pty LtdSJ024 PASSIVE PLUS DX 1342T, 1343K, Single, passive fixation, steroid eluting, 46-58cm
1345K, 1346T low polarisation lead; Models: Bipolar Atrial Lead, IS-1 Unipolar Atrial Lead, IS-1 Unipolar Ventricular Lead, IS-1 or Bipolar Ventricular Lead, IS-1
Group 9 - Transvenous, Bi-Polar, Active, Steroid, Right Ventricular/Atrial
Guidant Australia Pty LtdGU013 Fineline II EZ Sterox IROX Lead Model 4472, Model 4473 & Model 4474 45cm, 52cm, 58cmGU016 Fineline II EZ Sterox IROX Lead Model 4469, Model 4470 & Model 4471 45cm, 52cm, 58cmGU031 Sweet Picotip RX Lead Model 4050, Model 4051, Model 4052, 45cm, 52cm, 59cm, 45cm & 59cm
Model 4053, Model 4054 & Model 4055
GU122 Flextend Lead Models 4086, 4087 & Bipolar, steroid eluting, transvenous 45,52,59cmsilicon pace/sense leads with an extendable/retractable active fixation for implantation into the atrium or ventricle
Medtronic Australasia Pty LtdMC008 Medtronic Capsurefix Model 6940, Silicone Polyurethane 30 - 85cm Also grouped in
Pacing Lead; Medtronic Tined IS-1 Pacemaker Lead Group 8Model 4557M; Medtronic Capsurefix Model 4067/8/4568 Pacing Leads; Medtronic Capsurefix Model 5067 Pacing Leads; Medtronic Capsurefix Model 5068 Pacing Leads; Medtronic Capsurefix Model 5568 Pacing Leads; Capsure SP Novus Pacing Lead Model 4092; Capsure SP Novus Pacing Lead Model 4592
MC221 Vitatron Crystalline Actfix Model ICF09 Pacemaker Leads, Titanium, Polyurethane 52-65cmPacemaker
MC338 Medtronic Capsurefix Novus Model 5076 Silicone; Contents: 1 x lead with 45-85cm Pacing Lead anchoring sleeve, stylet & guide, 1 x vein
lifter, 2 x fixation tools, extra stylets
PART A - Prostheses List by Category, Groups and Sponsor Page 23 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
St. Jude Medical Australia Pty LtdSJ023 TENDRIL SDX 1488T, 1388T Single, Active Fixation, Steroid Eluting, 46cm-58cm
Low Polarisation Lead, IS-1
Patches, Myocardial
W L Gore & AssociatesGT117 Gore-Tex - Cardiovascular Patch ePTFE 0.4mm Thickness 2 x 9cmGT118 Gore-Tex - Cardiovascular Patch ePTFE 0.4mm - 3 x 6cm
0.6mm - 2.5cm x 15cm & 5cm x 7.5cm
GT120 Gore-Tex Cardiovascular Patch ePTFE 0.6mm Thickness 5 x 15cmGT121 Gore-Tex Cardiovascular Patch ePTFE 0.6mm Thickness 10 x 15cmGT122 Preclude Pericardial Membrane ePTFE 0.1mm Thickness 6 x 12cmGT123 Preclude Pericardial Membrane ePTFE 0.1mm Thickness 8 x 16cmGT124 Preclude Pericardial Membrane ePTFE 0.1mm Thickness 12 x 12cmGT125 Preclude Pericardial Membrane ePTFE 0.1mm Thickness 15 x 20cmGT126 Acuseal Cardiovascular Patch Vascular ePTFE 0.5mm Thickness 1 x 9cm; 0.8 x 7.5cmGT127 Acuseal Cardiovascular Patch Cardiac ePTFE 0.5mm Thickness 3 x 6cm & 5 x 7.5cm
Prostheses, Blood Vessel, Artificial
Atrium Australia-Pacific Rim Pty LtdAC002 Atrium PTFE Vascular Graft Straight PTFE Standard Wall 6mm x 10cm - 10mm x 90cm
Prostheses, Cardiac Valve, Artificial
Advanced Biomedical Pty LtdAB001 ATS medical open pivot aortic valved Pyrolythic Carbon, Double Velour 21-33mm
graft model 502AG Polyester, Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 24 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AB002 ATS medical open pivot heart valve Pyrolythic Carbon, Double Velour 16-33mmmodel 500FA standard flexi-cuff aortic Polyester, Titaniumvalve series, ATS medical open pivot heart valve model 501DM advanced performance mitral valve series, ATS medical open pivot heart valve model 501DA advanced performance aortic valve series, ATS medical open pivot heart valve model 500DM mitral standard valve seriesEdwards Lifesciences Pty Ltd
EL029 SE SIL Ball Valve Aortic Models Starr Edwards - Silastic Ball Valve. 16mm-34mm1200/1260, SE SIL Ball Valve Mitral Composition: Stellite Alloy No. 21;
Polytetrafluroethelyne; polypropylene cloth; Silicone rubber (contains 2% by weight barium sulphate for radiopacity)
Hjorth Health Pty LimitedHH001 Omnicarbon 4000 4523 Mitral UPP Pure pyrolitic carbon mono-leaflet Aortic - Sizes 19mm - 27mm; Mitral -
SupraAnnular and Omnicarbon 4000 prosthetic heart valve Sizes 27mm - 33mm4313 Aortic UPP
Medtronic Australasia Pty LtdMC013 Medtronic Hall Heart Valve Aortic Model A7700/M7700 Titanium. Pyrolite. A7700 - Diameter 20-31mm, M7700 -
A7700, Medtronic Hall Heart Valve Mitral Dacron, A7700EZ/M7700EZ Titanium. Diameter 23-33mm, A7700EZ - DiameterModel M7700, Hall Easy Fit Aortic Heart 19-29mm, M7700EZ - Diameter 23-31mmValve Model A7700, Hall Easy Fit Mitral Heart Valve Model M7700
MC198 Medtronic Hall rotatable aortic valved Titanium, pyrolite, dacron 20 - 33mmcollagen impregnated conduit Model R7700
MC292 Advantage Heart Valve - Aortic Model A7760 - Pyrolytic carbon, PET Diameter 19-31 mmMC324 Advantage Supra Aortic Heart Valve Mechanical Heart Valve Pyrolite Carbon Diameter (mm): 19 - 25
leaflets Pyrolite carbon ring
Reid HealthcareRH001 Aortic On-X Prosthetic Heart Valve 27-29mm, 19mm, 21mm, 23mm, 25mm,
Models ONXA-19; ONXA-21; ONXA- 25-33mm, 27-29mm, 31-33mm, 23mm, 23; ONXA-25; ONXA-27/29; ONXM-23; ONXM-25; ONXM-27/29; ONXM31/33;
St. Jude Medical Australia Pty LtdSJ036 St Jude Medical Coated Aortic Valved Coated Aortic Valved Graft 21mm - 33mm
PART A - Prostheses List by Category, Groups and Sponsor Page 25 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SJ037 St Jude Medical Aortic Expanded Cuff Aortic Expanded Cuff, Aortic Aortic Expanded 19 -31mm, Aortic Heart Valve; St Jude Medical Aortic Hemodynamic Plus Cuff, Mitral Hemodynamic 17 - 27mm, Mitral Hemodynamic Plus Cuff Heart Valve; St Hemodynamic Cuff, Aortic & Mitral Hemodynamic 17 -27mm, Rotatable 17 - Jude Medical Mitral Hemodynamic Plus 33mmCuff Heart Valve; St Jude Medical Mechanical Heart Valve Masters Series
SJ039 St Jude Medical Regent Prosthetic Heart Standard Cuff - Model 17AGN-751 - Standard cuff - 17-29mm, Flex cuff - 17-Valves 29AGN-751, Flex Cuff - Model 29mm
17AGFN-756 - 29AGFN-756
Tag MedicalTM002 CarboSeal Ascending Aortic Prosthesis, Mechanical Conduit AP 21-33mm
sterile, CarboSeal Ascending Aortic Prosthesis with Handle Model AP21, Model AP23, Model AP25, Model AP27, Model AP29, Model AP31, Model AP33
TM003 SuMit - Supra-Annular Mitral Valve: Mechanical Valve 16mm to 33mmCarbomedics Aortic Model S500 Supra Annular Prosthetic Heart Valve: Carbomedics Model 700 Mitral Prosthetic Heart Valve: CarboMedics Aortic Model A500 Prosthetic Heart Valve: CarboMedics Aortic Model R500 Reduced Tissue Annulus Diameter
Prostheses, Cardiac Valve, Biological
Edwards Lifesciences Pty LtdEL030 CE Supra Annular Aortic Valve Model Carpentier-Edwards SAV Bioprosthesis. 19mm-33mm
2650 Carpentier-Edwards S.A.V Composition: Porcine Valve; Elgiloy Bioprosthesis Model 6650 Mitral Valve Alloy; Silicone Rubber,
EL031 Carpentier-Edwards Perimount Pericardial Carpentier-Edwards Pericardial Models 2900/6900 19-33mm, Model Bioprosthesis - Models 2900/6900 Bioprosthesis. Composition: Bovine 6900P 25, 27, 29, 31, 33mmCarpentier-Edwards Perimount Plus Pericardium; Elgiloy Alloy; Silicone Pericardial Bioprosthesis Mitral - Model Rubber, Polytetrafluoroethylene6900P
EL032 Baxter Edwards Prima Plus Stentless Edwards Prima Plus. Porcine Valve; 19mm-29mmBioprosthesis Model 2500P Prosthetic Woven Polyester Cloth.Heart Valve
PART A - Prostheses List by Category, Groups and Sponsor Page 26 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EL039 Edwards Perimount Magna Model 3000 Carpentier-Edwards Perimount Magna 19MM Aortic Pericardial Tissue Valve; composition: Glutaraldehyde treated 21MM Aortic Pericardial Tissue Valve; bovine pericardium/elgiloy wireform 23MM Aortic Pericardial Tissue Valve; stent/polyester band/silicone rubber 25MM Aortic Pericardial Tissue Valve; suture ring/polytetrafluoroethylene 27MM Aortic Pericardial Tissue Valve; cloth/polyester cloth. 29MM Aortic Pericardial Tissue Valve
Medtronic Australasia Pty LtdMC012 Medtronic Hancock Valved Conduit Porcine bioprosthesis, dacron 12, 14, 16, 18, 20, 22, 25, 30mm.
Model 100/150
MC015 Medtronic Freestyle modified Models FR995MS, FR995 - Porcine 19 - 27mm, 19 - 29mm, 19 - 35mm, 21 -subcoronary aortic root bioprosthesis Bioprosthesis, dacron, Models 305, 305C, 33mm(Model 995MS); Medtronic Freestyle 310, T505, T510 - Porcine aortic root bioprosthesis (Model FR995); bioprosthesis, polyester Medtronic Mosaic Aortic heart Valve Model 305; Medtronic Mosaic Mitral heart Valve Model 310; Medtronic Hancock II heart valve model T510 Mitral; Medtronic Hancock II heart valve model T505 AorticSt. Jude Medical Australia Pty Ltd
SJ038 St Jude Medical Toronto SPV Valve Tissue Heart Valves, Bioimplant TSPV: 21 - 29mm, Bioimplant Aortic: 21-Model SPA-101, St Jude Medical 27mm, Bioimplant Mitral: 27-32mmBioimplant Heart Valve
SJ069 St Jude Medical Biocor Porcine St Jude Medical Biocor Porcine Aortic Valves - Tissue Annulus Diameter Prosthetic Heart Valve Prosthetic Heart Valve is manufactured - 21-29mm, Implant Height - 11-15c;
from selected procine aortic valve cusps Mitral Valves - Tissue Annulus Diameter -that have been cross-linked with a 25-35mm, Implant Height - 8-10mm
Recorders, Long Term, ECG, Implantable
Medtronic Australasia Pty LtdMC028 Medtronic Reveal ILR Model 9525, Titanium 8cc
Implantable Cardiogram Recorder; Reveal Plus Implantable Loop Recorder
PART A - Prostheses List by Category, Groups and Sponsor Page 27 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Single Chamber ICDsGeneration 1
St. Jude Medical Australia Pty LtdSJ058 St Jude Medical Australia Ventritex Contour MD Models V - 175 AC, V-175C 57-65cc, 109 - 118g
Contour MD Models V-175AC, V-175D and V-175D Single chamber and V- 175C Defibrillators/Cardioverters Defibrillators/Cardioverters
Generation 2
Biotronik Australia Pty LtdBT044 Belos VR (4085), Implantable Single Chamber ICD, Rate Responsive One Size Only
Cardioverter Defibrillator
BT054 Lexos VR Single chamber ICD, Rate responsive One size only.
Medtronic Australasia Pty LtdMC201 Medtronic A/Asia Gem III VR Model Titanium One size only, 39.2cc
7231CX
Progressive MedicalPG001 Alto II VR Single Chamber ICD Debrillator, implantable, automatic
Generation 3
Biotronik Australia Pty LtdBT043 Belos A+, Implantable Cardioverter Single Chamber ICD, Rate Responsive One Size Only
Defibrillator Pacing, Dual Chamber Sensing
BT055 Lexos A+ Single chamber ICD, rate responsive One size only.pricing, dual chamber sensing.
Guidant Australia Pty LtdGU110 Ventak Prizm II VR Model 1860, titanium, single chamber, One size only
adaptive rate
GU133 Vitality VR Model 1870 This device acts to defibrillate the heart Model 1870 Vitality VR Single Chamber chambers when the patient enters into an Rate Responsive Pacemaker/Defibrillatorarrhythmia or uses shocks or anti tachy pacing to revert Ventricular Tachycardia (VT) or Ventricular Fibrillation (VF). While also acting as a single chamber
PART A - Prostheses List by Category, Groups and Sponsor Page 28 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GU148 Vitality 2 EL VR - Model T177 Implantable Cardiac Defibrillator 35cc 90gGU151 Vitality 2 VR - Model T 175 Implantable cardiac defibrillator 30cc; 82g
Medtronic Australasia Pty LtdMC253 Medtronic Marquis VR 7230CX Titanium, Sterile, Single Chamber Volume 36cc
Implantable Cardioverter Defibrillator
MC317 Maximo VR Model 7232Cx Titanium One size only 38.5cc
St. Jude Medical Australia Pty LtdSJ010 Photon Micro VR Model V-194 36cc
Defibrillators/Cardioverters
SJ048 Epic Plus VR Model V-196 Implantable Single Chamber sensing and bradycardia 32ccCardioverter Defibrillator pacing
Single Chamber PacemakersGeneration 1
Biotronik Australia Pty LtdBT036 PHILOS S Implantable Cardiac Pulse Multiprogrammable SSI One size only
Generator Cat No 122 453
BT037 AXIOS S Implantable Cardiac Pulse Multiprogrammable SSI One size onlyGenerator Cat No 338 847
Medtronic Australasia Pty LtdMC224 Medtronic Vitatron Jade 3 SSI Model 340 Titanium, polyurethane One size only
Pacemaker
MC234 Vitatron Vita 2 SSI Model 230, Titanium, polyurethane One size onlyImplantable Cardiac Pacemaker
MC287 Vitatron C10S Pacemaker Titanium, polyurethane one size only
St. Jude Medical Australia Pty LtdSJ020 REGENCY SC+ 2402L Single Chamber, VVI, Autocapture, IS-1 8.6cc, 18.5gmSJ052 Verity Adx Models XL SR 5156 and XL Single Chamber multi-programmable 11cc, 23g Also grouped in Single
SR 5157 M/S implantable pacemaker rate-adaptive pacing devices with Chamber Pacemaker extended longevity Generation 2 and 3
SJ053 Verity Adx Model XL SC 5056 Single Chamber multi-programmable rate- 10.5cc, 23gimplantable pacemaker adaptive pacing device with extended
longevity
PART A - Prostheses List by Category, Groups and Sponsor Page 29 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Generation 3
Biotronik Australia Pty LtdBT028 Philos SR Model 122459 Implantable Multiprogrammable, rate responsive, One size only
Pacemaker
BT030 Philos SR-B Model 122610 Implantable Multiprogrammable, rate responsive, 5/6mm port, One size onlyPacemaker
BT038 AXIOS SR Implantable Cardiac Pulse Multiprogrammable, rate responsive, One size onlyGenerator Cat No 338 851
BT046 Protos VR/CLS Single chamber rate responsive, closed One size onlyloop system.
BT062 Philos II SR Multiprogrammable, Rate Responsive, One size onlySSIR pacemaker
Guidant Australia Pty LtdGU067 Pulsar Max II Pacemaker SSIR Model 1180, Model 1181GU124 Insignia Entra SR Models 1195 & 1198 Single Chamber Rate Responsive One size only
Permanent Pacemaker
GU126 Insignia Plus SR Model 1194 Single Chamber Rate Responsive One size onlyPermanent Pacemaker
GU139 Insignia Ultra SR Lodel 1190 Implantable Cardiac Pacemaker One size only
Medtronic Australasia Pty LtdMC213 Medtronic Vitatron Clarity SSIR Model Titanium, polyurethane One size onlyMC223 Medtronic Vitatron Topaz 3 SSIR Model Titanium, polyurethane One size only
540 Pacemaker
MC236 Vitatron Vita 2 SSIR Model 530, Titanium, polyurethane One size onlyImplantable Cardiac Pacemaker
MC288 Vitatron C20SR Pacemaker Titanium, polyurethane one size onlyMC321 EnPulse SR Series: Model E2SR01, EnPulse SR - Pacemakers - with IS1 One size only
Model E2SR03, Model E2SR06 connector; with 3.2mm low profile connector; with 5mm connector.
St. Jude Medical Australia Pty LtdSJ022 REGENCY SR+ 2400L Single Chamber, Rate Response, 8.6cc, 18.5gm
Autocapture, IS-1
PART A - Prostheses List by Category, Groups and Sponsor Page 30 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SJ025 St Jude Medical Integrity SR5142 Single chamber, rate responsive Volume 10.4cc, weight 23gmPacemaker, Cardiac Implantable
SJ029 Integrity Micro SR 5136 Pacemaker Single Chamber Rate Responsive Volume 8cc, weight 18gmSJ030 Identity SR 5172 Single Chamber Rate Responsive Volume 8cc, Weight 17gmSJ055 Integrity ADx Model SR 5160 implantable Single Chamber multi-programmable rate- 8cc, 17g
pacemaker adaptive pacing device
SJ060 Identity ADx Model SR 5180 implantable Single Chamber multi-programmable rate- 8cc, 18gpacemaker adaptive pacing device
Special Implantable Cardioverter Defibrillator LeadsGroup 2 - Subcutaneous Leads
Guidant Australia Pty LtdGU123 Endotak SQ Array XP Lead Model 0085 Endotak SQ Array XP Lead Model 0085 70 cm
is used in addition to an Endotak endocardial leads for patients with a high DFT (Defibrillation Threshold)
Medtronic Australasia Pty LtdMC251 Implantable Subcutaneous Defibrillator Silicone and Platinum Alloy Lengths 41-85cm inclusive
Lead Model 6996SQ 41cm, 58cm, 85cm
Group 7 - Epicardial Patches
Medtronic Australasia Pty LtdMC027 Model 6721 Unipolar Epicardial Patch Model 6721S-50, Model 6721M-50, 370, 660, 840mm
Leads S/M/L Model 6721L-50; Silicone
Special Purpose Dual Chamber Pacemaker - Custom HeaderGeneration 1
Medtronic Australasia Pty LtdMC032 Medtronic Kappa 700 Pacemaker Model Titanium 11.9cc, 14.2cc
KD700, KD701
MC250 Medtronic Kappa Pacemaker Model Cardiac Pacemaker, Titanium One size onlyKD901and Model KD903
MC334 Medtronic Kappa Pacemaker Model Cardiac Pacemaker, Titanium One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 31 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC335 Medtronic Kappa 700 Pacemaker Models Titanium 10.9 - 14.2ccKD703 and KD706
Generation 3
Medtronic Australasia Pty LtdMC029 Medtronic Kappa 400 pacemaker Model Titanium 13.9cc
KDR401
MC031 Medtronic Kappa 700 Pacemakers Model: Titanium 10.9cc - 14.2cc KDR700, KDR701, KDR720, KDR721, KDR721C, KDR730, KDR731, KDR733
MC034 Medtronic Kappa 700 Pacemaker Model Titanium 9.7cc, 11.0ccKSR700/701/701C/703/706;
MC209 Medtronic Vitatron Clarity DDDR Model Titanium, polyurethane One size onlyMC211 Medtronic Vitatron Clarity DDDR Model Titanium, polyurethane One size onlyMC241 Medtronic Kappa Pacemaker Model KDR Cardiac Pacemaker, Titanium 13.9ccMC242 Medtronic Kappa KSR 900 Model KSR Cardiac Pacemaker, Titanium 9.7,10.5,11.0 cc
901,903, 906
MC332 Medtronic Kappa Pacemaker KDR 903 Cardiac Pacemaker, Titanium 13cc, 14.2ccand KDR 906
MC339 Medtronic Kappa 700 Pacemakers Model: Titanium 10.9cc - 14.2cc KDR703 and KDR706
MC340 Medtronic Kappa 400 pacemaker Model Titanium 13.9ccKDR403
St. Jude Medical Australia Pty LtdSJ018 AFFINITY DR 5330L, 5330R, 5331M/S Dual chamber, rate responsive, 11cc, 23-23.5gm
autocapture, left sided/right sided, IS-1 Dual chamber, rate responsive, extended
Special Purpose ICDs - High energy productsGeneration 1
Medtronic Australasia Pty LtdMC019 Medtronic Gem DR Model 7271 Titanium 62ccMC020 Medtronic Gem Model 7227Cx; Gem Titanium 49cc, 40cc
Model 7227 Implantable Cardioverter
PART A - Prostheses List by Category, Groups and Sponsor Page 32 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Generation 2
Guidant Australia Pty LtdGU107 Ventak Prizm HE DR Model 1853 & Model 1858, titanium, dual One size only
chamber, adaptive rate
Generation 3
St. Jude Medical Australia Pty LtdSJ011 Atlas DR Model V-240 Dual chamber implantable cardioverter 37cc
defibrillator with rate response
SJ012 Atlas VR Model V-199 Single chamber implantable cardioverter 36ccdefibrillator with rate response
SJ063 Atlas DR Model V-242 ICD Implantable Dual Chamber Cardio-verter 38cc/78gDefibrillator
SJ065 Atlas + VR Model V-193 ICD Single chamber implantable cardio-verter 38cc, 77gdefibrillator
SJ066 Atlas + VR - C Model V-193C ICD Single chamber implantable cardio-verter 38cc, 77gdefibrillator
SJ068 Atlas + DR Model V-243 ICD Implantable Dual Chamber Cardio-verter 38cc, 78gDefibrillator
Special Purpose ICDs - With custom headersGeneration 1
Medtronic Australasia Pty LtdMC237 Gem Model 7227B Implantable Titanium, "B" Style Connector 56cc
Cardioverter Defibrillator
MC238 Gem Model 7227D Implantable Titanium, "D" style connector 53ccCardioverter Defibrillator
MC239 Gem Model 7227EImplantable Titanium, "E" style connector 55ccCardioverter Defibrillator
PART A - Prostheses List by Category, Groups and Sponsor Page 33 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Special Purpose ICDs - With therapies for Atrial TachyarrhythmiaGeneration 2
Medtronic Australasia Pty LtdMC227 Medtronic Gem III AT Model 7276 Titanium 39.5cc
Implantable Cardioverter Defibrillator
Generation 3
Guidant Australia Pty LtdGU137 Vitality AVT Dual or single chamber pacemaker One size onlyGU157 Vitality AVT - Model A155 Implantable cardiac defibrillator with both 30cc
Atrial and Ventricular tachyarrhythmia therapy
Special Purpose ICDs with CRT - High energy productsGeneration 2
Guidant Australia Pty LtdGU144 Contak Renewal 4 HE CRT-D Model Implantable dual-chamber defibrillator one size only
H197, Model H199
St. Jude Medical Australia Pty LtdSJ064 Atlas + HF Model V - 341 ICD - Atlas + HF ICD is a cardioverter 40cc/81g
Defibrillator, Implantable, automatic, defibrillator with dual chamber (atrial and dual-chamber RV) sensing and bradycardia Pacing with
ventricular resynchronisation therapy.
Special Purpose ICDs with CRT - With therapies for Atrial Generation 2
Guidant Australia Pty LtdGU154 Contak Renewal 4 AVT CRT -D - Model Implantable Cardioverter Defibrillator 37cc; 89g
M170 and M175 with Cardiac Resynchronisation Therapy
GU155 Contak Renewal 4 AVT HE CRT - D - Implantable Cardioverter Defibrillator 40cc; 89gModel M177, M179 with cardiac resynchronisation Therapy
PART A - Prostheses List by Category, Groups and Sponsor Page 34 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Special Purpose Pacemaker - Small size (<7cc) for pacing in infantsGeneration 3
St. Jude Medical Australia Pty LtdSJ027 St Jude Medical Microny II SR+ Model Single Chamber Rate Responsive Volume 5.9cc, Weight 12.8gm
2525T Pacemaker
Special Purpose Pacemaker - with Therapies for Atrial Generation 3
Medtronic Australasia Pty LtdMC200 Medtronic A/Asia AT500 DDDRP Pacing Titanium, silicone One size only, 14.9cc
System Model AT501
MC326 PreventAF Model 920 Pacemaker, Cardiac, Implantable, 24.7g , 12.1cm3Titanium, Polyurethane, and Silicone
Special Purpose Pacemaker Leads - Catheter DeliveredGroup 9 - Transvenous, Bi-Polar, Active, Steroid, Right Ventricular/Atrial
Medtronic Australasia Pty LtdMC301 Model 3830 PACING LEADS Active fixation pacemaker lead 59 - 75 cm
Composition: Insulation is polyurethane, Electrodes are Titanium Nitride coated Platinum, the screw is steriod-coated
Special Purpose Pacemaker Leads - VDD LeadsGroup 7 - Transvenous, Bi-Polar, Passive, Non-Steroid, Right Ventricular/Atrial
Biotronik Australia Pty LtdBT009 SL Tripolar Lead - SL60/130, Single pass lead 130mm, 150mm, 110mm
BP,SL60/150-BP, SL60/110-BP
Group 8 - Transvenous, Bi-Polar, Passive, Steroid, Right Ventricular/Atrial
Guidant Australia Pty LtdGU028 Guidant Aust Selute Picotip VDD Lead Model 4340, Model 4341, Model 4342 &
Model 4343
PART A - Prostheses List by Category, Groups and Sponsor Page 35 of 666
CARDIO-THORACIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Australasia Pty LtdMC052 Medtronic Capsure VDD2 Model 5038 Silicone; Contents: 1 x lead with 11.5cm, 13.5cm, 15.5cm Also grouped in
AV Pacing Lead anchoring sleeve, stylet & guide, 1 x vein Pacemaker Lead Group 9lifter, 2 x fixation tools, extra stylets
MC220 Vitatron Brilliant S+Model IMW Pacemaker Leads, Vitatron Brilliant 52-65cmS+Models IMW 14Q, IMW 15Q, IMW 16Q, IMW 17Q, IMW 18Q, titanium,
Special Purpose Single Chamber Pacemaker - Custom HeaderGeneration 1
St. Jude Medical Australia Pty LtdSJ019 REGENCY SC 2406L, SCX 2408L, SC Single Chamber, Standard VVIC, IS-1/5- 8.6cc, 18.5-19gm
2407M/S
Generation 3
Medtronic Australasia Pty LtdMC030 Medtronic Kappa 400 Pacemaker Model Titanium 11.6cc, 11.7cc
KSR401
MC214 Medtronic Vitatron Clarity SSIR Model Titanium, polyurethane One size onlyMC215 Medtronic Vitatron Clarity SSIR Model Titanium, polyurethane One size onlyMC330 Medtronic Kappa 400 Pacemaker Model Titanium 11.6cc, 11.7cc
KSR 403
St. Jude Medical Australia Pty LtdSJ017 AFFINITY SR 5130L, 5130R, 5131M/S Single chamber, rate responsive, 10.4cc, 22-23gm
autocapture, left sided/right sided, IS-1 Single chamber, rate responsive, extended
PART A - Prostheses List by Category, Groups and Sponsor Page 36 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Cannulae, Eye, Lacrimal
Device Technologies Australia Pty LtdDE191 Canaliculus Intubation Sets Silicone, SS & Nylon 17.7 x .064 x 29cm, 15.5 x .051 x 33cm
Caps, Bone
Medtel Australia Pty LtdME078 BAHA - Bone Anchored Hearing Aids Cover screw unigrip One size only
Cement
Endotherapeutics Pty LtdET031 Serenocem Cement Reaction bonded polymer composite One size only - box of 2
formed by the neutralisation gelletation of a basic inorganic ionomer
ET032 Serenocem Granules Reaction bonded polymer composite 0.5 - 1mm granules, 1gm or 5gm; 2 - formed by the neutralisation gelletation of 3mm granules, 1gm or 5gm - 3 pouchesa basic inorganic ionomer
Cochlear Implants
Cochlear LimitedCO012 SPrint Speech Processor (INITIAL) Consists of: SPrint Speech Processor - Processor: One Size Only, Transmit
body worn speech processor to suit Cable, 8-28cm, Headset Cable 45-100cm,Nucleus 24 cochlear implant system; Headset: 0.5-4.0 magnet strength, Hook transmit cable; headset cable; headset; battery case - double; batteries - AA; microphone cover; belt clip; and hook
CO015 Spectra Speech Processor Conists of: Spectra - body worn speech Processor: One Size Only, Transmit processor for Nucleus 22 system; Cable: 8- 28cm Headset Cable: 45 -transmit cable; headset cable; and headset 100cm Headset: 0.5-4.0 magnet strength
PART A - Prostheses List by Category, Groups and Sponsor Page 37 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
CO017 SPrint Speech Processor Consists of: SPrint Speech Processor - Processor: One Size Only, Transmit body worn speech processor to suit Cable, 8-28cm, Headset Cable 45-100cm,Nucleus 24 cochlear implant system; Headset: 0.5-4.0 magnet strength, Hook transmit cable; headset cable; headset; battery case - double; batteries - AA; microphone cover; belt clip; and hook
CO018 ESPrit 3G Speech Processor - Initial Includes speech processor with titanium Cable lengths: 6, 8, 10, 20, 28cmear hook, 6 high powered zinc air batteries, cleaning brush, microphone puffer, earmould compatible earhook, soft earhook cover, magnet, drying capsules, accessory adaptor and socket covers, signal check, coil/cable (x2),
CO019 ESPrit 3G Speech Processor - Includes speech processor with titanium Cable lengths: 6, 8, 10, 20, 28cmear hook, 6 high powered zinc air batteries, cleaning brush, microphone puffer, earmould compatible earhook, soft earhook cover, magnet, drying capsules, accessory adaptor and socket covers, signal check, coil/cable (x2),
Pacing Importers Pty LtdPI005 Combi C40+ Implantable Auditory One Size Only
Drains, T
Endocorp Pty LtdEC013 Campbell Endolymphatic T-Shunt Silicone rubber 0.125 mm dia
Ear/Nose/Throat Treatment Units
Pacific MedicalPM065 Tympo Vent Otological ventilation tubes, short medium Length 2.2
term, Donaldson fluoroplastic/blue
PM066 Tympo Vent Otological ventilation tubes, straight tube Length 7.0 - 7.2mmPM068 Tympo Vent Otological ventilation tubes, short medium Length 2.8
term, star tube, silicone
PART A - Prostheses List by Category, Groups and Sponsor Page 38 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
PM072 Tympo Vent Otological ventilation tubes, short medium Length 12.4 term, shepard with tail, silicone/blue
PM074 Tympo Vent Otological ventilation tubes, paparella Length 2.2mmwith tab
PM075 Tympo Vent Otological ventilation tubes, collar button, Length 1.5mm tubingen type gold, gilded silver
PM079 Tympo Vent Otological ventilation tubes, t-tube Length 6 - 12mmPM083 Tympo Vent Otological ventilation tubes, long term, Length 1.5
collar button - tubingen type, titanium
PM086 Tympo Vent Otological ventilation tubes, short medium Length 1.6 term, reuter bobbin without holes, titanium
PM087 Tympo Vent Otological ventilation tubes, short medium Length 1.5 term, reuter bobbin with holes, stainless
PM088 Tympo Vent Otological ventilation tubes, donaldson, Length 1.5mm - 9.8mmreuter bobbin, shepard
PM089 Tympo Vent Otological ventilation tubes, short medium Length 1.8 term, bevel bobbin, fluoroplastic/blue
PM090 Tympo Vent Otological ventilation tubes, armstrong Length 3.8 - 10.0mmPM091 Tympo Vent Otological ventilation tubes, short medium Length 2.0
term, collar button, fluoroplastic/blue
Grafts
Pacific MedicalPM107 Laryngeal Keel 12-16mm Keel
PART A - Prostheses List by Category, Groups and Sponsor Page 39 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Hearing Aids
Medtel Australia Pty LtdME176 BAHA - Bone Anchored Hearing Aid - The BAHA Hearing Aids (Compact, To be claimed only for
Various Models Classic 300 & Cordelle II in various patients with deafness colours) are the external hearing who have problems processors which are attached to the using air conduction or implanted titanium fixture by a snap conventional hearing coupling. This allows the sound aids which is made transmission using bone conduction for worse when a hearing patients where conventional hearing aid mould is worn.
Larynxes, Artificial
Pacific MedicalPM057 Provox Voice Prosthesis Long term indwelling; Silicone 4.5,6,8,10,12.5mm Only able to be claimed
once for the initial
Middle Ear Analyzers
Medtronic Australasia Pty LtdMC256 Pressure Pulse Generator Meniett 20 Composition - Polycarbonate One size only To be claimed only
where medical therapy such as lifestyle (general health assessment and stress reduction) and oral medications (diuretics, anti-emetics, anti-vertigo and steriods) have been unsuccessful
PART A - Prostheses List by Category, Groups and Sponsor Page 40 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Nasal Septum Buttons
Global Scientific Pty LtdGS070 Septal Button Plastipore One size only
Medtronic Australasia Pty LtdMC264 Septal Button Silicone 3cm
Plugs
Medtel Australia Pty LtdME075 BAHA - Bone Anchored Hearing Aids Abutment Snap Coupling 5.5mm
Prostheses, Ear
Endocorp Pty LtdEC008 Exmoor Middle Ear Prostheses - Causse Consists of three components: a dense Mushroom = 3.0 mm flange dia; 1.5mm
Universal HA Prosthesis hydroxylapatite white mushroom; a clear length. Clear tube = 20.0mm length x teflon tube & a white teflon plug. 1.32 dia o.d. White plug = 5.0mm length
x 0.4 dia o.d.
EC009 Exmoor Middle Ear Prostheses - Mills Hydroxylapatite 2.0 mm dia od x 1.0mm dia id x 3.5 mm Incus HA Sleeve length
EC010 Exmoor Middle Ear Prostheses - Mills Hydroxylapatite 2.0 mm dia od x 1.0mm dia id x 2.0 mm Incus HA Sleeve length
EC011 Exmoor Middle Ear Prostheses - Mills Teflon 0.5/1.0 mm diaColumella
EC012 Exmoor Middle Ear Prostheses - Attic to Silicone rubber 0.125 mm diaAntrum Implant
EC014 Exmoor Middle Ear Prostheses - Middle Silicone rubber 0.125 mm diaEar Aeration Sheeting
EC015 Exmoor Middle Ear Prostheses - Teflon Hydroxylapatite 0.6 mm dia od x 0.7 mm dia id x 6.1 mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 41 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EC016 Exmoor Middle Ear Prostheses - Teflon Hydroxylapatite 0.4 mm dia od x 0.7mm dia id x 6.1 mm length
Global Scientific Pty LtdGS019 Canal Wall Prosthesis Grote, HA Small - Large
Pacific MedicalPM028 Stapes Bell/Aerial/Angular Prosthesis/Piston - 1.75 - 7.00mm
Gold/Titanium
PM032 K-Piston Gold/Titanium ID 0.4,0.6mm
Prostheses, Larynx
Endotherapeutics Pty LtdET040 Vox Implants Vox Implants are solid, irregularly One size only
textured, medical grade Polydimethylsiloxane Elastomer implants suspended in a hydrogel carrier
Global Scientific Pty LtdGS124 Vocal Cord Medialisation Implant Vocom Larynx Medial Implant - 3 - 7mm Head
Hydroxylapatite
GS125 Vocal Cord Medialisation Implant Vocom Shim for Medial Implant - 1mm - 3mm OffsetHydroxylapatite
Pacific MedicalPM033 Montgomery Thyroplasty Implant System Silicone 6,7,8,9,10,11,12
Prostheses, Ossicular
BR & CT Enterprises Pty LtdBC001 Titanium Head To suit blue or grey implantsBC003 Tympanic Cavity Partial Implant Hydroxylapartite, 90 degree and 75 Total length 3.75mm - 5.00mm; Head
diameter 2.50mm - 4.00mm
BC004 Titanium PORP with Fixed Bell and Maximum lengths of 5.0mm (grey) and Removable Head 5.5mm (blue) - adjustable in 1mm
increments; 0.3mm diameter
PART A - Prostheses List by Category, Groups and Sponsor Page 42 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BC006 Tympanic Cavity Total Implant Hydroxylapartite, 90 degree and 75 Total length - 8mm; Head diameter - 3.5mm, 3.6mm
O R Paradigm Pty LtdOS002 Ossicular Prostheses - PORP ALTO (adjustable Length Titanium Head Size 2.5mm x 3.5mm; Length
Ossicular) Partial 2.0mm - 5.6mm; Distal Diameter 1.2mm
OS004 Ossicular Prostheses - TORP/PORP OtoSil Universal Head Size 3.5mm; Length 8.0mm; Shaft Diameter 1.0mm
OS005 Ossicular Prostheses - PORP OtoSil Partial Head Size 3.0mm - 4.0mm; Length 6.0mm; Cannulation Diameter 1.12mm
OS007 Ossicular Prostheses - PORP Dense HA Partial Head Size 3.0mm - 4.0mm; Length 5.0mm; Cannulation Diameter 1.17mm
OS008 Ossicular Prosthese - PORP Dense HA Footplate Shoe Width 2.0mm; Height 1.32mmOS010 Ossicular Prostheses - PORP Dense HA Partial Incus Strut Length 5.0mm; Cannulation Diameter
1.17mm
OS011 Ossicular Prostheses - PORP Gator Stapes Shaft Diameter 0.6mm; Length 3.5mm - 5.5mm
OS012 Ossicular Prostheses - PORP Titanium Bucket Shaft Diameter 0.4mm - 0.8mm; Length 4.0mm - 5.0mm
OS013 Ossicular Prostheses - PORP Causse Type Fluoroplastic Stapes Shaft Diameter 0.4mm - 0.8mm; Length 3.5mm - 6.0mm; Loop Diameter 0.6mm
Prostheses, Ossicular, Incus and Stapes
BR & CT Enterprises Pty LtdBC002 Platinum - Teflon Piston with flat band Diameter 0.4mm - 0.6mm; Functional
length 3.00mm - 6.00mm
Global Scientific Pty LtdGS020 Ossicular Prosthesis Malleus, Incus and Goldenberg Footplate - HA One size only
Stapes
GS021 Ossicular Prosthesis Attic Defect Plate, HA 7-14mmGS022 Ossicular Prosthesis Incus a) Applebaum HA, b) Goldenberg HA, a) small - large, b) one size only, c) short,
c) Kartusch HA , d) Grote HA, e) Wehrs medium, long, d) 7-10mm, e) short, (single & double notched) HA average, medium, long
PART A - Prostheses List by Category, Groups and Sponsor Page 43 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GS023 Ossicular Prosthesis - PORP Sheehy plastipore, Drum to stapes, Grote One size onlyMalleus to stapes, modified, centered or offcentered
GS032 Ossicular Prosthesis - PORP/TORP Goldenberg Malleable/HA One Size OnlyGS033 Ossicular Prosthesis Incus a) Grote HA, b) Wehrs (single & double a) one size only, b) Short, medium, long
notched) HA
GS042 Piston: Stapes Prosthesis a) Schuknecht Malleus att Piston. a) 0.6x5.5mm-0.8x6.5, b) 0.3x0.8x3.5-Stainless steel, b) Cawthorne. 0.3x0.8x6mm, c) 0.6x0.6x3.5-Fluoroplastic, c) Fluoroplastic, d) 0.8x0.6x6mm, Schuknecht. Stainless steel, e) Causse.
GS056 Piston: Stapes Prosthesis a) Armstrong. Platinum, b) McGee. a) 0.6x3.5-0.8x5mm, b) 0.6x3.25-Stainless steel, c) Richards. Teflon & 0.8x5.5mm,
GS058 Piston: Stapes Prosthesis Fisch-Type Platinum or Stainless Steel 0.4mm x 6mmGS060 Piston: Stapes Prosthesis Bucket Handle Fluoroplastic and stainless 0.4 x 1 x 3.5mm - 0.6 x 1 x 5mm
steel
GS061 Piston: Stapes Prosthesis Platinum Fluoroplastic 0.6x3.5mm - 0.8x5mmGS062 Piston: Stapes Prosthesis Platinum Fluoroplastic 0.6x3mm - 0.8x5.75mmGS064 Piston: Stapes Prosthesis McGee Shepherd's Crook - Stainless 0.6x3.5mm - 0.6x5.5mmGS127 Wehrs II Stapes Prostheses Wehrs HAPEX Incus Prostheses, Single 0.6 - 1.57mm Shaft Dia
& Double Notch
GS131 Dornhoffer Prostheses Hydroxyapetite head/HAPEX shaft PORP 0.8mm Shaft Dia TORP, 1.3mm Shaft and TORP Diameter PORP
GS197 Ossicular Chain Prosthesis Micron adjustable TORP/PORP. Titanium 2-10mm, 2-5mmGS198 Piston: Stapes Prosthesis Smart: Nitinol/Flouroplastic 0.5, 0.6, 0.8 x 3.75-4.75mm
Medtronic Australasia Pty LtdMC258 Ossicular, Incus and Stapes Flex H/A, Dense H/A, Titanium, SS, 0.4 - 1.17mm x 2.0 - 4.0mm x 4.25 -
Fluroplastic, Polycel
MC259 Ossicular, Incus and Stapes Flex H/A, Polycel, SS Small, Medium, Large, 0.6 x 2.2 x MC260 Ossicular, Incus and Stapes H/A, Polycel, SS 0.6 - 0.8mm x 3.0 - 4.0mm x 7.0 - MC261 Ossicular, Incus and Stapes Polycel, SS, Fluroplastic 0.6 - 1.17mm x 0.3 - 4.0mm x 4.75 - MC262 Ossicular, Incus and Stapes Platinum, Fluroplastic, SS, Polycel 0.4 - 1.17mm x 2.2 - 8.8mm x 3.5 - MC263 Ossicular, Incus and Stapes SS, Fluroplastic, Polycel 0.5 - 0.6mm x 3.5 - 6.0mm and One SizeMC266 Prostheses Ossicular Incus and Stapes H/A, Polycel, SS 0.6 - 4.0mm x 2.7 - 5.0mm x 1.5 -
PART A - Prostheses List by Category, Groups and Sponsor Page 44 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Ossicular, Total
BR & CT Enterprises Pty LtdBC007 Titanium Middle Ear Total Implant with Maximum lengths of 7.0mm (grey) and
Removable Shoe or Head 7.5mm (blue) - adjustable in 1mm increments; 0.3mm and 0.4mm in
BC008 Titanium Middle Ear Total Implant with Maximum lengths of 7.0mm (grey) and Adjustable Head 7.5mm (blue) - adjustable in 1mm
increments; 0.4mm diameter
BC009 Titanium Shoe to suit Titanium Middle Ear Implants To suit blue or grey implants
Global Scientific Pty LtdGS043 Ossicular Prosthesis -TORP a) black spanner strut HA, b) black oval a) one size only, b) 7-10mm, c) 0.5-0.7mm
top TORP HA, c) black oval top PORP, universal, HA/fluoroplastic
GS045 Ossicular Prosthesis -TORP Fisch plastipore, Causse modified One size onlyplastipore, Shea modified plastipore/ fluoroplastic, Austin modified plastipore,
GS050 Ossicular Prosthesis -TORP a) Shea malleable, HA/plastipore, b) Shea a) one size only, b) 4-8mmplastipore
Medtronic Australasia Pty LtdMC267 Ossicular, Incus and Stapes Universal Middle Ear Prosthesis, titanium Round 2.5 x 10mm, Cam 4.0 x 2.7 x
round and cam head design
O R Paradigm Pty LtdOS001 Ossicular Prostheses - TORP ALTO (Adjustable Length Titanium Head Size 2.5mm x 3.5mm; Length
Ossicular) Total 3.0mm - 8.0mm; Distal Diameter 0.8mm
OS003 Ossicular Prostheses - TORP OtoSil total Head Size 3.0mm - 4.0mm; Length 8.0mm; Shaft Diameter 1.0mm
OS006 Ossicular Prostheses - TORP Dense HA Total Head Size 3.0mm - 4.0mm; length 4.0mm - 8.0mm; Shaft Diameter 0.8mm
OS009 Ossicular Prostheses - TORP Dense HA Total Incus - Stapes Strut Length 8.0mm; Shaft Diameter 0.8mm
Stryker Australia Pty LtdST795 Titanium Middle Ear Prostheses Fisch Incus Prostheses: short, medium, 2x3mm, 2x4mm, 2 x 5mm
large, Titanium
ST796 Titanium Middle Ear Prostheses Fisch Neomalleus Prostheses, Titanium 1.1x5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 45 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST797 Titanium Middle Ear Prostheses Fisch Stapes Prostheses: short, medium, 0.4x7mm, 0.4x8.5mm, 0.4x10mmlong, Titanium
ST798 Titanium Middle Ear Prostheses Fisch Total Prostheses: with foot, Titanium 0.6x10mm
Prosthesis, Internal, Tube, Tympanostomy
O R Paradigm Pty LtdOS014 Tympanostomy Tube Titanium 0.78mm - 1.27mm diameterOS015 Tympanostomy Tube Collar Button & Straight 0.90mm-1.27mm diameterOS016 Tympanostomy Tube Paparella Types (Paparella, Tapered 1.00mm-2.03mm diameter
Lumen, Bevelled Armstrong, Sheehy)
OS017 Tympanostomy Tube Grommet - Types (Shepard, Bobbin, 1.02mm - 1.27mm diameterDonaldson)
OS018 Tympanostomy Tube T-Tube & Modified T-Tube 5mm - 12mm long; 1.14mm - 1.35mm diameter
Reconstruction Blocks, Plastic Surgery
Medtronic Australasia Pty LtdMC255 Medtronic Xomed Australia Material ePTFE - expanded polytetrafluroethyelene 0.75cm x 40cm x 0.6mm; 0.4cm x 20cm
Implantable Sterile - Gore Thyroplasty x 0.6mm; 0.6cm x 20cm x 0.6mm
MC265 Silicone Blocks Netterville Phonoform Block - Right, Right - One size only, Left - One size Left, Wedge & Strip only, Wedge - One size only & Strip -
Screws, Bone
Medtel Australia Pty LtdME076 BAHA - Bone Anchored Hearing Aids Flange fixture 3mmME077 BAHA - Bone Anchored Hearing Aids Flange fixture 4mmME137 BAHA - Bone Anchored Hearing Aids Flange Fixture - Titanium Self Tapping 3mmME138 BAHA - Bone Anchored Hearing Aids Flange Fixture - Titanium Self Tapping 4mm
PART A - Prostheses List by Category, Groups and Sponsor Page 46 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME139 BAHA - Bone Anchored Hearing Aids Flange Fixture - Titanium Self Tapping 3mm with BAHA AbutmentME140 BAHA - Bone Anchored Hearing Aids Flange Fixture - Titanium Self Tapping 4mm with BAHA Abutment
Stents
Medical Vision Australia Pty LtdMF001 Endoxane Silicone tracheal and bronchial stents - 10 - 20mm diameter, 20 - 60mm length
Dumon
William A Cook Aust Pty LtdWC074 SONG-Nasolacrimal Duct Stent Set Nasolacrimal Stent Stent 6Fr, 35mm, Stent Oval or Acute
Angle, Radiopaque proximal tip 0.5mm or Entended proximal tip.
Stents, Bronchial
Medical Vision Australia Pty LtdMF002 Tracheobronxane Silmet Nitinol wire - tracheal and bronchial 12 - 20mm diameter, 20 - 90mm length
stenets - Dumon
Stents, Tracheal
Technology For Life Pty LtdTE010 Tracheal/Broncheal Stent Silicone, Dumon 10/20 to 18/80TE011 Bronchial Tracheal Stent Silicone, Dumon 10/20 to 18/80TE012 Harrell Y Stent Tracheal Silicone, Dumon 10/10/20 to 16/16/70TE013 Westaby T Y Stent Tracheal Silicone, Dumon 10/10/20 to 16/16/90
William A Cook Aust Pty LtdWC073 Tracheal/broncheal stent Gianturco-Rosch Trancheobronchial Expanded Diameter 15-40 mm Length 5cm
PART A - Prostheses List by Category, Groups and Sponsor Page 47 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stimulators, Auditory
Cochlear LimitedCO013 Nucleus 24k Cochlear Implant Model CI24R (ST) One size onlyCO014 Nucleus Contour Cochlear Implant; Model CI24R (CS); Model CI24R (CA) One size only
Nucleus 24 Contour Advance Cochlear
CO016 ESPrit 22 Beige/Brown/Black Z88105/6/7, Consists of: ESPrit 22 Speech Processor, Processor: One Size Only, Transmit ESPrit 22 Cable, Coil, Magnet, consisting of: body (Z88105/6/7) and Cable: 8-28cm, Headset: 0.5-4.0 magnet Beige/Brown/Black Z88136/7/8 headset of cable, coil & magnet (REPLACEMENT) (Z88136/7/8); colour combination to suit
Pacing Importers Pty LtdPI006 Tempo+ Auditory Implant Speech Tempo+ Auditory Implant Speech One Size Only
Telephone Aids, Hearing-Impaired
Cochlear LimitedCO006 Nucleus 24 Cochlear Implant System Set of assistive listening & maintenance Lapel Microphone: 40-150cm, Personal
Accessories for SPrint Adult devices, consisting of: Lapel Microphone; Audiocable - one size only, Battery Personal Audiocable; Battery Charger; Charger - one size only, Pouch (adult Pouch (adult style), Ear Hook; Battery style), Ear Hook (small and large) Batterycase; Mic Lock; Lapel clip; TV/Hi-Fi case - single, Mic Lock - one size only, Cable; Mic sleeve; Dry pack; Accessory Lapel clip - one size only, TV/Hi-Fi Cable case; AC adaptor; Telecoil; and Mic clip - one size only Mic sleeve - one size
only, Dry pack - one size only Accessory case - one size only, AC adaptor - one size only, Telecoil - one size only, Mic clip - one size only
CO007 Nucleus 24 Cochlear Implant System Set of assistive listening & maintenance Lapel Microphone: 40-150cm, Personal Accessories for SPrint Child devices, consisting of: Lapel Microphone: Audiocable - one size only,Battery
40-150cm, Personal Audiocable; Battery Charger - one size only, Pouch (adult Charger; Pouch (adult style), Ear Hook; style), Ear Hook (small and large), BatteryBattery case; Mic Lock; Lapel clip; case - single, Mic Lock - one size only, TV/Hi-Fi Cable; Mic sleeve; Dry pack; Lapel clip - one size only, TV/Hi-Fi Cable Accessory case; AC adaptor; Telecoil; - one size only, Mic sleeve - one size
only, Dry pack - one size only, Accessory case - one size only, AC adaptor - one size only, Telecoil - one size only, Mic clip - one size only, FM Cable - to suit Sonic Air Easy Listener
PART A - Prostheses List by Category, Groups and Sponsor Page 48 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
CO020 Nucleus Cochlear Implant Accessory Kit Accessory set consists of accessory Lapel microphone comes in lengths of - ESPrit 3G Speech Processor adapter cable, lapel microphone & lapel 40-150cm
clip, battery cover set and accessory case
Tubes, Myringotomy
BR & CT Enterprises Pty LtdBC010 Ventilation tube Ventilation tube - Silicone - T-tube, T- 1.1mm; 1.27mm lumen
tube grommet
BC011 Ventilation Tubes - Collar Button Teflon, w/o wire 1.10mm, 1.25mm, 1.50mm lumenBC012 Ventilation Tubes - Collar Button Teflon w/wire, and titanium w/o wire 0.76mm, 1.00mm, 1.25mm, 1.50mm BC013 Ventilation Tubes - Collar Button Titanium w wire 1.00mm, 1.25mm, 1.50mm lumenBC014 Ventilation Tubes - Shepherd Teflon, w or w/o wire 1.15mm lumenBC015 Ventilation Tubes - Shepherd Titanium, w/o wire 1.00mm, 1.25mm lumenBC016 Ventilation Tubes - Shepherd Titanium with wire 1.00mm, 1.25mm lumenBC017 Ventilation Tubes - Silicone Armstrong Grommet, Donaldson w & 1.1mm & 1.5mm lumen
w/o Tab, Paparella 1 and Paparella 2
Endocorp Pty LtdEC017 Exmoor Plastics Ear Vent Drains - With hole, teflon 1.14 mm lumen dia x 2.54 mm inner
Reuter Bobbin flange dia x 2.54 mm outer flange dia x 0.76 inter flange. 1.52mm total length
EC018 Exmoor Plastics Ear Vent Drains - Without hole, teflon 1.14 mm lumen dia x 2.54 mm inner Reuter Bobbin flange dia x 2.54 mm outer flange dia x
0.76 inter flange. 1.52mm total length
EC019 Exmoor Plastics Ear Vent Drains - Collar Teflon 1.14 mm lumen dia x 2.24 mm inner Button flange dia x 2.24 mm outer flange dia x
1.27 inter flange. 1.78 mm total length
EC020 Exmoor Plastics Ear Vent Drains - Teflon 1.14 mm lumen dia x 3.0 mm inner flangeCollar Button dia x 3.0 mm outer flange dia x 1.27
inter flange. 1.78 mm total length
EC021 Exmoor Plastics Ear Vent Drains - Teflon 1.4 mm lumen dia x 2.55 mm inner flangeCollar Button dia x 2.55 mm outer flange dia x 0.85
inter flange. 1.35 mm total length
PART A - Prostheses List by Category, Groups and Sponsor Page 49 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EC022 Exmoor Plastics Ear Vent Drains - Collar Teflon 1.75 mm lumen dia x 2.85 mm inner Button flange dia x 2.85 mm outer flange dia x
0.95 inter flange. 1.46 mm total length
EC023 Exmoor Plastics Ear Vent Drains - Teflon Shephards Drain with wire 1.14 mm lumen dia x 2.36 mm inner Shepards Drain flange dia x 2.36 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC024 Exmoor Plastics Ear Vent Drains - Teflon Shephards Drain 1.14 mm lumen dia x 2.36 mm inner Shepards Drain flange dia x 2.36 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC025 Exmoor Plastics Ear Vent Drains - Teflon Teflon Shephards Drain with wire 0.97 mm lumen dia x 2.08 mm inner Shephards Drain flange dia x 2.08 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC026 Exmoor Plastics Ear Vent Drains - Teflon Teflon Shephards Drain with wire 0.97 mm lumen dia x 2.08 mm inner Shephards Drain with wire grasping flange dia x 2.08 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC027 Exmoor Plastics Ear Vent Drains - High density polyethylene Shephards 0.97 mm lumen dia x 2.08 mm inner Shephards Drain Drain with tab flange dia x 2.08 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC028 Exmoor Plastics Ear Vent Drains - Silicone rubber Shepards Drain with tab 0.97 mm lumen dia x 2.08 mm inner Shephards Drain - Pack of 25 flange dia x 2.08 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC029 Exmoor Plastics Ear Vent Drains - Burns Titanium 1.35 mm lumen dia x 2.75 mm inner Titanium Grommet flange dia x 2.75 mm outer flange dia x
0.95 inter flange. 1.13 mm total length
EC030 Exmoor Plastics Ear Vent Drains - Silicone rubber 1.1 mm lumen dia x 2.25 mm inner flangeDonaldson Grommet dia x 2.25 mm outer flange dia x 0.76
inter flange. 2.25 mm total length
EC031 Exmoor Plastics Ear Vent Drains - With tab, silicone rubber 1.1 mm lumen dia x 2.25 mm inner flangeDonaldson Grommet dia x 2.25 mm outer flange dia x 0.76
inter flange. 2.25 mm total length
EC032 Exmoor Plastics Ear Vent Drains - Reddy High density polyethylene 1.0 mm lumen dia x 3.3 mm inner flange Grommet dia x 3.0 mm outer flange dia x 1.2 inter
flange. 2.43 mm total length
EC033 Exmoor Plastics Ear Vent Drains - Shah Teflon 0.85 mm lumen dia x 2.3 mm inner flangeMini Grommet dia x 1.92 mm outer flange dia x 1.0
inter flange. 1.52 mm total length
EC034 Exmoor Plastics Ear Vent Drains - Full length, silicone rubber 1.14 mm lumen dia x 8.2 mm inner flangeExmoor T-Tube dia. Outer flange - none. 12.5 mm total
PART A - Prostheses List by Category, Groups and Sponsor Page 50 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EC035 Exmoor Plastics Ear Vent Drains - Reduced length, silicone rubber 1.14 mm lumen dia x 8.2 mm inner flangeExmoor T-Tube dia. Outer flange - none. 6.0 mm total
EC036 Exmoor Plastics Ear Vent Drains - Long wings, silicone rubber 1.14 mm lumen dia x 9.5 mm inner flangeExmoor T- Tube dia. Outer flange - none. 12.5 mm total
EC037 Exmoor Plastics Ear Vent Drains - Tiny Silicone rubber 0.75 mm lumen dia x 7.5 mm inner flangeT-Tube dia. 5.7 mm total length
EC038 Exmoor Plastics Ear Vent Drains - With mirror image flanges, high density 1.0 mm lumen dia x 3.0 mm inner flange Addenbrooke's/Owa Ventilation Tube polyethylene. dia x 3.0 mm outer flange dia x 1.5 inter
flange. 2.0 mm total length
EC039 Exmoor Plastics Ear Vent Drains - Bel- Bell shape, high density polyethylene 1.05 mm lumen dia x 2.95 mm inner Air Ventilation Tube flange dia x 2.95 mm outer flange dia x
1.45 inter flange. 1.65 mm total length
EC040 Exmoor Plastics Ear Vent Drains - Teflon 0.97 mm lumen dia x 2.34 mm inner Cylindrical Ventilation Tube flange dia. Outer flange - none. 7.11
mm total length
EC041 Exmoor Plastics Ear Vent Drains - Teflon 1.14 mm lumen dia x 2.45 mm inner Cylindrical Ventilation Tube flange dia. Outer flange - none. 7.11
mm total length
EC042 Exmoor Plastics Ear Vent Drains - Shah With wire, teflon 1.14 mm lumen dia x 3.61 mm inner Ventilation Tube flange dia x 2.59 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC043 Exmoor Plastics Ear Vent Drains - Shah Teflon 1.14 mm lumen dia x 3.61 mm inner Ventilation Tube flange dia x 2.59 mm outer flange dia x
1.42 inter flange. 2.41 mm total length
EC044 Exmoor Plastics Ear Vent Drains - Shah Bevelled flange, silicone rubber 1.14 mm lumen dia x 5.2 mm inner flangePermavent dia. Outer flange - none. 6.0 mm total
Enta Surgical Pty LtdES001 Trocar Myringotomy Tube Myringotomy Tube with Trocar - Gold One Size Only
Coated Silver; Myringotomy Tube with Trocar - Titanium; Myringotomy Tube with Trocar, with wire - Gold Coated Silver; Myringotomy Tube with Trocar, with wire - Titanium
Global Scientific Pty LtdGS071 Ventilation Tube Shepard grommet, fluoroplastic or 1.02 -1.14mm
silicon, vent tube w/wire.
GS072 Ventilation Tube Shepard, fluoroplastic, w/Tab & wire 1.02 -1.14mm
PART A - Prostheses List by Category, Groups and Sponsor Page 51 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GS073 Ventilation Tube Shepard, Ultrasil Silicon & Blue Poly 1.02 - 1.14mmGS074 Ventilation Tube Lindeman-Silverstein - Fluorplastic One size onlyGS075 Ventilation Tube Moretz (angled Spoon Bobbin style), One size only
Fluoroplastic
GS076 Ventilation Tube Moretz (angled Spoon Bobbin Style) One size onlyGS077 Ventilation Tube Grommet - Pope - Fluorplastic One size onlyGS078 Ventilation Tube Rock Paediatric - Fluorplastic One size onlyGS079 Ventilation Tube T-Tube Richards Silicon, Soft Silicon, 1.14mmGS080 Ventilation Tube T-Tube Richards Modified Silicon & 1.32mmGS081 Ventilation Tube T-Tube Richards Modified Soft Silicon 1.32mmGS082 Ventilation Tube Butterfly T-Tube Silicon & Ultrasil Silicon - one size only. Ultrasil - one size
only.
GS083 Ventilation Tube Micron Plus - Titanium One size onlyGS084 Ventilation Tube Armstrong Beveled Grommet Ultrasil 1.14mm
Silicon w/Tab
GS085 Ventilation Tube Grommet - Sha Mini. Teflon 0.76mmGS086 Ventilation Tube Shah. Teflon, Silicon 5.1mmGS087 Ventilation Tube Shah. Teflon, Fluorplastic w/Wire 1.14mmGS088 Ventilation Tube Shah. Teflon, Fluorplastic without Wire 1.14mmGS089 Ventilation Tube Armstrong Beveled Plain End One size onlyGS090 Ventilation Tube Armstrong Beveled Plain End Silcon One size onlyGS091 Ventilation Tube Bobbin - Reuter Stainless Steel 1mm GS092 Ventilation Tube Bobbin - Reuter Stainless Steel Without Wire 1.14-1.27mm, w/wire 1mmGS093 Ventilation Tube Bobbin - Reuter Fluoroplastic 1mm I.F 1mm
Without Holes
GS094 Ventilation Tube Bobbin - Reuter Fluoroplastic 1mm I.F 1.14mmWithout Holes
GS095 Ventilation Tube Bobbin - Reuter Fluoroplastic 1mm I.F 1.14mmGS096 Ventilation Tube Bobbin - Reuter Fluoroplastic 1mm I.F 1.14mmGS097 Ventilation Tube Bobbin - Reuter Fluoroplastic 0.5mm I.F 1.27mm
PART A - Prostheses List by Category, Groups and Sponsor Page 52 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GS098 Ventilation Tube Bobbin Micron Titanium 1.14mmGS099 Ventilation Tube Bobbin Spoon 'V' - Titanium One size onlyGS100 Ventilation Tube Collar Bobbin Fluoroplastic 1.27mmGS101 Ventilation Tube Collar Bobbin Fluoroplastic 0.75mmGS102 Ventilation Tube Collar Bobbin Fluoroplastic 1.14mmGS103 Ventilation Tube Collar Bobbin Fluoroplastic 1.27x0.5mmGS104 Ventilation Tube Collar Button Ultrasil Silicon 1.27mmGS105 Ventilation Tube Collar Button Fluoroplastic Blue 1.27mmGS106 Ventilation Tube Collar Button Fluoroplastic w/Wire 1.27mmGS107 Ventilation Tube Collar Button Silicon 1.27mmGS108 Ventilation Tube Collar Button Titanium 1.14mmGS109 Ventilation Tube Collar Button Titanium 1.27mmGS110 Ventilation Tube Donaldson Silicon 1.14mmGS111 Ventilation Tube Donaldson Soft Silicon 1.14mmGS112 Ventilation Tube Donaldson Silicon w/Tab 1.14mmGS113 Ventilation Tube Donaldson Fluoroplastic 1.14mmGS114 Ventilation Tube Donaldson Ultrasil Silicon 1.14mmGS115 Ventilation Tube Duravent Silicon 1.27mmGS116 Ventilation Tube Duravent Blue Ultrasil 1.27mmGS117 Ventilation Tube Paparella w/tab Fluoroplastic, Silicon, 1.02 - 2.03mm
Soft Silicon, Ultrasil
GS118 Ventilation Tube Per-Lee - Silicone One size onlyGS119 Ventilation Tube Shea w/Tab - Silicone 0.76mmGS120 Ventilation Tube Shea Parasol w/Tab Small Flange - 1.02mmGS121 Ventilation Tube Shea Parasol w/Tab - Silicone 1.02mmGS122 Ventilation Tube Shea Parasol w/Tab - Silicone 1.52mmGS123 Ventilation Tube Straight Fluoroplastic or Polyethylene 0.89 x 12mm, 0.86 x 7mm, 1.14 x
12mm, 1.14 x 7mm
GS128 Venturi Plus Ventilation Tube Hydromer coated titanium 1.27mm ID
PART A - Prostheses List by Category, Groups and Sponsor Page 53 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GS129 Jahn Ventilation Tube Hydroxyapetite, or HA with fluoroplastic 9mm length, 1-1.27mm diameterGS130 Canale Ventilation Tube Silicone 1.14mmGS132 Rube Ventilation Tubes Silicone 1.14mm ID
Med-Chem Pty LtdML001 Aero-Tymp Ventilation Tubes Bevel Bobbin Ventilation Tube PE (Poly 1.15mm ID, 1.10mm ID, 1.25mm ID,
Ethylene);Reuter Bobbin Ventilation Tube 1.14mm IDPTFE (Poly Tetra Fluoro Ethylene);Sheehy Type Collar Button PE (Poly Ethylene);Shepard Ventilation Tube PE (Poly Ethylene), Bx/10
ML002 Aero-Tymp Ventilation Tubes Sterile - Donaldson Silicone Ventilation 1.10mmTube; Armstrong Bevelled Ventilation Tube PE (Poly Ehtylene); Bx/10
ML003 Aero-Tymp Ventilation Tubes Sterile - Goode T Tube Silicone; Goode T 1.3mm ID x 12.0mm long, 1.3mm ID x Tube Silicone; Bx/10 6.0mm long
Medtronic Australasia Pty LtdMC268 Activent Antimicrobial Ventilation Tube Silicone, Silver Oxide, Fluroplastic 0.76 - 1.52mm x 2.1 - 9.5mm x 1.0 - MC269 Activent Antimicrobial Ventilation Tube Silicone, Silver Oxide, Fluroplastic 1.02 - 1.27mm x 0.9 - 2.4mmMC270 Activent Antimicrobial Ventilation Tube Silicone & Silver Oxide. Sheehy 1.27 x 2.9 x 1.3mmMC271 Vent Tube Silicone, Fluroplastic, Titanium, SS 1.02 - 1.27mm, 1.58 - 2.7mmMC272 Vent Tube Silicone, Fluroplastic 1.02 - 1.52mm x 0.9 - 4.45mmMC273 Vent Tube Silcone Fluroplastic 1.02 - 1.27mm x 1.3 - 3.0mmMC274 Vent Tube Titanium, Fluroplastic 1.02 - 1.27mm x 1.0 - 3.5mmMC275 Vent Tube Fluroplastic, Silicone 1.14 - 1.27mm x 0.9 - 3.0mmMC276 Vent Tube Silicone, Fluroplastic, H/C Flex 0.76 - 1.27mm x 1.0 - 7.5mmMC277 Vent Tube Silicone, Fluroplastic, C-Flex 0.89 - 1.52mm x 2.3 - 12.0mmMC278 Vent Tube Silicone, Fluroplastic 0.76 - 1.27mm x 1.5 - 12.0mmMC279 Vent Tube Microgel, Titanium, SS 1.02 - 1.27mm x 2.7 - 9.1mmMC280 Vent Tube Silicone, Fluroplastic 1.02 - 1.52mm x 1.3 - 12.0mm
PART A - Prostheses List by Category, Groups and Sponsor Page 54 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Morton Surgical Pty LtdMG003 Micromedics Ventilation Tubes Micromedics;Shepard;1.0mm / 1.14mm
lumen;Fluroplastic / Silicone;w.tab / w.wire;box of 6 / box of 50
MG011 Micromedics Ventilation Tubes Micromedics; Donaldson; 1.14mm lumen; Silicone / Fluroplastic; w.tab; box of 6 / box 50
MG012 Micromedics Ventilation Tubes Micromedics; Paparella-I / Paparella-II; 1.14mm / 1.42mm lumen; Silicone; box of 6 / box of 50
MG013 Micromedics Ventilation Tubes Micromedics; T-tubes; (12x10)/(5x8)/(5x4)/(8x5.5); 1.14mm / 1.27mm / 1.4mm lumen ; silicone; box of 6 / box of 50;
MG014 Micromedics Ventilation Tubes Micromedics; Armstrong; bevelled straight / grommit / w.wire; 7mm / 7.5mm / 1.14mm; silicone / fluroplastic;
MG015 Micromedics Ventilation Tubes Micromedics; Collar Button; 1.27mm lumen; fluroplastic; box of 6 / box of 50
MG016 Micromedics Ventilation Tubes Micromedics;Reuter Bobbin;1.0mm / 1.14mm lumen; fluroplastic; box of 6 / box of 50
MG017 Micromedics Ventilation Tubes Micromedics; Shah with wire; mini 0.76mm lumen; fluroplastic; box of 6 /
Precise Medical SuppliesPR001 Medasil Teflon Aural Grommets Teflon grommets Shepard with wirePR002 Medasil Teflon Aural Grommets Teflon grommets Shepard without wirePR003 Medasil Teflon Aural Grommets Teflon grommets Shah with wirePR004 Medasil Teflon Aural Grommets Teflon grommets Shah without wirePR005 Medasil Teflon Aural Grommets Teflon grommets Collar buttonPR006 Medasil Teflon Aural Grommets Teflon grommets Reuter bobbin
PART A - Prostheses List by Category, Groups and Sponsor Page 55 of 666
EAR, NOSE & THROAT Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tubing
Pacific MedicalPM102 Tracheal Cannula System Short and long term Cannula (Medical Diameter 9-13mm; Length 37m &
Grade Silicone)
PM103 Tracheal Cannula System Cannula Speaking Valves (Medical Grade 4-10 Only able to be claimed Plastic) once for the intial
PM104 Montgomery Safe-T-Tube Paediatric, Standard, Thoracic, Extra- Paediatric/Standard - Clear/RadioplaqueLong, Tapered and Hebeler in clear and
PM106 Montgomery Safe-T-Tube Paediatric, Standard, Thoracic, Extra- ID 8/10, 10/13, 12, 15, 18mm; Length Long, Tapered, Hebeler and HMS, in 76, 77, 79, 159, 163mmclear and radiopaque
PM115 Montgomery Safe-T-Tube Paediatric, Standard, Thoracic, Extra- ID 7, 9, 11mm; Length 100, 110mmLong, Tapered, Hebeler and HMS
PART A - Prostheses List by Category, Groups and Sponsor Page 56 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Accessories, Endoscopes
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS045 STAT TACK* and Endoscopic Tacker Endoscopic TACKER*; Titanium; 20 tacks; 30 tacks; 5mm; 4mm, 4.8mm Temporary Approval
Device; PROTACK* Hernia Stapling Titanium Surgical Stapler. (10 staples).Product; ENDO UNIVERSAL*
AS073 ENDOCLIP*; Acuclip Single use Titanium Surgical Stapler 5mm (12 clips); One size only. Temporary ApprovalEndoscopic Multiple Clip Applier.
AS074 ENDOCLIP* Titanium Surgical Stapler 10mm (ML, M, L)-(20 clips) Temporary Approval
Linvatec AustraliaLV076 Richard Allan Endoscopic Accessories Titanium endoscopic clips with applier Medium-Large, 9mm closed. 20 clips Temporary ApprovalLV079 Articulator 35 Articulating Stapler/Cutter Dual triple staggered rows of 54 titanium 33mm cut length, 37mm staple line (2 x Temporary approval
staples triple rows of staples), Regular or Short shaft, 1.5 or 2.5mm staple.
LV080 Articulator 35 Cartridge Dual triple staggered rows of 54 titanium 33mm cut length, 37mm staple line (2 x Temporary approvalstaples triple rows of staples), Regular or Short
shaft, 1.5 or 2.5mm staple.
LV081 Open Clip Applier Titanium 25 medium size titanium clips Temporary approval
Olympus AustraliaOL001 Individual Ligating Clip Rotatable Clip Fixing Device. Pack of 50 MD-59 - 90 degree, standard; MD-850 - Temporary Approval
135 degree, standard; HX-600-090 - standard, sterile; HX-600-135 - standard,
OL002 Individual Ligating Clip Rotatable Clip Fixing Device. Pack of 50 MH-858 - 90 degree, long. MH-859 - 90 Temporary Approvaldegree, short. MAJ-458 - 90 degree, short. MAJ-459 -135 degree, short.
OL006 Individual Ligating Clip Ligating Device - loops. Pack of 10 MAJ-254-30mm loop; MAJ-339- 13mm Temporary Approvalloop; MAJ-340 -20 mm loop
Anchor, Fixation
William A Cook Aust Pty LtdWC014 Cope Gastrointestinal Suture Anchor Set Standard, pediatric
(GIAS)
PART A - Prostheses List by Category, Groups and Sponsor Page 57 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheterization Kits, Central Venous
William A Cook Aust Pty LtdWC195 Cook Central Venous Catheterisation Kits Long Term Drug Infusion Catheter With Triple Lumen 12.5fr
or Without Clamp and Cuff
Clip Appliers
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS001 Endoclip Disposable Loading Unit; Single use loading unit with 8 titanium One size only Temporary Approval
MultApplier Disposable loading unit. clips; Disposable clip cartridge with 8
Monarch MedicalMH008 Applied Medical Laparoscopic Clip Disposable Clip Applier made from Medium - large - 20 clips per device Temporary Approval,
Applier - Disposable Cartridge - CA001 polycarbonate, nylon, stainless steel, pending review of liquid crystal polymer, bone wax, titanium product group clip. The disposable cartridge is used in conjunction with a reuseable handle.
MH009 Applied Medical Laparoscopic Clip Disposable Clip Applier made from Medium - large, 20 clips per device Temporary Approval, Applier - Disposable CA080 Box of 6 polycarbonate, nylon, stainless steel, pending review of
liquid crystal polymer, bone wax, titanium product group
Clips
William A Cook Aust Pty LtdWC213 Endoscopic Clipping Device TriClip Endoscopic Clipping Device 7Fr - 3 Prong 12mm, 8Fr - 3 prong
Clips, Vascular
Monarch MedicalMH001 Clips Haemostatic Clips 10-mm, 14 med/lrg Temporary approvalMH004 Applied TiGold Laparoscopic Disposable Polypropylene, stainless steel, titanium 11 mm, 14 med/lrg clips Temporary approval
Multifire Clip Applier
PART A - Prostheses List by Category, Groups and Sponsor Page 58 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Device Kits With Drugs
Boston Scientific Pty LtdBS064 Enteryx Procedure Kit Enteryx is supplied as a kit that is made Solution 10ml, DMSO 10ml, syringes 1ml
up of Enteryx solution, DMSO (dimethyl (2), needles 18 gauge x 1 1/2sulfoxide) a primer solution, Enteryx injection catheters, syringes and needles
Enteral Feeding Kits
Nutricia AustraliaNF002 Flocare Percutaneous Endoscopic The Flocare PEG set is for endoscopic various sizes - charriere 10, 14 and 18
gastrostomy (PEG) set placement of a gastrostomy tube, based on the "Pull" technique.
Fixation Device
Johnson & Johnson Medical Pty LtdJJ435 EndoANCHOR EndoANCHOR System with Nitinal Device Length 482; Device Shaft Length
360mm; Shaft Diameter 5mm; Implantable Construct Width 6.7mm, Implantable Construct length 5.9mm
Prostheses, Bile Duct
William A Cook Aust Pty LtdWC166 Cook Bile Duct Prostheses Solus Double Pigtail Stent Set with 10 fr, Length: 3, 4, 5, 7, 9, 10, 12, 15 cm
PART A - Prostheses List by Category, Groups and Sponsor Page 59 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Gastroesophageal Antireflux
Incision Pty LtdIP005 Durasphere GR Composition: Pyrolitically carbon coated Syringe 1 ml
silica bead in an aqueous gel. Injectable bulking agent for the treatment of GERD (Reflux Disease). Syringe plus needle.
IP006 Durasphere GR Composition: Pyrolitically carbon coated Syringe 3mlsilica bead in an aqueous gel. Injectable bulking agent for the treatment of GERD (Reflux disease). Syringe plus needle.
Prosthesis, Internal, Stent
Medtel Australia Pty LtdME124 Emphasys Endobronchial Valve One way valve Small, Medium, Large
Prosthesis, Internal, Stent, Pancreatic
William A Cook Aust Pty LtdWC212 Pancreatic Stent Sets Zimmon Pancreatic Stent without Ductal 3Fr -4,6,8,10,12cm
Flap, Pigtail with Radiopaque Band
Staples, Tissue
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS046 Endo GIA* Universal Stapling System; Multifire 30 disposable stapler with 12mm; One size only. Temporary Approval
Versafire GIA*. titanium staples; Disposable surgical stapling instruments or cartridges.
AS076 ENDO TA* reloading unit Titanium Surgical Stapler DLU 30mm -2.5, 30mm-3.5 Temporary ApprovalAS077 ENDO GIA* Titanium Surgical Stapler 30 - 35mm Temporary ApprovalAS081 ENDO GIA* reloading unit Titanium Surgical Stapler DLU 30 - 35mm; 45mm; 60mm. Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 60 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AS092 ENDO - Herna reloading unit; VERSA Titanium Surgical Stapler DLU 4mm, 4.8mm (10 staples). Temporary ApprovalTACK* reloading unit.
AS095 STAT TACK* and Endoscopic Tacker STAT TACK* One size only Temporary ApprovalDevice
Stents
Boston Scientific Pty LtdBS071 Ultraflex Precision Colonic Stent System The Ultraflex Precision Colonic Stent Dia 25mm along body and 30mm at
System consists of a self-expanding metal flared distal section. Stent Length 60 - stent and a delivery catheter.
Stents, Biliary
Bard Australia Pty LtdBA124 Memotherm Biliary Stent Nitinol. Includes deployment system Sizes - Diameter 8 - 10mm, Length 40 -
100mm
Boston Scientific Pty LtdBS066 Biliary Drainage Stent, Amsterdam Biliary The Biliary Stent is supplied with a push French Size 7Fr to 12Fr, Length between
Stent catheter and possibly a guide catheter. pigtails/barbs: 5cm to 15cm
BS070 Wallstent RX Biliary Endoprosthesis with Self-expanding metal stent constructed Diameter: Up to 10mm, Stent Length: Up Unistep Plus delivery System from a biomedical Cobalt-based super to 100mm
alloy wire, Eligiloy, with a tantalum core. The stent is either bare or covered with silicone. The stent is mounted on a
William A Cook Aust Pty LtdWC174 Zilver Stent Expandable Metal Biliary Diameters: 6, 8, 10cm; Lengths: 4,6,8cm
Stent System
WC200 Zilver Stent Expandable Metal Biliary Zilver Biliary Stent with Fusion 6mm, 8mm & 10mm; Cm length: 4cm, Stent System Introducer System 6cm & 8cm
PART A - Prostheses List by Category, Groups and Sponsor Page 61 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stents, Esophageal
Endotherapeutics Pty LtdET035 Sinus-Esophageal Stent Self expanding stent made of nickel - Diameter 24-18-24mm, length
titanium alloy 50,70,90,120mm; Diameter 26-20-26, length 50,70,90,120mm
ET045 Boubella Esophageal Stent Self expandable stainless steel wire stent Length 90 - 195mmwith anti-reflux valve
William A Cook Aust Pty LtdWC144 Cook Gianturco-Rosch Covered Stent and Introducer Medial Diam 17mm, Distal Diam 25mm
Esophageal Z-Stent Extension
Stents, Pancreatic
William A Cook Aust Pty LtdWC194 Johlin Pancreatic Wedge Stent with Johlin Pancreatic Stent 8.5 and 10fr, 8cm - 16cm
Wedge Stent Introduction
Stents, Vascular
Endotherapeutics Pty LtdET038 SX-Ella Biliary Stent Uncovered, self-expanding nitinol stent Dia 8-12mm, length 50-77mmET039 SX-Ella Tips Stent Uncovered, self-expanding nitinol stent Dia 10-14mm, length 52-77mm
PART A - Prostheses List by Category, Groups and Sponsor Page 62 of 666
ENDOSCOPIC PRODUCTS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tubes, Gastrostomy, Other
Nutricia AustraliaNF001 Flocare Gastrostomy tube (G-tube) The Flocare Gastrostomy tube can be Ch10, 14, 18, 20
used as a replacement of an existing gastrostomy tube (PEG or G-tube) or as an initial gastrostomy tube during a surgical intervention. This balloon tube is made of Carbothane, which ensures a longer life than tubing made of PUR or
PART A - Prostheses List by Category, Groups and Sponsor Page 63 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Adhesives, Aerosol
Medical Vision Australia Pty LtdMF003 Steritalc Sterile granules of talc implanted in 3 grams & 4 grams
pleural space to act as permanent
Technology For Life Pty LtdTE002 Sclerosol Pleural Spray Intrapleural Patch 5gm
Adhesives, Liquid
Baxter Healthcare Pty LtdBX252 CoSeal Surgical Sealant Composition: two synthetic polyethelene 2ml Temporary approval,
glycols (PEG's), COH102 and COH206, pending review of premixed and filled into one syringe, a product groupdilute hydrogen chloride solution and a sodium phosphate/sodium carbonate
BX253 CoSeal Surgical Sealant Composition: two synthetic polyethelene 4ml Temporary approval, glycols (PEG's), COH102 and COH206, pending review of premixed and filled into a syringe, a dilute product group+ hydrogen chloride solution and a sodium phosphate sodium carbonate solution
BX254 CoSeal Surgical Sealant Composition: two synthetic polyethelene 8ml Temporary approval, glycols (PEG's), COH102 and COH206, pending review of premixed and filled into a syringe, a dilute product group+ hydrogen chloride solution and a sodium phosphate sodium carbonate solution
Device Technologies Australia Pty LtdDE161 Advaseal Synthetic Absorbable Sealant Synthetic bioabsorbable Surgical Sealant One Size Only
Anesthesia Kits, Other
Ultimate Medical Pty LtdUM001 LA Bubble Balloon based local anaesthetic infusion One size only
system
PART A - Prostheses List by Category, Groups and Sponsor Page 64 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Appliers
N Stenning & Co Pty LtdNG042 Weck Hem-o-lok Hem-o-lok Automatic Open Applier 15 Clips per applier Temporary approvalNG043 Weck Hem-o-lok Hem-o-lok Automatic Endo Applier 15 Clips per applier Temporary approval
Balloons, Gastric, Appetite-Suppressing
Morton Surgical Pty LtdMG002 Heliogast Adjustable Gastric Ring Silicone and Titanium HAGM (medium) Inner Diameter
27.5mm; HAGS (small) Inner Diameter 25mm; HAGA (advanced) Inner Diameter
Barrier Dressing, Antiadhesion
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS065 CV Seprafilm Cardiovascular Adhesion Sodium hyaluronate carbomethylcellulose One size only; 6 x 6 inch. Temporary Approval -
Barrier; Seprafilm II. membrane; Carbomethycellulose. Funded when clinical indications for use are present.
Brachytherapy Sources
Amersham Health Pty LimitedAH001 Iodine 125 - 'Rapid Strand' Brachytherapy Rapid Strand consists of 10 welded One size each Only to be funded
Implant, Iodine 125 - 'OncoSeeds' titanium capsules containing iodine-125 where used in a service Brachytherapy Implant absorbed onto a silver rod. OncoSeeds for which a medicare
consists of the loose seeds only. benefit is payable (current MBS items are
PART A - Prostheses List by Category, Groups and Sponsor Page 65 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AH002 Iodine 125 - Rapid Strand Brachytherapy I-125 Rapid Strand, code IMC 7000, One size only Only to be funded Implant; OncoSeeds Brachytherapy consists of 10 welded titanium capsules where used in a service
containing iodine 125. This assembly is for which a medicare sterile, the acitivity of the capsules benefit is payable "seeds" is available from 0.18mCi to (current MBS items are 0.70mCi. Individual I-125 capsules (seeds) are also available as OncoSeeds IMC6711. To be used only if more than
Nucletron Pty. LimitedNU001 selectSeed Nucletron selectSeed Model # 130002 One size only Only to be funded
consists of cylindrical silver rod, coated where used in a service with radioactive Iodine-125 layer. Active for which a medicare silver rod is encapsulated in hollow benefit is payable titanium tube. Laser welding, using (current MBS items are sperical shaped end welds, seals the tube.
Catheter Injection Ports
Cecil E Mayo Pty LtdCM006 Vascular Ports Arrow Model No. AP01002, Titanium Ports - H15.5mm x L28.6mm, Weight
Port with self sealing silicone septum and 9.2grams, Internal Vol. 0.8ml. Catheter polyurethane detachable catheter with Blue Flex Tip
CM007 Vascular Ports Arrow Model No.'s VARRX AP01004, Ports - H15.5mm x L28.6mm, Weight AP01005, AP01006, AP01007, AP01008, 9.2grams, Internal Vol. 0.8ml. Catheter AP01009, AP01510, AP06010, AP06013, AP06014, AP06015, AP06018, AP06520. Titanium Port with self sealing silicone septum and either attached or detached silicone catheters
CM008 Vascular Ports Arrow Model No.'s AP01515, AP01516, Ports - H15.5/17.1mm x L28.6mm, AP01517, AP01518, AP02001, AP06527, Weight 19.9grams, Internal Vol. 0.8 - AP6528, AP06530, AP06535, AP07018. 1.0ml each side. Catheters 75cm Double Titanium ports with self sealing silicone septums and either attached or detached dual lumen silicone catheters.
PART A - Prostheses List by Category, Groups and Sponsor Page 66 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheterization Kits
Cecil E Mayo Pty LtdCM005 Intraspinal Catheter Kit Arrow Model No. VARRX AP07009, Intraspinal Catheter - 19Ga x 75cm,
FlexTip Plus Intraspinal Catheter Kit. Tuohy Needle 9.8cm 17GaPolyurethane with Titanium Coil Catheter with stylet, One Titanium Catheter Connector, One Plastic Snap Lock Adapter, One Stainless Steel Tuohy Needle, One plastic catheter anchor.
Medtronic Australasia Pty LtdMC070 Medtronic AlgoLIne Catheter System Model 81104. Radiopaque silicone 85cm
Catheterization Kits, Central Venous
Cecil E Mayo Pty LtdCM014 Catheterisation Kits- CS Series Arrow Model No.'s VARRM CS18703, 7Fr x 35cm & 40cm
CS28702. Polyurethane double and triple lumen catheters with dacron cuff.
Medical Specialties Australia Pty LtdMS008 Catheterisation kits(Horizon Medical) Central Venous Catheter - Apheresis Bone 12.5F
Marrow Transplantation Catheter, silicone
MS009 Catheterisation kits(Horizon Medical) Central Venous Catheter - right atrial 2.7 -14Fcatheter, silicone
MS010 Catheterisation kits(HDC corp) Central Venous Catheter - right atrial 2 - 12Fcatheter, silicone
Catheterization Kits, Intravenous
Bard Australia Pty LtdBA125 Groshong Catheter Groshong Valved - Closed ended Single Lumen, sizes 3fr-8fr
catheter, may also include Introducer, guidewire, tunneller, drape, gloves, needles, scissors, syringes, gauze pads
PART A - Prostheses List by Category, Groups and Sponsor Page 67 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA126 Groshong Catheter Groshong Valved - Closed ended Dual Lumen, sizes 5fr-9.5frcatheter, may also include Introducer, guidewire, tunneller, drape, gloves, needles, scissors, syringes, gauze pads
Cecil E Mayo Pty LtdCM011 Arrow Peripherally Inserted Central Model No.'s VARRC PC01351. 3Fr x 55cm
Catheterisation Sets Polyurethane single lumen catheters with stylet.
CM012 Arrow Peripherally Inserted Central Model No.'s VARRC PC01451, PR05041, 4Fr x 55cmCatheterisation Sets Polyurethane single lumen catheters with
or without stylet.
CM013 Arrow Peripherally Inserted Central Model No.'s VARRC PC01552, PR05052, 5Fr x 55cm & 70cmCatheterisation Sets PR07051 Polyurethane single and double
lumen catheters with or without stylet.
Medtronic Australasia Pty LtdMC064 Implantable Drug Pump Accessories 8590-8, 8590-9 - Synchromed catheter 20cm; one size only; 38-60cm
accessory kit - Radiopaque silicone, 8590RAC - Right angled connector - Titanium, polyurethane, 8591-38, 8691-60, 8590-41 Tunnelling rods - Stainless Steel, 8575 Synchromed connector (40 degree) with catheter access port, 8577 Isomed connector (90 degree) without catheter access port, Right Angle Connectors - Models 8575 40 Deg, Model 8577 90 Deg;
Catheters, Biliary
William A Cook Aust Pty LtdWC071 Nasobiliary Drainage Set Biliary/Pancreatic DRAINAGE CATHETER Fr size:
5,6,7,8.5 Length: 250cm Sideports: 5cm WIRE GUIDE Diameter: .035 inch Length: 480cm Color Connection purple
PART A - Prostheses List by Category, Groups and Sponsor Page 68 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Central Venous, Long Term
Medtronic Australasia Pty LtdMC068 Medtronic SynchroMed vascular catheter Model 8700, 8700A, 8710. Radiopaque 62 to 89cm
silicone
William A Cook Aust Pty LtdWC116 Cook Central Venous Long Term Cook TPN single lumen catheter Fr 3, length 55, 65cm; Fr 4, length 65cm,
Fr 6.5, 9.5, length 90cm
WC117 Cook Central Venous Long Term Cook TPN single lumen catheter set Fr 3, length 55; Fr 4, length 65cm, Fr 6.5 length 65, 90cm, Fr 9.5, length 90cm
WC118 Cook Central Venous Long Term Cook TPN double lumen catheter Fr 5, length special; Fr 7, length 65cm, Fr 9 length 80, 90cm, Fr 12, length
WC119 Cook Central Venous Long Term Cook TPN double lumen catheter set Fr 7, length 65cm, Fr 9 length 90cm, Fr 12, 90, special
WC121 Cook Central Venous Long Term Cook TPN triple lumen catheter Fr 8, length 90cmWC122 Cook Central Venous Long Term Cook TPN triple lumen catheter set Fr 8, length 90cm
Catheters, Cerebrospinal
Medtronic Australasia Pty LtdMC057 Spinal Catheter Model 8703W Radiopaque Silicone 2 sections for each catheter. Length of
sections: 38cm distal, 66cm proximal
Catheters, Epidural
Smiths Medical Australasia Pty LtdSI020 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.2 mm O.D. polyurethane catheter
A-CATH II Epidural Low Profile System
SI021 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 0.9 mm O.D. polyurethane catheterA-CATH II Intraspinal Low Profile
PART A - Prostheses List by Category, Groups and Sponsor Page 69 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Intravenous, Peripheral
Bard Australia Pty LtdBA129 Vascular Catheter PICC - may include a Groshong Valved - Single Lumen 3Fr - 6Fr
Closed ended PICC, may also include, Introducer, guidewire, tunneller, drape, gloves, needles, scissors, syringes, gauze
BA130 Vascular Catheter PICC- may include a Groshong Valved - Dual Lumen 4Fr - 7FrClosed ended PICC, may include, Introducer, guidewire, tunneller, drape, gloves, needles, scissors, syringes, gauze
Catheters, Irrigation
William A Cook Aust Pty LtdWC196 Cook Irrigation Catheter Chait Percutaneous Cecostomy Set 10fr, Set
consisting of: Suture Anchor Set, Drainage Catheter, Wireguide, Cecostomy Catheter Set, Adapter, Connecting Tube
WC197 Cook Irrigation Catheter Chait Percutaneous Cecostomy Catheter 10fr, Standard or Extra Long
Catheters, Jejunostomy
William A Cook Aust Pty LtdWC098 Cook Jejeunostomy Catheters Composition - Catheter Radiopaque 12fr, length 66cm
Stripe, includes Wireguide, Airplug,
WC099 Cook Jejunostomy Catheters Composition - Catheter Radiopaque 9fr, Length 24cmStripe, includes Wireguide, Airplug,
WC198 Cook Jejunostomy Catheters Heidelberg Jejunostomy Catheter 12fr, 60cm
PART A - Prostheses List by Category, Groups and Sponsor Page 70 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Peritoneal Dialysis
Kendall Australasia Pty Ltd T/A Tyco Healthcare Pty LtdKA001 Tenckhoff Peritoneal Dialysis Catheter Adult 2 cuff, Adult 1 cuff, Adult 0 Cuff 42cm to 47cm length. All Peritoneal
Catheters excluding the Swan Neck Fast Flow Catheter, have an internal diameter of 2.67mm and an external diameter of
KA002 Tenckhoff Peritoneal Dialysis Catheter Paediatric 2 cuff, Paediatric 1 cuff, 31cm to 37 cm length. All Peritoneal Neonatal 1 cuff Catheters excluding the Swan Neck Fast
Flow Catheter, have an internal diameter of 2.67mm and an external diameter of
KA003 Fast Flow Peritoneal Dialysis Catheter Swan Neck, 2 cuff Int.diam: 3.2mm; ext diam 5.49mm.All Peritoneal Catheters excluding the Swan Neck Fast Flow Catheter, have an internal diameter of 2.67mm and an external diameter of 4.95 mm.
KA004 Swan Neck Curl Peritoneal Dialysis Adult 2 cuff, left 62 cm length. All Peritoneal Catheters excluding the Swan Neck Fast Flow Catheter, have an internal diameter of 2.67mm and an external diameter of 4.95
KA005 Swan Neck or Swan neck Tenckhoff Adult-left, Adult-right, Adult, 2 cuff-left, 20 to 25cm external segment or 43cm Peritoneal Dialysis Catheter Adult, 2 cuff-right length. All Peritoneal Catheters excluding
the Swan Neck Fast Flow Catheter, have an internal diameter of 2.67mm and an external diameter of 4.95 mm.
KA006 Tenckhoff Peritoneal Dialysis Catheter, Adult, 2 cuffs 57 to 62cm length. All Peritoneal Catheters excluding the Swan Neck Fast Flow Catheter, have an internal diameter of 2.67mm and an external diameter of
Catheters, Peritoneal, Long Term Indwelling
Bard Australia Pty LtdBA048 VitaCuff, Broviac Catheters Silicone, with VitaCuff 2.4 - 6.6 French CatheterBA049 Broviac Catheters Without VitaCuff, silicone 2.4 - 6.6 French Catheter
PART A - Prostheses List by Category, Groups and Sponsor Page 71 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA050 Hickman Catheters Single Without VitaCuff, silicone 7 - 14.4F French CatheterBA051 Hickman Catheters Dual Without VitaCuff, silicone 7 - 9 French CatheterBA052 Hickman Catheters Triple Without VitaCuff, silicone 13.5 French CatheterBA053 Vitacuff, Hickman Single Lumen Catheters Silicone, with VitaCuff 7 - 14.4F French CatheterBA054 Vitacuff, Hickman Dual Lumen Catheters Silicone, with VitaCuff 7 - 9 French CatheterBA055 Vitacuff, Hickman Triple Catheters Silicone, with VitaCuff 13.5 French Catheter
Clips, Hemostatic
N Stenning & Co Pty LtdNG025 Hem-o-Lok Polymer Non-Absorbable Hem-o-lok Medium (M), Medium-Large Medium, Medium-Large, Large Temporary Approval
Ligating Clip (ML) and Large (L) Polymer Clips
NG044 Hem-o-lok Polymer Non-Absorbable Hem-o-lok Extra-large (XL) Polymer Extra-large (XL)Ligating Clip
Clips, Ligating
LMT Surgical Pty LtdLM042 Synovis Microclip Malleable titanium clip One size only Temporary approval,
pending review of product group
N Stenning & Co Pty LtdNG006 Horizon Ligating Clips Ligation Clips Titanium Small (6 per cartridge) Temporary ApprovalNG007 Horizon Ligating Clips Ligation Clips Titanium Small (24 per cartridge) Temporary ApprovalNG008 Horizon Ligating Clips Ligation Clips Titanium Medium (6 per cartridge) Temporary ApprovalNG009 Horizon Ligating Clips Ligation Clips Titanium Medium (24 per cartridge) Temporary ApprovalNG010 Horizon Ligating Clips Ligation Clips Titanium Medium/Large (6 per cartridge) Temporary ApprovalNG011 Horizon Ligating Clips Ligation Clips Titanium Medium/Large (24 per cartridge) Temporary ApprovalNG012 Horizon Ligating Clips Ligation Clips Titanium Large (6 per cartridge) Temporary ApprovalNG013 Horizon Ligating Clips Ligation Clips Titanium Large (24 per cartridge) Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 72 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clips, Other
N Stenning & Co Pty LtdNG014 Hemoclip Titanium Clips Small, Medium (25 per cartridge); Large Temporary Approval
(15 per cartridge)
NG016 Hemoclip Titanium Clips Medium (10 per cartridge) Temporary ApprovalNG017 Hemoclip Titanium Clips Small (10 per cartridge) Temporary ApprovalNG018 Hemoclip Titanium Clips Med-large (10 per cartridge) Temporary ApprovalNG019 Hemoclip Titanium Clips Large (10 per cartridge) Temporary ApprovalNG023 Hemoclip Plus Ligation System Small and Medium 15 small preloaded clips and 20 medium Temporary Approval
preloaded clips
Clips, Tube
Femcare Australia Pty LtdFE003 Filshie Clips - Sterishot With Disposable Applicator One Size Temporary approval,
pending review of product group
Clips, Vascular
N Stenning & Co Pty LtdNG020 EZLoad Ligating Clips Titanium Clip Small (25 per cartridge); Med-Large, Temporary Approval
Large (10 per cartridge)
NG021 EZLoad Ligating Clips Titanium Clip Medium (25 per cartridge) Temporary ApprovalNG022 EZLoad Ligating Clips Titanium Clip Small, Medium (10 per cartridge) Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 73 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Delivery Kits
Surgical Synergies Pty LtdSS001 PainBuster Kit includes catheter, introducer needle, 270ml volume x 2 lines x 2 ml per hour
flow restrictor, filter
SS002 PainBuster Kit includes catheter, introducer needle, 100ml volume x 2 ml per hourflow restrictor, filter
SS003 PainBuster Kit includes catheter, introducer needle, 270ml volume x 2 ml per hourflow restrictor, filter
SS004 PainBuster Kit includes catheter, introducer needle, 270ml volume x 5 ml per hourflow restrictor, filter
SS005 Painbuster Soaker Kit includes catheter, introducer needle, 270ml volume x 4ml/hr, dual; 2ml per flow restrictor, filter site, 12.5cm soaker
SS006 Painbuster Soaker Kit includes catheter, introducer needle, 400ml volume x 10ml/hr, 12.5cm soakerflow restrictor, filter
Dressings, Resorbable, Antiadhesion
Austramedex (VIC) Pty LtdAR021 Surgiwrap Bio Absorbable Antiadhesion Barrier All sizes with and without suture holes Temporary approval -
funded when clinical indications are present.
Johnson & Johnson Medical Pty LtdJJ010 Interceed Absorbable Adhesion Barrier Oxidized Regenerated Cellulose 7.6cm x 10.2cm Temporary Approval -
Funded when clinical indications for use are present.
Drug Delivery System
Biomet Australia Pty LtdBI280 Septopal Chain Septopal Beads PMMA, Stainless Steel 30 bead chain
PART A - Prostheses List by Category, Groups and Sponsor Page 74 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Enteral Feeding Kits
Abbott Australasia Pty LtdAY002 Flexiflo inverta PEG kit Basic, Flexiflo Composition - biocompatible silicone 20F
inverta PEG kit with snare tube. Items included in kit/product - Sliding retention disc, Insertion wire, Gastrostomy tube with attached Dilator Catheter, seldinger needle 14g, magna port connector, scalpel, Snare (in kit with
AY003 Durapeg kit Composition - biocompatible 16FPolyurethene tube. Items included in kit/product - Sliding retention disc, drum wire dispenser, 16 french peg tube, pinch clamp, luer lock connector, scalpel.
AY004 Hide-A-Port Composition - biocompatible silicone. Size: 14 french, length: 1.5cm; Size: 16 Items included in kit/product - 1 low french, Length: 1.5, 2.0cm; Size: 18 profile Balloon Gastrostomy tube, Straight french, Length: 1.2cm, 1.5cm, 1.7cm, extension tube, Extension tube with right 2.0cm, 2.3cm, 2.5cm, 3.0cm, 3.5cm, angle adaptor, luer lock syringe, lubricant. 4.0cm; Size: 20 french, Length: 2.0cm,
2.7cm, 3.0cm, 3.5cm, 4.0cm; Size: 24 french, Length: 1.7cm, 2.0cm, 2.5cm,
Bard Australia Pty LtdBA047 Gastrostomy Tube Silicone 16 - 20 French BA075 Gauderer Ponsky 20Fr PEG Kits Genie PEG System 20 French
Kendall Australasia Pty Ltd T/A Tyco Healthcare Pty LtdKA015 Entristar Skin Level Gastrostomy Kits Skin level non-balloon internal retention 16fg x 1.5cm, 16fg x 1.7cm, 16fg x Temporary approval,
bolster gastrostomy kit, including 2.0cm, 16fg x 2.7cm, 16fg x 3.0cm, pending review of Entristar gastrostomy tube, accessory 16fg x 3.5cm, 20fg x 1.5cm, 20fg x product groupbolus and continuous feeding tubes, 2.ocm, 20fg x 2.5cm, 20fg x 3.0cm, syringes for inflation and flushin. Patient 20fg x 3.5cm, 20fg x 4.0cm, 20fg x 4.5cm
KA016 Kangaroo Gastrostomy Feeding Tubes 100% silicone gastrostomy with internal 12fg, 14fg, 16fg, 18fg, 20fg, 22fg, 24fgretention balloon
KA017 NutriPort Balloon Skin Level Gastrostomy Skin level silicone balloon gastrostomy 12fg x 0.8 - 5.0cm, 14fg x 0.8 - 5.0cm, Temporary approval, kit, including NutriPort gastronomy tube, 16fg x 0.8 - 5.0cm pending review of accessory bolus and continuous feeding product grouptubes, syringes for inflation and flushing, Patient handbook
PART A - Prostheses List by Category, Groups and Sponsor Page 75 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Kimberly-Clark Australia Pty LtdKI001 Kimberly-Clark Aust Pty Ltd Enteral 68914 MIC Gastrostomy Tubes Model MIC* Percutaneous Endoscopic
Feeding Kit 100 Series Gastrostomy (P.E.G) Feeding Tubes/Kits 14, 20, 24 French #0630 Series PUSH (OTW) Method & #0640Series PULL
KI002 Kimberly-Clark Aust Pty Ltd Enteral 68914 MIC Gastrostomy Tubes Model MIC* Percutaneous Endoscopic feeding kit, Mic* Percutaneous 100 Series Gastrostomy (P.E. G) Feeding BASIC Endoscopic Gastrostomy (P.E.G) Tubes/Kits 14, 20, 24 French#0644
KI003 Kimberly-Clark Aust Pty Ltd Enteral 68914 MIC Gastrostomy Tubes Model Feeding Adaptors (Universal or Bolus) forfeeding kit, Mic* Percutaneous 100 Series use with 14, 20 &24 F MIC* Endoscopic Gastrostomy (P.E.G) PEG's#0135 ˆ Series
KI004 Kimberly-Clark Aust Pty Ltd Enteral 68914 MIC Gastrostomy Tubes Model MIC-KEY* Low Profile Gastrostomy feeding kit, MIC-KEY Low Profile 100 Series Feeding Tubes/Kits 14 - 24 French, 0.8 Gastrostomy Feeding Tubes/Kits cm - 4.5 cm
KI005 Kimberly-Clark Aust Pty Ltd Enteral 68914 MIC Gastrostomy Tubes Model SECUR-LOK* Extension Sets & Bolus feeding kit, MIC-KEY Low Profile 100 Series Feeding Sets 30.5 cm & 60.9 cmGastrostomy Feeding Tubes/Kits
KI007 MIC* Gastrostomy Feeding Tube; MIC* Medical Grade Silicone Construction. 12fr - 3-5ml balloon, 14fr - 3-5ml Bolus Gastrostomy Tube Silicone Internal Inflatable Retention balloon, 16fr - 3-5ml balloon, 18fr - 7-
Balloon, SECU-LOK* External Retention 10ml balloon, 20fr - 7-10ml balloon, 22fr Ring, Universal Feeding Port Connector, - 7-10ml balloon, 24fr - 7-10ml balloon, Medication Port, Dual Exit Ports, Tapered 26fr - 7-10ml balloon, 28fr - 7-10ml Distal Tip, Radiopaque Strip, Sterile.
Promedica Pty LtdPO001 Corflo Cubby LPGD Kit Low profile gastronomy device 12 - 24fg x 1.0 - 4.5cmPO002 Corflo Gastronomy Replacement Device Dual and triple gastronomy tubes Dual 12 - 24fg 5 - 20cc balloon; Triple 16
- 24fg 20cc balloon
PO003 Corflo Max 20fg PEG Kit Complete with Sterile enteral feeding tube with 20fg7fg Snare - "Pull Type"
PO004 Corflo Max 20fg PEG Kit "Pull Type" Sterile enteral feeding tube with 20fg
Sherwood Davis & Geck T/A Tyco Healthcare Pty Ltd SG001 Gastrostomy Tube EntriStar Single Pass PEG 16fg, 20fg
William A Cook Aust Pty LtdWC070 Gastrostomy Tube PEG Balloon Replacement Tube - Single 18, 24frWC072 Passport Low Profile Device Enteral/Gastrostomy FEEDING TUBE French Sizes: 20.0,
24.0 Length: 1.2,1.7,2.4,3.4,4.4 cm
PART A - Prostheses List by Category, Groups and Sponsor Page 76 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC183 Gastrostomy Tube PEG Balloon Replacement Tube - Box of 18, 24frWC184 Percutaneous Endsocopic Gastrostomy PEG Gastrostomy Tube Pull or Push 18, 20, 24fr
System - Single
WC185 Percutaneous Endoscopic Gastrostomy PEG Gastrostoym Tube Pull or Push 18, 20, 24frsystem - Box of 2
Filters, Vena Cava
William A Cook Aust Pty LtdWC096 Cook Vena Cava Filter Universal Femoral and Jugular Filter Maximum Diameter 30mm, Length
Gastroplasty Bands
Advanced ORT Pty LtdOA003 Adjustable Peri Gastric Belt-Midband Silicon moulded peri gastric band and Peri gastric band - 2.2 x 17.5 x 0.8cm,
implantable chamber Implantable chamber - one size only
EMT Healthcare Pty LtdEM017 MiniMizer Adjustable Gastric Band Silicon elastomer 14mm wide, 16.6cm band two phase
closure, 1: 31mm inner diameter, phase 2: 26mm inner diameter. 40cm silicon tube
Endotherapeutics Pty LtdET042 Soft Gastric Banding System Sterile long term implant for the treatment One size only
of obesity. Supplied in kit format with catheter, port and huber needles
Inamed Australia Pty LtdIN001 Lap-Band Adjustable Gastric Banding - 9.75, 10 and 11cm
(LAGB) System
Johnson & Johnson Medical Pty LtdJJ412 Swedish Adjustable Gastric Band Silicone One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 77 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Gel, Resorbable, Antiadhesion
N Stenning & Co Pty LtdNG037 SprayGel Adhesion Barrier Polymer Kit PK-A-6010 SprayGel Polymer Kit; PK-A- One size only; PK-A-4210 - 5 Kits/Box Temporary approval -
4210 SprayGel Open Surgery Polymer Kit funded when clinical (10ml) indications for use are
present.
Grafts, Dura, Biological
Advanced Biomedical Pty LtdAB012 Peri-Strips Dry Model No PSD 4506-EN One size only Temporary ApprovalAB013 Peri-Strips Dry Model No PSD 6006-UN One size only Temporary ApprovalAB014 Peri-Strips Dry Model No PSD 4506-ETSN One size only Temporary ApprovalAB015 Peri-Strips Dry Model No PSD 3506-AN One size only Temporary ApprovalAB016 Peri-Strips Dry Model No PSD 3006-N One size only Temporary ApprovalAB017 Peri-Strips Dry Model No PSD 10006-EN One size only Temporary ApprovalAB018 Peri-Strips Dry Model No PSD 4506-UN One size only Temporary ApprovalAB019 Peri-Strips Dry Model No PSD 9006-UN One size only Temporary ApprovalAB020 Peri-Strips Dry Model No PSD 8006-UN One size only Temporary ApprovalAB021 Peri-Strips Dry Model No PSD 7506-EN One size only Temporary ApprovalAB022 Peri-Strips Dry Model No PSD 5506-EN One size only Temporary Approval
Haemostatic Materials, Animal Origin
Bard Australia Pty LtdBA119 Avitene Ultrafoam Hemostatic sponge applied directly to the 12.5-7 2 cm x 6.25cm x 7mm
source of surgical bleeding
BA120 Avitene Ultrafoam Hemostatic sponge applied directly to the 50 8cm x 6.25cm x 1cmsource of surgical bleeding
PART A - Prostheses List by Category, Groups and Sponsor Page 78 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA121 Avitene Ultrafoam Hemostatic sponge applied directly to the 100 8cm x 12.5cm x 1cmsource of surgical bleeding
BA122 Avitene Ultrafoam Hemostatic sponge applied directly to the 100/Thin 8cm x 12.5cm x 3mmsource of surgical bleeding
BA123 Avitene Ultrafoam Hemostatic sponge applied directly to the 200 8cm x 25cm x 1cmsource of surgical bleeding
Infusion Controller Administration Sets
Baxter Healthcare Pty LtdBX245 Patient Control Module Sterile infusor devices, spring or Module 0.5ml dose, Module 2 ml dose
elastomer driven
Roche Diagnostics Australia Pty LtdRO004 "Disetronic Infusion Sets" Tender II 17/30 Pack 20/10RO010 "Disetronic Infusion Sets" Tender II 17/60 Pack 20/10RO011 "Disetronic Infusion Sets" Tender II 17/80 Pack 20/10RO012 "Disetronic Infusion Sets" Tender I 17/60 Pack 10RO013 "Disetronic Infusion Sets" Rapid D 6/60 Pack 15/5RO014 "Disetronic Infusion Sets" Rapid D 6/80 Pack 15/5RO015 "Disetronic Infusion Sets" Rapid D 8/60 Pack 15/5RO016 "Disetronic Infusion Sets" Rapid D 8/80 Pack 15/5
Infusion Pump Administration Sets
Australasian Medical & Scientific LtdAN002 Animas IR Insulin Infusion Cartridge 3.0ml Cartridge, sterile, indicated as one size only
reservoir for insulin by the Animas infusion pump; not intended for use with any other infusion device.
PART A - Prostheses List by Category, Groups and Sponsor Page 79 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AN003 Animas Insulin Infusion Sets (INFUSION SET, COMFORT, 23", one size onlyHOSP 10, INFUSION SET, COMFORT 43", HOSP 10) Needle guard, soft cannula, adhesive tape, introducer needle, cannula housing, tubing, connector needle, circular protective cap and
AN004 Animas Insulin Infusion Set (INFUSION SET, COMFORT, 23", STD One size only 5/5 AND INFUSION SET, COMFORT, 43" STD 5/5) Needle guard, soft cannula, adhesive tape, introducer needle, cannula housing, tubing, connector needle, circular protective cap and disconnect
Baxter Healthcare Pty LtdBX240 6060 Multi-therapy Infusion Pump 78 inch and 110 inchBX241 Solution sets for 6060 Multi-therapy Infusion Administration Sets (contains DEHP 1.2micron filter) 116
Infusion Pump inch, (contains DEHP 0.22 micron filter) 116 inch, (Non DEHP) 78 inch, (Non DEHP with 1.2 micron filter)116inch, (Non DEHP with 0.22 micron filter) 116
BX242 Epidural Set with filter for 6060 Multi- Epidural Set with filter 69 inches and 107 inchestherapy Pump
BX243 Epidural Set for 6060 Multi-therapy One size onlyInfusion Pump
BX244 Solution Sets for 6060 Multi-therapy Infusion administration set Solution set for 6060 pump 78 inch and infusion pump 110 inch
Global Manufacturing Technology Pty LimitedGM040 Alpha Infusion Pump Alpha Infusion Pump Kit, includes Alpha 450ml Temporary Approval,
Infusion Pump, introducer needle, pending review of syringe, hip pack, labels and instructions product groupfor use plus Alpha Cath Infusion Catheter
Medical Specialties Australia Pty LtdMS029 Medical Specialties Microject Drug Ambulatory Infusion Pump System, Microject Drug Administration Sets
Administration Sets Administration Sets and Accessories
MS039 Medical Specialties "Deltec Cozmo Drug Infusion Reservoir 3ml Cartridges - Box 25Ancillary Equipment"
MS040 Medical Specialties/Unomedical "Deltec Drug Infusion Set Box 20Cozmo Ancillary Equipment"
PART A - Prostheses List by Category, Groups and Sponsor Page 80 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Australasia Pty LtdMC058 Medtronic SynchroMed Catheter Model Radiopaque Silicone 89cmMC285 Medtronic MiniMed Insulin Pump Ambulatory Insulin Infusion Pump 60-110cm
Infusion Sets System Administration Sets and Accessories: Quick-set MMT-390, MMT-391, MMT-392, MMT-393; Sof-set Micro MMT-320, MMT-321; Sof-set Ultimate MMT-315, MMT-316 (all tubing with cannula for use with MMT-507C and MMT-508 insulin infusion pump); Silhouette MMT-371, MMT-372, MMT-373, MMT-374 (Full Set of 10 complete sets: 10 sites + 10 tubing, OR Combo Set: 10 sites + 5 tubing for use with MMT-507C or MMT-508 insulin infusion pump); Serters MMT-395, MMT-300, MMT-385 (For use with MMT-511 or MMT-507C or MMT-508 insulin infusion pump); Polyfin MMT-106, MMT-306, MMT-307, Polyfin QR MMT-165, MMT-365, MMT-366 (bent needles with wings for use with MMT-507C and
MC286 Medtronic MiniMed Paradigm Insulin Ambulatory Insulin Infusion Pump 60-110cmPump Infusion Sets System Adminstration Sets and
accessories: Quick-set MMT-396, MMT-398, MMT-397, MMT-399; Sof-set Micro MMT-324, MMT-325; Sof-set Ultimate MMT-317, MMT-318 (all tubing with cannula for use with MMT-511 insulin infusion pump), Silhouette MMT-377, MMT-379, MMT-378, MMT-380 (Full Set of 10 complete sets: 10 sites + 10 tubing, OR Combo Set: 10 sites + 5 tubing for use with MMT-511 insulin
MC304 Medtronic Minimed Paradigm Insulin Reservoir Model MMT - 332A (for use 3.0 ml reservoirInfusion Pump Reservoir with the Paradigm Model MMT - 712).
Polycarbonate
Roche Diagnostics Australia Pty LtdRO003 Disetronic Administration Sets and Adaptor D-Tron plus 10/box
Accessories
RO005 Disetronic Administration Sets and Adaptor H-Tron plus Grey/Blue eachAccessories
PART A - Prostheses List by Category, Groups and Sponsor Page 81 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
RO006 Disetronic Administration Sets and Plastic Cartridge (H-Tron) 3.15mL 25/boxAccessories
RO007 Disetronic Administration Sets Plastic Cartridge (D-Tron plus) 3.0mL 5/box
Smiths Medical Australasia Pty LtdSI024 Medication Cassettes (50ml & 100ml) Pump 50 mLSI025 Medication Cassettes (50ml & 100ml) Pump 100 mLSI026 Flexible Medication Reservoir, 250ml, Pump 250 mL
Model 21-6167-24
SI028 Extention Set (30" & 60") Pump 76 cmSI029 Extention Set (30" & 60") Pump 152 cmSI031 CADD-TPN Administration Sets, 0.2 Pump 1.2 micron filter
Micron and 1.2 Micron Filters
SI036 Flexible Medication Reservoir, 250ml Pump 250 mLModel 21-6167-24
SI040 Adminstration Set Bag Spike, Integral Anti-Siphon Valve 196cm Bag Spike, Box of 12SI041 Administration Set High Volume, with 0.2 Micron Filter, Box of 15
Male Luer, Add On Anti Syphon Valve
SI042 Extension Set Microbore TOTM with 0.22 Filter, M/M 152cm, Box of 15Luers, for Flolan
SI043 Adminstration Set 1.2 Micron Filter, Add on Anti Syphon Box of 15Valve for TPN
SI044 Administration Set High Volume, TOTM- Plasticized Blue 305cm, Box of 15Striped with 1.2 Micron Filter, Male Luer, Add On Anti-Siphon Valve
Infusion Pumps
Medical Specialties Australia Pty LtdMS031 Medical Specialties "Deltec Cozmo Insulin Ambulatory Insulin Infusion Pump Deltec Cozmo Insulin Pump - each
Pump"
Medtronic Australasia Pty LtdMC300 Medtronic MiniMed Insulin Infusion Model MMT - 508 One Size Only
Pump System
PART A - Prostheses List by Category, Groups and Sponsor Page 82 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC302 Medtronic Minimed Insulin Infusion Paradigm Model MMT - 512. One Size Onlypump System
MC303 Medtronic Minimed Insulin Infusion Paradigm Model MMT - 712 One Size OnlyPump System
Orthocare Pty LimitedOC003 Pain Care 2000L Pain Care 2000L System One Size OnlyOC004 Pain Care 2000L "Y" Accessory Kit One Size OnlyOC005 Pain Care 2000L Multiport Catheter 54" One Size Only
Infusion Pumps, Ambulatory, Insulin
Australasian Medical & Scientific LtdAN001 Animas IR 1000 Insulin Infusion Pump One size onlyAN005 Animas IR 1200 Insulin Infusion Pump Ambulatory Insulin Infusion Pump One size only
(Insulin Infusion Pump IR 1200 series)
AN006 Animas IR 1200 Insulin Infusion Sterile, indicated as reservoir for insulin Cartridge Capacity - 2.0mL or 200 units Temporary Approval, Cartridge (Insulin Infusion Pump IR 1200 by the Animas Infusion Pump, not pending review of
intended for use with any other infusion product group
Medical Specialties Australia Pty LtdMS020 Infusa MPD Powered Drug Infusion System, Micro Small, Medium, Large
dose battery operated, Syringe type
Medtronic Australasia Pty LtdMC283 Medtronic MiniMed Paradigm Insulin Model MMT-511- One Insulin Pump One Size Only
Infusion Pump System
Roche Diagnostics Australia Pty LtdRO001 "Disetronic Insulin Infusion Pump D-Tron plus Large Kit Blue or AnthraciteRO002 "Disetronic Insulin Infusion Pump H-Tron plus Large Kit Blue or GreyRO008 "Disetronic Insulin Infusion Pump H-Tron plus Small Kit Blue or GreyRO009 "Disetronic Insulin Infusion Pump D-Tron plus Small Kit Blue or Grey
PART A - Prostheses List by Category, Groups and Sponsor Page 83 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Infusion Pumps, Ambulatory, Other
Smiths Medical Australasia Pty LtdSI027 CADD Administration Sets, 198cm, with Pump 198 cm
Bag Spike & Add-on Anti-siphon Valve, TOTM Plasticized Tubing, Model No. 21-
SI037 CADD Legacy 1 Model 6400 Ambulatory Pump One size only Infusion Pump
SI038 CADD Legacy Plus Model 6500 Pump One size onlyAmbulatory Infusion Pump
Infusion Pumps, Ambulatory, Syringe
Medical Specialties Australia Pty LtdMS019 Infusa T, Infusa TS or Infusa DSLT Powered Drug Infusion System, Battery Small, Medium, Large
operated, Syringe type
Medtronic Australasia Pty LtdMC282 Medtronic MiniMed Insulin Infusion Ambulatory Insulin Infusion Pump One Size Only
Pump Reservoir System Administration Sets and Accessories; Insulin Infusion Pump Reservoir MMT-103A (for use with
MC284 Medtronic MiniMed Paradigm Insulin Paradigm Insulin Infusion Pump One Size OnlyInfusion Pump Reservoir Reservoir MMT-326A (for use with
Model MMT-511 insulin infusion pump)
Infusion Pumps, General-Purpose
Medical Specialties Australia Pty LtdMS021 Medical Specialties "Walkmed Infusion Ambulatory Infusion Pump System, Walkmed Infusion Pump System
Pump System" Powered Drug Infusion Administration Sets and AccessoriesSystem and Ancillary Equipment (McKinley, USA)
MS022 Medical Specialties "Walkmed Drug Ambulatory Infusion Pump System, Walkmed Drug Administration ReservoirsAdministration Reservoir" (McKinley, Administration Sets and Accessories
PART A - Prostheses List by Category, Groups and Sponsor Page 84 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MS023 Medical Specialties "Walkmed Drug Ambulatory Infusion Pump System, Walkmed Drug Administration SetsAdministration Sets" (McKinley, USA) Administration Sets and Accessories
Infusion Pumps, Implantable
Getz Bros. & Co. (Aust) Pty LtdGB111 AccuRx Constant Flow Implantable Drug Infusion Systems, powered and One Size Only
Pump Model ancillary equipment5304,5305,5306,5307,5308,5309,5310,5312,5315,5320,5326,5332
Infusion Pumps, Micro
Smiths Medical Australasia Pty LtdSI032 CADD-Micro Model 5900 Ambulatory Pump One size only
Infusion Pump
Infusion Pumps, Patient-Controlled Analgesic
Medical Specialties Australia Pty LtdMS028 Medical Specialties Microject Infusion Ambulatory Infusion Pump System, Microject Pumps
Pump System Administration Sets and Accessories
Smiths Medical Australasia Pty LtdSI034 CADD-PRIZM VIP (Variable Infusion Pump One size only
Profile) Model 6100; CADD-PRIZM PCS Ambulatory Infusion Pump, Model 6100
SI039 CADD Legacy PCA Model 6300 Pump One size onlyAmbulatory Infusion Pump
PART A - Prostheses List by Category, Groups and Sponsor Page 85 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Injection/Infusion Ports, Implantable
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS052 Chemosite Implantable Venous Access Port - Single Lumen (ChemoSite*) 7-9 french; 10.5 french. * Trademark of United
System States Surgical Corporation
B Braun Australia Pty LtdBB082 Celsite Epoxy Single Access Port Epoxy/titanium Standard/small/babyBB083 Celsite Epoxy Dual Access Port Epoxy/titanium Standard/small/babyBB084 Celsite MBS Single Access Port Methylbutadeine styrene Standard/smallBB086 Celsite Epoxy Peritoneal Port Epoxy/titanium 32x27x13mm
Bard Australia Pty LtdBA046 The Bard Button Implantable Injection, Silicone Replacement Gastrostomy 18 - 24 French
Infusion Port
BA056 Subcutaneous Ports Hickman open-ended catheter, single 8 - 9.6 French CatheterBA057 Groshong Subcutaneous Ports Single or dual lumen catheter 8 - 9.6 French CatheterBA058 Cathlink Implanted Port Single lumen 6 - 8 French CatheterBA059 Dual Lumen Subcutaneous Ports Silicone, Polyurethane or ChronoFlex 7 - 10 French Catheter
Open-ended Catheter
BA060 Hickman Subcutaneous Ports Low-Profile 6 - 6.6 French Catheter
Cecil E Mayo Pty LtdCM009 L-Port Implantable Vascular Access Arrow Model No.'s VARRX AP01040, Ports - H10mm, L25mm, Weight 9grams,
AP01010, AP01011, AP001012, Internal Vol. 0.3ml. Catheter75cmAP01013, AP01015, AP01017, AP06046, AP06016, AP06020, AP06012, AP06022, AP06025. Plastic low profile port with self sealing silicone septum and detached silicone catheters.
CM010 L-Port Implantable Vascular Access Arrow Model No.'s VARRX AP01031, Ports - H10mm, L25mm, Weight 9grams,AP01031, AP01032, AP01033, AP01035, Internal Vol. 0.3ml. Catheter75cm AP01037, AP06036, AP06040, AP06041, AP06042, AP06045. Titanium Low Profile Ports with self sealing silicone septum and detached silicone
PART A - Prostheses List by Category, Groups and Sponsor Page 86 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Endotherapeutics Pty LtdET021 Jet Port Catheter System Polyoxymethylene injection port 28mm
Inamed Australia Pty LtdIN002 Lap-Band Access Port For use with the Lap-Band Adjustable Standard, low profile
Gastric Banding System
Johnson & Johnson Medical Pty LtdJJ444 Swedish Adjustable Gastric Band - Titanium implantable infusion port & One size only
Injection Port & Locking Connector locking connector for the Swedish Adjustable Gastric Band. Replacement port & locking connector to the one included with the Swedish Adjustable
Medical Specialties Australia Pty LtdMS014 Injection/Infusion Ports Sterile Plastic/titanium, single lumen 5-15FMS015 Injection/Infusion Ports Sterile Plastic/titanium, dual lumen 10, 10.5, 12FMS016 Injection/Infusion Ports Sterile Plastic/titanium, paediatric 5, 6, 7,8, 9.6F
Smiths Medical Australasia Pty LtdSI001 Injection/Infusion Ports, Sterile - PORT- Port - single lumen One size only
A-CATH II Trans Arterial Percuataneous
SI002 Injection/Infusion Ports, Sterile - PORT- Port - single lumen One size onlyA-CATH Intraspinal 501CS System
SI003 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm O.D. PolyFlow Polyurethane A-CATH P.A.S Port T2 System
SI005 Injection/Infusion Ports, Sterile - PORT- Port - single lumen One size onlyA-CATH Peritoneal System
SI006 Injection/Infusion Ports, Sterile - PORT- Port - single lumen One size onlyA-CATH Intraspinal 500CS System
SI007 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 2.3 mm silicone catheterA-CATH Arterial Titanium System
SI008 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 2.8 mm silicone catheter & 9 French A-CATH Titanium Venous Portal introducer set
SI009 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH Implantable Venous Access
SI010 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9mm polyurethane catheterA-CATH Implantable Access System - Venous Portal, with introducer set
PART A - Prostheses List by Category, Groups and Sponsor Page 87 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SI011 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH Low Profile Titanium Venous
SI012 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH Low Profile Implantable Venous System, with introducer set
SI013 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 2.8 mm silicone catheterA-CATH II Titanium Venous System
SI014 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 2.8 mm silicone catheterA-CATH II Titanium Venous System, with introducer set
SI015 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH II Titanium Venous System
SI016 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH II Titanium Venous System with introducer set
SI017 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 2.6 mm polyurethane catheterA-CATH Titanium Venous System with introducer set
SI018 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH II Low Profile Titanium Venous System
SI019 Injection/Infusion Ports, Sterile - PORT- Port - single lumen 1.9 mm polyurethane catheterA-CATH II Low Profile Titanium Venous System with introducer set
SI022 Injection/Infusion Ports, Sterile - PORT- Port - dual lumen 3.4 mm silicone catheterA-CATH II Dual Lumen Titanium Venous system
SI023 Injection/Infusion Ports, Sterile - PORT- Port - dual lumen 3.4 mm silicone catheterA-CATH II Dual Lumen Titanium Venous system and introducer set
Mesh
Endocorp Pty LtdEC045 Parietex Multifibre Polyester Surgical Mesh 12cm x 8cm to 30cm x 32cm (3D)
PART A - Prostheses List by Category, Groups and Sponsor Page 88 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Endotherapeutics Pty LtdET046 Parietene Monofilament Polypropylene Surgical 6cm x 11cm to 30cm x 30cm SingleET047 Parietex Multifibre Polyester Surgical Mesh 7cm x 1.5cm to 20cm x 20cm SingleET048 Parietene Monofilament Polypropylene Surgical 6cm x 11cm to 30cm x 32cm (3D)
Mesh - three dimensional & X-shape
Johnson & Johnson Medical Pty LtdJJ179 VYPRO Mesh Vicryl (polyglactin 910) / Prolene 30cm x 30cm
(polypropylene) composite mesh
JJ240 VYPRO II Mesh Composition - equal part Vicryl Small 6 x 11cmpolyglactin yarn - non-absorbable Prolene polypropylene yarn. Partly absorbable lightweight mesh for tension free-inguinal
JJ241 VYPRO II Mesh Composition - equal part Vicryl Medium 12 x 10cmpolyglactin yarn - non-absorbable Prolene polypropylene yarn. Partly absorbable lightweight mesh for tension free-inguinal
JJ242 VYPRO II Mesh Composition - equal part Vicryl Large 15 x 10cmpolyglactin yarn - non-absorbable Prolene polypropylene yarn. Partly absorbable lightweight mesh for tension free-inguinal
JJ243 VYPRO II Mesh Composition - equal part Vicryl Extra large 15 x 15cmpolyglactin yarn - non-absorbable Prolene polypropylene yarn. Partly absorbable lightweight mesh for tension free-inguinal
JJ434 GYNECARE GYNEMESH* PS Gynecare Gynemesh* PS is a non- 10cm x 15cm (4" x 6")absorbable Prolene soft mesh indicated for tissue reinforcement and long lasting stabilisation of fascial structures of the pelvic floor in vaginal wall prolapse. Gynemesh PS* is constructed of knitted filaments of extruded polypropylene identical in composition to Prolene* polypropylene suture. It is packaged sterile, one 10 x 15cm piece per box.
Medical Specialties Australia Pty LtdMS030 TiMESH light Prosthetic warp-knitted fabric made of 10 x15 cm TiMESH light
monofil polypropylene threads with an encapsulating titanic coating
PART A - Prostheses List by Category, Groups and Sponsor Page 89 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MS032 TiMESH extralight Prosthetic warp-knitted fabric made of 10 x 15cm TiMESH extralightmonfil polypropylene threads with an encapsulating titanic coating
MS033 TiMESH light Prosthetic warp-knitted fabric made of 15 x 15cm TiMESH lightmonofil polypropylene threads with an encapsulating titanic coating
MS034 TiMESH extralight Prosthetic warp-knitted fabric made of 15 x15cm TiMESH extralightmonofil polypropylene threads with an encapsulating titanic coating
MS035 TiMESH light Prosthetic warp-knitted fabric made of 20 x 15cm TiMESH lightmonofil polypropylene threads with an encapsulating titanic coating
MS036 TiMESH extralight Prosthetic warp-knitted fabric made of 20 x 15cm TiMESH extralightmonofil polypropylene threads with an encapsulating titanic coating
MS037 TiMESH Extra Large Prosthetic warp-knitted fabric made of 30 x 30cm TiMESHmonofil polypropylene threads with an encapsulating titanic coating
MS038 TiMESH Extra Large Prosthetic warp-knitted fabric made of Extra Large TiMESHmonofil polypropylene threads with an encapsulating titanic coating
MS041 TiCOVER Titanized polypropylene composite. TiCOVER lightProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS042 TiCOVER Titanized polypropylene composite. TiCOVER strongProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS043 TiPLUG/TiPATCH System Titanized polypropylene composite. TiPLUGProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS044 TiPLUG/TiPATCH System Titanized polypropylene composite. TiPATCHProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
PART A - Prostheses List by Category, Groups and Sponsor Page 90 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MS045 TiPLUG/TiPATCH System Titanized polypropylene composite. TiPLUG + TiPATCHProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS046 TiLIFT Titanized polypropylene composite. One sizeProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS047 TiGUARD Titanized polypropylene composite. TiGUARD light 20 x 15cmProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS048 TiGUARD Titanized polypropylene composite. TiGUARD light 30 x 30cmProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS049 TiGUARD Titanized polypropylene composite. TiGUARD strong 20 x 15cmProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
MS050 TiGUARD Titanized polypropylene composite. TiGUARD strong 30 x 30cmProsthetic warp-knitted fabric made of monofilament polypropylene threads with an encapsulating titanic coating.
Mesh, Polyglycolic Acid
Johnson & Johnson Medical Pty LtdJJ019 Vypro Mesh Vicryl/Prolene Composite Mesh Medium - 15cm x 15cmJJ020 Vicryl Mesh 1 sheet/box Large - 30cm x 30cmJJ173 VICRYL Mesh Polyglactin 910 - synthetic absorbable 15cm x 15cm
Sherwood Davis & Geck T/A Tyco Healthcare Pty Ltd SG002 Dexon Mesh Danbury 7979-00 Beige polyglycolic acid absorbable 18 x 23cm
surgical mesh fabric
PART A - Prostheses List by Category, Groups and Sponsor Page 91 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mesh, Polymeric
Atrium Australia-Pacific Rim Pty LtdAC005 Atrium polypropolene mesh - surgical Polypropolene 7.5 x 15cmAC006 Atrium polypropolene mesh - surgical Polypropolene 30 x 30cmAC007 Atrium polypropolene mesh - surgical Polypropolene 15 x 15cmAC008 Atrium polypropolene mesh - surgical Polypropolene 26 x 36cmAC009 Atrium polypropolene mesh - surgical Polypropolene - Pre-shaped with hole 6.5 x 12.5cmAC010 Atrium polypropolene mesh - surgical Polypropolene 5 x 10cmAC011 Atrium polypropolene mesh - surgical Polypropolene mesh plug Small, Medium, Large and Extra Large
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS055 Mesh Polyproplene; Monofilament Multifilament Polypropylene; 7.6cm x 12.7cm Surgipro* mesh (3 x 5 * Trademark of United
Polyproplylene. Monofilament Polypropylene. States Surgical Corporation
AS056 Mesh Polyproplene; Monofilament Multifilament Polypropylene; 35.6cm x 22.9cm Surgipro* mesh (14 x * Trademark of United Polyproplylene. Monofilament Polypropylene. 9 inch). States Surgical
Corporation
AS057 Mesh Polyproplene; Monofilament Multifilament Polypropylene; 2.5cm x 10.2cm Surgipro* mesh (1 x 4 * Trademark of United Polyproplylene. Monofilament Polypropylene. States Surgical
Corporation
AS058 Mesh Polyproplene; Monofilament Multifilament Polypropylene; 15.3cm x 15.3cm Surgipro* mesh (6 x 6 * Trademark of United Polyproplylene; SURGIPRO* Non Monofilament Polypropylene; inch); SPMM46: 10.2cm x 15.3cm (4 x 6 States Surgical Absorbable Monofilament Polypropylene SURGIPRO, Non-Asborbable inch). CorporationMesh.
AS068 Surgipro Non Absorbable Polypropylene Polypropylene Medium and LargeHernia Mate Plug System
B Braun Australia Pty LtdBB177 Premilene Mesh Premilene Nonabsorbable Polypropylene 2.5x10cm, 5 pieces
Surgical Suture Material Low Profile.
BB178 Premilene Mesh Premilene Nonabsorbable Polypropylene 5x10cm, 5 piecesSurgical Suture Material Low Profile.
BB179 Premilene Mesh Premilene Nonabsorbable Polypropylene 7.5x15cm, 5 piecesSurgical Suture Material Low Profile.
PART A - Prostheses List by Category, Groups and Sponsor Page 92 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB180 Premilene Mesh Premilene Nonabsorbable Polypropylene 10x15cm, 5 piecesSurgical Suture Material Low Profile.
BB181 Premilene Mesh Premilene Nonabsorbable Polypropylene 5x30cm, 5 piecesSurgical Suture Material Low Profile.
BB182 Premilene Mesh Premilene Nonabsorbable Polypropylene 26x36cm, 5 piecesSurgical Suture Material Low Profile.
BB183 Premilene Mesh Premilene Nonabsorbable Polypropylene 7.5x7.5cm, 5 piecesSurgical Suture Material Low Profile.
BB184 Premilene Mesh Premilene Nonabsorbable Polypropylene 15x15cm, 5 piecesSurgical Suture Material Low Profile.
BB185 Premilene Mesh Premilene Nonabsorbable Polypropylene 30x30cm, 5 piecesSurgical Suture Material Low Profile.
BB186 Premilene Mesh Premilene Nonabsorbable Polypropylene 4.5x9.5cm, 5 piecesSurgical Suture Material Low Profile.
BB187 Premilene Mesh Premilene Nonabsorbable Polypropylene 6x12.5cm, 5 piecesSurgical Suture Material Low Profile.
BB188 Premilene Mesh Premilene Nonabsorbable Polypropylene 4.5x10cm, 5 piecesSurgical Suture Material Low Profile.
BB189 Premilene Mesh Premilene Nonabsorbable Polypropylene 6x13.5cm, 5 piecesSurgical Suture Material Low Profile.
BB190 Premilene Mesh Premilene Nonabsorbable Polypropylene 4.5x10cm, 5 piecesSurgical Suture Material Low Profile.
BB191 Premilene Mesh Premilene Nonabsorbable Polypropylene 6x13.5cm, 5 piecesSurgical Suture Material Low Profile.
BB192 Premilene Mesh Premilene Nonabsorbable Polypropylene Self-Forming Plug-Small, 5 piecesSurgical Suture Material Low Profile.
BB193 Premilene Mesh Premilene Nonabsorbable Polypropylene Self-Forming Plug-Medium, 5 piecesSurgical Suture Material Low Profile.
BB194 Premilene Mesh Premilene Nonabsorbable Polypropylene Self-Forming Plug-Large, 5 piecesSurgical Suture Material Low Profile.
BB195 Premilene Mesh Premilene Nonabsorbable Polypropylene Self-Forming Plug-X-Large, 5 piecesSurgical Suture Material Low Profile.
Bard Australia Pty LtdBA061 Bard Mesh PerFix Plug Small, Medium, LargeBA062 Bard Mesh Visilex Laparoscopic mesh 3 x 6" & 4.5 x 6"
PART A - Prostheses List by Category, Groups and Sponsor Page 93 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA063 Bard Mesh Composix Ventral mesh 10"x14"BA064 Bard Mesh Composix Ventral mesh 12"x12"BA065 Bard Mesh Composix Ventral mesh 2" x 4"BA066 Bard Mesh Composix Ventral mesh 3" x 6"BA067 Bard Mesh Composix Ventral mesh 4" x 8"BA068 Bard Mesh Composix Ventral mesh 6" x 8"BA069 Bard Mesh Composix Ventral mesh 8" x 10"BA070 Bard Mesh Flat mesh Small - 1" x 4" / 2" x 4" / 2" x 12" / 3 " x
6" / Pre-shaped 1.8" x 4" / Pre-shaped
BA071 Bard Mesh 3D Mesh Large LeftBA072 Bard Mesh 3D Mesh Medium LeftBA073 Bard Mesh 3D Mesh Large RightBA074 Bard Mesh 3D Mesh Medium RightBA083 Bard Mesh Kugel Patch Small Oval 8 x 12cmBA084 Bard Mesh Kugel Patch Large Oval 14 x 18cmBA085 Bard Mesh Kugel Patch Small Circle 8 x 8cmBA086 Bard Mesh Kugel Patch Large Circle 12 x 12cmBA087 Bard Mesh Kugel Patch Medium Oval 11 x 14cmBA096 Bard Composix Kugel Hernia Patch Small Oval w/e PTFE 8 x 12 cmsBA097 Bard Composix Kugel Hernia Patch Medium Oval w/e PTFE 11 x 14 cmsBA098 Bard Composix Kugel Hernia Patch Large Oval w/e PTFE 14 x 18 cmsBA099 Bard Composix Kugel Hernia Patch Small Circle w/e PTFE 8 x 8cmsBA100 Bard Composix Kugel Hernia Patch Large Circle w/e PTFE 12 x 12cmsBA101 Bard Composix E/X Mesh Elliptical 4" x 6" (10 x 15cm)BA102 Bard Composix E/X Mesh Elliptical 6" x 8" (15 x 20cm)BA103 Bard Composix E/X Mesh Elliptical 7" x 9" (18 x 23cm)BA104 Bard Composix E/X Mesh Elliptical 8" x 10" (20 x 25 cm)BA105 Bard Composix E/X Mesh Elliptical 10" x 13" (25 x 33 cm)
PART A - Prostheses List by Category, Groups and Sponsor Page 94 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA106 Bard Composix E/X Mesh Rectangle 10" x 14" (25 x 36 cm)BA107 Bard Dulex Mesh Oval Shaped 7.5 x 10 cm, 1mm thicknessBA108 Bard Dulex Mesh Oval Shaped 8 x 12cm, 1mm thicknessBA109 Bard Dulex Mesh Oval Shaped 10 x 15 cm, 1mm thicknessBA110 Bard Dulex Mesh Oval Shaped 15 x 19 cm, 1mm thicknessBA111 Bard Dulex Mesh Oval Shaped 18 x 24 cm, 1mm thicknessBA112 Bard Dulex Mesh Oval Shaped 20 x 30cm, 1mm thicknessBA113 Bard Dulex Mesh Oval Shaped 26 x 34 cm, 1mm thicknessBA114 Bard Dulex Mesh Oval Shaped 10 x 15 cm, 2 mm thicknessBA115 Bard Dulex Mesh Oval Shaped 15 x 19 cm, 2 mm thicknessBA116 Bard Dulex Mesh Oval Shaped 18 x 24 cm, 2 mm thicknessBA117 Bard Dulex Mesh Oval Shaped 20 x 30 cm, 2 mm thicknessBA118 Bard Dulex Mesh Oval Shaped 26 x 34 cm, 2 mm thicknessBA127 Composix Kugel Hernia Patch Extra large oval - w/e PTFE 20cm X 25cmBA128 Composix Kugel Hernia Patch Extra large oval - w/ePTFE 25cm X 33cmBA131 Bard Composix Kugel Hernia Patch The Bard Composix Kugel Hernia Patch is Extra Large Oval w/e PTFE 18cm x
a self-expanding, non-absorbable, sterile prosthesis. Two layers of monofilament, polypropylene mesh are stitched to an ePTFE sheet; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device.
BA132 Bard Modified Kugel Hernia Patch The Bard Modified Kugel Hernia Patch is 7.5 cm (3") diametera self-expanding, non-absorbable, sterile prosthesis. It consists of two layers of monofilament, polypropylene mesh; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device. The positioning strap facilitates placement, positioning and suturing of the device.
PART A - Prostheses List by Category, Groups and Sponsor Page 95 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA133 Bard Modified Kugel Hernia Patch The Bard Modified Kugel Hernia Patch is 10 cm (4") diametera self-expanding, non-absorbable, sterile prosthesis. It consists of two layers of monofilament, polypropylene mesh; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device. The positioning strap facilitates placement, positioning and suturing of the device.
BA134 Bard Modified Kugel Hernia Patch The Bard Modified Kugel Hernia Patch is 11.5 cm (4.5") diametera self-expanding, non-absorbable, sterile prosthesis. It consists of two layers of monofilament, polypropylene mesh; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device. The positioning strap facilitates placement, positioning and suturing of the device.
BA135 Bard Composix Kugel Hernia Patch The Bard Composix Kugel Hernia Patch is Oval w/e PTFE 16cm x 31.2cm a self-expanding, non-absorbable, sterile prosthesis. Two layers of monofilament, polypropylene mesh are stitched to an ePTFE sheet; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device.
BA136 Bard Ventralex Hernia Patch The Bard Ventralex Patch is a self- 4.3 cm x 4.3 cm (1.7" x 1.7")expanding, non-absorbable, sterile prosthesis. Two layers of monofilament, polypropylene mesh are stitched to an ePTFE sheet; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device. The positioning strap facilitates placement,
BA137 Bard Ventralex Hernia Patch The Bard Ventralex Patch is a self- 6.4 cm x 6.4 cm (2.5" x 2.5")expanding, non-absorbable, sterile prosthesis. Two layers of monofilament, polypropylene mesh are stitched to an ePTFE sheet; an extruded monofilament PET polymer "ring" provides memory, adds stability to the device. The positioning strap facilitates placement,
PART A - Prostheses List by Category, Groups and Sponsor Page 96 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA138 Bard 3DMax Mesh The Bard 3DMax Mesh is a sterile Extra Large Left 5" x 7"prosthesis constructed of monofilament polypropylene mesh. 3DMax mesh is a three-dimensional, anatomically formed prosthesis for use in laparoscopic hernia
BA139 Bard 3DMax Mesh The Bard 3DMax Mesh is a sterile Extra Large Right 5" x 7"prosthesis constructed of monofilament polypropylene mesh. 3DMax mesh is a three-dimensional, anatomically formed prosthesis for use in laparoscopic hernia
BA157 Bard Mesh Flat Mesh Medium - 6" x 6"BA158 Bard Mesh Flat Mesh Large - 10" x 14"
EMT Healthcare Pty LtdEM004 Biomesh Reinforcement Mesh Macro porous 100% polypropylene mesh 2.5 x 10cm; 8 x 13cm; 15 x 15cm
for laproscopic and open surgical
EM005 Biomesh Reinforcement Mesh Macro porous 100% polypropylene mesh 5 x 10cm; 7 x 15cmfor laproscopic and open surgical
EM006 Biomesh Reinforcement Mesh Macro porous 100% polypropylene mesh 5cm x 30cm, 6cm x 30cmfor laproscopic and open surgical
EM007 Biomesh Reinforcement Mesh Macro porous 100% polypropylene mesh 25 x 36cm; 30 x 30cmfor laproscopic and open surgical
EM008 Intramesh Reinforcement Mesh Reinforcement mesh made from two 20 x 20cmsurfaces for intra-peritoneal visceral surgery (Polypropylene/ePTFE or
EM009 Intramesh Reinforcement Mesh Reinforcement mesh made from two 15 x 15cmsurfaces for intra-peritoneal visceral surgery (Polypropylene/ePTFE or
EM010 Intramesh Reinforcement Mesh Reinforcement mesh made from two 30 x 30cmsurfaces for intra-peritoneal visceral surgery (Polypropylene/ePTFE or
EM015 Biomesh Hernia Reinforcing Mesh Kit Polypropylene Mesh Hernia Repair Kit - EMT-KIT2BT2PMX2 - 2x15cm x 15cm includes Balloons (various) , Disposable Mesh, 1 x Distension Balloon, 1 x BalloonValve and EMT Ports Trocar, 2 x Ports, 1 x Disposable Valve
EM016 BIOMESH HERNIA REINFORCING Polypropylene Mesh Hernia Repair Kit - EMT -KIT2NM - 1 x 15cm x 15cm MESH KIT includes Balloons (various) , Disposable Mesh, 1 x Distension Balloon, 1 x Balloon
Valve and EMT Ports Trocar, 1 x Disposable Valve
PART A - Prostheses List by Category, Groups and Sponsor Page 97 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Endotherapeutics Pty LtdET002 Kugel Hernia Patch Polypropylene mesh Large ovalET003 Kugel Hernia Patch Polypropylene mesh Large circleET004 Kugel Hernia Patch Polypropylene mesh Small circleET005 Kugel Hernia Patch Polypropylene mesh Small/medium oval
Jecoli Pty LtdJO006 Herniamesh Polypropylene Mesh Hertra Polypropylene Mesh 4.5cm x 10cmJO008 Hertra Oval & Round Patch Pre-Shrunk Polypropylene Mesh for Ovals in 8cm x 12cm, 11cm x 14cm,
Inguinal, Laproscopic & Open Hernia 14cm x 18cm, & 10cm round
Johnson & Johnson Medical Pty LtdJJ172 Mersilene Mesh Non-absorbable polyester mesh 30cm x 30cmJJ174 Prolene Mesh Small polypropylene monofilament non 2.5cm x 10cm
absorbable mesh
JJ175 Prolene Mesh Medium polypropylene monofilament non 7.6cm x 15cm absorbable mesh
JJ176 Prolene Mesh Large polypropylene monofilament non 30cm x 30cmabsorbable mesh
JJ177 Prolene Mesh Small keyhole polypropylene 4.6cm x 10.2cmmonofilament non absorbable mesh
JJ178 Prolene Mesh Large keyhole polypropylene 6cm x 13.7cmmonofilament non absorbable mesh
JJ180 Prolene Hernia System Bilayer polypropylene non absorbable Onlay 4.5-5.5cm x 10cm; Connector synthetic mesh with connector 1.91 x 1.27cm; Underlay 7.5-10cm
JJ222 Prolene Mesh - medium Constructed of knitted filaments of Medium - 6" x 6"extruded polypropylene identical to that used in Prolene suture. Material is approx. 0.027mm thick. Non-absorbable mesh for tension free-inguinal hernia
JJ413 Prolene *3D Patch Polypropylene Mesh Sterile Three-dimensional device 5.49cm x 12.50cm 3DPatch large with consisting of a flat mesh onlay patch preshaped overlaysecured to a formed expandable diamond-shaped mesh patch component.
PART A - Prostheses List by Category, Groups and Sponsor Page 98 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ414 Prolene *3D Patch Polypropylene Mesh Sterile Three-dimensional device 5.49cm x 12.50cm 3D Patch with consisting of a flat mesh onlay patch medium preshaped overlaysecured to a formed expandable diamond-shaped mesh patch component.
JJ415 Prolene *3D Patch Polypropylene Mesh Sterile Three-dimensional device 5.49cm x 12.50cm 3D Patch medium consisting of a flat mesh onlay patch with extended overlaysecured to a formed expandable diamond-shaped mesh patch component.
JJ416 Prolene *3D Patch Polypropylene Mesh Sterile Three-dimensional device 5.49cm x 12.50cm 3D Patch large with consisting of a flat mesh onlay patch extended overlaysecured to a formed expandable diamond-shaped mesh patch component.
Sherwood Davis & Geck T/A Tyco Healthcare Pty Ltd SG004 Surgilene Mesh Constructed of knitted filaments of 1x4, 2x4, 3x6 10x14
polypropylene, non-absorbable
W L Gore & AssociatesGT084 Gore-Tex MycroMesh Plus ePTFE 1mm Thickness 20cm x 30GT087 Gore-Tex MycroMesh Plus ePTFE 1mm thickness Oval 26 x 34cmGT104 Gore-Tex DualMesh PLUS ePTFE 1mm Thickness 7.5 x 10cmGT107 Gore-Tex DualMesh PLUS ePTFE 15.0 x 19.0cm x 1mm OvalGT201 Dualmesh Plus Biomaterial ePTFE 8cm x 12cm x 1mmGT202 Dualmesh Plus Biomaterial ePTFE, oval 10cm x 15cm x 1mmGT203 Dualmesh Plus Biomaterial ePTFE 18cm x 24cm x 1mmGT204 Dualmesh Plus Biomaterial ePTFE 20cm x 30cm x 1mmGT205 Dualmesh Plus Biomaterial ePTFE, oval 26cm x 34cm x 1mmGT206 Dualmesh Plus Biomaterial ePTFE, oval 10cm x 15cm x 2mmGT207 Dualmesh Plus Biomaterial ePTFE, oval 15cm x 19cm x 2mmGT208 Dualmesh Plus Biomaterial ePTFE, 18cm x 24cm x 2mmGT209 Dualmesh Plus Biomaterial ePTFE, 20cm x 30cm x 2mmGT210 Dualmesh Plus Biomaterial ePTFE, oval 26cm x 34cm x 2mm
PART A - Prostheses List by Category, Groups and Sponsor Page 99 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Procedure Trays, Surgical
Abbott Australasia Pty LtdAY001 Flexiflo Stomate - low profile Composition - biocompatible silicone. Size: 18 french, length: 2, 2.8, 4.3cm;
Items included in kit/product - 1 low Size 22 french. Length: 1.7, 2.8, 4.3cmprofile stomate gastronomy tube, Obturator, Y port connector with right
AY005 Flexiflo balloon gastrostomy tube Composition - biocompatible silicone. 16 french, 18 french, 20 frenchItems included in kit/product - sliding retention disc and opened edged feeding
Prostheses, Bile Duct
William A Cook Aust Pty LtdWC001 Cotton-Huibregste Biliary Stent Set 7 - 11.5Fr, Length 5 - 15cmWC006 Cotton-Leung Biliary Stent Only 6 - 11.5Fr, Length 3 - 20cmWC008 Cotton-Huibregste Biliary Stent Only 7 - 11.5Fr, Length 5 - 21cmWC010 Zimmon Pancreatic Stent Only 5, 7Fr, Length 6, 10, 12cmWC012 Zimmon Biliary Stent Only 5 - 11.5Fr, Length 3 - 15cmWC013 Zimmon Biliary Stent Set 5 - 11.5Fr, Length 4 - 30cmWC017 Cotton-Leung Biliary Stent Set 7 - 11.5Fr, Length 5 - 18cmWC064 Biliary Stents Tannenbaum and Oasis Introducer Stent: 8.5,10,11.5 Fr. Length Between
Flaps: 5 -->15 cm
WC079 Cook Bile Duct Prostheses Includes Protective Sleeve for French 5.0, length 2, 2.5, 4, 6, 8, 10, Introduction through the Scope 12cm; French 6.0, Length 2, 2.5, 4, 6, 8,
10, 12cm; French 7.0, Length 2, 2.5, 4,
WC080 Cook Bile Duct Prostheses Includes Protective Sleeve for French 5.0, length 1, 2, 4, 6, 8, 10, Introduction through the Scope 12cm; French 7.0, Length 2, 4, 6, 8, 10,
WC106 Cook Bile Duct Prostheses Cotton Leung Biliary Radiopaque Diameter 10mm, length 5, 7, 9, 12, 15cmPolyethylene Stent preloaded in an Oasis Introduction System
PART A - Prostheses List by Category, Groups and Sponsor Page 100 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC107 Cook Bile Duct Prostheses - Geenan Radiopaque Polyethylene Stent Includes Diameter 5, 7mm, length 3, 5, 7, 9, 12cmPancreatic Stent Set Stent, Wireguide and Catheter
WC108 Cook Bile Duct Prostheses - Geenan Radiopaque Polyethylene Stent Set Diameter 5mm, length 3, 5, 7, 9cmPancreatic Stent Set without Flap includes Stent, Wirreguide and Catheter
WC123 Prostheses, Bile Duct Geenen pancreatic stent French 3 - 7, length 3 -12cmWC124 Cook Bile Duct Prostheses Za-Stent endoscopic biliary stent only Dia 10mm, length 4 - 8cm
Prostheses, Esophageal
William A Cook Aust Pty LtdWC007 Cook Esophageal Prostheses Esophageal Z-Stent with uncoated flanges Stent length 8 -14mm, introducer length
70, 100cm
WC068 Esophageal Z Stent Anti-Reflux STENT Flared End Diameter: 25mm Shaft Diameter: 18mm Length: 8,10,12,14cm INTRODUCER French Size: 31.0 (10 mm) Length: 70 cm
Prostheses, Nerve Sheath
LMT Surgical Pty LtdLM017 Neurotube Bioabsorbable nerve conduit made of 2.3mm - 8mm
polyglycolic acid
Prosthesis, Internal, Stent
ev3 Australia Pty LtdEE001 Protégé GPS Self-Expanding Nitinol Stent Nitinol self-expanding stent, disposable 20 - 150mm length, 6 - 12mm diameter
with Starport Delivery System delivery catheter
PART A - Prostheses List by Category, Groups and Sponsor Page 101 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Shunts, Peritoneovenous
Endocorp Pty LtdEC007 Denver Peritoneo-Venous Shunt Pleural Effusion Shunt PAK Pump length 7.5 cm Pump Height 1.0
cm Pump Width 1.7 cm (not including suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
Shunts, Pleuroperitoneal
Endocorp Pty LtdEC002 Denver Pleuro-Peritoneal Shunt Ascites - Single Valved High Flow Rate Pump length 7.5 cm Pump Height 1.0
(36-48ml/min) cm Pump Width 1.7 cm (not including suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
EC003 Denver Pleuro-Peritoneal Shunt Ascites - Single Valved Extra High Flow Pump length 7.5 cm Pump Height 1.0 Rate (48ml/min) cm Pump Width 1.7 cm (not including
suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
EC004 Denver Pleuro-Peritoneal Shunt Ascites - Double Valved Standard Flow Pump length 7.5 cm Pump Height 1.0 Rate (25-40ml/min) cm Pump Width 1.7 cm (not including
suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
EC005 Denver Pleuro-Peritoneal Shunt Double Valved Shunt PAK. Flow Rate Pump length 7.5 cm Pump Height 1.0 (20-35ml/min) cm Pump Width 1.7 cm (not including
suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
EC006 Denver Pleuro-Peritoneal Shunt Single Valved Shunt PAK. Flow Rate Pump length 7.5 cm Pump Height 1.0 (35-48 ml/min) cm Pump Width 1.7 cm (not including
suture pad) Tubing Size: inside diameter 0.27 cm Outside diameter 0.51 cm
PART A - Prostheses List by Category, Groups and Sponsor Page 102 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Sponges, Hemostatic, Absorbable
Johnson & Johnson Medical Pty LtdJJ003 Spongostan Absorbable Haemostat Standard (Box of 20) 70 x 50 x 10mmJJ004 Spongostan Absorbable Haemostat Film (Box of 20) 200 x 70 x 0.5mmJJ005 Spongostan Absorbable Haemostat Special (Box of 20) 70 x 50 x 1mmJJ006 Spongostan Absorbable Haemostat Anal 20s (Box of 20) 80 x 30mmJJ007 Spongostan Absorbable Haemostat Anal 5s (Box of 5) 80 x 30mmJJ008 Surgicel Nu-Knit Absorbable Haemostat Large (Box of 24) 7.5 x 10cmJJ009 Surgicel Fibrillar Absorbable Haemostat Small (Box of 24) 2.5 x 5.1cmJJ012 Surgicel Absorbable Haemostat Large (Box of 24) 5 x 35cm or 10 x 20cmJJ013 Surgicel Absorbable Haemostat Medium (Box of 24) 5 x 7.5cmJJ014 Surgicel Absorbable Haemostat Small (Box of 24) 1.2 x 5cmJJ015 Spongostan Absorbable Haemostat Dental (Box of 24) 10 x 10 x 10mmJJ023 Surgicel Nu-Knit Absorbable Haemostat Small (Box of 24) 2.5 x 2.5cmJJ029 Surgicel Fibrillar Absorbable Haemostat Large (Box of 24) 10.2 x 10.2cmJJ030 Surgicel Fibrillar Absorbable Haemostat Medium (Box of 24) 5.1 x 10.2cmJJ432 SURGICEL Nu knit Absorbable Haemostat High density , oxidised regenerated 1in x 3.5in (2.5cm x 8.75cm)
cellulose, the material is biocompatible and also bactericidal. Box of 10.
JJ433 SURGICEL Nu knit Absorbable Haemostat High density , oxidised regenerated 6in x 9in (15cm x 22.5cm)cellulose, the material is biocompatible and also bactericidal. Box of 10.
Pharmacia Australia Pty LtdPU056 Gelfoam Sterile Sponge Sterile, pliable, nonantigenic surgical Size 12 - 20mm x 60mm x 7mm, packet
sponge prepared from specially treated of 4; Size 100 - 80mm x 125mm x 10mmpurified gelatin solution in individual packet
Taylor Bryant Pty LtdTB134 Curaspon Absorbable Gelatin Sponge CUR-D-101010-50 Dental Cubes, Ster, 10 x 10 x 10mm, Bx /50
Gel Sponge
PART A - Prostheses List by Category, Groups and Sponsor Page 103 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB135 Curaspon Absorbable Gelatin Sponge CUR-D-101010-60 Dental Cubes, Ster, 10 x 10 x 10mm, Bx 2/30Gel Sponge
TB136 Curaspon Absorbable Gelatin Sponge CUR-SP-805001-20 Special 20, Ster, Gel 80 x 50 x 1mm, Bx /20Sponges
TB137 Curaspon Absorbable Gelatin Sponge CUR-ST-1258001-10C Absorb Sterile 100mm, Bx /10Gelatin Sponges
TB138 Curaspon Absorbable Gelatin Sponge CUR-ST-1258010-10 Absorb Sterile 100mm, Bx /10Gelatin Sponges
TB139 Curaspon Absorbable Gelatin Sponge CUR-ST-602007-10 Sterile Gel Sponges 60 x 20 x 7mm, Bx /10TB140 Curaspon Absorbable Gelatin Sponge CUR-ST-602007-10NSHS Special Paper Bx /10
Peel Pack
TB141 Curaspon Absorbable Gelatin Sponge CUR-ST-805010-10 STD 10, Sterile Gel 80 x 50 x 10mm, Bx /10Sponges
TB142 Curaspon Absorbable Gelatin Sponge CUR-ST-805010-10-NSHS Special Paper Bx /10 Peel Pack
TB143 Curaspon Absorbable Gelatin Sponge CUR-T-8030-05 Tampon 5, Anal Ster, 80 x 30mm, Bx /5Gel Sponge
Spring Infusor, Ambulatory
Baxter Healthcare Pty LtdBX246 Infusor Sterile infusor devices, spring or SV Half day, 5ml/hr, 60ml vol. LV 10,
elastomer driven 10ml/hr, 240ml vol. SV Single day, 2ml/hr, 48ml vol. LV 5, 5ml/hr, 240ml
BX247 Intermate Sterile infusor devices, spring or SV 200 - 200ml/hr, 100ml vol. SV 100 - elastomeric driven 100ml/hr, 100ml vol. LV 250, 250ml/hr,
275ml vol. SV 50 - 50ml/hr, 100ml vol. LV 100 - 100ml/hr, 275ml vol. LV 50, 50ml/hr, 275ml vol
BX248 Infusor Sterile infusor devices, spring or LV 2, 2ml/hr, 275 ml vol; LV 1.5, elastomer driven 1.5ml/hr, 275ml vol; SV Multi day,
0.5ml/hr. 60ml vol; SV Seven day,
BX249 Multirate with PCM Sterile infusor devices, spring or Multirate 5, 7 or 12 ml/hr with PCMelastomer driven
PART A - Prostheses List by Category, Groups and Sponsor Page 104 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BX250 Basal/Bolus and Multirate Infusors Sterile infusor devices, spring or Basal/Bolus 60, Basal 0.5ml/hr, Bolus elastomer driven 0.5ml/hr x 65ml; Basal/Bolus 15, Basal
0.5ml/hr, Bolus 2ml/hr x 65ml; Basal/Bolus infusor, Basal 2ml/hr, Bolus 2ml/hr x 65ml; Multirate 5, 7 or 12 ml/hr x 300 ml; Multirate 2, 4, or 6 ml/hr x 300 ml; Multirate 2, 3, or 5 ml/hr x 300 ml; Multirate 1, 2 or 3 ml/hr x 100 ml
Orthocare Pty LimitedOC001 Pain Care 2000 Pain Care 2000 System One size onlyOC002 Pain Care 2000 "Y" Accessory Kit One size only
Orthotech Pty LtdOH065 PC2000 Pain Control Infusion Pump Plastic spring loaded drug delivery device 0.5 ml - 4 mlOH122 PC2000 Pain Control Infusion Pump Plastic spring loaded drug delivery device 0.5ml - 4ml
Connector
Stryker Australia Pty LtdSK119 Stryker PainPump Vacuum operated pump providing 120ml Infuser
controlled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
SK120 Stryker PainPump Vacuum operated pump providing 120ml Unit Base Infusion Kitscontrolled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
SK121 Stryker PainPump Vacuum operated pump providing 120ml unit 1-7 Day Infusion Kitscontrolled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
SK122 Stryker PainPump Vacuum operated pump providing 120ml unit Two Pump 2-4 Day Infusion controlled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
SK123 Stryker PainPump Vacuum operated pump providing 270ml unit 1-7 Day Infusion Kitscontrolled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
PART A - Prostheses List by Category, Groups and Sponsor Page 105 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK124 Stryker PainPump Vacuum operated pump providing 270ml unit Base Infusion Kitscontrolled infusion of a Local Anaesthetic directly into a surgical site for post-operative pain management.
SK125 Stryker PainPump Vacuum operated pump providing 75-150mm Extra Fenestration Infusion controlled infusion of a Local Anaesthetic Catheters directly into a surgical site for post-operative pain management.
Staples, Tissue
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS091 VERSA TACK* stapler Titanium Surgical Stapler 4, 4.8mm (10 staples) Temporary Approval
Stents
Bard Australia Pty LtdBA088 Memotherm Stents Colorectal, Nitinol, Self-expanding 25-30mm D, 60-100mm Length
Boston Scientific Pty LtdBS053 Wallstent Enteral Endoprosthesis Enteral Endoprosthesis Wallstent with 18mm x 60mm, 18mm x 90mm, 20mm x
Delivery System:Monofilament wire, self- 60mm, 20mm x 90mm, 22mm x 60mm, expanding 22mm x 90mm
William A Cook Aust Pty LtdWC100 Colonic Z Stent with Introduction System Composition of Stent Stainless Steel, Dia 25mm, length 4, 6, 8, 10, 12cm
includes Stent Introducer Set
Stents, Biliary
Boston Scientific Pty LtdBS045 Microvasive Ultraflex Diamond Self expanding, nitinol metallic stent Length: 4cm, 6cm, 8 cm x 10mm
Expandable Biliary Stent
BS050 Stent (Billiary Wallstent) Wallstent (Non-covered): Monofilament 10mm x 56 to 62 mm, 10mm x 78 to 86 wire, self-expanding mm, 10mm x 101 to 111mm
PART A - Prostheses List by Category, Groups and Sponsor Page 106 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BS055 Rapid Exchange Biliary Stent System Flexima Polyurethane with Glidex Diameter 7 FR - 11.5 FR, length 5 - Hydrophilic Coating, System includes Stent, Guide Catheter and Push Catheter
Device Technologies Australia Pty LtdDE209 Endocoil Billary Stent Nickel Titanium Alloy 5cm, 6cm, 7cm
Endotherapeutics Pty LtdET018 Optimed Biliary Sinus Stent Nickel Titanium Alloy 4-12 x 30-100mmET019 Sinus-Flex Vascular-Biliary Stent Nickel Titanium Alloy 4-12 x 40-80mmET020 Sinus-Endoflex-Biliary Sinus Stent Nickel Titanium Alloy 40 x 7,8,9,10 mm; 60 x 7,8,9,10 mm; 80
x 7,8,9,10 mm
Olympus AustraliaOL003 Bile Duct Stent Fluorinated Ethylene Propylene 8Fr., 3cm ~ 12Fr., 15cm 8Fr., 5cm ~
12Fr., 15cm
OL004 Bile Duct Stent Fluorinated Ethylene Propylene 10Fr., 4 ~15cm, 10Fr., 3 ~15cmOL005 Bile Duct Stent Fluorinated Ethylene Propylene 10Fr.~14Fr. , 3~15cm
W L Gore & AssociatesGT116 Gore Biliary Endoprostheses ePTFE Short or Long Catheter 8-10mmx4-8cm
William A Cook Aust Pty LtdWC016 Cook Biliary Stents Gianturco-Rösch Biliary Design Single, triple and five bodyWC062 Biliary Stents Miller Set (UBSS-MLR). Double Pigtail Stent: 10,12,14 Fr Stent Length: 2.5,5,7.5
Stent for Drainage of bile from the cm Positioner Length: 25cm.Common Duct into the Duodenum
WC078 Cook Biliary Stents Composition Plastic, includes Stent, French 7.0, length 4cmWireguide & Positioner
Stents, Bronchial
Boston Scientific Pty LtdBS047 Ultraflex Tracheobronchial Stent Self expanding, nitinol metallic stent, Diameter 8mm - 20mm, Length 20mm -
covered and non-covered 80mm
N Stenning & Co Pty LtdNG034 Dynamic Stent Silicone and stainless steel tracheo- 11, 13, 15 tracheal limb 11.5, 13.5,
bronchial stent 15.5mm; 11, 13, 15 bronchial limb 8, 10,
PART A - Prostheses List by Category, Groups and Sponsor Page 107 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tag MedicalTM035 Alveolus Alveolus stent is laser formed from a 10mm x 20, 30, 40mm. 12mm x 20, 30,
cylindrical tube of NiTinol, a compination 40mm. 14mm x 20, 30, 40mm. 16mm x of nickel and titanium kown for shape 40, 60, 80mm. 18mm x 40, 60, 80mmmemory and super-elasticity. These are 100% covered with biocompatible
Stents, Esophageal
Boston Scientific Pty LtdBS046 Microvasive Ultraflex Oesophageal Stents Self expanding, nitinol metallic stent Stent Outer Diameter - Distal Release:
(covered and non-covered) 17mm to 22mm, 18mm to 23mm, 23mm to 28mm Proximal Release: 17mm to 22mm, 18mm to 23mm, 23mm to 28mm
BS048 Covered Oesophageal Wallstent Wallstent Esophageal II Endoprosthesis: (Lengths up to 11cm): 100mm, Diameter:Monofilament wire, self-expanding 20-28mm
BS049 Covered Oesophageal Wallstent Flamingo Wallstent, Wallstent Esophageal (Lengths over 11cm): Flamingo: 120mm II Endoprosthesis: Monofilament wire, x 16-24mm (Diameter), 140mm x 20-self-expanding 30mm (diameter), Wallstent Esophageal
II Endoprosthesis: 150mm x 20-28mm (diameter)
BS051 Stent (Non-Vascular) Wallstent (Non-covered): Monofilament 8mm x 40mm, 8mm x 60mm, 8mm x wire, self-expanding 80mm, 10mm x 42mm, 10mm x 68mm,
10mm x 80mm
BS052 Stent (Non-Vascular) Wallstent (Covered): Monofilament wire, 10mm x 40mm, 10mm x 60mm, 10mm xself-expanding 80mm
Device Technologies Australia Pty LtdDE210 Esophacoil Oesophageal Stent Coiled Nitinol-Used for oesophageal and 100 x 16mm, 150 x 16mm, 100 x 18mm,
rectal 150 x 18mm
DE211 Esophacoil Stent Coiled Nitinol 100 x 16mm, 150 x 16mm, 100 x 18mm, 150 x 18mm
Endotherapeutics Pty LtdET001 Ferx Ella Esophageal Stent Kit includes esophageal stent, introducer, Diam 20mm, Length 80 - 160mm
balloon catheter
PART A - Prostheses List by Category, Groups and Sponsor Page 108 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
William A Cook Aust Pty LtdWC066 Covered Esophageal Stent Expanded Stent Medial Outer Diameter:
18mm Proximal and Distal Outer Diameter: 25 mm Stent Length: 10,12,14
WC081 Cook-Z-Stent Includes Introducer Set Dia 18mm, length 6cmWC082 Cook-Z-Stents Includes Introducer Set Dia 18mm, Length 8cmWC083 Cook-Z-Stent Includes Introducer Set Dia 18mm, length 10cmWC084 Cook-Z-Stent Includes Introducer Set Dia 18mm, length 12cmWC085 Cook-Z-Stent Includes Introducer Set Dia 18mm, length 14cmWC182 Esophageal EZS Stents Polyurethane Uncoated Flange Esophageal Stent with 8, 10, 12, 14cm
Z-Speed TM Introducer
Stents, Tracheal
N Stenning & Co Pty LtdNG033 Polyflex Stent with Introducer System Polyflex Stent for Oesophagus - self One size only
expanding stent, composition silicone with polyester mesh, System includes polyflex stent, introducer sleeve, stent loader, insertion tube with dilator, soft positioner, stopper & stent clamp; Polyflex Stent for Trachea or Bronchus - self expanding stent, composition silicone with polyester mesh, System includes polyflex stent, introducer sleeve, stent loader/positioner & stopper
Stents, Ureteral
Boston Scientific Pty LtdBS054 Flexima Biliary Stent System Flexima Polyurethane with Glidex Dia 7 FR - 11.5 FR, length 5 - 15cm
Hydrophilic Coating, System includes Stent, Guide Catheter and Push Catheter
PART A - Prostheses List by Category, Groups and Sponsor Page 109 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Sutures, Polypropylene Monofilament
B Braun Australia Pty LtdBB088 Premilene Mesh Polypropylene 2.5x10cmBB089 Premilene Mesh Polypropylene 4.5x9.5cmBB090 Premilene Mesh Polypropylene 4.5x10cmBB091 Premilene Mesh Polypropylene 5x10 cmBB092 Premilene Mesh Polypropylene 5x30cmBB093 Premilene Mesh Polypropylene 6x12.5cmBB094 Premilene Mesh Polypropylene 6x13.5cmBB095 Premilene Mesh Polypropylene 7.5x7.5cmBB096 Premilene Mesh Polypropylene 7.5x12.5cmBB097 Premilene Mesh Polypropylene 7.5x15cmBB098 Premilene Mesh Polypropylene 10x10cmBB099 Premilene Mesh Polypropylene 10x12.5cmBB100 Premilene Mesh Polypropylene 10x15cmBB101 Premilene Mesh Polypropylene 15x15cmBB102 Premilene Mesh Polypropylene 26x36cmBB103 Premilene Mesh Polypropylene 30x30cmBB104 Premilene Mesh Self Forming Plug One size only
Tissue Reconstructive Materials
Advanced Biomedical Pty LtdAB003 Bioglue Surgical Adhesive - 5ml Starter Kit Model No BG 3005 S (Bioglue Surgical One size only Temporary Approval
Adhesive)
AB004 Bioglue Surgical Adhesive - 10ml Starter Model No BG 3010 S (Bioglue Surgical One size only Temporary ApprovalAdhesive)
PART A - Prostheses List by Category, Groups and Sponsor Page 110 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AB005 Bioglue Surgical Adhesive - 5ml Solutions Model No BG 3005-5 (Bioglue Surgical One size only Temporary Approval Cartridge Shelf Box: 5 pack Adhesive)
AB006 Bioglue Surgical Adhesive - Applicator Model No BGAT-20 (Bioglue Surgical One size only Temporary ApprovalTip Extender Adhesive)
AB007 Bioglue Surgical Adhesive - 10ml Model No BG 3010-5 (Bioglue Surgical One size only Temporary ApprovalSolutions Cartridge Shelf Box: 5 pack Adhesive)
AB008 Bioglue Surgical Adhesive - Standard Model No BGAT (Bioglue Surgical One size only Temporary ApprovalApplicator Tip
AB009 Bioglue Surgical Adhesive - Applicator Model No BGAT-10 (Bioglue Surgical One size only Temporary ApprovalTip Extender Adhesive)
AB010 Bioglue Surgical Adhesive - Applicator Model No BGAT-27 (Bioglue Surgical One size only Temporary ApprovalTip Extender Adhesive)
AB011 Bioglue Surgical Adhesive - 2ml Solutions Model No BG3002-5 (Bioglue Surgical One size only Temporary Approval Cartridge Shelf Box: 5 pack Adhesive)
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS096 SepraMesh Biosurgical Composite SMBC-360 3 x 6 inchAS097 SepraMesh Biosurgical Composite SMBC-480 4 x 8 inchAS098 SepraMesh Biosurgical Composite SMBC-680 6 x 8 inchAS099 SepraMesh Biosurgical Composite SMBC-812 8 x 12 inch
Baxter Healthcare Pty LtdBX213 TISSEEL Duo 500 Two Component Active ingedients:Sealer Protein Solution 0.5 ml (containing 0.5 ml of Sealer Temporary approval
Fibrin Sealant Syringe & Thrombin Solution - deep-frozen, Protein Solution and 0.5 ml of Thrombin steam treated
BX214 TISSEEL Duo 500 Two Component Active ingedients:Sealer Protein Solution 1.0 ml (containing 1.0 ml of Sealer Temporary approvalFibrin Sealant Syringe & Thrombin Solution - deep-frozen, Protein Solution and 1.0 ml of Thrombin
steam treated
BX215 TISSEEL Duo 500 Two Component Active ingedients:Sealer Protein Solution 2.0 ml (containing 2.0 ml of Sealer Temporary approvalFibrin Sealant Syringe & Thrombin Solution - deep-frozen, Protein Solution and 2.0 ml of Thrombin
steam treated
BX216 TISSEEL Duo 500 Two Component Active ingedients:Sealer Protein Solution 5.0 ml (containing 5.0 ml of Sealer Temporary approvalFibrin Sealant Syringe & Thrombin Solution - deep-frozen, Protein Solution and 5.0 ml of Thrombin
steam treated
PART A - Prostheses List by Category, Groups and Sponsor Page 111 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Incision Pty LtdIP007 Durasphere FL Composition: Pyrolitically carbon coated Syringe 1ml
silica bead in an aqueous gel. Injectable bulking agent for the treatment of Faecal Incontinence. Syringe plus needle.
IP008 Durasphere FL Composition: Pyrolitically carbon coated Syringe 3mlsilica bead in an aqueous gel. Injectable bulking agent for the treatment of Faecal Incontinence. Syringe plus needle.
Tissue Reconstructive Materials, Solid
W L Gore & AssociatesGT001 GORE - Seamguard Staple Line 1pair of sleeves ePTFE One Size Only Temporary Approval
Reinforcement Material
GT065 Gore-Tex ePTFE Mycro-Mesh ePTFE 1mm Thickness 2.5 x 10cmGT066 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness 5 x 10cm (Rectangle), 5
x 10cm (Key Hole)
GT067 Gore-Tex Mycro-Mesh ePTFE 1mm Thickness 5 x 13cm (Configured for Vaginal Prolapse), 5 x 15cm
GT068 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness 18 x 24cmGT069 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness 20 x 30cmGT070 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness Oval 26 x 34cmGT071 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness Oval 10 x 15cmGT072 Gore-Tex Mycro-Mesh Biomaterial ePTFE 1mm Thickness Oval 15 x 19cmGT074 Gore-Tex Mycro-Mesh Biomaterial Configured for Inguinal Hernia repair 1mm Thickness 6cm x 12cmGT092 Gore-Tex Dual Mesh ePTFE 1mm Thickness 7.5 x 10cmGT093 Gore-Tex Dual Mesh ePTFE 1mm Thickness 8 x 12cmGT094 Gore-Tex Dual Mesh ePTFE 1mm Thickness Oval 10 x 15cmGT095 Gore-Tex Dual Mesh ePTFE 1mm Thickness Oval 15.0 x 19.0cmGT096 Gore-Tex Dual Mesh ePTFE 1mm Thickness 18 x 24cmGT097 Gore-Tex Dual Mesh ePTFE 1mm Thickness 20 x 30cm
PART A - Prostheses List by Category, Groups and Sponsor Page 112 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT098 Gore-Tex Dual Mesh ePTFE 1mm Thickness Oval 26 x 34cmGT099 Gore-Tex Dual Mesh ePTFE 2mm Thickness Oval 10 x 15cmGT100 Gore-Tex Dual Mesh ePTFE 2mm Thickness Oval 15 x 19cmGT101 Gore-Tex Dual Mesh ePTFE 2mm Thickness 18 x 24cmGT102 Gore-Tex Dual Mesh ePTFE 2mm Thickness 20 x 30cmGT103 Gore-Tex Dual Mesh ePTFE 2mm Thickness Oval 26 x 34cmGT217 Seamguard Staple Line Reinforcement 1 pair of sleeves ePTFE with self- Ethicon Endo-Surgery ETS45, USS Endo Temporary approval
Material adhesive loading and pre-trimmed sizes GIA II 45-4.8, USS Endo GIA II 60-4.8
Tubes, Gastrointestinal
Boston Scientific Pty LtdBS075 Initial Enteral Feeding Kits (EndoVive): Composition: silicone. Kits include Stoma Initial Enteral Feeding Kit: 18 to 24 Fr
Gastrodome Initial Gastrostomy Kit; One- devices, Gastrostomy/Jejunostomy tube Step Button Initial Placement and patient care devicesGastrostomy Kit; Thru-The-Peg J Tube
BS076 Replacement Enteral Feeding Devices Composition: silicone. Replacement Enteral Feeding Devices: 12 (EndoVive): Button Low-Profile to 28 FrReplacement Gastrostomy Tube, Mini
Tubes, Gastrostomy, Other
Kimberly-Clark Australia Pty LtdKI006 Kimberly-Clark MIC* Transgastric- Medical Grade Silicone Construction, 16-22 French - 45cm jejunal length - 7-
Jejunal Feeding Tubes (Surgical Silicone Internal Retention Balloon, 10ml balloonSECUR-LOK* External Retention ring, Universal Jejunal Feeding Port Connector, Gastric Decompression Port, Multiple Gastric & Jejunal Exit Ports, Tungsten Weighted Jejunal Portion, Tapered Distal Tip, Radiopaque Stripe, Sterile
William A Cook Aust Pty LtdWC199 Cook Gastronomy Tubes Russell Gastronomy Set 14fr, 17cm
PART A - Prostheses List by Category, Groups and Sponsor Page 113 of 666
GENERAL/MISCELLANEOUS Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tubing, Other
N Stenning & Co Pty LtdNG036 SprayGel Air Assisted Sprayer SK-A-6001 SprayGel Sprayer Kit; AK-A- One size only; AK-A-4210 - 5 Temporary approval -
4210 SprayGel Open Surgery Applicator Applicators/Box funded when clinical indications for use are present.
PART A - Prostheses List by Category, Groups and Sponsor Page 114 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Applicators, Clip
Johnson & Johnson Medical Pty LtdJJ186 Ligaclip Endoscopic Multiclip Applier Metal/plastic stapler with titanium clips 10-12mm shaft diameter Temporary ApprovalJJ187 Ligaclip Allport 5mm Clip Applier Metal/plastic stapler with titanium clips 5mm shaft diameter Temporary Approval
Applier, Haemostatic Clip, Reusable
Linvatec AustraliaLV087 Permaclip Multi-use Reposable Supplied sterile with a cartridge medium/large Temporary Approval,
Endoscopic Clip Applier containing medium and large titanium pending review of clips, with a reposable handle validated product group
Appliers
EMT Healthcare Pty LtdEM014 Microline Multi-Fire Clips Microline M/L-10 Endoscopic Clip 10mm x 10 clip cartridges
Applier with reusable handpiece and disposable Medium/Large Titanium Clip
Appliers, Hemostatic Clip, Disposable
EMT Healthcare Pty LtdEM013 Microline Clip Applier Multi-Fire Clips The Microline M/L-10 Endoscopic Clip 10 mm instrument Temporary approval
Applier has a reusable handpiece and a disposable 19 Medium/Large Titanium Clip Slide Cartridge
PART A - Prostheses List by Category, Groups and Sponsor Page 115 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clip Appliers
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS006 Ligation Clips - Disposable clip applier Premium Surgiclip* Small, medium & large clips Temporary Approval
and ligating clips
EMT Healthcare Pty LtdEM012 Surgicon Ligation System The Surgicon SpringLock II Ligation 5 mm instrument Temporary approval
Sysytem has a 5mm shaft and contains 10 medium-large titanium ligators.
Johnson & Johnson Medical Pty LtdJJ037 Ligaclip* Multiple Clip Applier Metal/plastic applier preloaded with 3-12 mm; 20 clips per applier Temporary Approval
titanium clips
JJ038 Ligaclip* Multiple Clip Applier Metal/plastic applier preloaded with 3-12 mm; 30 clips per applier Temporary Approvaltitanium clips
JJ039 Ligaclip* Multiple Clip Applier Metal/plastic applier preloaded with 5; 20 clips per applier Temporary Approvaltitanium clips; reloadable
Medtel Australia Pty LtdME089 Surgical Dynamics Duraclose Clip Applier Clip Applier Med / Large / X-Large Temporary Approval
Clips
Sherwood Davis & Geck T/A Tyco Healthcare Pty Ltd SG005 Ligation clip applier reload Bioabsorbable One size only Temporary ApprovalSG006 Laproclip Bioabsorbable Medium/Large, 6 clips Temporary ApprovalSG007 Laproclip Bioabsorbable Medium/Large, 2 clips Temporary ApprovalSG008 Laproclip Bioabsorbable Large, 6 clips Temporary ApprovalSG009 Laproclip Bioabsorbable Large, 2 clips Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 116 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clips, Hemostatic
Device Technologies Australia Pty LtdDE004 SLS Clips Titanium, (24 Clips) Small - Large Temporary ApprovalDE005 SLS Clips Titanium composition Small, Medium, Large; Height 3.6 - Temporary Approval
9mm, Width 4.2 - 8.4mm
DE098 SLS Clips Titanium Clips Medium to large Temporary ApprovalDE206 SLS Clips Titanium Micro, Height 2.6mm, Width 3.1mm Temporary approval
Johnson & Johnson Medical Pty LtdJJ033 Ligaclip* Ligating Clips - titanium Titanium clips contained in a plastic 3-5mm; 6 clips per cartridge Temporary ApprovalJJ034 Ligaclip* Ligating Clips - titanium Titanium clips contained in a plastic 9-12 mm; 6 clips per cartage Temporary ApprovalJJ035 Ligaclip* Ligating Clips - titanium Titanium clips contained in a plastic 3-5 mm; 15 clips per cartage Temporary ApprovalJJ036 Absolok* Extra Absorbable Ligating Clips Polydioxanone clips contained in a plastic 3-12 mm Temporary Approval
cartridge
JJ040 Ligaclip* 20/20 Reload Unit Metal reload cartridge containing titanium 5 mm; 20 clips Temporary Approvalclips
Clips, Ligating
Linvatec AustraliaLV085 Permaclip Replacement Cartridge sterile, single use, containing 10 titanium medium/large Temporary Approval,
pending review of product group
LV086 Reflex 5mm Automatic Clip Applier Autofeeding disposable clip applier. medium/large Temporary Approval, Contains 15 non absorbable polymer pending review of
product group
PART A - Prostheses List by Category, Groups and Sponsor Page 117 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Cutters
Johnson & Johnson Medical Pty LtdJJ188 Endopath Linear Cutter Metal/plastic cutter-stapler with titanium 45mm; short shaft Temporary Approval
staples
JJ189 Endopath Linear Cutter Metal/plastic cutter-stapler with titanium 45mm; long shaft Temporary Approvalstaples
JJ191 Endopath Linear Cutter Metal/plastic cutter-stapler with titanium 35mm Temporary Approvalstaples
Mesh, Polymeric
Morton Surgical Pty LtdMG001 Aspide Surgimesh Monofilament polypropylene AS 59611p - 6 x 11cm Thread 0.14mm MG004 Aspide Surgimesh Monofilament polypropylene AS 2812p - 8 x 12cm Thread 0.14mm MG005 Aspide Surgimesh Monofilament polypropylene AS 31013p - 10 x 13cm Thread 0.14mm
Box/5
MG006 Aspide Surgimesh Monofilament polypropylene AS 511015p - 10 x 15cm Thread 0.14mm Box/5
MG007 Aspide Surgimesh Monofilament polypropylene AS 41515p - 15 x 15cm Thread 0.14mm Box/5
MG008 Aspide Surgimesh Monofilament polypropylene E33Lg - Easyplug Large Box/5MG009 Aspide Surgimesh Monofilament polypropylene E33mg - Easyplug Medium Box/5MG010 Aspide Surgimesh Monofilament polypropylene E33Sgp - Easyplug Small Box/5
Staples, Tissue
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS010 GIA*, ILA* Staplers Titanium 50 - 60mm (2.5mm, 3.8mm) Temporary ApprovalAS011 GIA*, ILA* Staplers Titanium 75mm (3.8mm, 4.8mm) Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 118 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AS012 GIA* Reloading Unit Titanium. Multifire 60 Cartridge, 90 50-60mm (2.5, 3.8mm) Temporary ApprovalPremium Disposable Loading Unit with Titanium Staples, 50 Premium Disposable Loading Unit with Titanium Staples, Inverted Linear Anastomosis Cartridges 3944, 3943, 3978, 3946, 3945,
AS013 ILA* 52 Reloading Unit Titanium. Multifire 60 Cartridge 90 50 - 60mm (2.5mm, 3.8mm) Temporary ApprovalPremium Disposable Loading Unit with Titanium Staples, 50 Premium Disposable Loading Unit with Titanium Staple, Inverted Linear Anastomosis Cartridges 3944, 3943, 3978, 3946, 3945,
AS014 GIA*, ILA* Reloading Unit Inverted Linear Anastomosis Cartridges 75mm (3.8mm, 4.8mm) Temporary Approval3944, 3943, 3978, 3946, 3945, 3976, 3977. Titanium. Multifire 60 Cartridge
AS015 GIA*, ILA* Reloading Unit Inverted Linear Anastomosis Cartridges 80mm (3.8, 4.8mm) Temporary Approval3944, 3943, 3978, 3946, 3945, 3976, 3977, Titanium. Multifire 60 Cartridge
AS016 GIA*, ILA* Reloading Unit Titanium. Multifire 60 Cartridge, 90mm (3.8, 4.8mm) Temporary ApprovalInverted Linear Anastomosis Cartridges 3944, 3943, 3978, 3946, 3945, 3976, 3977
AS017 GIA*, ILA* Reloading Unit Titanium. Multifire 60 Cartridge, Inverted 100mm (3.8,4.8mm) Temporary Approval Linear Anastomosis Cartridges 3944, 3943, 3978, 3946, 3945, 3976, 3977
AS018 TA* Stapler; DST Series* Linear Staplers Premium Multifire TA* Disposable 30mm (2.5, 3.5, 4.8mm); DST TA45- Temporary ApprovalSurgical Stapler and Loading Unit; 3.5; DST TA45-4.8; DST TA60-3.5; Titanium staples used for hemostatic DST TA60-4.8; DST TA30-3.5; DST closure of specific organs and blood TA30-4.8; DST TA30V3.vessels (ex bowel, stomach and lung).
AS019 PI*, Stapler Premium Multifire TA* Disposable 30mm (2.5, 3.5, 4.8mm) Temporary ApprovalSurgical Stapler and Loading Unit
AS025 TA* Reloading Units; DST Series* Linear Premium Multifire TA* Disposable 30mm (2.5, 3.5, 4.8mm); DST TA90-3.5 Temporary Approval Stapler Disposable Loading Units Surgical Stapler and Loading Unit; DLU; DST TA90-4.8 DLU; DST TA45-
Titanium staples used for hemostatic 3.5 DLU; DST TA45-4.8 DLU; DST closure of specific organs and blood TA60-3.5 DLU; DST TA60-4.8 DLU; vessels (ex bowel, stomach and lung) DST TA30-3.5 DLU; DST TA30-4.8
DLU; DST TA30V3 DLU.
AS026 PI*, Reloading Unit Premium Multifire TA* Disposable 30mm (2.5, 3.5, 4.8mm) Temporary ApprovalSurgical Stapler and Loading Unit
PART A - Prostheses List by Category, Groups and Sponsor Page 119 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AS030 TA* Reloading Units Premium Multifire TA* Disposable 90mm (3.5mm, 4.8mm) Temporary ApprovalSurgical Stapler and Loading Unit
AS033 Power Stapler and Staples (Powered LDS Instrument & Cartridges One size only Temporary Approval(Disposable Loading Unit)
AS035 Roticulator* Roticulator 30 30mm (3.5, 4.8mm) Temporary ApprovalAS036 Roticulator* Roticulator 55 55mm (3.5, 4.8mm) Temporary ApprovalAS037 ROTICULATOR* Polysorb 55 Disposable Loading Unit 55mm (3.5, 4.8mm) Temporary ApprovalAS072 Staples and Disposable Stapler Applier Titanium, curved, PPCEEA*; Titanium 21-34mm; 21, 25, 28, 31, 34mm. Temporary Approval
and staples; PPCEEA*. Surgical Stapler.
AS075 ENDO TA* Titanium Surgical Stapler 30mm Temporary ApprovalAS094 GIA*, ILA* Staplers Titanium 80mm (3.8mm, 4.8mm) Temporary Approval. *
Trademark of United States Surgical Corporation
AS102 DST Series* Linear Staplers Titanium staples used for hemostatic DST TA90-3.5; DST TA90-4.8 Temporary approvalclosure of specific organs and blod vessels (ex bowel, stomach and lung)
AS110 DFS Disposable Fascia Stapler Stainless Steel One Size Only Temporary ApprovalAS113 DST Series* GIA* Linear Cutter Stapler single use, reloadable stapler 60mm length: sizes 2.5mm, 3.8mm, 4.8mm Temporary approval,
and single use loading units pending review of product group
AS114 DST Series* GIA* Linear Cutter Stapler Single Use Loading Units 60mm length: Sizes 2.5mm, 3.8mm, Temporary approval, and single use loading units pending review of
product group
AS115 DST Series* GIA* Linear Cutter Stapler Single use, reloadable stapler 80mm length; Sizes 3.8 and 4.8mm Temporary approval, and single use loading units pending review of
product group
AS116 DST Series* GIA* Linear Cutter Stapler Single Use Loading Units 80mm length: Sizes 3.8 and 4.8mm Temporary approval, and single use loading units pending review of
product group
AS117 DST Series* GIA* Linear Cutter Stapler Single use, reloadable stapler 100mm length: Sizes 3.8 and 4.8mm Temporary approval, and single use loading units pending review of
product group
AS118 DST Series* GIA* Linear Cutter Stapler Single use loading units 100mm length: Size 3.8 and 4.8mm Temporary approval, and single use loading units pending review of
product group
PART A - Prostheses List by Category, Groups and Sponsor Page 120 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AS119 DST Series* EEA* Circular Stapler Circular staplers 21mm to 33mm Temporary approval, pending review of product group
Johnson & Johnson Medical Pty LtdJJ056 Proximate Articulating Linear Stapler Articulating linear stapler preloaded with 55mm Temporary Approval
titanium staples
JJ190 Endopath ETS Linear Cutter reload Titanium staple cartridge 45mm Temporary ApprovalJJ192 Endopath ETS Linear Cutter reload Titanium staple cartridge 35mm Temporary Approval
Surgical Procedure Kit
Johnson & Johnson Medical Pty LtdJJ443 Proximate Intraluminal Stapler PPH Proximate Hemorrhoidal Circular Stapler One Size Only
Suture Units, Automatic
Johnson & Johnson Medical Pty LtdJJ041 Proximate* Intraluminal Stapler Metal/plastic circular straight stapler 21 - 33 mm Temporary Approval
preloaded with titanium staples
JJ042 Proximate* Intraluminal Stapler Metal/plastic circular curved stapler 21 - 33mm Temporary Approvalpreloaded with titanium staples
JJ043 Proximate* Linear Cutter with Staples Metal/Plastic linear cutter preloaded with 50 - 60mm Temporary Approvaltitanium staples
JJ044 Proximate* Linear Cutter with Staples Metal/Plastic linear cutter preloaded with 75 - 80mm Temporary Approvaltitanium staples
JJ045 Proximate* Linear Cutter with Staples Metal/Plastic linear cutter preloaded with 100mm Temporary Approvaltitanium staples
JJ046 Proximate* Linear Cutter Staple Reload Plastic linear cutter reload cartridge 50 - 60mm Temporary Approvalcontaining titanium staples
JJ047 Proximate* Linear Cutter Staple Reload Plastic linear cutter reload cartridge 75 - 80mm Temporary Approvalcontaining titanium staples
JJ048 Proximate* Linear Cutter Staple Reload Plastic linear cutter reload cartridge 100mm Temporary Approvalcontaining titanium staples
PART A - Prostheses List by Category, Groups and Sponsor Page 121 of 666
MECHANICAL INTERNAL WOUND Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ049 Proximate* Linear Stapler Metal/Plastic linear stapler preloaded with 30mm Temporary Approvaltitanium staples
JJ050 Proximate* Linear Stapler Metal/Plastic linear stapler preloaded with 55 - 60mm Temporary Approvaltitanium staples, manual closure
JJ051 Proximate* Linear Stapler Metal/Plastic linear stapler preloaded with 55 - 60mm Temporary Approvaltitanium staples, automatic closure
JJ052 Proximate* Linear Stapler Metal/Plastic linear stapler preloaded with 90mm Temporary Approvaltitanium staples
JJ053 Proximate* Linear Stapler Reload Unit Plastic linear stapler reload cartridge 30mm Temporary Approvalcontaining titanium staples
JJ054 Proximate* Linear Stapler Reload Unit Plastic linear stapler reload cartridge 55 - 60mm Temporary Approvalcontaining titanium staples
JJ055 Proximate* Linear Stapler Reload Unit Plastic linear stapler reload cartridge 90mm Temporary Approvalcontaining titanium staples
JJ184 Endopath Multi Stapler Endoscopic titanium stapler with staples 11mm shaft diameter Temporary Approval
Medtel Australia Pty LtdME090 S.D.sorb Meniscal Stapler Bioabsorbable Meniscal Repair One Size / 6 Staples Temporary Approval
Suture Units, Other
Medtel Australia Pty LtdME107 Superstitch Suture Mediated Closure Device Sheath sizes: 6F and 8F Temporary Approval
PART A - Prostheses List by Category, Groups and Sponsor Page 122 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Anchor, Fixation
Medtronic Australasia Pty LtdMC094 Stimulator Accessory Kit - Pisces Quad; Model 3550-10 revision kit. 1 x boot, 1 x One size only When used in pain
Pisces Z Lead Revision Kit; Pisces Quad twistlock anchor, 2 x silicone anchors, 1 therapy - to be funded Revision Kit; Octad Revision Kit x hex wrench, 1 x epidural needle 15 when the patient has
gauge, 1 x percutaneous extension (inline) undergone a multi- with set screws, 1 x ball-tipped (bent) disciplinary assessment 28cm stylet for Pisces-Quad lead, 1 x and trial of stimulation.ball-tipped (straight) 28cm stylet for Pisces-Quad lead, 1 x screening cable, 1 x short stylet, 1 x tunnelling guide, 1 x tunnelling guide tip. Silicone, polycarbonate, polyurethane, titanium, stainless steel; 3550-22 & 3550-23 Curved steering stylets, Epidural Needle, Guide Wire, Straight Steering Stylets, Torque Wrench, Percutaneous Extension, Connector Boot, PERCUPASS II Tunneling Tool & Tunneling Tip, Short Stylet, Twist-Lock Screening Cable, Passing Straw, Anchors; Model - 3550-R33 - Pisces Quad revision kit with 33cm stylet; Model 3550-ORK - Octad
Medtronic Sofamor Danek Australia Pty LtdSD216 Invisx Locks Invisx polymer cranial fixation system Single packSD217 Invisx Locks Invisx polymer cranial fixation system 2 pack
Barrier, Absorbable, Adhesion Prevention
Global Scientific Pty LtdGS199 DuraGen Dural Graft Matrix Collagen 2.5 x 2.5cmGS200 DuraGen Dural Graft Matrix Collagen 2.5 x 7.5cmGS201 DuraGen Dural Graft Matrix Collagen 5 x 5cmGS202 DuraGen Dural Graft Matrix Collagen 7.5 x 7.5cmGS203 DuraGen Dural Graft Matrix Collagen 10 x 12.5cm
PART A - Prostheses List by Category, Groups and Sponsor Page 123 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Sofamor Danek Australia Pty LtdSD257 Medishield Medishield is a co-polmer gel composed 3cc Syringe Temporary approval -
of carboxymethylcellulose and funded when clinical indications are present.
Bone Matrix Implants, Artificial
Medtronic Sofamor Danek Australia Pty LtdSD265 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 1.8mm x 3-8mmSD266 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 100mm x 100mm x 0.75mmSD267 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 60mm x 80mm x 0.75mmSD268 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 50mm x 50mm 0.75mmSD269 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 25mm x 25mm x 0.75mmSD270 Macropore FRP (fast resorbing polymer) Polylactide and Polyglycolide polymer 2.1mm x 3-8mm
screw
Cables/Leads, Other
Advanced Neuromodulation Systems Australia Pty LtdAV001 ANS Spinal Cord Stimulation System Lead Extension 10cm, 20cm, 30cm When used in pain
therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV002 ANS Spinal Cord Stimulation System Octrode Lead. 8 Electrode (thoracic or 30cm, 60cm When used in pain cervical placement). therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 124 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AV003 ANS Spinal Cord Stimulation System Quattrode Lead. 4 Electrode. 30cm, 60cm When used in pain therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV007 ANS Spinal Cord Stimulation System Trial Lead. Temporary Screening Lead 30cm, 60cm When used in pain therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV011 ANS Spinal Cord Stimulation System Lamitrode Plate Electrode Lead One size only When used in pain therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV012 ANS Spinal Cord Stimulation System Lamitrode Dual 8 Plate Electrode Lead One size only When used in pain therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
Catheters, Cerebrospinal
Johnson & Johnson Medical Pty LtdJJ160 Hakim Ventricular Catheter with Bactiseal Silicone antibiotic impregnated catheter Ventricular catheter length 14 cm
Silicone
Catheters, Epidural
Medical Specialties Australia Pty LtdMS005 E-Catheter Silicone epidural catheters 18ga
PART A - Prostheses List by Category, Groups and Sponsor Page 125 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Hydrocephalic
CWL Medical Enterprises Pty LtdCW007 Cardiac/Peritoneal Catheters SiliconDistal Catheter, ID 1.3mm, OD 90cm, barium impregnated silicone
catheter, closed or open ended, with or
CW008 Ventricular Catheters Silicon Ventricular Catheter 15cm - 25cm, optional flanges or right angle or endoscopic tip. ID 1.3mm, OD
Global Scientific Pty LtdGS134 Shunt Lumbar 80cmGS150 Atrial Catheter Components - catheter: Atrial Atrial Length: 46cm, F7. OD: 2.1mm; ID:1.1mm
Catheters Hydrocephalux Valve
GS151 Peritoneal Catheter Peritoneal Catheters Length: 91cm, F7. OD: 2.1mm; ID:1.1mm
Medtronic Sofamor Danek Australia Pty LtdSD166 Shunt: Components catheter Ventricular Catheter, CSF Catheter 1.3 - 35cmSD218 CSF - Ventricular Catheters PSM Range Non metallic latex free. Barium ID 1.3mm OD 2.5mm Length 15cm,
impregnated, include stainless steel stylet. 23cm; ID 1.2mm OD 2.1mm Length Model Nos 41101, 41115, 41207, 41103, 41308, Proximal ventricular
SD219 CSF - Distal Catheters Non metallic and latex free, Models Distal cardiac/peritoneal catheters ID 43418,43103,43111,43209,43522,43551, 1.3mm OD 2.5mm Length 90cm, 96cm, 27211 110cm, 120cm, ID 1.2mm, OD 2.1mm,
Length 90cm, 75cm, 58cm
SD278 Peritoneal Catheter PSM range with Translucent silicone elastomer with 60-90cmBarium impregnated stripe. Catheter surface bonded with Hydrogel.
SD279 Ventricular Catheter PSM range with Translucent silicone elastomer with 15-23cmBarium impregnated stripe. Catheter surface bonded with Hydrogel.
Catheters, Intracranial, Ventricular
B Braun Australia Pty LtdBB078 Shunt Accessories Catheter-Ventricular 60cm to 120cm
PART A - Prostheses List by Category, Groups and Sponsor Page 126 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Scientific Pty LtdGS001 Heyer-Schulte In Line Valve System Anti Siphon Device One size onlyGS015 Heyer-Schulte Pudenz Ventricular Catheter - small, standard, right-angledGS133 Shunt Components - catheter: Atrial 55cm - 60cm, Low - High pressure rangeGS135 Shunt Peritoneal 90 - 120cmGS136 Shunt Ventricular 14.5cm - 23cmGS139 Heyer Schulte Portnoy Flanged Composition - silicone with tantalum Length 18cm, outer diameter 8mm
Ventricular Catheter markings
Johnson & Johnson Medical Pty LtdJJ227 Codman Medos Straight Ventricular 14cm, packaged sterile, silicone rubber 14cm
Catheters, Other
Boston Scientific Pty LtdBS028 GDC Delivery Catheters Delivery systems with nitinol braid, 150-175cm/3-25cm Only to be funded when
Polypropylene promixal, Polyethylene used with a coildistal; Tracker 10 Unibody Infusion Catheter, Fasttracker Vascular Access System, Turbo Tracker Infusion Catheter; Fastracker Vascular Access System; Turbo Tracker Infusion Catheters; Tracker Excel Microcatheter; Renegade Fibre Braided Microcatheter; Excelsior 1018 Microcatheter.
Catheters, Peritoneal
Johnson & Johnson Medical Pty LtdJJ163 Hakim Ventricular and Peritoneal Catheter Silicone ventricular/peritoneal catheter Peritoneal Catheter length 80 cm,
Set with Bactiseal Silicone Ventricular Catheter length 15 cm
JJ229 Codman Medos Peritoneal Catheter 85cm, packaged sterile, silicone rubber 85cm
PART A - Prostheses List by Category, Groups and Sponsor Page 127 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Peritoneal, Long Term Indwelling
Bard Australia Pty LtdBA045 Hickman Catheters Du Pen Long Term Epidural Catheter One Size Only
Clamps, Skull
B Braun Australia Pty LtdBB072 Craniofix Titanium Clamps Titanium 11mmBB073 Craniofix Titanium Clamps Titanium 16mmBB168 Craniofix Titanium skull fixation clamp 20mm
Clips
Stryker Australia Pty LtdSK370 Universal Neuro NeuroClip 1.5mm
Clips, Aneurysm
B Braun Australia Pty LtdBB108 Aneurysm Clip Yasargil 4.5mm x 150g to 25.0mm x 200gBB109 Aneurysm Clip Yasargil Phynox Mini 2.8mm x 110g to 7.0mm x 130gBB110 Aneurysm Clip Yasargil Titanium 4.9mm x 150g to 20.0mm x 200gBB111 Aneurysm Clip Yasargil Titanium Mini 2.8mm x 110g to 7.0mm x 110gBB112 Aneurysm Clip Yasargil Reinforcing, Titanium/Phynox One size onlyBB175 Yasargil Aneurysm Clip System Phynox temporary clips are manufactured 3mm - 20mm length, phynox temporary
from phynox.
BB176 Yasargil Aneurysm Clip System Titanium termporary clips are 3mm- 25mm length, titanium temporary manufactured from titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 128 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB218 Kopitnik Microneurosurgical AVM Clips Composition: Phynox (Cobalt-base-alloy) 2mm, 3mm, 4mm, 5mm - straight. 2mm, 3mm, 4mm, 5mm - curved.
Johnson & Johnson Medical Pty LtdJJ130 Aneurysm Clips Stainless steel alloy AVM Micro Clip Blade length 2-9.5 mmJJ131 Aneurysm Clips Stainless steel Graft Clip (with teflon Blade 2-5mm diameter, 3-7mm length JJ134 Aneurysm Clips Stainless steel Reinforcing (booster) Clip Blade length 2-9.5 mmJJ136 Aneurysm Clips Stainless steel large clip, curved Blade 6mm diameter, 7.5mm lengthJJ137 Aneurysm Clips Stainless steel large clip, right-angled Blade 6mm diameter, 5mm lengthJJ138 Aneurysm Clips Stainless steel large clip, right-angled Blade 6mm diameter, 7.5-15mm lengthJJ139 Aneurysm Clips Stainless steel large clip, 30 degree angle Blade length 12mmJJ140 Aneurysm Clips Stainless steel large clip, bayonet Blade length 5-12mmJJ141 Aneurysm Clips Stainless steel large clip, fenestrated Blade 6mm diameter, 24mm lengthJJ142 Aneurysm Clips Stainless steel large clip, fenestrated tandem Blade 6mm diameter, 6 mm lengthJJ143 Aneurysm Clips Stainless steel standard clip, straight to 4.5-10mm length
right angled
JJ144 Aneurysm Clips Stainless steel standard clip, side angle 0.6mm diameter, 10mm lengthJJ146 Aneurysm Clips Stainless steel standard clip, slightly curved 0.6mm diameter, 15mm lengthJJ147 Aneurysm Clips Stainless steel standard clip, right angle 0.6mm diameter, 5.5 mm lengthJJ148 Aneurysm Clips Stainless steel standard clip, straight to 0.5-0.6mm diameter, 5-15mm length
right angle
JJ149 Aneurysm Clips Stainless steel standard clip, straight to 5-25mm lengthJJ150 Aneurysm Clips Stainless steel standard clip, slightly curved 16mm lengthJJ151 Aneurysm Clips Stainless steel standard clip, bayonet 9mm lengthJJ152 Aneurysm Clips Stainless steel standard clip, bayonet 15mm lengthJJ153 Aneurysm Clips Stainless steel standard clip, curved 10-14mm lengthJJ154 Aneurysm Clips Stainless steel standard clip, slightly curved 8-20mm lengthJJ155 Aneurysm Clips Stainless steel standard clip, bayonet to 6-25mm length
right angle
JJ217 Aneurysm Clips Stainless steel large clip Blade 4-6mm diameter, 5-25mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 129 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
National Surgical Corporation Pty LtdNI142 Medicon Aneurysm Clips Aneurysym clips titanium, standard titanium SmallNI143 Medicon Aneurysm Clips Aneurysym clips titanium, standard Large
titanium, stainless steel
NI144 Medicon Aneurysm Clips Aneurysym clips titanium, standard Smallstainless steel
NI145 Medicon Aneurysm Clips Aneurysym clips titanium, mini titanium One size onlyNI146 Medicon Aneurysm Clips Aneurysym clips titanium, mini stainless One size only
Taylor Bryant Pty LtdTB116 Aneurism Clip Sugita Clips, Standard Slightly Curved, One Size EachTB117 Aneurism Clip Sugita Clip, Temporary Straight/S, One Size Each
Sugita Clip, Temporary Straight/L
TB118 Aneurism Clip Sugita Clips: Standard Straight-Short One Size Each#1/Long #2
TB119 Aneurism Clip Sugita Titanium Anneurysm Clips: One Size EachStandard Straight/s, Straight-L, Bayonet, Angled, Straight-Small, STD Temp-STD Small, STD Temp-Straight/Large, STD Temp-Bayonet, STD Temp-CVD, Mini Straight-Small, Mini Straight/Large, Mini Curve, Mini Angled, Mini Curve
TB147 Aneurism Clip Sugita Titanium Clips: Standard Slight One Size EachAngle, Side CVD, CVD, Angled, Bayonet-Small/Large, Straight-Medium, Slight CVD, Straight Large, L Angle-Small/Medium/Large, 45D CVD Small/Medium/Large, STD Temp Slight CVD, Temp Mini Straight/Large, Temp Mini Angle, Standard 1/4 Curved-Small/Large, STD Slight Angle, Standard Slight Curve, Curve, 1/4 Curve, Mini Curve, Side Curve, Angle, Bayonet,
TB148 Aneurism Clip Sugita Titanium Clips: Standard Side CVD One Size Each Bayonet, Small CVD, Side Angled, Slight CVD, J Angle-Small/Medium/Large, Slight CVD Small, Temp Mini Straight Slim, Standard L Curved- Small/Large, Mini Straight Slim, Curve Slim,
PART A - Prostheses List by Category, Groups and Sponsor Page 130 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB149 Aneurism Clip Sugita Titanium Clips: Booster One Size EachTB150 Aneurism Clip Sugita Clips: Mini Straight Slim, CVD One Size EachTB151 Aneurism Clip Sugita Clips: Fenest, Lrg L Shaped W/CVD One Size EachTB152 Aneurism Clip Sugita Clips, Mini CVD Slim One Size EachTB153 Aneurism Clip Sugita Clips, Long One Size EachTB154 Aneurism Clip Sugita Clip, Large Straight/Short One Size EachTB155 Aneurism Clip Sugita Clip, Temporary Bayonet, Bent One Size EachTB156 Aneurism Clip Sugita Clip, STD Sideward CVD One Size EachTB157 Aneurism Clip Sugita Clip, Large Sideward Bent, Bent, One Size Each
Bayonnet-Short/Large, Straight-
TB158 Aneurism Clip Sugita Clip, Large L Shaped- One Size EachShort/Medium/Large, Large J Shaped-Short/Medium/Large, Fenest Large Straight-S/M/L, Large Bent-S/M/L, Fenest Large L Shaped-S/M/L
TB159 Aneurism Clip Sugita Clip, Temporary Mini Straight, 5-7mm length x 1.2mm width, closing Bent, Mini Straight/Short, Bent, force 125gmsSDEWARD CVD, CVD
TB160 Aneurism Clip Sugita Clip, Mini CVD 4mm length x 1.2mm width, closing force 120 & 124gms
TB161 Aneurism Clip Sugita Clip, Mini CVD 5mm length x 1.2mm width, closing force 132gms
TB162 Aneurism Clip Sugita Clip, Large Slightly Crv- One Size EachTB163 Aneurism Clip Sugita Clip, Large 45 D Angle/s, Slightlyn One Size Each
Crv/s, Temporary Slighly Crv, Mini Straight Slim, Large 1/4 CVD, Mini
TB164 Aneurism Clip Sugita Clip, Large Straight, Bayonet, Mini One Size Each Bayonet
TB165 Aneurism Clip Sugita Clip, Large L Shaped W/CRV-S/L, One Size Each 1/4 CVD-S/L
TB166 Aneurism Clip Sugita Clip, Large 45D Angle-M/L One Size EachTB167 Aneurism Clip Sugita Clip, Fenest Large L Shaped-L, One Size Each
Bayonet
TB168 Aneurism Clip Sugita Clip, Fenest Large L Shaped W/CVD One Size Each
PART A - Prostheses List by Category, Groups and Sponsor Page 131 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB169 Aneurism Clip Sugita Clips, Standard Bayonnet, Bent, One Size EachSideward Bent, Sideward Curve, Slight
TB170 Aneurism Clip Sugita Clips, Standard Sideward Curve, One Size EachCurved
TB171 Aneurism Clip Sugita Clips, Standard Slight CVD, CVD 11mm length x 1.2 width, closing force 125-160gms; 9mm length x 1.2 width, closing force 120-155gms
TB294 Mizuho - Titanium Fenestrated Aneuysm Straight (S/M/L), Bent (S/ M/L), L- Closing Force 95 to 160 gmsClips Shaped (S/M/L), Bayonet, L Shaped
curved to left (S/M/L), L-Shaped curved
Victorian Health Care Association Pty LtdVH001 Spetzler Titanium Aneurysm Clips Permanent Standard & Temporary Clips. 5mm-13mm
Commercially Pure Titanium.
VH002 Spetzler Titanium Aneurysm Clips Fenestrated Clips. Commercially Pure 5mm-13mmTitanium.
Covers, Burr Hole
Johnson & Johnson Medical Pty LtdJJ165 Burr Hole Button Stainless steel ventriculostomy reservoir One size onlyJJ166 Burr Hole Button Silicone or stainless steel ventriculostomy 14mm diameter
reservoir
JJ167 Burr Hole Button Silicone ventriculostomy reservoir, flat One size onlyJJ168 Burr Hole Button Silicone ventriculostomy reservoir, One size onlyJJ169 Burr Hole Button Silicone ventriculostomy reservoir, large One size onlyJJ170 Burr Hole Button Silicone or stainless steel ventriculostomy One size only
reservoir, low profile
JJ171 Burr Hole Button Silicone or stainless steel ventriculostomy 24mm diameter reservoir
JJ284 BIOPLATE Burr hole cover 1.9mm, titanium, flexible contoured burr 18mmhole cover, packaged non-sterile
JJ285 BIOPLATE Burr hole cover 1.5mm, titanium, flexible contoured burr 12mmhole cover, packaged non-sterile
PART A - Prostheses List by Category, Groups and Sponsor Page 132 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ286 BIOPLATE Burr hole cover 1.9mm, titanium, rigid contoured burr 18mmhole cover, packaged non-sterile
JJ287 BIOPLATE Burr hole cover 1.5mm, titanium, rigid contoured burr 12mmhole cover, packaged non-sterile
JJ288 BIOPLATE Burr hole cover 1.5mm, titanium, rigid contoured burr 18mmhole cover, packaged non-sterile
JJ289 BIOPLATE Burr hole cover Titanium, burr hole cover, 6 hole, 12mm flatpackaged non-sterile
JJ290 Burr hole button Sterile, 10 per package, silicone rubber Button length 35mm, cover diameter 29mm, stem thickness 4.1mm
JJ291 Burr hole cover Burr hole cover, sterile, 10 per package, Seat diameter 10mm, seat depth 6mmsilicone rubber
JJ292 BIOPLATE Burr hole cover 1.5mm, titanium, flexible contoured burr 18mmhole cover, packaged non-sterile
JJ299 BIOPLATE Burr Hole Cover 1.9mm, titanium, flexible contoured burr 12mmhole cover, packaged non-sterile
Dressing Kits
Taylor Bryant Pty LtdTB296 Duraseal Dural Sealant DuraSeal is a Synthetic, absorbable, 5ml of hydrogel sealant Temporary approval,
Polyethylene Glycon, hydrogel sealant pending review of used as an adjunct to sutured dural repair product groupto achieve watertight closure.
Electrodes, Neuromuscular Stimulator
Medtronic Australasia Pty LtdMC185 Sacral Nerve Stimulation Unilateral Interstim Temporary test stimulation lead. One size only When used in pain
Model 3065U. This model is temporary therapy - to be funded for patient trial. Platinum / Iridium, when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 133 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Embolization Prostheses, Intravascular
Device Technologies Australia Pty LtdDE192 Dendron Coil Micro coils, straight, eight shape, pretzel Micro coils, straight dia 0.26 and
shape, loop shape, helix shape, cyclone; 0.38mm, length 1-5mm; eight shape dia micro meshes; jet coils; electrolytically 2mm, length 10mm; pretzel shape dia 3-detachable coils, helix and cyclone 5mm, length 25-45mm; loop shape dia
5mm, length 50mm; helix shape dia 2-8mm, length 20-100mm; cyclone dia 3/6mm, length 22-85mm; micro meshes dia 0.15mm, length 1-2mm; jet coils dia 0.22, 0.36mm, length 0.3-5cm; EDC dia 2-20mm, length 1-30cm
DE193 Dendron Detachable Coils Electrolytically detachable coil, helix, Dia 2mm x length 1, 2, 3, 4, 6, 8, 10, 22,curved tip, multi diameter 42, 60, 85cm; diameter 2.5mm x length
15cm; diameter 3mm x length 3, 4, 6, 8, 10, 12cm; diameter 4mm x length 4, 6, 8, 10, 12, 15cm; diameter 5mm x length 5, 8, 10, 12, 15, 20, 25, 30cm; diameter 6mm x length 10, 15, 20cm; diameter 7mm x length 10, 20, 30cm; diameter 8mm x length 10, 20, 25cm; diameter 10mm x length 30cm; diameter 12mm x length 20cm; diameter 15mm x length 20, 30cm; diameter 20mm x length 15cm;
N Stenning & Co Pty LtdNG035 MicroPlex Coil System Kit includes delivery pusher, introducer Coil Size 10, 18 - Loop Diameter 2-
sheath, MCS complex coil 14mm, 16,18,20mm, Length 1-4cm, 6-13cm, 15-21cm, 23-24cm, 26-28cm, 30-34cm, 38-39cm, 43-44cm, 49-50cm
NG038 MicroPlex Coil System; Hydrocoil MCS Helical Coils Soft; MCS Helical Coil Regular
NG039 MicroPlex Coil System; Hydrocoil HES Helical Coils Hydrocoils 2mm Diameter x 3cm Length to 3mm Diameter x 7cm Length
NG040 MicroPlex Coil System; Hydrocoil HES Helical Coils Hydrocoils 4mm Diameter x 5cm Length to 5mm Diameter x 10cm Length
NG041 MicroPlex Coil System, Hydrocoil HES Helical Coils Hydrocoils 5mm Diameter x 15cm Length to 20mm Diameter x 20cm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 134 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
William A Cook Aust Pty LtdWC061 Detachable Coils Detach 18/11 Microembolisation Coils Diameters 0.30-0.46mm, Lengths 2cm-
Fittings/Adapters
Advanced Neuromodulation Systems Australia Pty LtdAV013 ANS Spinal Cord Stimulation System Boots, Connectors, Anchors, Strain Relief One size only When used in pain
therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
Fixation Device, Internal, Fracture
Biomet Australia Pty LtdBI870 Neurological Packs Plate, Neuro and screws, Ti 1.5mm or 2mm diameter
Fixation Device, Internal, Plate
Australian Surgical Innovations Pty LtdAI004 ASI Plates and Screws Plate Straight, Left, Right, X, T and Y shapedAI005 ASI Plates and Screws MeshAI006 ASI Plates and Screws Custom Mesh
Medical & Optical Instruments Australia Pty LtdMO244 Martin Micro Plate Osteosynthesis 1.5mm Titanium Sterile Drill Free Flap 2 - Hole Plate x 3, 1.5 x 4mm Screws x 6 Temporary approval,
Pack Kit pending review of product group
PART A - Prostheses List by Category, Groups and Sponsor Page 135 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Fixation Device, Internal, Screw
Australian Surgical Innovations Pty LtdAI007 ASI Plates and Screws Screw Width 1.0 - 3.0mm. Length 3.0 - 25mm
Guides, Other
Global Scientific Pty LtdGS194 Electa right angle guide Silicone One Size Only
Incision and Drainage Kits
Global Scientific Pty LtdGS207 Ventricular Catheter Silicone, with and without right angle 3-15cm, finned, straight and right angle
connectors
Infusion Pumps
Medtronic Australasia Pty LtdMC313 Synchro Med II Pump Model No's 8637-20 & 8637-40, 20 ml & 40 ml
Composition - Titanium
Infusion Pumps, Implantable
Medtronic Australasia Pty LtdMC059 Medtronic SynchroMed EL Drug Models 8627-10, 8627L-10, 8627-18, 10 to 18ml
Infusion Pump 8627L-18, Titanium
MC060 AlgoMed Infusion System Model 84112. Silicone, polyester mesh 50mlMC061 Medtronic IsoMed Drug Infusion Pump. Models 8472-20-03, 8472-20-05, 8472- 20ml, 35ml
20-10, 8472-20-15. Models 8472-35-05, 8472-35-10, 8472-035-15. Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 136 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC063 Medtronic IsoMed Drug Infusion Pump Models 8472-60-10, 8472-60-20, 8472- 60 ml60-05, 8472-60-25, 8472-60-30, l 8472-60-35, 8472-60-15, l 8472-60-40 titanium
MC071 AlgoMed Infusion system Model 27438 AlgoMed Control Pad OR One size onlyModel 27437 Algomed Drug reservoir and tubing. Silicone /polypropylene, polyester mesh.
MC073 AlgoMed Infusion System Model 27439 AlgoMed Catheter Kit. One size onlyRadiopaque silicone.
MC074 AlgoMed Infusion System Model 27442 AlgoMed Stepdown One size onlyconnector. Radiopaque polypropylene. OR Model 27443 14G Touhy needle. Sterile. Used for catheter insertion.
Infusion Pumps, Patient-Controlled Analgesic
Medtronic Australasia Pty LtdMC316 Personal Therapy Manager Model 8832 One Size Only When used in pain
therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
Injection/Infusion Ports, Implantable
Medical Specialties Australia Pty LtdMS006 Chemoport Titanium/ plastic 19, 20ga
Leads
Medtronic Australasia Pty LtdMC077 Medtronic quadripolar itrel II- 7424DBS DBS Unilateral: Extension kit for Deep 10-66 cm
Active implantable stimulators & ancillary Brain Stimulation Model 7495-51,PTFE, equipment sterile polyurethane,platinum,iridium, nickel alloy
PART A - Prostheses List by Category, Groups and Sponsor Page 137 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC078 Medtronic quadripolar itrel II- 7424DBS DBS Unilateral: Quadripolar Itrel II Model One size only x 1Active implantable stimulators & ancillary 7424 DBS, titanium equipment sterile
MC305 Low Profile Impedance Extension Kit for Silicone Rubber 25, 40, 51, 66, 95cmDBS Model 7482
Taylor Bryant Pty LtdTB017 Bipolar Lead Model 300-20 -
Leads, Dorsal Column, Implantable
Medtronic Australasia Pty LtdMC102 Mattrix Dual Channel System - Single Medtronic Pisces Octad Lead Kit Model 33cm When used in pain
Octad lead 3898. Materials -Silicone Rubber, therapy - to be funded Platinum/Iridium when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
MC104 Mattrix Dual Channel System - Pisces Medtronic Pisces Quad Lead Model 28 - 56cm When used in pain Quad leads 3487A,3487A-56. Pisces Quad Plus therapy - to be funded
Model 3888. Materials -Silicone Rubber, when the patient has Platinum/Iridium. Pisces Quad Compact undergone a multi-Lead Model 3887 - quadripolar disciplinary assessment percutaneous lead with four closely and trial of stimulation.spaced electrodes at the distal end design
MC135 Medtronic Australasia, Specify Lead DCI - Leads: Specify Lead Model 3998. 18cm x 1 When used in pain Model 3998, Active Implantable (dual lead) Materials - Silicone Rubber, therapy - to be funded Stimulators & Ancillary Equipment Platinum/Iridium when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
Mesh
Johnson & Johnson Medical Pty LtdJJ265 ETHISORB Dura Patch Synthetic Dura substitute, Vicryl fleece, 4 x 6cm
PDS foil, replaces natural dura post craniotomy, 3 units
PART A - Prostheses List by Category, Groups and Sponsor Page 138 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ266 ETHISORB Dura Patch Synthetic Dura substitute, Vicryl fleece, 6 x 14cmPDS foil, replaces natural dura post craniotomy, 1 unit
JJ267 ETHISORB Dura Patch Synthetic Dura substitute, Vicryl fleece, 2 x 3cmPDS foil, replaces natural dura post craniotomy, 1 unit
JJ268 ETHISORB Dura Patch Synthetic Dura substitute, Vicryl fleece, 2 x 3cmPDS foil, replaces natural dura post craniotomy, 6 units
JJ269 ETHISORB Dura Patch Synthetic Dura substitute, Vicryl fleece, 4 x 6cmPDS foil, replaces natural dura post craniotomy, 1 unit
Mesh, Metallic
Johnson & Johnson Medical Pty LtdJJ255 BIOPLATE Biomesh Titanium, lattice, 48 hole, packaged non- 32 x 44mm
sterile
JJ256 BIOPLATE Biomesh Titanium cranial biomesh, packaged non- 0.4mm thickness, 60 x 60mmsterile
JJ257 BIOPLATE Biomesh Titanium cranial biomesh, packaged non- 0.4mm thickness, 85 x 90mmsterile
JJ258 BIOPLATE Biomesh Titanium cranial biomesh, packaged non- 65 x 65mm, 90 x 92mmsterile
JJ259 BIOPLATE Biomesh Titanium cranial biomesh, packaged non- 0.4mm and 0.6mm thicknesssterile
JJ260 BIOPLATE Biomesh Titanium cranial biomesh 3ME, packaged 20 x 20cmnon-sterile
JJ441 Titanium Mesh 15cm x 15cm
Mesh, Polyglycolic Acid
Biomet Australia Pty LtdBI883 RapidFLAP LS Cranial Flap Fixation. Includes pre- One size only
attached applier. PGA/PLA
PART A - Prostheses List by Category, Groups and Sponsor Page 139 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic Internal Fixation Systems, Other
Biomet Australia Pty LtdBI716 W Lorenz Osteosynthesis System Pre-Contoured Neuro Mesh; Titanium (80,85) x 53mm x (0.3,0.6)mmBI717 W Lorenz Osteosynthesis System Neuro Gap Plate, Titanium 1.5mm system, largeBI718 W Lorenz Osteosynthesis System Neuro Gap Plate, Titanium 1.5mm system, smallBI719 W Lorenz Osteosynthesis System Neuro Sub-Temporal Plate, Titanium 1.5mm system, largeBI720 W.Lorenz Osteosynthesis System Neuro Gap Plate; titanium 1.5 mm system, MediumBI721 W Lorenz Osteosynthesis System Plate, Burr Hole, 1.5mm System, 22mm, 25mmBI722 W.Lorenz Osteosythesis System Pre-contoured Neuro Mesh, titanium 152 x 108 x (0.3, 0.6)mmBI728 W.Lorenz Osteosynthesis System Neuro Square Plate, titanium 1.5mm system, 4 holeBI729 W.Lorenz Osteosynthesis System Neuro Rectangle Plate, titanium 1.5mm system, 4 holeBI773 W Lorenz Osteosynthesis System Neuro sub-temporal plate, 1.5 system, Small
titanium
BI785 W Lorenz Osteosynthesis Mesh 1.5mm system, pre-contoured, 40 x 40 x 0.6mm profile
Orthopedic Internal Fixation Systems, Spinal
ZimmerZI476 Silhouette Spinal System Implants Fixed Screw with Tab Extensions 5.5 x 25mm to 8.5 x 60mm
Plates, Bone
Australian Surgical Design & Manufacture Pty LtdAE053 ASDM Bone Plates Custom Skull Mesh Plate, Titanium One size onlyAE054 ASDM Bone Plates Titanium 1.0mm MF Bone Plate Small, Single square plate 2x2 holes, T-
shape, 90 deg, 5 holes
PART A - Prostheses List by Category, Groups and Sponsor Page 140 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AE055 ASDM Bone Plates Titanium 1.0mm MF Bone Plate Medium, Double square plate, 3x2 holes; Double Y-shape, 6 or 7 holes; Y-shape, 6 hole; Double T-shape, 9 hole;T-shape, 90 deg, 7 holes;L-shape, right or left, 5 hole;Straight Plate, 8 hole
AE056 ASDM Bone Plates Titanium 1.0mm MF Bone Plate Large, Triple square plate, 4x2 holes;Curved plate, 8 hole;Straight plate, 24 hole;L-shape plate, right or left, 8 holes
AE057 ASDM Bone Plates Titanium 1.7mm MF Bone Plate, Small, Straight plate, 6-8mm, 4 hole;L-Shape, right or left, 6mm, 4 hole;Curved plate, 6mm, 4 hole
AE058 ASDM Bone Plates Tiranium 1.7mm MF Bone Plate, Medium, L-Shape, right or left, 8mm, 4 hole;Y-Shape, 8mm, 5 hole;T-Shape, 10mm, 5 hole;L-shape, right or left, 10-12mm, 4-5 holes;Straight Plate, 8 hole;Double Y-Shape, 6-7 holes;Curved plate, 6-8 holes;Single square plate, 2x2
AE059 ASDM Bone Plates Titanium 1.7mm MF Bone Plate, Large, Triple square plate, 4x2 holes;Straight plate, 16 hole
AE060 ASDM Bone Plates Titanium 2.0mm MF Bone Plate, Small, Straight plate, 9-13mm, 4 holes;Staright plate, 4 holes;L-shape, right or left, 4 holes
AE061 ASDM Bone Plates Titanium 2.0mm MF Bone Plate, Medium, Y-Shape, 8 hole;Double Y-Shape, 6 hole;L-Shape, right or left, 5 holes;L-Shape, right or left, 9-13mm, 4 holes;Straight Plate, 6 hole;Curved plate,
AE062 ASDM Bone Plates Titanium 2.0mm MF Bone Plate, Large, Double square plate, 3x2 holes;Curved plate, 10 hole;Straight plate, 16 hole;L-shape plate, right or left, 9 holes
AE063 ASDM Bone Plates Titanium 2.2mm MF Bone Plate, Small, Straight plate, 8-14mm, 4 holes;Curved plate, 11mm, 4 holes
AE064 ASDM Bone Plates Titanium 2.2mm MF Bone Plate, Medium, Straight plate, 8-14mm, 6 holesAE065 ASDM Bone Plates Titanium 2.2mm MF Bone Plate, Large, Straight plate, 11mm, 8
holes;Straight plate, 14 holes;Angled
Johnson & Johnson Medical Pty LtdJJ270 BIOPLATE Bone plate Titanium straight plate, 2 hole, 5 per 12mm in length
pack, packaged non-sterile
JJ271 BIOPLATE Bone plate Titanium Y plate, 5 hole, packaged non- 19mm
PART A - Prostheses List by Category, Groups and Sponsor Page 141 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ272 BIOPLATE Bone plate Titanium T-plate, 5 hole, packaged non- 16mmJJ273 BIOPLATE Bone plate Titanium boxcar plate, 6 hole, packaged 9 x 18mm
non-sterile
JJ274 BIOPLATE Bone plate Titanium boxcar plate, 8 hole, packaged 11 x 25mmnon-sterile
JJ275 BIOPLATE Bone plate Titanium cranial straight plate, 2 hole, 1.9mmpackaged non-sterile
JJ276 BIOPLATE Bone plate Titanium curved plate, 8 hole, packaged 30mmnon-sterile
JJ277 BIOPLATE Bone plate Titanium straight plate, 2 hole, packaged 11mm in lengthnon-sterile
JJ278 BIOPLATE Bone plate Titanium cranial straight plate, 16 hole, 1.5mm and 1.9mmpackaged non-sterile
JJ279 BIOPLATE Bone plate Titanium cranial compression plate, 2 1.5mm and 1.9mmhole, 3 per pack, packaged non-sterile
JJ280 BIOPLATE Bone plate Titanium large boxcar plate, 4 hole, 14 x 14mmpackaged non-sterile
JJ281 BIOPLATE Bone plate Titanium BIO100, 2 hole plate, 5 per 1.5mmpack, packaged non-sterile
JJ282 BIOPLATE Bone plate Titanium straight plate, 2 hole, 3 per 14mm in lengthpack, packaged non-sterile
JJ283 BIOPLATE Bone plate Titanium straight plate, 2 hole, packaged 14mm in lengthnon-sterile
Plates, Cranioplasty
Biomet Australia Pty LtdBI714 RapidFlap Cranial Clamp Clamp, Burr Hole or Craniotomy Line, 12, 16, 20mm
Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 142 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Plugs
Medtronic Australasia Pty LtdMC086 Accessory Kits - Stimulator; EZ Anchor; 3550-09 - Synergy accessory kit OR One size only When used in pain
Tunnelling Rod; Percutaneous Lead 3550-01 - Boots & anchors OR 3550-02 therapy - to be funded Introducer; SCS & PNS Model 3550-24; - Wrenches & screws OR 3550-03, when the patient has DBS Model 3550-25; 3550-0SCO - Screening cable OR 3550- undergone a multi-
04 - Epidural needle OR 3550-05 - disciplinary assessment Percutaneous extension OR 3550-06 - and trial of stimulation.Tunnelling tools; 3550-16 - Silicone rubber anchors; 3555 - Tunneling Rod; 3550-12 - Coil guide wire & Introducer sheaths; Silcone rubber;
Prostheses, Meningeal
B Braun Australia Pty LtdBB015 Neuro-Patch Polyesterurethane 12 x 14cmBB113 Neuropatch Dura Substitute Polyurethane 6 x 14cmBB114 Neuropatch Dura Substitute Polyurethane 6 x 8cmBB115 Neuropatch Dura Substitute Polyurethane 4 x 10cmBB116 Neuropatch Dura Substitute Polyurethane 4 x 5cmBB117 Neuropatch Dura Substitute Polyurethane 2 x 10cmBB118 Neuropatch Dura Substitute Polyurethane 1.5 x 3cm
Reservoirs, Cerebrospinal Fluid
B Braun Australia Pty LtdBB081 Shunt Accessories Reservoir Small, large
CWL Medical Enterprises Pty LtdCW011 Reservoirs Shunt component 9mm to 25mm, with or without
convertible outlet port, burr hole or flat
PART A - Prostheses List by Category, Groups and Sponsor Page 143 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Scientific Pty LtdGS008 Heyer-Schulte Braden Flushing Reservoir - One size onlyGS011 LPV Shunt System Standard, mini, Pressure range low - highGS012 Heyer-Schulte Ommaya CSF Reservoir Standard, side-inlet, convertible, mini 1.5 - 2.5cm and miniGS016 Heyer-Schulte Foltz Flushing Reservoir - One size only
Medtronic Sofamor Danek Australia Pty LtdSD167 Pressure valve (anti-siphon device or Neonatal Reservior, CSF Lumbo 2 - 90cm
flushing valve or flush pump)
SD168 Pressure valve (anti-siphon device or Reservoir, CSF Vent Reservoir, Snap 6 - 90mmflushing valve or flush pump) Assembly Reservoir
Resinous Compounds, Cranial
Johnson & Johnson Medical Pty LtdJJ303 Cranioplastic Kit (Type 1) Cranioplastic kit containing 2 complete 30grams
sets. Consists of 2 bags of sterile powder, 2 vials sterile liquid, 2 sterile
Screws, Bone
Johnson & Johnson Medical Pty LtdJJ244 BIOPLATE Bone screw Titanium alloy self-drilling screws, 5 per Dia 1.9mm, length 5mm
pack, packaged non-sterile
JJ245 BIOPLATE Bone screw Titanium alloy self-drilling screws, 5 per Dia 1.9mm, length 4mmpack, packaged non-sterile
JJ246 BIOPLATE Bone screw Titanium alloy self-drilling screw, 1 per Dia 1.9mm, length 3 - 5mmpack, packaged non-sterile
JJ247 BIOPLATE Bone screw Titanium alloy self-drilling screw, Dia 1.9mm, length 3mmpackaged non-sterile
JJ248 BIOPLATE Bone screw Titanium alloy self-drilling screw, 5 per Dia 1.5mm, length 3 - 5mmpack, packaged non-sterile
JJ249 BIOPLATE Bone screw Titanium alloy self-drilling screw, 1 per Dia 1.5mm, length 3 - 5mmpack, packaged non-sterile
PART A - Prostheses List by Category, Groups and Sponsor Page 144 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ250 BIOPLATE Bone screw Titanium alloy long screw, 1 per pack, Dia 1.9mm, length 3, 4, 5, 6, 8, 10mmpackaged non-sterile
JJ251 BIOPLATE Bone screw Titanium alloy long screws, 5 per pack, Dia 1.9mm, length 3, 4, 5, 6, 8, 10mmpackaged non-sterile
JJ252 BIOPLATE Bone screw Titanium alloy long screw, 1 per pack, Dia 1.5mm, length 3, 4, 5, 6, 8, 10mmpackaged non-sterile
JJ253 BIOPLATE Bone screw Titanium alloy emergency screws, 5 per Dia 1.8, length 6mm; Dia 2.3mm, length pack, packaged non-sterile
JJ254 BIOPLATE Bone screw Titanium alloy emergency screw, 1 per Dia 1.8, length 6mm; Dia 2.3mm, length pack, packaged non-sterile
Shunt Adapters
B Braun Australia Pty LtdBB079 Shunt Accessories Deflector - Burrhole Small, largeBB080 Shunt Accessories Connector Straight, Y, T, X form
Johnson & Johnson Medical Pty LtdJJ228 Codman Medos Connector Codman Medos stainless steel shunt One size only
connector straight
Shunts, Hydrocephalic
CWL Medical Enterprises Pty LtdCW002 Neonatal Shunt System Shunt Assembly, includes separate Medium, low or low-low pressure
ventricular catheter, integral distal catheter
CW004 Equi Flow Valves Valve only Small (35mm length) or Regular (40mm length); low, low/medium and medium pressure
CW005 Equi Flow Shunt Assemblies CSF Shunt, includes silicone ventricular Small (35mm length) or Regular (40mm and peritoneal catheters, silicone encased length); low, low/medium and medium overdrainage control valve pressure; various kit configurations
CW006 Lumboperitoneal Shunt Assemblies CSF LP Shunt includes: silicone catheter, Straight or "T" tubestainless steel trocar, suture tabs
PART A - Prostheses List by Category, Groups and Sponsor Page 145 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
CW009 Burr Hole Valve Shunt Assemblies Shunt Assembly: silicone encased valve, 16mm or 12mm base; low, medium or silicone ventricular and peritoneal catheters high pressure, various kit configurations
Global Scientific Pty LtdGS002 Spetzler Lumbar-Peritoneal Shunt System Shunt, CSF Reservoir, In-line valve Catheter length 80 - 105cm, Reservoir
small & large, Valve pressure range low -
GS006 Novus Hydrocephalic Shunt Kit Pressure range low, medium Standard, miniGS007 Heyer-Schulte Spetzler Lumbar-Peritoneal - Small, large
Low Pressure Flushing Reservoir
GS014 Edwards Barbaro Syringo Peritoneal Shunt 80 x 3.5cm 5FRT-Tube, 90cm peritoneal One size onlyreflux control catheterStep down connector, Foltz CSF
GS142 Novus Hydrocephalic Shunt - Heyer Novus valve made from Standard size - low & medium pressure; silicone/polysulfone, each valve is packed Mini size - low & medium pressure with a valve and a right angled catheter
GS144 Spetzler In Line Valve - Heyer Schulte Composition silicone, valve with integral Low, Medium, High Pressureconnectors
GS145 Cordis Omnishunt System, Hakim Valve Hakim Valve System Drainage Cath 110 cm, F7. Vent. Cath Series 15cm, F8.
GS195 Cordis Omnishunt System Silicone and Synthetic ruby Very low to very high pressures
Johnson & Johnson Medical Pty LtdJJ161 Codman-Medos Non-programmable Silicone fixed pressure lumber/peritoneal Peritoneal Catheter length 25-80cm
Valve System catheter, James design
JJ162 Codman-Medos Non-programmable Silicone fixed pressure lumber/peritoneal Peritoneal Catheter length 65 cmValve System catheter, Holter design
JJ164 Siphonguard CSF Control Device PET shell anti-siphon device for shunt One size onlyJJ218 HOLTER Intracranial Pressure Shunt HOLTER Ventricular Catheter, packaged 3 - 7cm and 15cm
sterile, silicone rubber
JJ225 HOLTER Intracranial Pressure Shunt HOLTER distal peritoneal catheter, 90cm in lengthpackaged sterile, silicone
JJ226 HOLTER Intracranial Pressure Shunt HOLTER distal peritoneal catheter 90cm in lengthSalmon, packaged sterile, silicone
JJ261 ACCU-FLO Intracranial Pressure shunt ACCU-FLO catheter, packaged sterile, 91cm in lengthsilicone rubber
JJ262 ACCU-FLO Intracranial Pressure shunt ACCU-FLO three way connector, One size onlypackaged sterile, metal or plastic
PART A - Prostheses List by Category, Groups and Sponsor Page 146 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ263 ACCU-FLO Intracranial Pressure shunt ACCU-FLO barium ventricular catheter, One size onlypackaged sterile, silicone rubber
JJ264 ACCU-FLO Intracranial Pressure shunt ACCU-FLO right angle connector, One size onlypackaged sterile, metal or plastic
Medtronic Sofamor Danek Australia Pty LtdSD162 Hydrocephalus Shunt Ventricular/Peritoneal. CSF Flow Control 12mm-90cm
Valves, BioGlide Contoured, Ventriculostomy Kit-E, Neonatal Delta Snap Shunt
SD280 Strata Shunt, Unitised Adjustable CSF valve with five symmetric 8-13.5cm x 9-120cm performance level steps. Includes strata valve, pre-attached ventricular catheter, and a pre-attached peritoneal catheter. Right Angle Clip. Disposable Quick Release Ventricular Catheter Introducer. Disposable Subcutaneous Catheter Passer. Tuohy-Borst Adapter.
SD289 Delta Shunt Unitised Delta valve is a fixed pressure CSF valve, Delta Unitised Shunt small (Distal 65cm- available in four performance levels. 90cm, ventricular 11cm) - 0.5, 1.0, 1.5 Delta Unitised shunt includes a delta and 2.0. Delta Unitised Shunt regular valve, pre-attached ventricular catheter, (Distal 90cm, ventricular catheter 13cm) and a pre-attached peritoneal catheter. - 0.5, 1.0, 1.5 and 2.0Right Angle Clip. Disposable Quick Release Ventricular Catheter Introducer.
SD290 Delta Shunt Assembly Delta valve is a fixed CSF pressure valve, 90-120cm (0.5 - 2.0) available in four performance levels. Includes an Integral (distal) Peritoneal Catheter, Disposable Peritoneal Catheter Passer, Female Luer Adapter and Prefill
SD292 Strata Shunt Assembly Adjustable CSF valve with five symmetric 90-120cm performance level steps. The assembly includes an Integrated (distal) Peritoneal Catheter. Disposable Peritoneal Catheter Passer. Female Luer Adapter and Prefill tubing.
PART A - Prostheses List by Category, Groups and Sponsor Page 147 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stents, Vascular
Boston Scientific Pty LtdBS079 Neuroform 2 Microdelivery Stent System Self-expanding nitinol stent, 3fr delivery Diameter: 2.5-4.5mm, Length: 10mm-
catheter, peelable sheath, 2fr stabilising catheter, rotating haemostasis valve (x2)
Stimulator, Electrical, Analgesic, Spinal
Medtronic Australasia Pty LtdMC312 Octapolar Extension Model 7471 Silicone rubber Lengths: 20, 40, 51, 66 cmMC315 Low Profile Impedance Extension Kit for Silicone rubber 10, 25, 40, 51, 66cm
SCS Model 7489
Stimulators
Advanced Neuromodulation Systems Australia Pty LtdAV008 ANS Spinal Cord Stimulation System Transmitter Kit 16 Channel One size only When used in pain
(SCS) RENEW therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV009 ANS Spinal Cord Stimulation System Transmitter Kit 8 Channel One size only When used in pain (SCS) RENEW therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV010 ANS Spinal Cord Stimulation System Transmitter. 4 Channel - antenna locator One size only When used in pain (SCS) 4 Channel Receiver Kit Model-904. therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 148 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AV017 ANS Spinal Cord Stimulation System Implantable Pulse Generator - Genesis G4 One Size Only(SCS) GENESIS Model 3604
AV018 ANS Spinal Cord Stimulation System Implantable Pulse Generator - Genesis XP One Size Only(SCS) GENESIS Model 3609
AV019 ANS Spinal Cord Stimulation System Implantable Pulse Generator - Genesis XP One Size Only(SCS) GENESIS Dual Model 3644
Medtronic Australasia Pty LtdMC247 Patient Activators Hand held device Models 7434 & 7435 to One size only When used in pain
be used with Itrel III and Synergy therapy - to be funded Implantable Pulse Generators when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
MC249 Access Therapy Controller Handheld device used with the Kinetra One size only To be funded for the and Soletra Implantable Pulse Generators initial implant only.
Stimulators, Electrical, Brain
Medtronic Australasia Pty LtdMC244 Medtronic Australasia DBS Lead Model Deep brain stimulation lead with four 28 - 40cm
3389, Medtronic quadripolar Itrel II- platinum iridium electrodes Models 3387 7424DBS, Active Implantable Stimulator and 3389. Electrode spacing is 1.5mm & Ancillary Equipment apart for Model 3387 and 0.5mm apart
for Model 3389. PTFE, polyurethane, platinum/iridium, nickel alloy, tungsten
Stimulators, Electroanalgesic, Dorsal Column
Medtronic Australasia Pty LtdMC110 Itrel 3 System - Lead extension Medtronic Lead Extension Kit Models 10 - 66cm When used in pain
7495,7496,7498 - Materials Silicone therapy - to be funded rubber, Platinum/Iridium when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 149 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stimulators, Electroanalgesic, Intracerebral/Subcortical
Medtronic Australasia Pty LtdMC001 Kinetra Dual Channel Implantable Pulse Titanium, polyurethane One size only
Generator Model 7428
MC107 Mattrix Dual Channel System - Antenna Model 3440 DCS Antenna kit. Medical One size only When used in pain antenna. External component of therapy - to be funded implantable Mattrix system. Polyurethane. when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
MC141 Epidural Stimulator - Leads Verify Screening lead Model 3862, 3862- 45 - 60cm When used in pain 45. Silicone, Platinum/Iridium therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
Stimulators, Electroanalgesic, Spinal Cord
Advanced Neuromodulation Systems Australia Pty LtdAV004 ANS Spinal Cord Stimulation System Dual Receiver 16 Channel (2 x 8 channel) One size only When used in pain
(SCS) RENEW therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV005 ANS Spinal Cord Stimulation System Single Receiver 8 Channel (1 x 8 channel) One size only When used in pain (SCS) RENEW therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 150 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AV006 ANS Spinal Cord Stimulation System Single Receiver. 8 Channel (1 x 8) One size only When used in pain (SCS) RENEW therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
AV014 ANS Spinal Cord Stimulation System Implantable Pulse Generator - Genesis One size only(SCS) GENESIS Model 3608
AV015 ANS Spinal Cord Stimulation System Patient Programmer Model 3850 One size only When used in pain (SCS) GENESIS therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation
AV016 ANS Spinal Cord Stimulation System Communication Magnet Model 1210 One type only When used in pain (SCS) GENESIS therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation
AV020 ANS Spinal Cord Stimulation System QuikLink Patient Programmer Model One Size Only(SCS) GENESIS
Medtronic Australasia Pty LtdMC105 Mattrix Dual Channel System - Medtronic Mattrix Receiver Kit Model One size only When used in pain
Receiver/Extension 3271, 3272. Materials - Polyurethane, therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
MC106 Mattrix Dual Channel System - Medtronic Mattrix Transmitter/Antenna One size only When used in pain Kit 3210. Polycarbonbate therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
MC115 Peripheral Nerve Stimulation - Unilateral - Medtronic Model 7425 Itrel 3 Implantable One size only When used in pain Pulse Generator Pulse Generator. Titanium therapy - to be funded
when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
PART A - Prostheses List by Category, Groups and Sponsor Page 151 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC137 Medtronic A/Asia, Synergy Dual Channel DCI - Pulse Generator: Synergy Dual One size only When used in pain Implantable Pulse Generator Model 7427, Channel Implantable Pulse Generator therapy - to be funded Active Implantable Stimulators. Model 7427. Materials - Titanium when the patient has
undergone a multi-disciplinary assessment and trial of stimulation.
Stimulators, Neuromuscular, Functional
Medtronic Australasia Pty LtdMC079 Control Magnets Model 7452 Magnet One size only When used in pain
therapy - to be funded when the patient has undergone a multi-disciplinary assessment and trial of stimulation.
Stimulators, Neuromuscular, Therapeutic
Medtronic Australasia Pty LtdMC228 Soletra Model 7426 Neurostimulator Sterility - Ethylene Oxide. One size only
Neurostimualtor comprised of electronic circuitry and a battery, which are hermatically sealed in a titanium case
Stimulators, Vagus Nerve, Antiseizure
Taylor Bryant Pty LtdTB130 Pulse Generator - Model 101 Neurocybernetic Prosthesis (NCP) One size onlyTB300 VNS Therapy Pulse/Pulse Due Model 102/102R Generator one size onlyTB301 VNS Therapy Lead Model 302 one size only
PART A - Prostheses List by Category, Groups and Sponsor Page 152 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tissue Reconstructive Materials, Solid
W L Gore & AssociatesGT056 Preclude Dura Substitute ePTFE 0.3mm Thickness 2 x 10cmGT057 Preclude Dura Substitute ePTFE 0.3mm Thickness 5 x 6 cmGT058 Preclude Dura Substitute ePTFE 0.3mm thickness 6 x 10cmGT059 Preclude Dura Substitute ePTFE 0.3mm thickness 10 x 12cm
Tubes, Connecting
Global Scientific Pty LtdGS010 Heyer-Schulte Connectors for Pudenz straight, Pudenz right angled, Each in one size
Neurosurgical Use Pudenz three-way (Y) Threaded straight, Threaded right angled, Double threaded straight
GS193 Connectors Silicone and Stainless Steel Straight, right angle, Y, T
Valves, Hydrocephalic
B Braun Australia Pty LtdBB074 Pressure Valve Anti Siphon Device Shunt Assist Kit 15/11 to 35/25.7 pressure unitsBB075 Hydrocephalus Shunt Monostep Valve 5/3.6 to 16/11.0 pressure unitsBB076 Hydrocephalus Shunt Paedi-Gav. Valve 4/14 to 9/29 pressure unitsBB077 Hydrocephalus Shunt Dual Switch Valve 10/7.4 to 50/36.8 pressure units
CWL Medical Enterprises Pty LtdCW001 Contour-Flex Valves Silicone encased CSF Valve Small (24mm length) or Regular (28mm
length), low medium or high pressure
CW003 Contour Flex Valve Shunt Assemblies Shunt Assembly: silicone encased valve, Small (24mm length) or Regular (28mm silicone ventricular and peritoneal catheters length); low, low/medium and medium
pressure; various catheter and valve configurations.
PART A - Prostheses List by Category, Groups and Sponsor Page 153 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
CW010 Siphon Limiting Device Silicone Shunt Accessory for control of 15mm length, 4.5mm height, 10mm CSF overdrainage
Global Scientific Pty LtdGS003 Heyer-Schulte Pudenz Flushing Valve With Anti Siphon Device, Pressure range 12, 16mm
low - high
GS004 Heyer-Schulte Pudenz Flushing Valve Pressure range low - high 12, 16mmwith Integral Conn
GS005 Heyer-Schulte Mishler Dual Chamber Burr-hole and flat bottom designs Standard, miniFlushing Valve System Pressure range low - high
GS017 Heyer-Schulte In Line Valve System Ultra VS Cylindrical Shunt/Valve system - Neonate style, Pressure range low - high
GS018 Heyer-Schulte In Line Valve System Ultra VS Shunt Valve, Pressure low - small, standardGS137 Shunt Pressure valve (anti-siphon device or Low - High pressure range
flushing valve or flush pump)
GS138 Shunt Reservoir Standard, LargeGS140 Heyer Schulte Ultra VS Valve Kit Comprises of silicone, kit includes valve, Peritoneal catheter 90cm, ventricular
Neonatal Style peritoneal cather, ventricular catheter and catheter 18cmrickham style reservoir
GS141 Ultra VS Shunt Kit Standard - Heyer Composition silicone, kits contain 3.8-5.8mm diameter valve, 18cm standard valve, ventricular catheter, ventricular catheter, low, medium high peritoneal catheter, rickham reservoir pressure, 120cm peritoneal catheter
GS143 LPV Shunt System Kit - Heyer Schulte Composition silicone, kit includes LPV Standard - low, medium, high pressure; valve, peritoneal catheter, ventricular Mini - low, medium, high pressurecatheter, right angle catheter guide
GS146 Cordis Standard Valve System Atlas Valve System Drainage Cath 110 cm, F7. Vent. Cath Hydrocephalus Valves 15cm, F8.
GS147 Precision Flow-OSV II Valve System Lumbar peritoneal OSV11- Lumber Catheter 80cm, F5 Peritoneal Lumboperitoneal System Hydrocephalus Catheter 110cm, F7
GS148 Precision Flow-OSV II Valve System Ventricular/Atrial OSV11-Ventricular Drainage Cath 110 cm, F7. Ventricular /Atrial Hydrocephalus Shunt Catheters 7,9,13 & 15 cm
GS149 Precision Flow-OSV II Valve System Ventricular/Peritoneal OSV11- Drainage Cath 110 cm, F7. Ventricular Ventricular/Peritoneal Hyrocephalus Catheters 7,9,13 & 15 cm
GS196 Gravity Compensating Accessory Silicone/Stainless steel low, medium & high pressures
PART A - Prostheses List by Category, Groups and Sponsor Page 154 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Johnson & Johnson Medical Pty LtdJJ156 Hakim Precision Valve System Precision valve standard. Silicone casing Peritoneal Catheter length 80 cm,
& catheter; stainless steel ruby ball in Ventricular catheter length 14 cmcone mechanism with fixed pressure
JJ157 Hakim Precision Valve System Precision valve and pre-chamber. Silicone Peritoneal Catheter length 80 cm, casing & catheter; stainless steel ruby Ventricular catheter length 14 cmball in cone mechanism with fixed
JJ158 Hakim Programmable Valve System Standard system. Silicone casing without One size onlycatheter; stainless steel ruby ball in cone mechanism with variable pressure
JJ159 Hakim Programmable Valve System Standard system. Silicone casing with Peritoneal Catheter length 80 cm, catheter; stainless steel ruby ball in cone Ventricular catheter length 14 cmmechanism with variable pressure
JJ219 Hakim Programmable Valve System Fixed pressure hydrocephalus shunt, One size onlypackaged sterile, stainless steel and ruby valve mechanism, silicone rubber ventricular and peritoneal catheters. In line or right angled with reservoir. Valve can be reprogrammed non-invasively 18 pressure settings available in 10mm H20 increments. SiphonGuard anti-siphon device integrated into valve mechanism.
JJ220 Hakim Precision Valve System Fixed pressure hydrocephalus shunt, One size onlypackaged sterile, stainless steel and ruby valve mechanism, silicone rubber ventricular and peritoneal catheters. In line or right angled with reservoir. Opening pressure H20; Very high 130mm, high 100mm, medium 70mm, low 40mm, very low 10mm. With
JJ221 Hakim Precision Valve System Fixed pressure hydrocephalus shunt, One size onlypackaged sterile, stainless steel and ruby valve mechanism, silicone rubber ventricular and peritoneal catheters. In line or right angled with reservoir. Opening pressure H20; Very high 130mm, high 100mm, medium 70mm,
JJ436 Codman Hakim Programmable Valves 18 different pressure settings, various One Size OnlyJJ437 Codman Hakim Programmable Valves 18 different pressure settings and One Size Only
with Siphonguard SIPHONGUARD technology
PART A - Prostheses List by Category, Groups and Sponsor Page 155 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ438 Codman Hakim Precision Valves with features 5 operating pressures and Pressure settings 10, 40, 70, 100 and Siphonguard, Right Angle Reservoir SIPHONGUARD technlogy 130mmH2O
JJ439 Codman Hakim Precision Valve with features 5 operating pressures and Pressure settings 10, 40, 70, 100 and Siphonguard, Inline Reservoir SIPHONGUARD technology 130mmH2O
JJ440 Codman Hakim Precision Valve, Right features 5 operating pressures 10, 40, 70, 100, and 130mmH2OAngle Reservoir
Medical Specialties Australia Pty LtdMS003 Sterile Hydrocephalic Shunts Plastic/magnetic. Programmable valve. 3, 8 settings
Programmer kit and shunts kit.
Medtronic Sofamor Danek Australia Pty LtdSD160 Hydrocephalus Shunt Lumbar peritoneal 84cmSD161 Hydrocephalus Shunt Ventricular/Atrial, CSF Flow Control 38cm-90cm
Shunts, Cont Small Valve
SD163 Hydrocephalus Shunt With Hydrostatic Valve, Delta 12mm-90cmValves/Shunts/BioGlide, Vent Catheters
SD169 Valves, Hydrocephalic Strata Adjustable Delta Valve 12 -16mmSD281 Strata Valve Unitised with Bioglide PSM CSF Flow Valve. Polypropylene and One size only
range acetal plastic base. Silicone elastomer
SD282 Strata Valve Assembly with Bioglide PSM CSF Flow Valves. Polypropylene and One size range acetal plastic base. Silicone elastomer
SD283 Strata Valve with Bioglide PSM range CSF Flow Valve. Polypropylene and 13-16mm x 35-47mmacetal plastic base. Silicone elastomer
SD284 Strata Valve NSC (non siphon control) CSF Flow Valve. Polypropylene and 13-16mm x 23-32mm (0.5-2.0)PSM range acetal plastic base. Silicone elastomer
SD285 Strata Valve Unitised NSC (non siphon Adjustable CSF valve with five symmetric 8-120cmcontrol) PSM range performance level steps. Includes a
strata valve, pre-attached ventricular catheter, and a pre-attached peritoneal catheter. Right Angle Clip. Disposable Quick Release Ventricular Catheter Introducer. Disposable Subcutaneous Catheter Passer. Tuohy-Borst Adapter. Polypropylene and acetal plastic base. Silicone elastomer dome.
PART A - Prostheses List by Category, Groups and Sponsor Page 156 of 666
NEUROSURGICAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD286 Strata Valve Assembly NSC (non siphon Adjustable CSF valve with five One sizecontrol) PSM range symmetrical performance level steps.
Includes a strata valve, an integral distal peritoneal catheter and catheter passer, and a female leur adaptor and prefill tubing. Polypropylene and acetal plastic
SD287 Delta Valve with Bioglide PSM range CSF Flow Valve. Polypropylene and 36-40mm x 9-20mm (0.5-2.0)acetal plastic base. Silicone elastomer dome. Surface of valve bonded with hydrogel (Bioglide surface modification).
SD288 Delta Valve Unitised with Bioglide PSM CSF Flow Valves. Polypropylene and 8-13.5cm x 90-120cm (0.5-2.0)range acetal plastic base. Silicone elastomer
dome. Unitised system includes the valve, integral ventricular and peritoneal catheter (all components connected). Surface of valve bonded with hydrogel (Bioglide surface modification).
SD291 Delta Valve Assembly with Bioglide PSM CSF Flow Valves. Polypropylene and 90-120cm (0.5, 1.0, 1.5, 2.0)range acetal plastic base. Silicone elastomer
dome. Assembly system includes the valve, integral peritoneal catheter, female luer adapter and prefill tubing. Surface of the valve bonded with hydrogel (Bioglide
PART A - Prostheses List by Category, Groups and Sponsor Page 157 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Aqueous/Vitreous Humor Replacement Media
Advanced Medical Optics Australia Pty LtdAO009 Healon 5, Intraocular Viscoelastic Fluid HEALON5- Sodium hyaluronate 23mg/ml 0.6ml
Alcon Laboratories (Aust.) Pty LtdAL007 VISCOAT Viscoelastic Fluid Chondroitin sulfate and sodium 0.5mL packs
Bausch & Lomb SurgicalBL008 Ocucoat Intraocular Fluid 20mg/mL hydroxypropylmethyl cellulose 1mL sterile
for intraocular use
BL015 Amvisc Plus injection 15mg/mL Sodium Hyaluronate for 0.5mL and 0.8mLintraocular use
IQ MedicalIQ002 Ocuvis and Ocumax 2% 20mg/mL hydroxypropylmethyl cellulose 2mL sterile
Hydroxypropylmethylcellulose for intraocular use. Pre-loaded in a sterile syringe with one cannula for injection, in a sterile Tyvek pouch
Aqueous/Vitreous Humor Replacement Medium Kits
Advanced Medical Optics Australia Pty LtdAO007 Viscoelastic Fluid: AMO Vitrax (sodium Surgically Implanted Intraocular 0.65mL
hyaluronate) 30mg/mL, 0.65mL
AO008 Healon, Intraocular Viscoelastic Fluid Sodium Hyaluronate 10mg/ml Healon 0.4ml, 0.55ml & 0.85mlAO010 Healon GV Intraocular Viscoelastic Fluid Sodium Hyaluronate 14mg/mL 0.5mm and 0.85ml
Alcon Laboratories (Aust.) Pty LtdAL006 PROVISC VISCOELASTIC SOLUTION PROVISC contains sodium hyaluronate 0.55mL & 0.85mL packsAL015 Cellugel viscoelastic fluid Hypromellose 2%
Spectrum OphthalmicsSO025 Ophthalin 1% w/v sodium hyaluronate Aqueous/vitreous humour replacement 1 x 1.0mL
medium kits
PART A - Prostheses List by Category, Groups and Sponsor Page 158 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clips, Ligating
Device Technologies Australia Pty LtdDE201 Labtician Tantalum Clips Tantalum 2, 2.5mm
Corneas, Artificial
Hydron Pty Limited t/a Cooper Vision SurgicalHY001 AlphaCor A & P Composition poly 2 (hydroxyethyl AlphaCor A - Diameter 7mm, thickness
methacrylate) 0.6mm, radius of curvature 8.0/8.0mm; AlphaCor P - Diameter 7.0, thickness 0.6mm, radius of curvature 9.0/9.0mm
PART A - Prostheses List by Category, Groups and Sponsor Page 159 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Elastomers, Silicone Rubber
Austmed Pty LimitedAP002 Mira: Scleral Implants Silicone Sponge- Retinal Implant Used in Sponge- Mira 502 Cylinder 2mm, Mira
Scleral Buckling (Silicone Elastomer 5025 Cylinder 2.5mm, Mira 503 Cylinder 3mm, Mira 504 Cylinder 4mm, Mira 505 Cylinder 5mm, Mira 505G Grooved cylinder 5mm, Mira 505T Packer tunnel cylinder 5mm, Mira 510 Half cylinder 5mm, Mira 515 Brucker two-thirds cylinder 5mm, Mira 501 Masciulli oval 2.5mm by 4mm, Mira 506 Vaiser oval 3mm by 5mm, Mira 506G Vaiser grooved oval 3mm by 5mm, Mira 507 oval 5.5mm by 7.5mm, Mira 507G Grooved oval 5.5mm by 7.5mm, Mira 507T Packer tunnel oval 5.5mm by 7.5mm, Mira 511 Half oval 7.5mm, Mira 517 Brucker two-thirds oval 7.5mm, Mira 509 Fuller flat oval 3.5mm by 7.5mm, Mira 509G Fuller grooved flat oval 3.5mm by 7.5mm, Mira 518 Frederick grooved flat oval 2.5mm by 12mm, Mira 508 Frederick flat oval 4mm by 12mm, Mira 508G Frederick grooved flat oval 4mm by 12mm, Mira 513 Snyder 3+ meridional 7mm by 4mm, Mira 514 Snyder 4+ meridional 8mm by 5mm, Mira 516G
PART A - Prostheses List by Category, Groups and Sponsor Page 160 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AP003 Mira: Scleral Implants Solid Silicone- Tires-Mira 286 Wendel Symmetrical OvalTire/Meridional/Wedge/Pad. Retinal Tire 6mm, Mira Symmetrical Oval Tire Implant used in Scleral Buckling 7mm, Mira 287WG Murray wide
(3.5mm) grooved symmetrical tire, 10mm wide, Mira 288 ross symmetrical grooved tire, low profile 10mm wide by 2.5mm, Mira 289 Symmetrical oval tire 10mm, Mira 277Symmetrical tire 7mm, Mira 279 Symmetrical tire 9mm, Mira 78G Grooved symmetrical tire 10mm, Mira 281 Symmetrical tire 12.5mm, Mira 275 Munsen Asymmetrical tire 6mm, Mira 276 Asymmetrical tire 7mm, Mira 278 Brockhurst asymmetrical tire 8.5mm, Mira 280LG Large grooved asymmetrical tire 10mm, Mira 77G Grooved hemisphere 26mm. Meridional- Mira 106 Meridional Implant 6mm by 10.5mm, Mira 112 Curved Meridional implant 12mm by 12mm, Mira 103 Meridional implant 4mm by 15mm. Wedge- Mira 135 Pruett maxi wedge 14mm, Mira Pruett midi wedge 12mm, Mira 190 Spencer sub-implant 5mm by 10mm. Pad- Mira 80 Pad 4mm by 8mm, Mira 22
AP004 Mira: Scleral Implants Solid Silicone-Sleeve. Retinal Implant Sleeves-Mira 70 Sleeve 1mm I.D., Mira used in Scleral Buckling 71 Sleeve 1mm I.D., Mira 72 McNutt (Dimethylmethylvinyl Siloxane Copolymer) Sleeve 1.57mm I.D., Mira 270 Sleeve
AP006 Mira: Scleral Implants Solid Silicone-Band/Strip/Boat/Clip. Bands-Mira 40 Circling Band 2mm, Mira Retinal Implant used in Scleral Buckling 240 Circling Band 2.5mm. Strips-Mira 41(Dimethylmethylvinyl Siloxane Copolymer) Strip 3.5mm, Mira 42 Strip 4mm, Mira
20 Strip 4mm, Mira 219 Strip 4.5mm, Mira 31 Strip 4.5mm, Mira 32 Strip 5mm, Mira 225 Oval Strip 5mm, Mira 220 Strip 6mm. Boats-Mira 60 Boat 2mm, Mira 260 Boat 2.5mm. Clips-Mira 50 Double Tantalum Clip 2mm, Mira 250 Double Tantalum Clip 2.5mm, Mira 51 Singla Tantalum Clip 3.5mm, Mira 52 Joondeph Single Tantalum Clip 4mm
PART A - Prostheses List by Category, Groups and Sponsor Page 161 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Eyelid Weights, Implantable
BR & CT Enterprises Pty LtdBC005 LIDCHAIN Platinum Eyelid Implant Platinum Weights - 0.8, 1.0, 1.2, 1.4, 1.6, 1.8
Device Technologies Australia Pty LtdDE182 Lid Load Gold Eyelid Weights; Gold 1.8, 2.0, 2.2, 2.4, 2.6, 2.8 gramsDE183 Lid Load Gold Eyelid Weights; Gold 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 grams
Fixation Device, Internal, Screw
Surgical HouseSU195 Calcanea Locking Screw Cortical Screw, Titanium Diameter 3.5mm, Length 20mm to 45mm
Fluids, Mechanical Therapeutic Use
Alcon Laboratories (Aust.) Pty LtdAL013 Perfluoron Kits Perfluoro-n-octane for use as a retinal 5mL
surgery additive
AL014 Perfluoron Kits Perfluoro-n-octane for use as a retinal 7mLsurgery additive
AL018 SILIKON 1000 Vitreoretinal Surgical Purified polydimethylsiloxane (silicone oil) 10 mL for use as a post-operative retinal tamponade during vitreoretinal surgery.
Bausch & Lomb SurgicalBL001 Adato Sil-ol Silicone Oil (various Adato Sil-Ol Silicone Oil 1000 10mLBL002 Adato Sil-ol Silicone Oil (various Adato Sil-Ol Silicone Oil 5000 10mLBL003 Adeto Deca (various) Adato Deca Perfluorodecacarbon 5mLBL004 Adato Octa Adato Octa Perfluorooctacarbon 5mLBL016 Oxane LMWC Fractioned Silicone Oil Purified fractioned silicone oil 10mL
PART A - Prostheses List by Category, Groups and Sponsor Page 162 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BL017 Perfluo-octane (Oktaline) Okta-Line Perfluorocarbon Liquid for use as a 5mLretinal surgery additive
BL018 DK Line 100% purified perfluorodecalin Perfluorodecalin 7ml
Device Technologies Australia Pty LtdDE204 Arcaline (Perfluorodecaline) Liquid perfluorocarbon aid for retinal 3ml, 5ml, 7ml
surgery, operative device for retinal surgery, in particular retinal detachment (RD), RD with giant tear etc.
DE205 Arcotane (Perfloro-N-Octane) Liquid perfluoro-N-Octane aid for retinal 5mLsurgery, pre-operative device for retinal surgery, in particular retinal detachment (RD), RD with giant tear, RD with proliferative vitreal retinopathy (PVR) etc.
DE227 LSO Silicone Oil Silicone oil for tamponade use in Vial - 10 mlvitreoretinal surgery
DE228 LSO Silicone Oil Silicone oil for tamponade use in Syringe - 10 mlvitreoretinal surgery
DE229 LSO Silicone Oil Silicone oil for tamponade use in Combo Pack with Syringe - 10 mlvitreoretinal surgery
Spectrum OphthalmicsSO022 FCI Purified Silicone Oil (Solvent Free) Viscosity: 1000 cst/5000 cst: solvent free 10ml
purified silicone oil
SO023 FCI - DECA, FCI - OCTA FCI - DECA: Purified perfluorodecalin, 5mlFCI - OCTA: Purified perfluoro-N-octane
SO024 FCI - DECA, FCI - OCTA FCI - DECA: Purified perfluorodecalin, 7mlFCI - OCTA: Purified perfluoro-N-
Glaucoma Filtration Implants
Advanced Medical Optics Australia Pty LtdAO012 Baerveldt Glaucoma Implant BG 101-350, Non-valved artificial drainage device, Surface area 250, 350, 425mm2
Baerveldt Glaucoma Implant BG 103- composition silicone - smooth, tumble-425, Baerveldt Glaucoma Implant BG polished finish
Spectrum OphthalmicsSO001 T.Flux: Non-Absorbable Galucoma Drain - One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 163 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Intracorneal Rings
Cytosol Ophthalmics Australia Pty LtdCY001 OII PMMA Capsular Tension Ring Capsular Tension Ring - PMMA 12mm and 13mm
Design for Vision Pty LtdDV003 DORC Retinal Implants Bands and strips Bands 2 - 2.5mm, strips 2 - 4mmDV009 Morcher Capsular Tension Ring PMMA Implant 14, 14A, 14CDV010 Morcher Coloboma Diaphram PMMA Implant 96G, 96LDV013 DORC Retinal Implants Tantalum clips 2 - 2.5mmDV014 DORC Retinal Implants Sleeves 0.76 x 1.65mm and 1 x 2.1mmDV015 DORC Retinal Implants Tires 1 - 1.9mm thick, 7 - 11mm wide: 4 stylesDV016 DORC Retinal Implants Sponges 3 - 5mm round, 3 - 5.5mm oval
Device Technologies Australia Pty LtdDE207 Hanita EndoCapsular Ring (ECR) Maintains the stability and a perfect One Size Only
circular contour of the capsular bag equator in cases of intraoperative, traumatic or congenital zonular dialysis.
Emagin Pty LtdEG004 Intracorneal Rings PMMA Thickness 0.210mm - 150 degrees Arc
Length; Thickness 0.250mm - 150 degrees Arc Length; Thickness 0.275mm - 150 degrees Arc Length; Thickness 0.300mm - 150 degrees Arc Length; Thickness 0.325mm - 150 degrees Arc Length; Thickness 0.350mm - 150 degrees Arc Length; Thickness 0.400mm - 150 degrees Arc Length; Thickness 0.450mm - 150 degrees Arc Length
Spectrum OphthalmicsSO002 Tensiobag: Capsular Tension Ring PMMA Diameter 10 - 14mmSO026 Flexiring Capsular Tension Ring Flexizone Hard and Soft Acrylic Diameter 10 - 14 mm
PART A - Prostheses List by Category, Groups and Sponsor Page 164 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Intraocular LensGroup 1 - Anterior Chamber: aphakic, rigid lenses
Advanced Medical Optics Australia Pty LtdAO019 Verisyse AC IOL Aphakic Model 5mm Optic Diameter x 8.5 overall length
Alcon Laboratories (Aust.) Pty LtdAL003 MTAU1-MTAU-7 PMMA + 4 to 28 D
Bausch & Lomb SurgicalBL005 Storz (Coburn) Intraocular Lens 121UV; PMMA Anterior Chamber Intraocular lens 13.75mm length. 6.0mm optic size,
L122UV PMMAA Anterior Chamber Lens 1 piece diopter range 3-30d. L122UV: 6.0mm optic, 13.75mm length, power range; 5.0 to 30.0 Diopters
Emagin Pty LtdEG009 Artisan Anterior Chamber Intraocular Lens Aphakia Model 5.00mm Optic Diameter x 8.5 in overall
Composition: PMMA length
Surface Modification SuffixAdvanced Medical Optics Australia Pty Ltd
AO001 Intraocular Lens: Model AC 51B Duralens PMMA, Anterior Chamber IOL 6.00 mm Optic Diameter x 13.0mm in overall length
AO011 Posterior Chamber IOL; Pharmacia CeeOn Posterior chamber, heparin coated 812C:+8.0 to +40.0 diopter increments, Also grouped in Heparin Surface Modified AC IOL Model , PMMA lenses, One piece, biconvex. 722C: +8.0 to +30.0 diopter increments, Intraocular Lens Group
812C, 722C, 757C, 808C CeeOn Anterior 757C: -10.0 to +7.0 diopter increments 3 (M) chamber heparin coated PMMA lenses 808C: +8.0 to +30.0 diopter increments 352C. Models 812C, 722C, 757C, 808C and 352C: - +8.0 to +30.0 diopter
Group 2 - Anterior Chamber: phakic, rigid lenses.
Advanced Medical Optics Australia Pty LtdAO016 Verisyse AC IOL Phakic Intraocular Lens: Model Myopia. 5mm Optic Diameter x 8.5 overall length;
Composition: PMMA 6mm Optic Diameter x 8.5 overall length
AO017 Verisyse AC IOL Phakic Intraocular Lens: Model 5mm Optic Diameter x 8.5 overall lengthHyperopia. Composition: PMMA
PART A - Prostheses List by Category, Groups and Sponsor Page 165 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Emagin Pty LtdEG006 Artisan Anterior Chamber Intraocular Lens Phakic Intraocular Lens: Model Myopia 5.00mm Optic Diameter x 7.5 in overall
Composition: PMMA length; 5.00mm Optic Diameter x 8.5 in overall length; 6.00mm Optic Diameter x 8.5 in overall length
EG007 Artisan Anterior Chamber Intraocular Lens Phakic Intraocular Lens: Model Hyperopia 5.00mm Optic Diameter x 8.5 in overall length
Toric SuffixAdvanced Medical Optics Australia Pty Ltd
AO018 Verisyse AC IOL Phakic Intraocular Lens: Model Toric 5mm Optic Diameter x 7.5 overall length
Emagin Pty LtdEG008 Artisan Anterior Chamber Intraocular Lens Phakic Intraocular Lens: Model Toric 5.00mm Optic Diameter x 7.5 in overall
Composition: PMMA length
Group 3 - Posterior Chamber: aphakic, rigid lenses
Advanced Medical Optics Australia Pty LtdAO003 Intraocular Lens: Allergan AMO Duralens Duralens, PMMA, Posterior Chamber 5.5mm-6.5 mm Optic Diameter x
Posterior Chamber IOL Model 12.0mm-13.5mm in overall length. PS42ANB, PS53ANB, PS60ANB,
Alcon Laboratories (Aust.) Pty LtdAL002 Intraocular Lens: MODIFIED C PMMA Other:PMMA Range of Powers:-10 to +34 D
PC IOL MODEL MZ60BD, MODIFIED PMMA PC IOL Model MZ20BD, CANTILEVER PMMA PC IOL MODEL CVC1U, Modified PMMA PC IOL Model MZ30BD, PMMA PC, IOL Model MC60BD, PMMA PC, IOL Model MC50BD, PMMA PC, IOL Model CZ70BD, MODIFIED C PMMA PC IOL MODEL 251.60 (MC50BM), MODIFIED C PMMA PC IOL MODEL 251.61 (MC51BM), MODIFIED C PMMA PC IOL MODEL 551.61 (MC60CM), Alcon JF30BD Cantilever PMMA PC IOL, Alcon Cantilever Model LX90BD PMMA PC IOL, Alcon Cantilever Model LX10BD PMMA PC IOL, Alcon Cantilever Model LC80BD PMMA PC IOL, PMAA PC
PART A - Prostheses List by Category, Groups and Sponsor Page 166 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Bausch & Lomb SurgicalBL006 Posterior chamber IOLS model P359 UV, PMMA Posterior Chamber lens 1 piece; 12.25mm to 13.75mm length. 5.5mm to
P399 UV, 68 UV, 95 BUV, or lolab PC 7mm optic size, diopter range -4.5 - 45d One Piece, model 6741B, 8591B, 8191B; to 10 - 34d; EZE-Fit 65: 6.5mm optic, Model EZE-Fit 65 13.35mm length, Power range: 10.0 to
Group 4a - Posterior Chamber: aphakic, foldable, no edge modification, haptic plate lenses
Bausch & Lomb SurgicalBL010 Chiroflex Model C11UB Intraocular Lens Foldable Plate Haptic 10.50m length, 6.0mm optic size, diopter
Silicone Posterior Chamber Foldable Plate range 10-30d Haptic Lens 1 piece
ConceptVision Australia Pty LtdCS001 Staar foldable silicone intraocular lens: Plate haptics 6.0mm; Polymide haptics 10.8mm - 13.5mm length; KS-1 5.5mm, Also grouped in
Model AA4203VF; Model AA4204VF; 5.5 or 6.3mm optic; KS-1 5.5mm, KS-3 KS-3 6.0mm; Intraocular Lens Group AA4204VL; Model AQ2010V; Model 6.0mm Dia preloaded foldable intraocular AQ2017V; Model AQ2003V; KS-1 & KS-3 Preloaded Intraocular Lens
Toric SuffixConceptVision Australia Pty Ltd
CS002 Staar Toric foldable silicone intraocular Plate haptics 6.0mm optic 10.8mm - 11.2mm lengthlens: Model AA4203TF; Model
Group 4b - Posterior Chamber: aphakic, foldable, no edge modification lenses
Advanced Medical Optics Australia Pty LtdAO005 Intraocular Lens: Allergan Model SI- PhacoFlex II SI-30NB Silicone or 6.0 mm Optic Diameter x 13.0mm in
30NB Silicone PC IOL; or AMO model PhacoFlex II SI-40NB Silicone; Foldable overall length. SI-40NB Silicone PC IOL
AO015 CEEON R Intraoccular Lens Foldable intraocular lenses - ultraviolet 5-10 dioptre in 1.0 dioptre increments; light absorbing posterior chamber 1.3-30 dioptre in 0.5 dioptre increments
Bausch & Lomb SurgicalBL007 Hydroview Intraocular lens Model H60M Foldable Hydrogel Lens Hydrogel 12.50mm length, 6.0mm optic size,
Posterior Chamber Foldable lens 1 piece diopter range 15-30d
BL009 Soflex UV Absorbing Silicone Posterior Foldable Intraocular Lens Silicone 13.00mm length, 6.0mm optic size, Chamber IOL Model LI61U Posterior Chamber Foldable Lens 3 piece diopter range 5-30d
PART A - Prostheses List by Category, Groups and Sponsor Page 167 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ConceptVision Australia Pty LtdCS003 Staar foldable silicone intraocular lens: Polyimide haptics 6.3mm optic - low 14.0mm length
Model AQ 5010V
Group 4c - Posterior Chamber: aphakic, foldable, posterior edge modification lenses
Alcon Laboratories (Aust.) Pty LtdAL004 Intraocular Lens: Alcon Acrysof Model Foldable Acrylic Multi-piece Lens Range of Powers: -5 to +30 D
MA60BM PC IOL, Alcon Acrysof Model MA30BA PC IOL, Alcon Acrysof model MA50BM PC IOL, ACRYSOF IOL MODEL MA60MA
AL012 Alcon Acrysof Model MA30AC PC IOL, Foldable acrylic multi-piece lens, +10 to +30 DAlcon Acrysof Model MA60AC PC IOL asymmetric optic/consistent edge
Group 4d - Posterior Chamber: aphakic, foldable, anterior and posterior edge modification
Advanced Medical Optics Australia Pty LtdAO002 Sensar AR40 Monofocal Acrylic IOL, Soft Acrylic, Foldable, UV Absorbing, 6 mm Optic Diameter x 13mm in overall
Sensar OptiEdge AR40e Foldable Acrylic Posterior length.
AO006 Clariflex, Model CLRFLXB Posterior Foldable Silicone IOL with OptiEdge One size onlyChamber Intraocular Lens
AO013 Ceeon Model 911A Edge Foldable UV Silicon, foldable, UV absorbable 5 - 10D in 1.0 diopter increments, 10.5 - Absorbing Posterior Chamber IOL intraocular lens with equibiconvex design 30D in 0.5 diopter increments
and square optic edge
Alcon Laboratories (Aust.) Pty LtdAL011 Intraocular Lens: Alcon Acrysof Model Foldable Acrylic Single-piece Lens, Range of Powers: +6 to +40 D
SA30AL, Alcon Acrysof Model SA60AT, asymmetric optic/consistent edge SA30AT Intraocular Lens; Alcon Acrysof PC IOL Model SA65AT
Bausch & Lomb SurgicalBL019 Akreos Fit acrylic foldable posterior Composition: Hydrophilic acrylic 10.0 to 15.0 Diopter in 1.0 Diopter
chamber intraocular lens polymer. Packaged in lens folding device increments; 15.0 to 25.0 Diopter in 0.5 in a sterile vial. Modified C-Loop design Diopter increments; 25.0 to 30.0 Diopter
in 1.0 Diopter increments
BL020 Akreos Adapt acrylic foldable posterior Composition: Hydrophilic acrylic 10.0 to 15.0 Diopter in 1.0 Diopter chamber intraocular lens polymer. Packaged in lens folding device increments
in a sterile vial. Four haptic design 15.0 to 25.0 Diopter in 0.5 Diopter
PART A - Prostheses List by Category, Groups and Sponsor Page 168 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BL021 SoflexSE, Intraocular lenses, Posterior Composition: silicone, Lenses - foldable, Range of powers: 5.0 to 30.0 Diopter - Chamber posterior chamber intraocular lenses Optic diameter 6.0mm; 13.0mm length
Kevin Grundy (IBD) Pty LtdKG001 Rayner C-Flex Hydrophilic HEMA-MMA copolymer, 5.75mm dia optic, 12.00mm dia overall
foldable with injector
KG002 Superflex Hydrophilic HEMA-MMA copolymer, 6.25mm dia optic, 12.5mm dia overallfoldable with injector
Aberration Technology SuffixAdvanced Medical Optics Australia Pty Ltd
AO014 Tecnis TM Intraocular Lens Foldable Intraocular Lenses - Ultraviolet 5-10 dioptre in 1.0 dioptre increments; light absorbing posterior chamber 10.5 - 30 dioptre in 0.5 increments
Blue Light Filter SuffixAlcon Laboratories (Aust.) Pty Ltd
AL016 Alcon Acrysof Natural Model SN60AT Foldable Acrylic Single-piece Lens, +6 to +40Dasymmetric optic/consistent edge, with blue light protection
Blue Light Filter, Aberration Tech SuffixAlcon Laboratories (Aust.) Pty Ltd
AL021 Alcon AcrySof SN60WF Foldable Acrylic Single-piece Lens with +16.0 D to +26.0 DBlue Light Protection and Aspheric
Blue Light Filter, Pre-Packaged SuffixAlcon Laboratories (Aust.) Pty Ltd
AL019 AcrySof Model SN60AS Foldable Acrylic Single-piece lens, in +6 to +40 Dcartridge, with blue light protection
Pre-Packaged SuffixAlcon Laboratories (Aust.) Pty Ltd
AL020 AcrySof Model SA60AS Foldable Acrylic Single-piece Lens, in +6 to +40 Dcartridge
T,BLFAlcon Laboratories (Aust.) Pty Ltd
AL023 Alcon AcrySof Toric PC IOL Models Posterior chamber, UV absorbing, SN60T3 (1.50 D cylinder), SN60T4 foldable, acrylic, toric, single piece lens (2.25 D cylinder), SN60T5 (3.00 D with blue light protection cylinder), SN60T6 (3.75 D cylinder),
SN60T7 (4.50 D cylinder), SN60T8 (5.25 D cylinder), SN60T9 (6.00 D
PART A - Prostheses List by Category, Groups and Sponsor Page 169 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Toric SuffixKevin Grundy (IBD) Pty Ltd
KG003 Rayner Standard Toric C-Flex Hydrophilic HEMA-MMA copolymer, 5.00mm dia optic, 12.00mm dia overall, foldable with injector cyls 2.0D to 6.0D in 2D increments
KG004 Rayner Premium Toric C-Flex HEMA-MMA copolymer, foldable with 5.75mm dia optic, 12.00mm dia overall, injector cyls 1.5D to 11.0D in 0.5D increments
Group 5a - Posterior Chamber: aphakic, foldable, multifocal/bifocal lenses
Advanced Medical Optics Australia Pty LtdAO004 Intraocular Lens: Allergan AMO Array Array Multifocal SA40N, Silicone, 6.0 mm Optic Diameter x 13.0mm overall
Multifocal UV Absorbing Silicone Foldable IOL length. Posterior Chamber IOL Model SA-40N
AO020 ReZoom Acrylic Multifocal Intraocular Acrylic, foldable, posterior chamber, 6.0mm Optic Diameter x 13.0mm overall intraocular lens length
Aberration Technology SuffixIQ Medical
IQ001 UltraChoice 1.0 Rollable Thinlens Model Acrylic, single piece, rollable, refractive Dioptric powers from 10.0 to 30.0 DPHC001 multifocal with monofocal function
meniscus optic, accommodating intraocular lens with 50 micron edge
Group 5b - Posterior Chamber: aphakic, foldable, anterior and posterior edge modification,
Alcon Laboratories (Aust.) Pty LtdAL017 Alcon AcrySof ReSTOR PC Diffractive Posterior Chamber, UV absorbing, +10.0 to +30.0 D
IOL Model SA60D3 foldable, acrylic, single piece lens with apodised diffractive optic
BLFAlcon Laboratories (Aust.) Pty Ltd
AL022 Alcon AcrySof ReSTOR PC Diffractive Posterior Chamber, UV absorbing, +10.0 to +30.0 DIOL Natural Model SN60D3 foldable, acrylic, single piece lens with
apodised diffractive optic and blue light
PART A - Prostheses List by Category, Groups and Sponsor Page 170 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5c - Posterior Chamber: aphakic, foldable, multifocal, accommodative lenses.
ConceptVision Australia Pty LtdCS004 C & C Vision Crystalens Model AT-45 Silicon Multipiece Folding Optic Diameter: 4.5mm; Overall Length:
Accommodating Intraocular Lens 11.5mm
Ophthalmic Accessories
Advanced Medical Optics Australia Pty LtdAO021 Stabileyes Capsular Tension Ring Polymethylmethacrylate (PMMA) Implant 12mm ring, and 13mm ring
Alcon Laboratories (Aust.) Pty LtdAL001 Capsular Tension Rings - 10.0 - 12.0 compressed, 12.3 - 14.5
uncompressed
Emagin Pty LtdEG001 Capsular Tension Rings Clear PMMA Implant 10/08, 12/10, 13/11mmEG002 Iris Prosthetic System Single Element PMMA Implant 1/4, 1/3mmEG003 Iris Prosthetic System Double Element PMMA Implant 2/3, 2/4mmEG005 Capsular Tension Rings Coloured PMMA Implant 10/08, 12/10, 13/11mm
Procedure Trays, Surgical
Alcon Laboratories (Aust.) Pty LtdAL005 DUOVISC VISCOELASTIC SYSTEM PROVISC contains sodium hyaluronate, Small & large packs
VISCOAT contains chondroitin sulfate and sodium hyaluronate
Prostheses, Evisceration
Device Technologies Australia Pty LtdDE188 Acrylic Implant Acrylic 12, 14, 16, 18, 20mm.DE202 John Weiss Glass Mule Globes Glass No: 12, 14, 16, 18, 20mm
PART A - Prostheses List by Category, Groups and Sponsor Page 171 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE203 Katena Plastic Eye Sphere's Non Sterile Acrylic No: 10, 12, 14, 16, 18, 20, 22mm
Prostheses, Eyelid
Design for Vision Pty LtdDV005 Gold Eyelid Load Small Range - standard 0.6g, 0.8g, 1.0g, 1.2g, 1.4g, 1.6g DV007 Gold Eyelid Load Large Range 1.8g, 2.0g, 2.2g, 2.4g, 2.6g, 2.8g DV012 Gold Eyelid Load Small range - thin profile 0.6g, 0.8g, 1.0g, 1.2g, 1.4g, 1.6g
Spectrum OphthalmicsSO017 FCI Ptose-up Expanded PTFE 15cm long x 2 or 3mm wide x 0.35mm SO018 FCI Eyelid Spacer (Upper & Lower Lids) Expanded PTFE Upper Lid: 20 x 4-16 x 0.35mm; Lower
Lid: 20 x 4-16 x 1mm
Prostheses, Orbital Rim
Spectrum OphthalmicsSO006 FCI Orbital Implants Orbital Implant, Bioceramic (Aluminium Bioceramic diameter, 12, 14, 16, 18, 20,
Oxide)/Hydroxyapatite (Synthetic) 21, 22mm; Synthetic Diameter, 10, 12, 14, 16, 18, 20, 22mm
SO007 FCI Orbital Implants Mesh wrapped orbital implant: mesh Bioceramic diameter: 16, 18, 20, 22mm; wrapped bioceramic (aluminium oxide), Synthetic Hydroxyapatite diameter: 16, mesh wrapped hydroxyapatite 18, 20, 22mm(synthetic), mesh wrap (polyglycolic
SO008 FCI Orbital Implants Dexon Mesh (Polyglycolic Acid Mesh) Mesh: 8 x 8 cm, 4-0 Suture: 45 cmincludes resorbable 4-0 polyglycolic acid suture
SO019 FCI Obrbital Implants Peg & Sleeve Standard Large
Retinal, Detachment, Repair, Prostheses
Bausch & Lomb SurgicalBL011 Storz E5381 Silicone Strip Silicone Sleeve 1.65mm to 2.2mm diameter, length
6.1mm to 30mm
PART A - Prostheses List by Category, Groups and Sponsor Page 172 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BL012 Storz E5395 3 Cylindrical Sponge Implant Retinal Fixation Device 2.3mm x 2.5mm x 80mm, to 7.5mm x 7.5mm x 100mm
BL013 Storz E5381 Silicone Strip Silicone Tire Outside diameter 30.2m to 33.6mm, inner diameter 26mm, overall length 10.4mm to 125mm
BL014 Storz E5381 Silicone Strip Circling Band Overall length 10.4mm to 125mm
Scleral Buckling Devices
Device Technologies Australia Pty LtdDE176 Silicon Retinal Implant Mould One size onlyDE178 Silicon Retinal Implant Sponge 2.5 x 4.0 x 80mm, 3.0 x 5.0 x 100mm,
3.25 x 7.0 x 80mm, 5.5 x 7.5 x 80mm, 1.5 x 80mm, 2.0 x 80mm, 2.5 x 80mm, 3.0 x 80mm, 4.0 x 80mm, 5.0 x 80mm,
DE179 Silicon Retinal Implant Tire 7.0, 9.0, 12.5, 6.0, 8.5, 10.0mmDE180 Silicon Retinal Implant Sleeve 1mm, .76mm, 1.5mmDE181 Silicon Retinal Implant Band 0.75 x 2.0 x 125mm, 0.60 x 2.5 x
125mm, 0.75 x 2.5 x 125mm
Spectrum OphthalmicsSO009 FCI Scleral Buckling Devices Band/strip: solid silicone Band - 2.0 x 0.75mm Type 40, 3.5 x
0.75mm Type 41, 4.0 x 1.25mm Type 42, 2.5 x 0.6mm Type 240, Morin 3.5 x 0.6mmStrip - 5.7mm Type 20, 7.2mm Type 31, 9.2mm Type 32, 6mm Type 219, 7.5mm
SO010 FCI Scleral Buckling Devices Fixation Sleeve: Solid silicone O.D: 1.65 to 2.41mm, Length 30mmSO011 FCI Scleral Buckling Devices Tire: Solid Silicone Symmetrical: (2.5 mm Groove, 7 to 9mm
wide), Biconvex: (2.5mm Groove, 7 to 10mm wide), Asymetrical: (2.5mm Groove, 7 to 10mm wide)
PART A - Prostheses List by Category, Groups and Sponsor Page 173 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SO012 FCI Scleral Buckling Devices Sponge/Cord: Silicone Cord: 1.0 to 5.0mm O.D. x 150mm length; Half Cord: 3.0mm to width x1.5mm to 2.5mm height x150mm; Circular Sponge: 3 to 5mm; Oval Sponge: 2 to 5.5mm x 4 to 12mm; Half Sponge: 2 to 3.1mm x 4 to 7.5mm; Grooved Sponge: 3 to 5mm x 5 to 12mm; Gain Sponge: 6 x 2.5mm; Sahal Sponge: 4 to
SO013 FCI Scleral Buckling Devices Strip: Solid Silicone Strip: 1.4 x 4.4 x 100mm, Morin Strip: 7mm wide x 100mm long, Caputo Zip Strip: 7 to 9mm wide x 120mm long, Korobelnik Oval Strip: 2 x 5mm
SO014 FCI Scleral Buckling Devices Band: Solid Silicone Devin Band: 1 x 4 x 120mm, Ducournau Band: height 2 to 2.5 x 5.5 to 7.5mm x length 120mm, Ducournau Band II: 2.1 x 5.5 x 120mm
SO015 FCI Scleral Buckling Devices Band: Expanded PTFE Ducournau Band: 2.5 x 5.5 to 7.0mm x 120mm, Band: 0.5mm to 2.1 x 2.5mm to 15 x 120mm
SO016 FCI Scleral Buckling Devices Sponge/Strip: Expanded PFTE Circular Sponge: 3 to 5 x 90mm, Oval Sponge: 2 to 4mm x 3 to 5 x 90mm, Half Sponge: 2.5 x 7.5 x 120mm; Strip: 9 x
Sleeves
Device Technologies Australia Pty LtdDE187 P-K Flat Headed Peg and Sleeve Set Titanium One size only
Spheres, Eye
Device Technologies Australia Pty LtdDE184 Hydroxyapatite Ocular Implant (orbital Coral 16 - 22mm
sphere)
PART A - Prostheses List by Category, Groups and Sponsor Page 174 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tubes, Lacrimal
Austramedex (VIC) Pty LtdAR022 Medpor Coated Tear Drain Jones Tube with polyethylene coating. 11 sizes, 3.5mm x 14mm to 3.5mm x
Models 81114 - 81120, 81122, 81124, 81126 and 81128
Design for Vision Pty LtdDV021 Eyetec DCR Tubes Stainless steel, silicone tubing, Crawford 32cm
lacrimal intubation set
DV022 Eyetec DCR Tubes Stainless steel, silicone tubing, Bodkin 30cmlacrimal intubation set
DV023 Eyetec DCR Tubes Stainless steel, silicone tubing, 30cmCanaliculus lacrimal intubation set
Spectrum OphthalmicsSO020 FCI Lacrimal Intubation Set Silicone Tubing/Silicone Plug/Metal Bika: 0.64mm O.D. Tube/80 x 0.8mm
Probes/Polypropylene Thread probes, Bika 1.18: 1.18mm O.D. Tube/40 x 1.2mm probes, Bika for DCR: 0.94mm O.D. Tube/50 x 0.8mm probes, Infant Bika 0.64mm O.D. Tube/55 x 0.7mm probes, Infant Bika II: 0.64mm O.D. Tube/60 x 0.8mm probes, Besancon-Nancy Probe: 0.64mm O.D. Tube/80 x 0.8mm probes, Crawford Probe: 0.64mm O.D. Tube/0.7mm thick probes, FCI 2 Probe: 0.64mm O.D. Tube/80 x 0.8mm probes, Ptosis Probe: Tube/80 x 0.8mm probes, Mini Monoka: 0.64 x 40mm Tube/2mm Plug, Perforated Mini Monoka: 0.64 x 40mm Tube/2mm, Perforated Plug, Medium Collarette Monoka, Wide Collarette Monoka: 0.64mm O.D. Tube/80 x 0.8mm probes/4mm Plug, Wide Collarette Monoka for Infants: 0.64mm O.D. Tube/60 x 0.8mm probes/4mm Plug, Ritleng Lacrimal Intubation Set: 0.64mm O.D. Tube/ Polypropylene thread, Self-Threading Monoka Ritleng Type: 0.64mm O.D. Tube/Polypropylene thread/4mm Plug, Medium Collarette Self-Threading
PART A - Prostheses List by Category, Groups and Sponsor Page 175 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SO021 FCI Lacrimal Intubation Set PVP Coated Silicone Tubing/PVP Coated PVP Bika: 0.64mm O.D. Tube/80 x Silicone Plug/Metal Probes/Polypropylene 0.8mm probes, PVP Differential Bika: Thread 0.64 & 1.18mm O.D. Tube/40 x 1.2mm
probes, PVP Bika for DCR: 0.94mm O.D. Tube/50 x 0.8mm probes, PVP Infant Bika 0.64mm O.D. Tube/55 x 0.7mm probes, PVP Infant Bika II: 0.64mm O.D. Tube/60 x 0.8mm probes, PVP Besancon-Nancy Probe: 0.64mm O.D. Tube/80 x 0.8mm probes, PVP Ritleng Lacrimal Intubation Set: 0.64mm O.D. Tube/Polypropylene thread, PVP Mini Monoka: 0.64 x 40mm Tube/2mm Plug, Wide Collarette PVP Monoka: 0.64mm O.D. Tube/80 x 0.8mm probes/4mm Plug, Self-Threading PVP Monoka Ritleng Type: 0.64mm O.D., Tube/ Polypropylene thread/4mm Plug, PVP Metaireau Tube Oval Collar: 40mm Tube/4mm Plug, PVP Metaireau Tube Round Collar: 40mm Tube/4mm Plug, Lacosystem: Tube /Probe/Polypropylene
Tubing, Other
Device Technologies Australia Pty LtdDE177 Lester Jones Tear Duct Tubes Glass 3 x 9 to 16mm, 3.5 x 9 to 18mm, 4.0 x 9
to 24mm, 5.0 x 9mm
DE199 The Gladston/Putterman Tubes by Glass 3.0mm x 10 to 16mm; 3.5mm x 9 to Gunther Weiss 18mm; 4.0mm x 12 to 19mm
DE200 Bayliss Tubes by Gunther Weiss Glass 3.0mm x 10 to 16mm; 3.5mm x 9 to 18mm; 4.0mm x 12 to 19mm
Valves, Eye
Design for Vision Pty LtdDV011 Ahmed Glaucoma Valve Silicone Implant Adult or PaediatricDV017 Molteno Implant Single plate One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 176 of 666
OPHTHALMIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DV018 Molteno Implant Single plate - dual chamber One size onlyDV019 Molteno Implant Double plate One size onlyDV020 Molteno Implant Double plate - dual chamber One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 177 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Anchor, Fixation
Biomet Australia Pty LtdBI320 Arthrotek Harpoon System Suture Anchor, Metal, Stainless Steel 2.0mm & 3.0mm
Device Technologies Australia Pty LtdDE063 Parachute Corkscrew Suture Anchor PLA & Titanium 3.5mm - 5mmDE064 Corkscrew Suture Anchor Titanium alloy 3.5 - 6.5mm x 5.0mmDE066 FASTak Titanium Suture Anchor Titanium alloy One size onlyDE074 Fastak II Anchor Titanium alloy One size onlyDE162 FASTak Suture Anchor (Small Bone) Titanium suture anchor, preloaded with Dia 2.4mm x length 7.5mm
polyester suture
DE196 Corkscrew Suture Anchor Titanium alloy with Fibrewire suture 3.5mm - 6.5mmDE198 Fastak Suture Anchor (Small Bone) With Fibrewire Suture Dia. 2.4mm x Length 7.5mmDE225 Fastak Anchor Titanium with fibrewire suture 2.8mm x 11.7mm
Endotherapeutics Pty LtdET044 Resofix Anchor Resofix anchor is a 2-shell expansion bolt Resofix - S Anchor - 10mm; Resofix - P
made of amorphous poly DL-Lactide Anchor - 10mmresorbablel polyester
Howmedica IncorporatedHW373 Howmedica Mainstay Soft Tissue Anchor With suture - Titanium 4.5 anchor with #2 and #5 suture, 2.7
anchor with #0 suture
HW374 Howmedica Mainstay Soft Tissue Anchor Without suture - Titanium 4.5, 3.5 and 2.7 anchorHW375 Howmedica Mainstay Soft Tissue Anchor Zip anchor - Titanium Sip 4.5 anchor with #5 suture and #2
suture 2 strands, zip 3.5 anchor with #2 suture and #0 suture 2 strands, zip 2.7
Johnson & Johnson Medical Pty LtdJJ076 Mitek Ethibond Knotless Suture Anchor Titanium anchor 2.7 x 10.8 mmJJ077 Mitek Polypropylene Meniscus Fastner Polypropylene anchor 6 & 8mm x 4mm JJ097 Mitek Fastin RC Anchor Titanium Suture Anchor 5 x 13.5mmJJ124 Intrafix Tibial Sheath High density polyethylene sheath 7 to 10mm x (15 to 30mm)
PART A - Prostheses List by Category, Groups and Sponsor Page 178 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Linvatec AustraliaLV003 Ultrafix RC, Anchor Soft Tissue Re-attachment - Titanium 2.9mm predeployed diameterLV004 Ultrafix MiniMite Suture Anchor Soft Tissue Re-attachment - Titanium 2.3mm predeployed diameterLV005 Ultrafix MiniMite StitchPak Suture Soft Tissue Re-attachment - Stainless 2.3mm predeployed diameterLV006 Ultrafix RC StitchPak Suture Anchor Soft Tissue Re-attachment - Titanium 2.9mm predeployed diameterLV024 Ultrafix MicroMite Small Joint Anchor Suture Anchoring Device - Titanium 1.5mm predeployed diameterLV027 Pre-Loaded Ultrafix RC Anchor Surgical Grade Stainless Steel, preloaded Dia 2.9mm, length 6.5mm
with 2 #2 sutures
Smith & Nephew Surgical Pty LtdSN651 OBL Anchor System Preloaded Soft Tissue Anchor System Anchor sizes - Titanium: 2.8, 3.5, 4.0
Material: Titanium Alloy or Polyacetal 5.0, 6.5mm Anchor size - Polymer: Polymer. Comes with Insertion device and 2 Braided Polyester Sutures
SN652 OBL Anchor System Soft Tissue Anchor System Non- 4.0 and 6.5mmpreloaded Material: Titanium Alloy
SN703 TwinFix AB Absorbable suture anchor PLA 5.0 with Dia 5.0, overall length 15.5threaded dialator
SN714 TwinFix Quick-T One Size Only
Stryker Australia Pty LtdSK048 Stryker Cuff Anchor Titanium anchor kit for soft tissue Length 5-8mm
reattachment
SK176 Stryker Cuff Anchor Bio Zip PLLA anchor for soft tissue Dia 3 - 8mmligament/tendon fixation
SK177 Stryker Cuff Anchor Glenoid Titanium anchor kit for soft Dia 2 - 3mmtissue reattachment
ZimmerZI161 Zimmer Internal Fixation Systems: Cable Cable-Ready Stainless Steel 1.3 mm
System
ZI163 Zimmer Internal Fixation Systems: Cable Cable-Ready Plate Cable Stainless Steel 610 mm longSystem
ZI164 Zimmer Internal Fixation Systems: Cable Cable-Ready GTR Distal end Cable - 635 mm longSystem Cobalt Chrome
ZI166 Zimmer Internal Fixation Systems: Cable Cable-Ready Trochanter Grip CoCr 50cm longSystem
PART A - Prostheses List by Category, Groups and Sponsor Page 179 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI167 Zimmer Internal Fixation Systems: Cable Cable-Ready 6 Hole Plate - Stainless Steel 187mm longSystem
ZI168 Zimmer Internal Fixation Systems: Cable Cable-Ready 8 Hole Plate - Stainless Steel 246mm longSystem
ZI169 Zimmer Internal Fixation Systems: Cable Cable-Ready 10 Hole Plate - Stainless 305mm longSystem
ZI170 Zimmer Internal Fixation Systems: Cable Cable-Ready Pin - Stainless Steel 35, 40, 45, 65mm longSystem
ZI173 Zimmer Internal Fixation Systems: Cable Cable-Ready GTR Cable - Proximal 635mm longSystem
ZI174 Zimmer Internal Fixation Systems: Cable Cable-Ready Stainless Steel Cable 1.8mmSystem
ZI234 Cable System Cable Ready, Cable Button 2,5mm - 5,0mm
Anchors, Synthetic Ligament
Johnson & Johnson Medical Pty LtdJJ075 Mitek Ligament Anchor Titanium anchor 6mm x (15 to 25mm)JJ082 Mitek Mini Anchor Threader Tab Titanium Suture Anchor 1.8 x 5.4mmJJ083 Mitek GII Anchor Threader Tab Titanium Suture Anchor 2.4 x 8.8mmJJ084 Mitek Rotator Cuff Anchor Threader Tab Titanium Suture Anchor 2.8 x 11mmJJ085 Mitek Super Anchor Threader Tab to bone Titanium Suture Anchor 2.8 x 11.4mmJJ086 Mitek Tacit Anchor Threader Tab Titanium Suture Anchor 2.0 x 3.6mmJJ087 Mitek Tacit Quick Anchor Titanium Suture Anchor 2.0 x 3.6mmJJ089 Mitek GII QuickAnchor Plus Titanium Suture Anchor 2.4 x 8.8mmJJ091 Mitek Mini QuickAnchor Plus Titanium Suture Anchor 1.8 x 5.4mmJJ093 Mitek Rotator Cuff Quick Anchor Plus Titanium Suture Anchor 2.8 x 11mmJJ095 Mitek Super Quick Anchor Plus Titanium Suture Anchor 2.8 x 11.4mmJJ096 Mitek Fastin Anchor Titanium Suture Anchor 3 x 8.4mm, 4 x 9.7mm, 5.2 x 11.5mmJJ100 Micro Quick Anchor Titanium Suture Anchor 1.3 x 3.7mm
PART A - Prostheses List by Category, Groups and Sponsor Page 180 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Linvatec AustraliaLV001 Linvatec Super Revo Soft Tissue Anchor Contains screw, driver and suturesLV002 Li Medical Ultrasorb Bioabsorable Suture Contains anchor, non-absorbable suture,
Anchor surgical needles
LV007 Bio Twist Bioabsorbable Rotator Cuff Soft Tissue Re-attachment - PLLA 6mm diameter
Bolts, Bone
Mathys AustraliaMA212 AO/ASIF Intermedullary Nails Locking bolts - steel 3.9 - 4.9mm , length 18 - 100mmMA213 AO/ASIF Intermedullary Nails Locking bolts 3.0mm-6.0mm Dia 10-150mm Length
Bone Matrix Implants, Artificial
Advanced Surgical TechnologiesAD150 Osteoset Bone Void Filler Calcium Sulphate 50ccAD151 Osteoset Bone Void Filler Calcium Sulphate 4.8mm Pellets 10ccAD152 Osteoset T Pellets Calcium sulphate with tobramycin 10, 20ccAD153 Osteoset T Pellets Calcium sulphate with tobramycin 5ccAD155 Osteoset T Pellets Calcium sulphate with tobramycin 50ccAD209 Osteoset Pellets - Bone Graft Substitute Calcium Sulphate 4.8mm Pellets 20ccAD221 Osteoset Bone Void Filler Calcium Sulphate 3mm & 4.8mm Pellets 5ccAD222 Osteoset Bone Void Filler Calcium Sulphate 3mm Syringe 1.25ccAD223 Osteoset Bone Void Filler Calcium Sulphate 4.8mm Syringe 5ccAD224 Osteoset Bone Void Filler Calcium Sulphate 3mm Pellets 10ccAD225 Osteoset MIIG Injectable Calcium Sulphate Bone Void 15cc
Filler, Includes Syringe
AD227 Osteoset MIIG X3 Injectable Calcium Sulphate Bone Void 5ccFiller, Includes Syringe
PART A - Prostheses List by Category, Groups and Sponsor Page 181 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD228 Osteoset MIIG X3 Injectable Calcium Sulphate Bone Void 15ccFiller, Includes Syringe
AD240 Osteoset MIIG Injectable Calcium Sulphate Bone Void 5ccFiller, Includes Syringe
Biomet Australia Pty LtdBI023 Endobon Pins Cylinder, Hydroxyapatite 13-16mmBI024 Bone Cement Endobon Bone Substitute Cylinder, Hydroxyapatite 9-12mm
Material
BI025 Bone Cement Endobon Bone Substitute Granules, Hydroxyapatite Type I or Type IIMaterial
BI026 Bone Cement Endobon Bone Substitute Block, Hydroxyapatite 5x5x10, 12.5x12.5x10, 20x20x10Material
BI686 Calcigen-NaP Bone Substitute, Calcium Sodium 5-25gmsBI691 Calcigen-S Bone substitute, Calcium Sodium 5-25mls
De Puy AustraliaDY353 Conduit TCP Bone matrix implant 10ccDY354 Conduit TCP Bone matrix implant 15ccDY355 Conduit TCP Bone matrix implant 30ccDY361 Conduit TCP Conduit Blocks Size 1. 15x15x20mm to 25x25x20mmDY362 Conduit TCP Conduit Cylinder H8-14 x D16-20mmDY363 Conduit TCP Conduit Wedge H6-18 x D15 x L15DY364 Conduit TCP Conduit 20ccDY427 Conduit TCP Bone matrix implant 5ccDY428 Conduit TCP Bone matrix implant 20cc
Device Technologies Australia Pty LtdDE194 Salu Cartilage Osteochondral implant 5mm - 25mm
Global Manufacturing Technology Pty LimitedGM036 Callos Bone Void Filler Calcium Phosphate 10ccGM037 Callos Bone Void filler Calcium Phosphate 5cc
PART A - Prostheses List by Category, Groups and Sponsor Page 182 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Orthopaedic TechnologyGO051 ApaPore ApaPore 60. Sterile, hydroxyapatite-based 10ml, 2-5 & 5-10mm
bone matrix
GO052 ApaPore ApaPore 60. Sterile, hydroxyapatite-based 20ml, 2-5 & 5-10ml bone matrix
GO053 ApaPore ApaPore 60. Sterile, hydroxyapatite-based 40ml, 2-5 & 5-10mm bone matrix
GO054 ApaPore ApaPore 60. Sterile, hydroxyapatite-based High Volume Grafting Kit. 2-5 & 5-10mm bone matrix
GO055 ApaPore ApaPore 60. Sterile, hydroxyapatite-based 4cc block bone matrix
GO056 ApaPore ApaPore 60. Sterile, hydroxyapatite-based 10cc block bone matrix
GO057 ApaPore ApaPore 70. Sterile, hydroxyapatite-based 10ml, 2-5mm bone matrix
GO058 ApaPore ApaPore 70. Sterile, hydroxyapatite-based 20ml. 2-5 & 5-10mm bone matrix
GO059 ApaPore ApaPore 70. Sterile, hydroxyapatite-based High Volume Grafting Kit. 2-5 & 5-10mm bone matrix
GO060 ApaPore ApaPore 70. Sterile, hydroxyapatite-based 4cc block bone matrix
GO061 ApaPore ApaPore 70. Sterile, hydroxyapatite-based 10cc block bone matrix
GO062 ApaPore ApaPore 80. Sterile, hydroxyapatite-based 10ml. 2-5mm bone matrix
GO063 ApaPore ApaPore 80. Sterile, hydroxyapatite-based 20ml. 2-5mm bone matrix
GO064 ApaPore ApaPore 80. Sterile, hydroxyapatite-based 4cc block bone matrix
GO065 ApaPore ApaPore 80. Sterile, hydroxyapatite-based 10cc block bone matrix
GO066 ApaPore Pore-Si. Sterile, hydroxyapatite-based 10ccbone matrix
GO067 ApaPore Pore-Si. Sterile, hydroxyapatite-based 20ccbone matrix
PART A - Prostheses List by Category, Groups and Sponsor Page 183 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GO068 ApaPore ApaPore 80. Sterile, hydroxyapatite-based High Volume Grafting Kit. 2-5 & 5-10mm bone matrix
Mathys AustraliaMA001 Chronos TCP Granules Porous Tricalcium Phosphate Granules 20gMA002 Chronos TCP Granules Porous Tricalcium Phosphate Granules 10gMA003 Chronos TCP Granules Porous Tricalcium Phosphate Granules 5gMA004 Chronos TCP Granules Porous Tricalcium Phosphate Granules 1gMA005 Chronos TCP Granules Porous Tricalcium Phosphate Granules 0.5gMA295 ChronOS TCP Wedge Small, Medium, LargeMA296 ChronOS TCP Blocks Small, Medium, LargeMA313 ChronOS TCP Cylinder Dia 8.5 - 14mm
Medtronic Sofamor Danek Australia Pty LtdSD233 Mastergraft Calcium Phosphate Ceramic Granules 5cc VialSD234 Mastergraft Calcium Phosphate Ceramic Granules 10cc VialSD235 Mastergraft Calcium Phosphate Ceramic Granules 15cc VialSD236 Mastergraft Calcium Phosphate Ceramic Granules 30cc VialSD300 Mastergraft Matrix 1ccSD302 Mastergraft Matrix 20ccSD303 Mastergraft Matrix 10cc
Stryker Australia Pty LtdSK236 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 2.5gm
Replacement. Sodium Phosphate Solution and Mixing bowl included
SK237 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 5gm packReplacement. Sodium Phosphate Solution and Mixing bowl included
SK238 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 10gm packReplacement. Sodium Phosphate Solution and Mixing bowl included
SK239 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 25gm packReplacement. Sodium Phosphate Solution and Mixing bowl included
PART A - Prostheses List by Category, Groups and Sponsor Page 184 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST020 Bonesave Calcium phosphate based granules 40gms, granule size 2-4mmST021 Bonesave Calcium phosphate based granules 40gms, granule size 4-6mmST049 Calcium Sulphate Pellets Vial of 200 3mmST050 Calcium Sulphate Pellets Vial of 400 3mmST053 Calcium Sulphate Pellets Vial of 100 5mm
Technology For Life Pty LtdTE016 Ceraform Cementek Bone Substitute Composite hyclroxy apitite 20-40 gram
Bone Matrix Implants, Biological
Stryker Australia Pty LtdST677 Bone Graft - Artificial Pyrost - 2.7cubic cmST678 Bone Graft - Artificial Pyrost - 6.5cubic cmST679 Bone Graft - Artificial Pyrost - 19.5cubic cmST865 OP-1 Implant - Osteogenic Protein 1, Osteoinductive and osteoconductive bone 1 vial
graft substitute
Caps, Bone
De Puy AustraliaDY098 Moss Miami (Titanium) Pin Nut One size only
Cement
ZimmerZI328 Coonrad/Morrey Elbow Cement PMMA/Plastic Extra Small, Small, Regular
PART A - Prostheses List by Category, Groups and Sponsor Page 185 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Cement Dispensers, Orthopedic
Howmedica IncorporatedHW003 Exeter Cement Security System Exeter Bone Pug - PMMA 6, 8, 10, 12, 14, 16, 18, 20mmHW006 Exeter Cement Security System X-Change Bone Plug - PMMA 10, 12, 14, 16, 18, 20mm
Orthotech Pty LtdOH171 Mendec Spine Bone Cement Cement Kit
Stryker Australia Pty LtdSK178 Simplex Enhancement System Simplex Express PrePack 2 dose Simplex P with ACMSK179 Simplex Enhancement System Simplex Express PrePack 2 dose Simplex P with MixevacSK180 Simplex Enhancement System Simplex Express PrePack 2 dose Simplex Antibiotic with ACMSK181 Simplex Enhancement System Simplex Express PrePack 2 dose Simplex Antibiotic with Mixevac
Cement, Orthopedic
Advanced Surgical TechnologiesAD104 Osteoset BVF Kit Kit contains calcium sulfate, diluent, 20cc and 30cc
mould, spatula and mixing bowl
AD208 OSTEOSET - BVT KIT (STANDARD Mini Bead Kit 5cc Standard/Fast CureCURE, FAST CURE)
Biomet Australia Pty LtdBI242 Palamed Bone Cement, PMMA 40gmBI243 Palamed G Bone Cement Bone Cement, Gentamicin, PMMA 40gmBI844 Palamed G Bone Cement Bone Cement, Methyl methacrylate, 40 gm (2 x 20 gm)
Gentamicin
BI845 Palamed G Bone Cement Bone Cement, Methyl methacrylate, 80 gm (2 x 40 gm)Gentamicin
BI846 Generation 4 Bone Cement Bone Cement, Methacrylate- Styrene 40gm packcopolymer
BI847 Generation 4 Bone Cement Bone Cement, Methacrylate- Styrene 80gm packcopolymer
PART A - Prostheses List by Category, Groups and Sponsor Page 186 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI879 Palamed Bone Cement Bone Cement, Methyl methacrylate, 20gm (1 x 20 gm)Gentamicin
Corin Australia Pty LtdCR055 Coriplast 1 Acrylic bone cement standard vicosity One size onlyCR056 Coriplast 3 Acrylic bone cement low vicosity One size only
De Puy AustraliaDP107 CMW Bone Cement CMW Bone Cement Various without 20, 40 grams
Antibiotic
DP108 CMW Antibiotic Bone Cement CMW Bone Cement Various with 20, 40 gramsDP919 CMW Endurance Gentamicin Cement CMW Endurance Gentamicin Cement 20, 40, 60, 80 gramsDY061 Calcium Phosphate Cement Bio Fill Cement One size onlyDY084 A-BSM Bone Cement 2.5gDY085 A-BSM Bone Cement 5.0gDY086 A-BSM Bone Cement 10.0gDY097 Vetebrplastic Cement One size only
Global Manufacturing Technology Pty LimitedGM009 C-ment1, C-ment 3, Genta C-ment , Acrylic Bone Cement 40 grams
Genta C-ment 3
GM018 C-ment 1, C-ment 3, Genta C-ment, Acrylic Bone Cement with Gentamicin 40 gramsGenta C-ment 3
Howmedica IncorporatedHW320 Antibiotic Simplex Bone Cement with Polymethyl Methacrylate, Styrene 40 grams
Tobramycin Copolymer, Barium Sulfate
HW321 Antibiotic Simplex Bone Cement Erythromycin and Colistin - Polymethyl 40 gramsMethacrylate, Styrene Copolymer, Barium Sulfate
HW322 Surgical Simplex P Radiopaque Bone Polymethyl Methacrylate, Styrene 40 gramsCopolymer, Barium Sulfate
LMT Surgical Pty LtdLM046 Kassios Bone Cement Kasios bone cement is a calcium 5cc - 10cc $0.00
phosphate bone cement
PART A - Prostheses List by Category, Groups and Sponsor Page 187 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mathys AustraliaMA431 Cemfix Acrylic bone cement for orthopaedic CEMFIX 1 Standard viscosity; CEMFIX
2 Low viscosity
MA446 Norian SRS Reactant Pack Cement Reactant Pack 5ccMA447 Norian SRS Reactant Pack Cement Reactant Pack 10cc
Orthotech Pty LtdOH126 Cemex bone cement 1 mix 1 mix 40g powder and 13.3g liquid
Methylmethacrylate/Polymethylmethacryl
OH127 Cemex-genta bone cement 1 mix Methylmethacrylate/ 1 mix 40g powder and 13.3g liquidPolymethylmethacrylate with gentamiacin
OH166 Mendec Spine Bone Cement Cement
Smith & Nephew Surgical Pty LtdSN664 Versabond Bone Cement Methy Methacrylate Methyl Acrylate 60g
Copolymer, Methylmethacrylate Homopolymer, Supplied as pack of powder (copolymer) and 28.2ml liquid (monomer) in an ampule
SN667 Versabond Bone Cement Methyl Methacrylate Methyl Acrylate 40gCopolymer, Methylmethacrylate Homopolymer, Supplied as Powder (copolymer) and liquid (monomer) in an ampule
Stryker Australia Pty LtdSK184 VITOSS - Synthetic cancellous bone void Beta-tricalcium phosphate 1.2cc dowel
filler
SK185 VITOSS - Synthetic cancellous bone void Beta-tricalcium phosphate 15cc morsels filler
SK186 VITOSS - Synthetic cancellous bone void Beta-tricalcium phosphate 20cc dowel filler
SK187 VITOSS - Synthetic cancellous bone void Beta-tricalcium phosphate 30cc morsels and 30cc dowels filler
SK188 VITOSS - Synthetic cancellous bone void Beta-tricalcium phosphate 10cc morsels and 10cc dowels filler
SK190 CORTOSS - Synthetic cortical bone void - 20cc CORTOSS kitSK191 VITOSS - Synthetic Cancellous bone Beta-tricalcium phosphate 5cc morsels
void filler
PART A - Prostheses List by Category, Groups and Sponsor Page 188 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST800 2.5gm Bone Source Hydroxyapatite Self setting cement used to fill cranial 2.5gmCement with Sodium Phosphate defects, sodium phosphate included in
packaging to allow acceleration of the
William A Cook Aust Pty LtdWC145 Osteo-Firm Osteo Bone cement - Osteo Firm One size only
ZimmerZI187 Zimmer Bone Cement Systems Regular 40/20 - PMMA Double MixZI226 Zimmer Bone Plug Allen Medullary Plug 8 - 23mmZI232 Palacos "R" bone cement Double mix PMMA 80g x 40ml
Cerclage, Orthopedic Fixation
Smith & Nephew Surgical Pty LtdSN460 Wire Cerclage 0.6mmx175mm - 0.8mmx200mm To be funded where
any or all K-wires used in a procedure are used as an implant.
Clips, Ligating
Smith & Nephew Surgical Pty LtdSN479 Compression Hip Screw System Hip Screw Clip (ambi only) One size only
Device Kits With Drugs
De Puy AustraliaDP445 Vacu Mix Plus CMW Cement Vacu-Mix Plus Pre Loaded With CMW 50, 80 grams
Bone Cement with Antibiotic
DY199 Cemvac Ultra Prepacked with CMW Cemvac Cement Various Without 60, 100 gramsDY200 Cemvac Ultra Prepacked with CMW Cemvac Cement Various With Antibiotic 60, 100 grams
PART A - Prostheses List by Category, Groups and Sponsor Page 189 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Drivers
Linvatec AustraliaLV028 Pre-loaded BioStinger Bio-Absorbable Violet, PLLA 10, 13, 16mm
Meniscal Repair Implant
Electromanometers
De Puy AustraliaDP447 Biosel 2 BIOSEL II Dose 5G (Calcium Phosphates) 5g
Fixation Device
Advanced Surgical TechnologiesAD257 OSSStaple Osteosynthesis Staple Dynamic Compression Implants OSS Large - Sizes 20x20x20, 25x22x22,
Staple - Biocompatible Nitonol
AD258 OSSStaple Osteosynthesis Staple Dynamic Compression Implants OSS Small - Sizes 5x7x5, 7x9x7, 8x11x8, Staple - Biocompatible Nitonol 10x11x10, 10x13x10, 12x15x12
AD259 OSSStaple Osteosynthesis Staple Dynamic Compression Implants OSS Asymmetric - 11x15x13, 11x17x15, Staple - Asymmetric Staples - 11x17x19, 18 x 18 x 18Biocompatible Nitonol Construction
AD260 OSSStaple Osteosynthesis Staple Dynamic Compression Implants OSS Plate Staple - 15x6, 15x8, 15x10Plate Staple - Biocompatible Nitonol
Corin Australia Pty LtdCR070 Alpha Lock Titanium Counter Sunk Titanium Counter Sunk Screw Length (mm) 15, 20, 25, 30, 35, 40, 45,
50, 55, 60, 65 & 70
CR071 Alpha Lock, Locking Screw Locking Screw, Titanium One Size Only
De Puy AustraliaDY332 Summit Cervical Rod System Occipital Plates "Y" or "T" 31-45mmDY333 Summit Cervical Rod System Occipital Bone Screw 4.5 - 5.25 Dia x 6 -16mm lengthDY334 Summit Cervical Rod System Transition Rod 3.0/4.0/3.0mm
PART A - Prostheses List by Category, Groups and Sponsor Page 190 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY335 Summit Cervical Rod System Dual Diameter Rod 3x150mm/4.75 - 5.5mm x 270mmDY336 Summit Cervical Rod System Cross Connector One size onlyDY337 Summit Cervical Rod System Open Cable Connector One size onlyDY338 Summit Cervical Rod System Cancellous Bone Screw 3.5-4.5mm x 12-48mmDY339 Summit Cervical Rod System Mini Polyaxial Screw Standard or High 3.5mm x 12-50mmDY340 Summit Cervical Rod System Mini Polyaxial Outer Nut One size onlyDY341 Summit Cervical Rod System Pin Nut with Flange or No Flange One size onlyDY342 Summit Cervical Rod System Connectors Left or Right or Neutral One size onlyDY343 Summit Cervical Rod System Rod 3mm x 70-200mmDY344 Summit Cervical Rod System Transverse Connector Hook One size onlyDY345 Summit Cervical Rod System Transverse Connector Screw One size onlyDY346 RECO Spinal System Pedicale Screw 4-7mmDY347 RECO Spinal System Block 4-7mmDY348 RECO Spinal System Rod 4 or 6mm dia x 70-130mmDY349 RECO Spinal System Rod 4 or 6mm dia x 480mm LengthDY350 RECO Spinal System Set Screw One size onlyDY351 RECO Spinal System Tranverse Connector 4 or 6mmDY380 Versa Nail TTC Fusion Nail Sterile 10mm x 15cm up to 12mm x 25cmDY381 Versa Nail TTC Fusion Nail Unsterile 10mm x 15cm up to 12mm x 30cmDY382 Versa Nail TTC Nail Cap Unsterile Impinging and One Size
Non Impinging
DY383 Versa Nail TTC Nail Cap Sterile Impinging and Non One SizeImpinging
DY386 Hoffman Wrist Kit Hoffman Sterile Wrist Kit One size only
Global Manufacturing Technology Pty LimitedGM020 Optimal Spinal System Hooks-open & closed-pedical & laminar VariousGM025 Maxima/Optima Anterior Cervical Plate Cancellous Bone Screws 3.5 x 10mm to 20mm; 4.0 x 10mm to
System
GM026 Maxima/Optima Anterior Cervical Plate Anterior cervical Plates 24mm to 108mmSystem
PART A - Prostheses List by Category, Groups and Sponsor Page 191 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GM027 NeoIC (Neo Interbody Fusion Cage) Interbody Fusion Cage VariousGM029 Optimal Spinal System Axial/Lateral Connectors VariousGM031 Optimal Spinal System Traverse Link Assembly 40 to 80mmGM032 Optimal Spinal System Set Screw 9 x 1.5 to 10 x 1.5mmGM033 Optimal Spinal System Rod 6 x 40 to 6 x 600mmGM034 Optimal Spinal System Pedicle Screw Monoaxial Type 4 x 25 to 8 x 55mmGM035 Optimal Spinal System Pedicle Screw-Poly Type 5 x 30 to 8 x 55mmGM039 Prima OCT Spinal System Occiput Plate One size only
Linvatec AustraliaLV078 UltraFix Knotless Minimite Suture Anchor Titanium Diameter 2.3mmLV089 Duet Suture Anchor Self-Reinforced 96L/4D PLA Copolymer 6.0mm O.D. x 16.5mm L
LMT Surgical Pty LtdLM041 Trimed Bearing Plate, Fixation Pegs The fixation pegs are made of medical Pegs - 2.3 x 10-34mm Threaded or
grade 316 stainless steel unthreaded pegs
Mathys AustraliaMA435 Spine Cable System Single Lead One size onlyMA436 Spine Cable System Single Lead MultipackMA437 Spine Cable System Double Lead MultipackMA438 Spine Cable System Double Lead One size only
Medtel Australia Pty LtdME113 OctaFix Occipital Cervical Plating System Closed Screw 4mmME114 OctaFix Occipital Cervical Plating System Screw Offset ConnectorME115 OctaFix Occipital Cervical Plating System Primary Bone Screw 3.5mmME116 OctaFix Occipital Cervical Plating System Bone Screw 3.5 - 4.0mmME123 Nex-Link Spinal Fixation System, Open Screw 4.00mmME125 Nex-Link Spinal Fixation System, Closed Screw Set 4.0mm
Screw
ME126 Nex-Link Spinal Fixation System, Polyaxial Screws 3.5mmx10mm - 4.00mmx22mmME127 Nex-Link Spinal Fixation System, Transverse 4.00mm Rod x 25mm - 45 length
Connectors
PART A - Prostheses List by Category, Groups and Sponsor Page 192 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME128 Nex-Link Spinal Fixation System, Cervical Hooks 5 & 7mmME130 Incompass Thoracolumbar Fixation System, Open 5.5mm
Implant Closure Top
ME131 Incompass Thoracolumbar Fixation System, Closed 5.5mmImplant Set Screw
ME132 Incompass Thoracolumbar Fixation System, Offset 9.5 - 30mmConnector Open
ME141 Incompass Thoracolumbar Fixation System, Offset 7.5 - 30mmConnector Closed
ME142 Incompass Thoracolumbar Fixation System, 5.5 - 7.5Polyaxial Screw Open
ME143 Incompass Thoracolumbar Fixation System, Fixed 4.5 - 8.5mmAngle Screw Open
ME144 Incompass Thoracolumbar Fixation System, Fixed 4.5 - 8.5mmAngle Screw Closed
ME145 Incompass Thoracolumbar Fixation System, Hooks 5.5mmME173 Pathfinder Minimally invasive pedicle fixation system Cannulated Polyaxial Screws 6.5 - 7.5mmME174 Pathfinder Minimally invasive pedicle fixation system Open Implant Closure Top 5.5mmME175 OctaFix Occipital Cervical Plating System Occipital Plate
Medtronic Sofamor Danek Australia Pty LtdSD293 Xantus Xantus cover Plate and Set Screw 40mm - 100mm Length in 4mm SD298 Engage Bolt 5.5 to 8.5mm diameterSD306 CD Horizon Legacy lliac Screw 6.5mm to 8.5mm DiameterSD307 SiLo Set Screw One Size onlySD308 CD Horizon Legacy lliac Lateral Connector 20mm and 30mm Length
Orthotech Pty LtdOH164 Behac Humeral Nail Stainless Steel Elastic Nail Large loop and Small LoopOH165 Telegraph Nail Stainless Steel Antegrade Nail 15cm length, 7-9mm DiameterOH173 Telegraph Screws Self Stabilizing Screws 24mm - 45mmOH203 Altius Occipito-Cervico-Thoracic (OCT) Rod 8 to 24cm x 3.5mm Occipital and
System Curved Rod
PART A - Prostheses List by Category, Groups and Sponsor Page 193 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
OH204 Altius Occipito-Cervico-Thoracic (OCT) Locking and CAP Nuts one size onlySystem
OH205 Altius Occipito-Cervico-Thoracic (OCT) Domino Adjustable CC Left & Right One size onlySystem
OH206 Altius Occipito-Cervico-Thoracic (OCT) Connector 15, 30, 45 L&RSystem
OH207 Altius Occipito-Cervico-Thoracic (OCT) Screws 8mm to 32mmSystem
OH208 Altius Occipito-Cervico-Thoracic (OCT) Hook and OC Screws Hook: 12mm to 14mm (L&R), OC System Screws: 6mm to 20mm
OH209 Altius Occipito-Cervico-Thoracic (OCT) TI Occipital Plate 35-45mm, 40-50mm, 45-55mmSystem
Stryker Australia Pty LtdSK222 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V Hook, Standard Short; Hook, Standard
Tall; Hook, Offset, Right; Hook Offset,
SK223 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V Cortical Plate screw Size 3.5mm (Length 6mm-24mm in 2mm increments); Cortical Plate screw Size 4.0mm (Length 6mm-24mm in 2mm increments); Cortical Plate screw Size 4.0mm (Length 30mm-54mm in 4mm increments)
SK224 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V 3.5mm Rod (Length 80mm); 3.5mm Rod (Length 120mm); 3.5mm Rod (Length 240mm)
SK225 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V Cortical Polyaxial screw Size 3.5mm Length 10mm-24mm (in 2mm increments); Cortical Polyaxial screw Size 4.0mm Length 10mm-26mm (in 2mm increments); Cortical Polyaxial screw Size 4.0mm Length 26mm-46mm
SK226 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V Occiput Plate; One level Plate; Two level Plate; Multi level Plate
SK227 Oasys-Occipito Cervico Thoracic System Ti-6A1-4V Transverse Connector; Offset Connector; Rod to Rod Connector
SK228 Omega Plus Compression Hip Screw Cephalic Implants Hansson Twin Hook 50-140mmSK229 Omega Plus Compression Hip Screw Cephalic Implants Hansson Twin Hook Compression Screw
25mm
PART A - Prostheses List by Category, Groups and Sponsor Page 194 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK230 Omega Plus Compression Hip Screw Cephalic Implants Hansson Pin 70-140mmSK241 Xia Spinal System Titanium or Stainless Steel Cross 15-20mmSK242 Xia Spinal System Titanium or Stainless Steel Single Hole Staple; Dual Hole Staples
(Caudal/Rostral) - Small, Medium, Large
SK243 Gamma LN Lag Screw - Titanium 10.5mmx70mm - 10.5mmx130mmSK244 Gamma LN Long - Titanium 120, 124, 130 Deg; Diameter 10-12mm;
Length 280-420mm
SK245 Gamma LN Locking Screw - Titanium 5x25mm - 5x95mmSK246 Gamma LN Standard - Titanium 120, 125, 130 Deg; Diameter 10-12mm;
Length 170-200mm
SK247 Gamma LN Set Screw - Titanium 8x17.5mmSK248 Gamma LN Proximal/Extension Plug - Titanium 0mm, +5mm, +10mmSK249 Maps Spinal Fixation System Titanium - Long Post Screw Diameter - 6.50mm, 7.50mm (Length 40-
50mm)
SK250 Maps Spinal Fixation System Titanium - Offset Connector, Two Step Offset Connector - Small, Medium, LargeLocking Connector, Variable Offset Connector
SK251 Maps Spinal Fixation System Titanium - Standard Screw Diam 4.75mm Length 25-50mm, Diam 5.75mm Length 25-55mm, Diam 6.75 Length 25-60mm, Diam 7.75mm Length 25-60mm, Diam 8.75 Length 30-55mm
SK252 Spiral Radius 90D Titanium Locking Cap One Size OnlySK253 Spiral Radius 90D Titanium Variable Cross Connector - Long,
Medium Short; Fixed Cross Connector -
SK254 Spiral Radius 90D Titanium - Hook: Oblique, Lamina, Oblique - Left & Right; Lamina - Large, Thoracic, Pedicle, Offset Extended Medium, Medium, Wide
Medium, Extended Small, Small, Wide Small; Pedicle - Large & Small; Offset -
SK304 Gamma LN Anti-rotation screw for Lag Screw - +1, +3, +5mmSK306 Maps Spinal Fixation System Union Rod Titanium 40-500mmSK307 Spiral Radius 90D Rod to Rod Connector - Titanium One size onlySK308 Spiral Radius 90D Anterior Clamp - Titanium One size onlySK309 Spiral Radius 90D Locking Screw - Titanium Diameter 6.75mm Length 30-50mm
PART A - Prostheses List by Category, Groups and Sponsor Page 195 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK310 Spiral Radius 90D Screw Offset, Clip Offset - Titanium Long & ShortSK311 Spiral Radius 90D Non Hex Rods; Spinal Rod with Hex; Diameter 5.5mm Length 40-120mm;
Spinal Rod with Sacral Eye - Titanium Diameter 5.5mm Length 50-600mm; Diameter 5.5mm Length 200-400mm
SK312 Spiral Radius 90D Standard Screw - Titanium Diameter 4.75mm Length 25-50mm, Diameter 5.75mm Length 25-55mm, Diameter 6.75mm Length 25-60mm, Diameter 7.75mm Length 25-60mm, Diameter 8.75mm Length 30-55mm
SK313 Spiral Radius 90D Multi Angle Screw - Titanium Diameter 4.75mm Length 25-50mm, Diameter 5.75mm Length 25-55mm, Diameter 6.75mm Length 25-60mm, Diameter 7.75mm Length 25-60mm
SK366 Universal Distal Radius System Universal SMARTLook Locking Plates Standard, Narrow and Wide in Long and short options
SK369 Universal Distal Radius System Leibinger Self-Tapping, Cross-Pin, 2.0mmx16mm to 2.0mmx26mm; Titanium Locking Screws/Pegs 2.3mmx10mm to 2.3mmx38mm in 2mm
increments; 2.7mmx10mm to 2.7mmx26mm in 2mm increments
SK371 Matrix SMARTLock Polyaxial Locking Leibinger Locking Screws 2.7mmx10mm to 2.7mmx28mm in 2mm System for the Distal Radius increments
Taylor Bryant Pty LtdTB248 Avanta - SCS Distal Radius Plate System Left and Right, Tined Small, LargeTB250 Avanta - Diamond Plate Carpal Fusion Plate One Size OnlyTB267 Blackstone - Fixed System Washer Titanium One Size OnlyTB268 Blackstone - Washer Titanium 2/4/6mmTB269 Blackstone - Spacer Titanium 3/5mmTB270 Blackstone - Posterior Hook Titanium Large/Angled/Offset/Left/Right/Narrow/
Wide/ThoracicLaminar/Lumbar Laminar
TB271 Blackstone - Staple Titanium 2/4/6mmTB272 Blackstone - Posterior Cervical System Crimp Two Pack - Titanium One size onlyTB273 Blackstone - Posterior Cervical System Double Loop Cable w/Four Crimps - One size only
Titanium
TB274 Blackstone - Posterior Cervical System Single Loop Cable w/Two Crimps - One size onlyTB275 Blackstone - Posterior Cervical System Occipital Screw 6, 8, 10, 12, 14mm
PART A - Prostheses List by Category, Groups and Sponsor Page 196 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB276 Blackstone - Posterior Cervical System Occipital Anchor 31, 37, 45, 50mmTB277 Blackstone - Posterior Cervical System Occipital Rod One size onlyTB278 Blackstone - Posterior Cervical System Cross-Connector 20, 25, 30, 35, 40, 45, 50mmTB279 Blackstone - Posterior Cervical System Rods - Titanium 3.0mmx70, 120, 200mmTB280 Blackstone - Posterior Cervical System Mini-Multi-Axial Screw 3.5-4mmx10-30mm (2mm increments)TB281 Blackstone - Posterior Cervical System Set Screw One size onlyTB282 Blackstone - End Ring Surgical Mesh [Surgical mesh X Angle] 10-16mm (2mm
increments) X 0-2.5 degrees
TB283 Blackstone - Standard Ring Screw Titanium One size onlyTB284 Blackstone - Surgical Mesh 6 lobe 12 x 15mm, 8mm - 17 x 22, 15mmTB285 Blackstone - Surgical Mesh 4 lobe [Diameter x height] 10-16 X 10-16mm
(2mm increments), 7-70mm
TB297 Easy Spine Implants Thoracic and lumbar spine posterior Rod: 35mm - 500mm, Screw: 5x30mm - osteosynthesis system - Rod, Screw, 7x55mmTransverse Connexion
TB302 Blackstone - Surgical Mesh 6 lobe 17 x 22mm, 70mm - 26 x 33mm, 90mm
TiMax Surgical Pty LtdTI089 Merries PROT TpBA Titanium, SB &SL 7/9mm to 10/13mm
ZimmerZI332 Dynesys Spacer Composition : Polycarbonate 45mm longZI333 Dynesys Pedicle Screw Composition : Titanium alloy 35 to 50mm lengthsZI334 Dynesys Cord Composition: Sulene 100 or 200 mm longZI471 NCB-Femur Plate System Complete Complete with all locking screws, gap Plate size 167 to 324 mm long
insert, spacers. Special Titanium alloy.
Fixation Device, Internal, Plate
B Braun Australia Pty LtdBB248 PACH Plate Titanium 28 & 32mm
Device Technologies Australia Pty LtdDE236 Carpal Button Titanium X3 sizes with various screw hole options
PART A - Prostheses List by Category, Groups and Sponsor Page 197 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LMT Surgical Pty LtdLM033 Trimed Wrist Fixation System, Volar Peg Stainless Steel Volar Peg Plate 3-hole, Right & Left, 4
Plate and 5 Peg; Volar Peg Plate 5-hole, Right & Left, 4 and 5 Peg
LM034 Trimed Bullet Stainless Steel 3 - 9 HolesLM037 Trimed Bearing Plate The Bearing Plate is a stainless Steel plate 3 - 9 holes
that has stainless Steel pegs and Screws for Fixation
LM038 KMI Distal Volar Radius Plate (DVR) The DVR plates are made of titanium DVR Plate, 4 or 5 Holewith the option of 4 hole and 5 hole plates, 2.1mm pegs, 2.4 or 2.8mm Screws and 3.5mm proximal screws
LM039 KMI Distal Volar Radius Plate (DVR) The DVR plates are made of titanium DVR Pegs, 2.1mm x 10-34mmwith the option of 4 hole and 5 hole plates, 2.1mm pegs, 2.4 or 2.8mm Screws and 3.5mm proximal screws
Medical & Optical Instruments Australia Pty LtdMO243 Polarus Proximal Humeral Plate Titanium Humeral Plate Left, Right, Large, Small, Two PartMO247 Martin Fixation Device Internal - Plate Steile Titanium Y and Double Y Plate 1.5mm system Only to be funded
where used in a service for which a Medicare Benefit is payable
Medtronic Sofamor Danek Australia Pty LtdSD295 Xantus Xantus Plate 40mm -100mm length in 4mm SD297 Pyramid Pyramid Cover Plate and Set Screw 17mm - 35mm length in 2 mm SD301 Pyramid Pyramid Plate 17mm - 35mm
Pacific MedicalPM111 Gotfried PC.C.P. Internal Hip Compression Plate One size only
Surgical HouseSU177 Surfix Reinforced Bendable Composition - 316L Stainless Steel. To 2 holes, 4 holes/77mm, 4 holes/112mm
Osteosynthesis Plates be used only with Surfix Screws/lock
SU178 Surfix Bendable Osteosynthesis Plates Composition - 316L Stainless Steel. To 2-4 hole platesbe used only with surfix screws/lock
SU179 Surfix Bendable Osteosynthesis Plates Composition - 316L Stainless Steel. To 5 - 7 hole platesbe used only with Surfix screws/lock
PART A - Prostheses List by Category, Groups and Sponsor Page 198 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SU180 Surfix Distal Humeral Plates Composition - 316L Stainless Steel. To Left and rightbe used only with Surfix screws/lock
SU181 Surfix Femoral Osteosynthesis Plates Composition - 316L Stainless Steel. To 8/9/10 hole, left and rightbe used only with Surfix screws/lock
SU182 Surfix Distal Femoral Varus Osteotomy Composition - 316L Stainless Steel. To be One size only used only with surfix screws/lock screws
SU183 Surfix Femoral Varus and De-rotation Composition - 316L Stainless Steel. To Surfix Femoral Varus and De-rotation Osteotomy Plates be used only with Surfix screws/lock Osteotomy Plates - 3 holes, Surfix
Femoral Varus and De-rotation Osteotomy Plates - 4 holes, Surfix Reinforced Femoral Varus and De-
SU184 Surfix Proximal Humeral Plate Composition - 316L Stainless Steel. To be One size only used only with Surfix screws/lock screws
SU185 Surfix HTO Plates Composition - 316L Stainless Steel. To be Opening wedge HTO plates, left and used only with Surfix screws/lock right. Closing wedge HTO plates, left and
right. Reinforced closing wedge HTO plates, left and right
SU193 Basal Osteotomy Plate Titanium 5 Deg, Left and Right, 10Deg, Left and SU194 Calcanea, Calcaneal Fracture Plate Titanium Small, Medium, Large
Fixation Device, Internal, Screw
De Puy AustraliaDY401 Monarch Monoaxial Pedicle Screw 4.75mm - 8.5mm x 25 to 80mm length
Device Technologies Australia Pty LtdDE214 Cortical Screw Titanium 10-24mm x 2.3mmDE230 Scaminos Screws Titanium 13-31mm lengthDE238 Carpal Screw Titanium 2.5mm diameter in sizes 12mm-20mmDE247 Minos Screws Titanium 2-3mm diameter x 9-21mm lengthDE249 Weil Screws Titanium 7-17mm
LMT Surgical Pty LtdLM029 Kompressor Titanium compression screw 10-34mm
PART A - Prostheses List by Category, Groups and Sponsor Page 199 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LM032 Trimed Wrist Fixation System, Volar Threaded and non-threaded, stainless threaded 10 - 28mm (2mm increments), Non-threaded 10 - 28mm (2mm
LM040 KMI Distal Volar Radius Plate (DVR) The DVR plates are made of titanium DVR Screws, 2.4 - 3.5mm x 10 - 34mmwith the option of 4 hole and 5 hole plates, 2.1mm pegs, 2.4 or 2.8mm Screws and 3.5mm proximal screws
Medtronic Sofamor Danek Australia Pty LtdSD294 Engage Breakoff Set Screw one size onlySD296 Pyramid Pyramid Bone Screws 6.5mm Diameter, 20 -60mm length in
5mm increments
SD299 Silo Screw 4.5 to 8.5mm diameterSD304 Xantus Xantus Bone Screws 6.5mm Diameter, 20 - 60mm length in
5mm increments
SD305 Engage Connector Small, Medium, Large
Orthotech Pty LtdOH167 Forefoot Snap off Screws Titanium Alloy Screws with Snap-off Auto Compressive long L10 - L34OH168 Forefoot Snap off Screws Titanium Alloy Screws with Snap-off FSA 2 part 9-21/14-26OH169 Forefoot Snap off Screws Titanium Alloy Screws with Snap-off Weil self tapping L9 - L15OH170 Forefoot Snap off Screws Titanium Alloy Screws with Snap-off Arthrodesis large diameter L28 - L40
Pacific MedicalPM112 Neck, Shaft & Locking Screws Telescopic, Self-Tapping, Primary, Neck L90 - 140mm; Primary Locking
L20 - 75mm
PM113 Neck, Shaft & Locking Screws Telescopic, Self-Tapping, Primary, Shaft L31-43mm:PM114 Neck, Shaft & Locking Screws Telescopic, Self-Tapping, Primary, Revision Locking L20-75mm
Plus OrthopaedicsPL003 Interference Screws, Cannulated, Interference Screws, cannulated, titanium Diameter 2-9mm, Length 10-45mm
titanium alloy, TioFin coated alloy, TioFin coated, custom
Smith & Nephew Surgical Pty LtdSN758 IMHS CP IMHS lag screw 55mm to 150mmSN759 Asian IMHS Intramedullary and subtrochanteric hip Large Screw: 11mm major diameter;
screws. Small and made out of titanium 5.6mm minor diameter; lengths 60-
SN760 Asian IMHS Intramedullary and subtrochanteric hip Subtrochantetic Lag Screw 11mm screws. Small and made out of titanium diameter, lengths 60-110cm
PART A - Prostheses List by Category, Groups and Sponsor Page 200 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN761 IMHS CP Subtrochanteric lag screw 12.7mm x 70mm to 12.7mm x 140mmSN762 IMHS CP Captured locking screw 4.5mm x 22mm to 4.5mm x 64mm
Surgical HouseSU186 Surfix Lock Screws For use with Surfix bone screws and One size onlySU187 Surfix Screws/Lock Screws Screws - Cancellous, Cancellous Cancellous/Cancellous cannulated -
cannulated, cortical, cortical cannulated Diameter 6.5mm, Length 20mm - 100mm + Lock Screw, Cortical - Diameter 5.0mm, Length 25mm - 45mm + Lock Screw, Cortical - Diameter 4.5mm, Length 14mm - 65mm + Lock Screw, Cortical - Diameter 3.5mm, Length
SU196 Calcanea Variable Angle Screw Cortical Screw, Titanium Diameter 3.5mm, Length 20mm to 45mm
TiMax Surgical Pty LtdTI070 TiMax Bone Screws Ultimax Titanium Bone Screws - Sterile Sizes 1.0-2.3 x 2-22mm, 4 packTI071 TiMax Bone Screws Ultimax Titanium Bone Screws - Sterile Sizes 1.0-2.3 x 2-22mm, 5 pack
Fixation device, internal, spine, construct
Global Manufacturing Technology Pty LimitedGM041 X Stop Interspinous Process Distraction Spacer assembly and Wing assembly, Size - 6mm, 8mm, 10mm, 12mm & 14mm $0.00 $0.00 Temporary Approval,
System pending review of product group
Fixation Device, Internal, Wire
De Puy AustraliaDP363 Control Cable Control Cable sleeve One size onlyDP364 Control Cable with Sleeve Control Cable with sleeve One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 201 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Gel, Resorbable, Antiadhesion
Advanced Surgical TechnologiesAD065 Adcon Anti-Adhesion Barrier Gel Adcon L 5 gram Temporary Approval -
Funded when clinical indications for use are present.
AD066 Adcon Anti-Adhesion Barrier Gel Adcon L 3 gram Temporary Approval - Funded when clinical indications for use are present.
AD067 Adcon Gel for Tendons Adcon TN 3 gram Temporary Approval - Funded when clinical indications for use are present.
Grafts, Bone
Orthotech Pty LtdOH003 Pro-Osteon Implants 500 Granules 10mm x 10mm x 10mm (1cc) BlockOH004 Pro-Osteon Implants 500 Granules 10mm x 10mm x 40mm (4cc) BlockOH005 Pro-Osteon Implants 500 Granules 10 x 20 x 50mm (10cc) BlockOH008 Pro-Osteon Implants 500 Granules 10ccOH010 Pro-Osteon Implants 500 Granules 20ccOH014 Pro-Osteon Implants 200 Block 20 x 15 x 10mm BlockOH016 Pro-Osteon Implants 200 Block 0.8cc x 5 Syringes GrannulesOH055 Pro Osteon Implants 200 Granules, Porous Hydroxyapatite Bone 5cc Syringe
Void Filler
Stryker Australia Pty LtdSK219 Stryker Plating System Periarticular Plates Femoral Plate 4.5/6.5mmSK220 Stryker Plating System Periarticular Plates Tibial Plate 4.5/6.5mmSK221 Stryker Plating System Periarticular Plates Tibial Plate 3.5/4.0mm
PART A - Prostheses List by Category, Groups and Sponsor Page 202 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Surgical HouseSU176 MBCP Wedge Composition - 60% hydroxyapatite / 40% MBCP Wedge - 6 degrees to 14 degrees
Ca3(PO4)2 To be used in combination with Surfix Opening Wedge HTO Plates and screws/lock screws
ZimmerZI265 Continuum hip system Hedrocel AVN Rod 3mm - 12mm blockZI270 Hedrocel block Hedrocel tantulum 2 x 4 x 4mmZI272 Hedrocel cylinder Hedrocel tantulum 10mm longZI273 Hedrocel half tube Hedrocel tantulum 10mm longZI274 Hedrocel Bone Grafts Trabecular Metal (Porous Tantalum) 3.2 - 5.7mm diameter; 36 - 48mm long
Grafts, Bone, Synthetic
De Puy AustraliaDP509 Brantigan I/F Cage AETI (Endoscopic) C/F Cage Wedge 7-13mm x 9-15mm x 21-25 mmDP510 Brantigan I/F Cage PLIF C/F Cage Straight / WedgeDP511 Brantigan I/F Cage ALIF C/F Cage Small - Large 9-15mmDP513 Brantigan I/F Cage Stackable Cage Small-LargeDP514 Brantigan I/F Cage Cervical Brantigan Cage Standard/Large 4-10mm
Device Technologies Australia Pty LtdDE082 Hatric Bone Substitute Ceramic 7mm - 15mmDE130 MBCP Micro & Macroporous Biphasic Calcium 0.5-1mm (1cc)
Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE131 MBCP Micro & Macroporous Biphasic Calcium 0.5-1mm (2cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
PART A - Prostheses List by Category, Groups and Sponsor Page 203 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE132 MBCP Micro & Macroporous Biphasic Calcium 1-2mm (2cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE133 MBCP Micro & Macroporous Biphasic Calcium 1-2mm (10cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE134 MBCP Micro & Macroporous Biphasic Calcium 2-3mm (2cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE135 MBCP Micro & Macroporous Biphasic Calcium 2-3mm (10cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE136 MBCP Micro & Macroporous Biphasic Calcium 2-3mm (16cc)Phosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, granules
DE137 MBCP Micro & Macroporous Biphasic Calcium 5 x 5 x 10-20mmPhosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium
DE138 MBCP Micro & Macroporous Biphasic Calcium 5-12mmPhosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, wedges,
DE139 MBCP Micro & Macroporous Biphasic Calcium 6-12mmPhosphate, composition - ceramic consituting calcium phosphate hydroxyapatic 60% and tricalcium phosphate beta (TCP) 40%, wedges,
PART A - Prostheses List by Category, Groups and Sponsor Page 204 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mathys AustraliaMA117 Chronos TCP Chronos B-TCP granules sterile 0.5G - 20G, granule size
Orthotech Pty LtdOH019 Bone Plast Bone Void Filler Powder 20cc
Smith & Nephew Surgical Pty LtdSN672 JAX Advanced Bone Void Filler Two components, granules composed of 10cc
calcium sulphate, stearic acid & magnesium sulphate & an aqueous gel of carboxymethylcellulose, sterile water & glycerol
SN674 JAX Advanced Bone Void Filler Two components, granules composed of 4cccalcium sulphate, stearic acid & magnesium sulphate & an aqueous gel of carboxymethylcellulose, sterile water & glycerol
Guides, Gigli Saw
Smith & Nephew Surgical Pty LtdSN451 Wire Kirschner, Trocar & Bayonet Point 1.3mmx140mm To be funded where
any or all K-wires used in a procedure are used as an implant.
SN452 Wire Kirschner, Sterile 0.6-2.0mm Diameter, 70 & 150mm Length To be funded where any or all K-wires used in a procedure are used as an implant.
SN453 Wire Kirschner, Diamond Point (2 point& 228.6mm Length 0.85-1.5mm To be funded where Single), Non Sterile any or all K-wires used
in a procedure are used as an implant.
SN454 Wire Kirschner, Diamond Point (2 point& 304.8mm Length 0.85-1.5mm To be funded where Single), Non Sterile any or all K-wires used
in a procedure are used as an implant.
PART A - Prostheses List by Category, Groups and Sponsor Page 205 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN455 Wire Kirschner, Diamond Point (2 point), Non 127mm Length 0.85-1.5mm To be funded where Sterile any or all K-wires used
in a procedure are used as an implant.
SN456 Wire Kirschner, Diamond Point (2 point), Non 177.8mm Length 0.85-1.5mm To be funded where Sterile any or all K-wires used
in a procedure are used as an implant.
SN457 Wire Kirschner, Trocar Points (2 Point & 101.6mm Length 0.76-1.5mm Diameter To be funded where single), Sterile any or all K-wires used
in a procedure are used as an implant.
SN458 Wire Kirschner, Threaded Diamond Point (2 228.6mm Length 0.85-1.5mm To be funded where point& Single), Non Sterile any or all K-wires used
in a procedure are used as an implant.
Hip - Acetabular ComponentsGroup 18a - Cups, cemented, hooded and unhooded, unmodified polyethylene
Advanced Surgical TechnologiesAD125 WMT Acetabular Cups All Poly UHMWPE 42 - 68mm in 2mm increments
B Braun Australia Pty LtdBB236 Polyethylene Acetabular Cup Chirulen 22.2mm-32mm articulations; 40mm-
64mm diameters
Corin Australia Pty LtdCR042 Cenator Hip System Acetabular Cup, Ultra High Molecular Dia 40 - 62mm, 22, 26, 28 heads
weight Polyethylene
De Puy AustraliaDP115 Duraloc Enduron Liner Polythene Liner in Neutral or 10 or 20 22.225 or 26 or 28 or 32mm size 48-74 Also grouped in Hip
Degree or +4 Group 20a
DP172 PLAD Wroblewski Cup Angle bore Left and 22mmRight UHMWP
DP173 PLAD PLAD for cups S/S and Polyethylene 22.225mm, 26mm and 28mmDP182 Charnley Hip System Polythene, OGEE or LPW or FLANGED 22.225 or 28 or 32, 40 to 53mmDP563 Wroblewski Cup Golf Ball Left and right UHMWP 22mm size 40-53mm
PART A - Prostheses List by Category, Groups and Sponsor Page 206 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Manufacturing Technology Pty LimitedGM022 Edinburgh Total Hip System (Acetabular Acetabular Cup UHMWPE 44mm to 56mm
Component)
Global Scientific Pty LtdGS192 Prostheses, Joint, Hip, Total All Poly Cup PR Plus 42 -64mm dia
Link Orthopaedic AustraliaLO018 LINK Lubinus SP Hip Prosthesis Cup: Muller 44 - 58mm, 40mm
Orthotech Pty LtdOH105 Lima Total Hip Replacement System Mueller UHMWPE Cup (Cemented) 44 - 62mmOH154 Coriolis Polyethylene Cup Dia Int. 22-28 -32/ Dia Ext. 40-60
Smith & Nephew Surgical Pty LtdSN288 Reflection Acetabular Cup 22 - 36mm, 42 - 76mm
Stryker Australia Pty LtdST552 Osteonics hip prostheses All poly cup polyethylene OD: 46-61mm. ID: 22, 26, 28, 32mm
ZimmerZI027 Acetabular Cup Zimmer Cemented Acet. (ZCA) - 47 - 61
Polyethylene
ZI368 Apollo Hip System Apollo Hooded Cement Acetabular Cup - 28/46mm to 28/62mmZI383 MS30 Hip - Cups Cemented Low Profile with Metasul - PE with 38 to 58mm
special metal alloy
Group 18b - Cups, cemented, hooded and unhooded, modified polyethylene
B Braun Australia Pty LtdBB036 BI-CONTACT HIP SYSTEM Unipolar Cup Dia 42-54mmBB050 Down Asiana Hip System Cemented Cup Size 40-43
Biomet Australia Pty LtdBI030 Scientific Hip Prostheses System Acetabular Component UHMWPE, 22, 26,28mm x (46-60mm) BI064 Bioclad Hip System Acetabular Cup, UHMWPE 22,28,32mm, size 39-69mmBI067 Stanmore Total Hip System Acetabular Cup, UHMWPE 25-32mm x size 40-53mm
PART A - Prostheses List by Category, Groups and Sponsor Page 207 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW029 Contemporary Hip System Range Duration Poly Cup - Enhanced ID: 26, 28, 32. OD 46, 48, 50, 52, 54,
56, 58, 60
HW030 Contemporary Hip System Range Flanged Poly Cup - Enhanced ID: 26, 28, 32. OD 46, 48, 50, 52, 54, 56, 58, 60
HW035 Exeter Hip System Exeter Duration Cup - Enhanced OD:40-60mm, ID: 22, 26, 28, 30 Also grouped in Hip Polyethylene - Low and High Profile Group 28
HW036 Exeter Hip System Exeter Duration X-Tra Cover Cup - OD:40-60mm, ID: 22, 26, 28, 30Enhanced Polyethylene
Mathys AustraliaMA027 CCB Cemented Cup Full profile / low profile special cup 28/32 ID - 42/64 OD
Orthotech Pty LtdOH104 Lima Total Hip Replacement System Mueller Ceramic and UHMWPE Cup 44 - 62mm
(Cemented)
Smith & Nephew Surgical Pty LtdSN282 Opera Acetabular Cup Flanged UHMWPE 22 - 28mm; 40 - 53mmSN695 Opera Acetabular Cup Flanged - XLPE 22-36mm, 42-76mmSN696 Reflection Acetabular Cup - XLPE 22-36mm,40-61mm
Stryker Australia Pty LtdST013 Hip - Trident All Polyethelene Cup Enhanced Polyethylene 40-64mm(Outer Diameter)
ZimmerZI314 ZCA All Poly Acetabular Cup - XLPE Highly crosslinked ultra high molecular 22, 26, 28 & 32 mm heads; 47-61mm
weight polyethylene diameter; flanged and non-flanged
ZI384 MS30 Hip - Cups Cemented Low Profile - PE 22/36 to 32/64
Group 18c - Cups, cemented, constrained, modified and unmodified polyethylene
Biomet Australia Pty LtdBI091 Kasselt Acetabular Cup System Acetabular Cup, UHMWPE 46-70mm
Howmedica IncorporatedHW043 Brunswick Cup Polyethylene 44, 48, 50, 52, 54, 56mm OD
Link Orthopaedic AustraliaLO019 LINK Lubinus SP Hip Prosthesis Eccentric 44 - 58mm
PART A - Prostheses List by Category, Groups and Sponsor Page 208 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI028 Acetabular Cup Zimmer Flanged Cup (ZFC) - Polyethylene 47 - 61
Group 19a - Shell, uncemented, Grit blast, not HA
Advanced Surgical TechnologiesAD103 Lineage Acetabular System Titanium Shells 40 - 80mm in 2mm incrementsAD113 Transcend Articulation System Transcend cup - titanium 42 - 74mm in 2mm incrementsAD126 WMT Interseal Acetabular Shells and Titanium acetabular shell 42 - 68mm in 2mm incrementsAD226 Lineage Acetabular System Titanium Deep Profile Multi Hole 46 - 74mm in 2mm increments
Acetabular Shell
Global Scientific Pty LtdGS214 Bicon - PLUS Cementless Cup 01, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Mathys AustraliaMA439 ExpanSys Cup Cementless acetabular component for hip acetabular shell/cup 44-72mm range Also grouped in Hip
arthroplasty titanium expandable cup with Group 22b either p/e or m/m inlay
MA440 ExpanSys Cup Cementless acetabular component for hip UHMW-PE inlay 44-72mm rangearthroplasty titanium expandable cup with either p/e or m/m inlay
MA442 Macrofit, Tristabil and Unicup Systems Modular Keramed titanium acetabular 44-72mm (2mm increments)component to include MACROFIT/TRISTABIL/UNICUP
Group 19b - Shell, uncemented, Grit blast, HA
Advanced Surgical TechnologiesAD119 Transcend Articulation System Titanium HA coated cup 42 - 74mm in 2mm increments
B Braun Australia Pty LtdBB243 Plasmacup Isotan 44mm-68mm Also grouped in Hips
Groups 19h, 19a, 19g
Global Scientific Pty LtdGS170 PLUS Hip Joint Prostheses System EP Fit Multi/Hole Cup 40 - 68mm Dia
Howmedica IncorporatedHW014 ABG 11Cup with Hydroxyapatite ABG11 Acetabular Cup - HA Sizes 42mm to 74mm OD in 2mm
PART A - Prostheses List by Category, Groups and Sponsor Page 209 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW015 ABG 11Cup with Hydroxyapatite ABG II Ceramic Cup - HA coated/Titanium Sizes 44mm to 66mm OD in 2mm
Link Orthopaedic AustraliaLO032 CFP Cup ( TOP CUP) - 40 - 68mm
Orthotech Pty LtdOH094 Lima Total Hip Replacement System Uncemented Cup with HA/Porous Coat 44 - 66mmOH140 Atlas Acetabular Cup System Titanium & HA Atlas Cup 40-74mmOH143 Atlas Acetabular Cup System Titanium & HA Atlas Screw Dia 6.5mm 15-50mm L
Stryker Australia Pty LtdSK092 ABG Cup with Hydroxyapatite ABGII Acetabular HA Shell with 32mm 52,54mm OD
ID ceramic insert
ST547 Restoration acetabular gap ring Titanium 48-72mm OD in 2mm increments
Surgical HouseSU017 Furlong Acetabular Cup H-AC cementless (CSF, FRF, Threaded 41-70mm
& Tri-Fix)
Group 19c - Shell, uncemented, Beaded, not HA
De Puy AustraliaDP360 Sector Cups Sector (Titanium) Size 48 to 66DP361 Solution Deep Profile Cup Deep Profile Titanium Size 56 - 80 mmDP551 Bantam Shells Bantam Titanium Size 38 - 46DP558 Duraloc 100 Series Cup 100 series Titanium Size 48 - 66DP975 SROM Total Hip System (Titanium) Obolong Ace both left and right 28mm & 32mm size 51+E15N - DY010 SROM Total Hip System (Titanium) ZTT1 & 2 or arthropor 1& 2 or Super 39 - 72 mm
Cup or Gripper
Endotec Australia Pty LtdEA003 Buechel-Pappas Integrated Total Hip Acetabular Cup-Ceramic coated titanium 45mm to 69mm
Replacement System
EA004 Buechel-Pappas Integrated Total Hip Acetabular Bearing 45mm to 65mmReplacement System
Howmedica IncorporatedHW068 Vitalock Acetabular System Solid-Back Cup - Vitallium/Porous 42 to 76mm OD in 2mm increments
PART A - Prostheses List by Category, Groups and Sponsor Page 210 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW069 Vitalock Acetabular System Cluster Cup - Vitallium/Porous Coated 42 to 76mm OD in 2mm increments
Mathys AustraliaMA021 Modular Shell CBF cup with fin & screws 46 mm - 68mm OD
Smith & Nephew Surgical Pty LtdSN258 Axis Cup Uncoated Titanium Alloy 28, 32mm ID; 44 - 60mm ODSN285 Reflection Acetabular Cup, Porous Titanium Alloy 42 - 80mmSN287 Reflection Acetabular Cup Titanium Alloy 42 - 76mmSN290 Reflection Acetabular Shell Ceramic, Porous 46-66mm OD
Titanium Alloy
SN296 Reflection Acetabular Cup Revision Porous Titanium 42 - 76mm Alloy
SN728 Reflection Revision Cup, Porous, Multihole 50-68mm
Group 19d - Shell, uncemented, Beaded, HA
Australian Surgical Design & Manufacture Pty LtdAE038 Heco Hip System Titanium Cup Implant 42mm - 76mm
De Puy AustraliaDP557 Duraloc Cup Sector or 100 series Polished inner or Inner 48 to 66
polisherd Titanium or HA
DY031 Option Cup system Option Ha 46-66 mmDY278 Pinnacle Acetabular Cup System Pinnacle 100 or 300 or Sector or 1200, 38-80mm
STD or HA Acetabular Cup
Global Orthopaedic TechnologyGO040 Consensus Hip System Acetabular Shell Porous/HA Ti 42mm to 68mm
Howmedica IncorporatedHW070 Vitalock Acetabular System PA Solid-Back and Cluster Cup - 42 to 76mm OD in 2mm increments
Vitallium/Periapatite coated
Smith & Nephew Surgical Pty LtdSN260 Axis HA Cup Titanium Alloy Axis Shell 44 - 60mm Axis II Shell 44 -
64mm
SN286 Reflection Acetabular Cup HA Coated Titanium 42 - 80mmSN688 Reflection HA Coated acetabular ceramic cup Sizes 45 - 66
PART A - Prostheses List by Category, Groups and Sponsor Page 211 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN718 Reflection Revision Cup, Porous HA Coated, 50-68mmSN729 Reflection Revision Cup, Porous HA Coated, 62-80mm
Peripheral Holes
Group 19e - Shell, uncemented, Mesh, not HA
ZimmerZI034 Acetabular Cup Trilogy Shell - Titanium 38 - 80ZI042 Acetabular Cup Trilogy AB Multi-Hole Shell - Titanium 48 - 70ZI043 Acetabular Cup Trilogy AB Cluster Hole Shell - Titanium 48 - 70ZI386 Fitmore Cup Uncemented Cup - Fitmore - Ti alloy 42 to 68mm
Group 19f - Shell, uncemented, Mesh, HA
ZimmerZI035 Acetabular Cup Trilogy HATCP Shell - Titanium 38 - 80ZI040 Acetabular Cup Trilogy AB HA-TCP Multi-Hole Shell - 38 - 80
Titanium
ZI041 Acetabular Cup Trilogy AB HA/TCP Cluster Hole Shell - 38 - 80Titanium
ZI303 Trilogy Acetabular System Minimally invasive acetabular cup 40 - 80mm outer diameter
Group 19g - Shell, uncemented, Plasma, not HA
Advanced Surgical TechnologiesAD262 Procotyl-E cup acetabular cup titanium alloy 52mm - 76mm, in 2mm increments
Biomet Australia Pty LtdBI028 Asian Hip System Acetabular Cup, UHMWPE, Chrome 28mm x (44-60mm)
Cobalt Cemented
BI038 Rx90 Hip System Acetabular Cup and liner, Titanium Alloy, 40-70mmUHMWPE, Cementless / Cemented
BI065 Vision Acetabular System Acetabular Cup System, Cemented, 9-19mmCementless, Titanium, Chrome Cobalt, UHMWPE
BI111 Mallory Head Hip System Acetabular Shell, Titanium 40-80mm
PART A - Prostheses List by Category, Groups and Sponsor Page 212 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI699 McLauglin Plus 5 Acetabular Shell Acetabular Titanium Shell 46 - 80mm
Stryker Australia Pty LtdSK128 Trident Acetabular Component System Trident Hemispherical Acetabular Shells. Shell sizes 42mm - 74mm OD
Made of Titanium (Ti-6A1-4V) with an Arc Deposit Surface
Group 19h - Shell, uncemented, Plasma, HA
Biomet Australia Pty LtdBI101 Bi Hapro Hip System Ringloc Cup, HAP Coating uncemented 46mm to 70mmBI110 Mallory Head Hip System Acetabular Shell, HAP Coated, Titanium 40-80mmBI112 Mallory Head Hip System Acetabular Shell, Solid, HAP Coated, 40-80mm
Titanium
BI116 Mallory Head Hip System Acetabular PMI Component, Titanium 44-72mmBI770 Exceed Acetabular System Shell, Ti Shell sizes 40-70mm
Corin Australia Pty LtdCR018 DC Fit Cup Metal Backed Cemented CoCr cup with UHMPWE 38-62mmCR019 DC Fit Cup Metal Backed CoCr cup, Cor plasma spray with HAP 42mm-70mm
coating, with/without screws
CR074 Alpha Lock Plus Titanium Hip Cup Titanium hip cup with special pre-closed 42 - 70mm Diameterfixation holes for self-tapping counter sunk screws, UHMWPE inlay.
CR085 Alpha Cera Fit Hip Cup Cup is made of High Grade Titanium 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62,Alloy with Bonit coating 64, 66, 68, 70, & 74mm
Global Manufacturing Technology Pty LimitedGM013 Rim Cup Acetabular Shell Porous/HA Ti 44 to 64mmGM017 Cer-Met Series II (Acetabular Component) Acetabular Shell Porous/HA Ti 46mm to 62mm
Stryker Australia Pty LtdSK198 Trident Acetabular Component System HA coated hemispherical acetabular cup 40mm OD through to 74mm OD (OD=
(HA= Hydroxyapatite) Outer Diametre)
ST548 Trident acetabular component system Trident shell, titanium - HA coated 40-74mm OD in 2mm incrementsST554 Osteonics secur-fit - HA PSL acetabular Secur-fit PSL shell titanium - HA coated OD: 40-72mm in 2mm increments ST555 Osteonics secur-fit - HA PSL acetabular Secur-fit ABC shell titanium - HA coated OD: 40-72mm in 2mm increments
for use with ceramic liners
PART A - Prostheses List by Category, Groups and Sponsor Page 213 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST558 Osteonics secur-fir HA PSL acetabular Secur fit XTRA shell, titanium - HA 48-80mm OD in 2mm incrementscoated peripheral screw holes
ST933 Trident Multi-Hole Acetabular Shell Composition - Titanium (Ti-6AL-4V) Shell sizes: 42 - 74mm ODwith Arc Deposit Surface and Pruefix HA
Taylor Bryant Pty LtdTB068 Groupe Lepine Total Hip Replacement MBA/Pavi Acetabular Cup 46 - 64mm in 2 mm increments & 0 or
10 Degrees
TB070 Groupe Lepine Total Hip Replacement Tetras Acetabular Cup 44 - 64mm in 2mm incrementsTB221 Pavi Acetabular Cup Acetabular Cup 46, 48, 50, 52, 54, 56, 58, 60, 62, 64mm
Group 19i - Shell, uncemented, Titanium, not HA
ZimmerZI353 Allofit Cup Allopro/Allofit Finned Cup - Titanium 46 - 68mmZI385 CLS, CLW Prosthesis - Cups Uncemented Cup for CLS & CLW - Ti 46 to 62mmZI396 Variall Screw Cup System Titanium Shell - Ti alloy 46 to 62mmZI456 Converge Acetabular System Porous Ti alloy Dia 39-71mm
Group 19j - Shell, uncemented, Titanium, HA
Global Scientific Pty LtdGS169 PLUS Hip Joint Prostheses System EP Fit PLUS Ti/HA Cup 40 - 68mm Dia
Group 19k - Shell, uncemented, Other, not HA
De Puy AustraliaDP188 Thackray Hip System Acetabular Cup Self centering cup 28mm size 39-65
ZimmerZI325 Trabecular Metal Modular Acetabular Porous Tantalum Modular Shell 38-80mm diameter; Cluster, Multiholed,
No Holes
Group 20a - Liner, unmodified polyethylene
Advanced Surgical TechnologiesAD127 WMT Interseal Acetabular Shells and Duramer UHMWPE Liner Grp 1, Grp 2, Grp 3, Grp 4
PART A - Prostheses List by Category, Groups and Sponsor Page 214 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD263 Procotyl-E cup polyethylene liner Group 1 - 3 sizes 22 - 32
Australian Surgical Design & Manufacture Pty LtdAE037 Heco Hip System Polyethylene Insert 42mm - 76mm
B Braun Australia Pty LtdBB237 Plasmacup PE insert Chirulen 44mm-68mm diameters, 22.2mm-32mm
articulations
Corin Australia Pty LtdCR022 DC Fit Cup Metal Backed Acetabular Liner 0 & 10 deg offset Sz 1- Sz 6
De Puy AustraliaDP112 Duraloc Enduron Liner Enduron Liner 28 or 32mm +4 size 48-66DP222 Thackray Hip System Poly Liner Custom Made to orderDP552 Bantam Liners Bantam Enduron Polyethylene 10 Degree 22.225 & 26 & 28mm size DP968 SROM Total Hip System UHMWPE or Polythene Liner 22 or 26 or 28 or 32mm size M28 - XL DY032 Option Cup system Liner LPW or STD 38-80 mmDY280 Pinnacle Acetabular Cup System Pinnacle GVF +4 or Neutral or 10 Degree 38-80mm x 22.225 or 26 or 28 or 32 or
or Lipped Liners
Global Manufacturing Technology Pty LimitedGM012 Rim Cup Acetabular Cup Inserts UHMWPE 28mm 21 to 26mmGM016 Cer-Met II (Acetabular Component) Acetabular cup Inserts UHMWPE 28mm 46mm to 62mm
and 32mm
Global Scientific Pty LtdGS164 PLUS Hip Joint Prostheses System Bicon-PLUS PE - Liner 1 to 9GS165 PLUS Hip Joint Prostheses System Bicon-PLUS PE - Hooded Liner 1 to 9GS171 PLUS Hip Joint Prostheses System EP Fit PE Liner 40 - 68mm DiaGS191 Prostheses, Joint, Hip, Total Bofor PE Hooded Liner 48 -70mm dia
Link Orthopaedic AustraliaLO033 CFP Insert( TOP INSERT) - 40 - 68mm
Orthotech Pty LtdOH096 Lima Total Hip Replacement System Protruded UHMWPE Liner A, B, C, D, EOH141 Atlas Acetabular Cup System Titanium & HA Atlas Poly Insert Std. Dia 28mm
PART A - Prostheses List by Category, Groups and Sponsor Page 215 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
OH142 Atlas Acetabular Cup System Titanium & HA Atlas Alumina Insert Dia 28mm Also grouped in Hip Group 20c
Smith & Nephew Surgical Pty LtdSN283 Optifix Acetabular: Liner, 20 degree 43 - 76mmSN289 Reflection Acetabular Liner 22 - 36mm, 42 - 76mmSN293 Reflection Lateralised Liner, UHMWPE 22 - 36mm, 42 - 76mm
Stryker Australia Pty LtdST559 Omnifit cup insert Series II - 0 degree cup insert polyethylene 22, 26, 28 & 32mm diaST560 Omnifit cup insert Series I - 0 degree cup insert, polyethylene 22, 26, 28 & 32mm diaST561 Omnifit cup insert Series II - 10 degree cup insert 22, 26, 28 & 32mm diaST562 Omnifit cup insert Series I - 10 degree cup insert 22, 26, 28 & 32mm diaST563 Omnifit cup insert Series II -20 degree cup insert, 22, 26, 28 & 32mm diaST564 Omnifit cup insert Series I -20 degree cup insert polyethylene 22, 26, 28 & 32mm dia
Surgical HouseSU020 Furlong Acetabular Cup Insert polyethylene 22, 28, & 32mm inner diam 44mm -
70mm outer diam
Taylor Bryant Pty LtdTB066 Groupe Lepine Total Hip Replacement Liner Hooded/Flat 44 - 64mm in 2mm incrementsTB218 Polyethylene Insert with 10 Degree Rim UHMWPE: Composition 46, 48, 50, 52, 64, 56, 58, 60, 62, 64mm
ZimmerZI031 Acetabular Cup Trilogy Eccentric Liner - Polyethylene 36-70ZI033 Acetabular Cup Trilogy Oblique Liner - Polyethylene 38 - 62ZI037 Acetabular Cup Trilogy Liner - Titanium 38 - 80 in 22, 28, 32ZI367 Armour Cup Armor Cup P/E Insert 22 to 32mm, FF to 66QUZI388 Inserts for Cups PE (CLS, CLW, Fitmore, Allofit) 22, 28, 32mm Size 46 to 62
Group 20b - Liner, modified polyethylene
Biomet Australia Pty LtdBI073 Modular Ceramic System Acetabular Ceramic/ Polyethylene Liner, 28mm, 32mm, -6 to +12mm
UHMWPE
PART A - Prostheses List by Category, Groups and Sponsor Page 216 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI106 Mallory Head Hip System Acetabular Liner, UHMWPE 28 & 32mm, Sizes 21 to 28mmBI107 Mallory Head Hip System Acetabular Liner, UHMWPE 22 & 26mm, Sizes 21 to 28mm
Corin Australia Pty LtdCR073 Alpha Lock, (UHMWPE) Inlays UHMWPE Inlays 28mm 28mm x 48 - 70mmCR075 PE Inserts for Alpha Cera Fit Cups (UHMWPE) Ultra High Molecular Weight 22-28mm Diameter for cup sizes: 42-74mm
(UHMWPE) Polyethylene
De Puy AustraliaDY036 Duraloc Marathon Acetabular Liner Marathon Polyetholene Neutral or 10 28 or 32 mm size 48 - 66DY210 Pinnacle Acetabular Cup System Pinnacle Marathon Liner + 4 or Neutral 38 - 80 mm x 22.225 or 26 or 28 or 32
or 10 Degree or Lipped or 36mm
Global Orthopaedic TechnologyGO038 Consensus Hip System Acetabular Cup Inserts UHMWPE 22mm 42mm to 68mm
to 32mm
Global Scientific Pty LtdGS174 PLUS Hip Joint Prostheses System EP Fit Rex Pol Liner 42 - 68mm Dia
Howmedica IncorporatedHW021 ABG Hip System ABG11 Polyethylene Insert - Enhanced 22mm,28mm,32mm ID
Polyethylene. Standard or 10deg hooded inserts
HW060 PCA Hip System PCA Cup inserts - Enhanced 26mm,28mm,32mm IDHW072 Vitalock Acetabular System System 12 liner - Enhanced Polyethylene 22mm,26mm,28mm, 32mm ID
- For use with Vitalock Cups
HW073 Vitalock Acetabular System 30mm custom insert - Enhanced 30mm IDPolyethylene - For use with Vitalock Cups
Mathys AustraliaMA030 PE Liner CBF cup liner id Size 28mm ID/46mm - 68mm ODMA419 Macrofit, Tristabil and Unicup Systems Modular, Keramed CHIRULEN UHMW- 44mm-72mm
PE insert to fit MACROFIT/TRISTABIL/
Smith & Nephew Surgical Pty LtdSN291 Reflection Anteverted Acetabular Liner XLPE 22 - 36mm, 42 - 76mmSN663 35deg Reflection Liner UHMWPE 50 - 60mmSN698 Reflection Acetabular liner - XLPE (0 & 20 degrees) 22-36mm, 42-76mm
PART A - Prostheses List by Category, Groups and Sponsor Page 217 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN707 Optifix Acetabular Liners, XLPE 43-76mm
Stryker Australia Pty LtdSK013 Trident Acetabular Component System Elevated Rim Inserts - Crossfire Fits 50-70mm with 28,32 and 36mm ID
Options
SK126 Securfit Acetabular Shell Series 11 cup insert CROSSFIRE 28 and 32mm ID insert std (neutral) and polyethylene 10 deg
SK197 ABG II Crossfire Insert Composition: Crossfire Polyethylene Fits 46-72mm System12 Shells in 28 and 32mm inner diameter with 0 and 10 degree insert orientation
SK317 SXL ABG Acetabular Inserts Sequentially cross linked polyethylene Inner diameters: 22mm, 26mm, 28mm, 32mm. For outer diameter shells 40mm to 70mm.
SK318 SXL Trident Acetabular Inserts Sequentially cross linked polyethylene Inner diameters: 22mm, 26mm, 28mm 32mm, 36mm. For outer diameter shells 40mm - 80mm.
SK319 SXL Vitalock Acetabular Inserts Sequentially cross linked polyethylene Inner diameters: 22mm, 26mm, 28mm, 32mm. For outer diameter shells: 40mm - 74mm
ST546 Trident acetabular component system Leteralised cup insert, enhanced 26, 28 & 32mmST549 Trident acetabular component system Trident polyethlene liner, enhanced 22, 26, 28, 32mm dia
polyethlene
ST799 ABG Hip System PEEK Composite inserts to be used with To fit ABG 11 cup sizes OD 50, 52, 54, the ABG acetabular shell. All inserts have 56, 58mm a 28mm internal diameter.
ST930 System 12 +4mm Acetabular Insert Composition - Duration stabilized 28 and 32mm ID with a 10 degree hood polyethylene to fit all sizes of System 12 shells
ST931 System 12 Crossfire Insert Composition - Crossfire polyethylene Fits 46 - 72mm System 12 shells in 28 and 32mm ID with 0 and 10 degree insert orientation
Taylor Bryant Pty LtdTB174 GL - U Hooded Liner Acetabular component for total hip 46, 48, 50, 52, 54, 56, 58, 60, 62, 64mm Also grouped in Hip
Group 20e
ZimmerZI045 Acetabular Cup Longevity XLPE Polyethylene Liner 7mm 46 - 70
Offset
PART A - Prostheses List by Category, Groups and Sponsor Page 218 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI046 Acetabular Cup Longevity XLPE Polyethylene Liner 20 38 - 80Degree
ZI047 Acetabular Cup Longevity XLPE Polyethylene Liner 10 38 - 80Degree
ZI048 Acetabular Cup Longevity XLPE Polyethylene Liner 0 38 - 80Degree
ZI315 Trilogy Acetabular System - Longevity Highly crosslinked ultrahigh molecular 22 + 28 + 32 Head Diameters; 38 - 80mmEccentric weight polyethylene Outer Diameters
ZI317 Trilogy Acetabular System - Longevity Highly crosslinked ultrahigh molecular 22 + 28 + 32 Head Diameters; 38 - 80mmOblique weight polyethylene Outer Diameters
ZI357 Alpha Durasul Insert Durasul Acetabular Cup Inserts - Special 22mm x 42 to 28mm x 68 UHMWPE
ZI360 Converge Durasul Insert - Special UHMWPE 22/39 to 38/81mm ZI393 Variall Screw Cup System Durasul Insert - special UHMWPE II28 to NN28mmZI458 Converge Acetabular System, Durasul UHMWPE highly cross-linked 22-38mmZI470 Alpha Durasul Insert Acetabular Cup Insert, highly crossed 36,32,22mm
linked UHMWPE
Group 20c - Liner, ceramic
Advanced Surgical TechnologiesAD116 Transcend Articulation System Metal CoCr & Ceramic Liner Grp 1, Grp 2, Grp 3, Grp 4 Also grouped in Hip
Group 20d
AD261 Procotyl-E cup ceramic inserts acetabular cup Group 1 - 3, Size 28 and 32
B Braun Australia Pty LtdBB235 Plasmacup Ceramic Insert Biolox forte 44mm-68mm
Corin Australia Pty LtdCR063 Ceramic Insert for Alpha Cera Fit Cup Biolox Forte 28mm Inner Diameter for 48-74mm Cups
De Puy AustraliaDY034 Option Cup system Liner Option Ceramic 46-66 mmDY211 Pinnacle Acetabular Cup System Pinnacle Metal or Ceramic Insert Neutral 48 - 80 mm 22.225 or 28 or 32 or 36
Global Manufacturing Technology Pty LimitedGM001 Rim Cup Acetabular Cup Inserts Ceramic 28mm 23 to 26mm
PART A - Prostheses List by Category, Groups and Sponsor Page 219 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GM024 Cer-Met Series II (Acetabular Component) Acetabular cup Inserts Ceramic 28mm 46mm to 62mmand 32mm
Global Orthopaedic TechnologyGO039 Consensus Hip System Acetabular Cup Inserts Ceramic 28mm to 42mm to 68mm
32mm
Global Scientific Pty LtdGS166 PLUS Hip Joint Prostheses System Bicon-PLUS / Ceramic Liner 3 to 9GS172 PLUS Hip Joint Prostheses System EP Fit Ceramic Liner 48 - 68mm Dia
Mathys AustraliaMA421 Macrofit, Tristabil and Unicup Systems Modular, Keramed BIONIT ceramic 44-72mm
insert to fit MACROFIT/TRISTABEL/UNICAP
Orthotech Pty LtdOH095 Lima Total Hip Replacement System Ceramic Liner A, B, C, D, E
Smith & Nephew Surgical Pty LtdSN257 Axis Ceramic Insert AlO3 28, 32mm ID; 44 - 60mm ODSN297 Reflection Acetabular Liner Ceramic, AlO3 28 - 36mm, 46 - 66mm OD
Stryker Australia Pty LtdSK010 ABGII Cup with Hydroxyapatite Alumina Ceramic Insert 5x sizes in 28mm ID, 3x sizes in 32mm IDST565 Alumina acetabular inserts Ceramic insert, alumina 28, 32 & 36mm dia
Surgical HouseSU018 Furlong Acetabular Cup Insert: ceramic cup (CSF, threaded, FRF 28mm & 32mm inner diam
& Trifix)
Taylor Bryant Pty LtdTB177 GL - Alumina U Liner Acetabular component for total hip 50mm, 52mm, 54mm, 56mm, 58mm,
system, polyethylene
TB219 Biota Alumina Acetabular Liner Acetabular Liner 46, 48, 50, 52, 54, 56, 58, 60, 62, 64mm
ZimmerZI044 Acetabular Cup Trilogy AB Ceramic Liner - Titanium 48 - 70ZI354 Alpha Cerasul Insert Cerasul Acetabular Cups Inserts - 52 to 70mm
Ceramic / PE
ZI394 Variall Screw Cup System Cerasul Insert - Ceramic II28 to NN28mm
PART A - Prostheses List by Category, Groups and Sponsor Page 220 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 20d - Liner, metal
Corin Australia Pty LtdCR062 Metal Insert for Alpha Cera Fit Cup Endocast SL 28mm Inner Diameter for 48-74mm Cups
Global Scientific Pty LtdGS167 PLUS Hip Joint Prostheses System Bicon-PLUS Met Liner 1 to 9GS173 PLUS Hip Joint Prostheses System EP Fit PLUS Met Liner 48 - 68mm Dia
Mathys AustraliaMA022 MOM Liner CBF inlay metal.metal 28/48 - 28/68MA441 ExpanSys Cup Cementless acetabular component for hip Metal on metal inlay 44-72mm range
arthroplasty titanium expandable cup with either p/e or m/m inlay
ZimmerZI361 Inter-Op Metasul Insert - special metal alloy / PE 28/49 to 32/81mmZI469 Inserts for Cups - Metasul Uncemented Cup Insert for CLS, 32mm
Fitmore, Allofit, PE/CoCr - special Metasul alloy, large diameter articulation
Group 20e - Liner, constrained
Biomet Australia Pty LtdBI092 Mallory Head Hip System Acetabular Liner, Constrained, Ringloc, 28-38mm
UHMWPE
BI878 Freedom Constrained Liner Constrained Acetabular Liner - 23 to 62
De Puy AustraliaDP014 Duraloc Constrained Liner Constrained liner with titanium alloy ring 28mm or 32mm, 48 - 74mmDP969 SROM Total Hip System UHMWPE Constrained 0Deg, 10 Deg, 28mm, 32mm,
Smith & Nephew Surgical Pty LtdSN689 Reflection Constrained Acetabular Liner - UHMWPE 22 - 32mm, 42 - 76mmSN701 Reflection Constrained acetabular liner - adaptor ring 42 - 76mm
Stryker Australia Pty LtdST539 Constrained acetabular insert Polyethylene & cobalt chrome 22, 26, 28, 32mm dia
PART A - Prostheses List by Category, Groups and Sponsor Page 221 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST932 Trident Constrained Acetabular Insert Two pre assembled components: Outer Match with 6x Trident shell sizes E, F, G,insert component and a captured UHR H, I, J. Insert sizes E and F require a (Universal Head) component. 22mm head size. Insert sizes G, H, I, J Composition - Cobalt chrome alloy and require a 28mm head size.UHMWPE (ultra high molecular weight polyethylene) with a Titanium 6A1-4V
ZimmerZI030 Acetabular Cup Trilogy Constrained Liner - Polyethylene 50 - 80ZI318 Trilogy Acetabular System - Longevity Highly crosslinked ultrahigh molecular 22 + 28 + 32 Head Diameters; 38 - 80mm
Constrained weight polyethylene Outer Diameters
ZI335 Epsilon Durasul Constrained Liner Composition : Polyethylene Outer Diameter 51 - 71mmZI455 Converge Acetabular System, Durasul UHMWPE highly cross-linked Dia 28-32mm
Protusio Insert
Group 21 - Bonded shell/liner
Global Scientific Pty LtdGS168 PLUS Hip Joint Prostheses System Bicon-PLUS Porous Cup 1 to 9GS187 PLUS Hip Joint Prostheses System Bofor Rev Shell 48-70mm dia Also grouped in Hip
Group 29
Mathys AustraliaMA031 RM Cementless Cup Monomesh/Ceros 80/Titanium 46mm - 68mm
ZimmerZI339 Press Fit - Uncemented Metasal Cup Protek, Metal alloy/PE 48 - 64mmZI387 Press Fit - Uncemented Cup Uncemented Press fit Cup - PE / Ti alloy 22/40 to 32/64mm
Group 22a - Cemented metal on metal, not resurfacing
Surgical HouseSU155 ACCIS Cup - Cemented One piece acetabular cup. Composition: Outside diameter: 46 - 62mm (in 2mm
Cobalt Chrome alloy (CrCoMo) base increments)metal, coated with Titanium Niobium (tiNiob) ceramic
PART A - Prostheses List by Category, Groups and Sponsor Page 222 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 22b - Uncemented metal on metal, not resurfacing
Biomet Australia Pty LtdBI055 Biomet Alternate Bearing Surface Metal on Metal Acetabular Shell, Titanium 46 - 70mmBI057 Biomet Alternate Bearing Surface Metal Acetabular Insert, Chrome Cobalt StandardBI783 M2a Modular Head Component & Special Metal on Metal Acetabular, Chrome 48-70 mm
Acetabular Cup Cobalt, Ti
De Puy AustraliaDY021 Ultima Total Hip System Ultima Metal on metal, Titanium Size Std 28mm 0D and Avg 28mm 10DDY022 Ultima Total Hip System Ultima Metal on metal shell with 3 hole Size 48-68
Titanium
Mathys AustraliaMA023 RM cup with MOM Chrome, cobalt lining Dia 46mm - 64mm
Surgical HouseSU156 ACCIS Cup - Cementless One piece acetabular cup. Composition: Outside diameter: 46 - 62mm (in 2mm
Chrome Cobalt alloy (CrCoMo) base increments)metal, coated with Titanium Niobium (tiNiob) ceramic. The rear of the cup is HA coated to enable cementless fixation
ZimmerZI389 Inserts for Cups - Metasul Uncemented Cup Inserts for CLS, CLW, 28mm
Fitmore, Allofit, PE / CoCr - special Metasul alloy
ZI395 Variall Screw Cup System Metasul Insert - special metal alloy II28 to NN28mm
Group 24a - Resurfacing, metal, not HA
Biomet Australia Pty LtdBI841 Resurfacing Hip System Acetabular Shell CoCr, Ti 44 - 66mm
ZimmerZI467 Durom Resurfacing System - Special Acetabular A - V
Cup, Metasul/Ti alloy
PART A - Prostheses List by Category, Groups and Sponsor Page 223 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 24b - Resurfacing, metal, HA
Advanced Surgical TechnologiesAD213 CONSERVE PLUS Total Hip Resurfacing Titanium Acetabular Shell - Super ID 36 - 52mm, OD 46 - 62mm
System
AD229 Conserve Plus Total Hip Resurfacing Titanium Thin Acetabular Shell - Super 36 - 54mm ID in 2mm IncrementsPolished
Biomet Australia Pty LtdBI842 Resurfacing Hip System Acetabular Shell CoCr, Ti, HA Coated 44 - 66mm
Corin Australia Pty LtdCR048 Cormet 2000 Resurfacing Hip Acetabular cup for resurfacing head Dia 40 -56mm
Cobalt chrome TiAlloy and HAP bicoat
CR087 Cormet Dysplasia Cup High Carbon Cobalt Chrome 48, 52, 56, 60, 64mm
De Puy AustraliaDY328 ASR Hip System Acetabular Cup 38.5-64.5mm
Global Orthopaedic TechnologyGO044 Consensus Hip System Acetabular cup porous coated CoCr 44-66mmGO048 ICON Hip System Acetabular Cup Porous Coated CoCr 44-66mm cups
Smith & Nephew Surgical Pty LtdSN742 Birmingham Hip Resurfacing Prostheses - Porous Coated 44 - 66 mm cups
Acetabular Cup
Flange SuffixGlobal Orthopaedic Technology
GO045 Consensus Hip System Dysplasia cup porous coated + screws 46-66mmGO050 ICON Hip System Dysplasia Cup Porous Coated with 46-66mm
Screws CoCr
Smith & Nephew Surgical Pty LtdSN744 Birmingham Hip Resurfacing Dysplasia Acetabular Cup Porous Coated with Dysplasia Cups: 46 - 66 mm cups
screw fixation
PART A - Prostheses List by Category, Groups and Sponsor Page 224 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 24c - Resurfacing, ceramic
Stryker Australia Pty LtdSK175 International Hip System Resurfacing hip stem head and cup - Cup
ceramic, PEEK and SS or CoCr
Hip - Acetabular Reconstruction DevicesGroup 25 - Acetabular Reconstruction Shells
B Braun Australia Pty LtdBB247 Reconstruction Shell Isotan 52-64mm, left and right
Biomet Australia Pty LtdBI142 Mars Acetabular System Acetabular Shell, Titanium Sizes 48 to 60mmBI700 Par 5 Protrusio Acetabular System Obturator Hook - Titanium Metal One size onlyBI701 Par 5 Protrusio Acetabular System Blade - Titanium Metal One size onlyBI703 Par 5 Protrusio Acetabular System Acetabular Flange - Titanium Metal Short (L,R,N), Medium (L,R,N), Long
(L,R,N)
BI704 Par 5 Protrusio Acetabular System Acetabular Shells - Titanium Metal 56 - 72mmBI836 Par 5 Protrusio Acetabular System Acetabular Shell CrCo, Ti, Ha Coated 56 - 72mm
De Puy AustraliaDP945 Octopus Cup System Cup Size 50, 55mmDY169 Ultima Acetabular Ring Ultima Acetabular Ring 40 - 62mm
Global Manufacturing Technology Pty LimitedGM010 Batcup Revision Acetabular Cup including 21 to 24mm
locking ring and lugs
Howmedica IncorporatedHW064 Petrusion Shell Kerboull - Vitallium 44, 48, 52, 56, 60mm OD
Link Orthopaedic AustraliaLO013 Link McMinn Acetabular Reconstruction Cementless Cup HAC Coated 45 - 55 mm
Cup System
LO014 Link McMinn Acetabular Reconstruction Polyethylene Insert 45 - 55 mmCup System
PART A - Prostheses List by Category, Groups and Sponsor Page 225 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthotech Pty LtdOH109 Lima Total Hip Replacement System SPH Revision Cup 50 - 66mmOH112 Lima Total Hip Replacement System Titanium Revision Bilobo Cup 50 - 58mm
Smith & Nephew Surgical Pty LtdSN265 Contour Acetabular Roof Reinforcement Shell 44 - 74mm OD
Taylor Bryant Pty LtdTB175 B2C Espace Acetabular Cup Acetabular component for revision hip Espace Shell 0 degrees peak, diam 50mm,
with plastic insert, Espace Shell 0 degrees peak, diam 54mm, with plastic insert, Espace Shell 0 degrees peak, diam 58mm, with plastic insert, Espace Shell 0 degrees peak, diam 62mm, with plastic insert, Espace Shell 20 degrees peak, diam 50mm, with plastic insert, Espace Shell 20 degrees peak, diam 54mm, with plastic insert, Espace Shell 20 degrees peak, diam 58mm, with plastic insert, Espace Shell 20 degrees peak, diam 62mm, with plastic insert, Espace Shell 8mm extension, diam 50mm, with plastic insert, Espace Shell 8mm extension, diam 54mm, with plastic insert, Espace Shell 8mm extension, diam 58mm, with plastic insert, Espace Shell 8mm extension, diam 62mm, with plastic insert, Espace Shell 14mm extension, diam 50mm, with plastic insert, Espace Shell 14mm extension, diam 54mm, with plastic insert, Espace Shell 14mm extension, diam 58mm, with plastic insert, Espace Shell 14mm extension, diam 62mm, with plastic insert, Espace Shell 20mm extension, diam 50mm, with plastic insert, Espace Shell 20mm extension, diam 54mm, with plastic insert, Espace Shell 20mm extension, diam 58mm, with plastic insert, Espace Shell 20mm
ZimmerZI249 Continuum hip system Acetabular cups - elliptical Primary 22 and 28mm diameterZI250 Continuum hip system Acetabular cups - elliptical Revision 22 and 28mm diameterZI271 Hedrocel button Hedrocel tantulum Small and medium x 10mm thick
PART A - Prostheses List by Category, Groups and Sponsor Page 226 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI276 Hedrocel strut Hedrocel tantulum 10mm longZI371 Lor Acetabular Cup Oblong Revision Shell, cementless - Ti 52/58 to 72/84ZI372 Lor Acetabular Cup P/E Insert 28, 32ZI457 Converge Acetabular System, Protusio Ti alloy 39-81mm
Porous Shell
Group 26 - Acetabular Reconstruction Cages
Advanced Surgical TechnologiesAD264 Procotyl-E T Plate titanium alloy One size only for left and rightAD265 Procotyl-E screws titanium alloy Diameter 5.5mm, Length 15 - 60mmAD266 Procotyl-E double plate titanium alloy 4, 5 and 6 holes left and right sidesAD267 Procotyl-E hooks titanium alloy 18mm, 23mm, 28mmAD268 Procotyl-E L Plates titanium alloy One size only for left and right
Biomet Australia Pty LtdBI872 MAX-Ti Modular Protrusio Cage Modular Protrusion Cage, Ti Protrusio Cage 52, 56, 60, 64, 68, 72mm
Left & Right
BI874 MAX-Ti Modular Protrusio Cage Modular Protrusion Cage, Ti Iliac Flange Augment 6mm Flat & Wedge
De Puy AustraliaDP944 Octopus Cup System Screw 6.5mm Diameter length 15-65mmDP946 Octopus Cup System Hooded Liner 22.2, 28 and 32mm Size 55, 50DP947 Octopus Cup System Reorientation Liner 22.2, 28 and 32mm Size 50-55mmDP948 Octopus Cup System Ring Right and Left Size 50-55mmDP949 Octopus Cup System Ring Long left and right Size 50-55mmDY064 Protrusio Cage Left and right Cobalt Chrome/Titanium Size 52OD X 49ID, 56OD X 53ID,
60OD X 57ID
Howmedica IncorporatedHW044 Exeter Hip System X-Change Revision Mesh - Calcar - One size only - 153mm length
Stainless Steel
HW045 Exeter Hip System X-Change Revision Mesh -Rim - SmallStainless Steel
PART A - Prostheses List by Category, Groups and Sponsor Page 227 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW046 Exeter Hip System X-Change Revision Mesh - Rim - LargeStainless Steel
Orthotech Pty LtdOH108 Lima Total Hip Replacement System Acetabular Revision Plate 50, 54, 58, 62, 64mmOH144 Coriolis CrCo - Fixation screws, Support Ring Fixation Screws - Dia 6.5mm/Length 15-
50mm
Stryker Australia Pty LtdST557 Restoration gap II acetabular shell GAP CUP II titanium anatomic (left & 48-72mm OD in 2mm increments
ZimmerZI001 Zimmer Acetabular Cup Roof ring 46 - 60mmZI002 Zimmer Acetabular Cup Acetabular Cage - Left, right 52, 58, 64mm ODZI390 Acetabular Reinforcement Roof Ring - Ti alloy 44 to 58mmZI391 Acetabular Reinforcement Roof Ring with Hook - Ti alloy 36/23 to 64/23mmZI392 Acetabular Reinforcement Protrusio Cage - Ti alloy 44 to 50mm (left and right)
Hip - Femoral Components - Primary & RevisionsGroup 10 - Thrust Plates
ZimmerZI349 Thrust Plate Prosthesis Allopro Thrust Plate - Ti alloy 38 to 44mmZI350 Thrust Plate Prosthesis Allopro Lateral Plate - Ti alloy Std & Long (15 & 25 deg)ZI351 Thrust Plate Prosthesis Allopro Threaded bolt - CoCr alloy 70 to 89mmZI352 Thrust Plate Prosthesis Allopro Cortical Screw - SS 36, 60mm
Group 11 - Unipolar / Monoblock
B Braun Australia Pty LtdBB047 Downs Austin-Moore Hip Stem 39-54mmBB048 Downs Thompson Stem Stem 38-55mm
Biomet Australia Pty LtdBI060 Austin Moore Self Locking Hip Prosthesis Straight Standard Femoral Prostheses, 38-55mm
System Titanium
BI062 FR Thompson Hip Prosthesis System Modular Curved Femoral Stem, Titanium. 38mm - 55mm
PART A - Prostheses List by Category, Groups and Sponsor Page 228 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI077 Austin Moore Self Locking Hip Prosthesis Femoral Component, Long Stem, 38 to 56mm System
De Puy AustraliaDP167 Thompson Implantable Hip Thompson stems Ortron Size 41-54DP168 Austin Moore Hip Prosthesis Narrow or Standard Ortron Size 38-54mmDP170 Austin Moore Hip Prosthesis Ortron Custom sizes
Hipokrat Australia Pty LtdHP011 Austin Moore Hip Prostheses Standard and Narrow Stem Standard- Head Diam. 38mm-58mm,
Stem Length 127mm-154mm; Narrow - Head Diam. 38mm-58mm, Stem Length 140mm-152mm
Howmedica IncorporatedHW025 Austin Moore Endoprosthesis Long Stem - Vitallium Head size 38 to 63HW026 Austin Moore Endoprosthesis Standard Stem - Vitallium 105-165mm length, Head size: 38 to 57
Surgical HouseSU014 Austin Moore Chrome cobalt hip prosthesis 39-56mm headSU015 Thompson Chrome cobalt hip prosthesis 39-55mm head
ZimmerZI008 Zimmer Hip Systems Femoral Stem Austin Moore - Stainless Steel Sizes 38 - 60ZI287 Zimmer Cemented Hip Prostheses Thompson Hip Length 38 - 63mm
Group 1a - Cemented, unpolished, no pre-coat, straight, short and standard length, all
Global Orthopaedic TechnologyGO036 Consensus Hip System Femoral stem cemented CoCr Sizes 6 to 14 Also grouped in Hip
Group 1b
Mathys AustraliaMA016 CCA Cemented Stem Straight / standard / lateral sterile 7.50mm -17.5mm
Smith & Nephew Surgical Pty LtdSN010 Basis Femoral Component Hip stem, Cobalt Chromium Length 115 - 135mmSN127 Marathon Femoral Component Hip stem, Cobalt Chrome Lengths 115 - 135mmSN277 Endoprosthesis CoCr 38 - 54mm
PART A - Prostheses List by Category, Groups and Sponsor Page 229 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stryker Australia Pty LtdST576 Omnifit hip system OMNIFIT cemented femoral component Stem sizes 4-11 Also grouped in Hip
- normalised cobalt chrome Group 1b
ST577 Omnifit hip system OMNIFIT 'C' stem - cemented cobalt Stem sizes 4-11 Also grouped in Hip chrome, collared and collarless, 132 Group 1bdegree offset
ST586 Osteonics omnifit head/neck hip stem Head/neck hip stem cobalt chrome Stem sizes 5, 7 & 9ST802 Accolade C Femoral Hip System Forged CoCr cemented hip system Stem sizes 2 - 7
ZimmerZI015 Zimmer Hip Systems Femoral Stem VerSys Cemented - Cobalt Chrome 11 - 17ZI337 Natural Hip System Femoral Stem, CoCr 140 - 160mm
Group 1b - Cemented, unpolished, no pre-coat, tapered, short and standard length, all
Biomet Australia Pty LtdBI036 Rx90 Hip System Primary Femoral Stem, Chrome Cobalt, 9-17mm
Cemented
BI039 Integral Hip System Femoral Centraliser, Cemented , Cobalt 9-17mmChrome
BI042 Answer Hip System Femoral Stem, Chrome Cobalt, Cemented 9-17mmBI047 Hip Fracture System Femoral Stem, Chrome Cobalt, 8-16mm
Cemented/Cementless
BI050 Bi-Metric Hip System Interlok Stem, Titanium, 7-17mmCemented/Cementless
BI063 Bimetric Hip System Stem, Modular, Titanium, Chrome Cobalt 7-17mmBI069 Biomet Taperloc Hip System Femoral Stem, Standard or Laterised. 7.5mm to 20mm diameter
Titanium, Cemented
BI132 Mallory Head Hip System Femoral Stem, Cobalt Chrome 7-19mm Also grouped in Hip Group 2b
Corin Australia Pty LtdCR030 Freeman -Morgan Total Hip System Stem: modular cemented CoCr 14mm-22mm diameter
De Puy AustraliaDP176 Charnley Hip System CDH Ortron CDHDP178 Charnley Hip System Ortron Round Back SNS 35, STS 35
PART A - Prostheses List by Category, Groups and Sponsor Page 230 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP180 Charnley Hip System RB 40, RB 40 NRW, RB 45 Ortron Stem RB 40, RB 40 NRW, RB 45DP181 Charnley Hip System Ortron Stem EH 40 or Fl 35 or 40 or Fl 45 or EH 45DP199 Elite Modular Hip System Elite Plus Stem Ortron CDHDP203 Elite Modular Hip System Elite Plus Stem High Offset Ortron Size 2 - 5DP208 Elite Modular Hip System Elite Plus Stem Primary Ortron Roundback Size 40 or 1-4DP209 Elite Modular Hip System Elite Plus Stem Primary Ortron Flanged Size 2 - 5
Mathys AustraliaMA017 FULFIX Cemented Stem Standard modular / lateral modular sterile 3.0mm - 12.5mmMA423 Unistem 2 Cemented stem for hip arthroplasty Sizes 6-16; Length 125-165mm
Smith & Nephew Surgical Pty LtdSN301 Spectron EF/ Spectron Femoral Stem Non Porous 1- 5
Collared/Collarless High Offset
SN302 Spectron EF/Spectron Femoral Stem Non Porous 1- 5Collared/Collarless CoCr, Std
SN304 Synergy Femoral stem Non Porous Co Cr 9-20SN363 Matrix: Modular Hip System Practica Non Porous Stem CoCr Collarless Stem 8,10,12. Collared Stem
8,10,12,14. Collarless/Collared Femur
SN692 Spectrum EF Tantalum marked high offset and Size 40 - 74mmstandard stems
Group 2a - Cemented, polished, no pre-coat, straight, short or standard length, all
Biomet Australia Pty LtdBI066 Stanmore Total Hip System Modular Femoral Stem - Standard and Size 1-5
Straight, Chrome Cobalt
Surgical HouseSU021 Furlong Straight Stem Cemented titanium 126-150mmSU028 Furlong Modular LOL Stem - cemented Stainless steel 8mm-18mm
standard
Taylor Bryant Pty LtdTB009 Lyderic II Monotige Femoral Stem HA - Titanium alloy - Cemented - Sizes 6 - 11
Stainless steel
TB067 Groupe Lepine Total Hip Replacement Lyderic II Modular Stem Size 6, 7, 9, 9, 10, 11
PART A - Prostheses List by Category, Groups and Sponsor Page 231 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI023 Zimmer Hip Systems Femoral Stem Heritage - Cobalt Chrome 11 - 17 Also grouped in Hip
Group 4a
ZI373 MS-30 Hip prosthesis Cemented Stem:MS-30 (Protek) - metal 6 to 16
Group 2b - Cemented, polished, no pre-coat, tapered, short or standard length, all
Advanced Surgical TechnologiesAD130 WMT Perfecta Hip System Cemented CoCr 10.5, 12, 13.5, 15, 16.5, 18mm width, Also grouped in Hip
140 - 170 long Group 3b
B Braun Australia Pty LtdBB049 Down Asiana Hip System Cemented Stem Size 40-45BB240 BiContact cemented Femoral stem 8-18 Also grouped in Hip
Group 4a
Biomet Australia Pty LtdBI696 Olympia Stem Anatomic design CO CR femoral stem L & R 6 sizes (1 to 6)
Corin Australia Pty LtdCR024 Taper Fit Hip System Double taper stainless steel total hip sizes 1-4CR025 Cenator Total Hip System Femoral stem CoCr Stems ex-narrow, narrow, std & large
Cups heads 22,26,28mm OD40-52mm
CR026 Cenator Total Hip System Femoral stem polished Co cr Stems ex-narrow, narrow,std & large Cups heads22,26,28mm OD40-52mm
CR076 Oxford Universal Hip System Proximal femoral stem CoCr Extra small to Large Also grouped in Hip Group 4a, 6h, 8h
CR077 Oxford Universal Hip System Proximal femoral stem Cocr -HAP coated Extra small to Large Also grouped in Hip Group 4a, 6h, 8h
CR078 Oxford Universal Hip System Distal femoral stem Cocr 10mm-20mm diameter,120-150mm Also grouped in Hip Group 6h
CR082 Oxford Hip System Distal Stem Revision 250mm 60mm Split, Diameter 12 - 20mm Also grouped in Hip Group 6h
De Puy AustraliaDP546 C- Stem Standard or High Offset or CDH Ortron Size 1-8 or size 2-5 or CDH
Global Manufacturing Technology Pty LimitedGM038 Edinburgh Total Hip System (Hip Stem) Femoral stem cemented CoCr CDH to Size 4 Narrow: Size 1 to Size 4
Standard
PART A - Prostheses List by Category, Groups and Sponsor Page 232 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Scientific Pty LtdGS162 PLUS Hip Joint Prostheses System CPS-PLUS Stem 1 to 5
Howmedica IncorporatedHW041 Exeter Hip System Stem: Standard - Orthinox Stem Sizes 0-6, Offsets 35 - 5, 37 - 5, Also grouped in Hip
44, 50mm Group 28
Orthotech Pty LtdOH100 Lima Total Hip Replacement System Friendly Stem Cemented Hip 0, 1, 2, 3OH199 Lima Accent Hip System Total Hip Replacement 1 -6
Smith & Nephew Surgical Pty LtdSN268 CPCS Femoral Stem Polished Non Porous, Std 1 - 5
and High Offset
SN362 Matrix: Modular Hip System Femoral Stem Polished CoCr 6L-14L
Stryker Australia Pty LtdSK196 Exeter Hip System - ETS (endoprosthesis Orthinox Stainless Steel Endoprosthesis 40mm Offset body with monoblock head
trauma stem) sizes 38mm, 40mm, 41mm, 42mm, 43mm, 44mm, 45mm, 46mm, 47mm, 48mm, 49mm, 50mm, 52mm, 54mm,
SK320 Exeter Cement in Cement Revision Stem Stainless Steel, V40 trunnion, 125mm 44mm Offset, 125mm LengthLength, 44mm Offset
ZimmerZI009 Zimmer Hip Systems Femoral Stem CPT Zimaloy - Co Cr Sizes 1 - 5 Also grouped in Hip
Group 4a
ZI010 Zimmer Hip Systems Femoral Stem CPT Zimtron - Stainless Steel Sizes 1 - 5ZI449 Revitan Hip Stem Cemented and cementless 7 - 16, with different offsets Also grouped in Hip
Group 4a, 5a, 7a
Radiographic SuffixStryker Australia Pty Ltd
SK322 Exeter Std Length RSA Stems Orthinox Stainless Steel with Tantalum Offsets ranging from 35.5, 37.5, 44 and RSA markers 50mm in standard lengths
Group 3a - Cemented, unpolished, pre-coat, straight, short or standard length, all
Advanced Surgical TechnologiesAD231 Profemur Total Hip System Titanium tapered Splined Straight Stem Length 135mm, Diameter 10-22mm
PART A - Prostheses List by Category, Groups and Sponsor Page 233 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW031 Definition PM Femoral Component Femoral Stem - Vitallium Stem sizes 1 - 7 Also grouped in Hip
Group 3b
Group 3b - Cemented, unpolished, pre-coat, tapered, short or standard length, all
De Puy AustraliaDY167 G2 Hip System G2 Stem Cemented 1 - 11L
Orthotech Pty LtdOH101 Lima Total Hip Replacement System H-MOOS Cemented Hip 1 - 5
Group 4a - Cemented, polished and unpolished, long length, conventional.
B Braun Australia Pty LtdBB032 BI-CONTACT HIP SYSTEM Stem Revision 13-19 Also grouped in Hip
Group 7g
BB033 BI-CONTACT HIP SYSTEM Stem Revision Curved 15-19 Also grouped in Hip Group 7g
Biomet Australia Pty LtdBI029 Scientific Hip Prostheses System Femoral Component, Chrome Cobalt, 6 sizes, 0-6
Cemented
BI037 Rx90 Hip System Revision Femoral Stem 200mm, Chrome 13-19mmCobalt, Cemented
Corin Australia Pty LtdCR023 Freeman -Morgan Stem, Special Ti - Mod Ti Alloy 12-22mm
Smooth
CR083 Oxford Hip System Distal Stem Revision 300mm 60mm Split, Diameter 12-20mm Also grouped in Hip Group 8h
De Puy AustraliaDP012 Wroblewski Resection Stem Collar - 2.0cm - 10.0cmDP013 Wroblewski Resection Stem Stainless steel 200mm, 250mmDP175 Charnley Hip System Orton stems or Tumor or Revision or 10" or 12" or 15" stem or Longstem 40 or
EH40 or FL 40 or Resection, LG. NK 1& 2, or 1 & 2 EH, Longstem LG. NK 1
DP205 Elite Modular Hip System Stem Ortron Custom size
PART A - Prostheses List by Category, Groups and Sponsor Page 234 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP212 Elite Modular Hip System Elite Plus Stem Revision Ortron 4-8 length 190 - 250mm or STD or Long Neck
DP223 Thackray Hip System Acetabular Mesh Ortron 90 One size onlyDP550 C- Stem Revision Stem Ortron Size 4-8 x 200-240 mm length
Global Scientific Pty LtdGS163 PLUS Hip Joint Prostheses System CPS-PLUS Rev Stem 1 to 5
Howmedica IncorporatedHW040 Exeter Hip System Long Stem - Orthinox Stem Lengths 205
Link Orthopaedic AustraliaLO015 LINK Lubinus SP Hip Prosthesis Stem Left & right 01-5
Smith & Nephew Surgical Pty LtdSN274 Echelon Revision hip stem - Non Porous: Standard 12-16 175-225mm
Collar
Stryker Australia Pty LtdST584 Osteonics omnifit cemented long stem Long stem - coated, cobalt chrome Stem sizes 5-11, stem length 200, 250
AND 300mm
ZimmerZI301 CPT Hip System CPT hip stem - extra long Sizes 1 - 4
Radiographic SuffixStryker Australia Pty Ltd
SK321 Exeter Long RSA Stems Orthinox Stainless Steel with Tantalum 44mm Offset in Long Lengths (200mm+)RSA markers
Group 4b - Cemented, calcar replacement, long length.
Biomet Australia Pty LtdBI051 Bi-Metric Hip System Head Neck Revision Femoral Stem, 9-15mm
Chrome Cobalt, Cemented
Smith & Nephew Surgical Pty LtdSN273 Echelon Revision hip stem - Non Porous: Calcar 15 and 30mm 175-235mm Sizes 12-16.
Replacement Collar
SN300 Spectron EF Femoral Revision Stems Non Porous 135mm - 225mmCoCr, Longstem, Neck Replacement, Proximal Third (12/14 and 14/16 taper)
PART A - Prostheses List by Category, Groups and Sponsor Page 235 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI024 Zimmer Hip Systems Femoral Stem VerSys Cemented Revision Stem-Modular One size only
Calcar Block
ZI025 Zimmer Hip Systems Femoral Stem VerSys CRC Cemented Revision Stem- 13 - 19Standard - Cobalt Chrome
Group 5a - Uncemented, Grit Blast, not HA, standard and short, no modularity.
De Puy AustraliaDP119 Solution Implantable Hip System Revision Standard & MMA 8 straight or 6" size 10.5 - 22.5 Also grouped in Hip
bowed Porous coated Group 5c
DY166 G2 Hip System G2 Stem Uncemented 1 - 12L
Link Orthopaedic AustraliaLO107 Beta-Cone Cementless Hip Prosthesis Cementless, Hx coated, Titanium Stem 9 Stem sizes 1-9 plus additional 9 stems Also listed in Hips Table
with XL neck length. Total 18 sizes 5b
Mathys AustraliaMA019 CBC Cementless Stem Titanium femoral stem 5-20mmMA427 CBH Stem Cementless stem for hip arthroplasty 00-12
Smith & Nephew Surgical Pty LtdSN261 Bio-fit Femoral Stem Collarless Collarless Stem size 2-6.SN262 Bio-fit Femoral Stem Collared Collared size 1-6SN360 ITH Femoral Stem Non Porous Titanium Alloy STCOL L120mm- 200mm Stnd
L120mm-200mm
ZimmerZI338 Natural Hip System Femoral Stem Porous, Titanium 140 - 160mmZI375 CLS cementless Hip Prosthesis Uncemented Stems CLS - Ti alloy 5 to 20mm Also grouped in Hip
Group 7a
ZI376 Cone Hip prosthesis Uncemented Stems - Cone - Ti alloy 13 to 24mmZI377 Wagner Revision Hip Prosthesis Uncemented Stem Wagner Revision - Ti 190/14 to 385/25 Also grouped in Hip
Group 7a
ZI397 Variall Screw Cup System Variall Stem - Ti alloy sizes 0 to 11, Also grouped in Hip Group 7a
ZI462 Alloclassic Hip Stem High Offset, Ti alloy, Short Cone, Slender 1 - 14 Neck
PART A - Prostheses List by Category, Groups and Sponsor Page 236 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI463 Alloclassic Hip Stem Zweymuller, Ti alloy, Short Cone, 01, 0, 1, 10-13Slender Neck
ZI468 CLS Cementless Hip Varus Stem, Ti alloy 5 - 20
Group 5b - Uncemented, Grit Blast, HA, Standard and short, no modularity.
Advanced Surgical TechnologiesAD128 WMT Perfecta Hip System Porous titanium 10.5, 12, 12.7, 13.5, 14.2, 15, 16.5, Also grouped in Hip
18mm width, 140 - 175 long Group 5g
B Braun Australia Pty LtdBB029 BI-CONTACT HIP SYSTEM Stem - Cementless Size 10-21 Also grouped in Hip
Group 7b
BB239 BiContact Cementless Femoral stem 8-21 Also grouped in Hips Groups 7b, 5h, 7h
Biomet Australia Pty LtdBI046 Biogroove Femoral Component Femoral Stem, Titanium, Cementless 7-14mm
De Puy AustraliaDP943 Corail Hip System Titanium Stem collar or collarless or Size K9 to K20 or in lengths 130-190mm
Coxa Vara or High offset
DY161 Unirom Total Hip System Femoral Stem Stem Taper 11/13 11-17 mm or 16B sml to 22F XXL Also grouped in Hip Group 5d
Howmedica IncorporatedHW024 ABG11 Hip Stem Prosthesis(Various) ABG ll Femoral Stem - HA coated/Titanium Stem sizes 1 - 8 Left, 1 - 8 Right
Smith & Nephew Surgical Pty LtdSN259 Axis Femoral HA Stem Titanium Alloy 120 - 200mmSN306 Synergy Femoral stem: HA coated Titanium Alloy, 9-20
Std and High Offset
Stryker Australia Pty LtdST573 Omnifit hip stem OMNIFIT - HA titanium - HA coated Stem sizes 4-14
Surgical HouseSU024 Furlong Coned Straight Stem Supravit H-AC cementless 10-18mm
PART A - Prostheses List by Category, Groups and Sponsor Page 237 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5c - Uncemented, beaded, not HA, short and standard lengths, no modularity.
Smith & Nephew Surgical Pty LtdSN270 Echelon Femoral Stem Porous Co Cr, Std and 9 - 19
High Offset
SN305 Synergy Femoral stem Porous Titanium Alloy, Std 9-20 and High Offset
SN366 Matrix: Modular Hip System Stem: Opti-fix plus Titanium Alloy 8S - 16L
ZimmerZI022 Zimmer Hip Systems Femoral Stem VerSys Beaded Fullcoat - Cobalt Chrome 11 - 20 Also grouped in Hip
Group 7c
Group 5d - Uncemented, beaded, HA, short and standard lengths, no modularity.
De Puy AustraliaDP561 IPS HIP Titanium Femoral Hip System Titanium IPS Stem Left and Right Size 1 to 7DY134 Summit Hip System Summit Femoral Stem DUOFIX Coated, Size 1-10
Standard or High Offset
DY423 Proxima Hip System Standard Offset Left/Right Size 1 to 8DY424 Proxima Hip System High Offset Left/Right Size 1 to 8
Howmedica IncorporatedHW051 Meridian ST Stem ST Stem - Vitallium/Porous coated Stem size 0 to 9HW054 Citation Hip AT Stem - Vitallium/Porous coated Stem sizes 0 - 8 Left & Right
Smith & Nephew Surgical Pty LtdSN003 Hydroxylapatite coated Primary Femoral Image Hip Stem, Titanium, left and right Sizes 9 - 18
Stems
SN303 Synergy Femoral Stem HA Coated Porous 9 - 18Titanium Alloy, Std and High offset
SN678 Echelon with HA Cobalt Chromium with Hyrdoxyapetite 11-20Coating
SN751 Synergy Shortened Synergy Stem 1-18SN752 Flat Stem Uncemented Femoral MIS Stem 1 -18
PART A - Prostheses List by Category, Groups and Sponsor Page 238 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5e - Uncemented, mesh, not HA, short and standard lengths, no modularity.
ZimmerZI006 Mayo Hip Titanium Small, medium, large and extra large.ZI016 Zimmer Hip Systems Femoral Stem VerSys Fiber metal - Titanium 9 - 18
Group 5f - Uncemented, mesh, HA, short and standard lengths, no modularity.
ZimmerZI014 Zimmer Hip Systems Femoral Stem Epoch - Titanium 14 - 18 mm Also grouped in Hip
Group 7f
ZI017 Zimmer Hip Systems Femoral Stem VerSys Fiber metal HA/TCP - Titanium 9 - 18
Group 5g - Uncemented, plasma, not HA, short and standard lengths, no modularity.
Biomet Australia Pty LtdBI027 Asian Hip System Femoral Stem, Chrome Cobalt, Cemented 7-13mmBI034 Osteocap RS Hip System Femoral Stem, Titanium, Cementless 9-17mmBI040 Integral Hip System Titanium Alloy, Cementless, Porus Stem, Length from 125mm to 175mm, 9-
3 variations: Standard, Laterised or reduced profile
BI048 Balance Hip System Femoral Stem and Head, Cementless, 7 - 18mmBI049 Bi-Metric Hip System Porous Stem, Titanium, Cementless 7-17mmBI074 Biomet Taperloc Hip System Primary Femoral Stem, Titanium, 7.5mm - 22.5mmBI139 Mallory Head Hip System Femoral Stem, Primary, Titanium 7-19mm x 135 -180mm
ZimmerZI296 VerSys Hip System Femoral Stems Anatomic II stem Sizes 9 - 19 Also grouped in Hip
Group 7a
ZI302 VerSys Hip System Femoral Stems Minimally invasive hip stem Sizes 9 - 19 Also grouped in Hip Group 7a
ZI327 M/L Taper Femoral Stem Cobalt/Chrome, beaded tapered stem 9mm - 18mm in 1mm increments, 10 Also grouped in Hip sizes in all Group 7g
PART A - Prostheses List by Category, Groups and Sponsor Page 239 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5h - Uncemented, plasma, HA, short and standard lengths, no modularity.
Advanced Surgical TechnologiesAD129 WMT Perfecta Hip System HA coated titanium 10.5, 12, 12.7, 13.5, 14.2, 15, 16.5,
18mm width, 140 - 175 long
Biomet Australia Pty LtdBI041 Integral Hip System Titanium Alloy, Cementless, Porus Stem, Length from 180mm to 225mm, 9-20mm
3 variations: Standard, Laterised or reduced profile
BI075 Biomet Taperloc Hip System Femoral Stem, HA, Titanium, 7.5mm - 22.5mmBI100 Bi Hapro Hip System Femoral Stem, Uncemented, Cobalt Size 1 to 8 BI141 Mallory Head Hip System Femoral Stem, Primary, HAP Coated, 7-19mm
Titanium
BI779 CDH Hip System Femoral Stem, porous coated, Ti 8-12 mm Diameter
Corin Australia Pty LtdCR021 Freeman -Morgan Stem - Special Ti - TiAlloy with HAP Coat 14mm-22mm
Dual Coat
CR068 Alpha Cera Fit Hip (Stem) Prostheses 12- Titanium Alloy with Titanium Plasma & 8mm - 22mm Diameters; 128mm - 14 Taper Bonit Coating in the Proximal Area 176mm Lengths; Standard and Proximally
CR069 Alpha Fit Hip (Stem) Prostheses 12-14 Titanium Alloy with Titanium Plasma & 7.5mm - 20mm Diameters; 120mm - Bonit Coating in the Proximal Area 160mm Lengths; Standard, Proximally
Modified, Mini; L43 - L49 Offsets
CR086 Tri-Fit Hip Titanium stem proximally coated with 6, 7.5, 10, 12.5, 15, 17.5 & 20mmtitanium plasma spray and
Howmedica IncorporatedHW055 Citation Hip TMZF - HA Stem - Titanium/HA coated Stem sizes 0 - 8 Left & Right
Stryker Australia Pty LtdST541 Osteonics secur-fit plus hip system Titanium - HA coated 127 Degree Offset Stem sizes 7-14ST574 Osteonics secur-fit HA hip stem SECUR-FIT femoral stem, titanium - HA Stem sizes 4-14
coated
ST575 Osteonics hip prostheses ACCOLADE STEM titanium - HA coated Stems sizes 1-8 127 & 132 degree offset
ST587 Osteonics hip prostheses Restoration stem - 155mm titanium - HA 155mm length - stem sizes 7-12 coated
PART A - Prostheses List by Category, Groups and Sponsor Page 240 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5l - Uncemented, other, HA, short and standard lengths, no modularity.
Howmedica IncorporatedHW053 Meridian PA Hip PA Stem - Vitallium/Periapatite coated Stem size 0 to 9
Mathys AustraliaMA424 GSS-CO Cementless stem for hip arthroplasty Sizes 1-7; Length 145-200mm
ZimmerZI365 Natural Hip System Femoral Stem CSTi / HA / Ti alloy, high 00 to 7
offset
Group 6a - Uncemented, Grit Blast, not HA, standard and short, modularity.
Advanced Surgical TechnologiesAD124 Infinity Modular Hip System Trochanteric module titanium HA and A, B, C, D, E, F Also grouped in Hip
porous coated Group 6b & 6c
AD232 Profemur Total Hip System Titanium EHS-E Stem - without HA 1 Standard - 9 StandardPlasma Spray
AD238 Profemur Total Hip System Titanium Tapered Femoral Stem Standard Length Sizes 1 - 9
De Puy AustraliaDP277 Stability Hip System Stem HA or Porocoat Coated Sm, Lge, XLge size 10A - 18B Also grouped in Hip
Group 6b
DP981 SROM Total Hip System (Titanium) ZT/HA Small / Large /XX Large size 14B-24F Also grouped in Hip Group 6b, 6c, 6d, 8a, 8b, 8c, 8d
DP982 SROM Total Hip System (Titanium) ZTT Cone Small / Large / XX large size 14B-24F Also grouped in Hip Group 6c, 6d, 8a, 8c, 8d
Global Scientific Pty LtdGS156 Prostheses, Joint, Hip, Total SL PLUS & Lateral Stem 1 to 12
Link Orthopaedic AustraliaLO020 Waldemar Link MP Reconstruction Hip Neck Segment Assembly 35-65mm IN 126 & 135 degrees Also grouped in Hip
Prosthesis Group 6b, 8a, 8b
PART A - Prostheses List by Category, Groups and Sponsor Page 241 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LO021 Waldemar Link MP Reconstruction Hip Stem 14 - 25mm x 210, 250, 290 & 330mm; Also grouped in Hip Prosthesis 12 x 160, 180, 210, 250 - MP; 14 x 160, Group 6b, 8a, 8b
180 -MP; 16 x 160, 180 - MP; 18 x 160, 180 - MP; 20 x 160, 180 - MP; 22.5 x 160, 180 -MP; 25 x 160, 180 - MP
LO024 Fixation Screw with Locking Bolt - 38 & 58 mm Also grouped in Hip Group 6b, 8a, 8b
LO025 Neck Segment - 35-65mm IN 126 & 135 degrees Also grouped in Hip Group 6b
LO026 Proximal Spacer Rings - 10mm - 40mm Also grouped in Hip Group 6b, 8a, 8b
Orthotech Pty LtdOH106 Lima Total Hip Replacement System Modular Revision Hip Titanium Stem 14, 16, 18, 20, 22, 24 Also grouped in Hip
(Uncemented) Group 8a
OH107 Lima Total Hip Replacement System Revision Titanium Neck with Locking 50 - 110mm Also grouped in Hip Group 8a
OH201 Lima Modulus Hip System Modular Total Hip Replacement, Titanium Femoral Stem 16mm - 26mm
Stryker Australia Pty LtdST001 Restoration T3 Revision Hip System - Titanium Alloy S,M,L
Proximal Sleeve
ST011 Restoration T3 Revision Hip System - Titanium Alloy S,M,LProximal Body
ZimmerZI379 PFM Hip series Uncemented Stems, PFM Revision (Distal 140 to 260 x 14 to 24 Also grouped in Hip
Section) - Ti alloy Group 8a
Group 6b - Uncemented, Grit Blast, HA, Standard and short, modularity.
Advanced Surgical TechnologiesAD121 Infinity Modular Hip System Distal stem titanium 11 - 22mm in 1mm increments, 135 -
175mm long
AD237 Profemur Total Hip System Anca-fit Femoral Stem with 1/3 proximal 9.5, 11, 12, 13, 14, 15, 16, 17.5, left and HA Plasma Spray
AD278 Profemur Total Hip System Titanium Tapered Stem - HA Plasma Spray Sizes 9 to 18 in 1 mm increments
PART A - Prostheses List by Category, Groups and Sponsor Page 242 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD279 Profemur Total Hip System Titanium Stem with HA Plasma Spray Size 11 with Fixed Neck Standard Offset and High Offset, Standard and Plus Flare. Size 12 to 17 - Standard flare and Plus Flare. Size 18 - Standard Flare only
De Puy AustraliaDP983 SROM Total Hip System (Titanium) ZTT OS/ Under Size SM-XXLG size 14B-24F Also grouped in Hip
Group 6d, 8b, 8d
DP984 SROM Total Hip System (Titanium) Standard NK30 or 36 or 42 or 21CR or 14 x 9 x 130mm to 24 x 19 x 175mm11/13 or 12/14 Taper
Link Orthopaedic AustraliaLO034 CFP Hip Stem A, B, left and right; titanium/ HA Extra small to Extra Large Also grouped in Hip
Group 8b
Orthotech Pty LtdOH097 Lima Total Hip Replacement System F2L Multineck Femoral Stem 1 - 6
Uncemented HAC & Porous Coating
OH098 Lima Total Hip Replacement System F2L Modular Neck - Titanium Short & Long (Straight & Angled)
Portland Orthopaedics (Aust) Pty LtdPD002 Margron Total Contact Hip Replacement Margron Oncology/Revision Module AA6, AA7, AZ6, AZ7, BA6, BA7, BB6, Also grouped in Hip
BB7, CA7, CB7, CC7, YY6, YY7, ZZ6, Group 8bZZ7, Dia 17mm-29mm
PD003 Margron Total Hip Replacement Cobalt Chrome, Primary Modular, Plasma Y+0 to Y+2, Z+0 to Z+2, 1+0 to 1+2, Sprayed, Double Threaded Cone Stem 2+0 to 2+2, 3+0 to 3+2, 4+0 to 4+2, 5+0
to 5+2, 6+0 to 6+2, 7+0 to 7+2 , Dia 17mm - 33mm in 2mm increments
PD004 Margron Total Hip Replacement Cobalt Chrome, Primary Modular, HA Y+0 to Y+2, Z+0 to Z+2, 1+0 to 1+2, Coated, Double Threaded Cone Stem 2+0 to 2+2, 3+0 to 3+2, 4+0 to 4+2, 5+0
to 5+2, 6+0 to 6+2, 7+0 to 7+2 , Dia 17mm-33mm in 2mm increments
PD009 Margron Total Hip Replacement Cobalt Chrome, Revision Modular, HA Size Y+1 to Y+5, Z+1 to Z+5, 1+1 to Also grouped in Hip Coated, Double Threaded Cone Stem 1+5, 2+1 to 2+5, 3+1 to 3+5, 4+1 to Group 8b
4+5, 5+1 to 5+6, 6+1 to 6+6, 7+1 to 7+6, Dia 17mm - 33mm in 2mm
Group 6g - Uncemented, plasma, not HA, short and standard lengths, modularity.
Biomet Australia Pty LtdBI081 Impact Modular Total Hip System Femoral Segment, Diaphyseal, Standard. 10-21mm Also grouped in Hip
Titanium Group 8g
PART A - Prostheses List by Category, Groups and Sponsor Page 243 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI082 Impact Modular Total Hip System Femoral Segment, Metaphyseal. Titanium Size 1-6 x Small/MediumBI087 Impact Modular Total Hip System Femoral Segment, Metaphyseal, Size 3-6, Small/Medium
Uncemented , Titanium
BI126 Modular Calcar Mallory Head Revision Femoral Component, Proximal. Titanium 34, 45, 55 resection levels x size a,b,c,d,e Hip System
Orthotech Pty LtdOH060 Exactech Total Hip System Modular Titanium Revision Hip - 21 - 23mm, S, M, L, XL
Metaphyseal Segment
OH119 Exactech Total Hip System Modular Titanium Revision Hip - 25-27mm, S, M, L, XLMetaphyseal Segment
OH120 Exactech Total Hip System Modular Titanium Revision Hip - 29-31mm, S, M, L, XLMetaphyseal Segment
ZimmerZI324 ZMR XL Revision Stem Modular Revision titanium stem with 16.5 - 25.5mm diameters, 170 - 260mm Also grouped in Hip
enhanced junction lengths Group 8a
Group 6h - Uncemented, plasma, HA, short and standard lengths, modularity.
Advanced Surgical TechnologiesAD234 Profemur Total Hip System Titanium uncemented proximal body - HA X-Small, Small, Standard 1, Standard 2,
Plasma sprayed Standard 3, Standard 4, Large
Biomet Australia Pty LtdBI089 Hap Impact Stem (Various) Femoral Segment, Metaphyseal, HAP Size 3-6, Small/Medium
Coated, Uncemented, Titanium
BI128 Modular Calcar Mallory Head Revision Femoral Component, Proximal, Revision, 34, 45, 55 resection levels x size a,b,c,d,e Hip System HAP Coated. Titanium
BI837 Reach Revision Hip System Modular Reach Proximal Body - Proximal Body #1 - 6Collared/Collarless, CrCo, Ti, HA Coated
Global Orthopaedic TechnologyGO011 UniSyn Hip System a) Stem fluted straight, b) Stem porous a) 10 x 130 to 20 x 170mm, b) 14-20 x
plasma sprayed straight, c) Stem porous 140-170mm, c) 14-18 x 140-160mm, d) plasma sprayed bowed, d) Stem fluted 10-20 x 130-170mm
GO014 UniSyn Hip System a) Neck standard Ti, b) Body standard a) 30-36 x 34-46mm, b) 22-30 x 22-plasma sprayed Ti, c) Body standard Ti 34mm, c) 22-30 x 22-34mm, d) 22-HA coated, d) Body cone Ti plasma
PART A - Prostheses List by Category, Groups and Sponsor Page 244 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GO015 UniSyn Hip System a) Neck calcar Ti, b) Body standard a) 36-55 x 34-46mm, b) 22-30 x 22-plasma sprayed Ti HA body, c) Body 34mm, c) 22-30mmcone Ti HA coated
GO016 UniSyn Hip System a) Body cone Ti plasma sprayed HA a) 22-30mm, b) 22-30mmcoated, b) Body calcar Ti plasma sprayed
GO017 UniSyn Hip System Body calcar Ti HA coated 22-30mmGO018 UniSyn Hip System Body calcar Ti plasma sprayed HA coated 22-30mmGO033 UniSyn Hip System Neck non-standard Ti 24-55mm x 38-50mmGO034 UniSyn Hip System Stem/Body/Monoblock Porous/HA Fluted 0 to 6GO037 Consensus Hip System Femoral Stem Porous/HA Coated CoCr Sizes 6 to 14 Also grouped in Hip
Group 8h
Global Scientific Pty LtdGS157 PLUS Hip Joint Prostheses System SL PLUS Ti/Ha Stem 1 to 12
Orthotech Pty LtdOH160 ESOP HA Esop Femoral Stem Metaphyseal Ti/HA Left and Right Size 5-20
Stryker Australia Pty LtdSK056 Stryker Modular Revision Hip System Milled Proximal Body Titanium Plasma Dia 19-25mm with 2 mill Depths; 27-
29mm with 3 Mill Depths
SK058 Stryker Modular Revision Hip System Porous Distal Stems Titanium Plasma Lengths 165, 205, 255mm, diameter 11-SK060 Stryker Modular Revision Hip System Broached Proximal Body Titanium Plasma 1-8
Spray
SK061 Stryker Modular Hip System Cone Proximal Body Titanium Plasma Dia 19-31mm, Heights +0,+10,+20,+30SK062 Stryker Modular Revision Hip System Calcar Proximal Body Titanium Plasma Diameter 19-29mm, 3 Heights each
Taylor Bryant Pty LtdTB069 Groupe Lepine Total Hip Replacement MBA Stem 1 - 8TB183 Lyderic II HA Modular Stem Forged titanium alloy, double layer coating Size 6-11
Group 6i - Uncemented, unpolished and polished, not HA, short and standard lengths,
Advanced Surgical TechnologiesAD236 Profemur Total Hip System Titanium Femoral Necks Length 27 - 38.5mm; Neutral to
Ante/Retro - Varus Valgus 2
PART A - Prostheses List by Category, Groups and Sponsor Page 245 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthotech Pty LtdOH059 Exactech Total Hip System Modular Titanium Revision Hip - Stem 11 - 21mm x 135-165mmOH061 Exactech Total Hip System Modular Titanium Revision Hip - Neck 32 - 49mm, -5 - +30mm
Segment
OH116 Exactech Total Hip System Modular Titanium Revision Hip - Stem 11-21mm x 200mm
Portland Orthopaedics (Aust) Pty LtdPD005 Margron Total Hip Replacement Neck Module CoCr X, Y, AY, Y+3, Z, AZ, A, B, C, BA, CA, Also grouped in Hip
CB, B+4, C+6, CB+6, Offset - 31mm - Group 8i52mm Vert Height 23mm - 35mm
Group 6j - Uncemented, unpolished and polished, HA, short and standard lengths,
Orthotech Pty LtdOH161 ESOP HA ESOP Femoral Stem Diaphyseal Ti Size 9-15
Group 6k - Uncemented, other, not HA, short and standard lengths, modularity.
Biomet Australia Pty LtdBI015 Reach Revision Hip System Modular Reach Proximal Body - Proximal Body #1-6
Collared/Collarless; Titanium, Chrome
Orthotech Pty LtdOH121 Exactech Total Hip System Modular Titanium Revision Hip - 21-31mm Also grouped in Hip
Metaphyseal Segment - Calcar Group 9
Group 7a - Uncemented, Grit Blast, not HA, long length, no modularity.
Advanced Surgical TechnologiesAD239 Profemur Total Hip System Titanium Tapered Femoral Stem Long Sizes 1 - 9
Biomet Australia Pty LtdBI097 Kent Hip System Femoral Component, Titanium Narrow, Std. Size 6 - 16 hole BI778 PLR Splined Revision Stem Splined Straight Stem, Ti 14-24mm x 270mm
Mathys AustraliaMA428 CBK Revision Stem Uncemented revision stem for hip Dia 14mm-25mm; Lengths 225, 265,
PART A - Prostheses List by Category, Groups and Sponsor Page 246 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 7b - Uncemented, Grit Blast, HA, long length, no modularity.
De Puy AustraliaDY132 Corail Hip System Kar Femoral Stem Size 12 - 20
Global Scientific Pty LtdGS159 PLUS Hip Joint Prostheses System Revision SLR-PLUS Stem 3 to 11
Surgical HouseSU022 Furlong Coned Straight Stem H-AC cementless revision 200mm 10-18mmSU023 Furlong Coned Straight Stem H-AC cementless revision 250mm 10-18mm
Group 7c - Uncemented, beaded, not HA, long length, no modularity.
Smith & Nephew Surgical Pty LtdSN272 Echelon Revision hip stem - Bowed, porous: Left/Right Sizes 11 - 22
Standard Collar
SN276 Echelon Revision hip stem - Straight, porous: 11-22Standard Collar
Group 7d - Uncemented, beaded, HA, long length, no modularity.
De Puy AustraliaDP562 IPS HIP Titanium Femoral Hip System Revision IPS Stem Titanium Size 12 - 20
Group 7g - Uncemented, plasma, not HA, long length, no modularity.
Biomet Australia Pty LtdBI052 Bi-Metric Hip System Revision 200 Stem, Titanium, Cemented 9-17mmBI053 Bi-Metric Hip System Revision 250 Stem, Titanium, Cemented 9-17mmBI054 Bi-Metric Hip System Revision 300mm Femoral Stem, 9-17mm
Titanium, Cemented
BI135 Mallory Head Hip System Femoral Stem, Revision, Titanium 250mm, size 7 to 19mmBI137 Mallory Head Hip System Femoral Stem, Revision, Titanium 300mm, size 7 to 19mmBI692 Reach Revision Hip System Titanium porous coated bowed stem Sizes 13 - 19 (L&R) by 200mm LengthBI693 Reach Revision Hip System Titanium porous coated bowed stem Sizes 13 - 19 (L&R) by 250mm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 247 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI694 Reach Revision Hip System Titanium porous coated straight stem Sizes 13 - 19 by 200mm Length
Group 7h - Uncemented, plasma, HA, long length, no modularity.
Stryker Australia Pty LtdST588 Osteonics hip prostheses Restoration stem - 205mm titanium - HA 205mm length - stem sizes 8-12
coated
ST591 Osteonics hip prostheses Restoration HA long stem titanium - HA 255mm length - stem sizes 8 - 14, left & coated anatomic (left & right)
Group 8a - Uncemented, Grit Blast, not HA, long length, modularity.
Advanced Surgical TechnologiesAD230 Profemur Total Hip System Titanium cemented proximal body X-small, Small, Standard 1, Standard 2,
Standard 3, Standard 4, Large
AD233 Profemur Total Hip System Titanium EHS-E Stem - without HA 1 Plus - 9 PlusPlasma Spray
AD235 Profemur Total Hip System Titanium tapered Splined Bowed Stem Length 135 - 215mm, Diameter 10 - 22mm
De Puy AustraliaDP977 SROM Total Hip System (Titanium) XX-Long, 36 x +21CR or +4 or +8 or 16 x 11 x 300 up to 24 x 19 x 325
right, left or neutral in 11/13 or 14/14
DP978 SROM Total Hip System (Titanium) X-Long 36 or +21CR or +4L or +8L in 16 x 11 x 240 up to 24 x 19 x 275left, right or neutral or 11/13 or 12/14
DP979 SROM Total Hip System (Titanium) Long NK26 or 36 x +21CR or +4L or 14 x 9 x 205 up to 24 x 19 x 230+8L or left right or neutral or 11/13 or
DP980 SROM Total Hip System (Titanium) Stem STD 14 x 09 x 130 NK36mm to 24 x 19 x 175 NK42mm
Global Scientific Pty LtdGS160 PLUS Hip Joint Prostheses System Revision Modular Proximal Stem 1 to 12GS161 PLUS Hip Joint Prostheses System Revision Modular Component 1 to 12
Stryker Australia Pty LtdSK127 Restoration T3 Revision Hip System Composition - Titanium alloy (Ti 6A1 V4) Length 265mm in 14mm-20, 22mm,
24mm dia.; Length 305mm in 14mm-20mm, 22mm, 24mm dia.
ST009 Restoration T3 Revision Hip System - Titanium Alloy 265mmDistal Stem 265mm
PART A - Prostheses List by Category, Groups and Sponsor Page 248 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST012 Restoration T3 Revision Hip System - Titanium Alloy 225mmDistal Stem 225mm
ZimmerZI049 Modular Revision Hip System - Proximal ZMR Taper System - Titanium A - FZI050 Modular Revision Hip System - Distal ZMR Porous System - Titanium 12.5 - 22.5mmZI378 PFM Hip series Uncemented Stem -PFM Revision 55 to 85
(Proximal Section) - Ti/CoCr alloy
Group 8b - Uncemented, Grit Blast, HA, long length, modularity.
De Puy AustraliaDP001 Reef Hip System Stem Wings, Titanium alloy Sizes 1, 2, 3DP005 Reef Hip System Stem Trochanteric Components, 25 or 35mm
Titanium alloy, Collared and Collarless
DP009 Reef Hip System Stem, Titanium alloy Dia 10 - 20mm, Length 225 - 375mmDY018 SROM Total Hip System (Titanium) Special Stem with either 230 to 325 in 12 x 06 x 155mm NK30, 14 x 09 x
Left right Neutral or 11/13 or 12/14 205mm NK36
Smith & Nephew Surgical Pty LtdSN749 Emperion Revision Hip Emperion Revision Hip System 1-25
Group 8c - Uncemented, beaded, not HA, long length, modularity.
Stryker Australia Pty LtdSK022 Modular Revision System Fluted Distal Composition - Titanium Alloy Ti A16 V4 3 lengths 165, 205, 255mm, diameter
with Arc Deposited Plasma Spray Coating 11mm - 26mm
Group 8g - Uncemented, plasma, not HA, long length, modularity.
Biomet Australia Pty LtdBI086 Impact Modular Total Hip System Femoral Segment, Metaphyseal, Revision Size 3-6 Small/Medium
Cemented , Titanium
Group 8h - Uncemented, plasma, HA, long length, modularity.
Biomet Australia Pty LtdBI136 Mallory Head Hip System Femoral Stem, Revision, HAP Coated, 250mm, size 7 to 19mm
Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 249 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI138 Mallory Head Hip System Femoral Stem, Revision, HAP Coated, 300mm, size 7 to 19mmTitanium
Global Manufacturing Technology Pty LimitedGM014 Helios Hip System Revision Hip Uncemented Stem 10 x 120mm to 20 x 280mmGM015 Helios Hip System Revision Neck with Screw 40mm to 80mm
Global Orthopaedic TechnologyGO012 UniSyn Hip System a) Stem fluted straight Ti, b) Stem fluted a) 10-20 x 170-210mm, b) 12-24 x
bowed Ti; c) Stem porous plasma 210mm, c) 14-25 x 180-210mm, d) 14-sprayed straight, d) Stem porous plasma 25 x 210mm, e) 10-25 x 170-210mmsprayed bowed; e) Stem fluted tapered
GO013 UniSyn Hip System a) Stem fluted bowed Ti; b) Stem porous a) 12-24 x 260mm, b) 14-25 x 260mm, plasma sprayed straight, c) Stem porous c) 14-25 x 260mm, d) 10-25 x 260mmplasma sprayed bowed; d) Stem fluted
GO020 UniSyn Hip System a) Stem fluted bowed Ti, b) Stem porous a) 12-24 x 310mm, b) 14-25 x 310mm, plasma sprayed bowed, c) Stem fluted c) 10-25 x 310mm
Global Scientific Pty LtdGS158 PLUS Hip Joint Prostheses System Revision SLR-PLUS Ti Stem 1 to 12
Stryker Australia Pty LtdSK059 Stryker Modular Revision Hip System Titanium Alloy Bowed Conical Distal Restoration Modular bowed conical distal
stem 195mm, 235mm
Taylor Bryant Pty LtdTB061 Groupe Lepine Integra Revision Stem 160mm/200mm/240mm/280mm in 11,
13, 15 dia.
TB072 Groupe Lepine Total Hip Replacement Integra Proximal Segment 28/40/60/80/100/120mm
Group 8i - Uncemented, unpolished and polished, not HA, long length, modularity.
Orthotech Pty LtdOH117 Exactech Total Hip System Modular Titanium Revision Hip - Stem 11-21mm x 250mmOH118 Exactech Total Hip System Modular Titanium Revision Hip - Stem 11-21mm x 300mm
Group 9 - Uncemented, Long stem, Special feature - Calcar Replacement
Biomet Australia Pty LtdBI072 Modular Calcar Mallory Head Revision STS Distal Femoral Component, Titanium 14mm to 20mm
Hip System
PART A - Prostheses List by Category, Groups and Sponsor Page 250 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI118 Mallory Head Hip System Femoral Stem, Calcar, Titanium 220mm, Size 9-19mmBI119 Mallory Head Hip System Femoral Stem, Calcar, Titanium 260mm, Size 9-19mmBI120 Mallory Head Hip System Femoral Stem, Calcar, HAP Coated, 220mm, Size 9-19mmBI121 Mallory Head Hip System Femoral Stem, Calcar, HAP Coated, 260mm, Size 9-19mmBI127 Modular Calcar Mallory Head Revision Femoral Component, Distal. Titanium 170-300mm
Hip System
De Puy AustraliaDP121 Solution Implantable Hip System Revision straight or bowed & Calcar or 10" size 13.5 - 22.5
10" both left and right
DY007 SROM Total Hip System (Titanium) STD or Long or X-Long or XX-Long 26 x 21 x 175 or 230 or 275 or 325mm NK26 or 36 x +21CR or +4L or +8L left, right or neutral in 11/13 or 12/14 Taper
Smith & Nephew Surgical Pty LtdSN271 Echelon Revision hip stem - Bowed, porous: Left/Right, 15 and 30mm, Sizes 11-22
Calcar Replacement Collar
SN275 Echelon Revision hip stem - Straight, porous: 15, 30mm, Sizes 11-22Calcar Replacement Collar
Stryker Australia Pty LtdST589 Osteonics hip prostheses Restoration cacar replacement stem 205mm length - stem sizes 8-14
15mm titanium - HA coated
Hip - Femoral HeadsGroup 12 - Bipolar/Multipolar
Advanced Surgical TechnologiesAD269 SLR Bipolar Endoprosthesis SLR Bipolar Taper Femoral Head Cast 22.5mm - 32mm Femoral Head and neck
Cobalt Chrome Alloy ranging from -3.5mm to +7mm
AD270 SLR Biploar Acetabular Shell Cast Cobalt Chrome Alloy 38mm - 65mm in millimetre incrementsAD271 SLR Bipolar Acetabular Liners UHMWPE 22mm - 32mm ID, ranging from 38mm
to 65mm
B Braun Australia Pty LtdBB037 BI-CONTACT HIP SYSTEM Bipolar Cup Dia 39-55mmBB249 Bipolar Head Hemi Arthroplasty Head 38 - 60mm
PART A - Prostheses List by Category, Groups and Sponsor Page 251 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Biomet Australia Pty LtdBI096 Tripolar Acetabular Cup Series Ringloc Series, UHMWPE, Chrome Cobalt 24-28mm Also grouped in Hip
Group 19k
BI129 Mallory Head Hip System Acetabular Cup, UHMWPE 40-80mm
De Puy AustraliaDP171 Hastings HIP Head Size 36 - 56DY160 Ultima Monk Bi-Articular Head 42 - 56mm
Global Manufacturing Technology Pty LimitedGM021 Classic Marathon (Acetabular Bi-Polar 40mm to 54mm
Global Scientific Pty LtdGS185 PLUS Hip Joint Prostheses System Unipolar Head 38-60GS186 PLUS Hip Joint Prostheses System Bipolar Head 39mm-60mm
Link Orthopaedic AustraliaLO036 Vario Cup - 44-65mm
Mathys AustraliaMA025 Bipolar Head Bipolar prosthesis head Dia 28mm
Orthotech Pty LtdOH103 Lima Total Hip Replacement System Heads - Bi-Polar and Fixed 22, 28, 32mm
Smith & Nephew Surgical Pty LtdSN256 Axis Ceramic Femoral Head AlO3 12/14Taper 22 - 36mm Also grouped in Hip
Group 13c, 14c
SN266 Convene Bi-polar Liner 28 - 32mm Also grouped in Hip Group 20b
SN267 Convene Bi-polar Metal Shell 43 - 64mmSN711 Tandem Shell/Liner UHMWPE 22-32mm
Stryker Australia Pty LtdST014 Hip - Head - Bipolar Crosslinked Enhanced Polyethylene/ Cobalt Chrome 40-72mm Outer DiameterST566 Osteonics hip prostheses Bipolar head, cobalt chrome with ID 22, 26, 28, 32mm dia
polyethylene insert (factory Assembled)
Surgical HouseSU025 Furlong Femoral Head Bi-polar cobalt chrome 40-58mm head
PART A - Prostheses List by Category, Groups and Sponsor Page 252 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Taylor Bryant Pty LtdTB064 Groupe Lepine Bipolar Heads 42 - 60mm in 1mm increments
ZimmerZI286 Zimmer Acetabular Cup Multipolar (Bipolar) Cup-Co Chr Outer Diameter 38 - 72mm, Inner
W/WHMWPE Diameter 22,28, or 32mm
ZI369 Bipolar Femoral Ballhead Ballhead - CoCr alloy/ PE 26/42 to 26/60
Group 13a - Conventional Femoral Head, ≤32mm, Stainless steel
Corin Australia Pty LtdCR045 Femoral Head Stainless Steel Modular Femoral Head Dia 22, 26, 28 & 32mm, Short, Std,
Long & Extra Long Neck Length
De Puy AustraliaDP124 Solution Implantable Hip System CoCr Femoral Head Various Tapers & 22 or 26 or 28 or 32 mm size Also grouped in Hip
Neck Lengths Group 13b
Global Scientific Pty LtdGS182 PLUS Hip Joint Prostheses System Fem Head Metal S-XXL Also grouped in Hip
Group 13b
Howmedica IncorporatedHW038 Exeter Hip System Metal Head - Orthinox 22, 26, 28, 30, 32mm Diameter Also grouped in Hip
Group 14a
Mathys AustraliaMA028 Metal Heads Hip Prosthesis Head Cone 12/14 dia 28mm-58mm Also grouped in Hip
Group 14a
Smith & Nephew Surgical Pty LtdSN697 Femoral Head Stainless steel 22-36mm,+0-+16mm Also grouped in Hip
Group 14a
Taylor Bryant Pty LtdTB065 Groupe Lepine Total Hip Replacement Stainless Steel Head .-5mm/0mm/+5mm/ +10mm
ZimmerZI052 Femoral Head Zimtron - Stainless Steel 22 - 32mm Also grouped in Hip
Group 14a
PART A - Prostheses List by Category, Groups and Sponsor Page 253 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 13b - Conventional Femoral Head, ≤32mm, Cobalt Chrome
Advanced Surgical TechnologiesAD114 Transcend Articulation System Metal femoral head CoCr 28 and 32mm, 4 lengths Also grouped in Hip
Group 14b
AD123 Infinity Modular Hip System Head CoCr 28mm, 32mm, 3 lengths
B Braun Australia Pty LtdBB034 BI-CONTACT HIP SYSTEM Isodur Head CoCr Dia 22.2-32mm, short-xxlongBB246 Isodur C Head Hip Prosthesis Head 22.2mm - 54mm diameters, short, Also grouped in Hips
standard, long, X-long and XX-long Group 14b
Biomet Australia Pty LtdBI045 Scientific Hip Prostheses System Head, Chrome Cobalt 28mm, -6mm to +12mmBI068 Stanmore Total Hip System Modular Head, Chrome Cobalt 28mm, -6mm to +12mmBI070 Biomet Taperloc Hip System Modular Head, Chrome Cobalt 28mm, -6 to +12mmBI094 Mallory Head Hip System Femoral Head, Offset, Chrome Cobalt 28,32mmBI134 Mallory Head Hip System Femoral Modular Head, Chrome Cobalt 28 to 38mm -6 to +12mm Also grouped in Hip
Group 14b
Corin Australia Pty LtdCR029 Femoral Head 28mm CoCr modular femoral 22,26,28,32mmCR066 Ball Heads 12 - 14 Taper (Endocast) Forged Metal (Endocast SL) 28mm x Small; 28mm x Medium; 28mm
x Large; 28mm x XLarge; 28mm x XXLarge; 28mm x XXXLarge
De Puy AustraliaDP549 C- Stem C-Stem Heads Ortron Size -3 to +8 Also grouped in Hip
Group 14b
DP988 SROM Total Hip System (Titanium) Unipolar 38-66mm Also grouped in Hip Group 14b, 15
Global Manufacturing Technology Pty LimitedGM008 Edinburgh Total Hip System (Hip Stem) Femoral Head CoCr 28mm
Global Orthopaedic TechnologyGO009 Consensus Hip System Femoral head CoCr 22-32mm
PART A - Prostheses List by Category, Groups and Sponsor Page 254 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW018 ABG Hip System ABG1 Metal femoral head - Francobal 22mm,28mm,32mm DiaHW027 Contemporary Hip System Range Femoral Head. Vitallium 22, 26, 28, 32mmHW032 V40 Femoral Head V40 Head - Metal - Cobalt Chrome, 22, 26, 28, 30, 32
Vitallium
HW058 PCA Hip System Femoral Head - Vitallium 22mm,26mm,28mm, 32mm DiaHW059 PCA Hip System Revision (+15mm) Head - Vitallium 26mm,28mm,32mm Dia
Link Orthopaedic AustraliaLO022 Link Prosthesis Head Head:Chrome Cobalt Short, medium-short, medium & large
Orthotech Pty LtdOH062 Acumatch M-Series Total Hip System Modular Titanium Revision Hip - Cobalt -2 to -5mm, +0 to 10mm
Chrome Head
OH125 Lima Total Hip Replacement System CRCO Femoral Head S, M, L, XL, XXLOH162 ESOP HA Femoral Head CoCr 22.2 -32mm
Portland Orthopaedics (Aust) Pty LtdPD001 Margron Femoral Head CoCr Alloy Dia 26mm, 28mm, 32mm, 36mm Length Also grouped in Hip
-3.5mm, 0mm, +3.5mm, +7mm Group 14b
Smith & Nephew Surgical Pty LtdSN280 Femoral Head Co Cr 14/16 taper, 22-32mm, Short -XXXLong Also grouped in Hip
Neck Group 14b
SN281 Femoral Head Co Cr, 12/14Taper 22 - 36mm Also grouped in Hip Group 14b
SN686 Femoral Head CoCr, 14/16 taper 22mm Also grouped in Hip Group 14b
Stryker Australia Pty LtdST567 Osteonics hip prostheses Femoral head, cobalt chrome 22, 26, 28, 32mm diaST568 Osteonics hip prostheses Femoral head - LFIT cobalt chrome low 22, 26, 28, 32mm dia Also grouped in Hip
friction ion treatment Group 13f, 14b, 14f
ST598 Peritia Metal head cobalt chrome 12-14 and 14- 28 & 32mm dia16 taper
Surgical HouseSU027 Furlong Femoral Head Metallic, cobalt chrome or stainless steel Short, medium, long, extra long
PART A - Prostheses List by Category, Groups and Sponsor Page 255 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI051 Femoral Head Zimaloy - Co Cr 22 - 32mm Also grouped in Hip
Group 14b
ZI348 Head - Femoral Cobalt Chrome 22mmZI358 Durasul Ballhead for Inserts Femoral Metal Ball Head - CoCr alloy 22, 28, 32ZI362 Natural Hip System Eccentric Ball Heads - CoCr alloy 28/14 (S,M,L)ZI364 Natural Hip System Femoral Head Chrome Cobalt alloy 22 to 32mmZI380 Femoral Head Head - Metal (zweymuller Allopro) - 22 to 38mm Also grouped in Hip
CoCr alloy Group 14b
Group 13c - Conventional Femoral Head, ≤32mm, Alumina
Advanced Surgical TechnologiesAD115 Transcend Articulation System Ceramic femoral head 28 and 32mm, 3 lengthsAD122 Infinity Modular Hip System Head ceramic 28mm, 32mm, 3 lengths Also grouped in Hip
Group 14c
B Braun Australia Pty LtdBB250 Ceramic Head Biolox forte 26 - 32mm diameters, short, standard and
Corin Australia Pty LtdCR065 Ball Heads 12 - 14 Taper (Alumina) Alumina Ball Head (28mm) 28mm x Small; 28mm x Medium; 28mm
x Large; 28mm x XLarge; 28mm x XXLarge; 28mm x XXXLarge
De Puy AustraliaDP249 AML Modular Heads Ceramic Head Various Tapers & Neck 22 or 26 or 28 or 32 or 36mm Also grouped in Hip
Lengths Group 14c
Global Manufacturing Technology Pty LimitedGM019 Edinburgh Total Hip System (Hip Stem) Femoral Head Biolox Ceramic 28mm
Global Scientific Pty LtdGS183 PLUS Hip Joint Prostheses System Fem Head Ceramic S,M,L
Howmedica IncorporatedHW017 V40 Ceramic Head Ceramic Femoral Head - Alumina ceramic 28mm,32mm,36mm Dia Also grouped in Hip
Group 14c
Link Orthopaedic AustraliaLO023 Link Prosthesis Head Biolox Ceramic Short, medium-short & large
PART A - Prostheses List by Category, Groups and Sponsor Page 256 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mathys AustraliaMA020 Ceramic Head Ceramic Cone 12/14 - dia 28mm-32mm
Orthotech Pty LtdOH093 Lima Total Hip Replacement System Ceramic/Femoral Head (Biolox Forte) Small, Medium, Large Also grouped in Hip
Group 14c
OH137 Acumatch M-Series Total Hip System - Modular Titanium Revision Hip - Ceramic -2 to -5mm, +0 to +10mm Head
OH163 ESOP HA Femoral Head Alumina Ceramic 28mm Diameter
Portland Orthopaedics (Aust) Pty LtdPD006 Margron Total Hip Replacement Femoral Head (Ceramic) Dia 26mm, 28mm, 32mm, 36mm Length
-3.5mm, 0mm, +3.5mm
Smith & Nephew Surgical Pty LtdSN278 Femoral Head Ceramic AlO3 14/16 taper, 28 and 32mm, Std - Xlong Also grouped in Hip
Group 14c
SN299 Reflection Head Ceramic, AlO3 28-36mm Also grouped in Hip Group 14c
Stryker Australia Pty LtdSK011 PCA Revision Femoral Head Composition - Alumina Ceramic with 32mm OD with a std, +5mm neck length Also grouped in Hip
preassembled titanium sleeve options Group 13f
SK012 Osteonics Hip Prostheses C-taper Alumina Ceramic Head 28,32,35mm Diameter Also grouped in Hip Group 14c
ST928 ABG 1 Revision Femoral Head Composition - Alumina ceramic with pre 32mm with OD with a std (0mm) Also grouped in Hip assembled titanium sleeve #465700 and (+5mm) #465703 neck Group 13f
Surgical HouseSU026 Furlong Femoral Head Ceramic 28 & 32mm short, medium, long
Taylor Bryant Pty LtdTB220 10/12/14 Alumina Head BOTA Alumina Head 28mm (-3.5mm, 0mm, +3.5mm); 32mm
(-4mm, 0mm, +4mm)
ZimmerZI055 Femoral Head Trilogy AB Ceramic Head 12/14 Taper 28 - 32mm
(Alumina)
ZI346 Ceramic Femoral head for hip prosthesis Femoral Head - Biolox Ceramic 28 to 32mmZI355 Cerasul - Ceramic Ceramic Femoral Head 28mm ZI381 Ceramic Head - Sulox Head - Ceramic 22 to 32mm
PART A - Prostheses List by Category, Groups and Sponsor Page 257 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 13d - Conventional Femoral Head, ≤32mm, Titanium Alloy
Corin Australia Pty LtdCR064 Ball Heads 12 - 24 Taper (Tin Coated) Tin Coated (Titanium Nitride) 28mm x Small; 28mm x Medium; 28mm
x Large; 28mm x XLarge; 28mm x XXLarge; 28mm x XXXLarge
Group 13e - Conventional Femoral Head, ≤32mm, Non-alloy
Smith & Nephew Surgical Pty LtdSN687 Femoral Head 12/14, 14/16 Taper, Oxinium 22 - 36mm, -3 - +16mm Also grouped in Hip
Group 14e
Group 13f - Conventional Femoral Head, ≤32mm, Other
Biomet Australia Pty LtdBI058 Modular Ceramic System Ceramic Head 28-32mm -6mm to +12mm Also grouped in Hip
Group 13g
Global Orthopaedic TechnologyGO010 Consensus Hip System Femoral head Biolox ceramic 28-32mm
Group 13g - Conventional Femoral Head, ≤32mm, Zirconium
Corin Australia Pty LtdCR028 Femoral Head 28mm Zirconia ceramic 22,26,28,32mmCR067 (ZrOz) Ball Heads 12 - 14 Taper (Zirconia) Zirconia (ZrOz) Ball Head 28mm 28mm x Small; 28mm x Medium; 28mm
x Large; 28mm x XLarge; 28mm x XXLarge; 28mm x XXXLarge
Smith & Nephew Surgical Pty LtdSN279 Femoral Head Ceramic Zirconium Head- standard - Xlong. 12/14 Taper Also grouped in Hip
Head 28 mm, 32mm , +0, +4, +8mm. Group 14g
Group 14b - Conventional Femoral Head, >32mm, Cobalt Chrome
Advanced Surgical TechnologiesAD212 CONSERVE Femoral Surface CoCr SLT Taper Femoral Head Sizes 38mm-54mm in 2mm increments, -
3.5 to +3.5 Neck
PART A - Prostheses List by Category, Groups and Sponsor Page 258 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Biomet Australia Pty LtdBI061 Austin Moore Self Locking Hip Prosthesis Modular Femoral Stem and Modular 38-61mm Head, Std or Narrow stem
System Head, Titanium.
BI875 Endo II Head Modular Head - CoCr 41 mm through 61mmBI876 Endo II Head Modular Head Taper Insert - CoCr -6mm to +6mmBI877 Freedom 36 mm Modular Head Modular Head 36mm, -6mm to +9mmBI895 M2A Magnum Prosthesis Taper Insert, Cobalt chrome 42 - 50mm, -6, -3, STD, +3, +6, +9; 52 -
60mm, -6, -3, STD, 3, +6, +9
Corin Australia Pty LtdCR084 Modular Endo Heads Modular Endo Head is made of Cobalt 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,
Chrome 52, 53, 54, 55, 56, 58, & 60mm
De Puy AustraliaDY025 Unirom Total Hip System Femoral Stem PFC / Ultima Taper 10/12 CoCr Head Size -3 to +6DY402 ASR Hip System Modular Cathcart Unipolar Head 41 to 60mm
Global Orthopaedic TechnologyGO043 Consensus Hip System Femoral head - Modular CoCr 38-58mmGO046 Consensus Hip System Femoral Head Cemented CoCr 38-58mm
Smith & Nephew Surgical Pty LtdSN308 Unipolar Head Co Cr 12/14 42 - 61mm
Stryker Australia Pty LtdST929 V40 LFIT CoCr Femoral Heads Composition - Ion Implanted V40 Dia 22mm: Std (0), +3mm, +8mm neck
Chrome Cobalt Heads lengths. Dia 26mm: -3mm, Std (0), +4mm, +8mm, +12mm, +16mm neck lengths. Dia 28mm: -4mm, Std (0), +4mm, +6mm, +8mm, +12mm, +16mm. 32mm: -4mm, Std (0), +4mm, +8mm,
ZimmerZI359 Durasul Ballhead for Inserts Femoral Metal Ball Head - CoCr alloy 34 - 38mmZI363 Natural Hip System Femoral Head - CoCr alloy 32 to 40mm
PART A - Prostheses List by Category, Groups and Sponsor Page 259 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 14f - Conventional Femoral Head, >32mm, Other
Surgical HouseSU154 ACCIS Head Solid femoral head. Composition: Diam 38, 42, 46, 50mm
Chrome cobalt alloy (CrCoMo) base metal, coated with Titanium Niobium
Group 15 - All metal on metal articulated heads
Biomet Australia Pty LtdBI056 Biomet Alternate Bearing Surface Metal on Metal head, Chrome Cobalt 28mm -6mm to +12mmBI782 M2a Modular Head Component & Metal on Metal Head, Chrome Cobalt 38 - 60mm, -6 mm to +12mm
Acetabular Cup
BI896 M2A Magnum Prosthesis Femoral Modular Head, Cobalt Chrome 38, 40, 42, 44, 46, 48, 50,52, 54, 56, 58, 60mm
Corin Australia Pty LtdCR016 Cormet 2000 - Modular Endo Head CoCr alloy Short 40mm - Long 56mmCR020 Metalok Femoral Head Carbon Cobalt Chrome Alloy Head 28mm (short/med/long neck)
De Puy AustraliaDY215 Pinnacle Cup/Liners CoCr "M" Femoral Heads Various Tapers 28 or 36 mm
and Neck Lengths
Global Scientific Pty LtdGS184 PLUS Hip Joint Prostheses System Fem Head Plusmet S-XXL
Mathys AustraliaMA029 Metal on Metal Head Head for MOM articulation 28mm
ZimmerZI382 Femoral Head Head - Metasul - special metal alloy 28 to 40mm alloyZI453 Natural Hip System - Femoral Ballhead Metasul Femoral Head, special metasul 42-44mm
Group 16a - Resurfacing, Metal, Cemented
Advanced Surgical TechnologiesAD112 Conserve Hip Resurfacing Hemi Cobalt chrome 32 - 66mm in 2mm increments
PART A - Prostheses List by Category, Groups and Sponsor Page 260 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD220 CONSERVE PLUS Total Hip Resurfacing CoCr Femoral Head - Super Polished Sizes 36mm - 52mm in 2mm increments System
Biomet Australia Pty LtdBI839 Resurfacing Hip System Femoral Head CoCr, Cemented 38 - 60mm
Corin Australia Pty LtdCR047 Cormet 2000 Resurfacing Hip Resurfacing femoral head Cobalt chrome Dia 40 -56mm
cemented
De Puy AustraliaDY330 ASR Hip System Large Modular Head 38.5-64.5mmDY331 ASR Hip System Resurfacing Femoral Head 38.5-64.5mm
Global Orthopaedic TechnologyGO047 ICON Hip System Femoral Head - Modular CoCr 38-58mmGO049 ICON Hip System Femoral Head Cemented CoCr 38-58mm head
Smith & Nephew Surgical Pty LtdSN741 Birmingham Modular Femoral Head Cobalt Chrome 38 - 58mmSN743 Birmingham Hip Resurfacing Prostheses - Cemented 38 - 58 mm heads
Femoral Component
ZimmerZI466 Bone Save Resurfacing System - Special Femoral A - V
Component, Metasul alloy
ZI472 Durom Resurfacing System - Ballhead Forged CoCr alloy A1 to L1
Group 16b - Resurfacing, Ceramic, Cemented
Stryker Australia Pty LtdSK173 International Hip System Resurfacing hip stem head and cup - Stem
ceramic, PEEK and SS or CoCr
SK174 International Hip System Resurfacing hip stem head and cup - Headceramic, PEEK and SS or CoCr
Group 16c - Resurfacing, Metal, Uncemented
Biomet Australia Pty LtdBI838 Resurfacing Hip System Femoral Head CoCr, Ti, HA Coated 38 - 60mm
PART A - Prostheses List by Category, Groups and Sponsor Page 261 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI840 Resurfacing Hip System Femoral Head CoCr, Ti 38 - 60mm
Corin Australia Pty LtdCR017 Cormet 2000 Resurfacing Hip System Resurfacing femoral head Cobalt chrome Dia 40 - 56mm
HAP coated
Taylor Bryant Pty LtdTB308 HemiCAP Contoured Articular Articular Component - Chrome Cobalt Articular Component 25mm - 3.0mm x $0.00 $0.00
Resurfacing Hip System 3.0mm to 5.0mm x 5.0mm offset; Articular Component 30mm - 5.0mm x 5.0mm to 7.0mm x 7.0mm offset
Group 16d - Resurfacing, Ceramic, Uncemented
Endotec Australia Pty LtdEA005 Buechel-Pappas Integrated Total Hip Femoral Head-Ceramic coated titanium 28mm to 58mm
Replacement System
Group 17 - Item Type - Other
De Puy AustraliaDY026 Elite Hemi Head Elite Plus Hemi Head 42 - 60 mm
Stryker Australia Pty LtdST570 Unipolar head system UNITRAX vitallium alloy and polyethylene 38-64mm OD 2mm increments
ZimmerZI054 Femoral Head Endo Head 38 - 63mmZI347 Femoral Head Femoral Head - Unipolar - CoCr alloy / 42 to 60
Hip - Special Needs GroupGroup 28 - Special Purpose Group
Biomet Australia Pty LtdBI889 Orthopaedic Salvage System Proximal Femoral Component, Letson or 7cm Left or Right
Finn, Anatomic, Ti
Smith & Nephew Surgical Pty LtdSN693 Hip Component Femoral or acetabular Size 0 - 20
PART A - Prostheses List by Category, Groups and Sponsor Page 262 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI405 MOST System - metal alloy / PE Total system
Group 29 - Special Purpose Tumour Products
Link Orthopaedic AustraliaLO009 LINK Saddle Prosthesis Saddle Prosthesis Saddle Component One size onlyLO010 LINK Saddle Prosthesis Saddle Prosthesis Base Component 60 - 160mmLO011 LINK Saddle Prosthesis Saddle Prosthesis Set Screw for Base Component One size onlyLO012 LINK Saddle Prosthesis Saddle Prosthesis Stem 14 - 25mm x 210, 250, 290 & 330mm;
12 x 160, 180, 210, 250 - MP; 14 x 160, 180 - MP; 16 x 160, 180 - MP; 18 x 160, 180 - MP; 20 x 160, 180 - MP; 22.5 x 160, 180 MP; 25 x 160, 180 - MP
LO028 LINK Partial Pelvis Replacement Partial Pelvis Replacement (left/right) 48-67mmLO029 LINK Partial Pelvis Replacement Partial Pelvis Replacement (left/right) 48-67mm
with additional Caudal Flange
LO030 LINK Partial Pelvis Replacement Hook for Obturator Foramen Width 6-12mmLO031 LINK Partial Pelvis Replacement Fixation Screw 20-35mm
Mathys AustraliaMA024 CCE Ring CCE roof reinforcement ring - Dia 46 - 58mm
Orthotech Pty LtdOH091 Lima RPS Femoral System Cemented Revision Stem 280, 330, 380mmOH092 Lima RPS Femoral System Modular Spacer 20 - 144mm
Hooks, Other
Mathys AustraliaMA067 Spinal Plate/Plate System AO/ASIF Spinal Spondylolysis hook screw (complete) Screw 45 - 60mm
Implants small & large
Medtronic Sofamor Danek Australia Pty LtdSD034 CD Horizon Hook - various Small, Medium or Large
PART A - Prostheses List by Category, Groups and Sponsor Page 263 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Hydroxyapatite
Medtronic Sofamor Danek Australia Pty LtdSD043 BCP Biphasic Calcium Phosphate Reabsorbable 1-3cc
Graft Supplement
SD309 BCP Biphasic Calcium Phosphate Reabsorbable 5cc Graft Supplement
SD310 BCP Biphasic Calcium Phosphate Reabsorbable 10cc Graft Supplement
SD311 BCP Biphasic Calcium Phosphate Reabsorbable 20cc Graft Supplement
ZimmerZI192 Bone Graft Substitute Triosite Granules (0.5 - 1.0 mm grain 1 g Tube
sizes)- HATCP
ZI193 Bone Graft Substitute Triosite Granules (2 - 3mm grain size) - 5g TubeHATCP
ZI194 Bone Graft Substitute Triosite Block 5 x 5 x 10mm Box of 4 - 10mmHATCP
ZI195 Bone Graft Substitute Triosite Block 5 x 5 x 20mm Box of 4 - 20mmHATCP
ZI196 Bone Graft Substitute Triosite Block 5 x 5 x 10mm Box of 2 - 10mmHATCP
ZI197 Bone Graft Substitute Triosite Block 5 x 5 x 20mm Box of 2 - 20mmHATCP
ZI198 Bone Graft Substitute Triosite Oesteotomy Wedges - HATCP 6 - 12mm
Immobilizers, Cervical
De Puy AustraliaDY294 Bremer Halo Crown System Aluminium Crown & Vest Standard & 3DDY295 Bremer Halo Crown System Titanium Skull Pins Standard & Hi-Fix
PART A - Prostheses List by Category, Groups and Sponsor Page 264 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Knee - Femoral Component Total ArthroplastyGroup 1a - Cemented, Alloy, Posterior Cruciate Retaining
Advanced Surgical TechnologiesAD141 Advance Total Knee System Femoral CoCr component PCR cemented 1, 2, 3, 4, 5, 6 Also grouped in Knee
Group 1b
AD169 Advantim Total Knee System Femoral Components CoCr Total Small, Medium, Large, Xlarge Also grouped in Knee Condylar (Non Porous Coated) Group 1b
AD219 ADVANCE Total Knee System Stemmed condylar femoral medial pivot 1, 2, 3, 4, 5 All in Left & Right Also grouped in Knee component - nonporous Group 1b
Australian Surgical Design & Manufacture Pty LtdAE039 Active Knee System Active Knee - Cemented Femoral Sizes 1-5 Left & Right
B Braun Australia Pty LtdBB205 Columbus TKS Femoral component F1 - F7, Left and Right Also grouped in Knee
Group 1b
Biomet Australia Pty LtdBI147 AGC Knee System Femoral Component, Anatomic, Chrome 55-80mm
Cobalt
BI152 AGC Knee System Femoral Component, Universal, Chrome 55-80mmCobalt
BI168 Maxim Complete Knee System Primary Anatomic Femoral, Cemented, 55-80mmChrome Cobalt
BI790 Ascent Total Knee System Femoral, cruciate retaining, anatomic, X-Small to XX-Largecemented, chrome cobalt
BI898 Vanguard Total Knee System Femoral Component, CR, Cemented, 55, 57.5, 60, 62.5, 65, 67.5, 70, 75, 80 anatomic, CoCr. Left and Right
Corin Australia Pty LtdCR013 Rotaglide + Total Knee System, Femoral Pegged, Cemented Ex Sml - Ex Lge Also grouped in Knee
Component Group 1b
CR015 Rotaglide + Total Knee System, Femoral Stemmed, Cemented Ex Sml - Ex Lge Also grouped in Knee Component Group 1b
De Puy AustraliaDP381 AMK Total Knee system Cemented Femoral left and right Size 1-5 Also grouped in Knee
Group 1b
PART A - Prostheses List by Category, Groups and Sponsor Page 265 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW076 Duracon Total Knee System Femoral Component Cemented - Small, Medium, Medium-Large, Large, Also grouped in Knee
Extra-Large Group 1b
HW147 Kinemax Knee Femoral: Condylar Beadless - Vitallium XS, S, M, L, XL, XXL
Mathys AustraliaMA108 Balansys Femoral Component Left & right A - E Also grouped in Knee
Groups 1j, 3h
Orthotech Pty LtdOH020 Optetrak Total Knee System Femoral Component Size 1 - 6 Also grouped in Knee
Groups, 1b, 1j, 1k
OH155 Academia Knee CoCr, Titanium, Femoral, Tibial, Bearing, Femoral Implant 40-55 Also grouped in Knee Stems & Patellar Groups 1b, 1j, 1k
Smith & Nephew Surgical Pty LtdSN321 Genesis II Non Porous femoral Left/Right Size 1-8SN344 Genesis Femoral Component: Cruciate Retaining: Left/Right Small - Magnum
Non Porous: CoCr
Stryker Australia Pty LtdSK324 Triathlon Knee System Cemented femoral component left and Sizes 1 to 8 Also grouped in Knee
right cobalt chrome Group 1b
SK332 NRG Knee System Cemented femoral component left and Sizes 3,4,5,6,7,9,11,13 Also grouped in Knee right cobalt chrome Group 1b
ST023 Scorpio Femoral Component Cemented 3, 5, 7, 9, 11, 13 Also grouped in Knee Group 1b
ST634 Osteonics Knee System Femoral component cemented cobalt 3, 5, 7, 9, 11, 13 Also grouped in Knee Group 1b
ST923 Osteonics Knee Prostheses Scorpio Femoral component - basic. 3, 5, 7, 9, 11, 13 Also grouped in Knee Composition - cobalt chrome Group 1b
ZimmerZI420 Natural Knee Primary Femur - Cemented - CoCr alloy Size 00 to 5
Group 1b - Cemented, Alloy, Posterior Stabilised
Advanced Surgical TechnologiesAD133 Advance Total Knee System Femoral PS components CoCr 1, 2, 3, 4, 5, 6
PART A - Prostheses List by Category, Groups and Sponsor Page 266 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
B Braun Australia Pty LtdBB196 Emotion TKS Femoral Component-posterior stabilized F1 - F7, Left and RightBB206 Columbus TKS Femoral component - posterior stabilized F1 - F7, Left and Right
Biomet Australia Pty LtdBI150 AGC Knee System Femoral Component, Anatomic, Post. 55 to 80mm
Stabilised Chrome Cobalt
BI158 AGC Knee System Femoral Prosthesis, Posterior Stabilised, 55-80mmUniversal. Chrome Cobalt
BI178 Maxim Complete Knee System Femoral Component, Posterior Stabilised 55-80mmAnatomic Chrome Cobalt
BI191 TRAC Knee System Femoral Component, Posterior Stabilised 55-80mm Also grouped in Knee CoCr Groups 3f, 5d
BI195 Oxford Tricompartmental Knee System Femoral Component, Posterior Stabilised, 60-75mm Also grouped in Knee Cemented, CoCr Groups 1k, 1n
BI795 Ascent Total Knee System Femoral, anatomic, posterior stabilised, X-Small to X-Largeopen box, cemented, chrome cobalt
BI799 Ascent Total Knee System Femoral Anatomic, posterior stabilised or X-Small to X-Large Also grouped in Knee constrained, closed box, cemented, Group 1cchrome cobalt
BI897 Vanguard Total Knee System Femoral Component, Posterior Stabilised, 55, 57.5, 60, 62.5, 65, 67.5, 70, 75, 80 Cemented, anatomic, CoCr. Left and Right
BI902 ROCC Knee Prosthesis Femoral Component, cemented, 1-8anatomic, CoCr
De Puy AustraliaDP004 LCS Complete System Femoral Cemented Small - xlargeDP149 PFC Knee System Range PFC Sigma C/S Size 1-6 Also grouped in Knee
Group 5d
DP380 AMK Total Knee system Posterior or Congruency stabilised Size 1-5femoral or STD Femoral post Chrome
DY368 LCS Complete System Modular Femur Cemented CoCr Sml to Lg + Left and Right Also grouped in Knee Group 11
DY404 RPF Cemented Femur Size 1 to 6
Global Orthopaedic TechnologyGO006 RBK Total Knee System - Femoral No coatings 1-5
Component
PART A - Prostheses List by Category, Groups and Sponsor Page 267 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW080 Duracon Total Knee System Monolithic Stabiliser - Vitallium Small, Medium, Medium-Large, Large,
Extra-Large
Link Orthopaedic AustraliaLO037 Gemini MkII Modular Knee Prostheses - Extra-small, small, medium-small, Also grouped in Knee
System medium, large & extra large Groups 1n, 3f, 5b
Smith & Nephew Surgical Pty LtdSN327 Genesis II PS Non Porous femoral Left/Right Size 1-8SN385 Profix PS Non Porous Femoral Component Left/Right Size 2-7SN660 Profix Constrained Femur Cobalt Chromium Left & Right, 2-7
ZimmerZI119 NexGen Knee Femoral Components PS Option - Co Cr A - H (L&R)ZI421 Natural Knee Primary Femur - Cemented P.S. - CoCr Size 00 to 5
Group 1c - Cemented, Alloy, Totally Constrained
Biomet Australia Pty LtdBI175 Maxim Complete Knee System Femoral Component, Constrained , 55-80mm
Porous Chrome Cobalt
BI180 Maxim Complete Knee System Constrained Anatomic Femoral 60-75mmComponent, Anatomic. Chrome Cobalt
De Puy AustraliaDP150 PFC Knee System Range PFC Sigma TC3 Femur Size 1-5
Howmedica IncorporatedHW079 Duracon Total Knee System Femoral Component Stabiliser Small, Medium, Medium-Large, Large, Also grouped in Knee
Constrained - Vitallium Extra-Large Group 11
HW081 Duracon Total Knee System Femoral Component Stabiliser - Vitallium Small, Medium, Medium-Large, Large, Extra-Large
HW149 Kinemax Knee Femoral: Stabilizer Beadless - Vitallium XS, S, M, L, XL, XXL Also grouped in Knee Group 11
Orthotech Pty LtdOH024 Optetrak Total Knee System CCK Femoral Component Size 1 - 6
PART A - Prostheses List by Category, Groups and Sponsor Page 268 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Smith & Nephew Surgical Pty LtdSN315 Genesis II Femoral Component Constrained Co Cr Left & Right size 1-8 Also grouped in Knee
Group 1f
SN374 Profix Femoral Non Porous Left/Right Size 1-8SN380 Profix Non Porous Femoral with Taper Right/Left Size 1-7
Tornier Pty LtdTO008 HLS System Total Knee Prostheses (HLS CoCr, UHMWPE Femeral, Tibial & Tibial 1 (small) -6 (xx-large); thickness: 9, 11, Also grouped in Knee
Insert components 13mm Groups 1o, 3f, 5d
Group 1d - Cemented, Alloy, PMMA coating, Posterior Cruciate Retaining
Global Scientific Pty LtdGS175 PLUS Knee Joint Prostheses System TC-PLUS Solution (Cemented) Fem 2 to 12
ZimmerZI092 Miller Galante II Precoat - Co Cr 1 - 8ZI111 NexGen Knee Femoral Components CR Precoat - Co Cr A - H (L&R)ZI113 NexGen Knee Femoral Components CRA Precoat - Co Cr A - H (L&R)
Group 1e - Cemented, Alloy, PMMA coating, Posterior Stabilised
ZimmerZI063 NexGen Femoral Components Cobalt Chrome Sizes A - G, Left & RightZI069 Insall-Burstein II Femoral Component CCK - Co Cr 54 - 74mmZI070 Insall-Burstein II Femoral Component PSK - Co Cr 54 - 74mmZI117 NexGen Knee Femoral Components PS Precoat - Co Cr A - H (L&R)
Group 1g - Cemented, Non-Alloy, Posterior Cruciate Retaining
Endotec Australia Pty LtdEA007 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented Primary Femoral sizes
Replacement System (Primary and Tibial components with mobile 1-6(inc) Left & RightPolyethelene inserts, all polyethelene patella ceramic coated, titanium backed
PART A - Prostheses List by Category, Groups and Sponsor Page 269 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Smith & Nephew Surgical Pty LtdSN333 Genesis II/Profix Femoral Component, Oxinium 1-9 Also grouped in Knee
Groups 1h, 1i
Group 1h - Cemented, Non-Alloy, Posterior Stabilised
De Puy AustraliaDY371 LCS Complete System PS Femur CoCr Cemented TiNi Sml to Lge Plus Left and RightDY374 LCS Complete System Femoral Cemented TiNi Small - Large Plus Left and Right
Smith & Nephew Surgical Pty LtdSN704 Genesis II / Profix Posterior Stabilised Oxinium Femoral Size 1 - 8
Components
Group 1i - Cemented, Non-Alloy, Totally Constrained
Smith & Nephew Surgical Pty LtdSN736 Genesis II/Profix Constrained Oxinium Femoral Component Size 1 - 9
Group 1j - Uncemented, Alloy, Posterior Cruciate Retaining
Advanced Surgical TechnologiesAD140 Advance Total Knee System Femoral CoCr PCR component porous 1, 2, 3, 4, 5, 6 Also grouped in Knee
and HA Groups 1k, 1m, 1n
AD168 Advantim Total Knee System Femoral Components CoCr Total Small, Medium, Large, Xlarge Also grouped in Knee Condylar (Porous Coated) Group 1k
AD214 ADVANCE Total Knee System Stemmed condylar femoral medial pivot 1, 2, 3, 4, 5, All in left & right Also grouped in Knee component - porous Group 1k
Biomet Australia Pty LtdBI159 AGC Total Knee System Femoral Prostheses, Anatomic, Porous 55-80mm
Coat, CoCr, Ti
BI167 Maxim Complete Knee System Primary Anatomic Femoral, Uncemented, 55-80mm Chrome Cobalt
BI794 Ascent Total Knee System Femoral, cruciate retaining, anatomic, X-Small to XX-Largeuncemented, chrome cobalt, titanium porous coat
BI886 Vanguard Total Knee System Femoral Component, CR, uncemented, 55, 57.5, 60, 62.5, 65, 67.5, 70, 75, 80 anatomic, CoCr, Ti Left and Right
PART A - Prostheses List by Category, Groups and Sponsor Page 270 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Corin Australia Pty LtdCR012 Rotaglide + Total Knee System, Femoral Pegged, Porous Coat Ex Sml - Ex Lge Also grouped in Knee
Component Group 1k
De Puy AustraliaDP148 PFC Knee System Range PFC Sigma C/R porous Size 1-6 Also grouped in Knee
Group 2a
DP237 LCS Total Knee System Femoral Tray Chrome cobalt Sm+ to Lge++
Howmedica IncorporatedHW075 Duracon Total Knee System Femoral Component Cementless - Small, Medium, Medium-Large, Large, Also grouped in Knee
Extra-Large Group 1k
HW146 Kinemax Knee Femoral: Condylar Beaded - Vitallium XS, S, M, L, XL, XXL Also grouped in Knee Group 11
Link Orthopaedic AustraliaLO049 LINK T.A.C.K. Knee Femoral Cementless Extra-small, small, medium & large
Smith & Nephew Surgical Pty LtdSN326 Genesis II Porous femoral Left/Right Size 1-8SN345 Genesis Femoral: Cruciate Retaining: Porous: Left/Right Small - MagnumSN375 Profix Femoral Porous Left/Right Size 1-8 Also grouped in Knee
Group 1k
Stryker Australia Pty LtdSK387 Triathlon Total Knee System Uncemented, porous beaded femoral 1 to 8
component, cruciate retaining, left and right, cobalt chrome
ST033 Scorpio Femoral Component Cementless 3,5,7,9,11,13 Also grouped in Knee Group 1k
ST922 Osteonics Knee Prostheses Scorpio Femoral component - cementless 3, 5, 7, 9, 11, 13 Also grouped in Knee - foam. Composition - cobalt chrome, Group 1k
ZimmerZI090 Miller Galante II Femoral Component: Porous - Co Cr 1 - 8ZI109 NexGen Knee Femoral Components CR Porous - Co Cr A - H (L&R)ZI418 Natural Knee Primary Femur - Porous - Ti/CoCr alloy Size 00 to 5
PART A - Prostheses List by Category, Groups and Sponsor Page 271 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 1k - Uncemented, Alloy, Posterior Stabilised
Advanced Surgical TechnologiesAD186 Ortholoc Modular Total Condylar Femoral components CoCr Posterior Small, Medium, Large, Xlarge
Stabilised (Porous Coated)
Biomet Australia Pty LtdBI165 AGC Total Knee System Femoral Prostheses, Posterior Stabilised, 55-80mm
Uncemented, Chrome Cobalt
BI174 Maxim Complete Knee System Femoral Component, Posterior Stabilised, 55-80mm Porous, Chrome Cobalt
BI192 TRAC Knee System Femoral Component, Porous, Posterior 55-80mm Also grouped in Knee Stabilised CoCr, Ti Group 3l
BI796 Ascent Total Knee System Femoral, anatomic, posterior stabilised, X-Small to X-Largeopen box, uncemented, chrome cobalt, titanium porous coat
BI910 Oxford Tricompartmental Knee System Femoral Component, Posterior Stabilised, 60 - 75mm Porous, CoCr, Ti
De Puy AustraliaDP003 LCS Complete System Femoral Porocoat Small - largeDP268 SROM Knee System Femoral Component XSml -LgeDP518 LCS Universal Knee LCS Ultra Femorals Chrome cobalt Sm - Lge+
Howmedica IncorporatedHW148 Kinemax Knee Femoral: Stabilizer Beaded - Vitallium XS, S, M, L, XL, XXL
Smith & Nephew Surgical Pty LtdSN328 Genesis II PS Porous femoral Left/Right Size 1-8SN386 Profix PS Porous Femoral Component Right/Left Size 2- 7
Stryker Australia Pty LtdSK386 Triathlon Total Knee System Uncemented, porous beaded femoral Sizes 1 to 8
component, posterior stabilized, left and right cobalt chrome
ZimmerZI115 NexGen Knee Femoral Components PS Porous - Co Cr A - H (L&R)ZI419 Natural Knee Primary Femur - Porous P.S. - Ti/CoCr Size 00 to 5
PART A - Prostheses List by Category, Groups and Sponsor Page 272 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 1l - Uncemented, Alloy, Totally Constrained
Smith & Nephew Surgical Pty LtdSN383 Profix Porous Femoral with Taper Right/Left Size 1-7
Group 1m - Uncemented, Alloy, HA coating, Posterior Cruciate Retaining
Advanced Surgical TechnologiesAD194 Ortholoc Advantim HA Porous Coated Femoral components CoCr HA coated Small, Medium, Large, Xlarge Also grouped in Knee
Knee System femoral components Group 1n
AD275 Advance HA Coated Femoral Component HA Coated Femoral Component 1 - 6 Left and Right Also grouped in Knee Group 1n
Australian Surgical Design & Manufacture Pty LtdAE041 Active Knee System Active Knee - Cementless Femoral Sizes 1-5 Left & Right
Component
B Braun Australia Pty LtdBB232 Emotion TKS Femoral Component - Cementless F1 - F8, Left and Right Also grouped in Knee
Group 1n
BB234 Columbus TKS Femoral Component - Cementless F1 - F7, Left and Right Also grouped in Knee Group 1n
Biomet Australia Pty LtdBI185 Maxim Complete Knee System Femoral Component, HA Coated, Chrome 55-80mm
Cobalt
Corin Australia Pty LtdCR011 Rotaglide + Total Knee System, Femoral Pegged, Hap Coat Ex Sml - Ex Lge Also grouped in Knee
Component Group 1n
CR014 Rotaglide + Total Knee System, Femoral Stemmed, HAP Coat Ex Sml - Ex Lge Also grouped in Knee Component Group 1n
Global Orthopaedic TechnologyGO007 RBK Total Knee System - Femoral Porous coating 1-5
Component
Global Scientific Pty LtdGS176 PLUS Knee Joint Prostheses System TC-PLUS Solution (Cementless) Fem 2 to 12 Also grouped in Knee
Groups 3b, 5e, 10
PART A - Prostheses List by Category, Groups and Sponsor Page 273 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW077 Duracon PA Knee System Femoral Component Cementless with PA Small, Medium, Medium-Large, Large, Also grouped in Knee
- Vitallium, with Peri-Apapite coating Extra-Large Group 1n
Link Orthopaedic AustraliaLO054 LINK T.A.C.K. Knee Hydroxyapaptite Coated (Hac): femoral Extra-small, small, medium & large
component
Smith & Nephew Surgical Pty LtdSN332 Genesis II/Profix Femoral Component HA Coated Co Cr 1-8
Stryker Australia Pty LtdSK325 Triathlon Knee System HA Coated femoral component left and Sizes 1 to 8 Also grouped in Knee
right cobalt chrome Group 1n
SK334 NRG Knee System HA coated femoral component left and Sizes 3,4,5,6,7,9,11,13 Also grouped in Knee right cobalt chrome Group 1n
ST030 Scorpio Femoral Component PA 3,5,7,9,11,13 Also grouped in Knee Group 1n
ZimmerZI110 NexGen Knee Femoral Components CR Porous HA/TCP - Co Cr A - H (L&R)
Group 1n - Uncemented, Alloy, HA coating, Posterior Stabilised
Biomet Australia Pty LtdBI887 ROCC Knee Prosthesis Femoral Component, uncemented, 1-8
anatomic, HA Coated, CoCr, HA
BI911 Oxford Tricompartmental Knee System Femoral Component, Posterior Stabilised, 60 -75mm Porous, HA Coated, CoCr, Ti, HAP
ZimmerZI062 NexGen Flex Femoral Component - Cobalt Chrome Sizes A-G Left & Right
Porous HATCP
ZI316 NexGen Flex Femoral Component - Cobalt Chrome, HATCP Sizes A-G; Left & RightPorous HATCP Coated
PART A - Prostheses List by Category, Groups and Sponsor Page 274 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 1p - Uncemented, non-Alloy, Posterior Cruciate Retaining
Endotec Australia Pty LtdEA006 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat Primary Femoral sizes
Replacement System (Primary and Tibial components with mobile 1-6(inc) Left & RightPolyethylene inserts, all polyethylene patella ceramic coated, titanium backed
Smith & Nephew Surgical Pty LtdSN691 Genesis II/Profix Macrotextured Oxinium Femoral Size 1 - 8
Group 1q - Uncemented, non-Alloy, Posterior Stabilised
De Puy AustraliaDY373 LCS Complete System Femoral Porocoat TiNi Small - Large Plus Left and Right
Knee - Femoral Component: Uni-Compartmental Knee ReplacementGroup 2a - Cemented, Alloy
Advanced Surgical TechnologiesAD205 Advance-Unicondylar Knee System Femoral component - cobolt chrome Sizes 1, 2, 3, 4
Australian Surgical Design & Manufacture Pty LtdAE066 Active Uni Compartmental Knee Uni compartmental knee resurfacing All sizes for Femoral Component:
prostheses, consisting of a Femoral component manufactured from Chrome Cobalt Molybdenum alloy, and a Tibial component manufactured from Ultra high Molecular Weight Polyethylene
Biomet Australia Pty LtdBI031 Oxford Meniscal Knee System Mark III Femoral Component, Chrome Small, Medium, Large, Extra Large.
Cobalt, Cemented
BI203 Repicci II Unicondylar Knee System Femoral Component, Cemented, Chrome 45-60mmCobalt
De Puy AustraliaDY112 Preservation Miu Knee System MIU Cemented Femoral Size 1-5
PART A - Prostheses List by Category, Groups and Sponsor Page 275 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Orthopaedic TechnologyGO032 Global re-surfacing uni-compartmental CoCrMo Size 1-5 Right medial/left lateral; Size 1-5
knee femoral implant Left medial/right lateral
Global Scientific Pty LtdGS213 UC-PLUS Solution - Unicompartmental Femoral - 4, 6, 8, 10. Tibial - 40 (8, 10,
Knee Prostheses 12, 14mm) 44, (8, 10, 12, 14mm), 48 (8, 10, 12, 14mm), 52 (8, 10, 12, 14mm), 56 (8, 10, 12, 14mm)
Link Orthopaedic AustraliaLO059 LINK Endo-Model SLED Prosthesis: Femoral Component Short, medium-short, medium & large
Smith & Nephew Surgical Pty LtdSN338 Genesis Uni Femoral Component CoCr X-Small - Magnum Plus
Stryker Australia Pty LtdST055 EIUS Femoral Component Cobalt Chrome XS, S, M, L, XL
Tornier Pty LtdTO007 HLS System Knee Prostheses (HLS Uni) Femoral Component: Cobalt Chrome 0 (small) - 5 (x-large); thickness: range 3 Also grouped in Knee
- 13mm Groups 4b, 6a
ZimmerZI401 Allegretto Unicompartmental Knee Femur - CoCr alloy Size 1 to 3, Size 1+ to 3+
Group 2b - Cemented, Alloy, PMMA coating
B Braun Australia Pty LtdBB197 Emotion TKS Femoral Component F1 - F8, Left and Right
ZimmerZI106 Miller Galante Unicompartmental Femoral Component - Co Cr 42 - 60 mm
Group 2c - Cemented, non-Alloy
Corin Australia Pty LtdCR059 AMC Uni Condylar, Cemented Femur Cemented Femur, Cobalt Chrome with 1-4
Titanium Nitrite Coating
Smith & Nephew Surgical Pty LtdSN710 Genesis Uni Femoral Component, Oxinium X-Small - Magnum
PART A - Prostheses List by Category, Groups and Sponsor Page 276 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 2d - Uncemented, Alloy
De Puy AustraliaDY113 Preservation Miu Knee System MIU Porous Femoral Size 1-5
Taylor Bryant Pty LtdTB304 HemiCAP Contoured Articular Knee System Articular Component - Cobalt Chrome Articular Component 15mm - 0.5mm x $0.00 $0.00
0.5mm to 2.0mm x 2.0mm offset; Articular Component 20mm - 1.0mm x 1.0mm to 4.0mm x 4.0mm offset
ZimmerZI428 Natural Knee Unicompartmental - Femur - Ti/CoCr Size 1 to 7
Group 2e - Uncemented, Alloy, HA coating
Biomet Australia Pty LtdBI859 Oxford Meniscal Knee System Mark III Femur, Porous or HA Coated, Small - Extra Large
CoCr, Ti, HA.
Stryker Australia Pty LtdST655 Unicompartmental Knee (Femoral Femoral component cobalt chrome with 1, 2, 3, 4
Component) HA coating
Group 2f - Uncemented, non-Alloy
Corin Australia Pty LtdCR058 AMC Uni Condylar, Femur Component, Femoral Component, Cobalt Chrome, 1-4
Bonit Coat Titanium Nitrate Ceramic Coated, Bonit (Calcium Phosphate) ingrowth surface
Knee - Patellar ComponentsGroup 9a - Cemented, all polyethylene
Advanced Surgical TechnologiesAD137 Advance Total Knee System All poly patella UHMWPE 25, 28, 32, 35, 38, 41mmAD174 Advantim Total Knee System Patellae All Poly UHMWPE 25,28,32mm
Australian Surgical Design & Manufacture Pty LtdAE050 Other Active Knee Components Patella Sizes 1 - 5
PART A - Prostheses List by Category, Groups and Sponsor Page 277 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
B Braun Australia Pty LtdBB202 Emotion TKS Patella - 1 - Peg and 3 - Pegs P1 to P6, 26 - 41 x 7 - 12mmBB208 Columbus TKS Patellar Components, 3 pegs P1 - P4
Biomet Australia Pty LtdBI176 Maxim Complete Knee System Patella Button, UHMWPE size 25 to 37mmBI194 Oxford Tricompartmental Knee System Patella Button, UHMWPE, Chrome Cobalt Size 25 to 37mmBI899 ROCC Knee Prosthesis Patella Component, all PE, cemented, 1 1-8
peg, UHMWPE
Corin Australia Pty LtdCR005 Rotaglide + Total Knee System, Patella Asymmetric Sml (35/29mm)) - Lg (43/37mm)
UHMWPE
CR006 Rotaglide + Total Knee System, Patella Dome Sml (26mm OD) - Lg (34mm OD)UHMWPE
De Puy AustraliaDP152 PFC Knee System Range PFC Sigma Patella or Universal insert Size SM - LG. Or 25-32mmDP264 SROM Knee System Noiles UHMWPE & Poly Patella Size 30-38DP377 AMK Total Knee system Poly Patella Size 30 - 38mmDP524 LCS 3 Pegged Patella All Poly & all Poly 3peg Patella Std - Lge+
Endotec Australia Pty LtdEA012 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP All Poly Patella sizes 1-6(inc)
Replacement System (Primary and Tibial components with mobile polyethelene inserts all polyethelene patella ceramic coated, titanium backed
Global Orthopaedic TechnologyGO001 RBK Total Knee System - Patellar Polyethylene 28-32mm
Global Scientific Pty LtdGS180 PLUS Knee Joint Prostheses System TC-PLUS Patella 26mm, 29mm, 32mm
Howmedica IncorporatedHW105 Duracon Total Knee System Patella - all polyethylene Small, Medium, Large, XlargeHW140 Kinematic Rotating Knee Patella - Polyethylene Small, Medium, LargeHW182 PCA Knee Patella: All Poly - Vitallium Small, Medium, Large, Extra Large
PART A - Prostheses List by Category, Groups and Sponsor Page 278 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Link Orthopaedic AustraliaLO042 LINK Endo Model Rotational Knee Patella Component Small, medium & largeLO051 LINK T.A.C.K. Knee Patella cemented Small & largeLO057 LINK Lubinus Total Patella Glide Patella Component Small, medium & large
Replacement
Mathys AustraliaMA111 Balansys Patella Component Polyethylene Dia 25mm
Orthotech Pty LtdOH023 Optetrak Total Knee System Patella 32 - 42mmOH158 Academia Knee CoCr, Titanium, Femoral, Tibial, Bearing, Patellar 34-38mm Dia/ 8-10mm
Stems & Patellar
Smith & Nephew Surgical Pty LtdSN323 Genesis II Patella Biconvex UHMWPE (Patella & 23-35mm Also grouped in Knee
Revision) Group 11
SN324 Genesis II Patella Resurfacing UHMWPE 26-35mmSN325 Genesis II Patella with flexlok UHMWPE 23-32mmSN350 Genesis Patella: Biconvex Prosthesis: UHMWPE X-Small, Small, MediumSN352 Genesis Resurfacing: Patella: UHMWPE Small - LargeSN382 Profix Patella, Inset and Onset 23-35mmSN705 Genesis II Oval Patella, UHMWPE 23 - 35mm
Stryker Australia Pty LtdSK323 Triathlon Knee System Patella Component - all poly Symmetric: 27mm x 8mm, 29mm x
8mm, 31mm x 9mm, 33mm x 9mm, 36mm x 10mm, 39mm x 11mm; Assymetric: 29mm x 9mm, 32mm x 10mm, 35mm x 10mm, 38mm x 11mm,
ST636 Osteonics Knee System Patella polyethylene 3, 5, 7, 9, 11, 13
Tornier Pty LtdTO009 HLS System Total Knee Prostheses (HLS UHMWPE Patella Component small, medium, large
ZimmerZI071 Insall-Burstein II Femoral Component Patella Button - UHMWPE 32 - 41mmZI093 Miller Galante II Patella Button: Poly -UHMWPE 32 - 41mm
PART A - Prostheses List by Category, Groups and Sponsor Page 279 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI148 NexGen Knee Patella Button Polyethylene 26 - 41ZI432 Natural Knee Patella -PE Size 0/7mm to 3/10 mmZI433 SAL Knee Patella - PE 25mm & 30mm
Group 9b - Cemented, polyethylene metal backed, mobile
Biomet Australia Pty LtdBI903 ROCC Knee Prosthesis Patella Component, rotating, cemented, 3 1-8
pegged, CoCr, UHMWPE
De Puy AustraliaDP523 LCS 3 Pegged Patella Cemented & Textured or porous coated Sm - Lge+ Also grouped in Knee
3 peg Patella Group 9d
Group 9c - Cemented, polyethylene metal backed, moulded
Stryker Australia Pty LtdST609 Osteonics Knee System Scorpio resurfaced patella components 26-32mm in 2mm increments 10mm
cobalt chrome
ZimmerZI431 Natural Knee Patella -Metal Back - PE / Ti alloy Size 0 to 3ZI454 Natural Knee Patella Titanium metal backed, Durasul UHMWPE 0-3ZI460 Natural Knee Patella Durasul UHMWPE, highly crossed linked 0 to 3
Group 9d - Uncemented, polyethylene metal backed, mobile
Biomet Australia Pty LtdBI901 ROCC Knee Prosthesis Patella Component, rotating, uncemented, 1-8
3 pegged, HA or Porous HA, CoCr, UHMWPE, Ti, HA
De Puy AustraliaDP520 LCS Universal Knee LCS Ultra Patella Sm - Lge+
Endotec Australia Pty LtdEA011 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat Mobile Patella sizes 1-
Replacement System (Primary and Tibial components with mobile 6(inc)polyethelene inserts all polyethelene patella ceramic coated, titanium backed
PART A - Prostheses List by Category, Groups and Sponsor Page 280 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Orthopaedic TechnologyGO008 RBK Total Knee System - Patella Polyethylene/metal/hydroxyapatite coating sizes 1 - 5
Group 9e - Uncemented, polyethylene metal backed, moulded
Advanced Surgical TechnologiesAD175 Advantim Total Knee System Patellae Metal Backed 25,28,32mm
Howmedica IncorporatedHW108 Duracon Total Knee System Patella - Periapatite - Insert - Small, Medium, Large, Xlarge
Polyethylene and Vitallium coated with
ZimmerZI147 NexGen Knee Patella Button Porous - Polyethylene Tantulum 26 - 41
Knee - Patello Femoral Replacement Femoral ComponentGroup 7 - Patello femoral replacement femoral component
De Puy AustraliaDY111 LCS Patellofemoral Joint Prosthesis LCS PFJ Trochlear Components Right Small - Large Also grouped in Knee
and Left Group 8
Global Orthopaedic TechnologyGO035 RBK Total Knee System - Femoral Trochlear Component, no coating CoCrMo Size 1 to 5
Component
Link Orthopaedic AustraliaLO058 LINK Lubinus Total Patella Glide Femoral Component Small, medium, large, extra large
Replacement
Orthotech Pty LtdOH152 Themis Patellar Femoral Polyethylene, CoCr, incl Trochlear Trochlear Component - Sml/ Med/ Large
Component & Patellar
OH153 Themis Patellar Femoral Polyethylene, CoCr, incl Trochlear Patellar - Sml/ Med/ Large Also grouped in Knee Component & Patellar Group 8
Smith & Nephew Surgical Pty LtdSN371 MOD III Femoral Component Small & Large
Stryker Australia Pty LtdST600 Avon Patello-femoral Prostheses Vitallium Small, Medium, Large
PART A - Prostheses List by Category, Groups and Sponsor Page 281 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Knee - Patello Femoral Replacement Patellar ComponentGroup 8 - Patello femoral replacement patellar component
Smith & Nephew Surgical Pty LtdSN394 Patella Femoral Resurfacing System Mini-Large
Stryker Australia Pty LtdSK314 Avon Patello Femoral Prosthesis Polyethylene patella button Small, Medium, Large
Knee - RevisionsGroup 11 - Revisions
Advanced Surgical TechnologiesAD142 Advance Revision Knee System Femoral Augments titanium 1 - 5, 5mm thick, 10mm thick and AD143 Advance Revision Knee System Femoral component CoCr 1, 2, 3, 4, 5, 6AD144 Advance Revision Knee System Femoral stem titanium 6 - 22mm in 1mm increments, standard
and offset length 50 - 150mm
AD145 Advance Revision Knee System PS and CCK Insert UHMWPE 1, 2, 3, 4, 5, 6 in 10 - 30mm in 2mm increments
AD146 Advance Revision Knee System Tibial augments/wedges titanium 15 degree, sizes 1, 2/1+, 3/2+, 4/3+, 5/4+, 6/5+
AD147 Advance Revision Knee System Tibial component titanium 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 6AD148 Advance Revision Knee System Tibial stem titanium 6 - 22mm in 1mm increments, standard
and offset length 50 - 150mm
AD149 Advance Revision Knee System Bone screw titanium 6.5mm x 1.5 - 6cm in 0.5cm increments AD185 Ortholoc 11 Revision Knee Femoral components CoCr Revision Small, Medium, Large, Xlarge
(Porous Coated)
AD187 Ortholoc 11 Revision Knee Tibial Revision Smooth/Finned Titanium 6" Length in Small - XlargeAD188 Ortholoc 11 Revision Knee Tibial inserts posterior stabilised UHMWPE 10-36mm in 2mm incrementsAD190 Ortholoc 11 Revision Knee Tibial Components Modular Stem Thick Small, Small Plus, Medium, Medium Plus,
Base (Porous Coated) Large, Large Plus, Xlarge
AD191 Ortholoc 11 Revision Knee Tibial Components Modular Stem Small, Small Plus, Medium, Medium Plus,Wedged Base (Porous Coated) Titanium Large, Large Plus, Xlarge
AD195 Ortholoc 11 Revision Knee Femoral stems titanium 5 Degree 6", 7 Degree 6"
PART A - Prostheses List by Category, Groups and Sponsor Page 282 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD217 ADVANCE Total Knee System Offset tibial Block Augments 1, 2/1, 3/2, 4/3, 5/4, 6/5, All in 5mm, 10mm, 15mm
Biomet Australia Pty LtdBI146 AGC Knee System Revision System consisting of : Femoral 60-75mm, 80-120mm, 63-83 mm, 63-83
Component; Femoral Stem, Femoral & Tibial Augmentation; Tibial Component.,
BI171 Maxim Complete Knee System Tibial Stem, Titanium 40mm 80mmBI182 Maxim Complete Knee System One Piece Tibial Plate and Stem, CoCr. 59-91mmBI183 Maxim Complete Knee System Tibial Femoral Wedge or Augmentation 55-80mm
Block, Titanium
BI184 Maxim Complete Knee System Tibial or Femoral Stem, Modular, 55-80mmBI201 AGC Total Knee System - Dual Articular Femoral, Tibial, Bearing, Stems and Size 55 to 75mm Fem, Size 59 to 83mm
Knee System augments/wedges. Chrome Cobalt, Bearing, Size 37 to 126mm stems, Size 55 to 70mm augment, Size 63 to 91mm
BI789 Ascent Knee System Femoral augmentation block, posterior or 4, 8, 12mmdistal, titanium
BI800 Ascent Total Knee System Femoral revision stem w/screw, coronal 5 or 7 degree, 100mm, 150mm lengths, slot, titanium 10-24mm diameters
BI811 Maxim Complete Knee System Offset tibial tray & adapter, fixation Width 59-91mm offset tibial trays neutral;screws, chrome cobalt, titanium 2.5mm, 5.0mm offset tibial tray adapters
BI821 AGC Total Knee System Tibial augments, titanium 6-16mm
Corin Australia Pty LtdCR003 Rotaglide + Total Knee System, Stem Cobalt chrome 30mm - 70mm
Extensions
CR004 Rotaglide + Total Knee System Tibial Augmentation Blocks Small 4mm - Large12mm
De Puy AustraliaDP143 PFC Knee System Range PFC Flute Tib Rod & Extension Size 75-150mmDP153 PFC Knee System Range PFC Sigma ROD or FC femoral Size 5 Deg to 7 DegDP154 PFC Knee System Range PFC Sigma FEM AUG Size 2-5DP155 PFC Knee System Range PFC Sigma Femoral stem / Bolt / Collar Neutral to +2DP158 PFC Knee System Range PFC Sigma Femoral Distal or Post Size 1-6
Augments or Combo augments
DP161 PFC Knee System Range PFC Mod PL TB WDG Types Hemi/ Stp Size 2-5/ Full or Augmented tibial wedges
PART A - Prostheses List by Category, Groups and Sponsor Page 283 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP254 SROM Knee System Noiles Hinge Femoral Comp XSml-LgeDP260 SROM Knee System SROM Noiles Tibial Augments 4-10mm size 2-6DP261 SROM Knee System Noiles Modular Tibial Sleeve 37-61mmDP266 SROM Knee System SROM Noiles Femoral Extension with 11 x 100mm to 129 x 100mmDP267 SROM Knee System PLUG Modular Sleeve with Screw One size onlyDP269 SROM Knee System SROM Noiles Femoral Augmentation 1-6 4-16mmDP271 SROM Knee System Noiles Femoral Sleeve Por Coated Size 31-46mmDP272 SROM Knee System Noiles Femoral Stem Extn/Screw Size 9 x 100 to 19 x 150DP287 AMK Coordinate Revision Knee System Revision Tibial tray or Full wedge Tray Size 1-5
Chrome cobalt
DP290 AMK Coordinate Revision Knee System Cemented stem 10mm Chrome cobalt or Size 1-6 or 8-27mm Thickness x 95-Fluted stem STD - Revision 140mm Length
DP294 AMK Coordinate Revision Knee System Insert 4 and 10mm Thick Tibial inserts Size 1-5DP378 AMK Total Knee system Co ordinate Femoral wedge DIS / Post Size 1-5
Chrome cobalt
DP383 AMK Total Knee system Revision Pin Tibial Chrome cobalt One size onlyDP570 AMK Coordinate Revision Knee System Tibial Ultra or STD Tibial or Varus Size 1-5 or 2-10mm
Valgus Constrained Inserts
DP821 LCS Revision Knee system Revision Femoral Chrome cobalt STD - LGE+DP822 LCS Revision Knee system Revision tibial Tray Chrome cobalt STD- LGE+DP823 LCS Revision Knee system Stem Extension Chrome cobalt 10 x 55mm to 22x110mmDP824 LCS Revision Knee system LCS DIST or Post or BLK Femoral SM-LGE+
Augments Chrome cobalt
DP825 LCS Revision Knee system LCS Revision Bearings SML+ to LGE++ 10m-25mm in each sizeDP826 LCS Revision Knee system Revision Textured Tibial Tray Chrome Size 1-7DP827 LCS Revision Knee system Revision Textured femoral Chrome cobalt Size SM - LG+DY148 LCS Complete Revision System LCS Complete Revision Femoral Small - Large
Cemented Right and Left
DY149 LCS Complete Revision System LCS Complete Revision Femoral Small - LargePorocoat Right and Left
DY151 LCS Complete Revision System MBT Revision Trays Cemented or 1 - 7
PART A - Prostheses List by Category, Groups and Sponsor Page 284 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY153 LCS Complete Revision System LCS Complete Revision Femoral Distal Small 5mm - Large + 15mmor Posterior Augments
DY156 LCS Complete Revision System LCS Complete PFC Sigma Revision 20 - 46mmFemoral Sleeves Porocoat
DY157 LCS Complete Revision System MBT Revision Tibial Sleeve Porous Coated 37 - 61mmDY158 LCS Complete Revision System LCS Complete Revision Insert Small 10mm - large + 30mmDY159 LCS Complete Revision System MBT Step Wedge or revision Tibial 1, 5mm - 7, 15mm
Endotec Australia Pty LtdEA013 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat Revision Femoral sizes
Replacement System (Primary and Tibial components with mobile 1-6(inc) Left & Rightpolyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA014 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented Revision Femoral Replacement System (Primary and Tibial components with mobile sizes 1-6(inc) Left & Right
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA015 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat Revision tibial sizes 1-Replacement System (Primary and Tibial Components with mobile 6(inc)
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA016 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented Revision tibial sizes 1-Replacement System (Primary and Tibial components with mobile 6(inc)
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA017 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat revision hinged femoralReplacement System (Primary and Tibial components with mobile assembly sizes 1-6(inc) Left & Right
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA018 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented revision hinged Replacement System (Primary and Tibial components with mobile femoral assembly sizes 1-6(inc) Left &
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA019 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat hinged tibial sizes 1-Replacement System (Primary and Tibial components with mobile
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
PART A - Prostheses List by Category, Groups and Sponsor Page 285 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EA020 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented hinged tibial sizes 1-Replacement System (Primary and Tibial components with mobile
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA021 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat thick hinged tibial sizesReplacement System (Primary and Tibial components with mobile 1-6(inc)
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA022 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented thick hinged tibial Replacement System (Primary and Tibial components with mobile sizes 1-6(inc)
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
EA023 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Revision stems 9mm -20mm Replacement System (Primary and Tibial components with mobile
polyethelene inserts all polyethelene patella ceramic coated, titanium backed
Howmedica IncorporatedHW082 Duracon Total Knee System Augmentation Femoral Spacers - 5mm, 10mmHW084 Duracon Total Knee System Augmentation Locking Screw - Vitallium 5mm, 10mmHW085 Duracon Total Knee System Augmentation Modular Stabiliser Box - Small, Medium, Medium-Large, Large,
Vitallium Extra-Large
HW097 Duracon Total Knee System Tibial Baseplate Screw - Vitallium 6.2mm diameter in 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 55mm, 60mm lengths
HW098 Duracon Total Knee System Augmentation Stem Extension Cementless 40mm, 80mm, 155mm lengths - Vitallium
HW099 Duracon Total Knee System Augmentation Tibial Wedge - Vitallium 5mm, 10mmHW102 Duracon Total Knee System Tibial Insert - Revision (crossover) - Small, Medium, Large, Extra-Large in
Polyethylene each thickness 9mm, 11mm, 13mm, 16mm, 19mm, 22mm, 25mm, 28mm,
HW153 Kinemax Knee Femoral Augmentation Cobalt Chromium 5mm/10mmHW167 Kinemax Knee Tibial: Fixation Peg - Vitallium 20mmHW168 Kinemax Knee Tibial: Wedge Full - Vitallium 10mm per sizeHW169 Kinemax Knee Tibial: Wedge - Vitallium 7.5mm per sizeHW170 Kinemax Knee Tibial : Block - Vitallium 5mm, and 10mm per size
PART A - Prostheses List by Category, Groups and Sponsor Page 286 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW171 Kinemax Knee Femoral/Tibial: Extension Stem - Vitallium 40mm, 80mm, 155mm for each size
Orthotech Pty LtdOH026 Optetrak Total Knee System CCK Tibial Augmentation Block Size 1 - 6OH027 Optetrak Total Knee System CCK Tibial & Femoral Stems Size 1 - 6OH029 Optetrak Total Knee System CCK Femoral Augmentation Block Size 1-6OH056 Optetrak Total Knee System Tibial Stem Screw One size onlyOH057 Opetrak Total Knee System Femoral Stem Extension Adapter One size only
Smith & Nephew Surgical Pty LtdSN314 Genesis II Conversion module Left/Right size 1-8SN316 Genesis II Femoral/tibial long stems 10-24x100mm, 10-20 x 150mm 10-16x
200mm
SN330 Genesis II Wedge Full Tibial, Distal Femoral, 1-8Stacked Femoral L, Posterior Femoral, Angled Hemi, Stepped Hemi, Medial
SN341 Genesis Constrained Conversion Module: CoCr Left/Right Small-Magnum PlusSN351 Genesis PS Conversion Module Resurfacing: Co Cr Left/Right Small - MagnumSN353 Genesis Revision Articular Insert Left/Right Constrained Small - Xlarge,
Crutiate retaining Size 1-8, Post Stabilising Size 1-8, Tricon/Genisis Small-
SN358 Genesis Wedge Small-Magnum 4mm-15mmSN381 Profix Non Porous Wedge, Distal and L-Wedge 1-7. Small - Large SN384 Profix Porous wedge 1-7SN715 Genesis II Long Stem Tibial Components 18 - 24mm x 200mmSN717 Genesis II/Profix Offset Couplers 2 - 4mmSN719 Genesis II Revision Screw on Wedge, Hemi-Angled 25mm
& Stepped
SN720 Genesis II Revision Screw on Wedge, Hemi-Angled 35mm& Stepped
SN721 Genesis II Press Fit Stems Non-slotted, 10-16 x 100mmSN722 Genesis II Press Fit Stems Slotted, 10-24 x 150-200mmSN724 Genesis II Revision Tibial Tray 1-8
PART A - Prostheses List by Category, Groups and Sponsor Page 287 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN725 Genesis II Revision Screw on Wedge, Full Angled 1-8and Stepped
Stryker Australia Pty LtdST018 Scorpio Augmentation Femoral / Tibial Cobalt Chrome 5mm & 10mm for all sizes of femur and
tibia. 5 degrees for all tibia sizes
ST024 Scorpio Tibial Insert Revision 8-24mm for all tibia sizesST026 Scorpio Offset Adaptor Cobalt Chrome 2mm-8mmST034 Scorpio Tibial Tray Revision 3,5,7,9,11,13ST061 Scorpio Femoral Component Revision 3,5,7,9,11,13ST601 Duracon total knee system Tibial insert stabiliser revision vitallium Extra Small, Small, Medium, Medium
Large, Large, Extra Large
ST602 Duracon total knee system Femoral component stabiliser revision Extra Small, Small, Medium, Medium vitallium Large, Large, Extra Large
ST603 Duracon total knee system Augmentation offset adaptor vitallium 4mm, 6mm, 8mmST604 Duracon total knee system Augmentation revision vitallium 5mm, 10mmST606 Duracon total knee system Stem fluted - femoral/tibia vitallium 10mm-19mm, 21mm, 23mm in 80mm
and 155mm lengths
ST658 Osteonics Knee System Augmentation - Fem/Tib cobalt chrome 3, 5, 7, 9, 11, 13 in 4mm, 8mm, 10 degree and 20 degree
ZimmerZI064 Insall-Burstein II Articulating Surface CCK - UHMWPE 10 - 25mmZI065 Insall-Burstein II Articulating Surface CCK (extra thick) - UHMWPE 30, 35mmZI067 Insall-Burstein II Augmentation Distal - TI, Co Cr 5, 10mmZI068 Insall-Burstein II Augmentation Posterior/Distal - Ti, Co Cr 5, 10mmZI072 Insall-Burstein II Femoral Component Tibial/Femoral Stem - Ti 10 - 24mmZI075 Insall-Burstein II Wedge Full - Ti 7 - 20mmZI095 Miller Galante II Stem: Long - Ti 12 - 18mmZI096 Miller Galante II Stem: Regular - Ti 12 - 18mmZI104 Miller Galante II Other Tibial Tray:Porous Flat (revision) - A - KZI137 NexGen Knee Articulating Surfaces CCK - UHMWPE 10 - 35mmZI140 NexGen Knee Tibial Augments Half Wedge - Ti 1 - 10
PART A - Prostheses List by Category, Groups and Sponsor Page 288 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI141 NexGen Knee Tibial Augments Full Wedge - Ti 1 - 10ZI142 NexGen Knee Tibial Augments One Third Wedge - Ti 1 - 10ZI143 NexGen Knee Tibial Augments Half Block - Ti 1 - 10ZI144 NexGen Knee Femoral Augments Dist.,Ant or Post - Ti A - HZI145 NexGen Knee Femoral Augments Dist + Post 1 - 10ZI146 NexGen Knee Stem Extensions Titanium Length - 35 - 155mm, Diameters - 10 - ZI266 Continuum knee system Hedrocel augment - patella prosthesis Small, medium, large and x-largeZI305 Nexgen Rotating Hinge Femur Cobalt chrome femoral component for B-F
rotating hinge knee, available left to right
ZI307 Nexgen Rotating Hinge Articulating Ultra high molecular weight polyethylene 12-26mm, sizes B-Farticulating tibial insert
ZI308 Nexgen Rotating Hinge Tibia Cobalt chrome rotating platform tibial plate 1-6ZI309 Nexgen Rotating Hinge Replacement Hinge Rotating hinge replacement bushing for B-FZI404 Natural Knee System Tibial Spacers - special metal alloy 4 to 8mm Size 00 to 5 Also grouped in Knee
Group 10
ZI416 Natural Knee Revision -Tibial Baseplate - Ti alloy 0 to 5ZI417 Natural Knee Revision -Tibial Stem - Ti alloy 60 to 215mmZI422 Natural Knee Femoral Spacer Lug - Ti alloy 4 to 12mmZI423 Natural Knee Revision - Femur Porous -Ti/CoCr alloy Size 00 to 4 (left & right), ZI424 Natural Knee Revision - Femur Stem, Ti alloy 10.5mm/125mm to 16.5mm/250mmZI426 Natural Knee Femoral Stem Screw - metal alloy One size onlyZI427 Natural Knee Revision Posterior Stabilising Bar - CoCr One size only
alloy
Knee - Special IndicationsGroup 10 - Special Indications
Advanced Surgical TechnologiesAD241 Limb Salvage System for the skeletally Repiphysis non invasive expandable Custom Made
immature - Repiphysis custom designed Tibial Extension. Comprised of tibial base, axial bushing, axial pin - CoCr, Titanium, UHMWPE
PART A - Prostheses List by Category, Groups and Sponsor Page 289 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD242 Limb Salvage System for the Skeletally Repiphysis non invasive expandable Custom MadeImmature - Repiphysis custom designed Distal Hinge Femoral
Extension. Distal hinge femur, stem fixation pin, spring housing tube, anti-rotation cylinder & pins, end cap, retaining tube, spring, antenna, isolant ring - CoCr, Titanium, PEEK Polyacetal
AD243 Guardian Limb Salvage System Guardian Femoral Neck & Mid-Section - 40, 50, 60, 70, 90, 110, 140mmStandard Taper - Titanium
AD244 Guardian Limb Salvage System Guardian Distal Femur Regular Axial Pin - Left & Right CoCr, Titanium
AD245 Guardian Limb Salvage System Guardian Tibial Hinge Assembly One Size onlyWith/Without Rotational Stop Pin - CoCr
AD246 Guardian Limb Salvage System Guardian Distal Femur Quick Snap Axial Left & RightPin - CoCr, Titanium
AD247 Guardian Limb Salvage System Guardian Distal Femoral Tibial Hinge Base 1 - 4 - Titanium
AD248 Guardian Limb Salvage System Guardian Tibial Sleeve 1 - 5AD249 Guardian Limb Salvage System Guardian Duramer Tibial Sleeve Spacer - 8, 10, 12, 16, 20mm
UHMWPE
AD250 Guardian Limb Salvage System Guardian Male-Male Mid-Section Taper - 40, 50, 60, 70, 90, 110, 140mmTitanium
AD251 Guardian Limb Slavage System Guardian Non Porous Femoral Stem 11, 13, 15, 17mm x 152mmStraight/Tapered - Titanium
AD252 Guardian Limb Salvage System Guardian Proximal Tibia - Titanium One Size OnlyAD253 Guardian Limb Salvage System Guardian Resurfacing Femur - CoCr, 2, 3, 4, Left & Right
Titanium
AD254 Guardian Limb Salvage System Guardian femoral Stem Straight With 9, 11, 13 x 120mmPlasma Collar - Titanium
AD255 Guardian Limb Salvage System Guardian porous Collared Femoral Stem 11, 13, 15, 17mm x 152mmStraight/Tapered - Titanium
AD256 Guardian Limb Salvage System Guardian Femoral Stem Straight - Titanium 9, 11, 13 x 120mm
PART A - Prostheses List by Category, Groups and Sponsor Page 290 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Biomet Australia Pty LtdBI193 Finn Knee System Resurfacing and Segmental System. Segmental tibial 110 - 152, segmental
UHMWPE, Chrome Cobalt components (10-24cm) x (11-17mmdiam) yoke std or long, lock pin, locking screw (3), bushing (2) axleFemoral Comp: R or L, std, +5cm Mod. Stem 89, 152 x (9-22mm) Tibial plate 67-81mm Tibial augment 67-83mm
BI864 Orthopaedic Salvage System Stem, Cemented or Porous, Ti (9-19)mm diameter x (90-300)mm BI865 Orthopaedic Salvage System Femoral Component, Resurfacing or 30 - 70mm
Segmental, CoCr,Ti
BI866 Orthopaedic Salvage System Femoral or Tibial Augment, Ti Femoral Sleeve - One Size; Femoral Flange - One Size; Tibial Block Augment 10-20mm; Tibial Augment Sleeve -
BI867 Orthopaedic Salvage System Femoral/Tibial Interlocking One size only except for Locking Screw -devices:Locking Pin, Femoral and Tibial Small or Large; Tibial Bearing - 12-Bushings, Tibial Bearing, Axle, Reinforced Yoke, Locking Screws. CoCr,
BI868 Orthopaedic Salvage System Diaphyseal Segment or Diaphyseal Diaphyseal Segment 3-23cm, Diaphyseal Coupler, Stacking Adapter and Locking coupler 10-30cm
BI869 Orthopaedic Salvage System Tibial Component, Resurfacing or 63-83mmSegmental, Modular and non Modular,
BI890 Rotating Hinge Knee (RHK) Augments, Femoral and Tibial, CoCr, Ti Femoral; 10, 20, 30mm LL, LM, RL, RM, Tibial; 10, 15mm RM/LL, RL/LM,
BI891 Rotating Hinge Knee (RHK) Resurfacing Tibial Tray, Modular and Stemmed 59, 63, 67, 71mm widths; Stemmed Modular 59, 63, 67, 71, 75, 79, 83mm
BI892 Rotating Hinge Knee (RHK) Femoral Component, Resurfacing, Small, Standard, Large; Left and Rightcemented,anatomic, CoCr
BI893 Rotating Hinge Knee (RHK) Interlocking Components: Bearing Insert, Bearing Insert - 12, 14, 16, 18, 20mm Yoke, Tibial and Femoral Bushings, Axle, thicknesses, Yoke - short and long, Axle -Axle Locking Pin, UHMWPE, Ti, CoCr one size, Axle Lock Pin - one size, Tibial
and Femoral Bushings - one size
De Puy AustraliaDP255 SROM Knee System Noiles Replacement Bumper Noiles XSml - Medium Also grouped in Knee
Modular or Replacement Hinge Bearing Group 11
DP262 SROM Knee System Noiles Cap with Screw for Tibial Base One size only Also grouped in Knee Group 11
PART A - Prostheses List by Category, Groups and Sponsor Page 291 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW141 HMRS Tibial Baseplate Cobalt Chrome Small, Medium, LargeHW142 Kinematic Rotating Knee Tibial Bearing - Vitallium Small and Medium in11mm, 13mm,
16mm, 21mm
HW143 HMRS Femoral Component Cobalt Chromium Left, RightHW144 Kinematic Rotating Knee Tibial Component - Vitallium Small and Medium 11mm/15mm by
110mm/180mm
HW145 Kinematic Rotating Knee Axles, Bumpers, Bushings - Vitallium One size onlyHW202 Howmedica Modular Resection System Wedge - Vitallium One size onlyHW231 Howmedica Modular Resection System Tibial Rotating Component - Vitallium One size onlyHW232 Howmedica Modular Resection System Tibial Insert - Polyethylene 6, 10, 14mmHW233 Howmedica Modular Resection System Tibial Sleeve - Vitallium One size onlyHW234 Howmedica Modular Resection System Tibial Stemmed Tray - Vitallium One size onlyHW248 HMRS Tibial Insert Polyethylene Extra Small, Small, Medium, Large, Extra
Large
Link Orthopaedic AustraliaLO041 LINK Endo Model Rotational Knee Intracondylar total rotation knee join with Small, medium & large
Anti Lux device: with patella flange
LO043 LINK Endo Model Rotational Knee Tibial Spacers Small, medium & largeLO044 LINK Endo Model Rotational Knee Total Rotational Knee Joint with Anti Lux Small, medium & large
Device, with Patella Flange and Replacement of Femoral and/or Tibial Bone Structures, Distal femur
LO046 LINK Endo Model Rotational Knee Total Rotational Knee Joint with Anti Lux Extra small, small, medium & largeDevice, with Patella Flange and Replacement of Femoral and/or Tibial Bone Structures, distal femur & proximal
LO047 LINK Endo Model Rotational Knee Total hinge knee: without patella flange Small, medium & largeLO048 LINK Endo Model Rotational Knee Total hinge knee: with patella flange Small, medium & large
Smith & Nephew Surgical Pty LtdSN694 Knee Component Femoral, tiabial or insert Size 0 - 10
PART A - Prostheses List by Category, Groups and Sponsor Page 292 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stryker Australia Pty LtdSK156 Howmedica Modular Resection System GMRS Proximal Tibial Component, Cast Small, Standard
Chrome Cobalt
SK157 Howmedica Modular Resection System GMRS Distal Femoral Component, Cast Small Left 65mm, Small Left 75mm, Chrome Cobalt Small Left 85mm, Small Left 95mm,
Small Right 65mm, Small Right 75mm, Small Right 85mm, Small Right 95mm, Standard Left, Standard Right
SK158 Howmedica Modular Resection System GMRS Proximal Femoral Component, Standard, Trochanteric, SmoothCast Chrome Cobalt
SK159 Howmedica Modular Resection System GMRS (HMRS+) Curved Anchorage 12, 13, 14, 15, 16, 17, 19mmStems, Cobalt Chrome
SK161 Howmedica Modular Resection System GMRS Extension Piece, Titanium/Cobalt 30, 40, 50, 60, 70, 80, 100, 120, 140, Chrome 160, 180, 200, 220mm
SK162 Howmedica Modular Resection System GMRS Connection Piece, Left 80, 90mm; Right 80, 90mmTitanium/Cobalt Chrome
SK166 Howmedica Modular Resection System GMRS Press fit stems long bowed 11, 12, 13, 14, 15, 16, 17, 18, 19mmSK168 Howmedica Modular Resection System GMRS Press fit stems straight fluted 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, SK330 Modular Replacement System MRS femoral stems with female taper 11 x 127mm, 13 x 127mm, 15 x 127mm,
17 x 127mm
SK331 Modular Rotating Hinge Knee System MRH HDP ASSEMBLY PACK, One size onlyconsisting of 1 x polyethylene tibial sleeve, 1 x polyethylene bumper insert and 2 x polyethylene femoral bushing
Surgical HouseSU189 METS Modular Total Femur Modular system, comprising Various
Trochanters, Total Femoral Links, Shafts, Femoral Knees (condyles), Tibial Knees, Tibial Plateaus, Femoral Heads
SU192 METS Modular Distal Femur Modular system, comprising Stems, Stem Various Collars, Shafts, Shaft Extension, Femoral Knees (condyles), Tibial Knees, Tibial Plateaus
ZimmerZI425 Natural Knee Revision - Femoral Spacers Non Porous - Size 0 to 4 Also grouped in Knee
metal alloy Group 11
PART A - Prostheses List by Category, Groups and Sponsor Page 293 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Knee - Tibial Insert: Total Knee ArthroplastyGroup 5a - Posterior Cruciate Retaining, fixed
Advanced Surgical TechnologiesAD138 Advance Total Knee System Traditional tibial insert 1, 2, 3, 4, 5, 6 in 10 - 30mm in 2mm
increments
AD139 Advance Total Knee System Metal pivot UHMWPE tibial 1, 2, 3, 4, 5, 6 in 10 - 30mm in 2mm increments
AD171 Advantim Total Knee System Tibial Inserts Total Condylar UHMWPE 10-36mm in 2mm incrementsAD280 Advance Double High Tibial Insert Double-High Tibial Insert - UHMWPE All inserts are available in Left and Right: Also grouped in Knee
Sizes 1.5, 0, 1, 2, 3, 4, 5, & 6, in the Group 5cfollowing increments of 10, 12, 14, 17, 20 & 25mm
Australian Surgical Design & Manufacture Pty LtdAE049 Other Active Knee Components Meniscal Insert Sizes 1 - 5 Thickness 6 - 15.5mm
Biomet Australia Pty LtdBI149 AGC Total Knee System Tibial Bearing, 'Tradition' Cruciate 59-91mm Also grouped in Knee
Retaining, UHMWPE Group 5c
BI172 Maxim Complete Knee System Tibial Bearing Primary, UHMWPE 59-91mmBI798 Ascent Total Knee System Tibial bearing, cruciate retaining, 59, 63/67, 71/75, 79/83, 87/91mm
UHMWPE, curved or lipped widths, 10-20mm thicknesses
BI801 Ascent Total Knee System Tibial bearing, posterior or anterior 59-91mm width x 8-20mm thickness Also grouped in Knee stabilised, UHMWPE Group 5c
BI888 Vanguard Total Knee System Tibial Bearing, CR, curved or lipped, 59, 63/67, 71/75, 79/83, 87/91 widths, UHMWPE 10, 12, 14, 16, 18, 20mm thicknesses
De Puy AustraliaDP162 PFC Knee System Range PFC Sigma Knee Duofix insert Size 1-6
Global Scientific Pty LtdGS212 UC-PLUS Tibial Component All Poly Tibial Component All Poly 40 (8mm, 10mm, 12mm, 14mm), 44
(8mm, 10mm, 12,, 14mm), 48 (8mm, 10mm, 12mm, 14mm), 52 (8mm, 10mm, 12mm, 14mm), 56 (8mm, 10mm,
PART A - Prostheses List by Category, Groups and Sponsor Page 294 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW091 Duracon Total Knee System Tibial Insert - AP Lipped - Polyethylene Small, Medium, Large, Extra-Large in
each thickness 9mm, 11mm, 13mm, 16mm, 19mm, 22mm, 25mm
HW160 Kinemax Knee Tibial Insert: Low Stress, Duration - 8, 10, 12, 15, 18, 21, 25mm per sizeVitallium
HW162 Kinemax Knee Tibial Insert: All Poly, Duration - Vitallium 8, 10, 12, 15, 18, 21mm per sizeHW174 Kinemax Knee Tibial Insert: KMS - Vitallium 8, 10, 12, 15, 18, 21, 25mm per size
Mathys AustraliaMA110 Balansys Tibial Component Tibial insert Insert 64/8 - 85/15.5 Also grouped in Knee
Group 5e
Smith & Nephew Surgical Pty LtdSN310 Genesis II Inserts Deep dished 1-8. 9 - 21mmSN317 Genesis II Inserts Articulating 1-8 9mm-18mmSN348 Genesis Insert: Articular: Cruciate Retaining: Left & Right XS-Magnum 8MM-15MM
UHMWPE
SN372 Profix Conforming Plus articular insert Left/Right Size 1-6. 10 - 35mmSN389 Profix Tibial Insert Left/Right Size 1-6 10-20mmSN750 Genesis II Hi-Flex Cruciate Retaining Insert 1-8, 9 25mm
Stryker Australia Pty LtdSK090 Duracon Total Knee System Tibial Insert AP-Lipped - Duration XS,S,M,L,XL Thickness
Polyethylene 9,11,13,16,19,22,25mm
SK195 Scorpio Tibial Bearing Insert Cruciate Retaining, UHMWPE Sizes: 3, 5, 7, 9, 11, 13 Thickness: 8mm, 10mm, 12mm, 15mm, 18mm, 21mm,
SK328 Triathlon Knee System Tibial insert, cruciate retaining and Sizes 1 to 8 (9/11/13/16/19/22/25mm Also grouped in Knee posterior stabilised thickness) Group 5c
SK333 NRG Knee System Tibial inserts, cruciate retaining and Sizes 3,4,5,6,7,9,11,13, x Also grouped in Knee posterior stabilised (8/10/12/15/18/21/24mm thickness) Group 5c
ST608 Osteonics Knee System Scorpio tibial insert cobalt chrome 8-18mm in 2mm increments Also grouped in Knee Group 5c
ST643 Osteonics Knee System Tibial insert primary polyethylene 3, 5, 7, 9, 11, 13 in 8, 10, 12, 15, 18, Also grouped in Knee 21,24mm Group 5c
PART A - Prostheses List by Category, Groups and Sponsor Page 295 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI077 Miller Galante I Articulating Surface - UHMWPE 8 - 22mmZI088 Miller Galante II Articulating Surface - UHMWPE 9 - 23mmZI134 NexGen Knee Articulating Surfaces Standard - UHMWPE 9 - 23 mmZI135 NexGen Knee Articulating Surfaces Ant. Constr. - UHMWPE 9 - 23mmZI139 NexGen Knee Articulating Surfaces Anatomically Rotated - UHMWPE 9 - 23mmZI291 NexGen Prolong Articulating Surface Highly Crosslinked - Ultra High Molecular Purple, Striped Purple, Yellow, Striped
Weight Polyethylene Yellow, Green, Striped Green, Blue, Striped Blue in 9mm, 10mm 12mm 14mm 17mm, 20mm
ZI410 Natural Knee PE Tibial Baseplate Insert - Congruent 00 to 22mmZI411 Natural Knee PE Tibial Baseplate Insert - Ultra 9 to 22mmZI450 Natural Knee PE Insert Highly crossed linked Durasul PE One size only
Group 5b - Posterior Cruciate Retaining, mobile
Australian Surgical Design & Manufacture Pty LtdAE046 Active Mobile Bearing Meniscal Insert Sizes 1 - 5 Thickness 6 - 9.5mm
Biomet Australia Pty LtdBI197 Oxford Tricompartmental Knee System Tibial Bearing, UHMWPE 60-75mm
Corin Australia Pty LtdCR007 Rotaglide + Total Knee System, Tibial Mobile 7mm - 17mm
Insert UHMWPE
CR008 Rotaglide + Total Knee System, Tibial Fixed 9.5mm - 17mmInsert UHMWPE
De Puy AustraliaDP008 LCS Complete System APG Insert or APG Guide Arm small - xlarge, sizes 10 - 20mm or Size 1-7DP026 LCS Complete System RP Tibial Insert Small - large, size 10 - 30mm Also grouped in Knee
Group 5d
DP238 LCS Total Knee System Meniscal or Rotating Platform Bearings 10-17.5mm Std to Lge+ Also grouped in Knee Standard and Deep Dish Group 5d
DP273 SROM Knee System PROM Insert Curved & Stabilised (Noiles) Size 2-5 Also grouped in Knee Group 5d
PART A - Prostheses List by Category, Groups and Sponsor Page 296 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP521 LCS Universal Knee LCS Ultra inserts Sm - Lge+DY369 LCS Complete System Tibial Inserts Small to Large + thickness 10-25mmDY375 LCS Complete System APG Insert or APG Guide Arm TiNi Aml - Xlrge, sizes 10-20mm or Size 1-7DY376 LCS Complete System RP Tibial Insert for TiNi Small - Large + from thickness 10-25mm
Endotec Australia Pty LtdEA010 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR mobile bearing insert sizes 1-
Replacement System (Primary and Tibial components with mobile polyethelene inserts all polyethelene patella ceramic coated, titanium backed
Global Orthopaedic TechnologyGO002 RBK Total Knee System - Tibial insert Polyethylene 1-5, 10-20mm
Global Scientific Pty LtdGS179 PLUS Knee Joint Prostheses System TC-PLUS Tibial Insert PE 2 to 12 Also grouped in Knee
Group 5d
Link Orthopaedic AustraliaLO050 LINK T.A.C.K. Knee Rotating Platform Extra-small, small, medium & largeLO053 LINK T.A.C.K. Knee Bridging Articulating Surface Extra-small, small, medium & large
Orthotech Pty LtdOH022 Optetrak Total Knee System Insert Size 1 - 6 Also grouped in Knee
Group 5d
OH157 Academia Knee CoCr, Titanium, Femoral, Tibial, Bearing, Tibial Insert 40-55/10-20mm Also grouped in Knee Stems & Patellar Group 5d
Smith & Nephew Surgical Pty LtdSN320 Genesis II Mobile Bearing Standard Insert Left & Right, Size 1-8, 9-15mm SN378 Profix Mobile Bearing Stabilised Insert Size 1-8 10-16mmSN379 Profix Mobile Bearing Standard Insert Size 1-8 10-16mmSN699 Profix Mobile bearing stabilised insert 1-8, 18-20mm
Stryker Australia Pty LtdST032 Scorpio Tibial Insert Mobile Bearing 8-24mm for all tibia sizes Also grouped in Knee
Group 5d
ST912 Duracon Total Knee Tibial Insert Duracon ISA Mobile-Bearing PE Tibial Small, medium, large, X-large - left, right
PART A - Prostheses List by Category, Groups and Sponsor Page 297 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI138 NexGen Knee Articulating Surfaces MBK - UHMWPE 9 - 23mmZI408 Natural Knee PE Insert Mobile Bearing 00 to 22mmZI434 SAL Knee PE Insert - Mobile Bearing Mobile Bearing - 0/1 to E/16
Group 5c - Posterior Stabilised, fixed
Advanced Surgical TechnologiesAD136 Advance Total Knee System Tibial base insert UHMWPE 1, 2, 3, 4, 5, 6
Australian Surgical Design & Manufacture Pty LtdAE047 Other Active Knee Components Posterior Stabilised Meniscal Insert Sizes 1 - 5 Thickness 6 - 15.5mm
Biomet Australia Pty LtdBI179 Maxim Complete Knee System Tibial Bearing, Posterior Stabilised 59-91mm
UHMWPE
BI905 AGC Total Knee System Tibial Bearing 'Tradition' Posterior 59-91mmStabilised, UHMWPE
Howmedica IncorporatedHW092 Duracon Total Knee System Tibial Insert - Stabilised - Polyethylene Small, Medium, Large, Extra-Large in
each thickness 9mm, 11mm, 13mm, 16mm, 19mm, 22mm, 25mm
Smith & Nephew Surgical Pty LtdSN331 Genesis II Inserts Inserts PS 1-8. 9-25mmSN349 Genesis Insert: PS Articular: UHMWPE Right/Left S-XL 8mm-25mmSN392 Profix Tibial PS Insert Left/Right Size 1-6 10 - 35mmSN727 Genesis II High Flex PS Insert, UHMWPE 1-8, 9-25mm thickness
Stryker Australia Pty LtdSK192 Scorpio Tibial Bearing Insert Posterior Cruciate Sacrificing, UHMWPE 3, 5, 7, 9, 11, 13; Thickness 8, 10, 12,
15, 18, 21, 24mm
SK193 Scorpio Tibial Bearing Insert Posterior Substituting, UHMWPE 3, 5, 7, 9, 11, 13; Thickness 8, 10, 12, 15, 18, 21, 24mm
ST644 Osteonics Knee System Tibial insert posterior stabilised - PSI 3, 5, 7, 9, 11, 13 in 8, 10, 12, 15, 18, polyethylene 21,24mm
ST645 Osteonics Knee System Tibial insert posterior stabilised - PSII 3, 5, 7, 9, 11, 13 in 8, 10, 12, 15, 18, polyethylene 21,24mm
PART A - Prostheses List by Category, Groups and Sponsor Page 298 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST646 Osteonics Knee System Tibial insert posterior stabilised - PSIII 3, 5, 7, 9, 11, 13 in 8, 10, 12, 15, 18, polyethylene 21,24mm
ST925 Scorpio Tibial Bearing Insert Scorpio tibial insert - superflex. 3, 5, 7, 9 , 11, 13 in thickness 8, 10, 12, Composition - N2VAC UHMWPE 15, 18, 21, 24mm
ZimmerZI057 NexGen Articulating Surfaces LPS Flex Polyethylene Sizes 9 - 23mmZI066 Insall-Burstein II Articulating Surface PSK - UHMWPE 8 - 25mmZI136 NexGen Knee Articulating Surfaces PS - UHMWPE 9 - 23mmZI409 Natural Knee PE Tibial Baseplate Insert - P.S. 00 to 22mm
Group 5d - Posterior Stabilised, mobile
Biomet Australia Pty LtdBI885 ROCC Knee Prosthesis Rotating Platform Bearing, ARCOM 1-6 (tray size), 10-20mm (bearing size)
UHMWPE
BI894 ROCC Knee Prosthesis Tibial Baseplate, Cemented, Chrome 1-8Cobalt, UHMWPE
BI907 TRAC Knee System Bearing Posterior Stabilised UHMWPE 59 - 91mm
De Puy AustraliaDP166 PFC Knee System Range PFC Sigma Knee PR Insert Size 1-6DP270 SROM Knee System NPS Tibial Plateau XSml -LgeDP388 AMK Total Knee system Posterior stabilised or Tibial or Size 1-5
Congruency or Constrained insert
DY372 LCS Complete System PS Tibial Insert - Mobile Sml to Lge Plus 10-25mmDY405 RPF PS Tibial Inserts Size 1 to 6 from 10 to 17.5mm
Stryker Australia Pty LtdST926 Scorpio Tibial Bearing Insert Scorpio tibial insert - mobile bearing - 3, 5, 7, 9 , 11, 13 in thickness 8, 10, 12,
superflex. Composition - N2VAC 15, 18, 21, 24mm
ZimmerZI058 NexGen Articulating Surfaces LPS Polyethylene Sizes 9 - 23mm Also grouped in Knee
Group 5f
PART A - Prostheses List by Category, Groups and Sponsor Page 299 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 5e - Totally Constrained, fixed
B Braun Australia Pty LtdBB207 Columbus TKS Gliding Surface T1 - T5BB209 Columbus TKS Gliding Surface with Screw T1 - T5
Biomet Australia Pty LtdBI181 Maxim Complete Knee System Tibial Bearing, Contrained. UHMWPE 59-91mmBI802 Ascent Total Knee System Tibial bearing, constrained, UHMWPE 59, 63/67, 71/75, 79/83, 87/91mm
widths, 10-20mm thicknesses
BI904 Vanguard Total Knee System Tibial Bearing, PS, UHMWPE 59, 63/67, 71/75, 79/83, 87/91, widths, 10. 12, 14, 16, 18, 20, 22, 24mm
De Puy AustraliaDP145 PFC Knee System Range PFC Sigma PLI or CVD or CS inserts or Size 1-6 Also grouped in Knee
Group 6b
Howmedica IncorporatedHW161 Kinemax Knee Tibial Insert: Stabilizer - Vitallium 8, 10, 12, 15, 18, 21, 25mm per size
Orthotech Pty LtdOH025 Optetrak Total Knee System CCK Tibial Insert with Screw Size 1 - 6
Smith & Nephew Surgical Pty LtdSN313 Genesis II Constrained Insert 1-8 11-30mmSN340 Genesis Constrained Articular Left/Right Small- XLarge 10mm - 25mmSN662 Profix Constrained Femur Insert, UHMWPE Left & Right, Size 1-6, 10 - 20mm Also grouped in Knee
Group 11
Group 5f - Totally Constrained, mobile
B Braun Australia Pty LtdBB198 Emotion TKS Articulating surface T1 to T8 Size: 10 to 24mm
De Puy AustraliaDP257 SROM Knee System NRH Tibial Plateau size XSml - MedDY367 PFC Knee System Range PFC Sigma RP TC3 Size 1.5 to 5 thickness of 15.5 to 30mm
PART A - Prostheses List by Category, Groups and Sponsor Page 300 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mathys AustraliaMA311 Balansys Mobile Insert Tibial Polyethylene Component Mobile 64/8mm - 85/15.5mm
Bearing
Knee - Tibial Insert: Uni-Compartmental Knee ArthroplastyGroup 6a - Fixed bearing
B Braun Australia Pty LtdBB203 Emotion Unicondylar Uni gliding surface F1 and F5, 3mm
Biomet Australia Pty LtdBI202 Repicci II Unicondylar Knee System Tibial Component, Cemented, UHMWPE 32-42mmBI205 Repicci II Unicondylar Knee System Tibial Bearing, Modular, UHMWPE Std, Large, Xlarge
De Puy AustraliaDY115 Preservation Miu Knee System MIU Fixed or Mobile Bearing Inserts 1, 9.5mm - 5, 13.5mm
RM/LL and LM/RL
Smith & Nephew Surgical Pty LtdSN334 Genesis Uni Articular Insert UHMWPE x-Small-Magnum 8mm-12mmSN706 Genesis Uni Tibial Insert, UHMWPE X-Small - Magnum, 8-12mm
Stryker Australia Pty LtdSK194 Eius Unicompartmental Knee System Tibial Insert UHMWPE XS, S, M, L, XL; Thickness 8, 9, 10, ST653 Unicompartmental Knee (Tibial Bearing) Tibial insert polyethylene 1, 2, 3, 4 in 8, 10, 12, 15mmST656 Unicompartmental Knee (Tibial Bearing) Tibial insert polyethylene 1, 2, 3, 4 in 8, 10, 12, 15mm
ZimmerZI105 Miller Galante Unicompartmental Articulating Surface - UHMWPE 8 - 14 mmZI429 Natural Knee Unicompartmental - Tibia PE Insert 1,2 x 9mm to 5,6 x 13mm
Group 6b - Mobile bearing
Biomet Australia Pty LtdBI032 Oxford Meniscal Knee System Mark III Tibial Bearing , UHMWPE Small Standard, Large, Xlarge, sizes 3-9 BI861 Oxford Meniscal Knee System Mark III Tibial Bearing, Anatomic, (Small - Extra Large) x (3-9)
UHMWPE.
PART A - Prostheses List by Category, Groups and Sponsor Page 301 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Corin Australia Pty LtdCR060 AMC Uni Condylar, Tibial Insert Bearings UHMWPE Bearings Height 4, 5, 6, 7, 8, 9, 10, 11, 12mm;
De Puy AustraliaDP351 LCS UNI Knee system AP GLIDE Tibial Porocoat Chrome Size 1-6
Knee - Tibial Tray Component: Total Knee Arthroplasty
Advanced Surgical TechnologiesAD276 Advance HA Coated Tibial Base Titanium HA coated Tibial Base 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 6
Group 3a - Cemented, all polyethylene
Advanced Surgical TechnologiesAD170 Advantim Total Knee System All Poly Tibial UHMWPE Small, Medium, Large, Xlarge
Australian Surgical Design & Manufacture Pty LtdAE048 Other Active Knee Components All Polyethylene Tibial Implant Sizes 1 - 5 Thickness 6 - 15.5mm
De Puy AustraliaDP151 PFC Knee System Range PFC Sigma CVD or PLI Poly tibial Size 1-6 Also grouped in Knee
Groups 3l, 5a
DP285 AMK All Poly Tibia All Poly Tibial tray Size 1/2 to 5
Howmedica IncorporatedHW095 Duracon Total Knee System Tibial Baseplate All Polyethylene - Small, Medium, Large, Extra-Large
Polyethylene
Smith & Nephew Surgical Pty LtdSN322 Genesis II All Poly Tibial Base Left/Right Size 1-8SN388 Profix Tibial Base: All Poly Left/Right Size 1-6 10-20mmSN726 Genesis II All Poly PS Base, UHMWPE 1-8, 9-25mm thickness
Stryker Australia Pty LtdST647 Osteonics Knee System Tibial component All polyethylene cobalt 3, 5, 7, 9, 11, 13
chrome
ZimmerZI127 NexGen Knee Tibial Components Stemmed All Poly - Ti 1 - 10
PART A - Prostheses List by Category, Groups and Sponsor Page 302 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 3b - Cemented, Alloy, Modular
Advanced Surgical TechnologiesAD135 Advance Total Knee System Tibial base CoCr and titanium metal base 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 6
cemented
AD172 Advantim Total Knee System Tibial Primary Smooth/Finned Titanium 3" Length in Small-XlargeAD173 Advantim Total Knee System Tibial Primary Smooth/Finned Titanium 6" Length in Small-XlargeAD192 Ortholoc Modular Total Condylar Tibial Components Modular Stem Base Small, Small Plus, Medium, Medium Plus,
(Non Porous Coated) CoCr Large, Large Plus, Xlarge
AD216 ADVANCE Total Knee System Spiked tibial base - nonporous 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+AD218 ADVANCE Total Knee System Offset tibial base - nonporous 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+ in Left &
Right
Australian Surgical Design & Manufacture Pty LtdAE040 Active Knee System Tibial Component Cemented Sizes 1-5
Biomet Australia Pty LtdBI169 Maxim Complete Knee System Tibial Plate Primary, Cemented, Titanium 59-91mmBI177 Maxim Complete Knee System One Piece Revision Tibial Plate and Stem 59-91mm
Boss, Ti
BI810 Maxim Complete Knee System Tibial bearing & tray, ' Pop Top' Cruciate 51-91mm Also grouped in Knee Retaining, CoCr UHMWPE Group 3d
Corin Australia Pty LtdCR010 Rotaglide + Total Knee System, Tibial Latched, Cemented Ex Sml - Ex Lge
Component
De Puy AustraliaDP130 PFC Knee System Range PFC CK cemented or Modular Tibial Tray Size 1-6DP444 AMK Chrome CobaltTray Cemented CoCr Keeled tray and Porous Size 1-5 Also grouped in Knee
Coated trays Groups 3f, 3h, 3l
DP889 AMK Chrome CobaltTray Cobalt Chrome Tibial TEX or TX FX Size 1-5DY378 LCS Complete System Cemented Keeled or Cemented Tibial 1-6
Tray TiNi
Howmedica IncorporatedHW087 Duracon Total Knee System Tibial Baseplate Cemented - Vitallium Small, Medium, Large, Extra-Large
PART A - Prostheses List by Category, Groups and Sponsor Page 303 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW093 Duracon Total Knee System Tibial Baseplate Universal - Cemented - Small, Medium, Large, Extra-LargeVitallium
HW154 Kinemax Knee Tibial Component: Beadless - Vitallium XS, S, M, L, XL
Mathys AustraliaMA109 Balansys Tibial Base Plate Metal back 64mm - 85mm
Orthotech Pty LtdOH021 Optetrak Total Knee System Tibial Component Size 1 - 6
Smith & Nephew Surgical Pty LtdSN309 Genesis II Tibial Base Non Porous Titanium 1 - 8SN354 Genesis Tibial Base: Non Porous Left/Right Small- Magnum 8mm-15mmSN355 Genesis Tibial Base: Pegged Left/Right Small - MagnumSN390 Profix Tibial Non Porous Right/Left Size 1-7
Stryker Australia Pty LtdSK327 Triathlon Knee System Cemented tibial baseplate cobalt chrome Sizes 1 to 8ST066 Scorpio Tibial Tray Cemented 3, 5, 7, 9, 11, 13
ZimmerZI435 SAL Knee Tibial Baseplate - CoCr alloy 60/AOA to 92/E
Group 3c - Cemented, Alloy, Modular, PMMA coating
B Braun Australia Pty LtdBB204 Columbus TKS Tibial component T1 to T5
Global Scientific Pty LtdGS177 PLUS Knee Joint Prostheses System TC-PLUS Tibial Cementless 2 to 12 Also grouped in Knee
Group 3i
ZimmerZI073 Insall-Burstein II Femoral Component Tibial Tray - Ti 54 - 74mmZI102 Miller Galante II Stemmed Tibial Tray:Precoat - Ti A - KZI122 NexGen Knee Tibial Components Pegged Precoat - Titanium 1 - 10ZI125 NexGen Knee Tibial Components Stemmed Precoat - Titanium 1 - 10ZI126 NexGen Knee Tibial Components Stemmed Precoat AP Wedge - Ti 1 - 10
PART A - Prostheses List by Category, Groups and Sponsor Page 304 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI130 NexGen Knee Tibial Components Stemmed Fluted - Ti 1 - 10ZI413 Natural Knee Primary Tibial Baseplate -with Stem Size 00 to 5
Cemented - Ti alloy
Group 3d - Cemented, Alloy, Moulded polyethylene
Biomet Australia Pty LtdBI148 AGC Knee System Tibial Component, High Post Posterior 63-87mm
Stabilised, Chrome Cobalt, UHMWPE
BI153 AGC Knee System Tibial Component, Moulded, V2, 63-91mmUHMWPE, Chrome Cobalt
BI912 Maxim Complete Knee System Tibial bearing & tray, 'Pop Top' Posterior 51 - 91mm Stabilised, CoCr UHMWPE
Group 3f - Cemented, Alloy, for mobile insert
Australian Surgical Design & Manufacture Pty LtdAE044 Active Mobile Bearing Tibial Tray - Cemented Sizes 1-5
Biomet Australia Pty LtdBI196 Oxford Tricompartmental Knee System Tibial Component, Chrome Cobalt 63-87mmBI906 TRAC Knee System Tibial Tray CoCr 59 -91mm
De Puy AustraliaDP032 LCS Complete System MBT Cemented Keeled or Cemented Sizes 1 - 7
Tibial Tray
DP235 LCS Knee system Textured PCR or Rotating Platform or Std to Lge ++ Also grouped in Knee PCR tibial tray Chrome cobalt Group 3l
DP240 LCS Total Knee system Cemented Cruciate retention Tibial Std to Lge ++Chrome cobalt
DP519 LCS Universal Knee LCS Ultra Tibial Chrome cobalt Std - Lge+DY370 LCS Complete System MBT DuoFix CoCr or Universal Tibial 1-6 Also grouped in Knee
Trays HA on Porocoat Group 3m
Endotec Australia Pty LtdEA009 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Cemented Primary Tibial sizes 1-
Replacement System (Primary and Tibial components with mobile 6(inc)polyethelene inserts all polyethelene patella ceramic coated, titanium backed
PART A - Prostheses List by Category, Groups and Sponsor Page 305 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Link Orthopaedic AustraliaLO055 LINK T.A.C.K. Knee Hydroxyapaptite Coated (Hac): tibial tray Extra-small, small, medium & large Also grouped in Knee
Group 3m
Mathys AustraliaMA312 Balansys Mobile Base Plate Tibial Base Plate Mobile Bearing 64/8mm - 85/15.5mm Also grouped in Knee
Group 3l
Smith & Nephew Surgical Pty LtdSN369 Mobile Bearing Knee Tibial Base Non Porous Titanium Left & Right, Size 1-8
Stryker Australia Pty LtdST069 Scorpio Tibial Tray Mobile Bearing Cemented 3, 5, 7, 9, 11, 13ST913 Duracon Total Knee System Duracon ISA Mobile-Bearing CoCr Tibial Small, medium, large, X-large
Baseplate
Group 3g - Cemented, Alloy, for mobile insert, PMMA coating
Global Scientific Pty LtdGS178 PLUS Knee Joint Prostheses System TC-PLUS Tibial Cemented 2 to 12
ZimmerZI061 NexGen Tibial Components Stemmed - Titanium Sizes 1 - 10
Fluted Mobile Option
ZI129 NexGen Knee Tibial Components Stemmed MBK - Co Cr 1 - 10ZI415 Natural Knee Primary Tibial Baseplate - Mobile Bearing Size 00 to 5 Also grouped in Knee
Non Porous - CoCr alloy Groups 4f, 5b
Group 3h - Uncemented, Alloy, Modular
Advanced Surgical TechnologiesAD183 Advance Total Knee System Tibial base porous or HA titanium or 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+, 6AD193 Ortholoc Modular Total Condylar Tibial Components Stemless or Small, Small Plus, Medium, Medium Plus,
W/Modular Stem Base (Porous Coated) Large, Large Plus, Xlarge
AD215 ADVANCE Total Knee System Spiked tibial base - porous 1, 1+, 2, 2+, 3, 3+, 4, 4+, 5, 5+
Biomet Australia Pty LtdBI170 Maxim Complete Knee System Tibial Plate Primary, Uncemented, Titanium 59-91mm
PART A - Prostheses List by Category, Groups and Sponsor Page 306 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
De Puy AustraliaDP259 SROM Knee System Noiles Modular Tibial Base XSml-Xlge Also grouped in Knee
Groups 3j, 3l
Howmedica IncorporatedHW086 Duracon Total Knee System Tibial Baseplate Cementless - Vitallium Small, Medium, Large, Extra-Large
Smith & Nephew Surgical Pty LtdSN311 Genesis II Porous Tibial base Left/right Size 1-8SN356 Genesis Tibial Base: Porous Left/Right Small - MagnumSN391 Profix Tibial Porous Right/Left Sizes 1-7 w& w/o holes
Stryker Australia Pty LtdSK388 Triathlon Total Knee System Uncemented, porous beaded tibial Sizes 1 to 8
baseplate, primary, cobalt chrome
ST029 Scorpio Tibial Tray Cementless 3,5,7,9,11,13ST921 Osteonics Knee Prostheses Scorpio Tibial component - cementless - 3, 5, 7, 9, 11, 13
foam. Composition - cobalt chrome,
ZimmerZI086 Stemmed Tibial Tray:Porous Ti A - KZI103 Miller Galante II Other Tibial Tray:Porous Wedged - Ti A - KZI120 NexGen Knee Tibial Components Pegged Porous - Titanium 1 - 10ZI123 NexGen Knee Tibial Components Stemmed Porous - Titanium 1 - 10ZI412 Natural Knee Primary Tibial Baseplate with Stem Size 00 to 5 Also grouped in Knee
Porous - Ti alloy Group 11
Group 3i - Uncemented, Alloy, Modular, HA coating
Advanced Surgical TechnologiesAD189 Ortholoc Advantim HA Porous Coated Tibial base HA Ti Components Small, Small Plus, Medium, Medium Plus,
Knee System Large, Large Plus, Xlarge
Australian Surgical Design & Manufacture Pty LtdAE043 Active Knee System Tibial Component Cementless Sizes 1-5
B Braun Australia Pty LtdBB231 Columbus TKS Tibial Component - Cementless T1 - T5 Also grouped in Knee
Group 3m
PART A - Prostheses List by Category, Groups and Sponsor Page 307 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Biomet Australia Pty LtdBI186 Maxim Complete Knee System Tibial Tray, HA Coated, Ti 59 - 91mm
Corin Australia Pty LtdCR009 Rotaglide + Total Knee System, Tibial Latched, HAP Coat Ex Sml - Ex Lge Also grouped in Knee
Component Group 3m
De Puy AustraliaDP891 AMK Chrome CobaltTray Duofix Cobalt Chrome tibial Tray HA Size 1-5
Global Orthopaedic TechnologyGO005 RBK Total Knee System - Tibial base Porous and hydroxyapatite coating 1-5
Howmedica IncorporatedHW088 Duracon Total Knee System Tibial Baseplate Cementless with PA - Small, Medium, Large, Extra-Large
Vitallium with PA coating
HW094 Duracon Total Knee System Tibial Baseplate Universal - Cementless - Small, Medium, Large, Extra-LargeVitallium
Smith & Nephew Surgical Pty LtdSN312 Genesis II Tibial Base HA Coated Titanium Alloy Left & Right Size 1-8SN387 Profix Tibial Base HA Coated Porous Titanium Left/Right, Size 1-8
Alloy
Stryker Australia Pty LtdSK326 Triathlon Knee System HA coated tibial baseplate Sizes 1 to 8ST031 Scorpio Tibial Tray PA 3,5,7,9,11,13ST648 Osteonics Knee System Tibial component H/A cobalt chrome with 3, 5, 7, 9, 11, 13
HA coating
ZimmerZI121 NexGen Knee Tibial Components Pegged Porous HA/TCP - Titanium 1 - 10ZI124 NexGen Knee Tibial Components Stemmed Porous HA/TCP - Titanium 1 - 10
Group 3j - Uncemented, Alloy, Moulded polyethylene
Biomet Australia Pty LtdBI863 AGC Knee System Tibial Component, Moulded, V2 Porous (63-91) x (8-22)mm
coated UHMWPE, Chrome Cobalt, Ti
PART A - Prostheses List by Category, Groups and Sponsor Page 308 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI295 NexGen TM Monoblock Tibial Trabecular Meta (Tantalum) and Sizes 3 - 8, Height 10mm - 17mm
Ultrahigh Molecular Weight Polyethylene
Group 3l - Uncemented, Alloy, for mobile insert
Biomet Australia Pty LtdBI771 Oxford Tricompartmental Knee System Tibial component, Porous, CoCr, Ti 63-87mm Also grouped in Knee
Group 3m
BI908 TRAC Knee System Tibial Tray, Porous CoCr 59 - 91mm
De Puy AustraliaDP031 LCS Complete System MBT Porocoat Keeled or Porocoat Tibial Sizes 1 - 7DP163 PFC Knee System Range PFC Sigma Knee Offset Tibial Tray or Size 1-6 Also grouped in Knee
Modular Plus tibial Tray Group 11
DY377 LCS Complete System MBT Porocoat Keeled or Porocoat Tibial 1-6
Endotec Australia Pty LtdEA008 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP TKR Ultracoat Primary Tibial sizes 1-
Replacement System (Primary and Tibial components with mobile 6(inc)polyethelene inserts all polyethelene patella ceramic coated, titanium backed
Global Scientific Pty LtdGS211 PLUS SB Total Knee Replacement - Ti-Plasma Sprayed Tibial Component 2, 4, 6, 8, 10, 12
Uncemented Tibial Component
Orthotech Pty LtdOH156 Academia Knee CoCr, Titanium, Femoral, Tibial, Bearing, Tibial Base Plate 40-55
Stems & Patellar
Smith & Nephew Surgical Pty LtdSN370 Mobile Bearing Knee Tibial Base Porous Titanium Left & Right, Size 1-8
Stryker Australia Pty LtdST067 Scorpio Tibial Tray Mobile Bearing Cementless 3, 5, 7, 9, 11, 13ST924 Osteonics Knee Prostheses Scorpio Tibial component - mobile 3, 5, 7, 9, 11, 13
bearing - cementless - foam. Composition - cobalt chrome, titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 309 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI414 Natural Knee Primary Tibial Baseplate - Mobile Bearing Size 00 to 5
Porous - CoCr alloy
Group 3m - Uncemented, Alloy, for mobile insert, HA coating
Australian Surgical Design & Manufacture Pty LtdAE045 Active Mobile Bearing Tibial Tray - Cementless Sizes 1-5
B Braun Australia Pty LtdBB233 Emotion TKS Tibial Component - Cementless T1 - T8
Biomet Australia Pty LtdBI900 ROCC Knee Prosthesis Tibial Baseplate, uncemented, HA coated 1-8
or Porous HA coated, CoCr, Ti, HA,
BI909 Oxford Tricompartmental Knee System Tibial Component, Porous, HA Coated, 63 - 87mmCoCr, Ti, HAP
De Puy AustraliaDP035 LCS Complete System MBT DuoFix or Universal Tibial Trays Tibial sizes 1 - 7
HA on Porocoat
DY379 LCS Complete System MBT DuoFix or Universal Tibial Trays 1-6HA on Porocoat TiNi
Link Orthopaedic AustraliaLO052 LINK T.A.C.K. Knee Tibial cementless Extra-small, small, medium & large
Smith & Nephew Surgical Pty LtdSN368 Mobile Bearing Knee Tibial Base HA Coated Porous Titanium Left & Right Size 1-8
Stryker Australia Pty LtdST876 Scorpio Tibial Tray Mobile Bearing PA 3, 5, 7, 9, 11, 13ST934 Osteonics HA tibial Scorpio Tibial Tray - Mobile bearing 3, 5, 7, 9, 11, 13
cementless - PA. Composition - Coablt chrome - precipitated HA
Knee - Tibial Tray Component: Uni-Compartmental Knee Group 4.1 - Uncemented, monoblock implant
ZimmerZI452 Unispacer Knee System Spacer - special alloy insert Size 0 to 5, with 4 thicknesses
PART A - Prostheses List by Category, Groups and Sponsor Page 310 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 4a - Cemented, all polyethylene
Advanced Surgical TechnologiesAD206 Advance-Unicondylar Knee System All poly tibial component Sizes 1, 2, 3, 4 in 7mm, 8mm, 9mm,
Australian Surgical Design & Manufacture Pty LtdAE067 Active Uni Compartmental Knee Uni compartmental knee resurfacing All sizes for Tibial Component
prostheses, consisting of a Femoral component manufactured from Chrome Cobalt Molybdenum alloy, and a Tibial component manufactured from Ultra high Molecular Weight Polyethylene
De Puy AustraliaDY114 Preservation Miu Knee System MIU All Poly Tibials RM/LL and LM/RL 1, 7mm - 5, 11.5mm
Global Orthopaedic TechnologyGO031 Global re-surfacing uni-compartmental UHMWPE Size 1-5 6.5mm-9.5mm regular and Also grouped in Knee
knee tibial implant elongated plans Group 6a
Smith & Nephew Surgical Pty LtdSN337 Genesis Uni Tibial Base UHMWPE Left & Right, X Small- Magnum Plus,
8mm-15mm
Stryker Australia Pty LtdST054 EIUS Tibial Component Polyethylene XS, S, M, L, XLST056 Unix Unicompartmental Tibial All polyethylene 1, 2, 3, 4, 5
ZimmerZI108 Miller Galante Unicompartmental All Poly Tibial Tray - UHMWPE 40 - 56 mmZI402 Allegretto Unicompartmental Knee Tibia Allpoly - PE 9/38 to 15/48mm
Group 4b - Cemented, Alloy, modular
Advanced Surgical TechnologiesAD200 Advance-Unicondylar Knee System Metal-backed tibial component 1,2,3,4 in 10,11,12mm
Biomet Australia Pty LtdBI204 Repicci II Unicondylar Knee System Tibia Plate, Modular, Cemented, Titanium Std, Large, Xlarge
PART A - Prostheses List by Category, Groups and Sponsor Page 311 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
De Puy AustraliaDY118 Preservation Miu Knee System MIU Fixed Tibial Tray Porous or Mobile Size 1-5
RM/LL and LM/RL
Smith & Nephew Surgical Pty LtdSN336 Genesis Uni Tibial base Titanium Alloy XSmall-Magnum
ZimmerZI107 Miller Galante Unicompartmental Tibial Tray - Ti 40 - 56 mm
Group 4d - Cemented, Alloy, moulded polyethylene
Biomet Australia Pty LtdBI871 Vanguard unicondylar Knee System Tibial Component, CoCr UHMWPE (A-E) x (5-8)
Link Orthopaedic AustraliaLO060 LINK Endo-Model SLED Prosthesis Tibial Plateau, Metal Backed, Polyethylene 7mm-13mm in 45, 50, 55 diameter
ZimmerZI403 Allegretto Unicompartmental Knee Tibial Baseplate Monoblock - Ti alloy / PE 7.5/38 to 15/48mm
Group 4f - Cemented, Alloy, for mobile insert
Biomet Australia Pty LtdBI033 Oxford Meniscal Knee System Mark III Tibial Tray, Chrome Cobalt, (38-53mm) x sizes 26-34
Cemented
Corin Australia Pty LtdCR061 AMC Uni Condylar, Cemented Tibial Base AMC Uni Condylar Tibial Component Sizes 1 - 8 inclusive
Plate (CoCr) Cemented with Titanium Nitrite Ceramic Coating
De Puy AustraliaDY117 Preservation Miu Knee System MIU Fixed or mobile Tibial Tray Size 1-5
Cemented RM/LL and LM/RL
Group 4g - Cemented, Alloy, for mobile insert, PMMA coating
B Braun Australia Pty LtdBB201 Emotion TKS Tibial component T1 to T8, left and right
PART A - Prostheses List by Category, Groups and Sponsor Page 312 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Group 4i - Uncemented, Alloy, modular, HA coating
Smith & Nephew Surgical Pty LtdSN335 Genesis Uni Tibial Base HA coated Left & Right, X Small- Magnum Plus
Stryker Australia Pty LtdSK329 Unix unicompartmental knee system HA tibial tray, unicompartmental Sizes 1 to 4ST657 Unicompartmental Knee (Tibial Tray) Tibial tray cobalt chrome with HA coating 1, 2, 3, 4
Group 4l - Uncemented, Alloy, for mobile insert
Stryker Australia Pty LtdSK231 Eius Unicompartmental Knee System Tibial Tray CoCr XS, S, M, L, XL
ZimmerZI430 Natural Knee Unicompartmental -Tibia Baseplate - Ti Por 1 to Por 6
Group 4m - Uncemented, Alloy, for mobile insert, HA coating
Biomet Australia Pty LtdBI860 Oxford Meniscal Knee System Mark III Tibial Tray, HA or Porous (38-53) x (26-34)mm
coated, CoCr, HA, Ti.
Corin Australia Pty LtdCR057 AMC Uni Condylar Tibial Component - Tibial Base Plate, Cobalt Chrome, 1-8
Bonit Coat Titanium Nitrate Ceramic Coated, Bonit (Calcium Phosphate) Ingrowth Surface
Ligators
Device Technologies Australia Pty LtdDE059 Arthrex Meniscal Dart PLA 10mm - 14mmDE140 Bio-Fastak Composition - Poly (L-lactide-co-D, L- 3-11mm
lactide) with an insert molded eyelet of non-absorbable polyester suture
DE197 Bio - Fastak with Fibrewire suture 3mm x 11mmDE218 Arthrex Mini Bio-Anchor PLDLA, with Fibre Wire 2.4mm x 7mm
PART A - Prostheses List by Category, Groups and Sponsor Page 313 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mesh, Metallic
De Puy AustraliaDP426 Surgical Titanium Mesh System Mesh - Long/Oval 26 x 33mm x 50 - 90mmDP427 Surgical Titanium Mesh System Mesh - Curved or Long/Oval 14mm x 130mm or 17 - 22 x 22 - 28mm
x 50 - 150mm Hgt
DP430 Moss Miami (Stainless Steel) Washers - slotted, angled Slotted/Angled or 3-5mmDP436 Surgical Titanium Mesh System Mesh - Oval or Flat or Long/Round 17-22 x 22-28mm - 10-15mm Hgt or
90mm x 90mm or 10 - 16mm x 30 -
DP438 Surgical Titanium Mesh System Mesh - Oblong 12 - 13 x 15 -17mm x 10 - 20mmDY087 Surgical Titanium Mesh System End Plate or Screws or End Cap (Round / 17-22mm x 22-33mm
Oblong / Trapezoidal)
DY088 Surgical Titanium Mesh System Rings (Standard and Angled) 17-26mm x 22-33mm
Medtronic Sofamor Danek Australia Pty LtdSD006 Pyramesh Titanium Surgical Mesh 51 - 500mmSD007 Pyramesh Titanium Surgical Mesh 5 - 50mmSD079 Pyramesh Angled 25 - 150mmSD080 Pyramesh Curved 130mmSD081 Pyramesh Ovoid 8 - 70mmSD173 Pyramesh End ring/cap 10 - 25mm
Nails, Bone
AustofixAX001 Austofix Intramedullary Nail Humeral Nail, stainless steel 7mm and 8mmAX004 Austofix Intramedullary Nail Femoral & Tibial Nails, stainless steel 8mm, 9mm, 10mmAX005 Austofix Intramedullary Nail Supracondylar Nail, stainless steel 10mm & 13mm AX006 Austofix Intramedullary Nail Hip Nail, stainless steel 120 & 130 DegreeAX007 Austofix Intramedullary Nail Long Hip Nail, stainless steel 13/10mm
PART A - Prostheses List by Category, Groups and Sponsor Page 314 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AX008 Austofix Intramedullary Nail Proximal Tibial Nail, stainless steel 10/9mmAX009 Austofix Intramedullary Nail Custom Nails, stainless steel 5-13mmAX010 Austofix Intramedullary Nail F2 Cannulated Femoral Nail, stainless steel 11mm, 12mm, 13mmAX013 Proximal Humeral Nail Stainless Steel Diameter 8 mm, Length 170 mm
B Braun Australia Pty LtdBB053 BRAUN AUST Intramedullary Nails Targon Ti Tibial Nail Dia 8mm-9mm, Length 285mm-345mmBB054 BRAUN AUST Intramedullary Nails Targon Tibial Nail Dia 10mm-12mm, Length 285mm-BB055 BRAUN AUST Intramedullary Nails Targon Femoral Nail Dia 11mm-13mm, Length 360mm-BB107 BRAUN AUST Intramedullary Nails Nail for small bones Dia 3mm-8mm
Biomet Australia Pty LtdBI248 SST Small Bone Locking Nail Forearm Nail, Titanium 3.5mm x (180-260mm)BI249 SST Small Bone Locking Nail Screw, Distal Fixator, Titanium One size onlyBI250 SST Small Bone Locking Nail Set Screw w/holder, Titanium One size onlyBI251 SST Small Bone Locking Nail Nail End Cap, titanium low profile, one size onlyBI252 SST Small Bone Locking Nail Fibula Nail, titanium (3.5, 4.5mm) x 150mmBI281 Femoral Interlocking Nail Nail, Interlocking, Titanium (10-15mm) x (300 - 440mm)BI282 Femoral Interlocking Nail Screws, Femoral Nail, Titanium 5mm x (25-70mm)BI283 Femoral Interlocking Nail Screws, Femoral Nail, Titanium 6.4mm x (70-120mm)BI284 Femoral Interlocking Nail Screws, Femoral Nail, Titanium 6mm x (30-100mm)BI285 Femoral Interlocking Nail Femoral Nail End Cap 10-11mm & 12-16mmBI286 Uniflex Tibial Nail Tibial Nail, Titanium 8-14mm x 240-420mmBI287 Uniflex Tibial Nail Tibial Nail Transverse Screw, Titanium 4.0, 5.0mm x (20-70mm)BI288 Uniflex Tibial Nail Tibial Nail, Ti 8 - 9mm x (240-380mm)BI289 Uniflex Tibial Nail Tibial Nail, Ti 10 - 11mm x (240-420mm)BI290 Uniflex Tibial Nail Screw, Tibial Nail, Ti 4 - 5mm x (20-70mm)BI291 Uniflex Tibial Nail Nail, End Cap, Ti 4 - 18mm diameterBI292 Humeral Nail Humeral Nail, Titanium 8.0- 9.0mm x (180-280mm)BI293 Humeral Nail Screws, Transverse Humeral Nail, Titanium (4.0-4.5mm) x (16-46mm)
PART A - Prostheses List by Category, Groups and Sponsor Page 315 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI294 Humeral Nail Nail, Humeral, Titanium (8.0- 9.0mm) x (180-280mm)BI295 Kuntscher Cloverleaf Medullary Nails Stainless Steel 6-12mm x (140-520mm)BI296 Kuntscher Cloverleaf Medullary Nails Stainless Steel 13-16mm x (280-520mm)BI297 Kuntscher Cloverleaf Medullary Nails Stainless Steel 17-20mm x (300-750mm)BI299 Kuntschner Y Nail Stainless Steel 1.0-3.0mm x (100-310mm)BI803 ST Pro Nailing System End cap, stainless steel Dia 8-16mmBI804 ST Pro Nailing System Fixation screws, stainless steel Fully threaded - dia 4-6mm, 20-100mm
length; Partially threaded - dia 6.4mm, length 70-120mm
BI805 ST Pro Femoral Nail Cannulated, stainless steel Dia 10-16mm, length 260-520mmBI806 ST Pro Humeral Nail Solid, stainless steel Dia 8-9mm, length 180-280mmBI807 ST Pro Tibial Nail Cannulated, solid, stainless steel Dia 8-11mm, length 240-420mm
De Puy AustraliaDP528 Nancy Nail System Pediatric Flexible Nail 2.5 or 3.0 mm x 190 -290mmDP529 Nancy Nail System Pediatric Flexible Nail 3.5 mm x 270-350mmDP531 Nancy Nail System Pediatric Flexible Nail 4.0 mm x 330-450mmDY323 Ace Trochanteric Nail Trochanteric Lag Screw Sterile 60 to 120mmDY324 Ace Trochanteric Nail Trochanteric Anti Rotation Screw Sterile 60 to 100mmDY325 Ace Trochanteric Nail Trochanteric End Cap Sterile 5 to 25mmDY326 Ace Trochanteric Nail Trochanteric Nails Sterile in Standard or 320 x 11 x 130 up to 420 x 13 x 130 or
Left or Right 125 to 140 Deg from 9 to 13mm dia
Device Technologies Australia Pty LtdDE061 Fixion Nailing System Stainless Steel 18x 6.7mm - 440 x 12mmDE095 Fixation IM Nail - Proximal femur Stainless steel Dia 10 x 220mm, length 12 x 380mmDE096 Fixion IM nail - Humeral Stainless steel Dia 6.7 - 8.5mm (reduced), length 180 -
280mm
Howmedica IncorporatedHW370 Supracondylar Nail SCN - Orthinox 170,200,230,260, 280,300,320 mm
length x11mm width
HW371 Supracondylar Nail Condyle Screw - Orthinox 40 - 90mmHW372 Supracondylar Nail Nut for Condyle Screw - Orthinox One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 316 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mathys AustraliaMA043 AO/ASIF Intermedullary Nails Tibial Nail 9/200mm - 15/500mmMA073 AO/ASIF Intermedullary Nails Femoral Nail 7.0mm-19mm dia 200-600mm lengthMA090 AO/ASIF Intermedullary Nails Proximal femoral nail 10-12mm / 125 - 130 deg/ 240-420mm
length / left & right / 6.5mm hip pin 55-120mm length/ remoral neck screw 80-120mm /end cap
MA097 AO/ASIF Intermedullary Nails Cannulated nail - tibial / femoral 7.0mm-19mm dia 200-600mm lengthMA114 Distal Femoral Nail Solid & cannulated - (& end cap) 9 - 12mm / solid & cann / 160 - 420mm
L/ 6mm locking bolt DFN/ spiral blade 50 -100mm
MA115 Titanium Elastic Nail - 2.0mm dia - 4.0mm diaMA203 AO/ASIF Intermedullary Nails Femoral reamed 10 - 19mm , length 300 - 480mm.MA204 AO/ASIF Intermedullary Nails Proximal sleeve Standard 130 deg antigrade, spiral bladeMA205 AO/ASIF Intermedullary Nails Nail end cap 0 - 30mmMA206 AO/ASIF Intermedullary Nails Spiral blade Length 20 - 120mmMA208 AO/ASIF Intermedullary Nails Tibial unreamed - steel 8 - 9 mm , length 255 - 420mmMA209 AO/ASIF Intermedullary Nails Tibial Nail 8 - 10mm , length 255 - 420mmMA210 AO/ASIF Intermedullary Nails Humeral Nail 6.0 - 12.0 mm length 100 - 400mmMA211 AO/ASIF Intermedullary Nails Arthrodesis - special manufacture Custom madeMA214 AO/ASIF Intermedullary Nails Sealing screw 0 - 20mmMA396 AO/ASIF Intermedullary Nails Proximal Femoral Nail - PFN 9-15mm dia / 120-150 deg / 200 -
500mm Length
MA397 AO/ASIF Intermedullary Nails 6.5mm Hip Pin 30-160mm LengthMA398 AO/ASIF Intermedullary Nails Femoral Neck Screw 40-200mm LengthMA399 AO/ASIF Intermedullary Nails End Cap 0.0 - 40.0mm LengthMA400 AO/ASIF Intermedullary Nails Distal Femoral Nail - DFN 9-15mm / 160-420mm LengthMA401 AO/ASIF Intermedullary Nails Locking Screws 20-150mmMA402 AO/ASIF Intermedullary Nails Spiral Blade 50-150mm LengthMA403 AO/ASIF Intermedullary Nails End Cap 0.0 - 40.0mm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 317 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA425 Antegrade Femoral Nail (AFN) & Synthes Antegrade Femoral Nail 477.xxxs AFN Diameter 9-18mm, Length 300-Associated Implants
MA426 Antegrade Femoral Nail (AFN) & Synthes Antegrade Femoral Nail AFN Hip Pin 6.5mm Diameter, Length Associated Implants 30-200mm
Orthotech Pty LtdOH138 Lima Humeral Nail Stainless steel Dia 7 - 8mm, length 200 - 300mm
Smith & Nephew Surgical Pty LtdSN494 Ender Nails - 3.5mmx22cm - 4.5mmx48cmSN495 Intermedullary Nailing System Foresight Locking Screw 2.7mm Diameter 8-18mm LengthSN496 Intermedullary Nailing System Foresight Nail 4-5mm Diameter 20-26cm LengthSN497 Intermedullary Nailing System Knee Fussion Nail, Stainless Steel 11x 65-75 & 12 x 65-85cmSN498 Intermedullary Nailing System Nail Cap One size onlySN499 Intermedullary Nailing System Revision, Ankle Fusion Nail 11mmx15cm -13x21cmSN500 Russel Taylor Delta II Femoral Nail 8mmx24cm - 10mmx38mmSN501 Russel Taylor Delta II Reconstruction Nail Left/Right 8mmx24cm - 9mmx38cmSN502 Russel Taylor Delta Reconstruction & Femoral Plus Left/Right 10-11 32-48mm.
Nails, Stainless Steel
SN503 Russel Taylor Delta Tibial & Tibial Pro Nails, Stainless 8 x 27-42mm 9 x 27-36mm. 10 x 32-48mm 11 x 32-48mm.
SN505 Russel Taylor Femoral/Tibial Interlocking Nails 11mmx28.5cm - 16mmx50cmSN507 Russel Taylor Humeral Nails 7-9 x 18-30cmSN509 Russel Taylor Intermedullary Hip Screw Nail (IMHS) Standard 10-16mm 21 cm length, Long
Stainless Steel 10-12mm Diameter Right& Left 34-42cm
SN510 Russel Taylor Intermedullary Supracondylar Nail, 11mmx15cm -13mmx25cm.Stainless Steel
SN515 Russel Taylor Reconstruction Nails, Stainless Steel 12mmx32cm -15mmx50cm.SN518 Russell Taylor Femoral Interlocking Retrograde Nail 11mmx30cm - 13mmx48cmSN746 Asian IMHS Intramedullary hip nail. Titanium 16.5cmSN747 Asian IMHS Intramedullary hip nail. Titanium 19cmSN748 Asian IMHS Intramedullary hip nail. Titanium 24-32cmSN763 IMHS CP Intramedullary Hip Nail, stainless steel 10 - 16mm x 19.5cm left and right
PART A - Prostheses List by Category, Groups and Sponsor Page 318 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN764 IMHS CP Intramedullary Hip Nail, stainless steel 10 - 14mm x 32 - 44cm left and right
Stryker Australia Pty LtdSK006 Stryker Trauma Locking Nail System Titanium - Humeral Nail Dia 7,8,9mm length 140 - 320mmSK199 Stryker Trauma Locking Nail System Proximal Humeral Nail Nail Left/RightSK200 Stryker Trauma Locking Nail System Proximal Humeral Nail Proximal Humerous End Cap Std, +2, +4SK201 Stryker Trauma Locking Nail System Proximal Humeral Nail Proximal Humerous Washer round/squareSK202 Stryker Trauma Locking Nail System SCN Diameter 11m - 14mm, Length 170mm -
240mm
SK203 Stryker Trauma Locking Nail System SCN Condyle Screws 5mm x (40mm-120mm)SK204 Stryker Trauma Locking Nail System SCN Nut for Condyle Screws 5mmSK205 Stryker Trauma Locking Nail System SCN End Cap 8mmSK214 Stryker Trauma Locking Nail System Reconstruction Nail Recon Nail Left/RightSK215 Stryker Trauma Locking Nail System Reconstruction Nail Recon Lag ScrewSK216 Stryker Trauma Locking Nail System Reconstruction Nail Blocking ScrewSK337 Stryker Trauma Locking Nail System Arthrodesis Nail - Knee Arthrodesis Nail Left/Right; 11.5mm and
13mm
ST035 Stryker Trauma Locking Nail System: Titanium One size onlyCompression Screw
ST043 Stryker Trauma Locking Nail System: Titanium 20-120mmLocking Screw with & without shaft
ST045 Stryker Trauma Locking Nail System: Titanium Standard, +5, +10, +15End Cap
ST046 Stryker Trauma Locking Nail System: Standard, Proximal & Distal; Titanium 8-15mm diameter; 240-420mm lengthTibial Nail
ST047 Stryker Trauma Locking Nail System: Titanium One size onlyCondyle Screw (including nut)
ST059 Stryker Trauma Locking Nail System: Titanium 13-15mm diameter; 240-480mm lengthFemoral Nail
PART A - Prostheses List by Category, Groups and Sponsor Page 319 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic External Fixation Systems
Device Technologies Australia Pty LtdDE231 MiniFix Finger Mini Fixator System One size onlyDE235 RadioFix Radial Fixator system One size Temporary approval,
pending review of product group
DE244 Poing Fix Wrist Fixator System One sizeDE245 Wrist Fixator PFII Wrist Fixator System One sizeDE246 MicroFix Finger Mini Fixator system One size
Pacific MedicalPM092 Orthopaedic External Fixation System - Complete System Sterile One size only
Radiolucent Wrist Fixator
PM095 Orthopaedic External Fixation System Screw Shaft Dia 3.0 - 6.0mm, Thread Dia 6.0 - 2.0mm, Total Length 40 - 260mm, Thread Length 15 - 100mm
PM097 Orthopaedic External Fixation System Osteotite Screw Shaft Dia 3.0 - 6.0mm, Thread Dia 6.0 - 2.0mm, Total Length 40 - 260mm, Thread Length 15 - 90mm
PM098 Orthopaedic External Fixation System - Metadiaphyseal Fixator One size onlyXcaliber External Fixator
PM099 Orthopaedic External Fixation System - Articulated Ankle Fixator One size onlyXcaliber External Fixator
PM100 Orthopaedic External Fixation System - Hybrid Fixator One size onlyXcaliber External Fixator
Orthopedic External Fixation Systems, Fracture
Biomet Australia Pty LtdBI697 Small Fragment Set Stainless Steel Screws 3.5, 4.0mm length, Sizes 10 - 60mmBI698 Small Fragment Set Stainless Steel Plates Plates 25 - 125mmBI775 EBI XFIX DynaFix System Distal radius fixator, wristfix, sterile, One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 320 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
De Puy AustraliaDP391 Ace External Fixator Pin Holder Bolt - Titanium 15mmDY218 Ace External Fixator Olive wire - stainless steel 1.5-1.8mmDY219 Ace External Fixator Wire bayonet point - titanium 1.5mmDY220 Ace External Fixator Olive wire bayonet point - stainless steel, 1.5 or 1.8mm
packet of 3
DY221 Ace External Fixator Wire bayonet point - stainless steel 1.8mmDY223 Ace External Fixator Ring, aluminium 1/3 ring small 6" diameterDY225 Ace External Fixator Ring, composite 1/3 ring largeDY226 Ace External Fixator Ring, composite 1/3 ring mediumDY227 Ace External Fixator Ring, composite 1/3 ring smallDY228 Ace External Fixator Threaded Rod, titanium 1/4" x 10cmDY229 Ace External Fixator Threaded Rod, titanium 1/4" x 15cmDY230 Ace External Fixator Threaded Rod, titanium 1/4" x 20cmDY231 Ace External Fixator Threaded Rod, titanium 1/4" x 25cmDY234 Ace External Fixator Titanium half pin thread 15-80mm, 155 x 5mm to 220 x 5mmDY236 Ace External Fixator Spacer with bolt, titanium 2.5-5mmDY237 Ace External Fixator Ring, aluminium 2/3 ring, large 10" diameterDY238 Ace External Fixator Ring, composite 2/3 ring, mediumDY240 Ace External Fixator Ring, aluminium 2/3 ring, small 6" diameterDY241 Ace External Fixator Ring, composite 2/3 ring, smallDY242 Ace External Fixator Stainless steel transfix pin 250/300 x 5mm with 40-70mm threadDY243 Ace External Fixator Titanium Transfix Pin 250/300 x 5mm with 40-70mm threadDY244 Ace External Fixator GRUB screw ACE/FISCHER, titanium 5mmDY245 Ace External Fixator TIP CapS, polyethylene 5mmDY246 Ace External Fixator Peg, titanium 5mmDY248 Ace External Fixator Adaptor rod, titanium 8mmDY249 Ace External Fixator Pin holder adaptor, aluminium 90"DY251 Ace External Fixator Anchor assembly, titanium One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 321 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY252 Ace External Fixator Articulation, titanium One size onlyDY253 Ace External Fixator Bolt clevis, titanium One size onlyDY256 Ace External Fixator Locking nut, titanium One size onlyDY257 Ace External Fixator Nut, stainless steel One size onlyDY258 Ace External Fixator Position pins I/C foot plate, titanium One size onlyDY259 Ace External Fixator Ring adapter bolt, titanium One size onlyDY260 Ace External Fixator Ring connector, titanium One size onlyDY262 Ace External Fixator Spherical nut and washer, titanium One size onlyDY263 Ace External Fixator U rings, aluminium One size onlyDY264 Ace External Fixator Universal joint, titanium One size onlyDY266 Ace External Fixator Wire bolt hinge, titanium One size onlyDY267 Ace External Fixator Wire fixation bolt, cannulated or slotted One size only
(stainless steel)
DY268 Ace External Fixator Connecting rod, aluminium X-Short, short, medium or longDY270 Ace External Fixator External fixator, aluminium One size onlyDY271 Ace External Fixator Ring adaptor, titanium One size only
Mathys AustraliaMA320 Orthopaedic External Fixator Systems Rod / Bar 2.0mm-15.0mm dia 20.0mm-445mm LMA321 Orthopaedic External Fixator Systems Curved rod - carbon fibre 11mmMA322 Orthopaedic External Fixator Systems Protective caps for rods, protection caps One size onlyMA325 Orthopaedic External Fixator Systems Rod/Bar 450mm length - 650mm LengthMA327 Orthopaedic External Fixator Systems Hybrid Rings 11mm diameter 1/4 ring - 205mm
diameter full ring
MA328 Orthopaedic External Fixator Systems Distractors and lengthening apparatus Mini - lengthening apparatus, mini - distractor/lengthening apparatus, medium and large distractor
MA329 Orthopaedic External Fixator Systems External fixator clamps, double clamp 4-6mm DiameterMA330 Orthopaedic External Fixator Systems External fixator clamps, transverse clamp 4-6mm DiameterMA331 Orthopaedic External Fixator Systems External fixator clamps, clamp or open 1.25-6mm DiameterMA332 Orthopaedic External Fixator Systems External fixator clamps, clamp for hybrid 1.8-11mm Diameter
PART A - Prostheses List by Category, Groups and Sponsor Page 322 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA333 Orthopaedic External Fixator Systems External fixator clamps, tube to 11mm Diametertube/universal clamp
MA334 Orthopaedic External Fixator Systems External fixator clamps, open/clip on 4-6mm DiameterMA335 Orthopaedic External Fixator Systems External fixator clamps, connecting 3-4mm DiameterMA336 Orthopaedic External Fixator Systems External fixator clamps, adjustable clamp 4.0mmMA337 Orthopaedic External Fixator Systems External fixator clamp components, 14mm diameter
threaded rod
MA338 Orthopaedic External Fixator Systems External fixator clamp components, spare 1.25-6.0mmMA339 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mm
knurled nut
MA340 Orthopaedic External Fixator Systems External fixator clamp components, spare 1.25-6.0mm screw
MA341 Orthopaedic External Fixator Systems External fixator clamp components, nut 11mmfor threaded rod
MA342 Orthopaedic External Fixator Systems External fixator clamp components, nut 1.25-6.0mmspring loaded
MA343 Orthopaedic External Fixator Systems External fixator clamp components, nut 1.25-6.0mmfor open adjustable clamp
MA344 Orthopaedic External Fixator Systems External fixator clamp components, nut 1.25-6.0mmfor fixation screw
MA345 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmholding sleeve with wing screw
MA346 Orthopaedic External Fixator Systems External fixator clamp components, 6mm, 40mmfixation screw
MA347 Orthopaedic External Fixator Systems External fixator clamp components, 6mm, 67mmfixation screw
MA348 Orthopaedic External Fixator Systems External fixator clamp components, 6mm, 85mmfixation screw
MA349 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmclamp for halo, oral rod
MA352 Orthopaedic External Fixator Systems External fixator clamp components, 12mm, L 360mmthreaded rod
MA353 Orthopaedic External Fixator Systems External fixator clamp components, 12mm, L 260mmthreaded rod
PART A - Prostheses List by Category, Groups and Sponsor Page 323 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA354 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmdouble joint, complete
MA355 Orthopaedic External Fixator Systems External fixator clamp components, Largeangled piece
MA356 Orthopaedic External Fixator Systems External fixator clamp components, 3.5-11.0mmangled piece
MA357 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmtransport nut with catch
MA358 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmclamp body with two nuts
MA359 Orthopaedic External Fixator Systems External fixator clamp components, vice 1.25-6.0mmMA360 Orthopaedic External Fixator Systems External fixator clamp components, vice 1.25-6.0mm
plate double
MA361 Orthopaedic External Fixator Systems External fixator clamp components, vice 1.25-6.0mmplate for open
MA362 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmintermediate piece
MA363 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmlocking sleeve for open
MA364 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmclamp body of open
MA365 Orthopaedic External Fixator Systems External fixator clamp components, angle 3mmMA366 Orthopaedic External Fixator Systems External fixator clamp components, 3mmMA367 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mm
sliding carriage, complete
MA368 Orthopaedic External Fixator Systems External fixator clamp components, halo 1.25-6.0mmwith visor
MA369 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmMA370 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mm
connecting tube
MA371 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmangled piece with nut
MA372 Orthopaedic External Fixator Systems External fixator clamp components, bar 1.25-6.0mmfor lower jaw for children
PART A - Prostheses List by Category, Groups and Sponsor Page 324 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA373 Orthopaedic External Fixator Systems External fixator clamp components, bar 1.25-6.0mmfor upper jaw
MA374 Orthopaedic External Fixator Systems External fixator clamp components, bar 1.25-6.0mmfor upper jaw
MA375 Orthopaedic External Fixator Systems External fixator clamp components, malar 1.25-6.0mm plates
MA376 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmsimple hook
MA377 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmknurled nut M23
MA378 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmsliding carriage
MA379 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmdouble joint
MA380 Orthopaedic External Fixator Systems External fixator clamp components, 1.25-6.0mmholding sleeve with wing screw
Pacific MedicalPM012 Orthofix External Fixation System Ankle Anodised aluminium and stainless steel One size only
Fixator
PM013 Orthofix External Fixation System Pennig Anodised aluminium and stainless steel One size only Wrist Fixator
PM061 Orthofix External Fixation System Elbow Anodised aluminium and stainless steel One size onlyFixator
PM062 Orthofix External Fixation System Hybrid Anodised aluminium and stainless steel One size only Fixator
PM063 Orthofix External Fixation System Knee Anodised aluminium and stainless steel One size onlyFixator
Smith & Nephew Surgical Pty LtdSN033 Distal Radius System Distal Radius External Fixation System, One size only
composition - carbon fibre, modular rod and clamp system
SN034 Hex Fix External Fixator System Composition either aluminium, graphile 6.4mm Diameter (65-125mm lengths)composile or stainless steel. System comprises of hex bar, clamps, spools and
SN035 Colles Gold External Fixator System Dynamic external fixator, anodised One size onlyaluminium for distal radius fractures
PART A - Prostheses List by Category, Groups and Sponsor Page 325 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN433 Half Pin Hex Fix, Stainless Steal 4-6mm x 20-80mmSN434 Half Pin Arrow 4-6mm x 20-80mmSN435 Half Pins Hex Fix Titanium 4-6mm x 20-80mmSN437 Hex Fix Pins Cancellous Crane Pin Threaded 5/8" - 1 1/4"SN708 Jet X Bar External Fixation Bar with Cap 100mm to 600mmSN709 Jet X Central Modular Versitile Ankle Fixation Frame 99mm to 158mm
Stryker Australia Pty LtdSK007 Hoffmann II External Fixation System Hoffmann II Compact - One size only
Compression/Distraction Rod
SK008 Hoffmann II External Fixation System Hoffmann II Compression/Distraction One size onlySK009 Hoffmann II External Fixation System Hoffman II Miami Post One size onlySK014 Hoffmann II Hoffmann II Mini- Linking Pivot for 2mm One size only
& 3mm pins
SK015 Hoffmann II Hoffmann II Mini- Shank Straight Pin 2, 3 mmHolder - for 1.5mm & 2.0mm pins
SK016 Hoffmann II Hoffmann II Mini- Shank 'T' Offset Pin 2mmHolder - for 1.5mm & 2.0mm pins
SK017 Hoffmann II Hoffmann II Mini- 3 Hole Vise One size onlySK018 Hoffmann II Hoffmann II Mini- Simple Swivel Clamp One size onlySK019 Hoffmann II Hoffmann II Mini- Insulated Smooth Vise One size onlySK020 Hoffmann II Hoffmann II Mini- Articulating Coupling 3x3, 2x3SK021 Hoffmann II Hoffmann II Mini- Adjustable Swivel One size onlySK045 Hoffmann II Hoffmann II Mini- Shank Offset Pin 2, 3mm
Holder - for 1.5mm & 2.0mm pins
SK117 Tenxor External Fixation System - Non-Olive tipped 1.5mm & 2.0mm To be funded where Kirschner Wires any or all K-wires used
in a procedure are used as an implant.
SK118 Tenxor External Fixation System - Olive tipped 1.5mm & 2.0mm To be funded where Kirschner Wires any or all K-wires used
in a procedure are used as an implant.
SK206 Hoffmann II External Fixation System Hoffmann II Micro Rod to rod coupling 3/3
PART A - Prostheses List by Category, Groups and Sponsor Page 326 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK207 Hoffmann II External Fixation System Hoffmann II Micro Rod to rod coupling 5/3SK208 Hoffmann II External Fixation System Hoffmann II Micro Pin to rod couplingSK209 Hoffmann II External Fixation System Hoffmann II Micro Multipin clampSK210 Hoffmann II External Fixation System Hoffmann II Micro 90 degree multipin clampSK211 Hoffmann II External Fixation System Hoffmann II Micro Carbon rods 3mm (30-120mm)SK212 Hoffmann II External Fixation System Hoffmann II Micro Stainless steel rods 3mm x (30-120mm)SK213 Hoffmann II External Fixation System Hoffmann II Micro K-wireSK217 Apex Pins Apex Pin Diameter 1.65mmSK364 Hoffman II External Fixation System Hoffman II Sterile Pre-Packs Sterile Tibia Kit Temporary approval,
pending review of product group
SK365 Hoffman II External Fixation System Hoffman II Sterile Pre-packs Sterile Ankle Kit Temporary approval, pending review of product group
SK373 Hoffman II External Fixation system Hoffman II MRI Pelvic Clamp Temporary approval, pending review of product group
SK374 Hoffman II External Fixation System Hoffman II MRI Posts 8mm and 5mm Temporary Approval, pending review of product grouping
SK375 Hoffman II External Fixation System Hoffman II MRI Coupling Pin to Rod, Rod to Rod, Tube to Rod, Pin Temporary approval, Clamp Assembly pending review of
product group
SK376 Stryker Plating System Numelock II Locking Plate System Proximal Tibia, Lateral and Medial, 4 hole to 11 holes, left and right
SK378 Hoffman II External Fixation System Hoffman II Sterile Pre-Packs Sterile Pelvic Kit Temporary approval, pending review of product group
SK390 Hoffman II External Fixation System Hoffman II MRI Compression/Dystraction Tube, Temporary approval, Dynamisation Tube pending review of
product group
SK393 Hoffman II External Fixation System Hoffman II MRI 8mm Connecting rod (100mm - 500mm), Temporary approval, 5mm Connecting rod (100mm - pending review of 500mm), Semi Circular Curve Rod product group
PART A - Prostheses List by Category, Groups and Sponsor Page 327 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK396 Hoffman II External Fixation System Hoffman II Compact Sterile Pre-Packs Sterile Wrist Kit Temporary approval, pending review of product group
ST878 Monticelli-Spinelli External Fixation Anodized metal alloy, three quarter ring Small, Medium, LargeST879 Apex Pins Stainless Steel Orthopaedic Pins 2mmST880 Apex Pins Stainless Steel Orthopaedic Pins 3mmST881 Apex Pins Stainless Steel Orthopaedic Pins 4mmST882 Apex Pins Stainless Steel Orthopaedic Pins 5mmST883 Apex Pins Stainless Steel Orthopaedic Pins 6mmST884 Apex Pins Stainless Steel Orthopaedic Pins 2 - 6mmST891 Hoffmann II External Fixation System Pin clamp assembly with no post One Size OnlyST892 Hoffmann II Compact External Fixation Pin clamp assembly with no post One Size Only
System
ST935 Hoffman II External Fixation System Anodised metal alloy, rod to rod coupling 8/8mmST936 Hoffman II External Fixation System Anodised metal alloy, pin to rod coupling 8/4, 5mmST937 Hoffman II External Fixation System Anodised metal alloy, 30 deg angled post, One size only
stainless steel
ST938 Hoffman II External Fixation System Anodised metal alloy, straight post, One size onlystainless steel
ST939 Hoffman II External Fixation System Anodised metal alloy, aluminium 8mm x 65-500mmconnecting rod
ST940 Hoffman II External Fixation System Anodised metal alloy, carbon connecting 8mm x 65-500mmST941 Hoffman II External Fixation System Anodised metal alloy, stainless steel 8mm x 65-500mm
connecting rod
ST942 Hoffman II External Fixation System Anodised metal alloy, curved aluminium Small, Medium, Largerod semi-circular
ST943 Hoffman II External Fixation System Anodised metal alloy, adjustable Long, shortconnecting rod
ST944 Hoffman II External Fixation System Anodised metal alloy, One size onlydynamization/distraction rod, compression/distraction rod, dynamization/distraction rod to rod
PART A - Prostheses List by Category, Groups and Sponsor Page 328 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST945 Monotube External Fixation System Anodized metal alloy, dynamic tube 15mmassembly yellow
ST946 Monotube External Fixation System Anodized metal alloy, dynamic tube 20mmassembly blue
ST947 Monotube External Fixation System Anodized metal alloy, dynamic tube 25mmassembly red
ST948 Monotube External Fixation System Anodized metal alloy, dynamic tube 15mmassembly yellow
ST949 Monotube External Fixation System Anodized metal alloy, dynamic tube 20mmassembly blue
ST950 Monotube External Fixation System Anodized metal alloy, dynamic tube 25mmassembly red
ST951 Monotube External Fixation System Anodized metal alloy, pin clamp yellow, 15, 20, 25mmblue, red
ST952 Monotube External Fixation System Anodized metal alloy, single pin clamp 15, 20, 25mmyellow, blue, red
ST953 Monotube External Fixation System Anodized metal alloy, T-Adapter yellow, 15, 20, 25mmblue, red
ST954 Monotube External Fixation System Anodized metal alloy, tube to tube clamp 15, 20, 25mm, 15/20mm, 20/25mmyellow, blue, red, yellow/blue, blue/red
ST955 Monotube External Fixation System Anodized metal alloy, hybrid clamp blue, One size onlyhybrid clamp red
ST956 Monotube External Fixation System Monticelli/Spinelli Ring Frame One size onlyST957 Monotube External Fixation System 3/4 ring blue, green and white 147mm, 165mm, 187mmST958 Monotube External Fixation System Monticelli/Spinelli Kirschner Wire Holder One size onlyST959 Monotube External Fixation System With sliding clamp One size onlyST960 Monotube External Fixation System With sliding clamp and spacer One size onlyST961 Monotube External Fixation System Carbon tube assembly yellow 015 150, 200, 250, 300mmST962 Monotube External Fixation System Carbon tube yellow 015 150, 200, 250, 300mmST963 Monotube External Fixation System Carbon tube blue 015 150, 200, 250, 300mmST964 Monotube External Fixation System Carbon tube red 015 150, 200, 250, 300mmST965 TenXor External Fixation System Anodized metal alloy, open ring 150, 180, 210, 250mmST966 TenXor External Fixation System Anodized metal alloy, ring clamp One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 329 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST967 TenXor External Fixation System Anodized metal alloy, wire post, pin post One size onlyST968 TenXor External Fixation System Anodized metal alloy, ring to monotube One size only
triax tube clamp
ST969 TenXor External Fixation System Anodized metal alloy, blue, red 20, 25mmST970 TenXor External Fixation System Anodized metal alloy, Monticelli Spinelli One size only
kirschner wire holder
ST971 TenXor External Fixation System Anodized metal alloy, with sliding clamp One size onlyST972 TenXor External Fixation System Anodized metal alloy,with sliding clamp One size only
and spacer
ZimmerZI484 Wristore Disposable External Fixation device for Wristore Pack Temporary approval,
the treatment of distal radial fractures. pending review of product group
Orthopedic External Fixation Systems, Other
Biomet Australia Pty LtdBI262 EBI XFIX Dynafix System Bone Screw, Cortical, tapered, 2.4mm to 6.00mm diameter
Cancellous, Stainless Steel
BI264 EBI XFIX Dynafix System Distal Radius Fixator, Dimension, One size onlyStainless Steel, Aluminium
BI265 EBI XFIX Dynafix System Hybrid Fixation System, Stainless Steel, Rings - 1/3, 2/3, Rotating, 100mm-Aluminium 220mm. Ring Bolt - Xsmall, adult. Ring
to fixator connector. Rotation adaptor - male, female, Xsmall, adult. Variable wire (1 size) or Variable Screw Carriage (fixed and angulating). Wire (1.6-2mm x 350-400mm). Washer (9 -12mm).
BI267 EBI XFIX Dynafix System Fixator Complete - includes T-Clamp, Standard, Small, Extra SmallCompression/Distraction, Dynamisation, Articulating Ankle Clamp
BI270 EBI XFIX Dynafix System Pelvic Fixator Screws, Stainless Steel, One size onlyAluminium
BI271 EBI XFIX Dynafix System Wire Straight or Olive with Washer, 160 or 200mm x (1.6 or 2.0mm)Chrome Cobalt
PART A - Prostheses List by Category, Groups and Sponsor Page 330 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI272 EBI XFIX Dynafix System Distal Radius Fixator, Wristfix, Stainless One size onlySteel, Aluminium
BI776 EBI XFIX DynaFix System OptiROM Articulating Fixator Complete Small and LargeBI777 EBI XFIX DynaFix System Mini fixator/lengthener with comp/dist Small, Medium, Long, 100mm, 150mmBI818 EBI XFIX Dynafix System Rail (Aluminium/Titanium) 100-420mmBI819 EBI XFIX Dynafix System Multi Axial Correction and Metaphyseal 4-8cm, Xsmall - Adult
Arc Module complete with T-clamp
BI823 Alveolar Ridge Distraction System - distraction device, single tooth 10-20mmBI824 Alveolar Ridge Distraction System - distraction device, multi tooth 10-20mmBI825 Alveolar Ridge Distraction System - Shim plate, titanium 1-3mmBI827 EBI XFIX Vision System Rod Clamps/Connector, stainless Dia 9.5mm
steel/aluminium
BI828 EBI XFIX Vision System Clamp/Rod, stainless steel/aluminium 4mm/6mm, 3-5 hole, 50-150mmBI829 EBI XFIX Vision System Screw, Transfixing, Stainless steel 4 - 6mm diameterBI830 EBI XFIX Vision System Ring Connector Assembly, stainless 1 or 2 bolt model
steel/aluminium
BI831 EBI XFIX Vision System Post, Bone Screw, Telescoping, stainless One size onlyBI832 EBI XFIX Vision System Rods, Bars, stainless Dia 9.5mm, 150-400mm length
steel/aluminium/carbon fibre
BI849 EBI XFIX DynaFix System OptiROM Passive Distractor Module One Size OnlyBI850 EBI XFIX DynaFix System Hip Distractor Aluminium, Stainless Steel, One Size Only
Titanium
BI851 EBI XFIX Dynafix System Clamp (Straight, Transport, Rotational T- Ex Small, Small, Adult, 4-6mmclamp, Adaptor, Lenghtener, Shim, Single)
BI852 EBI XFIX Dynafix System Clamp (Rotational Serrated T-clamp, Ex Small, Small, Adult, 4-6mmSwivel, Translational, Uniplaner, CD)
BI853 EBI XFIX Dynafix System CD Clicker Ex Small, Small, Adult, 5-20cmBI854 EBI XFIX Dynafix System Rail Accessory (Adaptor, CD Support, Ex Small, Small, Adult, 4-6mm
Dynamization, Bridge)
BI855 EBI XFIX Dynafix System Wrench Ex Small, Small, Adult, 4-6mmBI856 EBI XFIX Dynafix System Rail (Carbon Fiber) 100-420mm
PART A - Prostheses List by Category, Groups and Sponsor Page 331 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW328 Howmedica Dynamic Joint Distractor Complete Straight Body Frame - One size only
Stainless Steel
Smith & Nephew Surgical Pty LtdSN031 Original Ilazarov System External circular fixation system, stainless Adult and Paediatric
steel and composite carbon fibre
SN146 Taylor Spatial Frame Pre-assembled circular external fixator, One size onlycarbon-fibre rings, telescopic rods
SN436 Half Pins Ilizarov Stainless Steel 4 x 120 -180mm 30mm 35mm - thread 50mm conic
SN439 Ilizarov Jurgan Pin Balls 0.7-5.0mmSN440 Ilizarov Wires 300-370 length x 1-1.8mm diameterSN441 Ilizarov Wires with stopper 300-370 length x 1-1.8mm diameter
Stryker Australia Pty LtdSK183 Leibinger Intraoral Distractor (Multiguide Manufactured from stainless steel, allows Frame 20mm - 35mm, 2.0mm diameter,
gradual, independent, and simultaneous 50 - 90 mm length Auto - Pilot Pinsdistraction of the mandible in 3 planes.
ST885 Howmedica Dynamic Joint Distractor Y Body Assembly - Stainless Steel One size onlyST886 Howmedica Dynamic Joint Distractor Pin Stop Collar - Stainless Steel One size onlyST887 Howmedica Dynamic Joint Distractor Pin to Rod Coupling - Stainless Steel One size onlyST888 Howmedica Dynamic Joint Distractor Complete Y Body Frame - Stainless Steel One size onlyST889 Howmedica Dynamic Joint Distractor Straight Body Assembly - Stainless Steel One size only
Orthopedic External Fixation Systems, Spinal
Medtel Australia Pty LtdME159 AcuFix 2 segment ThinLine plate 34 - 54mm
Orthopedic Internal Fixation Systems
De Puy AustraliaDY442 Summit SI System Polyaxial Screw - Mini Favoured Angle 3.5 or 4mm diameter x 12-48mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 332 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY443 Summit SI System Connectors VariousDY444 Summit SI System Inner Set Screw one sizeDY456 Expedium Spine System Washers Various
Orthopedic Internal Fixation Systems, Fracture
Advanced Surgical TechnologiesAD101 LOCON-T Radius Plating System Stainless steel cortical bone screw 1.8, 2.7, 3.5mm dia x 6 - 40mm length in
2mm increments
AD102 LOCON-T Radius Plating System Stainless steel volar plate, left and right 1.2 - 1.5mm thick, left and right - small, distal plates, lateral plate extender medium, large
AD207 LOCON-T Radius Plating System Stainless Steel Lateral Plate Extender One size only
Biomet Australia Pty LtdBI253 BMP Cable System Cable Chrome Cobalt 1.6mm or 2.0mmBI254 BMP Cable System Cable Sleeve, Chrome Cobalt, Stainless One Size onlyBI255 BMP Cable System Trochanteric Grip, Chrome Cobalt 1.6mm or 2.0mmBI256 BMP Cable System Cable, Stainless Steel 1.6mm or 2.0mmBI258 BMP Cable System Dynamic Compression Plate, 3 hole, One size only
Stainless Steel
BI259 BMP Cable System Dynamic Compression Plate, 5 hole, One size onlyStainless Steel
BI260 BMP Cable System Dynamic Compression Plate, 7 hole, One size onlystainless steel
BI261 BMP Cable System Dynamic Compression Plate, 9 hole, One size onlyStainless Steel
BI768 Mandibular Fracture System Screw, IMF 2./2.4 Mandibular Fracture, 2.0 x (9-13)mm Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI769 Mandibular Fracture System Screw, IMF, 2.0/2.4 Mandibular Dia 2.0 x 5.0, 7.0mm length Only to be funded Fracture, Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 333 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Corin Australia Pty LtdCR046 FixClip Stainless Steel Clip to hold Wires, Screws 0.75mm - 4mm
& Nails
De Puy AustraliaDP330 Tibial Nail System Tibial Nail or Dynamic Tibial Nail 8-13mm x 25.5-42.5cm
Titanium Unsterile or Sterile
DP331 Tibial Nail System End Cap Titanium One size onlyDP338 Tibial Nail System Solid Cortical Titanium Screw Unsterile 6.5mm x 20 -120mm
or Sterile
DP339 Femoral Nail End Cap Titanium One size onlyDP342 Femoral Nail System Solid Cortical Screw Titanium Sterile or 4.5 or 5.5mm x 20-80mm
Unsterile
DP343 Femoral Nail System Femoral Nail Titanium Sterile or Unsterile 9-15mm x 30- 50cm DP366 Supacondylar Nail System Solid End Cap Titanium Unsterile or Sterile One size onlyDP367 Humeral Nail System Humeral Nail Titanium Sterile or Unsterile 7-9mm x 22cm-30cmDP371 Humeral Nail System End Cap Various Titanium Unsterile or One size onlyDP571 Art Retrograde Nail Femoral Nail Titanium Unsterile or Sterile 9 -12mm x 30 - 50cmDP590 Compression Hip Screw 6.5mm Solid Lag Screw Stainless Steel 22mm Thread length 40 to 100mmDP592 Small / Large Fragment Set Cannulated Cancellous Lag Screw Titanium 6.8 or 8mm Dia 25-120mm Length 22 or
40mm Thread
DP593 Small / Large Fragment Set Cannulated Cancellous Screw 4mm or 16mm or 32mm Thread, 26-120mm Length
DP597 Small / Large Fragment Set Solid Cortical Screw Titanium 3.5 mm 10-48 mm LengthDP598 Small / Large Fragment Set Cannulated Cortical. Bone Screw 3.5 mm length 50-60 mmDP605 Small / Large Fragment Set Cancellous Lag Screw Titanium 4.8 mm Dia 30mm to 60mmDP608 Small / Large Fragment Set Straight Plate Titanium 3-12 HoleDP609 Small / Large Fragment Set 100 Tube Plate Titanium 3.5mm Dia and 3 to 8 holesDP610 Small / Large Fragment Set S/S Femoral Condylar Plate 4-8 Hole DP611 Small / Large Fragment Set Reconstruction T Plate Titanium 4-8 HoleDP612 Small / Large Fragment Set Active Compression Plate Titanium 3.5mm 5 to 10 HoleDP613 Small / Large Fragment Set Humeral and Radial Plate Titanium Wide - Narrow - Long - Extra Long
PART A - Prostheses List by Category, Groups and Sponsor Page 334 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP615 Small / Large Fragment Set Universal Reconstruction Ribbon 3.5mm with 8 to 10 holesDP617 Small / Large Fragment Set Universal Reconstruction Ribbon 3.5mm with 14 holesDP618 Small / Large Fragment Set Universal Reconstruction Ribbon 3.5mm with 3 to 7 holesDP627 Small / Large Fragment Set Solid Cancellous Screw Titanium 4mm or 5mm Dia 10-48 mm LengthDP632 Small / Large Fragment Set Solid Cancellous Screw Titanium 5.0mm Length 50 - 80mmDP635 Small / Large Fragment Set Solid Cancellous Lag Screw Partial 4mm Dia 10-60mm Length
Thread Titanium
DP638 Small / Large Fragment Set Solid Cancellous Bone Screw Full Thread 4mm Dia 50-110mm Length Titanium
DP640 Small / Large Fragment Set Cancellous Cannulated Lag Screw Partial 4mm 10 to 70mm Length Thread
DP643 Small / Large Fragment Set Cannulated Cancellous Screw Full 4mm or 7mm x 10 -100mm LengthThreaded - Stainless Steel
DP646 Small / Large Fragment Set Washer Titanium - Flat/Cup/Countersink One size onlyDP650 Small / Large Fragment Set S/S Cortical Screw - Stainless Steel 1.5 or 2 or 2.7 or 3.5mm x 22 - 44mm DP654 Small / Large Fragment Set S/S Cortical Screw Diameter - Stainless Steel 3.5 or 4.5 x 12 - 48mm LengthDP655 Small / Large Fragment Set S/S Cortical Self Tapping Screw 3.5 or 4.5 mm x 8-60 mm LengthDP656 Small / Large Fragment Set S/S Malleolar Stainless Steel Screw - Stainless 25 - 70mm
Steel
DP657 Small / Large Fragment Set S/S Malleolar Cann Cor Stainless Steel Screw 25 - 70mm- Stainless Steel
DP658 Small / Large Fragment Set S/S Cortical Stainless Steel Cannulated Screw 3.5 x 8-70 mm - Stainless Steel
DP660 Small / Large Fragment Set S/S Cannulated Screw Diameter partially Dia 4 x 10-60threaded - Stainless Steel
DP662 Small / Large Fragment Set S/S Cannulated Cancellous Screw 16 or 32 6.5mm x 25-140mm LengthDP663 Small / Large Fragment Set S/S Cannulated Cancellous Screw Part 4mm or 6.5mm x 10- 140mm Length
Thread Screw
DP664 Small / Large Fragment Set S/S Cannulated Cancellous Screw 16 or 32 7mm x 25-140mm LengthDP665 Small / Large Fragment Set S/S CHS Compression Screw - Stainless Steel Neutral to +2DP668 Small / Large Fragment Set S/S CHS Lag Screw Stainless Steel Sterile Length 50-145mm
and Unsterile
PART A - Prostheses List by Category, Groups and Sponsor Page 335 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP670 Small / Large Fragment Set S/S Tronchanteric Support Plate Small-LargeDP672 Small / Large Fragment Set S/S CHS Plate Standard & Short Barrel 2-8 Hole 95 to 150 DegDP673 Small / Large Fragment Set S/S SCS Plate Sterile 3-9 HoleDP675 Small / Large Fragment Set S/S Broad Bone Plate Stainless Steel 3-6 Hole for 1.5mmDP678 Small / Large Fragment Set S/S Small or Narrow DCP Plate 2.7mm or 3.5mm with 2 - 12 HoleDP683 Small / Large Fragment Set S/S Cerclage Wire Loop Stainless Steel 0.8-1.2mm x 280-600DP689 Small / Large Fragment Set S/S Condylar Plate & Mini Condylar Plate 1.5mm or 2mmDP692 Small / Large Fragment Set S/S Cloverleaf Plate Stainless Steel 3-4 HoleDP693 Small / Large Fragment Set S/S T-Plate Stainless Steel 3 up to 8 HoleDP695 Small / Large Fragment Set S/S Y-Plate Stainless Steel 2 + 2 + 4 or 4 + 4 + 4 SlotsDP696 Small / Large Fragment Set S/S Plates - Mini T or L, Oblique, Straight 2.0mm or 2.7mm with 2-12 HoleDP701 Small / Large Fragment Set S/S Bored K/Wire Stainless Steel 2.0-3.0mm x 80/30-200-15DP702 Small / Large Fragment Set S/S Threaded K/Wire 1.5-2.5mmDP705 Small / Large Fragment Set S/S Reconstruction Plate 3.5mm 3-12 HoleDP708 Small / Large Fragment Set S/S Reconstruction Plate 3.5mm 14 to 18 HoleDP709 Small / Large Fragment Set S/S Reconstruction Plate 3.5mm 20-28 HoleDP714 Small / Large Fragment Set S/S Reconstruction Plate 2.7mm 8-26 HoleDP719 Small / Large Fragment Set S/S Reconstruction Plate 4.5 - 6.5mm 3-8 HoleDP723 Small / Large Fragment Set S/S Reconstruction Plate 4.5 - 6.5mm 9 - 18 HoleDP725 Small / Large Fragment Set S/S Cortical Screw Diameter 3.5 or 4.5 x 55 - 110mmDP733 Small / Large Fragment Set S/S Angle Blade Plate DCP Stainless Steel 95 Degrees 14-18 HoleDP734 Small / Large Fragment Set S/S Angle Blade Plate DCP 95 Degrees 5 - 12 HoleDP735 Small / Large Fragment Set S/S Angle Blade Plate Stainless Steel 95 Degrees 45mm x 8mmDP737 Small / Large Fragment Set S/S Angle Blade Plate 90 Degrees 35-50mm x 8-10mmDP739 Small / Large Fragment Set S/S Angle Blade Plate 90 Degrees 60 to 65 x 10-15mmDP741 Small / Large Fragment Set S/S Broad DCP Plate 6 to 10 HoleDP744 Small / Large Fragment Set S/S Broad DCP Plate 11 to 14 HoleDP746 Small / Large Fragment Set S/S Broad DCP Plate 16 to 17 Hole
PART A - Prostheses List by Category, Groups and Sponsor Page 336 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP749 Small / Large Fragment Set S/S Broad DCP Plate 18 to 26 HoleDP753 Small / Large Fragment Set S/S Blade Plate Stainless Steel 95 Degrees 5-6 HoleDP754 Small / Large Fragment Set S/S Cannulated Screw Diameter 4mm x 10-60mm LengthDP758 Small / Large Fragment Set S/S Cerclage 0.8-2.5mm D898DP759 Small / Large Fragment Set S/S Washer Spiked, Standard, Cancellous, One size only
Cortical & Fastening Wire
DP761 Small / Large Fragment Set S/S Cancellous Screw 4mm Dia and 10 - 28 LengthDP766 Small / Large Fragment Set S/S Cancellous Screw 32 Thread - Stainless Dia 6.5mm x 130-140mmDP772 Small / Large Fragment Set S/S Cancellous Screw 6.5mm x 14-110mm LengthDP774 Small / Large Fragment Set S/S Cancellous Screw 16 or 32 Thread 6.5mm x 25 - 130mm LengthDP776 Small / Large Fragment Set S/S CHS Plate Standard & Short Barrel 10 Hole 135-150 Deg
Sterile or Unsterile
DP777 Small / Large Fragment Set S/S CHS Plate Standard & Short Barrel 12 Hole 135-150 Deg Sterile or Unsterile
DP778 Small / Large Fragment Set S/S CHS Plate Standard & Short Barrel 12-14 Hole 135-150 DegSterile or Unsterile
DP780 Small / Large Fragment Set S/S CHS Plate Standard & Short Barrel 5-14 Hole 135-150 DegSterile or Unsterile
DP784 Small / Large Fragment Set S/S CHS Plate Stainless Steel 16 Hole 135-150 Deg DP786 Small / Large Fragment Set S/S Cortical Screw Self Tapping 3.5 or 4.5 x 30 - 110mm LengthDP793 Small / Large Fragment Set S/S K/Wire Stainless Steel 0.8 to 3.0 mm x 6-9" or 150-500mmDP796 Small / Large Fragment Set S/S Narrow Bone Plate 5-18 HoleDP802 Small / Large Fragment Set S/S Small or Narrow DCP Plate 2.7mm or 3.5mm 8-16 HoleDP809 Small / Large Fragment Set S/S K-wire standard 1/8 inchDP810 Small / Large Fragment Set S/S K-Wire Double Point each 5/32 inchDP812 Small / Large Fragment Set S/S SCS Plate Sterile 10-12 Hole 95 DegreesDP813 Small / Large Fragment Set S/S SCS Plate Sterile 14-16 Hole 95 DegreesDP814 Small / Large Fragment Set S/S Threaded Steinmann Pin 0.5-3mmDP820 Small / Large Fragment Set S/S Cortical Screw Diameter 3.5 or 4.5 x 45 -100mmDP835 Peak Channelled Plate System Channel Plate 2 - 8 Segment
PART A - Prostheses List by Category, Groups and Sponsor Page 337 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP836 Peak Channelled Plate System Channel Plate Locking Washer 9 x 13mmDP837 Peak Channelled Plate System Cortical Bone Screw 3.5mmDP929 Supacondylar Nail System Supracondylar Titanium Nail Sterile or 10 to 12 mm x 15-30cm
Unsterile
DP931 Small / Large Fragment Set S/S Solid Cortical Screw Titanium 6.5mm x 40 - 100mmDY131 Small / Large Fragment Set Low Profile Cannulated Cancellous 4mm x 10mm - 48mm Length
Screw, Partially Thread
DY162 Fragment Set Small/Large Low Profile Cannulated Cancellous 4mm x 50 - 75mmScrew, Partially Thread
DY164 Small / Large Fragment Set Low Profile Cannulated Cancellous 4mm x 10 - 50mm LengthScrew, Fully Thread
DY165 Fragment Set Small/Large Low Profile Cannulated Cancellous 4mm x 55 - 75mmScrew, Fully Thread
Howmedica IncorporatedHW261 Alta Modular Trauma System CFX - Titanium - complete 11, 13, 15mm width, 300-480mm lengthHW262 Alta Modular Trauma System Rod - Titanium 11, 13, 15mm width, 300-480mm lengthHW263 Alta Modular Trauma System Distal Screws - Titanium 5mm x 14-100mmHW264 Alta Modular Trauma System Proximal Screws - Titanium 6 - 5mm x 25-100mmHW265 Alta Modular Trauma System Cap Screws - Titanium One size onlyHW266 Alta Modular Trauma System - complete Channel Plate and 10 Cortical Screws - 4,6,8 hole
procedure costs Titanium
HW267 Alta Modular Trauma System - complete Distal Fracture plate and Channel plate 6,8 holeprocedure costs with Screws - Titanium
HW268 Alta Modular Trauma System - complete Femoral Rod and 4 Cross Screws - 10-16mm x 280-480mmprocedure costs
HW269 Alta Modular Trauma System - complete Femoral Rod , Rod Connector, Lag and 10-16mm x 280-480mmprocedure costs Cross Screws - Titanium
HW270 Alta Modular Trauma System - complete Hip Bolt and Channel Plate Assembly with 130-150 Degrees, 3 Holeprocedure costs Lag Screw and 6 cortical screws -
HW271 Alta Modular Trauma System - complete Supraconondylar Plate with Lag Screw 95 Degrees, 3 Holeprocedure costs and Screws - Titanium
HW272 Alta Modular Trauma System - complete Tibial/Humeral Rod, Cross Screws, Tab 6-14mm x 210-420mmprocedure costs and cap screw - Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 338 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW273 Alta Modular Trauma System - Compression Screw Assembly - 5mmHW274 Alta Modular Trauma System - Cortical Screw/Screw Nut Assembly - 5mm
Titanium
HW275 Alta Modular Trauma System - Dome and Doulock Plunger - Titanium 40-120mmHW276 Alta Modular Trauma System - Plate - Channel - Titanium 4,6,8 holeHW277 Alta Modular Trauma System - Plate - Distal Fracture - Titanium 6,8 HoleHW278 Alta Modular Trauma System - Plate - Proximal Angled - Titanium 130-150 degrees, 4 holesHW279 Alta Modular Trauma System - Plate - Small Bone - Titanium 4,6,8 holesHW280 Alta Modular Trauma System - Plate - Supracondylar - Titanium 95 degrees, 3 holesHW281 Alta Modular Trauma System - Plate Connector - Titanium One size onlyHW282 Alta Modular Trauma System - Rod Connector and Locking Shoe - 13 & 15mmHW283 Alta Modular Trauma System - Rod - Femoral - Titanium 9,10,11,12,13,14,15,16mm width, 280-
480mm length
HW284 Alta Modular Trauma System - Rod -Tibial/Humeral - Titanium 6, 7, 8.25, 9, 10, 11, 12, 13, 14mm width, 210-420 mm length
HW285 Alta Modular Trauma System - Cancellous - Titanium 4.2mm diaComponents Screws
HW286 Alta Modular Trauma System - Cancellous - Titanium 6.5mm diaComponents Screws
HW287 Alta Modular Trauma System - Cortical (fully threaded) - Titanium 3.7mm diaComponents Screws
HW288 Alta Modular Trauma System - Cortical (fully threaded) - Titanium 5.0mm diaComponents Screws
HW289 Alta Modular Trauma System - Cross Locking - Titanium 3.7mm diaComponents Screws
HW290 Alta Modular Trauma System - Lag - Titanium 40-130mm diaComponents Screws
HW291 Alta Modular Trauma System - Rod Cap Screw - Titanium Standard, +1cmComponents Screws
HW292 Alta Modular Trauma System - Cross Locking - Titanium 5mmComponents Screws
HW293 Alta Modular Trauma System - Tibial/Humeral Rod Tab - Titanium 1,2Components Screws
PART A - Prostheses List by Category, Groups and Sponsor Page 339 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW294 Alta Modular Trauma System - Washer - Cancellous Screw - Titanium One size onlyComponents Screws
HW338 Gamma Locking Nail Gamma Complete - Orthinox 125,130,135 degrees x 180mm lengthHW339 Gamma Locking Nail Long Complete - Orthinox 125,130,135 degrees x 340-440mm HW340 Gamma Locking Nail Standard - Orthinox 125,130,135 degrees x 180mm lengthHW341 Gamma Locking Nail Long Nail - Orthinox 125,130,135 degrees x 340-440mm HW342 Gamma Locking Nail Distal Screw - Orthinox 25-95mm lengthHW343 Gamma Locking Nail Lag Screw - Orthinox 85-120mm lengthHW344 Gamma Locking Nail Set Screw - Orthinox 8mm dia x 22-27 mm lengthHW345 Gamma Locking Nail Proximal Plug - Orthinox 17mmHW346 Grosse & Kempf Locking Nail Femoral - Rods and Screws - Stainless 10,11,12,13,14,15, 16mm width, 260-
380mm length
HW347 Grosse & Kempf Locking Nail Tibial - Rods and Screws - Stainless Steel 7.5,9,10,11,12,13, 14,15mm width, 240-375mm length
HW348 Grosse & Kempf Locking Nail Unreamed - Stainless Steel 7.5mm dia, 240 - 390mm lengthHW349 Grosse & Kempf Locking Nail Cross Screw - Stainless Steel 6.28mm x 15-95mmHW350 Grosse & Kempf Locking Nail Cross Screw - Stainless Steel 3.7mm x 25-70mmHW351 Grosse & Kempf Locking Nail Cross Screw - Stainless Steel 4.6mm x 20-70mmHW352 Grosse & Kempf Locking Nail Cross Screw - Stainless Steel 6.35mm x 50-90mmHW354 Metaizeau Nail Stainless Steel 2-4mm x 400-500mm
Link Orthopaedic AustraliaLO061 Orthofix K. Wires - Hand - Stainless Steel - 60 x 1,5 mm
threaded
LMT Surgical Pty LtdLM001 TriMed Wrist Fixation System WasherLM002 TriMed Wrist Fixation System Plates, Stainless Steel Radial and Ulna pin plate - 3 hole, 5 hole,
7 hole; L plate - left and right
LM004 TriMed Wrist Fixation System Buttress Pin Stainless Steel Wire Form 16 - 42mm Length, 8 - 14mm BendLM005 TriMed Wrist Fixation System Small Fragment Clamp Stainless Steel 16 - 32mm Length, 10 - 20mm Bend
Inner and Outer Component Wire Form
LM007 TriMed Wrist Fixation System Cortical Bone Screw, Stainless Steel Diameter 2.3 - 3.2mm, Length 10 -
PART A - Prostheses List by Category, Groups and Sponsor Page 340 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medical & Optical Instruments Australia Pty LtdMO150 Acumed Congruent Plate System Toe Fusion Plate Titanium 5 to 9 holeMO151 Acumed Congruent Plate System Distal Radius Plate Titanium 6 to 7 holeMO152 Acumed Congruent Plate System Thumb Plate Titanium 5 to 6 holeMO153 Acumed Congruent Plate System Screw Titanium 2.1, 2.7, 3.5, 4.0mm diameter, 6mm to
28mm length
MO154 Polarus Proximal Humeral Fixation Polarus Proximal Humeral Rod 150 - 300mm lengthStandard/Plus Titanium
MO156 Polarus Proximal Humeral Fixation Polarus Screws Cancellous/Cortical 12.5 to 60mm lengthMO158 Polarus Humeral Rod System Polarus Washer 3.5mmMO159 Polarus Humeral Rod System Polarus Ulna Rod Titanium 210 to 270mm lengthMO160 Polarus Humeral Rod System Polarus Retrograde Rod Titanium 200 to 300mm lengthMO161 Polarus Humeral Rod System Polarus Radius Rod Titanium 190 to 230mm lengthMO190 Acumed Congruent Plate System Mid-shaft compression plate - titanium 4 - 12 holeMO191 Acumed Congruent Plate System Metatarsal osteotomy plate - titanium Right, leftMO192 Acumed Congruent Plate System Malleolar plate - titanium Medial, anterior, lateral 5 hole, lateral 7 MO193 Acumed Congruent Plate System Fibula guide plate - titanium 3 - 7 holeMO194 Acumed Congruent Plate System Elbow plate - titanium Epicondyle, Olecranon, Coronoid,
Posterior, Radial Head, Small, Medium, Long, Extra Long, 10-Hole, Standard
MO195 Acumed Congruent Plate System Screw - titanium 2.7, 3.5, 4.0mm dia, 30 - 65 lengthMO209 Acumed Congruent Plate System Threaded K-Wire - Titanium WT-1606STT: Length 15cm x Diameter To be funded where
0.62"; WT-0906STT: Length 15cm x any or all K-wires used Diameter 0.35" in a procedure are used
as an implant.
MO211 Accumed Congruent Plate System Clavicle Plate - Titanium Small, Medium, Large, J-Shape, Left,
Medtel Australia Pty LtdME147 Universal Bone Plate System Bone Plate System - Unison Bone Plate 2 hole, 11.5-13mmME148 Universal Bone Plate System Bone Plate System - Unison Bone Plate 3 hole, 21.5-33.5mmME149 Universal Bone Plate System Bone Plate System - Unison Bone Plate 4 hole, 37.5-49.5mmME150 Universal Bone Plate System Bone Plate System - Unison Bone Plate 5 hole, 46.5-70.5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 341 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME151 Universal Bone Plate System Bone Plate System - Unison Bone Plate 6 hole, 65.5-81.5mmME152 Universal Bone Plate System Bone Plate System - Primary Bone Screw 3.5mmME153 Universal Bone Plate System Bone Plate System - Rescue Bone Screw 4.0mmME154 Universal Bone Plate System Bone Plate System - UPB Bone Plate 2 hole, 11-15mmME155 Universal Bone Plate System Bone Plate System - UPB Bone Plate 3 hole, 18-30mmME156 Universal Bone Plate System Bone Plate System - UPB Bone Plate 4 hole, 30.5-46.5mmME157 Universal Bone Plate System Bone Plate System - UPB Bone Plate 5 hole, 43.5-65mmME164 Universal Bone Plate System Bone Plate System - UPB Bone Plate 6 hole, 57-65mmME165 Universal Bone Plate System Bone Plate System - UPB Bone Plate 7 hole, 69-85mmME166 Universal Bone Plate System Bone Plate System - UPB Bone Plate 8 hole, 73-101mmME167 Universal Bone Plate System Bone Plate System - UPB Bone Plate 9 hole, 93-105mmME168 Universal Bone Plate System Bone Plate System - UPB Primary Screw 10-28mmME169 Universal Bone Plate System Bone Plate System - UPB Rescue Screw 10-28mm
Pacific MedicalPM109 Orthofix External Fixation Systems MiniRail System Short, Standard, Long and Articulated
Horizontal and Vertical Axis
PM110 Orthofix External Fixation Systems Pennig Minifixator Short, Standard, Long
Smith & Nephew Surgical Pty LtdSN519 TriGen Capture Reconstruction Screws Titanium 6.4mm diameter 65-125mm lengthSN520 TriGen Captured Screws Titanium 4.5 & 5.0mm diameters, 20-110mm SN521 TriGen Femoral Antegrade Nail (FAN) 10 x 26cm - 13 x 50cmSN522 TriGen Knee Nail 8.8, 10, 11.5 & 13mm diameters, 26-
50cm lengths
SN665 TriGen TAN Titanium 6A1-4V 10, 11.5 & 13mm Diameter, 30 - 50cm SN666 TriGen Nail Cap Titanium 5 - 20mm body lengthSN713 Trigen Stable-Lok Nut One Size OnlySN739 Trigen Self Tapping Cortical Screw 20mm - 60mmSN740 Trigen Humeral Nail 7-11cm x 16-30cm
PART A - Prostheses List by Category, Groups and Sponsor Page 342 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stryker Australia Pty LtdSK367 Stryker Plating System Numelock II Locking Plate System Distal Femur - 5 holes to 11 holes, left
and right
SK368 Stryker Plating System SPS Locking Plate System Distal Medial and Lateral tibia, 4 hole to 10 hole, left and right
SK377 Stryker Plating System SPS Locking Plate System Distal Femur - 4 holes to 12 holes, Left and right
SK379 Stryker Plating System SPS Locking Plate System Proximal Humerus 3 Holes to 5 Holes Left and Right
SK380 Stryker Plating System Numelock II Locking Plate System Proximal Humerus 4 Holes to 10 Holes Left and Right
SK381 Stryker Plating System Numelock II Locking Plate System Distal Humerus, Lateral and Medial, 1 hole to 5 holes
SK382 Stryker Plating System Numelock II Locking Plate System Locking screws: 4.5mm x 14mm to 4.5mm x 75mm, 6.5mm x 27mm to
SK383 Stryker Plating System SPS Locking Plate System Proximal Tibia, Lateral and Medial, 4 hole to 12 holes, left and right
SK384 Stryker Plating System Numelock II Locking Plate System Distal tibia, 3 hole to 9 hole, left and rightSK395 Stryker Plating System SPS Locking Plate System Locking Screws: 3.0mm x 8mm to
3.0mm x 30mm, 3.9mm x 14mm to 3.9mm x 120mm, 5.1mm x 14mm to
ST052 Square Fit 1.7mm Quik Flap System Kit contains three titanium 2 hole plates, 2 hole plate. 4mm length screwand 6 titanium alloy bone screws
ST062 Auto Pilot 1.7mm Quik Flap System Kit contains three titanium 2 hole plates, 2 hole plate. 4mm length screwand 6 titanium alloy bone screws
ST063 Auto Pilot 1.7mm Quik Burr System Kit contains one 14mm Malleable Burr 14mm plate. 4mm length screwHole Cover plate and 5 titanium alloy bone
ST064 Square Fit 1.7mm Quik Burr System Kit contains one 14mm Malleable Burr 14mm plate. 4mm length screwHole Cover plate and 5 titanium alloy bone
ST065 Cross Slot 2.0mm Quik Flap System Kit contains three titanium 2-hole plates 2 hole plate. 4.0mm length screwand six titanium low profile bone screws
ST803 Grosse and Kempf Locking Nail - Cross screws 15 - 95mm lengthST804 Grosse and Kempf Locking Nail - 4.6mm Cross screws 20 - 70mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 343 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI149 Periarticular Plates Periarticular 6.5mm Cancellous Screws - 16mm Thread - 35-90mm Long, 32mm
Stainless Steel Thread - 45-90mm Long, Fully Threaded - 25-90mm Long
ZI150 Periarticular Plates Periarticular 4.0mm Cancellous Screws - Part thread - 30-60 mm, Full thread 30-Stainless Steel 110 mm
ZI151 Periarticular Plates Periarticular 4.5mm Self Tapping Screws 26 - 90mm - Stainless Steel
ZI152 Periarticular Plates Periarticular 3.5mm Self Tapping Screws 10 - 80mm - Stainless Steel
ZI153 Periarticular Plates Periarticular Tibial Plateau Plates - 2 holes - 14 holes Left & RightStainless Steel
ZI154 Periarticular Plates Periarticular Femoral Condylar Plates - 4 holes - 18 holes Left & RightStainless Steel
ZI157 Zimmer Internal Fixation Systems: Freelock/Versa-fx tube plate - Stainless 2 holes - 20 holesCompression Hip Screw
ZI158 Zimmer Internal Fixation Systems: Freelock/Versa-fx lag screw - Stainless 50 mm - 150 mm longCompression Hip Screw
ZI236 Intramedullary Nails End Caps - Stainless Steel 0 - 15mmZI237 Intramedullary Nails Humeral Nail - Stainless Steel 6 - 13mmZI238 Intramedullary Nails Retrograde Nail - Stainless Steel 9 - 14mmZI239 Intramedullary Nails Tibial Nails - Stainless Steel 6 - 15mmZI240 Intramedullary Nails Femoral/Recon Nails - Stainless Steel 8 - 16mmZI241 Intramedullary Nails Locking Screws - Stainless Steel 20 - 130mmZI242 Intramedullary Nails Nuts - Stainless Steel 6.5 mmZI243 Periarticular Plates Stainless Steel 2 - 20 HoleZI320 ITST Intramedullary Nails Stainless Steel Intertrochanteric Nailing Diameter 10 - 14mm; Length 18 - 50cm
System
ZI321 Intramedullary Nail Caps Stainless Steel Intertrochanteric Nailing Diameter 0 - 20mmSystem
ZI322 ITST Intramedullary Nailing System - Stainless Steel Intertrochanteric Nailing Diameter 11mm: Length 70mm - 120mmLag screw System
ZI331 Zimmer Periarticular Locking Plates Periarticular Locking Plating System Various lengths and numbers of holes
PART A - Prostheses List by Category, Groups and Sponsor Page 344 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic Internal Fixation Systems, Other
Biomet Australia Pty LtdBI206 Arthrotek Ligament Fixation System Washerloc Fixator, Screw, and Fixator Fixator 16mm, Screw 24-60mm
Titanium
BI233 Arthrotek Ligament Fixation System Suture Button, HMWPE 15mm, 19mmBI234 Arthrotek Ligament Fixation System Ligament Washer, Titanium 14mm, 18mmBI235 Arthrotek Ligament Fixation System Bone Screw, Ligament, Titanium 30,35,40mmBI236 Arthrotek Ligament Fixation System Bone Screw, Titanium 3.5mm (10-40mm)BI237 Arthrotek Ligament Fixation System Channel Ligament, Clamp, Titanium 10mm, 13mm 15mmBI238 Arthrotek Ligament Fixation System Channel Ligament, Cortical Screws Pk 6 3.5mm (10-40mm)BI239 Arthrotek Ligament Fixation System Interference Screw, Titanium 15-30mmBI240 Arthrotek Ligament Fixation System Screw, Bicortical, Titanium 30-60mmBI246 Arthrotek Ligament Fixation System Bone Mulch Screws, Titanium 10.5mm x (20-35mm)BI576 Distraction Technology System Distractor, Flexible Shaft, Facial, Titanium 1 - 3inch Only to be funded
where used in a service for which a Medicare Benefit is payable
BI580 Distraction Technology System Distractor, Midface, Drive Screw with 20 - 30mm Only to be funded Sleeve. Titanium where used in a service
for which a Medicare Benefit is payable
BI582 Distraction Technology System Plate, Anterior or Posterior, Mid Face Standard or Long Only to be funded where used in a service for which a Medicare Benefit is payable
BI586 Distraction Technology System Mandibular, Straight Plate or Distractor 10-25mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI588 Distraction Technology System Distractor, Paediatric, Titanium 10 - 30mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 345 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
De Puy AustraliaDP039 Orthosorb Absorbable Pin Orthosorb K-Wire - Stainless Steel L300 D2.0mm Thread EachDP099 Coventry Screw System S/S Cannulated Screws 7.00 mm diaDP102 Coventry Screw system Cannulated Screws 4mm and 4.50 mmDP105 Coventry Screw system S/S Standard or Heavy or Extra Heavy Duty 2 -4 or 3- 4 Hole Standard or 130 DegDP106 Coventry Screw system S/S Cancellous Screw 4mm or 4.5mm 16-90mm LengthDP854 Songer Cable System - Titanium Flex Bar - Large/Small or Flanged Crimp 35mm/30mm
2 Hole Bar /Flat Bar (Pk 2)
DP858 Songer Cable System - Stainless Steel Flanged Crimp/Flat Bar (Pk2) or 2 Hole One size onlyBar (Pk 2)
DP859 Songer Cable System - Stainless Steel Isola Single Cable & Crimp (Pkt 6) One size onlyDP860 Songer Cable System - Stainless Steel Double Loop Cable with 2 Crimps One size onlyDP862 Songer Cable System - Titanium Double Loop Cable with 2 Crimps One size onlyDP864 Songer Cable System - Titanium Isola Single Cable & Crimp (Pkt 6) One size only
Howmedica IncorporatedHW183 First Step High Tibial Osteotomy System Proximal Component 5mm Step - Vitallium 60 to 90mm in 5mm incrementsHW184 First Step High Tibial Osteotomy System Proximal Component 10mm Step - 60 to 90mm in 5mm incrementsHW185 First Step High Tibial Osteotomy System Proximal Component 15mm Step - 60 to 90mm in 5mm incrementsHW186 First Step High Tibial Osteotomy System Distal Component - Vitallium 30 to 55mm in 5mm incrementsHW187 First Step High Tibial Osteotomy System Total Procedure - Vitallium 60 to 90mm in 5mm increments 30mm
to 55mm in 5mm increments
HW257 Wichita Fusion Nail System Femoral Component - Vitallium 18mmHW258 Wichita Fusion Nail System Tibial Component - Vitallium 12mmHW259 Wichita Fusion Nail System Compression Screw - Vitallium One size onlyHW260 Wichita Fusion Nail System Transverse Screw - Vitallium 30-60mm in 5mm increments
LMT Surgical Pty LtdLM008 Spider and Mini-Spider Limited Wrist Stainless Steel 8 hole spider plate, 6 hole mini-spider plate
Fusion System
LM009 The Subtaler MBA Implant Titanium 6, 8, 9, 10, 12mm and guide pin 2mm
PART A - Prostheses List by Category, Groups and Sponsor Page 346 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LM013 Cobra Total Wrist Fusion System Titanium Plate and Screws Plate - one size only, Screws - diameter 2.8mm, length 10, 14, 18mm and diameter 3.5mm, length 14, 16, 18, 20,
Medical & Optical Instruments Australia Pty LtdMO134 Martin Miniplate Osteosynthesis System Screw Fami Titanium 2mm diameter, 8mm length Only to be funded
where used in a service for which a Medicare Benefit is payable
MO135 Martin Internal Distraction System Titanium Distractor 10 to 20mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO136 Intra Oral Mandibular Distraction System Vertical 6 to 15mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO137 Intra Oral Mandibular Distraction System Ramus 15 to 25mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO200 Polarus Proximal Humeral Fixation End cap, titanium Only size onlyMO201 Intra-Oral Vertical Distractor Titanium distraction device utilising Two-hole threaded fixation plates - one Only to be funded
micro-threaded fixation plates, distraction size only; distraction screws - where used in a service screws and positioning screws. 8,10,12,14mm; positioning screws - for which a Medicare
Benefit is payable
Medtronic Australasia Pty LtdMC299 TiMesh TiMesh LP Open Door (OD) PlateMC308 TiMesh TiMesh LP Open Door Graft (GP) PlateMC309 TiMesh TiMesh LP French Door (FD) PlateMC310 TiMesh TiMesh LP Screw
Medtronic Sofamor Danek Australia Pty LtdSD071 Atlas Cable System (SS) Single w/crimp and bar One size onlySD072 Atlas Cable System (SS) Double w/2 crimps One size onlySD073 Atlas Cable System (SS) Crimp One size onlySD074 Atlas Cable System (Ti) Single (loop end) w/crimp One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 347 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD075 Atlas Cable System (Ti) Double w/2 crimps One size onlySD076 Atlas Cable System (Ti) Crimp One size onlySD212 R90 Spacer Spinal Implant (Peek) Height: 7mm - 16mm, Lordosis: 6
degrees - 18 degrees, Length: 18 -27mm
SD213 Union CC System Cage 6mm - 12mm, 0 - 8 degreesSD214 CD Horizon Spondylolisthesis Screw Diameter: 4.5 - 7.5, Length: 25mm - 50mm
National Surgical Corporation Pty LtdNI139 Distraction Device Medicon Ti - Mandibular 15 - 20mm Only to be funded
where used in a service for which a Medicare Benefit is payable
NI140 Distraction Device Medicon Ti - Mandibular Distraction 10 - 25mm Only to be funded where used in a service for which a Medicare Benefit is payable
Orthotech Pty LtdOH128 Anterior Lumbar Cage Titanium or PEEK Height 2 - 20mm
Pacific MedicalPM108 Orthofix Limb Reconstruction System Adult and paediatric - Short, Standard and
Long
Smith & Nephew Surgical Pty LtdSN443 Reis Cable and Swage 1.6 & 2.0mmSN444 Reis Swage 1.6 & 2.0mmSN730 Accord Orthopaedic Cable System, Titanium 150-250mmSN731 Accord Orthopaedic Cable System, Sm Cable 75-255mmSN732 Accord Orthopaedic Cable System, SS Cable 2.0mmSN733 Accord Orthopaedic Cable System, SS Button One Size Only
Plate Adapter
SN734 Accord Orthopaedic Cable System, SS Screw One Size OnlyPlate Adapter
SN735 Accord Orthopaedic Cable System, Std Cable 85-265mmSN737 Accord Orthopaedic Cable System 115 - 125mmSN738 Accord Orthopaedic Cable System 185 - 195mm
PART A - Prostheses List by Category, Groups and Sponsor Page 348 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stryker Australia Pty LtdSK114 Modular Internal Distraction System MID System provides temporary Frames 15 & 30mm Only to be funded
stabilisation and gradual lengthening of where used in a service the cranial, midfacial, or mandibular for which a Medicare
Benefit is payable
SK115 LEAD (Leibinger Endosseous Alveolar System using plates and distraction rods Rods - 17-32mm Only to be funded Distraction System for intraoral endosseous distraction, where used in a service
titanium components. for which a Medicare Benefit is payable
SK116 Dynaform Intraoral Distraction System System using distraction frames plus Titanium frames 7 & 12mm; Only to be funded integral components for mandibular where used in a service widening and lengthening by intraoral for which a Medicare distraction, titanium components Benefit is payable
SK316 Secure Strand Cable System Bone Reapproximation Cable Diameter 1.0mm
Surgiplas MedicalSP045 Logic Distraction System Distractor, spacers & activation set Straight, Curved 18-52mm
Taylor Bryant Pty LtdTB215 Spine Solutions Prodisc Artificial mechanical disc, superior plate 6 Degree, 11 Degree, Medium, Large
component
TB216 Spine Solutions Prodisc Artificial mechanical disc, polyethylene 10,12,14mm, Medium, LargeTB217 Spine Solutions Prodisc Artificial mechanical disc, inferior plate Medium, Large
component
TiMax Surgical Pty LtdTI043 CPS Bioabsorbable Fixation System CPS Systems and Baby System Plates. 1.5-2.5 mesh plates, 14 x 14 holes;
Polylactic Acid Trimethylene Carbonate 1.5mm baby mesh plate 14 x 14 holesCopolymer
TI044 CPS Bioabsorbable Fixation System CPS Systems and Baby System Plates. 1.5-2.5 mesh plate, 7 x 7 holes; 1.5mm Polylactic Acid Trimethylene Carbonate baby mesh plate 7 x 7 holesCopolymer
TI045 CPS Bioabsorbable Fixation System CPS Systems and Baby System Plates. 1.5mm baby plates:- 20 hole, c-plate & x-Polylactic Acid Trimethylene Carbonate plate 7 hole, 2 holeCopolymer
TI046 CPS Bioabsorbable Fixation System CPS Systems and Baby System Plates. 1.5mm plates:- 20 holes, c-plate & x-platePolylactic Acid Trimethylene Carbonate 7 hole, L-plate 7 hole L & R. burrholeCopolymer
PART A - Prostheses List by Category, Groups and Sponsor Page 349 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TI047 CPS Bioabsorbable Fixation System CPS Systems and Baby System Plates. 1.5-2.5mm plates:- 2-10 hole plates and Polylactic Acid Trimethylene Carbonate extended, c-plate & x-plate 7 hole, H-Copolymer plate 8 hole, orthognathic hole and L-plate
L & R 7 hole
TI051 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Plates 6 & 8 holecopolymer
TI052 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Plates 2 & 2.5 systems 4,6,8, 10 holecopolymer
TI053 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Pin 1.5 & 2 mm dia x 20-50 mm longcopolymer
TI054 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Mesh plate 2 & 2.5 systems 7x7 holescopolymer
TI055 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Mesh plate 2 & 2.5 systems 14x14 holescopolymer
TI056 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 2.8 x 6-23mm, 3.1 x 6-8mmcopolymer
TI057 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 3.1 x 10-18mmcopolymer
TI058 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 2.8 x 40mm, 2.5 x 30mm, 4.5 x copolymer
TI059 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 4.5 x 20-55mm, 3.1 x 40mmcopolymer
TI060 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 2 x 9-19mm, 2.5 x 10-23mmcopolymer
TI061 CPS Bioabsorbable Fixation System OTPS fixation system: PLGA/TMC Screws 2 & 2.5 mm dia x 5-8mm longcopolymer
TI062 CPS Bioabsorbable Fixation System Trinion meniscus screw: PLGA/TMC 10 & 12mm longcopolymer
TI063 CPS Bioabsorbable Fixation System Trinion meniscus screw: PLGA/TMC 3 x 10mm & 1 x 12mmcopolymer
TI068 CPS Bioabsorbable Fixation System Anterior Cervical Plate System: 19-60mmPLCA/TMC Copolymer
TI069 CPS Bioabsorbable Fixation System Anterior Cervical Plate System: 62.5-110mmPLCA/TMC Copolymer
PART A - Prostheses List by Category, Groups and Sponsor Page 350 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic Internal Fixation Systems, Spinal
Australian Surgical Innovations Pty LtdAI001 Oria Zenith Plate Length 23 - 97mmAI002 Oria Zenith Screw Diameter: 4.0 - 4.5mm. Length - 10 - AI003 Oria Natura Interbody Cage Height - 9 - 14mm, Length 20 - 25mmAI008 Oria Claris Screw Diameter 3.5 - 7.5mm / Length 10 - AI009 Oria Claris Locking Component nut, self-breaking nutAI010 Oria Claris Connector Extremity, off-set, omniaxial, lateralAI011 Oria Claris Rod Diameter 4-6mm. Length 40-200mmAI012 Oria Claris Transverse Link Connector and Rod
B Braun Australia Pty LtdBB001 Spine System Evolution Hook Pin Length 25 - 60mmBB002 Spine System Evolution Hook, Left and right For 5.2 and 6mm rods, Thoracic, pedicle,
laminar
BB003 Spine System Evolution Counter/angled/universal hook Universal - short, long; Counter - small, medium; Angled - left, right
BB004 Spine System Evolution Lateral Connector Small, medium, largeBB005 Spine System Evolution Sacral Screw Length 24 - 52mmBB006 Spine System Evolution Sacral Plate Left/right for 5.2 and 6mm rodsBB007 Spine System Evolution Clamp for Cross Plate For 5.2 and 6mm rodsBB008 Spine System Evolution Cross Plate For 5.2 and 6mm rods, length 50 - BB009 Spine System Evolution Rod Connector For 5.2 and 6mm rodsBB010 Spine System Evolution Rod Dia 5.2 and 6mm , length 40 - 500mmBB011 Spine System Evolution Screw Dia 5 - 8mm, length 30 - 55mmBB012 Spine System Evolution Locking Screw For 5.2 and 6mm rods, length 30 - 55mmBB013 Spine System Evolution Head for Polyaxial Screw For 5.2 and 6mm rodsBB014 Spine System Evolution Nut For screws for 5.2 and 6mm rods
PART A - Prostheses List by Category, Groups and Sponsor Page 351 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB061 Socon Spinal System Socon Transpedicular Screw Length 35mm-65mm, Dia 5mm-7mmBB062 Socon Spinal System Socon Connecting Rods Length 40mm-200mm, Dia 6mmBB063 Socon Spinal System Socon Angled Rod Length 45mm-80mm,Dia 6mmBB064 Socon Spinal System Socon Clamps One size onlyBB065 Socon Spinal System Socon Crossbar Length 50mm-80mmBB066 Socon Spinal System Cross Bar Clamp One size onlyBB070 Prospace Block Titanium 9mm-11mmBB164 MACS TL Implant Set - Clamp Titanium 1.2cm - 0.9cmBB165 MACS TL Implant Set - Nut Titanium Dia 15mmBB166 MACS TL Implant Set - Bone Graft Clamp Titanium 1.6 x 1cmBB211 KLA Anterior Lumbar Cage System Anterior Lumbar Cage - PEEK 9mm x 5 degrees, 11mm x 5 degrees,
13mm x 5 degrees, 11mm x 9 degrees, 13mm x 9 degrees, 15mm x 9 degrees, 13mm X 13 degrees, 15mm X 13 degrees
BB212 CBK Anterior Cervical Cage System Anterior Cervical Cage - PEEK 4.5mm, 5.5mm, 6.2mm, 7mm, 8mm, 9mmBB213 CO Posterior Lumbar Cage System Posterior Lumbar Cage - PEEK L23.5 x 9mm x h8mm, L23.5 x 9mm x
h9mm, L23.5 x 10mm x h10mm, L23.5 x 10.7mm x h11mm, L23.5 x 11.7mm x h12mm, L23.5 x 12.7mm x h13mm, L23.5 x 13.7mm x h14mm, L23.5 x 14.7mm x h15mm, L23.5 x 9mm x
BB214 CC Posterior Lumbar Cage System Posterior Lumbar Cage - PEEK L23.5 x 10-12.5mm x h8mm, L23.5 x 10-12.5mm x h9mm, L23.5 x 10-12.5mm x h10mm, L23.5mm x 11-13.5mm x h11mm, L23.5 x 11-13.5mm x h12mm, L23.5mm x 11-13.5mm x h13mm, L23.5 x 11-13.5mm x 14mm,
BB215 Adonys Posterior Lumbar Cage System Posterior Lumbar Cage - PEEK - 8mm x 4 degrees, 12mm x 4 degrees, 8mm x 10 degrees, 12mm x 10 degrees
BB216 Adonys Posterior Lumbar Cage System Posterior Lumbar Cage - Short 8mm x 4 degrees, 10mm x 4 degrees, 12mm x 4 degrees, 8mm x 10 degrees, 10mm x 10 degrees, 12mm x 10 degrees
PART A - Prostheses List by Category, Groups and Sponsor Page 352 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB217 Samarys Anterior Cervical Cage System Anterior Cervical Cage - PEEK L15 x w17 x h5mm, L15 x w17 x h6mm, L15 x w17 x h7mm, L15 x w17 x h8mm, L13 x w17 x h5mm, L13 x w17 x h6mm, L15 x w20 x h5mm, L15 x w20
BB219 S4 Pedicle Screw System S4 Straight Rod - Titanium 35mm - 60mmBB220 S4 Pedicle Screw System S4 Straight Rod - Titanium 70mm - 180mmBB221 S4 Pedicle Screw System S4 Straight Rod - Titanium 200mm - 500mmBB222 S4 Pedicle Screw System S4 Pre-bent Rod - Titanium 35mm - 55mmBB223 S4 Pedicle Screw System S4 Pre-bent Rod - Titanium 60mm - 100mmBB224 S4 Pedicle Screw System Polyaxial Screw - titanium various sizes Diameter 4.5mm & 5mm - all lengths 25
- 60mm
BB225 S4 Pedicle Screw System Polyaxial Screw - Titanium various sizes Diameter 6.0mm, 7.0mm & 8.0mm - all lengths 25 - 60mm
BB226 S4 Pedicle Screw System Monoaxial Screw - titanium various sizes Diameter 4.5mm & 5mm - all lengths 25 - 60mm
BB227 S4 Pedicle Screw System Monoaxial Screw - titanium various sizes Diameter 6.0mm, 7.0mm & 8.0mm - all lengths 25 - 60mm
BB228 S4 Pedicle Screw System S4 Cross Connector - titanium Rigid 22mm - 41mmBB229 S4 Pedicle Screw System S4 Cross Connector - titanium Variable 43mm - 75mmBB230 S4 Pedicle Screw System Set Screw - titanium one size
Biomet Australia Pty LtdBI709 Vuelock Anterior Cervical Plate System Plate, Cervical, Four Level, Titanium 60 - 92mmBI710 Vuelock Anterior Cervical Plate System Plate, Cervical, Three Level, Titanium 44 - 66mmBI711 Vuelock Anterior Cervical Plate System Plate, Cervical, Two Level, Titanium 26 - 42mmBI712 Vuelock Anterior Cervical Plate System Plate, Cervical, One Level, Titanium 12 - 24mmBI713 Vuelock Anterior Cervical Plate System Screw, Titanium Dia 4 - 5mm, length 12 - 16mm
De Puy AustraliaDP251 DOC Ventral Stabilisation System Doc Plate 1-3 LevelDP252 Acroflex Lumbar Artificial Disc Lumbar Disc Replacement Device One size onlyDP299 Moss Miami (Stainless Steel) Hooks - Pedicle One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 353 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP300 Moss Miami (Stainless Steel) Hooks - Laminar as Wide or Narrow or One size onlyAngled or Reduced Distance Supra-laminar or Offset or Extended Body
DP301 Moss Miami (Stainless Steel) Transverse Connector - Complete One size onlyDP304 Moss Miami (Stainless Steel) Inner Screw and Outer Nut 3 - 5mmDP305 Moss Miami (Stainless Steel) Axial Connector 5mm/5mm and 5mm/7mmDP306 Moss Miami (Stainless Steel) Monoaxial Screws 5 - 8mm x 25 - 60mmDP307 Moss Miami (Stainless Steel) Polyaxial Screws 5 - 7mm x 25 - 60mmDP311 Moss Miami (Stainless Steel) Transverse Connector Rod or Screw or One sizeDP315 Moss Miami (Stainless Steel) Pre-Cut Rod 5mm x 30 - 90mmDP329 Moss Miami (Stainless Steel) Hooks - Translation (Pedicle/Reduced One size only
Distance/Narrow/Wide Blade)
DP394 Moss Miami (Titanium) Pre-Cut Rod 5.5mm x 30 - 90mmDP400 Moss Miami (Titanium) Rod - Standard 5.5mm x 12 - 48cmDP405 Moss Miami (Titanium) Outer Nut or Inner Screw One Size OnlyDP407 Moss Miami (Titanium) Monoaxial Screw 5 - 8mm x 25 - 60mmDP408 Moss Miami (Titanium) Polyaxial Screw 5 - 8mm x 25 - 60mmDP410 Moss Miami (Titanium) Hooks - Pedicle 3-5 mmDP411 Moss Miami (Titanium) Hooks - Laminar as Wide or Narrow or One size only
Angled or Reduced Distance Supra-laminar or Offset or Extended Body
DP412 Moss Miami (Titanium) Transverse Connector - Complete One size onlyDP413 Moss Miami (Titanium) Axial Connector 5mm/5mmDP416 Moss Miami (Titanium) Washers - Slotted / Angled One Size OnlyDP418 Moss Miami (Titanium) Hooks - Translation One size onlyDP420 Moss Miami (Titanium) Transverse Connector Hook or Screw or One SizeDP422 Moss Miami 4mm Anterior System (SS) 12 Sided Outie One size onlyDP449 Kaneda SR (Smooth Rod) Anterior (TI) Closed Screw 1/4" - 6.25mm x 25 - 60mmDP450 Kaneda SR (Smooth Rod) Anterior (TI) Plates Small/Large - Caudal or RostralDP451 Kaneda SR (Smooth Rod) Anterior (TI) Transverse Coupler 1/4" x 13 - 16mm
PART A - Prostheses List by Category, Groups and Sponsor Page 354 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP452 Kaneda SR (Smooth Rod) Anterior (TI) Pre Cut Rod 1/4" x 45 - 150mmDP453 Isola Paediatric System (Stainless Steel) Threadless TRC - Closed or Open Body 3/16"
without Rod
DP454 Isola System (Titanium) Slotted Connectors Standard or Extended 1/4" & 3/16"or Offset or Angled or Open or Twister
DP459 Isola System (Titanium) Jaw Clamp 1/4" & 3/16"DP460 Isola System (Titanium) Right Hand Nut 5/16"DP461 Isola System (Titanium) Spinal Rod 1/4" & 3/16" x 18" & 24"DP462 Isola System (Stainless Steel) Wedding Band 1/4 " & 3/16"DP463 Isola System (Titanium) Set Screw 6.35mmDP464 Isola System (Titanium) Closed Hooks 1/4" x 3/16" x 5-11mmDP465 Isola System (Titanium) Open Hook and / or Cap 1/4" & 3/16" x 5-11mmDP466 Isola System (Titanium) Wedding Band 1/4" & 3/16"DP469 Isola System (Stainless Steel) Slotted Connectors - Standard or 1/4" & 3/16"
Extended or Offset or Angled or Open or
DP470 Isola System (Stainless Steel) Transverse Rod Connector or Dual Rod 1/4" & 3/16"Connector
DP471 Isola System (Stainless Steel) Closed Hooks 1/4" & 3/16" x 5-11mmDP472 Isola System (Stainless Steel) Open Hook Cap or Open 1/4" & 3/16" x 5-11mmDP473 Isola System (Stainless Steel) Iliac Screw 6.25 & 7.0mmDP474 Isola System (Stainless Steel) Jaw Clamp 1/4" & 3/16"DP475 Isola System (Stainless Steel) Right Hand Nut 5/16"DP476 Isola System (Stainless Steel) Eye Rod 1/4" & 3/16" x 18" - 24"DP477 Isola System (Stainless Steel) Spinal Rod Standard 1/4" & 3/16" x 18" & 24"DP480 Isola System (Stainless Steel) Wire with Button or Beaded Wire One size onlyDP485 Isola System (Stainless Steel) Dual Diameter Rod 3/16" to 1/4" x 18 - 24"DP487 Isola Paediatric System (Stainless Steel) Side Tightening Hook - Opened/Closed 3/16" x 3.5mm - 11mmDP488 Isola Paediatric System (Stainless Steel) Pre-Bent Rod 3/16 "DP489 Isola Paediatric System (Stainless Steel) Cable Wire Screw 4.75 - 5.50mm x 25 - 30mmDP490 Isola Paediatric System (Stainless Steel) Wedding Band 3/16"
PART A - Prostheses List by Category, Groups and Sponsor Page 355 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP492 Isola System (Titanium) Iliac Screws 6.25mm & 7.0mmDP494 Isola System (Stainless Steel) Spinal Rod Hex Ends - Easy/Premium 1/4" x 18"DP495 Isola Paediatric System (Stainless Steel) Growth/Tandem Connector 3/16"DP496 Isola Paediatric System (Stainless Steel) Threadless TRC - Closed / Open Body 3/16"
with Rod
DP499 Isola System (Titanium) Transverse Connector or Dual Rod 1/4" & 3/16"DP501 Isola System (Stainless Steel) Set Screw One size onlyDP502 Anterior Isola System (SS) Single Hole Washer and Staples 16-22mmDP504 Anterior Isola System (SS) Open / Closed Screw 1/4" x 5.5-7mm x 20-55mmDP505 Anterior Isola System (SS) Rod with Hex End 1/4" x 18"DP515 I/F Ramp PLIF C/F Ramp 7-11 x 11-15 x 21 - 25 mmDP564 Peak Polyaxial Anterior Cervical Plate Anterior Cervical Plate 1 - 4 SegmentDP567 Peak Polyaxial Anterior Cervical Plate Graft Screw or Safety Locking Screw 4mm x 9 -15mmDP569 Peak Polyaxial Anterior Cervical Plate Primary Locking Screw 4mm x 10 -16mm
System
DP576 Kaneda Anterior Scoliosis System S/S Open Screw - Standard or Blunt 3/16" - 6.25mm x 25 - 50mmDP577 Kaneda Anterior Scoliosis System S/S Closed Screw - Standard or Blunt 3/16" - 6.25mm x 25 - 50mmDP580 Kaneda Anterior Scoliosis System S/S Radiused Caps for Open Screws 3/16" DP581 Kaneda Anterior Scoliosis System S/S Staple Single or Double Hole Small - LargeDP828 Profile Anterior Thoracolumbar Plate Plates - Thoracolumbar 50 - 120mmDP829 Profile Anterior Thoracolumbar Plate Plates - High Thoracic 40 - 110mm DP830 Profile Anterior Thoracolumbar Plate Cancellous Screw 6mm x 20 - 60mmDP831 Profile Anterior Thoracolumbar Plate Cancellous Bolt 7mm x 25 - 60mmDP832 Profile Anterior Thoracolumbar Plate Locking Inner Screw One size onlyDP833 Profile Anterior Thoracolumbar Plate Graft Screw 15 - 30mm DP834 Profile Anterior Thoracolumbar Plate Locking Outer Nut One size onlyDP842 Moss Miami (Stainless Steel) Sacral Extender 5mm x 5 - 20mm lengthDP843 Moss Miami (Titanium) Sacral Extender 5mm x 5 - 20mm lengthDP845 Moss Miami 4mm Anterior System (SS) Hooks 4mm
PART A - Prostheses List by Category, Groups and Sponsor Page 356 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP846 Moss Miami 4mm Anterior System (SS) Rods 4.0mm x 30 - 48cmDP847 Moss Miami 4mm Anterior System (SS) Screws - Monoaxial 6mm x 25 - 55mmDP848 Moss Miami 4mm Anterior System (SS) Screws - Polyaxial 6mm x 25 - 55mmDP849 Moss Miami 4mm Anterior System (SS) Washer or Staple or 12 sided outie One size onlyDP851 Surgical Titanium Mesh System Standard & Trapezoidal 10-16mm x 8-17mm HgtDY039 TiMX Low Back System Pedicle Screws (Standard or +5 No Cut) 5.5 - 7.75mm x 30 - 50mmDY041 TiMX Low Back System Sacral Connector (Left & Right Offset or One size onlyDY042 TiMX Low Back System VSP Bone Plate One/One & 1/2/Shortened/Double
Half/Triple Half Slot
DY044 TiMX Low Back System VSP Bone Plate Two/Two & 1/2/Three SlotDY050 TiMX Low Back System Slotted Connector (Left & Right Offset 1/4"
or Straight or Extended or Twister)
DY054 TiMX Low Back System Hexlobe Set Screw or Spherical Nut One size onlyDY057 TiMX Low Back System Washers - Standard / Tapered 3mm & 4.5mmDY059 TiMX Low Back System Modular Cross Connector Hex Lobe Set One size only
Screw
DY062 Brazenor Device Custom Cervical Buttress One size onlyDY078 Kaneda SR Anterior Kaneda SR Anterior Open Screw 1/4"-6.25mm x 25-60mm, 3/16"DY094 Isola Paediatric System Stainless Steel, Slotted Connector 3/16"DY100 Isola System (Stainless Steel) Threadless TRC - Closed or Open Body 1/4" & 3/16"
with Rod
DY102 Isola System (Stainless Steel) Threadless TRC - Closed / Open Body - 1/4" & 3/16"No Rod
DY103 Isola System (Stainless Steel) Modular Cross Connector Set Screw One Size OnlyDY105 Isola System (Titanium) Eye Rod 1/4" x 18"DY106 Isola System (Titanium) Modular Cross Connector Set Screw One size onlyDY107 Carbon Fibre Cages Stackable Cage Titanium Interface Screw One size onlyDY108 Isola System Titanium, Locking Screw 60-120mmDY109 Carbon Fibre Cages Stackable Cage Titanium Protective 5-15mmDY110 Carbon Fibre Cages Stackable Cage Titanium Interface Screws M4 / M5
PART A - Prostheses List by Category, Groups and Sponsor Page 357 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY170 Monarch Spinal System Bolts - Pedicle & Reduction 4.75 - 8.5 mm x 30 - 55mmDY171 Monarch Spinal System Pedicle Screws - Polyaxial 4.75 - 8.5 mm x 30 - 55mmDY174 Monarch Spinal System Bone Plate ½ to 1½ or 2 - 3 or 3½DY176 Monarch Spinal System Washers and Set Screws One size onlyDY178 Monarch Spinal System Hooks - Closed (Narrow Tapered / wide 5 - 11 mm
Blade)
DY179 Monarch Spinal System Slotted Connectors One size only(Straight/Extended/Offset/Twister/Mini Offset)
DY182 Monarch Spinal System Rods 6.35 & 5.5mm x 450mmDY184 Monarch Spinal System Dual Rod Connectors End to End or Side 6.35 to 6.35mm or 6.35 to 5.5mm or
by Side 6.35 to 4.75mm
DY185 Monarch Spinal System Plate J-Hooks 3.5 - 11 mmDY186 Monarch Spinal System Band Clamp Connector 6.35 & 5.5mmDY198 Carbon Fibre Cages ALIF 1 C/F Cage 5 - 10 deg Sm to Lg 10 - 18 mmDY289 Crossover System (Titanium) Crossconnector Small 18-30mmDY290 Crossover System (Titanium) Crossconnector Medium 32-45mmDY292 Crossover System (Titanium) Crossconnector Large 45-107mmDY293 Crossover System (Titanium) Crossover Nut or Ball Screw One size onlyDY297 Slim-loc Anterior Cervical Plate System Plates - one level 22-37mmDY298 Slim-loc Anterior Cervical Plate System Plates - two level 39-53mmDY299 Slim-loc Anterior Cervical Plate System Plates - three level 54-78mmDY300 Slim-loc Anterior Cervical Plate System Screws - Self Tapping 4.5 x 12-26mmDY301 Slim-loc Anterior Cervical Plate System Screws - Large Diameter 4.8 x 12-16mmDY302 Slim-loc Anterior Cervical Plate System Screws - Self Drilling 4.5 x 12-18mmDY303 Monarch Spinal System Typhoon Cap and Domed Nuts One size onlyDY304 Monarch Spinal System Hooks - Open (Pedicle/Narrow 5-11mm
Tapered/Wide Blade)
DY306 Isola System (Titanium) Threadless TRC - open body with or 1/4" & 3/16"without rod
PART A - Prostheses List by Category, Groups and Sponsor Page 358 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY309 Frontier Anterior Scoliosis System Bone Screws 5.5 x 25-40mm, 6.5 x 25-60mm, 7.5 x 35-60mm
DY310 Frontier Anterior Scoliosis System Spinal Rod 4.75 x 200-450mmDY311 Frontier Anterior Scoliosis System Twist on Internal Cap One size onlyDY313 Monarch Spinal System Rods - Pre Cut/Lordosed 6.35 & 5.5mm x 45 - 95mmDY316 Isola System (Stainless Steel) Eye Rod Connector Open or Closed 1/4" & 3/16"DY317 Isola System (Stainless Steel) Band Clamp Connector or Tandem 1/4" & 3/16"DY318 Isola System (Stainless Steel) Pre-Cut Rod 3/16" x 35 - 90mmDY322 Carbon Fibre Interbody Fusion Device Stackable C/F Cage System Wedges 11 Degree Small-LargeDY327 Frontier Anterior Scoliosis System Staple/Washer One size onlyDY356 SB Charite Disc Prosthesis End Plates Parallel & Oblique 1 - 5DY359 Sliding Core - 7.5 -11.5mm, 8.5mm, 10.5mmDY406 Leopard 5 Lodotic Carbon Fibre Body Carbon Fibre cage 7 - 18mm
Fusion Device
DY407 Leopard Parallel Carbon Fibre Body Carbon Fibre Cage 7 - 18mmFusion Device
DY420 X-Tenz Telescopic VBR Cage 16mmDY421 X-Tenz Telescopic VBR Cage 22mmDY422 Saber Cage PLIF Cage Parallel/WedgeDY429 X-Tenz Telescopic VBR Cage 26mmDY430 X-Tenz Telescopic VBR Cage 28mmDY431 Expedium Spine System Si Polyaxial Screw 5,6 or 7mm diameter x 25-55mm lengthDY432 Expedium Spine System Si Screw Set one sizeDY434 Expedium Spine System Dual Connectors VariousDY435 Expedium Spine System Rod 5.5mm diameter x 12-48cmDY436 Expedium Spine System Rod - Prelordosed 5.5mm diameter x 35-95mm lengthDY437 Expedium Spine System Hooks (Pedicle, Reduced, Angled, one size
Narrow, Wide)
DY438 Expedium Spine System Hooks (Left/Right Angled, Left/Right One sizeOffset, Extended Body)
PART A - Prostheses List by Category, Groups and Sponsor Page 359 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY439 Expedium Spine System Di Set Screw one sizeDY440 Expedium Spine System Di Polyaxial Screw 5, 6, or 7mm diameter x 25-55mm lengthDY441 Expedium Spine System Monoaxial Screw 4.35, 5, 6, 7 or 8mm diameter x 25-
55mm length
DY445 Saber Cage System Posterior Lumbar Interbody Fusion VariousCarbon Fibre Reinforced Polymer (CFRP) Cage - wedged plate 5/10 plate
DY446 Saber Cage System Posterior Lumbar Interbody Fusion VariousCarbon Fibre Reinforced Polymer (CFRP) Cage - Parallel Cage
DY447 Swift Spine System Titanium Anterior Cervical Plate System - Level 1 size 15 - 29mm Various size plates
DY448 Swift Spine System Titanium Anterior Cervical Plate System - Level 2 size 30 - 42mm various size plates
DY449 Swift Spine System Titanium Anterior Cervical Plate System - Level 3 size 45 - 63mm various size plates
DY450 Swift Spine System Titanium Anterior Cervical Plate System - Level 4 size 60 - 100mm various size Plates
DY451 Swift Spine System Titanium Anterior Cervical Plate System - 46 - 102mm Corpectomy Plate
DY452 Swift Spine System Titanium Anterior Cervical Plate System - 10 - 18mm 3.8mm Self-Drilling/Tapping Screw
DY453 Swift Spine System Titanium Anterior Cervical Plate System - 18mm 4.2mm Self-Drilling/Tapping Screw
DY454 Swift Spine System Titanium Anterior Cervical Plate System - 10 - 28mm 3.8mm Bicortical Screw
DY455 Swift Spine System Titanium Anterior Cervical Plate System - 10mm Graft Screw
Device Technologies Australia Pty LtdDE164 Expandable Spinal Fusion System Composition - titanium, locking ring Dia 4.85/10 - 9/15mm x Length 22 - 25mm
nickel titanium
Howmedica IncorporatedHW384 Xia Spine System Polyaxial Screw Dia 4.5 - 8.5mm Length 25 - 60mmHW385 Xia Spine System Monoaxial Screw Dia 4.5 - 8.5mm Length 25 - 60mmHW386 Xia Spine System Rod Clamp - Parallel, Axial One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 360 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW387 Xia Spine System Lamina Hook - Angled, Reduced, Large Medium, SmallExtended, Standard Blade, Narrow Blade,
HW388 Xia Spine System Pedicle Hook Large, SmallHW389 Xia Spine System Rod - Titanium alloy 70, 100, 480mmHW390 Xia Spine System Cross Link Length 40, 60, 80mmHW391 Xia Spine System Connector - Axial, Dual, Offset One SizeHW392 Xia Spine System Sacral Block One size onlyHW393 Xia Spine System Bone Screw One size only
Mathys AustraliaMA006 Click'X Spinal Fixation System Cap One size onlyMA007 Click'X Spinal Fixation System Pedicle Screw: Preassembled, Length 30-65mm
Spondylolisthesis
MA008 VentroFix Clamp Single, Double, Fracture, Left, RightMA009 VentroFix Locking screw 7.5mm dia, 25-55mm lengthMA010 VentroFix Set screw One size onlyMA011 VentroFix Parallel connector 6.0/6.0mmMA012 CerviFix Posterior Cervical System Clamp Left, Right, Medial, Lateral, Pedicle, MA013 CerviFix Posterior Cervical System Hook Small, Large, Left, RightMA014 CerviFix Posterior Cervical System Rod: Occiput, Straight, Tapered 120 - 250mm lengthMA015 CerviFix Posterior Cervical System Parallel connector 3.5/3.5, 3.5/5.0, 3.5/6.0MA034 Universal Spine System (USS) Sacral Screw 30 - 100mm lengthMA035 Universal Spine System (USS) Sacral Clamp 10 - 16mm, right, leftMA036 Universal Spine System (USS) Pedicle Screw, 3D 6mm dia, length 30mm - 55mmMA116 Vertebral Body Replacement Cage Height 23-71mmMA156 Plif Cage: Cage Contact fusion cage - bone compression Width 8 - 11mm / height 9 - 15mm
screw for PLIF cage
MA215 Cervical Spine Locking Plate (CSLP) Plate - Special Manuf. 22 - 92mm LengthMA216 Cervical Spine Locking Plate (CSLP) Expansion Head Screw 4.0 - 4.5mm dia, 12 - 25mm LengthMA217 Cervical Spine Locking Plate (CSLP) Locking Screw One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 361 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA218 Posterior Cervical Plate System Screw 3.5 - 4.0mm dia, 8 - 40mm lengthMA219 Posterior Cervical Plate System Plate 3 - 5 HolesMA220 Syncage Interbody fusion cage 12 -19mm HeightMA221 Spinal Plate/Plate System AO/ASIF Spinal Notched spinal plates 5 - 13 hole
Implants
MA222 Spinal Plate/Plate System AO/ASIF Spinal Internal fixator - clamps - w/posterior / One size only Implants lateral nut
MA223 Spinal Plate/Plate System AO/ASIF Spinal Internal fixator - rods 7.0mm dia, length 70 - 300mm Implants
MA224 Spinal Plate/Plate System AO/ASIF Spinal Internal fixator - cross link clamp One size only Implants
MA225 Spinal Plate/Plate System AO/ASIF Spinal Internal fixator - cross link rod Rod 3.5, length 40 - 80 mm Implants
MA226 Spinal Plate/Plate System AO/ASIF Spinal Internal fixator - schanz screws 5.0 - 70mm dia, length 180mm, thread 25 Implants -35mm.
MA227 Spinal Plate/Plate System AO/ASIF Spinal Anterior thoracolumbar plate - locking Length 57 - 103mm Implants
MA228 Spinal Plate/Plate System AO/ASIF Spinal Anterior thoracolumbar screws - locking Locking screw 7.5mm, length 25 - 55mm Implants
MA230 Universal Spine System (USS) Rod Length 300 - 500mm,MA232 Universal Spine System (USS) Sacral Hook Small, Medium, Large,MA240 Universal Spine System (USS) Rods Length 40 - 250mmMA241 Universal Spine System (USS) Hook Small, Medium, Large, Lamina, Thoracic,
Pedicle
MA242 Universal Spine System (USS) Pedicle screw 5.0 - 7.0mm dia, 25 - 65mm LengthMA243 Universal Spine System (USS) Pedicle Screw, Polyaxial 5.0 - 9.0mm dia, 30 - 65mm lengthMA244 Universal Spine System (USS) Fracture Clamps Cranial, Standard, Low ProfileMA245 Universal Spine System (USS) Cross Link Clamp 3.5 - 6.0mmMA246 Universal Spine System (USS) Half Ring SS, Standard, Self-HoldingMA247 Universal Spine System (USS) Cross Link Rod 40-80mm length MA248 Universal Spine System (USS) Connectors Parallel, In-line, Transverse, SS, 15 - MA249 Universal Spine System (USS) Safety Screw One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 362 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA250 Universal Spine System (USS) Pedicle Hook Screw Length 20- 40mmMA251 Universal Spine System (USS) Schanz Screws 5-7mm dia MA253 Universal Spine System (USS) Sleeve 3.5 - 6mmMA254 Universal Spine System (USS) Miscellaneous SS, StdMA255 Universal Spine System (USS) Spondylolysthesis Pin Standard, SS.MA277 VentroFix Fracture clamp One size onlyMA292 Universal Spine System (USS) Nut Standard, SSMA293 Universal Spine System (USS) Pedicle Screw Dia 4, 4.2, 8.0mm, length 25 - 65mmMA294 Syncage - C ACIF Cage 4.5 - 10mmMA297 Click'X Spinal Fixation System Head One size onlyMA298 Click'X Spinal Fixation System Pedicle Screw (without head) Length 30-65mmMA299 Cervical Spine Locking Plate (CSLP) Small Stature Plate Length 20-77mmMA300 Cervical Spine Locking Plate (CSLP) VA Screw Dia 4.0 - 4.5mm, length 12-20mmMA301 Cervical Spine Locking Plate (CSLP) Expansion Head Screw Length 18 - 25mm, Diameter 3.5 - MA302 Cervical Spine Locking Plate (CSLP) VA Plate Length 23 - 109mmMA303 Posterior Cervical Plate System Plate 22-33 holesMA304 Posterior Cervical Plate System Plate - rod Special Manufacture - One size onlyMA305 Cervifix Posterior Cervical System Starlock Clamp Upgoing, Neutral, Offset, Offset Neutral,
Left, Right
MA306 Cervifix Posterior Cervical System Nut One size onlyMA307 Cervifix Posterior Cervical System Occiput Screw Length 6 - 22mm, Dia 3.2 - 3.5mmMA308 Cervifix Posterior Cervical System Cancellous Screw Length 8 - 45mm, Dia 3.5 - 4.5mmMA309 Cervifix Posterior Cervical System Cortical Screw Length 8 - 55mm, Dia 3.2, 3.5mmMA319 Universal Spine System (USS) Pedicle screw Length 70 - 140mmMA382 Universal Spine System Low Profile Transconnector 18-83mm lengthMA383 Click'X Spinal Fixation System Monoaxial Screw 25-80mm lengthMA384 SYNCAGE Interbody Fusion Cage, Prefilled 12-19mm HeightMA385 VENTROFIX - MIS Screw 25-65mm
PART A - Prostheses List by Category, Groups and Sponsor Page 363 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA388 Ventrofix - MIS Locking screw Anterior, posteriorMA389 Ventrofix - MIS Double rod implant Monosegmental, bisegmental
Medtel Australia Pty LtdME029 BacFix (Thoracolumbar System) Anterior washer - Titanium alloy Small, standardME030 BacFix (Thoracolumbar System) Multi axial bone screw - Nitinol 5 - 8mm x 30 - 60mmME031 BacFix (Thoracolumbar System) Serrated tooth locking clip - Titanium alloy Nominal, deepME032 BacFix (Thoracolumbar System) Spinal rod, rigid/flex - Titanium alloy 5.5 - 6mm x 50 - 125mmME033 BacFix (Thoracolumbar System) Spinal rod, rigid/flex - Titanium alloy 5.5 - 6mm x 300 - 600mmME034 BacFix (Thoracolumbar System) Non-threaded wedge with serrated teeth - 5.5 - 6mm
Titanium alloy
ME035 BacFix (Thoracolumbar System) Hook - Titanium alloy 6.5 - 11mmME036 BacFix (Thoracolumbar System) Smooth profile flexible angle screw - 5 - 8mm x 30 - 60mm
Titanium alloy
ME037 BacFix (Thoracolumbar System) SpeedLink fixed distance rod - Titanium 5.5 - 6mm x 15 - 35mmME038 BacFix (Thoracolumbar System) SpeedLink adjustable length rod - 5.5 - 6mm x 39.5 - 75mm
Titanium alloy
ME039 AcuFix Cancellous bone screw - Anterior cervical 4mm x 10 - 18mm plate system - Titanium
ME040 AcuFix Self tapping wide root screw - Anterior 4mm x 10 - 18mmcervical plate system - Titanium
ME041 AcuFix Rescue screw - Anterior cervical plate 4.5mm x 10 - 18mmsystem - Titanium
ME042 AcuFix 1 segment SlimLine plate - Anterior 20 - 34mmcervical plate system - Titanium
ME043 AcuFix 2 segment SlimLine plate - Anterior 34 - 54mmcervical plate system - Titanium
ME044 AcuFix 3 segment SlimLine plate - Anterior 47 - 71mmcervical plate system - Titanium
ME045 AcuFix 4 segment SlimLine plate - Anterior 68 - 92mmcervical plate system - Titanium
ME046 AcuFix 2 segment Corpectomy plate - Anterior 34 - 54mmcervical plate system - Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 364 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME047 AcuFix 3 segment Corpectomy plate - Anterior 53 - 77mmcervical plate system - Titanium
ME048 AcuFix 4 segment Corpectomy plate - Anterior 68 - 101mmcervical plate system - Titanium
ME158 AcuFix 1 segment ThinLine plate 20 - 36mmME160 AcuFix 1 segment Ant-Cer dynamic plate 24 - 32mmME161 AcuFix 2 segment Ant-Cer dynamic plate 34 - 54mmME162 AcuFix 3 segment Ant-Cer dynamic plate 50 - 71mmME163 AcuFix 4 segment Ant-Cer dynamic plate 68 - 96mmME170 InFix Interbody Fusion System Endplate Small - LargeME171 InFix Interbody Fusion System Strut Small - LargeME172 InFix Interbody Fusion System Endcap 8-10mm
MedtexMX001 Universal Spinal Instrumentation (Zielke) Consists of - Screws, Threaded Rod, Hex Screws: 6mm dia x 30 to 65mm lengths,
System Nuts, Washer, Endplate 5mm increments. Threaded Rod: 4mm dia x 200 & 300mm lengths. Hex Nuts: 4mm. Washer: 16 - 18mm dia, 2mm increments. Endplate: 12mm diameter 14mm diameter 17mm diameter
Medtronic Australasia Pty LtdMC293 Vertex Spinal System Occipital Plate 24 - 40 mm lengthMC294 Vertex Spinal System Occipital Buttons Bolt 6 - 30 mm LengthMC295 Vertex Spinal System Pre - curved rod 150 - 300 mm lengthMC296 Vertex Spinal System Occipital Screws 3.0 - 5.0 mm diameter, 4 - 30 mm lengthMC298 DIAM Nucleus Sterile 6 - 16 mmMC307 Vertex Spinal System Occipital Buttons Nut 12mm Diameter
Medtronic Sofamor Danek Australia Pty LtdSD003 Colorado Spinal System Colorado 2 Hook, Pedicular hook - small
and large, Laminar hook - small, medium and large, Staple for pedicular hooks,Closed laminar thoracic hook, Supra laminar median hook,Narrow laminar - 1 size, Closed laminar - 1 size
PART A - Prostheses List by Category, Groups and Sponsor Page 365 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD004 Colorado Spinal System Colorado 2 Connector For 5mm rod and 5.5mm rodSD005 Colorado Spinal System Colorado 2 ClampSD008 Interfix C Carbon Cage Diameter range from 12 - 20mm, Length
range from 20 - 29mm
SD009 Affinity Cervical Cage - D7 - L12 to D9 - L14SD010 Colorado Spinal System Colorado 2 Rod 5.0mm and 5.5mm, length range 50 - SD012 Colorado 2 Pedicle Screw Diameter 5.5 - 7.5 Lengths 30 - 70mmSD022 CD Horizon Nut/Plug, DDT Nuts, double threaded Each in one size
screw nots, plug for closed implants, threaded screw plug
SD023 TSRH Spinal Implant System 3D -Staple, Two hole - left, right Two pronged 16 - 36mmSD024 TSRH Spinal Implant System 3D - Rod Diam 4.75 - 6.35mm, Length 25mm - SD025 TSRH Spinal Implant System 3D - Hook, Offset, left, right, laminar, Large - small
pedicle, Stainless steel, Titanium
SD026 TSRH Spinal Implant System 3D - Plate, Offset, connector, multi-span, Sacral 20 - 50mm, rest 0.375 - 3.75 sacral
SD027 TSRH Spinal Implant System 3D - Nut, Eyebolt locknot, locknut 1/2 Each in one sizeinch, locking screws, double hex, flush break, universal breakoff
SD028 TSRH Spinal Implant System 3D - Crosslink, Plate, multip-span plate, Sacral 20 - 50mm, rest 0.375 - 3.75 offset plate, sacral plate
SD029 TSRH Spinal Implant System 3D - Bolt Small, medium, largeSD031 Colorado Spinal System Colorado 2 Plate Range length 20 - 60mmSD032 CD Horizon Rod, Stainless Steel, Titanium 40mm to 600mmSD033 TSRH Spinal Implant System 3D - Washer One size onlySD035 CD Horizon Domino 5.5 - 6.35mmSD036 CD Horizon Crosslink, Plate, Multi-span late, Offset 60 - 200mm
plate, Transverse links
SD037 CD Horizon Connector, Lateral open, lateral closed, Connector, Lateral open, lateral closed, closed reduction, DTT Transverse, closed reduction - 1size, DTT TransverseDomino, Connecting cylinder, Closed - 70 - 100mm, Domino - 5.5 - 6.35mmDomino, Connecting Cylinder, Hopf screw, ilio sacral, lateral, Stephanie, axial
PART A - Prostheses List by Category, Groups and Sponsor Page 366 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD038 CD Horizon Bolt, Left, Right One size onlySD039 CD Horizon Block, Right, Left 5 - 7 mmSD040 Cornerstone SRC Cage Staple, Carbon compositeSD041 Cornerstone Cage Sterile and Non-sterile 4, 5, 6, 7, 8, 9, 10mmSD042 CD Horizon Plate, Chopin Intrapedicular 32mm -
52mm, Chopin plate 32 - 36mm
SD044 Novus System ALIF II 10-16mmSD045 Orfil Stainless Steel - Wire Spool 1-350mmSD046 Atlantis Anterior Cervical Plate Plate 19.0mm - 47.5mmSD047 Atlantis Anterior Cervical Plate Plate 50.0 - 60.0mmSD048 Atlantis Anterior Cervical Plate Plate 62.5 - 77.5mmSD049 Atlantis Anterior Cervical Plate Plate 80.0 - 95.0mmSD050 Atlantis Anterior Cervical Plate Plate 100.0 - 110.0mmSD051 Atlantis Fixed Angle Cancellous Screw 10-20mmSD052 Atlantis Variable Angle Cancellous Screw 10-20mmSD053 Dynalok Breakoff Nut One size onlySD054 Dynalok Crosslink Plate 3cm - 16 cmSD055 Dynalok Long Post Bolt 30 - 55mmSD056 Dynalok Short Post Bolt 30 - 55mmSD057 Dynalok Offset, Straight, Extended Connector 5.5 - 6.35mmSD058 Dynalok Washer / Stabiliser One size onlySD059 Colorado Spinal System Staple One size onlySD060 Colorado Spinal System Sacral Plate Left/rightSD061 Colorado Spinal System Ilio-Sacral Plate Left/rightSD062 Colorado Spinal System Connector for Sacral & Ilio-Sacral Plate One size onlySD063 Colorado Spinal System Break off Nut One size onlySD064 CD-Horizon C-ring One size onlySD065 CD-Horizon Staples One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 367 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD066 Novus System Plif Cage: Cage 12 - 50mmSD067 CD Horizon Cannulated Pedicle Screw Diameter 5.5 - 7.5mm, Lengths 25-55mmSD068 CD Horizon Eclipse: 4.5mm Rod 40 - 600mmSD082 Telamon Cage 8 - 16mmSD083 Telamon Titanium Cage 8 - 16mmSD084 Telamon Contour, Carbon Cage 8 - 16mmSD085 Telamon Contour, Titanium Cage 8 - 16mmSD086 Interfix Titanium Cage 12 x 20mm - 24 x 50mmSD087 LordoTec Cage (LT-Cage) Titanium, PEEK 18-28mmSD088 TSRH 3D Screw 30-55mmSD089 TSRH 3D Extended Post Screw 30-50mmSD091 TSRH 3D Connector, 5.5mm 6-12mmSD092 Union Carbon Cage 10 - 16mmSD095 Z Plate II Plate 4cmSD096 Z Plate II Plate 5cmSD097 Z Plate II Plate 6cmSD098 Z Plate II Plate 7cmSD099 Z Plate II Plate 8cmSD100 Z Plate II Plate 9cmSD101 Z Plate II Plate 10cmSD102 Z Plate II Plate 11cmSD103 Z Plate II Plate 12cmSD104 Z Plate II Plate 13cmSD105 Z Plate II Bolt & Nut 30mm - 55mmSD106 Z Plate II Non Breakoff Nut One size onlySD107 Z Plate II Screw 20 - 60mmSD108 Z Plate II Slot Washer One size onlySD109 Axis Cervical Plating System Plate 11mm
PART A - Prostheses List by Category, Groups and Sponsor Page 368 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD110 Axis Cervical Plating System Plate 13mmSD111 Axis Cervical Plating System Plate 15mmSD112 Axis Cervical Plating System Plate Longer than 15mmSD113 Axis Cervical Plating System Screw: Cancellous 6 - 24mmSD114 Axis Cervical Plating System Screw: Cortical 26 - 54mmSD115 Orion Anterior Cervical System Convergent or Divergent Plates 21.5 - 47.5mmSD116 Orion Anterior Cervical System Convergent or Divergent Plates 50 - 60mmSD117 Orion Anterior Cervical System Convergent or Divergent Plates 62.5 - 77.5mmSD118 Orion Anterior Cervical System Convergent or Divergent Plates 80 - 95mmSD119 Orion Anterior Cervical System Convergent or Divergent Plates 100 - 110mmSD120 Orion Anterior Cervical System Cancellous Screw 10 - 17mmSD121 Orion Anterior Cervical System Locking screw One size onlySD122 TSRH Titanium Spinal Implant System: Washer One size onlySD123 Apofix Support Rod One size onlySD124 Apofix Clamp Single Rod Upper/lowerSD125 Tenor Pedicle Screw (incl Self Breaking Nuts) 30 - 55mmSD126 Tenor Spondylolisthesis Screw - Ti 30 - 55mmSD127 Tenor Transverse Links - Titanium 40-100mmSD128 Tenor Rod (5.5mm) - Titanium 40-180mmSD129 Tenor Monoclamps - Titanium One size onlySD130 Tenor Dual Clamps - Titanium One size onlySD131 Tenor Offset Clamps - Titanium One size onlySD132 CD Horizon Multi-Axial screw (Stainless Steel) 25 - 55mmSD133 CD Horizon Multi-axial screw (Titanium) 25 - 55mmSD134 CD Horizon Fixed Angle Screw (Titanium) 25 - 55mmSD135 CD Horizon Breakoff Set Screw 25 - 55mmSD136 Orfil L-Shaped Rods 5-510mmSD137 Orfil Double Pearl-Tipped Wires 1 - 350mm
PART A - Prostheses List by Category, Groups and Sponsor Page 369 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD138 LIFT/VERTE-SPAN Vertebral Body Cages Short - Extra LongSD139 Novus Systems Cervical Cages 10-16mmSD140 CD Occipital-Cervical Loop CD Occipital-Cervical Loop One size onlySD141 Premier Anterior Cervical Plate System Plates 23 - 90mmSD142 Premier Anterior Cervical Plate System Screws 10 20mmSD170 Danek Unit Rod System Scoliosis Rods Widths 3/16", 5.5mm or 6.35mm; lengths
25 x 45cm
SD171 Danek Unit Rod System Scoliosis S-Rods Widths 5.5 - 6.35mm; left and rightSD172 Tenor Nuts/plug One size onlySD174 LIFT/ VERTE-SPAN End plates (caps) Angulation: -8 - 7 degrees; left and rightSD175 Bryan Cervical Disc System Disc 14 - 18mmSD176 Bryan Cervical Disc System Seal plug One size onlySD177 Vertex Spinal System Connector Length 10 - 13mm; diameter 3.2 - SD178 Vertex Spinal System Plate/rod 80 - 240mmSD179 Vertex Spinal System Rod 80 - 240mmSD180 Vertex Spinal System Screws Dia 3.5 - 4.0mm; length 6 - 24mmSD181 Vertex Spinal System Set screw One size onlySD220 Maverick Artificial Disc Cobalt Chrome 3 Deg Small, Medium and Large; 3 Deg
Small, Medium, Large, Hght 10mm, 12mm and 14mm; 6 Deg Small, Medium and Large; 6 Deg Small, Medium and Large, Hght 10mm, 12mm, 14mm.
SD222 CD Horizon Spinal system Sextant Pre- Sextant Rod is made of titanium with the 5.5 x 25mm to 5.5 x 350mmBent Rod kit inclusive of rod insertion system
SD223 Prestige Artificial Cervical Disc 6 x 12mm; 7 x 12mm; 8 x 12mm; 7 x 14mm; 8 x 14mm; 9 x 14mm
SD224 Affinity Anterior cervical cage System The Affinity Cage is constructed of 6 x 12mm; 6 x 14mm; 7 x 12mm; 7 x titanium alloy - kit includes trials, reamers 14mm; 8 x 12mm; 8 x 14mm; 9 x 12mm; and inserters. 9 x 14mm; 10 x 12mm; 10 x 14mm; 11
x 12mm; 11 x 14mm; 12 x 12mm; 12 x
PART A - Prostheses List by Category, Groups and Sponsor Page 370 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD225 Vertex Reconstruction System Crosslink Composition - titanium alloy. The system One size only allows for the adaptation of components from other Sofamor Danek systems to provide for constructs tailor made for
SD226 Vertex Reconstructive System Laminar Composition - titanium alloy 4.5mm / 5.5mmSD227 Axis Cervical Plating System Portico Laminoplasty Open Door PlateSD228 Axis Cervical Plating System Portico Laminoplasty Open Door Graft PlateSD229 Axis Cervical Plating System Portico Laminoplasty French Door PlateSD230 Axis Cervical Plating System Portico Laminoplasty ScrewSD231 CD Horizon System SMA Staple Length 4-10mmSD232 CD Horizon System SMA Staple Length 12-18mmSD237 Equation Spinal System Screw Length 25-55mmSD238 Equation Spinal System Rod Length 50-300mmSD239 Equation Spinal System Plate Length 40-200mmSD240 Equation Spinal System Set Screw One Size OnlySD241 Union Verte-Stack Flat Small 12-20mmSD242 Union Verte-Stack Lordotic Small 12-20mmSD243 Union Verte-Stack Flat Large 12-20mmSD244 Union Verte-Stack Lordotic Large 12-20mmSD245 Union Verte-Stack Centre Piece Small 5-40mmSD246 Union Verte-Stack Centre Piece Large 5-40mmSD247 TSRH 3D Connector Small, Medium, LargeSD249 Z Plate System Vantage plates and Screws; Thoracic Plate 3.5 - 8cmSD250 Z Plate System Vantage Plates and Screws; Thoracic 5.5 x 15-50mmSD251 Z Plate System Vantage Plates and Screws; ATL Plate 4 - 10cmSD252 Z Plate System Vantage Plates and Screws; ATL Screw 6.5 x 30-55mmSD253 Z Plate System Vantage Plates and Screws; Staple One Size Only
(rostral/caudal)
SD254 Z Plate System Vantage Plates and Screws; Lock Nut One Size Only
PART A - Prostheses List by Category, Groups and Sponsor Page 371 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD255 Atlantis System Element Express Kit Includes Plate, 4 Plate 23 - 45mmScrews, Screwdriver Shaft, Screwdriver Handle
SD256 Nucleus Replacement Spinal Disc Thickness 5-25mm, Diameter 10-50mmSD271 Verte-Stack XS Centre Piece. Stackable Corpectomy Height 5-25mm
Device.
SD272 Verte-Stack Capstone Cage. Vertebral Body Spacer Length: 22-36mmSD273 CD Horizon X10 Crosslink Fixed Plate: 16-31mmSD274 CD Horizon X10 Crosslink Multi-Span Plate: 25-81mmSD275 CD Horizon Legacy In-Line Connector Length 40-110mmSD276 CD Horizon Eclipse Dual Head Screws 20-60mmSD277 CD Horizon Spire Plate One sizeSD312 Engage Washer 6.35mm
Orthotech Pty LtdOH033 Synergy Spinal System Rods 5cm - 14cmOH034 Synergy Spinal System Rods 30 - 60cmOH035 Synergy Spinal System Sliders 4.75 - 6.35mm diaOH036 Synergy Spinal System Hex Nut / Cap Nut 3mmOH037 Synergy Spinal System Open/Closed Screws 5.5 to 8.0mm diaOH038 Synergy Spinal System Open/Closed Offset Hooks 4mmOH039 Synergy Spinal System Open/Closed Hooks Pedicle/Laminar 4.75 - 6.35mm diaOH040 Synergy Spinal System Adjustable Transverse Connector With 3 - 6cm
Rod/Clamp
OH041 Synergy Spinal System Fixed Transverse Connectors 10.5 - 31.5mmOH042 Synergy Spinal System Lateral Connectors (Closed Rod) 4.75 - 6.35mmOH043 Synergy Spinal System Point/Double Hex Set Screw 4.75 - 6.35mmOH044 Synergy Spinal System C-Ring 4.75 - 6.35mmOH045 Synergy Spinal System Infant Hooks 4.75mmOH046 Synergy Spinal System Washers Single/Double 16mm - 21mmOH047 Synergy Spinal System Variable Locking Screws 6.5 - 7mm
PART A - Prostheses List by Category, Groups and Sponsor Page 372 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
OH048 Synergy Spinal System Variable Locking Screw Seat 6.35mmOH049 Synergy Spinal System Variable Locking Screw Nut 13.8mmOH050 Synergy Spinal System Variable Locking Screw Reduction Seat 6.35mmOH051 Synergy Spinal System Iliac Screw 6.0 - 10.0mmOH058 Synergy Spinal System Growth Rod 30 - 60cmOH063 Anterior Cervical Plate System Titanium Locking Plate 20 - 140mmOH064 Anterior Cervical Plate System Titanium Cancellous Bone Screw 4 - 20mmOH123 GEO Structure Vertebral Cage - Alif 3 dimensional titanium intervertebral cage One size onlyOH129 Posterior Lumbar Cage Titanium or PEEK Height 7 - 20mmOH130 Non-Fusion Spine Stabilising Device Titanium or PEEK Height 8 - 16mmOH131 Fidji Cervical Cage 12 x 15, 12 x 17, 14 x 17, 14 x 19OH132 Optima Spinal System - Transverse Link Small, Medium, Large
Assembly
OH133 Optima Spinal System - Set Screw One size onlyOH134 Optima Spinal System - Rod Dia 5-7mm, length 40-400mmOH135 Optima Spinal System - Monoaxial Dia 4-8mm, length 20-60mm
Pedicle Screw System
OH136 Optima Spinal System - Polyaxial Pedicle Dia 4-8mm, length 20-60mmScrew System
OH174 Omega 21 Spine Fixation System Screw, Self Tapping, 4.75mm, 5.5mm, 25mm - 65mm6.35mm, 7.5mm, 8.5mm diameter
OH175 Omega 21 Spine Fixation System Connection Rod, Titanium 105-155mmOH176 Omega 21 Spine Fixation System Simple Coupling, Slotted; Titanium One size onlyOH177 Omega 21 Spine Fixation System Multidirectional Coupling, Slotted; Titanium One size onlyOH178 Omega 21 Spine Fixation System Screw, Spondylolisthesis, 4.75mm, 25mm - 65mm
5.5mm, 6.35mm, 7.5mm diameter
OH179 Omega 21 Spine Fixation System Connection Rod, Titanium 165-255mmOH180 Omega 21 Spine Fixation System Connection Rod, Titanium 35-95mmOH181 Spinelink Spinal Fixation System Polydirectional Screws, Titanium (5.5,6.5,7.5, 8.5mm) x (35-60mm)OH182 Spinelink Spinal Fixation System Lock Nut, Titanium Standard or Extended
PART A - Prostheses List by Category, Groups and Sponsor Page 373 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
OH183 Spinelink Spinal Fixation System Link, Standard or Reverse, Ti 21mm - 78mmOH184 Spinelink Spinal Fixation System Space Washer, Titanium One size onlyOH185 Spinelink Spinal Fixation System End Cap, Titanium One size onlyOH186 OMEGA 21 Spine Fixation System Multidirection Coupling, Titanium One size onlyOH187 OMEGA 21 Spine Fixation System Rods, Titanium 40mm, 60mm, 80mmOH188 OMEGA 21 Spine Fixation System Locking Nut, Titanium One size onlyOH189 OMEGA 21 Spine Fixation System Transverse Rod Connector , Titanium One size onlyOH190 Omega 21 Spine Fixation System Screw, Expandable, 5.5mm, 6.35mm, 25mm - 65mm
7mm, 8mm
OH191 Omega 21 Spine Fixation System Hook titanium - Pedicle/Lt & Rt 6, 8, 10mmAngle/Wide/Narrow/Reduced
OH192 Spinelink Spinal Fixation System Link, Telescoping, Transverse, Ti 40-59mm, 59-90mmOH194 Array Spinal System Titanium Alloy Modular Spinal System - 5.5mm x 510mm
Alloy rod
OH195 Array Spinal System Titanium Alloy Modular Spinal System - 5.5mm x 30 - 100mmPre-Bent Rod
OH196 Array Spinal System Titanium Alloy Modular Spinal System - one sizeset screws
OH197 Array Spinal System Titanium Alloy Modular Spinal System - Large, Medium, Small, Xsmall, 24mm, cross connector 22mm, 20mm, 18mm, 16mm
OH198 Array Spinal System Titanium Alloy Modular Spinal System - one sizelaminar hook and pedicle hook
OH210 Array Spinal System Titanium Alloy Modular Spinal System - 5.5 - 7.5mm x 30 - 55mmfixed screw
OH211 Array Spinal System Titanium Alloy Modular Spinal System - 5.5 - 7.5mm x 30 - 55mmmultiaxial screw
Stryker Australia Pty LtdSK025 Xia Spine System Thoracic laminar hook blocker One size onlySK042 Xia Spine System Transverse Process Hook, Right and Left One Size OnlySK043 Xia Spine System Thoracic Laminar Hook, Washer One size onlySK044 Xia Spine System Multi Axial Connector Monobloc 17, 19, 21, 23, 26mm; Small
29, 31, 35mm; Standard 38, 42, 50mm
PART A - Prostheses List by Category, Groups and Sponsor Page 374 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK080 Xia Spine System Multi Axial Connector Monobloc 17,19,21,-23,26mm, Small 29,31,35mm, Standard 38,42,50mm
SK085 Centaur Union Rods Dia 6mm, length 60-160mmSK087 Centaur Rod Main Screw Set Dia 7mm, length 25-55mmSK089 Centaur Rod Tightening Screw Dia 5, Length 10mmSK093 Xia Spine System Rod Dia 6mm, length 40-130mmSK112 Xia Spine System Buttress thread locking nut One size onlySK113 Centaur Rod connector set One size onlySK339 VBOSS Titanium End Caps (Round shape) Size 10, 12, 14,
16, 20, 25 (Small & Medium) - 0 and 5 degrees. End Caps (Oval shape) Size 20 & 25 (Small & medium) - 0, 5, & 10
ST002 Diapason Millenium - Long Arm Sacral Titanium Alloy 40-60mm lengthST010 Diapason Millenium - Long Arm Thoracic Titanium Alloy 30-55mm length
Screw
ST042 Diapason Millenium - Thoracic Screw, Titanium Alloy 5,5.5, 6.7 & 7.7mm diameter. 30-60mm 5mm, 5.5mm, 6.7mm & 7.7mm
ST048 Diapason Millenium - Sacral Screw, 8mm Titanium Alloy 8mm length or 9mm
ST057 Diapason Millenium - Long Arm Lumbar Titanium Alloy 6.7mm diameter; 30-60mm lengthScrew
ST058 Diapason Millenium - Long Arm Lumbar Titanium Alloy 7.7mm diameter; 30-60mm lengthScrew
ST680 Centaur Rod main screw set Diameter 5.5 mm Length 25-55mmST681 Centaur Secondary screw titanium alloy 5.5 & 7mm - from 25-55mm in 5mm
increments
ST682 Centaur Rod titanium alloy 4mm Length 60 - 160mmST683 Centaur Plate titanium alloy, straight, lordotic, 30-90mm in 10mm increments
kyphotic
ST684 Centaur Plate support titanium alloy One size onlyST685 Dimso/Stryker Implants Diapason Screw - short arm + ball ring titanium, 5, 5.5, 6.7, 7.7, 8, 9mm by 30-60mm
thoracic, lumbar, sacral with 5mm increment
PART A - Prostheses List by Category, Groups and Sponsor Page 375 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST686 Dimso/Stryker Implants Diapason Screw - short arm + ball ring titanium , 5, 5.5, 6.7, 7.7, 8, 9mm by 30-60mm diapason millenium- thoracic, lumbar, with 5mm increment
ST687 Dimso/Stryker Implants Diapason Screw -long arm 5.5, 6.7, 7.7mm by 30-60mm by 5mm increment
ST688 Dimso/Stryker Implants Diapason Screw -long arm + ball ring titanium, 5.5, 6.7, 7.7, 8mm by 30-60mm by 5mmdiapason millenium- thoracic, lumbar, increment
ST689 Dimso/Stryker Implants Diapason Transverse - Domino titanium One size onlyST690 Dimso/Stryker Implants Diapason Transverse rod union titanium 10-50mmST691 Dimso/Stryker Implants Diapason Transverse ball links (set of 2) titanium One size onlyST692 Dimso/Stryker Implants Diapason Transverse cross link (set of 2) titanium One size onlyST693 Dimso/Stryker Implants Diapason Transverse - transverse connector One size only
titanium, TLC connector
ST694 Dimso/Stryker Implants Diapason Transverse - transverse bar titanium 50-90mmST695 Dimso/Stryker Implants Diapason Rods titanium 40-210mmST696 Dimso/Stryker Implants Diapason Hook - non offset titanium, narrow, wide, One size only
straight, oblique, lumbar
ST697 Dimso/Stryker Implants Diapason Hook - offset titanium, thoracic - left, Small, LargeST698 Opus Spinal Fixation System Plate - short plates titanium, 2 holes or 3 small, largeST699 Opus Spinal Fixation System Plate - long plates titanium 2 holes or 3 small, largeST700 Opus Spinal Fixation System Screw - short arm titanium 5.5,6.7,7.7,9mm by 35-55mm with 5mm
increments
ST701 Opus Spinal Fixation System Screw - long arm titanium 6.7,7.7mm by 40-50mm with 5mm ST702 Opus Spinal Fixation System Fixation - plate key titanium One size onlyST703 Opus Spinal Fixation System Fixation - plate nut titanium One size onlyST704 Opus Spinal Fixation System Rods titanium 40-90mm with 10mm increment;
90,110,130,150,180, 210mm
ST711 PEEK Interbody Cages Peek lumbar cages poly ether ether Size 9-14mmketone 0, 4 & 8 degree
ST712 PEEK Interbody Cages Solis cages poly ether ether ketone 12/5-12/7 and 14/5-14/7ST792 Opus Spinal Fixation System Rod Bolt, titanium alloy Standard, OffsetST793 Opus Spinal Fixation System Rod Support, titanium alloy 40-120mm
PART A - Prostheses List by Category, Groups and Sponsor Page 376 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST805 Modul ICS Cervical base 0 degree, 4 degree - small, 16mm diameterST806 Modul ICS Cervical endplate 0 degree, 4 degree - 16mm diameterST807 Modul ICS Cervical intermediate part Small, standard - 16mm diameterST808 Modul ICS High thoracic base 0 degree, 4 degree - small and standard,
22mm diameter
ST809 Modul ICS High thoracic endplate 0 degree, 4 degree, 6 degree - 22mm ST810 Modul ICS High thoracic intermediate part Small and standard - 22mm diameterST811 Modul ICS Low thoracic base 0 degree, 4 degree - small and standard,
26mm diameter
ST812 Modul ICS Low thoracic endplate 0 degree, 4 degree, 6 degree - 26mm ST813 Modul ICS Low thoracic intermediate part Small and standard - 26mm diameterST814 Modul ICS Lumbar endplate 0 degree, 4 degree, 6 degree - 28mm ST815 Modul ICS Lumbar intermediate part Small and standard - 28mm diameterST816 Modul ICS Lumbar base 0 degree, 4 degree - small and standard,
28mm diameter
ST893 Stabilis Frame Titanium Frontal Frame 11 - 13mm 8 degreesST894 Stabilis Frame Titanium 15mm - 8 degreesST895 Stabilis Frame Titanium 17mm - 8 degreesST896 Stabilis Bone Graft Delivery Unit - BGDU Titanium BGDU diam 11mmST897 Stabilis Bone Graft Delivery Unit - BGDU Titanium BGDU diam 13mmST898 Stabilis Bone Graft Delivery Unit - BGDU Titanium BGDU diam 15mmST899 Stabilis Bone Graft Delivery Unit - BGDU Titanium BGDU diam 17mmST900 Stabilis Oblique Frame Titanium 11mm - 4 degreesST901 Stabilis Oblique Frame Titanium 13mm - 4 degreesST902 Stabilis Oblique Frame Titanium 15mm - 4 degreesST903 Stabilis Oblique Frame Titanium 11mm - 8 degreesST904 Stabilis Oblique Frame Titanium 13mm - 8 degreesST905 Stabilis Oblique Frame Titanium 15mm - 8 degreesST906 Stabilis Frontal Frame Titanium Frontal Frame 11 - 13mm - 4 degrees
PART A - Prostheses List by Category, Groups and Sponsor Page 377 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST907 Stabilis Frontal Frame Titanium 15mm - 4 degreesST908 Stabilis Frontal Frame Titanium 17mm - 4 degreesST909 Stabilis Oblique Frame Titanium 11mm - 0 degreesST910 Stabilis Oblique Frame Titanium 13mm - 0 degreesST911 Stabilis Oblique Frame Titanium 15mm - 0 degreesST914 Reflex Anterior Cervical Plate - Screw Titanium, locking Dia 4mm lengths 10 - 14mmST915 Reflex Anterior Cervical Plate - Screw Titanium, locking Dia 4mm Length 16 - 22mmST916 Reflex Anterior Cervical Plate - Screw Titanium, locking Dia 4.5mm Length 12 - 22mmST917 Reflex Anterior Cervical Plate System Titanium, locking 1 Level size, 12 - 22mmST918 Reflex Anterior Cervical Plate System Titanium, locking 2 Level size, 24 - 46mmST919 Reflex Anterior Cervical Plate System Titanium, locking 3 Level size, 39 - 69mmST920 Reflex Anterior Cervical Plate System Titanium, locking 4 Level size, 60 - 84mm
Surgical HouseSU001 Songer Cable System - 2 Crimps Titanium One size onlySU002 Rod 3.5mm CVD Titanium alloy; component of the Olerud 120mm
Cervical System
SU003 Rod 3.5mm CVD Titanium alloy; component of the Olerud 40mmCervical System
SU004 Rod 3.5mm CVD Titanium alloy; component of the Olerud 80mmCervical System
SU071 OGP posterior lumbar rigid screw OGP pedicle screw 6.5 x 35mm , 6.5 x 40mm, 6.5 x 45mmfixation system
SU072 OGP posterior lumbar rigid screw OGP clamp 10,12,14,16,18mmfixation system
SU073 Olerud spinal system: PF blocks Hook/screw & rod spinal system With or without thread, smoothSU074 Olerud spinal system: Threaded rod Hook/screw & rod spinal system 35mm - 180mm x 7mmSU075 Olerud spinal system: pedicle screw Hook/screw & rod spinal system 45-70mm
5mm, 6mm, 7mm
SU076 Cerclage wire Hook/screw & rod spinal system 45-70mmSU077 Cross bar clamp Hook/screw & rod spinal system For 7mm rod, for 6mm rodSU078 Cross bar Hook/screw & rod spinal system 30,45 & 60mm
PART A - Prostheses List by Category, Groups and Sponsor Page 378 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SU079 Lumbar plates Hook/screw & rod spinal system 80mmSU080 Lumbar plates Hook/screw & rod spinal system 90mmSU081 Bone screw Hook/screw & rod spinal system Diam 4,5,6mm 55-70mmSU082 Double loop Hook/screw & rod spinal system Left & right, 3.5 & 5.0mmSU083 Rod straight 40mm Hook/screw & rod Spinal system 3.5mm diamSU084 Rod straight 80mm Hook/screw & rod spinal system 3.5mm diamSU085 Rod straight 120mm Hook/screw & rod spinal system 3.5mm diamSU086 U-Rod 40mm Hook/screw & rod spinal system 3.5mm diamSU087 U-Rod 80mm Hook/screw & rod spinal system 3.5mm diamSU088 U-Rod 120mm Hook/screw & rod spinal system 3.5mm diamSU089 Occiput rod 120mm Hook/screw & rod spinal system 3.5mm diamSU090 Screw link Hook/screw & rod spinal system 0 degrees, 15 degrees, 30 degreesSU091 Bone screw Hook/screw & rod spinal system 3.5 & 4mm diam, leng 16-65mmSU092 Occiput screw Hook/screw & rod spinal system 4mm diam, length14-18 mmSU093 Lamina hook short Hook/screw & rod spinal system Short & long
component, left & right
SU094 Lamina compression hook Hook/screw & rod spinal system c1-clawSU095 Songer cable system Double loop titanium spinal cable plus One size onlySU096 Hartshill: Ransford Occipito-cervical - titanium loop 100 degree 9mm-20mmSU097 Hartshill: Ransford Extra long cross linked - titanium loop 100 degree 45cm x 15mmSU098 Hartshill Rectangle Stainless steel posterior lumbar fusion 5mm diam 3-5cm lengthSU099 Hartshill Rectangle Stainless steel posterior lumbar fusion 5mm diam 6-8cm lengthSU100 Hartshill Rectangle Stainless steel posterior lumbar fusion 5mm diam 9-11cm lengthSU101 Hartshill Rectangle Stainless steel posterior lumbar fusion 5mm diam 12-14cm lengthSU102 Hartshill Rectangle Stainless steel posterior 6mm diam 15-19cm length
thoracic/thoracolumbar fusion system
SU103 Hartshill Rectangle Stainless steel posterior 6mm diam 20-24cm lengththoracic/thoracolumbar fusion system
SU104 Hartshill Rectangle Stainless steel posterior 6mm diam 25-30cm lengththoracic/thoracolumbar fusion system
PART A - Prostheses List by Category, Groups and Sponsor Page 379 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SU105 Hartshill Rectangle Stainless steel posterior 6mm diam 31-36cm lengththoracic/thoracolumbar fusion system
SU106 Hartshill Rectangle Stainless steel posterior 6mm diam 37-44cm lengththoracic/thoracolumbar fusion system
SU107 Hartshill Cervical Posterior occipito-cervical fixation system 25-35mmSU108 Hartshill Cervical Posterior occipito-cervical fixation system 45-55mmSU109 Hartshill Cervical Posterior occipito-cervical fixation system 65-85mmSU110 Hartshill Wire (packet 10) stainless steel 1.2mm diam & 0.9mm diamSU111 Hartshill Horseshoe lumbar interbody fusion 37mm diam - 11-15mm height, 41mm
device-titanium diam - 11-15mm height, 45mm diam - 11-15mm height
SU112 Hartshill Cancellous bone screws for 6.5mm diam - 25-30mm length, 5.5mm Horseshoes/STALIF each diam - 25-30mm length
SU152 Intext Cervical Plate/Intext Screws Intext cervical plate, including (2-part) Plates - width 13mm, height 4mm - 9mmfixation screws width 17mm, height 4mm - 9mm
SU153 Intext Cervical Plate/Intext Screws Intext cervical plate, including (2-part) Screws/Revision Screws - dia 4.4mm, fixation screws length 11 - 18mm
SU170 Screws/Screws Sterile Titanium Dia 5mm, length 30 - 50mmSU171 Cancellous Screws For use with Stalif Implants 5.5mm x 25mm (for use with 37mm
Stalif), 6.5mm x 30mm (for use with 41/45mm Stalif), 6.5mm x 25mm (for use with 41/45mm Stalif)
SU172 Stalif Interbody Spinal Fusion Implant: 37mm x 11, 13, 15mm; 41mm x 11, 13, Retroperitoneal/Transperitoneal 15mm; 45mm x 11, 13, 15mm; 37mm x
17mm, 41mm x 17mm, 45mm x 17mm
SU173 Intext Cervical Plate/Intext Screws Intext cervical plate, including (2-part) Screws/Revision Screws - dia 4.4mm, fixation screws length 11 - 18mm - Pack of 3
Taylor Bryant Pty LtdTB030 Advanced Spine - Titanium System C-Spacer (various lengths) Titanium 5/0mm x 5/0mm to 7/5mm x 6/0mmTB031 Advanced Spine - Titanium System Hex Bolt Titanium 20mm, 25mm, 30mmTB032 Advanced Spine - Titanium System Support Rod 5mm x12.0", 18.0", 22.0"TB033 Advanced Spine - Titanium System Aluminium Master Rod 12", 22"TB034 Advanced Spine - Titanium System Varigrip Lower Hook Titanium (Zone 1, Zone 1/2/3TB035 Advanced Spine - Titanium System Varigrip Upper Hook Titanium (Zone 1, 2, Zone 1/2/3
PART A - Prostheses List by Category, Groups and Sponsor Page 380 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB036 Advanced Spine - Titanium System Clamp Bolt Titanium One size onlyTB096 Advanced Spine - Titanium System 200 Ser Ti Screws/Titanium 5/0 x (30, 35, 40, 45mm); 7/5 x (35, 40,
45, 50, 55mm); 6/5 x (35, 40, 45, 50, 55mm); 5/8 x (40, 45, 50, 55mm)
TB100 Advanced Spine - Titanium System Lower Saddle 1mmTB101 Advanced Spine - Titanium System Lower Saddle 14 Degree Left/Right, 7 Degree
Left/Right, 2mm, 4mm, 6mm Increment, 30 Degree Left/Right
TB105 Low Pro Upper Clamp Upper Clamp 1mmTB106 Low Pro Upper Clamp Upper Clamp 14 Degree Left/Right, 7 Degree
Left/Right, 2mm, 4mm, 6mm Increment, 30 Degree Left/Right
TB110 Support Rod 8inch Rod-Titanium 8 inch - TitaniumTB112 Varilift System Sleeve nut One size onlyTB115 Low Pro Upper Clamp Cross Link Assembly 200 Ser Titanium 7/0cm, 8/0cm, 9/0cmTB172 SL Upper Hook Composition - Titanium Zone 5TB173 SL Lower Hook Composition - Titanium Zone 5TB181 Rabea Peek Vertebral Body Fusion Implant Composition - peek, spinal implant 4, 5, 6, 7 x 12 x 14mm, 8 x 12 x 16mmTB182 Tetris Lumbar Fusion Implant System Titanium or peek, spinal implant 8-12mm x 11mmTB192 Blackstone Medical Inc Anterior Cervical Titanium alloy plate 4.4mm Diameter x 14mm length
Plate System
TB193 Blackstone Top Locking Plate Holds bone screws and anterior cervical One size onlyplate in place
TB194 Blackstone Medical Inc Anterior Cervical Bone Screw, Primary/Rescue Screw 12, 14, 16mmPlate System
TB222 PASS Polyaxial Spine System for Laminar Thoracic and Laminar Lumbar 7, 8, 9.3mmtreatment of Deformities
TB223 PASS Polyaxial Spine System for Special Connecting Clamp for deformities One size onlytreatment of Deformities
TB224 PASS Polyaxial Spine System for Rod - Titanium Dia 6mm, length 260mm/280mmtreatment of Deformities
TB225 PASS Polyaxial Spine System for Rod - Titanium Dia 6mm, length treatment of Deformities
PART A - Prostheses List by Category, Groups and Sponsor Page 381 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB226 PASS Polyaxial Spine System for Rod - Titanium Dia 6mm, length 400/420/440/450mmtreatment of Deformities
TB227 PASS Polyaxial Spine System for Rod - Titanium Dia 6mm, length 500/550mmtreatment of Deformities
TB228 PASS Polyaxial Spine System for Rod - Titanium Dia 6mm, length 600mmtreatment of Deformities
TB229 PASS Polyaxial Spine System for Sacral screw Dia 7.2mm, length 34/38/42/46/50mmtreatment of Deformities
TB230 PASS Polyaxial Spine System for Transverse link Small, Medium, Largetreatment of Deformities
TB231 PASS Polyaxial Spine System for Polyaxial Pedicle and Polyaxial Lumbar 4, 6, 7, 8, 9.3, 10, 11mmtreatment of Deformities Laminar Hooks
TB233 PASS Polyaxial Spine System Rod - Titanium Dia 6mm, length 40mm up to 130mm in 10mm increments; Diameter 6mm, length 150/170/190/210/230/240/250mm
TB234 PASS Polyaxial Spine System Nut for crosslink One size onlyTB235 PASS Polyaxial Spine System Crosslink Length 40mm up to 70mm in 5mm TB236 PASS Polyaxial Spine System Sacral Plate (Left and Right) One size onlyTB237 PASS Polyaxial Spine System Connecting/Realignment Clamps One size onlyTB238 PASS Polyaxial Spine System Polyaxial Cyl. Pedicular Screw with Nut Diameter 4.5 to 8.0mm, Length 31mm to
54mm
TB239 Spinal Fixation System Multi Axial Cross Connector Assembly - 30mm - 75mm in 5mm incrementsTitanium
TB240 Spinal Fixation System Multi screw - Titanium 5.5 x 35mm up to 55mm in 5mm increments; 6.5 x 35mm up to 60mm in 5mm increments; 7.5 x 35mm up to
TB241 Spinal Fixation System Rod - Titanium 40mm to 100mm in 10mm incrementsTB242 Spinal Fixation System Rod - Titanium 110 to 200mm in 10 and 20mm
increments (110, 120, 140, 160, 180,
TB243 Spinal Fixation System Set screw spinal system One size onlyTB247 Blackstone - Spinal Fixation System - Composition - Titanium 5.5mm x 40mm, 5.5mm x 45mm, 6.5mm
Mono Axial Screws x 40mm and 6.5mm x 45mm
TB288 Medicrea - Cross-sectional Polyaxial screw Composition Titanium one size onlyTB289 Medicrea - Rod-Plate 2 levels Composition Titanium Small, Medium and Large
PART A - Prostheses List by Category, Groups and Sponsor Page 382 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB293 Spinewave - Cartridge Wafer Assembly Composition: Peek 8/10mm X 20/25/30mm
TiMax Surgical Pty LtdTI077 Merries PROT Cage Spinal Cage - Titanium 55 - 11mm x 7 - 13mmTI078 Merries PROT Pedicle Screws Posterior Spinal Pedicle Screws - 5-7mm, 30-50mmTI079 Merries PROT Spine Rod Posterior Spinal Rod - Titanium 5.5, 45-90mmTI080 Merries PROT Spine Rod Posterior Spinal Rod - Titanium 5.5, 105-200mmTI081 Merries PROT Spine Plate Posterior Spinal Plate - Titanium 2-3 hole, 47-72mmTI082 Merries PROT Hooks Posterior Spinal Spinal/Pedicle Hooks - 5-7mm x 6.5-8mm
Titanium
TI083 Merries PROT Connector Posterior Spinal Connector - Titanium 21.5-26.5, RL 10 deg & LR 10 degTI084 Merries PROT Washer Posterior Spinal Washer oblique - ObliqueTI085 Merries PROT Transverse Link Posterior Spinal Transverse Link rod/plate Rod - 55-90 mm, plate- 65 mm
- titanium
ZimmerZI330 Trabecular Metal Spinal Devices Composition - Trabecular Metal Various heights, sizes and diametersZI475 Silhouette Spinal System Implants Polyaxial Screw Assembly with Tabs 5.5 x 25mm to 8.5 x 60mmZI477 Silhouette Spinal System Implants Nut, Connector, Transverse 1 sizeZI478 Silhouette Spinal System Implants Transverse, Connector, Insert 1 sizeZI479 Silhouette Spinal System Implants Nut, Locking, Polyaxial 1 sizeZI480 Silhouette Spinal System Implants Connector, Transverse, Solid 12 - 90mm lengthsZI481 Silhouette Spinal System Implants Rod 5.5 dia x 10cm, 20cm and 47cm lengthZI482 Spine-Tech BAK Cervical Implant Cervical Cage 6 x 12mm, 8 x 12mm, 10 x 12mm, 12 x ZI483 Spine-Tech BAK "L" Cage Lumbar Cage 9 x 20mm, 9 x 24mm, 11 x 20mm, 13 x
20mm, 13 x 24mm, 15 x 20mm, 15 x 24mm, 17 x 24mm, 17 x 28mm
PART A - Prostheses List by Category, Groups and Sponsor Page 383 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Pins, Bone
B Braun Australia Pty LtdBB071 Kirshner Wires all Sizes Steel Dia 0.8mm-3.0mm, Length 70mm- To be funded where
any or all K-wires used in a procedure are used as an implant.
Biomet Australia Pty LtdBI232 Moore Pins Scan Pin, Stainless Steel 16mm x 51-152mmBI298 Rush Intramedullary Pins Stainless Steel 2.4-6mm x (30-440mm)BI302 Knowles Hex Drive Pins Stainless Steel 4.0, 4.7mm x (57-152mm)BI303 Rush Intramedullary Pins Stainless Steel 2.4mm x (30-35mm)BI304 Rush Intramedullary Pins Stainless Steel 3.2mm x (100-250mm)BI305 Rush Intramedullary Pins Stainless Steel (2.4, 4.8)mm dia x (30-360)mmBI306 Rush Intramedullary Pins Stainless Steel 6.4mm x (280-440mm)
De Puy AustraliaDP088 Orthosorb Absorbable Pin Orthosorb - Polydiaxanone Fixation Pins 2mmDP089 Orthosorb Absorbable Pin Orthosorb Pkt3 - Polydiaxanone 40mm x2mmDP090 Orthosorb Absorbable Pin Orthosorb Pkt 3 - Polydiaxanone 1mm x 40mm x 1.3mmDP091 Orthosorb Absorbable Pin Orthosorb Pkt 1 - Polydiaxanone 40 x 2.0mmDP092 Orthosorb Absorbable Pin Orthosorb K Wire - Stainless Steel 1 x 40mm x 1.3mm Pk 3
Tapered Pins
DP093 Orthosorb Absorbable Pin Orthosorb -Polydiameterxanone 1.3mmDP094 Orthosorb Absorbable Pin Orthosorb Pk 2 - Polydiaxanone 40mm x 2.0mmDP095 Orthosorb Absorbable Pin Orthosorb Arthroscopic Fix-Set - 1.3MM
Polydiaxanone
DP572 Nancy Nail System Pediatric Flexible Nail 2.0 mm x 130mmDP892 Rockwood Clavical Pin Rockwood Clavicle Pin + Nut S/S 2.5 to 4.5mmDP893 Rockwood Clavical Pin Nut Clavical Pin S/S 2.5 to 4.5mmDY272 Clavicle Pin (Sterile) Clavicle pin assembly 2.5-4.5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 384 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Device Technologies Australia Pty LtdDE070 TransFix Implant Screw System - Titanium alloy 40mm & 50 mmDE124 Fixion Hip Pin Stainless Steel Diameter 5mm x length 60-100mmDE129 Fixion Peg Stainless steel peg with inflatable distal Diameter 8mm x lengths 80, 90, 100,
110, 120mm
Howmedica IncorporatedHW362 Osteo Kirschner Wire Kirschner - Stainless Steel 28-62 x 4/9 To be funded where
any or all K-wires used in a procedure are used as an implant.
HW363 Osteo Kirschner Wire Kirschner Threaded - Stainless Steel 28-62 x 4/10 To be funded where any or all K-wires used in a procedure are used as an implant.
HW368 Osteo Kirschner Wire K wire - Stainless Steel 1.5mm To be funded where any or all K-wires used in a procedure are used as an implant.
HW369 Osteo Kirschner Wire K wire - Stainless Steel 2.0mm To be funded where any or all K-wires used in a procedure are used as an implant.
Johnson & Johnson Medical Pty LtdJJ024 Cross Pin - 6.5mm x 40, 50mm lengthsJJ420 MiniLok Quick Anchor Plus with Anchor composition is PLA MiniLok Quick Anchor Plus # 0 Suture
OS-2 Needles; MiniLok Quick Anchor Plus # 2/0 Suture V5 Needles
JJ421 MicroFix Quick Anchor Plus with Anchor composition is PLA MicroLok Quick Anchor Plus with 3/0 Ethibond Suture Ethibond Suture and V4 Needles;
MicroLok Quick Anchor Plus 4/0 Ethibond Suture and C1 Needles; MicroLok Quick Anchor Plus with 4/0
JJ422 MiniLok Quick Anchor Plus with Panacryl Anchor composition is PLA MiniLok Quick Anchor Plus # 2/0 Suture RB1 Needles
JJ424 Panalok RC Loop Anchor with Ethibond Anchor composition is PLLA One size onlySuture
PART A - Prostheses List by Category, Groups and Sponsor Page 385 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ425 Panalok RC Loop Anchor with Panacryl Anchor composition is PLLA One size onlySuture
JJ426 Bioknotless RC Anchor with Panacryl Anchor composition is PLLA One size onlyJJ427 Panalok Loop Anchor with Panacryl Anchor composition is PLLA One size onlyJJ428 BioFastin RC Anchor with Ethibond Suture Anchor composition is PLLA One size onlyJJ429 Bioknotless RC Anchor with Ethibond Anchor composition is PLLA One size onlyJJ430 BioFastin RC Anchor with Panacryl Suture Anchor composition is PLLA One size onlyJJ431 Panalok Loop Anchor with Ethibond Anchor composition is PLLA One size only
Link Orthopaedic AustraliaLO100 LINK Arthrodesis Pin Cobalt Chromium 90mmLO101 LINK Arthrodesis Pin Tilastan 90mm
Mathys AustraliaMA086 AO/ASIF K-Wires, Pins, Washers Seldrill 4.0/3.0mm & 4.0 - 6mm / 80 - 250mm LMA159 AO/ASIF K-Wires, Pins, Washers etc - Steinmann pins/schanz screws 4.5 / 5.0 / 3.5 / 3.0 / 4.0 , length 60 - 300
mm, T
MA162 AO/ASIF K-Wires, Pins, Washers etc K-wire single/double ended 0.60 - 3.00mm, length 70 - 400mm To be funded where any or all K-wires used in a procedure are used as an implant.
MA163 AO/ASIF K-Wires, Pins, Washers etc K-wire double ended 0.60mm - 3.00 mm, length 70 - 150mm To be funded where any or all K-wires used in a procedure are used as an implant.
MA164 AO/ASIF K-Wires, Pins, Washers etc K- wires 0.25mm-4.0mm dia 20.0 - 250.0mm L To be funded where any or all K-wires used in a procedure are used as an implant.
MA165 AO/ASIF K-Wires, Pins, Washers etc Steinmann pins/schanz screws/seldrills 2.0mm-8.0mm dia 20mm - 300mm LMA381 AO/ASIF K Wires, Pins Washers - Hybrid Pins - Spade point wires/reduction 1.8, 2.0mm Diameters
Steel/Ti Sterile & Non Sterile wires
Medical & Optical Instruments Australia Pty LtdMO162 Tension Band Pin Stainless Steel 50 to 90mm
PART A - Prostheses List by Category, Groups and Sponsor Page 386 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Smith & Nephew Surgical Pty LtdSN438 Hip Pin Cannulated 30-135mmSN445 Steinmann Pins Skeletal Traction Pin-Cove Point 150-200mmSN446 Steinmann Pins Skeletal Traction Pin-Cove Point 250mm+SN447 Steinmann Pins Non Threaded, Various Tips 9"x5/64 - 9"x3/16SN448 Steinmann Pins Threaded, Various Tips 19mm & 28.5mmSN461 Bone Staple Fixation Staple 1.16x 1.2- 3.8 x1.2-3.4. Staple
3.32 x 5.8-7.8 x 3.4. Staple with Spikes XSM- Large. Staple W/O Spikes XSM- Large. Trac Pin 9"
SN462 Bone Staple Fixation - Scaphoid Staples Scaphoid Staple S,M, M- Long & Large SN463 Bone Staple Fixation - Osteotomy Fixation Staple 5mm- 14mm. McConnel
HTO PF 15mm 0-S
SN464 Bone Staple Fixation - Short Leg Xsmall - largeSN465 Bone Staple Fixation - Table Small -Medium 13mm - 16mm. SN466 Bone Staple Krackow HTO 12,14,16mmSN630 Cannulated Hip Pins Knowles 1.8 x 2 - 5.32 x 5 1/2. SN631 Cannulated Hip Pins Rush Nails, Round Bevil Point Hook Pins 2.3mm Diameter 25.4mm- 101.6mmSN632 Cannulated Hip Pins Rush Nails, Round Bevil Point Hook Pins 3.1mm Diameter 101.6mm-254SN633 Cannulated Hip Pins Rush Nails, Round Bevil Point Hook Pins 4.7mm Diameter 20.3mm-35.5mmSN634 Cannulated Hip Pins Rush Nails, Round Bevil Point Hook Pins 6.3mm Diameter 27.9mm-43.1mm
Stryker Australia Pty LtdST007 Stryker Plating System - K Wires Stainless Steel or Titanium 150mm length in 1.25, 1.6, 2.0mm To be funded where
any or all K-wires used in a procedure are used as an implant.
ST890 Steinmann Pins Stainless Steel 7,9"
Surgical HouseSU010 K-Wire (Kirschner) Stainless steel 70mm, 100mm, 200mm length To be funded where
any or all K-wires used in a procedure are used as an implant.
PART A - Prostheses List by Category, Groups and Sponsor Page 387 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SU011 Tac-Pin (Threaded) Compression pin-titanium 1.7mm diam 15-25mm length
Trewavis Surgical Instruments Pty LtdTS002 Trewavis Surgical Steinmann Pins Composition: Stainless Steel, Model Nos: Dia 3.0 - 5.0mm
200 - 950-L to 200-970-Q
Pins, Bone, Absorbable
B Braun Australia Pty LtdBB060 BRAUN AUST Intramedullary Nails Isosorb Resorbable Fixation Pin 2mmx60mm-3.5mmx80mm
Biomet Australia Pty LtdBI275 Lactosorb Suture Anchors Suture Anchor, Lactosorb, PGA/PLA 2.0mm, 3.0mmBI276 Readsorbable Meniscal Staple PGA/PLA 11mm, 13mmBI277 Re-Unite Orthopaedic Bone Pin Bone Pin, PGA/PLA (1-4)mm dia x (20-70)mmBI797 Weil-Carver Hammertoe Implant PGA/PLA One size onlyBI809 Lactosorb Suture Anchor Threaded, PGA/PLA Dia 3.5mm, 5.5mm
De Puy AustraliaDP584 PLA Centraliser Poly Lactic Acid+D108 Centraliser 9-20mm
Device Technologies Australia Pty LtdDE080 Tissue Button PLA 6.5mm - 10mmDE126 Chondral Dart Polylactide Compositition Length 18mmDE127 Bio-Transfix Composition Poly (L-lactide) Diameter 5mm, length 50mm
Johnson & Johnson Medical Pty LtdJJ078 Rigidfix ACL Cross Pin System Polylactic acid pin 2.7 & 3.3mm x 42mmJJ098 Panalok RC Quick Anchor Plus Polylactic acid absorbable anchor 2.9 x 11.0mmJJ099 Panalok Absorbable Anchor Polylactic acid absorbable anchor 4.1 x 6.0mmJJ231 Bioknotless Anchor Anchor composition is PLLA Dia 3.9mm, length 9mmJJ232 Cufftack rotator cuff anchor Composition of anchor is a) tack - Anchor diameter 4.5mm, length 23mm
abosorbable PLA b) pin - absorbable L PLA c) sleeve - Prolene
JJ233 Panalok RC QuickAnchor Plus DS Anchor composed of PLA, Suture Anchor diameter 2.9mm, length 11mmPanacryl Suture composed of PLA and PGA
PART A - Prostheses List by Category, Groups and Sponsor Page 388 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ234 Panalok RC QuickAnchor Plus DS Anchor composed of PLA, Suture Anchor diameter 2.9mm, length 11mmEthibond Suture composed of polyester
Linvatec AustraliaLV008 Preloaded Bio-Anchor Absorbable Suture Soft Tissue Re-attachment - PLLA 3.5mm diameter
Anchor
LV088 SmartPin Resorbable Bone Fixation Pin, Self-Reinforced PLLA 10, 20, 30 & 40mm1.1mm
Plates, Bone
Aus Systems Pty LtdAU001 Aus Systems Titanium Miniplates (Bone 2hole x 2hole Strip Plate Stiff 1.2mm profile, 4, 6, 8mm length between Only to be funded
Plates) inner holes where used in a service for which a Medicare Benefit is payable
Australian Surgical Design & Manufacture Pty LtdAE036 Opening Wedge Tibial Ostectomy Plate Titanium 6mm - 20mm
B Braun Australia Pty LtdBB067 Caspar Cervical Plate Titanium and Steel 24mm-90mmBB068 Caspar Screws Stainless Steel 10mm-28mmBB069 Caspar Screws Titanium 10mm-28mmBB135 Advanced Biomechanical Concept Plate Titanium, rigid Medium 34 - 64mm lengthBB140 Advanced Biomechanical Concept Plate Titanium, rigid Large 67 - 103mm lengthBB153 Advanced Biomechanical Concept Plate Titanium, rigid Small 20 - 32mm LengthBB167 MACS Stabilisation Plates Titanium, rigid Length 45 - 100mm
Biomet Australia Pty LtdBI145 Vari-Angle Hip System Compression Hip Screw, Lag + Plate, 2-14 hole plate, 4.5mm to 15mm screws
Stainless Steel
BI834 EBI XFIX DynaFix System Screw, VS Osteotomy System, Ti 6mm x (30mm-110mm)BI843 EBI XFIX DynaFix System Plate, VS Osteotomy Ti 4 hole, 6 hole
Corin Australia Pty LtdCR039 Corifix Compression Plate System T Plate, Stainless Steel 3,4 or 5 holes
PART A - Prostheses List by Category, Groups and Sponsor Page 389 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
CR052 Corifix Compression Plate System 1/3 Tubular Plates 6-8 holes
De Puy AustraliaDP045 Isola System (Stainless Steel) Double Wire One size onlyDP046 VSP System (Titanium) Pedicle Screw (Standard or +5 No Cut) 4.75-7.75mm x 25-50mmDP049 VSP System (Titanium) Washers - Standard / Tapered 3 & 5mmDP051 VSP System (Titanium) VSP Bone Plate One - Two SlotDP052 VSP System (Titanium) VSP Bone Plate Two ½ - Three ½ or Four - Five SlotDP058 Isola System (Stainless Steel) Modular Cross Connector Hex Nut One size onlyDP060 VSP System (Stainless Steel) Sacral Connector - Left & Right Offset One size onlyDP072 Isola System (Titanium) Modular Cross Connector J-Hooks 1/4 & 3/16"DP073 Isola System (Titanium) Modular Cross Connector Plates 0 - 70mmDP074 Isola System (Titanium) Modular Cross Connector Hex Nut One size onlyDP075 Isola System (Stainless Steel) Modular Cross Connector Plates 0 - 70mmDP076 Isola System (Stainless Steel) Modular Cross Connector J-Hooks 1/4 & 3/16"DP869 Bridge Plates Bridge P.F.P. Femoral / Humeral 90 and 140-170mmDP888 Calcaneal Periarticular Plate Calcaneal Periarticular Plate - Titanium Extra small to Ex LargeDP904 Periarticular Plating System Plate Calcaneal - Titanium Small - LargeDP905 Periarticular Plating System Fibula Composite Plate - Titanium 5 HoleDP906 Periarticular Plating System Medial Pilon Plate - Titanium 3 HoleDP907 Periarticular Plating System Meta Plate - Titanium Sm - Lge 3 HoleDP908 Periarticular Plating System Periarticular Pilon Plate - Titanium 4 to 10 holeDP909 Periarticular Plating System SPIDER Plate.(2p/p) Titanium SmDP910 Periarticular Plating System SPIDER Plate (2p/p) and offset Titanium LgDP911 Periarticular Plating System Meta Plate - Titanium Sm -Lge 5 Hole DP912 Periarticular Plating System Fibula Composite Plate - Titanium 11 Hole DP913 Periarticular Plating System Fibula Composite Plate - Titanium 7 Hole DP914 Periarticular Plating System Fibula Composite Plate - Titanium 9 Hole DP915 Periarticular Plating System Medial Pilon Plate - Titanium 5 Hole
PART A - Prostheses List by Category, Groups and Sponsor Page 390 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP916 Periarticular Plating System Medial Pilon Plate - Titanium 7 Hole DP917 Periarticular Plating System Periarticular Spider Washer - Titanium One size onlyDP921 DOC Ventral Stabilisation System Outer Bone Screw 4.0mm x 12-16mmDP922 DOC Ventral Stabilisation System Inner Bone Screw 12 - 16mmDP923 DOC Ventral Stabilisation System Platform - Straight Non Locking Screw 3.5 - 4mmDP924 DOC Ventral Stabilisation System Platform - Angled Screw 20Deg Lockable 3.5 - 4mmDP927 DOC Ventral Stabilisation System Assembly - Various single or two or three 30-110mm
level
DP928 DOC Ventral Stabilisation System Platform/Cross Connector Locking 3.5 - 4mmScrew or Graft Screw
DY066 Codman Anterior Cervical Plate System Anterior Cervical Plate 24 - 48mmDY069 Codman Anterior Cervical Plate System Anterior Cervical Plate 50 - 70mmDY070 Codman Anterior Cervical Plate System Anterior Cervical Plate 74 - 110mmDY096 DOC Ventral Stabilization System Graft Platform or Cross Connector One size onlyDY121 VSP System (Stainless Steel) Pedicle Screw (Standard or +5 No Cut) 4.75-7.75mm x 25-50mmDY123 VSP System (Stainless Steel) VSP Bone Plate One-Two SlotDY124 VSP System (Stainless Steel) VSP Bone Plate Two 1/2-Three 1/2 SlotDY125 VSP System (Stainless Steel) VSP Bone Plate Four-Five SlotDY127 VSP System (Stainless Steel) Washers - Standard / Tapered 3 & 5mmDY305 VSP System (Titanium) Sacral Connector - Left & Right Offset One size only
Device Technologies Australia Pty LtdDE055 Osteotomy Plates Osteotomy, Tibial - Stainless Steel 5mm - 17.5mmDE078 Osteotomy Plates Osteotomy, Femoral - Stainless Steel 7.5mm - 17.5 mmDE094 Osteotomy Plates Anterior/posterior sloped. Stainless steel 5 - 15mm lengthDE215 Arthrex Osteotomy Plates Metatarsal 2mm - 5mmDE216 Arthrex Osteotomy Plates Tibial, Composition Titanium 3mm - 17.5mmDE217 Arthrex Osteotomy Plates Femoral, Titanium 5mm - 17.5mm
Howmedica IncorporatedHW376 Profyle - Hand and Small Fragment System Condylar Plates - Titanium 1.7mm, 2.3mm
PART A - Prostheses List by Category, Groups and Sponsor Page 391 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Link Orthopaedic AustraliaLO062 LINK Giebel Blade Plates - 50- 80mmLO063 LINK Giebel Blade Plates - Cortical - 6-40mmLO064 LINK May Bone Plates Distal Tibia Plate 80mmLO065 LINK May Bone Plates Distal Tibia Plate 122mmLO066 LINK May Bone Plates Distal Tibia Plate 158mmLO067 LINK May Bone Plates Distal Tibia Plate 194mmLO068 LINK May Bone Plates Distal Tibia Plate 230mmLO069 LINK May Bone Plates Distal Fibular Plate 122mmLO070 LINK May Bone Plates Distal Fibular Plate 158mmLO071 LINK May Bone Plates Distal Fibular Plate 194mmLO072 LINK May Bone Plates Distal Fibular Plate 230mmLO073 LINK May Bone Plates Lateral Proximal Tibia Plate 80mmLO074 LINK May Bone Plates Lateral Proximal Tibia Plate 122mmLO075 LINK May Bone Plates Lateral Proximal Tibia Plate 158mmLO076 LINK May Bone Plates Lateral Proximal Tibia Plate 194mmLO077 LINK May Bone Plates Lateral Proximal Tibia Plate 230mmLO078 LINK May Bone Plates Medical Proximal Tibia Plate 80mmLO079 LINK May Bone Plates Medical Proximal Tibia Plate 122mmLO080 LINK May Bone Plates Medical Proximal Tibia Plate 158mmLO081 LINK May Bone Plates Medical Proximal Tibia Plate 194mmLO082 LINK May Bone Plates Medical Proximal Tibia Plate 230mmLO083 LINK May Bone Plates Distal Femur Plate 80mmLO084 LINK May Bone Plates Distal Femur Plate 122mmLO085 LINK May Bone Plates Distal Femur Plate 158mmLO086 LINK May Bone Plates Distal Femur Plate 194mmLO087 LINK May Bone Plates Distal Femur Plate 230mmLO088 LINK May Bone Plates Proximal Femur Plate 122mm
PART A - Prostheses List by Category, Groups and Sponsor Page 392 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LO089 LINK May Bone Plates Proximal Femur Plate 158mmLO090 LINK May Bone Plates Proximal Femur Plate 194mmLO091 LINK May Bone Plates Proximal Femur Plate 230mmLO092 LINK May Bone Plates Distal Humerus Plate Y-shape: Angle 40deg 122mmLO093 LINK May Bone Plates Distal Humerus Plate Y-shape: Angle 50deg 150mmLO094 LINK May Bone Plates Distal Humerus Plate Y-shape: Angle 30deg 90mmLO095 LINK May Bone Plates Distal Humerus Plate Y-shape: Angle 30deg 120mmLO096 LINK May Bone Plates Distal Humerus Plate Y-shape: Angle 45deg 150mmLO097 LINK May Bone Plates Humerus Plate Proximal - Neutral 80mmLO098 LINK May Bone Plates Humerus Plate Proximal - Neutral 98mmLO099 Schwabe Plates Distal Radius Bone Plates Small & large
Mathys AustraliaMA039 AO/ASIF Plates 3.5mm cloverleaf 3-6 hole, length 104mmMA040 AO/ASIF Plates 3.5mm calcaneal Length 60 - 70mmMA041 AO/ASIF Plates Straight & Curved 3.5mm, reconstruction 5-22 holeMA044 AO/ASIF Plates Steel, left & right, 4.5mm T & L plate, 3-12 holeMA045 AO/ASIF Plates Steel, spoon plate,4.5mm 5-12 holeMA046 AO/ASIF Plates Steel, left & right,4.5mm conylar buttress 7-15 holeMA047 AO/ASIF Plates 3.5mm calcaneal 50-100 LengthMA048 AO/ASIF Plates Steel, left & right, lateral, proximal, tibial, 3-13 hole
buttress, 4.5mm lateral tibial
MA049 AO/ASIF Plates 4.5mm cobra head 8-11 holeMA050 AO/ASIF Plates 1.5mm, straight / T & H shaped / L- 3-20 hole / 9-100mm lengthMA051 AO/ASIF Plates Steel, 3.5mm cloverleaf 3-9 hole / 88 - 184mm lengthMA052 AO/ASIF Plates 2.0mm reconstruction 20 hole, length 100mmMA053 AO/ASIF Plates 2mm condylar plate Left & RightMA054 AO/ASIF Plates 2.7mm straight, 1/4 tubular & DCP Plate 2-50 hole / 23 - 300mm lengthMA055 AO/ASIF Plates Steel, DHS plates 130-150 deg/ 2-16 hole / 43-27mm length
/ barrel 25 - 38mm
PART A - Prostheses List by Category, Groups and Sponsor Page 393 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA056 AO/ASIF Plates 2.7mm condylar plate Left & RightMA057 AO/ASIF Plate Steel, 3.5mm narrow, DCP/LCDCP 2-10 hole / length 25mm - 155mmMA058 AO/ASIF Plates 3.5mm broad DCP/LCDCP 7-22 holeMA059 AO/ASIF Plates 4.5mm semi tubular 2 - 28 holeMA060 AO/ASIF Plates 4.5mm narrow, DCP/LCDCP 2-28 holeMA061 AO/ASIF Plates 4.5mm broad, DCP/LCDCP 2-28 holeMA062 AO/ASIF Plates Tubular plate, 3.5mm 1/3 tubular 2-28 holeMA063 AO/ASIF Plates Wrist fusion plate - standard bend, short 2-28 hole
bend, straight
MA064 AO/ASIF Plates DHS trochanteric stabilizing plate sterile 3-16 holeMA065 Spinal Plate/Plate System AO/ASIF Spinal Posterior cervical hook 1 & 2 hole / 21-39mm length
Implants
MA066 Spinal Plate/Plate System AO/ASIF Spinal Anterior cervical H plate 5-20 hole / 16 - 21mm holes & hole Implants
MA072 AO/ASIF Plates Osteotomy plate - adult 4 Hole /blade 40 - 110mm / 90-130 degMA075 AO/ASIF Plates - Steel 3.5mm - 1/3 tubular plate 2-12 hole / 25 - 145mm lengthMA076 AO/ASIF Plates - Steel 3.5mm T plate 3-5 hole shaft / 3-4 hole head (incl.
oblique) length 38mm - 78mm
MA077 AO/ASIF Plates 2.7mm straight, 1/4 tubular & DCP 2-12 hole / length 23-63mmMA078 AO/ASIF Plates 2.7mm, shaped plate 2-18 holeMA079 AO/ASIF Plates 2.7 condylar Left & RightMA087 AO/ASIF Plates Distal radius plate - volar plates - left & 2.4mmMA088 AO/ASIF Plates DHS/DCS plate 125-160deg 2-28 holeMA094 AO/ASIF K-Wires, Pins, Washers etc Wire mount One size onlyMA095 AO/ASIF Plates 1.2mm, straight, external, T, Y, button, 3-4 holeMA096 AO/ASIF Plates 2.4mm unilock, angled, straight, T, Y, 4-20 hole
condylar, DCP, LCDCP, left & right,
MA112 AO/ASIF Screws LISS screws - locking head & screw 5.0 x 81mm - 5.0 x 85mmhole insert
MA113 AO/ASIF Screws LISS fixator - Lat. proximal tibia / distal 5-13 holesfemur / right & left
PART A - Prostheses List by Category, Groups and Sponsor Page 394 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA168 AO/ASIF Plates Specially manufactured plate all sizes Custom madeMA169 AO/ASIF Plates Shaped 2.0mm MA170 AO/ASIF Plates Shaped 2.7mmMA171 AO/ASIF Plates Straight reconstruction 2.7mm 5 holeMA172 AO/ASIF Plates Reconstruction plate, straight & curved 2.7-3.5mm / 5 hole - 24 holeMA173 AO/ASIF Plates - Steel 4.5mm semi tubular 2-12 holeMA174 AO/ASIF Plates - Steel 4.5mm narrow DCP/LCDCP 2-24 hole length 34-286mmMA175 AO/ASIF Plates - Steel 4.5mm broad DCP/LCDCP 6-26 hole/ length 106 - 359mmMA176 AO/ASIF Plates - Steel 4.5mm reconstruction 3 - 16 holeMA177 AO/ASIF Plates 4.5mm lengthening broad 2-28 holeMA178 AO/ASIF Plates 4.5mm Hook Plate 3-12 holeMA179 AO/ASIF Plates Osteotomy Plate - Adult / LC angle blade 4 hole, 5-6 hole/30-40mm blade length/
/ cannulated angle blade 90 - 100 deg, 10- 20 mm displacement
MA180 AO/ASIF Plates Osteotomy plate - adolescent 90 deg, blade 40 - 60mm, displ 10 - MA181 AO/ASIF Plates Osteotomy plate - infant Child, toddler & infant, 115 deg
bifurcated, blade 25 - 45mm, 80 - 100 deg, 4 - 8mm offset, displ 7 - 12mm,
MA182 AO/ASIF Plates Osteotomy plate - high tibial 95 deg condylarprox tibia , 50-60 mm, displ 15-20mm
MA183 AO/ASIF Plates - Steel Condylar & small condylar, angled plate 5 - 24 hole, blade length 50 - 90mm, 95 degree
MA184 AO/ASIF Plates - Steel Angled plate 4 - 12 hole, length 50 - 110mm 130 MA185 AO/ASIF Plates - Steel DCS plate 95 deg, 10 hole - 22 hole, length 100 -
370mm, barrel 25mm.
MA189 AO/ASIF Plates Specially manufactured plate 1.0mm - 6.5mmMA190 AO/ASIF Plates 1.5mm plate 2-28 holeMA191 AO/ASIF Plates 2.0mm DCP LCDCP 4 - 20 holeMA192 AO/ASIF Plates 2.0mm shaped 2 - 18 holeMA193 AO/ASIF Plates 2.0mm condylar Left & rightMA194 AO/ASIF Plates 3.5mm narrow, DCP/LCDCP 2-22 hole
PART A - Prostheses List by Category, Groups and Sponsor Page 395 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA195 AO/ASIF Plates 3.5mm, T- PLATE - right & oblique 2-8 holeMA196 AO/ASIF Plates 4.5mm recon plate 2-28 holeMA197 AO/ASIF Plates 4.5mm,T-plate - left & right 3 hole - 9 holeMA198 AO/ASIF Plates 4.5mm, head buttress plate lateral tibial 5 - 13 hole
left & right
MA199 AO/ASIF Plates 4.5mm condylar buttress plate left & 7 - 15 holeMA200 AO/ASIF Plates 4.5mm, spoon plate 5 - 6 holeMA201 AO/ASIF Plates 4.5mm condylar, angled plate 4-22 holeMA202 AO/ASIF Plates 4.5mm, angled plate 4-22 holeMA256 AO/ASIF Plates - Steel Osteotomy plate - shoulder Dislocation 80-90 deg. blade length 35 -
40mm
MA279 LCP Plate 1/3 Tubular Plate Dia 3.5mm, length 2-16 holeMA280 LCP Plate Distal Tibial Plate, sterile/non sterile Dia 3.5 - 5.0mm, length 4-16 holeMA281 LCP Plate Proximal Tibial Head Plate, Sterile/Non Dia 3.5 - 5.0mm, length 4-18 hole
Sterile
MA282 LCP Plate Distal Femoral Buttress Plate, Sterile/Non Dia 5.0mm, length 4-22 holeSterile
MA283 LCP Plate Tomofix Plate, Sterile/Non Sterile Dia 5.0mm, length 2-8 holeMA284 LCP Plate Locking Proximal Humeral Plate, Dia 3.5mm, length 4-10 hole
Sterile/Non Sterile
MA285 LCP Plates Cloverleaf Plate, Dia 3.5mm, length 3-6 holeMA286 LCP Plates Oblique left & right and right angled Dia 3.5mm, length 3 - 6 hole
plates, Sterile/Non Sterile
MA287 LCP Plate L & T Plates, L & T Buttress Plates, Dia 3.5 - 5.0mm, length 2-10 holeSterile/Non Sterile
MA288 LCP Plate Reconstruction Plate, Sterile/Non Sterile Dia 3.5 - 5.0mm, length 3-22 holeMA289 LCP Spacer and LCP Washer Dia 2.7 - 5.0mmMA290 LCP Plate Straight Plate, Sterile/Non Sterile Dia 3.5 - 5.0mm, length 2-20 holeMA310 AO/ASIF Plates Calcaneal, Locking 3.5mm, 30-100mmMA314 AO/ASIF Plates Proximal Tibial Plate 3.3mm-5.0mm dia 2.0-28mmMA317 AO/ASIF Plates Medial Distal Tibial Plate 3.5 and 4.5mm, 6 - 12 hole
PART A - Prostheses List by Category, Groups and Sponsor Page 396 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA318 AO/ASIF Plates Medial Distal Tibial Plate 3.5 and 4.5mm, 13 - 18 holeMA387 AO/ASIF Plates Foot plates - steel - multiple hole 2 - 4mmMA393 Small & Mini Fragment Plates Locking Distal Radius Plate System LCP - Volar Plate 2.4mm Left & RightMA394 Small & Mini Fragment Plates Locking Distal Radius Plate System LCP - Volar Buttress Plate 2.4mm Left &
Right
MA444 Small & Mini Fragment Plates Locking Distal Radius Plate System LCP Dorsal T, L, Straight Plates 2.4mm Long/Short
MA445 Small & Mini Fragment Plates Locking Distal Radius Plate System LCP-ORP Dorsal 2.4mm Plate Left &
Medical & Optical Instruments Australia Pty LtdMO138 Martin Bone Plate Compression Plate Y Plate Titanium 1.0mmMO139 Martin Bone Plate Compression Plate T Plate Titanium 1.0mmMO140 Martin Bone Plate Compression Plate Y, L Plate Titanium 1.0mmMO141 Martin Bone Plate Compression Plate Straight Titanium 1.0mmMO142 Martin Bone Plate Compression Plate T,L, Straight Titanium 1.2mmMO202 Acumed Bone Plate MCP Fusion Plate - Titanium 4 Hole left and rightMO208 Acumed Bone Plate Wrist Fusion Plate - Titanium Standard, Mini
MedtexMX002 Judet Plate Implantable stainless plates for fixation 4 prong x 12 through to 24mm in 2mm
and stabilisation of rib fractures increments: 6 prong x 12 through to 24mm in 2mm increments
Medtronic Sofamor Danek Australia Pty LtdSD094 Zephir Anterior Cervical Plate 20-70mm
Orthotech Pty LtdOH052 Interpore Bone Plate System TPS Bone Plate 20 - 56cmOH053 Interpore Bone Plate System TPS Screw 14 - 22mmOH054 Interpore Bone Plate System TPS Locked Nut 3mm
Smith & Nephew Surgical Pty LtdSN001 TC 100 Quarter Tubular plates (2.7mm Sterile 23 - 63mm
cortex screws)
SN006 TC 100 1.5mm Mini Plates Stainless steel, Sterile Straight 3-6 holes, T-Plates 3-4 holes
PART A - Prostheses List by Category, Groups and Sponsor Page 397 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN011 TC 100 3.5mm Small Fragment Sterile, 14 - 26 hole 169 - 265mm(Compression) plates
SN012 TC 100 3.5mm One Third Tubular plates Sterile, 2 - 8 holes 25 - 97mmSN013 TC 100 3.5mm Curved Reconstruction Sterile, 6 - 8 holes 70 - 94mmSN026 135 degree Angled Blade Plates - Shaft length 60 - 200mmSN044 TC 100 3.5mm Small Fragment Sterile, 2 - 7 holes 25mm - 85mm
(Compression) Plates
SN046 TC 100 2.0mm Condylar plates Sterile, Left and right 7 holesSN062 TC 100 4.5mm Narrow Compression Sterile, 5 - 7 holes 87 - 119mmSN063 TC 100 2.7mm Small Fragment 2 - 12 holes 20 - 100mm
(Compression) plates
SN065 TC 100 4.5mm T-Buttress plates Sterile, 4 - 6 holes 80 - 112mmSN068 TC 100 1.5mm Condylar plates Sterile, Left and right One size onlySN069 TC 100 3.5mm Reconstruction plates Sterile, Straight 9 - 11 holes 106 - 130mmSN071 TC 100 4.5mm Narrow Compression Sterile, 2 - 4 holes 39 - 71mmSN073 TC 100 2.0mm T-plates Sterile, 2 hole shaft One size onlySN074 TC 100 Bone Plates with provisional 3.5mm Small Compression Plate 7 - 8 hole
fixation holes
SN075 TC 100 4.5mm Reconstruction plates Sterile, 10 - 13 holes 157 - 205mmSN076 TC 100 3.5mm Curved Reconstruction Sterile, 14 - 18 holes 166 - 214mmSN077 TC 100 3.5mm Curved Reconstruction Sterile, 10 - 12 holes 118 - 142mmSN078 TC 100 4.5mm Broad Compression plates Sterile, 20 - 26 holes 326 - 423mmSN080 TC 100 4.5mm T-plate Sterile, 5 - 8 holes 100 - 148mmSN081 TC 100 2.0mm H-plates Sterile One size onlySN083 TC 100 2.0mm T-plates Sterile, 9 hole shaft 3 - 4 holesSN087 TC 100 Semi Tubular plates 8 - 12 holes 135 - 199mmSN088 TC 100 Semi Tubular plates Sterile, 5 - 7 holes 87 - 119mmSN089 TC 100 2.7mm Condylar plates Sterile Right/leftSN090 TC 100 2.0mm L-plates Sterile, Right/left, Oblique right/left One size each
PART A - Prostheses List by Category, Groups and Sponsor Page 398 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN091 TC 100 Bone Plates with provisional Lateral Tibial Head Buttress 7 - 9 hole 149 - 181mmfixation holes
SN092 TC 100 Bone Plates with provisional 4.5mm Narrow Compression 11 - 12 holefixation holes
SN093 TC 100 Bone Plates with provisional 4.5mm Narrow Compression 8 - 10 holefixation holes
SN094 TC 100 Bone Plates with provisional 4.5mm Narrow Compression 5 - 7 holefixation holes
SN095 TC 100 Bone Plates with provisional Semi-Tubular 6 - 7 holes 103 - 119mmfixation holes
SN096 TC 100 Bone Plates with provisional Semi-Tubular 4 - 5 holes 71 - 87mmfixation holes
SN097 TC 100 Bone Plates with provisional 4.5mm Broad Compression 12 - 14 holefixation holes
SN098 TC 100 4.5mm Reconstruction plates Sterile, 14 - 16 holes 221 - 253mmSN099 TC 100 Bone Plates with provisional 4.5mm Broad Compression 6 - 8 hole
fixation holes
SN101 TC 100 Bone Plates with provisional L-Buttress, Left and right angled One size eachfixation holes
SN102 TC 100 Bone Plates with provisional T-Plate Oblique 50 - 73mmfixation holes
SN103 TC 100 Bone Plates with provisional T-Plate Right angled 50 - 67mmfixation holes
SN104 TC 100 Bone Plates with provisional 1/3 Tubular with Collar 7 - 10 holefixation holes
SN105 TC 100 Bone Plates with provisional 1/3 Tubular with Collar 3 - 6 holefixation holes
SN106 TC 100 Bone Plates with provisional 3.5mm Small Compression Plate 9 - 10 holefixation holes
SN107 TC 100 4.5mm Condylar Buttress plates Sterile, right, 11 - 15 hole 221 - 285mmSN108 TC 100 Bone Plates with provisional 4.5mm Broad Compression 9 - 10 hole
fixation holes
SN109 TC 100 3.5mm Reconstruction plates Sterile, Straight 4 - 8 holes 46 - 94mmSN116 TC 100 2.7mm T-plates Sterile One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 399 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN117 TC 100 Semi Tubular plates Sterile, 2 - 4 holes 39 - 71mmSN118 TC 100 3.5mm Small Fragment Sterile, 8 - 12 hole 97 - 145mm
(Compression) plates
SN119 TC 100 4.5mm T-plate Sterile, 3 - 4 holes 68 - 84mmSN121 TC 100 Bone Plates with provisional 3.5mm Small Compression Plate 5 - 6 hole
fixation holes
SN125 TC 100 Bone Plates with provisional T-Plate 4 - 8 holes 84 - 148mmfixation holes
SN126 TC 100 4.5mm Condylar Buttress plates Sterile, Left and right, 7 - 9 hole 158 - 190mmSN129 TC 100 1.5mm Mini Plates Stainless steel, Sterile H-Plates 4 holesSN130 TC 100 3.5mm One Third Tubular plates Sterile, 9 - 12 holes 109 - 145mmSN131 TC 100 4.5mm Narrow Compression Sterile, 14 - 24 holes 231 - 390mmSN132 TC 100 4.5mm Narrow Compression Sterile, 11 - 13 holes 183 - 215mmSN133 TC 100 4.5mm Narrow Compression Sterile, 8 - 10 holes 135 - 167mmSN134 TC 100 3.5mm Reconstruction plates Sterile, Straight 16 - 22 holes 190 - 263mmSN135 TC 100 95 Degree Condylar Plates Small stature Shaft length 92 - 299 mm, blade length
50 - 80mm
SN136 TC 100 Small T-Plates Sterile, right angled and oblique 3 - 4 holes in head, 3 - 6 holes in shaftSN137 TC 100 4.5mm Broad Compression plates Sterile, 6 - 8 holes 103 - 135mmSN142 TC 100 4.5mm Broad Compression plates Sterile, 9 - 12 holes 151 - 199mmSN143 TC 100 4.5mm Reconstruction plates 3 - 9 holes 45 - 141mmSN144 TC 100 2.7mm L-plates Sterile, Right/left, Oblique right/left 3 holesSN145 TC 100 3.5mm Reconstruction plates Sterile, Straight 12 - 15 holes 142 - 178mmSN468 Compression Hip Screw System Ambi Standard Barrel Plates 60mm -80mm, 2-3 slotSN469 Compression Hip Screw System Ambi Standard Barrel Plates 100mm -220mm, 4-10 slotSN470 Compression Hip Screw System Ambi Standard Barrel Plates 260mm+, 12-14 slotSN471 Compression Hip Screw System Ambi Short Barrel Plates 100mm, 4-5 slotSN472 Compression Hip Screw System Ambi Short Barrel Plates 120mm, 4-5 slotSN473 Compression Hip Screw System Classic Standard Barrel Plates 60-140mm, 2-3 slotSN474 Compression Hip Screw System Classic Standard Barrel Plates 180-220mm, 4-10 slot
PART A - Prostheses List by Category, Groups and Sponsor Page 400 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN475 Compression Hip Screw System Classic Standard Barrel Plates 260mm+, 12-14 slotSN476 Compression Hip Screw System Classic Short Barrel Plates 100mm, 4-5 slotSN477 Compression Hip Screw System Classic Short Barrel Plates 120mm, 4-5 slotSN478 Compression Hip Screw System Classic Supracondylar Plate 90-95 6-12SLSN484 Compression Hip Screw System Supracondylar plate 6 SlotSN485 Compression Hip Screw System Supracondylar plate 8 SlotSN486 Compression Hip Screw System Supracondylar plate 10 SlotSN487 Compression Hip Screw System Supracondylar plate 12 SlotSN490 Intermediate Osteotomy System Plate (hip screw) 90-150DegSN493 Paediatric Osteotomy System Plate (hip screw) With Prox slot 90D - 140DSN532 TC 100 Plate 2.0mm Straight Plate 3-20 holeSN542 TC 100 Plate Multifragment Plates One size onlySN543 TC 100 Plate Pelvic Fragment Plates 3-18 hole, 45-190mmSN557 TC 100 Plate 4.5mm Broad Compression Plate 14-18 holeSN569 TC 100 Plate Calcaneal Plate Sterile 60mm,70mm & 9 holeSN570 TC 100 Plate Cloverleaf Plate 3-4 holeSN571 TC 100 Plate Cloverleaf Plate 5-6 holeSN572 TC 100 Plate Cloverleaf Plate 7-8 holeSN573 TC 100 Plate Cloverleaf Plate 9 holeSN574 TC 100 Plate Cobra Head Plate 8-11 holeSN577 TC 100 Plate Hook Plate 123mm 4 holeSN578 TC 100 Plate Large L-Buttress Plate Left & right AngledSN581 TC 100 Plate Lateral Tib Head Buttress Plate 3-7 hole Left & RightSN582 TC 100 Plate Lateral Tib Head Buttress Plate 9-13 hole Left & RightSN592 TC 100 Plate Spoon Plate 5 hole & 6 holeSN659 HTO Plates Titanium 6 - 20mmSN670 Femoral Osteotomy Plate Titanium Wedge 6 - 20mm thick x 20mm wideSN671 Femoral Osteotomy Plate Titanium Femoral Plate 6-8 hole, 6 - 18mm wide
PART A - Prostheses List by Category, Groups and Sponsor Page 401 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN685 Opening Wedge Tibial Ostectomy Plate Titanium 6 - 20mmSN745 Peri-Loc Plates, stainless steel, locking and non- 4.5mm
locking, lefts and rights
SN771 Peri-Loc Plates, stainless steel, locking and non- 3.5mmlocking, lefts and rights
Stryker Australia Pty LtdSK031 Leibinger Titanium Implant system Profyle hand and small fragment plate 1.2mm sys XS, T-shape 8 holesSK032 Leibinger Titanium Implant system Profyle hand and small fragment plate 1.7mm sys S, T-shape 10 holesSK033 Leibinger Titanium Implant system Profyle hand and small fragment plate 1.7mm system S, Condylar 5 holes L&RSK034 Leibinger Titanium Implant system Profyle hand and small fragment plate 1.7mm system S+, 16 holesSK035 Leibinger Titanium Implant system Profyle hand and small fragment plate 1.7mm system S+, 90deg L&RSK036 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system M, compression condylar
6 holes L&R
SK037 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system M, fixation 3D 6x2 holesSK038 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system L, compr 10 hole T barSK039 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system M, compr 8 holes straightSK040 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system L, straight 7 & 8 holes barSK041 Leibinger Titanium Implant system Profyle hand and small fragment plate 2.3mm system M, compr 10 hole TSK049 Stryker Plating System Screws Cancellous bone screws, full and partial Dia 4.0mm, 10-20mmSK050 Stryker Plating System Screws Cancellous bone screws, full and partial Dia 4.0mm, 22-30mmSK051 Stryker Plating System Screws Cancellous bone screws, full and partial Dia 4.0mm, 32-50mmSK052 Stryker Plating System Screws Cancellous bone screws, full and partial Dia 4.0mm, 55-100mmSK055 Matta Pelvic System Straight acetabular plate 10-14 HolesSK057 Matta Pelvic System Straight acetabular plate 15-20 HolesSK064 Matta Pelvic System Straight acetabular plate 4-9 HolesSK066 Matta Pelvic System Symphysis Publis Plates Radius 75 4-6 HolesSK067 Matta Pelvic System Curved Pelvic Plate Radius 108 4-9 HolesSK069 Matta Pelvic System Curved Pelvic Plate Radius 108 10-14 HolesSK070 Matta Pelvic System Curved Pelvic Plate Radius 108 15-20 Holes
PART A - Prostheses List by Category, Groups and Sponsor Page 402 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK071 Matta Pelvic System Curved Pelvic Plate Radius 88 4-9 HolesSK073 Matta Pelvic System Curved Pelvic Plate Radius 88 10-14 HolesSK074 Matta Pelvic System Curved Pelvic Plate Radius 88 15-20 HolesSK075 Stryker Plating System Basic Fragment 4.5mm Reconstruction Plate 3-9 HolesSK077 Stryker Plating System Basic Fragment 4.5mm Reconstruction Plate 10-16 HolesSK081 Stryker Plating System Small Fragment Waisted compression plate 2-10 HolesSK082 Stryker Plating System Small Fragment Waisted compression plate 11-20 HolesSK083 Stryker Plating System Small Fragment Standard compression plate 2-9 HolesSK084 Stryker Plating System Small Fragment Standard compression plate 10-20 HolesSK086 Stryker Plating System Screws Cortical bone screws 4.5mm diameter 22-38mmSK088 Stryker Plating System Basic Fragment Waisted Compression Plate Broad 15-26 HolesSK094 Stryker Plating System Small Fragment Calcaneal Plate 70-80mmSK095 Stryker Plating System Screws Cortical bone screws 4.5mm diameter 40-64mmSK096 Stryker Plating System Screws Cortical bone screws 4.5mm diameter 65-95mmSK097 Stryker Plating System Screws Cortical bone screws 4.5mm diameter 100-150mmSK098 Stryker Plating System Small Fragment Stainless steel, reconstruction plate 10-22 HolesSK099 Stryker Plating System Small Fragment One Third Tubular Plate with Collar 9-14 HolesSK100 Stryker Plating System Small Fragment T Plates, standard 40-57mm LengthSK101 Stryker Plating System Small Fragment T Plates, standard 66-100mm LengthSK102 Stryker Plating System Small Fragment Cloverleaf Plate 6-10 HolesSK103 Stryker Plating System Screws Cortical bone screws Dia 2.7mm, screw length 22-38mmSK104 Stryker Plating System Screws Cortical bone screws Dia 2.7mm, screw length 40-60mmSK105 Stryker Plating System Screws Cortical bone screws Dia 3.5mm, screw length 10-20mmSK106 Stryker Plating System Screws Cortical bone screws Dia 3.5mm, screw length 22-38mmSK107 Stryker Plating System Screws Cortical bone screws Dia 3.5mm, screw length 40-60mmSK108 Stryker Plating System Screws Cortical bone screws Dia 3.5mm, screw length 65-95mmSK109 Stryker Plating System Screws Cortical bone screws Dia 3.5mm, screw length 100-120mmSK110 Stryker Plating System Basic Fragment Waisted compression plate narrow 2-9 Holes
PART A - Prostheses List by Category, Groups and Sponsor Page 403 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK111 Stryker Plating System Basic Fragment Waisted compression plate narrow 10-22 HolesSK335 Matrix SmartLock Polyaxial Locking Titanium locking plates for reconstruction Matrix SmartLock Palmar Radius
System - Plates of intra-articular and extra-articular Locking Plate, Medium, Short; Matrix fractures of the distal radius and SmartLock Palmar Radius Locking Plate, reconstruction of the distal radius Medium, Long; Matrix SmartLock Palmar
Radius Locking Plate, Large, Short; Matrix SmartLock Palmar Radius Locking Plate, Large, Long; Matrix SmartLock Dorsal Radius Locking Plate, Left, Medium; Matrix SmartLock Dorsal Radius Locking Plate, Left, Large; Matrix SmartLock Dorsal Radius Locking Plate, Right, Medium; Matrix SmartLock Dorsal Radius Locking Plate, Right, Large
SK336 Matrix SmartLock Polyaxial Locking Titanium Cross Pin Screws for Matrix SmartLock Locking Screws, System - Screws reconstruction of intra-articular and diameter 2.7mm, lengths 10-28mm;
extra-articular fractures of the distal Matrix SmartLock Bone Screws, radius and reconstruction of the distal diameter 2.7mm, lengths 8-38mm; Matrix
SmartLock Cancellous Bone Screws,
SK372 Matrix - SMARTLock Polyaxial Locking Radius Locking Plates Dorsal: Medium and Large, left and Right;System for Distal Radius Palmer: Medium and Large, Long and
SK391 Leibinger Universal Distal radius System Universal Distal Radius SMARTLock Radial Column - Long and Short; Ulna Column Locking Plates Column - Long and Short, Left and Right
ST003 Stryker Plating System Screws - Cortical Stainless Steel/Titanium Diameter 2.7mm, screw length 8-20mm2.7 & 3.5
ST008 Stryker Plating System Small & Basic Narrow or Broad 2-20 holes, 26-260mm plate lengthFragment - Compression Plate
ST017 Stryker Plating System Small & Basic Stainless Steel or Titanium 50-60mmFragment - Calcaneal Plate
ST025 Stryker Plating System Small Fragment Stainless Steel 4-9 HolesST036 Stryker Plating System Small & Basic Oblique T Plate or T Plate, Stainless Steel 42-86mm Length
Fragment - T Plate or Titanium, Oblique
ST037 Stryker Plating System SmallFragment Set One Third Tubular Plate with Collar 2-8 HolesST038 Stryker Plating System - Reduction Pin 4.5mm Diameter, Stainless Steel One size onlyST039 Stryker Plating System Small & Basic Stainless Steel or Titanium, Left or Right 3-20 Holes, 67-339mm Plate Length
Fragment - L Plate
ST040 Stryker Plating System - Washers & Nuts Stainless Steel or Titanium Nuts 5.0 or 4.5mm thickness; Washers 7 - 13mm diameter
PART A - Prostheses List by Category, Groups and Sponsor Page 404 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST041 Stryker Plating System Basic Fragment Waisted Compression Plate Broad 6-14 holesST051 Stryker Plating System Small Fragment Cloverleaf Plate 3-5 HolesST060 Matta - Pelvic Curved Straight Synphis Stainless Steel 2-9 hole plate
Pubic Plate
ST671 Leibinger Plates Leibinger scaphoid platinum, titanium One size - left, right, neutral orientationST715 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 4 hole
system, fixation straight plate, titanium
ST716 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 16 holesystem, fixation straight plate, titanium
ST717 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 5 holessystem, fixation plate,T-shape, 90 deg, narrow, titanium
ST718 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 5 holessystem, fixation plate, T-shape, oblique, right/left, titanium
ST719 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 5 holessystem, fixation plate, Y-shape, narrow, titanium
ST720 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 2x2 holessystem, fixation plate, 3D plate, titanium
ST721 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 3x2 holes, 2x2 + 2 holessystem, fixation plate, 3D plate, titanium
ST722 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 4x2 holessystem, fixation plate, 3D plate, titanium
ST723 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm system, 4x2 holessystem, fixation plate, replant plate, titanium
ST724 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.2mm diameter x 4-13mmsystem, cross-slot screw, self-tapping,
ST725 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.4x3mm, 1.4x5mm, 1.4x7mm, system, emergency screw, cross-slot,
ST726 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 4 holessystem, straight plate, titanium
ST727 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 4 holessystem, fixation straight plate with bar, titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 405 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST728 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 16 holessystem, fixation straight plate, titanium
ST729 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 6 holessystem, fixation plate, L-shape, 90 deg, right/left, titanium
ST730 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 6 holessystem, fixation plate, L-shape, oblique, right/left, titanium
ST731 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 6 holessystem, fixation plate, T-shape, 90 deg, narrow, titanium
ST732 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7 mm system, 6 holessystem, T-shape, narrow, oblique, right/left, titanium
ST733 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 7 holessystem, fixation plate, T-shape, 90 deg, titanium
ST734 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 7 holessystem, Y-shape, narrow, titanium
ST735 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 9 holessystem, Z-shape, titanium
ST736 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 4x2 holessystem, replant plate, titanium
ST737 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 5 holessystem, condylar compression plate with bar, right/left, titanium
ST738 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 2x2 holessystem, fixation, 3D plate, titanium
ST739 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 2x2 + 2 holessystem, fixation, 3D plate, titanium
ST740 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 3x2 holessystem, 3D plate, titanium
ST741 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm system, 4x2 holessystem, 3D plate, titanium
ST742 Leibinger Titanium Implant System Leibinger profyle hand & small fragment 1.7mm diameter x 5-17mmsystem, cross-slot, self-tapping screws, titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 406 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST743 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 1.7mm diameter x 18-24mm System, cross-slot, self-tapping screws, titanium
ST744 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 1.6mm diameter System, cross-slot, self-tapping screws , Titanium
ST745 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 1.9x5mm System, emergency, cross-slot, self-tapping screw, Titanium
ST746 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 4 holes System, fixation straight plate and compression plate, Titanium
ST747 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 4 holes System, straight plate and compression plate, with bar, Titanium
ST748 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 5 holes System, straight compression plate,
ST749 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, straight compression plate,
ST750 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 16 holes System, fixation straight plate, Titanium
ST751 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, fixation and compression plate, L-shape, 90 deg, right/left, Titanium
ST752 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, fixation and compression plate, L-shape, oblique, right/left, Titanium
ST753 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, fixation and compression plate, T-shape, narrow, 90 deg, Titanium
ST754 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, fixation and compression plate, T-shape, narrow, oblique, right/left,
ST755 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 7 holes System, fixation and compression plate, T-shape, 90 deg, Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 407 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST756 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 7 holes System, fixation and compression plate, Y-shape, narrow, Titanium
ST757 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 13 holes System, fixation plate, Z-shape, Titanium
ST758 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 5 holes System, condylar compression plate, right/left, Titanium
ST759 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, condylar compression plate, right/left, Titanium
ST760 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 4x2 holes System, replant plate, Titanium
ST761 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 2x2 holes System, fixation plate, 3D plate, Titanium
ST762 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 2x2 +2 holes System, 3D plate, Titanium
ST763 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 3x2 holes System, fixation plate, 3D plate, Titanium
ST764 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 4x2 holes System, fixation plate, 3D plate, Titanium
ST765 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm diameter x 6-18mm System, cross-slot, self-tapping screw, Titanium
ST766 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm diameter x 19-24mm System, cross-slot, self-tapping screw, Titanium
ST767 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.5mm diameter x 6mm System, emergency cross-slot screw,
ST768 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 4 holes System, compression plate with bar,
ST769 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 5 holes System, compression plate with bar,
ST770 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, compression plate with bar,
ST771 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 7 holes System, compression plate with bar,
PART A - Prostheses List by Category, Groups and Sponsor Page 408 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST772 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 8 holes System, compression plate with bar,
ST773 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, compression plate, 90 deg, L-shape, right/lef, Titanium
ST774 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, compression plate, T-shape, 90 deg, Titanium
ST775 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3mm system, 6 holes System, compression plate, T-shape, oblique, right/left, Titanium
ST776 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.3x5mm, 2.3x6mm, 2.3x8mm, System, screw and emergency screw, 2.3x9mm, 2.3x10mm, 2.3x12mm,
2.3x13mm, 2.3x14mm, 2.3x15mm
ST777 Leibinger Titanium Implant System Leibinger Profyle Hand & Small Fragment 2.5mm diameter System, screw, Titanium
ST778 Leibinger Titanium Implant System Rogachefsky Distal Radius Plates, Palmar Fracture Plate - MediumST779 Leibinger Titanium Implant System Rogachefsky Distal Radius Plates, Titanium Palmar Fracture Plate - LargeST780 Leibinger Titanium Implant System Rogachefsky Distal Radius Plates, Dorsal Fracture Plate Medium Left and ST781 Leibinger Titanium Implant System Rogachefsky Distal Radius Plates, Dorsal Fracture Plate Large Left and RightST782 Leibinger Titanium Implant System Rogachefsky Distal Radius Screws, 2.7mm diameter - 12mm-38mm in 2 mm
increments,
ST783 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 2.3x8mm, 2.3x10mm, 2.3x12mm, System, screw, Titanium
ST784 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 2.7x12mm, 2.7x14mm, 2.7x16mm, System, screw, Titanium 2.7x18mm, 2.7x20mm,2.7x22mm
ST785 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 3.0x14mm, 3.0x16mm, 3.0x18mm System, emergency screw, Titanium
ST786 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 4 holesSystem, straight plate, Titanium
ST787 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 6 holesSystem, straight plate, Titanium
ST788 Leibinger Titanium Implant System Leibinger Forefoot Reconstruction 4 holesSystem, curved plate, Titanium
ST789 Leibinger Titanium Implant System Leibinger Plates - Wrist Arthrodesis 8 and 12 holesPlates, partial and total, right/left, Titanium
PART A - Prostheses List by Category, Groups and Sponsor Page 409 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST790 Alpha Stryker cervical plates Reflex anterior cervical plate, 12 - 84mm (2mm increments)Molybdenum, zirconium and iron
ST791 Alpha Stryker cervical plates Reflex anterior cervical plate, 4mm x 10mm - 18mm (2mm increments)Molybdenum, zirconium and iron, bone 4.5mm x 12 - 16mm (2mm increments)
ST983 Stryker Plating System DuPont Distal Humeral Plate 7,9,11,13 holesST984 Stryker Plating System Epi-Union Peri- Articular Plating System 2-4 holes
Distal Radius (Universal)
ST985 Stryker Plating System Epi-Union Peri- Articular Plating System 5-7 holesDistal Radius (Universal)
ST986 Matta Pelvic System Straight Pelvic Plate 10-14 HolesST987 Matta Pelvic System Straight Pelvic Plate 15-20 Holes
Surgical HouseSU169 Hallu-Fix Plates Composition - titanium, Hallu-C Plate: left Hallu-C Plate left and right 40,45,50mm;
and right, Hallu-S Plate: left and right Hallu-S Plate right 50,55mm, left 60mm
Taylor Bryant Pty LtdTB176 Integra Fixation Plate + 3 Wires Used for supplementary internal fixation One size only
device
ZimmerZI209 ZPS Nut Small & LargeZI210 ZPS Washer/Spiked washer Small & LargeZI211 ZPS 1/3 Tube Plate 3 - 8 HoleZI212 ZPS Small Narrow Plate 3 - 8 HoleZI213 ZPS Small Broad Plate 3 - 12 HoleZI214 ZPS Mini Plates 3 - 8 HoleZI215 ZPS Small SCP plate 3 - 12 HoleZI216 ZPS SCP Forearm plate 4 - 12 HoleZI217 ZPS Buttress Plate 4 - 6 HoleZI218 ZPS Spoon Plates 5 - 6 HoleZI219 ZPS T Plate 68 - 147mmZI220 ZPS Cloverleaf plates 88 - 104mmZI221 ZPS Small straight plate 3 - 8 Hole
PART A - Prostheses List by Category, Groups and Sponsor Page 410 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZI222 ZPS Epiphysis plate 2 - 6 HoleZI223 ZPS 1/4 Tubular Plate 3 - 8 HoleZI224 ZPS Narrow Plate 2 - 12 HoleZI225 ZPS Broad Plate 5 - 14 HoleZI227 ZPS 3.5mm Straight Recon Plates 6 HoleZI228 ZPS 3.5mm Curved Recon Plates 6 HoleZI230 ZPS 4.5mm Straight Recon Plate 6 HoleZI231 ZPS Recon Bridge Plate 4 Hole
Plugs
Biomet Australia Pty LtdBI780 Optiplug Cement Restrictor Restrictor, PEGT/PBT 10-20mm Diameter
De Puy AustraliaDY077 Apex Hole eliminator Hole eliminator screw Titanium One size only
Howmedica IncorporatedHW005 Artisan Bone Plug Artisan Cement Restrictor - Polyethylene Small, Medium, LargeHW009 HNR System Head Neck Replacement System - Non- Medium, Large, X-Large, XX-Large
Porous Stem - Cobalt Chrome Body Size 33, 43, 53mm
Link Orthopaedic AustraliaLO106 Intramedullary Plug P/E Intramedullary Plug 12 to 20 mm
Taylor Bryant Pty LtdTB018 Air Plug Biodegradable Cement Plug - Sizes 8 -18
ZimmerZI356 Medullary Plug, MS 30 Centring Plug, cement restrictor, hip - PE 1 to 7ZI451 Allofit screw hole plugs Sterile, 7 per set One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 411 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prep Kits
De Puy AustraliaDP446 Vacu Mix Plus CMW Cement Vacu-Mix Plus Pre Loaded With CMW 50, 80 grams
Bone Cement without Antibiotic
Procedure Trays, Surgical
Advanced Surgical TechnologiesAD196 Tenofix Tendon Repair System 2 Anchors, sutures, 2 pre-applied stop One size only
bead installation devices,
AD197 Tenofix Tendon Repair System Pre-applied stop bead and 2/0 suture One size onlyAD198 Tenofix Tendon Repair System Pre-applied stop bead crimper One size onlyAD199 Tenofix Tendon Repair System Installation device with anchor One size onlyAD204 Tenofix Tendon Repair System Repair system and removal device One size only
Orthotech Pty LtdOH139 Cement One size only
William A Cook Aust Pty LtdWC135 Vertebroplasty Procedure Pack Bone cement, biopsy needle and 40g bone cement; needle guage 11 - 13,
preparation kit length 10 - 15cm
Prostheses, Arm
Smith & Nephew Surgical Pty LtdSN138 Neer 3 Total Shoulder System Humeral stems Head size 15 - 16, stem diam 8 - 12mmSN677 Neer 3 Humeral CrCo Stem size 8 - 12mm, head size 15 -
26mm, Stem length 125mm
PART A - Prostheses List by Category, Groups and Sponsor Page 412 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Bone, Freeze-Dried
Advanced Surgical TechnologiesAD068 Surgibone Bovine Granulated Bone 4/12 mesh, 12/20 meshAD070 Surgibone Bovine Onlays & Pins 50mm, 80mm, 100mm, 120mm, 33mm x
11mm x 5.5mm
AD071 Surgibone Bovine Cubes 3 gramAD072 Surgibone Bovine Cubes 10 gramAD075 Surgibone Bovine Threaded Dowels 12mm, 13mm, 15mmAD076 Surgibone Bovine Cavity Blocks & Granulated Bone 20mm x 20mm x 10mm, 20/30 MeshAD078 Surgibone Bovine Lumbar Blocks 30x15x14mm, 16mm, 18mm, 20mm, AD081 Surgibone Bovine Tapered Disks, Cervical Blocks & 40x2x6mm, 8mm,10mm, 50x2x6mm,
Dowels, Lumbar Blocks 8mm, 10mm, 12mm, 14mm, 30x10x14mm, 16mm, 18mm, 20mm,
AD082 Surgibone Bovine Compound Wedge 55x25x10mm, 13mm, 15mm, AD083 Surgibone Bovine Plain Wedge & Tapered Wedge 55mm x 15mm x 25mm, 50mm x 6mm,
Prostheses, Carpal
Advanced Surgical TechnologiesAD106 Orthosphere Yttria-stabilized zirconia ceramic 8 - 12mmAD167 Wright Swanson Titanium Carpal Titanium 1 - 5 left and right
Scaphoid, Carpal Lunate, Basal Thumb
Prostheses, Cerclage, Bone
Global Scientific Pty LtdGS154 PLUS Endoprothetik Cerclage Systems CCG Band - Pure Titanium Length 27cmGS155 PLUS Endoprothetik Cerclage Systems CCG-GF Band - Pure Titanium Length 27cmGS181 PLUS Endoprothetik Cerclage System CCG Stabilizer with Band XS - L
PART A - Prostheses List by Category, Groups and Sponsor Page 413 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Howmedica IncorporatedHW300 Dall Miles Cable Grip System - Stainless Stainless Steel: Cable - Stainless Steel 1.6 and 2mm HW301 Dall Miles Cable Grip System - Stainless Stainless Steel: Sleeve - Stainless Steel 1.6 and 2mm HW302 Dall Miles Cable Grip System - Stainless Stainless Steel: Trochanter Grip - Small, Medium, Large
Stainless Steel
HW303 Dall Miles Cable Grip System - Stainless Stainless Steel: Cable & Sleeve - 1.6 and 2mm Stainless Steel
HW304 Dall Miles Cable Grip System - Stainless Stainless Steel: Cable & Sleeve Beaded - 1.6 and 2mm Stainless Steel
HW305 Dall Miles Cable Grip System - Stainless Stainless Steel Plate:5 hole - Stainless 6 inchesHW306 Dall Miles Cable Grip System - Stainless Stainless Steel Plate:7 hole - Stainless 8 inchesHW307 Dall Miles Cable Grip System - Stainless Stainless Steel Plate:9 hole - Stainless 10 inchesHW308 Dall Miles Cable Grip System - Stainless Stainless Steel Plate:11 hole - Stainless 12 inchesHW309 Dall Miles Cable Grip System - Vitallium Vitallium: Cable - Vitallium 1.6 and 2mmHW310 Dall Miles Cable Grip System - Vitallium Vitallium: Sleeve - Vitallium 1.6 and 2mmHW311 Dall Miles Cable Grip System - Vitallium Vitallium: Trochanter Grip - Vitallium Small, Medium and LargeHW312 Dall Miles Cable Grip System - Vitallium Vitallium: Mini Cleat. Vitallium One size onlyHW313 Dall Miles Cable Grip System - Vitallium Vitallium: Grooved Button - Vitallium One size onlyHW314 Dall Miles Cable Grip System - Vitallium Vitallium: Cable and Grip Combined - 1.6 and 2mm
Vitallium
HW315 Dall Miles Cable Grip System - Vitallium Vitallium: Cable and Sleeve - Vitallium 1.6 and 2mmHW316 Dall Miles Cable Grip System - Vitallium Vitallium: Cable and Sleeve Beaded - 1.6 and 2mm
Vitallium
Medtel Australia Pty LtdME146 C-Fix Cable Fixation System Titanium Leader Cable Assembly 1-1.3mm
Prostheses, Femoral Head
Stryker Australia Pty LtdST569 Unipolar head system Neck extention, vitallium alloy -4 TO +12mmST821 Titanium Adapter Sleeve For use with V40 spiggots/trunnions One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 414 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST927 Titanium Adapter Sleeve Composition - titanium, Morse taper Use with C-taper alumina heads 28, 32 and 36mm dia
Prostheses, Femoral, Upper
Corin Australia Pty LtdCR040 Dynamic Hip Screw Stainless steel lag screw 50mm -145mm lengthCR053 Corifix Dynamic Hip Screw System Dynamic Hip Compression Plate 135 Deg 2 or 4 hole
Stainless Steel
Howmedica IncorporatedHW048 Trochanteric Mesh Stainless Steel Small/LargeHW049 Trochanteric Mesh Wire mesh - Stainless Steel 50 x 50mm
Surgical HouseSU065 Supravit hydroxapatite granules - 30g
Taylor Bryant Pty LtdTB184 12/14 Modular U Necks Standard straight/Varus Antecerted Nalgise
Prostheses, Finger/Thumb
Advanced Surgical TechnologiesAD163 WMT Orthopaedic Implants Hand Trapezium silastic 1, 2, 3, 4, 5AD164 WMT Orthopaedic Implants Hand Silastic tendon spacer 24in long, 3, 4, 5, 6mm wide
De Puy AustraliaDP002 Roseland Thumb Trap CIM Small, LargeDP015 Roseland Thumb Meta 1/3 HAC & CIM Small, Large, XlargeDP017 Roseland Thumb Trap HAC Small, LargeDP573 Neuflex Finger Neuflex MCP implant - Anasil Silicone Size 0-60DY400 Neuflex Finger Neuflex PIP 1 to 20
PART A - Prostheses List by Category, Groups and Sponsor Page 415 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LMT Surgical Pty LtdLM011 Ascension PIP Pyrocarbon Total Joint Pyrocarbon Proximal Interphalangeal size 10, 20, 30,
40 distal, Proximal interphalageal size 10, 20, 30, 40 proximal
LM012 Ascension MCP Pyrocarbon Total Joint Pyrocarbon implant 10D/10P, 20D/20P, 30D/30P, 40D/40P, 50D/50P,
Mathys AustraliaMA081 Finger Prosthesis -distal, proximal, standard, large L18 D4.0 - L26 D6.0
Surgical HouseSU049 LPM finger joint prostheses Co Cr Alloy ceramic coated Small, medium & large
Taylor Bryant Pty LtdTB197 SR Hand Implant System SR Hand MCP/PIP/TMC (Basal Thumb) XS/S/M/L/XL, 1,2,3,4,5
Implants - CoCr- Titanium Alloy,
Prostheses, Foot
De Puy AustraliaDY135 Barouk Screws 2.5mm x 10-22mm
Prostheses, Foot Arch
Surgical HouseSU009 Kalix Flat foot implant titanium/UHWP 9-14mm diam
TiMax Surgical Pty LtdTI075 Futura Domed Subtalar Implant UHMWPE Extra small, small, medium, large, extra TI076 Futura Conical Subtalar Implant Titanium 7 - 12
Prostheses, Joint
Advanced Surgical TechnologiesAD159 WMT Orthopaedic Implants Finger/Thumb Silastic finger joint with/without Ti 00, 0, 1, 2, 3, 4, 5, 6
grommets 470 series
PART A - Prostheses List by Category, Groups and Sponsor Page 416 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medimen Australia Pty Ltd T/A Alpha Medical ServicesMM001 MOJE Toe and Finger Implants Includes distal and proximal implants
Smith & Nephew Surgical Pty LtdSN032 Compass Universal Hinge Circular external hinged fixator, graphite One size only
composite
SN661 Compass PIP Kit assembly includes 0.45 x 5" K Wires, Single sterile PIP Hinge Kit1 Small Pin Support Block, 1 Hexdriver, 1 Compass PIP (Packed Sterile)
Stryker Australia Pty LtdST818 Osteonics Solar Elbow System - humeral Titanium alloy with polyethylene bushing Standard, large
assembly
ST819 Osteonics Solar Elbow System - long Titanium alloy with polyethylene bushing Standard, largehumeral assembly
ST820 Osteonics Solar Elbow System - ulna Titanium alloy Small, standard, largecomponent
Taylor Bryant Pty LtdTB200 Proximal Interphalangeal Joint Implant Sutter Proximal Interphalangeal Joint 10, 20, 30, 40, 50
Implant - Silicon
TB201 Metacarpophalangeal Implant Sutter Metacarpophalangeal Joint Implant 00, 10, 20, 30, 40, 50- Silicon
Prostheses, Joint, Ankle
De Puy AustraliaDP871 Agility Ankle System Agility Ankle Talar Size 1 - 6DY082 Agility Ankle System Agility Ankle Tibial Shell Right and Left Size 1-6DY083 Agility Ankle System Agility Ankle Tibial Insert and +2 Size 1-6DY408 Agility Ankle System Mobile Bearing 1-6 from 3-11mmDY409 Agility Ankle System Wide Ankle Talus 1 to 6DY418 Mobile Ankle System Tibial Tray Size 1-6DY419 Mobile Ankle System Talus Size 1-6
PART A - Prostheses List by Category, Groups and Sponsor Page 417 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Endotec Australia Pty LtdEA001 B.P.U. Revision Total Ankle Prosthesis Ceramic coated titanium 1-6EA002 Buechel-Pappas Total Ankle Prosthesis - Ceramic coated titanium 1 to 6
replacement
Link Orthopaedic AustraliaLO001 Star (cemented) Talar Component Small , medium & largeLO002 Star (cemented) Tibial Component Small, medium & largeLO003 Star (cemented) Polyethylene Sliding Core 6- 10 mmLO004 Hydroxyapatite Coated (Hac) Talar Component Extra extra small, extra small, small,
medium & large
LO005 Hydroxyapatite Coated (Hac) Tibial Component Extra small, small, medium, large & extra large
Orthotech Pty LtdOH146 Ramses Total Ankle Replacement CrCo, Polyethylene - Tibial, Talar, Poly Tibial - Sml/Med/Large
Insert UHMWPE
OH147 Ramses Total Ankle Replacement CrCo, Polyethylene - Tibial, Talar, Poly Talar - Sml/Med/LargeInsert UHMWPE
OH148 Ramses Total Ankle Replacement CrCo, Polyethylene - Tibial, Talar, Poly Poly Insert UHMWPE - Sml 10-16/ Med Insert UHMWPE 11-17/ Large 12-18
Surgical HouseSU113 Hintegra Total Ankle Prosthesis Tibial implant Right and left, sizes 1 - 6SU114 Hintegra Total Ankle Prosthesis Talar implant Right and left, sizes 1 - 5SU115 Hintegra Total Ankle Prosthesis Sliding insert Sizes 1 - 5, thickness 5 - 9mmSU116 Hintegra Total Ankle Prosthesis Cortical fixation screw, Composition - Length 12 - 42mm
Stainless Steel
SU188 Hintegra Total Ankle Prosthesis Talar Implant - Flat talar resection Left - Size 1-5, Right - Size 1-5SU191 Hintegra Total Ankle Prosthesis Tibial Implant Right & Left, Sizes 1 - 6, Thickness
8mm or 12mm
Tornier Pty LtdTO001 Cheville Salto Ankle Prostheses Components include tibial, mobile Tibial/Talar Sizes 1small to 3 = x-large.
bearing, talar, malleolar for use as a total Mobile Bearing Thickness 4,5,6,7 mm. ankle prostheses, Ti CoCr Malleoloar Sizes 1 & 2
PART A - Prostheses List by Category, Groups and Sponsor Page 418 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Joint, Ankle, Tibial Component
Baxter Healthcare Pty LtdBX238 Alpha OSG Ankle Replacement - Tibia Cementless, HA, Titanium Nitride Surface 1 to 4BX239 Alpha OSG Ankle Replacement - Bearing Bearing, UHMWPE - Bearing Size 1 - 5, 7, 9, 11, & 13mm, Size 2 - 5,
7, 9, 11, & 13mm, Size 3 - 5, 7, 9, 11, & 13mm, Size 4 - 5, 7, 9, 11, & 13mm
BX251 Alpha OSG Ankle Replacement - Talus Cementless Titanium Nitride Surface Size 1, 2, 3, 4
Prostheses, Joint, Elbow
Advanced Surgical TechnologiesAD156 Sorbie Questor Elbow System Total joint CoCr and UHMWPE Left and right in sizing 48mm wide,
46mm, 44mm
Biomet Australia Pty LtdBI016 IBP Elbow Cemented, UHMWPE, Titanium, Cobalt Small Standard, Large, Xlarge
Chrome
BI017 Kudo Elbow Humeral Component, Cemented , Cobalt Small, LargeChrome
BI018 Kudo Elbow Ulnar Component, Cemented, Titanium Small, Large BI019 Kudo Elbow Humeral Component, Uncemented, Cobalt Small, Large
Chrome
BI020 Kudo Elbow Ulnar Component, Uncemented, Titanium Small, Large BI695 Liverpool Radial Head Replacement System Porous Coated CO CR Stem 16 x 18mm length, 18 x 14 - 28mm BI781 Discovery Elbow System UHMWPE, Ti 3 - 6 mm x 75 - 150 mm
De Puy AustraliaDY137 Acclaim Elbow Humeral Stem, Std/Lge 100-200mmDY138 Acclaim Elbow Ulnar Stem, Std/Lge-Left/Right 60-85mmDY139 Acclaim Elbow Humeral Bobbin One size onlyDY140 Acclaim Elbow Linked Ulnar Metal Bearing or One size only
Polyethylene Yoke
PART A - Prostheses List by Category, Groups and Sponsor Page 419 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY142 Acclaim Elbow Pin Assembly or Pin or Poly sleeve or One size onlyUnlinked Poly Ulnar
DY146 Acclaim Elbow Linked Ulnar Bearing Screw One size onlyDY288 Acclaim Elbow Unconstrained Ulnar Poly Bearing 15mm
Howmedica IncorporatedHW377 Souter Strathclyde Elbow Humeral - Long stem, left and right Medium, LargeHW378 Souter Strathclyde Elbow Ulnar - Retentive, non retentive 50 - 90mm (Non), 70 - 90mm (Retentive)HW379 Souter Strathclyde Elbow Revision Humeral - Custom, Long Stem A, B, C, DHW380 Souter Strathclyde Elbow Revision Ulnar - Custom, Long stem Small, Medium
Link Orthopaedic AustraliaLO008 LINK Elbow Prosthesis Small, medium & large
Tornier Pty LtdTO013 Tornier Latitude Total Elbow Prosthesis Ulnar Cap Small, Medium, Large
ZimmerZI003 Coonrad-Morrey Elbow Ulna - Titanium Petite, Left, RightZI004 Coonrad-Morrey Elbow Humerus - Titanium 4, 6, 8 inch, Left & RightZI005 Coonrad-Morrey Elbow Bushing - Polyethylene, Titanium 1 & 2ZI342 GSB Cemented Elbow GSB Humerus - CoCr alloy/PE 76,86,86L ZI343 GSB Cemented Elbow GSB Humeral Medullary Plug - PE One size onlyZI344 GSB Cemented Elbow GSB Ulna Component - CoCr alloy 12/71,12/61,16/71,16/61ZI345 GSB Cemented Elbow GSB Washer - PE 2/12,4/12,6/12,2/16,4/16,6/16 ZI464 GSB Elbow Ulna Extension One size onlyZI465 GSB Elbow Special Bushing for Humerous Length 76 - 86mm
Prostheses, Joint, Hip
Advanced Surgical TechnologiesAD118 Transcend Articulation System Interseal apical plug titanium One size onlyAD120 Transcend Articulation System Bone screw titanium 6.5mm x 1.5 - 6cm in 0.5cm increments
PART A - Prostheses List by Category, Groups and Sponsor Page 420 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD131 WMT Perfecta Hip System PMMA cement spacer/Bone Plug 9 - 21mm in 1mm incrementsAD177 Nexus II Hip System Distal Cement Spacer 9-21mm in 1mm increments
Corin Australia Pty LtdCR041 Hardinge Canal Occluder UHMWPE One size onlyCR044 Taper Fit Hip System Canal Occluder Polymethyl Methacrylate Small & StandardCR054 DC Fit Acetabular Cup System Bone screw, cancellous CoCr Diameter 6.5mm, length 10-50mmCR081 Oxford Hip System Cement Wiper One size only
Global Orthopaedic TechnologyGO019 UniSyn Hip System Locking nut Ti 30-54mmGO041 Consensus Hip System 6.5mm Ti Cancellous Bone Screws 15mm to 50mmGO042 Consensus Hip System Protrustion Spacer Ti 42mm to 68mm
Orthotech Pty LtdOH145 Coriolis CrCo - Fixation screws, Support Ring Support Ring - 44-64
Smith & Nephew Surgical Pty LtdSN019 Low Profile Classic Compression Hip 130 - 150 deg Hot forged stainless steel 5 - 6 holes
Screw System
SN020 Osteotomy Plates Blade, 130 deg Adult osteotomy 50 - 110mmSN021 Osteotomy Plates Blade, 95 deg Adult osteotomy 50 - 80mmSN022 Osteotomy Plates Blade, Adult osteotomy 4 hole 40 - 80mmSN023 Osteotomy Plates Blade, 90 deg adolescent osteotomy 3 40 - 60mmSN024 Osteotomy Plates Blade, 130 deg Angled Blade Plate Small shaft 60 - 152mm
Stature 50 - 80mm
SN025 Osteotomy Plates Blade, 95 deg Condylar Blade 40 - 70 Shaft 92 - 156mmSN027 Osteotomy Plates Blade, 115 deg Bifurcated Infant 30 - 35mmSN036 Osteotomy Plates Blade, Child Osteotomy 80 -100 deg 35 - 45mmSN139 Osteotomy Plates Blade, 90 deg Infant Osteotomy 25 - 32mmSN140 Low Profile Classic Compression Hip 130 - 150 deg Hot forged stainless steel 3 - 4 holes
Screw System
PART A - Prostheses List by Category, Groups and Sponsor Page 421 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI288 Harris/Galante Porous Hip Prostheses HGII XLPE Liner Outer Dia 38 - 80mm, Inner Diameter 22,
26, 28 or 32
Prostheses, Joint, Hip, Acetabular Component
Biomet Australia Pty LtdBI702 Par 5 Protrusio Acetabular System Screws - Titanium Metal 6.5mm
Corin Australia Pty LtdCR072 Alpha Lock, Plug Screw Plug Screw, Titanium One Size Only
Global Manufacturing Technology Pty LimitedGM011 Batcup 6.5mm Ti Cancellous Bone Screws 12mm to 45mm
ZimmerZI461 Converge Acetabular System Revision Porous Shell, Ti alloy 39 - 81mm
Prostheses, Joint, Hip, Femoral Component
De Puy AustraliaDP884 Streamline Centraliser - Size 11-16DY147 C-Stem End Cap One size onlyDY168 G2 Hip System Distal Centraliser 1 - 11DY403 Modular Cathcart Unipolar Spacers -3 to +10mm
Mathys AustraliaMA018 Intramedullary Plug Cement Restricter Small to Extra LargeMA026 Distal Centraliser For fullfix stem - PMMA Dia 8.0/9.5mm - 15/12mm
Orthotech Pty LtdOH200 Lima Modulus Hip System Modular total Hip Replacement, Titanium Neck w/screw, small and large
Smith & Nephew Surgical Pty LtdSN753 Accord Cable System Titanium Plate 150mmSN754 Accord Cable System Titanium Plate 250mm
PART A - Prostheses List by Category, Groups and Sponsor Page 422 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN755 AccordCable System Titanium Plate 200mmSN756 Accord Cable System Cable Screw Standard, Low ProfileSN757 Accord Cable System Cable Spike Standard, Low Profile
Stryker Australia Pty LtdST801 Accolade C Femoral Hip System Distal modular PMMA spacer Small, medium, large
Taylor Bryant Pty LtdTB063 Groupe Lepine U Neck Straight/anteverted/retroverted/
ZimmerZI311 Spacer-G Temporary implantable device for the Short Stems, Head size 46mm, 54mm,
treatment of infected total hip replacement, Composition - stainless steel core surrounded by PMMA impregnated
ZI312 Spacer-G Temporary implantable device for the Long Stems, Head size 46mm, 54mm, treatment of infected total hip replacement, Composition - stainless steel core surrounded by PMMA impregnated
Prostheses, Joint, Hip, Total
B Braun Australia Pty LtdBB238 Acetabular Fixation Screws Isotan 16mm-68mmBB245 Distal centraliser PMMA 7mm - 18mm
Biomet Australia Pty LtdBI098 Kent Hip System Transverse Screws, Titanium 4.5mm x (26-55mm)BI105 Bi Hapro Hip System Acetabular Screws, Titanium Alloy 6.5mm x(15 to 50mm) BI109 Mallory Head Hip System Screw, Acetabular (6.5 - 5.5)mm dia x (15 - 70)mm lengthBI122 Mallory Head Hip System Trochanter Bolt, Titanium Round/OblongBI123 Mallory Head Hip System Trochanter Plate, Titanium Sizes 40-70BI124 Modular Calcar Mallory Head Revision Trochanteric Claw, Titanium Medium, Large
Hip System
BI125 Modular Calcar Mallory Head Revision Trochanteric Connector Sizes 40-70mmHip System
PART A - Prostheses List by Category, Groups and Sponsor Page 423 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI130 Bio-Plug Cement Restrictor Canal Plug, UHMWPE 10-20mmBI131 Mallory Head Hip System Femoral Sleeve, UHMWPE 9-17mmBI140 Mallory Head Hip System Acetabular Shell, Ringloc. Replacement Size 1
Ring, Titanium alloy
BI144 Bio-Plug Cement Restrictor Compression plug, PMMA Sizes 8-25mmBI247 Bio-Plug Cement Restrictor Bone Plug, HMWPE 7-18mm
Corin Australia Pty LtdCR027 Freeman -Morgan Total Hip System Canal occluder 12,14,16mm diameterCR079 Oxford Universal Hip System Distal stem lock nut One size onlyCR080 Oxford Universal Hip System Cement restrictor 22, 26, 28 & 32mm
De Puy AustraliaDP192 Thackray Hip System Charnley cement restrictor EA One size only
Polymethylmethacrylate
DP224 Thackray Hip System Charnley Spring Wires - Stainless Steel 0.5mm to 3.00mmDP250 Anatomic Medullary Locking System Locking Rings Titanium Size 38 - 74DP296 Cementraliser Cementraliser Size 10 -13DP297 Cementraliser Stem Centraliser Distal Centralisers 10-18mmDP298 Centralisers Centraliser Size 11 - 18DP976 SROM Total Hip System (Titanium) Locking Pin Acetabular 5.0mmDP986 SROM Total Hip System (Titanium) Trochanteric Washer 40 x 31, 60 x 45, 70 x 54DP998 SROM Total Hip System (Titanium) Acetabular Apical Hole Plug One size onlyDP999 SROM Total Hip System (Titanium) Unipolar Adaptor Sleeve +10DY020 SROM Total Hip System (Titanium) Trochanteric Screw 42mm, 52mm, 62mm
Global Scientific Pty LtdGS188 PLUS Hip Joint Prostheses System CPS Centralizer 1 to 5GS189 Prostheses, Joint, Hip, Total Screws Cancellous EPF/Plus fit. 15-60mm long 6.4mm diaGS190 Prostheses, Joint, Hip, Total Revision Module 1 to 12
Howmedica IncorporatedHW011 ABG Hip System Screw - Titanium, used with ABG11 12,15,20,25,30,35,40,45 and 50mm
PART A - Prostheses List by Category, Groups and Sponsor Page 424 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW012 ABG Hip System Spikes - Titanium, used with ABG11 7mm, 8mm, 9mm lengthsHW034 Definition PM Femoral Component Distal Centraliser - PMMA - Ring 11-22mm
Centraliser
HW047 Exeter Hip System X-Change Bone Screws - Stainless Steel 3.5mm X 10, 15, 20, 25, 30, 35mmHW057 RELIANCE HIP Distal Centraliser - PMMA 10-18mmHW071 Vitalock Acetabular System Cancellous Bone Screw - Vitallium 12mm to 30mm in 2mm increments -
35mm to 50mm in 5mm increments
Orthotech Pty LtdOH102 Lima Total Hip Replacement System UHMWPE Cement Plug 8mm - 16mmOH110 Lima Total Hip Replacement System Lateralising Spacer B, C, D, EOH111 Lima Total Hip Replacement System Titanium Bone Screw 20 - 60mm
Smith & Nephew Surgical Pty LtdSN269 CPCS Polished Cemented Stem Distal 8 - 18SN284 Screws Cancellous 15mm - 50mmSN292 Reflection Fixation peg Titanium Alloy One size onlySN307 Unipolar Taper Sleeve Co Cr 12/14 and 14/16 tapers, +0,-SN361 ITH Trunnion Sleeve One size onlySN364 Matrix: Modular Hip System Revision Distal Sleeve, Porous and Non- Straight Sizes 8-16, 10 - 21mm, x
Porous +10mm, 60mm ; Bowed Sizes 8 - 16, x +85mm, +135mm.
SN365 Matrix: Modular Hip System Sleeve -Trunnion One size only
Stryker Australia Pty LtdSK315 Exeter Hip System Exeter Distal Centraliser -PMMA One Size OnlyST545 Osteonics hip prostheses Cancellous bone screw, Titanium 6.5mm & 5.5mm diaST551 Osteonics hip prostheses Dome hole plug titanium One size onlyST581 Osteonics hip prostheses Distal spacer PMMA 8-15mmST582 Osteonics hip prostheses Cement restrictor Polyethylene Universal and sizes 1-8ST596 Osteonics hip prostheses Custom made for extended indications Custom made per patient
titanium, polyethylene, vitallium
Tornier Pty LtdTO006 Bone Plug UHMWPE - Cement Plug 24mm
PART A - Prostheses List by Category, Groups and Sponsor Page 425 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI013 Zimmer Hip Systems Femoral Stem CPT PMMA Centraliser PMMA Size 1ZI020 Zimmer Hip Systems Femoral Stem VerSys Proximal Centraliser - PMMA 11 - 17ZI021 Zimmer Hip Systems Femoral Stem VerSys Distal Centraliser - PMMA 10 - 18ZI036 Acetabular Cup Trilogy Bone Screw - Titanium 15 - 60ZI188 Zimmer Bone Cement Systems Poly Medullary Plug - PMMA 8 - 23 mmZI329 CPT Impaction Grafting Mesh Titanium Femoral or acetabular mesh 6 sizes acetabular rim (small and large),
medial wall (small and large), flat and femoral meshes
ZI366 Natural Hip System Distal Centraliser - PE 10 to 19ZI374 MS-30 Hip prosthesis Centralizer for Cemented Stems (Protek) 8 to 18
- metal alloys
ZI473 APR Conversion Ring Titanium 39 to 71ZI474 Durom Hip Resurfacing System - Forged CoCr allo A1 to L1
Adaptor Sleeves
Prostheses, Joint, Knee
Corin Australia Pty LtdCR001 Rotaglide + Total Knee System, Tibial Latched, Porous Coat Ex Sml - Ex Lge
Component
De Puy AustraliaDP384 AMK Total Knee system Primary Locking Pin S/S One size only
Smith & Nephew Surgical Pty LtdSN339 Genesis Compression Screws 16-22mmSN342 Genesis Custom Flex Lock Peg Left & rightSN343 Genesis Custom Peg 10x65mm - 20x325mmSN346 Genesis Flex-Lok Peg Fem & TibialSN347 Genesis I/M Peg: Femoral and Tibial: Titanium 10-16mm Diameter x 40-200mm LengthSN357 Genesis Tibial Compression Screw 16-22mm
PART A - Prostheses List by Category, Groups and Sponsor Page 426 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN376 Profix I/M Peg Femoral or Tibial 10-20mm x 100mm. 10-20x150mm 10-20 x 200mm
SN377 Profix Metaphyseal Tibial Stem 14-20mmSN393 Profix Tibial Screw 15-50mmSN723 Genesis II Revision Tibial Wedge Screw 10-100mm
Stryker Australia Pty LtdST044 Scorpio Augmentation Locking Screw Cobalt Chrome 5-15mm
ZimmerZI060 NexGen Tibial Component - Fluted Titanium Sizes 1 - 10
Mobile Precoat
ZI079 Miller Galante I Bone Screw - Ti 20 - 60mmZI089 Miller Galante II Bone Screw - Ti 20 - 80mmZI132 NexGen Knee High Tibial Osteotomy Plate - Ti 1 - 10ZI133 NexGen Knee High Tibial Osteotomy Screw - Ti 4.5 - 10 - 80 mm, 6.5 - 10 - 80 mmZI313 Spacer-K Temporary implantable device for the Small, Medium, Large
treatment of infected total knee replacement, Composition - stainless steel core surrounded by PMMA impregnated
ZI398 High Tibia Osteotomy High Tibia Osteotomy - Ti alloy L shaped steel alloy plate; Standard & ZI406 Natural Knee Tibial Spacer Screw - Ti alloy One size onlyZI407 Natural Knee Tibial Spacer Peg - Ti alloy One size only
Prostheses, Joint, Knee, Femoral Component
Surgical HouseSU190 METS Modular Proximal Femur Modular system, comprising Various
Trochanters, Shafts, Stems, Stem
Taylor Bryant Pty LtdTB305 HemiCAP Contoured Articular Knee System Fixation Screw - Titanium Component for 15mm & 20mm Articular $0.00 $0.00
Components Screw 9.5mm Dia x 20mm
PART A - Prostheses List by Category, Groups and Sponsor Page 427 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Joint, Knee, Total
Advanced Surgical TechnologiesAD176 Advantim Total Knee System Bone Screws Tibial and Femoral Titanium 6.5mm x 1.5-6cm in 0.5cm increments
Australian Surgical Design & Manufacture Pty LtdAE042 Active Knee System Bone Screw Titanium 20mm - 50mm
B Braun Australia Pty LtdBB148 Search Total Knee System Cemented Femoral Implant Left & Right F1 - F5BB149 Search Total Knee System Tibial Insert LC/LCR E10 - E16. T1 - T5BB150 Search Total Knee System Tibial Plateau LC/PS T1 - T5BB151 Search Total Knee System Tibial Plateau T1 - T5BB152 Search Total Knee System Revision Tibial Block/Coin 4 - 8mm, T1 - T5BB154 Search Total Knee System Revision TKA Accessory Block 4 - 8mm, T1 - T5
Biomet Australia Pty LtdBI173 Maxim Complete Knee System Tibial Locking Bar, Titanium One size only
Global Orthopaedic TechnologyGO003 RBK Total Knee System - Tibial base No coatings 1-5GO004 RBK Total Knee System - Tibial base Porous coating 1-5GO021 Consensus Knee System Femoral component nonporous CoCr and 1-6 L & RGO022 Consensus Knee System Femoral component porous CoCr 1-6 L & RGO023 Consensus Knee System Femoral component porous CoCr/Ti 1-6 L & RGO024 Consensus Knee System a) Stemmed tibial baseplate nonporous a) 1-6 L & R; b) 1-6 L & R
CoCr; b) Stemmed tibial baseplate CCM nonporous Ti
GO025 Consensus Knee System Resurfacing tibial baseplate porous Ti 1-6 L & RGO026 Consensus Knee System Stemmed tibial baseplate porous CoCr/Ti 1-6 L & RGO027 Consensus Knee System Congruent tibial insert UHMWPE 1-2 to 5-6 L & R 10-18mmGO028 Consensus Knee System a) PCL substituting tibial insert; b) a) 1-2 to 5-6 L & R 10-18mm; b) 1-2 to
Posterior stabilized tibial insert 5-6 L & R 10mm-18mm
PART A - Prostheses List by Category, Groups and Sponsor Page 428 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GO029 Consensus Knee System Patellar component porous Ti/UHMWPE 10mm sz 1-3GO030 Consensus Knee System Patellar component all UHMWPE 7.5mm sz 0-2; 10mm sz 1-3
Link Orthopaedic AustraliaLO038 LINK Endo Model Rotational Knee Intracondylar Total Rotation Knee Joint: Small, medium & large
Without Patella Flange
LO039 LINK Endo Model Rotational Knee Intracondylar Total Rotation Knee Joint: Small, medium & largeWith Patella Flange
LO040 LINK Endo Model Rotational Knee Intracondylar total rotation knee join with Small, medium & largeAnti Lux device: without patella flange
LO045 LINK Endo Model Rotational Knee Total Rotational Knee Joint with Anti Lux Small, medium & largeDevice, with Patella Flange and Replacement of Femoral and/or Tibial Bone Structures, proximal tibia
LO056 LINK T.A.C.K. Knee Hydroxyapaptite Coated (Hac): tibial 9- 16.5mm
Orthotech Pty LtdOH159 Academia Knee CoCr, Titanium, Femoral, Tibial, Bearing, Stems 70-140 length/ 10-14mm dia
Stems & Patellar
Smith & Nephew Surgical Pty LtdSN318 Genesis II Lug One size onlySN319 Genesis II Metaphyseal Stem 1-8SN329 Genesis II Tibial screws 15-50mmSN367 Mobile Bearing Knee Locking Screw Co Cr One size only
Stryker Australia Pty LtdSK091 Duracon Total Knee System Tibial Insert CS-Lipped - Duration XS,S,M,L,XL Thickness
Polyethylene 9,11,13,16,19,22,25mm
Prostheses, Joint, Shoulder
Advanced Surgical TechnologiesAD184 Olympia-Total Shoulder System Cobolt chrome head standard & +/-3mm 40,44,48,52,56,60mmAD201 Olympia - Total Shoulder System Slotted and non slotted stem Length 72 & 125mm, width 6 - 16mmAD202 Olympia - Total Shoulder System Revision stem Length 175 & 225mm, width 10 - 16mm
PART A - Prostheses List by Category, Groups and Sponsor Page 429 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD203 Olympia - Total Shoulder System All poly finned glenoid 40, 44, 48, 52, 56, 60mm
Biomet Australia Pty LtdBI207 Bi-Angular Shoulder System Humeral Prostheses, Titanium 6.5mm-14mmBI208 Bi-Angular Shoulder System Bi Polar Shell, Titanium/ Size 40-60mm
UHMWPE/Chrome Cobalt
BI209 Bi-Angular Shoulder System Bi Polar Head, Chrome Cobalt Std to +4mmBI210 Bi-Angular Shoulder System Glenoid Metal backed. UHMWPE, Titanium Small Medium Large x 4 or 7mmBI211 Bi-Angular Shoulder System Glenoid, UHMWPE Small Medium Large x 4 or 7mmBI212 Bi-Angular Shoulder System Humeral Head, Chrome Cobalt 40-52mmBI213 Bio-Modular Shoulder System Bi-Polar cup 40-60mmBI214 Bio-Modular Shoulder System Bi-Polar shell/ Titanium, chrome Cobalt 40-60mmBI215 Bio-Modular Shoulder System Humeral Head, Chrome Cobalt 40-54mmBI216 Bio-Modular Shoulder System Humeral Stem, titanium 6-15mmBI217 Bio-Modular Shoulder System Glenoid Component, Cemented, Small, Medium, Large x 4 or 7mm
Titanium/UHMWPE
BI218 Bio-Modular Shoulder System Modular Head, Chrome Cobalt Std, +2, +4mmBI219 Bio-Modular Shoulder System Glenoid Liner Noncemented, UHMWPE Low ProfileBI220 Bio-Modular Shoulder System Glenoid Screw 5mm x (15-40mm)BI221 Bio-Modular Shoulder System Glenoid Shell, Titanium Low ProfileBI222 Bio-Modular Shoulder System Shoulder Offset Head, Chrome Cobalt 40-54mmBI223 Nottingham Shoulder System Humeral Stem, Chrome Cobalt, Titanium 6-12mmBI224 Nottingham Shoulder System Humeral Head, Chrome Cobalt Std +2, +4mm BI225 Nottingham Shoulder System Glenoid Tray, Chrome Cobalt Size 3, 4, 5. BI226 Nottingham Shoulder System Glenoid Bearing, UHMWPE Size 3, 4, 5.BI227 Kirschner Integrated Shoulder System Neer II Humeral, Chrome Cobalt, Stem 6.3 to 12.7mm Head 15-22mmBI228 Kirschner Modular Shoulder Humeral Head, Modular, Chrome Cobalt 38-51mmBI229 Kirschner Modular Shoulder Humeral Stem, Chrome Cobalt 6.3 -15.9mmBI230 Kirschner Modular Shoulder Glenoid Component, UHMWPE Small, Std
PART A - Prostheses List by Category, Groups and Sponsor Page 430 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI231 Humeral Replacement System Proximal Shoulder System: Chrome Body: std, +10mm Stem 6.5-12.5mm Cobalt, Titanium, UHMWPE Sleeve 6.5-12.5mm Humeral Head 40-
BI342 Copeland Shoulder System Glenoid, UHMWPE One size onlyBI343 Copeland Shoulder System Humeral, Chrome Cobalt Small, Std, Large (no specific size)BI344 Copeland Shoulder System Glenoid Component, HA Coated, Chrome Small, Std, Extra Deep (no specific size)
Cobalt, UHMWPE
BI345 Copeland Shoulder System Humeral Component, Chrome Cobalt Small, Std, Large (no specific size)BI835 Bio-Modular Shoulder System Extended Articular Surface Humeral 40 - 54mm
Head, CrCo
BI880 Mosaic Humeral Replacement System Mosaic System - CoCr, Ti Proximal Body - Std to +20BI881 Mosaic Humeral Replacement System Mosaic System - CoCr, Ti Segment - 80 to 140 mmBI882 Mosaic Humeral Replacement System Mosaic System - CoCr, Ti Stem - 6.5 to 14.5 mm x 50 to 200 mm
De Puy AustraliaDP020 Global Advantage Shoulder Eccentric Head, Cobalt chrome alloy 44- 56mm x 18, 21mmDP029 Global Advantage Shoulder Revision Stem Titanium alloy 8mm x 200mm - 14mm x 220mmDP030 Global Advantage Shoulder Stem Standard, Titanium alloy 6mm - 16mmDP077 Global Advantage Shoulder Global Advantage Stem STD or Long Size 8 to 14 or Length 6-16mmDP081 Global Shoulder Global Advantage HUM HD Size 44 - 52 by size x 15 /18 or 21DP086 Global Shoulder Global FIN/ Peg Glenoid Size 40-56DP898 S-Fit Metal Glenoid S-FIT Glenoid Bearing Size 40-52DP899 S-Fit Metal Glenoid S-FIT M/B Glenoid Size 40-52DP950 Delta Shoulder system Standard Metaglene INOX/ ST. Steel + One size only
Aluminia+HAC
DP951 Delta Shoulder system Revision Metaglene INOX/ ST. Steel + One size onlyAluminia+HAC
DP952 Delta Shoulder system Centror Glenoid INOX / ST.Steel / Size 36-40 /42Nichtrostender St.
DP954 Delta Shoulder system Metaglene Screw Stainless Steel 3.5mm and 4.5mmDP956 Delta Shoulder system Cementless Diaphysis INOX/ ST. Steel + Size 1-4
Aluminia+HAC
DP957 Delta Shoulder system Cemented Epiphysis INOX/ ST. Steel + Size 1-4 in 26-42mmAluminia+HAC
PART A - Prostheses List by Category, Groups and Sponsor Page 431 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP958 Delta Shoulder system Humeral Cup Laterilised Polyethylene 36-42mm in +0 to +6 /STD / LAT /STD Retentive
DP962 Delta Shoulder system DELTA Humeral Head INOX / ST.Steel / 36 - 42 mm in +0-+4Nichtrostender St.
DP964 Delta Shoulder system Humeral Spacer INOX / ST.Steel / Dia 36/42 + 9Nichtrostender St.
DP965 Delta Shoulder system Revision Cementless Diaphysis INOX / Size 1-4ST. Steel + Aluminia+HAC
DP966 Global FX Shoulder Global FX Stem Chrome 6-12mm and STD and revision 160-220mm length
DY129 Global Advantage CTA Head 44 x 18 - 56 x 23DY273 Global FX Porocoat FX PC Stem Standard / Long 6-12mmDY360 Global Advantage Shoulder Anchor Peg Glenoid 40 to 56 mm
Device Technologies Australia Pty LtdDE168 Univers 3D Shoulder Prostheses Stem 6-12mmDE169 Univers 3D Shoulder Prostheses Glenoid Metal Back Small, Medium, LargeDE170 Univers 3D Shoulder Prostheses Glenoid PE-Inlay Small, Medium, LargeDE171 Univers 3D Shoulder Prostheses Metal Head 43/15 - 51/22DE172 Univers 3D Shoulder Prostheses Cemented glenoid Small, Medium, LargeDE173 Univers Fracture Prostheses Shaft 8-13mmDE174 Univers Fracture Prostheses Metal head 43/15 - 51/22
Mathys AustraliaMA033 RM Shoulder With & without shaft/ distal/ proximal/ Distal 9-11 / proximal 11-14 / length 70-
diaphyseal prosthesis/ shoulder tumor 110mm / head 38-50 / stem 9-14 / shaft prosthesis 30mm - 150mm
MA080 Radial Head Prosthesis / Type A & B D20, D08 - D24, D10MA422 Articula Shoulder Prosthesis Modular shoulder prosthesis for shoulder Stem 8, 9.5, and 11mm diameter,
arthroplasty Lengths 125 & 175mm, Head 46, 48 &
Medical & Optical Instruments Australia Pty LtdMO147 Acumed Shoulder Joint Prostheses Titanium 130 to 280mm stem,13 to 15mm body,
16 to 23mm head.
PART A - Prostheses List by Category, Groups and Sponsor Page 432 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthotech Pty LtdOH082 Lima RPS Tumor System RPS Humeral Head 46, 52, 58mmOH083 Lima RPS Tumor System RPS Total Shoulder Replacement Stem 200, 240, 280mmOH084 Lima RPS Tumor System RPS Additional Spacer 40, 60, 90, 120mmOH085 Randelli Total Shoulder Randelli Shoulder Uncemented Stem 8 - 16mmOH086 Randelli Total Shoulder Randelli Neutral Taper 0 - 6mmOH087 Randelli Total Shoulder Randelli Humeral Head 42, 46, 50, 54mmOH088 Randelli Total Shoulder Randelli Eccentrical Adapter 0 - 6mmOH089 Randelli Total Shoulder Randelli Humeral Body with Locking Screw One size onlyOH090 Randelli Total Shoulder Randelli Shoulder Cemented Stem 8, 10, 12, 14, 16mmOH113 Lima Randelli Shoulder System Cemented Glenoid Mini, Small, StandardOH114 Lima Randelli Shoulder System Uncemented Glenoid Mini, Small, StandardOH115 Lima Randelli Shoulder System Uncemented Glenoid Liner Mini, Small, Standard
Smith & Nephew Surgical Pty LtdSN395 Cofield Humeral stem component Standard & Long, small- largeSN396 Cofield Screw Long, Short, StandardSN397 Cofield Glenoid All Polyethylene component Small, StandardSN398 Cofield Glenoid Component Metal backed Standard Base. Base Insert. Glenoid
Comp Sm, Stan, St W/off
SN399 Cofield Glenoid Insert Small, StandardSN400 Modular Cofield + 2 insert Small, Standard, Standard with offsetSN401 Modular Cofield All Poly + 2 insert Small, Standard, Standard with offsetSN402 Modular Cofield All poly & +2 All Poly Glenoid Small - LargeSN403 Modular Cofield Humeral Head 14x36mm - 36x58mmSN404 Modular Cofield Humeral Stem 6mmx115mm - 16mmx245mmSN405 Modular Cofield Metal backed Glenoid Screw Small, Standard, LargeSN406 Modular Cofield Metal backed Glenoid Small/Standard/ Posterior AugmentedSN407 Modular Cofield Posterior Lipped All poly Glenoid Small - LargeSN408 Modular Cofield Posterior Lipped Articular Insert Small - Large
PART A - Prostheses List by Category, Groups and Sponsor Page 433 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN409 Modular Cofield Standard Articular Insert Small, StandardSN410 Neer Neer II Humeral 22 x 6.3-9.5mm, 33 x 12.7mm, 15 x 6.3-
12.7mm
SN411 Neer Neer II Glenoid Standard Glenoid Resurf Glenoid XS Metal Back Glenoid XS
SN668 Standard Stems Humeral Components Modular Shoulder System, Chromium 6 - 16mm Diameter, 125 - 175mm SN669 Standard Humeral Components Modular Shoulder System Humeral Head, 11.25 - 25mm Height, 40 - 49.5mm
Chromium Cobalt
SN676 Genoid Components Anatomic Glenoid Component, Ti-6A1- Extra Small & Standard4V, UHMWPE
Stryker Australia Pty LtdST027 Solar - Dual Offset Humeral Head Cobalt Chrome 40-50mm diameter, 15-21mm thicknessST672 Osteonics Solar Shoulder Prostheses Humeral head polyethylene 40-55mm by 12-34mmST673 Osteonics Solar Shoulder Prostheses Dual offset humeral head polyethylene 40,45,50mm Diameter by 15, 18, 21mm
Thickness
ST674 Osteonics Solar Shoulder Prostheses Humeral stem polyethylene 3,5,7,9,11ST675 Osteonics Solar Shoulder Prostheses Glenoid component polyethylene 5,7,9,11ST676 Osteonics Solar Shoulder Prostheses Solar bipolar humeral inner head, cobalt 22mm with 0, +2 and +4mm neck
chromium
ST877 Osteonics Solar Shoulder Prostheses Solar bipolar humeral outer head, cobalt 22mm with 0, +2 and +4mm neck chromium
Tornier Pty LtdTO002 Aequalis Primary Shoulder Prostheses Includes Glenoid component, Humeral 6.5-15mm - 1mm increm wide, 66-
Stem & Screw + Humeral Head, Ti CoCr 167mm long
TO003 Aequalis Primary Shoulder Prostheses Humeral Head CoCr, includes the Glenoid Diameter: 37,39,41,43,46,48,50,52mm component, Humeral Stem & Screw + Humeral Head.
TO004 Aequalis Primary Shoulder Prostheses UHMWPE Keeled Glenoid Component 31mm,35mm,39mm dia (small, medium & large)
TO010 Aequalis Shoulder Prostheses Reverse Ti,CoCr, UHMWPE Reverse Humeral Stem 6.5-15mm dia, 100-210mm long. Stem, Gleno sphere, metaphysis, base Base plate, sphere,metaphysis (diameter plate, insert & fixation screws 36 & 42mm). Insert (dia 36 & 42mm
x6,9,12mm high. Screws dia 4.5 x 18-
TO011 Aequalis Shoulder Prostheses Reverse CoCr Reverse Humeral Neck diameter 36 & 42mm wide x 9mm high
PART A - Prostheses List by Category, Groups and Sponsor Page 434 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ZimmerZI289 Bigliani Shoulder System Cobalt Chrome Lengths 130 - 200mm, Thickness 6 - ZI300 Bigliani Shoulder System Bigliani-Flatow Shoulder - Heads (Cobalt 40, 46, 52, 52mm diameters
chrome)
ZI304 Bigliani Shoulder System Bigliani-Flatow shoulder - Glenoid 40, 46 and 52mm diameters(UHMWPE)
ZI319 Bigliani Flatow Total Shoulder System - Trabecular Metal Backed Glenoid Diameter 40 - 52mmGlenoids (uncemented)
ZI436 Anatomical Humeral Stem Cemented - CoCr alloy Sizes 7,9,12,14ZI437 Anatomical Revision Humeral Stem - CoCr alloy Sizes 7,9,12,14ZI438 Anatomical Revision Humeral Stem Cementless - Ti Sizes 7,9,12,14ZI439 Anatomical Humeral Head -CoCr alloy 14 to 28mmZI440 Anatomical Glenoid - PE S, M, LZI441 Select Shoulder Humeral Head Eccentric - CoCr alloy 44/19 to 56/32 ZI442 Select Shoulder Glenoid - PE S, M, L, XL ZI443 Select Shoulder Stem - Ti alloy 7mm Short to 14.5mmZI444 BiPolar Head Humeral Head used with Select Shoulder 26/42 to 26/60
Humeral Stem - CoCr alloy/ PE
ZI445 Intermedics Select Shoulder UniPolar Head -metal alloy 40 x 16mm to 56 x 32mmZI446 Intermedics Select Shoulder Long Stem - Ti alloy 7 to 14.5mm
Prostheses, Joint, Toe
Advanced Surgical TechnologiesAD100 Metal Orthopaedic Toe Joint Implant Metal Hemi toe implant, cobalt chrome 11 x 16 x 12mm, 13 x 19 x 14mm, 15 x
22 x 16mm
AD107 WMT Orthopaedics Implants Hinge Toe Hammertoe implant titanium 1, 1S, 1L, 1W, 2, 2L, 2Sand Hammertoe Implant
AD108 WMT Orthopaedics Implants Hinge Toe Silastic flexible hinge toe HP100-426 6 & 7and Hammertoe Implant without grommets
AD109 WMT Orthopaedics Implants Hinge Toe Silastic flexible hinge toe HP100-G426 0, 1, 2, 3, 4, 5and Hammertoe Implant with grommets
PART A - Prostheses List by Category, Groups and Sponsor Page 435 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AD110 Wright Titanium Great Toe Great toe titanium 0,1, 2, 3, 4AD111 Conserve Plus Femoral Surface Cobalt chrome (CoCr) 32 - 66mm in 1mm increments
Replacement System
AD277 LPT Great Toe Implant Titanium LPT Metatarsal Component Sizes 1, 2 & 3 Regular Great Toe available in Regular and Angled Toe Implants. Sizes 1 & 2 Angled Great Toe
Biomet Australia Pty LtdBI021 Total Toe System Metatarsal Component UHMWPE, Titanium Small, Medium, Large Extra Large.BI022 Toe Joint Replacement Phalangeal Component, Titanium Small, Medium, Large Extra Large.
De Puy AustraliaDP883 Barouk SCR Sys Staples and Buttons Barouk Screw System Button Prosthesis 8-20mm
- SS or Ceramic
Global Scientific Pty LtdGS152 Toefit - Plus Titanium alloy Metatarsal Component XS-LGS153 Toefit - Plus Titanium Alloy Phalangeal Component XS-LGS208 Toefit - Plus Chromium Cobalt Distal Insert 13 - 17mmGS209 Toefit - Plus Polyethylene Polyethylene Distal Insert 11 - 15mmGS210 Toefit - Plus Chromium Cobalt Proximal Insert 6, 7, 8
Surgical HouseSU129 Reflexion 1st MPJ Implant System Reflexion metatarsal stems, 3 part 1st Small, medium, large
MPJ reconstruction system, 2 part composition - titanium/cobalt chrome, 1 part composition - titanium/UHMWPE,
SU130 Reflexion 1st MPJ Implant System Reflexion metatarsal heads, 3 part 1st Standard, long, extra-longMPJ reconstruction system, 2 part composition - titanium/cobalt chrome, 1 part composition - titanium/UHMWPE,
SU131 Reflexion 1st MPJ Implant System ReflexionPhalangeal Bases, 3 part 1st Small, medium, largeMPJ reconstruction system, 2 part composition - titanium/cobalt chrome, 1 part composition - titanium/UHMWPE,
Taylor Bryant Pty LtdTB145 Great Toe M-P Joint Metallic Hemiarthroplasty resurfacing Small 17mm, medium 20mm, large
prostheses for the hallux metatarsophalangeal joint
PART A - Prostheses List by Category, Groups and Sponsor Page 436 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TB232 Toe Joint Metallic Hemiarthroplasty resurfacing 8mm, 8.75mm, 9.5mm, 10.25mm, prosthesis for the Hallux 11mm, 11.75mm, 12.5mm, 13.25mm, Metatarsophalangeal Joint
Prostheses, Joint, Wrist
Advanced Surgical TechnologiesAD160 WMT Orthopaedic Implants Radial/Ulna Radial head implant HP silastic 1, 1.5, 2, 2.5, 3
Head
AD161 WMT Orthopaedic Implants Radial/Ulna Radial head titanium 1, 1.5, 2, 2.5, 3Head
AD162 WMT Orthopaedic Implants Radial/Ulna Ulna head titanium 1, 1.5, 2, 2.5, 3Head
AD211 SWANSON II Wrist Joint Implant Silicone Intermedullary Stemmed Implant 1, 2, 3, 4, 5- Titanium Grommet Optional
De Puy AustraliaDP127 Biax Wrist Biax Wrist STD and Long Small - Large
LMT Surgical Pty LtdLM010 Universal Total Wrist Implant System Consists of 3 parts, proximal radius Radial Component - Small - left & right,
component made of cobalt/chrome, distal Medium - left & right, Large - left & titanium plate, titanium screws and right; Carpal Component - Small, polyethylene joint surface Medium, Large; Polyethylene Carpal
Component - Small - Standard, +1, +2, Medium - Standard, +1, +2, Large - Standard, +1, +2; Bone Screws - 4.5mm
Medtel Australia Pty LtdME129 Nex-Link Spinal Fixation System, Spinal Rod 120 & 240mm
Plus OrthopaedicsPL002 BioProfile Pyrocarbon Carpal Includes: Proximal Scaphoid; Scapho- One Size Only
Trapezium; Resurfacing Capitate & Trapezium Interposition Implants. Composition: Pyrolitic Carbon
PART A - Prostheses List by Category, Groups and Sponsor Page 437 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Leg
Biomet Australia Pty LtdBI166 Compress Finn Limb Salvage System Distal Femoral Replacement: Anchor 15 plugs, 9 segments, 8 pins, 14 sleeves,
Plug, Femoral segment, transverse pins, 26 spindlescentering sleeves, spindle. Chrome
De Puy AustraliaDY187 Limb Preservation System Proximal Femoral Body Component Neutral in Std, Trochanter body
Left/Right
DY188 Limb Preservation System Distal Femoral Replacement Component Extra smallLeft/Right
DY189 Limb Preservation System 2cm LPS Femoral Stem Cemented 11 mm diameter x 150 mm length - 17 mm diameter x 200 mm length
DY190 Limb Preservation System 2cm LPS Femoral Stem Porous Coated 12.5 mm diameter x 150 mm length - (Bowed) 18.5 mm diameter x 200 mm length
DY191 Limb Preservation System Total Femoral Segment Component 55 mm(Male/Male)
DY192 Limb Preservation System Segmental Component (Male/Female) 25 to 65mm LengthDY193 Limb Preservation System Standard Cemented Stem (straight) 9 mm diameter x 100 mm length - 17 mm
diameter x 125 mm length
DY194 Limb Preservation System Standard Porous Stem (straight) 10.5 mm diameter x 100 mm length - 18.5 mm diameter x 125 mm length
DY195 Limb Preservation System Tibial Replacement Component X-Sm - MedDY196 Limb Preservation System Tibial Hinge Insert X-Sm 12mm height - Med 31 mm heightDY217 Limb Preservation System Intercalary Segment Component 55mm
(Male/Female)
DY425 Limb Preservation System Segmental Component (Male/Female) 85 to 125mm lengthDY426 Limb Preservation System Proximal Femoral Body Component 15 degrees Std, Trochanter body
Left/Right
Howmedica IncorporatedHW110 Howmedica Modular Resection System Total Knee Reconstruction 120mm, 140mm, 160mmHW188 Howmedica Modular Resection System Growing Prosthesis - Vitallium Expandable prostheses - Custom made to
child
PART A - Prostheses List by Category, Groups and Sponsor Page 438 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW189 Howmedica Modular Resection System Femoral Head - Vitallium 32mm in short, medium, long and 22mm, 26mm standard
HW190 Howmedica Modular Resection System Femoral Head 26mm - Vitallium 26mmHW191 Howmedica Modular Resection System Proximal Femur - Vitallium 120, 140, 160mmHW192 Howmedica Modular Resection System Hex Screw - Vitallium 16-30mm in 2mm increments and 35-
70mm in 5m increments
HW193 Howmedica Modular Resection System Distal Femur - Vitallium 120, 140, 160mmHW194 Howmedica Modular Resection System Femoral Joint - Vitallium One size onlyHW195 Howmedica Modular Resection System Plug Screw - Vitallium One size onlyHW196 Howmedica Modular Resection System Tibial Joint - Vitallium One size onlyHW197 Howmedica Modular Resection System Proximal Tibia - Vitallium 120mm, 140mm, 160mmHW198 Howmedica Modular Resection System Patella - Polyethylene Small, Medium, LargeHW199 Howmedica Modular Resection System Circlip - Vitallium One size onlyHW200 Howmedica Modular Resection System Plug Screw Axis - Vitallium One size onlyHW201 Howmedica Modular Resection System Axis - Vitallium One size onlyHW203 Howmedica Modular Resection System Bearing - Vitallium One size onlyHW204 Howmedica Modular Resection System Extension Piece - Vitallium 60mm, 80mm, 100mmHW205 Howmedica Modular Resection System Straight Anchorage Piece - Vitallium 11, 12, 13, 14, 15mmHW206 Howmedica Modular Resection System Curved Anchorage Piece - Vitallium 12, 13, 14, 15, 16, 17, 19mmHW207 Howmedica Modular Resection System Connecting Piece - Vitallium One size onlyHW208 Howmedica Modular Resection System Hex Socket Bolt - Vitallium One size onlyHW209 Howmedica Modular Resection System Screw Jack - Vitallium One size onlyHW210 Howmedica Modular Resection System Fixation Plate - Vitallium One size onlyHW211 Howmedica Modular Resection System Barr Bolt - Vitallium 51, 57, 64, 70, 76, 83mmHW212 Howmedica Modular Resection System Barr Bolt Nut - Vitallium 51, 57, 64, 70, 76, 83mmHW213 Howmedica Modular Resection System Humeral Bearing - Vitallium One size onlyHW214 Howmedica Modular Resection System Humeral Head Fixed - Vitallium One size onlyHW215 Howmedica Modular Resection System Humeral Head Rotating - Vitallium One size onlyHW216 Howmedica Modular Resection System Distal Humerus Cone - Vitallium One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 439 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW217 Howmedica Modular Resection System Distal Humerus Flange - Vitallium One size onlyHW218 Howmedica Modular Resection System Humerus Connection Piece - Vitallium One size onlyHW219 Howmedica Modular Resection System Humerus Connecting Screw - Vitallium One size onlyHW220 Howmedica Modular Resection System Humerus Hex Socket Bolt - Vitallium One size onlyHW221 Howmedica Modular Resection System Humerus Extension Piece - Vitallium 5, 15, 30, 45, 60, 75, 90, 105, 120, 135,
150, 165mm
HW222 Howmedica Modular Resection System Humeral Anchorage Piece - Vitallium 9, 10, 11, 12mmHW223 Howmedica Modular Resection System Ulna Joint - Vitallium One size onlyHW224 Howmedica Modular Resection System Humeral Axis - Vitallium One size onlyHW225 Howmedica Modular Resection System Revision Bushing - Vitallium One size onlyHW226 Howmedica Modular Resection System Revision Rings - Vitallium One size onlyHW227 Howmedica Modular Resection System Rotating Hinge Distal Femur - Vitallium 120, 140, 160mmHW228 Howmedica Modular Resection System Rotating Hinge Axle - Vitallium One size onlyHW229 Howmedica Modular Resection System Rotating Hinge Femoral Bushing - Vitallium One size onlyHW230 Howmedica Modular Resection System Rotating Hinge Bumper - Vitallium Insert 0degree, 3degree, 5degreeHW235 Howmedica Modular Resection System Duration Plug Screw Axis - Vitallium One size onlyHW236 Howmedica Modular Resection System Duration Femoral Bushing - Vitallium One size onlyHW237 Howmedica Modular Resection System Duration Tibial Insert - Polyethylene 6, 10, 14mmHW238 Howmedica Modular Resection System Duration Tibial Sleeve - Vitallium 10, 12, 13, 14, 15, 16, 17, 19mmHW239 Howmedica Modular Resection System Duration Bumper - Vitallium One size onlyHW240 Howmedica Modular Resection System Duration Wedge - Vitallium One size onlyHW241 Howmedica Modular Resection System Duration Bearing - Vitallium One size onlyHW242 Howmedica Modular Resection System Duration Fixation Plate - Vitallium One size onlyHW243 Howmedica Modular Resection System Duration Screw Jack - Vitallium One size onlyHW244 Howmedica Modular Resection System Oncology Proximal Femur - Vitallium 26mm, 28mm head with 70mm segmentHW245 Howmedica Modular Resection System Oncology Distal Femur Condyle - Vitallium Small, StandardHW246 Howmedica Modular Resection System Oncology Femoral Body - Titanium Standard Diametre 40-220mm in 20mm
increments and small diameter 40-160mm in 20mm increments
PART A - Prostheses List by Category, Groups and Sponsor Page 440 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
HW247 Howmedica Modular Resection System Oncology Femoral Stem - Vitallium 127mm and 203mm length 11, 13, 15, 17mm diameter
HW249 Howmedica Modular Resection System Oncology Proximal Tibia - Vitallium 95mm segmentHW250 Howmedica Modular Resection System Oncology Tibial Stem - Vitallium 127mm in 9, 11, 13mm diameterHW251 Howmedica Modular Resection System Oncology Tibial Insert - Polyethylene Small and Medium in 11, 13, 16, 21mmHW252 Howmedica Modular Resection System Oncology Duration Tibial Insert - Small and Medium in 11, 13, 16, 21mm
Polyethylene
HW253 Howmedica Modular Resection System Oncology Duration Tibial Plug - One size onlyHW254 HMRS Oncology Humeral Head/Cap Cobalt Chromium 40, 44mm, CapHW255 Howmedica Modular Resection System Oncology Humeral Body - Titanium 40 - 140mm in 20mm incrementsHW256 HMRS Oncology Humeral Stem Cobalt Chromium 7x75mm, 7x115mm, 9x75mm,
9x115mm, 11x115mm, 25mmx75mm, 25mmx100mm, 50mmx75mm, 50mmx100mm,75mmx100mm, 100mmx50mm
Stryker Australia Pty LtdSK160 Howmedica Modular Resection System GMRS (HMRS+) Straight Anchorage 11, 12, 13, 14, 15mm
Stems, Cobalt Chrome
SK163 Howmedica Modular Resection System GMRS Adaptors for Restoration (inc Standard, +10mm, +20mm, 30mmlocking bolt), Titanium/Cobalt Chrome
SK165 Howmedica Modular Resection System GMRS Press fit stems straight 11, 12, 13, 14, 15, 16, 17, 18, 19mmSK167 Howmedica Modular Resection System GMRS Press fit stems short bowed 150mm 11, 12, 13, 14, 15, 16, 17, 18, 19mmSK172 Howmedica Modular Resection System GMRS Adaptors Male/Female Taper, Male Taper; Female Taper
Titanium/Forged Cobalt Chrome
Prostheses, Ligament
Corin Australia Pty LtdCR032 Lars Ligamanet Augmentation Woven polyester prosthetic ligaments 60,80,100 & y shaped fibres
reconstruction system
National Surgical Corporation Pty LtdNI147 Endoflip Anchor for ACL reconstruction One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 441 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Surgical HouseSU059 ABC Prosthetic Ligament Cruciate prosthesis carbon 12.5cm-18.5cm; ABC Carbon Polyester
fibre/polyester, ABC Carbon/Polyester & ABC Polyester/Polyester - One size Medial/Lateral Collateral Ligament, ABC Polyester/ Polyester Medial/Lateral
SU060 Surgicraft Cruciate augmentation device 15-25cmSU061 Surgicraft Repair tow 100cmSU062 Surgicraft Fixation bollard One size onlySU063 Surgicraft Eyelett washer for synthetic ligament One size onlySU064 Surgicraft Mayday Soffix ACL repair polyester 15.5, 17.0, 18.5cm
ZimmerZI182 Zimmer Internal Fixation Systems: Soft Statak/Mini-Statak - Suture, Stainless 2, 5 mm - 5, 0mm
Tissue Re-attachment Device
Prostheses, Meningeal
W L Gore & AssociatesGT054 Preclude Spinal Membrane ePTFE 0.7mm Thickness 6 x 6cmGT055 Preclude Spinal Membrane ePTFE 0.7mm Thickness 6cm x 12cm
Prostheses, Radial Head
Advanced Surgical TechnologiesAD157 Radial Head Prostheses Titanium/UHMWPE Stem 6.5 and 8mm Mod head size 19 and
22mm
Corin Australia Pty LtdCR002 Corifix Radial Head Implant Cobalt chrome Small - Large
Howmedica IncorporatedHW381 Radial Head Prostheses Radial Head - Small, Medium, Large 8 - 15mm
Link Orthopaedic AustraliaLO007 Distal Radius Head Replacement - Small, medium & large
PART A - Prostheses List by Category, Groups and Sponsor Page 442 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tornier Pty LtdTO005 Radial Head Prostheses Ti CoCr, Elbow prostheses, consists of Stem 6.5mm & 8mm Mod Head size
Radial Stem + Cup. 19mm & 22mm
Prostheses, Radial/Ulna Head
Advanced Surgical TechnologiesAD105 Evolve Modular Radial Head Cobalt chromium alloy, 75 different Stem 5.5 - 9.5mm, head 20 - 28mm
combinations, 5 stem sizes, 15 head sizes
Medical & Optical Instruments Australia Pty LtdMO145 Martin Ulna Head prosthesis Stem Titanium Small, medium and large,2mm,4mm and
17mm collar
MO146 Martin Ulna Head prosthesis Ceramic Head, Chromium Cobalt Small, medium and large
Taylor Bryant Pty LtdTB204 Ulnar Head/Radial Head Implants Ulna Head - CoCr Stem: 2,3,4 Head: 2,3,4TB205 Ulnar Head/Radial Head Implants Radial/RECON RHead - CoCr Stem: 2,3,4 Head: 2,3,4,4N
Prostheses, Soft Tissue
De Puy AustraliaDY136 Restore Orthobiologic Soft Tissue Restore Patch One size only
Prostheses, Tendon
Surgical HouseSU055 Gateshead rod (Arthrotomy set) -pack of 3 Cartilage repair-carbon fibre implant 3 x 12.5mmSU056 Gateshead rod (Arthrotomy set) -pack of 5 Cartilage repair-carbon fibre implant 3 x 12.5mmSU151 Medicarb Gateshead Mini-rods Carbon fibre Dia 3mm, length 5mm (pack of 3)
PART A - Prostheses List by Category, Groups and Sponsor Page 443 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Tibial
Link Orthopaedic AustraliaLO006 Revision Tibial Component - Extra small, small, medium, large and
extra large
Prosthesis
Orthotech Pty LtdOH172 Tenolig Percutaneous Achilles Tendon Repair Diameter .85 mm - Length 33 cm
Prosthesis, Internal, Hip, Joint, Total
De Puy AustraliaDY329 ASR Hip System Large Modular Head Adaptor / Sleeve 9/10 or 11/13 or 12/14 taper
Prosthesis, Internal, Joint, Ankle, Total
LMT Surgical Pty LtdLM044 KMI Total Ankle Replacement The ankle is a three component system Small, Small +, Medium, Medium +,
consisting of a CoCr with titanium plasma Large, Large + spray (TPS) talus component and tibia component and a bearing component made of untra high molecular weight polyethylene (UHMWPE).
Prosthesis, Internal, Joint, Digit
De Puy AustraliaDY410 Hand and Foot Fracture Systems FRST wist off screw 11 to 14mmDY411 Hand and Foot Fracture Systems FRSStandard Staple, Straight 8 to 10mm
PART A - Prostheses List by Category, Groups and Sponsor Page 444 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DY412 Hand and Foot Fracture Systems FRS Screw 10mm to 34mm L x 2.5mm DiameterDY413 Hand and Foot Fracture Systems FRS .S.O.C Pin 9 to 40 mm Thread Length
Device Technologies Australia Pty LtdDE232 MCP Finger Prosthesis "Ariadna" Distal part, Stainless Steel 1, 2 or 3 Temporary approval,
pending review of product group
DE233 PIP Finger Prosthesis "DGT" Proximal part, Stainless Steel textured in 1,2 or 3 Temporary approval, Cobalt Chrome pending review of
product group
DE234 MCP Finger Prosthesis "Ariadna" Proximal part, Stainless Steel 1, 2 or 3 Temporary approval, pending review of product group
DE237 Trapezio Metacarpal Prosthesis DLC Stem - Cobalt Chrome 1 or 2 Temporary Approval, pending review of product group
DE239 Elektra Stem Cobalt Chromium/Hydroxyapatite coated 6-8mm Temporary Approval, pending review of product group
DE240 Elektra Neck Cobalt Chromium Extra short, short, medium, long Temporary Approval, pending review of product group
DE242 Trapezio Metacarpal Prosthesis DLC Cup, polyethylene One size only Temporary Approval, pending review of product group
DE243 Trapezio Metacarpal Prosthesis DLC Neck - Cobalt Chrome short, medium or long Temporary Approval, pending review of product group
DE248 PIP Finger Prosthesis "DGT" Distal part, Stainless Steel textured with 1, 2 or 3 Temporary approval, Cobalt Chrome pending review of
product group
DE250 Elektra Cup Cobalt Chromium and Hydroxyapatite One size only Temporary approval, Coating pending review of
product group
LMT Surgical Pty LtdLM015 Kinetik Great Toe Implant Phalangeal Component made of titanium 0,1,2,3
alloy 01-2010, 01-2012, 01-2014, 01-
PART A - Prostheses List by Category, Groups and Sponsor Page 445 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LM016 Kinetik Great Toe Implant Metatarsal Component made of chrome 1, 2, 3 Right & Leftcobalt 01-2002, 01-2004, 01-2006, 01-2003, 01-2005, 01-2007
LM018 Ascension Silicone MCP Replacement MCP - Injection - Moulded Medical Size 10, 20, 30, 40, 50Grade Silicone Elastomer; SMCP-500-10, 20, 30, 40, 50
LM028 Ascension Pyrocarbon CMC Finger Pyrocarbon layer encasing a graphite 10 - 40LM031 K2 Hemi Toe Implant System Cobalt Chrome with Titanium plasma 1-4
Orthotech Pty LtdOH202 Daphne Metacarpophalangeal Joint Prosthesis 3, 4, 5, 6
Taylor Bryant Pty LtdTB257 Avanta - Preflex MCP Finger Joint Implant 00/10/20/30/40/50/60mm
TiMax Surgical Pty LtdTI072 Futura Toe Implants Classic Great Toe, Flexible Digital, Lesser 5, 10, 15, 20, 30, 40, 50, 60
Metatarsal Phalangeal - UltraSIL
TI073 Futura Metal Hemi Toe Implants Hemi Toe Implant - Cobalt chrome 20, 30, 40TI074 Futura Flexible Great Toe Implants Primus Flexible Toe Implant - UltraSIL 20, 30, 40, 50
Prosthesis, Internal, Joint, Elbow, Humeral Component
Tornier Pty LtdTO012 Tornier Latitude Total Elbow Prosthesis Humeral Spool, Humeral Stem, Ulnar Humeral Spool - (Small, Medium, Large)
(Anterior, Posterior, Centered) (Left, Right); Humeral Stem - (Small, Medium, Large) (Left, Right); Ulnar Stem - (Small, Medium, Large) (Left, Right)
Prosthesis, Internal, Joint, Elbow, Radial Component
De Puy AustraliaDY414 Guepar Radial Implants Radial Stem, Radial Head +0 to+4DY415 Guepar Radial Implants Radial Stem, Radial Head 14/12mm to 16/16mm
PART A - Prostheses List by Category, Groups and Sponsor Page 446 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tornier Pty LtdTO014 Tornier Latitude Total Elbow Prosthesis Radial Head, Radial Stem Radial Head - (Small, Medium, Large);
Radial Stem - (Diameter - 5mm, 6.5mm)
Prosthesis, Internal, Joint, Hip, Acetabular Component
Global Manufacturing Technology Pty LimitedGM023 Cer-Met Series II (Acetabular Component) 6.5mm Ti Cancellous Bone Screws 15mm to 50mm
Prosthesis, Internal, Joint, Hip, Hemi
Taylor Bryant Pty LtdTB309 HemiCAP Contoured Articular Fixation Screw - Titanium Fixation component for 25mm and 30mm $0.00 $0.00
Resurfacing Hip System Artuclar Components Screw 10.5mm Dia & 12.5mm Dia
Prosthesis, Internal, Joint, Knee, Total
B Braun Australia Pty LtdBB210 Columbus TKS Obturator - Extension Stem Small & Large D12 to 14BB241 End cap Modular tibial component 12mm, 14mmBB242 Extension stem Modular tibial component 12mm, 14mm, short and long
Endotec Australia Pty LtdEA024 Buechel-Pappas Ultracoat Total Knee Ceramic Coated, Titanium Femoral and BP Rebar Screws 20mm -50mm (inc)
Replacement System (Primary and Tibial components with mobile polyethelene inserts all polyethelene patella ceramic coated, titanium backed
Prosthesis, Internal, Joint, Knee, Unicondylar
B Braun Australia Pty LtdBB199 Emotion TKS Articulating surface-posterior stabilized T1 to T8 Sizes: 10 to 24mm
PART A - Prostheses List by Category, Groups and Sponsor Page 447 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB200 Emotion TKS Extension Shaft Short, D: 10 to 20 , Medium, D: 10 to 20, Long, D: 10 to 20
Prosthesis, Internal, Joint, Shoulder, Glenoid Component
Tornier Pty LtdTO015 Aequalis Pegged Glenoid USA Pegged Glenoid Polyethylene (UHMWPE) Small, Medium, Large, Extra Large
Prosthesis, Internal, Joint, Shoulder, Humeral Component
LMT Surgical Pty LtdLM045 Epoca Resurfacing Head The humeral head surface replacement is Diameter 40 - 54mm
designed to replace the humeral articulating surface and is chrome cobalt with hydroxyapatite coating underneath
Taylor Bryant Pty LtdTB306 HemiCAP Contoured Articular Articular Component - Chrome Cobalt Articular Component 25mm - 3.0mm x $0.00 $0.00
Resurfacing Shoulder System 3.0mm to 5.0mm x 5.0mm offset; Articular Component 30mm - 5.0mm x 5.0mm to 7.0mm x 7.0mm offset
TB307 HemiCAP Contoured Articular Fixation Screw - Titanium Fixation component for 25mm and 30mm $0.00 $0.00Resurfacing Shoulder System Artuclar Components Screw 10.5mm
Dia & 12.5mm Dia
Prosthesis, Internal, Joint, Shoulder, Total
Biomet Australia Pty LtdBI884 Comprehensive Fracture Stem Fracture Stem Cobalt Chrome, Titanium 4,6,8,10,12,14mm
De Puy AustraliaDY416 Total Shoulder System Global CAP Conserv Head PC, Global 40 x 15 to 56 x 21
CAP Conserv Head HA
DY417 Total Shoulder System Global CAP Conserv Head PC, Global 40 x 15 to 56 x 21CAP Conserv Head Porous Coated
PART A - Prostheses List by Category, Groups and Sponsor Page 448 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Global Manufacturing Technology Pty LimitedGM002 Lobe Lok System Bone Screw 4 x 15mm to 4 x 30mm Temporary approval,
pending review of application in August 2005
GM003 Lobe Lok System Glenoid small to large Temporary approval, pending review of application in August 2005
GM004 Lobe Lok System Humeral Coupling single size Temporary approval, pending review of application in August 2005
GM005 Lobe Lok System Humeral Head - Ceramic 40 to 56mm Temporary approval, pending review of application in August 2005
GM006 Lobe Lok System Humeral Head - CoCr 42 to 54mm Temporary approval, pending review of application in August 2005
GM007 Lobe Lok system Humeral stem 135 to 155mm Temporary approval, pending review of application in August 2005
GM028 Lobe Lok System Neck Extension 126 to 135 Temporary approval, pending review of application in August 2005
GM030 Lobe Lok System A/P insert with locking screw Size 1 to 3 Temporary approval, pending review of application in August 2005
LMT Surgical Pty LtdLM020 Epoca Custom Offset Shoulder Epoca Stem 6 - 14mm, Length: 115 - 215mmLM021 Epoca Custom Offset Shoulder Epoca ZF Cementless Stem 6 - 14mm, Length: 115 - 135mmLM022 Epoca Custom Offset Shoulder Epoca Head 40 - 54mm, Height: 15 - 20.25mmLM023 Epoca Custom Offset Shoulder Epoca Eccenter One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 449 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LM024 Epoca Custom Offset Shoulder Epoca Glenoid 40mm - 54mmLM025 Epoca Custom Offset Shoulder Epoca Glenoid Shell Screw 10; 15; 20mmLM026 Epoca Custom Offset Shoulder Epoca Reco Glenoid 42 - 52mmLM027 Epoca Custom Offset Shoulder Epoca Glenoid Insert 42 - 54mm
ZimmerZI326 Bigliani/Flatow Trabecular Metal Humeral Porous Tantulum Humeral Stem 6mm-19mm diameter
Shoulder
Prosthesis, Internal, Joint, Wrist, Total
Taylor Bryant Pty LtdTB253 Avanta - Total Wrist Implant System Left and Right Radial Components Small, Medium, LargeTB254 Avanta - Total Wrist Implant System Carpal Screws 15, 18, 22, 26, 30mmTB255 Avanta - Total Wrist Implant System Carpal Ball Small, Medium, LargeTB256 Avanta - Total Wrist Implant System Carpal Component Small, Medium, Large
Prosthesis, Internal, Knee, Tibial Component
ZimmerZI485 Trabecular Metal Cone Trabecular Metal Tibial void filling cone Full and Stepped Cone
Prosthesis, Internal, Ligament, Anchor
Device Technologies Australia Pty LtdDE220 Bio-Suturetak PLDLA Bioabsorbable Suture Anchor Diameter 3mm, Length 14.5mm
TiMax Surgical Pty LtdTI091 AutoCuff System - Suture Cartridge SmartStitch Suture Cartridge Number 2 braided polyester $0.00 $0.00TI092 AutoCuff System Magnum Knotless Implant - w/ inserter One Size Only $0.00 $0.00
PART A - Prostheses List by Category, Groups and Sponsor Page 450 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prosthesis, Internal, Radial Head
Advanced Surgical TechnologiesAD272 Evolve Radial Head Plate Evolve Radial Plate System Stainless Steel 32mm x 20 - 26mm in 2mm incrementsAD273 Evolve Radial Head Plate Evolve Radial Plate System Stainless Steel 37mm x 20 - 26mm in 2mm incrementsAD274 Evolve Locking Cancellous Bone Screws The Evolve stainless steel locking screw 2.0mm x 14 - 28mm
LMT Surgical Pty LtdLM019 Ascension Radial Head Pyrocarbon Radial Head 20, 22, 24, RH-300-20; RH-300-22; RH-
300-24
LM035 Katalyst Anatomic Bipolar Radial Head The Katalyst is a radial head prosthesis Radial Head sizes 16mm - 26mmconsisting of cobalt chrome, U.H.M.W. Pe and Stainless Steel Components
LM036 Katalyst Anatomic Bipolar Radial Head The Katalyst is a radial head prosthesis Shaft/Stem Assembly Sizes 20 - 30mmconsisting of cobalt chrome, U.H.M.W. Pe and Stainless Steel Components
LM043 Ascension Radial Head The Ascension Radial Head is modular Head Size - 20 Short and Long, 22 Short with a Pyrocarbon Head and Metal Stem and Long, 24 Short and Long; Stem Size which is made of Cobalt Chromium Alloy - 01/02/03/04 compliant with ASTM F1537-00
Plus OrthopaedicsPL001 BioProfile Modular Pyrocarbon Radial- A Modular Titanium/Pyrocarbon Radial- One Size Only
Head Prosthesis which includes a stem, neck, head and expansion screw.
Prosthesis, Internal, Spine, Cage
Mathys AustraliaMA432 Cervios IBF Cage Interbody Fusion Cage Height 5-10mm (1mm increments)MA433 Plivios IBF Cage Interbody Fusion Cage Height 7-17mmMA434 Trafios IBF Cage Interbody Fusion Cage Height 7-17mm
Medtel Australia Pty LtdME117 Cadence (non sterile) Titanium Interbody Implant 9-15mm
PART A - Prostheses List by Category, Groups and Sponsor Page 451 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME118 Cadence Peek - Optima (sterile) Vue Radiolucent Implant 9-13mmME119 Fortitude (non sterile) Titanium Interbody Implant 12mmME120 Fortitude Peek-Optima (sterile) Vue Radiolucent Implant 12mmME121 Traxis (non sterile) Titanium Interbody Implant 9-13mmME122 Traxis Peek-Optima (sterile) Vue Radiolucent Implant 12mm
Stryker Australia Pty LtdSK338 VBOSS Titanium 10 (60); 12 (8, 9, 10, 11, 12, 40, 80); 14
(8, 9, 10, 11, 12, 40, 80); 16 (40, 80); 20 (40, 80, 120); 25 (40, 80, 120)
Taylor Bryant Pty LtdTB298 MC+ Implants Intersomatic cages (Open and 'Closed), 12mm x 14mm - 15mm x 17mm
Anchoring clip
TB299 Roi Implants Intersomatic Lumbar cages 20mm x 7mm - 24mm x 15mm
Prosthesis, Internal, Spine, Disc
Taylor Bryant Pty LtdTB292 Prodisc C Composition - Titanium M/MD/L/LD/XL/XLD, heigth 5/6/7mm
Prosthesis, Internal, Spine, Vertebral Body
Device Technologies Australia Pty LtdDE226 B-Twin Vertebral Body Reconstruction Titanium, locking ring Nitinol Diameter - 11.5/13 - 15.5/17, length 25 -
System 27mm
Medtronic Australasia Pty LtdMC297 Verte-Stack Boomerang Width 25 - 36 mm, Height 6 - 18 mm
Orthotech Pty LtdOH193 EBI Ionic Spine Spacer Titanium alloy 9 - 19mm
Taylor Bryant Pty LtdTB252 Signus - Semial Composition - PEEK Height (ant) 7.80, 10.40, 13.20; Diameter
38, 43, 48; Height (post) 5.4, 8.0, 8.1, 10.8; Angle 5.00, 10.40
PART A - Prostheses List by Category, Groups and Sponsor Page 452 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prosthesis, Internal, Tendon
Surgical HouseSU174 SEM Rotator Cuff Tendon and Prosthesis Polyester 1, 2, 3, 4
for Tenoplasty
Restrictors, Orthopedic Cement
Advanced Surgical TechnologiesAD178 Bone Plug PMMA Cement 8, 10, 12, 14, 16mm
De Puy AustraliaDP233 Hardinge Cement Restrictor Hardinge cement Restrictor (ea) One size onlyDP448 BIO Stop G Biostop Restrictor (Gelatin, Glkycerol, size 8-20
PHBM, Water)
DP575 C-Stem End Cap End Cap Biostop Restrictor (Gelatin, Size 8- 20 Glycerol, PHBM, water)
Howmedica IncorporatedHW001 Hardinge Cement Restrictor PMMA 6,9 and 12 LeafHW002 Seidel Plugs Seidel Cement Restrictor - Polyethylene. 8, 10, 12, 14, 16, 18mm
Smith & Nephew Surgical Pty LtdSN263 Buck Cement Restrictor 18.5 - 35mmSN264 Buck IM Prep Kit One size onlySN712 Bio Buck Cement Restrictor Bioabsorbable 13mm - 35mm
Rods
Device Technologies Australia Pty LtdDE163 Bio-Post & Washers PLLA composition Implant 35mm - 50mm, Washers 16mm
Johnson & Johnson Medical Pty LtdJJ126 Contack Fastener Polylactic acid tack (3.5 to 7.5mm) x11.5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 453 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ307 Rapidloc Meniscal Repair PLA Tophat Composition: PLA Implant and Ethibond 2/0with Ethibond Suture Suture, non absorbable suture
JJ308 Rapidloc Meniscal Repair PLA Tophat Composition: PLA Implant and Panacryl Straight needle, 12 degree curved needle, with Panacryl Suture Suture 27 degree curved needle
Linvatec AustraliaLV049 Bionx Implants - Rods PLLA Mini Tack 1.1mmLV050 Bionx Implants - Rods PGA, PLA or PLLA 1.5mm x 10-70mmLV051 Bionx Implants - Rods PGA, PLA or PLLA 2.0mmLV052 Bionx Implants - Rods PGA, PLA or PLLA 3.2mm x 30-70mmLV063 Bionx Implants - rods PLLA (Smart Nail) 1.5mmLV084 SmartNail 2.4 Self-reinforced 96L / 4D PLA 16, 25, 35 & 45mm
ZimmerZI336 Polypin Resorbable Bone Pin Polylactide 1.5, 2.0, 2.7mm
Screws
Biomet Australia Pty LtdBI005 Re-Unite Orthopaedic System Rotator Cuff Butress, Lactosorb; PGA/PLA One size onlyBI012 Re-Unite Orthopaedic System Pop-Rivet - PGA/PLA One size onlyBI241 Gentle Threads Ligament Fixation Screws Screw, Graft Interference, PGA/PLA 7mm, 8mm, 9mm, 10mmBI278 Re-Unite Orthopaedic Screws Screw, PGA/PLA (2-5)mm dia x (5-70)mmBI279 Re-Unite Orthopaedic System Plates, PGA/PLA 4 - 7 holeBI808 Reunite Orthopaedic System Plate, dorsal or volar, PGA/PLA Dorsal - long, small; Volar - one size onlyBI822 Reunite Orthopaedic System Sheet, mesh panel PGA/PLA 50-75mm squareBI826 Meniscal Screw Screw PGA/PLA One size only
De Puy AustraliaDY321 Codman Anterior Cervical Plate System Rescue screw 12 & 15mm
Device Technologies Australia Pty LtdDE069 Interference Screws Bio-Cortical - PLA 8 x 17 - 11 x 17mm and 8 x 20 - 10 x DE072 Bio-Interference Screw PLA 7mm - 9mm
PART A - Prostheses List by Category, Groups and Sponsor Page 454 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE075 Arthrex Headed Bio-absorbable PLA 8mmDE081 Tissue Tak PLDLA 3mm - 4.5mmDE125 Bio-Corkscrew Composition - polylactide, eyelet - 3.5-6.5mmDE166 Bio-Tenodesis Screw Composition PLLA Dia 5.5-9mmDE167 Bio-Interference Screw Composition - PLLA, delta tapered Dia6.5 - 10.5mm to 8 - 12mm x 28 -
35mm length
DE195 Bio Corkscrew With Fibrewire Suture 3.5mm - 6.5mmDE224 Retro Screw Composition PLLA 8-10mm x 20mm
Johnson & Johnson Medical Pty LtdJJ002 Meniscal Screw Bioabsorbable Poly Lactic AcidJJ073 Mitek Phantom Screw - Absorbable Polylactic acid Bioabsorbable Screw 7,8 & 9mm x (20 to 30mm)JJ127 Absolute Absorbable Interference Screw Polylactic acid screw 7 to11mm x (23 to 30mm)JJ337 Biocryl - TCP/PLA Interference Screw Composition - Tricalcium Phosphate & 7x23mm; 7x30mm; 8x23mm; 8x30mm,
Polylactic Acid 9x23mm; 9x30mm; 10x23mm; 10x30mm; 11x30mm
Linvatec AustraliaLV019 BioScrew Bioabsorbable Interference ACL Fixation - PLLA Diameter 7.0 - 9.0mm, Length 20 - LV021 BioStinger - V Bio - Absorbable Meniscal Meniscal Repair Device - PLLA 10mm - 16mm
Repair Device
LV022 EndoPearl Bio-Absorbable Implant - ACL ACL Fixation - PLLA 7mm - 9mmFixation
LV029 Bionx Implants - Screws Biocuff Polylactide copolymer Dia 5.7mm, length 18, 28, 36mmLV055 Bionx Implants - Screws PLA Full Thread 3.5mmLV056 Bionx Implants - Screws PLA Full Thread 4.5mmLV057 Bionx Implants - Screws PLA Cannulated 4.5mmLV058 Bionx Implants - Screws PLLA Lag Screw 3.5mm x 10-28mmLV059 Bionx Implants - Screws PLLA Lag Screw 3.5mm x 30-45mmLV060 Bionx Implants - Screws PLLA Lag Screw 4.5mm x 25-70mmLV061 Bionx Implants - Screws PLLA Lag Screw 6.3mm DiameterLV062 Bionx Implants - screws ACL PDLA Screws & Wedges Dia 5mm, 7mm, 8mm, 9mm
PART A - Prostheses List by Category, Groups and Sponsor Page 455 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LV064 Bionx Implants - screws PLLA Screws (Bankart Tack) 3.5mmLV065 Bionx Implants - screws PLLA Screws (Contour Labral Nail) 3.5mmLV066 Bionx Implants - screws Biofix PLA full threaded crosshead screw Dia 2mm, length 6 - 10mmLV067 Bionx Implants - screws Biofix PLA full threaded crosshead screw Dia 2mm, length 12 - 20mm; Dia 2.7mm,
length 6 -24mm
LV071 Contour Meniscus Arrow 80L/20D, LPLA & PLLA 1.1mm x 10, 13,16mmLV072 Contour Meniscus Arrow 80L/20D, LPLA, Pre-loaded Cartridge 1 1.1mm x 10, 13,16mmLV074 Contour Meniscus Arrow 80L/20D, LPLA, Pre-loaded Cartridge 3 1.1mm x 10, 13,16mmLV075 Bionix Screws Biocuff C PLA Screw 6.0mm OD x 28mm LONG; 6.0mm OD
x 36mm LONG
National Surgical Corporation Pty LtdNI148 Bilok Arthroscopic Screw Screw for graft fixation in ACL StandardNI149 Bilok Arthroscopic Screw Screw for graft fixation in ACL ST
Smith & Nephew Surgical Pty LtdSN004 Bioabsorbable screw BioRCI-HA Screw, Medial, Portal, 7 x 25mm - 10 x 35mm
Reverse thread, Tibial specific, Trans-
SN008 Rotorloc Absorbable PLA Suture Anchor - One size onlySystem
SN412 RotorLoC Suture Anchor System One size onlySN421 ACL/PCL Reconstructions Absorbable RCI (Bio RCI) 7-10mm diameter, 25-35mm lengthSN430 ACL/PCL Reconstructions EndoFix Bioabsorbable Screw 7 x 20mm - 9mm x30mmSN431 ACL/PCL Reconstructions EndoFix L 7, 8 & 9mm diameters, 20-30mm lengths
Stryker Australia Pty LtdSK392 Universal Distal Radius System Self Tapping cross Head Titanium Bone Sizes range from: 2.3mm x 10mm to
Screws 2.3mm x 38mm in 2 mm increments (Full Thread); 2.7mm x 10mm to 2.7mm x 26mm in 2mm increments (Full and
ZimmerZI447 Bioresorbable Screw Polylactide One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 456 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Screws, Bone
AustofixAX002 Austofix Intramedullary Screws Nail Locking Screw, stainless steel 3.5mm, 4.0mm & 4.5mmAX003 Austofix Intramedullary Screws Humeral Head Screw, stainless steel 4.3mmAX011 Austofix Intramedullary Screws F2 Locking Screw, stainless steel 5.5mm, 6.2mm, 6.5mmAX012 Austofix Intramedullary Screws Proximal Thread Locking Screw, 4.0mm & 4.5mm
stainless steel
Australian Surgical Design & Manufacture Pty LtdAE007 MF-Cortex Screw Titanium 1.0 - 2.7mm dia, length 2 - 40mmAE012 ASDM Bone Screw Titanium 2.0 - 6.5mm dia, length 4-150mmAE013 Shaft Screw, Pure Threaded Pin, Manufactured from pure 3.2 x 50 - 100mm, 4.0 x 70 - 110mm
Titanium
AE020 Cortex Screws Stainless Steel 1.5mm length 6-20mmAE021 Cortex Screw Stainless Steel 2.0mm length 6-38mmAE022 Cortex Screws Stainless Steel 2.7mm length 6-40mmAE023 Cortex Screws Stainless Steel 3.5mm length 10-110mmAE024 Small Cannulated Screws Short Thread Stainless Steel 3.5mm length 10-50mmAE025 Small Cannulated Screws Internally threaded, manufactured from 3.2 x 0 comp, 3.2 x 2 comp, 4.0 x 0
pure Titanium comp, 4.0 x 2 comp
AE026 Cancellous Bone Screws Fully Threaded Stainless Steel 4.0mm length 10-60mmAE027 Cancellous Bone Screws Short Thread Stainless Steel 4.0mm length 10-50mmAE028 Large Cannulated Screws Stainless Steel 16mm Thread 7.0mm dia, length 30-150mmAE029 Large Cannulated Screws Stainless Steel 32mm thread 7.0mm dia, length 45-150mmAE030 Large Cannulated Screws Fully Threaded Stainless steel 7.0mm dia, length 70-100mmAE031 Cortex Screw Stainless Steel 4.5mm length 14-140mmAE032 Malleolar Screws Stainless Steel 4.5mm length 25-70mmAE033 Cancellous Bone Screws Threaded Stainless Steel 16mm Thread 6.5mm dia, length 30-120mm AE034 Cancellous Bone Screws Threaded Stainless Steel 32mm thread 6.5mm dia, length 45-150mm
PART A - Prostheses List by Category, Groups and Sponsor Page 457 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AE035 Cancellous Bone Screws Fully Threaded Stainless Steel 6.5mm dia, length 20-110mmAE051 ASDM Bone screw Titanium Dia 7 - 9 mm, length 20 - 40mm
B Braun Australia Pty LtdBB051 BRAUN AUST Intramedullary Nails Compression Nail 100mmx10.5mm-610mmx12.5mmBB052 BRAUN AUST Intramedullary Nails Compression Screw 4.5mmx64mm-4.5mmx102mmBB056 BRAUN AUST Intramedullary Nails Fixation Screws Dia 4.5mm-6mm,Length 20mm-96mmBB057 BRAUN AUST Intramedullary Nails Closure Screws Length 8mm-10mmBB059 BRAUN AUST Intramedullary Nails Huckstep Fine Thread Screw 4.5mmx19mm-4.5mmx57mmBB158 Advanced Biomechanical Concept Screw Titanium with locking mechanism Dia 4 - 4.5mm, length 10 - 28mmBB159 Bone Screw MACS Polyaxial & Stabilisation, Titanium Dia 6.5 - 7mm, length 30 - 50mmBB160 Bone Screw HMA Polyaxial, Titanium Dia 12mm, length 26 - 38mmBB161 Bone Screw HMA Monoaxial, Titanium Dia 12mm, length 26 - 38mmBB162 Bone Screw MACS Locking, Titanium Dia 12mm, length 4mmBB163 Bone Screw MACS Graft, Titanium Dia 5mm, length 35mmBB174 MACS TL Bone Screws Polyaxial screw - XL 30mm and 40mm
Biomet Australia Pty LtdBI143 Compression Screw Set Supracondylar Plate, Stainless Steel 6-14 holeBI309 Compression Hip Screw Plate, Titanium 2-14 hole x 53-257mmBI311 Compression Hip Screw Support Screw, Titanium, Stainless Steel 4.5 - 6.5 x (14-70mm)BI312 Compression Hip Screw Lag Screw, Titanium, Stainless Steel 12.7, 15mm x (55-150mm)BI313 Cannulated Screws Fixator, Ulson, Complete Stainless Steel 25mm x 135-200mmBI314 Cannulated Screws Fixator, Ulson, Clamp Assembly One size onlyBI315 Compression Hip Screw Plate, Stainless Steel 25-38mm x 2-7 hole for use with plate
size 50-150mm
BI316 Compression Hip Screw Plate, Stainless Steel 25-38mm x 8-14 hole for use with plate size 50-150mm
BI317 Compression Hip Screw Lag Screw, Stainless Steel 12.5,14mm x (50-150mm)BI318 Compression Hip Screw Cortical Screws Pk 10, Stainless Steel 2.7-4.5mm x (10-140mm)BI319 Compression Hip Screw Compression Screw 1.5-4.5 x (6-70mm)
PART A - Prostheses List by Category, Groups and Sponsor Page 458 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI321 Cannulated Screws (Various) Ulsan Fixator, Percutaneous Pins (Pair) 135, 200mmBI820 EBI XFIX DynaFix System Screw, HA coated, cortical, cancellous Dia 2-6mm
Corin Australia Pty LtdCR031 Corifix Ligament Anchor Soft Screw Titanium rounded thread cannulated 7,8,9,10mm diam :20-35mm length
ligament screw
CR033 Corifix Bone Screw Titanium interforence screw for use with 7,8,9,mm diameter 25-30mmlengthabove L.A.D
CR034 Corifix Bone Screw Stainless steel - screw bone cannulated 3.5mm diam 20-60mm lengthCR035 CorifixCortical Screw Stainless steel screw 2.7mmD 6-40mm LCR036 Corifix Bone Screw Cancellous Bone Screw 4.0mmShort 10-55mm
Thread, Stainless Steel
CR037 Corifix Cortical Screw Stainless steel screw 4.5mmD 12-70mmLCR038 Corifix Cancellous Screw Cancellous Bone Screw 6.5mm, Full 10-55mm
Thread, Stainless Steel
CR049 Corifix Bone Screw Cannulated Bone Screw 7.0mm Long 35-130mmThread, Stainless Steel
CR050 Corifix Bone Screws Cancellous Bone Screw 4.0mm Full 10-26mmThread, Stainless Steel
CR051 Corifix Bone Screws Cancellous Bone Screw 6.5mm Long 25 -105mm lengthThread, Stainless Steel
De Puy AustraliaDP040 Bone Screw Screw Cancellous Titanium Dia 3.5 or 5 or 6.5 or 7mm length 15 -DP042 Chandler Plate Tibial Osteotomy Plate -Stainless Steel 50-70mmDP043 Chandler Plate Self Tap Screw 4.5mm Length -Stainless 60-100mmDP868 Barouk Screw System Barouk Screw - Titanium 10-34mm LengthDP882 Twistoff Screw TwistOff Screw Titanium 11-14mm LongDP894 Rockwood Shoulder Screw Rockwood Shoulder Screw S/S One size onlyDP895 Rockwood Shoulder Screw Rockwood Shoulder washer S/S One size onlyDP896 AC Percu Screw AC Percu screw S/S Size 32-52mmDP897 AC Percu Screw AC Percu Screw Washer S/S One size onlyDP900 Albizza Nail Albizza Nail - Stainless Steel 240-320mm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 459 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP901 Albizza Nail Albizza Nail Cotter Screw 3.5 or 4.5 0r 5.5 mm 25-75 mm lengthDY074 Codman Anterior Cervical Plate System Cancellous Bone Screw - Standard/Self 10 - 26mm
Tapping/Variable Depth
Device Technologies Australia Pty LtdDE060 Avulsion Screw Titanium 45mmDE067 Interference Screws ARTHREX Sheathed 7 x 23mm - 12 x 23mmDE068 Interference Screws ARTHREX Non-sheathed 7 x 28mm - 12 x 28mmDE077 Cancellous Bone Screws Low Profile 30mm - 40mmDE128 Cortical Screw Self locking screws, cancellous and Diameter 3.5-6mm, length 10-110mm
Dj Orthopaedics Pty LtdDJ001 ACL Bone Screws - Dia 5 - 10mm, length 20 - 50mm
Howmedica IncorporatedHW295 Asnis Guided Screw System Screw, Stainless Steel 35-130mmHW296 Asnis Guided Screw System Screw - Titanium 4, 5, 6.5,8mmHW297 Asnis Guided Screw System Guide Pin, Stainless Steel 1.4,2.0,3.2mmHW298 Asnis Guided Screw System Washer, Stainless Steel One size onlyHW299 Asnis Guided Screw System Washer - Titanium 4, 5, 6.5,8mmHW330 Omega Plus Compression Hip Screw Hip Sideplate - Standard Barrel - 2,3,4,5 hole 130-150 degrees
Stainless Steel
HW331 Omega Plus Compression Hip Screw Hip Sideplate - Short Barrel - Stainless 6,8,10,12 hole 130-150 degreesHW332 Omega Plus Compression Hip Screw Supracondylar Sideplate - Stainless Steel 6,8,10,12,14 holesHW333 Omega Plus Compression Hip Screw Lag Screw - Standard - Stainless Steel 50-130mm length HW334 Omega Plus Compression Hip Screw Lag Screw - Super - Stainless Steel 50-130mm length HW335 Omega Plus Compression Hip Screw Compression Screw - Stainless Steel 25mm lengthHW336 Omega Plus Compression Hip Screw Cortical - Stainless Steel 4.5mm diaHW337 Omega Plus Compression Hip Screw Cancellous - Stainless Steel 6.5mm dia
Johnson & Johnson Medical Pty LtdJJ071 Mitek Kurosaka Advantage Fixation Titanium Screw Cannulated - Advantage 7 & 9mm x (15 to 40mm)JJ072 Mitek Kurosaka Fixation Screw Titanium Screw Cannulated - Profile 7,8 & 9mm x (20 to 30mm)
PART A - Prostheses List by Category, Groups and Sponsor Page 460 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ079 Mitek Cancellous Screw Low Profile Titanium screw 4.5mm x (26 to 76mm)JJ080 Mitek Cancellous Screw Low Profile Titanium screw 6.5mm x (25 to 55mm)JJ125 Intrafix Tibial Tapered Screw Plastic tapered screw 6 to 10mm x (15 to 30mm)
Linvatec AustraliaLV009 Revo Cancellous Screw Soft Tissue Re-attachment - Titanium 4mm diameterLV010 Mini-Revo Screw Soft Tissue Re-attachment - Titanium 2.7mm diameterLV011 Soft Tissue Anchoring Implant - Spiked Soft Tissue Re-attachment - Titanium 1.3 x 14mm - 2.5 x 20mm
Washer
LV012 Soft Tissue Anchoring Implant - Flat Soft Tissue Re-attachment - Titanium 14, 17mmLV013 Soft Tissue Anchoring Implant - Cortical Soft Tissue Re-attachment - Titanium 30 - 80mm
Screw
LV014 Soft Tissue Anchoring Implant - Soft Tissue Re-attachment - Titanium 25 - 65mmCancellous Screw
LV016 Propel Interference Screws ACL Fixation - Titanium Diameter 7.0 - 9.0mm, Length 20 - LV017 Guardsman Femoral Interference Screws ACL Fixation - Titanium Diameter 7.0 - 9.0mm, Length 20 - LV018 Cannulated Interference Screws ACL Fixation - Titanium Diameter 7.0 - 9.0mm, Length 20 - LV077 BioScrew XtraLok Tibial Fixation Device PLLA Diameter 9, 10, 11mm; Length 35, 40mm
Mathys AustraliaMA032 RM Cup Screws Titanium 4 x 22mm - 4 x 48mmMA082 AO/ASIF Screws Mini cannulated screw 3.0mm dia / 8 - 40mm lengthMA083 AO/ASIF Screws Plate pin 1.8mm buttress pin 12 - 30mmMA089 AO/ASIF Plates DHS/DCS lag screw 50-145mm LMA091 AO/ASIF Screws 2.4mm Self Tapping Screw 21.0-40.0mmMA092 AO/ASIF Screws 1.3mm Cortex and Self Tapping Screw 2.0 - 10.0mmMA118 AO/ASIF Screws 1.5mm Cortex Screws 2.0 - 20.0mmMA119 AO/ASIF Screws 2.0mm Cortex Screws 2.0 - 20.0mmMA120 AO/ASIF Screws 2.7mm Cortex Screws 4.0 - 20.0mmMA121 AO/ASIF Screws Steel Cortex screws 3.5mm dia /10 - 110mmMA122 AO/ASIF Screws Steel Cortex self tapping screws 3.5mm Dia / 10 - 130mm
PART A - Prostheses List by Category, Groups and Sponsor Page 461 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA123 AO/ASIF Screws Cancellous,- ligament, bunionectomy, full 4.0mm dia / 10 - 105mm & short thread
MA124 AO/ASIF Screws Malleolar Screws 46.0 - 80.0mmMA125 AO/ASIF Screws Steel Cortex self tapping screws 4.5mm dia / length 14 - 140mmMA126 AO/ASIF Screws 6.5mm Cancellous Screws 111.0 - 160.0mmMA127 AO/ASIF Screws Steel 3.5mm cannulated screws Short thread 10 - 50mm / full thread 10 -
50mm
MA128 AO/ASIF Screws Steel Cannulated screws 1/3 thread & long thread / 10 - 50mm /4.0mm cannulated
MA129 AO/ASIF Screws Steel 4.5mm cannulated screws Short thread, 1/3 thread, full thread / 20 - 72mm, 4.5mm cannulated
MA130 AO/ASIF Screws Steel 7mm cannulated screws 16, 32mm, & full thread / 30 - 150mm / 7.00 mm cannulated
MA131 AO/ASIF Screws Steel 7.35mm cannulated screws 16, 32mm, & full thread / 20 - 150mm / 7.3mm cannulated
MA132 AO/ASIF Screws Steel Cannulated implant Custom madeMA133 AO/ASIF Screws 1.0mm Cortex Screws 2.0 - 10.0mmMA134 AO/ASIF Screws Cortex screw 1.2mm dia / 2.0-20.0mm lengthMA135 AO/ASIF Screws Cortex screw 1.5mm dia / 2.0-40.0mm lengthMA136 AO/ASIF Screws Cortex screw - stardrive self drill & 1.7 - 2.0mm 3 - 60mm length
tapping, monocortical
MA137 AO/ASIF Screws 2.4mm Cortex Screw 4-140mm LMA138 AO/ASIF Screws Cortex screw - emergency, self tap 6 - 50mm length / 2.7mm diaMA139 AO/ASIF Screws Cortex screw - emergency 8 - 24mm length/ 3.2mm diaMA140 AO/ASIF Screws 3.5mm Cortex Screws 61.0 -130.0mmMA141 AO/ASIF Screws 3.5mm Cortex self tapping screws 8-140mm LMA142 AO/ASIF Screws 4.0mm Cancellous Screws 29.0 - 70.0mmMA143 AO/ASIF Screws 4.5mm Cortex Screws 91.0 - 150.0mmMA144 AO/ASIF Screws 4.5mm Cortex screws self tapping 10-140mm LMA145 AO/ASIF Screws 6.5mm cancellous screws 10-150mm LMA146 AO/ASIF Screws 3.5mm Cannulated screws 36-50mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 462 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA147 AO/ASIF Screws 4.0mm cannulated screws 8-100mm LMA148 AO/ASIF Screws 7.3mm cannulated screws 20-150mm LMA149 AO/ASIF Screws Cannulated special Custom madeMA186 AO/ASIF Plates - Steel DHS/DCS lag screws 12.5mm, length 50 - 145mmMA187 AO/ASIF Plates DHS/DCS compression screw 36mm lengthMA188 AO/ASIF Plates DHS/DCS locking device screw One size onlyMA207 AO/ASIF Intermedullary Nails Shaft screw 5.0mm , length 70 - 125mmMA229 Spinal Plate/Plate System AO/ASIF Spinal Cannulated/self tapping screw (odontoid) 3.5mm dia, 36-50mm length
Implants
MA291 Locking Head Screws Self drilling, Self Tapping, Sterile/Non Dia 3.5 - 5.0mm, length 10-100mmMA404 AO/ASIF Screws 3.5mm Cortex Screws 29.0 - 60.0mmMA405 AO/ASIF Screws 3.5mm Cortex Screws 10.0-28.0mmMA406 AO/ASIF Screws Malleolar Screws 20.0 - 45.0mmMA407 AO/ASIF Screws 4.5mm Cortex Screws 10.0 - 46.0mmMA408 AO/ASIF Screws 4.5mm Cortex Screws 47.0 - 90.0mmMA409 AO/ASIF Screws 6.5mm Cancellous Screws 20.0 - 65mmMA410 AO/ASIF Screws 6.5mm Cancellous Screws 66.0 - 110.0mmMA411 AO/ASIF Screws 4.0mm Cancellous Screws 10.0 - 28.0mmMA412 AO/ASIF Screws 2.4mm Self Tapping Screw 4.0 - 20.0mmMA413 AO/ASIF Screws 1.3mm Cortex and Self Tapping Screw 11.0 - 20.0mmMA414 AO/ASIF Screws 1.5mm Cortex Screw 21.0 - 40.0mmMA415 AO/ASIF Screws 2.0mm Cortex Screw 21.0 - 40.0mmMA416 AO/ASIF Screws 2.7mm Cortex Screw 21.0 - 40.0mmMA417 AO/ASIF Screws 2.7mm Cortex Screw 41.0 - 70.0mmMA418 AO/ASIF Screws 1.0mm Cortex Screw 11.0 - 20.0mmMA420 Macrofit, Tristabil and Unicup Systems Modular, Keramed PROTHITAN Diameter 6.5mm to fit
cancellous screw MACROFIT/TRISTABIL/UNICUP acetabular cup system 15-45mmL
MA443 AO/ASIF Cortex Screws Locking Head Screws Diam 2.4mm, 6-30mm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 463 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medical & Optical Instruments Australia Pty LtdMO005 HBS Bone screw Compression - standard, high Length 10 - 30mmMO006 Screw Cortical Titanium 1.5mm, length 6 - 20mmMO143 Martin Bone Screw Titanium 2.0mm diameter,20 to 24mm lengthMO144 Martin Bone Screw Titanium 2.0mm diameter,26 to 32mm lengthMO148 Acumed Implantable Screw Fixation Screw Titanium 2.7/3.5mm diameter 12 to 24mm lengthMO172 Dynamic Martin Screw Plate Stainless Steel 2 to 8 holeMO173 Dynamic Martin Screw Plate Stainless Steel 10 to 12 holeMO174 Dynamic Martin Screw Plate Stainless Steel 14 holeMO175 Dynamic Martin Screw Support Screw Stainless Steel 50 to 120mm lengthMO176 Dynamic Martin Screw Lag Screw Stainless Steel One size onlyMO177 Acutrak Fixation Screw Wire Kirschner Stainless Steel 0.70mm to 1.6mm diameter, 4 to 9in To be funded where
(10.16 to 22.86mm) length any or all K-wires used in a procedure are used as an implant.
MO178 Acutrak Fusion Screw Titanium 24 to 37mmMO179 Acutrak Fixation Screw Acutrak Cannulated Screw Titanium 8mm to 50mmMO180 Acutrak Fixation Screw Acutrak Plus, 6/7, 4/5 Cannulated Screw 25mm to 120mm
Titanium
Medtronic Sofamor Danek Australia Pty LtdSD030 CD Horizon Pedicle Screws Diameter 5.5 - 7.5 Lengths 25 - 80mmSD077 UCSS Cortical Screws 30 - 50mmSD078 UCSS Cortical Lag Screws 36 - 50mmSD093 Zephir Cancellous Screw 13-17mmSD221 CD Horizon Sextant Percutaneous Cannulated titanium percutaneous multi Dia 3.5 to 9.5mm, Length 15 to 65mm
Cannulated Multi Axial Screw axial screw
SD248 CD Horizon Sextant Multi-Axial Screw Cannulated Percutaneous Multi Axial Set 25 - 60mmSystem Screw
Pacific MedicalPM116 ISKD Internal Limb Lengthening System Titanium Alloy Diameter 12.5 - 14.5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 464 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Smith & Nephew Surgical Pty LtdSN294 Reflection Tapered hole cover (Reflection Interfit) One size onlySN295 Reflection Threaded hole cover (Reflection) One size onlySN419 ACL/PCL Reconstruction Aims Screws, Titanium 7-9mm diameter, 20 -25mm lengthSN420 ACL/PCL Reconstruction RCI Screws Titanium 7-9mm diameter, 25-40mm length SN422 ACL/PCL Reconstructions Acufex Fixation Post 25 -55mmSN423 ACL/PCL Reconstructions Acufex Tibial Fixation Anchor One size onlySN425 ACL/PCL Reconstructions Cannuflex Silk & Soft Silk Interference 5.5 x 20mm - 9x30mmSN432 ACL/PCL Reconstructions Tibial Post Screw Small, StandardSN449 Washer For Cannulated screw systems, Stainless One size onlySN467 Compressing Screw For Intermedullary and compression Hip 19mm & 28.5mm
Screw Systems
SN480 Compression Hip Screw System Intermedullary Hip Screw (IMHS), One size onlyCentering Sleeve, Stainless Steel
SN481 Compression Hip Screw System Standard Lag Screw 55-125mmSN482 Compression Hip Screw System Standard Lag Screw 130mm+SN483 Compression Hip Screw System Super Lag Screw 55mm-140mmSN488 Intermediate Osteotomy System Compressing One size onlySN489 Intermediate Osteotomy System Lag 35 mm - 85mm, 1 1/2" - 3-3/4"SN491 Paediatric Osteotomy System Compressing Screw One size onlySN492 Paediatric Osteotomy System Lag Screw 22mm- 40mmSN504 Russel Taylor Femoral Locking screw F/fem nl 30-90mm. F/r-t nl 25-90mm.SN506 Russel Taylor Humeral Locking Screw 4.0mm Diameter 12-60mmSN508 Russel Taylor Intermedullary Hip Screw (IMHS) Set One size onlySN511 Russel Taylor Locking Screw 4.5mm Diameter 20-65mmSN512 Russel Taylor Locking Step Screw 5.0/6.4mm 25mm-110mmSN513 Russel Taylor Proximal Locking Screw (Recon) 6.4 x 85 to 8 x 110mm.SN514 Russel Taylor Proximal Set Screw (Recon) Short & LongSN516 Russel Taylor Stable-Lok Nut One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 465 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN517 Russel Taylor Washer One size onlySN540 TC 100 1.5mm Screw Hex, Cruciate or Self-tapping 6-24mmSN593 TC 100 Screw 6.5mm Cancellous Screw Fully Threaded 6.5mm Diameter, 25-60mm lengthSN594 TC 100 Screw 6.5mm Cancellous Screw Fully Threaded 6.5mm Diameter, 65-110mm lengthSN595 TC 100 Screw 6.5mm Cancellous Screw Fully Threaded 6.5mm Diameter, 115mm-150mmSN600 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter,32mm thread, 45-
100mm Length
SN601 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter, 32mm thread, 105-125mm Length
SN602 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter, 32mm thread, 130mm+ Length
SN603 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter,16mm thread, 30-70mm Length
SN604 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter, 16mm thread, 75-120mm Length
SN605 TC 100 Screw 6.5mm Cancellous Screw Partially 6.5mm Diameter, 16mm thread, 125mm+ Length
SN606 TC 100 4mm Cancellous Screw Fully or Partially Threaded 10 - 20mmSN607 TC 100 4mm Cancellous Screw Fully or Partially Threaded 22 - 32mmSN608 TC 100 4mm Cancellous Screw Fully or Partially Threaded 32 - 50mmSN609 TC 100 4mm Cancellous Screw Fully or Partially Threaded 55mm +SN612 TC 100 3.5mm Cortex Screw Hex, Cruciate or Self-tapping 85mm +SN618 TC 100 Screw 2.7mm Cortex Bone screw, hexagonal or 2.7mm Diameter, 6mm-28mm Length
crutiate head
SN619 TC 100 Screw 2.7mm Cortex Bone screw, hexagonal or 2.7mm Diameter, 30mm+ Lengthcrutiate head
SN621 TC 100 3.5mm Cortex Screw Hex, Cruciate or Self-tapping 10 - 40mmSN625 TC 100 Screw Malleolar Bone Screw, Sterile 25x12mm - 70x32mmSN629 Bone Screw Full & Partial Thread , Self tapping, 3.5mm Diameter, 1/2-4" length
Stainless Steel
SN635 Cannulated Screw Partial Thread, Stainless Steel 6.5mm Diameter, 16&20mm Thread, 20-135mm
PART A - Prostheses List by Category, Groups and Sponsor Page 466 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SN636 Cannulated Screw Partial Thread, Stainless Steel 6.5mm Diameter, 32mm thread, 45-130mmSN637 Cannulated Screw Partial and Fully Threaded, Stainless Steel 5.5mm Diameter, 20-120mmSN638 Cannulated Screw Partial and Fully Threaded, Stainless Steel 7.0mm Diameter, 30-150mmSN639 Cannulated Screw 6.5mm screw Titanium 6.5mm Diameter, 40mm-110mmSN640 Cannulated Screw 7.0mm screw Titanium 7.0mm Diameter 30-150mm lengthSN641 Cannulated Screw 5.5mm screw Titanium 5.5mm Diameter 8x20mm- 32x120mmSN642 Cannulated Screw 4.0mm Screw Titanium 4.0mm Diameter 20-70mm lengthSN643 Cannulated Screw 8mm Cannulated screws 8mm Diameter 65-125mmSN644 Cannulated Screw 6.4mm Cannulated screws 6.4mm diameter 65-125mm lengthSN675 HTO Screws Titanium 4.5mm Diameter, 20 - 80mm LengthSN700 RCI Screw with Perforations Tinanium interference screw Dia 7 - 10mm, length 25 - 35mmSN765 Peri-Loc Fixation device, internal, locking and non- 2.7mm
locking, stainless steel, cortical and cancellous screws
SN766 Peri-Loc Fixation device, internal, locking and non- 3.5mmlocking, stainless steel, cortical and cancellous screw
SN767 Peri-Loc Fixation device, internal, locking and non- 4.0mmlocking, stainless steel, cortical and cancellous screw
SN768 Peri-Loc Fixation device, internal, locking and non- 4.5mmlocking, stainless steel, cortical and cancellous screw
SN769 Peri-Loc Fixation device, internal, locking and non- 5.7mmlocking, stainless steel, cortical and cancellous screw
SN770 Peri-Loc Fixation device, internal, locking and non- 6.5mmlocking, stainless steel, cortical and cancellous screw
Stryker Australia Pty LtdSK023 ACL Wedge Interference Screw Threaded titanium screw for Dia 7 - 12mm, length 20 - 40mm
ligament/tendon fixation
SK024 Stryker Cross-screw Threaded titanium screw for 8mm x 40-60mmligament/tendon fixation
PART A - Prostheses List by Category, Groups and Sponsor Page 467 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK026 Leibinger screws Profyle titanium hand and small fragment Dia 1.2mm, length 14 - 20mmsystem screws
SK027 Leibinger screws Profyle titanium hand and small fragment Dia 1.9mm, length 8 - 12mmsystem screws
SK028 Leibinger screws Profyle titanium hand and small fragment Dia 2.3mm, length 26 - 38mmsystem screws
SK029 Leibinger screws Profyle titanium hand and small fragment Dia 2.5mm, length 8 - 12mmsystem screws
SK030 Leibinger screws Profyle titanium hand and small fragment Dia 3.0mm, length 8 - 34mmsystem screws
SK046 Stryker Wedge Interference Screw Threaded bioabsorbable screw for Dia 7 - 12mm, length 20 - 40mmligment/tendon fixation
SK047 Stryker Wedge Interference Screw Threaded biosteon screw for Dia 7 - 12mm, length 20 - 40mmligment/tendon fixation
SK053 Stryker Plating System Screws - 6.5mm Diameter, full and partial thread Length 55-95mmSK054 Stryker Plating System Screws - 6.5mm Diameter, full and partial thread Length 100-150mmSK154 Stryker Cross-Screw HA/PLLA screw for ligament/tendon Dia 6mm: Length 40-60mmSK155 Wedge Interference screw Threaded PLLA screw with cross pin for Dia 7-12mm, Length 20-40mm; pin
ligament/tendon fixation length standard
SK256 TwinFix Cannulated Compression Screw Diameter 3.2mm, lengths 14-34mmSystem
SK397 Matrix - SMART Lock Polyaxial Locking Titanium Bone Screws 2.7mm x 8mm to 2.7mm x 38mm in System for Distal Radius 2mm increments, 3.0mm x 8mm to
3.0mm x 34mm in 2mm increments
ST004 Stryker Plating System Screws - Cortical Titanium or Stainless Steel 10-20mm4.5mm
ST005 Stryker Plating System Screws - 6.5mm Stainless Steel or Titanium 20-50mmST006 Stryker Plating System Screws - Stainless Steel or Titanium, Full or Partial 10-60mm Screw Length
Cancellous 4.0mm Thread
ST068 Connector - Multi Axial Titanium 29-99mmST708 Dimso/Stryker Connector Offset sacral connector titanium One size onlyST709 Dimso/Stryker Connector Offset connector titanium One size onlyST710 Dimso/Stryker Connector Multi axial connector titanium 29-31mm,31-35mm,35-39mm,38-
43mm,42-51mm,50-67mm, 66-99mm
PART A - Prostheses List by Category, Groups and Sponsor Page 468 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST830 Stryker Wedge Interference Screw Small threaded titanium screw for Diameter 7 - 9mm, Length 20 - 25mmligament/tendon fixation
ST866 Leibinger 2.7mm Profyle Modular Screw Titanium screws for fixation of hand 2.7 x 8, 10, 12mmST867 Leibinger 2.7mm Profyle Modular Screw Titanium screws for fixation of hand 2.7 x 14, 16, 18mmST868 Leibinger 2.7mm Profyle Modular Screw Titanium screws for fixation of hand 2.7 x 20, 22, 24mmST869 Leibinger 2.7mm Profyle Modular Screw Titanium screws for fixation of hand 2.7 x 26, 28, 30mmST870 Leibinger 2.7mm Profyle Modular Screw Titanium screws for fixation of hand 2.7 x 32, 34, 36, 38mmST871 Leibinger 3.0mm Profyle Modular Screw Titanium screws for fixation of hand 3.0 x 8, 10, 12mmST872 Leibinger 3.0mm Profyle Modular Screw Titanium screws for fixation of hand 3.0 x 14, 16, 18mmST873 Leibinger 3.0mm Profyle Modular Screw Titanium screws for fixation of hand 3.0 x 20, 22, 24mmST874 Leibinger 3.0mm Profyle Modular Screw Titanium screws for fixation of hand 3.0 x 26, 28, 30mmST875 Leibinger 3.0mm Profyle Modular Screw Titanium screws for fixation of hand 3.0 x 32, 34mm
Surgical HouseSU006 Bold Compression Screw Cannulated titanium 3mm diam 10-34mm lengthSU007 ICOS Screw: Ideal Compression Screw Cannulated titanium 4mm diam 26-60mm length, 6.5mm diam
40-90mm length
SU008 Spin Screw: Snap Off Screw Titanium Diameter 2mm, Length 11-14mm; Diameter 2.7mm, Various Lengths; Diameter 3.0mm, Various Lengths
SU019 Furlong Acetabular Cup Titanium screw 2.5 & 3.5 AF 15mm-50mm
Taylor Bryant Pty LtdTB062 Groupe Lepine Acetabular Screws 5.5mm dia in 15mm-60mm length 5mm
increments
TB291 Groupe Lepine - Integra Locking Screw Titanium 28 - 42mm, diameter 5.5mm
TiMax Surgical Pty LtdTI048 CPS Screws Polylactic acid trimethylene carbonate 1.5-2.5mm screw ring 5 pcs
copolymer
TI049 CPS Screws Polylactic acid trimethylene carbonate 2.5mm single screwcopolymer
TI050 CPS Screws Polylactic acid trimethylene carbonate Hexalon ACL screw 7-9 x 20-30mmcopolymer
PART A - Prostheses List by Category, Groups and Sponsor Page 469 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TI066 CPS Bioabsorbable Fixation System Anterior Cervical Plate System: 10-20mmPLGA/TMC Copolymer Screws
TI067 CPS Bioabsorbable Fixation System Anterior Cervical Plate System: One Size OnlyPLGA/TMC Copolymer Locking Screw
ZimmerZI176 Zimmer Internal Fixation Systems: Magna-FX - Stainless Steel 16 mm Thread - 30-30 mm; 32 mm
Cannulated Screw Thread - 40-120 mm; Fully Threaded - 30-130 mm Long
ZI177 Zimmer Internal Fixation Systems: Mini Magna-FX - Stainless Steel 4 & 5mm diametersCannulated Screw
ZI178 Zimmer Internal Fixation Systems: Scaphiod - Titanium Scaphoid - 12 - 30mm lengthHerbert Bone Screw
ZI179 Zimmer Internal Fixation Systems: Herbert/Whipple - Titanium 12 mm - 30 mmHerbert Bone Screw
ZI180 Zimmer Internal Fixation Systems: Cannulated 4.5mm - Titanium 30 - 70mmHerbert Bone Screw
ZI181 Zimmer Internal Fixation Systems: Cannulated 6.5mm - Titanium 25 mm - 100mmHerbert Bone Screw
ZI199 Zimmer ECT Screws 1.5mm Cortical Screws 6 - 18mmZI200 Zimmer ECT Screws 2.0mm Cortical Screws 6 - 24mmZI201 Zimmer ECT Screws 2.7mm Cortical Screws 6 - 50mmZI202 Zimmer ECT Screws 3.5mm Cortical Screws 10 - 130 mmZI203 Zimmer ECT Screws 4.0mm Cancellous Screws 10 - 60 mmZI204 Zimmer ECT Screws 4.5mm Cortical Screws 14 - 120mmZI205 Zimmer ECT Screws 4.5mm Self tapping Cortical Screws 14 - 70mmZI206 Zimmer ECT Screws 4.5 Malleo Screw 25 - 70mmZI207 Zimmer ECT Screws 6.5mm Cancellous Screws 25 - 110mmZI263 Continuum hip system Acetabular Bone screw - Implex 20-65mm lengthsZI370 Cancellous Screws Orthopaedic Screws - Ti alloy 20 to 60ZI399 Cancellous Screws Screws- Cancell - Ti alloy 6.5/15 to 6.5/70mmZI400 Cortical Screws Screws- Cortical - Ti alloy 4.5/30 to 60mmZI448 Cannulated Screw Ti alloy One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 470 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Screws, Cranioplasty Plate
Smith & Nephew Surgical Pty LtdSN002 TC 100 3.5mm Cortical Screws Hex, Cruciate or Self Tapping 45 - 85mmSN007 TC 100 3.5mm Cortical Screws Sterile, Hex or Cruciate 10 - 40mmSN014 TC 100 4.5mm Cortical Screws Hex, Cruciate or Self-tapping 14 - 60mmSN018 TC 100 4.5mm Cortical Screws Hex, Cruciate or Self-tapping 100 - 145mmSN061 TC 100 4.5mm Cortical Screws Hex, Cruciate or Self-tapping 62 - 95mmSN082 TC 100 2.7mm Cortical Screws Hex, Cruciate or Self-tapping 6 - 55mmSN112 TC 100 2.0mm Cortical Screws Self Tapping, Hex or cruciate 6 - 38mmSN123 TC 100 3.5mm Cortical screw Sterile - Hex or Cruciate, Self tapping 10 - 40mm
Sleeves
De Puy AustraliaDP574 C-Stem Centraliser Centraliser Polymethylmethacrylate One size onlyDP872 Charnley Centraliser Charnley Centraliser EA Size 1 and 2
Polymethylmethacrylate
Johnson & Johnson Medical Pty LtdJJ128 Cuff Link High density plastic link 8mm
Smith & Nephew Surgical Pty LtdSN359 Invis Distal Centraliser PMMA 7 - 21mm
Staples, Bone
De Puy AustraliaDP878 Barouk System Staples Varisation Staple Stainless Steel 26-90Deg x 8-10mmDP879 Barouk System Staples Memory Staple - Titanium Alloy 13-20mm Long
PART A - Prostheses List by Category, Groups and Sponsor Page 471 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DP880 Barouk System Staples TIFLEX Staple / Pin - Titanium 1.6 - 2.5 Dia 7-24mm width 13/15-36/50mm Length
Device Technologies Australia Pty LtdDE062 Ligament Staples Cobalt Chromium Molybdenium Alloy 6mm - 16mmDE241 Memofix Staples Nitinol 10-17mm x 12-20mm length
Howmedica IncorporatedHW317 Rutherford Staple Ellison Arched Staple, Vitallium 9,12,15mm x 23mmHW318 Rutherford Staple Ellison Flat Staple, Vitallium 8,11,14 x 23mmHW319 Rutherford Staple Ellison Soft Tissue Retainer, Vitallium 8,11,14mm
Linvatec AustraliaLV015 Staple Fixation System Soft Tissue Re-attachment - Titanium 9.5 - 16.5mmLV025 Staplizer Bone Staple Cartridge 5 Titanium staples per cartridge 7 x 7mm, 7 x 10mm, 10 x 7mm, 10 x
10mm, 10 x 15mm, 13 x 7mm, 13 x 10mm, 13 x 15mm, 13 x 20mm, 16 x 10mm, 16 x 15mm, 16 x 20mm, 16 x
Surgical HouseSU012 Solustaple Standard Staple Stainless steel 90 deg & 26 degree 8 & 10mm lengthSU013 Uni-Clip Compression Staple Stainless steel Width 11mm - 20mm, Length 13mm -
20mm; Notched - Width 11mm - 20mm, Length 13mm - 20mm;
Staples, Tissue
Smith & Nephew Surgical Pty LtdSN414 Shoulder Reconstruction Suretac Absorbable Staple 6-8 x 16mm
Stimulators, Bone Growth
Biomet Australia Pty LtdBI245 EBI Bone Healing System DC Generator, Titanium, Platium, Silver, 1, 2 or 4 lead models
Silicone
PART A - Prostheses List by Category, Groups and Sponsor Page 472 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Suture Buttons
Smith & Nephew Surgical Pty LtdSN426 ACL/PCL Reconstructions EndoButton 4 x 12mmSN427 ACL/PCL Reconstructions Fixation Button 12-17mmSN428 ACL/PCL Reconstructions EndoButton CL 20-50mm
Suture Units, Other
Smith & Nephew Surgical Pty LtdSN141 T-Bar Suture Retention System Fastfix One size onlySN413 Shoulder Reconstruction 3.7mm TAG & Wedge Suture Wedge 3.7mmSN415 Shoulder Reconstruction TAG Bioabsorbable Anchor Wedge 3.7mmSN417 T-Bar Suture Retention System T-Fix RCG 1.8mmSN418 T-Bar Suture Retention System T-Fix Single & Double T-Fix Suture Bar, Straight Needle, Double
Suture
SN442 Mini TAG Suture Anchor 2.0mm 2.0mm
Sutures, Polyester
Smith & Nephew Surgical Pty LtdSN416 Shoulder Reconstruction Fastentor Suture Anchor One size onlySN429 ACL/PCL Reconstructions EndoButton Tape One size only
Sutures, Stainless Steel Monofilament
De Puy AustraliaDP232 Suture Wire Wire Suture Stainless Steel 0.5 to 5mm
PART A - Prostheses List by Category, Groups and Sponsor Page 473 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tissue Reconstructive Materials
Halas Dental Pty LtdHD001 Bio-Oss Bone Natural Bone Mineral Derived from bovine bone 0.25gm Only to be funded
where used in a service for which a Medicare Benefit is payable.
HD002 Bio-Oss Bone Natural Bone Mineral Derived from bovine bone 0.5gm Only to be funded where used in a service for which a Medicare Benefit is payable.
HD003 Bio-Oss Bone Natural Bone Mineral Derived from bovine bone 2.0gm Only to be funded where used in a service for which a Medicare Benefit is payable.
ZimmerZI459 Collagen Meniscus Implant Porous collagen-glycosaminoglcan matrix 7.5mm, 9mm
Washers, Bone Screw
Corin Australia Pty LtdCR043 Corfix Washer for Bone Screws Washer for Bone Screws, Stainless Steel Small 7mm & Large 13mm
Device Technologies Australia Pty LtdDE071 Arthrex Spiked Washer Titanium alloy 14 - 15mm
Johnson & Johnson Medical Pty LtdJJ081 Mitek Soft Tissue Washer Titanium washer 14mm, 17mm & 20mm
Mathys AustraliaMA161 AO/ASIF K-Wires, Pins, Washers etc - Washers/nuts 4.5mm - 13.5mm diaMA167 AO/ASIF K-Wires, Pins, Washers etc Washers/nuts 1.0mm - 16mm diaMA252 Universal Spine System (USS) Washers Pointed, Flat, 4.2 - 7mmMA395 LCP Spacer/Washer LCP Wiremount Spacer Diameter 2mm - 6mm
PART A - Prostheses List by Category, Groups and Sponsor Page 474 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Smith & Nephew Surgical Pty LtdSN424 ACL/PCL Reconstructions Acufex Spiked Washer One size onlySN450 Washer For Cannulated screw systems, Titanium One size onlySN626 TC 100 Washers Stainless Steel 7-13mmSN627 TC 100 Washers Titanium Non Sterile 4.5mm -13mmSN628 TC 100 Washers Titanium Sterile 4.5mm -13mm
ZimmerZI279 Washer system Hedrocel tantulum 12mm x 15mm
Wires, Bone
Mathys AustraliaMA155 AO/ASIF K-Wires, Pins, Washers etc - K-wire single ended Dia .06 - 3.00mm / length 70 - 400mm To be funded where
any or all K-wires used in a procedure are used as an implant.
MA157 AO/ASIF K-Wires, Pins, Washers etc - K-wire double ended Dia 0.8 - 3.0mm & length 70 - 280mm To be funded where any or all K-wires used in a procedure are used as an implant.
MA158 AO/ASIF K-Wires, Pins, Washers etc - K-wires threaded 5 & 15mm / dia .08 - 3.0mm & length To be funded where 70-300mm any or all K-wires used
in a procedure are used as an implant.
MA166 AO/ASIF K-Wires, Pins, Washers etc Pinless pins/clips Asymetric small and largeMA390 A/O/ASIF K-wires, Pins, Washers etc - Cerclage Wire - coils with and without eye 0.4-2.0mm/80-600mm Length To be funded where
Steel - Sterile & Non Sterile any or all K-wires used in a procedure are used as an implant.
MA391 A/O/ASIF K-wires, Pins, Washers etc - Cerclage Wire - coils with and without eye 0.4-2.5mm To be funded where Steel - Sterile & Non Sterile any or all K-wires used
in a procedure are used as an implant.
PART A - Prostheses List by Category, Groups and Sponsor Page 475 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA392 A/O/ASIF K-wires, Pins, Washers etc - Cerclage Wire Kirshcnel Wire Series - One size only To be funded where Steel - Sterile & Non Sterile Osteochondral Hook any or all K-wires used
in a procedure are used as an implant.
Medical & Optical Instruments Australia Pty LtdMO164 Osteo Clage Cable System CoCr Cable 2mm diameter 850mm lengthMO165 Osteo Clage Cable System CoCr Cable Sleeve 2mm diameter 850mm lengthMO166 Osteo Clage Cable System Stainless Steel Cable 850mmMO167 Osteo Clage Cable System Stainless Steel Cable Sleeve 2mmMO168 Osteo Clage Cable System Compression Plate Stainless Steel 5 holeMO169 Osteo Clage Cable System Compression Plate Stainless Steel 7 holeMO170 Osteo Clage Cable System Compression Plate Stainless Steel 9 holeMO171 Osteo Clage Cable System Compression Plate Stainless Steel 11 holeMO196 Osteo Clage Cable System Cerclage wire and sleeve 500mm
Smith & Nephew Surgical Pty LtdSN459 Wire Suture 18Ga - 28Ga To be funded where
any or all K-wires used in a procedure are used as an implant.
Wires, Bone, Implantable
Australian Surgical Design & Manufacture Pty LtdAE052 ASDM K-wire Stainless steel - sterile Dia 0.7 - 2.5mm, length 100 - 230mm To be funded where
any or all K-wires used in a procedure are used as an implant.
Biomet Australia Pty LtdBI857 Kirschner Wires Stainless Steel wire (1-3.2mm) diameter x (100 to 310mm) To be funded where
any or all K-wires used in a procedure are used as an implant.
PART A - Prostheses List by Category, Groups and Sponsor Page 476 of 666
ORTHOPAEDIC Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LMT Surgical Pty LtdLM014 Trimed Marked K-Wire Stainless Steel Diameter 0.9 - 1.1mm To be funded where
any or all K-wires used in a procedure are used as an implant.
MedtexMX003 Kirschner Extension Wire Implantable extension wires for 100mm length x 0.4mm thru to 2.2mm To be funded where
osteosynthesis and fixative purposes diameter in 1mm increments. 150mm any or all K-wires used length x 0.6mm thru to 2.2mm diameter in a procedure are used in 1mm increments. 230mm length x as an implant.0.8mm thru to 3mm diameter in 1mm increments. 305mm length x 0.8mm thru to 3mm diameter in 1mm increments.
Surgical HouseSU048 The Bone Tie Stainless steel wire & tie One size only
Trewavis Surgical Instruments Pty LtdTS001 Trewavis Surgical Kirschner Wires Composition: Stainless Steel, Model No: Dia 0.7-2.8mm, Length 100-230mm To be funded where
200-000-A to 200-930-K any or all K-wires used in a procedure are used as an implant.
ZimmerZI290 Cable Ready Cable Grip System Titanium - comes with two cables (Co 23 x 53mm, 1.8 x 635mm
Cr), Integral Crimps
ZI293 Zimmer Wires Stainless Steel Length 23cm, Thickness 2mm, 0-4mm, To be funded where any or all K-wires used in a procedure are used as an implant.
ZI294 Zimmer Wires Stainless Steel Length 7, 6cm - 23cm, Thickness 0mm, To be funded where 7mm - 2mm, 0mm any or all K-wires used
in a procedure are used as an implant.
ZI297 Cable Ready Cable Grip System Titanium 5 hole GTR with 4 cablesZI298 Cable Ready Cable Grip System Titanium 2 hole GTR with 4 cablesZI299 Cable Ready Cable Grip System Titanium 4 hole GTR with 4 cablesZI310 Stayfuse Titanium inter-digital fusion device Screw 2.8-3.8mm or 3.8 x 6mm, 4.3 x
6mm, 5.0 x 5mm, 5.0 x 6mm; Hex 2.5-
ZI323 Zimmer Wires Stainless Steel Rushpins Diameter 2.4 - 6.4mm; Length 2.5 -
PART A - Prostheses List by Category, Groups and Sponsor Page 477 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Anastomosis Couplers, Vascular
LMT Surgical Pty LtdLM030 Synovis Coupler High Density polyethylene (ring); Diameter 1-3mm Only to be funded
Stainless Steel (pins) where used in a service for which a Medicare Benefit is payable
Bone Matrix Implants, Artificial
Biomet Australia Pty LtdBI487 Mimix Calcium Phosphate Bone Void Filler Calcium Phosphate 5 grams Only to be funded
where used in a service for which a Medicare Benefit is payable
BI488 Mimix Calcium Phosphate Bone Void Filler Calcium Phosphate 10 grams Only to be funded where used in a service for which a Medicare Benefit is payable
BI489 Mimix Calcium Phosphate Bone Void Filler Calcium Phosphate 20 grams Only to be funded where used in a service for which a Medicare Benefit is payable
Implant Innovations Australia Pty LtdNW003 Biogran Resorbable Synthetic Bone Graft 3i Biogran 750mg Glass Syringe 2 pack; Only to be funded
3I Biogran 750mg Glass Syringe 7 pack; where used in a service 3I Biogran 500mg Mixing Cup 7 pack; 3I for which a Medicare 750mg Mixing Cup 7 pack; 3I Biogran Benefit is payable1500mg Mixing Cup 7 pack
Medtronic Sofamor Danek Australia Pty LtdSD182 Macropore Z Plates 10 hole Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 478 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD183 Macropore Cranial Recon 29 - 64mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD184 Macropore Cranial Recon 65 - 165mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD185 Macropore Rectangle Plates 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD186 Macropore Protective Disc 25mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD187 Macropore Rectangle Plates 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD188 Macropore Oblong Plates 6 - 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD189 Macropore CraniDisk 23 - 28mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD190 Macropore Oblique Plates 6 - 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD191 Macropore Protective Sheets 50 x 50 x 0.5mm - 50 x 50 x 1.0mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD192 Macropore Protective Sheets 25 x 25 x 0.5mm - 25 x 25 x 1.0mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 479 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD193 Macropore Orbital Floor Liner 30mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD194 Macropore L Plates 8 hole, Left & Right Only to be funded where used in a service for which a Medicare Benefit is payable
SD195 Macropore Protective Sheets 60 x 80 x 0.5mm - 60 x 80 x 1.0mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD196 Macropore Protective Sheets 100 x 100 x 0.5mm - 100 x 100 x 1.0mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD197 Macropore Y Plates 7 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD198 Macropore Straight Plates 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD199 Macropore Straight Plates 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD200 Macropore Straight Plates 20 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD201 Macropore C Plates 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD202 Macropore Clover Leaf Plates 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 480 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD203 Macropore Bur Hole Cover 25mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD204 Macropore Screws 2.0mm x 4mm - 3.0mm x 14mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD205 Macropore Tacks 1.5 x 4mm - 2.0 x 6mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD215 Macropore Locks 2 - 20mm Only to be funded where used in a service for which a Medicare Benefit is payable
Stryker Australia Pty LtdSK232 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 2.5gm pack Only to be funded
Replacement. Sodium Phosphate Solution where used in a service and Mixing Bowl included for which a Medicare
Benefit is payable
SK233 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 5gm pack Only to be funded Replacement. Sodium Phosphate Solution where used in a service and Mixing Bowl included for which a Medicare
Benefit is payable
SK234 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 10gm pack Only to be funded Replacement. Sodium Phosphate Solution where used in a service and Mixing Bowl included for which a Medicare
Benefit is payable
SK235 BoneSource Classic Bone Cement Calcium Phosphate Bone Matrix 25gm pack Only to be funded Replacement. Sodium Phosphate Solution where used in a service and Mixing Bowl included for which a Medicare
Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 481 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Cement, Orthopedic
Stryker Australia Pty LtdST071 Bonesource Hydroxyapatite Cement with Leibinger Bonesource HA Cement 5g pack Only to be funded
Sodium Phosphate Hydroxyapatite With Sodium Phosphate where used in a service for which a Medicare Benefit is payable
ST073 Bonesource Hydroxyapatite Cement with Leibinger Bonesource HA Cement 10g pack Only to be funded Sodium Phosphate Hydroxyapatite With Sodium Phosphate where used in a service
for which a Medicare Benefit is payable
ST075 Bonesource Hydroxyapatite Cement with Leibinger Bonesource HA Cement 25g pack Only to be funded Sodium Phosphate Hydroxyatatite With Sodium Phosphate where used in a service
for which a Medicare Benefit is payable
Covers, Burr Hole
Johnson & Johnson Medical Pty LtdJJ209 Bioplate Burr Hole Cover Titanium cranial fixation system - burr 1.5mm diam, 12mm length Only to be funded
hole, 6 hole where used in a service for which a Medicare Benefit is payable
JJ210 Bioplate Burr Hole Cover Titanium cranial fixation system - burr 1.5mm diam, 18mm length Only to be funded hole, 6 hole where used in a service
for which a Medicare Benefit is payable
Distractor
Medical & Optical Instruments Australia Pty LtdMO233 Internal Distraction Device Titanium 1.5mm Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 482 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO234 Martin Rigid External Distraction System RED II Titanium Cranial Fixation Screws 45-55mm Temporary approval, II (REDII) pending review of
product group. Only to be funded where used in a service for which a Medicare Benefit is payable
MO235 Internal Distraction Device Kit Titanium 1.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO236 Martin Rigid External Distraction System RED II Aluminium Cranium Frame and One Size Only Temporary approval, II (RED II) Carbon Fibre Rods pending review of
product group. Only to be funded where used in a service for which a Medicare Benefit is payable
MO239 Intra-Oral Distraction System Titanium Distraction Device 1.0mm - 2.7mm Temporary approval, pending review of product group. Only to be funded where used in a service for which a Medicare Benefit is payable
MO240 Martin Rigid External Distraction Device RED II Titanium Maxillary Fixation 1.5mm - 1.8mm Temporary approval, II (REDII) pending review of
product group. Only to be funded where used in a service for which a Medicare Benefit is payable
MO241 Martin Rigid External Distraction System RED II Titanium Threaded Fixation 2.0mm - 15-21mm Temporary approval, II (REDII) pending review of
product group. Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 483 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO242 Martin Rigid External Distraction Device RED II Titanium Fixation Plate 1.5mm Temporary approval, II (REDII) pending review of
product group. Only to be funded where used in a service for which a Medicare Benefit is payable
Expanders, Skin
Device Technologies Australia Pty LtdDE034 Biospan Tissue Expander Silicone Elastomer. Saline filled. 200 - 850 cm3 Only to be funded
where used in a service for which a medicare benefit is payable.
DE123 Skin & Tissue Expander Remote Port - Silicone Shell 10cc to 2000cc Only to be funded where used in a service for which a medicare benefit is payable.
Medical Device Alliance Pty LtdMP040 Silimed Tissue Expanders Round Model # 800, 801, 802, 809 50-900ml Only to be funded
where used in a service for which a Medicare Benefit is payable
MP041 Silimed Tissue Expanders Oval Model # 720, 729 250-800ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP042 Silimed Tissue Expanders Anatomical Model # 20760, 20769 200-800ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP043 Silimed Tissue Expanders Double Chamber Model # 730, 20739 140/180-400/450ml Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 484 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MP044 Silimed Tissue Expanders Anatomical Double Chamber Model # 430-740ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP045 Silimed Tissue Expanders Crescent Model # 820, 821, 829 12-700ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP046 Silimed Tissue Expanders Rectangular Model # 810, 811, 819 30-1000ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP047 Silimed Tissue Expanders Longditudinally Curved Model # 830, 831 220-520ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP048 Silimed Tissue Expanders Ball Shaped Orbital Model # 741, 747 3-60ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP049 Silimed Tissue Expanders Auricular Model # 841, 847 16-55ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP050 Silimed Tissue Expanders Calf Model # 880, 882 145-185ml Only to be funded where used in a service for which a Medicare Benefit is payable
MP051 Silimed Tissue Expanders Finger Syndactylism Model # 851, 857 1-5ml Only to be funded where used in a service for which a Medicare Benefit is payable
Mentor Medical SystemsMN001 Mentor Radovan Tissue Expander - Volume 25cc - 1000cc Only to be funded
where used in a service for which a medicare benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 485 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MN002 Expanders, skin - Volume 350cc - 800cc Only to be funded where used in a service for which a medicare benefit is payable.
Surgiplas MedicalSP010 Nago Tissue Expander Remote port - silicone shell 10 to 2000cc Only to be funded
where used in a service for which a Medicare benefit is payable.
Technology For Life Pty LtdTE001 PMT (Enhanced Surface) Breast Expander Custom 2 Stage and 3 Stage, silicone 10 x 13cm to 16.5 x 16 cm. Plus custom Only to be funded
where used in a service for which a medicare benefit is payable.
TE004 # PMT Tissue Expander - Extremity + Single stage, silicon Shaped 3 x 4cm to 8 x 18 cm Only to be funded where used in a service for which a medicare benefit is payable.
TE005 # PMT Tissue Expander - Extremity + Two stage, silicon Shaped 3 x 4cm to 11 x 22 cm Only to be funded where used in a service for which a medicare benefit is payable.
TE006 # PMT Tissue Expander - Extremity + Three stage, silicon Shaped 3 x 4cm to 11 x 22 cm Only to be funded where used in a service for which a medicare benefit is payable.
TE007 # PMT Breast Expander Single stage, silicon 10 x 13cm to 14 x 18 cm. 13 x 11cm to Only to be funded 15 x 13cm where used in a service
for which a medicare benefit is payable.
TE008 # PMT Breast Expander Two stage, silicon 10 x 13cm to 15 x 16 cm. Plus custom Only to be funded where used in a service for which a medicare benefit is payable.
TE009 # PMT Breast Expander Three stage, silicon plus 10 x 13cm to 16.5 x 16 cm. Plus custom Only to be funded where used in a service for which a medicare benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 486 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Facial Implant, PTFE
Atrium Australia-Pacific Rim Pty LtdAC024 Atrium Advanta PTFE Facial Implant Composition is PTFE Round Strands - Diameter 1.8mm - Only to be funded
(Polytetrafluoroethylene). The implants 3.0mm Length 15cm with or without where used in a service are available in round and oval 15cm preattached trocar; Oval Strands - for which a Medicare strands and with or without a stainless Diameter 2.0mm - 3.5mm by 3.2mm - Benefit is payable.steel trocar introducer. 6.5mm Length 15cm with or without
Fixation Device
Mathys AustraliaMA429 Unilock Plate Mandible Lock Plates 2-19 holes Only to be funded
where used in a service for which a Medicare Benefit is payable.
MA430 Unilock Plate Mandible Lock Plates 20-40 holes Only to be funded where used in a service for which a Medicare Benefit is payable.
Fixation Device, Internal, Plate
Medical & Optical Instruments Australia Pty LtdMO214 Martin Fixation Device Internal - plate Sterile Titanium Straight Plate 2.0mm system 4 - 6 hole Only to be funded
where used in a service for which a Medicare Benefit is payable
MO215 Martin Fixation Device Internal - Plate Sterile Titanium Straight Plate 2.0mm system 8 - hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 487 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO216 Martin Fixation Device Internal - Plate Sterile Titanium Shaped Plate 2.0mm system 4 - 12 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO219 Martin Fixation Device Internal - plate Sterile Titanium Plate 1.0mm system 4-8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO220 Martin Fixation Device Internal - Plate Sterile Titanium straight Plate 1.0mm system 12-16 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO221 Martin Fixation Device Internal - plate Sterile Titanium shaped Plate 1.0mm system 5 to 10 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO222 Martin Fixation Device Internal - Plate Sterile Titanium straight Plate 1.0mm system 24 to 32 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO223 Martin Fixation Device Internal - Plate Sterile Titanium shaped Plate 1.0mm system 10 to 16 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO224 Martin Fixation Device Internal - Plate Sterile titanium Lindorf chin plate 1.5mm to 2.0mm diameter system Only to be funded where used in a service for which a Medicare Benefit is payable
MO225 Martin Fixation Device Internal - Plate Sterile Titanium Lindorf Plate 1.5mm system left and right plate Only to be funded where used in a service for which a Medicare Benefit is payable
MO226 Martin Fixation Device Internal - Plate Sterile Titanium shaped Plate 1.5mm system Only to be funded where used in a service for which a Medicare Benefit is payable
MO227 Martin Fixation Device Internal - Plate Sterile Titanium plate 1.5mm system 4 to 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 488 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO228 Martin Fixation Device Internal - Plate Sterile Titanium Plate 1.5mm system 2 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO237 Martin Fixation Device Internal - Plate Sterile Titanium Straight Plate 1.5 - 2.0mm System 16 - Hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO238 Martin Fixation Device Internal - Plate Sterile Titanium Straight Plate 1.5mm System 8 - Hole Temporary approval, pending review of product group. Only to be funded where used in a service for which a Medicare Benefit is payable
MO245 Martin Fixation Device Internal - Plate Sterile Titanium Straight Plate 1.5 - 2.0mm System 16 - Hole Only to be funded where used in a service for which a Medicare Benefit is payable
Fixation Device, Internal, Screw
Medical & Optical Instruments Australia Pty LtdMO212 Martin Fixation Device Internal - Screw Sterile Titanium Screw 2.00mm diameter; 4 to 11mm length Only to be funded
where used in a service for which a Medicare Benefit is payable
MO213 Martin Fixation Device Internal Screw Sterile Titanium Screw 2.0mm diameter; 12 - 20mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO217 Martin Fixation Device Internal - Screw Sterile Titanium Screw 2.3mm diameter 5 to 11mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO218 Martin Fixation Device Internal - Screw Sterile Titanium Screw 1.0mm to 1.2mm diameter 2 to 7mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 489 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO229 Martin Fixation Device Internal - Screw Sterile Titanium Screw 1.5mm to 1.8mm diameter; 3.5mm to Only to be funded 9mm length where used in a service
for which a Medicare Benefit is payable
MO230 Martin Fixation Device Internal - Screw Sterile Titanium Screw 1.5mm to 1.8mm diameter; 10 to 15mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO232 Martin Fixation Device Internal - Plate Sterile Titanium Y & Double Y Plate 2.0mm System Only to be funded where used in a service for which a Medicare Benefit is payable
Medtel Australia Pty LtdME177 Face to Face Fixture MK II - Titanium Composition 10mm Only to be funded
where used in a service for which a Medicare Benefit is payable
ME178 Face to Face Cover Screw with Internal Hexagon One Size Only Only to be funded where used in a service for which a Medicare Benefit is payable
ME179 Face to Face Abutment Complete - Titanium 3, 4, 5.5, 7mm Only to be funded where used in a service for which a Medicare Benefit is payable
ME180 Face to Face Console Abutment Unigrip - Titanium 30, 60, 90, 110 Degrees Only to be funded where used in a service for which a Medicare Benefit is payable
ME181 Face to Face Healing Abutment Unigrip - Titanium 7mm Only to be funded where used in a service for which a Medicare Benefit is payable
TiMax Surgical Pty LtdTI086 Ultimax Bone Screws Titanium-Sterile 1.0-2.3 x 2-22mm, eachTI087 Ultimax Bone Screws Titanium-Sterile 1.0-2.3 x 2-22mm, 4 pack Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 490 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TI088 Ultimax Bone Screws Titanium-Sterile 1.0-2.3 x 2-22mm, 5 pack Only to be funded where used in a service for which a Medicare Benefit is payable
Grafts, Bone, Synthetic
Austramedex (VIC) Pty LtdAR001 Nova Bone Bonegraft particulate 6cc/8g Only to be funded
where used in a service for which a Medicare Benefit is payable
AR002 Nova Bone Bonegraft particulate 3cc/4g Only to be funded where used in a service for which a Medicare Benefit is payable
Pacific MedicalPM001 Perioglas: Bioglass granules 0.5cc Only to be funded
where used in a service for which a Medicare Benefit is payable
Jaw Fracture Fixation Devices
Mathys AustraliaMA257 AO/ASIF Facio-maxillary Plates 1.0mm Micro Straight Micro Adaption Plate, 100mm Only to be funded
where used in a service for which a Medicare Benefit is payable
MA258 AO/ASIF Facio-maxillary Plates 1.0mm Micro - Shaped, L, Y, T, X & H 4 - 20 hole Only to be funded Plates, Double, Burr Hole Cover where used in a service
for which a Medicare Benefit is payable
MA259 AO/ASIF Facio-maxillary Plates 1.0mm Orbital - Micro, Left, Right, 1.0mm Only to be funded Medial Wall, Universal Orbital where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 491 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA260 AO/ASIF Facio-maxillary Plates 1.5mm Mini Straight, Adaption 20 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA261 AO/ASIF Facio-maxillary Plates 1.5mm Mini - Shaped, Straight, L, Y, T, 2-20 hole Only to be funded X Plates, Shaft, Burr Hole Cover, Right where used in a service
for which a Medicare Benefit is payable
MA262 AO/ASIF Facio-maxillary Plates Orbital Floor, Mesh & Wall plates 1.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
MA263 AO/ASIF Facio-maxillary Plates 2.0mm Straight Plate 2-30 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA264 AO/ASIF Facio-maxillary Plates 2.0mm Mini Shaped, TI Maxillary, Chin, 2 - 20 hole & 3x3 hole/ 3mm - 29mm Only to be funded Straight, Shaped, Double, Single, Offset, where used in a service Curved, Lock, Zygometic, L, Y, X, H, Z, for which a Medicare Burr Hole Cover, Left & Right, Short & Benefit is payable
MA265 AO/ASIF Facio-maxillary Plates Plate 2.7mm DCP/EDCP, Wide 2-6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA266 AO/ASIF Facio-maxillary Plates Plate 2.7 mm Straight Reconstruction 2-28 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA267 AO/ASIF Facio-maxillary Plates Plate 2.7mm Angled Reconstruction - 2+2 hole - 6+18 hole Only to be funded Left & Right where used in a service
for which a Medicare Benefit is payable
MA268 AO/ASIF Facio-maxillary Plates Plate 2.7mm Mandible Reconstruction 26 -32 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA269 AO/ASIF Facio-maxillary Plates Plate 2.7mm TMJ Condylar Prosthesis, 3+2 hole - 3+3 hole / 16+3 hole - 20+5 Only to be funded Reconstruction - Left & Right, Long hole / L40mm - 50mm where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 492 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MA270 AO/ASIF Facio-maxillary Plates TI Plate Straight Thorpe Reconstruction - 6 - 24 hole / 15+5 - 24+6 hole Only to be funded Right & Left where used in a service
for which a Medicare Benefit is payable
MA271 AO/ASIF Facio-maxillary Plates Plate 2.0mm Mandible Mini plate 2-20 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA272 AO/ASIF Facio-maxillary Plates Plate 2.4mm Mandible 2-50 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA273 AO/ASIF Facio-maxillary Plates 2.0mm Locking plates 2-20 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA274 AO/ASIF Facio-maxillary Plates 1.3mm Plates 2-24 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MA275 AO/ASIF Facio-maxillary Plates Mesh Plate 1.0 - 1.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
MA276 AO/ASIF Facio-maxillary Plates Dysgnathia Plate & Slider - Split, Curved, 2.0mm / 2-20 holes Only to be funded Low Profile, Straight, Splitfix Plate, where used in a service
for which a Medicare Benefit is payable
Mesh
Aus Systems Pty LtdAU057 Titanium Surgical Mesh Titanium Surgical Mesh Mesh to suit 2mm screw Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 493 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AU058 Titanium Surgical Mesh Titanium Surgical Mesh Mesh to suit 1.5mm screw Only to be funded where used in a service for which a Medicare Benefit is payable
Mesh, Metallic
Stryker Australia Pty LtdSK305 Leibinger Dynamic Mesh Titanium Mesh Dynamic Mesh 90x90x0.6mm for screws Only to be funded
1-1.4mm where used in a service for which a Medicare Benefit is payable
Mesh, Polyglycolic Acid
Stryker Australia Pty LtdST526 Stryker Leibinger Resorbable Fixation Resorbable Mesh Tripolymer 55x55mm Only to be funded
where used in a service for which a Medicare Benefit is payable
Mesh, Polymeric
TiMax Surgical Pty LtdTI064 Inion GTR Biodegradable System PLGA/TMC Copolymer: membrane & a) 30 x 40mm membrane kit; b) 6 tack kit Only to be funded
and applicator where used in a service for which a Medicare Benefit is payable
TI065 Inion GTR Biodegradable System PLGA/TMC Copolymer: membrane & 6 tack kit Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 494 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic External Fixation Systems, Other
Biomet Australia Pty LtdBI812 Blue Device Multivector Distraction System Blue device frame, aluminium & carbon One size only Only to be funded
where used in a service for which a Medicare Benefit is payable.
BI813 Blue Device Multivector Distraction System Blue device, pre-stretched wire, titanium 12 inches, 18-24 gauge In strict accordance with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
BI814 Blue Device Multivector Distraction System Attachment plates, titanium 4-6 Hole Only to be funded where used in a service for which a Medicare Benefit is payable.
BI815 Blue Device Multivector Distraction System Distraction assembly, aluminium and One size only Only to be funded carbon fiber where used in a service
for which a Medicare Benefit is payable.
BI816 Blue Device Multivector Distraction System Cranial screw, titanium 45mm Only to be funded where used in a service for which a Medicare Benefit is payable.
BI817 Blue Device Multivector Distraction System Threaded fixation screw, titanium 2.0mm system, 15-25mm Only to be funded where used in a service for which a Medicare Benefit is payable.
Medical & Optical Instruments Australia Pty LtdMO246 Martin Rigid External Distraction System REDII Aluminium and Carbon Fibre One size only Temporary approval,
II (REDII) Cross-Bar Assembly pending review of product group. Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 495 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic Internal Fixation Systems
Surgiplas MedicalSP039 Bioresorbable Fixation System Screws 1.6 x (4-8)mm, 4pack; 2.0 x (4-8)mm, 4 Only to be funded
where used in a service for which a Medicare Benefit is payable
SP041 Bioresorbable Fixation System Plates Comminution Plate, 20 x 30mm Mesh, Only to be funded Neuro Fixation Set where used in a service
for which a Medicare Benefit is payable
SP042 Bioresorbable Fixation System Plates "L" Plate Left & Right, "T" Plate, Double Only to be funded "Y" Plate Short & Long, Orbital Plate, 4 where used in a service & 8 Hole straight Plate, Square Plate for which a Medicare
Benefit is payable
SP043 Bioresorbable Fixation System Plates 50 x 50mm Bioresorbable Mesh; 111 x Only to be funded 191mm, 125 x 180mm, & Medium Mesh where used in a service Plate; 40 x 40mm, 90 x 90mm Osteoform for which a Medicare Mesh; Benefit is payable
SP044 Bioresorbable Fixation System Plates 100 x 100mm Bioresorbable Mesh; 150 x Only to be funded 300mm, & Large Mesh Plate; 90 x where used in a service 90mm, 95 x 165mm, & Large Pre- for which a Medicare formed Osteoform Mesh; Benefit is payable
Orthopedic Internal Fixation Systems, Fracture
Biomet Australia Pty LtdBI492 Small Fragment Titanium System Plate, Rectangle, 1.2mm, 1.7mm, 2.3mm 2 x 2 hole x (0.6mm or 1) mm height Only to be funded
System, Titanium where used in a service for which a Medicare Benefit is payable
BI493 Small Fragment Titanium System Plate, Rectangular, Parallelogram, 4 x 2 hole x (0.6mm, 1mm) height Only to be funded Trapezoid; 1.2mm or 1.7mm or 2.3mm where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 496 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI495 Small Fragment Titanium System Plate, Y or L or T; 1.2mm System, (5-9) hole x 0.6mm height Only to be funded 1.7mm System; Titanium where used in a service
for which a Medicare Benefit is payable
BI496 Small Fragment Titanium System Plate, Straight, Std or Compression; (0.6mm or 1mm height) x (4-6 hole) Only to be funded 1.7mm or 2mm or 2.3mm System; where used in a service
for which a Medicare Benefit is payable
BI497 Small Fragment Titanium System Plate, Straight, 1.2mm or 1.7mm System, 16 hole x 0.6mm height Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI499 Small Fragment Titanium System Washer, Lag Screw 1.2,1.7, 2.3mm 0.6mm or 1mm height Only to be funded where used in a service for which a Medicare Benefit is payable
BI512 Small Fragment Titanium System Bone Screw, Titanium 1.4mm x (4 - 10) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI515 Small Fragment Titanium System Bone Screw, Titanium 1.2mm x (7 - 19) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI520 Small Fragment Titanium System Bone Screw, Titanium 1.7mm x (5 - 10) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI523 Small Fragment Titanium System Bone Screw, Titanium 1.7mm x (11 - 27) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI525 Small Fragment Titanium System Bone Screw, Emergency Titanium (1.9mm or 2.5mm) x (5-6mm) Only to be funded where used in a service for which a Medicare Benefit is payable
BI528 Small Fragment Titanium System Bone Screw, Titanium 2.3mm x (6 - 23) mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 497 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI530 Small Fragment Titanium System Bone Screw, Titanium 2.3mm x (25 - 33) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI532 Small Fragment Titanium System Plate, Straight, Compression; Titanium (4-6 hole) x 1.25mm height Only to be funded where used in a service for which a Medicare Benefit is payable
BI538 Small Fragment Titanium System Plate, Condylar, Left or Right, 1.7mm or (5 or 7 hole) x (0.6mm or 1) mm height Only to be funded 2.3mm System where used in a service
for which a Medicare Benefit is payable
BI541 Small Fragment Titanium System Y Plate, 2.3mm System, Titanium (7 or 9 hole) x (1.0 or 1.25) mm height Only to be funded where used in a service for which a Medicare Benefit is payable
BI544 Small Fragment Titanium System Plate, T or L, 2.3mm System, Titanium (6 - 9 hole) x (1.0 or 1.25) mm height Only to be funded where used in a service for which a Medicare Benefit is payable
BI546 Small Fragment Titanium System Plate, T or L, Compression, 2.3mm 6 hole x (1.00 or 1.25) mm height Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI551 Small Fragment Titanium System Z Plate, 2.3mm System, Titanium 13 hole, 1mm height Only to be funded where used in a service for which a Medicare Benefit is payable
BI723 Mandibular Fracture System Screw, High Torque 2.0/2.4 Mandibular 2.7 x (6-20)mm Only to be funded Fracture, Titanium where used in a service
for which a Medicare Benefit is payable
BI726 Mandibular Fracture System Screw, High Torque (HT), Emergency, Dia 2.3mm x 4.0, 5.0, 7.0, 9.0, 11.0, Only to be funded 2.0/2.4 Mandibular Fracture System, 13.0, 15.0mm Lengths where used in a service
for which a Medicare Benefit is payable
BI731 Mandibular Fracture System Washer, for High Torque (HT) Lag 2.0 (dia), 2.4 (dia) Only to be funded Screw, 2.0/2.4 Mandibular Fracture where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 498 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI744 Mandibular Fracture System Screw, High Torque 2.0/2.4 Mandibular 2.0 x (9-17)mm Only to be funded Fracture, Titanium where used in a service
for which a Medicare Benefit is payable
BI747 Mandibular Fracture System Screw, High Torque (HT), Lag, 2.0/2.4 Dia 2.0 x 19, 21.0, 23, 25, 27, 29mm Only to be funded Mandibular Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
BI748 Mandibular Fracture System Screw, High Torque (HT), 2.0/2.4 Dia 2.4 x 6.0mm, 8.0, 10.0, 12.0, 14.0, Only to be funded Mandibular Fracture System, Titanium 16.0, 18.0mm Lengths where used in a service
for which a Medicare Benefit is payable
BI749 Mandibular Fracture System Screw, High Torque (HT), 2.0/2.4 Dia 2.4 x 20.0mm Lengths Only to be funded Mandibular Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
BI750 Mandibular Fracture System Plates, Angled or Curved, 2.0 Mandibular 4-10 hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI751 Mandibular Fracture System Screw, High Torque (HT), Lag, 2.0/2.4 2.4mm Dia, 24, 28, 32, 36, 40mm Lengths Only to be funded Mandibular Fracture, Titanium where used in a service
for which a Medicare Benefit is payable
BI753 Mandibular Fracture System Plates, Matrix Shape, 2.0 Mandibular 2 x (2, 4, 6, 8) hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI754 Mandibular Fracture System Plates, Compression, 2.0 Mandibular 4 hole Only to be funded Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
BI755 Mandibular Fracture System Plates, Y Shapek, 2.0 Mandibular 5 hole long, 5 hole medium, 5 hole regular Only to be funded Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
BI756 Mandibular Fracture System Plates, Compression, 2.0 Mandibular 6 hole, 8 hole Only to be funded Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 499 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI759 Mandibular Fracture System Plates, Matrix Shape, 2.0 Mandibular 5 hole long, 5 hole medium, 5 hole regular Only to be funded Fracture System, Titanium where used in a service
for which a Medicare Benefit is payable
BI761 Mandibular Fracture System Plates, V Shape, 2.0 Mandibular Fracture 6-10 hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI762 Mandibular Fracture System Plates, 2.4 Mandibular Fracture System, 16 hole Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI764 Mandibular Fracture System Plates, 2.4 Mandibular Fracture System, 4, 6, 8 hole Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI767 Mandibular Fracture System Plates, Straight, 2.0 Mandibular Fracture 4 hole, 6 hole, 8 hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
Stryker Australia Pty LtdST369 Luhr Fixation System Luhr Mandibular Compression System: Curved: 30,38, 45mm, Straight: 30, 40, Only to be funded
curved, straight, metacarpal plate Vitallium 50, 60, 80mm, metacarpal: 41, 45mm where used in a service for which a Medicare Benefit is payable
ST378 Luhr Fixation System Luhr Mandibular Compression and 2.7x6-34mm, emergency: 3.0x10-14mm Only to be funded Reconstruction System Screws: self- where used in a service tapping and MCS emergency screws for which a Medicare
Benefit is payable
ST390 Luhr Fixation System Luhr Micro and Pan Fixation Systems: 40x60mm Only to be funded Micro mesh Vitallium where used in a service
for which a Medicare Benefit is payable
ST391 Luhr Fixation System Luhr Micro and Pan Fixation Systems: 60x100mm Only to be funded Micro mesh Vitallium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 500 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST392 Luhr Fixation System Luhr Micro Fixation System: micro 6 holes, 6x7mm Only to be funded double-T-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST393 Luhr Fixation System Luhr Micro Fixation System: micro 7 holes, 10x10mm Only to be funded double-T-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST394 Luhr Fixation System Luhr Micro Fixation System: micro 11 holes, 10/18mm Only to be funded double-T-shape plate, Y-shape plate, where used in a service ladder plate Vitallium for which a Medicare
Benefit is payable
ST395 Luhr Fixation System Luhr Micro Fixation System: micro L- 5 holes, 14x2.5mm, 14x4mm, 7 holes, Only to be funded shape plate Vitallium 22x4mm where used in a service
for which a Medicare Benefit is payable
ST396 Luhr Fixation System Luhr Micro Fixation System: micro 4 holes, 14mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST397 Luhr Fixation System Luhr Micro Fixation System: micro 6 holes, 22mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST398 Luhr Fixation System Luhr Micro Fixation System: micro 8 holes, 30mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST399 Luhr Fixation System Luhr Micro Fixation System: micro 10 holes, 40mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST400 Luhr Fixation System Luhr Micro Fixation System: micro 15 holes, 60mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST401 Luhr Fixation System Luhr Micro Fixation System: micro 22 holes, 90mm Only to be funded straight plate Vitallium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 501 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST402 Luhr Fixation System Luhr Micro Fixation System: micro T- 6 holes, 14mm, 8 holes, 22mm Only to be funded shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST403 Luhr Fixation System Luhr Pan Fixation System: micro T-shape 6 holes Only to be funded plate, custom Vitallium where used in a service
for which a Medicare Benefit is payable
ST404 Luhr Fixation System Luhr Micro Fixation System: ladder plate 10 Holes, 6 x 8mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST405 Luhr Fixation System Luhr Micro Fixation System: double-Y- 8 Holes, 22mm Only to be funded shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST406 Luhr Fixation System Luhr Micro Fixation System: emergency 1.0x8-12mm Pack of 6 Only to be funded screws Vitallium where used in a service
for which a Medicare Benefit is payable
ST407 Luhr Fixation System Luhr Micro Fixation System: cortical 0.8x2-8mm Pack of 6 Only to be funded screws Vitallium where used in a service
for which a Medicare Benefit is payable
ST408 Luhr Fixation System Luhr Micro Fixation System: emergency 1.0x2-6mm Only to be funded screws Vitallium where used in a service
for which a Medicare Benefit is payable
ST409 Luhr Fixation System Luhr Mini Fixation System: compression, 4 holesx22mm, 15 holesx45mm Only to be funded T-shape, zig-zag plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST410 Luhr Fixation System Luhr Mini Fixation System: compression 4 holes x 21mm, 5 holes x 27mm, 7 holes Only to be funded mini curved plate Vitallium x 38mm, 9 holes x 50mm where used in a service
for which a Medicare Benefit is payable
ST411 Luhr Fixation System Luhr Mini Fixation System: compression 4 holes x 22mm, 4 holes x 37mm Only to be funded mini T-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 502 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST412 Luhr Fixation System Luhr Pan Fixation System: condensed, 4 holes x 12mm, 6 holes x 18mm, 12 Only to be funded straight plate Vitallium holes x 36mm where used in a service
for which a Medicare Benefit is payable
ST413 Luhr Fixation System Luhr Pan Fixation System: double-T- 4 holes, 12mm Only to be funded shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST414 Luhr Fixation System Luhr Pan Fixation System: ladder plate 10 holes, 39 x 9mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST415 Luhr Fixation System Luhr Pan Fixation System: L-shape plate, 4 holes, 16 x 9mm, 22 x 9mm Only to be funded 90 deg Vitallium where used in a service
for which a Medicare Benefit is payable
ST416 Luhr Fixation System Luhr Pan Fixation System: L-shape plate, 4 holes, 16 x 9mm, 22 x 9mm Only to be funded 110 deg Vitallium where used in a service
for which a Medicare Benefit is payable
ST417 Luhr Fixation System Luhr Pan Fixation System: straight plate 4 holes, 21mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST418 Luhr Fixation System Luhr Pan Fixation System: straight plate 6 holes, 33mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST419 Luhr Fixation System Luhr Pan Fixation System: straight plate 8 holes, 45mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST420 Luhr Fixation System Luhr Pan Fixation System: straight plate 16 holes, 93mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST421 Luhr Fixation System Luhr Pan Fixation System: X-shape plate 4 holes, 18mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 503 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST422 Luhr Fixation System Luhr Pan Fixation System: Y-shape plate 4 holes, 16, 22mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST423 Luhr Fixation System Luhr Pan Fixation System: T-shape plate 4 Holes, 22mm Only to be funded Vitallium where used in a service
for which a Medicare Benefit is payable
ST424 Luhr Fixation System Luhr Mini Fixation System: mini curved 4 holes, 21mm Only to be funded plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST425 Luhr Fixation System Luhr Mini Fixation System: mini curved 5 holes, 27mm Only to be funded plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST426 Luhr Fixation System Luhr Mini Fixation System: mini curved 7 holes, 38mm Only to be funded plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST427 Luhr Fixation System Luhr Mini Fixation System: mini curved, 11 holes, 50mm Only to be funded compression plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST428 Luhr Fixation System Luhr Mini Fixation System: mini double- 4 holes, 15mm Only to be funded T-shape plate, non-compression plate where used in a service
for which a Medicare Benefit is payable
ST429 Luhr Fixation System Luhr Mini Fixation System: mini double- 4 holes x 20mm Only to be funded T-shape plate, non-compression plate where used in a service
for which a Medicare Benefit is payable
ST430 Luhr Fixation System Luhr Mini Fixation System: Z shaped 4 holes x 25mm Only to be funded plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST431 Luhr Fixation System Luhr Mini Fixation System: mini double- 9 holes, 30mm Only to be funded T-shape plate, non-compression plate where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 504 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST432 Luhr Fixation System Luhr Mini Fixation System: mini 8 holes, 60mm Only to be funded fragmentation plate, non-compression where used in a service plate Vitallium for which a Medicare
Benefit is payable
ST433 Luhr Fixation System Luhr Mini Fixation System: mini 12 holes, 90mm Only to be funded fragmentation plate, non-compression where used in a service plate Vitallium for which a Medicare
Benefit is payable
ST434 Luhr Fixation System Luhr Mini Fixation System: non- 4 holes, 2.0x17.5mm, 2.0x22mm Only to be funded compression mini L-shape plate, where used in a service right/left, 90/110 deg Vitallium for which a Medicare
Benefit is payable
ST435 Luhr Fixation System Luhr Mini Fixation System: compression 4 holes, 2.0x22mm Only to be funded mini L-shape plate, right/left, 90/110 deg where used in a service Vitallium for which a Medicare
Benefit is payable
ST436 Luhr Fixation System Luhr Mini Fixation System: non- 6 holes, 2.0x37mm Only to be funded compression mini L-shape plate, 90/110 where used in a service deg, right/left Vitallium for which a Medicare
Benefit is payable
ST437 Luhr Fixation System Luhr Mini Fixation System: compression 2.0 x 37mm Only to be funded mini L-shape plate, right/left, 90/110 deg where used in a service Vitallium for which a Medicare
Benefit is payable
ST439 Luhr Fixation System Luhr Mini Fixation System: non- 4 holes, 2.0 x 21mm, 2.0 x 29mm, 2.0 x Only to be funded compression mini straight plate Vitallium 37mm where used in a service
for which a Medicare Benefit is payable
ST440 Luhr Fixation System Luhr Mini Fixation System: non- 4 holes, 2.0 x 22mm Only to be funded compression mini Y-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST441 Luhr Fixation System Luhr Mini Fixation System: non- 6 holes, 2.0 x 28mm Only to be funded compression mini Y-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
ST442 Luhr Fixation System Luhr Mini Fixation System: non- 4 holes, 2.0 x 17mm, 2.0 x 22mm Only to be funded compression mini Z-shape plate Vitallium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 505 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST443 Luhr Fixation System Luhr Mini Fixation System: emergency 6mm, 8mm, 10mm, 12mm Pack of 6 Only to be funded screws Vitallium where used in a service
for which a Medicare Benefit is payable
ST444 Luhr Fixation System Luhr Mini/ Pan Fixation System: 3-20mm. Pack of 6 Only to be funded emergency and standard screws Vitallium where used in a service
for which a Medicare Benefit is payable
ST445 Luhr Fixation System Luhr Mini Fixation System: small 3, 4, 6, 8, 10, 12, 14, 16, 18, 20mm Pack Only to be funded fragment and emergency screws where used in a service
for which a Medicare Benefit is payable
ST850 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 200 x 200mm for 1.0 - 1.4mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST851 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.3 x 120 x 120mm for 1.0 - 1.4mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST852 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 120 x 120mm for 1.0 - 1.4mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST853 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.3 x 120 x 120mm for 1.7 - 1.9mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST854 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 120 x 120mm for 1.7 - 1.9mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST855 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.3 x 120 x 120mm for 2.0 - 2.3mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST856 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 120 x 120mm for 2.0 - 2.3mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 506 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST857 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 200 x 200mm for 1.7 - 1.9mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST858 Dynamic Mesh Titanium cranio maxillofacial mesh for 0.6 x 200 x 200mm for 2.0 - 2.3mm Only to be funded the fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST859 Quik Disk, cranial clamp Cranio and maxillofacial mesh for the 14 and 20mm Only to be funded fixation of fractures where used in a service
for which a Medicare Benefit is payable
ST860 Neuroclip Used for permanent fixation of cranial 1.7mm Only to be funded bone flaps where used in a service
for which a Medicare Benefit is payable
ST861 Auto Pilot Cross Pin Self-drilling screws Used for permanent fixation of cranial Dia 1.9 x length 4mm Only to be funded bone flaps where used in a service
for which a Medicare Benefit is payable
ST862 Auto Pilot Cross Pin Self-drilling screws Used for permanent fixation of cranial Dia 1.7 x length 4 - 7mm Only to be funded bone flaps where used in a service
for which a Medicare Benefit is payable
ST863 Auto Pilot Cross Pin Self-drilling screws Used for permanent fixation of cranial Dia 2.0 x length 4 - 8mm Only to be funded bone flaps where used in a service
for which a Medicare Benefit is payable
ST864 Auto Pilot Cross Pin Self-drilling screws Used for permanent fixation of cranial Dia 2.3 x lengths 4 and 6mm Only to be funded bone flaps where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 507 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Orthopedic Internal Fixation Systems, Other
Biomet Australia Pty LtdBI348 W Lorenz Osteosynthesis System L-Plate, 2mm System, Left or Right. 2 x 2 hole, Mini or Low Profile Only to be funded
where used in a service for which a Medicare Benefit is payable
BI349 W Lorenz Osteosynthesis System Plate, Compression Straight, 2mm 4 hole Only to be funded System. Titanium where used in a service
for which a Medicare Benefit is payable
BI351 W Lorenz Osteosynthesis System L-Plate, 2mm System, Left or Right. 2 x 2 hole, long Only to be funded where used in a service for which a Medicare Benefit is payable
BI353 W Lorenz Osteosynthesis System Plate, Burr Hole, 1mm, 1.5mm, 2mm Small, Large Only to be funded where used in a service for which a Medicare Benefit is payable
BI359 W Lorenz Osteosynthesis System Plate, Straight, mini, 2.0mm System, 4 - 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI360 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive, Std 2.0mm x (4 - 7) mm Only to be funded or Self Drilling; Titanium where used in a service
for which a Medicare Benefit is payable
BI365 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 2.0mm x (9 - 19) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI375 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 2.7mm x (8 - 18) mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 508 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI381 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 2.7mm x (22 - 28) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI383 W Lorenz Osteosynthesis System Plate, Straight, 2.4mm, 2.7mm System; 4 hole (35mm) or 6 hole (40mm) Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI385 W Lorenz Osteosynthesis System Plate, Angled or Straight, 2.4mm or 4-8 hole Only to be funded 2.7mm System, Titanium where used in a service
for which a Medicare Benefit is payable
BI390 W Lorenz Osteosynthesis System Plate, Angled 45 degrees, 2.4mm or 4 hole (35 or 40mm) Only to be funded 2.7mm system, Titanium where used in a service
for which a Medicare Benefit is payable
BI392 Lactosorb Resorbable Craniomaxillofacial Lactosorb Plates, 1.5mm System, All 4 - 20 hole Only to be funded Fixation System sizes, shapes PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI428 Lorenz 2.4mm Locking Reconstruction Add on Plate, Parallel, Arched, Y, 3 to 6 hole, 12x2 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
BI435 Lorenz 2.4mm Locking Reconstruction Holding Screw Head, 1.5mm Add-on 1.5mm Only to be funded System Plates. Titanium where used in a service
for which a Medicare Benefit is payable
BI436 Lorenz 2.4mm Locking Reconstruction Holding Screw modular head, 1.5mm 2.4mm Only to be funded System Add-On plates. Titanium where used in a service
for which a Medicare Benefit is payable
BI439 Lorenz 2.4mm Locking Reconstruction Plate, Low Profile, Angled, 2.4mm 5 x (22 -24) hole Only to be funded System System Titanium where used in a service
for which a Medicare Benefit is payable
BI440 Lorenz 2.4mm Locking Reconstruction Plate, Angled, 2.4mm System Titanium 5 x 22 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 509 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI443 Lorenz 2.4mm Locking Reconstruction Plate, Low Profile, Angled, 2.4mm 5 x 11 hole Only to be funded System System Titanium where used in a service
for which a Medicare Benefit is payable
BI445 Lorenz 2.4mm Locking Reconstruction Plate, Angled, 2.4mm System Titanium 5 x 11 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
BI447 Lorenz 2.4mm Locking Reconstruction Plate, Curved, Std Thickness, 2.4mm 8 or 20 hole Only to be funded System System, Titanium where used in a service
for which a Medicare Benefit is payable
BI448 Lorenz 2.4mm Locking Reconstruction Plate, low profile, curved. titanium 20 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
BI450 Lorenz 2.4mm Locking Reconstruction Plate, low profile. Curved. 2.4mm 8 hole Only to be funded System System. Titanium where used in a service
for which a Medicare Benefit is payable
BI452 Lorenz 2.4mm Locking Reconstruction Plate, Straight, Std or low profile, 2.4mm 16 hole Only to be funded System System, Titanium where used in a service
for which a Medicare Benefit is payable
BI454 Lorenz 2.4mm Locking Reconstruction Plate, Straight, Std or low profile, 2.4mm 8 hole Only to be funded System System, Titanium where used in a service
for which a Medicare Benefit is payable
BI455 Lorenz 2.4mm Locking Reconstruction Plate, Double Angled, 2.4mm System, 5 x (22 or 24) x 5 hole Only to be funded System Titanium where used in a service
for which a Medicare Benefit is payable
BI457 Lorenz 2.4mm Locking Reconstruction Screw, Locking Reconstruction Modular. 2.4 x (6-18)mm Only to be funded System Titanium where used in a service
for which a Medicare Benefit is payable
BI464 Lorenz 2.4mm Locking Reconstruction Screw, Locking Reconstruction Modular. 2.7 x (6-18)mm Only to be funded System Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 510 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI471 Lorenz 2.4mm Locking Reconstruction Screw Head, Plate Locking Modular 2.4mm Only to be funded System where used in a service
for which a Medicare Benefit is payable
BI472 Lorenz Pectus Bar Pectus Bar, Stainless Steel 178-432mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI483 Lorenz Pectus Bar Stabilizer, Triangular or Elongated, One size only Only to be funded Stainless Steel where used in a service
for which a Medicare Benefit is payable
BI485 Distraction Technology System Drive Screw with Flex Connect. Titanium 20 - 30mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI574 Distraction Technology System Distractor, Solid Shaft, Facial, Titanium 1- 2 inch Only to be funded where used in a service for which a Medicare Benefit is payable
BI591 W Lorenz Osteosynthesis System Chin Plates, Paulus, 2mm System, Titanium 4 - 12mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI603 W Lorenz Osteosynthesis System Sheet, 1mm System Titanium 202x127x0.2mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI604 W Lorenz Osteosynthesis System Sheet, 1mm System. Titanium 85x50x0.2mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI605 W Lorenz Osteosynthesis System Plate, Matrix, 1.5mm System, Titanium 2 x 3 or 2 x 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI617 W Lorenz Osteosynthesis System Plate, Straight, 1mm System. Titanium 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 511 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI620 W Lorenz Osteosynthesis System Plate, Straight, low profile, 2.0mm 4 - 8 hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI621 W Lorenz Osteosynthesis System Plate, L , 2.5mm or 2m system, Titanium 2 x2 or 3x3 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI622 W Lorenz Osteosynthesis System Z-Shape Plate, Left or Right, 1.5mm or 2 x 2 hole Only to be funded 2mm System. Titanium where used in a service
for which a Medicare Benefit is payable
BI623 W Lorenz Osteosynthesis System T-Plate, Left or Right, 1.5mm System. 3x3 hole, 7x7 hole Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI624 W Lorenz Osteosynthesis System T-Plate 90 degrees, Left or Right, 2mm 2x5hole, 3x3hole, 2x3hole Only to be funded System. Titanium where used in a service
for which a Medicare Benefit is payable
BI625 W Lorenz Osteosynthesis System Plate, Y, Double Y, X, 1.5mm System or One size only Only to be funded 2.0mm System, Titanium where used in a service
for which a Medicare Benefit is payable
BI627 W Lorenz Osteosynthesis System Plate, Straight, 1.5mm System, Titanium 4 or 6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI628 W Lorenz Osteosynthesis System Plate, Straight, 1.5mm System or 2mm 16 hole Only to be funded System. Titanium where used in a service
for which a Medicare Benefit is payable
BI629 W Lorenz Osteosynthesis System Plate Straight, 1.0mm, 1.5mm, 2.0mm 24 hole Only to be funded System, Titanium where used in a service
for which a Medicare Benefit is payable
BI631 W Lorenz Osteosynthesis System L Plate, Left or Right, 1mm System. 5x3 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 512 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI633 W Lorenz Osteosynthesis System T Plate 90 degrees, 1mm System, Titanium 5 hole, Regular Only to be funded where used in a service for which a Medicare Benefit is payable
BI635 W Lorenz Osteosynthesis System Plate, DoubleT, Double Y; 1mm, 2mm 6,7,11 hole Only to be funded system, Titanium where used in a service
for which a Medicare Benefit is payable
BI636 W Lorenz Osteosynthesis System Plate, Y-Shape, 1mm System, 2mm Regular, medium, long, xlong, nasal. 6 Only to be funded System .Titanium where used in a service
for which a Medicare Benefit is payable
BI638 W Lorenz Osteosynthesis System Plate, Orbital. 1mm System, Titanium One size only Only to be funded where used in a service for which a Medicare Benefit is payable
BI639 W Lorenz Osteosynthesis System Plate, Square. 1mm System. Titanium 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI640 W Lorenz Osteosynthesis System Plate, Matrix. 1mm System. Titanium 2 x 3 hole Only to be funded where used in a service for which a Medicare Benefit is payable
BI641 W Lorenz Osteosynthesis System Plate, Matrix. 1mm System, 1.5mm 2 x 4 hole Only to be funded System. Titanium where used in a service
for which a Medicare Benefit is payable
BI644 W Lorenz Osteosynthesis System Mesh panel, 1mm System. Titanium 83 x 51mm x 0.6mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI645 W Lorenz Osteosynthesis System Mesh panel. 1.5mm System Titanium 83 x 51mm x 0.3mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI656 W Lorenz Osteosynthesis System Plate, Orbital; 1.5mm, 2.0mm System; 6 or 8 hole Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 513 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI658 W Lorenz Osteosynthesis System Plate, Orbital. 1.5mm System, 2mm 10 hole Only to be funded System. Titanium where used in a service
for which a Medicare Benefit is payable
BI660 W Lorenz Osteosynthesis System Plate, H-Shape, 1.5mm System, Titanium One size only Only to be funded where used in a service for which a Medicare Benefit is payable
BI662 W Lorenz Osteosynthesis System Mesh Panel, 1.5mm System. Titanium Small (85x53x0.6mm) Only to be funded where used in a service for which a Medicare Benefit is payable
BI666 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 1.5mm x (3.5 - 15) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI671 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 1.8mm x (3.5 - 7) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI677 W Lorenz Osteosynthesis System Plate, Neuro Straight, 1.5mm System, 2 hole (medium or long) Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI681 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 1.0mm x (2 - 7) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI684 W Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 1.2mm x (3 - 5) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI733 W.Lorenz Osteosynthesis System Bone Screw, Self Drilling, Cross Drive, 1.5 mm (dia) x 6.0, 7.0mm [lengths] Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
BI734 W.Lorenz Osteosynthesis System Bone Screw, Self Drilling, Cross Drive, 1.5 mm (dia) x 3.5, 4.0, 5.0mm, Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 514 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI735 W.Lorenz Osteosynthesis System Bone Screw, Cross or Centre Drive; 2.3mm x (5 - 9) mm Only to be funded where used in a service for which a Medicare Benefit is payable
BI738 W.Lorenz Osteosynthesis System Orbital Floor Plate; Titanium 1.5mm system, Large Only to be funded where used in a service for which a Medicare Benefit is payable
BI739 W.Lorenz Osteosynthesis System Orbital Floor Plate; Titanium 1.5mm system, Medium Only to be funded where used in a service for which a Medicare Benefit is payable
BI740 W.Lorenz Osteosynthesis System Orbital Floor Plate (Small) or NOE plate, Small or NOE plate Only to be funded 1.5mm System, Titanium where used in a service
for which a Medicare Benefit is payable
BI774 W Lorenz Osteosynthesis System Lefort plate, 1.5mm system, 0.6mm Flat, 2-11mm Only to be funded thickness, titanium where used in a service
for which a Medicare Benefit is payable.
BI784 Lorenz 2.4mm Locking Reconstruction Condyle screw, titanium One size only Only to be funded System where used in a service
for which a Medicare Benefit is payable.
BI786 Lorenz 2.4mm Locking Reconstruction Screw, bending inserts, titanium One size only Only to be funded System where used in a service
for which a Medicare Benefit is payable.
BI792 Lorenz 2.4mm Locking Reconstruction Condyle left or right, chrome cobalt One size only Only to be funded System where used in a service
for which a Medicare Benefit is payable.
Branemark Osseointegration Centre Australia Pty Ltd T/A Boca MedicalBR001 OPRA System Central screw - titanium One size only Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 515 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BR002 OPRA System Healing cylinder - titanium One size only Only to be funded where used in a service for which a Medicare Benefit is payable
BR003 OPRA System Healing screw - titanium One size only Only to be funded where used in a service for which a Medicare Benefit is payable
BR004 OPRA System Fixture - titanium 16 - 20mm Only to be funded where used in a service for which a Medicare Benefit is payable
BR005 OPRA System Abutment - titanium Length 47 - 77mm Only to be funded where used in a service for which a Medicare Benefit is payable
BR006 OPRA System Abutment screw - titanium Length 57 - 87mm Only to be funded where used in a service for which a Medicare Benefit is payable
Medical & Optical Instruments Australia Pty LtdMO001 Titan Mesh Mesh Panel, Titanium Thickness 0.1mm, 0.2mm, 0.3mm, 0.6mm Only to be funded
where used in a service for which a Medicare Benefit is payable
MO002 Martin Mandibular Fracture System Plate Straight, Titanium 8 to 16 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO003 Martin Mandibular Fracture System Plate Angled - left and right, Titanium 5 + 8 hole to 5 + 16 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO004 Martin Mandibular Fracture System Total Mandible, Titanium 5 + 17 + 5 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 516 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO007 Champy Maxillo-Facial Osteosynthesis L Plate Titanium 4 to 10 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO009 Champy Maxillo-Facial Osteosynthesis Orbital Plate Titanium 8 - 12 Hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO011 Champy Maxillo-Facial Osteosynthesis Multi Fragment Plate Titanium 4 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO012 Champy Maxillo-Facial Osteosynthesis Sagittal Split Plate Titanium 4 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO013 Champy Maxillo-Facial Osteosynthesis Straight Plate Titanium 4 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO014 Champy Maxillo-Facial Osteosynthesis Straight Plate Titanium 6 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO015 Champy Maxillo-Facial Osteosynthesis Straight Plate Titanium 8 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO016 Champy Maxillo-Facial Osteosynthesis Straight Plate Titanium 16 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO017 Champy Maxillo-Facial Osteosynthesis T Plate, Double T Plate Titanium 4 to 6 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
MO018 Champy Maxillo-Facial Osteosynthesis Y Plate, Double Y Plate Titanium 4 to 6 hole Only to be funded System where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 517 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO023 Martin Microplate Osteosynthesis System Lindorf Plate 0 to11mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO024 Martin Mandibular Fracture System Condylar Implant - left or right 5cm Only to be funded where used in a service for which a Medicare Benefit is payable
MO028 Martin Mandibular Fracture System Screw Titanium 2.7mm diameter, 5 to 12mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO029 Martin Mandibular Fracture System Screw Titanium 2.7mm diameter, 14 to 16mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO030 Martin Mandibular Fracture System Screw Titanium 2.7mm diameter, 18 to 20mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO033 Martin Mandibular Fracture System Screw Titanium 2.7mm diameter, 22 - 30mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO038 Martin Mandibular Fracture System Screw Titanium 2.3mm diameter, 5 - 13mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO041 Martin Mandibular Fracture System Screw Titanium 2.3mm diameter, 14 - 32mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO044 Martin Mandibular Fracture System Screw Titanium 2.5mm diameter, 9 - 17mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO045 Martin Mandibular Fracture System Straight Plate Titanium 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 518 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO046 Martin Mandibular Fracture System Straight Plate Titanium 6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO047 Martin Mandibular Fracture System Straight Plate Titanium 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO048 Martin Mandibular Fracture System Straight Plate Titanium 16 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO049 Martin Mandibular Fracture System Angled Plate Titanium 6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO050 Martin Mandibular Fracture System Angled Plate Titanium 8 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO051 Martin Mandibular Fracture System Curved Plate Titanium 4 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO052 Martin Miniplate Osteosynthesis System L Plate Titanium 4 to 6 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO053 Martin Miniplate Osteosynthesis System Multi Fragment 4 to 8 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO054 Martin Miniplate Osteosynthesis System Straight Plate Titanium 2 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO055 Martin Miniplate Osteosynthesis System Straight Plate Titanium 4 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 519 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO056 Martin Miniplate Osteosynthesis System Straight Plate Titanium 6 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO057 Martin Miniplate Osteosynthesis System Straight Plate Titanium 8 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO058 Martin Miniplate Osteosynthesis System Straight Plate Titanium 16 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO059 Martin Miniplate Osteosynthesis System H & Y Plate 4 to 6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
MO060 Martin Miniplate Osteosynthesis System T Plate Titanium 4 to 6 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO062 Martin Miniplate Osteosynthesis System X Plate Titanium 6 hole, 1mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO069 Martin Miniplate Osteosynthesis System Screw Titanium 2mm diameter, 4 to 10mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO070 Martin Miniplate Osteosynthesis System Screw Titanium 2mm diameter, 11 - 14mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO071 Martin Miniplate Osteosynthesis System Screw Titanium 2mm diameter, 15 to 19mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO072 Martin Miniplate Osteosynthesis System Screw Drill Free Titanium 2mm diameter, 5 to 7mm length Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 520 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO073 Martin Miniplate Osteosynthesis System Straight Plate Low Profile Titanium 2 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO074 Martin Miniplate Osteosynthesis System Straight Plate Low Profile Titanium 4 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO075 Martin Miniplate Osteosynthesis System Straight Plate Low Profile Titanium 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO076 Martin Miniplate Osteosynthesis System Straight Plate Low Profile Titanium 8 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO077 Martin Miniplate Osteosynthesis System Straight Plate Low Profile Titanium 16 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO080 Martin Miniplate Osteosynthesis System L, H, T, Low Profile Plate Titanium 4 to 7 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO081 Martin Miniplate Osteosynthesis System Y Plate Low Profile Titanium 4 to 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO082 Martin Miniplate Osteosynthesis System Multi Fragment Plate Low Profile 10 to 12 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO083 Martin Miniplate Osteosynthesis System Z Plate Low Profile Titanium 4 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO084 Martin Miniplate Osteosynthesis System Orbital Plate Low Profile Titanium 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 521 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO085 Martin Miniplate Osteosynthesis System Orbital Plate Low Profile Titanium 8 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO086 Martin Miniplate Osteosynthesis System Burr Hole Cover 12 to 17mm , 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO087 Martin Miniplate Osteosynthesis System Chin Plate Titanium 2 to 8mm, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO088 Martin Miniplate Osteosynthesis System Chin Plate Titanium 10 to14mm, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO090 Martin Micro Plate Osteosynthesis 1mm Screw System Titanium 1mm diameter, 2-4mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO092 Martin Micro Plate Osteosynthesis 1mm Screw System Titanium 1mm diameter, 5 - 6mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO093 Martin Micro Plate Osteosynthesis 1mm system, Screw Titanium 1mm diameter, 7mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO094 Martin Micro Plate Osteosynthesis 1mm system, Screw Emergency 1.2mm diameter,3 to 5mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO095 Martin Micro Plate Osteosynthesis 1mm system, Straight Plate Titanium 4 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO096 Martin Micro Plate Osteosynthesis 1mm system, Straight Plate Titanium 8 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 522 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO097 Martin Micro Plate Osteosynthesis 1mm system, Straight Plate Titanium 12 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO098 Martin Micro Plate Osteosynthesis 1mm system, Straight Plate Titanium 16 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO099 Martin Micro Plate Osteosynthesis 1mm system, Straight Plate Titanium 24 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO100 Martin Micro Plate Osteosynthesis 1mm system, Orbital Plate Titanium 8 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO101 Martin Micro Plate Osteosynthesis 1mm System L, T, Y, Double Y Plate 5 to 8 hole 0.6mm profile Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
MO103 Martin Micro Plate Osteosynthesis 1mm system, H Plate Titanium 11 hole 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO105 Martin Micro Plate Osteosynthesis 1mm system, Burr Hole Cover Titanium 12 to 15mm, 0.3 - 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO106 Martin Micro Plate Osteosynthesis 1mm system, Burr Hole Cover Titanium 17 to 20mm, 0.3 - 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO107 Martin Micro Plate Osteosynthesis 1.5mm system L, Double L Plate 4 to 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO108 Martin Micro Plate Osteosynthesis 1.5mm system Orbital Plate Titanium 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 523 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO109 Martin Micro Plate Osteosynthesis 1.5mm system Orbital Plate Titanium 8 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO110 Martin Micro Plate Osteosynthesis 1.5mm system Orbital Plate Titanium 10 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO111 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 2 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO112 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 4 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO113 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO114 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 8 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO115 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 16 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO116 Martin Micro Plate Osteosynthesis 1.5mm system Straight Plate Titanium 20 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO117 Martin Micro Plate Osteosynthesis 1.5mm system T Plate Titanium 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO118 Martin Micro Plate Osteosynthesis 1.5mm system Y Plate Titanium 5 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 524 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO119 Martin Micro Plate Osteosynthesis 1.5mm system H Plate Titanium 12 - 32 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO120 Martin Micro Plate Osteosynthesis 1.5mm system X Plate Titanium 4 to 6 hole, 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO121 Martin Micro Plate Osteosynthesis 1.5mm system Burr Hole Cover Titanium 12 to 22mm, 0.3 - 0.6mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
MO122 Martin Micro Plate Osteosynthesis 1.5mm Screw Titanium 1.5mm diameter, 3.5 to 8mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO123 Martin Micro Plate Osteosynthesis 1.5mm Screw Titanium 1.5mm diameter, 9mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO124 Martin Micro Plate Osteosynthesis 1.5mm Screw Titanium 1.5mm diameter, 11 to 13mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO125 Martin Micro Plate Osteosynthesis 1.5mm Screw Titanium 1.5mm diameter, 15mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO126 Martin Micro Plate Osteosynthesis 1.5mm Screw Emergency Titanium 1.8mm diameter, 3 to 7mm length Only to be funded where used in a service for which a Medicare Benefit is payable
MO127 Titan Mesh Mesh Sheet Titanium 13 hole 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO128 Titan Mesh Mesh Plates Titanium 2 hole strip 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 525 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO129 Titan Mesh Mesh Plates Titanium 1 x 2 holes 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO130 Titan Mesh Mesh Plates Titanium 2 x 2 holes 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO131 Titan Mesh Mesh Plates Titanium 3 x 2 holes 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO132 Titan Mesh Mesh Plates Titanium 4 x 2 holes 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO133 Titan Mesh Mesh Plates Titanium 6 x 4 holes 1, 1.5, 2mm Only to be funded where used in a service for which a Medicare Benefit is payable
MO197 Titan Mesh Orbital Floor Plate (Martin) Titan mesh - contoured orbital floor 1.5mm 0.3 profile; 6 hole large/ 5 hole Only to be funded repair mesh plate where used in a service
for which a Medicare Benefit is payable
MO198 Titan Mesh (Martin) Mesh panel - titanium 4 x 2 hole mesh plate; 1.0, 1.5 and Only to be funded 2.0mm dia, 0.6 and 1.0 profile where used in a service
for which a Medicare Benefit is payable
MO199 Martin Mandibular Fracture System Insert spacer screw, titanium 2.7 x 3mm Only to be funded where used in a service for which a Medicare Benefit is payable.
Medtronic Sofamor Danek Australia Pty LtdSD143 TiMesh Maxillary Prosthesis One size only Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 526 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD144 TiMesh Full Mandible One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD145 TiMesh Mandibular Angle, Left/Right One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD146 TiMesh Hemimandible, Left/Right One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD147 TiMesh Mandibular Symphysis One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD148 TiMesh Mandibular "J" Plate One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD149 TiMesh Titanium Mesh Panel 121 x 72mm - 125 x 125mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD150 TiMesh Squareplate 4 holes x 1mm - 4 holes x 2.2mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD151 TiMesh X Plate 4 holes x 1mm - 4 holes x 2.2mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD152 TiMesh Naso-Orbital-Ethmoid 1mm - 2.2mm; Complex 1, Complex 2, Only to be funded Complex 3 where used in a service
for which a Medicare Benefit is payable
SD153 TiMesh Curved Plate: Standard, Rigid, Left, Right 1mm x 12 holes Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 527 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD154 TiMesh Square-rectangular Gridmesh Panel 1.0 x 4mm - 2.2 x 4mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD155 TiMesh Isogrid Panel One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD156 TiMesh Sugar Mesh Panel / Grid 11 x 7.5cm Only to be funded where used in a service for which a Medicare Benefit is payable
SD157 TiMesh Surgical Mesh: Anterior, Posterior, One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD158 TiMesh Lateral Mesh: Left, Right One size only Only to be funded where used in a service for which a Medicare Benefit is payable
SD159 TiMesh Cranial Custom Mesh 121mm x 72mm - 152 x 152mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD206 Timesh 12 Point Screws 3 - 20mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD207 Timesh Internal Drive Screws 3 - 6mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD208 Timesh Rescue Screws 3 - 7mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD209 Timesh X-Drive Screws 2 - 15mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 528 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SD210 Timesh Rigid Straight Plates 1-20 Hole Only to be funded where used in a service for which a Medicare Benefit is payable
SD211 Timesh Double Y Plates 3 Hole - 2.5mm - 7mm Only to be funded where used in a service for which a Medicare Benefit is payable
SD258 TiMesh Titanium Rigid Fixation Bone FlexMesh 1.0mm system. Composition: 113mm x 77mm, 0.3mm. 113mm x Only to be funded Grafting and Plating System Titanium 77mm, 0.6mm. where used in a service
for which a Medicare Benefit is payable
SD259 TiMesh Titanium Rigid Fixation Bone FlexMesh 1.5mm System 148mm x 148mm, 0.6mm Only to be funded Grafting and Plating System where used in a service
for which a Medicare Benefit is payable
SD260 TiMesh Titanium Rigid Fixation Bone FlexMesh 1.5mm System. Composition: 50mm x 56mm, 0.3mm. 50mm x 56mm, Only to be funded Grafting and Plating System Titanium 0.6mm where used in a service
for which a Medicare Benefit is payable
SD261 TiMesh Titanium Rigid Fixation Bone FlexMesh 1.5mm System. Composition: 113mm x 77mm, 0.3mm. 113mm x Only to be funded Grafting and Plating System Titanium 77mm, 0.6mm where used in a service
for which a Medicare Benefit is payable
SD262 TiMesh Titanium Rigid Fixation Bone FlexMesh 2.2mm System. Composition: 114mm x 82mm, 0.6mm Only to be funded Grafting and Plating System Titanium. where used in a service
for which a Medicare Benefit is payable
SD263 TiMesh Titanium Rigid Fixation Bone FlexMesh 2.2mm System. Composition: 154mm x 154mm, 0.6mm Only to be funded Grafting and Plating System Titanium. where used in a service
for which a Medicare Benefit is payable
SD264 Modified Dual TiMesh TiMesh Surgical Mesh Modified, includes 121mm x 77mm. 152mm x 152mm. Only to be funded two cranial plates. Composition: where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 529 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
National Surgical Corporation Pty LtdNI031 Medicon Ti Plates, Medicon Hein1 Mini Plates TitaniumPlate - double-T. .4mm - 2mm thickness X 5mm - 80mm, Only to be funded
Plates and Screws, Medicon Hein1 Micro TitaniumPlate - Nasal. TitaniumPlate - up 16 holes. where used in a service Plates and Screws, Medicon Salyer CMS Mandibular Angle. TitaniumPlate - for which a Medicare System, Osteosynthesis system for Hand Orbital. TitaniumPlate - Str. Benefit is payable Surgery Compression. Titanium, Chin.
TitaniumPositioning plates. Titanium, 4-Hole Compression Plate, 6-Hole Plate & T Plate, 4- 12 hole plates std and
NI032 Medicon Ti Plates and Screws Plates Titanium Plates, L-plate Plates, Medium .5mm thickness X 4 - 12 holes Only to be funded Orbital 6-Hole Compression, 7-Hole where used in a service Compression Plate, "Y12-Hole Plate for which a Medicare "FIR", Condylar Bone Plate, 6-Hole Benefit is payable
NI033 Medicon Ti Plates and Screws Plates Titanium Mini, .6mm thickness X 4 - 6 hole Only to be funded where used in a service for which a Medicare Benefit is payable
NI044 Medicon Ti Mesh Mesh, Titanium Small/Medium, .5mm thick X 8mm to Only to be funded 180mm wide or long. where used in a service
for which a Medicare Benefit is payable
NI048 Medicon Ti Mesh Mesh, Titanium Small, .5mm thickness X 5mm to 180mm Only to be funded wide or long where used in a service
for which a Medicare Benefit is payable
NI051 Medicon Hein1 Mini Plates and Screws Mesh Performing, Titanium 0.2mm Thickness, 75 x 180mm Only to be funded where used in a service for which a Medicare Benefit is payable
NI079 Medicon Ti Plates Plates Titanium, Straight, angled L & R. Mini/Large, 2mm thick X 135mm - Only to be funded 180mm to 11 holes. where used in a service
for which a Medicare Benefit is payable
NI080 Medicon Leipzig Mandibular Plates and Angled Plates Left and Right, Titanium 165mm, 2mm Thickness Only to be funded Screws where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 530 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
NI082 Medicon Ti Plates Plates Titanium, Total Reconstruction Extra Large, 2mm thick X 100mm - Only to be funded where used in a service for which a Medicare Benefit is payable
NI083 Medicon Leipzig Mandibular Plates and Condylar Implants: Short & Long. Titanium 40mm-48mm Only to be funded Screws where used in a service
for which a Medicare Benefit is payable
NI087 Medicon Ti Plates Plates Titanium, Angled Plates Left and Medium/Large, 1.7mm - 2mm thick X Only to be funded Right, Straight and Fracture. 105mm - 160mm to 16 holes. where used in a service
for which a Medicare Benefit is payable
NI102 Medicon Ti Plates Plates Titanium, straight, fracture, Double Medium/Small, .4mm - 2mm thick X 3 - Only to be funded 16 hole, To 100mm length. where used in a service
for which a Medicare Benefit is payable
NI103 Medicon Ti Plates and Screws Plates Titanium, L-plate. T-short. Mini/Small, .4mm - 1mm thickness x 4 Only to be funded hole and or 8mm - 15mm where used in a service
for which a Medicare Benefit is payable
NI112 Medicon Ti Plates Plates Titanium, Straight; Std, short and Micro/Medium, .5mm - 2mm thick X 4 Only to be funded long Angled; Orbital, Fracture, Double Y hole - 6 hole, 12mm - 120mm length where used in a service
for which a Medicare Benefit is payable
NI114 Medicon Ti Mesh Mesh, Titanium, Mesh Plates, Medium, .1mm - .5mm thick X 2mm to Only to be funded 180mm wide or long. where used in a service
for which a Medicare Benefit is payable
NI115 Medicon Ti Mesh Mesh, Titanium, Mesh Plates Mini, .1mm - .5mm thick X 4mm to Only to be funded 180mm wide or long. where used in a service
for which a Medicare Benefit is payable
NI118 Medicon Ti Plates Plates Titanium, Osteosynthesis, Vario, Mini/Medium, .4mm - 1.7mm thick X 4 - Only to be funded Fracture, L, T ,Y H, Double Y Plates. 16 holes, 8mm - 12mm where used in a service
for which a Medicare Benefit is payable
NI121 Medicon Ti Screws Screws Titanium Mini/Small, .9mm - 2.7mm thick X 2mm Only to be funded - 17mm. where used in a service
for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 531 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
NI123 Medicon Ti Screws Bone Screws, Titanium, Condylar. Small/Medium, 2.7 - 6mm dia X 7mm - Only to be funded 23mm length where used in a service
for which a Medicare Benefit is payable.
NI126 Medicon Ti Screws Screws Titanium, Ti-Washers for Small, 1.2 - 2.7mm dia X 2.7 - 17mm Only to be funded where used in a service for which a Medicare Benefit is payable.
Surgiplas MedicalSP013 Plates Micro, Midface & Mini Micro: Y Plate, Y Plate 11 Hole, H Plate, Only to be funded
5 Hole Straight Plate, Quad Plate, Quad where used in a service Plate - Short, 13mm & 16mm L Plate - for which a Medicare Left & Right, 19mm T Plate, X Plate, Benefit is payableStraight 2 Hole Short/Medium/Long; Mini: 10mm Square Plate; Midface: 13mm, 15mm & 22mm L Plate - Left & Right, 9mm & 11mm ZED Plate - Left & Right, 4 Hole I Plate, 18mm 4 Hole Straight Plate, Straight 2 Hole - Short/Medium/Long
SP014 Plates Micro, Midface, Mini, BSSO, TR BSSO Micro: 18 Hole Straight Plate, 12 Hole Only to be funded Curved Plate, 10 Hole Straight Plate, where used in a service Calvarium Plate - Small & Large, Medium for which a Medicare 2 x 4 Hole Quad Plate, 4 & 6 Hole Benefit is payableStraight Plate, 2 x 3 Hole Quad Plate; Mini: Calvarium Plate, X Plate, 8 Hole Straight Plate, 1.0mm Thick; Midface: 15mm 5 Hole Y Plate, 10 Hole Curved Plate, Double Y Plate, Straight Plate 5 & 10 Hole; 4 Hole BSSO Plate Short, Medium, Long; TR BSSO Plate, Short, Long;
SP015 Plates Micro, Mini, Maxi Micro: Mesh 50mm x 37mm; Mini: 16 Only to be funded Hole Straight Plate, 1.0mm thick; Maxi: where used in a service 33mm & 38mm 4 Hole EDC Plate, 48mm for which a Medicare 6 Hole EDC Plate, Angled EDC Plate, Benefit is payableAngled Long EDC Plate, 40mm 6 Hole Fracture Plate, 6 Hole Curved EDC Plate; Gap Plates; Quad Plates; Burr Hole Plates;
SP016 Plates Micro, Mini Micro: Mesh Sheet 100mm x 74mm, Only to be funded Orbital Plate, Orbital Plate Large; Mini: 40 where used in a service Hole Straight Plate, Mesh 18 row; Mesh for which a Medicare 36 x 50mm; Sub-Temporal Plates; Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 532 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SP017 Plates Mini Mini: 15mm, 18mm & 23mm L Plate Only to be funded Right & Left, 26mm Y Plate, Y Plate - 13 where used in a service Hole, 15mm & 20mm Z Plate Right & for which a Medicare Left, 24mm Straight Plate, 16mm I Plate, Benefit is payable22mm T Plate, Mesh 1 Row, 4 & 6 Hole Straight Plate 1.0mm thick, Rigid 15mm, 18mm & 23mm L Plate Right & Left, Rigid 26mm Y Plate, 15mm & 20mm Z Plate Right & Left, Rigid 24mm Straight Plate, Rigid 16mm I Plate; Rigid Double Y Plate;
SP018 Plates Micro, Midface, Mini & Maxi Micro: 8 Hole Straight Plate, Double Y Only to be funded Plate; Mini : 10 Hole Straight Plate, where used in a service Extended Y Plate, 4 Hole Compression for which a Medicare Plate, Rigid 10 Hole Straight Plate; Benefit is payableMidface: 12 Hole Straight Plate; Maxi: Chin Plate 4, 6, 8, 10 & 12mm;
SP019 Plates Mini & Maxi Mini: 16 & 18 Hole Straight Plate, 5 Hole Only to be funded Compression Plate, 5, 7 & 9 Hole Curved where used in a service Plate, 12 Hole Straight Plate 1.0mm for which a Medicare thick; Maxi: 33mm 4 Hole semi-comp Benefit is payablePlate, 28mm 4 Hole Fracture Plate; Burr
SP020 Plates Maxi Maxi: Angled Reconstruction Left & Only to be funded Right, Straight Reconstruction where used in a service
for which a Medicare Benefit is payable
SP023 OsteoMed Plating & Fixation System Plates - Reconstruction 4 x 12 Hole plate Right & Left; 14 & 18 Only to be funded Hole Straight Plate where used in a service
for which a Medicare Benefit is payable.
SP024 OsteoMed Plating & Fixation System Plates - Reconstruction 5 x 16 Hole plate Right & Left Only to be funded where used in a service for which a Medicare Benefit is payable.
SP025 OsteoMed Plating & Fixation System Plates - Reconstruction 5 x 20 x 5 Hole Full Mandible Plate; 5 x Only to be funded 16 x 5 Hole Full Mandible Plate; where used in a service Osteoform Mesh Malleable/Rigid, 74 x for which a Medicare 50mm, 111 x 191mm, 74 x 50mm, Benefit is payable.
SP026 OsteoMed Plating & Fixation System Plates - Fracture Rigid Comminuted Fracture Plate Only to be funded where used in a service for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 533 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SP027 OsteoMed Plating & Fixation System Plates - Fracture 8 Hole Fracture Plate Only to be funded where used in a service for which a Medicare Benefit is payable.
SP028 OsteoMed Plating & Fixation System Plates - Fracture 4 hole Fracture Plate 32 -37mm; EDC Only to be funded Plate 32mm & 34mm where used in a service
for which a Medicare Benefit is payable.
SP029 OsteoMed Plating & Fixation System Plates - Fracture; Screws - Cannulated Lag 6 Hole Fracture Plate 47 - 52mm; 2 x 2 Only to be funded Hole Angled Fracture Plate; 3 x 3 Hole where used in a service Angled Fracture Plate; 6.5mm x (30 - for which a Medicare 150)mm; 7.3mm x (30 - 150)mm Benefit is payable.
SP030 OsteoMed Plating & Fixation System Screws 2.4mm x (6 - 22)mm Locking Screws, Only to be funded locking screw inserts; Quick-Fix MMF / where used in a service Anchorage Screws 1.2 / 1.6 / 2.0mm for which a Medicare
Benefit is payable.
SP031 OsteoMed Plating & Fixation System Lag Screws - Micro, Mini 1.2mm x (6 - 16)mm; 2.0mm x (8 - Only to be funded where used in a service for which a Medicare Benefit is payable.
SP032 OsteoMed Plating & Fixation System Lag Screws - Maxi, MMF, 3.0mm 2.4mm x (8 - 42)mm; 2.4 x (12 - Only to be funded 18)mm; 3.0mm x (12 - 36)mm; where used in a service
for which a Medicare Benefit is payable.
SP033 OsteoMed Plating & Fixation System Compression Plates - Micro, Mini & Maxi Micro: 2 x 3 Hole Compression T Plate, Only to be funded Oblique Left & Right Compression T where used in a service Plate, 4 Hole Straight Compression Plate; for which a Medicare 5 Hole Straight Plate, 13mm Left & Right Benefit is payable. L Plate, 19mm T Plate, 2 x 3 Hole Quad Plate; Mini: 4 Hole Left & Right L Plate, 4 Hole Left & Right Oblique L Plate, 2 x 4 T Plate, Left & Right Oblique 2 x 4 Hole T Plate, 3 x 4 T Plate, 2 x 1 x 4 T Plate, 3 x 4 Hole Y Plate, 4, 5 & 6 Hole Straight Plate; Maxi: 4 Hole Left & Right L Plate, 2 x 4 Hole T Plate, 2 x 4 Hole Left & Right Oblique T Plate; Flap Fixation Disk Plate.
SP034 OsteoMed Plating & Fixation System Compression Plates - Maxi Maxi: 4, 5 & 6 Hole Straight Plate Only to be funded where used in a service for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 534 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SP035 OsteoMed Plating & Fixation System Screws - Cannulated Lag 2.0mm x (6 - 16)mm; 2.4mm x (6 - Only to be funded where used in a service for which a Medicare Benefit is payable.
SP036 OsteoMed Plating & Fixation System Screws - Cannulated Lag 2.0mm x (18 - 22)mm; 2.4mm x (22 - Only to be funded where used in a service for which a Medicare Benefit is payable.
SP037 OsteoMed Plating & Fixation System Screws - Cannulated Lag 3.0mm x (10 x 28)mm; 4.0mm x (12 - Only to be funded where used in a service for which a Medicare Benefit is payable.
SP038 OsteoMed Plating & Fixation System Screws - Cannulated Lag 3.0mm x (30 x 40)mm; 4.0mm x (32 - Only to be funded where used in a service for which a Medicare Benefit is payable.
Orthopedic Internal Fixation Systems, Spinal
Medtronic Sofamor Danek Australia Pty LtdSD015 TiMesh Rigid Fixation Bone Grafting and Titanium, Square Grid Mesh Large Only to be funded
Plating System where used in a service for which a Medicare Benefit is payable
SD016 TiMesh Rigid Fixation Bone Grafting and Titanium, Square Grid Mesh Medium Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
SD017 TiMesh Rigid Fixation Bone Grafting and Titanium, Square Grid Mesh Small Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 535 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Pins, Bone, Absorbable
B Braun Australia Pty LtdBB028 Isosorb Mandibular Screw Absorbable, Lactic acid base 3.5mm diameter, 14mm-20mm length Only to be funded
where used in a service for which a Medicare Benefit is payable
Plates, Absorbable
Linvatec AustraliaLV030 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 & 2.0 System Plate - 1.0 & 1.2mm thick x 5.5mm wide x 4 Only to be funded
Scalloped where used in a service for which a Medicare Benefit is payable
LV031 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 & 2.0 System Plate - 1.0, 1.2mm thick x 5.5mm wide x 4 Hole Only to be funded Scalloped, Straight x 8mm,10mm Gap, 1.2mm thick x where used in a service
5.5mm wide x 6 Hole for which a Medicare Benefit is payable
LV032 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 & 2.0 System Plate - 1.0mm thick x 5.5mm wide x 6 Hole x Only to be funded Straight & C Plate 10mm Gap, 1.2mm thick x 5.5mm wide where used in a service
for which a Medicare Benefit is payable
LV033 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 System Plate - Scalloped 1.0mm thick x 5.5mm wide x 6 Hole Only to be funded where used in a service for which a Medicare Benefit is payable
LV034 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 & 2.0 System Plate - L 1.0 & 1.2mm thick x 5.5mm wide x 7 Only to be funded Plate Left & Right, Scalloped or Straight Hole x 12mm Gap, 16 Hole Straight where used in a service
for which a Medicare Benefit is payable
LV035 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 & 2.0 System Plate - L 1.0mm thick x 5.5mm wide x 7 Hole x Only to be funded Plate Left & Right 6mm Gap, 1.2mm thick x 5.5mm wide x where used in a service
7 Hole x 7mm Gap for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 536 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LV036 Bionx Implants - Plates, Absorbable Biosorb FX 2.0 System Plate - Straight 1.2mm thick x 5.5mm wide x 8 Hole Only to be funded where used in a service for which a Medicare Benefit is payable
LV037 Bionx Implants - Plates, Absorbable Biosorb FX 2.0 System Plate - Straight 1.2mm thick x 5.5mm wide x 6 Hole x Only to be funded 8mm Gap where used in a service
for which a Medicare Benefit is payable
LV038 Bionx Implants - Plates, Absorbable Biosorb FX 2.0 System Plate - C Plate 1.2mm thick x 5.5mm wide x 6 Hole x Only to be funded 8mm Gap where used in a service
for which a Medicare Benefit is payable
LV039 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 System Plate - Scalloped 1.0mm thick x 5.5mm wide x 6 Hole Only to be funded C Plate where used in a service
for which a Medicare Benefit is payable
LV040 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 System Plate - Scalloped 1.0mm thick x 5.5mm wide x 6 Hole x Only to be funded C Plate, X Plate 8mm Gap, 1.0mm thick x 5.5mm wide x where used in a service
for which a Medicare Benefit is payable
LV041 Bionx Implants - Plates, Absorbable Biosorb FX 1.5 System Plate - Scalloped 1.0mm thick x 5.5mm wide x 6 Hole x Only to be funded C Plate 10mm Gap where used in a service
for which a Medicare Benefit is payable
LV042 Bionx Implants - Plates, Absorbable Biosorb FX 2.4 System Plate - Straight 2.4mm thick x 8mm wide x 4 and 6 Hole Only to be funded where used in a service for which a Medicare Benefit is payable
LV043 Bionx Implants - Plates, Absorbable Biosorb FX 2.4 System Plate - Straight 1.4mm thick x 8mm wide x 6 Hole x 8 & Only to be funded 12mm Gap where used in a service
for which a Medicare Benefit is payable
LV044 Bionx Implants - Plates, Absorbable Biosorb FX 2.4 System Plate - Straight 1.4mm thick x 8mm wide x 8 & 10 Hole Only to be funded where used in a service for which a Medicare Benefit is payable
LV068 Bionx Implants - plates Biosorb system mesh plate 0.6mm and 0.8mm thick, 10 hole by 5 Only to be funded hole configuration where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 537 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LV069 Bionx Implants - plates Biosorb system mesh plate 0.6mm and 0.8mm thick, 5 hole by 5 hole Only to be funded configuration where used in a service
for which a Medicare Benefit is payable
LV070 Bionx Implants - plates Biosorb system mesh plate 0.6mm and 0.8mm thick, 10 hole by 10 Only to be funded hole configuration where used in a service
for which a Medicare Benefit is payable
LV082 BioSorb PDX Mesh Self-reinforced PLGA 20 x 20 holes, 0.6mm thick Only to be funded where used in a service for which a Medicare Benefit is payable
Medical & Optical Instruments Australia Pty LtdMO185 Resorb-X Plates Resorb-X Osteosynthesis System, 4 - 8 hole Only to be funded
Resorbable straight plate where used in a service for which a Medicare Benefit is payable
MO186 Resorb-X Plates Resorb-X Osteosynthesis System, L, Y, X, T, Orbital Only to be funded Resorbable shaped plate where used in a service
for which a Medicare Benefit is payable
MO187 Resorb-X Mesh Plate 25 x 25mm Resorb-X Osteosynthesis System, 25 x 25mm - 0.3, 0.6, 1.0mm profile Only to be funded Resorbable mesh plate where used in a service
for which a Medicare Benefit is payable
MO188 Resorb-X Mesh Plate 50 x 50mm Resorb-X Osteosynthesis System, 50 x 50mm - 0.3, 0.6, 1.0mm profile Only to be funded Resorbable mesh plate where used in a service
for which a Medicare Benefit is payable
MO203 Resorb-X Plates Resorb-X Osteosynthesis System, 29 to 31 x 104 to 106mm Mesh Plate Only to be funded Resorbable Mesh Plate where used in a service
for which a Medicare Benefit is payable
MO204 Resorb-X Plates Resorb-X Osteosynthesis System, 125 x 125mm Only to be funded Resorbable Mesh Plate where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 538 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MO205 Resorb-X Plates Resorb-X Osteosynthesis System, 55mm diameter Only to be funded Resorbable Mesh Plate where used in a service
for which a Medicare Benefit is payable
MO206 Resorb-X Plates Resorb-X Osteosynthesis System, 22 Hole - Straight Resorbable Plate Only to be funded Resorbable Straight Plate where used in a service
for which a Medicare Benefit is payable
MO207 Resorb-X Plates Resorb-X Osteosynthesis System, Y-Plate, Wood Style Only to be funded Resorbable Y-Plate where used in a service
for which a Medicare Benefit is payable
MO231 Resorb X Plates Various Sizes Resorb Osteosynthesis System resorbable 11 x 126mm Only to be funded mesh plate where used in a service
for which a Medicare Benefit is payable
Plates, Bone
Aus Systems Pty LtdAU002 Aus Systems Titanium Miniplates (Bone Low profile 2 & 4 hole Short, medium, long Only to be funded
Plates) where used in a service for which a Medicare Benefit is payable
AU005 Aus Systems Titanium Miniplates (Bone Low profile condensed 8 hole Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU006 Aus Systems Titanium Miniplates (Bone Low profile 19 hole Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU007 Aus Systems Titanium Miniplates (Bone Low profile pre-shaped - Square, T, L, Y, Short, medium, Long, 4 & 5 hole Only to be funded Plates) Y Double & X where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 539 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AU014 Aus Systems Titanium Miniplates (Bone Low profile burr hole cover 10mm, 14mm, 18mm, 22mm Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU018 Aus Systems Titanium Miniplates (Bone Strip plates, Titanium (M10 series) 1mm profile, 4 holes Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU019 Aus Systems Titanium Miniplates (Bone 16 & 19 hole 0.7mm & 1mm profile Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU022 Aus Systems Titanium Miniplates (Bone Pre-shaped - L Small, Medium, Long Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU055 Aus Systems Titanium Miniplates (Bone Pre-shaped - T, T Double, Y Small, Medium, Long, 4 & 5 hole Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
AU056 Aus Systems Titanium Miniplates (Bone Pre-shaped - Y Double Small, Medium, Long Only to be funded Plates) where used in a service
for which a Medicare Benefit is payable
Johnson & Johnson Medical Pty LtdJJ204 Bioplate Bone Plate Titanium cranial fixation system - straight 1.5mm diam, 11mm length; pack of 5 Only to be funded
plate, 2 hole where used in a service for which a Medicare Benefit is payable
JJ205 Bioplate Bone Plate Titanium cranial fixation system - straight 1.5mm diam, 19mm length Only to be funded plate, 4 hole where used in a service
for which a Medicare Benefit is payable
JJ206 Bioplate Bone Plate Titanium cranial fixation system - Y plate, 1.5mm diam, 17mm length Only to be funded 5 hole where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 540 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ207 Bioplate Bone Plate Titanium cranial fixation system - X plate, 1.5mm diam, 17mm length Only to be funded 6 hole where used in a service
for which a Medicare Benefit is payable
JJ208 Bioplate Bone Plate Titanium cranial fixation system - T plate, 1.5mm diam, 15mm length Only to be funded 5 hole where used in a service
for which a Medicare Benefit is payable
JJ211 Bioplate Bone Plate Titanium cranial fixation system - box 1.5mm diam, 10 x 10mm Only to be funded car, 4 hole where used in a service
for which a Medicare Benefit is payable
JJ212 Bioplate Bone Plate Titanium cranial fixation system - box car 1.5mm diam, 8 x 17mm Only to be funded 6 hole where used in a service
for which a Medicare Benefit is payable
JJ213 Bioplate Bone Plate Titanium cranial fixation system - box 1.5mm diam, 10 x 24mm Only to be funded car, 8 hole where used in a service
for which a Medicare Benefit is payable
JJ214 Bioplate Bone Plate Titanium mesh for cranial fixation 1.5mm diam, 32 x 44mm Only to be funded system, 48 holes where used in a service
for which a Medicare Benefit is payable
JJ216 Bioplate Bio-100 Plate Titanium cranial fixation system, 2 hole 1.5mm diam; pack of 5 Only to be funded where used in a service for which a Medicare Benefit is payable
Mathys AustraliaMA386 AO/ASIF Facio-Maxillary Plates Flapfix - Plates for fixation of cranial 10 - 20mm Only to be funded
bone flaps where used in a service for which a Medicare Benefit is payable.
Medical & Optical Instruments Australia Pty LtdMO210 Martin Mandibular Fracture System Pre-Formed Titanium Mandibular 2.3mm angled, symphysis and straight Only to be funded
Reconstruction Plate plate; 12-27 holes where used in a service for which a Medicare benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 541 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medtronic Sofamor Danek Australia Pty LtdSD001 TiMesh Rigid Fixation Bone Grafting and Titanium, Universal Plate 12h Only to be funded
Plating System where used in a service for which a Medicare Benefit is payable
SD002 TiMesh Rigid Fixation Bone Grafting and Titanium, Plate Mesh, Fan blades 11 - 18mm, Ohata 8.4 - Only to be funded Plating System 10mm where used in a service
for which a Medicare Benefit is payable
SD011 TiMesh Rigid Fixation Bone Grafting and Titanium, Y Plate Double and Single 5 - 8 hole Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
SD013 TiMesh Rigid Fixation Bone Grafting and Titanium, Straight Plate 2 - 20 hole Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
SD014 TiMesh Rigid Fixation Bone Grafting and Titanium, T Plate 4 - 8 hole Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
SD019 TiMesh Rigid Fixation Bone Grafting and Titanium, L Plate (Left and right 4 - 10 hole Only to be funded Plating System configurations) where used in a service
for which a Medicare Benefit is payable
SD020 TiMesh Rigid Fixation Bone Grafting and Titanium, H Plate 6 - 11 hole Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
SD021 TiMesh Rigid Fixation Bone Grafting and Titanium, Z Plate Left and Right 4 hole - 5mm, 9.5mm Only to be funded Plating System where used in a service
for which a Medicare Benefit is payable
Stryker Australia Pty LtdSK129 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Compression Plate, 4- Only to be funded
Universal Mandible Compression Plate fixation of mandibular fractures and 6 Holes where used in a service for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 542 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK130 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Fracture Plate, 14 Only to be funded Universal Mandible Fracture Plate fixation of mandibular fractures and where used in a service
for which a Medicare Benefit is payable.
SK131 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Fracture Plate, C- Only to be funded Universal Mandible Fracture Plate fixation of mandibular fractures and shaped, 4 holes where used in a service
for which a Medicare Benefit is payable.
SK132 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Fracture Plate, Angled Only to be funded Universal Mandible Fracture Plate fixation of mandibular fractures and Shaped, 6 holes, 115-140 deg where used in a service
for which a Medicare Benefit is payable.
SK133 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Fracture Plate, 4-6 Only to be funded Universal Mandible Fracture Plate fixation of mandibular fractures and holes with/without Bar where used in a service
for which a Medicare Benefit is payable.
SK134 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Mini Plate, 4-6 holes Only to be funded Universal Mandible Mini Plate fixation of mandibular fractures and with/without Bar where used in a service
for which a Medicare Benefit is payable.
SK135 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Mini Plate, 16 holes Only to be funded Universal Mandible Mini Plate fixation of mandibular fractures and where used in a service
for which a Medicare Benefit is payable.
SK136 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Primary Only to be funded Universal Mandible Primary fixation of mandibular fractures and Reconstruction Plate, (Hemi) Left and where used in a service Reconstruction Plate Right 5+17 holes, with template for which a Medicare
Benefit is payable.
SK137 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Primary Only to be funded Universal Mandible Primary fixation of mandibular fractures and Reconstruction Plate, 11-17 holes, with where used in a service Reconstruction Plate for which a Medicare
Benefit is payable.
SK138 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Reconstruction Plate, Only to be funded Universal Mandible Reconstruction Plate fixation of mandibular fractures and (Full), 6 + 13 + 6 holes, with template where used in a service
for which a Medicare Benefit is payable.
SK139 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible 3D Plate, (Full), 6 x 2 Only to be funded Universal Mandible 3D Plate fixation of mandibular fractures and Hole, Curved, Square where used in a service
for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 543 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK140 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Reconstruction Plate, Only to be funded Universal Mandible Reconstruction Plate fixation of mandibular fractures and 11 - 17 holes, straight with template where used in a service
for which a Medicare Benefit is payable.
SK141 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Reconstruction Plate, Only to be funded Universal Mandible Reconstruction Plate fixation of mandibular fractures and (Hemi), Right and Left, 6 + 17 holes with where used in a service
template for which a Medicare Benefit is payable.
SK142 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Reconstruction Plate, Only to be funded Universal Mandible Reconstruction Plate fixation of mandibular fractures and (Full), 6 + 17 + 6 holes, with template where used in a service
for which a Medicare Benefit is payable.
SK143 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Reconstruction Plate, Only to be funded Universal Mandible Reconstruction Plate fixation of mandibular fractures and (Full), 6 + 15 + 6 holes, with template where used in a service
for which a Medicare Benefit is payable.
SK144 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible 3D Plate, 4 x 2 Hole Only to be funded Universal Mandible 3D Plate fixation of mandibular fractures and Square where used in a service
for which a Medicare Benefit is payable.
SK145 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible 3D Plate, 3 x 2 Hole Only to be funded Universal Mandible 3D Plate fixation of mandibular fractures and Rectangle where used in a service
for which a Medicare Benefit is payable.
SK146 Leibinger Titanium Implant System - Items used for reconstruction and Universal Mandible Bi-concave Washer Only to be funded Universal Mandible Biconcave Washer fixation of mandibular fractures and where used in a service
for which a Medicare Benefit is payable.
SK218 Leibinger Titanium Implant System - Items used for reconstruction following Universal Mandible Condylar Device Left Only to be funded Universal Mandible Condylar Device trauma or tumor resection of the and Right where used in a service
mandible. Included are 2x cross pin for which a Medicare Benefit is payable.
SK240 Leibinger Titanium Implant System - Included are Cross Pin Fixation Screws One Size Only Only to be funded Universal Mandible 3D Condylar Device & Backing Plate where used in a service
for which a Medicare Benefit is payable
SK255 Leibinger Titanium Implant System - Upperface Fixation Plates 24 Hole Straight Plate Upperface, Only to be funded Universal CMF Plate malleable condensed; 24 Hole Straight where used in a service
for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 544 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK257 Leibinger Titanium Implant System - Upperface Fixation Plates 18 Hole Straight, Upperface, Malleable Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable.
SK258 Leibinger Titanium Implant System - Upperface Fixation Plates 10 Hole Curved Plate Upperface, Only to be funded Universal CMF Plate malleable condensed; 10 hole Curved where used in a service
for which a medicare Benefit is payable
SK259 Leibinger Titanium Implant System - Upperface Fixation Plates 7 Hole Double Y Plate Upperface, Only to be funded Universal CMF Plate malleable; 7 Hole Double Y Plate, where used in a service
for which a Medicare Benefit is payable
SK260 Leibinger Titanium Implant System - Upperface Fixation Plates 2x2 Hole 3-D Plate Upperface, malleable; Only to be funded Universal CMF Plate 2x2 Hole 3-D Plate, Upperface where used in a service
for which a Medicare Benefit is payable
SK261 Leibinger Titanium Implant System - Upperface Fixation Plates 6x2 Hole 3-D Plate Upperface, malleable; Only to be funded Universal CMF Plate 6x2 Hole 3-D Plate, Upperface where used in a service
for which a Medicare Benefit is payable
SK262 Leibinger Titanium Implant System - Uppeface Fixation Plates 8 Hole L Plate 90 Degree Left, Upperface; Only to be funded Universal CMF Plate 8 Hole L Plate 90 Degree Right, where used in a service
for which a Medicare Benefit is payable
SK263 Leibinger Titanium Implant System - Upperface Fixation Plates 7 Hole T Plate, Upperface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK264 Leibinger Titanium Implant System - Upperface Fixation Plates 4 Hole Orbita Plate, Upperface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK265 Leibinger Titanium Implant System - Upperface Fixation Plates 6x6 Hole 3-D Plate, Upperface; 6x6 Hole Only to be funded Universal CMF Plate 3-D Plate Upperface, malleable where used in a service
for which a Medicare Benefit is payable
SK266 Leibinger Titanium Implant System - Upperface Fixation Plates 10x10 Hole 3-D plate Upperface, Only to be funded Universal CMF Plate malleable; 10x10 Hole 3-D plate, where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 545 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK267 Leibinger Titanium Implant System - Upperface Fixation Plates 1.2 Malleable Burr Hole Cover Plate 7, 10, Only to be funded Universal CMF Plate 14, 20mm where used in a service
for which a Medicare Benefit is payable
SK268 Leibinger Titanium Implant System - Upperface Fixation Plates 1.2 Burr Hole Cover Plate 7, 10, 14mm Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK269 Leibinger Titanium Implant System - Midface Fixation Plates 24 Hole Straight Plate Midface, malleable Only to be funded Universal CMF Plate condensed; 20 Hole Straight Plate where used in a service
Midface, malleable; 24 Hole Straight Plate for which a Medicare Benefit is payable
SK270 Leibinger Titanium Implant System - Midface Fixation Plates 4 Hole Straight Plate with Bar, Midface; 4 Only to be funded Universal CMF Plate Hole Curved Plate with Bar, Midface where used in a service
for which a Medicare Benefit is payable
SK271 Leibinger Titanium Implant System - Midface Fixation Plates 10 Hole Curved Plate, Midface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK272 Leibinger Titanium Implant System - Midface Fixation Plates 5 Hole T Plate, Midface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK273 Leibinger Titanium Implant System - Midface Fixation Plates 5 Hole Y Plate with 4mm Bar, Midface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK274 Leibinger Titanium Implant System - Midface Fixation Plates 7 Hole Double Y Plate, Midface Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK275 Leibinger Titanium Implant System - Malleable L Plates 5 Hole L Plate 2mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 5 Hole L Plate where used in a service
2mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK276 Leibinger Titanium Implant System - Malleable L Plates 5 Hole L Plate 5mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 5 Hole L Plate where used in a service
5mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 546 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK277 Leibinger Titanium Implant System - Malleable L Plates 6 Hole L Plate 8mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 6 Hole L Plate where used in a service
8mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK278 Leibinger Titanium Implant System - Malleable L Plates 6 Hole L Plate 12mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 6 Hole L Plate where used in a service
12mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK279 Leibinger Titanium Implant System - Standard L Plates 5 Hole L Plate 2mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 5 Hole L Plate where used in a service
2mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK280 Leibinger Titanium Implant System - Standard L Plates 5 Hole L Plate 5mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 5 Hole L Plate where used in a service
5mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK281 Leibinger Titanium Implant System - Standard L Plates 6 Hole L Plate 8mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 6 Hole L Plate where used in a service
8mm Advancement 100 degree Right, for which a Medicare Benefit is payable
SK282 Leibinger Titanium Implant System - Standard L Plates 6 Hole L Plate 12mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface; 6 Hole L Plate where used in a service
12mm Advancement 100 Degree Right, for which a Medicare Benefit is payable
SK283 Leibinger Titanium Implant System - Graduated Stability L Plates 5 Hole L Plate 2mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface, GSP; 5 Hole L where used in a service
Plate 2mm Advancement 100 Degree for which a Medicare Right, Midface, GSP Benefit is payable
SK284 Leibinger Titanium Implant System - Graduated Stability L Plates 5 Hole L Plate 5mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface, GSP; 5 Hole L where used in a service
Plate 5mm Advancement 100 Degree for which a Medicare Right, Midface, GSP Benefit is payable
SK285 Leibinger Titanium Implant System - Graduated Stability L Plates 6 Hole L Plate 8mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface, GSP; 6 Hole L where used in a service
Plate 8mm Advancement 100 Degree for which a Medicare Right, Midface, GSP Benefit is payable
SK286 Leibinger Titanium Implant System - Graduated Stability L Plates 6 Hole L Plate 12mm Advancement 100 Only to be funded Universal CMF Plate Degree Left, Midface, GSP; 6 Hole L where used in a service
Plate 12mm Advancement 100 Degree for which a Medicare Right, Midface, GSP Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 547 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK287 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 16 Hole Straight Plate, Midface, locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK288 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 8 Hole Curved Plate, Midface, locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK289 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 2x2 Hole 3-D Plate, Midface, Locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK290 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 2x6 Hole 3-D Plate, Midface, Locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK291 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 5 Hole Y Plate with 4mm Bar, Midface, Only to be funded Universal CMF Plate Locking; 5 Hole Y Plate with 8mm Bar, where used in a service
Midface, locking for which a Medicare Benefit is payable
SK292 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 7 Hole Double Y Plate, Midface, locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK293 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 8 Hole Y Plate, Midface, locking Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK294 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 5 Hole L Plate 2mm Advancement, Only to be funded Universal CMF Plate Midface, locking; 5 Hole L Plate 5mm where used in a service
Advancement, Midface, locking for which a Medicare Benefit is payable
SK295 Leibinger Titanium Implant System - Mid-Face Fixation Plates, Locking 6 Hole L Plate 8mm Advancement, Only to be funded Universal CMF Plate Midface, locking; 6 Hole L-Plate 12mm where used in a service
Advancement, Midface, locking for which a Medicare Benefit is payable
SK296 Leibinger Titanium Implant System - Mandible Plates 4 hole 2.3mm Compression Plate; 6 Hole Only to be funded Universal CMF Plate 2.3mm Compression Plate where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 548 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK297 Leibinger Titanium Implant System - Mandible Plates 16 Hole, Straight Plate, Locking, Only to be funded Universal CMF Plate where used in a service
for which a Medicare Benefit is payable
SK298 Leibinger Titanium Implant System - Mandible Plates 4-6 Hole, Straight Plate, with/without bar, Only to be funded Universal CMF Plate locking where used in a service
for which a Medicare Benefit is payable
SK340 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 4 hole Z Plate, Small, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Left, Midface GSP. Universal CMF 4 hole where used in a service
fractures or osteotomy performed for Z Plate, Small Right, Midface GSP for which a Medicare correction of facial deformity Benefit is payable
SK341 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 4 hole Z Plate, Large, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Left, Midface GSP. Universal CMF 4 hole where used in a service
fractures or osteotomy performed for Z Plate, Large, Right, Midface GSP for which a Medicare correction of facial deformity Benefit is payable
SK342 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 11 hole Le Fort 1 Plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial 0mm Advancement, Left. Universal CMF where used in a service
fractures or osteotomy performed for 11 hole Le Fort 1 Plate, 0mm for which a Medicare correction of facial deformity Benefit is payable
SK343 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 11 hole Le Fort 1 Plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial 3mm Advancement, Left. Universal CMF where used in a service
fractures or osteotomy performed for 11 hole Le Fort 1 Plate, 3mm for which a Medicare correction of facial deformity Benefit is payable
SK344 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 11 hole Le Fort 1 Plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial 4mm Advancement, Left. Universal CMF where used in a service
fractures or osteotomy performed for 11 hole Le Fort 1 Plate, 4mm for which a Medicare correction of facial deformity Benefit is payable
SK345 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF Plate 11 hole Le Fort 1 Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Plate, 6mm Advancement, Left. Universal where used in a service
fractures or osteotomy performed for CMF Plate 11 hole Le Fort 1 Plate, 6mm for which a Medicare correction of facial deformity Advancement, Right Benefit is payable
SK346 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 11 hole Le Fort 1 Plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial 8mm Advancement, Left. Universal CMF where used in a service
fractures or osteotomy performed for Plate 11 hole Le Fort 1 Plate, 8mm for which a Medicare correction of facial deformity Advancement, Right Benefit is payable
SK347 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 11 hole Le Fort 1 Plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial 10mm Advancement, Left. Universal where used in a service
fractures or osteotomy performed for CMF 11 hole Le Fort 1 Plate, 10mm for which a Medicare correction of facial deformity Advancement, Right Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 549 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK348 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 4 hole chin plate, 4mm. Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Universal CMF 4 hole chin plate, 6mm. where used in a service
fractures or osteotomy performed for Universal CMF 4 hole chin plate, 8mm. for which a Medicare correction of facial deformity Universal CMF 4 hole chin plate, 10mm. Benefit is payable
Universal CMF 4 hole chin plate, 12mm.
SK349 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 4 hole Z plate, Small, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Orthognathic, locking. Universal CMF 4 where used in a service
fractures or osteotomy performed for hole Z plate, Large, Orthognathic, locking. for which a Medicare correction of facial deformity Benefit is payable
SK350 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 6 hole curved Sagittal Only to be funded Universal CMF Plates and fixation of craniomaxillofacial Split plate, 6mm bar, locking where used in a service
fractures or osteotomy performed for for which a Medicare correction of facial deformity Benefit is payable
SK351 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 6 hole curved Sagittal Only to be funded Universal CMF Plates and fixation of craniomaxillofacial Split plate, 12mm bar, locking. Universal where used in a service
fractures or osteotomy performed for CMF 6 hole straight, Sagittal Split plate, for which a Medicare correction of facial deformity 12mm bar, locking. Benefit is payable
SK352 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF 4 hole straight, Sagittal Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Split plate, 6mm bar, locking where used in a service
fractures or osteotomy performed for for which a Medicare correction of facial deformity Benefit is payable
SK353 Leibinger Titanium Implant System - Titanium plates used for reconstruction Universal CMF Sliding Sagittal Split plate, Only to be funded Universal CMF Plate and fixation of craniomaxillofacial Small, locking. Universal CMF Sliding where used in a service
fractures or osteotomy performed for Sagittal Split plate, Large, locking. for which a Medicare correction of facial deformity Benefit is payable
SK354 Universal Neuro Titanium Viper Self- Titanium self-drilling screws used for the Diameter 1.5mm, Length 4 & 5 mm Only to be funded Drilling Screws fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK355 Universal Neuro Titanium Low Profile Titanium Low Profile plates used for the Small and large Only to be funded Gap Plates fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK356 Universal Neuro Titanium Low Profile X- Titanium Low Profile plates used for the 2-hole plate, 12mm bar Only to be funded tra Rigid 2-hole plate, 12mm bar fixation of cranial bone plates where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 550 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK357 Universal Neuro Titanium Low Profile 2- Titanium Low Profile plates used for the 2-hole plate, 12mm bar with tab Only to be funded hole plate, 12mm bar with tab fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK358 Universal Neuro Titanium Low Profile Titanium Low Profile plates used for the 6 hole, 8mm Only to be funded Double Y Plate, 6 hole, 8mm fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK359 Universal Neuro Titanium Low Profile Titanium Low Profile plates used for the 7-20mm, with tab Only to be funded Burr Hole Cover fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK360 Universal Neuro Titanium Low Profile 2- Titanium Low Profile plates used for the 2-hole plate, 16mm bar Only to be funded hole plate, 16mm bar fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK361 Universal Neuro Titanium Low Profile 2 x Titanium Low Profile plates used for the 2 x 2 Box Plate Only to be funded 2 Box Plate fixation of cranial bone flaps where used in a service
for which a Medicare Benefit is payable
SK362 Universal Neuro Screws Titanium screws used for the fixation of Diameter 1.5mm, length 4-6mm. Only to be funded cranial bone flaps Emergency Screws: Diameter 1.7mm, where used in a service
for which a Medicare Benefit is payable
SK363 Universal Neuro Titanium Low Profile Titanium Low Profile plates used for the 8 hole plate without bar. 16 hole plate Only to be funded Titanium Plates, 4-16 hole plates fixation of cranial bone flaps without bar. 4 hole plate, with 6mm bar. where used in a service with/without bar for which a Medicare
Benefit is payable
SK389 Universal System Condylar Prosthesis Left/RightSK394 Universal CMF Double Strip Plate Standard or Malleable 2x34 hole Only to be funded
where used in a service for which a Medicare Benefit is payable
ST076 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 4 holes Only to be funded mini bone plate Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 551 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST077 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 6 holes Only to be funded mini bone plate Titanium where used in a service
for which a Medicare Benefit is payable
ST078 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 16 holes Only to be funded mini bone plate Titanium where used in a service
for which a Medicare Benefit is payable
ST079 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 5 holes Only to be funded mini compression plate Titanium where used in a service
for which a Medicare Benefit is payable
ST080 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 4x2 holes Only to be funded mini 3D plate Titanium where used in a service
for which a Medicare Benefit is payable
ST081 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.0mm, 3x2 holes Only to be funded mini 3D plate Titanium where used in a service
for which a Medicare Benefit is payable
ST086 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded straight plate, short where used in a service
for which a Medicare Benefit is payable
ST087 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded straight plate, medium Titanium where used in a service
for which a Medicare Benefit is payable
ST088 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded straight plate, long Titanium where used in a service
for which a Medicare Benefit is payable
ST089 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x6 holes Only to be funded straight plate, short Titanium where used in a service
for which a Medicare Benefit is payable
ST090 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x6 holes Only to be funded straight plate, medium Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 552 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST091 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x6 holes Only to be funded straight plate, long Titanium where used in a service
for which a Medicare Benefit is payable
ST092 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x8 holes Only to be funded straight plate Titanium where used in a service
for which a Medicare Benefit is payable
ST093 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x14 holes Only to be funded straight plate Titanium where used in a service
for which a Medicare Benefit is payable
ST094 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x6 holes Only to be funded angled plate Titanium where used in a service
for which a Medicare Benefit is payable
ST095 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded C-shape plate Titanium where used in a service
for which a Medicare Benefit is payable
ST096 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded straight EDCP plate, short Titanium where used in a service
for which a Medicare Benefit is payable
ST097 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x4 holes Only to be funded straight EDCP plate, medium Titanium where used in a service
for which a Medicare Benefit is payable
ST098 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.3x6-22mm Only to be funded screws Titanium where used in a service
for which a Medicare Benefit is payable
ST099 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.7mm, 8 holes Only to be funded bridging plate, straight Titanium where used in a service
for which a Medicare Benefit is payable
ST100 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.7mm, 11 holes Only to be funded bridging plate, straight Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 553 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST101 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.7mm, 14 holes Only to be funded bridging plate, straight where used in a service
for which a Medicare Benefit is payable
ST102 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 2.7mm, 17 holes Only to be funded bridging, plate, straight Titanium where used in a service
for which a Medicare Benefit is payable
ST103 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 4+ 8 holes Only to be funded bridging plate, angled, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST104 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 4+ 11 holes Only to be funded bridging plate, angled, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST105 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 4+ 14 holes Only to be funded bridging plate, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST106 Leibinger Titanium Implant System Leibinger COM/MAND Fixation System: 4 + 8 holes Only to be funded bridging plate, right Titanium where used in a service
for which a Medicare Benefit is payable
ST123 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 4 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST124 Leibinger Titanium Implant System Leibinger Bone plate: LEAD plate 4 holes Only to be funded Titanium Transport and base plate where used in a service
for which a Medicare Benefit is payable
ST125 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 6 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST126 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 8 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 554 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST127 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 12 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST128 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 16 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST129 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Straight 24 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST130 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: straight, 5 holes Only to be funded L-shape, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST131 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: straight, 8 holes Only to be funded L-shape, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST132 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: T-shape, 5 holes Only to be funded 90 deg Titanium where used in a service
for which a Medicare Benefit is payable
ST133 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: T-shape, 7 holes Only to be funded 90 deg Titanium where used in a service
for which a Medicare Benefit is payable
ST134 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: double- 7 holes Only to be funded T-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST135 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: double- 9 holes Only to be funded T-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST136 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: double- 14 holes Only to be funded T-shape Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 555 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST137 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: Y-shape 6 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST138 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: double- 6 holes Only to be funded Y-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST139 Leibinger Titanium Implant System Leibinger Micro Plus Bone plate: double- 7holes Only to be funded Y-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST140 Leibinger Titanium Implant System Leibinger Micro, Micro Plus and Low 8 holes Only to be funded Profile Bone plate: orbital plate, curved where used in a service
for which a Medicare Benefit is payable
ST141 Leibinger Titanium Implant System Leibinger Burr Hole Cover: curved 7, 10, 14mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST142 Leibinger Titanium Implant System Leibinger 3D plate Titanium 1.2x2-6mm, 0.55mm height Only to be funded where used in a service for which a Medicare Benefit is payable
ST143 Leibinger Titanium Implant System Leibinger 3D plate Titanium 1.2x7-10mm, 0.55mm height Only to be funded where used in a service for which a Medicare Benefit is payable
ST144 Leibinger Titanium Implant System Leibinger 3D plate Titanium 1.2x11-12mm, 0.55mm height Only to be funded where used in a service for which a Medicare Benefit is payable
ST151 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 4 holes, 0.55mm height Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST152 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: with 4 holes, 6mm, 8mm, 10mm bar, 0.55mm Only to be funded bar Titanium height where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 556 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST153 Leibinger Titanium Implant System Leibinger Steinhauser plate: long with bar 4 holes, 0.55mm height Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST154 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 6 holes, 0.55mm height Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST155 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone Plate: with 6 holes, 12mm, 0.55mm height Only to be funded bar Titanium where used in a service
for which a Medicare Benefit is payable
ST156 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 8 holes, 0.55mm height Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST157 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 16 holes, 0.55mm height Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST158 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 30 holes, 6mm bar, 0.55mm height Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST159 Leibinger Titanium Implant System LeibingerSteinhauser plate: regular Titanium 30 holes, 6mm bar, 0.55mm height Only to be funded where used in a service for which a Medicare Benefit is payable
ST160 Leibinger Titanium Implant System Leibinger Mini Bone plate: regular, L- 4 holes, 0.55mm height Only to be funded shape, 90 deg, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST161 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 holes, 6mm bar, 0.55mm height Only to be funded shape, 90 deg, with bar, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST162 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 holes, 8mm bar, 0.55mm height Only to be funded shape, 90 deg, with bar, right/left Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 557 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST163 Leibinger Titanium Implant System Leibinger Steinhauser plate: L-shape, 5 holes, 8mm bar, 0.55mm height Only to be funded right/left, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST164 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 holes, 10mm bar, 0.55mm height Only to be funded shape, 90 deg, with bar, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST165 Leibinger Titanium Implant System Leibinger Steinhauser plate: L-shape, 7 holes, 10mm bar, 0.55mm height Only to be funded right/left, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST166 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 5 holes, 12mm bar, 0.55mm height Only to be funded shape, 90 deg, with bar, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST167 Leibinger Titanium Implant System Leibinger Steinhauser plate: L-shape, 9 holes, 12mm bar, 0.55mm height Only to be funded right/left, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST168 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: T- 4 holes, 8mm bar, 0.55mm height Only to be funded shape, narrow, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST169 Leibinger Titanium Implant System Leibinger Steinhauser plate: T-shape, with 4 holes, 8mm bar, 0.55mm height Only to be funded bar Titanium where used in a service
for which a Medicare Benefit is payable
ST170 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: T- 4 holes, with 12mm bar, 0.55mm height Only to be funded shape, narrow, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST171 Leibinger Titanium Implant System Leibinger Steinhauser plate: T-shape, with 8 holes, 12mm bar, 0.55mm height Only to be funded bar Titanium where used in a service
for which a Medicare Benefit is payable
ST172 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 6 holes, 0.55mm height Only to be funded regular, T-shape Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 558 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST173 Leibinger Titanium Implant System Leibinger Mini Wurzburg Flexplate: 6 holes, 0.55mm height Only to be funded regular, T-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST174 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: T- 5 holes, 10mm bar, 0.55mm height Only to be funded shape, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST175 Leibinger Titanium Implant System Non-compression Hand plate: regular, T- 5 holes, 10mm bar, 0.55mm height Only to be funded shape, 70 right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST176 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 6 holes, 0.55mm height Only to be funded double-T-shape, narrow Titanium where used in a service
for which a Medicare Benefit is payable
ST177 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 5 holes, 0.55mm height Only to be funded regular, Y-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST178 Leibinger Titanium Implant System Non-compression Hand plate: regular, Y- 5 holes, 0.55mm height Only to be funded shape, short, long where used in a service
for which a Medicare Benefit is payable
ST179 Leibinger Titanium Implant System Non-compression Hand plate: regular, Y- 5 holes, 0.55mm height Only to be funded shape, long, regular where used in a service
for which a Medicare Benefit is payable
ST180 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: Y- 5 holes, 8mm bar, 0.55mm height Only to be funded shape, with bar where used in a service
for which a Medicare Benefit is payable
ST181 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: Y- 5 holes, 12mm bar, 0.55mm height Only to be funded shape, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST182 Leibinger Titanium Implant System Leibinger Steinhauser plate: Y- 5 holes, 12mm bar, 0.55mm height Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 559 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST183 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 6 holes, 0.55mm height Only to be funded double-Y-shape, regular Titanium where used in a service
for which a Medicare Benefit is payable
ST184 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 6 holes, 8mm bar, 0.55mm height Only to be funded double-Y-shape, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST185 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 7 holes, 0.55mm height Only to be funded double-Y-shape, regular Titanium where used in a service
for which a Medicare Benefit is payable
ST186 Leibinger Titanium Implant System Leibinger Steinhauser plate: double-Y- 7 holes, 0.55mm height Only to be funded shape, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST187 Leibinger Titanium Implant System Leibinger E-Z Flap Bone Fixation plate 1.7mm for 7mm, 10mm, 14mm burr Only to be funded Titanium holes, 2.0mm for 7mm, 10mm burr where used in a service
holes, 0.55mm height for which a Medicare Benefit is payable
ST188 Leibinger Titanium Implant System Leibinger Mini Wurzburg Orbita Bone 4 holes, 6mm bar, 0.55mm height Only to be funded plate: curved, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST189 Leibinger Titanium Implant System Leibinger Mini Wurzburg Orbita Bone 6 holes, 8mm bar, 0.55mm height Only to be funded plate: curved, with bar Titanium where used in a service
for which a Medicare Benefit is payable
ST190 Leibinger Titanium Implant System LeibingerSteinhauser Orbita Bone plate: 6 holes, 0.55mm height Only to be funded curved Titanium where used in a service
for which a Medicare Benefit is payable
ST191 Leibinger Titanium Implant System Leibinger Mini Wurzburg Orbita Bone 8 holes, 0.55mm height Only to be funded plate: curved Titanium where used in a service
for which a Medicare Benefit is payable
ST192 Leibinger Titanium Implant System Leibinger Steinhauser Orbita Bone plate: 8 holes, 0.55mm height Only to be funded curved Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 560 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST193 Leibinger Titanium Implant System Leibinger Mini Wurzburg Orbita Bone 10 holes, 0.55mm height Only to be funded plate: curved Titanium where used in a service
for which a Medicare Benefit is payable
ST194 Leibinger Titanium Implant System Leibinger Steinhauser Orbita Bone plate: 10 holes, 0.55mm height Only to be funded curved Titanium where used in a service
for which a Medicare Benefit is payable
ST195 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 holes, 0.55mm height Only to be funded shape, 110 deg, regular, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST196 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 holes, with 6mm, 8mm, 10mm bar, Only to be funded shape, 110 deg, regular, with bar, 0.55mm height where used in a service right/left Titanium for which a Medicare
Benefit is payable
ST197 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: L- 4 & 5 holes, with 12mm bar, 0.55mm Only to be funded shape, 110 deg, regular, with bar, where used in a service right/left Titanium for which a Medicare
Benefit is payable
ST198 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Bone plate: 2x2 holes, 0.55mm height Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST199 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Bone plate: 3x2 holes, 0.55mm height Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST200 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Bone plate: 4x2 holes, 0.55mm height Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST201 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Bone plate: 4x4 holes, 0.55mm, 0.55mm height Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST202 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Bone plate: 6x4 holes, 0.55mm height Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 561 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST203 Leibinger Titanium Implant System Leibinger Mini Wurzburg 3D Zygoma 4x2 holes, 0.55mm height Only to be funded Bone plate: rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST204 Leibinger Titanium Implant System Leibinger Mini Wurzburg Bone plate: 2 holes, 0.55mm height Only to be funded straight Titanium where used in a service
for which a Medicare Benefit is payable
ST231 Leibinger Titanium Implant System Leibinger Mini Wurzburg Flexplate: L- 4 holes Only to be funded shape, 110 deg, regular Titanium where used in a service
for which a Medicare Benefit is payable
ST232 Leibinger Titanium Implant System Leibinger Mini Wurzburg Flexplate: L- 4 holes, with 6mm, 8mm, 10mm bar Only to be funded shape, 110 deg, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST233 Leibinger Titanium Implant System Leibinger Mini Wurzburg Flexplate: L- 5 holes, with 12mm bar Only to be funded shape, 110 deg, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST234 Leibinger Titanium Implant System Leibinger Mini Wurzburg Compression 4 holes, with 6 x 1mm bar Only to be funded Bone plate: L-shape, C-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST235 Leibinger Titanium Implant System Leibinger Mini Wurzburg Compression 6 holes, with 8 x 1mm bar Only to be funded Bone plate: L-shape, C-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST245 Leibinger Titanium Implant System Leibinger Mesh Implants Titanium 75 x 12 x 0.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST246 Leibinger Titanium Implant System Leibinger Mesh Implants Titanium 75 x 18 x 0.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST247 Leibinger Titanium Implant System Leibinger Mesh Implants Titanium .75 x 27 x 0.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 562 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST248 Leibinger Titanium Implant System Leibinger Mesh Implants Titanium 132.5 x 82.5 x 0.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST249 Leibinger Titanium Implant System Leibinger Micro Mesh Implants Titanium 0.2 x 60 x 60mm, 0.1 x 60 x 60mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST250 Leibinger Titanium Implant System Leibinger Micro Mesh Implants Titanium 0.1 x 60 x 120mm, 0.2 x 60 x 120mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST251 Leibinger Titanium Implant System Leibinger Micro Mesh Implants Titanium 0.1x120x120mm, 0.2x120x120mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST252 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants 0.3x40x40mm Only to be funded Titanium. To be used with 1 - 1.4mm where used in a service
for which a Medicare Benefit is payable
ST253 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants Titanium 0.3x85x85mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST254 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants 0.3x40x40mm Only to be funded Titanium. To be used with 1.7 - 1.9mm where used in a service
for which a Medicare Benefit is payable
ST255 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants 0.3x90x90mm Only to be funded Titanium. To be used with screw 1.7 - where used in a service
for which a Medicare Benefit is payable
ST256 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants 0.3x40x40mm Only to be funded Titanium. To be used with screw 2 - where used in a service
for which a Medicare Benefit is payable
ST257 Leibinger Titanium Implant System Leibinger Dynamic Mesh Implants 0.3x90x90mm, 0.6x90x90mm Only to be funded Titanium. To be used with screw 1 - where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 563 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST311 Leibinger Titanium Implant System Plate - Leibinger Low Profile 4 holes Only to be funded Osteosynthesis System: mini, non- where used in a service compression / compression, straight, for which a Medicare regular / extended, medium / long Benefit is payable
ST312 Leibinger Titanium Implant System Plate - Leibinger Low Profile 8 holes Only to be funded Osteosynthesis System: mini, non- where used in a service compression, compression, straight, for which a Medicare regular / extended, medium / long Benefit is payable
ST313 Leibinger Titanium Implant System Plate - Leibinger Low Profile 16 holes Only to be funded Osteosynthesis System: mini, non- where used in a service compression, compression, straight, for which a Medicare regular / extended, medium / long Benefit is payable
ST314 Leibinger Titanium Implant System Leibinger Low Profile Osteosynthesis 4 holes Only to be funded System: L-shape, right/left, regular, where used in a service medium, long Titanium for which a Medicare
Benefit is payable
ST315 Leibinger Titanium Implant System Leibinger Low Profile Osteosynthesis 5 holes Only to be funded System: L-shape, right/left, long, where used in a service extended Titanium for which a Medicare
Benefit is payable
ST324 Leibinger Titanium Implant System Leibinger Mandible Burr Hole Cover 1.7x14mm, 1.7x7mm Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST326 Leibinger Titanium Implant System Leibinger Micro 3D Plating System: 2x2 holes, 0.55mm profile Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST327 Leibinger Titanium Implant System Leibinger Micro 3D Plating System: 2x3 holes, 0.55mm profile Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST328 Leibinger Titanium Implant System Leibinger Micro 3D Plating System: 2x4 holes, 0.55mm profile Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST329 Leibinger Titanium Implant System Leibinger Micro 3D Plating System: 4x4 holes, 0.55mm profile Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 564 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST330 Leibinger Titanium Implant System Leibinger Micro 3D Plating System: 4x6 holes, 0.55mm profile Only to be funded square, rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST331 Leibinger Titanium Implant System Leibinger Micro Bone plate Titanium 4 holes, 0.55mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
ST332 Leibinger Titanium Implant System Leibinger Micro Bone plate Titanium 6 holes, 0.55mm profile Only to be funded where used in a service for which a Medicare Benefit is payable
ST333 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: straight 6 holes, 0.55mm profile Only to be funded titanium where used in a service
for which a Medicare Benefit is payable
ST334 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: straight 8 holes, 0.55mm profile Only to be funded titanium where used in a service
for which a Medicare Benefit is payable
ST335 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: straight 16 holes, 0.55mm profile Only to be funded titanium where used in a service
for which a Medicare Benefit is payable
ST336 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: straight 24 holes, 0.55mm profile Only to be funded titanium where used in a service
for which a Medicare Benefit is payable
ST337 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: L- 5 holes, 0.55mm profile Only to be funded shape, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST338 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: L- 8 holes, 0.55mm profile Only to be funded shape, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST339 Leibinger Titanium Implant System Leibinger Low Profile Bone Plate: T- 5, 7, 9 holes, 0.55mm profile Only to be funded shape, double-T-shape, right/left, 90 deg where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 565 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST340 Leibinger Titanium Implant System Leibinger Steinhauser Bone Plate: X-shape 4, 8, 9 holes, 0.55mm profile Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST341 Leibinger Titanium Implant System Leibinger Micro Bone Plate: Y-shape, 6 holes, 0.55mm profile Only to be funded double-Y-shape Titanium where used in a service
for which a Medicare Benefit is payable
ST342 Leibinger Titanium Implant System Leibinger Steinhauser Bone Plate: Y-shape 8 holes, 0.55mm profile Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST343 Leibinger Titanium Implant System Leibinger 3D Plating System: micro 3 holes Only to be funded triangular plate Titanium where used in a service
for which a Medicare Benefit is payable
ST344 Leibinger Titanium Implant System Leibinger 3D Plating System: micro 8 holes Only to be funded circular plate Titanium where used in a service
for which a Medicare Benefit is payable
ST347 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: large One size only Only to be funded mandibular segment, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST348 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: short One size only Only to be funded mandibular segment, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST349 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: angled One size only Only to be funded mandibular segment Titanium where used in a service
for which a Medicare Benefit is payable
ST350 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: chin One size only Only to be funded segment Titanium where used in a service
for which a Medicare Benefit is payable
ST351 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: full One size only Only to be funded mandibular segment Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 566 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST352 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: plain 132.5x82.5x 0.5mm, Only to be funded mesh, mesh with small holes Titanium where used in a service
for which a Medicare Benefit is payable
ST353 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: flat 0.2x120x120mm Only to be funded mesh micro Titanium where used in a service
for which a Medicare Benefit is payable
ST354 Leibinger Titanium Implant System Leibinger Dumbach Mesh System: flat 0.2x60x60mm Only to be funded mesh micro Titanium where used in a service
for which a Medicare Benefit is payable
ST356 Leibinger Titanium Implant System Paulus Chin plate Titanium 2, 4, 6, 8, 10, 12, 14mm bar, 0.6mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST447 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 45 4 holes, 40mm Only to be funded deg plate Titanium where used in a service
for which a Medicare Benefit is payable
ST448 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 45 4 holes, 50mm Only to be funded deg Titanium where used in a service
for which a Medicare Benefit is payable
ST449 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 8 holes, 60mm Only to be funded straight Titanium where used in a service
for which a Medicare Benefit is payable
ST450 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 8 holes, 70mm Only to be funded straight Titanium where used in a service
for which a Medicare Benefit is payable
ST451 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 16 holes, 120mm Only to be funded straight Titanium where used in a service
for which a Medicare Benefit is payable
ST452 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 6 holes Only to be funded angled, 60 deg Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 567 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST476 Wurzburg Bone Plates Wurzburg Mini Bone plate: straight, 4 holes Only to be funded medium/regular/long, with/without bar where used in a service Titanium for which a Medicare
Benefit is payable
ST477 Wurzburg Bone Plates Wurzburg Mini Bone plate: straight, 6 holes Only to be funded regular/long, with/without bar Titanium where used in a service
for which a Medicare Benefit is payable
ST478 Wurzburg Bone Plates Wurzburg Mini Bone plate: straight, long 8 holes Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST479 Wurzburg Bone Plates Wurzburg Mini Bone plate: straight, 16 holes Only to be funded regular Titanium where used in a service
for which a Medicare Benefit is payable
ST480 Wurzburg Bone Plates Wurzburg Mini Bone plate: H and Y- 10, 12 holes Only to be funded shape nasal plate Titanium where used in a service
for which a Medicare Benefit is payable
ST481 Wurzburg Bone Plates Wurzburg Bone plate: double-T-shape, 4, 6 holes Only to be funded with/without bar, 90 deg, regular/short where used in a service Titanium for which a Medicare
Benefit is payable
ST482 Wurzburg Bone Plates Wurzburg Bone plate: double-Y-shape , 6, 8 holes Only to be funded with/without bar, short/long/long where used in a service extended Titanium for which a Medicare
Benefit is payable
ST483 Wurzburg Bone Plates Wurzburg Bone plate: double-Y-shape, no 7 holes Only to be funded bridge Titanium where used in a service
for which a Medicare Benefit is payable
ST484 Wurzburg Bone Plates Wurzburg Bone plate: L-shape, 4 holes Only to be funded regular/long/medium, right/left, where used in a service with/without bar Titanium for which a Medicare
Benefit is payable
ST485 Wurzburg Bone Plates Wurzburg Bone plate: L-shape, long bar/ 5 holes Only to be funded extended long, right/left Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 568 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST486 Wurzburg Bone Plates Wurzburg Bone plate: T-shape, 5, 6 holes Only to be funded with/without bar, 90 deg, regular/long where used in a service
for which a Medicare Benefit is payable
ST487 Wurzburg Bone Plates Wurzburg Bone plate: T-shape, long, 80 5 holes Only to be funded deg, long, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST488 Wurzburg Bone Plates Wurzburg Bone plate: Y-shape plate, 5 holes Only to be funded regular/long Titanium where used in a service
for which a Medicare Benefit is payable
ST489 Wurzburg Bone Plates Wurzburg Bone plate: Z-shape plate, 4 holes Only to be funded 100/110 deg, right/left Titanium where used in a service
for which a Medicare Benefit is payable
ST490 Wurzburg Bone Plates Wurzburg Bone Screws: self-tapping 2x4-19mm, 2.3x7-9mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST491 Wurzburg Bone Plates Leibinger 3D Plating System: square 2x2 holes Only to be funded where used in a service for which a Medicare Benefit is payable
ST492 Wurzburg Bone Plates Leibinger 3D Plating System: rectangular 2x2 holes, 1mm thick Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST493 Wurzburg Bone Plates Leibinger 3D Plating System: square 3x2 holes, 1mm thick Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST494 Wurzburg Bone Plates Leibinger 3D Plating System: square, 4x2 holes, 1mm thick Only to be funded rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST495 Wurzburg Bone Plates Leibinger 3D Plating System: rectangular 4x4 holes, 1mm thick Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 569 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST496 Wurzburg Bone Plates Leibinger 3D Plating System: square, 6x4 holes, 1mm thick Only to be funded rectangular Titanium where used in a service
for which a Medicare Benefit is payable
ST497 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 2 holes Only to be funded Plating System: straight bridging plate where used in a service
for which a Medicare Benefit is payable
ST498 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 3 holes Only to be funded Plating System: straight bridging plate where used in a service
for which a Medicare Benefit is payable
ST499 Wurzburg Bone Plates Wurburg Mandibular Reconstruction 4 holes Only to be funded Plating System: straight bridging plate where used in a service
for which a Medicare Benefit is payable
ST500 Wurzburg Bone Plates Wurburg Mandibular Reconstruction 5 holes Only to be funded Plating System: straight bridging plate where used in a service
for which a Medicare Benefit is payable
ST501 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 6 holes Only to be funded Plating System: straight bridging plate where used in a service
for which a Medicare Benefit is payable
ST502 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 7 holes Only to be funded Plating System: straight Titanium where used in a service
for which a Medicare Benefit is payable
ST503 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 3 holes Only to be funded Plating System: angled bridging plate, where used in a service right/left Titanium for which a Medicare
Benefit is payable
ST504 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 5 holes Only to be funded Plating System: angled bridging plate, where used in a service right/left Titanium for which a Medicare
Benefit is payable
ST505 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 7 holes Only to be funded Plating System: angled bridging plate, where used in a service right/left Titanium for which a Medicare
Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 570 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST506 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 9 holes Only to be funded Plating System: angled bridging plate, where used in a service right/left Titanium for which a Medicare
Benefit is payable
ST507 Wurzburg Bone Plates Wurzburg Mandibular Reconstruction 9 holes Only to be funded Plating System: total mandible bridging where used in a service plate Titanium for which a Medicare
Benefit is payable
ST516 Stryker Leibinger Resorbable Fixation Resorbable plate: blank panel Tripolymer 55x55mm Only to be funded where used in a service for which a Medicare Benefit is payable
ST517 Stryker Leibinger Resorbable Fixation Resorbable plate: box shape Tripolymer 2x2 holes Only to be funded where used in a service for which a Medicare Benefit is payable
ST518 Stryker Leibinger Resorbable Fixation Resorbable plate: curved plate 8 holes Only to be funded where used in a service for which a Medicare Benefit is payable
ST519 Stryker Leibinger Resorbable Fixation Resorbable plate: L-shape plate, 110 deg, 7 holes Only to be funded right/left Tripoymer where used in a service
for which a Medicare Benefit is payable
ST520 Stryker Leibinger Resorbable Fixation Resorbable plate: ladder shape plate 2x5 holes Only to be funded Tripolymer where used in a service
for which a Medicare Benefit is payable
ST521 Stryker Leibinger Resorbable Fixation Resorbable plate: straight Tripolymer 14 holes Only to be funded where used in a service for which a Medicare Benefit is payable
ST524 Stryker Leibinger Resorbable Fixation Resorbable plate: Y-shape Tripolymer 6 holes Only to be funded where used in a service for which a Medicare Benefit is payable
ST525 Stryker Leibinger Resorbable Fixation Resorbable plate: Y-shape Tripolymer 8 holes Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 571 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TiMax Surgical Pty LtdTI001 TiMax Titanium Plates Micro, Mini Standard - L (R & L), T & Y 4 - 24 holes Only to be funded
Shapes, Straight Long. Micro & Mini where used in a service Square Triple for which a Medicare
Benefit is payable
TI009 TiMax Titanium Plates Micro & Mini Square Double 3 x 2 holes Only to be funded where used in a service for which a Medicare Benefit is payable
TI010 TiMax Titanium Plates Micro, Mini & Standard - Double T & Y 4 to 9 holes Only to be funded Shape where used in a service
for which a Medicare Benefit is payable
TI012 TiMax Titanium Plates Fracture, Curved and Angled 4 - 6 holes Only to be funded where used in a service for which a Medicare Benefit is payable
TI019 TiMax Titanium Plates Micro, Mini & Standard Straight Short 4-8 Holes Only to be funded where used in a service for which a Medicare Benefit is payable
TI021 TiMax Titanium Plates Micro & Mini Square Single 2 x 2 holes Only to be funded where used in a service for which a Medicare Benefit is payable
TI023 TiMax Titanium Plates Maxillary Prostheses Only to be funded where used in a service for which a Medicare Benefit is payable
TI024 TiMax Titanium Plates Hemi Mandible, right and left Only to be funded where used in a service for which a Medicare Benefit is payable
TI025 TiMax Titanium Plates Full Mandible Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 572 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TI026 TiMax Titanium Plates Custom Mesh Only to be funded where used in a service for which a Medicare Benefit is payable
TI027 TiMax Titanium Plates Burr Hole Cover Only to be funded where used in a service for which a Medicare Benefit is payable
TI033 TiMax Titanium Plates Mesh, Strap, J Plate Mesh 125 x 125mm Only to be funded where used in a service for which a Medicare Benefit is payable
TI040 TiMax Titanium Plates Fracture Straight Short & Long 4 to 14 holes Only to be funded where used in a service for which a Medicare Benefit is payable
Plates, Cranioplasty
Mondeal Medical Systems Pty LtdMD002 Mondeal Medical Systems Implant & Plate Straight 2-6 hole Only to be funded
Prostheses, Mini 2000 Reconstruction where used in a service for which a Medicare Benefit is payable
MD004 Mondeal Medical Systems Implant & Plate Straight 8 hole Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD005 Mondeal Medical Systems Implant & Plate Straight 16 hole Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD007 Mondeal Medical Systems Implant & Plate L Shape Right & Left Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 573 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MD008 Mondeal Medical Systems Implant & Plate T Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD009 Mondeal Medical Systems Implant & Plate Y Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD011 Mondeal Medical Systems Implant & Plate T Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD015 Mondeal Medical Systems Implant & Plate Straight 4-6 hole Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD019 Mondeal Medical Systems Implant & Plate Straight 8 hole & L Shape - Right & Left Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD021 Mondeal Medical Systems Implant & Plate T Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD022 Mondeal Medical Systems Implant & Plate Y Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD024 Mondeal Medical Systems Implant & Plate T, Y, Orbital Shape Only to be funded Prostheses, Mini 2000 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD038 Mondeal Medical Systems Implant & Plate Straight 4 - 6 hole Only to be funded Prostheses, Mini 1700 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD041 Mondeal Medical Systems Implant & Plate Straight 16 hole, Y Shape Only to be funded Prostheses, Mini 1700 Reconstruction where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 574 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MD042 Mondeal Medical Systems Implant & Plate Orbital Shape Only to be funded Prostheses, Mini 1700 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD043 Mondeal Medical Systems Implant & Plate T, Y, Z Shape Only to be funded Prostheses, Mini 1700 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD047 Mondeal Medical Systems Implant & Plate L Shape Right & Left Only to be funded Prostheses, Mini 1700 Reconstruction where used in a service
for which a Medicare Benefit is payable
MD058 Mondeal Medical Systems Implant & Plate L, T Shape Only to be funded Prostheses, Micro 1200 Reconstruction where used in a service System for which a Medicare
Benefit is payable
MD059 Mondeal Medical Systems Implant & Plate L, Y Shape Only to be funded Prostheses, Micro 1200 Reconstruction where used in a service System for which a Medicare
Benefit is payable
MD062 Mondeal Medical Systems Implant & Plate H Shape Only to be funded Prostheses, Micro 1200 Reconstruction where used in a service System for which a Medicare
Benefit is payable
MD070 Mondeal Medical Systems Implant & Mesh Micro 50 x 30mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
MD071 Mondeal Medical Systems Implant & Mesh Micro 100 x 60mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
MD072 Mondeal Medical Systems Implant & Mesh Micro 100 x 30mm, 50 x 60mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
MD104 Mondeal Medical Systems Implant & Chin Plate 4mm - 12mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 575 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Chin
Device Technologies Australia Pty LtdDE026 Chin Implant Silicone 4.8 - 6.3 cm x 0.4 - 0.9 cm Only to be funded
where used in a service for which a Medicare Benefit is payable
Medical Device Alliance Pty LtdMP010 Facial Implant Chin Anotomical chin Small, medium, large/left, right Only to be funded
where used in a service for which a Medicare Benefit is payable.
MP012 Facial Implant Chin Chin Small, medium, large/left, right Only to be funded where used in a service for which a Medicare Benefit is payable.
Mentor Medical SystemsMN020 Implantech Facial Implants - Chin Implantech Anatomical Chin;Flowers Extra small, Small, Medium, Large, Extra Only to be funded
Mandibular Glove;Terino Extended Large where used in a service Anatomical Chin;Terino Square Chin for which a Medicare Style I;Mittleman Pre-Jowl;Glasgold Benefit is payable.Wafer for Pre-Jowl Chin;Mittleman Pre-Jowl Chin;Glasgold Wafer for Extended Anatomical Chin;Silicone Chin;Terino Square Chin II Composition Implant Grade Silicone Elastomer
Surgiplas MedicalSP004 Facial Prosthesis Silicone elastomer Small / Medium / Large / X-Large Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 576 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Dental, Implantable
Halas Dental Pty LtdHD006 Dental Implants Titanium type 4 and 5 3.25 to 6.0mm diameter, 6.0 to 52.5mm Only to be funded
where used in a service for which a Medicare Benefit is payable
Health Care Surgical Pty LtdHC001 Maestro Implant System Titanium dental implant 3.5,4,5mm Only to be funded
where used in a service for which a Medicare Benefit is payable.
HC002 Maestro Implant System Abutment 3.5,4,5mm Endosseous Implants - (Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst).
HC003 Maestro Implant System Cover Screw 3.5,4,5mm Endosseous Implants - (Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst).
HC004 Autotac titanium tissue tacs Titanium tacs 1.2mm diameter Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 577 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Implant Innovations Australia Pty LtdNW001 3i Abutment Complete Titanium 3.25 - 6mm diameter Endosseous Implants -
(Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst.)
NW002 3i Self Tapping Threaded Implants and 3i Osseotite/Ice 3.25 - 6mm diameter Endosseous Implants - Coverscrew (Not to be included for
dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst.)
Nobel BiocareNR001 Branemark Abutments Abutment, complete 3.5, 4.5, 5.0, 6.0, 7.0mm Diameter Endosseous Implants -
(Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst.)
NR002 Branemark Cover Screws Cover screw 3, 3.3, 3.75, 4, 4.3, 5, 5.5, 6mm Endosseous Implants - (Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst.)
PART A - Prostheses List by Category, Groups and Sponsor Page 578 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
NR003 Branemark Fixtures Titanium Fixture 3, 4, 5mm Endosseous Implants - (Not to be included for dental treatment except as a secondary procedure when partial or complete resection of a mandible or maxilla has been undertaken for removal of an extensive tumour or cyst.)
NR004 Healing Abutment Complete Abutment Coping One Size Only Only to be funded where used in a service for which a Medicare Benefit is payable
NR005 Dental implants Titanium Fixtures - SteriOss Dia 3.25 - 6.0mm Length 7 - 18mm Only to be funded where used in a service for which a Medicare Benefit is payable
NR006 Branemark Novum System Titanium - Kit Fixture System One size only Only to be funded where used in a service for which a Medicare Benefit is payable
NR007 Branemark Titanium Fixture Zygomaticus Fixture 30, 35, 42.5, 40, 45, 47.5, 50, 52.5mm Only to be funded where used in a service for which a Medicare Benefit is payable
NR009 NobelDirect Implant Dental Implant Endosseous incorporating 10mm, 13mm, 16mm To be funded only abutment, Titanium when used in MBS
procedures relating to
NR010 Replace Implant Dental Implant Endosseous, Titanium 10mm, 13mm, 16mm To be funded only when used in MBS procedures relating to
NR011 NobelPerfect Implant Dental Implant Edosseous, Titanium 10mm, 13mm, 16mm To be funded only when used in MBS procedures relating to
PART A - Prostheses List by Category, Groups and Sponsor Page 579 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Ear
Medical Device Alliance Pty LtdMP034 Facial Implant - Ear One size only Only to be funded
where used in a service for which a Medicare Benefit is payable.
Prostheses, Finger/Thumb
Medical Device Alliance Pty LtdMP011 Phalangeal Joint Implant Flexible monoblock implant to restore 00-7 Only to be funded
finger articulation, 2001 where used in a service for which a Medicare Benefit is payable.
Prostheses, Joint, Mandible
Biomet Australia Pty LtdBI559 TMJ System Mandibular Component, Left or Right, (40 - 60mm), 5-13 hole Only to be funded
Titanium where used in a service for which a Medicare Benefit is payable
BI569 TMJ System Fossa Component, Left or Right; Small, Medium Large Only to be funded Titanium, UHMWPE where used in a service
for which a Medicare Benefit is payable
BI570 TMJ System Screw, Cross Drive, Fossa; Titanium (2.0 or 2.3) x (5 - 13) mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 580 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Joint, Mandibular Condyle
Biomet Australia Pty LtdBI742 TMJ System Screw, Cross Drive Emergency, 3.2 mm (dia) x 8, 10, 12mm (lengths) Only to be funded
Mandibular Component, Titanium where used in a service for which a Medicare Benefit is payable
BI745 TMJ System Screw, Cross Drive, Mandibular 2.7 mm (dia) x 8, 10, 12mm (lengths) Only to be funded Component, Titanium where used in a service
for which a Medicare Benefit is payable
Prostheses, Mammary, Internal
Device Technologies Australia Pty LtdDE001 Saline Filled Mammary Implant McGhan Style 68RTV 9 x 3cm to 16.4 x 5.6cm In strict accordance
with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE100 McGhan Style 150 Biodimensional Biocell Full height, Short Height 9.5 - 16cm width x 8 - 17cm height x 4.2 In strict accordance Textured Expand Gel/Saline Filled - 7.1cm projection with the requirements Mammary Implant, Low Pole of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE102 McGhan Style 110 & 120 Biocell Round: Moderate or high profile 90 - 650 grams In strict accordance Textured Gel-Filled Mammary Implant with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 581 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE104 McGhan Style 40 & 45 Intrashiel Gel- Round: standard or high profile 120 400 grams In strict accordance Filled Round Mammary Implant with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE106 CUI Type MLP, Microcell, DRIE Low Low or High profile, textured surface 100 - 525 grams In strict accordance Profile Gel-Filled Mammary Implant; with the requirements CUI Type MHP, Microcell, DRIE High of the Medicare Profile Gel-Filled Mammary Implant Benefits Schedule Items
Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE120 McGhan Style 410 & 410 Soft Touch Full, moderate or low height, Extra Full, 125 - 775 grams In strict accordance Biodimensional Biocell Textured Cohesive Full, moderate or low projection with the requirements Gel-filled Mammary Implant of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
Medical Device Alliance Pty LtdMP036 Infraclavicular Implant Infraclavicular Implant 14cc; 20cc; 38cc; 63cc; 122cc Only to be funded
where used in a service for which a Medicare Benefit is payable
MP037 Pectoral Implants Gel - Smooth surface 190cc - 300cc Only to be funded where used in a service for which a Medicare Benefit is payable
MP038 Pectoral Implants Elastomer - Smooth surface 190cc - 300cc Only to be funded where used in a service for which a Medicare Benefit is payable
MP039 Pectoral Implants Elastomer - Textured surface 190cc - 300cc Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 582 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mentor Medical SystemsMN018 Smooth High Profile Gel-filled Mammary Mammary prostheses 125cc-Model 350-1254BC; 150cc-Model In strict accordance
Prostheses 350-1504BC; 175cc-Model 350-1754BC; with the requirements 200cc-Model 350-2004BC; 225cc-Model of the Medicare 350-2254BC; 250cc-Model 350-2504BC; Benefits Schedule Items275cc-Model 350-2754BC; 300cc-Model Number 45524, 45527,350-3004BC; 325cc-Model 350-3254BC; 45528, 45542, 45552, 350cc-Model 350-3504BC; 375cc-Model 45554, 45555 only.350-3754BC; 400cc-Model 350-4004BC; 425cc-Model 350-4254BC; 450cc-Model 350-4504BC; 500cc-Model 350-5004BC; 550cc-Model 350-5504BC, 600cc-Model 350-6004BC; 650cc-Model 350-6504BC; 700cc-Model 350-7004BC; 800cc-Model 350-8004BC
MN019 Siltex High Profile Gel-filled Mammary Mammary Prostheses 125cc-Model 354-4125; 150cc-Model In strict accordance Prostheses 354-4150; 175cc-Model 354-4175; with the requirements
200cc-Model 354-4200; 225cc-Model of the Medicare 354-4225; 250cc-Model 354-4250; Benefits Schedule Items275cc-Model 354-4275; 300cc-Model Number 45524, 45527,354-4300; 325cc-Model 354-4325; 45528, 45542, 45552, 350cc-Model 354-4350; 375cc-Model 45554, 45555 only.354-4375; 400cc-Model 354-4400; 425cc-Model 354-4425; 450cc-Model 354-4450; 500cc-Model 354-4500; 550cc-Model 354-4550; 600cc-Model 354-4600; 650cc-Model 354-4650; 700cc-Model 354-4700; 800cc-Model
Prostheses, Mammary, Internal, Gel-Filled
Device Technologies Australia Pty LtdDE108 CUI Type RLD, RHD DRIE, Round, Low or High Profile 100 -800 ccs In strict accordance
Smooth Gel-filled Mammary Implant with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 583 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE109 CUI styles CML, CMM, CFM and CMH Silicone Cohesive Gel-Filled Breast 80 - 800 grams In strict accordance with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE110 CUI Type SLD, DRIE, Low Profile Low or High Profile 100 - 800 grams In strict accordance Smooth Silicone Gel-filled Mammary with the requirements Implant; CUI Type SHD, DRIE, High of the Medicare Profile Smooth Silicone Gel-filled Benefits Schedule Items
Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE219 CUI Style XML Round, Expandable, Microcell, DRIE, 180 -700grams In strict accordance Silicone Gel/Saline Dual Lumen, Low with the requirements Profile Breast Implant. of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
Mentor Medical SystemsMN013 Mentor Siltex Becker Expander/Mammary 150, 200, 250, 300, 350, 400, 500, 600, In strict accordance
Prostheses 700. 800cc with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN014 Mentor Medical Systems Smooth Low 100,125,150,175,200,225,250,275,300,3 In strict accordance Bleed Gel-Filled, Mammary Prostheses 25,400,450,500,550,600,700,800cc with the requirements Breast, Permanently Implantable of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 584 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MN015 Mentor Siltex Low Bleed Gel-Filled 100,125,150,175,200,225,250,275,300,3 In strict accordance (Moderate Profile) Mammary Prostheses 25,350,375,400,500,550,600,700,800cc with the requirements Breast, Permanently Implantable of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN016 Mentor Siltex Low Bleed Gel-Filled (High 75, 200, 225, 250, 275, 300, 325, 350, In strict accordance Profile) Mammary Prostheses Breast, 400, 450, 500, 550cc with the requirements Permanently Implantable of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN017 Mentor Medical Systems Contour Profile 120,135,155,180,215,245,280,315,355,3 In strict accordance Gel-filled Mammary Prostheses, Breast, 95,440,480,530,640,775cc with the requirements Permanently Implantable of the Medicare
Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN024 Round Cohesive Gel-Filled Mammary Model 354-1009; Model 354-1259; Model 100cc, 125cc, 150cc, 175cc, 200cc, Only to be funded Prosthesis 354-1509; Model 354-1759; Model 354- 225cc, 250cc, 275cc, 300cc, 325cc, where used in a service
2009; Model 354-2259; Model 354-2509; 350cc, 375cc, 400cc, 450cc, 500cc, for which a Medicare Model 354-2759; Model 354-3009; Model 550cc, 600cc, 700cc, 800cc Benefit is payable. 354-3259; Model 354-3509; Model 354-3759; Model 354-4509; Model 354-5009; Model 354-5509; Model 354-6009; Model 354-7009; Model 354-8009; Model 354-
Surgiplas MedicalSP047 Gel Filled Mammary Prosthesis Models Textured Round 80 to 800ml In strict accordance
GFX-LP, GFX and GFX-EHP with Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
SP048 Gel Filled Mammary Prosthesis Models Smooth Round 80 to 800ml In strict accordance RGI-D and RGI-DH with Medicare Benefits
Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 585 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SP049 Gel Filled Mammary Prosthesis Models CoGel High Cohesive 100 to 630gm In strict accordance CoGel-XR, CoGel- XM and CoGel XA with Medicare Benefits
Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
Technology For Life Pty LtdTE035 Eurosilicone Cristilline Paragel Mammary Round high cohesive gel breast implants 60 - 500cc In strict accordance
Implants with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only
Prostheses, Mammary, Internal, Inflatable
Device Technologies Australia Pty LtdDE030 Style 468 Biodimensional Saline-filled Silicone shell filled with saline 195 - 205 cm3 x 620 - 650 cm3 In strict accordance
Mammary Implant with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE031 Style 363 Biodimensional Low Anatomical Silicone shell filled with saline, for 230 - 240 cm3 x 650 - 685 cm3 In strict accordance Saline-Filled Mammary Implant Reconstruction with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE032 Style 163 Biodimensional Full Anatomical Silicone shell filled with saline, for 360 - 380 cm3 x 780 - 820 cm3 In strict accordance Saline-Filled Mammary Implant Reconstruction with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 586 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
DE033 Style 168 Biocell Textured Mammary Silicone shell filled with saline 120 - 150 cm3 x 510 - 540 cm3 In strict accordance with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE121 Mammary Prosthesis Smooth Surface - Saline 120 to 510cc In strict accordance with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
DE122 Mammary Prosthesis Textured Surface - Saline 90 to 510cc In strict accordance with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
Mentor Medical SystemsMN004 Mentor Siltex Spectrum Saline Tissue Saline Mammary Prostheses Volume 275cc - 650cc In strict accordance
Expander with the requirements of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN010 Mentor Saline-Filled Anterior Diaphragm Mammary Prothesis - Smooth 125 to 700cc In strict accordance Valve Mammary Prosthesis with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
PART A - Prostheses List by Category, Groups and Sponsor Page 587 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MN011 Mentor Saline Siltex Anterior Diaphragm Mammary Prothesis - Textured 125 to 475cc In strict accordance ValveMammary Prosthesis with the requirements
of the Medicare Benefits Schedule Items Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
MN023 Smooth Round High Profile Saline-Filled Model 350-3170; Model 350-3190; Model 170cc, 190cc, 210cc, 230cc, 250cc, Only to be funded Mammary Prosthesis 350-3210; Model 350-3230; Model 350- 270cc, 290cc, 310cc, 330cc, 380cc, where used in a service
3250; Model 350-3270; Model 350-3290; 420cc, 460cc, 500cc, 560cc, 630cc for which a Medicare Model 350-3310; Model 350-3330; Model Benefit is payable. 350-3380; Model 350-3420; Model 350-3460; Model 350-3500; Model 350-3560; Model 350-3630
Surgiplas MedicalSP011 Nagosil SFS-LP-Saline Filled Low Profile Smooth surface 100 to 600cc In strict accordance
Smooth Surface Breast Prostheses, with the requirements Nagosil SFS-HP-Saline Filled High Profile of the Medicare Smooth Surface Breast Prostheses Benefits Schedule Items
Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
SP012 Nagotex SFX-LP-Saline Filled Low Textured surface 100 to 600cc In strict accordance Profile Textured Surface, Nagotex SFX- with the requirements HP-Saline Filled High Profile Textured of the Medicare Surface Breast Prostheseses Benefits Schedule Items
Number 45524, 45527, 45528, 45542, 45552, 45554, 45555 only.
Prostheses, Maxillofacial
Device Technologies Australia Pty LtdDE029 Malar Implant Silicone 4 - 5.2cm x 2.2 - 2.8cm Only to be funded
where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 588 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Medical Device Alliance Pty LtdMP007 Facial Implant Malar Malar Small, medium, large/left or right Only to be funded
where used in a service for which a Medicare Benefit is payable.
MP035 Facial Implant Malar Malar Anatomical Small, medium, large/left or right Only to be funded where used in a service for which a Medicare Benefit is payable.
Mentor Medical SystemsMN003 Terino Malar Shell Implants Solid-silicone, Implantech Small, medium, large, xlarge Only to be funded
where used in a service for which a Medicare Benefit is payable
Technology For Life Pty LtdTE015 Spectrum Designs Implantable Prosthesis Silicone implantable blocks Block I-IV, 12-17.5cm Only to be funded
Blocks where used in a service for which a Medicare Benefit is payable.
Prostheses, Muscle
Medical Device Alliance Pty LtdMP005 Calf Implants Asymmetrical shape, silicone gel smooth 85-180cc Only to be funded
surface where used in a service for which a Medicare Benefit is payable.
MP008 Calf Implant Silicone elastomer - smooth surface, 70-175cc Only to be funded asymmetrical shape, where used in a service
for which a Medicare Benefit is payable.
MP014 Calf Implant Silicone elastomer - smooth surface, 15-105cc Only to be funded symmetrical shape where used in a service
for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 589 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MP016 Calf Implants Symmetrical shape, silicone gel 12-140cc Only to be funded where used in a service for which a Medicare Benefit is payable.
MP017 Gluteal Implants filled with Gel Oval Shape, Silicone Gel, Smooth 100-300cc Only to be funded where used in a service for which a Medicare Benefit is payable.
MP018 Gluteal Implants filled with Gel Oval Shape, Silicone Gel, Textured 200-400cc Only to be funded where used in a service for which a Medicare Benefit is payable.
MP019 Gluteal Implants filled with Gel Round Shape, Silicone Gel, Smooth 200-300cc Only to be funded where used in a service for which a Medicare Benefit is payable.
MP020 Gluteal Implants filled with Elastomer Oval Shape, Silicone Elastomer, Smooth 95-260cc Only to be funded Surface where used in a service
for which a Medicare Benefit is payable.
MP021 Gluteal Implants filled with Elastomer Oval Shape, Silicone Elastomer, Textured 225-420cc Only to be funded Surface where used in a service
for which a Medicare Benefit is payable.
MP022 Gluteal Implants filled with Elastomer Round Shape, Silicone Elastomer, 250-340cc Only to be funded Smooth Surface where used in a service
for which a Medicare Benefit is payable.
MP032 Suspension Sheet for Mammoplasty Silicone sheet - textured 0.3mm, 29cm x 17cm; Only to be funded where used in a service for which a Medicare Benefit is payable.
MP033 Suspension Sheet for Mammoplasty Silicone sheet - polyurethane coated 3mm, 29cm x 17cm Only to be funded where used in a service for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 590 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Nasal, Dorsal
Device Technologies Australia Pty LtdDE027 Nasal Implant Nasal Dorsum, Silicone 2.8 x 5.35cm x 0.75 - 0.90cm Only to be funded
where used in a service for which a Medicare Benefit is payable
DE028 Nasal Implant Rhinoplasty, Silicone 4.7 - 5 cm x 1 - 1.2 cm Only to be funded where used in a service for which a Medicare Benefit is payable
Medical Device Alliance Pty LtdMP003 Facial Implant Nasal "L" Shaped White, pink 1.9 x 4.1 x 2.8cm, 1.8 x 4 x 2.9cm Only to be funded
where used in a service for which a Medicare Benefit is payable.
MP009 Facial Implant Nasal Nasal dorsum Small, large Only to be funded where used in a service for which a Medicare Benefit is payable.
MP013 Facial Implant Nasal Zygomatic Right, left Only to be funded where used in a service for which a Medicare Benefit is payable.
Mentor Medical SystemsMN021 Implantech Facial Implants - Nasal Implantech Shirakabe Nasal Implant; Extra Small, Small, Medium, Large, Extra Only to be funded
Implantech Flowers Dorsal Nasal Large where used in a service Implant; Implantech Dorsal Columella for which a Medicare Implant; Implantech Brink Peri-Pyriform Benefit is payable.Implant; Implantech Rizzo Dorsal Nasal Implant; Composition: Implant Grade Silicone Elastomer
PART A - Prostheses List by Category, Groups and Sponsor Page 591 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Testicle
Medical Device Alliance Pty LtdMP004 Testicular Implant Filled with Elastomer 5.3-45.8cc Only to be funded
where used in a service for which a Medicare Benefit is payable.
MP006 Testicular Implant Silicone gel 3200 5-38cc Only to be funded where used in a service for which a Medicare Benefit is payable.
MP015 Testicular Implant Silicone with holes for fixation 3230 5-38cc Only to be funded where used in a service for which a Medicare Benefit is payable.
Reconstruction Sheeting, Plastic Surgery
Austramedex (VIC) Pty LtdAR003 Enophthalmos Wedge Regular left and right. Large left and Regular: 22 x 31 x 7mm. Large: 28 x 40 x Only to be funded
right. (Models 9541 - 9544) 7.5mm where used in a service for which a Medicare Benefit is payable
AR004 Orbital rim Porus Polyethylene. Orbital rims, left and 47 x 40 mm Only to be funded right extended. Models 9539, 9540 where used in a service
for which a Medicare Benefit is payable
AR005 Complete Orbital Shape Porus Polyethylene. Complete and 2 / 3 Inferior: 83 x 78mm Only to be funded orbit shapes. Inferior 2 / 3 left and right. where used in a service Models 9567, 9568 for which a Medicare
Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 592 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AR006 Chins Porus Polyethylene. Extended chin Extended chin: small 45 x 47 x 3mm, Only to be funded implants: Round RZ (Models 8313 - medium 45 x 47 x 5mm, large 45 x 47 x where used in a service 8315) and extended square RZ (Models 7mm; Two pidce chin: small 56 x 33 x for which a Medicare 8316, 8318). Two piece chin design 5mm, medium 56 x 33 x 7mm, large 56 x Benefit is payable(Models 8320 - 8322). Single piece chin 33 x 9mm; Single piece chin: small 65 x design, contoured (Models 7520 - 7522). 37 x 5mm, medium 65 x 37 x 7mm, largeAdditional chin shapes (Models 6341 - 65 x 37 x 10mm. Additional chins: 53 x
22 x 13mm, 74 x 35 x 10 mm, 50 x 28 x
AR007 Genioplasty Wedge Porus Polyethylene. Genioplasty wedges, Small 60 x 25 x 5mm, medium 60 x 25 x Only to be funded models 8340 - 8343 7.5mm, large 60 x 25 x 10mm where used in a service
for which a Medicare Benefit is payable
AR008 Prejowl Shape Porus Polyethylene. Model 8319 45 x 41 x 4mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR009 Mandibular Angle Porus Polyethylene. Lateral augmentation Lateral augmentation onlay: 47 x 37 x 3 x Only to be funded onlay shapes, mandibular angle left and 6.5 x 3 x 3mm. Reconstructive onlay where used in a service right (Models 7535, 7536). shapes: E-5 79 x 32 x 5 x 7 x 5 x 10mm, for which a Medicare Reconstructive onlay shapes, ramus with E-10 79 x 32 x 10 x 7 x 10 x 10mm. Benefit is payableinf ridge E-5 and E-10, left and right Aesthetic onlay shapes: ES-5 79 x 32 x 5 (Models 7537 - 7540). Aesthetic onlay x 5 x 5 x 4mm, ES-10 79 x 32 x 10 x 5 xshapes, ramus with inf ridge ES-5 and
AR010 Malar Shape Porus Polyethylene. Design RZ malar Design RZ malar shapes: super petite 50 x Only to be funded shapes, super petite and petite, left and 19 x 3mm, petite 50 x 19 x 5mm. Design where used in a service right (Models 9501 - 9504). Design M malar shapes: small 64 x 19 x 3mm, for which a Medicare malar shapes, left and right (Models 9507 medium 64 x 19 x 4.5mm, large 64 x 19 Benefit is payable - 9512). Additional malar shapes, x 7mm. Additional malar shapes: small extended contoured left and right (Models 45 x 24 x 3mm, medium 50 x 26 x 4mm,
large 55 x 27 x 5mm
AR011 Nasal Shape or Rhinoplasty Shape Porus Polyethylene. Nasal Arch shapes, Nasal arch shapes: small 70 x 13 x 2mm, Only to be funded nasal arch and nasal sheet (Models 9533 - medium 70 x 15 x 2mm, large 70 x 15 x where used in a service 9536). Nasal dorsum shapes, design A 2mm, sheet 40 x 9 x 1.1mm. Nasal for which a Medicare and design B (Models 7516 - 7518). dorsum shapes: design A small 53 x Benefit is payableNasal valve support, lateral nasal valve 5mm, design A large 66 x 8mm, design B
67 x 6.5mm. Nasal valve support: lateral nasal valve 13 x 0.85 x 3.5mm
AR012 Micro Thin Sheet Porus Polyethylene. Model 8438 30 x 50 x 0.4mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 593 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AR013 Ultra Thin Sheet Porus Polyethylene. Models 7210 38 x 50 x 0.85mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR014 Sheet Porus Polyethylene. Models 6330, 6331, Sheets: 38 x 50 x 1.5mm, 50 x 76 x Only to be funded 8662, 9562. Micro single channel sheet, 1.5mm, 76 x 127 x 1.5mm, 38 x 50 x where used in a service model 9528. Barrier microplate single 3mm. Microplate single channel: 38 x 50 for which a Medicare channel sheet, model 9527 x 0.85mm. Barrier microplate single Benefit is payable
channel: 38 x 50 x 0.85mm
AR015 Barrier Sheet: Barrier Sheet - Orbital Floor Porus Polyethylene. Barrier sheet - Barrier sheet - Rectangle: 50 x 76 x Only to be funded Rectangle, models 8312 and 9312. Orbital 1mm, 50 x 76 x 1.6mm: 50 x 76 x 1mm, where used in a service floor implants, models 8305 and 9305 50 x 76 x 1.6mm. Orbital Floor: 38 x 50 for which a Medicare
x 1mm, 38 x 50 x 1.6mm Benefit is payable
AR016 Block Porus Polyethylene. Models 6332 - 6340 13 x 38 x 3 - 9.5mm, 25 x 50 x 3 Only to be funded 9.5mm, 38 x 63 x 3 - 9.5mm where used in a service
for which a Medicare Benefit is payable
AR017 Burr Hole Cover Porus Polyethylene. Burr hole cover, Cover: 15 x 3 x 5mm, 29 x 7 x 14mm. Only to be funded models 7511 and 7512. Burr hole disk, Disk 14 x 15mm where used in a service
for which a Medicare Benefit is payable
AR018 Flexblock TF2 Porus Polyethylene. Flexblock TF2 Flexblock TF2: small 61 x 78 x 18mm, Only to be funded implant, left and right, models 9857 - 9860 medium 74 x 93 x 20mm, large 82 x 105 where used in a service
x 20mm for which a Medicare Benefit is payable
AR019 Sphere Porus Polyethylene. Sphere, models Sphere: 14 - 22mm. COI implant: 4 and Only to be funded 6316, 6326, 6327, 6317 and 6322. COI 5mL. MCOI: 3, 4.2 and 5.6mL, 16, 18 where used in a service implant, models 7222 and 7223. MCOI for which a Medicare implant, models 7207 - 7209 Benefit is payable
AR020 Ear Reconstruction Porus Polyethylene. Helical rim, models Helical rim: 37 x 62mm Only to be funded 8328 and 8329 where used in a service
for which a Medicare Benefit is payable
AR023 Complete Orbital Shape Complete left and right. Models 9569, Complete 61 x 76mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 594 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AR024 Mandibular angle Porus Polyethylene. RZ mandibular angles RZ mandibular angles: 65 x 35 x 3 x 6.5 x Only to be funded left and right (Models 9955 - 9960); 3 x 3mm, 65 x 35 x 7 x 6.5 x 3 x 3mm, where used in a service Porus Polyethylene. Contoured 65 x 35 x 11 x 6.5 x 3 x 3mm. Contoured for which a Medicare mandibular angles left and right (Models mandibular angles left and right:59 x 29 x Benefit is payable
AR025 Nasal Shape. Petite Nasal Dorsum. Porus Polyethylene. Petite Nasal Dorsum Petite Nasal Dorsum: 4 x 4 x 45mm, 4 x Only to be funded ( Models 84000 - 84004). 4 x 55mm, 5 x 5 x 45mm, 5 x 5 x 55mm, where used in a service
6 x 9 x 55mm. for which a Medicare Benefit is payable
AR026 Nasal Valve Support. Lateral Nasal Valve, Model 7545. External Lateral Nasal Valve:13 x 3.5 x 0.85mm, Only to be funded Nasal Valve Batten, Model 7546. External External Nasal Valve Batten: 25 x 11 x where used in a service Nasal Valve Batten - Thin, Model 7167 0.85mm, External Nasal Valve Batten - for which a Medicare
Thin: 24 x 11.5 x 0.6mm. Benefit is payable
AR027 Nasal Sheet (Strut). Nasal Sheet (Strut). Model 9536 Nasal Sheet (Strut): 40 x 9 x 1.1mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR028 Nasal Shell Shapes. Nasal Shell Shapes, Regular and Large Regular: 38 x 21 x 17mm, Insert Small 30 Only to be funded with Inserts Small and Large (included). x 4 x 9mm, Insert Large 38 x 2.5 x where used in a service Models 9553 - 9554. 9mm. Large: 40 x 20 x 18mm, Insert for which a Medicare
Small 32 x 4 x 9mm, Insert Large 41 x 3 Benefit is payable
AR029 Ultra Thin Sheet Porus Polyethylene. Model 7212 50 x 76 x 0.85mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR030 Ultra Thin Sheet Porus Polyethylene. Model 7214 76 x 127 x 0.85mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR031 Ultra Thin Sheet Porus Polyethylene. Model 7216 127 x 178 x 0.85mm Only to be funded where used in a service for which a Medicare Benefit is payable
AR032 Sheet - Multi Channel, Barrier Channel. Porus Polyethylene. Miniplate channel Miniplate channel: 40 x 52 x 2.3mm. Only to be funded sheet, model 9529. Microplate channel Mircoplate channel: 40 x 52 x 2.3mm. where used in a service sheet, model 9530. Barrier Miniplate and Barier Miniplate and Microplate Channel for which a Medicare Microplate Channel Sheets, Models 9531 Sheets: 40 x 52 x 2.3mm, 40 x 52 x 2.3mm Benefit is payable
AR033 Sheet - Barrier Single Channel Sheet. Porus Polyethylene. Barrier Single Barrier Single Channel: 38 x 50 x 0.85mm Only to be funded Channel Sheet, Model 9527. where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 595 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AR034 Flexblock TF2 Porus Polyethylene. Flexblock TF2 Flexblock TF2: large 82 x 105 x 20mm. Only to be funded implant, left and right, models 9861 - 9862 where used in a service
for which a Medicare Benefit is payable
AR035 Flexblock TF Porus Polyethylene. Flexblock TF Flexblock TF: small 70 x 70 x 10mm, Only to be funded implant, models 9521 - 9522. medium 88 x 86 x 15mm, where used in a service
for which a Medicare Benefit is payable
AR036 Flexblock TF Porus Polyethylene. Flexblock TF Flexblock TF: large 98 x 95 x 18mm. Only to be funded implant, model 9523. where used in a service
for which a Medicare Benefit is payable
AR037 Flexblock, Cranial Grid Porus Polyethylene.Flexblock cranial grid Flexblock cranial grid: 97 x 107 x 6mm. Only to be funded implant, model 9524. where used in a service
for which a Medicare Benefit is payable
AR038 Flexblock Porus Polyethylene. Flexblock, model Flexblock: 56 x 91 x 4mm. Only to be funded where used in a service for which a Medicare Benefit is payable
AR039 Ear Reconstruction Porus Polyethylene. Ear base left and Ear base: 29 x 55 x 13mm, 32 x 65 x Only to be funded right, models 7542 and 7525 - 7527. Ear 16mm. Ear base extended: 30 x 60mm. where used in a service base extended left and right, models 8330 for which a Medicare and 8331. Benefit is payable
Medical Device Alliance Pty LtdMP023 Silicone Sheets Sheet standard-small with reinforcement 100mm Only to be funded
where used in a service for which a Medicare Benefit is payable.
MP024 Silicone Sheets Sheet standard - large with reinforcement 200mm Only to be funded where used in a service for which a Medicare Benefit is payable.
MP025 Silicone Sheets Sheet standard - small without 100mm Only to be funded where used in a service for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 596 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MP026 Silicone Sheets Sheet standard - large without 200mm Only to be funded where used in a service for which a Medicare Benefit is payable.
MP027 Silicone Sheets Sheet extra strength small 100mm Only to be funded where used in a service for which a Medicare Benefit is payable.
MP028 Silicone Sheets Sheet extra strength large 200mm Only to be funded where used in a service for which a Medicare Benefit is payable.
MP029 Silicone Sheets Block standard super soft Soft, Medium, Hard Only to be funded where used in a service for which a Medicare Benefit is payable.
MP030 Silicone Sheets Block coloured, single consistency, One size only Only to be funded where used in a service for which a Medicare Benefit is payable.
MP031 Silicone Sheets Block coloured, double consistency, One size only Only to be funded white/pink where used in a service
for which a Medicare Benefit is payable.
Screws
Biomet Australia Pty LtdBI397 Lactosorb Resorbable Craniomaxillofacial Bone Screw, Lactosorb 1.5mm, 2mm (1.5, 2.0, 2.5, 2.8) x (3 - 17mm) Only to be funded
Fixation System system; pkt 2, PGA/PLA where used in a service for which a Medicare Benefit is payable
BI399 Lactosorb Resorbable Craniomaxillofacial Cover, solid. Lactosorb PGA/PLA (0.25, 0.5, 0.75mm) x 25x25mm Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 597 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI400 Lactosorb Resorbable Craniomaxillofacial Cover, Solid Lactosorb PGA/PLA (0.25, 0.5, 0.75mm) x 38x38mm Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI401 Lactosorb Resorbable Craniomaxillofacial Cover, Solid Lactosorb PGA/PLA (0.25, 0.5, 0.75mm) x 50x50mm Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI412 Lactosorb Resorbable Craniomaxillofacial Cover, Solid Lactosorb PGA/PLA (0.25, 0.5, 0.75mm) x 75x75mm Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI413 Lactosorb Resorbable Craniomaxillofacial Cover, Solid Lactosorb PGA/PLA (0.25, 0.5, 0.75mm) x 100x100mm Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI414 Lactosorb Resorbable Craniomaxillofacial Lactosorb Plates, 2mm System, All sizes, 4 - 16 hole Only to be funded Fixation System shapes PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI415 Lactosorb Resorbable Craniomaxillofacial Bone Screw, 2 Pack, Endobrow, 2 x 5mm Only to be funded Fixation System Lactosorb. PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI416 Lactosorb Resorbable Craniomaxillofacial Panel, Lactosorb. 2mm System. 42 x 42mm (10x10 hole) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI417 Lactosorb Resorbable Craniomaxillofacial Panel, Lactosorb. 1.5mm System. 25 x 25mm (5 x 5 hole) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI418 Lactosorb Resorbable Craniomaxillofacial Panel, Lactosorb. 1.5mm System. 25 x 50mm (5 x 10hole) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI419 Lactosorb Resorbable Craniomaxillofacial Panel, Lactosorb. 1.5mm System. 50 x 50mm (10 x 10 hole) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 598 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BI424 Lactosorb Resorbable Craniomaxillofacial Mesh, Mandibular Lactosorb 2.5mm 12x30mm, 12x35mm Only to be funded Fixation System System PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI426 Lactosorb Resorbable Craniomaxillofacial Mesh, Mandibular Lactosorb 2.5mm 16 x 40mm Only to be funded Fixation System System. PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI427 Lactosorb Resorbable Craniomaxillofacial Mesh, Mandibular Lactosorb 2.5mm 42 x 42mm Only to be funded Fixation System System. PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI598 Lactosorb Resorbable Craniomaxillofacial Panel, Lactosorb, with strut, 2mm 2 x 6 hole, 2 x 5 hole Only to be funded Fixation System System, 2.5mm System. PGA/PLA where used in a service
for which a Medicare Benefit is payable
BI602 Lactosorb Resorbable Craniomaxillofacial Bone Screw, Lactosorb, 4 pack. PGA/PLA (1.5, 2.0mm) x (3, 4, 5 ,7mm) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable
BI791 Lactosorb Resorbable Craniomaxillofacial Screw, 1.5mm System, PLLA/PGA Length 3-5mm (pack 10) Only to be funded Fixation System where used in a service
for which a Medicare Benefit is payable.
Linvatec AustraliaLV045 Bionx Implants - Screws Bisorb FX 1.5 & 2.0 System Center 1.5mm Dia x 4,5,6,7,8mm & 2.0mm Dia Only to be funded
Drive and Cruciform Drive Screw - Pack x 4,6,8,10,12,14mm where used in a service for which a Medicare Benefit is payable
LV046 Bionx Implants - Screws/Tacks Bisorb FX 1.5 & 2.0 System Screw/Tack 1.5mm Screw: 4,5,6,7,8,10,12mm. Only to be funded - Pack of four 2.0mm Screw: 4,6,8,10,12,14,16,18mm. where used in a service
1.5 & 2.0mm Tack: 4,6mm for which a Medicare Benefit is payable
LV047 Bionx Implants - Screws Biosorb FX 2.4 System Center Drive and 2.4mm & 2.8mm Dia x Only to be funded Cruciform Drive Screw - Pack of one 6,8,10,12,14,16,18,20,24,28,32,36,40mm where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 599 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
LV048 Bionx Implants - Screws Biosorb FX 2.4 System Center Drive and 2.4mm & 2.8mm Dia x Only to be funded Cruciform Drive Screw - Pack of four 6,8,10,12,14,16,18,20,24,28,32,36,40mm where used in a service
for which a Medicare Benefit is payable
LV083 BioSorb FX Tack, pack of 10 Self-reinforced PLLA Diameter: 1.5 & 2.0mm, Length 4 & Only to be funded where used in a service for which a Medicare Benefit is payable
Medical & Optical Instruments Australia Pty LtdMO189 Resorb-X Bone Screw Resorb-X Osteosynthesis System, 1.6, 2.1, 2.4mm Dia, 4 - 9mm lengths Only to be funded
Resorbable bone screw where used in a service for which a Medicare Benefit is payable
Stryker Australia Pty LtdSK078 Stryker Leibinger Resorbable Fixation Delta resorbable mesh for fixation of 122mm x 122mm Only to be funded
facial fractures and congenital deformity where used in a service for which a Medicare Benefit is payable.
SK182 Delta Resorbable Plating System Resorbable Plates and Screw Fixation Mesh 122x122mm Only to be funded System for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable.
ST527 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 1.7x4-5mm Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST528 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 1.7x3-6mm Pack of 2 Only to be funded where used in a service for which a Medicare Benefit is payable
ST529 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 1.7x3-6mm Pack of 4 Only to be funded where used in a service for which a Medicare Benefit is payable
ST530 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 2.2mm x 4mm - 6mm (pack of 1) Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 600 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST531 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 2.2mm x 4mm - 6mm (pack of 2) Only to be funded where used in a service for which a Medicare Benefit is payable
ST532 Stryker Leibinger Resorbable Fixation Resorbable Screws Trypolymer 2.2mm x 4mm - 6mm (pack of 4) Only to be funded where used in a service for which a Medicare Benefit is payable
ST822 Delta Resorbable Plating System Resorbable plates and screw fixation Mesh 55 x 55 (1mm thickness) Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST823 Delta Resorbable Plating System Resorbable plates and screw fixation Ladder plate 2 x 5 holes Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST824 Delta Resorbable Plating System Resorbable plates and screw fixation L plate 110 degree 9 hole right; L plate Only to be funded system for the fixation of facial fractures 110 degree 9 hole left where used in a service
for which a Medicare Benefit is payable
ST825 Delta Resorbable Plating System Resorbable plates and screw fixation Y plate 9 holes Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST826 Delta Resorbable Plating System Resorbable plates and screw fixation Double Y plate 12 holes Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST827 Delta Resorbable Plating System Resorbable plates and screw fixation Curved plate 8 holes Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST828 Delta Resorbable Plating System Resorbable plates and screw fixation Straight plate 4 - 21 hole Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST829 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 4mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 601 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST836 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 6mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST837 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 8mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST838 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 10mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST839 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 8mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST840 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 10mm bone screw - 2 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST841 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 6mm bone screw - 4 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST842 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 8mm bone screw - 4 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST843 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 4mm bone screw - 10 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST844 Delta Resorbable Plating System Resorbable plates and screw fixation 2.2 x 6mm bone screw - 10 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST845 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 4mm bone screw - 1 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 602 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST846 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 6mm bone screw - 1 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST847 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 8mm bone screw - 1 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST848 Delta Resorbable Plating System Resorbable plates and screw fixation 2.6 x 10mm bone screw - 1 per pack Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
ST849 Delta Resorbable Plating System Resorbable plates and screw fixation Mesh and Panel 55 x 55 (1.4mm Only to be funded system for the fixation of facial fractures where used in a service
for which a Medicare Benefit is payable
Screws, Bone
Aus Systems Pty LtdAU035 Aus Systems Titanium Bone Screws Screws 2mm & 2.3mm diameter 4mm - 15mm length Only to be funded
where used in a service for which a Medicare Benefit is payable
AU043 Aus Systems Titanium Bone Screws Screws 1.5mm & 1.8mm diameter 3mm - 11mm length Only to be funded where used in a service for which a Medicare Benefit is payable
Johnson & Johnson Medical Pty LtdJJ201 Bioplate Bone Screw Titanium cranial fixation system 1.5mm diam, 3-6mm length; pack of 5 Only to be funded
where used in a service for which a Medicare Benefit is payable
JJ202 Bioplate Bone Screw Titanium cranial fixation system 1.5mm diam; 10mm length; pack of 5 Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 603 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ203 Bioplate Bone Screw Titanium cranial fixation system 1.5mm diam; 8mm length; pack of 5 Only to be funded where used in a service for which a Medicare Benefit is payable
JJ215 Bioplate Bio-100 Screw Titanium cranial fixation system 2.4mm diam; pack of 5 Only to be funded where used in a service for which a Medicare Benefit is payable
Medtronic Sofamor Danek Australia Pty LtdSD018 TiMesh Rigid Fixation Bone Grafting and Titanium, Screw - Cruciate Head, 12 Diameter 1.0mm - 2.4mm, length 2 - Only to be funded
Plating System point Flat Head where used in a service for which a Medicare Benefit is payable
Stryker Australia Pty LtdSK147 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Smartlock Emergency Only to be funded
Screws fixation of mandibular fractures and Screws, 2.7mm Diameter, 8mm - 20mm where used in a service for which a Medicare Benefit is payable.
SK148 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Screws, Emergency, Only to be funded Screws fixation of mandibular fractures and 2.7mm Diameter, 8-20mm Length where used in a service
for which a Medicare Benefit is payable.
SK149 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Screws, 2.0mm Dia, Only to be funded Screws fixation of mandibular fractures and 4-14mm Length; Universal Mandible where used in a service
Screws, 2.3mm Dia, 4-14mm Length for which a Medicare Benefit is payable.
SK150 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Smartlock Screws, Only to be funded Screws fixation of mandibular fractures and 2.0mm Diameter, 16mm-20mm Length; where used in a service
Universal Mandible Smartlock Screws, for which a Medicare 2.3mm Diameter, 18mm-20mm Length Benefit is payable.
SK151 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Screws, 2.0mm Only to be funded Screws fixation of mandibular fractures and Diameter, 16mm-20mm Length; where used in a service
Universal Mandible Screws, 2.3mm for which a Medicare Diameter, 16mm-20mm Length Benefit is payable.
SK152 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Lag Screws, 2.0mm Only to be funded Screws fixation of mandibular fractures and Diameter, 24mm-42mm Length where used in a service
for which a Medicare Benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 604 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SK153 Leibinger Screw - Universal Mandibular Items used for reconstruction and Universal Mandible Smartlock Screws, Only to be funded Screws fixation of mandibular fractures and 2.0mm Diameter, 4mm-14mm Length; where used in a service
Universal Mandible Smartlock Screws, for which a Medicare 2.3mm Diameter, 4mm-16mm Length Benefit is payable.
SK299 Leibinger Screw (Various) - Universal 1.2mm Diameter, 3-12mm Length; Only to be funded CMF Screws 1.4mm Diameter 3-9mm Length where used in a service
for which a Medicare Benefit is payable
SK300 Leibinger Screw (Various) - Universal Self Drilling, 1.2mm Diameter, 3-4mm Only to be funded CMF Screws where used in a service
for which a Medicare Benefit is payable
SK301 Leibinger Screw (Various) - Universal 1.7mm Diameter, 3-12mm Length; Only to be funded CMF Screws 1.9mm Diameter, 3-9mm Length where used in a service
for which a Medicare Benefit is payable
SK302 Leibinger Screw (Various) - Universal Self Drilling, 1.7mm Diam; 3-6mm Only to be funded CMF Screws where used in a service
for which a Medicare Benefit is payable
SK303 Leibinger Screw (Various) - Universal Locking, 1.7mm Diameter, 4-6mm Only to be funded CMF Screws Length; Locking 1.9mm Diameter, 5mm where used in a service
for which a Medicare Benefit is payable
SK385 Universal System Condyle Fastening Screws One size onlyST082 Leibinger Screws Leibinger IMF: cross-slot screws 2.0x8mm, 2.0x14mm, 2.0x20mm Only to be funded
where used in a service for which a Medicare Benefit is payable
ST083 Leibinger Screws Leibinger Steinhauser Screw System: 2.0x4-12mm Only to be funded cross-slot screws Titanium where used in a service
for which a Medicare Benefit is payable
ST084 Leibinger Screws Leibinger Steinhauser Screw System: 2.0x13-22mm Only to be funded cross-slot screws Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 605 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST085 Leibinger Screws Leibinger COM/MAND Fixation System: 2.3x6-9mm Only to be funded emergency screws Titanium where used in a service
for which a Medicare Benefit is payable
ST107 Leibinger Screws Micro Bone Screws: square fit, self- 1.0 x 2-9mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST108 Leibinger Screws Micro Plus Bone Screws: square fit, self- 1.2 x 2-12mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST110 Leibinger Screws Micro Plus Bone Emergency Screws: 1.4x3-11mm Only to be funded square fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST111 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 1.7x3-12mm Only to be funded square fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST113 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 1.9x5mm, 1.9x7mm Only to be funded square fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST114 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 2.0x4-19mm Only to be funded square fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST115 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 2.3x6-9mm Only to be funded square fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST116 Leibinger Screws Leibinger Wurzburg COM/MAND 2.7x6-16mm Only to be funded Fixation System: emergency screws where used in a service
for which a Medicare Benefit is payable
ST117 Leibinger Screws Leibinger Wurzburg COM/MAND 2.7x18-22mm Only to be funded Fixation System: emergency screws where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 606 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST118 Leibinger Screws Leibinger Wurzburg COM/MAND 3.0x8-22mm Only to be funded Fixation System: emergency screws where used in a service
for which a Medicare Benefit is payable
ST145 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.2x2-6mm Only to be funded self tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST146 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.2x7-10mm Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST147 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.2x11-12mm Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST148 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.4x3mm, 1.4x5mm Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST149 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.4x7mm, 1.4x9mm Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST150 Leibinger Screws Leibinger Micro Plus Screws: cross-slot, 1.4x11mm Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST236 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 1.7 diameter X 3-4mm Only to be funded cross-fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST237 Leibinger Screws Leibinger Mini Wurzburg Bone Screws: 1.7 diameter X 5-6mm Only to be funded cross-fit, self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST238 Leibinger Screws Leibinger Autopilot Bone Screws 1.7x7-8mm Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 607 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST239 Leibinger Screws Leibinger Mini Wurzburg Bone Screws 1.7x7-8mm Only to be funded Titanium where used in a service
for which a Medicare Benefit is payable
ST240 Leibinger Screws Leibinger Mini Wurzburg Emergency 1.9 x 5mm Only to be funded Screws Titanium where used in a service
for which a Medicare Benefit is payable
ST241 Leibinger Screws Leibinger Bone Screws: hex fit, self- 2.0 x 4-5mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST242 Leibinger Screws Leibinger Bone Screws: hex fit, self- 2.0x 6-7mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST243 Leibinger Screws Leibinger Bone Screws: hex fit, self- 2.0 x 9-10mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST244 Leibinger Screws Leibinger Bone Screws: hex fit, self- 2.0 x 11mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST258 Leibinger Screws Leibinger Dynamic bone Screws: self- 2.7 x 8mm, 12mm, 14mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST325 Leibinger Screws Leibinger Low Profile Screws: low profile 1.5x4-13mm, 2.0x4-20mm, 2x21mm, Only to be funded head, self-tapping screws Titanium. 2x24mm. Pack of 5 where used in a service
for which a Medicare Benefit is payable
ST345 Leibinger Screws Leibinger Micro Screws: cross-slot, self- 1.0x2-6mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST346 Leibinger Screws Leibinger Micro Screws: cross-slot, self- 1.2x2mm, 1.2x5mm Only to be funded tapping Titanium where used in a service
for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 608 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST355 Leibinger Screws Leibinger Dumbach Mesh System: bone 2x5-15mm Only to be funded screws Titanium. Pack of 10 where used in a service
for which a Medicare Benefit is payable
ST358 Leibinger Screws Leibinger - Salzburg Lag Screw System: 2 holes Only to be funded locking plate, Titanium, with biconcave where used in a service washers for which a Medicare
Benefit is payable
ST359 Leibinger Screws Leibinger - Salzburg Lag Screws 2x7mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST360 Leibinger Screws Leibinger - Salzburg Lag Screws 2x9mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST361 Leibinger Screws Leibinger - Salzburg Lag Screws 2x11mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST362 Leibinger Screws Leibinger - Salzburg Lag Screws 2x13mm, 2x15mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST363 Leibinger Screws Leibinger - Salzburg Lag Screws 2x17mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST364 Leibinger Screws Leibinger - Salzburg Lag Screws 2x19mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST365 Leibinger Screws Leibinger - Salzburg Lag Screws 2x21mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST366 Leibinger Screws Leibinger - Salzburg Lag Screws 2x24mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
PART A - Prostheses List by Category, Groups and Sponsor Page 609 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ST367 Leibinger Screws Leibinger - Salzburg Lag Screws 2x30mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST368 Leibinger Screws Leibinger - Salzburg Lag Screws 2x33mm. Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST377 Leibinger Screws Leibinger Forefoot Screws: hexagonal fit, 2.3x16mm, 2.3x18mm, 2.3x20mm, Only to be funded self-tapping Titanium where used in a service
for which a Medicare Benefit is payable
ST446 Wurzburg Bone Plates Wurzburg Mandibular Fracture plate: 4 hole x 35mm Only to be funded straight Titanium where used in a service
for which a Medicare Benefit is payable
ST510 Wurzburg Titanium Bone Screws Wurzburg Bone Screws Titanium 3.5x10mm Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST511 Wurzburg Titanium Bone Screws Wurzburg Bone Screws Titanium 3.5x12mm Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST512 Wurzburg Titanium Bone Screws Wurzburg Bone Screws Titanium 3.5x14mm Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
ST513 Wurzburg Titanium Bone Screws Wurzburg Bone Screws Titanium 3.5x16mm Pack of 10 Only to be funded where used in a service for which a Medicare Benefit is payable
Surgiplas MedicalSP021 Screws Micro, Maxi & Self Drilling 1.2mm x (2 - 14)mm, Only to be funded
1.5mm/1.9mm/2.7mm safety, 2.4mm x where used in a service (4 - 22)mm, 2.7mm x (8 - 20)mm safety, for which a Medicare 1.6mm x (4 - 8)mm self drilling, 2.0mm Benefit is payablex (4 - 8)mm self drilling;1.2mm self-
PART A - Prostheses List by Category, Groups and Sponsor Page 610 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
SP022 Screws Mini 2.0mm x (4-22)mm; Guidewire (0.8 - Only to be funded 3.0)mm x (100 - 300)mm where used in a service
for which a Medicare Benefit is payable
TiMax Surgical Pty LtdTI002 TiMax Titanium Bone Screws Self-tapping 1 - 2.7mm Diameter, 2 - 22mm Length Only to be funded
where used in a service for which a Medicare Benefit is payable
Screws, Cranioplasty Plate
Mondeal Medical Systems Pty LtdMD029 Mondeal Medical Systems Implant & Screw 2000 Standard 4mm - 19mm Only to be funded
Prostheses where used in a service for which a Medicare Benefit is payable
MD035 Mondeal Medical Systems Implant & Screw 2000 Cross Fit, Lock Drive 4mm - 19mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
MD051 Mondeal Medical Systems Implant & Screw 1700 Cross Fit, Lock Drive 3mm - 17mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
MD066 Mondeal Medical Systems Implant & Screw 1000/1200 Cross Fit, Lock Drive 3mm - 15mm Only to be funded Prostheses where used in a service
for which a Medicare Benefit is payable
Tissue Reconstructive Materials
Global Scientific Pty LtdGS204 Integra Artificial Skin - Medium - 10 x 25cmGS205 Integra Artificial Skin - Small - 10 x 12.5cmGS206 Integra Artificial Skin - Large - 20 x 25cm
PART A - Prostheses List by Category, Groups and Sponsor Page 611 of 666
PLASTIC AND RECONSTRUCTIVE Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Tissue Reconstructive Materials, Solid
Endotherapeutics Pty LtdET014 BioPlastique Sterile, textured, highly cross linked 1.0 cc unit Only to be funded
polydimethylsiloxane elastomer implants where used in a service suspended in a bio-excretable carrier gel. for which a medicare
benefit is payable.
PART A - Prostheses List by Category, Groups and Sponsor Page 612 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Anchor, Fixation
American Medical SystemsAM009 Influence In-Tac Anchor Titanium bone anchor with polypropylene One size only
monofilament No.1 suture.
Mentor Medical SystemsMN009 CINCH Bladder Neck Suspension Anchor Anchor fixation device 4mm Anchors
Catheterization Kits
Monarch MedicalMH003 Acucise RP35 Procedural Pack Composition: Polypropylene & Titanium One size only Temporary approvalMH007 Acucise RP35 Procedural Starter Pack Polypropylene and Titanium One Size Only Temporary approval
Catheters, Nephrostomy
William A Cook Aust Pty LtdWC060 Ulrathane Cope Nephroureterostomy Uro-Radiology, ultrathane French Sizes 8.5,10.2 Distal French Size
Catheters 6.0,7.0,8.5,10.2 Distance Between Pigtails 22,24,26,28 cm Tip Configuration PIG-COPE-(A,B)
Clips, Fallopian Tube
Device Technologies Australia Pty LtdDE085 Falope-Ring Bands Fallopian Tube Clip (each) 5mm - 12mm
Endocorp Pty LtdEC001 Hulka Clip -
PART A - Prostheses List by Category, Groups and Sponsor Page 613 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clips, Tube
Femcare Australia Pty LtdFE001 Filshie Clip Titanium One size only
Collagen, Injectable
Bard Australia Pty LtdBA041 Contigen Cross Linked Collagen Contigen Bard Collagen Implant for 2.5cc per syringe
Stress Urinary Incontinence
Electrodes, Dorsal Column
Medtronic Australasia Pty LtdMC180 Sacral Nerve Stimulation Unilateral Interstim Temporary test stimulation lead. 28 cm
(Medtronic model # 3080 and 3886 Sacral Nerve Stimulation Lead). Platinum / Iridium, polyurethane.
Electrodes, Neuromuscular Stimulator
Medtronic Australasia Pty LtdMC175 Neo-anal sphincter stimulator implant Implantable intramuscular assist lead, 35-50 cm
Dynamic Graciloplasty Lead. Platinum iridium, polyurethane, polypropylene.
Mesh
American Medical SystemsAM019 MONARC Sling System Product includes - mesh and two needles One Size Only
with handles attached
PART A - Prostheses List by Category, Groups and Sponsor Page 614 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mesh, Polymeric
American Medical SystemsAM013 Triangle Sling with surgical mesh Silicone Coated sling with surgical mesh, 10 x 10cm - 144 x 144cm
used in sling procedures for treatment of stress urinary incontinence.
AM014 Sparc Sling System Polypropylene mesh sling, two needles One size onlywith rotating handles, two cystoscopy aids
AM017 InVance Male Sling System Kit includes inserter with shaft, 6 bone One Sizescrews with suture and silicone-coated sling surgical mesh
AM018 Straight-In Sacral Colpopexy System Kit includes inserter, 2 x loop screws, "Y" Shaft 28cm shaped sling graft
AM023 IntePro Large Pore Polypropylene Y-Sling Large pore polypropylene mesh One sizeAM024 BioArc TO Subfascial Hammock sterile, single use procedure kit with two One size
stainless steel curved needle passers and two y-mesh assemblies. Polypropylene.
AM025 BioArc SP Sling Kit sterile, single use procedure kit with two One sizestainless steel curved needle passers and two y-mesh assemblies. Polypropylene.
AM026 Perigee Transobturator Anterior Prolapse 4 helical shaped needles with handles, 4 One sizeRepair System synthetic graft arms enclosed in plastic
with a centre "cape" mesh.
AM027 Apogee Vault Suspension System 2 stainless steel curved needles with One sizehandles, a large pore polypropylene mesh attached in the centre of a polypropylene mesh enclosed in plastic sheaths and two
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS111 IVS Tunneller System Consists of a tunneller, 2 stylets and one One size
50cm length of polypropylene mesh in a sterile blister pack
AS112 IVS Tunneller System Consists of a tunneller, 2 stylets and two One size50cm lengths of polypropylene mesh in a sterile blister pack.
PART A - Prostheses List by Category, Groups and Sponsor Page 615 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Boston Scientific Pty LtdBS078 Advantage Transvaginal Mid-Urethral Polypropylene smooth mesh material One size only
Sling System, Lynx Suprapubic Mid-Urethral Sling System, Obtryx Transoburator Mid-Urethral Sling System
EMT Healthcare Pty LtdEM011 Intramesh Reinforcement Mesh Polypropylene or polyester + silicone sub- 10 x 420mm, 11 x 400mm
urethral reinforcement tape
Plugs
N Stenning & Co Pty LtdNG045 Essure System Stainless steel, polyester fibre One size only, 2 per pack Only to be funded when
provided in a hospital/day hospital. To be reviewed in three years (2004) to assess whether the place of insertions is still
Procedure Trays, Surgical
American Medical SystemsAM016 In-Fast Kit and InteMesh Sling System Items included in kit - inserter, 2 screws One size only
with sutures, silicone coated sling mesh
Prostheses, Bladder Support
American Medical SystemsAM012 Triangle Sling Gelatin Coated Polyester sling, used in 18 x 55 mm
sling procedures for treatment of stress urinary incontinence.
Endotherapeutics Pty LtdET043 Safyre Autofixation System Urinary incontenence sling made of One size only
polydimethysiloxane and polyproplene
PART A - Prostheses List by Category, Groups and Sponsor Page 616 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Johnson & Johnson Medical Pty LtdJJ070 TVT (Tension-Free Vaginal Tape) Single Undyed Prolene (polypropylene) 11 x 450mm
use device nonabsorbable tape
Prostheses, Penile
American Medical SystemsAM004 AMS 700 Series Inflatable Penile Ambicor, 700CX, 700CXM, 700 Ultrex, Reservoir: 50, 65 & 100ml; Cylinders When provided in
Prostheses with Inhibizone 700 Ultrex Plus; anti-microbial coating range: 12 - 21cm; Pump: one size only association with Medicare Benefits Schedule Item 37429,
AM005 Penile Implant - Malleable AMS 600M, AMS 650 Cylinders range: 12 -20cm When provided in association with Medicare Benefits Schedule Item 37429,
AM022 AMS Penile Prostheses Inflatable Ambicor, 700CX, 700CXM, 700 Ultrex, Reservoir: 50, 65 & 100ml; Cylinders When provided in 700 Ultrex Plus range: 12 - 21cm; Pump: one size only association with
Medicare Benefits Schedule Item 37429,
Medical Device Alliance Pty LtdMP002 Malleable Penile Implant Consists of a membrane, filler product 14-23cm When provided in
and silicone tube association with Medicare Benefits Schedule Item 37429,
Mentor Medical SystemsMN005 Inflatable Penile Prostheses-Implant Start- Saline filled penile implant 10cm,12,14,16,18,20,22. When provided in
Up Pack association with Medicare Benefits Schedule Item 37429,
MN006 Malleable Penile Prostheses Malleable rod implant 9ml,11ml and 13ml When provided in association with Medicare Benefits Schedule Item 37429,
MN022 Titan Inflatable Penile Prosthesis with Saline-Filled Penile Implant 10cm, 12cm, 14cm, 16cm, 18cm, 20cm, 22cm Cylinder Lengths
PART A - Prostheses List by Category, Groups and Sponsor Page 617 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Penile, Rod
American Medical SystemsAM020 DURA II, Positionable Penile Prosthesis Concealable penile prosthesis Diameter 10mm and 12mm; Proximal tip
lengths 1-9cm; Distal tip lengths 1-9cm
Prostheses, Soft Tissue
Incision Pty LtdIP004 Durasphere - Injectable Bulking Agent, Pyrolitic carbon coated beads in a beta 1ml, 3ml
Incision Grafts Implants & Prostheses, glucan carrier gel, 15 inch 18G needle, Non animal origin sterile 3.5 inch 128G needle, 1.5 inch 18G bent
Prostheses, Testicle
American Medical SystemsAM015 AMS Testicular Prostheses Solid silicone elastomer with suture hole Small, Medium, Large When provided in
association with Medicare Benefits Schedule Item 45051 preparatory to a subsequent surgical service not precluded from attracting
Endotherapeutics Pty LtdET028 Promedon Testicular Prosthesis Silicone Elastomer Small - 31 x 23 mm, Medium - 37 x 28 When provided in
mm, Large - 42 x 32 mm, Xlarge association with Medicare Benefits Schedule Item 45051 preparatory to a subsequent surgical service not precluded from attracting
PART A - Prostheses List by Category, Groups and Sponsor Page 618 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Mentor Medical SystemsMN007 # Testicular Prosthesis Saline and gel filled implant Small, Medium, Large When provided in
association with Medicare Benefits Schedule Item 45051 preparatory to a subsequent surgical service not precluded from attracting
Surgiplas MedicalSP002 Testicular Implant Silicone Elastomer Small / Medium / Large When provided in
association with Medicare Benefits Schedule Item 45051.
Technology For Life Pty LtdTE003 # Micro Textured Testicular Implant Silicone Enhanced Small, Medium, Large, Ex-large When provided in
association with Medicare Benefits Schedule Item 45051.
Prostheses, Tibial
Medtronic Australasia Pty LtdMC323 ACT Device Adjustable continence therapy patient Female 6-9cm, Male 12-14cm
pack with two implantable devices, periurethral implantable prosthetic with a two lumen extrusion and an hydraulically expandable balloon on each distal end with an injectable port on proximal end
Prostheses, Urethral
American Medical SystemsAM003 Urolume Plus TM Endo Urethral Endourethral wall stent for urethral Range: 1.5 - 4.0cm When provided in
prostheses strictures, DESD and BPH association with Medicare Benefits
Schedule Item Number
PART A - Prostheses List by Category, Groups and Sponsor Page 619 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Kvinno Centre Pty LtdKV001 Petros Pelvic Ligament Anchor (PPLA) One Size Only
Medical Device Alliance Pty LtdMP001 Inflatable Periurethral Constrictor Consists of a membrane, filler product One size only
and silicone tube
Prostheses, Urethral Sphincter
American Medical SystemsAM001 Artificial Urinary Sphincter Cuff, Pump, Pressure Regulating Balloon, Cuff range: 4 - 11cm Balloon range: 51 -
Accessory Package, Deactivation Package 80cm
AM021 AMS 800 Artificial Urinary Sphincter Silicone cuff for artificial urinary sphincter 4.0cm - 11.0cm (increases in 0.5cm sizes)
Mentor Medical SystemsMN008 Urethrin Teflon Paste Kit Female or male kit One size only
Prosthesis, Bowel Sphincter
American Medical SystemsAM002 Artificial Bowel Sphincter Cuff, Pump, Pressure Regulating Balloon, Narrow cuff range: 7 - 14cm, Standard
Accessory Package, Deactivation Package cuff range: 8 - 14cm Balloon range: 71 -
Endotherapeutics Pty LtdET041 PTP Implants PTP Implants are solid, irregularly One size only
textured medical grade Polydimethyisiloxane Elastomer implants suspended in a hydrogel carrier
PART A - Prostheses List by Category, Groups and Sponsor Page 620 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prosthesis, internal, incontinence
Johnson & Johnson Medical Pty LtdJJ442 Gynecare TVT-O Items included are: Gynecare TVT 1.1x45 cm
Obturator device, Two Gynecare TVT Helical Passers and a Gynecare TVT Atraumatic Winged Guide. The device component of the system consists of undyed or blue Prolene Polypropylene
Medtronic Australasia Pty LtdMC327 Adjustable Continence Therapy ACT Device: prosthesis designed for the 6, 7, 8 & 9cm
treatment of female SUI comprising of silicone balloons x 2 attached via a conduit to titanium and rubber ports allowing for post operative adjustment.
MC342 Adjustable Continence Therapy for Men ProACT Device: prosthesis designed for 12 & 14cmthe treatment of male SUI comprising of silicone balloons x2 attached via a conduit to titanium and rubber ports allowing for post operative adjustment.
Rings, Fallopian Tube In The
Femcare Australia Pty LtdFE002 Fallopian Tube Rings (Pair) Silicone One size only
Screws, Bone
American Medical SystemsAM010 Influence Bone Screw Bone screw with pre-attached 5.5 x 1.7 mm
polypropylene monofilament suture. For incinsionless tranvaginal sling procedure. Loop Screw Bone Screw
PART A - Prostheses List by Category, Groups and Sponsor Page 621 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AM011 Influence Bone Screw Bone screw with pre-attached 5.5 x 1.7 mmpolypropylene monofilament suture. For incinsionless tranvaginal sling procedure. In-Fast Bone Screw
Stents
Bard Australia Pty LtdBA042 Memotherm Prostatic Stents Memotherm Prostatic Urethral wall Stent 36Fr, 20mm to 60mm in 5mm When provided in
increments; 42Fr, 20mm to 60mm in association with Medicare Benefits Schedule Item Number
William A Cook Aust Pty LtdWC126 Cook Urethral Stents Firlit-Kluge uretheral stent French 8 - 10, length 30cmWC136 Cook Urethral Stent Kaontz urethral stent French 8 - 10, length 12cmWC137 Cook Ureteral Stent Pediatric Urethral C- Stent, Stylet 10 fr 15cm; 13 fr 15cmWC162 Cook Ureteral Stent - Tarkington Urethral Stent, Wire 8 fr
Stent
Stents, Ureteral
Bard Australia Pty LtdBA043 Ureteral Stent Angiomed Urosoft Double J with or 4.7Fr- 20, 22, 24, 26, 28cm, 6Fr- 20, 22,
without guide wire 24, 26, 28cm, 7Fr- 20, 22, 24, 26, 28cm, 8Fr- 20, 22, 24, 26, 28cm
BA044 Ureteral Stent Bard Inlay Hydrophilic coated Pigtail (Inlay) 4.7Fr 14, 20, 22, 24, 26, 28cm. Ureteric stent without guidewire; Bard 6Fr- 14, 20, 22, 24, 26, 28cm 7Fr 14, Flouro 4 Silicone Multilength ureteric 20, 22, 24, 26, 28cm 8Fr- 14, 20, 22, stent with guidewire; Urinary Diversion 24, 26, 28cm. (Flouro) Multilength Stent All Silicone 4,6,7,and 8fr. (Diversion) 7Fr x 90cm
Boston Scientific Pty LtdBS038 Percuflex; Percuflex Plus; Percuflex Tail; Each Stent contains a ureteral stent with Size: 4Fr to 14Fr, Length: 10cm to 95cm
Percuflex Tail Plus; Contour; Contour attached suture and a stent positioner. If VL; Stretch VL Flexima; Retromax Plus; packaged as a set, the set will contain the Polaris; Urinary Diversion Soft (Ureteric ureteral stent, stent positioner and
PART A - Prostheses List by Category, Groups and Sponsor Page 622 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Device Technologies Australia Pty LtdDE014 Ureteral Stents Single J Ureteric Stent, silicone 7 - 8.5 F x 90cmDE015 Ureteral Stents Double J Ureteric Stent, silicone 6-8.5 F, 12 - 24 cmDE016 Ureteral Stents Diversion Stent, silicone 7 - 8.5 F x 90cmDE017 Ureteral Stents Nephro Stent, silicone 6 - 8.5 F, 25-58cmDE165 Quadra-Coil Multi Length Ureteral Stent Tecoflex polymer, hydrophilic 4.5F-8.5F x length 22 - 28cm
coating/PTFE coating
Endotherapeutics Pty LtdET012 Optimed Ureteric Stents Soft-Polyurethane. Ureteral. Paediatric Ureteral 4.5 x 28,30,32 cm; 6 x
Ureteral. Renal Transplantation. Urinary 26,28,30,32 cm; 7 x 26,28,30,32 cm. Diversion. Paediatric Ureteral 8 x 28,30,32 cm.
Renal Transplantation 4 x 10,12,14,16 cm; 6 x 12,14,16 cm; 7 x 12,14,16 cm. Urinary Diversion 8 x 12,14,16 cm.
Endovision Pty LtdED001 Memokath Ureteric Stent Dual Expansion. Model 049USD, Length 60mm
Thermoexpandable, Nickel - titanium
ED002 Memokath Ureteric Stent Model 051CW, Thermoexpandable, Lengths 30mm - 100mmNickel - Titanium
ED003 Memokath Urethral Stent Dual Expansion. Models 045T, 045W, Lengths 5mm - 90mm045TTW, Thermoexpandable, Nickel - titanium
ED006 Memokath Ureteric Stent Model 051CW, Thermoexpandable, Length 100mm - 200mmNickel-Titanium
Monarch MedicalMH002 Ureteral Stents Soft vertex, hydrophilically coated with 7/10F only, length 20, 22, 24, 26, 28, 30cm
radiopaque markers
MH005 Ureteral Stents Composition - Soft vertex, hydrophilically Outer dia 5F, length 14, 16, 18, 20, 22, coated with radiopaque markers 24, 26, 28cm; Outer dia 6F, length 22,
24, 26, 28, 30cm; Outer dia 7F, length 22, 24, 26, 28, 30cm; Outer dia 8F, length 22, 24, 26, 28, 30cm
N Stenning & Co Pty LtdNG028 DD Ureteric Tumor Stent Set Open/Closed end with introducer and 20 - 28cm
guide wire, Polyurethane
PART A - Prostheses List by Category, Groups and Sponsor Page 623 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
NG029 DD Ureteric Valve Stent Set Open end with introducer and guide wire, 22 - 30cm Polyurethane
NG030 Paediatric Ureteric Valve Stent Set Open end with introducer and guidewire, 12 - 22cmPolyurethane
NG031 Paediatric Ureteric Integral Stent Set Open end with introducer and guide wire, 12 - 22cm Polyurethane
NG032 DD Ureteric Stent Set Open end with introducer and guide wire 22 - 30cm
William A Cook Aust Pty LtdWC002 Sof-Flex Multilength Ureteric Stent Set Set includes Stent, Wire, Positioner, 3 - 8Fr, Length 22 - 32cmWC003 Sof-Flex Multilength Ureteric Stent with Stent, Positioner 4.7 - 8Fr, Length 22 - 32cm
Set Variations
WC009 Sof-Flex AQ Double Pigtail Stent Set with Options - retrieval tether, multi-length, 4.7 - 6Fr, Length 22 - 32cm Options slip coat removable core wire, stent
positioner, without a ureteral catheter,
WC018 C-Flex Endoureteratomy Stent Set 6 - 7Fr, Length 22 - 28cmWC020 Towers Peripheral Ureteral Stent Set 6, 7Fr, Length 20, 22 - 32cmWC021 C-Flex Double Pigtail Stent Set with 3.7 - 8Fr, Length 8 - 32cmWC022 C-Flex Double Pigtail Stent Set 3.7 - 8Fr, Length 8 - 30cm: Multi-length
22 - 32cm
WC023 Greene Renal Transplant Stent Set 5 - 8.5Fr, Length 8 - 20, 32cmWC024 Ultrathane Endoureteratomy Stent Set 6, 7Fr, Length 18 - 26cmWC027 Polyurethane Double Pigtail Stent Set 4 - 8Fr, Length 8 - 30cmWC028 Black Silicone Stent Set with Options 6 - 8Fr, Length 20 - 30cmWC029 Black Silicone Double Pigtail Stent Set 6 - 8Fr, Length 20 - 30cmWC031 Bander Ureteral Diversion Stent Set Left, right 7, 8Fr, Length 75, 90cmWC034 Sof-Flex AQ Double Pigtail Stent Set 4.7 - 7Fr, Length 22 - 32cm; multi-
lengths 22 -32 cm
WC035 Multi-length Endosof Ureteral Stent Set With hydrophilic coating and with P 6Fr, Length 22 - 32cmWC086 Cook Ureteral Stents Composition - Stent is Polyethylene - French 3fr, length 6 -
polyethalene/teflon, Kit includes Stent, 14cm; Teflon - French 3fr - 4fr, 6 -
WC104 Cook Ureteral Stent - Sof-Flex Double Radiopaque Sof-Flex Stent, Stainless French 4.7, 6, 7, length 8-22cm, 4-12cmPigtail Stent Set - Special Steel Wire Guide, Radiopaque
Polyurethane Catheter and Radiolucent
PART A - Prostheses List by Category, Groups and Sponsor Page 624 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC125 Cook Ureteral Stent Towers peripheral ureteral stent and French 6 - 7, length 22 - 32cmpositioner only
WC128 Cook Ureteral Stent Bander ureteral diversion left and right French 4.7 - 8, length 75cmWC130 Cook Ureteral Stent Endo-Sof Double Pigtail Stent with French 5, 6, 7, 8 - 20, 22, 24, 26, 28cm
AQ(R) Hydrophilic Coating
WC131 Cook Ureteral Stent Endo-sof double pigtail stent with French 5 - 7, length 20 - 28cmWC138 Cook Ureteral Stent Filiform Double Stent, Wire, Positioner 6-8 fr 20-30cm
Pugtail Silicone Stent Set
WC139 Universal Double Pigtail Stent Stent, Roadrunner Wireguide, Positioner, 5-6 fr, 22-32cmCatheter
WC140 Cook Ureteral Stent Filiform Multilength Stent, Wire, Positioner 5-8 fr 8-20cm; 5-8 fr 22-32cmSilicone Stent Set
WC142 Cook Ureteral Stent Filiform Multilength Stent and Positioner Only 5-8 fr 8-20cm; 5-8 fr 22-32cmSilicone Stent and Positioner Only
WC143 Cook Ureteral Stent Filiform Double Stent and Positioner 6-8 fr 20-30cmPigtail Silicone Stent and Positioner Only
WC146 Universal Double Pigtail Stent Stent, Wireguide, Positioner, Catheter 5-6 fr, length 22-32cmWC147 Cook Ureteral Stent Kwart Retro-Inject Stent, Wire, Inserter, Release Sleeve 4.7-8 fr, length 22-32cm
Stent Set
WC148 Universal Double Pigtail Stent Stent and positioner only 5-6 fr, length 22-32cmWC149 Sof-Flex Double Pigtail Ureteric Stent Stent, Positioner 4.7 - 10Fr, Length 12 - 30cm
with Set Variations
WC150 Sof-Flex Double Pigtail Ureteric Stent Set Set includes Stent, Wire, Positioner, 3 - 10Fr, Length 10 - 28cmWC165 Cook Ureteral Stent Davies Percutaneous Ureteral Stent with 7 fr, 8.5 fr, Length: 22-28cm
Peel-A-Way Introducer
WC193 Cook Ureteral Stent Endo-Sof Double Pigtail Stent Set 6fr; 24 and 26cmWC214 Cook Ureteral Stents Amplatz Ureteral Stent Set, Ultrathane RB 8.5Fr - 12,20,22,24,26,28cm and 10.2Fr
Design Radioplaque Band and AQ - 22,24,26,28cmHydrophilic Coating Set includes one stent positioner with flexible stent introducer catheter
PART A - Prostheses List by Category, Groups and Sponsor Page 625 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stents, Urethral
Boston Scientific Pty LtdBS037 Microvasive Ultraflex - urethral stent Self expanding, Nitinol, metallic stent 20mm - 50mm
Device Technologies Australia Pty LtdDE208 Urocoil Uretheral Stent Bio-compatible alloy Urocoil - 30 x 40, 50, 60, 70, 80mm;
Urocoil -S - 30 x 40, 50, 60, 70, 80mm; Urocoil Twin - 30 x 40/40, 40/50,50/50,
Endotherapeutics Pty LtdET010 Horizon Prostatic Stent Nitinol 2.0, 2.5, 3.0, 3.5, 4.0 cm
Endovision Pty LtdED004 Memokath Urethral Stent - Single Models: 028S, 028SW, 028T, 028TW, Length 15 - 90mm
044T, 044TW Nickel-Titanium,
Stimulators
Medtronic Australasia Pty LtdMC291 Sacral Nerve Stimulation Lead Model 4 electrode tined lead - platinum iridium, 28 CM
3093 TINED LEAD electrodes 0, 2, 3 are 3mm,electrode 1 is 10mm and coiled, spacing is 1.5mm
Stimulators, Neuromuscular, Functional
Medtronic Australasia Pty LtdMC186 Sacral Nerve Stimulation Accessories Model 041827-002 Auxiliary screener One size only; 9-12.5cm Only to be used with
cable kit. Polypropylene. OR Model Medtronic Itrel II pulse 041828-002 Foramen Needle (box of 6). generator, model 7424.Sterile individual units. Stainless steel.
PART A - Prostheses List by Category, Groups and Sponsor Page 626 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stimulators, Urinary
Medtronic Australasia Pty LtdMC188 Sacral Nerve Stimulation Unilateral Activator. Model 3031. Polycarbonate. One size only Only to be used with
Medtronic Itrel II pulse generator, model 7424.
Tissue Reconstructive Material, Biological
Bard Australia Pty LtdBA149 Pelvicol natural implant Flexible Flat sheet of acellular porcine 4 x 18cm x 1.0mm
dermal collagen and elastin fibres
BA150 Pelvicol natural implant Flexible Flat sheet of acellular porcine 4 x 7cm x 1.0mmdermal collagen and elastin fibres
BA151 Pelvicol natural implant Flexible Flat sheet of acellular porcine 2 x 12cm x 1.0mmdermal collagen and elastin fibres
BA152 Pelvicol natural implant Flexible Flat sheet of acellular porcine 2 x 20cm x 1.0mmdermal collagen and elastin fibres
BA153 Pelvicol natural implant Flexible Flat sheet of acellular porcine 4 x 12cm x 1.0mmdermal collagen and elastin fibres
BA154 Pelvicol natural implant Flexible Flat sheet of acellular porcine 8 x 12cm x 1.0mmdermal collagen and elastin fibres
BA155 Pelvicol natural implant Flexible Flat sheet of acellular porcine 2 x 4cm x 1.0mmdermal collagen and elastin fibres
BA156 Pelvicol natural implant Flexible Flat sheet of acellular porcine 2 x 7cm x 1.0mmdermal collagen and elastin fibres
Tissue Reconstructive Materials
William A Cook Aust Pty LtdWC177 Surgisis Soft Tissue Graft Surgical Mesh composed of Sub- Length- 10cm, Width- 7cm
Intestinal Submucosa (SIS)
PART A - Prostheses List by Category, Groups and Sponsor Page 627 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC178 Surgisis Soft Tissue Graft Surgical Mesh composed of Sub- Length- 20cm, Width- 7cmIntestinal Submucosa (SIS)
WC179 Stratasis Urethral Sling Urethral Sling for Urinary Incontinence Length 10cm, Width 2cmconstructed from Sub-Intestinal Submucosa (SIS)
WC180 Stratasis Urethral Sling Urethral Sling for Urinary Incontinence Length 30cm, Width 2cmconstructed from Sub-Intestinal Submucosa (SIS)
Tissue Reconstructive Materials, Solid
Endotherapeutics Pty LtdET011 Macroplastique Sterile, textured, highly cross linked 1.3 ml & 2.5 ml
polydimethylsiloxane elastomer implants suspended in a bio-excretable carrier gel.
Tunnelers, Other
Auto Suture Company, Australia T/A Tyco Healthcare Pty LtdAS093 IVS Tunneller Stainless steel tunneller and woven One size only
synthetic tape
Urinary Catheterization/Collection Kits
Endotherapeutics Pty LtdET013 Optimed Nephrostomy Catheter PigTail & Loop, polymer composition 70 x 6,7,8,9 cm; 25 x 8.3 F; 30 x 6,7,8,
9 F; 40 x 7, 8, 9, 10, 11, 12, 13, 14 F
Urinary Drainage Units
William A Cook Aust Pty LtdWC169 Urinary Tract Stent set Endo-Sof Multilength Stent Set 5, 6, 7 fr, Length: 22-32cm
PART A - Prostheses List by Category, Groups and Sponsor Page 628 of 666
UROGENITAL Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC170 Urinary Tract Stent set Endo-Sof Double Pigtail Ureteral Stent 5, 6, 7 fr, Length: 22, 24, 26, 28cmand Positioner Only
WC171 Urinary Tract Stent set Endo-Sof Multilength Ureteral Stent and 5, 6, 7 fr, Length: 22-32cmPositioner Only
WC172 Urinary Tract Stent set Endo-Sof Double Pigtail Stent Set 5, 6, 7 fr, Length: 22, 24, 26, 28cm
PART A - Prostheses List by Category, Groups and Sponsor Page 629 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheterization Kits, Central Venous
Kendall Australasia Pty Ltd T/A Tyco Healthcare Pty LtdKA007 Mahurkar Subclavian Catheter Kit Chronic haemodialysis, long term 36, 40cm
vascular access for haemodialysis and apheresis. Constructed of radiopaque silicone rubber. Kit contains: Catheter, 18ga Introducer Needle, J/Straight 0.038" Guidewire, 10cc Syringe, Tunnelling Stylet, Pull-Apart Sheath/Dilator, (4) Gauze Sponges, (2) Wound Dressings,
KA012 Mahurkar Subclavian Catheter Kit Acute haemodialysus, short term vascular 11.5 Fr, 13.5cm Straight Extension, 11.5 access. Catheters constructed of Fr, 16cm Straight Extension, 11.5 Fr radiopaque polyurethane. Tips are made 19.5cm Straight Extension, 10 Fr 12cm of polyvinyl chloride and are more Curved Extension, 10 Fr 15cm Curved radiopaque than the rest of the catheter. Extension, 11.5 Fr 16cm Curved Kit contains: 10 or 11.5 Fr Catheter, 18ga Extension, 11.5 Fr 16cm Curved Introducer Needle, J/Straight Guidewire, Extension, 11.5 Fr 19.5cm Curved 10 Fr Dilator, 12 Fr Dilator, 2 x Adhesive
William A Cook Aust Pty LtdWC111 Cook Central Venous Catheterisation Kit Single lumen peripherally inserted catheter Fr 3, 4, 5 and Length 50 and 60cm
set, includes catheter, needle, J-wire and introducer
WC112 Cook Central Venous Catheterisation Kit Double lumen peripherally inserted Fr 6, 7 and Length 50cmcatheter set, includes catheter, needle, wire or J-wire and introducer
WC113 Cook Central Venous Catheterisation Kit Single lumen peripherally inserted catheter Fr 3, 4, 5 and Length 50 and 60cm set, includes catheter, needle, J-wire, MPIS wire and introducer
WC114 Cook Central Venous Catheterisation Kit Double lumen peripherally inserted Fr 6, 7 and Length 58 and 60cmcatheter set, includes catheter, needle, J-wire, MPIS wire and introducer
WC201 Cook Central Venous Catherisation Kits Turbo-Flo Peripherally Inserted Central 4Fr - 60cm and 5Fr - 60cmVenous Catheter Set, Single Lumen Polyurethane with Micropuncture Peel-Away Sheath Introducer and Wire Guide
PART A - Prostheses List by Category, Groups and Sponsor Page 630 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC202 Cook Central Venous Catheterisation Kits Turbo-Flo Peripherally Inserted Central 5Fr - 60cmVenous Catheter Set, Single Lumen Polyurethane with Peel Away Sheath Introducer and Wire Guide
WC203 Cook Central Venous Catherisation Kits Turbo-Flo Peripherally Inserted Central 5Fr - 60cmVenous Catheter Set, Dual Lumen Polyurethane with Peel-Away Sheath Introducer and Wire Guide
WC204 Cook Central Venous Catheterisation Kits Turbo-Flo Over-The-Wire Peripherally 4Fr - 60cm and 5Fr -60cmInserted Central Venous Catheter Set, Single Lumen Polyurethane with Micropuncture Peel-Away Sheath
WC205 Cook Central Venous Catheterisation Kits Turbo-Flo Over-The Wire Peripherally 5Fr - 60cmInserted Central Venous Catheter Set, Dual Lumen Polyurethane with Micropuncture Peel-Away Sheath
WC206 Cook Central Venous Catheterisation Kits PICC Peripherally Inserted Central 3Fr - 50cm and 4Fr and 5Fr - 60cmVenous Catheter Set, Single Lumen Silicone with Micropuncture Peel-Away Sheath Introducer and Nitinol Wire Guide
WC207 Cook Central Venous Catheterisation Kits PICC Peripherally Inserted Central 3Fr - 50cm and 4Fr and 5Fr - 60cmVenous Catheter Set, Catheter without Clamp, Single Lumen Silicone with Micropuncture Peel-Away Sheath
WC208 Cook Central Venous Catheterisation Kits PICC Peripherally Inserted Central 4Fr - 60cm and 5Fr - 60cmVenous Catheter Set, Catheter without Clamp, Single Lumen Silicone with Micropuncture Peel-Away Sheath Introducer and Nitinol Wire Guide
Catheters, Angioplasty, Laser
Pacing Importers Pty LtdPI001 Excimer Laser Stent Polyester Fibre optic catheter 2.5 and 2.2mm
PART A - Prostheses List by Category, Groups and Sponsor Page 631 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Catheters, Hemodialysis
Bard Australia Pty LtdBA140 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 15cm straight kit
Catheter guidewire introducer needle, 0.038" 70cm J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA141 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 19cm straight kitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA142 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 23cm straight kitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA143 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 27cm straight kitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA144 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 19cm pre-curved kitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
PART A - Prostheses List by Category, Groups and Sponsor Page 632 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA145 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 19cm PC2 Jugular KitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA146 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 23cm pre-curved kitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA147 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 24cm PC2 Jugular KitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA148 HemoGlide Long Term Haemodialysis Kit contents: 14.5fr catheter, 18g 28cm PC2 Jugular KitCatheter guidewire introducer needle, 0.038" 70cm
J-wire guidewire, 15fr PTFE introducer sheath, 8" tunnelling device, 10-12fr dualator vessel dilator, 2 adhesive dressings, 2 injections caps, silicone attachable suture wing, heparin label and
BA159 HemoSplit Long Term Haemodialysis HemoSplit is a carbothane long term dual Standard Kit (straight15cm to42cm and lumen catheter used to provide vascular pre-curved 19cm to31cm), access for haemodialysis. It comprises of Microintroducer Kits (straight 19cm to a double D lumen configuration catheter 42cm & pre-curved 19cm to 31cm)each lumen having an ID of 2.3mm) with a fixed split tip (to 7.5cmm) which enables blood flow rates as high as 500mls/minute. The catheter shaft has a tissue ingrowth cuff to assist tissue anchoring.
Kendall Australasia Pty Ltd T/A Tyco Healthcare Pty LtdKA008 Single Lumen Right Atrial Catheter Central Venous Catheters constructed of 84cm, 1.3mm OD, 94cm 2.2mm OD,
radiopaque silicone rubber 94cm 3.2mm OD
PART A - Prostheses List by Category, Groups and Sponsor Page 633 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
KA009 RAAF Dual Lumen Catheter Central Venous Catheter constructed of 4.5mm (Catheter), 95cm (Catheter radiopaque silicone rubber Overall Length); 3.2mm (Catheter),
102cm (Catheter Overall Length)
KA010 Triple Lumen Right Arterial Catheter Central Venous Catheter constructed of 3.9mmradiopaque silicone rubber
KA011 Permcath Dual Lumen Catheter Chronic Haemodialysis, long term 36cm, 40cmvascular access for haemodialysis and aphaeresis. Constructed of radiopaque silicone rubber. Kit contains: Catheter, 18ga Introducer Needle, J/Straight 0.038" Guidewire, 10cc Syringe, 10Fr. Dilator (28cm only), 12Fr. Dilator (except 28cm), #11 Scalpel, Tunnelling Stylet, Oval Pull-Apart Sheath/Dilator, (4) Gauze Sponges, (2) Wound Dressing, (2) Injection Sealing Caps.
KA013 Permcath Dual Lumen Catheter Chronic haemodialysis, long term 28, 36, 40cmvascular access for haemodialysis and aphaeresis. Constructed of radiopaque
Tekmed Pty LtdTK005 Medcomp Long Term Catheter sets for ASH, TESIO-BioFlex with cuff 10, 14 French 24,28,32 & 36cm lengths
Haemodialysis
TK006 Medcomp Long Term Catheter sets for HemoFlow HFS-Carbothane with cuff 14.5 French 24,28,32 & 36cm lengthsHaemodialysis
Catheters, Other
Johnson & Johnson Medical Pty LtdJJ445 ANGIOGUARD XP Emboli Capture Distal protection device and delivery system Length: 300cm, diameter: 0.014, Basket Temporary Approval,
Guidewire System sizes 4mm, 5mm, 6mm, 7mm, and 8mm pending review of product group
Catheters, Peritoneal, Long Term Indwelling
Bard Australia Pty LtdBA040 VitaCuff, Hickman Catheter Dialysis/Apheresis catheter, dual lumen, 36-45cm overall length
silicone
PART A - Prostheses List by Category, Groups and Sponsor Page 634 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Clips, Vascular
B Braun Australia Pty LtdBB016 Challenger Clip Vessel clip Medium-large Temporary Approval
Dressing Kits
Medtel Australia Pty LtdME027 Syvek Patch Closure Device One Size Only Temporary approvalME028 SyvekNT Patch (contains foam backing) Closure Device One Size Only Temporary approval
Medtronic Australasia Pty LtdMC311 Clo-Sur P.A.D. Polyprolate 4cm x 4cm
Embolization Prostheses, Intravascular
Boston Scientific Pty LtdBS014 Detachable Silicone Balloon (DSB) and Balloon (permanent implant) with co-axial Deflated O.D.: Low Detachment -
delivery system delivery system .85mm, 1.5mm, 1.8mm Medium Detachment - .85mm, 1.5mm, 1.8mm High Detachment - 1.5mm, 1.8mm; Delivery system: 6.3/4.2Fr; 7.3/5.0Fr; 8.0/5.6Fr; 9.0/6.3Fr; 90/110cm; 3.6Fr
BS018 Berenstein Liquid Coil Platinum, Helical coil 2.8mm x 1.5-30cm, 2.5mm x 1.5-30cmBS021 Fibred Platinum Coils, Braided Occlusion Platinum coil covered with dacron fibres. Delivery device lengths up to 175cm.
Device (BOD), Vortx Coils, Excelsior, Delivery systems with nitinol braid, Sizes of coils Diameter 2mm - 30mm andTracker, FasTracker, Turbotracker, Polypropylene proximal, Polyethylene lengths 2mm - 100mm.Renegade, Spinnaker Elite
BS026 Braided Occlusion Device (BOD) Fibered Platinum coil covered with dacron fibres Coils 2-30mm x3-60mmPlatinum Coil
BS027 Guglielmi Detachable Coil (GDC) Platinum Coil. 2-20mm x 4-30cm
PART A - Prostheses List by Category, Groups and Sponsor Page 635 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BS031 PVA/Contour SE for embolization and Polyvinyl alcohol foam and delivery 45-150 micron, 150-250 micron, 250-355delivery system system; Microcatheter for PVA delivery; micron, 355-500 micron, 500-710
Delivery systems with nitinol braid, micron, 710-1000 micron, 1000-1180 Polypropylene promixal, Polyethylene micron, 150-175cm/3-25cmdistal. Contour Embolisation Particles, FasTracker, Tracker, TurboTracker,
BS034 PVA Particles (contour embolisation, Polyvinyl alcohol foam with a hydrophilic 45-150 micron, 150-250 micron, 250-355Contour SE spherical shape for delivery improvements micron, 355-500 micron, 500-710
micron, 710-1000 micron, 1000-1180 micron; 1ml, 2ml
BS058 GDC Trispan 3 nitinol loops (or petal) with platinum Dia 6 - 10, 12, 14, 16mmwire wrapped around each petal, a 018 catheter delivery wire
BS072 Matrix Detachable Coils Platinum coils covered with an absorbable Length: 1 to 30cm; Diameter: 2 to 20mm copolymer
Device Technologies Australia Pty LtdDE006 Onyx System DSMO/Liquid Embolic Material 18, 20, 34 (formulations)DE175 Onyx System DSMO Liquid Embolic Material 500 Formulation
Endotherapeutics Pty LtdET006 Embospheres - 2ml per implantET007 Embospheres - 1ml per implantET008 Embospheres - .5ml per implant
Medical Vision Australia Pty LtdMF005 Nit-Occlud Coil System System for transcatheter occlusions of Dia 4 x 4mm - 14 x 6mm
PDA with spiral coils. Includes Nit-Occlud spiral coil with deployment handle
Medtel Australia Pty LtdME070 Micrus ACT Platinum Microcoil Delivery Platinum Coil Helical Stretch Resistant - 2mm x 1cm -
System 10mm x 30cm
ME085 Micrus ACT Platinum Microcoil Delivery Platinum Coil Helical - 2mm x 2cm - 10mm x 30cmSystem
ME086 Micrus ACT Platinum Microcoil Delivery Platinum Coil Helical Soft Stretch Resistant - 2mm x System 1cm - 4mm x 8cm
ME087 Micrus ACT Platinum Microcoil Delivery Platinum Coil Spherical - 2mm x 2.5cm - 19mm x System
PART A - Prostheses List by Category, Groups and Sponsor Page 636 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
ME088 Micrus ACT Platinum Microcoil Delivery Platinum Coil Straight - 4mm x 10cm - 6mm x 30cmSystem
ME133 Micrus ACT Platinum Microcoil Delivery Cerecyte Helical Cerecyte - 2mm x 2cm - 10mm x System 30cm
ME134 Micrus ACT Platinum Microcoil Delivery Cerecyte Helical Soft Stretch Resistant Cerecyte - System 2mm x 1cm - 4mm x 8cm
ME135 Micrus ACT Platinum Microcoil Delivery Cerecyte Spherical Cerecyte - 2mm x 2.5cm - System 19mm x 30cm
ME136 Micrus ACT Platinum Microcoil Delivery Cerecyte Straight Cerecyte - 4mm x 10cm - 6mm System x 30cm
William A Cook Aust Pty LtdWC037 Coil - Embolisation MWCE Standard Stainless Steel Diameters: .025, .035, .038 and .052,
Extended Lengths: 1cm to 20cm, Coil Taper Diameters: 2mm to 10mm
WC038 Coil - Embolisation Coils MWCE- Tornado Platinum Diameters: .018, .035 and .038, Coil TORNADO Taper Diameters: 2mm to 10mm
WC039 Cook Embolization Coil Hilal Platinum Diameters: .018, Extended Lengths: .5cm to 6cm, Coil Diameters: Straight to 10mm
WC173 Cook Embolisation Coils Nester Platinum Diameters: .018 and .035, Extended Lengths: 14cm, Coil Diameters: 3mm to
WC190 Detachable Mreye Embolization Coils Standard Mreye Diameters: .035 and .038, Extended Lengths: 1cm to 20cm, Coil Diameters:
WC191 Cook Intravascular Embolization Hilal Platinum (Soft) Diameters: .018; Extended Lengths: 5cm to 3cm, Coil Diameters: Straight to 10mm
WC192 Detachable Mreye Embolization Coils Jackson Mreye Diameters: .035 and .038 Extended Lengths: 4cm to 6cm Coil Diameters:
Filters, Vena Cava
B Braun Australia Pty LtdBB147 Venatech LP Vena Cava Filter Phynox, Introducer Sheath, Guidewire, Max of 43mm length, maximum of
Scalpel, Puncture Needle 35mm Diameter
BB169 Vena Cava Filter PHYNOX Introducer system, 'J' Diameter 28 mmGuidewire, Seldinger needle, disposable
PART A - Prostheses List by Category, Groups and Sponsor Page 637 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Bard Australia Pty LtdBA009 Simon Filter Femoral - 2110F, Simon Nitinol self expanding vena cava filter - 28mm Filter, 7Fr delivery
Filter Jugular - 2210J, Simon Filter "Simon Nitinol Filter"Anticubital - 2310A
Boston Scientific Pty LtdBS006 Greenfield Vena Cava Filter & Delivery Jugular System / Femoral System 12 Fr
System (single package) (Titanium or stainless steel)
Johnson & Johnson Medical Pty LtdJJ067 Trapease Vena Cava Filter and Nitinol filter Suitable for 18-30 mm vessels
Introduction kit
JJ423 OPTEASE retrievable vena cava filter OPTEASE is a laser cut nitinol vena cava Suitable for vessels up to 30mmfilter, used to treat patients at high risk of pulmonary embolisation
William A Cook Aust Pty LtdWC043 Inferior Vena Cava Filter Birds Nest Vena Cava Filter Filter Catheter French Size 11.0 Length
40, 75 cm Introducer Sheath Assembly French Size 12.0 Femoral/Jugular
WC044 PVA Embolisation particles Embolization & Occlusion Particle Size Ranges (microns) 50-100, 100-200, 200-300,300-500, 500-700, 700-1000, 1000-1500, 1500-2000, 2000-
Filtration Systems
Bard Australia Pty LtdBA010 Recovery Filter Femoral System Nitinol self expanding vena cava filter - 28mm Filter, 7Fr delivery
"Recovery Vena Cava Filter"
Grafts
William A Cook Aust Pty LtdWC153 Zenith AAA Endovascular Graft Composite One size onlyWC156 Zenith AAA Endovascular Graft ZFEN-1000 Fenestrated One size onlyWC209 Zenith Composite AAA Endovascular Proximal Composite Body 1 or 2 internal Stents, 24-36mm diameter,
73-129mm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 638 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC210 Zenith Fenestrated AAA Endovascular Distal Fenestrated Body Diameter 12-24mm, 1st length 28-62mm, 2nd length 76-121mm
WC211 Zenith Fenestrated AAA Endovascular Proximal Fenestrated Body 1 or 2 internal Stents, 24-36mm Diameter, 73-129mm Length
Grafts, Vascular, Synthetic
Advanced ORT Pty LtdOA004 Thoratec, Vectra Vascular Graft - Vectra, Biocompatible Polyurethane Length 40cm
Vascular Access Graft
OA005 Thoratec, Vectra Vascular Graft - Vectra, Biocompatible Polyurethane Length 50cmVascular Access graft
OA006 Thoratec, Vectra Vascular Graft - Vectra, Biocompatible Polyurethane Length 20cmVascular Access Graft
B Braun Australia Pty LtdBB017 Vascular Patch Vascular patch 12x9 to 3x4BB018 Vascular Uni - Graft Vascular graft 100cmBB019 Vascular Uni - Graft Vascular graft 60cmBB020 Vascular Uni - Graft Vascular graft 50cmBB021 Vascular Uni - Graft Vascular graft 40cmBB022 Vascular Uni - Graft Vascular graft 30cmBB023 Vascular Uni - Graft Vascular graft 20cmBB024 Vascular Uni - Graft Vascular graft 15cmBB025 Vascular Uni - Graft Vascular graft 10cmBB026 Vascular Uni - Graft - Tapered Vascular graft 12x6 to 24x12BB027 Vascular Uni - Graft - Bifurcated Vascular graft 12x7 to 12x12BB119 Vascugraft PTFE, Straight Standard Wall Dia 4 - 10mm, length 40 - 50cmBB120 Vascugraft Straight Standard Wall with Helix Support Dia 6 - 10mm, length 10 - 50cmBB121 Vascugraft Straight Standard Wall with Helix Support Dia 6 - 10mm, length 60 - 80cmBB122 Vascugraft Straight Standard Wall with Helix Support Dia 5 - 8mm, length 90cmBB123 Vascugraft PTFE - Straight Standard Wall Dia 5 - 10mm, length 80cm
PART A - Prostheses List by Category, Groups and Sponsor Page 639 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BB124 Vascugraft PTFE - Straight Standard Wall Dia 5 - 8mm, length 90 - 100cmBB125 Vascugraft Thin Wall Straight Dia 3 - 8mm, length 70 - 100cmBB126 Vascugraft Thin Wall Straight Dia 3 - 8mm, length10 - 40cmBB127 Vascugraft Thin Wall Straight Dia 3 - 8mm, length 10 - 40cmBB128 Vascugraft Straight Standard Wall with Helix Support Dia 6mm x length 100cmBB129 Vascugraft Straight Standard Wall with Helix Support Dia 5 - 8mm, length 80 - 90cmBB130 Vascugraft Straight Standard Wall with Helix Support Dia 4 - 6mm, length 50 - 70cmBB131 Vascugraft Thin Wall Tapered Dia 4 - 8mm, length 40 - 90cmBB132 Vascugraft Thin Wall Centre Helix Dia 6mm, length 45cmBB133 Vascugraft Thin Wall Centre Helix Dia 5 - 6mm, length 45 - 50cmBB134 Vascugraft Thin Wall Centre Helix Dia 4 - 8mm, length 70 - 80cmBB136 Vascugraft Standard Tapered Dia 4 - 8mm, length 70 - 90cmBB137 Vascugraft Standard with Centred Helix Dia 4 - 8mm, length 70 - 90cmBB138 Vascugraft Standard with Short Taper Dia 4 - 8mm, length 30 - 70cmBB139 Vascugraft Standard with Short Taper Dia 4 - 8mm, length 80cmBB141 Vascugraft Easy Glide - Standard Wall Straight Dia 6mm, length 70 - 80cmBB142 Vascugraft Easy Glide - Standard Wall Straight Dia 6mm, length 40 - 60cmBB143 Vascugraft Easy Glide - Standard Wall with Helix Dia 6 - 8mm, length 40 - 70cm
Short Taper
BB144 Vascugraft Easy Glide - Thin Wall Straight Dia 6 - 8mm, length 40 - 70cmBB145 Vascugraft Thin Wall Centred Helix Tapered Dia 4 - 7mm, length 70cmBB146 Vascugraft Easy Glide - Thin Wall Straight with Helix Dia 6 - 8mm, length 40 - 80cm
Support
BB155 Vascugraft Standard Tapered Dia 4 - 7mm, length 30 - 70cmBB156 Vascugraft Standard Wall with Tapered Centre Helix Dia 4 - 8mm, length 40 - 45cmBB157 Vascugraft Standard Wall Stepped Taper Dia 4 - 8mm, length 40 - 45cm
Bard Australia Pty LtdBA019 Impra PTFE Vascular Grafts ePTFE graft - radially supported, thin 4mm - 8mm diameter
wall, 10 - 50cm long
PART A - Prostheses List by Category, Groups and Sponsor Page 640 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA020 Impra PTFE Vascular Grafts ePTFE graft - thin wall, 10 - 50cm long 3mm - 10mm diameterBA021 Impra PTFE Vascular Grafts ePTFE graft - radially supported, thin 4 - 8mm diameter
wall, greater than 50cm long
BA022 Impra PTFE Vascular Grafts ePTFE graft - radially supported, regular 4 - 19mm diameterwall, 10-50cm long
BA023 Impra PTFE Vascular Grafts ePTFE graft - radially supported, regular 4 - 10mm diameterwall, greater than 50cm long
BA024 Impra PTFE Vascular Grafts ePTFE graft - thin wall, greater than 3 - 10 diameter50cm long
BA025 Impra PTFE Vascular Grafts ePTFE graft - regular wall, 10-50cm long 3 - 19mm diameterBA026 Impra PTFE Vascular Grafts ePTFE graft - regular wall, greater than 3 - 10mm diameter
50cm long
BA027 Impra PTFE Vascular Grafts Distaflo ePTFE graft with preformed cuff 6-10mm diameter, 40 - 80cm lengthBA028 Impra PTFE Vascular Grafts Distaflo ePTFE graft with preformed cuff 6-10mm diameter, 40 - 80cm length
and flex support
BA029 Impra PTFE Vascular Grafts Venaflo ePTFE graft with preformed cuff 4mm - 8mm diameter, 10cm - 50cm BA030 Impra PTFE Vascular Grafts Venaflo ePTFE graft with preformed cuff 4mm - 8mm diameter, 10cm - 50cm
and flex support
Boston Scientific Pty LtdBS057 Exxcel Soft PTFE Vascular Graft PTFE, thin wall and standard wall ringed Standard Wall Vascular Grafts - Straight
(supported) and unringed (unsupported). diameter 4 - 8mm, length 20 - 80cm; Standard Wall Vascular Grafts types - Straight externally supported diameter 6 - straight, straight externally supported, 8mm, length 50 - 80cm; Straight centrallystraight centrally supported, short taper, supported diameter 6mm, length 40 - short taper centrally supported, step, step 50cm; Short taper centrally supported centrally supported. Thin Wall Vascular diameter 4 - 7mm, length 40 - 45cm; Grafts types - straight, straight externally Step diameter 4 - 7mm, length 45cm;
Step centrally supported diameter 4 - 7mm, length 45cm; Thin wall vascular grafts - Straight diameter 4 - 10mm, length 10 - 90cm; Straight externally supported diameter 5 - 10mm, length 40 -
Edwards Lifesciences Pty LtdEL034 Lifepath AAA Bifurcated Endovascular Elgiloy (proprietory metal alloy) & woven 21, 23, 25, 27, 29mm
polyester
EL035 Lifepath AAA Straight Endovascular Elgiloy (proprietory metal alloy) & woven 19mm, 6-9cm; 21mm, 6-9cm; 23mm, 6- polyester 9cm; 25mm, 6-9cm
PART A - Prostheses List by Category, Groups and Sponsor Page 641 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EL036 Lifepath AAA Iliac Graft Elgiloy (proprietory metal alloy) & woven 10mm x 9cm; 10mm x 11cm; 12mm x polyester 9cm; 12mm x 11cm; 14mm x 9cm;
14mm x 11cm; 16mm x 9cm; 16mm x 11cm; 18mmx9cm; 18mmx11cm
EL037 Lifepath AAA Aortic Cuff Graft Elgiloy (proprietory metal alloy) & woven 21, 23, 25, 27, 29, 31mm x 4cm polyester
EL038 Lifepath AAA Extension Graft Elgiloy (proprietory metal alloy) & woven 10, 12, 14, 16, 18mm x 4cm polyester
Imthage Pty LtdIM001 Venous Valve Ring Dacron/silicone variable diameter ring 52mmx15mmx0.09 mm
Terumo Corporation AustraliaTU006 Twillweave Graft Straight, Polyester, Woven, Unsealed 6-24mm x 50-60cmTU007 Twillweave Graft Bifurcate, Polyester, Woven, Unsealed 12mm x 6mm x 45cm to 24mm x 12mm
x 45cm
W L Gore & AssociatesGT002 Gore-Tex Axillo-Bifemoral Vascular Graft ePTFE 70 - 40cm Length 8 x 8mm DiameterGT003 Gore-Tex Axillo-Bifemoral Vascular Graft ePTFE 70 - 40cm Length 8 x 8mm Diameter
with Removable Rings
GT006 Gore-Tex Bifurcated Graft ePTFE 12x6mm to 24x12mm 40-50cm longGT007 Gore-Tex Vascular Ring Graft Ringed Grafts Fixed THIN WALL 6-10mm Diameter x 30-70cm Lengths -
STRETCH (ePTFE) Ringed Section 20-50cm Lengths
GT008 Gore-Tex Vascular Ring Graft Ringed Grafts REMOVABLE THIN 6-8mm Diameter x 80cm Length - RingedWALL STRETCH (ePTFE) Section 70cm Length
GT009 Gore-Tex Vascular Grafts Vascular Grafts - Aorto -Pulmonary & 3.5-5mm Diameter x 15-20cm LengthSystemic-Pulmonary Shunts (ePTFE)
GT010 Gore-Tex Vascular Graft THIN Wall Grafts TAPERED (ePTFE) 4.5-6.5 & 6-8mm Diameter x 80-90cm Lengths
GT020 Viabahn/Hemobahn Endoprosthesis Endoluminal Graft System Viabahn 2.5mm - 8mm Diameter, 5cm Length; Hemobahn 6 - 13mm Diameter, 5cm Length
GT021 Viabahn/Hemobahn Endoprosthesis Endoluminal Graft System Viabahn 2.5mm - 8mm Diameter, 10cm Length; Hemobahn 6 - 13mm Diameter, 10cm Length
GT022 Viabahn/Hemobahn Endoprosthesis Endoluminal Graft System Viabahn 2.5mm - 8mm Diameter, 15cm Length; Hemobahn 6 - 11mm Diameter, 15cm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 642 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT023 Excluder Endovascular Prostheses Thoracic Stent Graft Nitinol & ePTFE 26-40mm Diameter x 15-20cm LengthsGT131 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 70cmGT132 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 4 - 8mm, Length 10cmGT133 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 20 - 30cmGT134 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 50cmGT135 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 60cmGT136 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 80cmGT137 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 90 - 100cmGT138 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 4 - 8mm, Length 10cmGT139 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 20 - 30cmGT140 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 40cmGT141 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 50cmGT142 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 60cmGT143 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 70cmGT144 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 4 - 10mm, Length 80cmGT145 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 4 - 10mm, Length 90 - 100cmGT146 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 12 - 24mm, Length 20cmGT147 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 12 - 24mm, Length 30cmGT148 Gore-tex Vascular Grafts Standard Wall Grafts Stretch (ePTFE) Diameter 12 - 24mm, Length 40cmGT149 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 10cmGT150 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 20cmGT151 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 30cmGT152 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 40cmGT153 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 50cmGT154 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 60cmGT155 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 70cmGT156 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 4 - 10mm, Length 80cmGT157 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 4 - 10mm, Length 90 - 100cm
PART A - Prostheses List by Category, Groups and Sponsor Page 643 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT158 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 4 - 10mm, Length 10cmGT159 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 20cmGT160 Gore-tex Vascular Grafts Thin Wall Grafts Stretch (ePTFE) Diameter 6 - 10mm, Length 30cmGT161 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 6 - 10mm, Length 40cmGT162 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 50cmGT163 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 3 - 10mm, Length 60cmGT164 Gore-Tex Vascular Grafts Thin wall grafts (ePTFE) Dia 3 - 10mm, length 70cmGT165 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 80cmGT166 Gore-tex Vascular Grafts Thin Wall Grafts (ePTFE) Diameter 4 - 10mm, Length 90 - 100cmGT167 Gore-tex Vascular Grafts Vascular Grafts - Aorto-Pulmonary & Diameter 3.5 - 5mm, Length 5cm
Systemic-Pulmonary Shunts (ePTFE) Stretch & Non Stretch
GT168 Gore-tex Vascular Grafts Vascular Grafts - Aorto-Pulmonary & Diameter 3.5 - 5mm, Length 10cmSystemic-Pulmonary Shunts (ePTFE) Stretch & Non Stretch
GT171 Gore-tex Vascular Grafts Standard Wall Grafts Stretch Tapered Diameter 4-6mm & 4-7 mm, Length 45 - 48cm
GT172 Gore-tex Vascular Grafts Standard Wall Grafts Stretch Tapered Diameter 4-7 mm, Length 70cmGT173 Gore-tex Vascular Grafts Standard Wall Grafts Tapered (ePTFE) Diameter 4-7 mm & 6-8mm, Length 40 -
60cm
GT174 Gore-tex Vascular Grafts Ringed Grafts Removable Standard 4-7 mm x 45cm - Rings 10cm LengthWall/Stretch Wall Tapered (ePTFE)
GT175 Gore-tex Vascular Grafts Ringed Grafts Removable Standard Wall 4-7 mm x 70cm - Rings 30cm LengthTapered (ePTFE)
GT176 Gore-tex Vascular Ring Graft Ringed Grafts Fixed Standard & Thin Diameter 6 - 10mm x 30 - 70cm Length Wall (ePTFE) ,Ringed Section 20 - 50cm Lengths
GT177 Gore-tex Vascular Ring Graft Ringed Grafts Fixed Thin Wall & Ringed Diameter 6 - 10mm x 30 - 70cm Length, Standard Wall (ePTFE) Ringed Section 20 - 50cm Lengths
GT178 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6 - 8mm x 60 - 70cm Length, Ringed Section 30cm Length
GT179 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 5 - 6mm x 70cm Length, Ringed Section 60cm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 644 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT180 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 5 - 6mm x 80cm Length, Ringed Section 60cm Length
GT181 Gore-tex Vascular Ring Graft Ringed Grafts Fixed Standard Wall & Diameter 6 - 10mm x 30 - 70cm Lengths,Stretch Standard Wall (ePTFE) Ringed Section 20 - 50cm Lengths
GT182 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6mm, Lengths 80 - 90 cm, Ringed Section 60cm Length
GT183 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 8mm, Lengths 80 - 90 cm, Ringed Section 70cm Length
GT184 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6 - 8mm x 70cm Length, Stretch (ePTFE) Ringed Section 30cm Length
GT185 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6mm x 80cm Length, Ringed Stretch (ePTFE) Section 30cm Length
GT186 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6mm x 70cm Length, Ringed Stretch (ePTFE) Section 60cm Length
GT187 Gore-tex Vascular Ring Graft Ringed Grafts Removable Thin Wall Diameter 6 - 8mm x 70cm Length, Stretch (ePTFE) Ringed Section 60 - 70cm Length
GT192 Gore-tex Vascular Grafts Standard Wall Grafts Tapered (ePTFE) 4.5-6.5mm & 6-8mm Diameter x 70-90cm Lengths
GT193 Gore-tex Vascular Grafts Standard Wall Grafts (ePTFE) 6-10mm Diameter x 40cm LengthGT194 Gore-tex Vascular Graft Standard wall grafts, tapered (ePTFE) Diameter 4.5-7mm, lengths 40-50cmGT195 Gore-tex Vascular Graft Standard wall grafts (ePTFE) Diameter 6mm x 20cm lengthGT196 Gore-tex Vascular Ring Graft Ringed grafts fixed standard/thin wall Diameter 4-6mm x 10-15cm, ringed
(ePTFE) section 2.5-5cm lengths
GT197 Gore-tex Vascular Ring Graft Ringed grafts fixed standard/thin wall Diameter 8mm x 30cm, ringed section (ePTFE) 20cm length
GT198 Gore-tex Vascular Ring Graft Ringed grafts fixed standard/thin wall Diameter 5-8mm x 60-70cm, ringed (ePTFE) section 20-30cm lengths
GT199 Gore-tex Vascular Ring Graft Ringed grafts fixed thin wall stretch Diameter 6-8mm x 60-80cm, ringed section 20-30cm lengths
GT200 Gore-tex Vascular Graft Standard wall grafts stretch (ePTFE) Diameter 6-12mm x 20cm lengthGT211 Gore-Tex Intering Vascular Graft ePTFE integrated rings in the wall of a Dia 6-8mm, 40cm radial supported length
stretch thin walled graft x 40cm length
GT212 Gore-Tex Intering Vascular Graft ePTFE integrated rings in the wall of a Dia 6-8mm, 60cm radial supported lengthstretch thin walled graft x 60cm length
PART A - Prostheses List by Category, Groups and Sponsor Page 645 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT213 Gore-Tex Intering Vascular Graft ePTFE integrated rings in the wall of a Dia 6-8mm, 80cm radial supported lengthstretch thin walled graft x 80cm length
GT214 Gore-Tex Intering Vascular Graft Internally radially supported vascular 4-6 tapered diameter 38cm radial support graft (ePTFE) length 45cm length; 4-7 tapered diameter
38cm radial support length 45cm length; 6mm diameter 40cm radial support length 40cm length
GT215 Gore-Tex Intering Vascular Graft ePTFE integrated rings in the wall of a Dia 6mm, 5cm radial supported length x stretch and non-stretch walled graft 45cm length - non-stretch
GT216 Gore-tex Axillobifemoral Vascular Graft Stretch vascular graft with removable Diameter 8mmrings (ePTFE)
GT218 Gortex Propaten Vascular Graft Stretch Thin Wall Graft (ePTFE) 6mm diameter 30cm Removable Ring - 70cm length
GT219 Gortex Propaten Vascular Graft Stretch Thin Wall Graft (ePTFE) 6mm diameter 60cm Removable Ring - 70cm length
GT220 Gortex Propaten Vascular Graft Stretch Thin Wall Graft (ePTFE) 6-8mm diameter 60-70 Removable Ring - 80cm length
GT221 Gortex Propaten Vascular Graft Stretch Thin Wall Graft (ePTFE) 6-8mm diameter Non-Ringed 40cm GT222 Gortex Propaten Vascular Graft Stretch Thin Wall Graft (ePTFE) 6-8mm diameter Non-Ringed 80cm
William A Cook Aust Pty LtdWC133 Zenith Flex AAA Endovascular Graft - Stainless steel Dia 22 - 32mm, length 82 - 140mm
body only
WC134 Zenith Flex AAA Endovascular Graft Three components consisting of a body Body - Dia 22 - 32mm, length 82 - and 2 legs (ipsilateral iliac leg and 140mm; Iliac leg extensions Dia 8 -
24mm, length 37 - 139mm
WC155 ZenithTXA Endovascular Graft Thoracic Acute Dia 22mm Length 115mm; Dia 26mm Length 134mm;Dia 30mm Length 120mm; Dia 34mm Length 127mm; Dia 38mm Length 127mm; Dia 42mm Length 135mm
WC157 Zenith TAA Endovascular Graft Thoracic - TX2 One size onlyWC159 Zenith TAA Endovascular Graft Thoracic - TX1 One size only
PART A - Prostheses List by Category, Groups and Sponsor Page 646 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
WC160 Zenith TAA Endovascular Graft Thoracic Proximal Extension Dia 22 Length 77; Dia 24 Length 77;Dia 26 Length 77; Dia 28 Length 80; Dia 30 Length 80; Dia 32 Length 80; Dia 34 Length 77; Dia 36 Length 77; Dia 38 Length 77; Dia 40 Length 81Diameter 42 Length 81
WC186 ZenithThoracic Endovascular Graft Thoracic Proximal Graft 22mm to 42mm diameter; 115mm to 216mm length
WC187 Zenith Thoracic Endovascular Graft Thoracic Distal Graft 26mm to 42mm diameter; 127mm to 207mm length
WC188 Zenith Thoracic Endovascular Graft Thoracic Body Extension 22mm to 42mm diameter; 77mm to 81mm length
Haemostatic Materials, Animal Origin
St. Jude Medical Australia Pty LtdSJ002 Angio-Seal Haemostatic Puncture Closure Model 610092, Haemostatic Materials, 6 French Temporary Approval
Device Animal Origin
SJ003 Angio-Seal Haemostatic Puncture Closure Model 610098, Haemostatic Materials, 8 French Temporary Approval Device Animal Origin
SJ014 Angio-Seal Vascular Closure Device - Angio-Seal Haemostatic Puncture Closure 6F Temporary approvalSTS Platform and STS Plus Device, Models 6F-STS Platform and 6F
STS Plus
SJ015 Angio-Seal Vascular Closure Device - Angio-Seal Haemostatic Puncture Closure 8F Temporary approvalSTS Platform and STS Plus Device, Models 8F-STS Platform and 8F
STS Plus
Injection/Infusion Ports, Implantable
B Braun Australia Pty LtdBB170 Celsite Access Port for pain relief Composition - polysulphone. Kit includes Diameter of septum:11.7mm. Height:
tunnelling rod, filter, connectors, 11.5mm. Dimension: 25.8 x 37.8mmneedles, syringe, tuohy needle
PART A - Prostheses List by Category, Groups and Sponsor Page 647 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Boston Scientific Pty LtdBS065 Vaxcel Implantable Vascular Access Polyurethane Catheter Material with dual 16 French catheter tapering to a 14
lumens and a staggered distal tip; French, lengths 19, 23, 28cmpolyester cuff which provides catheter security and tissue growth; clear extension tubes with clamps
William A Cook Aust Pty LtdWC093 Cook Implantable Injection/Infusion Ports Standard Single Chamber Polysulfone 5fr, 6.5fr, 7.5fr, 9.5fr Pre-attached or
with Standard Introducer Set, Petite Detached CatheterSingle Chamber Polysulfone with Standard Introducer Set, Petite Single Chamber Polysulfone with Micropuncture Introducer Set
WC094 Cook Implantable Injection/Infusion Ports Mini Single Chamber Titanium with 5.0fr, 6.5fr, 7.5fr, 8.5fr Pre-attached or Standard Introducer Set; Petite Single Detached CatheterChamber Titanium with Standard Introducer Set; Petite Single Chamber Titanium with Micropuncture Introducer Set; Standard Single Chamber Titanium with Standard Introducer Set
WC115 Cook Implantable Injection/Infusion Port Mini Single Chamber Titanium with 5.2fr Detached CatheterMicropuncture Introducer Set
WC164 Cook Implantable Injection/Infusion Ports Dual Chamber Titanium Port 7.5 fr, 11.5 fr Pre-Attached or Detached Catheter with Standard or Micropuncture Introducer
Occluders
William A Cook Aust Pty LtdWC103 Zenith Iliac Plug Zenith AAA Endovascular Graft Diameter 14, 16, 18, 20, 22, 24mm
Occluders, Vascular
Endotherapeutics Pty LtdET027 Duct-Occlud Spiral Coil Stainless Steel Spiral Coil Standard - 4 x 3,4, 5mm; Standard - 5 x
6,7 mm; Standard - 6 x 7 mm; Reinforced - 5 x 7mm; Reinforced - 6 x
PART A - Prostheses List by Category, Groups and Sponsor Page 648 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Johnson & Johnson Medical Pty LtdJJ223 TruFill DCS Detachable coil Platinum detachable coil of complex and Size .012" outer diameter. Complex
helical shapes. Embolic coil and delivery shape - 2 -12mm (dia), 2 - 30cm lengths;tube. helical shape - 2 - 30mm (dia), lengths 2
JJ224 TruFill Pushable coil Platinum pushable coil of 1. Straight, 2. Size .014" outer diameter. Size 2 - 10mmC, 3. Flat spiral and 4. Complex shapes. and length 2 - 100mmEmbolic coil and delivery tube.
Patches, Myocardial
Boston Scientific Pty LtdBS019 Cardiovascular Fabrics and Felts LARS Polyester Mesh, Cooley Knitted LARS Polyester Mesh 15cm x15cm,
Polyester Fabric, Weavenit Polyester Cooley Knitted Polyester Fabric 10cm x Fabric, Meadox Stretch Polyester Fabric, 10cm, Weavenit Polyester Fabric 10cm xWoven Minicrimp Polyester Fabric, 10cm, Meadox Stretch Polyester Fabric, Knitted Minicrimp Polyester Fabric, Woven Minicrimp Polyester Fabric 5cm xCooley Low Porosity Polyester Fabric, 10cm, Knitted Minicrimp Polyester Surgical Supported Polyester Felt Fabric 5cm x 10cm, Cooley Low (unsupported), Cooley Double Velour Porosity Polyester Fabric 10cmx10cm, Polyester Fabric, Cooley Single Velour Surgical Supported Polyester Felt Polyester Fabric, Trelex Natural Mesh (unsupported), Cooley Double Velour (Material Composition: Polypropylene) Polyester Fabric 10cm x 10cm, 15cm x
15cm Cooley Single Velour Polyester Fabric, Trelex Natural Mesh 2.5-25cm x
Procedure Trays, Surgical
Kendall Australasia Pty Ltd T/A Tyco Healthcare Pty LtdKA014 Mahurkar Maxid Catheters Catheters constructed of radiopaque Size, 38, 43, 48, 53cm
polyurethans, high kink resistant. The arterial lumen is shorter than the venous lumen at the catheter's distal end in order to reduce recirculation during
PART A - Prostheses List by Category, Groups and Sponsor Page 649 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prostheses, Blood Vessel, Artificial
Atrium Australia-Pacific Rim Pty LtdAC001 Atrium PTFE Vascular Graft Radially Supported (Ringed) PTFE 4mm x 10cm - 10mm x 100cm
Standard Wall
AC003 Atrium PTFE Vascular Graft Tapered PTFE Standard Wall 4-6mm x 30cm - 6-8mm x 90cmAC004 Atrium PTFE Vascular Graft Vascular Access Graft PTFE Standard 4mm x 10cm - 10mm x 100cmAC012 Atrium PTFE Vascular Graft Radially Supported (Ringed) PTFE Thin 4mm x 10cm - 10mm x 100cmAC013 Atrium PTFE Vascular Graft Straight PTFE Thin Wall 6mm x 10cm - 10mm x 90cmAC014 Atrium PTFE Vascular Graft Tapered PTFE Thin Wall 4-6mm x 30cm - 6-8mm x 90cmAC015 Atrium PTFE Vascular Graft Vascular Access Graft PTFE Thin Wall 4mm x 10cm - 10mm x 100cmAC016 Atrium Ultramax PET Grafts Bifurcate Polyster Graft 12mm x 24mm - 6mm x 12mm x 40cmAC017 Atrium Ultramax PET Grafts Axillo-bifemoral Polyster Graft 8mm - 10mm 100 x 60cmAC018 Atrium Ultramax PET Grafts Straight Polyster Graft 6mm x 15cm - 24mm x 30cmAC019 Atrium Ultramax PET Grafts Straight Polyster Graft 6mm x 40cm - 8mm x 100cmAC020 Atrium Hybrid PTFE Vascular Graft Vascular Access Graft PTFE Thin Wall 6mm x 10cm - 10mm x 100cm
(Ringed)
AC021 Atrium Hybrid PTFE Vascular Graft Radially Supported PTFE Thin Wall 4mm x 100cm - 10mm x 100cm; 16mm - 24mm x 30cm length (Straight); 12mm - 24mm x 6mm - 12mm Length - 40cm (Bifurcated)
AC023 Advant PTFE V12 Stent Graft System Balloon Expandable PTFE Encapsulated 16-59mm length, 5-9mm diameterStainless Steel Peripheral Vascular Stent
AC025 Atrium Ultramax Patches Knitted Double Velour Vascular Patch. Size range 8mm x 75mm to 50mm x Composition is polyester impregnated with absorbable gelatin
Bard Australia Pty LtdBA011 Grafts Vascular Polyester soft-woven graft - bifurcated 13mm - 25mm diameter aortic diameter,
6.5mm - 12.5 mm Iliac/Femoral diameter
BA012 Grafts Vascular Polyester knitted grafts - bifurcated 12mm - 24mm Aortic diameter, 6mm - 12mm Iliac/Femoral diameter
BA014 Grafts Vascular Axillo-bifemoral polyester graft 8mm-10mm diameter, 50cm- 100cm
PART A - Prostheses List by Category, Groups and Sponsor Page 650 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BA015 Grafts Vascular Intraluminal polyester graft 20mm - 29mm diameter, 4cm - 8cm BA017 Grafts Vascular Polyester grafts - straight 5mm - 25mm diameter, 50cm-75cm lengthBA018 Exs Bionit Vascular Grafts Polyester graft - EXS 8mm - 10mm diameter, 35cm lengthBA031 Grafts Vascular Polyester soft tissue patch 1mm thick 5cm x 10cmBA032 Grafts Vascular Polyester soft tissue patch 1mm thick 10cm x 15cmBA033 Grafts Vascular Polyester soft tissue patch 1mm thick 15cm x 20cmBA034 Grafts Vascular Polyester soft tissue patch 1mm thick 20cm x 30cmBA035 Grafts Vascular PTFE Felt 2mm thick 5cm x 10cmBA036 Grafts Vascular PTFE Felt 2mm thick 10cm x 15cmBA037 Grafts Vascular PTFE Felt 2mm thick 15cm x 20cmBA038 Grafts Vascular PTFE Felt 2mm thick 20cm x 30cmBA039 Grafts Vascular Polyester pledgets Rectangle, Oval, Circle, Square 2.9mm-
8mm x 6mm - 9.5mm
Boston Scientific Pty LtdBS004 Cooley Veri-Soft Vascular Grafts Straight (Unsealed, woven textile graft) Diameter: 6-38mm, Length: 15-100cmBS005 Cooley Double Velour Vascular Grafts Bifurcated (Unsealed, woven textile graft) Diameter: 12-24mm x 6-12mm, Length:
40cm, 100cm x 60cm (side)
Edwards Lifesciences Pty LtdEL001 PTFE Vascular Graft Expanded, reinforced 5-10mm x 10cm
Polytetrafluoroethylene. Straight, Regular
EL002 PTFE Vascular Graft Expanded, reinforced 5-10mm x 20cmPolytetrafluoroethylene. Straight, Regular
EL003 PTFE Vascular Graft Expanded, reinforced 5-10mm x 50cmPolytetrafluoroethylene. Straight, Regular
EL004 PTFE Vascular Graft Expanded, reinforced 5-10mm x 80cmPolytetrafluoroethylene. Straight, Regular
EL005 PTFE Vascular Graft Expanded, reinforced 5-10mm x 10cmPolytetrafluoroethylene. Straight, Regular Wall, Spiral Externally Supported
EL006 PTFE Vascular Graft Expanded, reinforced 5-10mm x 20cmPolytetrafluoroethylene. Straight, Regular Wall, Spiral Externally Supported
PART A - Prostheses List by Category, Groups and Sponsor Page 651 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EL007 PTFE Vascular Graft Expanded, reinforced 5-10mm x 50cmPolytetrafluoroethylene. Straight, Regular Wall, Spiral Externally Supported
EL008 PTFE Vascular Graft Expanded, reinforced 5-10mm x 80cmPolytetrafluoroethylene. Straight, Regular Wall, Spiral Externally Supported
EL009 PTFE Vascular Graft Expanded, reinforced 5-10mm x 10cmPolytetrafluoroethylene. Straight, Thin
EL010 PTFE Vascular Graft Expanded, reinforced 5-10mm x 20cmPolytetrafluoroethylene. Straight, Thin
EL011 PTFE Vascular Graft Expanded, reinforced 5-10mm x 50cmPolytetrafluoroethylene. Straight, Thin
EL012 PTFE Vascular Graft Expanded, reinforced 5-10mm x 80cmPolytetrafluoroethylene. Straight, Thin
EL013 PTFE Vascular Graft Expanded, reinforced 5-10mm x 10cmPolytetrafluoroethylene. Straight, Thin Wall, Spiral Externally Supported
EL014 PTFE Vascular Graft Expanded, reinforced 5-10mm x 20cmPolytetrafluoroethylene. Straight, Thin Wall, Spiral Externally Supported
EL015 PTFE Vascular Graft Expanded, reinforced 5-10mm x 50cmPolytetrafluoroethylene. Straight, Thin Wall, Spiral Externally Supported
EL016 PTFE Vascular Graft Expanded, reinforced 5-10mm x 80cmPolytetrafluoroethylene. Straight, Thin Wall, Spiral Externally Supported
EL017 PTFE Vascular Graft Expanded, reinforced 4-7mm x 50cmPolytetrafluoroethylene. Regular Wall,
EL018 PTFE Vascular Graft Expanded, reinforced 4-7mm x 50cmPolytetrafluoroethylene. Regular Wall,
EL019 PTFE Vascular Graft Expanded, reinforced 4-7mm x 50cmPolytetrafluoroethylene. Regular Wall,
EL020 PTFE Vascular Graft Expanded, reinforced 4-7mm x 40cmPolytetrafluoroethylene. Regular Wall,
EL021 PTFE Vascular Graft Expanded, reinforced 4-7mm x 50cmPolytetrafluoroethylene. Regular Wall,
PART A - Prostheses List by Category, Groups and Sponsor Page 652 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EL022 PTFE Vascular Graft Expanded, reinforced 4-7mm x 45cmPolytetrafluoroethylene. Regular Wall, Quick Taper - 5cm Center Spiral
EL023 PTFE Vascular Graft Expanded, reinforced 4-7mm x 45cmPolytetrafluoroethylene. Regular Wall,
EL024 PTFE Vascular Graft Expanded, reinforced 4-7mm x 70cmPolytetrafluoroethylene. Regular Wall,
EL025 PTFE Vascular Graft Expanded, reinforced 4-7mm x 70cmPolytetrafluoroethylene. Regular Wall,
EL026 PTFE Vascular Graft Expanded, reinforced 4-7mm x 70cmPolytetrafluoroethylene. Thin Wall,
EL027 PTFE Vascular Graft Expanded, reinforced 4-7mm x 70cmPolytetrafluoroethylene. Thin Wall,
Terumo Corporation AustraliaTU008 Fluoropassiv Graft Straight Graft - Thin Wall, Crimped. 6 to10mm x 30cm
Fluoropolymer/polyester, Knitted
TU009 Fluoropassiv Graft Straight Graft - Thin Wall, Crimped. 6 to10mm x 40 to 70cmFluoropolymer/polyester, Knitted
TU010 Fluoropassiv Graft Straight Graft, Thin Wall, Externally 6 to10mm x 30cmReinforced. Fluoropolymer/polyester,
TU011 Fluoropassiv Graft Straight Graft, Thin Wall, Externally 6 to10mm x 40 to 70cmReinforced. Fluoropolymer/polyester,
TU012 Fluoropassiv Patch Thin wall, Fluoropolymer/polyester, 0.6 x 7.5cm to 1.5 x 7.5cmTU013 Gelweave Graft Bifurcated, Polyester, Woven 12mmx 6mmx 45 cm to 24mmx12mm x TU014 Gelsoft Plus Graft Bifurcated, Polyester, Knitted 12mmx6mmx45cm to 24mmx12mmx45cmTU015 Gelsoft Plus Graft Polyester, Externally Reinforced, Knitted 6 to 10mm x 40cmTU016 Gelsoft Plus Graft Polyester, Externally Reinforced, Knitted 6 to 10mm x 75mTU017 Gelsoft Plus Graft Polyester, Externally Reinforced, Knitted 6 to 10mm x 100cmTU018 Gelsoft Plus Graft Axillofemoral, Polyester, Knitted 8x8mm/100x60cm; 8x7mm/90x40cm;
10x8mm/90x40cm
TU019 Gelsoft Plus Graft Femorofemoral, Polyester, Knitted 6mmx30cm to 8mmx40cmTU020 Gelsoft Plus Graft Straight, Polyester, Knitted 6 - 24mm x 12.5 - 30cmTU021 Gelsoft Plus Graft Straight, Polyester, Knitted 6-24mm x 50-60cm
PART A - Prostheses List by Category, Groups and Sponsor Page 653 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
TU022 Gelweave Graft Straight, Polyester, Woven 10-34mm x 20-30cmTU023 Gelweave Graft Straight, Polyester, Woven 10-34mm x 40-60cmTU024 Gelsoft Patch Polyester, Knitted 0.5 x 1.5cm to 10 x 1.5cmTU025 SEALPTFE Graft Thin Wall, Straight, Sealed, PTFE 6 to 8mm x 10 to 40cmTU026 SEALPTFE Graft Thin Wall, Straight, Sealed, PTFE 6 to 8mm x 50 to 80cmTU027 SEALPTFE Graft Standard Wall, Straight, Sealed, PTFE 6 to 8mm x 10 to 40cmTU028 SEALPTFE Graft Standard Wall, Straight, Sealed, PTFE 6 to 8mm x 50 to 70cmTU029 SEALPTFE Graft Standard Wall, Straight, Sealed, 6 to 10mm x 10 to 40cm
Externally Reinforcement, PTFE
TU030 SEALPTFE Graft Standard Wall, Straight, Sealed, 6 to 10mm x 50 to 70cmExternally Reinforcement, PTFE
TU031 SEALPTFE Graft Thin Wall, Straight, Sealed, Externally 6 to 10mm x 10 to 40cmReinforced, PTFE
TU032 SEALPTFE Graft Thin Wall, Straight, Sealed, Externally 6-10mm x 60-80cmReinforced, PTFE
TU033 SEALPTFE Graft Standard Wall, Tapered, Sealed, PTFE 4 to 7mm Taper x 40 to 50cmTU034 SEALPTFE Graft Standard Wall, Tapered, Sealed, Central 4 to 7mm Taper x 40 to 50cm
Reinforced, PTFE
TU035 SEALPTFE Graft Thin Wall, Straight, Sealed externally 6 - 10mm x 50cmReinforced, Vascular Artificial Arteries/Prostheses of PTFE, Sealed with Gelatin
TU036 Gelweave Valsalva Graft Woven vascular prosthesis, polyester, Diameter 26 - 32 mm, Overall length 18.6gelatin sealed - 19.2 cm
TU037 Gelweave Plexus Graft Multi Branched, for Aortic Arch 22 - 34 mm x 40 cmreconstruction, Polyester, Woven, gelatin sealed
TU038 Gelweave Graft Straight Thoracic Graft, with antiflo side 22-34 mm x 20-40 cmbranch, Polyester, woven, gelatin sealed
W L Gore & AssociatesGT011 Diastat Vascular Access Graft Dyalysis Grafts (ePTFE) 4-7mm & 6mm Diameter x 40-45cm GT169 Diastat Vascular Access Graft Dialysis Grafts - Standard & Stretch 6mm diameter x 45-50cm length Std &
Ringed (ePTFE) Stretch ringed dialysis graft/6mm diameter 5-10cm radial support length
PART A - Prostheses List by Category, Groups and Sponsor Page 654 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
GT170 Diastat Vascular Access Graft Dialysis Grafts (ePTFE) Diameter 4 - 7mm, Length 30 - 35cm
Prostheses, Blood Vessel, Biological
Bio Nova International Pty LtdBN001 Bio Nova Vascular Graft Flonova One size onlyBN002 Omniflow II Vascular Prosthesis - - 5 - 10 mm x 65 cmBN003 Omniflow II Vascular Prosthesis - - 5 - 10 mm x 55 cmBN004 Omniflow II Vascular Prosthesis - - 3 - 4 mm x 20 cmBN005 Omniflow II Vascular Prosthesis - Vascular Patch One size only
St. Jude Medical Australia Pty LtdSJ041 Intergard W Woven Straight 6mm x 30cm - 38mm x 30cmSJ042 Intergard W Woven Bifurcated 18mm x 9mm - 24mm x 12mmSJ043 Intergard W Woven Aortic Arch 24mm x 10mm x 8mm x 8mm x 50cm -
30mm x 10mm x 8mm x 8mm
SJ044 Intergard K Knitted Straight 6mm x 40cm - 24mm x 40cmSJ045 Intergard K Knitted Bifurcated 12mm x 6mm - 24mm x 12mmSJ046 Intergard K Knitted Radially Supported 6mm x 70cm - 8mm x 60cmSJ047 Intergard K Knitted Axillobifemoral Diameter (mm) Length (cm) 8 x 8
100/60; 10 x 10 100/60; 8 x 6 x 6 85/55; 8 x 8 85/55; 8 x 8 100/55
Prosthesis, Internal, Embolisation, Vascular
Boston Scientific Pty LtdBS080 Matrix SR Detachable Coils Matrix SR Detachable Coils are Length: 2cm to 30cm, Diameter: 2mm to
Platinum/Tungsten alloy coils covered 10mmwith an absorbable PGLA copolymer (90% Poly-glycolic acid/ 10% Poly-lactic
Medtel Australia Pty LtdME182 Amplatzer Vascular Plug Self expandable nitinol wire mesh Diameter 4mm - 16mm, Length 7 &
PART A - Prostheses List by Category, Groups and Sponsor Page 655 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Prosthesis, Internal, Stent
Abbott Australasia Pty LtdAY015 Xact Carotid Stent Nitinol Self-Expanding stent on rapid Diameter 7-10mm Length 20 + 30mm
exchange delivery system Straight; Diameter 8-6, 9-7, 10-8mm Length 20 + 30mm Tapered
Boston Scientific Pty LtdBS073 Neuroform Microdelivery Stent System Self Expanding Nitinol Stent, 3Fr delivery Diameter 2.5 - 4.5mm Length 10 - 20mm
catheter, peelable sheath, 2Fr stabilising catheter, rotating haemostasis valve (x2)
BS077 Sentinol Nitinol Vascular Stent System Implantable metallic stent and Uniflex Diameter: 5 to 10mm. Length: 20 to delivery system
Edwards Lifesciences Pty LtdEL040 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 15mm - 18mm, 0.035
included in delivery system: nylon balloon, stent and deployment system
EL041 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 19mm - 27mm, 0.035 included in delivery system: nylon balloon, stent and deployment system
EL042 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 28mm - 37mm, 0.035 included in delivery system: nylon balloon, stent and deployment system
EL043 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 38mm - 56mm, 0.035 included in delivery system: nylon balloon, stent and deployment system
EL044 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 15mm - 18mm, 0.018 included in delivery system: nylon balloon, stent and deployment system
EL045 Lifestent - Peripheral Stent Stent: Stainless Steel composition. Items Stent Length 19mm - 27mm, 0.018 included in delivery system: nylon balloon, stent and deployment system
EL046 Lifestent - Peripheral Stent Stent: Stainless Steel Composition. Items Stent Length 28mm - 37mm, 0.018 included in delivery system: nylon compatibleballoon, stent and deployment system
PART A - Prostheses List by Category, Groups and Sponsor Page 656 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
EL047 Lifestent - Peripheral Stent Stent: Stainless Steel Composition. Items Stent Length 38mm - 56mm, 0.018 included in delivery system: nylon balloon, stent and deployment system
EL048 Lifestent Peripheral Stent Stent: Nitinol composition with tanilum 6-8mm Diameter, length 20-90mmmarkers, Items included in the delivery system: Stent, deployment system
Medtronic Australasia Pty LtdMC328 Racer Renal Stent System Cobalt Alloy Diameter: 4-7mm; Lengths: 12 &18mm Temporary approval,
pending review of product group
Spring Infusor, Ambulatory
Tuta Healthcare Pty LtdTT001 Paragon Ambulatory Drug Infusion System The top of the Paragon infuser is made of Infuser - 100mL Administration Sets -
acetyl with stainless steel parts; the 0.50mL, 1mL, 2mL, 4mL, 10mL, 50mL, bottom is made of clear polycarbonate. 100mL, or 200mL/hrDiam: 10cm Height: 5.8cm. Administration Sets - made from PVC
TT003 Sidekick Ambulatory Disposable Delivery Spring infusor made from high impact Infuser - 50mL or 100mL, AdministrationSystem plastics. Administration Sets - made Sets - 50mL, 100mL or 200mL/hr
from PVC and acrylic components.
Stents
Device Technologies Australia Pty LtdDE213 IntraStent Expandable Stent Stainless Steel 2.8 x 10,16,26,36,56, 76 mm
Guidant Australia Pty LtdGU071 ACCULINK Peripheral Stent System Nickel-Titanium Intra-vascular stent 4-10mm diameter, 13-56mm length
PART A - Prostheses List by Category, Groups and Sponsor Page 657 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Stents, Vascular
Abbott Australasia Pty LtdAY007 Jostent SelfX Expanding Stent Nitinol Shaft length 15 - 180cm, stent length 32 -
92mm
AY008 Jostent Renal Premounted Balloon expandable Stent length 12 - 17mm, diameter 5 - 7 mmAY009 JOStent Peripheral Stent Stainless Steel 4 - 12 mm x 12 - 58m mmAY010 JOStent Peripheral Stent Graft Stainless Steel/PTFE 4 - 12 mm x 12 - 58m mmAY011 JOStent Standard Carotid Stent Surgical Steel 21mm - 46mmAY014 Jostent Wavemax Stainless Steel Dia 5 - 12mm, length 12 - 58mm
Bard Australia Pty LtdBA001 Memotherm Vascular Stents Memotherm nitinol self-expanding stent 4mm - 20mm diameters, 2cm - 12 cm BA002 Pura Vario Stent Saxx balloon expandable stainless steel 3mm - 14mm diameter, 13mm - 80mm BA003 Saxx Premounted Balloon Expandable Pura vario stainless steel stent 3mm - 16mm diameter, 13mm - 80mm BA004 Encapsulated Carbon Lined Stent Graft AV access PTFE covered nitinol self- 4mm - 10mm diameter, 3cm - 8cm
expanding stent
BA005 Encapsulated Carbon Lined Stent Graft Iliac / SFA PTFE covered nitinol self- 4mm - 10mm diameter, 3cm - 12cm expanding stent
BA006 Endologix Endoluminal Prostheses Power link endoliminal stent graft 25mm - 32mm Proximal diameter, 16 - 20mm Limb diameter, 130mm - 220mm
BA007 Endologix Endoluminal Prostheses Power link limb extension 16mm x 55mm, 16mm x 88mm, 20mm x 55mm
BA008 Endologix Endoluminal Prostheses Power link proximal cuff 25mm x 55mm, 28mm x 55mm, 28mm x 75mm (55mm covered)
Biotronik Australia Pty LtdBT034 PHILON Flexible coated stent, self expanding Dia 7-9mm, length 30-80mmBT035 PEIRON Flexible coated stent with delivery system Dia 5-8mm, length 18-38mm
Boston Scientific Pty LtdBS013 Symphony Nitinol Stent Self-expanding stents with radiopaque Diameter x Length: 6-14mm x 22-60mm
markers
PART A - Prostheses List by Category, Groups and Sponsor Page 658 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BS035 Expandable Endovascular Wallstent Wallstent - Easy Wallstent, Iliac Wallstent Stent Diameter x Stent Length: 6-16mm x (A self-expanding stent that has a 18-70mmcylindrical braided structure composed of 24 wires with core of either tantalum or
BS036 Schneider Endovascular Grafts: Straight A self expanding, flexible endoprosthesis, Size: 6-16mm, 30-90mmmade of medium porosity PET graft material with radiopaque tracer wire
BS056 Carotid Wall Stent Model SCH64371, SCH64377, Fully open diameter 6.0 - 10.0mm, Fully SCH64378, SCH64379, SCH64382, open length 22 - 37mmSCH64383, SCH64384, Elgiloy (cobalt chromium), flexible low profile, self
BS059 Express Vascular LD Stent; Express 316L stainless steel stent mounted on a Diameter 4mm - 10mm, Length 14mm - Vascular SD Stent balloon. The balloon shaft is 60mm
polyurethane with coextrusion balloon on a distal end where stent is crimped to.
BS060 Transhepatic Biliary Permalume Covered Elgiloy (cobalt chromium), permalume 8 x 60mm, 8 x 80mm, 10 x 40mm, 10 x Wallstent (silicone coating), self expanding, flexible, 60mm, 10 x 80mm
Model numbers: 4356, 4357, 4358, 4359
BS063 Wallstent RP; 7Fr Placehit Wallstent Wallstent TIPS endoprosthesis, wallstent Diameter 6mm - 24mm, Length 18mm - biliary endoprosthesis, wallstent iliac 90mmendoprosthesis, wallstent endoprosthesis tracheobronchial with unistep plus delivery sytem, 7Fr Placehit Wallstent. Stent composition - biomedical superalloy wire, braided in mesh, unistep delivery system composition - blue polyimid material, stainless steel
Device Technologies Australia Pty LtdDE212 Intracoil Stent Nickel titanium alloy 40 x 4,5,6,7,8 mm
Endotherapeutics Pty LtdET024 Optimed Tips Sinus Stent Sinus-wave nitinol stent 10-12mm x 50-90 mmET025 Optimed Iliac Sinus Stent Sinus-wave nitinol stent 4-12mm x 30-100mmET026 Optimed Femoral Sinus Stent Sinus-wave nitinol stent 4-12mm x 30-100mmET030 Aspire Covered Stent Expandible Nitinol Stent covered with Dia 6-14mm, Length 2.5-10cmET037 SX-Ella Endovascular Stent Uncovered, self-expanding nitinol stent Dia 6-16mm, length 22-77mm
PART A - Prostheses List by Category, Groups and Sponsor Page 659 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
Five Corners Pty LtdFC001 Endoluminal Stent Graft and Delivery Multiple sizes of stent graft on pre-loaded Dia 15-27mm, Length 87-189mm
catheter shaft for delivery and deployment, comprised of Pet & Nitinol
Guidant Australia Pty LtdGU058 Dynalink Peripheral Self Expanding Stent - Lengths 80cm and 120cm, Sizes range
System from 5mm x 28mm to 10mm x 56mm
Jacobs Medical Australia Pty LtdJM001 Angiodynamics Angiostent Balloon Platinum wire 5mm to 10mm
Expandable Stent System (Vistaflex)
Johnson & Johnson Medical Pty LtdJJ057 Palmaz Balloon Expandable Stent Stainless steel stent Diameter 4-12mm, length 20-30mmJJ058 Palmaz Balloon Expandable Stent Stainless steel stent Extra-largeJJ059 Palmaz Balloon Expandable Stent Corinthian stainless steel stent Diameter 4-10mm; Length 12 - 79 mmJJ063 Smart Peripheral Stent System Nitinol vascular stent 6 - 14 mmJJ064 Duo Via Main Endograft Leg and Delivery Nitinol abdominal aortic aneurysm device 13F, 16-28 mm
System leg extension
JJ065 Duo Via Bioseal and Delivery System Nitinol abdominal aortic aneurysm device 13F, 16-28 mmJJ068 SMART .018" Peripheral Stent System Nitinol carotid stent and delivery system 6 - 10 mmJJ069 Palmaz Corinthian IQ Peripheral Stent Stainless steel hypotube stent 12 - 80 mmJJ230 Palmaz Corinthian IQ Peripheral Stent and Laser cut from 316L stainless steel Corinthian IQ M3 (available in 15 and
Delivery System hypotube. Cells connected by omega 18mm stent diameteres) mounted on 5 - 7shaped hinges. Stent mounted on a rapid mm rapid exchange balloon.exchange balloon, a very low profile .014
JJ235 SMART Peripheral stent system Laser cut nitinol tube. Available in long Dia 6 - 8mm, length 120mmstents to treat large vessel lesions.
JJ236 SMART Peripheral stent system Laser cut nitinol tube. Added to the stent Dia 6 - 10mm, length 26, 40, 60, 80mm. ends are Tantalum Micromarkers for Delivery system 80 and 120 SDSenhanced radiopacity
JJ304 Palmaz Genesis Peripheral Stent and Stainless steel balloon expandable stent Diameter 4-8mm, length 12-39mmDelivery System on Slalom mounted on a slalom balloon
JJ305 Palmaz Genesis Peripheral Stent and Stainless steel balloon expandable stent Diameter 4-8mm, length 12-39mmDelivery System on Opta Pro mounted on an Opta Pro Balloon
JJ306 Palmaz Genesis Peripheral Stent Stainless steel peripheral stent Diameter 4-12mm, length 11-79mm
PART A - Prostheses List by Category, Groups and Sponsor Page 660 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
JJ419 SMART Control Peripheral Stent System SMART Control is a laser cut nitinol self Dia 6-10mm; Length 20, 40, 60, 80, expanding stent, used to treat peripheral vessel disease.
Medtel Australia Pty LtdME051 Antares Endovascular Stent Stents Length: 10 / 18 / 38 (mm)ME072 Antares Renal Twin Stent System Stainless steel stent on a rapid-exchange Stent Delivery System - 80cm & 135cm;
PTA catheter Stent lengths 11 & 17mm; Balloon diameters 4.5-7mm
Medtronic Australasia Pty LtdMC004 INX Neurovascular Stent Delivery Neurovascular over the wire stent 2.5 x 6mm - 4 x 18mm
delivery system. Stainless steel.
MC143 Medtronic Stents, Sterile Medtronic AneuRx Aortic / Illiac Stent - 20-28mm x 12-16mm x 13-16.5cmNitinol / Polyester:
MC145 Medtronic Aust Stents, Sterile Medtronic AneuRx Aortic or Iliac Cuff 12-16mm x 5.5/8.5/11.5mm, 20-28mm xStent - Nitinol / Polyester. 3.75mm
MC146 Medtronic Sterile Stents; Carotid Self Stainless Steel Carotid Stent - Nitinol, Bridge Assurant Stents - Diameter (6mm-Expanding Stent Delivery System; Bridge Stainless Steel Flexible Iliac Bridge Stents, 10mm), Length (20mm-60mm); Bridge SE-Self Expanding Stents, Bridge Stainless Steel Extra Support Renal Plus X3 Stents - Diameter (5mm-7mm), Assurant Stents, Bridge X3 Stents, Bridge Bridge Stent or S/Steel Bridge - Nitinol, Length (17mm); Bridge Stents - Diameter Stents, Aurora Stents; Exponent RX Self Stainless Steel Bridge Assurant Stents, (5mm-7mm), Length (9mm-16mm); Expanding Carotid Stent System Stainless Steel Bridge X3 Stents, Stainless Bridge SE Stents - Diameter (6mm-
Steel Bridge Stents, Aurora Stents - 10mm), Length (20mm-80mm); Aurora Nitinol; Exponent RX Self Expanding Stents - Diameter (6mm-10mm), Length Carotid Stent System - Nitinol (20mm - 80mm); Exponent RX Self
Expanding Caraotid Stent System - Diameter (6mm - 10mm), Length (20mm - 40mm)
MC147 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Bifurcated 22-32 x 12-16 x 145mm, 20-36 x 10-20 System. Nitinol / Polyester or Talent x 155-170mmEndoluminal stent-graft system Aorto Uni Iliac
MC148 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Bifurcated 18-36 x 8-18 x 140-170mm System. Nitinol / Polyester
MC150 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Bifurcated 16-50mm System. Nitinol / Polyester, FreeFlow / Open Web. Custom Sizing
PART A - Prostheses List by Category, Groups and Sponsor Page 661 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC152 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Straight 50-180mmAbdominal Aortic Custom System. Nitinol / Polyester, FreeFlow/Open Web. Custom Sizing
MC153 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Aorto- 16-50mmUnilliac Tapered Custom System. Nitinol / Polyester. Custom Sizing
MC155 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft 50-180mmDescending Thoracic Aortic Custom System. Nitinol / Polyester, FreeFlow / Open Web. Custom Sizing
MC157 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft Trombone 16-50mm Aortic Custom System. Nitinol / Polyester. Free Flo/Open Web. Custom
MC158 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 18 - 36mm x 28 - 32mm long (60mm)Nitinol / Polyester
MC159 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 26 - 46mm x 80 - 90mmNitinol / Polyester; Talent Endoluminal Stent Graft System FreeFlow, Open Web. Nitinol / Polyester
MC160 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 8-26mm x 75-200mmNitinol / Polyester. Open Web
MC164 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 11-12cmNitinol / Polyester. Open-web.
MC165 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 13-14cmNitinol / Polyester. Open-web.
MC166 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 5-6cm Nitinol / Polyester. One bare spring.
MC167 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 7-8cmNitinol / Polyester. One bare spring.
MC168 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 9-10cmNitinol / Polyester. One bare spring.
MC169 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 11-12cmNitinol / Polyester. One bare spring.
MC170 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 5-6cmNitinol / Polyester. Two bare spring.
PART A - Prostheses List by Category, Groups and Sponsor Page 662 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
MC171 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 7-8cmNitinol / Polyester. Two bare spring.
MC172 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 9-10cmNitinol / Polyester. Two bare spring.
MC173 Medtronic Aust Stents, Sterile Talent Endoluminal Stent Graft System 11-12cmNitinol / Polyester. Two bare spring.
MC199 Talent Occluder System Nitinol stents attached to polyester graft Custom Sizes ranging from 5 - 20mm x sealed both ends 25 - 50mm
MC203 Talent Occluder System Nitinol stents attached to polyester graft Standard Sizes, 8 - 24mm x 31 - 35mmsealed both ends
MC205 Cerebrence Over-the-Wire Neurovascular Stainless Steel 2.5-4mm x 6-25mm Stent System
MC206 Medtronic Aust Stents Sterile Talent thoracic stent graft system, 22-46mm x 22-46mm x 130mmFreeFlow / Open Web, bare spring,
Pacing Importers Pty LtdPI004 Stentself Stent Phynox construction, adapted sizes & Dia 5 - 9mm Length: 20 - 100mm
diameters
Terumo Corporation AustraliaTU002 Anaconda Endovascular Graft System Bifurcated Aortic System, 18 - 32mmTU003 Anaconda Endovascular Graft System Aortic Extension Cuff, Polyester/Nitinol 18 - 32mmTU004 Anaconda Endovascular Graft System Iliac Extension Cuff, Polyester/Nitinol 8 - 16mmTU005 Anaconda Endovascular Graft System Iliac Leg, Polyester/Nitinol 8 - 16mm
W L Gore & AssociatesGT024 Excluder Endovascular Prostheses Abdominal Stent Graft Nitinol & ePTFE - 23-28.5mm Diameter, 14-18cm Length
Trunk - Ipsilateral Leg
GT029 Gore Tips Endoprosthesis ePTFE 8-12mm Diameter 4-8cm Graft-Lined Length 2cm Unlined Length
GT188 Excluder Endovascular Prostheses Abdominal Stent Graft Nitinol & ePTFE - Diameter 12 - 14.5mm x 10 x 14cm Contralateral Leg
GT189 Excluder Endovascular Prostheses Abdominal Stent Graft Nitinol & ePTFE - Diameter 23 - 28.5mm, Length 3.3cm Aortic Extender
GT190 Excluder Endovascular Prostheses Abdominal Stent Graft Nitinol & ePTFE - Diameter 10 - 14.5mm, Length 7cm Iliac Extender
GT191 Excluder Endovascular Prostheses Thoracic Stent Graft Nitinol & ePTFE Diameter 26-40mm x 10cm Length
PART A - Prostheses List by Category, Groups and Sponsor Page 663 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
William A Cook Aust Pty LtdWC041 Zenith AAA Endovascular Graft - Custom AAA Bifurcate Graft Neck 20-32mm Length 74-276mm
Craft
WC042 Zenith AAA Endovascular Graft - Custom AAA Aorto Uni Iliac (AUI) Graft Neck 20-32mm Length 74-276mm Craft
WC045 Cook H & L-B - Endostent Converter Diameter 20 thru 36 Length 80-85WC047 Cook H & L-B - Endostent Leg Extensions Diameter 18 thru 24 Length 55WC048 Cook H & L-B - Endostent Body Extensions Diameter 22 thru 36WC049 Cook H & L-B - Endostent - Tri-Fab Body Extension Diameter 22-32 mm Length 112-239mmWC051 Cook H & L-B - Endostent - Tri-Fab Leg Extension Diameter 10-12 Length 36-71WC052 Zenith AAA Endovascular Graft - Tri-fab AAA Tri-fab Graft Neck 22-32mm Length 112-239mmWC055 Peripheral Vascular Stent (ZA Stent); Vascular Stent Introducer Catheter Length 60 - 80 cm,
Zilver Stent Diameter 6 - 10 mm, Length 1 - 8cm
WC168 Zilver Stent Vascular Design Zilver 5 & 6 5fr and 6fr - 80cm and 120cm , 5mm to 12mm diameter, 2cm to 8cm length
WC175 Cook Z Stent Gianturco Vena Caval and Venous Design Double Stent - 20, 30, 40mm Diameters, 50mm Length
WC176 Cook Z Stent Gianturco Vena Caval and Venous Design Triple Stent - 20, 30, 40mm Diameters, 75mm Length
WC189 Cook Z Stent Gianturco Vena Caval and Venous Design Single Stent - 15, 20, 30mm diameters; 25mm length
Stents, Vascular, Coronary
Biotronik Australia Pty LtdBT033 PHAINON Flexible coated stent Dia5-8mm, length 11-56mm
Suture Units, Automatic
Abbott Australasia Pty LtdAY016 Perclose Arterial Support and Closure Suture to close femoral artery puncture Closer S - 6-8Fr, Perclose AT - 6-8Fr,
sites following diagnostic and Prostar 8Fr, Prostar 10Frinterventional procedures
PART A - Prostheses List by Category, Groups and Sponsor Page 664 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
AY017 Starclose 6 Fr Exchange Sheath, Dilator, 6 FrGuidewire, implantable nitinol clip pre-mounted on a Clip Applier
Tissue Reconstructive Materials, Solid
W L Gore & AssociatesGT012 Soft Tissue Patch ePTFE 1mm Thickness 5 x 10cmGT013 Soft Tissue Patch ePTFE 1mm Thickness 10 x 15cmGT014 Soft Tissue Patch ePTFE 1mm Thickness 15 x 20cmGT015 Soft Tissue Patch ePTFE 1mm Thickness 20 x 30cmGT016 Soft Tissue Patch ePTFE 2mm Thickness 5 x 10cmGT017 Soft Tissue Patch ePTFE 2mm Thickness 10 x 15cmGT018 Soft Tissue Patch ePTFE 2mm Thickness 15 x 20cmGT019 Soft Tissue Patch ePTFE 2mm Thickness 20 x 30cm
Vascular Prostheses, Human or Animal Origin
Bio Nova International Pty LtdBN006 Omniflow II Vascular Prosthesis - AV Access One size onlyBN007 Bio Nova Omniflow II Soft Tissue Patches 2mm thick 5cm x 10cmBN008 Bio Nova Omniflow II Soft Tissue Patches 2mm thick 10cm x 15cmBN009 Bio Nova Omniflow II Soft Tissue Patches 2mm thick 15cm x 20cmBN010 Bio Nova Omniflow II Soft Tissue Patches 2mm thick 20cm x 30cm
Boston Scientific Pty LtdBS007 Hemashield Microvel Double Velour Microvel Double Velour Straight (Sealed, Diameter: 6-24mm, Length: 15-100cm
Straight Vascular Grafts (Cryogenic) knitted textile graft)
BS008 Hemashield Woven Double Velour Woven Double Velour Straight (Sealed, Diameter: 6-38mm, Length: 15-60cmStraight Vascular Grafts (Cryogenic) woven textile graft)
BS009 Hemashield Microvel Double Velour Microvel Double Velour Bifurcated Diameter: 12-24mm x 6-12mm, Length: Bifurcated Grafts (Cryogenic) (Sealed, knitted textile graft) 40cm, 100cm x 60cm (side)
PART A - Prostheses List by Category, Groups and Sponsor Page 665 of 666
VASCULAR Minimum Maximum Benefit Benefit
Billing Code Product Name Description Size Level Level Notation
BS010 Hemashield Woven Double Velour Woven Double Velour Birfurcated Diameter: 12-24mm x 6-12mm, Length: Bifurcated Vascular Grafts (Cryogenic) (Sealed, woven textile graft)
BS011 Hemashield Vantage Vascular Grafts Woven polyester graft with single velour, Length x Diameter: 40-100cm x 6-10mmimpregnanted with purified bovine collagen
BS012 Hemashield Finesse Vascular Patch Ultra Thin Tapered End; Ultra Thin Length: 6-25mm x 75-150mmStraight End; Sealed patch suitable for carotid or other vessel patching
BS020 Cardiovascular Fabrics and Felts Hemashield Microvel Fabric, Hemashield Hemashield Microvel Fabric 8mm x Woven Double Velour Fabric (Material 75mm, 2.5-5cm x 7.5-15cm. Hemashield Composition: PET fabric impregnated Woven Double Velour Fabric 2.5-5cm x with bovine collagen)
PART A - Prostheses List by Category, Groups and Sponsor Page 666 of 666
PART B - Human Tissue February 2005CARDIO-THORACICBilling Code Facility Benefit
Aortic Valved Conduit PatchQHV09 Queensland Heart Valve Bank $4,706.00Heart Valve - AorticQHV01 Queensland Heart Valve Bank $4,706.00RPH01 Royal Perth Hospital $3,833.00SHV01 Sydney Heart Valve Bank, Darlinghurst NSW $5,350.00TBV01 Donor Tissue Bank of Victoria $5,663.00Heart Valve - PulmonaryQHV02 Queensland Heart Valve Bank $4,706.00RPH02 Royal Perth Hospital $3,833.00SHV02 Sydney Heart Valve Bank, Darlinghurst NSW $5,350.00TBV02 Donor Tissue Bank of Victoria $5,663.00Mitral Valve PatchQHV03 Queensland Heart Valve Bank $985.00PericardiumTBV50 Donor Tissue Bank of Victoria $421.00Pericardium PatchQHV05 Queensland Heart Valve Bank $985.00Pulmonary ConduitTBV03 Donor Tissue Bank of Victoria $869.00Pulmonary Conduit - LargeQHV07 Queensland Heart Valve Bank $985.00Pulmonary Conduit - SmallQHV06 Queensland Heart Valve Bank $985.00Pulmonary Valved Conduit For Patch useQHV08 Queensland Heart Valve Bank $4,706.00Tricuspid Valve PatchQHV04 Queensland Heart Valve Bank $985.00
PART B – Human Tissue Page 1 of 14
OPHTHALMICBilling Code Facility Benefit
CorneaLEM01 Lions Eye Bank - Melbourne $1,300.00LEN01 Lions NSW Eye Bank $1,000.00LEW01 The Lions Eye Bank of WA $1,000.00QEB01 Queensland Eye Bank $850.00SAE01 The Eye Bank of SA $840.00TBV04 Donor Tissue Bank of Victoria $800.00Cornea For LamellarLEN03 Lions NSW Eye Bank $600.00Cornea for ScleraLEM02 Lions Eye Bank - Melbourne $150.00LEN02 Lions NSW Eye Bank $150.00SAE02 The Eye Bank of SA $60.00ScleraQEB02 Queensland Eye Bank $150.00Sclera (white outer coating of the eyeball)LEW02 The Lions Eye Bank of WA $100.00
PART B – Human Tissue Page 2 of 14
ORTHOPAEDICBilling Code Facility Benefit
Achilles TendonNBB01 New South Wales Bone Bank $450.00QBB01 Queensland Bone Bank $1,210.00TBV05 Donor Tissue Bank of Victoria $864.00Achilles Tendon with Bone PlugNBB02 New South Wales Bone Bank $700.00PBT01 Perth Bone & Tissue Bank $1,900.00TBV06 Donor Tissue Bank of Victoria $1,760.00Anterior Cruciate Ligament UnitPBT02 Perth Bone & Tissue Bank $1,600.00Anterior Tibialis TendonPBT46 Perth Bone & Tissue Bank $1,300.00Autologous Chondrocyte TransplantationVAP01 Verigen Australia Pty Ltd $9,556.00Autologous ChondrocytesVAP03 Verigen Australia Pty Ltd $2,593.00Autologous ChrondocytesMUA01 Monash University, Dept of Surgery, Alfred Hospital, Tissue Culture Laboratory $8,694.43Bone - Chips/cubes 40ccTBV09 Donor Tissue Bank of Victoria $836.00Bone - Chips/cubes 80ccTBV10 Donor Tissue Bank of Victoria $1,590.00Bone Plug/Dowel - CancellousPBT03 Perth Bone & Tissue Bank $275.00TBV07 Donor Tissue Bank of Victoria $583.00Bone Plug/Dowel - TricorticalPBT04 Perth Bone & Tissue Bank $280.00TBV08 Donor Tissue Bank of Victoria $643.00Cartilage (costal) segmentsPBT11 Perth Bone & Tissue Bank $300.00
PART B – Human Tissue Page 3 of 14
ORTHOPAEDICBilling Code Facility Benefit QBB12 Queensland Bone Bank $200.00TBV17 Donor Tissue Bank of Victoria $335.00Cartogen, Autologous - Cultured CartilageMTE01 Mercy Tissue Engineering Pty Ltd $9,996.00Cortical Struts (Freeze Dried) 1 strutQBB02 Queensland Bone Bank $600.00Cortical Struts (1 strut)TBV14 Donor Tissue Bank of Victoria $655.00Cortical Struts (2 struts)TBV13 Donor Tissue Bank of Victoria $1,310.00Cortical Struts >15cmPBT07 Perth Bone & Tissue Bank $1,700.00Cortical Struts 10-15cmPBT06 Perth Bone & Tissue Bank $1,350.00Cortico - Cancellous Freeze Dried 20gQBB03 Queensland Bone Bank $1,390.00Cortico-Cancellous StripsPBT05 Perth Bone & Tissue Bank $700.00Disc - Freeze DriedQBB04 Queensland Bone Bank $650.00Dowel PlugNBB05 New South Wales Bone Bank $550.00PBT12 Perth Bone & Tissue Bank $450.00QBB13 Queensland Bone Bank $730.00Elbow - jointQBB14 Queensland Bone Bank $2,100.00TBV18 Donor Tissue Bank of Victoria $4,710.00Fascia LataTBV21 Donor Tissue Bank of Victoria $578.00Fascia Lata - Large (15cm x 10cm)
PART B – Human Tissue Page 4 of 14
ORTHOPAEDICBilling Code Facility Benefit PBT15 Perth Bone & Tissue Bank $1,300.00Fascia Lata - Small (>10cm x >5cm)NBB09 New South Wales Bone Bank $320.00Fascia Lata - Small (10cm x 5cm)PBT16 Perth Bone & Tissue Bank $800.00Fascia Lata (per sq cm)QBB11 Queensland Bone Bank $5.00Fascia Lata (per squared cm)NBB08 New South Wales Bone Bank $3.00Femoral CondylePBT21 Perth Bone & Tissue Bank $1,700.00Femoral HeadACT01 ACT Bone Bank $1,591.00APH01 The Avenue Private Hospital Prahan Victoria $1,131.00CSA01 Central Sydney Area Health t/a Rachel Forster Bone Bank $802.00DHR01 The Douglas Hocking Research Institute - Bone Bank $1,060.00HBB01 The Hobart Private Hospital Bone Bank $1,400.00LPH01 Lingard Private Hospital $1,103.00MMH01 Mater Misericordiae Hospital North Sydney $400.00MVS05 Institute of Medical & Veterinary Science, SA $1,200.00NBB16 New South Wales Bone Bank $1,483.00PBT22 Perth Bone & Tissue Bank $1,700.00QBB27 Queensland Bone Bank $1,425.00RNB01 The Royal Newcastle Hospital Bone Bank $1,619.00SVN01 St Vincent's Private Hospital (NSW) $731.00TBV26 Donor Tissue Bank of Victoria $1,683.00Femoral Head - Half (Freeze Dried)QBB29 Queensland Bone Bank $500.00Femoral Head - PortionPBT23 Perth Bone & Tissue Bank $450.00
PART B – Human Tissue Page 5 of 14
ORTHOPAEDICBilling Code Facility Benefit
Femoral Head - Whole (Freeze Dried)QBB28 Queensland Bone Bank $800.00Femoral RingsNBB17 New South Wales Bone Bank $250.00PBT24 Perth Bone & Tissue Bank $1,400.00QBB30 Queensland Bone Bank $910.00Femoral Rings - (Freeze Dried)QBB31 Queensland Bone Bank $650.00Femoral/Tibial Cortical Strut > 20CMPBT48 Perth Bone & Tissue Bank $1,900.00Femur - > 15cmQBB19 Queensland Bone Bank $1,110.00Femur - Cortical Portions < 15cmQBB17 Queensland Bone Bank $1,210.00Femur - Cortical portions> 1/3QBB18 Queensland Bone Bank $1,100.00Femur - Distal (shaft & condyles)PBT17 Perth Bone & Tissue Bank $2,600.00TBV22 Donor Tissue Bank of Victoria $2,736.00Femur - Distal HalfNBB10 New South Wales Bone Bank $1,400.00Femur - Distal half > 15cmQBB20 Queensland Bone Bank $2,020.00Femur - Distal Shaft & CondyleMVS02 Institute of Medical & Veterinary Science, SA $1,900.00Femur - Distal thirdNBB11 New South Wales Bone Bank $1,100.00Femur - Distal third < 15cmQBB21 Queensland Bone Bank $1,920.00
PART B – Human TissuePage 6 of 14
ORTHOPAEDICBilling Code Facility Benefit
Femur - EntireMVS03 Institute of Medical & Veterinary Science, SA $2,000.00NBB12 New South Wales Bone Bank $2,700.00PBT18 Perth Bone & Tissue Bank $4,600.00QBB22 Queensland Bone Bank $3,335.00TBV23 Donor Tissue Bank of Victoria $5,539.00Femur - Middle thirdNBB13 New South Wales Bone Bank $1,100.00PBT19 Perth Bone & Tissue Bank $2,200.00QBB23 Queensland Bone Bank $1,515.00TBV24 Donor Tissue Bank of Victoria $1,804.00Femur - Proximal (shaft,trochanter, neck)PBT20 Perth Bone & Tissue Bank $2,600.00TBV25 Donor Tissue Bank of Victoria $2,736.00Femur - Proximal halfNBB15 New South Wales Bone Bank $1,200.00Femur - Proximal half > 15cmQBB25 Queensland Bone Bank $2,220.00Femur - Proximal shaft & condyleMVS04 Institute of Medical & Veterinary Science, SA $1,900.00Femur - Proximal thirdNBB14 New South Wales Bone Bank $1,000.00Femur - Proximal third < 15cmQBB24 Queensland Bone Bank $1,770.00Femur - Trochanter MilledQBB26 Queensland Bone Bank $800.00Femur- 1 Condyle onlyTBV46 Donor Tissue Bank of Victoria $1,018.00Femur-Proximal(Shaft, trochanter, neck and head)TBV51 Donor Tissue Bank of Victoria $3,185.00
PART B – Human Tissue Page 7 of 14
ORTHOPAEDICBilling Code Facility Benefit
Fibula - EntireMVS07 Institute of Medical & Veterinary Science, SA $1,900.00NBB18 New South Wales Bone Bank $1,800.00PBT25 Perth Bone & Tissue Bank $1,950.00QBB32 Queensland Bone Bank $1,870.00TBV27 Donor Tissue Bank of Victoria $5,775.00Fibula - Segment (12cm)NBB20 New South Wales Bone Bank $450.00PBT27 Perth Bone & Tissue Bank $500.00TBV29 Donor Tissue Bank of Victoria $891.00Fibula - Segment (6cm)NBB19 New South Wales Bone Bank $300.00PBT26 Perth Bone & Tissue Bank $275.00TBV28 Donor Tissue Bank of Victoria $583.00Fibula - ShaftPBT28 Perth Bone & Tissue Bank $1,000.00TBV30 Donor Tissue Bank of Victoria $1,881.00Fibula Strut Segment <10cmMVS13 Institute of Medical & Veterinary Science, SA $1,900.00Fibula Strut Segment >10cmMVS14 Institute of Medical & Veterinary Science, SA $1,900.00Fibular Strut < 10cm:QBB06 Queensland Bone Bank $860.00Fibular Strut > 10cm:QBB07 Queensland Bone Bank $985.00Freeze Dried Milled Bone <30gmPBT37 Perth Bone & Tissue Bank $750.00Freeze Dried Milled Bone 30 - 50gmPBT38 Perth Bone & Tissue Bank $900.00Freeze-dried Cancellous Cubes (6)
PART B – Human Tissue Page 8 of 14
ORTHOPAEDICBilling Code Facility Benefit QBB09 Queensland Bone Bank $985.00Freeze-Dried Cancellous Strips (2)QBB10 Queensland Bone Bank $650.00Hemipelvis - AcetabulumNBB21 New South Wales Bone Bank $1,400.00PBT29 Perth Bone & Tissue Bank $2,400.00QBB33 Queensland Bone Bank $1,970.00TBV31 Donor Tissue Bank of Victoria $2,568.00Hemipelvis - CompleteMVS08 Institute of Medical & Veterinary Science, SA $1,900.00NBB24 New South Wales Bone Bank $2,400.00PBT30 Perth Bone & Tissue Bank $4,500.00QBB37 Queensland Bone Bank $3,335.00TBV32 Donor Tissue Bank of Victoria $5,825.00Hemipelvis - IIliac crestNBB22 New South Wales Bone Bank $1,000.00PBT31 Perth Bone & Tissue Bank $1,100.00QBB34 Queensland Bone Bank $1,710.00TBV33 Donor Tissue Bank of Victoria $2,321.00Hemipelvis - Tricortical wedgeQBB35 Queensland Bone Bank $655.00Hemipelvis - Tricortical wedge (Freeze Dried)QBB36 Queensland Bone Bank $700.00Hemipelvis -Tricortical iliac wedgeNBB23 New South Wales Bone Bank $400.00PBT32 Perth Bone & Tissue Bank $600.00TBV34 Donor Tissue Bank of Victoria $880.00Humeral headPBT36 Perth Bone & Tissue Bank $500.00QBB44 Queensland Bone Bank $1,000.00TBV37 Donor Tissue Bank of Victoria $1,419.00
PART A – Human Tissue Page 9 of 14
ORTHOPAEDICBilling Code Facility Benefit
Humeral Head AdditionNBB26 New South Wales Bone Bank $820.00Humerus - Cortical portions/blocks < 10cmQBB38 Queensland Bone Bank $760.00Humerus - Cortical portions/blocks > 10cmQBB39 Queensland Bone Bank $980.00Humerus - DistalMVS19 Institute of Medical & Veterinary Science, SA $1,900.00TBV49 Donor Tissue Bank of Victoria $1,892.00Humerus - Distal halfNBB25 New South Wales Bone Bank $1,200.00Humerus - EntireMVS20 Institute of Medical & Veterinary Science, SA $1,900.00NBB29 New South Wales Bone Bank $1,800.00QBB43 Queensland Bone Bank $2,220.00Humerus - Proximal halfNBB27 New South Wales Bone Bank $1,100.00QBB40 Queensland Bone Bank $910.00Humerus - Proximal half with rotator cuffNBB28 New South Wales Bone Bank $1,300.00QBB41 Queensland Bone Bank $1,895.00Humerus - Proximal with rotator cuffMVS09 Institute of Medical & Veterinary Science, SA $1,900.00PBT34 Perth Bone & Tissue Bank $2,500.00TBV35 Donor Tissue Bank of Victoria $2,233.00Humerus - Proximal w'out rotator cuffPBT35 Perth Bone & Tissue Bank $1,100.00QBB42 Queensland Bone Bank $910.00TBV36 Donor Tissue Bank of Victoria $1,980.00Humerus - Whole
PART B – Human Tissue Page 10 of 14
ORTHOPAEDICBilling Code Facility Benefit PBT33 Perth Bone & Tissue Bank $3,000.00Humerus - Whole with rotator cuffNBB30 New South Wales Bone Bank $1,950.00Matrix and Autologous Chondrocytes ImplantORT01 Orthogen Australia Pty Ltd $11,400.00Medial LigamentNBB31 New South Wales Bone Bank $550.00TBV38 Donor Tissue Bank of Victoria $1,529.00Meniscal GraftPBT47 Perth Bone & Tissue Bank $1,800.00MeniscusQBB05 Queensland Bone Bank $810.00Meniscus with LigamentsTBV39 Donor Tissue Bank of Victoria $1,842.00Meniscus without LigamentsTBV40 Donor Tissue Bank of Victoria $1,000.00Milled Bone - 30gmNBB03 New South Wales Bone Bank $300.00Milled Bone - 40ccTBV11 Donor Tissue Bank of Victoria $1,000.00Milled Bone - 60gmNBB04 New South Wales Bone Bank $500.00Milled Bone - 80ccTBV12 Donor Tissue Bank of Victoria $1,788.00Milled Bone (60cc)QBB45 Queensland Bone Bank $1,325.00Milled Bone (60g max)QBB46 Queensland Bone Bank $1,200.00Milled Bone <30gr
PART B – Human Tissue Page 11 of 14
ORTHOPAEDICBilling Code Facility Benefit PBT08 Perth Bone & Tissue Bank $1,350.00Milled Bone >50grPBT10 Perth Bone & Tissue Bank $2,000.00Milled Bone 30 - 50grPBT09 Perth Bone & Tissue Bank $1,800.00Milled Bone 40ccTBV15 Donor Tissue Bank of Victoria $760.00Milled Bone 80ccTBV16 Donor Tissue Bank of Victoria $1,445.00PatellaNBB32 New South Wales Bone Bank $450.00QBB47 Queensland Bone Bank $750.00TBV41 Donor Tissue Bank of Victoria $875.00Patella HalfPBT39 Perth Bone & Tissue Bank $275.00Patella tendonQBB48 Queensland Bone Bank $1,365.00Patella Tendon and PatellaPBT40 Perth Bone & Tissue Bank $1,900.00TBV42 Donor Tissue Bank of Victoria $1,842.00Patella tendon with Bone PlugsNBB33 New South Wales Bone Bank $900.00Primary MACI plus 1/2 VAP02 Verigen Australia Pty Ltd $10,891.00Proximal Third Tibia with - Patella TendonQBB08 Queensland Bone Bank $2,020.00RadiusMVS18 Institute of Medical & Veterinary Science, SA $1,900.00NBB06 New South Wales Bone Bank $1,500.00PBT13 Perth Bone & Tissue Bank $1,800.00
PART B– Human Tissue Page 12 of 14
ORTHOPAEDICBilling Code Facility Benefit QBB15 Queensland Bone Bank $1,515.00TBV19 Donor Tissue Bank of Victoria $2,673.00Rib (5cm)PBT41 Perth Bone & Tissue Bank $300.00TBV43 Donor Tissue Bank of Victoria $418.00RIB -Segments 5 - 10 CMMVS21 Institute of Medical & Veterinary Science, SA $315.00ScaphoidQBB49 Queensland Bone Bank $900.00Tibia - Condyles onlyTBV47 Donor Tissue Bank of Victoria $1,425.00Tibia - Cortical < 15cmQBB50 Queensland Bone Bank $925.00Tibia - Cortical > 15 cmQBB51 Queensland Bone Bank $1,210.00Tibia - DistalMVS17 Institute of Medical & Veterinary Science, SA $1,900.00TBV48 Donor Tissue Bank of Victoria $1,837.00Tibia - Middle third segNBB34 New South Wales Bone Bank $1,000.00PBT43 Perth Bone & Tissue Bank $1,100.00QBB53 Queensland Bone Bank $900.00Tibia - Plateau (prox 1/3)NBB35 New South Wales Bone Bank $1,100.00Tibia - Proximal third < 15cmQBB54 Queensland Bone Bank $1,715.00Tibia - Proximal: without PatellaPBT45 Perth Bone & Tissue Bank $1,100.00Tibia - Proximal: 16-25cmMVS12 Institute of Medical & Veterinary Science, SA $1,900.00
PART B – Human Tissue Page 13 of 14
ORTHOPAEDICBilling Code Facility Benefit TBV45 Donor Tissue Bank of Victoria $2,118.00Tibia - Proximal: 7-15cmMVS11 Institute of Medical & Veterinary Science, SA $1,900.00TBV44 Donor Tissue Bank of Victoria $1,832.00Tibia - Proximal: halfNBB36 New South Wales Bone Bank $1,300.00Tibia - Proximal: with Patella & TendonPBT44 Perth Bone & Tissue Bank $1,900.00Tibia - StrutPBT42 Perth Bone & Tissue Bank $700.00QBB52 Queensland Bone Bank $400.00Tibia - WholeMVS16 Institute of Medical & Veterinary Science, SA $1,900.00NBB37 New South Wales Bone Bank $2,400.00QBB55 Queensland Bone Bank $3,335.00UlnaMVS15 Institute of Medical & Veterinary Science, SA $1,900.00NBB07 New South Wales Bone Bank $1,500.00PBT14 Perth Bone & Tissue Bank $1,500.00QBB16 Queensland Bone Bank $1,515.00TBV20 Donor Tissue Bank of Victoria $2,464.00
PART B – Human Tissue Page 14 of 14