Post on 01-Apr-2015
CHAPTER-20
Entropy and Second Law of Thermodynamics
CHAPTER-20 Entropy and Second Law of Thermodynamics
1. Topics to be covered:2. Reversible processes3. Entropy4. The Carnot engine5. Refrigerators6. Real engines
Ch 20-2 Irreversible Process and Entropy
Irreversible Process: One way process If the irreversible process proceed in a closed system in
a reverse way, we will wonder about it. A melted piece of ice freezes by itself. Although from energy conservation, the process can proceed in the reverse path i.e.heat released in in the environment in melting ice can be recovered back into ice piece to solidify it . Energy conservation does not prohibit the process to proceed one way or the reverse way.
Which parameter the one ay direction of the process?. Entropy set the direction of irreversible process and
irreversible process proceed through that path in which entropy of the system always increases
Entropy Postulate: If an irreversible process occurs in a closed system, the entropy S of the system always increases
Change in entropy: (The arrow of time)-time reversal impossible due to entropy violation
Entropy definition: Two methods:
i) Using system’s temperature and heat loss/gain by the system
ii) By counting the ways in which the atoms or molecules of the system can be arranged
iii) Entropy S: state property like P,V,T, S
iv) Change in entropy S=Q/Tv) S=Sf-Si=f
i Q/T
Ch 20-2 Irreversible Process and Entropy
Free Expansion of an ideal gas- Irreversible Process:
An ideal gas expands from i to f state in an adiabatic process such that no work is done on or by the gas and no change in the internal energy of the system i.e. Ti=Tf; piVi=pfVf ;W=Eint=0
S=Sf-Si=fi Q/T
Integral from i to f cannot be solved for an irreversible process but can be solved for a reversible process.
Since S is state variable (Sif)rev= (Sif)irrevSirrev= Srev= Sf-Si= f
i Q/T (irreversible)To find the entropy change for an
irreversible process in a closed system, replace that process with any reversible process that connects that connects same initial and final states and calculate its change in entropy
Ch 20-3 Change in Entropy
Ch 20-3 Change in Entropy
Calculation of Entropy in Reversible Process
In free expansion Ti=Tf, i.e. isothermal process then reversible isothermal expansion process can be used to calculate change in entropy in free expansion. Then
Srev= Sf-Si= fi Q/T= 1/Tf
iQ (isothermal)
An ideal gas confined in a insulated cylinder fitted with a piston . The cylinder rest on a thermal reservoir maintained at temp T.
Gas is expanded isothermally from I to f state and heat is absorbed by the gas from the reservoir.S is positive because Q is positive
S= Sf-Si= Q/T
Ch 20-3,4 Change in Entropy, Second Law of Thermodynamics
Entropy as a State functionS= Sf-Si= Q/T but
Eint=Q-W or Q = Eint+W ; W=pdV; Eint= nCVT
Then S= Q/T= if (nCVdT/T) +
if (pdV/T)
=nCV if (dT/T) +
if (nRdV/V)
S =nCV ln(Tf/Ti) + nR ln(Vf/Vi) Second Law of Thermodynamics In a closed system entropy remains constant for
reversible process but it increases for irreversible process.
Entropy never decreasesChange in Entropy of a reversible compression
of an ideal gas in a closed system reservoir + gas
Ssys= Sgas + Sres =-Q/T+Q/T=0
A Carnot engine is a device that extracts heat QH from a reservoir at temperature TH, does useful work W and rejects heat QL to a reservoir at temperature TL.
On a p-V diagram Carnot cycle ( executed by a cylinder fitted with a piston and in thermal contact with one of two reservoirs at temperatures TH and TL.) is bound by two isotherms and two adiabatic.
Ch 20-5 Entropy in Real World: Engines
Ch 20-5 Entropy in Real World: Engines
Heat QH is absorbed at Temperature TH and heat QL is rejected at TL.
Work: According to first law of thermodynamics, Eint=Q-W, Eint=0
and W=Q=QH-QL Entropy Change S:In Carnot cycle S=0S=0= QH/TH-QL/TL
QH/TH=QL/TL
Ch 20-5 Entropy in Real World: Engines
Thermal Efficiency of an Engine :
= work we get /energy we pay for = W/ QH
For a Carnot engine W=QH-QL
Then Carnot engine efficiency C is
C : QH-QL/QH
C=1-QL/QH=1- TL/TH
There is no perfect engine i.e. QL=0
Ch 20-6 Entropy in Real World: Refrigerators
A refrigerator is an engine that uses work to transfer heat from a
low-temperature reservoir to a high-temperature reservoir
as the engine repeats a set series of thermodynamic processes.
I
Refrigerators
) )
n the household refrigerator the work is provided by the
compressor and it transfers heat from the food storage area
low-temperature reservoir to the surrounding air
high-temperature reservoir . In an air conditioner
the low-temperature reservoir is the room that is being cooled.
The high-temperature reservoir is the outdoor air. An ideal
refrigerator is one in which all the processes are reversible
One such refrigerator is a Carnot engine that operates
in the reverse order:
This is known as a Carnot refrigerator.
and
no energy is lost to friction or turbulence.
a d c b a→ → → →
Ch 20-6 Entropy in Real World: Refrigerators
A Refrigerator: A device that uses work to transfer energy QL from a low temperature reservoir at temperature TL to a high-temperature reservoir at temperature TH
Coefficient of performance of a refrigerator K
K= what we want /what we pay for K=QL/W but W=QH-QL K =QL/W=QL/QH-QLK =QL/QH= TL/TH-1K=TL/(TH-TL)There is no perfect refrigerator i.e.
W=0
Suggested problems Chapter 20