HANDS FREE COLOR VIDEO DOOR PHONE

VDP C-31

Presentation Overview

• Product Overview• Components• Device Familiarization• Installation• Wiring• Operation• Safety Notice• Accessories• Technical Specifications

Product Overview

• Specially designed for villa• Maximizes safety by seeing the visitor before opening the

door• 2.5 inch TFT LCD color screen• Hands free function• Multi monitor compatibility

Components

Device FamiliarizationMicrophone

TFT LCD screen

AC power cable

User controls

Loud speaker

Indicators

Back View – Indoor Unit

RJ11 socketDoor lock terminals

Bottom View – Indoor Unit

User controls

Outdoor Camera Unit

Camera metal frameCamera inside metal

frame

Outdoor Camera Unit

Camera

Alert buttonLoud

speaker

Microphone

LED

RJ11 socket

Door lock terminals

Plastic frame of camera unit

Screw holes

Installation – Indoor Unit

• Install the monitor in a proper position where it is easy for use, at a proper height, avoiding direct sun shine

• Install the wire and cable correctly and then hook up the monitor

Installation – Outdoor Unit• Place the camera where it is away from direct sunshine and

effects of poor weather. Choose an appropriate height to get a better eye level view

• Dig holes through wall to arrange for premises distribution of the cable, door lock wire and other parts

• Fix the plastic frame on the wall with screws and place the camera main body into the frame. Install the metal frame onto the main body with screws tightened firmly

Installation Schematic

Wiring

• Main line – camera to monitor.• Connect with the crystal plugs into the related camera and

monitor sockets. The door lock lead wire goes from camera to door lock.

Wiring cont…

• Extend to multi monitor use, if required according to the following diagram

Wiring for multi monitor transmission• At the back of each monitor there are six terminals marked

1-6. Connect the same terminals is each monitor, at most three monitors in one system.

• When the transmission range is up to 20m between two monitors, use better multi core coaxial cable. Door lock wire should be PVC flexible copper wire or twisted wire.

• For inter phone function, connect the terminal marked 6.

Operation

Visitor’s call• The visitor presses the call button and the indoor monitor

chimes at once. The housekeeper presses the talk button to talk to the visitor. If no one answers the monitor within 60 seconds, the system goes back to standby mode.

Unlock• During the talk, the door lock can be released by pressing the

unlock button on the monitor.

Monitor• On standby, press the monitor button to see the view at the

door. To return to standby, press the monitor button again.

Operation cont…

Interphone function• This functions except for the monitor mode. Press the

interphone button and all monitors connected chime. For interphone function among monitors, press the talk button.

• Image quality, ring volume and call volume can be adjusted using respective buttons on the monitor.

Safety Notice

• To prevent electric shock, do not disassemble the device without the help of a technician. Contact your local dealer or factory for services in case of malfunction.

• Fix all parts firmly. Properly ventilated and low humidity location is preferable for the device.

• Clean the device with soft cotton cloth. Erosive chemical or water is prohibited.

• Do not press multiple buttons simultaneously.• Ask for technician for replacement or repair, in case of any

problems. Use proper wires for connections.

Accessories

The following parts come with the device. It is not advisable to use them with any other device.

• Monitor – camera main line wire• Expansion tube and tapping screws• Wall mounting plate• Power adaptor DC 15V~500mA• User manual

Technical Specifications

Contact Us

• BioEnable Technologies Pvt. Ltd.2nd Floor, The Avenue, Pune-Solapur Road, Hadapsar,landmark: Opp. Mega Center Pune 411028, MH, India

• Tollfree: 1800-209-2131 (only from India)• International Sales: +91-9326170554 or +91-9373336478• Others call : +91-20- 26810214• Fax: +91-20-30225587• email: sales@bioenabletech.com (Sales Worldwide)

support@bioenabletech.com (Support Worldwide)accounts@bioenabletech.com (Accounts Worldwide)

• For more information about VDP, visit

video-door-phone.bioenabletech.com