The Formwork Experts.

Column formwork

System solutions for reinforced-concrete columns

Doka Column formworkFrami Xlife

Doka Column formwork KS Xlife

Framax Xlife /Alu-Framax XlifeUniversal panels

Doka Column formwork RS

Doka Column formwork Top 50

2 Column formwork

Doka column formwork Framax Xlifefrom Framax Xlife universal panels

with Universal panels 90 with Universal panels 120

H= 0.90 / 1.35 / 2.70 / 3.30 m

e.g.25 x 25 cm

max.105 x 105 cm

e.g.60 x 20 cm

max.75 x 75 cm

3 Column formwork

Alu-Framax universal panelas Column formwork

270

135

75

75

75

90

270

135

75

75

7590

270

135

75

75

7590

max. 60 x 60 cm

4 Column formwork

In practice

5 Column formwork

Doka column formwork KS

very short erection and striking times, thanks to simple unfold / refold construction

entire formwork repositioned in one piece, in one single crane lift

one system for any cross-section from 20 – 60 cm

Triangular ledges for chamfering the corners

Panel heights0.90 m / 1.20 m / 2.70 m / 3.30 m columns can be formed up to a height of 3.30 m with no joins

6 Column formwork

KS Xlife sheeting

Threaded fasteners are in the rear face – no marks left on the concrete!

7 Column formwork

Frontal triangular ledge

*bevel 15 and 20 mm

8 Column formwork

Protective plate KS top

9 Column formwork

Shifting wheel KS

10 Column formwork

Doka column formwork Frami Xlife

11 Column formwork

Column formworkwith Frami Xlife universal panels

Frami Xlife formwork pressure:80 kN/m²

H= 1.20 / 1.50 / 2.70 / 3.00 m

Universal panel 0.90m

e.g. 20 x 60 cm column

max. column 65 x 65 cm

Universal panel 0.75m

The Universal panel 0.90m lets you form column cross-sections of up to 80 x 80 cm

12 Column formwork

On the site

13 Column formwork

Doka Column formwork RS

for high demands on surface 150 kN/m2 fresh concrete pressure diameter from 30 to 60 cm (custom sizes on

request) panel heights

0.25 m / 0.50 m / 1.00 m / 3.00 m

Short forming-time integrated connectors quick connector for Panel struts centring function

14 Column formwork

Combining with Framax Xlife

15 Column formwork

Steel walingWS 10 Top 50up to 70 x 70 cm

Steel walingWU 12up to 120 x 120 cm

Steel walingsand corner connecting plates

16 Column formwork

Terminal Tower Linz, Austria

17 Column formwork

Geometry timbers for special geometries Column connecting plates 6/8

Columns of each geometry of standard parts

18 Column formwork

HLAG Asten

19 Column formwork

Ladder system XS

safe vertical access routes with integral ladder cages, to meet the most stringent safety rules

can be pre-assembled at ground level

can also be retro-attached

low transport volume

for Column formwork platform 150/90cm

20 Column formwork

XS-connector column formwork

Ladder cageXS 1.00 m

Ladder cage exit XS

XS-connector FX / Alu-FX

XS-connector KS

XS-connector RS

Ladder cage XS shown stacked for transportSituation during assembly

Situation during lifting

XS-connectorwall formwork

2.30 m 4.40 m

Overview of system components

21 Column formwork

ALMI Leonding, Austria

22 Column formwork