Transcript of Biosorption Process For Removal and Recovery of Heavy and Precious Metals from Aqueous Solutions:...
- Slide 1
- Biosorption Process For Removal and Recovery of Heavy and
Precious Metals from Aqueous Solutions: Past, Present and Future Dr
J. Paul Chen Department of Chemical & Environmental Engineering
National University of Singapore, Singapore Presented at
International Symposium on Water Resources Wuhan, China November 9,
2003
- Slide 2
- Outline of Presentation Motivation Historical background
Current development Application Mechanisms Future trends
Summary
- Slide 3
- Major Industries in Singapore Originally 7 islands of total
area of 900ha Reclamation efforts: 2,650ha in 2001, to increase to
3,200ha in 2003 55 companies on site (e.g. DuPont, Chevron,
Celanese, ExxonMobil, Eastman, Sumitomo) Target output from
chemical industries: S$75 billion by 2010 Jurong Island: Integrated
Petrochemical Hub 1S$=4.75 RMB
- Slide 4
- Why do we care about metal contamination ? Human activities and
natural processes inevitably would produce metal wastes. Typical
industries are metal-plating and metal-finishing operations, e.g.
semiconductor mining and ore processing operations, metal
processing, battery and accumulator manufacturing operations,
thermal power generation (coal-fired plants in particular), nuclear
power generation, Military practices, e.g. U Naturally occurring
metal wastes include arsenic and arsenite.
- Slide 5
- Why do we care... metal ? Contd EPAs have become more concerned
the impacts. In the USA, important regulations are Cu-Pb and As
rule (new ruling of 10-ppb AS in drinking water in 2001) Searching
cost-effective technologies becomes crucial. Technologies:
Precipitation, adsorption, ion exchange, electro-coagulation,
electrochemical reduction, membrane filtration However, the costs
and efficiencies still remain as a major concern.
- Slide 6
- Affinity of metal with organics L-2-Aminopropanoic Acid
(Alanine) with various metal Log K Ca 2+ 1.30 Co 2+ 4.31 Ni 2+ 5.36
Cu 2+ 8.11 Zn 2+ 4.58 Cd 2+ 3.98 Pb 2+ 4.15 Metal Ions 1.
Immobilization of organics; 2. use of organics in natural
biosolids
- Slide 7
- Historical background: 1980-1995 Biosorption by the materials
derived directly and/or indirectly by various organisms has long
recognized However, the applications of biosorption started to
appear in scientific literatures in early 1980s. Credit - One of
earlier researchers, B. Volesky of McGill Univ., had contributed
significantly by publishing a series of papers, mainly on screening
of biosorbents and measurement of biosorptive capacities.
- Slide 8
- What is biosorption ? Biosorption is a property of certain
types of inactive/active organisms to bind and concentrate heavy
metals from even very dilute aqueous solutions. Biosorbents can be
classified into: a. Inactive organisms (mainly) include algae,
fungi and bacteria b. Their derivatives which are termed as
biopolymers. Opposite to biosorption is metabolically driven active
bioaccumulation by living substances.
- Slide 9
- What are typical biosorbents ? Some of the biomass types come
as a waste by-product of large-scale industrial fermentations (the
mold Rhizopus, the bacterium Bacillus subtilis and waste activated
sludge). Other metal-binding biomass types, certain abundant
seaweeds (particularly brown algae e.g. Sargassum, Ecklonia ), can
be readily collected from the oceans. Biopolymers are normally
extracted from inactive organisms and processed before use (e.g.
Ca-Alginate) These biosorbents can accumulate in excess of 25% of
their dry weight in deposited metals: Pb, Ag, Au, U, Cu.
- Slide 10
- Case presents Raw seaweeds collected in Singapore Ca-alginate
beads Ca-alginate based ion exchange resin (CABIER)
- Slide 11
- Examples: Marine Algal collected in Singapore Padina sp.
Sargassum sp.
- Slide 12
- Why biosorption ? Cu sorption
- Slide 13
- Characterization of biosorbents by instrumental analysis
Fourier transform infrared spectroscopic (FTIR) and X-ray
Photoelectron Spectroscopic (XPS) studies show that biosorbents
have significant amount of COO, OH, C=O, and C-O. These organic
functional groups would be responsible for metal uptake onto the
biosorbents due to the high affinity for metal ions. SEM shows less
pore development in bisorbents
- Slide 14
- Biosorption Equilibrium
- Slide 15
- Metal biosorptive properties: pH effect SOH + M m+ = SO-M m+ +
H + Sargassum Ca-alginate
- Slide 16
- Metal biosorptive properties: pH effect Metal biosorptive
properties: ionic strength effect
- Slide 17
- Algae as the biosorbents
- Slide 18
- Mechanisms of metal biosorption Instrumental investigations
through XPS, FTIR, titration and equilibrium experiments reveal
that the biosorption is a complex chemical phenomenon. Depended on
the types of bisorbents applied, the metal uptake may be due to:
metal surface complex formation (MSCF) ion exchange, and elementary
coordination
- Slide 19
- XPS spectra of Pb- and Cu-adsorbed CABIER -O-M-O-
- Slide 20
- XPS Analysis Note that BE values of 577.2 and 579 represent Cr
(III) and Cr (VI) Uptake reduction and MSCF Raw Padina Cr(VI): pH 1
Cr(VI): pH 2Cr(III): pH 4 577.1 578.5 577.2 579.2 579.5 577.5
- Slide 21
- biosorption of Metal Ions: Surface Complex Formation Model
biosorption results from reactions between functional groups of
adsorbents and metal ion species.
- Slide 22
- Two-pK Triple-Layer Model - MSCF M=Cu, or Zn, or Co, X=Cl, or
NO 3, or ClO 4 y o =e o / kT and y =e / kT referred to o-layer and
-layer
- Slide 23
- MSCF for Cu biosorption by Ca-alginate beads Chen, J.P., et
al., Environmental Science and Technology, Vol. 31, No. 5, pp.
1433-1439, 1997.
- Slide 24
- Conceptual model for the metal removal by ion exchange. + Ca 2+
M = Cu and Pb
- Slide 25
- Ion exchange in biosorption (e.g. by CABIER) 1. M 2+ + Ca-R M-R
+ Ca 2+ (ion exchange) 2. M 2+ + R 2- M-R (R: unreacted group)
(elementary coordination) 3. 2H + + Ca-R H 2 -R + Ca 2+ (pH effect)
and 4. solution and precipitation reactions.. Chen, J.P. et al.,
Langmuir, Vol. 18, No. 24, pp. 9413-9421, 2002.
- Slide 26
- Prediction of pH Effect on Metal Removal by CABIER [Pb] o = 1.0
10 -4 M, m=1 g/L, [Cu] o =1.0 10 -4 M, m=0.15 g/L. modeling
- Slide 27
- Prediction of Competitive Biosorption by CABIER
- Slide 28
- Generalized approach for the simulations- MINEQL Solution
Reactions: Adsorption Reactions: Precipitation Reactions: EDL
- Slide 29
- Solution and Precipitation Reactions in the Modeling Chen, J.P.
and Lin, M.S. Water Research, Vol. 35, No. 10, pp. 2385-2394,
2001.
- Slide 30
- How about modeling for metal reduction ? NO solution yet !!! It
is on-going; but we may have hard time !!!
- Slide 31
- Bisorption Kinetics
- Slide 32
- Biosorption kinetics: four types of seaweeds vs. novel CABIER
seaweeds CABIER
- Slide 33
- Sorption Kinetics of Metal Ions: Diffusion-Controlled Model
Model Parameters Rate-controlling mechanism (i.e.,
transport-controlled or reaction-controlled cases) Rate parameters
(i.e., diffusion and mass transfer coefficients or rate constants)
Characterization of sorbents Sorption rate results from either mass
transfer of ion species to the surface of sorbents or complexation
reactions between functional groups of sorbents and ion
species.
- Slide 34
- An Intraparticle Diffusion Model for Metal Uptake Kinetics
- Slide 35
- kinetics of metal biosorption
- Slide 36
- Engineering applications
- Slide 37
- Continuously operated system for metal treatment an engineered
approach Kinetics: external mass transfer and internal diffusion
Equilibrium: capacity as function of chemistry and adsorbents
Mixing: dispersion and advection Batch/CSTR ? Fixed-bed ?
Fluidized-bed ?
- Slide 38
- Continuously operated fluidized-bed
- Slide 39
- Major obstacles and challenges Reluctance to use by industries
Organic leaching Waste biosorbent disposoal Physical properties
Optimization of specific biosorption process
- Slide 40
- Prevention of TOC leaching-most recently development Organic
leaching has been extremely if raw seaweeds are used. formaldehyde
has been used for surface modification and the resulting TOC
significantly reduces to below 5 ppm The biosorptive capacity
increases and pH becomes more stable.
- Slide 41
- Summary Biosorption of metals becomes more attractive due to
high removal capacity, high kinetics, low cost and possibility to
recover metals. Biosorption is highly depended on pH. Various
mechanisms lead to the metal uptake. Kinetics is mainly controlled
by diffusion. Various reactor configurations can be used.
Challenges still remain in the way leading to full- scale
industrial application.
- Slide 42
- acknowledgement Professor Sotira Yiacoumi of Georgia Tech
Professor L. Hong of NUS for XPS and FTIR Post-graduate students in
NUS: Dr S.N. Wu Ms J. Peng Ms L. Wang Mr P.X. Sheng Mr L. Yang Ms.
LH Tan