Post on 17-Nov-2021
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
Template
Quilt Diagram
L L L L L L
Large CircleTrace 14
(6) Fabric F(4) Fabric H(4) Fabric A
Enlarge Templates 200%
Small CircleTrace 12
(4) Fabric G(4) Fabric I(4) Fabric J
Square shouldmeasure 1” AFTER
enlarging templates200%
the quilt shown is a digital representation. actual fabric repeats will vary from design shown.
Full pattern/instructions
available for download
in April 2018 at
www.benartex.com
© 2
018,
Hei
di P
rid
emo
re fo
r B
enar
tex,
LL
C
circles and angles, blue and white - mix them together for a truly
sophisticated design! a great way to show off Kanvas’
blue brilliance collection.
by heidipridemore
SAMPLE KEY/SKU QTY CUT CUT PIECES VIA WOFBLOCK ASSEMBLY PROJECT USES PRECISE 1/4” SEAMS. TEST YOUR SEAM ALLOWANCE BY CUTTING (2) 2-1/2” X 5” RECTANGLES. STITCH THEM TOGETHER ALONG THE 5” LENGTH. AT THE MIDPOINT, MEASURE ACROSS THE UNIT. IT SHOULD BE EXACTLY 4-1/2” WIDE. IF NOT, ADJUST YOUR SEAM ALLOWANCE AND REPEAT.
BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM
FINISHED SIZE: 52” x 64”
FINISHING Cut batting and backing 3” larger than top on all sides. Layer backing, batting and top together and baste or pin. When quilting is completed, trim excess batting and backing. Bind as usual.
A
C
E
G
I
K
M
B
D
F
H
J
L
Shimmering Basket Weave8812P-09 White
Packed Shimmer Flowers8811P-09 White
Shimmer Basket Weave 8812P-52Medium Blue
Shimmer Dots8807P-50Light Blue
Shimmer Leaves8806P-55Navy
Etched Pearl Flowers8814P-09White
Pearl Drop8813P-55Navy
Shimmering Swirl 8808P-55Navy
Shimmer Dots8807P-55Navy
Blue Brilliance Floral 8805P-55 Dark Blue
Shimmer Diamonds8810P-09 White
Shimmer Leaves8806P-09 White
Colors for Quilters 3000H-09White
(3) 4-7/8” x WOF strips, sub-cut (24) 4-7/8” squares.(3) 2-1/2” x WOF strips, sub-cut (48) 2-1/2” squares.See instructions to cut (4) large circles.
(2) 4-7/8” x WOF strips, sub-cut (12) 4-7/8” squares.(6) 2-1/2” x WOF strips, sub-cut (96) 2-1/2” squares.
(3) 4-7/8” x WOF strips, sub-cut (24) 4-7/8” squares.
See instructions to cut (4) small circles.
See instructions to cut (4) small circles.
(2) 8-1/2” x 64-1/2” LOF strips.
(6) 2-1/2” x WOF strips, BINDING
(3) 4-7/8” x WOF strips, sub-cut (24) 4-7/8” squares.(3) 2-1/2” x WOF strips, sub-cut (48) 2-1/2” squares.
(2) 4-7/8” x WOF strips, sub-cut (12) 4-7/8” squares.(2) 2-1/2” x WOF strips, sub-cut (24) 2-1/2” squares.
See instructions to cut (6) large circles.
See instructions to cut (4) large circles.
See instructions to cut (4) small circles.
(10) 2-1/2” x WOF strips*
* SEW STRIPS VIA SHORT ENDS THEN GO TO BORDER ASSEMBLY WOF/LOF=WIDTH/LENGTH OF FABRIC
7/8 yd
1/2 yd
3/8 yd
1/4 yd
1/4 yd
1 yd
1 yd
7/8 yd
1/2 yd
1/4 yd
1/4 yd
2 yds
1/2 ydNote: If this Benartex pattern is included in a kit, any questions about the kit should be addressed to the vendor from whom you bought it.
Block 29. Following the manufacturer’s instructions, trace the listed number of each template onto the paper side of the fusible web. Roughly cut out each template about 1/8” outside the drawn lines.
10. Press each template onto the wrong side of the fabrics as listed on the templates. Cut out each template on the drawn lines.
11. Arrange and press the (7) large circles and (6) small circles onto (1) K 8-1/2” x 64-1/2” strip.
12. Finish the raw edges of each shape with a decorative stitch such as a buttonhole or satin stitch to make (1) Block Two strip.
13. Repeat Steps 11-12 to make a second Block Two strip.
Unit 1make 48
A
B
Unit 2make 24
E
D
Unit 3make 24
E
C
Unit 4make 24
Unit 1
C
D
Block 11. Place (1) B 4-7/8” square on top of (1) A 4-7/8 square, right sides together. Draw a line across the diagonal of the top square. Sew 1/4” away from each side of the drawn diagonal line. Cut the (2) squares apart on the drawn diagonal line to make (2) half-square triangles. Trim the blocks to measure 4-1/2” square to make (2) Unit 1 blocks. Repeat to make (48) Unit 1 blocks total.
2. Repeat Step 1 using (12) D 4-7/8” squares and (12) E 4-7/8” squares to make (24) 4-1/2” Unit 2 blocks.
3. Repeat Step 1 using (12) C 4-7/8” squares and (12) E 4-7/8” squares to make (24) 4-1/2” Unit 3 blocks.
4. Place (1) D 2-1/2” square on the top left corner of (1) Unit 1 block, right sides together. Sew across the diagonal of the small square from the upper right corner to the lower left corner. Flip open the triangle formed and press. Trim away the excess fabric from behind the triangle 1/4" away from the sewn seam.
5. Follow diagram for the seam direction to add a C 2-1/2” square to the lower right corner of the Unit 1 block to make (1) Unit 4 block.
6. Repeat Steps 4-5 to make (24) Unit 4 blocks total.
Unit 5make 24
Unit 1
C
C
Unit 6make 24
Unit 2
CB
A
Unit 7make 24
Unit 3
B
A
Block Onemake 12
Unit 4 Unit 5
Unit 4 Unit 5
Unit 6
Unit 6
Unit 7
Unit 7
A
J
J
A
G
H
H
G
K I
I
F
F
F
Block Twomake 2
7. Repeat Steps 4-5 and use the diagrams below for fabric identification, location and seam direction to make (24) Unit 5 blocks, (24) Unit 6 blocks and (24) Unit 7 blocks.
8. Sew (2) of each block, Units 4-7 together into a 2 x 8 matrix to make (1) Block One strip. Repeat to make (12) Block One strips total.
15. Sew together (4) Block One strips, end to end to make (1) Pieced Column, refer to Quilt Diagram. Repeat to make (3) Pieced Columns total. 16. Sew the (6) sashing strips, (3) Pieced Columns and (2) Block Two strips together as shown in the Quilt Diagram to make the quilt top.
Quilt Assembly14. Make sashing by sewing (10) L 2-1/2” X WOF strips together via short ends using a straight seam. Cut (6) 2-1/2” x 64-1/2” strips for sashing.