Post on 30-Nov-2018
Bulk Melters BM 200with Gear Pump
− EASY-pneumatic −
Parts List P/N 397176J− English −
NORDSON ENGINEERING GMBH � LÜNEBURG � GERMANY
� 2006 Nordson CorporationAll right reserved
BM 200 EASY GPIssued 02/06
COV_EN_397176J
NoteAfter approx. December 2003, this parts list applies to the entire series.
Order numberP/N = Order number for Nordson products
NoticeThis is a Nordson Corporation publication which is protected by copyright. Original copyright date 2003.
No part of this document may be photocopied, reproduced, or translated to another language without the priorwritten consent of Nordson Corporation. The information contained in this publication is subject to change without
notice.
TrademarksAccuJet, AquaGuard, Asymtek, Automove, Autotech, Blue Box, CF, CanWorks, Century, Clean Coat, CleanSleeve, CleanSpray, Compumelt, Control Coat,Cross-Cut, Cyclo-Kinetic, Dispensejet, DispenseMate, Durafiber, Durasystem, Easy Coat, Easymove Plus, Econo-Coat, EPREG, ETI, Excel 2000, Flex-O-Coat,FlexiCoat, Flexi-Spray, Flow Sentry, Fluidmove, FoamMelt, FoamMix, Helix, Horizon, Hose Mole, Hot Shot, Hot Stitch, Isocoil, Isocore, Iso-Flo, JR, KB30, Little Squirt,Magnastatic, MEG, Meltex, MicroSet, Millenium, Mini Squirt, Moist-Cure, Mountaingate, MultiScan, Nordson, OmniScan, Opticoat, OptiMix, Package of Values,Patternview, PluraFoam, Porous Coat, PowderGrid, Powderware, Prism, Pro-Flo, ProLink, Pro-Meter, Pro-Stream, PRX, RBX, Rhino, S. design stylized, Saturn,SC5, Seal Sentry, Select Charge, Select Coat, Select Cure, Slautterback, Smart-Coat, Spray Squirt, Spraymelt, Super Squirt, Sure Coat, System Sentry, Tela-Therm,Trends, Tribomatic, UniScan, UpTime, Veritec, Versa-Coat, Versa-Screen, Versa-Spray, Walcom, Watermark, When you expect more. are registered trademarks− ® − of Nordson Corporation.
ATS, Aerocharge, Auto-Flo, AutoScan, BetterBook, Chameleon, CanNeck, Check Mate, Colormax, Control Weave, Controlled Fiberization, Coolwave, CPX, Dry Cure,E-Nordson, EasyClean, Eclipse, Equi=Bead, Fill Sentry, Fillmaster, Gluie, Heli-Flow, Ink-Dot, Iso-Flex, Kinetix, Lacquer Cure, Maxima, MicroFin, Minimeter, Multifil,Origin, PermaFlo, PluraMix, Powder Pilot, Powercure, Primarc, Process Sentry, PurTech, Pulse Spray, Ready Coat, Select Series, Sensomatic, Shaftshield,SheetAire, Spectral, Spectronic, Spectrum, Summit, Sure Brand, Sure Clean, Sure Max, Swirl Coat, Tempus, Tracking Plus, Trade Plus, Universal, Vista, Web Cure,2 Rings (Design) are trademarks − � − of Nordson Corporation.
Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes, could lead to violation of the owners’ rights.
Table of Contents I
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Table of Contents
1. Notes 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Assembly Overview 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Assemblies 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switch Rod 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Support, Single 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Support, Dual 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drive, WS0370/PR 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drive, WS1500/PUS 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protection Cover, PR.. 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protection Cover, PU.. 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drum Shell (Drum Jacket), H220 22. . . . . . . . . . . . . . . . . . . . . . . . . . .
Drum Shell (Drum Jacket), H795 24. . . . . . . . . . . . . . . . . . . . . . . . . . .
Device, Drum Inserted 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Heating Punch 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finned Melting Plate 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Axial Melting Plate 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smooth Melting Plate 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Connection, NW08/16 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Connection, NW20 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hose Connection, NW32 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drum Sealing 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PR6m1 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PR12m1 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PR12m2 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PR25m2 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapter Plate, Gear Pumps PR.. 44. . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PU15/85R 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PU25/85R 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PU35/85R 50. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Pump, PU50/85R 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auto Aeration Valve 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of ContentsII
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Installation Kit 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Man. Aeration Valve 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air-relief Valve (Deaeration Valve) 60. . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Valve (for Adapter Plate) 62. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Valve (for PU-Pumps) 64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exhaust Hood 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pneumatic Compl. (Pneumatic Diagram) 68. . . . . . . . . . . . . . . . . . . .
Indication Signs 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Channel 72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable Channel 74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electric Complete (Electr. cabinet) Mounting Plate 76. . . . . . . . . . . .
Other Electrical Components 80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Kits 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Circuit Breaker Connection Designation 86. . . . . . . . . . . . . . . . . . . . .
BM 200 EASY with Gear Pump 1
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
NOTE: The valid configuration code for the delivered system isdescribed in the document index.
NOTE: Parts without a P/N are not spare parts and can not be ordered.
The electrical components are labeled in accordance with DIN 40 719,part 2. The label corresponds to the designation in the current flowdiagram and is located on or near the component.
The component designation contains information on the component (e.g. relay, fuse), including an identifying letter.
002631
Corresponding current path of wiring diagram
Designating letter (refer to table)
Page in current flow diagram
- 5 F 1
Fig. 1 Example: fuse designation
A Assemblies, subassemblies
B Converters from elect. to non-electrical quantities or vice versa
E Miscellaneous, e.g. lighting devices, heating devices
F Protective devices
H Signal devices
K Relays, conductors
M Motors
N Amplifiers, controllers
Q Power switchgears
R Resistors
S Switches, dials
T Transformers
X Terminals, plugs, sockets
Y Electrically operated mechanical devices
1. Notes
BM 200 EASY with Gear Pump2
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
1
7
3
4
2
5
10
6
8
9
11
003031
Fig. 2 Assembly overview (part 1)
2. Assembly Overview
BM 200 EASY with Gear Pump 3
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Fig. Quantity Box Code
1 394230 Frame, Nordson-Blue, complete w/o trafo 4 1 3 3394231 Frame, Nordson-Blue, complete w/ trafo 3 4 - 5
2 461058 Device heating punch inquiry 5 1 - -
3 448009 Hose support, complete single 6 1 7 1464500 Hose support, complete dual 7 1 7 2
4 788518 Drive, WS0370/PR, compl. 8 1 5 11 - 14788874 Drive, WS1500/PUS, compl. 9 1 5 50 - 53
5 788559 Protection cover, PR2-PR12, L406 10 1 5 11 - 13
788560 Protection cover, PR25-PR100, L385 5 14201780 Protection cover, PU15/85, L435 11 1 5 50201781 Protection cover, PU25-35/85, L415 5 51, 52201783 Protection cover, PU50/85, L405 5 53
6 290029 Drum shell complete, H220 12 1 - -444789 Drum shell complete, H795 13 12
13JX
729882 Drum shell complete, H795 1213
JW
7 207961 Device drum inserted 14 1 - -
8 207054 Heating punch, d512, 2SAS, complete(for Pos. 9)
15 1 - -
9 461070 Finned (High melt), melting plate, VX,complete 16 1 2 F, P201027 Axial plate, VX, complete 2 A, B, R, C729390 Smooth plate, VX, complete 2 G, U
10 464473 Hose connection fitting, NW08/16 17
1
2
4
7
7
K
1
2201694 Hose connection fitting, NW20 18
1
2
4
7
7
M
1
2460990 Hose connection fitting, NW32 19
1
2
4
7
7
L
1
211 276977 Seal, T.E.S, Model 500 20 1
212-
J-
BM 200 EASY with Gear Pump4
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
12
21
20
22
14
19
15
18
17
13
19
25
23, 24
003031
16
Fig. 3 Assembly overview (part 2)
2. Assembly Overview(contd.)
BM 200 EASY with Gear Pump 5
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Fig. Quantity Box Code
12 256015 Gear pump, PR6m1 21 1 5 11
254316 Gear pump, PR12m1 22 5 12
254247 Gear pump, PR12m2 23 5 13
254279 Gear pump, PR25m2 24 5 14
13 788552 Adapter plate, PUS/PR1.5-25, compl. 25 1 5 11 - 14
14 788611 Gear pump, PU15/85R, D25, heated 26 1 5 50
402166 Gear pump, PU25/85R, D25, heated 27 5 51
402170 Gear pump, PU35/85R, D25, heated 28 5 52
400764 Gear pump, PU50/85R, D25, heated 29 5 53
15 394229 Auto Aeration valve 30 1 2 A, B, F, G
16 394716 Installation kit 31 1 2 A, B, F, G
17 207962 Man. Aeration valve 32 1 2 R, C, P, U
18 444896 Air-relief valve 33 1 - -
19 315383 Safety valve, 100bar, MX 34 1 5 50 - 53
252753 Safety valve, 100bar, ZS/DG/PUS 35 1 5 11 - 14
20 207225
253815
Pressure sensor (refer to Other Electrical Components)
Plug 1/2UNF, L53, DD
-
-
1
-
9 D
21 460816 Exhaust hood, complete (Zubehör) 36 1 213
B, C, G, UX
729884 Exhaust hood, complete (Accessory) 213
B, C, G, UW
22 207963 Pneumatic, complete w/o cabinet 37 1 - -
- 448684 Indication sign pneumatic, complete 38 1 - -
23 203990 Cable channel, complete 39 1 - -
24 203991 Cable channel, complete 40 1 - -
25 207902 Cable channel, complete - 1 - -
- - Electric, complete 41, 42 1 - -
- - Further Electric parts 43 - 45 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump6
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
394230_050317SR
1
25
30
2 3 4 5 6 5 4 2 1 7 8 14
17
18
2627272829
31
32
33
34
35
36
37
38
39
8
7
40
41
9 − 13
16
15
19 − 21
24
23
22
Fig. 4 Frame
3. Assemblies
Frame
BM 200 EASY with Gear Pump 7
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 394230 Frame, Nordson-Blue, complete, w/o trafo 1 3 3
— 394231 Frame, Nordson-Blue, complete, w/ trafo 1 3 4 - 5
1 785618 � Plug, 70x70x3, h17 2 - -
2 429960 � Spacer 2 - -
3 461034 � Traverse, frame, A830, RAL9005 1 - -
4 255239 � Hexagon head screw, M20x120, DIN931, stainless 2 - -
5 394646 � Washer, D40, DIN125 type B 4 - -
6 259212 � Hexagon nut, M39, DIN934 4 - -
7 250031 � Allan head cap screw, M8x20, DIN912, stainless 2 - -
8 267233 � Sealing ring, R1/8 2 - -ÁÁÁÁÁÁÁÁÁÁÁÁ
9 ÁÁÁÁÁÁÁÁÁÁ
7109747 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� support, elec.cabinet BM200 ÁÁÁÁÁÁÁÁÁÁ
1 - -
ÁÁÁÁÁÁÁÁÁÁÁÁ
10 ÁÁÁÁÁÁÁÁÁÁ
255264 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� washer D5,3 DIN125 type A ÁÁÁÁÁÁÁÁÁÁ
1 - -
ÁÁÁÁÁÁÁÁÁÁÁÁ
11 ÁÁÁÁÁÁÁÁÁÁ
250019 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M5x12 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
1 - -
ÁÁÁÁÁÁÁÁÁÁÁÁ
12 ÁÁÁÁÁÁÁÁÁÁ
256853 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� washer D8,4 DIN125 SST ÁÁÁÁÁÁÁÁÁÁ
2 - -
ÁÁÁÁÁÁÁÁÁÁÁÁ
13 ÁÁÁÁÁÁÁÁÁÁ
250031 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M8x20 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
2 - -
14 207680 � Control cabinet, complete 1 - -
15 280585 � Hexagon head screw, M10x20/8.8, DIN933 4 - -
16 251375 � Washer, D10.5, DIN125 type B 4 - -
17 259202 � Hexagon nut, M10, DIN934, stainless 4 - -
18 394234 � Assy, base, complete w/o trafo 1 3 3
394235 � Assy, base, complete w/ trafo 1 3 4 - 5
19 207894 � Protection shield, Nordson-Blue 1 - -
20 425666 � Distance bolt, BC40, i-aM6, L40 4
21 415332 � Allan head cap screw, M6x8, DIN912, stainless 4
22 250077 � Allan head cap screw, M5x8, DIN912, stainless 2 - -
23 460821 � Protection shield, Nordson-Blue 1 - -
24 444933 � Cylinder pipe, left frame 1 - -
25 460919 � Base plate, A830, Nordson blue 1 - -
26 250060 � Lifting eye bolt, M10, DIN580 4 - -
27 250041 � Allan head cap screw, M10x20, DIN912, stainless 8 - -
28 409950 � Washer, D31, DIN125 type B 2 - -
29 444934 � Cylinder pipe, right frame 1 - -
30 279034 � Hexagon nut, M20-A2, low, DIN EN ISO 10511 2 - -
31 280552 � Washer, D21, DIN125 type B 2 - -
32 253616 � Piston, TDUO160-12 2 - -
33 461647 � Piston rod, L1415 2 - -
34 254277 � O-ring 154x3 2 - -
35 267234 � Circlip bore, D160, DIN472 2 - -
36 253648 � Sliding bearing, 40x44x50, PERMAGL.P11 4 - -
37 448008 � Rod guide 2 - -
38 253617 � Bar seal 2 - -
39 253618 � Dirt scraper 2 - -
40 783054 � Drum support, H=815/H=220 1 - -
41 461646 � Pull rod, L1435 2 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the document index and onthe ID plate) must be considered.
BM 200 EASY with Gear Pump8
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
461058
17
2
10
12
14
1
13
8
11
1
16
15
19
18
9
9
3
5
6
8
4
7
Fig. 5 Switch rod
Switch Rod
BM 200 EASY with Gear Pump 9
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 461058 Device, heating punch inquiry (switch rod) 1 - -
1 290317 � Allan head cap screw, M8x16, DIN912,stainless
3
2 250016 � Allan head cap screw, M4x35, DIN912,stainless
6
3 250075 � Allan head cap screw, M4x12, DIN912,stainless
6
4 427549 � Mounting plate, 30x12x69 3
5 250092 � Washer, D4.3, DIN125 type A 6
6 250141 � Hexagon nut, M4, DIN934 6
7 427548 � Mounting plate, 35x15x100 3
8 458560 � Level switch, w/connection cable, 3m 3
411671 � � Microswitch (refer to Other Electrical Components)
1
411671 � � Microswitch (refer to Other Electrical Components)
1
411671 � � Microswitch (refer to Other Electrical Components)
1
411672 � � Cover for microswitch 3
9 424649 � Set screw, M6x10/45H, DIN915 4
10 414892 � Guide rod, RAL9005 1
11 256853 � Washer, D8.4, DIN125 type B, stainless 1
12 414890 � Guide pipe, RAL9005 1
13 427547 � Mounting plate, 90x15x100 1
14 461059 � Contact maker bar 1
15 259202 � Hexagon nut M10, DIN934, stainless 1
16 251375 � Washer, D10.5, DIN125 type B 1
17 461557 � Mounting block, RAL9005 1
18 265972 � Serrated lock washer, D6.4, DIN6798 A 2
19 254682 � Allan head cap screw, M6x12, DIN912,stainless
2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump10
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
448009
1
2
7
4
4
6
1
3
5
5
8
9
Fig. 6 Hose support, single
Hose Support, Single
BM 200 EASY with Gear Pump 11
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 448009 Hose support, complete, single 1 7 1
1 461670 � Plug, d5, h25.4 2
2 461666 � Compression spring, 5x97,7x493 1
3 461667 � Weldment, hose hanger 1
4 250112 � Spring lock washer, D4, DIN127 A 2
5 250141 � Hexagon nut, M4, DIN934 2
6 250009 � Allan head cap screw, M4x8, DIN912, stainless 2
7 461669 � Clamp, 5mm, type:604/5 2
8 290317 � Allan head cap screw, M8x16, DIN912,stainless
2
9 256853 � Washer, D8.4 DIN125 type B, stainless 2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump12
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
464500
1
4
7
83
210
12
11
5
8
9
3
6
54
8
9
76
8
8
Fig. 7 Hose support, dual
Hose Support, Dual
BM 200 EASY with Gear Pump 13
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 464500 Hose support, complete, dual 1 7 2
1 461670 � Plug, d5, h25.4 4
2 461666 � Compression spring, 5x97,7x493 2
3 461667 � Weldment, hose hanger 2
4 250112 � Spring lock washer, D4, DIN127 A 4
5 250141 � Hexagon nut, M4, DIN934 4
6 250009 � Allan head cap screw, M4x8, DIN912, stainless 4
7 461669 � Clamp, 5mm, type:604/5 4
8 290317 � Allan head cap screw, M8x16, DIN912,stainless
6
9 256853 � Washer, D8.4 DIN125 type B, stainless 4
10 464499 � Mounting plate, 25x15x286, St37-K 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump14
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
788518
1
2
2
2
2
3
3
3
3
3
34
4
5
5
5
5
5
5
6
6
7
8
9
3
3
4
4
Fig. 8 Drive WS0370/PR
Drive, WS0370/PR
BM 200 EASY with Gear Pump 15
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 788518 Drive, WS0370/PR, complete 1 5 11 - 14
1 785866 � Motor, WS370, GCRB4B28-UD71XH-4G V1(refer to Other Electrical Components)
1
2 254951 � Hexagon head screw, M6x20, DIN933,stainless
4
3 250095 � Washer, D6.4, DIN125 type B, stainless 4
4 254714 � Hexagon nut, M8, DIN934, stainless 4
5 256834 � Set screw, M6x8/45H, DIN913 2
6 280514 � Set screw, M8x12/45H, DIN913 6
7 788519 � Motor flange, RAL9005 1
8 788556 � Shaft joint, extractable, typ:3GA 1
9 251922 � Blind plug, metal, PG16 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump16
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
788874
1
1
5
5
2 3 2
4
5
4 11
7
6
Fig. 9 Drive WS1500/PUS
Drive, WS1500/PUS
BM 200 EASY with Gear Pump 17
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 788874 Drive, WS1500/PUS, complete 1 5 50 - 53
1 256853 � Washer, D8.4, DIN125 type B, stainless 8
2 429956 � Hexagon head screw, M8x35, DIN931, stainless 4
3 401739 � Motor. WS1500. SCR24B28-UD90LNH-4G-V1(refer to Other Electrical Components)
1
4 254714 � Hexagon nut, M8, DIN934, stainless 4
5 280514 � Set screw. M8x12/45H. DIN913 8
6 444787 � Motor flange, RAL9005 1
7 783012 � Shaft joint, extractable. typ:6GA 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump18
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
788559
3
1
3
2 3 1
2
3
2
2
3
2
Fig. 10 Protection cover, PR..
Protection Cover, PR..
BM 200 EASY with Gear Pump 19
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 788559 Protection cover, PR2-PR12, L406, complete 1 5 11 - 13
— 788560 Protection cover, PR25-PR100, L385, complete 1 5 14
1 788557 Protection cover, PR2-PR12, L406 2 5 11 - 13
1 788558 Protection cover, PR25-PR100, L385 2 5 14
2 259432 � Allan head cap screw, M5x10, DIN912, stainless 6
3 255264 � Washer, D5.3, DIN125 type A 6
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump20
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
201780
1
3
1
2
3
2
Fig. 11 Protection cover, PU..
Protection Cover, PU..
BM 200 EASY with Gear Pump 21
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 201780 Protection cover, PU15/85, L435, complete 1 5 50
— 201781 Protection cover, PU25-35/85, L415, complete 1 5 51, 52
— 201783 Protection cover, PU50/85, L405, complete 1 5 53
1 788713 Protection cover, PU15/85, L435 2 5 50
1 783172 Protection cover, PU25-35/85, L415 2 5 51, 52
1 201779 Protection cover, PU50/85, L405 2 5 53
2 259432 � Allan head cap screw, M5x10, DIN912, stainless 2
3 255264 � Washer, D5.3, DIN125 type A 2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump22
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
290029
2 4 2
7
11
9
9
131
1
1
1
1
5
5
5
5
5
5
5
6
6
6
8
8
8
10
10
3
10
Fig. 12 Drum shell (drum jacket) H220
Drum Shell (Drum Jacket), H220
BM 200 EASY with Gear Pump 23
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 290029 Drum shell, H220, RAL9005, complete 1 - -
1 253322 � Allan head cap screw, M8x60/10.9, DIN912 8
2 429981 � Safety latch, RAL9005 2
3 250040 � Allan head cap screw, M8x90/10.9, DIN912 2
4 432157 � Back plate, RAL9005, H220 1
5 250144 � Hexagon nut, M8, DIN934 18
6 256853 � Washer, D8.4, DIN125 type B, stainless 10
7 432159 � Door 1
8 785736 � Flat head screw, M8x20, DIN7991 8
9 432160 � Shim plate, RAL9005 2
10 429964 � Locking jig, model:341 2
11 432158 � Door 1
- 429965 � Strip rolls, L40, D5/8, type:1033-U45 4
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump24
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
444789B
7
1 2 3 4 5 6
11
7 8 5 6 4
5
3
7
5
3
102
12
311
12
311
311
311
311
12
3
9
Fig. 13 Drum shell (drum jacket), H795
Drum Shell (Drum Jacket), H795
BM 200 EASY with Gear Pump 25
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 444789 Drum shell, H795, Nordson Blue, complete 1 1213
JX
1 444791 � Door 1
2 408827 � Flat head screw, M8x25, DIN7991 18
3 250144 � Hexagon nut, M8, DIN934 26
4 444912 � Safety latch 2
5 256853 � Washer, D8.4, DIN125 type B, stainless 8
6 319273 � Allan head cap screw, M8x50, DIN912 2
7 250031 � Allan head cap screw, M8x20, DIN912 6
8 444790 � Rear panel BM200 drum shell H795 NE Blue 1
9 429965 � Strip rolls, L40, D5/8, type:1033-U45 6
10 444792 � Door 1
11 429964 � Locking jig, model:341 3
12 444913 � Shim plate 3
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Item P/N Description Quantity Box Code
— 729882 Drum shell, H795, Nordson Blue, complete 1 1213
JW
1 444791 � Door 1
2 408827 � Flat head screw, M8x25, DIN7991 18
3 250144 � Hexagon nut, M8, DIN934 26
4 444912 � Safety latch 2
5 256853 � Washer, D8.4, DIN125 type B, stainless 8
6 254684 � Allan head cap screw, M8x40, DIN912 2
7 250031 � Allan head cap screw, M8x20, DIN912 8
8 729883 � Rear panel BM200−P drum shell H795 Blue 1
9 429965 � Strip rolls, L40, D5/8, type:1033-U45 6
10 444792 � Door 1
11 429964 � Locking jig, model:341 3
12 444913 � Shim plate 3
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump26
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
207961.01
4
2 3
5
1
3
3
678
Fig. 14 Device, drum inserted
Device, Drum Inserted
BM 200 EASY with Gear Pump 27
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 207961 Device, drum inserted 1 - -
1 251992 � Proximity switch, 24-240VAC/24-210VDC(refer to Other Electrical Components)
1
2 394847 � Bracket, M12x1, VX 1
3 250019 � Allan head cap screw, M5x12 DIN912, stainless 6
4 255264 � Washer, D5.3, DIN125 type A 2
5 394949 � Adapter block, VX 1
6 394848 � Piercer, VX 1
7 417717 � Compression spring, 1.5x20.5x50.7 1
8 394852 � Cover, VX 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump28
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
207053.00
14
12
1 5 6
16
2 3 4 7 8 9 10
13
15
17
18
19
15
11
Fig. 15 Heating punch
Heating Punch
BM 200 EASY with Gear Pump 29
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 207054 Heating punch BM200 D551 400V 2SAS compl 1 - -
1 255264 � Washer, D5.3, DIN125 type A 8 - -
2 259432 � Allan head cap screw, M5x10, DIN912, stainless 8 - -
3 416873 � Sealing ring, 4x8, DIN7603, form A 1 - -
4 250073 � Allan head cap screw, M4x10 DIN912-A2-70 1 - -
5 207031 � Electric cover, compl., PR/PU, VX, CE 1 - -
6 255289 � Notched taper pin, 1,7x4, DIN1476 2 - -
7 290082 � Sign, heat output,general 1 - -
8 461668 � O-ring 48x3 1 - -
9 207064 � Flange angel, metal, 90�, metric, M25x1.5 1 - -
10 250019 � Allan head cap screw, M5x12 DIN7991 2 - -
11 785547 � Hexagon head screw, M10x130/8.8, DIN931 6 - -
12 251375 � Washer, D10.5, DIN125, Form B 6 - -
13 250002 � Allan head cap screw, M3x5, DIN912, stainless 2 - -
14 120167 � Platen RTD Sensor(refer to Other Electrical Components)
1 - -
15 250307 � Screw plug 1/2NPTx14mm black 1
2
7
7
1
2
16 207042 � Heating punch, PU, 400V, 2SAS, D551, d512,VX
1 - -
17 207033 � Seal, electric cover, PR/PU 1 - -
18 7104269 � Hexagon nut, M4, DIN934-MS4 1 - -
19 265197 � Serrated lock washer D4,3 DIN6798 A 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump30
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
461070, 201027, 729390
P/N 461071
P/N 201028
1
3
4
2
1
3
3
P/N 729373
3
Fig. 16 Melting plates
Finned Melting Plate
Axial Melting Plate
Smooth Melting Plate
BM 200 EASY with Gear Pump 31
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 461070 Finned Melting plate, VX, complete 1 2 F, P
3 461071 � Finned melting plate 1 - -
2 251360 � � Thread insert, M10x18, type: RAMPA 6 - -
4 250290 � O-ring, 10x2 1 - -
1 - Hose connection fitting, compl.(refer to Hose Connection NW08/16, NW20,NW32)
1
2
7
7
1
2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Item P/N Description Quantity Box Code
— 201027 Axial plate, VX, complete 1 2 A, B, R,C
3 201028 � Axial plate 1 - -
2 251360 � � Thread insert, M10x18, type: RAMPA 6 - -
4 250290 � O-ring, 10x2 1 - -
1 - Hose connection fitting, compl.(refer to Hose Connection NW08/16, NW20,NW32)
1
2
7
7
1
2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Item P/N Description Quantity Box Code
— 729390 Smooth plate, VX, complete 1 2 G, U
3 729373 � Smooth plate 1 - -
2 251360 � � Thread insert, M10x18, type: RAMPA 6 - -
4 250290 � O-ring, 10x2 1 - -
1 - Hose connection fitting, compl.(refer to Hose Connection NW08/16, NW20,NW32)
1
2
7
7
1
2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump32
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
464473
3
4
21
5
6
Fig. 17 Hose connection, NW08/16
Item P/N Description Quantity Box Code
— 464473 Hose fitting, NW08/16, VX, compl. 1 7 1
2 7 2
1 203786 � Hose fitting, a1 1/16−12−a3/4UNF 1 - -
2 446617 � Hose fitting, a9/16UNF−a3/4UNF 1 - -
3 415788 � Hexagon head screw, M6x30, DIN933 4 - -
4 250095 � Washer, D6.4, DIN125 type B 4 - -
5 207272 � Adapter plate, i3/4UNF-a60x60, VX 1 - -
6 252252 � O-ring, 42x2 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Hose Connection, NW08/16
BM 200 EASY with Gear Pump 33
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
201694
3
1
5
3
2 3
2
4
2
Fig. 18 Hose connection, NW20
Item P/N Description Quantity Box Code
— 201694 Hose fitting, NW20, compl. 1 7 1
2 7 2
1 262628 � Hose fitting, a1 5/8 12N−a1NPT 1 - -
2 250095 � Washer, D6.4, DIN125 type B 4 - -
3 415788 � Hexagon head screw, M6x30, DIN933 4 - -
4 201693 � Adapter plate, i1NPT, -a60x60 1 - -
5 252252 � O-ring, 42x2 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Hose Connection, NW20
BM 200 EASY with Gear Pump34
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
460990
2
1
4
3
2
1
Fig. 19 Hose connection, NW32
Item P/N Description Quantity Box Code
— 460990 Hose fitting, NW32, VX, compl. 1 7 1
2 7 2
1 442285 � Hexagon head screw, M6x20, DIN933, stainless 4 - -
2 250095 � Washer, D6.4, DIN125 type B 4 - -
3 460932 � Hose fitting, aM45x1.5-a60x60, L60, VX 1 - -
4 252252 � O-ring 42x2 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Hose Connection, NW32
BM 200 EASY with Gear Pump 35
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
1
1
Fig. 20 Drum sealing
Item P/N Description Quantity Box Code
1 276977 � Seal, T.E.S, Model 500 12
12-
J-
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
Drum Sealing
BM 200 EASY with Gear Pump36
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
256015.00
1 2
3
4
5
6
7
8
19
18
17
16
15
14
12
1011 9
12
13
Fig. 21 Gear pump PR6m1
Gear Pump, PR6m1
BM 200 EASY with Gear Pump 37
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 256015 Gear pump, PR6m1 1 5 11
1 250171 � Feather key, 4x4x6, DIN6885 1
2 256590 � Gear A, PR6m1 1
3 253631 � Parallel pin, 12x40 1
4 256591 � Gear B, PR6m1 1
5 289040 � Pump block 1
6 259883 � End block, PR4m1 1
7 252595 � O-ring, 10x1,5 1
8 254439 � Pump shaft, PR6, compl. 1
− 255810 � � Washer, 12.5x90degreex18x3.6 1
− 255897 � � Allen countersunk screw, M5x10, DIN7991 1
− 255898 � � Serrated lock washer, D5.3, DIN6798 V 1
9 255289 � Notched taper pin, 1.7x4, DIN1476 2
10 400774 � ID. TAG 1
11 290570 � Front block, PR4m1 1
12 250036 � Allan head cap screw, M8x55, DIN912 4
13 250129 � Parallel pin, 8m6x50, DIN6325, hdn. 2
14 253843 � O-ring, 18x1.5 1
15 253814 � Bushing, PR, D12.7 1
16 253813 � Sealing ring, 12.5x18.5x6 1
17 250623 � Washer 1
18 250162 � Compression spring, 2x15.2x13 1
19 253874 � Packing screw, SW24, nickel 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump38
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
254316.00
1 2
3
4
5
6
7
8
19
18
17
16
15
14
12
12
13
10 911
Fig. 22 Gear pump PR12m1
Gear Pump, PR12m1
BM 200 EASY with Gear Pump 39
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 254316 Gear pump, PR12m1 1 5 12
1 −−−−−− � Feather key, 4x4x10 DIN6885 1
2 −−−−−− � Gear A, PR12m1 1
3 −−−−−− � Parallel pin, 12x40 1
4 −−−−−− � Gear B, PR12m1 1
5 −−−−−− � Pump block 1
6 −−−−−− � End block, PR6-12m1 1
7 −−−−−− � O-ring, 10x1.5 1
8 −−−−−− � Pump shaft, PR12, compl. 1
− −−−−−− � � Washer, 12.5x90degreex18x3.6 1
− −−−−−− � � Allen countersunk screw, M5x10, DIN7991 1
− −−−−−− � � Serrated lock washer, D5.3, DIN6798 V 1
9 −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
10 −−−−−− � ID. TAG 1
11 −−−−−− � Front block, PR6-12m1 1
12 −−−−−− � Allan head cap screw, M8x60/10.9, DIN912 4
13 −−−−−− � Parallel pin, 8m6x50, DIN6325, hdn. 2
14 −−−−−− � O-ring, 18x1.5 1
15 −−−−−− � Bushing, PR, D12.7 1
16 −−−−−− � Sealing ring, 12.5x18.5x6 1
17 −−−−−− � Washer 1
18 −−−−−− � Compression spring, 2x15.2x13 1
19 −−−−−− � Packing screw, SW24, nickel 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump40
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
254247.00
1 2
3
4
5
6
7
8
19
18
17
16
15
14
12
12
13
10 911
Fig. 23 Gear pump PR12m2
Gear Pump, PR12m2
BM 200 EASY with Gear Pump 41
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 254247 Gear pump, PR12m2 1 5 13
1 −−−−−− � Feather key, 4x4x10, DIN6885 1
2 −−−−−− � Gear A, PR12m2 1
3 −−−−−− � Parallel pin, 12x40 1
4 −−−−−− � Gear B, PR12m2 1
5 −−−−−− � Pump block 1
6 −−−−−− � End block, PR6-25m2 1
7 −−−−−− � O-ring, 10x1,5 1
8 −−−−−− � Pump shaft, PR12, compl. 1
− −−−−−− � � Washer, 12.5x90degreex18x3.6 1
− −−−−−− � � Allen countersunk screw, M5x10, DIN7991 1
− −−−−−− � � Serrated lock washer, D5.3, DIN6798 V 1
9 −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
10 −−−−−− � ID. TAG 1
11 −−−−−− � Front block, PR6-25m2 1
12 −−−−−− � Allan head cap screw, M8x60/10.9, DIN912 4
13 −−−−−− � Parallel pin, 8m6x50, DIN6325, hdn. 2
14 −−−−−− � O-ring, 18x1,5 1
15 −−−−−− � Bushing, PR, D12.7 1
16 −−−−−− � Sealing ring, 12.5x18.5x6 1
17 −−−−−− � Washer 1
18 −−−−−− � Compression spring, 2x15.2x13 1
19 −−−−−− � Packing screw, SW24, nickel 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump42
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
254279.00
1
3
4
5
6
7
8
19
18
17
16
15
14
12
13
10 911
2
12
Fig. 24 Gear pump PR25m2
Gear Pump, PR25m2
BM 200 EASY with Gear Pump 43
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 254279 Gear pump, PR25m2 1 5 14
1 −−−−−− � Feather key, 4x4x22, DIN6885 1
2 −−−−−− � Gear A, PR25m2 1
3 −−−−−− � Parallel pin, D12x59 1
4 −−−−−− � Gear B, PR25m2 1
5 −−−−−− � Pump block 1
6 −−−−−− � End block, PR6-25m2 1
7 −−−−−− � O-ring, 10x1.5 1
8 −−−−−− � Pump shaft, PR12, compl. 1
− −−−−−− � � Washer, 12.5x90degreex18x3.6 1
− −−−−−− � � Allen countersunk screw, M5x10, DIN7991 1
− −−−−−− � � Serrated lock washer, D5.3, DIN6798 V 1
9 −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
10 −−−−−− � ID. TAG 1
11 −−−−−− � Front block, PR6-25m2 1
12 −−−−−− � Allan head cap screw, M8x75/10.9, DIN912 4
13 −−−−−− � Parallel pin, 8m6x60, DIN6325, hdn. 2
14 −−−−−− � O-ring, 18x1.5 1
15 −−−−−− � Bushing, PR, D12.7 1
16 −−−−−− � Sealing ring, 12.5x18.5x6 1
17 −−−−−− � Washer 1
18 −−−−−− � Compression spring, 2x15.2x13 1
19 −−−−−− � Packing screw, SW24, nickel 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump44
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
788552.00
1
14 13
2
3
4
12
5
10
6
10
8
7
11
9
Fig. 25 Adapter plate, gear pumps PR..
Adapter Plate, Gear Pumps PR..
BM 200 EASY with Gear Pump 45
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 788552 Adapter plate, PUS/PR1.5-25, compl. 1 5 11 - 14
1 256829 � Allan head cap screw, M8x65/10.9, DIN912 12
2 250092 � Washer, D4.3, DIN125 type A 2
3 250015 � Allan head cap screw, M4x30, DIN912,stainless
2
4 259946 � Electric cover, PUS pumps, L195, CE 1
- � � Notched taper pin, 3.2x6.5, DIN7337 2
- � � Sign 1
5 788955 � Sealing electric cover, PUS pumps 1
6 250691 � Heater cartridge, 3/8”x4”, 230V-220W(refer to Other Electrical Components)
2
7 250012 � Allan head cap screw, M4x16, DIN912,stainless
1
8 251042 � Luster terminal, ceramics, 2p. 2.5qmm 1
9 120167 � RTD sensor, pump heating(refer to Other Electrical Components)
1
10 250302 � Screw plug, 1/8NPTx7.5mm, black 2
12 788553 � Adapter plate PUS/PR1.5-25 1
13 250270 � O-ring 35x3 1
14 252480 � O-ring 19x2.5 1
11 315383 safety valve 100bar MX(refer to Safety Valve)
1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump46
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
788611
1 2 3
4
5
6
7
8
8
19
8
9
10
11
13
14
16
18
18
17
17
20
22 21232526 242827 27
24
30
31
32
34
33
29
12
15
Fig. 26 Gear pump PU15/85R
Gear Pump, PU15/85R
BM 200 EASY with Gear Pump 47
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 788611 Gear pump, PU15/85R, D25, heated 1 5 50
1 −−−−−− � Hexagon head screw, M6x20, DIN933, stainless 4
2 −−−−−− � Disc spring, D12.5, GR1, DIN2093 type A 12
3 −−−−−− � Pressure piece, PU25-50/85 1
4 −−−−−− � Turcon-Roto-Variseal, D25, inside seal 1
5 −−−−−− � Sleeve, PU25-50 1
6 −−−−−− � O-ring, 36x3 1
7 −−−−−− � Ring 1
8 −−−−−− � Allan head cap screw, M8x80/10.9, DIN912 12
9 −−−−−− � Electric cover, PUS pumps, L195, CE 1
19 −−−−−− � � Notched taper pin, 3.2x6.5, DIN7337 2
20 −−−−−− � � Sign 1
10 −−−−−− � Allan head cap screw, M4x30, DIN912,stainless
2
11 −−−−−− � Washer, D4.3, DIN125 type A 2
12 788955 � Sealing electric cover, PUS pumps 1
13 263242 � Heater cartridge, 3/8”x2”, 230V-250W(refer to Other Electrical Components)
2
14 −−−−−− � Allan head cap screw, M4x16, DIN912,stainless
1
15 120167 � RTD sensor, pump heating(refer to Other Electrical Components)
1
16 −−−−−− � Luster terminal, ceramics, 2p. 2.5qmm 1
17 −−−−−− � Set screw, M8x35/45H, DIN913 2
18 −−−−−− � Screw plug, 1/8NPTx7.5mm, black 2
21 252753 � Safety valve, 100bar, ZS/BM/PUS(refer to Safety Valve)
1
22 −−−−−− � Front block, PU25-50/85R, D25 1
23 −−−−−− � O-ring, 35x3 1
24 −−−−−− � Parallel pin, D8m6x70, DIN6325, hdn. 2
25 −−−−−− � Feather key A, 8x7x30, DIN6885 1
26 −−−−−− � Feather key A, 8x7x14, DIN6885 1
27 −−−−−− � O-ring, 42x3 2
28 −−−−−− � Pump shaft, PU15/85, w/collar 1
29 −−−−−− � Parallel pin, D25x60 1
30 −−−−−− � O-ring, 19x2,5 1
31 −−−−−− � End block, PU25-50/85, D25, w/o bushing 1
32 −−−−−− � Pump block, PU15/85 1
33 −−−−−− � Gear A, PU15/85m2.5, D25, w/o bushing 1
34 −−−−−− � Gear B, PU15/85m2.5 D25, w/o bushing 1
- −−−−−− � ID plate, 38x30, pumps Nordson 1
- −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
BM 200 EASY with Gear Pump48
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
CodeItem BoxQuantityDescriptionP/N
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump 49
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
402166
1 2 3
4
5
6
7
8
8
19
8
9
10
11
13
14
16
18
18
17
17
20
22 21232526 242827 27
24
30
31
32
34
33
29
12
15
Fig. 27 Gear pump PU25/85R
Gear Pump, PU25/85R
BM 200 EASY with Gear Pump50
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 402166 Gear pump, PU25/85R, D25, heated 1 5 51
1 −−−−−− � Hexagon head screw, M6x20, DIN933, stainless 4
2 −−−−−− � Disc spring, D12.5, GR1, DIN2093 type A 12
3 −−−−−− � Pressure piece, PU25-50/85 1
4 −−−−−− � Turcon-Roto-Variseal, D25, inside seal 1
5 −−−−−− � Sleeve, PU25-50 1
6 −−−−−− � O-ring, 36x3 1
7 −−−−−− � Ring 1
8 −−−−−− � Allan head cap screw, M8x90/10.9, DIN912 12
9 −−−−−− � Electric cover, PUS pumps, L195, CE 1
19 −−−−−− � � Notched taper pin, 3.2x6.5, DIN7337 2
20 −−−−−− � � Sign 1
10 −−−−−− � Allan head cap screw, M4x30, DIN912,stainless
2
11 −−−−−− � Washer, D4.3, DIN125 type A 2
12 788955 � Sealing electric cover, PUS pumps 1
13 263242 � Heater cartridge, 3/8”x2”, 230V-250W(refer to Other Electrical Components))
2
14 −−−−−− � Allan head cap screw, M4x16, DIN912,stainless
1
15 120167 � RTD sensor, pump heating(refer to Other Electrical Components))
1
16 −−−−−− � Luster terminal, ceramics, 2p. 2.5qmm 1
17 −−−−−− � Set screw, M8x35/45H, DIN913 2
18 −−−−−− � Screw plug, 1/8NPTx7.5mm, black 2
21 252753 � Safety valve, 100bar, ZS/BM/PUS(refer to Safety Valve)
1
22 −−−−−− � Front block, PU25-50/85R, D25 1
23 −−−−−− � O-ring, 35x3 1
24 −−−−−− � Parallel pin, D8m6x80, DIN6325, hdn. 2
25 −−−−−− � Feather key A, 8x7x30, DIN6885 1
26 −−−−−− � Feather key A, 8x7x24, DIN6885 1
27 −−−−−− � O-ring, 42x3 2
28 −−−−−− � Pump shaft, PU25/85, w/collar 1
29 −−−−−− � Parallel pin, D25x70 1
30 −−−−−− � O-ring, 19x2.5 1
31 −−−−−− � End block, PU25-50/85, D25, w/o bushing 1
32 −−−−−− � Pump block, PU25/85 1
33 −−−−−− � Gear A, PU25/85m2.5, D25, w/o bushing 1
34 −−−−−− � Gear B PU25/85m2,5 D25 w/o bushing 1
- −−−−−− � ID plate, 38x30, pumps Nordson 1
- −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
BM 200 EASY with Gear Pump 51
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
CodeItem BoxQuantityDescriptionP/N
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump52
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
402170
1 2 3
4
5
6
7
8
8
19
8
9
10
11
13
14
1618
18
17
17
20
22 21232526 242827 27
24
30
31
32
34
33
29
12
15
Fig. 28 Gear pump PU35/85R
Gear Pump, PU35/85R
BM 200 EASY with Gear Pump 53
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 402170 Gear pump, PU35/85R, D25, heated 1 5 52
1 −−−−−− � Hexagon head screw, M6x20, DIN933, stainless 4
2 −−−−−− � Disc spring, D12.5, GR1, DIN2093 type A 12
3 −−−−−− � Pressure piece, PU25-50/85 1
4 −−−−−− � Turcon-Roto-Variseal, D25, inside seal 1
5 −−−−−− � Sleeve, PU25-50 1
6 −−−−−− � O-ring, 36x3 1
7 −−−−−− � Ring 1
8 −−−−−− � Allan head cap screw, M8x100/10.9, DIN912 12
9 −−−−−− � Electric cover, PUS pumps, L195, CE 1
19 −−−−−− � � Notched taper pin, 3.2x6.5, DIN7337 2
20 −−−−−− � � Sign 1
10 −−−−−− � Allan head cap screw, M4x30, DIN912,stainless
2
11 −−−−−− � Washer, D4.3, DIN125 type A 2
12 788955 � Sealing electric cover, PUS pumps 1
13 263242 � Heater cartridge, 3/8”x2”, 230V-250W(refer to Other Electrical Components)
2
14 −−−−−− � Allan head cap screw, M4x16, DIN912,stainless
1
15 120167 � RTD sensor, pump heating(refer to Other Electrical Components)
1
16 −−−−−− � Luster terminal, ceramics, 2p. 2.5qmm 1
17 −−−−−− � Set screw, M8x35/45H, DIN913 2
18 −−−−−− � Screw plug, 1/8NPTx7.5mm, black 2
21 252753 � Safety valve, 100bar, ZS/BM/PUS(refer to Safety Valve)
1
22 −−−−−− � Front block, PU25-50/85R, D25 1
23 −−−−−− � O-ring, 35x3 1
24 −−−−−− � Parallel pin, D8m6x80, DIN6325, hdn. 2
25 −−−−−− � Feather key A, 8x7x30, DIN6885 1
26 −−−−−− � Feather key A, 8x7x30, DIN6885 1
27 −−−−−− � O-ring, 42x3 2
28 −−−−−− � Pump shaft, PU35/85, w/collar 1
29 −−−−−− � Parallel pin, D25x70 1
30 −−−−−− � O-ring, 19x2.5 1
31 −−−−−− � End block, PU35-50/85, D25, w/o bushing 1
32 −−−−−− � Pump block, PU25/85 1
33 −−−−−− � Gear A, PU35/85m2.5, D25, w/o bushing 1
34 −−−−−− � Gear B, PU35/85m2.5, D25, w/o bushing 1
- −−−−−− � ID plate, 38x30, pumps Nordson 1
- −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
BM 200 EASY with Gear Pump54
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
CodeItem BoxQuantityDescriptionP/N
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump 55
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
402166
1 2 3
4
5
6
7
8
8
19
8
9
10
11
1314
1618
18
17
17
20
22 21232526 242827 27
24
30
31
32
34
33
29
12
15
Fig. 29 Gear pump PU50/85R
Gear Pump, PU50/85R
BM 200 EASY with Gear Pump56
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 400764 Gear pump, PU50/85R, D25, heated 1 5 53
1 −−−−−− � Hexagon head screw, M6x20, DIN933, stainless 4
2 −−−−−− � Disc spring, D12.5, GR1, DIN2093 type A 12
3 −−−−−− � Pressure piece, PU25-50/85 1
4 −−−−−− � Turcon-Roto-Variseal, D25, inside seal 1
5 −−−−−− � Sleeve, PU25-50 1
6 −−−−−− � O-ring, 36x3 1
7 −−−−−− � Ring 1
8 −−−−−− � Allan head cap screw, M8x110/10.9, DIN912 12
9 −−−−−− � Electric cover, PUS pumps, L195, CE 1
19 −−−−−− � � Notched taper pin, 3.2x6.5, DIN7337 2
20 −−−−−− � � Sign 1
10 −−−−−− � Allan head cap screw, M4x30, DIN912,stainless
2
11 −−−−−− � Washer, D4.3, DIN125 type A 2
12 788955 � Sealing electric cover, PUS pumps 1
13 263242 � Heater cartridge 3/8”x2” 230V-250W(refer to Other Electrical Components)
2
14 −−−−−− � Allan head cap screw, M4x16, DIN912,stainless
1
15 120167 � RTD sensor, pump heating(refer to Other Electrical Components)
1
16 −−−−−− � Luster terminal, ceramics, 2p. 2.5qmm 1
17 −−−−−− � Set screw, M8x35/45H, DIN913 2
18 −−−−−− � Screw plug, 1/8NPTx7.5mm, black 2
21 252753 � Safety valve, 100bar, ZS/BM/PUS(refer to Safety Valve)
1
22 −−−−−− � Front block, PU25-50/85R, D25 1
23 −−−−−− � O-ring, 35x3 1
24 −−−−−− � Parallel pin, D8m6x100, DIN6325, hdn. 2
25 −−−−−− � Feather key A, 8x7x40, DIN6885 1
26 −−−−−− � Feather key A, 8x7x40, DIN6885 1
27 −−−−−− � O-ring, 42x3 2
28 −−−−−− � Pump shaft, PU50/85, w/collar 1
29 −−−−−− � Parallel pin, D25x90 1
30 −−−−−− � O-ring, 19x2.5 1
31 −−−−−− � End block, PU25-50/85, D25, w/o bushing 1
32 −−−−−− � Pump block, PU50/85 1
33 −−−−−− � Gear A, PU50/85m2.5, D25, w/o bushing 1
34 −−−−−− � Gear B, PU50/85m2.5, D25, w/o bushing 1
- −−−−−− � ID plate, 38x30, pumps Nordson 1
- −−−−−− � Notched taper pin, 1.7x4, DIN1476 2
BM 200 EASY with Gear Pump 57
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
CodeItem BoxQuantityDescriptionP/N
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump58
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
394229
14
2 3 4 5 6 7 8 9 13
15
12
18
212223242526
31
30
29
10 11 12
16
17
18
19
20
1
27
28
1
Fig. 30 Auto Aeration valve
Auto Aeration Valve
BM 200 EASY with Gear Pump 59
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 394229 Auto aeration valve, VX 1 2 A,B,F,G
1 317860 � Allan head cap screw, M4x60, DIN912, stainless 4
2 250259 � O-ring, 18x2 3
3 251984 � Turcon-Stepseal, D5, inside seal 1
4 251983 � O-ring, 6.07x1.78 1
5 252043 � Washer, 5.1x12x2, EP 1
6 252133 � Circlip bore, D12, DIN472 1
7 203142 � Modular cartridge 1
8 789741 � Compression spring, 1.25x12.5x27 1
9 261025 � Allan head cap screw, M3x8, DIN912, stainless 1
10 316848 � O-ring, 17-0.5+0x2.5+max.0.16-0 1
11 219138 � Piston, EB60V, D22 1
12 259432 � Allan head cap screw, M5x10, DIN912, stainless 4
13 418645 � O-ring, 13x2 1
14 203239 � Sleeve, VX 1
15 291048 � O-ring, 18x2.5 1
16 203241 � Flange, aeration, VX 1
17 252258 � O-ring, 25x2.5 1
18 251764 � O-ring, 14x2 2
19 252205 � O-ring, 12x1.5 1
20 203240 � Needle seat, VX 1
21 203138 � Needle extension, D5, L311 1
22 203139 � Nozzle stem, D5, L20 1
23 785733 � Safety valve, 0.5bar, 1/4 1
24 250300 � Sealing ring, R1/4, type:PDR-14 1
25 285878 � Screw plug, G1/4, DIN908 1
26 268015 � Circlip shafts, D22, DIN471 1
27 203143 � Air connection 1
28 410182 � Set screw, M3x4/45H, DIN915 1
29 219128 � Cylinder, EB60V, D22 1
30 414098 � Sealing ring, 10x15x2 2
31 259309 � Connector, slip collar, D6-aG1/8, L20.5, stainless 2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump60
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
394716
8910109
2 3 4 5
6
11
12
1 4 3
7
Fig. 31 Installation kit
Installation Kit
BM 200 EASY with Gear Pump 61
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 394716 Installation kit 1 2 A,B,F,G
1 315541 � Silencer, R1/8 1
2 254248 � Solenoid valve, 4/2-ways, 24V/5.9W, G1/8, cpl.(refer to Other Electrical Components)
1
3 201973 � Hose nozzle, aR1/8, Di6, SW12 2
4 416700 � Hose clamp, D8-12, DIN3017 2
5 253671 � Hose, grey, type:801-6.3 500 mm
6 414098 � Sealing ring, 10x15x2 3
7 404493 � Thread-in fitting, -G-D06-G1/8-000 2
8 250300 � Sealing ring, R1/4, type:PDR-14 2
9 430078 � Hose nozzle, aG1/4, Di9, L38 2
10 252280 � Hose clamp, D10-16/9, DIN3017 2
11 394697 � Hose, grey, type:801-9.5 500 mm
12 428617 � Connection piece, aG1/4-iG1/4, 90�, L35, NW6 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump62
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
207962.03
1
14
22
2 4 5 6
8
21
23
24
3
7
8
9
8
10
11
12
11
10
13
19 15161718
20
Fig. 32 Man. aeration valve
Man. Aeration Valve
BM 200 EASY with Gear Pump 63
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 207962 Man. aeration valve, VX 1 2 R,C,P
1 394048 � Bracket, aeration 1
2 420185 � Fitting, iG3/8-iG3/8 1
3 252032 � Sealing ring, R3/8, type:ODR-38 1
4 433461 � Air coupling,male, aG3/8, L33 1
5 250073 � Allan head cap screw, M4x10, DIN912-A2-70 2
6 269172 � Double nipple, aR1/4-aR1/4 1
7 269260 � Safety valve, 0.5bar, 1/4 1
8 255166 � Sealing ring, R1/4, type:PDR-14 3
9 280370 � T-piece, 3xiRp1/4 1
10 430078 � Hose nozzle, aG1/4, Di9, L38 2
11 252280 � Hose clamp, D10-16/9, DIN3017 2
12 394697 � Hose, grey, type:801-9.5 600 mm
13 442495 � Air coupling, female, iR1/4, NW7.2, L43, SW22 1
14 394047 � Pipe, double side, a=3/8” 1
15 269169 � Reducer, aR1/2-iRp3/8, L24, NW15 1
16 401878 � Screw plug, G1/8, with O-ring 1
17 202359 � Band-clamp, 4109, type:243 1
18 461141 � Threaded bolt, M8x25 1
19 201635 � Pipe clmap, Di40 1
20 783101 � Pipe, 28.3x1.4x3000, double side, a=PG21 40 mm
21 252258 � O-ring, 25x2.5 1
22 394141 � Flange, aeration, VX 1
23 250019 � Allan head cap screw, M5x12, DIN912, stainless 1
24 394140 � Aeration rod, compl. 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump64
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
444896
8
7 2
3
6
4
5
1
1
Fig. 33 Air-relief valve (deaeration valve)
Air-relief Valve (Deaeration Valve)
BM 200 EASY with Gear Pump 65
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 444896 Air-relief valve BM200 ME 1 - -
1 259425 � Ball valve, 2ways, iR1/4-iR1/4, DN6, PN30, VX 1
2 783018 � Extension, L547, RAL9005 1
3 262003 � Drip tray, L110, VX 2
4 251772 � Sealing ring, 14x18, DIN7603 form A 2
5 269172 � Double nipple, aR1/4-aR1/4 1
6 250062 � Set screw, M4x4/45H, DIN913 2
7 254679 � Allan head cap screw, M5x20, DIN912, stainless 2
8 455913 � Stop, RAL9005 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump66
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
315383
1
6
5
7
2
3
4
Fig. 34 Safety valve
Safety Valve (for Adapter Plate)
BM 200 EASY with Gear Pump 67
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 315383 Safety valve, 100bar, MX 1 5 11 - 14
1 402613 � Set screw, “black“, MX, max. 100bar 1
2 250164 � Compression spring, 2.2x7.4x34.4 1
3 252665 � Piston, safety valve 1
4 250283 � O-ring, 6x2 1
5 250252 � O-ring, 11x2 1
6 401850 � Valve element, safety, MX 1
7 291460 � Set screw, M4x6/45H, DIN915 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump68
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
H
1
2
3
4
5
6
7
8
Fig. 35 Safety valve
Safety Valve (for PU-Pump)
BM 200 EASY with Gear Pump 69
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
− 252753 Safety valve, 100bar, ZS/BM/PUS 1 5 50 - 53
1 252665 � piston, safety valve 1
2 250283 � o−ring 6x2 1
3 252662 � valve element, bypass 1
4 250252 � o−ring 11x2 1
5 250292 � o−ring 8x2 1
6 250164 � compression spring 2,2x7,4x34,4 1
7 252732 � set screw ”black” 100bar 1
8 252867 � guide nut, bypass VX 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump70
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
The exhaust hood can be supplied as an accessory. When processingPUR a smooth melting plate is needed in addition.
460816
1
8
10
11
52 33 4 4 6
7
8
7
9
Fig. 36 Exhaust hood
Exhaust Hood
BM 200 EASY with Gear Pump 71
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 460816 Exhaust hood, complete 1 2 B,C,G,U
— 729884 Exhaust hood, complete 1 213
B,C,G,UW
1 250027 � Allan head cap screw, M6x16, DIN912, stainless 3
2 250095 � Washer, D6.4, DIN125 type B 14
3 314370 � Allan head cap screw, M8x30, DIN912, stainless 2
4 256853 � Washer, D8.4, DIN125 type B, stainless 4
5 250029 � Allan head cap screw, M6x25, DIN912, stainless 4
6 254714 � Hexagon nut, M8, DIN934, stainless 2
7 433798 � Clamp, RAL9005 2
8 460636 � Clamp, RAL9005 2 213
B,C,G,UX
729885 � Clamp 213
B,C,G,UW
9 259200 � Hexagon nut, M6, DIN934 7
10 460819 � Cross beam 1
11 460759 � Container, exhaust hood 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump72
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
207963_05
Be
lüft
un
g m
an
ue
ll
1,
45
, 6
0
2
19
, 2
6,
27
, 2
9,
20
, 2
1
5,
44
, 4
7
4,
42
31
6,
48
12
33
, 1
3
13
14
141513
17
, 1
3
19
, 2
4
1325
22
22
23
32
30
314
0,
41
34
11
9,
10
, 5
2
38
, 3
9
e
b
b
3,
49
, 5
0
Bel
üftu
ng a
utom
atis
ch
61
20
,21
a
aa
16
, 1
8
b
51cd
d
dd
d
dd
d
d
dd
d
7,
8,
39
, 1
4e
15
3
42
14
13
42
LKJHGFEDCBA
1312
1110
98
76
54
32
1
MLKJHGFEDCBA
1615
1413
1211
109
87
65
43
21
2:1
Schu
tzve
rmer
k na
ch D
IN I
SO 1
6016
bea
chte
n!
Stat
us
Datu
mNa
me
Geze
ichn
et
letz
te A
end.
Gesp
errt
Maßs
tab
nach
DIN
ISO
276
8−1m
All
geme
into
lera
nzenP/
N
Rohm
at.
P/N
Werk
stof
f
Zust
.
Blat
t
Ersa
tz f
ür
Erse
tzt
durc
h
Änd.
Mitt
lg.N
r.Na
meDa
tum
Vers
ion
2079
63
PN
EU
MA
TIK
KO
MP
L.O
.SC
HR
AN
K
2079
6305
1
und
DIN
ISO
2768
−2H
01−0
7−20
03
06−0
8−20
04gabr
iele
.gor
alsk
i
FREI
GEGE
BEN
Zusc
hnit
tlg.
0
bern
hard
.mey
er
BM20
0
Dien
stag
, 1.
Jul
i 20
03 0
8:24
:45
gabr
iele
.gor
alsk
ile
tzte
Spe
iche
rung
von
/ a
m:
207963
g f e d
01
/31
/04
06/1
0/04
09/4
7/03
09/2
3/03
bm
e.
bme.
bme.
bme.
27
.07
.20
04
27.0
7.20
04
27.0
7.20
04
27.0
7.20
04
f
gg
gg
e
e
f
Fig. 37 Pneumatic complete (pneumatic diagram)
Pneumatic Compl. (Pneumatic Diagram)
BM 200 EASY with Gear Pump 73
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code− 207963 Pneumatic , compl. w/o cabinet 1ÁÁÁÁÁÁ
ÁÁÁÁÁÁ1 ÁÁÁÁÁ
ÁÁÁÁÁ203994 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� solenoid valve 5/3ways 24V G1/4 ÁÁÁÁÁ
ÁÁÁÁÁ1
ÁÁÁÁÁÁÁÁÁÁÁÁ
2 ÁÁÁÁÁÁÁÁÁÁ
424254 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� filter and control valve LFR−1/4−D−MINI ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
3 ÁÁÁÁÁÁÁÁÁÁ
316135 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� pressure control valve 0,1−10bar G1/4 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁ4 ÁÁÁÁÁ280837 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� distributor G1/4−4x FR−4−1/4−C ÁÁÁÁÁ1ÁÁÁÁÁÁÁÁÁÁÁÁ5
ÁÁÁÁÁÁÁÁÁÁ394656
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� mounting bracket HFOE−D−MINI
ÁÁÁÁÁÁÁÁÁÁ1ÁÁÁÁÁÁ
ÁÁÁÁÁÁ6
ÁÁÁÁÁÁÁÁÁÁ
207904ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� air manifold G1/4,G1/8ÁÁÁÁÁÁÁÁÁÁ
1ÁÁÁÁÁÁÁÁÁÁÁÁ
7 ÁÁÁÁÁÁÁÁÁÁ
284550 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� hollow screw 2single G1/4 L56 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
8 ÁÁÁÁÁÁÁÁÁÁ
284549 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� fitting G1/4 1xiG1/4 ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
9 ÁÁÁÁÁÁÁÁÁÁ
418516 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� clamp DIN3016−A1 8x12−W1−2 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁ10 ÁÁÁÁÁ439627 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� plug−type thread fitting −G−D08−D08−BHD ÁÁÁÁÁ1ÁÁÁÁÁÁÁÁÁÁÁÁ
11ÁÁÁÁÁÁÁÁÁÁ
250001ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� RO=8x1 L3000 W1.0309 St35.4 zinc platedÁÁÁÁÁÁÁÁÁÁ
1.500 mmÁÁÁÁÁÁÁÁÁÁÁÁ
12 ÁÁÁÁÁÁÁÁÁÁ
784883 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread fitting −T−D08−D08−CONN ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
13 ÁÁÁÁÁÁÁÁÁÁ
418627 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread−in ftg.−G−D08−R1/4−0000 ÁÁÁÁÁÁÁÁÁÁ
7
ÁÁÁÁÁÁÁÁÁÁÁÁ
14 ÁÁÁÁÁÁÁÁÁÁ
428677 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread−in ftg.−W−D08−R1/4−TURN ÁÁÁÁÁÁÁÁÁÁ
3
ÁÁÁÁÁÁ15 ÁÁÁÁÁ317941 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� silencer R1/4 ÁÁÁÁÁ1ÁÁÁÁÁÁÁÁÁÁÁÁ
16ÁÁÁÁÁÁÁÁÁÁ
428617ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� connection piece aG1/4−iG1/4 90° L35 NW6ÁÁÁÁÁÁÁÁÁÁ
1ÁÁÁÁÁÁÁÁÁÁÁÁ
17 ÁÁÁÁÁÁÁÁÁÁ
417241 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� T−piece 1xaG1/4 −2xiG1/4 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
18 ÁÁÁÁÁÁÁÁÁÁ
394693 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� regulating valve G1/4 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
19 ÁÁÁÁÁÁÁÁÁÁ
255143 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� reducer aR1/4−iRp1/8 L11 ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁ20 ÁÁÁÁÁ201973 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� hose nozzle aR1/8 Di6 SW12 ÁÁÁÁÁ2ÁÁÁÁÁÁÁÁÁÁÁÁ
21ÁÁÁÁÁÁÁÁÁÁ
416700ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� hose clamp D8−12 DIN3017
ÁÁÁÁÁÁÁÁÁÁ
2ÁÁÁÁÁÁÁÁÁÁÁÁ
22ÁÁÁÁÁÁÁÁÁÁ
418900ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread−in ftg.−G−D06−M5−0000ÁÁÁÁÁÁÁÁÁÁ
2ÁÁÁÁÁÁÁÁÁÁÁÁ
23 ÁÁÁÁÁÁÁÁÁÁ
255164 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� male air coupling aR1/4 NW7,2 L33 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
24 ÁÁÁÁÁÁÁÁÁÁ
400192 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread−in ftg.−W−D06−R1/8−TURN ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
25 ÁÁÁÁÁÁÁÁÁÁ
418507 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread fitting −Y−D06−D06−CONN ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁ26 ÁÁÁÁÁ250323 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� hollow screw 1single G1/8 L27 ÁÁÁÁÁ1ÁÁÁÁÁÁÁÁÁÁÁÁ
27ÁÁÁÁÁÁÁÁÁÁ
460377ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� fitting 2x iG1/8ÁÁÁÁÁÁÁÁÁÁ
1ÁÁÁÁÁÁÁÁÁÁÁÁ
29 ÁÁÁÁÁÁÁÁÁÁ
414098 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� sealing ring 10x15x2 ÁÁÁÁÁÁÁÁÁÁ
5
ÁÁÁÁÁÁÁÁÁÁÁÁ
30 ÁÁÁÁÁÁÁÁÁÁ
289010 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� air−operated hose D6,0 d4,0 PUR silver ÁÁÁÁÁÁÁÁÁÁ
200 mm
ÁÁÁÁÁÁÁÁÁÁÁÁ
31 ÁÁÁÁÁÁÁÁÁÁ
289009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� air−operated hose D8,0 d5,7 PUR silver ÁÁÁÁÁÁÁÁÁÁ
3.000 mm
ÁÁÁÁÁÁ32 ÁÁÁÁÁ253671 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� hose grey type:801−6,3 ÁÁÁÁÁ1.500 mmÁÁÁÁÁÁÁÁÁÁÁÁ
33ÁÁÁÁÁÁÁÁÁÁ
400193ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� non−return restrictor valve GRLA−1/4−BÁÁÁÁÁÁÁÁÁÁ
1ÁÁÁÁÁÁÁÁÁÁÁÁ
34 ÁÁÁÁÁÁÁÁÁÁ
254813 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� coil hose, blue 1/4” L=2,5m ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁÁÁÁÁÁÁ
35 ÁÁÁÁÁÁÁÁÁÁ
788697 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� plug−type thread fitting −L−D08−D08 ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
38 ÁÁÁÁÁÁÁÁÁÁ
401203 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� safety valve 7,5bar 1/4 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁ39 ÁÁÁÁÁ255166 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� sealing ring R1/4 type:PDR−14 ÁÁÁÁÁ4ÁÁÁÁÁÁÁÁÁÁÁÁ
40ÁÁÁÁÁÁÁÁÁÁ
419180ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� cable channel 18x19 LF20020
ÁÁÁÁÁÁÁÁÁÁ
800 mmÁÁÁÁÁÁÁÁÁÁÁÁ
41ÁÁÁÁÁÁÁÁÁÁ
415978ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� blind rivet 4x10 large headÁÁÁÁÁÁÁÁÁÁ
4ÁÁÁÁÁÁÁÁÁÁÁÁ
42 ÁÁÁÁÁÁÁÁÁÁ
280085 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M6x35 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
44 ÁÁÁÁÁÁÁÁÁÁ
250009 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M4x8 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
4
ÁÁÁÁÁÁÁÁÁÁÁÁ
45 ÁÁÁÁÁÁÁÁÁÁ
250015 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M4x30 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
3
ÁÁÁÁÁÁ47 ÁÁÁÁÁ250092 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� washer D4,3 DIN125 type A ÁÁÁÁÁ7ÁÁÁÁÁÁÁÁÁÁÁÁ
48ÁÁÁÁÁÁÁÁÁÁ
261613ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M6x30 DIN912 SSTÁÁÁÁÁÁÁÁÁÁ
2ÁÁÁÁÁÁÁÁÁÁÁÁ
49 ÁÁÁÁÁÁÁÁÁÁ
250077 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� allan head cap screw M5x8 DIN912 SST ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
50 ÁÁÁÁÁÁÁÁÁÁ
255264 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� washer D5,3 DIN125 type A ÁÁÁÁÁÁÁÁÁÁ
2
ÁÁÁÁÁÁÁÁÁÁÁÁ
51 ÁÁÁÁÁÁÁÁÁÁ
411823 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� connection piece aG1/4−iG1/4 L21 NW7 ÁÁÁÁÁÁÁÁÁÁ
1
ÁÁÁÁÁÁ52 ÁÁÁÁÁ259432 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ� allan head cap screw M5x10 DIN912 SST ÁÁÁÁÁ1ÁÁÁÁÁÁÁÁÁÁÁÁ
60ÁÁÁÁÁÁÁÁÁÁ
729868ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� shim plate BM20/200 valveÁÁÁÁÁÁÁÁÁÁ
1ÁÁÁÁÁÁÁÁÁÁÁÁ
61 ÁÁÁÁÁÁÁÁÁÁ
411937 ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
� screw plug G1/4 DIN908 ÁÁÁÁÁÁÁÁÁÁ
1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the document index and on the ID plate)must be considered.
BM 200 EASY with Gear Pump74
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
448684F
max. 0,5 bar
max. 8,0 bar
1
2
3
4
max.7,5 bar5
Fig. 38 Indication signs
Indication Signs
BM 200 EASY with Gear Pump 75
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 448684 Indication sign, BM pneumatic, complete 1 - -
1 207723 � Sign, lifting O lowering, self-adhesive 1
2 207001 � Sign, two-hand control, self-adhesive 2
3 417710 � Sign, ”max. 8,0 bar” 1
4 417708 � Sign, ”max. 0,5 bar” 1
5 417728 � Sign, “max. 7,5 bar” 1
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump76
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
203990.02
7
31 2
7 5
2 4 5 4 5 4 6
4
6
5
4
46
6
2
Fig. 39 Cable channel
Cable Channel
BM 200 EASY with Gear Pump 77
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 203990 Cable channel, complete 1 - -
1 203984 � Pipe, 25x1.5x1280, double side, a=M25x1.5 1
2 461733 � Lock nut, metal, metric M25x1.5 5
3 203985 � Pipe, 25x1.5x500, single side, a=M25x1.5 1
4 203999 � Pipe clamp, Di1/2” 10
5 461141 � Threaded bolt, M8x25 5
6 203988 � Rubber socket, type:129M, ID=25, L=27.5 5
7 203986 � Pipe, 25x1.5x500 2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump78
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
203991.02
7
31 2 2 4 5 4 5 4 6
4
6
5
6
2
8
Fig. 40 Cable channel
Cable Channel
BM 200 EASY with Gear Pump 79
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 203991 Cable channel, complete 1 - -
1 203984 � Pipe, 25x1.5x1280, double side, a=M25x1.5 1
2 461733 � Lock nut, metal, metric M25x1.5 5
3 203985 � Pipe, 25x1.5x500, single side, a=M25x1.5 1
4 203999 � Pipe clamp, Di1/2” 4
5 461141 � Threaded bolt, M8x25 3
6 203988 � Rubber socket, type:129M, ID=25, L=27.5 3
7 203986 � Pipe, 25x1.5x500 1
8 201635 � Pipe clamp, Di40 2
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
BM 200 EASY with Gear Pump80
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
003032_F
-61N3
-5F1
-12N6
-13N2
-13N6
-14N2
-14N6
-15N2
-15N6
-76T1
-76T3
-81A1
-1F1
-1F3
-9F1
-5N4
-5N1
-15F2
-9N1
-11N2
-12N2
-11N6
-61F3
-14F2
-13F2
-12F2
-11F2
-1R6
Fig. 41 Electric compl. (electr. cabinet) Mounting plate (part 1)
Electric Complete (Electr. cabinet) Mounting Plate
BM 200 EASY with Gear Pump 81
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
-1F1 446373 Main circuit breaker, 63 A / 3 pole 1 - -
-1F3 254251 Circuit breaker, 10 A / 2 pole 1 - -
-1R7 250532 Varistor 1 - -
-5F1 254244 Circuit breaker, 50 A / 3 pole 1 - -
-5N1
-5N4
254184 Solid state relay 50 A
� Cooling body
� Cover
2 - -
-9F1 457991 Circuit breaker, 10 A 1 - -
-9N1 207396 Solidstate relay, 15 A 1 - -
-11F2 457991 Circuit breaker, 10 A 1 - -
-11N2
-11N6
207396 Solid state relay 15 A 2 - -
-12F2 457991 Circuit breaker, 10 A 1 - -
-12N2
-12N6
207396 Solid State Relay 15 A 2 7 2
-13F2
-14F2
-15F2
457991 Circuit breaker, 10 A 3 11 6
-13N2/-13N6
-14N2/-14N6
-15N2/-15N6
207396 Solid state relay 15 A 6 11 6
-61F3 456986 Circuit breaker, 16 A 1 5 11 - 14
459262 Circuit breaker, 20 A 1 5 50 - 53
-61N3 783276
-
Assembly WS0370, speed control, PR pump
� Ferrite for drive
1
1
5 11 - 14
785780
-
Assembly WS0370, pressure control, PR pump
� Ferrite for drive
1
1
5
9
11 - 14
D
785861
-
Assembly WS1500, speed control, PU pump
� Ferrite for drive
1
1
5 50 - 53
785860
-
Assembly WS1500, pressure control, PU pump
� Ferrite for drive
1
1
5
9
50 - 53
D
-76T1 403985 Power supply, 24 VDC / 150 W 1 - -
-76T3 403986 Power supply, 24 VDC / 75 W 1 - -
-81A1 411838 Temperature control module (NI120), CS20
� Fuse, 1 A (refer to Kits)
1
2
- -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the document index and onthe ID plate) must be considered.
NOTE Refer to Notes in this section for item information.
NOTE Beginning 05/2005 the connection designation of all circuit breakers will be changed. New circuit breakers will bemarked with Xpole. See Fig. 46.
Continued on next page
BM 200 EASY with Gear Pump82
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
-XLWZ
-XL9-XL10
-XLR
-XL8
-XLWT
-161K6
-82A1
-111A2
-121A2
-XL0
-XL12
-XL11
-81B1
-91A1
-XLS1
-XLP-XLD
-101A3
003032
-XL12
-102K2
-133K2
Fig. 42 Electric complete (electr. cabinet) Mounting plate (part 2)
Electric Complete (Electr. cabinet) Mounting Plate(contd.)
BM 200 EASY with Gear Pump 83
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
NOTE: Refer to Notes in this section for item information.
Item P/N Description Quantity Box Code
-81B1 411841 Reference temperature sensor, CS20 1 - -
-82A1 411838
-
Temperature control module, CS20
� Fuse, 1A (refer to Kits)
1
2
11 6
-91A1 783413 Central processing unit, standard, CS20B
� Fuse, 6.3A (refer to Kits)
� Fuse, 1A (refer to Kits)
1
2
3
- -
783495 Central processing unit, CS20B, PROFIBUS
� Fuse, 6.3A (refer to Kits)
� Fuse, 1A (refer to Kits)
1
2
3
10 P
-101A3 207744 EASY module progr. two-handed operation 1 - -
-102K3 729054 Two hand relay 24V DC ESR4−NZ−21 1 - -
-111A2 292287
-
Analog module, pressure control, CS20
� Fuse, 1A (refer to Kits)
1 9 D
-121A2 400816 Motor module, CS20
� Fuse, 1A (refer to Kits)
1
2
- -
-133K2 285332 Relay MY4N−D2/24V DC w/indicating lamp 1 - -
263998 Relay socket 4−pole PYF−14A−E
261991 Retaining clip f. Relay
-161K6 7110781 Contactor DILMC65(RDC24) 1 - -
7116747 Slave contactor block DILM150−XHI11
— 290184 Termination plug, CS20 2 - -
— 290185 Ribbon Cable, 110 mm 1 9
11
D
6
— 290186 Ribbon Cable, 200 mm 1 - -
— 290187 Ribbon Cable, 800 mm 1 - -
— 318899 Ribbon Cable, 1600 mm 1 - -
-XLWT
-XLWZ
Warning light kit compl. (P/N 785730)
Week timer/clock kit (P/N 729710)
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
NOTE Refer to Notes in this section for item information.
BM 200 EASY with Gear Pump84
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
-133S2-133S4-133S5
-1Q1
-1E7
-95A2
-95A5-76K7
-5B6
-1E4
-1T1
-9E1-9E2
-9B7
-61M5
-9E1-9E2
-9B7
003033_F
Fig. 43 Other electrical components (part 1)
Other Electrical Components
BM 200 EASY with Gear Pump 85
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
-1E4 316453 Fan, compl. 1 - -
464644 � Filter element 4 - -
-1E7 316453 Fan, compl. 1 3 4 - 5
464644 � Filter element 4
-1Q1 256567 Main switch, 3 x 100 A 1 - -
-2T3 461697 Transformer 400 V, 40 KVA 1 3 4 - 5
-5B6 120167 RTD sensor, platen (refer to Heating Punch/Melt Platen (smooth) orHeating Punch/Melt Platen (Finned, Hot Melt) )
1 - -
-9B7 120167 RTD sensor, pump heating(refer to Adapterplate for Gear Pumps PR..or Gear Pumps PU..)
1 - -
-9E1-9E2
250691 Heater Cartridge(refer to Adapterplate for Gear Pumps PR..)
2 5 11 - 14
263242 Heater Cartridge(refer to Gear Pumps PU..)
2 5 50 - 53
-61M5 785866 AC Drive motor / gear box(refer to Drive WS0370/PR)
1 5 11 - 14
401739 AC Drive motor / gear box(refer to Drive WS1500/PUS)
1 5 50 - 53
-76K7 729710 Week timer/clock kit 1 Accessory
-95A2 292273 Control panel, CS20, 1 pump
� Fuse, 1A (refer to Kits)
1
2
- -
-95A5 411842 Temperature control panel, CS20
� Fuse, 1A (refer to Kits)
1
1
- -
- 458560 Level switch, compl. 1 - -
-133S2 411671 � Microswitch (refer to Switch Rod) 1
-133S4 411671 � Microswitch (refer to Switch Rod) 1
-133S5 411671 � Microswitch (refer to Switch Rod) 1
- 411672 � Cover for microswitch 3
-134H5 - Indicator light, PROFIBUS 1 10 P
460767 � Lamp holder front side
460768 � Mounting adapter
460771 � Led lamp white
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
NOTE Refer to Notes in this section for item information.
Continued on next page
BM 200 EASY with Gear Pump86
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
-134S3
-102S5
-102S3
-150B6
-151S3-192B2
-164H1
-162Y5
-161S2
003034_F
-134H5
Fig. 44 Other electrical components (part 2)
Other Electrical Components(contd.)
BM 200 EASY with Gear Pump 87
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
-134S3 - Key lock switch, PROFIBUS 1 10 P
460766 � Key lock switch
460768 � Mounting adapter
460769 � Contact block, NO
460770 � Contact block, NC
-150B6 251992 Proximity switch, 24-240VAC/24-210VDC(refer to Device, Drum Inserted)
1 - -
-102S3
-102S5
394050 Two-handed control circuit 2 - -207586 � Push button460768 � Mounting adapter460769
460770
� Contact block, NO
� Contact block, NC
-151S3 207585 Selector switch 1 - -460768 � Mounting adapter460769
729818
� Contact block, NO
� LED, green
-161S2 271936 Over temp thermostat, 150°C/300°F - 6 L
271929 Over temp thermostat, 177°C/350°F - 6 M
271937 Over temp thermostat, 230°C/450°F - 6 H
-162Y5 254248 Solenoid valve, 4/2-ways, 24V/5.9W, G1/8, cpl.(refer to Installation Kit)
- 2 A,B,F,G
-164H1 785730 Warning light kit, compl. - Accessory
267834 � Indicator lamp, 4W, 24V, BA15D 4
400181 � Indicator lamp, red 1
400182 � Indicator lamp, green 1
400183 � Indicator lamp, clear 1
408456 � Indicator lamp, yellow 1
- � Adaptor and cover 1
- � Foot 1
-192B2 207125 Pressure sensor, 100 bar 1 9 D
291430 Cable, Pressure sensor 1
285344 � Cable socket
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
NOTE Refer to Notes in this section for item information.
Continued on next page
BM 200 EASY with Gear Pump88
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
-XS14
-XS13
-XS12
-XS10
-XS11key
003035_F
-XS2a
-XS5
-XS2
Fig. 45 Other electrical components (part 3)
Other Electrical Components(contd.)
BM 200 EASY with Gear Pump 89
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Pos. P/N Description Quantity Box Code
-XS2 7104762 XS2 Plug, 90 degree angled 1 - -
-XS2a 418760 Cable housing 1 10 P
254979 Socket housing
-XS5 - XS5 tacho electrical plug 1 - -
252296 � Cable plug, 3+E pin
252289 � Socket, 3+E pin
-XS10 - Hose / Gun plug #1 1 - -
788924 � Socket housing 1
255606 � Socket insert 1
- � Conduit fitting 1
- � Crimp contacts 11
-XS11 - Hose / Gun plug #2 1 7 2
788924 � Socket housing 1
255606 � Socket insert 1
- � Conduit fitting 1
- � Crimp contacts 11
-XS12
-XS13
-XS14
- Plug for add. temperature channels - 11 6
255016 � Socket housing 3
255606 � Socket insert 3
- � Crimp contacts 24
key 785797 Key for control box 1 - -
NOTE To identify the configurable components/parts, the configuration code (box/code, located in the documentindex and on the ID plate) must be considered.
NOTE Refer to Notes in this section for item information
BM 200 EASY with Gear Pump90
� 2006 Nordson CorporationAll rights reserved
BM 200 EASY GPIssued 02/06
P/N 397176J
Item P/N Description Quantity Box Code
— 464651 Spare parts kit CS20 fuses 1 - -
— - � Fuse, 6.3A 5
— - � Fuse, 1A 10
Beginning 05/2005 the connection designation of all circuit breakers willbe changed. New circuit breakers will be marked with Xpole.
2
1
4
3
6
5
Xpole
1
2
3
4
5
6
old new
...:
1
...:
1
Fig. 46 Connection designition (Replacement of an old circuit breaker with a new one)
Kits
Circuit Breaker ConnectionDesignation