Post on 15-Jul-2020
Flexure Bending Test Devices PFE.m 50 kN/Standard 3 & 4 Points
The test sample is placed on the supports of the bottom of the bending test device and after testing bending strength of 3 or 4 points is performed.
- Capacity50 kN- Made of steel- Roller support width 50 mm- Span: 10 to 100 mm (standard)- Temperature range: -70ºC hasta 180ºC
PFE.m/AR3R55-OR10-Ni Milled radii R3 y R5 upper radius10mm
Nickel
PFE.m/AR2R5-OR3-cgr With centering system
* The upper support have individual radios(choose one among R3mm or R5mm)
** The lower supports each have 2 radios, are reversible with different radius on each side support (choose one of the two combinations (R2mm and R4mm) or (R3mm and R5mm)
Testing Devices 3-point bending are supplied including 1 Set of 3 supports the radius chosen (see below) Testing Devices 3-point bending are supplied including 1 Set of 4 supports the radius chosen (see below)
Pag 1 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
PFE.m/AR2R5-OR3-cgr
Centering gearWith support with 2 radios R2-R5Upper radius anvil R3
PFE.m/A25PFE.m/A24
PFE.m/F2
PFE.m/A35
Pag 2 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE.m/AXR2-AR3-OR2-OR3-cgr
Exchangeable Rollers D3 + D5
Upper milled radii R2 and R3
PFE.m/B300-AX50H80 -S9112
PFE.m/BK220-CR5-OR30
Pag 3 of 10 All specifications subject to change without notice
Extra long bar 300 mm
Upper anvils and long lower supports for testing bending up to 180 °
PFE.m/4P
4 Point Bending Test Device
Centered system with gear
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE.m/AX50-SL
With lateral clamping bars to stiffen the support system and make samples bent to 180 °
PFE.m/ASTM D 2344
Rolling table
For testing of composite
materials (Composites)
------------
Small specimens Length
PFE.m/Bo200-CR5-Am22 Upper
part 2 milled support of R5
Male adapter of 22
Pag 4 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE/CL20x50- OR02x80-R05x80- FV-PWT-cgr
PFE.m/AR2R5-ITH2-cgr
To attach external Extensometers
To attach external Extensometers
Mobile support for ceramicss
PFE.m/Bo200-CWN8-WDF
Upper for Bending 4 Points
Mobile support for ceramicss
Extra movable adapter
PFE.m/CWN8-ITH2-cgr
Pag 5 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE.m/AXPFE.m/AR5R3PFE.m/oR2-15.9
PFE.m/CR5 PFE.m/CXPFE.m/oX-15.9
PFE.m/CL10 PFE.m/CM6
PFE.m/CWR5 PFE.m/CWX12.7
PFE.m/CWL12 PFE.m/CWN8
PFE.m/D10
Pag 6 of 10 All specifications subject to change without notice TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
SINGLE PARTS
PFE.m/B220-Af159 bar
220 mm long Adapter 15.9
PFE.m/B220-Af159-cgr
Bar with centering system
Basic lower barr
PFE.m/BK300-Af159
Bar 300mm with centering
gear system
PFE.m/Bo200-Af159
200mm top bar for bending test device at 4 points with female adapter 15.9
Basic lower bar
Pag 7 of 10 All specifications subject to change without noticeTECHLAB SYSTEMS, S.L.
Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA
www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
SupportsPFE.m/AR2R4
Milled hardened black
PFE.m/AX
Support with 2 supports roller 3..15 mm diameter and 51.5 mm in height ..62.9
PFE.m/D10 PFE.m/D6 PFE.m/D4
Rollers
PFE.m/CR5
Milled
Pag 8 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE.m/CL10-Ni
10mm diameter rotating roll plated
PFE.m/CWN8
Movable Roller 8mm diameterFree rotating on flat surface Keep with O-Ring
For ceramic samples test
PFE.m/oR2 Radius R2
Milled hardened
PFE.m/FX
Support for interchangeable
support rollers with diameters
between 3-10 mm
PFE.m/o Upper single fin
Pag 9 of 10 All specifications subject to change without noticeTECHLAB SYSTEMS, S.L.
Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA
www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series
PFE.m/oR10H80
R10 milledHeight 80mm
Hardened
PFE.m/oR02-FV
R0.2mm for 160° bending
PFE.m/oR50
Radius R50mm
PFE.m/SL220
Side bar for 180° bending
PFE.m/iTH2
Holder for external extensometer
Pag 10 of 10 All specifications subject to change without notice
TECHLAB SYSTEMS, S.L. Head Office: Txatxamendi 10, Pol. 110 – 20100 Lezo – SPAIN
US Office: 1549 Ardmore Ave. –Itasca, Illinois 60143 USA www.metrotec.es
Bending Test Devices Medium Capacity PFE.m Series