Post on 04-Apr-2015
We know hydraulics!Pressure Dynamics
18 Tarlton Crescent, Perth International Airport WA 6105Tel: (08) 9473 7277 Fax: (08) 9473 7298Email: pd@pressuredynamics.com.auWeb: www.pressuredynamics.com.au
cast iron & aluminiumGear Pumps & Motors
CommercialHydraulics
PREM I E R
DISTRIBUTOR
PREM I E R
DISTRIBUTOR
Parker Commercial Hydraulics is the world’s leading supplier of OEM hydraulic components, giving your plant and equipment the hydraulic power to keep running day in day out, week after week, year after year.
Pressure Dynamics supports the full range of “GENUINE” components supplied by Parker Commercial Hydraulics, including pumps, motors, valves and spares, backed by premier customer service. Parker Commercial Hydraulic gear pumps are available in single, multiple, piggyback and thru-drive assemblies.
Parker manufacture hydraulic components for a wide range of industries including:
ConstructionRefuse / Dump TruckMaterial HandlingForestryAgricultureIndustrial
Every minute your machine is idle costs you money, which is why Parker Commercial Hydraulics components give you the power to extract the maximum value from your plant and equipment.
Pressure Dynamics is an authorised Parker Commercial Hydraulics build centre guaranteeing a 24 hour turn around on most pump orders.
We know hydraulics!
Premier Parker Distributor & Authorised Build Centre
18 Tarlton CrescentPerth International Airport, WA, 6105
Tel: (08) 9473 7277 Fax: (08) 9473 7298E-mail: pd@pressuredynamics.com.au
Web: www.pressuredynamics.com.au
cast iron & aluminiumGear Pumps & Motors
CommercialHydraulics
CommercialHydraulics
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, tel: (08) 9473 7277
Cast Iron Gear Pumps & MotorsPGP Cast Iron Pump Specification Sheet 1
30/31, 50/51, 75/76 Series—Pricing (bearing type) 2
30/31, 50/51, 75/76 Series—Product Codes 3
30/31 Series—Exploded View and Parts List 6
50/51 Series—Exploded View and Parts List 10
75/76 Series—Exploded View and Parts List 14
300 Series—Pricing (bush type) 18
315, 330, 350, 365 Series—Product Codes 19
315 Series—Exploded View and Parts List 23
330 Series—Exploded View and Parts List 27
350 Series—Exploded View and Parts List 31
365 Series—Exploded View and Parts List 35
Standard Seal Kits 39
Aluminium Pumps “Stock Program”500 Series—Characteristics 40
511 Series—SAE ‘A’ 2 bolt, 5/8” Keyed Shaft 41
511 Series—SAE ‘A’ 2 bolt, 3/4” Keyed Shaft 42
511 Series—SAE ’A’ 2 bolt, 5/8 9T Spline 43
511 Series—SAE ‘A’ 2 bolt, 3/4 11T Spline 44
511 Series—DIN 4 bolt, 1:8 Taper Shaft 45
511 Series—Tandem Kits 46
Aluminium Pumps & Motors “Made to Order Program”505 Series—Product Codes 47
511 Series—Product Codes 48
517 Series—Product Codes 49
Truck Pumps
Truck Pump Cross Reference 50
Contents
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
05 07 10 12 15 17 20 22 25 27 30
Gear width 1/2” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3”
30/31 Housing size (in) 1.25 1.50 1.75 2.0 2.25 2.50 2.75 3.00 3.25
Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55
Displacement cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60 72.60 80.10
Displacement ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94 4.43 4.89
30 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,250 2,250 2,000 2,000
30 Pressure (Bar) 172 172 172 172 172 155 155 138 138
31 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,200 2,200
31 Pressure (Bar) 207 207 207 207 207 172 172 153 153
50/51 Housing size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25
Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55
Displacement cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50
Displacement ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38
50 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,000 2,000 2,000 2,000
50 Pressure (Bar) 172 172 172 172 172 138 138 138 138
51 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,500
51 Pressure (Bar) 207 207 207 207 207 207 172 172 172
75/76 Housing size (in) 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00
Housing size (mm) 44.45 50.80 57.15 63.50 69.85 76.20 82.55 88.90 95.25 101.60
Displacement cc/rev 50.40 67.20 84.00 100.80 117.60 134.40 151.20 168.00 184.80 201.60
Displacement ci/rev 3.08 4.10 5.13 6.15 7.18 8.20 9.23 10.25 11.28 12.30
75 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,500 2,250 2,250 2,000 2,000
75 Pressure (Bar) 172 172 172 172 172 172 155 155 138 138
76 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,500 2,000 2,000
76 Pressure (Bar) 207 207 207 207 207 172 172 172 138 138
315 Housing size (in) 0.90 1.14 1.40 1.64 1.90 2.14 2.40
Housing size (mm) 22.86 28.96 35.56 41.66 48.26 54.36 60.96
Displacement cc/rev 10.20 15.20 20.30 25.40 30.50 35.60 40.60
Displacement ci/rev 0.62 0.93 1.24 1.55 1.86 2.17 2.48
315 Pressure (Psi) 3,500 3,500 3,500 3,500 3,300 2,900 2,500
315 Pressure (Bar) 241 241 241 241 228 200 172
330 Housing size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50
Housing size (mm) 25.40 31.75 38.10 44.45 50.80 57.15 63.50
Displacement cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60
Displacement ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94
330 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,250 3,000
330 Pressure (Bar) 241 241 241 241 241 224 207
350 Housing size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
Housing size (mm) 25.40 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20
Displacement cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50
Displacement ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38
350 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,250 3,000 2,750 2,500
350 Pressure (Bar) 241 241 241 241 241 224 207 190 172
365 Housing size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00
Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20
Displacement cc/rev 44.30 59.00 73.80 88.50 103.50 118.00 132.00 147.50
Displacement ci/rev 2.70 3.60 4.50 5.40 6.30 7.20 8.05 9.00
365 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,500 3,250 3,000
365 Pressure (Bar) 241 241 241 241 241 241 224 207
PGP Cast Iron Pump Specifications
Note: Performance data shown are the average results based on a series of tests of production units and are not necessarily representative of any one unit.
Page 1
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
30/31 seriesmodel gear size
P 30/31 1/2” - 2”
M 30/31 1/2” - 2”
Additional Section (motor or pump) 1/2” - 2”
50/51 seriesmodel gear size
P 50/51 3/4” - 2-1/2”
M 50/31 3/4” - 2-1/2”
Additional Section (motor or pump) 3/4” - 2-1/2”
P30/31, 50/51, 75/76 Series Cast Iron Gear Pumps and Motors
75/76 seriesmodel gear size
P 75/76 1/2” - 3”
M 75/76 1/2” - 3”
Additional Section (motor or pump) 1/2” - 3”
Note: All units are made to order. Lead times may vary.
Special modifications 30/31, 50/51, 75/76model 30/31 50/51 75/76
Two speed motor drive - - POA
Add-A-Pump (KO/LO) POA POA POA
Two speed bearing carrier - POA -
Integral shafts (one piece) POA POA POA
Page 2
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
30/31 Series Pumps & Motors
For multiple units repeat if necessary
C -1
Code Type
P Pump
M Motor
Series
30 Non Doweled
31 Doweled
Shaft End Cover
Code Description
405 Pump, CW, 6 bolt flange
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
494 Pump, CW, SAE 2 bolt ‘A’
497 Pump, CW, SAE 2 bolt ‘B’
505 Pump, CCW, 6 bolt flange
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
594 Pump, CCW, SAE 2 bolt ‘A’
597 Pump, CCW, SAE 2 bolt ‘B’
605 Pump, Bi-Rot, 6 bolt flange
642 Pump, Bi-Rot, SAE 4 bolt ‘B’
678 Pump, Bi-Rot, SAE 4 bolt ‘C’
694 Pump, Bi-Rot, SAE 2 bolt ‘A’
697 Pump, Bi-Rot, SAE 2 bolt ‘B’
805 Motor, 1/4” NPT drain, 6 bolt flange
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
894 Motor, 1/4” NPT drain, SAE 2 bolt ‘A’
897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
1805 Motor, 1/4” BSPP drain, 6 bolt flange
1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’
1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’
1894 Motor, 1/4” BSPP drain, SAE 2 bolt ‘A’
1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’
Port End Cover
Code Description
BE Unported single section unit
BI Unported tandem section unit
BY Unported single/tandem sec-tion unit w/ extended studs
** Ported port end cover, specify port type & location
Gear Housing
Code Description
AB05 1/2” unported gear housing
AB07 3/4” unported gear housing
AB10 1” unported gear housing
AB12 1-1/4” unported gear housing
AB15 1-1/2” unported gear housing
AB17 1-3/4” unported gear housing
AB20 2” unported gear housing
**07 3/4” ported gear housing, specify port types
**10 1” ported gear housing, specify port types
**12 1-1/4” ported gear housing, specify port types
**15 1-1/2” ported gear housing, specify port types
**17 1-3/4” ported gear housing, specify port types
**20 2” ported gear housing, specify port types
Shaft Type
Code Description
-7 SAE ‘C’ 14 tooth spline 1.25” dia.
-25 SAE ‘B’ 13 tooth spline 0.88” dia.
-30 SAE ‘B’ keyed 0.88” dia.
-43 SAE ‘BB’ keyed 1.00” dia.
-68 6 tooth spline 1.00” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
How to specify
Page 3
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
C -1
Code Type
P Pump
M Motor
Series
50 Non Doweled
51 Doweled
Shaft End Cover
Code Description
400 Pump, CW, 4 bolt pad mount
405 Pump, CW, 6 bolt flange
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
497 Pump, CW, SAE 2 bolt ‘B’
498 Pump, CW, SAE 2 bolt ‘C’
500 Pump, CCW, 4 bolt pad mount
505 Pump, CCW, 6 bolt flange
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
597 Pump, CCW, SAE 2 bolt ‘B’
598 Pump, CCW, SAE 2 bolt ‘C’
605 Pump, Bi-Rot, 6 bolt flange
642 Pump, Bi-Rot, SAE 4 bolt ‘B’
678 Pump, Bi-Rot, SAE 4 bolt ‘C’
697 Pump, Bi-Rot, SAE 2 bolt ‘B’
698 Pump, Bi-Rot, SAE 2 bolt ‘C’
805 Motor, 1/4” NPT drain, 6 bolt flange
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’
1805 Motor, 1/4” BSPP drain, 6 bolt flange
1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’
1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’
1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’
1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’
Port End Cover
Code Description
BE Unported single section unit
BI Unported tandem section unit
BY Unported single/tandem sec-tion unit w/ extended studs
** Ported end cover, specify port type & location
Gear Housing
Code Description
AB05 1/2” unported gear housing
AB07 3/4” unported gear housing
AB10 1” unported gear housing
AB12 1-1/4” unported gear housing
AB15 1-1/2” unported gear housing
AB17 1-3/4” unported gear housing
AB20 2” unported gear housing
AB22 2-1/4” unported gear housing
AB25 2-1/2” unported gear housing
**07 3/4” ported gear housing, specify port types
**10 1” ported gear housing, specify port types
**12 1-1/4” ported gear housing, specify port types
**15 1-1/2” ported gear housing, specify port types
**17 1-3/4” ported gear housing, specify port types
**20 2” ported gear housing, specify port types
**22 2-1/4” ported gear housing, specify port types
**25 2-1/2” ported gear housing, specify port types
Shaft Type
Code Description
-7 SAE ‘C’ 14 tooth spline 1.25” dia.
-11 SAE ‘C’ keyed 1.25” dia
-25 SAE ‘B’ 13 tooth spline 0.88” dia.
-43 SAE ‘BB’ keyed 1.00” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
For multiple units repeat if necessary
50/51 Series Pumps & Motors
How to specify
Page 4
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
75/76 Series Pumps & Motors
For multiple units repeat if necessary
C -1
Code Type
P Pump
M Motor
Series
75 Non Doweled
76 Doweled
Shaft End Cover
Code Description
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
480 Pump, CW, SAE 4 bolt ‘D’
498 Pump, CW, SAE 2 bolt ‘C’
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
580 Pump, CCW, SAE 4 bolt ‘D’
598 Pump, CCW, SAE 2 bolt ‘C’
642 Pump, Bi-Rot, SAE 4 bolt ‘B’
678 Pump, Bi-Rot, SAE 4 bolt ‘C’
680 Pump, Bi-Rot, SAE 4 bolt ‘D’
698 Pump, Bi-Rot, SAE 2 bolt ‘C’
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
880 Motor, 1/4” NPT drain, SAE 4 bolt ‘D’
898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’
1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’
1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’
1880 Motor, 1/4” BSPP drain, SAE 4 bolt ‘D’
1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’
Port End Cover
Code Description
BE Unported single section unit
BI Unported tandem section unit
BY Unported single/tandem sec-tion unit w/ extended studs
** Ported end cover, specify port type & location
Gear Housing
Code Description
AB07 1/2” unported gear housing
AB10 3/4” unported gear housing
AB12 1” unported gear housing
AB15 1-1/4” unported gear housing
AB17 1-1/2” unported gear housing
AB20 1-3/4” unported gear housing
AB22 2-1/4” unported gear housing
AB25 2-1/2” unported gear housing
AB27 2-3/4” unported gear housing
AB30 3” unported gear housing
**07 3/4” ported gear housing, specify port types
**10 1” ported gear housing, specify port types
**12 1-1/4” ported gear housing, specify port types
**15 1-1/2” ported gear housing, specify port types
**17 1-3/4” ported gear housing, specify port types
**20 2” ported gear housing, specify port types
**22 2-1/4” ported gear housing, specify port types
**25 2-1/2” ported gear housing, specify port types
**27 2-3/4” ported gear housing, specify port types
**30 3” ported gear housing, specify port types
Shaft Type
Code Description
-7 SAE ‘C’ 14 tooth spline 1.25” dia.
-11 SAE ‘C’ keyed 1.25” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
How to specify
Page 5
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
30/31 Series
item description
1 Snap Ring
2 Outboard Bearing
Outboard Spacer
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Seal Retainer (motors and c-shafts)
5 Continental Shaft
6 Spacer
7 Retaining Ring
8 Shaft End Cover
9 Check Valve Assembly (for motors and bi-rotational pumps)
Check Plug (pumps only)
10 Ring Seals
item description
11 Roller Bearings
12 Thrust Plates (motor)
Thrust Plates (pump)
13 Seal Strip
14 Integral Gear Set
15 Gasket Seals
16 Gear Housing
17 Bearing Carrier
18 Connecting Shaft
19 Gear Set
20 Port End Cover
21 Washers
22 Cap Screws (single units)
Studs (multiple units)
23 Nuts (multiple units)
24 Dowel Pins (31 series)
Continental shaft only
Integral shaft only
Page 6
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
item description part number quantity
1 Snap ring 391-2686-063 1
2 Outboard bearing 391-0381-040 1
Outboard spacer 391-3383-069 1
3 Shaft seal (integral pump) 391-2883-058 1
Shaft seal (c-shaft pump) 391-2883-107 1
Shaft seal (integral motor) 391-2883-119 1
Shaft seal (c-shaft motor) 391-2883-126 1
4 Seal retainer (motors and c-shafts) 391-3381-040 1
5 Continental shaft 312-XXXX-XXX 1
6 Spacer 312-0100-002 1
7 Retaining ring 391-2685-011 1
8 Shaft end cover 312-50XX-XXX 1
9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2
Check plug 391-2286-004 1
10 Ring seals (per section) 391-2585-006 2
11 Roller bearings (per gear section) 391-0381-068 4
12 Thrust plates (motor) per gear section 391-2185-013 2
Thrust plates (pump) per gear section 391-2185-031 2
13 Seal strip (per section) 391-2882-022 (viton) 1
Seal strip (per section) 391-2882-051 (buna) 1
14 Integral gear set 312-29XX-XXX 1
15 Gasket seals (per section) 391-2884-050 2
16 Gear housing 312-82XX-XXX 1
17 Bearing carrier 312-7740-100 specify porting (if required)
1
18 Connecting shaft 312-1133-001 1
19 Gear set 312-28XX-000 1
20 Port end cover 312-XXXX-XXX 1
21 Washers 391-3784-028 4
22 Cap screws (single units only) 391-1401-XXX specify length, in inches
4
Studs (multiple units only) 391-1425-XXX specify length, in inches
4
23 Nuts (multiple units only) 391-1451-076 4
24 Dowel pins (31 series only) per gear section 391-2082-032 4
30/31 Series Pumps & Motors
Page 7
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
30/31 Series Pumps & Motors
Continental shafts item description part number
5 SAE 'BB' 15 tooth 1" dia 312-1000-401
SAE 'C' keyed 1.25" dia 991-1356-704
SAE 'C' 14 tooth 1.25" dia 312-1000-502
SAE 'BB' keyed 1" dia modified length 312-1500-400
SAE 'B' keyed with 5/8"-18 thread, 7/8" dia modified length 312-1135-171
SAE 'B' keyed 7/8" dia 312-1500-300
SAE 'B' 13 tooth 7/8" dia 2.1/8" standout 991-1351-132
SAE 'B' 13 tooth 7/8" dia 312-1135-138
SAE 'A' 9 tooth 5/8" dia 991-1353-095
8 tooth spline 7/8" dia power auto PTO 1" standout 991-1353-498
7/8" keyed 312-1135-192
6 tooth 1" dia 312-1000-003
3/4" keyed 312-1135-191
3/4 11 tooth 991-1353-347
10 tooth 11/16" dia 991-1353-039
Shaft end coversitem description part number
8 Pad mount (suit 30 and 31) 312-5017-201
SAE 'B' 2 bolt (suit 30 and 31) 312-5027-201
SAE 'A' 2 bolt (suit 30 and 31) 312-5027-204
SAE 'B' 2 bolt type 2 (suit 30 and 31) 312-5027-205
SAE 'C' 4 bolt w/priming aid valve (P30 series only) lube pumps
312-5033-206
SAE 'B' 4 bolt (suit 30 and 31) 312-5037-201
SAE 'C' 4 bolt (suit 30 and 31) 312-5037-202
6 bolt round w/priming aid valve (P30 series only) lube pumps 312-5043-203
6 bolt round (suit 30 and 31) 312-5047-201
75-30 piggyback shaft end cover 312-5026-204
31-31 & 51-31 piggyback shaft end cover 312-5027-208
76-31 piggyback shaft end cover 312-5027-209
30-30 piggyback shaft end cover 312-5029-210
Gear housingitem description part number
16 1/2" gear - 31.75mm housing 312-8205-100
3/4” gear - 38.10mm housing 312-8207-100
1” gear - 44.5mm housing 312-8210-100
1-1/4” gear - 50.80mm housing 312-8212-100
1-1/2" gear - 57.15mm housing 312-8215-100
1-3/4" gear - 63.50mm housing 312-8217-100
2" gear - 69.85mm housing 312-8220-100
Port end coversitem description part number
20 Port end cover (suit 30 and 31) 312-3220-100
Port end cover for rear ports (suit 30 and 31) 312-3420-100
31-31 piggyback port end cover 312-5027-212
30-30 piggyback port end cover 312-5029-213
Page 8
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
30/31 Series Pumps & Motors
Integral gear setsitem description part number
14 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2907-230
3/4" gear set - SAE 'B' keyed 7/8" dia 312-2907-730
3/4" gear set - SAE 'BB' keyed 1" dia 312-2907-740
1" gear set - SAE 'A' 9 tooth 5/8" dia 312-2910-122
1" gear set - SAE 'B' 13 tooth 7/8" dia 312-2910-230
1" gear set - SAE 'BB' 15 tooth 1" dia 312-2910-240
1" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2910-430
1" gear set - SAE 'B' keyed 7/8" dia 312-2910-730
1" gear set - SAE 'BB' keyed 1" dia 312-2910-740
1-1/4" gear set - SAE 'A' 9 tooth 5/8" dia 312-2912-122
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2912-230
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2912-430
1-1/4" gear set - SAE 'B' keyed 7/8" dia 312-2912-730
1-1/4" gear set - SAE 'BB' keyed 1" dia 312-2912-740
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 312-2915-230
1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 312-2915-240
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2915-430
1-1/2" gear set - SAE 'B' keyed 7/8" dia 312-2915-730
1-1/2" gear set - SAE 'BB' keyed 1" dia 312-2915-740
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2917-230
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2917-430
1-3/4" gear set - SAE 'B' keyed 7/8" dia 312-2917-730
1-3/4" gear set - SAE 'BB' keyed 1" dia 312-2917-740
2" gear set - SAE 'B' 13 tooth 7/8" dia 312-2920-230
2" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2920-430
2" gear set - SAE 'B' keyed 7/8" dia 312-2920-730
2" gear set - SAE 'BB' keyed 1" dia 312-2920-740
Gear setsitem description part number
19 1/2" gear set 312-2805-000
3/4" gear set 312-2807-000
1" gear set 312-2810-000
1-1/4" gear set 312-2812-000
1-1/2" gear set 312-2815-000
1-3/4" gear set 312-2817-000
2" gear set 312-2820-000
Page 9
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
50/51 Series
Continental shaft only
Integral shaft only
item description
1 Snap Ring
2 Outboard Bearing
Outboard Spacer
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Seal Retainer (motors and c-shafts)
5 Continental Shaft
6 Spacer
7 Retaining Ring
8 Shaft End Cover
9 Check Valve Assembly (for motors and bi-rota-tional pumps)
Check Plug (pumps only)
10 Ring Seals
item description
11 Roller Bearings
12 Thrust Plates (motor)
Thrust Plates (pump)
13 Seal Strip
14 Integral Gear Set
15 Gasket Seals
16 Gear Housing
17 Bearing Carrier
18 Connecting Shaft
19 Gear Set
20 Port End Cover
21 Washers
22 Cap Screws (single units)
Studs (multiple units)
23 Nuts (multiple units)
24 Dowel Pins (51 series)
Page 10
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
50/51 Series Pumps & Motors
item description part number quantity
1 Snap ring 391-2686-065 1
2 Outboard bearing 391-0381-077 1
Outboard spacer 391-3383-087 1
3 Shaft seal (integral pump) 391-2883-103 1
Shaft seal (c-shaft pump) 391-2883-133 1
Shaft seal (integral motor) 391-2883-115 1
Shaft seal (c-shaft motor) 391-2883-186 1
4 Seal retainer (motors and c-shafts) 391-3383-020 1
5 Continental shaft 313-XXXX-XXX specify shaft type
1
6 Spacer 313-3381-046 1
7 Retaining ring 391-2685-040 1
8 Shaft end cover 313-50XX-XXX specify mounting type
1
9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2
Check plug 391-2286-004 1
10 Ring seals (per section) 391-2585-009 2
11 Roller bearings (per gear section) 391-0381-059 4
12 Thrust plates (motor) per gear section 391-2185-012 2
Thrust plates (pump) per gear section 391-2185-029 2
13 Seal strip (per section) 391-2882-022 (viton) 1
Seal strip (per section) 391-2882-051 (buna) 1
14 Integral gear set 313-29XX-XXX specify gear width and shaft type
1
15 Gasket seals (per section) 391-2884-021 2
16 Gear housing 313-82XX-XXX specify housing width & ports (if
required)
1
17 Bearing carrier 313-7740-100 specify porting (if required)
1
18 Connecting shaft 313-1133-001 1
19 Gear set 313-28XX-000 specify gear width
1
20 Port end cover 313-3120-100 specify porting (if required)
1
21 Washers 391-3784-028 4
22 Cap screws (single units only) 391-1401-XXX specify length, in inches
4
Studs (multiple units only) 391-1425-XXX specify length, in inches
4
23 Nuts (multiple units only) 391-1451-076 4
24 Dowel pins (51 series only) per gear section 391-2082-032 4
Page 11
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
50/51 Series Pumps & Motors
Continental shaftsitem description part number
5 SAE 'C' keyed 1.25" dia no shoulder 313-1500-004
SAE 'C' keyed 1.25" dia 313-1500-500
SAE 'C' 14 tooth 1.25" dia 313-1135-194
SAE 'BB' keyed 1" dia 313-1500-400
SAE 'BB' 15 tooth 1" dia 313-1000-400
SAE 'B' 13 tooth 7/8" dia 313-1000-300
Shafts end coveritem description part number
8 Pad mount (suit 50 and 51) 313-5017-201
SAE 'B' 2 bolt (suit 50 and 51) 313-5027-201
SAE 'C' 2 bolt (suit 50 and 51) 313-5027-202
SAE 'C' 2 bolt type 2 (suit 50 and 51) 313-5027-206
SAE 'C' 4 bolt w/priming aid valve (P50 series only) lube pumps
313-5033-203
SAE 'B' 4 bolt (suit 50 and 51) 313-5037-201
SAE 'C' 4 bolt (suit 50 and 51) 313-5037-202
6 bolt round (suit 50 and 51) 313-5047-201
51-51 piggyback shaft end cover 313-5027-208
76-51 piggyback shaft end cover 313-5027-209
51-31 piggyback shaft end cover 313-5027-212
50-30 piggyback shaft end cover 313-5029-205
Gear housingitem description part number
16 1/2" gear - 31.75mm housing 313-8205-100
3/4" gear - 38.10mm housing 313-8207-100
1" gear - 44.45mm housing 313-8210-100
1-1/4" gear - 50.80mm housing 313-8212-100
1-1/2" gear - 57.15mm housing 313-8215-100
1-3/4" gear - 63.50mm housing 313-8217-100
2" gear - 69.85mm housing 313-8220-100
2-1/4" gear - 76.20mm housing 313-8222-100
2-1/2" gear - 82.55mm housing 313-8225-100
If porting is required please specify port type and size
Page 12
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Integral gear setsitem description part number
14 1" gear set - SAE 'B' 13 tooth 7/8" dia 313-2910-230
1" gear set - SAE 'C' 14 tooth 1.25" dia 313-2910-250
1" gear set - SAE 'C' keyed 1.25" dia 313-2910-750
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2912-230
1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2912-250
1-1/4" gear set - SAE 'BB' keyed 1" dia 313-2912-740
1-1/4" gear set - SAE 'C' keyed 1.25" dia 313-2912-750
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2915-230
1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2915-250
1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia (type 2 only) 313-2915-330
1-1/2" gear set - SAE 'BB' keyed 1" dia 313-2915-740
1-1/2" gear set - SAE 'C' keyed 1.25" dia 313-2915-750
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2917-230
1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2917-250
1-3/4" gear set - SAE 'BB' keyed 1" dia 313-2917-740
1-3/4" gear set - SAE 'C' keyed 1.25" dia 313-2917-750
2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2920-230
2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2920-250
2" gear set - SAE 'BB' keyed 1" dia 313-2920-740
2" gear set - SAE 'C' keyed 1.25" dia 313-2920-750
2-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2922-230
2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2922-250
2-1/4" gear set - SAE 'C' keyed 1.25" dia 313-2922-750
2-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2925-230
2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2925-250
2-1/2" gear set - SAE 'BB' keyed 1" dia 313-2925-740
2-1/2" gear set - SAE 'C' keyed 1.25" dia 313-2925-750
Gear sets19 1/2" gear set 313-2805-000
3/4" gear set 313-2807-000
1" gear set 313-2810-000
1-1/4" gear set 313-2812-000
1-1/2" gear set 313-2815-000
1-3/4" gear set 313-2817-000
2" gear set 313-2820-000
2-1/4" gear set 313-2822-000
2-1/2" gear set 313-2825-000
50/51 Series Pumps & Motors
Page 13
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
75/76 Series
item description
1 Snap Ring
2 Outboard Bearing
Outboard Spacer
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Seal Retainer (motor)
5 Continental Shaft
6 Spacer
7 Retaining Ring
8 Shaft End Cover
9 Check Valve Assembly (for motors andbi-rotational pumps)
item description
Check Plug (pumps only)
10 Ring Seals
11 Roller Bearings
12 Thrust Plates (motor)
Thrust Plates (pump)
13 Seal Strip
14 Integral Gear Set
15 Gasket Seals
16 Gear Housing
17 Bearing Carrier
18 Connecting Shaft
19 Gear Set
20 Port End Cover
21 Washers
22 Cap Screws (single units)
Studs (multiple units)
23 Nuts (multiple units)
24 Dowel Pins (76 series)
25 ‘O’ Ring
Page 14
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
75/76 Series Pumps & Motors
item description part number quantity
1 Retaining ring 391-2686-025 1
2 Outboard bearing 391-0381-078 1
Outboard spacer 391-3383-018 1
3 Shaft seal (pump) 391-2883-052 1
Shaft seal (motor) 391-2883-094 1
4 Seal retainer (pump) 391-2584-082
Seal retainer (motor) 391-2584-051 1
5 Continental shaft 316-XXXX-XXX specify shaft type
1
6 Spacer 313-3381-039 1
7 Retaining ring 391-2685-029 1
8 Shaft end cover 316-50XX-XXX specify mounting type
1
9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2
Check plug 391-2286-004 1
10 Ring seals (per section) 391-2585-011 2
11 Roller bearings (per gear section) 391-0381-060 4
12 Thrust plates (motor) per gear section 391-2185-020 2
Thrust plates (pump) per gear section 391-2185-026 2
13 Seal strip (per section) 391-2882-019 (viton) 1
Seal strip (per section) 391-2882-084 (buna) 1
14 Integral gear set 316-29XX-XXX specify gear width and shaft type
1
15 Gasket seals (per section) 391-2884-021 2
16 Gear housing 316-82XX-XXXspecify housing width and ports (if
required)
1
17 Bearing carrier 316-7XXX-XXXspecify porting (if required)
1
18 Connecting shaft 316-1133-001 1
19 Gear set 316-28XX-000specify gear width
1
20 Port end cover 316-3120-100specify porting (if required)
1
21 Washers 391-3784-028 4
22 Cap screws (single units only) 391-1401-XXX specify length, in inches
4
Studs (multiple units only) 391-1425-XXXspecify length, in inches
4
23 Nuts (multiple units only) 391-1451-076 4
24 Dowel pins (76 series only) per gear section 391-2082-033 4
25 ‘O’ Ring N0674 2-146 1
Page 15
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
75/76 Series Pumps & Motors
Continental shaftsitem description part number
5 SAE 'C' keyed 1.25" dia 316-1135-147
SAE 'C' 14 tooth 1.25" dia 316-1135-148
SAE 'D' 13 tooth 1.75" dia 316-1000-701
SAE 'C' 14 tooth 1.25" dia extra long 991-1357-007
Shaft end coversitem description part number
8 SAE 'C' 2 bolt (suit 75 and 76) 316-5027-202
SAE 'B' 4 bolt (suit 75 and 76) 316-5037-201
SAE 'C' 4 bolt (suit 75 and 76) 316-5037-202
SAE 'D' 4 bolt (suit 75 and 76) 316-5037-203
Gear housingitem description part number
16 3/4" gear - 38.10mm housing 316-8207-100
1" gear - 44.45mm housing 316-8210-100
1-1/4" gear - 50.80mm housing 316-8212-100
1-1/2" gear - 57.15mm housing 316-8215-100
1-3/4" gear - 63.50mm housing 316-8217-100
2" gear - 69.85mm housing 316-8220-100
2-1/4" gear - 76.20mm housing 316-8222-100
2-1/2" gear - 82.55mm housing 316-8225-100
2-3/4" gear - 82.55mm housing 316-8227-100
3" gear - 82.55mm housing 316-8230-100
If porting is required please specify port type and size
Port end coversitem description part number
20 Port end cover (suit 75 and 76) 316-3120-100
Piggy back port end cover (suit 75 and 76) 316-5027-213
Integral gear setsitem description part number
14 1" gear set - SAE 'C' 14 tooth 1.25" dia 316-2910-250
1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2912-250
1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2915-250
1-1/2" gear set - SAE 'C' keyed 1.25" dia 316-2915-750
1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2917-250
1-3/4" gear set - SAE 'C' keyed 1.25" dia 316-2917-750
2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2920-250
2" gear set - SAE 'C' keyed 1.25" dia 316-2920-750
2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2922-250
2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2925-250
2-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2927-250
3" gear set - SAE 'C' 14 tooth 1.25" dia 316-2930-250
3" gear set - SAE 'C' keyed 1.25" dia 316-2930-750
Page 16
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
75/76 Series Pumps & Motors
Gear setsitem description part number
19 3/4" gear set 316-2807-000
1" gear set 316-2810-000
1-1/4" gear set 316-2812-000
1-1/2" gear set 316-2815-000
1-3/4" gear set 316-2817-000
2" gear set 316-2820-000
2-1/4" gear set 316-2822-000
2-1/2" gear set 316-2825-000
2-3/4" gear set 316-2827-000
3" gear set 316-2830-000
Page 17
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
P300 Series Cast Iron Gear Pumps & Motors
Pumpsmodel gear size
P 315 1/2" - 2"
P 330 1/2" - 2"
Additional section 1/2” - 2”
P 350 3/4" - 2.1/2"
Additional section 3/4” - 2.1/2”
P 365 3/4" - 2.1/2"
Motorsmodel gear size
M 315 1/2" - 2"
M 330 1/2" - 2"
Additional section 1/2” - 2”
M 350 3/4" - 2.1/2"
Additional section 3/4” - 2.1/2”
M 365 3/4" - 2.1/2"
Modificationsspecial modifications 315 330 350 365
Add-A-Pump - - POA POA
Manual two speed motor valve - - - POA
Hydraulic two speed motor valve - - - POA
Integral shaft (one-piece) - POA POA POA
All prices exclude GST.
Page 18
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
315 -1
Code Type
P Pump
M Motor
Unit
Code Type
A Single unit
B Tandem unit
L Unit w/ extended studs
Shaft End Cover
Code Description
193 Pump, CW, SAE 2 bolt ‘A’
196 Pump, CW, SAE 2 bolt ‘B’
293 Pump, CCW, SAE 2 bolt ‘A’
296 Pump, CCW, SAE 2 bolt ‘B’
993 Motor, 1/4” NPT drain, SAE 2 bolt ‘A’
996 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
Port End Cover
Code Description
BI Unported
** Ported port end cover, specify port type & location
Gear Housing
Code Description
AB05 1/2” unported gear housing pump
AB07 3/4” unported gear housing pump
AB10 1” unported gear housing pump
AB12 1-1/4” unported gear housing pump
AB15 1-1/2” unported gear housing pump
AB17 1-3/4” unported gear housing pump
AB20 2” unported gear housing pump
EB05 1/2” unported gear housing motor
EB07 3/4” unported gear housing motor
EB10 1” unported gear housing motor
EB12 1-1/4” unported gear housing motor
EB15 1-1/2” unported gear housing motor
EB17 1-3/4” unported gear housing motor
EB20 2” unported gear housing motor
Shaft Type
Code Description
-97 SAE ‘A’ keyed 0.62” dia.
-96 SAE ‘A’ 9 tooth spline 0.62” dia.
-66 SAE ‘B’ keyed 0.88” dia.
-65 SAE ‘B’ tooth spline 0.88” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
** Ported bearing carrier, specify port types & location
For multiple units repeat if necessary
315 Series Pumps & Motors
How to specify
Page 19
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
330 Series Pumps & Motors
For multiple units repeat if necessary
Code Type
P Pump
M Motor
330 -1
Unit
Code Type
CA Single unit
CB Tandem unit
CL Unit w/ extended studs
Shaft End Cover
Code Description
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
497 Pump, CW, SAE 2 bolt ‘B’
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
597 Pump, CCW, SAE 2 bolt ‘B’
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’
1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’
1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’
Port End Cover
Code Description
BI Unported port end cover (pump)
BA Unported port end cover (motor)
** Ported port end cover, specify port type & location
Gear Housing
Code Description
AB05 1/2” unported gear housing pump
AB07 3/4” unported gear housing pump
AB10 1” unported gear housing pump
AB12 1-1/4” unported gear housing pump
AB15 1-1/2” unported gear housing pump
AB17 1-3/4” unported gear housing pump
AB20 2” unported gear housing pump
EB05 1/2” unported gear housing motor
EB07 3/4” unported gear housing motor
EB10 1” unported gear housing motor
EB12 1-1/4” unported gear housing motor
EB15 1-1/2” unported gear housing motor
EB17 1-3/4” unported gear housing motor
EB20 2” unported gear housing motor
Shaft Type
Code Description
-7 SAE ‘C’ tooth spline 1.25” dia.
-25 SAE ‘B’ 13 tooth spline 0.88” dia.
-30 SAE ‘B’ keyed 0.88” dia.
-43 SAE ‘BB’ keyed 1.00” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
How to specify
Page 20
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
350 Series Pumps & Motors
For multiple units repeat if necessary
350 -1
Code Type
P Pump
M Motor
Unit
Code Type
CA Single unit
CB Tandem unit
CL Unit w/ extended studs
Shaft End Cover
Code Description
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
497 Pump, CW, SAE 2 bolt ‘B’
498 Pump, CW, SAE 2 bolt ‘C’
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
597 Pump, CCW, SAE 2 bolt ‘B’
598 Pump, CCW, SAE 2 bolt ‘C’
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’
1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’
1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’
1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’
1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’
Port End Cover
Code Description
BI Unported
IB Unported port end cover (CCW pump)
BA Unported port end cover (motor)
** Ported port end cover, specify port type & location
Gear Housing
Code Description
AB05 1/2” unported gear housing pump
AB07 3/4” unported gear housing pump
AB10 1” unported gear housing pump
AB12 1-1/4” unported gear housing pump
AB15 1-1/2” unported gear housing pump
AB17 1-3/4” unported gear housing pump
AB20 2” unported gear housing pump
AB22 2-1/4” unported gear housing pump
AB25 2-1/2” unported gear housing pump
EB10 1” unported gear housing motor
EB12 1-1/4” unported gear housing motor
EB15 1-1/2” unported gear housing motor
EB17 1-3/4” unported gear housing motor
EB20 2” unported gear housing motor
EB22 2-1/4” unported gear housing motor
EB25 2-1/2” unported gear housing motor
Shaft Type
Code Description
-7 SAE ‘C’ 14 tooth spline 1.25” dia.
-11 SAE ‘C’ 13 keyed 1.25” dia.
-25 SAE ‘B’ 13 tooth spline 0.88” dia.
-43 SAE ‘BB’ keyed 1.00” dia.
-98 SAE ‘BB’ 15 tooth spline 1.00” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
How to specify
Page 21
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
365 Series Pumps & Motors
365 -1
Code Type
P Pump
M Motor
Unit
Code Type
CA Single unit
CB Tandem unit
CL Unit w/ extended studs
Shaft End Cover
Code Description
442 Pump, CW, SAE 4 bolt ‘B’
478 Pump, CW, SAE 4 bolt ‘C’
497 Pump, CW, SAE 2 bolt ‘B’
498 Pump, CW, SAE 2 bolt ‘C’
542 Pump, CCW, SAE 4 bolt ‘B’
578 Pump, CCW, SAE 4 bolt ‘C’
597 Pump, CCW, SAE 2 bolt ‘B’
598 Pump, CCW, SAE 2 bolt ‘C’
842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’
878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’
897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’
898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’
Port End Cover
Code Description
BI Unported port end cover(CW Pump)
IB Unported port end cover (CCW pump)
BA Unported port end cover (motor)
** Ported port end cover, specify port type & location
Gear Housing
Code Description
AB07 3/4” unported gear housing pump
AB10 1” unported gear housing pump
AB12 1-1/4” unported gear housing pump
AB15 1-1/2” unported gear housing pump
AB17 1-3/4” unported gear housing pump
AB20 2” unported gear housing pump
AB22 2-1/4” unported gear housing pump
AB25 2-1/2” unported gear housing pump
EB12 1-1/4” unported gear housing motor
EB15 1-1/2” unported gear housing motor
EB17 1-3/4” unported gear housing motor
EB20 2” unported gear housing motor
EB22 2-1/4” unported gear housing motor
EB25 2-1/2” unported gear housing motor
Shaft Type
Code Description
-7 SAE ‘C’ 14 tooth spline 1.25” dia.
-11 SAE ‘C’ 13 keyed 1.25” dia.
Connecting Shaft
Code Type
-1 Connecting shaft / multiple units only
Bearing Carrier
Code Description
C Clockwise
D Counter clockwise
** Ported bearing carrier, specify port types & location
For multiple units repeat if necessaryHow to specify
Page 22
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
315 Series
item description
8 Integral Gear Set
9 Gasket Seals
10 Dowel Pins
11 Gear Housing
12 Bearing Carrier
13 Connecting Shaft
14 Gear Set
15 Port End Cover
16 Cap Screws (single units)
Studs (multiple units)
17 Washers
18 Nuts (multiple units)
item description
1 Shaft Seal (pump)
Shaft Seal (motor)
2 Shaft End Cover
3 Check Valves (motor)
4 Bushings
5 Back up Seals
6 Channel Seals
7 Thrust Plates (pump)
Thrust Plate (motor)
Page 23
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
item description part number quantity
1 Shaft seal (pump) 391-2883-151 1
Shaft seal (motor) 391-2883-156 1
2 Shaft end cover (pump) available in 2 bolt SAE ‘A’ or ‘B’ 326-5029-20X specify mounting type
1
Shaft end cover (motor) available in 2 bolt SAE ‘A’ or ‘B’ 326-5029-40X specify mounting type
1
3 Check valves (motor only) 391-3681-001 2
4 Bushings (per gear section) 391-0482-195 4
5 Back up seals (pump) per gear section 391-2883-169 2
6 Channel seals (pump) per gear section 391-2883-168 2
5 Back up seals (motor) per gear section 391-2881-995 2
7 End channel seals (motor) per gear section 391-2881-996 4
Side channel seals (motor) per gear section 391-2881-997 4
8 Thrust plates (pump) per gear section 391-2185-063 2
Thrust plates (motor) per gear section 391-2185-070 2
9 Integral gear set 326-29XX-XXX specify gear width and shaft type
1
10 Gasket seals (pump) per gear section 391-2881-968 2
Gasket seals (motor) per gear section 391-2881-429 2
11 Dowel pins (per gear section) 391-2082-071 4
12 Gear housing (pump) 326-81XX-100 specify housing width
1
Gear housing (motor) 326-82XX-100 specify housing width
1
13 Bearing carrier 326-7XXX-XXX specify porting required
1
14 Connecting shaft 326-1133-001 1
15 Gear set 326-28XX-000 specify gear width
1
16 Port end cover 326-30XX-XXX specify porting required
1
17 Cap screws (single units) 391-1401-XXX specify length, in inches
4
Studs (multiple units) 391-1426-XXX specify length, in inches
4
18 Washers 391-3782-132 4
19 Nuts 391-1451-051 4
315 Series Pumps & Motors
Page 24
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
315 Series Pumps & Motors
Shaft end coversitem description part number
2 SAE 'B' 2 bolt (pump only) 326-5029-203
SAE 'A' 2 bolt (pump only) 326-5029-204
SAE 'B' 2 bolt (motor only) 326-5029-403
SAE 'A' 2 bolt (motor only) 326-5029-404
Gear housingitem description part number
11 1/2" gear - 22.75mm housing 326-8105-100
3/4" gear - 29.10mm housing 326-8107-100
1" gear - 35.45mm housing 326-8110-100
1-1/4" gear - 41.80mm housing 326-8112-100
1-1/2" gear - 48.15mm housing 326-8115-100
1-3/4" gear - 54.50mm housing 326-8117-100
2" gear - 60.85mm housing 326-8120-100
1/2" gear - 22.75mm housing (motor only) 326-8205-100
3/4" gear - 29.10mm housing (motor only) 326-8207-100
1" gear - 35.45mm housing (motor only) 326-8210-100
1-1/4" gear - 41.80mm housing (motor only) 326-8212-100
1-1/2" gear - 48.15mm housing (motor only) 326-8215-100
1-3/4" gear - 54.50mm housing (motor only) 326-8217-100
2" gear - 60.85mm housing (motor only) 326-8220-100
If porting is required please specify port type and size
Port end coversitem description part number
15 Port end cover no ports 326-3000-100
Port end cover - motor side ports 326-3020-100
Port end cover - large pad pump 326-3030-095
Port end cover - pump side ports 326-3030-100
If porting is required please specify port type and size
Bearing carriersitem description part number
12 Bearing carrier single and combined - large pad 326-7100-098
Bearing carrier single outlet 326-7100-100
Bearing carrier dual outlet 326-7300-100
If porting is required please specify port type and size
Page 25
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
315 Series Pumps & Motors
Integral gear setsitem description part number
8 1/2" gear set - SAE 'A' 9 tooth 5/8" dia 326-2905-420
1/2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2905-430
1/2" gear set - SAE 'B' Keyed 7/8" dia 326-2905-930
3/4" gear set - SAE 'A' 9 tooth 5/8" dia 326-2907-420
3/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2907-430
3/4" gear set - SAE 'A' Keyed 5/8" dia 329-2907-920
3/4" gear set - SAE 'B' Keyed 7/8" dia 326-2907-930
1" gear set - SAE 'A' 9 tooth 5/8" dia 326-2910-420
1" gear set - SAE 'B' 13 tooth 7/8" dia 326-2910-430
1" gear set - SAE 'B' Keyed 7/8" dia 326-2910-930
1-1/4" gear set - SAE 'A' 9 tooth 5/8" dia 326-2912-420
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2912-430
1-1/4" gear set - SAE 'B' Keyed 7/8" dia 326-2912-930
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2915-430
1-1/2" gear set - SAE 'B' Keyed 7/8" dia 326-2915-930
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2917-430
1-3/4" gear set - SAE 'B' Keyed 7/8" dia 326-2917-930
2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2920-430
2" gear set - SAE 'B' Keyed 7/8" dia 326-2920-930
Gear setsitem description part number
14 1/2" gear set 326-2805-000
3/4" gear set 326-2807-000
1" gear set 326-2810-000
1-1/4" gear set 326-2812-000
1-1/2" gear set 326-2815-000
1-3/4" gear set 326-2817-000
2" gear set 326-2820-000
Page 26
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
330 Series
item description
9 Thrust Plates (pump)
Thrust Plates (motor)
10 Integral Gear Set
11 Gasket Seals (pump)
Gasket Seals (motor)
12 Dowel Pins
13 Gear Housing (pump)
Gear Housing (motor)
14 Bearing Carrier
15 Connecting Shaft
16 Gear Set
17 Port End Cover
18 Cap Screws (single units)
Studs (multiple units)
19 Washers
20 Nuts
21 Continental Shaft
22 Spacer
23 Retaining Ring
24 Seal Retainer (motors and c-shafts)
item description
1 Snap Ring
2 Outboard Bearing
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Shaft End Cover
5 Check Valve Assembly (motor)
Check Plug (pumps only)
6 Bushings
7 Back Up Seals
8 Channel Seals
Continental shaft only
Page 27
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
330 Series Pumps & Motors
item description part number quantity
1 Snap ring 391-2686-063 1
2 Outboard bearing 391-0381-040 1
3 Shaft seal (integral pump) 391-2883-058 1
Shaft seal (c-shaft pump) 391-2883-107 1
Shaft seal (integral motor) 391-2883-119 1
Shaft seal (c-shaft motor) 391-2883-126 1
4 Shaft end cover 324-50XX-XXX specify mounting type
1
5 Check valve assembly (motor) 391-3681-001 2
Check plug (pumps only 391-2286-004 1
6 Bushings (per gear section) 391-0482-306 4
7 Back up seals (pump) per gear section 391-2883-167 2
8 Channel seals (pump) per gear section 391-2883-166 2
9 Back up seals (motor) per gear section 391-2881-929 2
10 End channel seals (motor) per gear section 391-2881-930 4
Side channel seals (motor) per gear section 391-2881-931 4
11 Thrust plates (pump) per gear section 391-2185-056 2
Thrust plates (motor) per gear section 391-2185-065 2
12 Integral gear set 324-29XX-XXX specify gear width and shaft type
1
13 Gasket seals (pump) per gear section 391-2884-050 2
Gasket seals (motor) per gear section 391-2884-076 2
14 Dowel pins (per gear section) 391-2082-032 4
15 Gear housing (pump) 324-81XX-100 specify housing width
1
Gear housing (motor) 324-82XX-100 specify housing width
1
16 Bearing carrier 324-7XXX-XXX specify porting required
1
17 Connecting shaft 324-1133-001 1
18 Gear set 324-28XX-000 specify gear width
1
19 Port end cover 324-30XX-XXX specify porting required
1
20 Cap screws (single units) 391-1401-XXX specify length, in inches
4
Studs (multiple units) 391-1425-XXX specify length, in inches
4
21 Washers 391-3784-028 4
22 Nuts 391-1451-076 4
23 Continental shaft 324-XXXX-XXX specify shaft type
1
24 Spacer 312-0100-002 1
25 Retaining ring 391-2685-011 1
26 Seal retainer (motors and c-shafts) 391-3381-040 1
Page 28
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
330 Series Pumps & Motors
Continental shaftitem description part number
21 SAE 'BB' keyed 1" dia 324-1500-400
SAE 'C' 14 tooth 1.25" dia 324-1000-500
SAE 'B' 13 tooth 7/8" dia 324-1000-300
SAE 'B' keyed 7/8" dia 324-1500-300
SAE 'C' keyed 1.25" dia 324-1500-502
8 tooth 36mm Sq DIN 5462 324-1000-002
Connecting shaftitem description part number
15 Connecting shaft 330-315 (for Piggyback housing) 324-1133-004
Integral gear setsitem description part number
10 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2907-230
3/4" gear set - SAE 'BB" keyed 1" dia 324-2907-740
1" gear set - SAE 'B' 13 tooth 7/8" dia 324-2910-230
1" gear set - SAE 'BB' 15 tooth 1" dia 324-2910-240
1" gear set - SAE 'BB' keyed 1" dia 324-2910-740
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2912-230
1-1/4" gear set - SAE 'BB' 15 tooth 1" dia 324-2912-240
1-1/4" gear set - SAE 'BB' keyed 1" dia 324-2912-740
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 324-2915-230
1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 324-2915-240
1-1/2" gear set - SAE 'BB' keyed 1" dia 324-2915-740
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2917-230
1-3/4" gear set - SAE 'BB' 15 tooth 1" dia 324-2917-240
1-3/4" gear set - SAE 'BB' keyed 1" dia 324-2917-740
2" gear set - SAE 'B' 13 tooth 7/8" dia 324-2920-230
2" gear set - SAE 'BB' 15 tooth 1" dia 324-2920-240
2" gear set - SAE 'BB' keyed 1" dia 324-2920-740
Gear setsitem description part number
16 1/2" gear set 324-2805-000
3/4" gear set 324-2807-000
1" gear set 324-2810-000
1-1/4" gear set 324-2812-000
1-1/2" gear set 324-2815-000
1-3/4" gear set 324-2817-000
2" gear set 324-2820-000
Page 29
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
330 Series Pumps & Motors
Shaft end coversitem description part number
4 SAE 'B' 2 bolt (pump only) 324-5023-201
SAE 'B' 2 bolt (motor only) 324-5023-301
SAE 'B' 4 bolt (pump only) 324-5033-201
SAE 'C' 4 bolt (pump only) 324-5033-202
"ZF" 4 bolt 80mm pilot 324-5033-205
SAE 'B' 4 bolt (motor only) 324-5033-301
SAE ‘C' 4 bolt (motor only) 324-5033-302
Gear housingitem description part number
13 1/2" gear - 25.40mm housing 324-8105-100
3/4" gear - 31.75mm housing 324-8107-100
1" gear - 38.10mm housing 324-8110-100
1-1/4" gear - 44.45mm housing 324-8112-100
1-1/2" gear - 50.80mm housing 324-8115-100
1-3/4" gear - 57.15mm housing 324-8117-100
2" gear - 63.50mm housing 324-8120-100
1/2" gear - 25.40mm housing (motor only) 324-8205-100
3/4" gear - 31.75mm housing (motor only) 324-8207-100
1" gear - 38.10mm housing (motor only) 324-8210-100
1-1/4" gear - 44.45mm housing (motor only) 324-8212-100
1-1/2" gear - 50.80mm housing (motor only) 324-8215-100
1-3/4" gear - 57.15mm housing (motor only) 324-8217-100
2" gear - 63.50mm housing (motor only) 324-8220-100
Port end coversitem description part number
17 Port end cover no ports 324-3000-100
Port end cover - pump large pad 324-3010-095
Port end cover - pump side ports 324-3010-100
Port end cover - priority / relief combination 324-3018-100
Port end cover - motor side ports 324-3020-100
Port end cover - pump rear ports 324-3031-100
Piggyback housing 330-315 CW 324-3050-100
Piggyback housing 330-315 CCW 324-3060-100
If porting is required please specify port type and size
Bearing carriersitem description part number
14 Bearing carrier single and combined 324-7100-100
Bearing carrier - motor only 324-7200-100
Bearing carrier dual outlet - large pad inlet 324-7300-099
Bearing carrier dual outlet 324-7300-100
If porting is required please specify port type and size
Page 30
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
350 Series
item description
1 Snap Ring
2 Outboard Bearing
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Shaft End Cover
5 Check Valve Assembly (motor)
Check Plug (pumps only)
6 Bushings
7 Back Up Seals
8 Channel Seals
Continental shaft only
item description
9 Thrust Plates (pump)
Thrust Plates (motor)
10 Integral Gear Set
11 Gasket Seals (pump)
Gasket Seals (motor)
12 Dowel Pins
13 Gear Housing (pump)
Gear Housing (motor)
14 Bearing Carrier
15 Connecting Shaft
16 Gear Set
17 Port End Cover
18 Cap Screws (single units)
18 Studs (multiple units)
19 Washers
20 Nuts
21 Continental Shaft
22 Spacer
23 Retaining Ring
24 Seal Retainer (motors and c-shafts)
Page 31
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
350 Series Pumps & Motors
item description part number quantity
1 Snap ring 391-2686-065 1
2 Outboard bearing 391-0381-077 1
3 Shaft seal (integral pump) 391-2883-103 1
Shaft seal (c-shaft pump) 391-2883-133 1
Shaft seal (integral motor) 391-2883-115 1
Shaft seal (c-shaft motor) 391-2883-186 1
4 Shaft end cover 323-50XX-XXX specify mounting type
1
5 Check valve assembly (motor) 391-3681-001 2
Check plug (pumps only) 391-2286-004 1
6 Bushings (per gear section) 391-0482-308 4
7 Back up seals (pump) per gear section 391-2882-139 2
8 Channel seals (pump) per gear section 391-2882-140 2
Back up seals (motor) per gear section 391-2885-075 2
9 End channel seals (motor) per gear section 391-2885-074 4
Side channel seals (motor) per gear section 391-2885-073 4
10 Thrust plates (pump) per gear section 391-2185-057 2
Thrust Plates (motor) per gear section 391-2185-068 2
11 Integral gear set 323-29XX-XXX specify gear width and shaft type
1
12 Gasket seals (pump) per gear section 391-2884-074 2
Gasket seals (motor) per gear section 391-2884-021 2
13 Dowel pins (per gear section 391-2082-032 4
14 Gear housing (pump) 323-81XX-100 specify housing width
1
Gear housing (motor) 323-82XX-100 specify housing width
1
15 Bearing carrier 323-7XXX-XXX specify porting required
1
16 Connecting shaft 323-1133-001 1
17 Gear set 323-28XX-000 specify gear width
1
18 Port end cover 323-30XX-XXX specify porting required
1
19 Cap screws (single units) 391-1401-XXX specify length, in inches
4
Studs (multiple units) 391-1425-XXX specify length, in inches
4
20 Washers 391-3784-028 4
21 Nuts 391-1451-076 4
22 Continental shaft 323-XXXX-XXX specify shaft type
1
23 Spacer 312-0100-002 1
24 Retaining ring 391-2685-011 1
25 Seal retainer (motors and c-shafts) 391-3381-040 1
Page 32
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
350 Series Pumps & Motors Continental shaft
item description part number
21 SAE 'BB' 15 tooth 1" dia 323-1000-401
8 tooth 36mm Sq DIN 5462 323-1000-002
SAE 'B' 13 tooth 7/8" dia 323-1000-300
SAE 'C' keyed 1.25" dia 323-1500-500
SAE 'C' keyed 1.25" dia etra long 323-1500-502
SAE 'C' 14 tooth 1.25" dia 323-1000-501
Connecting shaft 15 Connecting shaft A spline (suits Add-A-Pump port end covers) 323-1133-002
Connecting shaft B spline (suits Add-A-Pump port end covers) 323-1133-003
Connecting shaft (for piggyback housing) 323-1133-006
Integral gear sets10 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2907-230
3/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2907-250
1" gear set - SAE 'C' 14 tooth 1.25" dia 323-2910-250
1" gear set - SAE 'C' keyed 1.25" dia 323-2910-750
1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2912-230
1-1/4" gear set - SAE 'BB' 15 tooth 1" dia 323-2912-240
1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2912-250
1-1/4" gear set - SAE 'C' keyed 1.25" dia 323-2912-750
1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2915-230
1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 323-2915-240
1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2915-250
1-1/2" gear set - SAE 'C' keyed 1.25" dia 323-2915-750
1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2917-230
1-3/4" gear set - SAE 'BB' 15 tooth 1" dia 323-2917-240
1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2917-250
1-3/4" gear set - SAE 'C' keyed 1.25" dia 323-2917-750
2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2920-230
2" gear set - SAE 'BB' 15 tooth 1" dia 323-2920-240
2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2920-250
2" gear set - SAE 'C' keyed 1.25" dia 323-2920-750
2-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2922-230
2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2922-250
2-1/4" gear set - SAE 'C' keyed 1.25" dia 323-2922-750
2-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2925-230
2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2925-250
2-1/2" gear set - SAE 'C' keyed 1.25" dia 323-2925-750
Gear sets16 1/2" gear set 323-2805-000
3/4" gear set 323-2807-000
1" gear set 323-2810-000
1-1/4" gear set 323-2812-000
1-1/2" gear set 323-2815-000
1-3/4" gear set 323-2817-000
2" gear set 323-2820-000
2-1/4" gear set 323-2822-000
2-1/2" gear set 323-2825-000
Page 33
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
350 Series Pumps & Motors
Shaft end coversitem description part number
4 SAE 'B' 2 bolt 323-5023-201
SAE 'C' 2 bolt 323-5023-202
SAE 'B' 4 bolt 323-5033-201
SAE 'C' 4 bolt 323-5033-202
"ZF" 4 bolt 80mm pilot 323-5033-205
Gear housingitem description part number
13 1/2" gear - 25.40mm housing 323-8105-100
3/4" gear - 31.75mm housing 323-8107-100
1" gear - 38.10mm housing 323-8110-100
1-1/4" gear - 44.45mm housing 323-8112-100
1-1/2" gear - 50.80mm housing 323-8115-100
1-3/4" gear - 57.15mm housing 323-8117-100
2" gear - 63.50mm housing 323-8120-100
2-1/4" gear - 69.85mm housing 323-8122-100
2-1/2" gear - 76.20mm housing 323-8125-100
1" gear - 38.10mm housing (motor only) 323-8210-100
1-1/4" gear - 44.45mm housing (motor only) 323-8212-100
1-1/2" gear - 50.80mm housing (motor only) 323-8215-100
1-3/4" gear - 57.15mm housing (motor only) 323-8217-100
2" gear - 63.50mm housing (motor only) 323-8220-100
2-1/4" gear - 69.85mm housing (motor only) 323-8222-100
2-1/2" gear - 76.20mm housing (motor only) 323-8225-100
Port end coversitem description part number
17 Port end cover - no ports 323-3000-100
Port end cover - pump side ports 323-3010-100
Port end cover - motor side ports 323-3020-100
Piggyback housing 350-315 CW 323-3050-100
Add-A-Pump port end cover SAE 'A' CW 323-3054-099
Add-A-Pump port end cover SAE 'B' CW 323-3054-100
Piggyback housing 350-315 CCW 323-3060-100
Add-A-Pump port end cover SAE 'A' CCW 323-3064-099
Add-A-Pump port end cover SAE 'B' CCW 323-3064-100
If porting is required please specify port type and size If porting is required please specify port type and size
Bearing carriersitem description part number
14 Bearing carrier single and combined 323-7100-100
Bearing carrier - motor only 323-7200-100
Bearing carrier dual outlet 323-7300-100
If porting is required please specify port type and size
Page 34
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
item description
1 Snap Ring
2 Outboard Bearing
3 Shaft Seal (integral pump)
Shaft Seal (c-shaft pump)
Shaft Seal (integral motor)
Shaft Seal (c-shaft motor)
4 Shaft End Cover
5 Check Valve Assembly (motor)
Check Plug (pumps only)
6 Bushings
7 Back Up Seals
8 Channel seals
365 Series
Continental shaft only
item description
9 Thrust Plates (pump)
Thrust Plates (motor)
10 Integral Gear Set
11 Gasket Seals (pump)
Gasket Seals (motor)
12 Dowel Pins (pump)
Dowel Pins (motor)
13 Gear Housing (pump)
Gear Housing (motor)
14 Bearing Carrier
15 Connecting Shaft
16 Gear Set
17 Port End Cover
18 Cap Screws (single units)
Studs (multiple units)
19 Washers
20 Nuts
21 Continental Shaft
22 Spacer
23 Retaining Ring
24 Seal Retainer (motors and c-shafts)
Page 35
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
365 Series Pumps & Motors
item description part number quantity
1 Retaining ring 391-2686-025 1
2 Outboard bearing 391-0381-078 1
3 Shaft seal (pump) 391-2883-052 1
Shaft seal (motor) 391-2883-094 1
4 Shaft end cover 322-50XX-XXX specify mounting type
1
5 Check valve assembly (motor) 391-3681-001 2
6 Bushings (per gear section) 391-0482-307 4
7 Back up seals (pump) per gear section 391-2883-177 2
8 Channel seals (pump) per gear section 391-2883-176 2
9 Back up seals (motor) per gear section 391-2885-071 2
10 End channel seals (motor) per gear section 391-2885-070 4
Side channel seals (motor) per gear section 391-2885-069 4
11 Thrust plates (pump) per gear section 391-2185-055 2
Thrust plates (motor) per gear section 391-2185-060 2
12 Integral gear set 322-29XX-XXX specify gear width and shaft type
1
13 Gasket seals (pump) per gear section 391-2884-052 2
Gasket seals (motor) per gear section 391-2884-023 2
14 Dowel pins (pump) per gear section 391-2082-062 8
Dowel pins (motor) per gear section 391-2082-069 4
15 Gear housing (pump) 322-81XX-100 specify housing width
1
Gear housing (motor) 322-82XX-100 specify housing width
1
16 Bearing carrier 322-7XXX-XXX specify porting required
1
17 Connecting shaft 322-1133-001 1
18 Gear set 322-28XX-000 specify gear width
1
19 Port end cover 322-30XX-XXX specify porting required
1
20 Cap screws (single units) 391-1401-XXX specify length, in inches
4
Studs (multiple units) 391-1425-XXX specify length, in inches
4
21 Washers (pump) 391-3782-028 4
Washers (motor) 391-3782-114 4
22 Nuts (pump) 391-1451-076 4
Nuts (motor) 391-1451-086 4
23 Continental shaft 322-XXXX-XXX specify shaft type
1
24 Spacer 391-3782-158 1
25 Retaining ring 391-2685-029 1
26 Seal retainer (motors and c-shafts) 391-2584-119 1
Page 36
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Continental shaftitem description part number
21 SAE 'C' 14 tooth 1.25" dia 322-1000-501
SAE 'C' keyed 1.25" dia 322-1500-500
Connecting shaftitem description part number
15 Connecting shaft 365-330 (for piggyback housing) 322-1133-002
Connecting shaft A spline (suits Add-A-Pump port end covers) 322-1133-003
Connecting shaft B spline (suits Add-A-Pump port end covers) 322-1133-004
Connecting shaft BB spline (suits Add-A-Pump port end covers) 322-1133-009
Integral gear setsitem description part number
10 3/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2907-250
3/4" gear set - SAE 'C' keyed 1.25" dia 322-2907-750
1" gear set - SAE 'C' 14 tooth 1.25" dia 322-2910-250
1" gear set - SAE 'C' keyed 1.25" dia 322-2910-750
1-1/4" gear set - 21 tooth 1-3/8" dia 322-2912-204
1-1/4" gear Set - SAE 'C' 14 tooth 1.25" dia 322-2912-250
1-1/4" gear set - SAE 'C' keyed 1.25" dia 322-2912-750
1-1/2" gear set - 21 tooth 1-3/8" dia 322-2915-204
1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2915-250
1-1/2" gear set - SAE 'C' keyed 1.25" dia 322-2915-750
1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2917-250
1-3/4" gear set - SAE 'C' keyed 1.25" dia 322-2917-750
2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2920-250
2" gear set - SAE 'C' keyed 1.25" dia 322-2920-750
2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2922-250
2-1/4" gear set - SAE 'C' keyed 1.25" dia 322-2922-750
2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2925-250
2-1/2" gear set - SAE 'C' keyed 1.25" dia 322-2925-750
Gear setsitem description part number
16 3/4" gear set 322-2807-000
1" gear set 322-2810-000
1-1/4" gear set 322-2812-000
1-1/2" gear set 322-2815-000
1-3/4" gear set 322-2817-000
2" gear set 322-2820-000
2-1/4" gear set 322-2822-000
2-1/2" gear set 322-2825-000
365 Series Pumps & Motors
Page 37
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Shaft end coversitem description part number
4 SAE 'B' 2 bolt - pump only 322-5023-201
SAE 'C' 2 bolt - pump only 322-5023-202
SAE 'B' 2 bolt - motor only 322-5023-301
SAE 'C' 2 bolt - motor only 322-5023-302
SAE 'B' 4 bolt - pump only 322-5033-201
SAE 'C' 4 bolt - pump only 322-5033-202
SAE 'B' 4 bolt - motor only 322-5033-301
SAE 'C' 4 bolt - motor only 322-5033-302
Gear housingitem description part number
13 3/4" gear - 31.75mm housing 322-8107-100
1" gear - 38.10mm housing 322-8110-100
1-1/4" gear - 44.45mm housing 322-8112-100
1-1/2" gear - 50.80mm housing 322-8115-100
1-3/4" gear - 57.15mm housing 322-8117-100
2" gear - 63.50mm housing 322-8120-100
2-1/4" gear - 69.85mm housing 322-8122-100
2-1/2" gear - 76.20mm housing 322-8125-100
1-1/4" gear - 44.45mm housing (motor only) 322-8212-100
1-1/2" gear - 50.80mm housing (motor only) 322-8215-100
1-3/4" gear - 57.15mm housing (motor only) 322-8217-100
2" gear - 63.50mm housing (motor only) 322-8220-100
2-1/4" gear - 69.85mm housing (motor only) 322-8222-100
2-1/2" gear - 76.20mm housing (motor only) 322-8225-100
Port end coversitem description part number
17 Port end cover no ports (motor only) 322-3000-099
Port end cover no ports 322-3000-100
Port end cover - pump side ports 322-3010-100
Port end cover - motor side ports 322-3020-100
Piggyback housing 365-350 CW 322-3050-100
Add-A-Pump port end cover SAE 'A' CW 322-3054-099
Add-A-Pump port end cover SAE 'B' CW 322-3054-100
Piggyback housing 365-350 CCW 322-3060-100
Add-A-Pump port end cover SAE 'A' CCW 322-3064-099
Add-A-Pump port end cover SAE 'B' CCW 322-3064-100
If porting is required please specify port type and size
Bearing carriers14 Bearing carrier single outlet - large pad 322-7100-099
Bearing carrier single and combined 322-7100-100
Bearing carrier half cross cored 322-7100-101
Bearing carrier - motor only 322-7200-100
Bearing carrier dual outlet 322-7300-100
Bearing carrier dual outlet - large pad 322-7300-101If porting is required please specify port type and size
365 Series Pumps & Motors
Page 38
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Standard Seal Kits, Soft Seals only for Commercial Pumps & Motors
series single # tandem # triple #
P20 P20SK1 P20SK2 P20SK3
P30/31 P30SK1 P30SK2 P30SK3
P50/51 P50SK1 P50SK2 P50SK3
P75/76 P75SK1 P75SK2 P75SK3
M20 M20SK1 M20SK2 M20SK3
M30/31 M30SK1 M30SK2 M30SK3
M50/51 M50SK1 M50SK2 M50SK3
M75/76 M75SK1 M75SK2 M75SK3
P315 P315SK1 P315SK2 P315SK3
P330 P330SK1 P330SK2 P330SK3
P350 P350SK1 P350SK2 P350SK3
P365 P365SK1 P365SK2 P365SK3
M315 M315SK1 M315SK2 M315SK3
M330 M330SK1 M330SK2 M330SK3
M350 M350SK1 M350SK2 M350SK3
M365 M365SK1 M365SK2 N/A
Page 39
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Heavy Duty Aluminium Pumps & Motors500 Series
High PerformanceHigh EfficiencyHigh Pressure Operation
PGP 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures.They are produced in three frame sizes, with displacements ranging from 0.8 to 70 cc/rev. A wide variety of standard options are available to meet specific application requirements.
Up to 275 bar continuous operation
High strength materials and large journal diameters provide low bearing loads for high pressure operation.
Low noise
PGP 505 and 517, 13 tooth gear profile, PGP 511, 12 tooth gear profile and optimised flow metering provide reduced pressure pulsation and exceptionally quiet operation.
Application flexibility
International mounts and connection, integrated valve capabilities and common inlet multiple pump configurations provide unmatched design and application versatility.
Characteristics
Mounting SAE, rectangular, thru-bolt
Shaft SAE splined, keyed, tapered, parallel standard, tang drive (on request)
Speed 500-4000 rpm
Axial / Radial Load Units subject to axial, radial load must be specified with an outboard bearing
Fluids Mineral oils, fire resistant fluids - water-oil emulsion 60/40, HFB - water-glycol, HFD - phosphate-esters, HFD
Temperature Fluid range of operating temperature 15-80°C
Fluid Viscosity Range of operating viscosity 8 to 100mm2/s max
Filtration According to ISO 4406 CI. 16/13
Multiple Pumps Available in two, three and four sections Max shaft load must conform to limitation shown in catalogue Max load is calculated by adding the torque values for each pumping sections that will be simultaneously loaded.
Page 40
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
SAE ‘A’ 2 bolt mount5/8” keyed shaft
disp dimension inlet outlet part number stock part number stock
cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type
4 42.6 86.7 7/8” 3/4” 3500 250 3349116034 P 3349116034A W
6 44.1 89.8 1-1/16” 7/8” 3500 250 3349116035 P 3349116035A W
8 45.7 93.0 1-1/16” 7/8” 3500 250 3349116036 P 3349116036A W
10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349116030 P 3349116030A W
11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349116031 P 3349116031A W
14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349116032 P 3349116032A W
16 52.0 105.6 1-5/16” 1-1/16” 3400 250 3349116033 P 3349116033A W
19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349116037 P 3349116037A W
23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349116038 P 3349116038A W
27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349116039 P 3349116039A W
Seal Kit 8611-023-00N
All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion
Page 41
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
SAE ‘A’ 2 bolt mount3/4” keyed shaft
disp dimension inlet outlet part number stock part number stock
cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type
4 42.6 86.7 7/8” 3/4” 3500 250 3349116042 P 3349116042A W
6 44.1 89.8 1-1/16” 7/8” 3500 250 3349116043 P 3349116043A W
8 45.7 93.0 1-1/16” 7/8” 3500 250 3349116044 P 3349116044A W
10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349116045 P 3349116045A W
11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349116046 P 3349116046A W
14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349116047 P 3349116047A W
16 52.0 105.6 1-5/16” 1-1/16” 3400 250 3349116048 P 3349116048A W
19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349116049 P 3349116049A W
23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349116050 P 3349116050A W
27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349116051 P 3349116051A W
Seal Kit 8611-023-Q1N
All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion
Page 42
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
SAE ‘A’ 2 bolt mount5/8” 9 tooth spline
disp dimension inlet outlet part number stock part number stock
cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type
4 42.6 86.7 7/8” 3/4” 3500 250 3349111578 P 3349111578A W
6 44.1 89.8 1-1/16” 7/8” 3500 250 3319111579 P 3349111579A W
8 45.7 93 1-1/16” 7/8” 3500 250 3349111580 P 3349111580A W
10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349111581 P 3349111581A W
11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349111582 P 3349111582A W
14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349111583 P 3349111583A W
16 52 105.6 1-5/16” 1-1/16” 3400 250 3349111584 P 3349111584A W
19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349111585 P 3349111585A W
23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349111586 P 3349111586A W
27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349111587 P 3349111587A W
31 63.8 129.2 1-5/8” 1-5/16” 2100 160 3349111588 P 3349111588A W
33 65.4 132.3 1-5/8” 1-5/16” 2000 150 3349111589 P 3349111589A W
Seal Kit 8611-023-00N
All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion
Page 43
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
SAE ‘A’ 2 bolt mount3/4” 11 tooth spline
disp dimension inlet outlet part number stock part number stock
cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type
4 42.6 86.7 7/8” 3/4” 3500 250 3349111602 P 3349111602A W
6 44.1 89.8 1-1/16” 7/8” 3500 250 3319111603 P 3349111603A W
8 45.7 93 1-1/16” 7/8” 3500 250 3349111604 P 3349111604A W
10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349111605 P 3349111605A W
11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349111606 P 3349111606A W
14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349111607 P 3349111607A W
16 52 105.6 1-5/16” 1-1/16” 3400 250 3349111608 P 3349111608A W
19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349111609 P 3349111609A W
23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349111610 P 3349111610A W
27 60.7 122.9 1-5/8” 1-5/16” 2300 190 3349111611 P 3349111611A W
31 63.8 129.2 1-5/8” 1-5/16” 2100 165 3349111612 P 3349111612A W
33 65.4 132.3 1-5/8” 1-5/16” 2000 155 3349111613 P 3349111613A W
Seal Kit 8611-023-Q1N
All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion
Page 44
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
DIN group 2, 4 bolt mount1:8 taper shaft
disp dimension inlet outlet part number stock part number stock
cc/rev A C “G” BSP “G” BSP max RPM max bar clockwise type CCW type
4 42.6 86.7 3/4” 1/2” 3500 250 3349111711 P 3349111711A W
6 44.1 89.8 3/4” 1/2” 3500 250 3319111712 P 3349111712A W
8 45.7 93 3/4” 1/2” 3500 250 3349111713 P 3349111713A W
10 47.3 96.1 3/4” 1/2” 3500 250 3349116005 P 3349116005A W
11 48.1 97.7 3/4” 1/2” 3500 250 3349111714 P 3349111714A W
14 50.4 102.4 3/4” 1/2” 2800 250 3349111715 P 3349111715A W
16 52 105.6 3/4” 1/2” 2400 250 3349111716 P 3349111716A W
19 54.4 110.3 3/4” 1/2” 2000 250 3349116006 P 3349116006A W
23 57.5 116.6 3/4” 1/2” 1700 225 3349111718 P 3349111718A W
27 60.7 122.9 1” 3/4” 2350 190 3349111719 P 3349111719A W
31 63.8 129.2 1” 3/4” 2000 165 3349111720 P 3349111720A W
33 65.4 132.3 1” 3/4” 1900 155 3349111721 P 3349111721A W
Seal Kit 8611-023-00N
All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion
Page 45
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
PGP511 Series Aluminium Gear Pumps
Tandem bolt on unitsdisp dimension mm inlet port outlet port pressure part number stock
cc/rev “L” mm port code port code max bar type
4 47 7/8" UNF 3/4" UNF 210 3911832142 P
6 50.1 1-1/16" UNF 7/8" UNF 210 3911832143 P
8 53.3 1-1/16" UNF 7/8" UNF 210 3911832144 P
10 56.5 1-5/16" UNF 1-1/16" UNF 210 3911832145 P
11 58 1-5/16" UNF 1-1/16" UNF 210 3911832146 P
14 62.8 1-5/16" UNF 1-1/16" UNF 210 3911832147 P
16 65.9 1-5/16" UNF 1-1/16" UNF 210 3911832148 P
19 70.6 1-5/8" UNF 1-5/16" UNF 210 3911832149 P
23 76.9 1-5/8" UNF 1-5/16” UNF 210 3911832150 P
27 83.2 1-5/8" UNF 1-5/16" UNF 210 3911832151 P
31 89.5 1-5/8" UNF 1-5/16” UNF 210 3911832152 P
33 92.6 1-5/8" UNF 1-5/16” UNF 210 3911832153 P
Units are run clockwise and are easily converted in the field. .
Accessories
Stud material, nuts and washers will be required to complete your assemblies.
description UOM part number stock
M10 Nut ea 3911475167 P
Washer ea 3913782231 P
M10 Stud x 1 meter, grade 8 ea 8112015 P
Page 46
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
505 Series
PG 505 B 1 B 1
Code Type
P Pump
Unit
Code Pump Motor
A Single Standard motor w/o checks
B Multiple standard motor two checks
C - standard motor one a/c check
Displacement
Code cc/rev
0030 3.0
0040 4.0
0060 6.0
0080 8.0
0100 10.0
0120 12.0
Shaft Type
Code Shaft
A1 9T, 16/32DP, 32L. SAE “A” spline
J1 Dia. 12.7, 3.2 key, 38L parallel
K1 Dia. 15.88, 4.0 key, no thread, 32L SAE “A”, parallel
Q2 Dia. 14.25, 3.0 key, M10 x 1 thread, 1.8 taper
Shaft Seal
Code Shaft Seal
X No Seal
N NBR
M Double NBR
Port Options
Code Description
E3E2 3/4-14 BSP thread1/2-14 BSP threadfor 3cc to 12cc
J7J5 20mm-40 dia - M615mm-35 dia - M6for 3cc to 12cc
Rotation
Code Rotation
C Clockwise
A Counter-clockwise
B Bi directional
Flange
Code Flange
D2 56 x 73 x dia 30 pilot rectangular
H1 82.5-050.8 SAE “AA” 2 bolt flange
H2 106.4-082.55 SAE “A” 2 bolt flange
How to specify
Page 47
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
511 Series
PG 511 B 1 B 1
Code Type
P Pump
M Motor
Unit
Code Pump Motor
A Single unit Standard motor w/o checks
B Multiple unit
standard motor two checks
C - standard motor one a/c check
Displacement
Code cc/rev
0040 4.0
0060 6.0
0080 8.0
0100 10.0
0110 11.0
0140 14.0
0160 16.0
0190 19.0
0230 23.0
0270 27.0
0310 31.0
0330 33.0
Shaft Type
Code Shaft
A1 9T, 16/32DP, 32L. SAE “A” spline
C1 11T, 16/32DP, 38.2L, SAE 19-4 spline
F1 9T, B17 x 14, 23L DIN 5482 Spline
K1 015.88, 4.0 key, no thread, 32L SAE “A”, parallel
L6 019.05, 4.8 key, no thread, 32L SAE 19-1 parallel
S1 017.0, 7.7L, 3.0 key, M12 x 1.5. 1:5 taper
S2 0.16.65, 12.0L, 3.2 key, M12 x 1.5, 1:8 taper
S4 016.65, 12.0L, 4.0 key, M12 x 15, 1.8 taper
B1 10T, 17.0mm spline
Shaft Seal
Code Shaft Seal
X No seal
N NBR
M Double NBR
Port Options
Code Description
E5E3 3/4 - 14 BSP thread1/2 - 14 BSP threadonly from 4cc to 11cc
E6E5 1 - 11 BSP thread3/4 - 14 BSP thread only from 14cc to 23cc
D4D3 7/8 - 14 UNF thread3/4 - 16 UNF thread for 4cc only
D5D4 1-1/16 - 12 UNF thread7/8 - 14 UNF thread for 6cc to 8cc only
D6D5 1-5/16 - 12 UNF thread1-1/16 - 12 UNF thread for 10cc to 16cc only
D7D6 1-5/8 - 12 UNF thread1-5/16 - 12 UNF threadfor 23cc to 33cc
Code Port Options (motor)
E3E3 1/2 - 14 BSP thread1/2 - 14 BSP threadonly from 4cc to 11cc
E5E5 3/4 - 14 BSP thread3/4 - 14 BSP threadonly from 14cc to 33cc
D4D4 7/8 - 14 UNF thread7/8 - 14 UNF threadonly from 4cc to 11cc
D6D6 1-5/16 - 12 UNF thread1-5/16 - 12 UNF threadonly from 14cc to 33cc
Rotation
Code rotation
C Clockwise
A Counter-clockwise
B Bi direc-tional
Flange
Code Flange
D3 71.4 x 96.0-036.47 rectangular
D4 72.0 x 100.0-080 rectangular
H2 106.4-082.55 SAE “A” 2 bolt flange
H3 146.1-0101.06 SAE “B” 2 bolt flange
Q2 60.0 x 60.0-0.50 w/seal ‘o’ ring thru bolt flange top RHS
Q3 60.0 x 60.0-0.50 w/seal ‘o’ ring thru bolt flange top LHS
Made to order
Indent item
How to specify
Page 48
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
517 Series
PG 517 B 1 B 1
Code Type
P Pump
Unit
Code Pump Motor
A Single unit Standard motor w/o checks
B Multiple unit
standard motor two checks
Displacement
Code cc/rev
0040 4.0
0060 6.0
0080 8.0
0100 10.0
0110 11.0
0140 14.0
0160 16.0
0190 19.0
0230 23.0
0270 27.0
0310 31.0
0330 33.0
Shaft Type
Code Shaft
D1 13T, 16/32DP, 42.2L. SAE “B” spline
M1 Dia 22.2, 6.3 key, 42.2L SAE “B” parallel
M2 Dia 25.4, 6.3 key, 46L SAE “BB” parallel
T1 Dia. 21.59, 11.2L, 4.0 key, M14 x 1.5, 1:8 taper
Shaft Seal
Code Shaft Seal
X No Seal
N NBR
M Double NBR
Port Options
Code Description
E6E5 1 - 11 BSP thread3/4 - 14 BSP thread only from 14cc to 19cc
E7E6 1-1/4 - 11 BSP thread1-11 BSP threadonly from 23cc to 38cc
E8E6 1-1/2 - 11 BSP thread1-11 BSP threadonly from 44cc to 70cc
Rotation
Code Rotation
C Clockwise
A Counter clockwise
B Bi directional
Flange
Code Flange
D7 98.4 x 128.2 x 50.77 pilot rectangular
H3 146.1-0101.06 SAE “B” 2 bolt flange
How to specify
Available in Truck Pump Section
Indent item
Page 49
Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277
CommercialHydraulics
Truck Pumps Cross Reference
The following table contains truck pumps that are either obsolete or no longer supported in Australia with a ‘new’ replacement part number. Check actual size and porting configuration.
current part make new part make description (PG517)
HP16-85A-2S7 Gresen 3339112378 Commercial PGP517A0280AD1H3NB1B1E6E5
HP16-85C-2S7 Gresen 3339111616 Commercial PGP517A0280CD1H3NB1B1E6E5
HP16-100A-2S7 Gresen 3339112379 Commercial PGP517A0330AD1H3NB1B1E6E5
HP16-100C-2S7 Gresen 3339111617 Commercial PGP517A0330CD1H3NB1B1E6E5
HP16-115A-2S7 Gresen 3339112380 Commercial PGP517A0380AD1H3NB1B1E6E5
HP16-115C-2S7 Gresen 3339111618 Commercial PGP517A0380CD1H3NB1B1E6E5
HP16-150A-2S7 Gresen 3339112381 Commercial PGP517A0440AD1H3NB1B1E6E5
HP16-150C-2S7 Gresen 3339111619 Commercial PGP517A0440CD1H3NB1B1E6E5
HP16-180A-2S7 Gresen 3339112418 Commercial PGP517A0520AD1H3NE8E6B1B1
HP16-180C-2S7 Gresen 3339111685 Commercial PGP517A0520CD1H3NE8E6B1B1
HP16-200A-2S7 Gresen 3339112396 Commercial PGP517A0700AD1H3NE8E6B1B1
HP16-200C-2S7 Gresen 3339111592 Commercial PGP517A0700CD1H3NE8E6B1B1
HP16-250A-2S7 Gresen 3339112396 Commercial PGP517A0700AD1H3NE8E6B1B1
HP16-250C-2S7 Gresen 3339111592 Commercial PGP517A0700CD1H3NE8E6B1B1
CM10084
current part make new part make description (PG517, 620, 640)
Bi- Rotational Bi-Rotational
5014006 (BR8) Bezares 3349113911 Commercial 8 CC 8T SPL DIN 5462
507206 (BR12) Bezares 3349113912 Commercial 12 CC 8T SPL DIN 5462
506306 (BR16) Bezares 3349113913 Commercial 16 CC 8T SPL DIN 5462
506406 (BR20) Bezares 3349113914 Commercial 19 CC 8T SPL DIN 5462
506506 (BR25) Bezares 7029113914 Commercial 29 CC 8T SPL DIN 5462
506606BZ (BR30) Bezares 7029113915 Commercial 36 CC 8T SPL DIN 5462
506706 (BR40) Bezares 7029113916 Commercial 41 CC 8T SPL DIN 5462
507606 (BR51) Bezares 7029113917 Commercial 46 CC 8T SPL DIN 5462
5010206 (BR61) Bezares 7049113912 Commercial 60 CC 8T SPL DIN 5462
5010306 (BR71) Bezares 7049113913 Commercial 70 CC 8T SPL DIN 5462
5010406 (BR81) Bezares 7049113914 Commercial 80 CC 8T SPL DIN 5462
5010506 (BR100) Bezares 7049113915 Commercial 100 CC 8T SPL DIN 5462
All above unit specifications, size and port orientation will vary from original part number.
To replace HP16 Gresen units, clover leaf adapter CM10084 is required with Commercial pump.
Page 50
18 Tarlton Crescent, Perth International Airport WA 6105
Tel: (08) 9473 7277 Fax: (08) 9473 7298
Email: pd@pressuredynamics.com.au
www.pressuredynamics.com.au
Pressure Dynamics is the largest privately owned Hydro-technical company in the west.
We are a vibrant and resourceful company leading the industry in hydraulic technology
applications. There is no quick fix at Pressure Dynamics, we are painstaking in all that we
do, from concept, through to design, manufacture and installation.
Our objective, quite simply, is to be the best in our field and achieve our goal without
shedding any standards in our service.
ENGINEERINGCONSULTANCY DESIGN MANUFACTURING TOTAL PACKAGE
Innovate design, superior project management, vast experience in remote site installation,
stringent quality control in all facets of production and design, customer and staff
training and a quality assurance certification to ISO 9001, enable Pressure Dynamics to
offer a total package of qualified and diverse skills from concept to manufacture and
installation.
SERVICEREPAIR MAINTENANCE INSTALLATION TESTING
Our Service Department provides services from overhauling componentry to on-site
troubleshooting, commissioning and installations. Our service division also offer
programmed care and maintenance packages to suit individual plants. Field testing is
supported by our fleet of fully equipped service vehicles that carry mobile test and fault
finding diagnostic equipment. As an added service, we also hire hydraulic power units
ready to operate at a minutes notice.
A phone call to Pressure Dynamics soon gets you back to full production.
SALESPRODUCT POWER UNITS CONNECTORS
Pressure Dynamics stocks an extensive range of hydraulic equipment and over the years
has become a major player in the hydraulic component market. We also represent the
world renowned Parker Hannifin products with their extensive range of hydraulics,
instrumentation fittings and valves, hoses and fittings. Our own range of small bore
hydraulic cylinders and our established range of commercial gear pumps and motors are
built to your own customised needs.
PRESSURE DYNAMICS
18 Tarlton Crescent, Perth International Airport, Western Australia, 6105
Tel: (08) 9473 7277 Fax: (08) 9473 7298
Email: pd@pressuredynamics.com.au
www.pressuredynamics.com.au
ABN: 12 072 551 967
CAT-CH-2009-01.1