CERTIFICATEOF REGISTRATION

This is to certify that the management system of:

SCP ScienceMain Site: 21800 Clark Graham Avenue,Baie d'Urfé, Quebec, H9X 4B6, Canada See appendix for additional sites and additional site scopes

has been registered by Intertek as conforming to the requirements of:

ISO 9001:2015The management system is applicable to:

Distribution, design and fabrication of analytical instrumentation and accessories, analytical supplies and glassware, injection molded parts, inorganic and organic (oil based) chemical standards and chemical reagents.

Certificate Number:4737-5

Initial Certification Date:20 July 2005

Date of Certification Decision:31 July 2020

Issuing Date:31 July 2020

Valid Until:18 August 2023

Calin MoldoveanPresident, Business Assurance

Intertek Testing Services NA, Inc. 900 Chelmsford Street, LowellMA 01851, USA

In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.

Page 1 of 2

APPENDIX TOCERTIFICATE OFREGISTRATION

This appendix identifies the locations covered by the management system of:

SCP ScienceThis appendix is linked to the Main Certificate # 4737-5 and cannot be shown nor reproduced without it.

SCP Science

12 Avenue de Québec, Bat. Iberis SILIC 642,Courtaboeuf, 91965, France

Business management, distribution and after sales service of analytical instrumentation and accessories, analytical supplies and glassware, injection molded parts, inorganic and organic (oil based) chemical standards and chemical reagents.

SCP Science

Alte Marktoberdorfer Straße 14,Marktoberdorf, 87616, Germany

Business management and sales of analytical instrumentation and accessories, analytical supplies and glassware, injection molded parts, inorganic and organic (oil based) chemical standards and chemical reagents.

In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.

Page 2 of 2