Adding telephony toIBM Connections ?

Social Connections IV - 30/11/2012 - Amsterdam

Calling Sametime

Introduction

What is SUT Lite

Sametime and Connections

SUT Lite and Connections

“What can I do with Sametime Unified Telefony

Lite within IBM Connections”

Introduction

What is SUT Lite

Sametime and Connections

SUT Lite and Connections

What is SUT Lite

Certified equipment

http://www-10.lotus.com/ldd/stwiki.nsf/dx/

Sametime_Unified_Telephony_Lite_Interoperability_Testing_Pro

gram

Architecture

Limitations

• Only point-to-point calls

• Only Sametime Connect Client is

supported

• Users cannot dial into a Sametime

meeting

• NAT traversal is not supported.

SUT vs. SUT Lite

Introduction

What is SUT Lite

Sametime and Connections

SUT Lite and Connections

Awareness

Using Sametime Proxy Server

Server Based

Using the Sametime Connect Client

Client Based

Client requirements

• Sametime Client 8.0.2 +• When using SSL:

• Sametime Connect 8.5 +• Lotus Notes 8.5.1 +

• Users must be logged into Sametime from the same machine as where they access Connections and with the same account

Check the Client

Server configuration

• Open the file profiles-config.xml• Locate the sametimeAwareness

element• Set enabled to true

• Restart Profiles

The Result

Introduction

What is SUT Lite

Sametime and Connections

SUT Lite and Connections

Start a call

Calling

“What can I do with Sametime Unified Telefony

Lite within IBM Connections”

?

Introduction

What is SUT Lite

Sametime and Connections

SUT Lite and Connections

Configuring SUT Lite

Configure the server

• Install the SUT Lite license• Enable SUT Lite on the Media

Manager from the System Console

• Optional: disable encryption

Enable users

• Enable SIP Trunk capability on the Media Manager policy

Dialplan

Dial String SIP endpoint Phone/Device

3118255517X Sametime Sametime Softphone

316XXXXXXXX FreePBX PBX (soft)phone

@mcu.silverside.nl MCU Media Server Video Conferencing

Configure the SIP Proxy

• In the System Console open the configuration of the SIP Proxies and Registrars of the Media Server

• Open the Proxy Administration

Define the rules

Configure the conditions

Define the rules

Set the destination

Define the rules

Example:

Route all calls where the SIP Request URI starts with “+316” to 192.168.0.214 via TCP

Define the rules

Example:

Route all incoming calls from 192.168.0.214 to the Media Manager via TCP.

?