Post on 10-Apr-2015
ITEM NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PART NUMBER Male Side Shell 28000_external_linear(None) Motor Cap Female Blade Copper Washer Plastic Copper Washer Holder Plastic Holders Rubber Washer Bottom Rubber Washer Top Motor Cap Male Metal Revolve Female Side Shell BottomShell Button Libre Electric Box 14 15
Material ABS ABS Stainless Steel Copper ABS ABS Rubber Rubber 1060 Alloy Chrome Stainless Steel ABS ABS ABS Hardened Steel 1060 Alloy 16 2
QTY. 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1
3 1 9 7 8 12 10 5 6 4
11 13
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Hand Blender AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
BOM for Exploded View
Material:
Weight: g
Scale: 1:7
Sheet 1 of 27
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Hand Blender AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Main Body P
Material:
Weight: g
Scale: 1:5
Sheet 2 of 27
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Hand Blender AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Blender View
Material:
Weight: g
Scale: 1:5
Sheet 3 of 27
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Hand Blender AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Model View
Material:
Weight: g
Scale: 1:5
Sheet 4 of 27
DETAIL C SCALE 2 : 1
C
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Hand Blender AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Cut Away View
Material:
Weight: g
Scale: 3:1
Sheet 5 of 27
10 0.50 5 20 20 15 20 30 20
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Button AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Button Assem
Material:
Weight: g
Scale: 1:1
Sheet 6 of 27
12
7
9
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Motor AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Motor Assem Dim
Material:
Weight: g
Scale: 1:1
Sheet 7 of 27
15 8
R1
7 20
5
2 2
10
5Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Shaft AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Shaft Assem
Material:
Weight: g
Scale: 1:2
Sheet 8 of 27
N
N SECTION N-N
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Shaft AssemblyDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Shaft Sectional
Material:
Weight: g
Scale: 1:1.5
Sheet 9 of 27
60 13 20
30 115 20 55Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED NameDrawnSharon Brosnan
160
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Male Side ShellDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Male Side Blender
Material:
Weight: g
Scale: 1:2
Sheet 10 of 27
60
21
20 55Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED NameDrawnSharon Brosnan
160
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Female Side ShellDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Female Side Blender
Material:
Weight: g
Scale: 1:2
Sheet 11 of 27
10
38
20
58 25
200
25
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
BottomShellDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Bottom Shell
Material:
Weight: g
Scale: 1:2
Sheet 12 of 27
SECTION I-I SCALE 1 : 1
Unless otherwise specified dimensions are in I millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
BottomShellDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Bottom Shell Sec
Material:
Weight: g
Scale: 1:5
Sheet 13 of 27
5
0.50
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
ButtonDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Button
Material:
Weight: g
Scale: 2:1
Sheet 14 of 27
21.15
16.50
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
28000_external_linear(Non e)DWG. NO. REV.
Motor
Material:
Weight: g
Scale: 2:1
Sheet 15 of 27
1
6
7 8
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Motor Cap MaleDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Motor Cap Male
Material: 1060 Alloy
Weight: 0.49g
Scale: 5:1
Sheet 16 of 27
3.57
9
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Motor Cap FemaleDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Motor Cap Female
Material: ABS
Weight: 0.50g
Scale: 5:1
Sheet 17 of 27
6 5
1
266
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Metal RevolveDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Metal Revolve
Material: Chrome Stainless Steel Weight: 40.70g
Scale: 1:2
Sheet 18 of 27
R1
27
22 R1
1
20
5 14
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
BladeDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Blade
Material: 1060 Alloy
Weight: 0.93g
Scale: 1:2
Sheet 19 of 27
5 2
5 7 19
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Copper WasherDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Copper Washer
Material: Copper
Weight: 5.54g
Scale: 2:1
Sheet 20 of 27
15
20
20
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Electric BoxDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Electric Box
Material: 1060 Alloy
Scale: 2:1
20Weight: 16.20g
Sheet 21 of 27
4
15
20
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Plastic Copper Washer HolderDWG. NO. REV.
Plastic Copper Washer
Material: 1060 Alloy
Weight: 0.91g
Scale: 2:1
Sheet 22 of 27
6
9
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Plastic HoldersDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Plastic Holders
Material: 1060 Alloy
Weight: 0.10g
Scale: 2:1
Sheet 23 of 27
15
5 6
7 9Date 29/04/2009
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Rubber Washer BottomDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Rubber Washer Bottom
Material:
Weight: g
Scale: 2:1
Sheet 24 of 27
L
L
SECTION L-L SCALE 5 : 1
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Rubber Washer BottomDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Rubber Sect
Material:
Weight: g
Scale: 2:1
Sheet 25 of 27
15
2
3
7 9
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
Rubber Washer TopDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Rubber Washer Top
Material:
Weight: g
Scale: 2:1
Sheet 26 of 27
Unless otherwise specified dimensions are in millimetres. Tolerances are:XXX (0 PLS) 0.5 MM XX.X (1 PLS) 0.1 MM X.XX (2 PLS) 0.03 MM .XXX (3 PLS) 0.007 MM UNLESS OTHERWISE NOTED
NameDrawnSharon Brosnan
Date 29/04/2009
University of LimerickSIZE A4 Title:
ID
0651869
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
SpringDWG. NO. REV.
Sheet Name:
ANGLE TOLERANCE 0 30', UNLESS NOTED
Spring
Material:
Weight: g
Scale: 2:1
Sheet 27 of 27