Post on 20-Feb-2021
1Bio3 Implants |1
Bio3 Implants
Premium Tapered Implants Range
CONTENT
04 Bio3 Implants Сompany
08 Progressive Implant
14 Advanced Implant
22 Healing Сaps
24 Cover Screw Healing Caps
25 Straight Anatomic Abutment
26 Straight Abutment
27 Angulated Anatomic Abutment 15°
28 Angulated Anatomic Abutment 25°
29 Screw Retained Abutments
31 Angulated Multi-Unit 17°
32 Angulated Multi-Unit 30°
36 Ball Attachments
37 Locators
38 Titanium Basis with a Burned-out Plastic Sleeve
40 Prosthetics for CAD/CAM
43 Burned-out Abutment
44 Laboratory Analog, Transfer for Bio LINE, Plastic transfer-cap
45 Impression Removal Transfers
48 Bio Line Healing Caps
52 Bio Line Straight Abutments
56 Bio Line Anglulated Abutments
60 Bio3 Surgical Kit
62 Bio3 Guide Surgical Kit
66 Instruments, Implant Drivers, Adapters
67 Wrenches and Stoppers, Surgical Tapered Drills
68 Bone Taps
70 Material for bone regeneration Bio3 BONE
71 Bio3 PENGUIN
74 Bio3 VITAMIN COMPLEX
75 Bio3 IMPLANT CARE FOAM
Bio3 IMPLANTCARE FOAM
Bio3 PENGUINMONITOR OSSEOINTEGRATIONsee page 71
see page 75
MATERIAL FOR BONE REGENERATION BIO3 BONE
Bio3 VITAMIN
OUR
PROD
UCTS
see page 74
see page 70
4
Bio3 Implants Сompany
Your customer’s smile is our mutual success!
Bio3 Implants – is a dedicated team of professionals in dentistryand implantology with 20 years’ experience
Bio3 Implants | World Map
Pre
miu
m D
enta
l Im
plan
ts
AlbaniaArmeniaAzerbaijanBahrainBelgiumVietnamFranceGermanyGreeceEgyptIndonesiaKazakhstanKosovoKuwaitJordanIraqIranLebanonLatviaNorth Macedonia
MongoliaMoroccoNigeriaUnited Arab EmiratesOmanPakistanPolandRussiaSaudi ArabiaSudanSpainSyriaTaiwanTadjikistanTunisiaTurkeyUgandaUkraineUnited KingdomBBi
oio3
IMPL
ANTS
3 IM
PLAN
TS
5Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Bio3 Implants GmbH is a German company, which offers the dentists the best solutions of the highest quality and accuracy in implantology. We develop, produce and implement reliable and quality implant systems of premium line with conical connection.
Bio3 Implants team tends to make implantation simple, easy, high-quality and highly gentle for the patient. To achieve this goal the company develops innovative premium quality products as well as provides its customers with a high standard service.
Bio3 Implants main benefits: Precision conical connection Customers support 24/7 Bio3 ACTIVE surface Life-time warranty
Reliability and quality Bio3 Implants conducts continuous and systematic quality control of all products which is confirmed
by international quality standards ISO13485:2016, 2797.During the past years the company extended its production with the most advanced high-tech equipment.
Technological cycle of Bio3 Implants production is ensured by high standards of German quality. All products go through several stages of quality control.
Identification and warranty Each Bio3 Implants product is assigned with a unique serial number that allows tracking the history
of the product manufacturing from the first to the final stage. Bio3 Implants provides a lifetime warranty on all its products. Each implant includes Warranty Card, Product certificate and manual for the patient.
Compactness and availability We offer a simple and reliable solution for all possible clinical situations. The doctor uses only one
surgical kit to perform operations on all implant types. Bio3 implant system has 2 platforms for implants with conical connection.
Service and Training The company pays big attention to the service support to our clients in all countries of the world.
Bio3 Implants organizes specialized lectures, specialized educational courses and programs, as well as workshops and seminars for implantologists, prosthodontists and dental technicians in different countries.
Our mission is to help our clients every day by offering them reliability, aesthetics and patient’s beautiful smile.
Your customer’s smile is our mutual success! We speak the same language with you!
Bio3 Implants is the synergy of the best achievements of the German dentistry school and innovative global developments.
Bio3 IMPLANTS
Bio3 IMPLANTS COMPANYPremium Tapered Implants Range
6
Bio3 Implants Сompany
Researches show that ACTIVE surface stimulates bone tissue growth throughout entire implant surface, which provides high mechanical stability and osseointegration in much shorter terms.
These unique properties of the surface allow performing orthopedic rehabilitation at an earlier stage as well as significantly reduce the risk within implant installation under one-stage protocol.
Bio3 Implants surface is a modern generation of surfaces in dental implantology.
Bio3 tapered implant system provides an ideal tight connection between the implant and abutmentBio3 Conical Connection
Bio3 Implants | surface
The surface of Bio3 Implants - Active is formed by coarse sandblasting with corundum particles, due to which a macro-roughness of the titanium surface is achieved. And then - acid etching to obtain microroughness. As a result, microdepressions 2-4 microns in size are formed and the surface acquires an ideal topography for cell attachment. This surface is not microporous and therefore provides a site for tissue inclusion, which reduces bacterial colonization.
Bio3 Implants - Active has been designed to achieve a high percentage of bone-to-implant contact as well as high torque and performance similar to ACTIVE. The most important property of the Bio3 Implants - Active surface is its high stress resistance, proven through research.
Reactive surface of Bio3 Active implant increases the level of implant survival to the maximum of 99-100%.
Bio3 ACTIVE surface
1800 magnification 3000 magnification 5000 magnification
Bio3 IMPLANTS SURFACE
7Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
MANUAL SURGICAL GUIDEExtraction of the implant from a titanium sleeve
In order to prevent implant contact with other materials while removal, the implant is provided with a titanium sleeve. For maximum protection, the flask is packed in a sterile blister to avoid contact of the implant surface with any foreign particles.
Choose the necessary
adapter
Adapter-implant driver
Surgical handpiece
Range ratchet 11а
2
8
Bio3 IMPLANTPROGRESSIVE
9Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Conical connection with inner hex provides precision implant-abutment connection and therefore, influences well on the stability process of permanent dental prostheses. 12° taper provides this connection with perfect fitting and tightness.
Conical connection is absolutely bacterial dense and shows excellent results in compression reduction in implant cervical part.
Spiral-shaped implant with aggressive thread was developed for a better primary stability, therefore it is recommended to be used in II, III and IV bone tissue types.
Conical implant body perfectly complies with the drill shape for more precision bone fitting.
Implant body tapering ensures better self-tapping property. Noninvasive apical implant part prevents from anatomical damaging during sinus lifting
Platform switching
Bio3 Implants surface is the latest generation of dental implant surfaces. It is ACTIVE. The increased surface area provides perfect bone–implant connection. Due to this advantage the implant has higher primary stability and quick osseointegration. It can be used with one- or two-stage protocol.
Due to the precise design of implant apical part it can prevent from damage of anatomical bone structure and can give the opportunity to the implantologist to decrease the time of surgical implantation stage. Progressive Implant enables to solve any clinical problems even in highly complicated situations.
CONICAL CONNECTION
CHARACTERISTICS
SURFACE
APICAL PART
CO
NIC
AL
CO
NN
EC
TIO
NT
HR
EA
DG
EO
ME
TR
YB
io3
IMP
LA
NT
S S
UR
FAC
EA
PIC
AL
PA
RT
Tapered dental implants rangeBio3 IMPLANT PROGRESSIVE
10
Implants
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Bone
Tap
TSP
3.3
1 2 3 4 6
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
Profi
le d
rill P
3.3
5
ø 2.60
PROGRESSIVE IMPLANT
Progressive Implant is the newest development Being self-tapping it provides perfect fixation and primary stability.
Spiral-shaped implant form with various thread depth is developed for better bone compression while using in III-IV bone types.
Bio3 Implants | Progressive
PRODUCT CODE
Prog
ress
ive
3.3
7 Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
PTI3
.3/1
0.
PTI3
.3/8
.
PTI3
.3/1
3.
PTI3
.3/1
1.5.
10 mm8 mm 11.5 mm 13 mm
Bio3 IMPLANT PROGRESSIVEStandard platform
3.3
2.1
DIAMETER
INTERNAL HEX
is included in each implant set
TITANIUM COVER SCREW 2.1
BBioio
3 IM
PLAN
TS3
IMPL
ANTSPrem
ium
Den
tal I
mpl
ants
2.1
Leng
th
ATTENTION!It is used for installation in front and lateralparts (canines, incisors, premolars).
11Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
ø 3.2
2.1
Leng
th
PRODUCT CODE
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Profi
le d
rill P
3.8
Bone
Tap
TSP
3.8
Prog
ress
ive
3.8
1 2 3 4 5 6 7 8
PTI3
.8/1
0.
PTI3
.8/8
.
PTI3
.8/1
3.
PTI3
.8/1
1.5.
10 mm8 mm 11.5 mm 13 mm
RECOMMENDED DRILLING SPEED
Standard platform
Bio3 IMPLANT PROGRESSIVE
3.8
2.1
DIAMETER
INTERNAL HEX
is included in each implant set
TITANIUM COVER SCREW 2.1
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
ATTENTION!It is used for installation in front and lateralparts (canines, incisors, premolars).
12
Implants
Profi
le d
rill P
4.2
7
4.2
2.5
DIAMETER
INTERNAL HEX
ø 3.6
2.5
PRODUCT CODE 8 mm6 mm 10 mm 11.5 mm 13 mm
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Drill
3.9
Bone
Tap
TSP
4.2
Prog
ress
ive
4.2
1 2 3 4 5 6 8 9
PTIB
4.2/
8.
PTIB
4.2/
6.
PTIB
4.2/
11.5
.
PTIB
4.2/
13.
PTIB
4.2/
10.
Bio3 Implants | Progressive
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Bio3 IMPLANT PROGRESSIVEWide platform
Pre
miu
m D
enta
l Im
plan
ts
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 400-600D2 500-700D3 500-600D4 400-500
is included in each implant set
TITANIUM COVER SCREW 2.5
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
Leng
th
13Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
5.0
2.5
DIAMETER
INTERNAL HEX
2.5
4.2
Leng
th
PRODUCT CODE 8 mm6 mm 10 mm 11.5 mm 13 mm
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Drill
3.9
Drill
4.7
Prog
ress
ive
5.0
Bone
Tap
TSP
5.0
Profi
le d
rill P
5.0
1 2 3 4 5 6 7 8 9 10
PTIB
5/8.
PTIB
5/6.
PTIB
5/11
.5.
PTIB
5/13
.
PTIB
5/10
.
Wide platform
Bio3 IMPLANT PROGRESSIVE
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 400-600D2 500-700D3 500-600D4 400-500
D1 400-600D2 400-700D3 500-600D4 400-500
is included in each implant set
TITANIUM COVER SCREW 2.5
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
14
Bio3 Implants Сompany
Bio3 IMPLANTADVANCED
15Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
CO
NIC
AL
CO
NN
EC
TIO
NT
HR
EA
DG
EO
ME
TR
YB
io3
IMP
LA
NT
S S
UR
FAC
EA
PIC
AL
PA
RT
Tapered dental implants rangeBio3 IMPLANT ADVANCED
Сonical connection with inner hex provides precision implant–abutment connection and therefore, influences well on the stability process of permanent dental prostheses. 12° taper provides this connection with perfect fitting and tightness.
Conical connection is absolutely bacterial dense and shows excellent results in compression reduction in implant cervical part.
Spiral-shaped implant with classical triangle thread of two recurrent lengths, self-tapping. It was developed for better primary stability. It can be used in various bone types.
Conical implant body perfectly complies with the drill shape for more precision bone fitting.
Implant body tapering ensures better self-tapping property. Noninvasive apical implant part prevents from anatomical damaging during sinus lifting.
Platform switching
Bio3 Implants surface is the latest generation of dental implant surfaces. It is ACTIVE. The increased surface area provides perfect bone–implant connection. Due to this advantage the implant has higher primary stability and quick osseointegration. It can be used with one- or two-stage protocol.
An apical part has sharp threads and antirotational sulci. Due to the special form of the apical part it can prevent from anatomical bone structure damage.
CONICALCONNECTION
CHARACTERISTICS
SURFACE
APICAL PART
16
Implants
Profi
le d
rill P
3.3
5
ø 2.0
2.1
Leng
th
ADVANCED IMPLANT Advanced Implant has a unique design developed to provide perfect clinical results for various dental implantation procedures. Its root-shaped form and self-tapping triple thread enables to ease implantation process and provides high level of primary stability. The implant cervical part is done with micro thread for maximum contact of the implant with a cortical layer and prevents from bone resorption. Dr
ill 1
.5
Drill
2.0
Drill
2.8
Drill
3.0
Adva
nced
3.3
Bone
Tap
TS3
.3
1 2 3 4 76
PRODUCT CODE 10 mm 11.5 mm 13 mmATI
3.3/
10.
ATI3
.3/1
3.
ATI3
.3/1
1.5.
Bio3 Implants | Advanced
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Bio3 IMPLANT ADVANCEDStandard platform
3.3
2.1
DIAMETER
INTERNAL HEX
Pre
miu
m D
enta
l Im
plan
ts
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
is included in each implant set
TITANIUM COVER SCREW 2.1
17Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
ø 2.8
2.1
Leng
th
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Profi
le d
rill P
3.8
Bone
Tap
TS3
.8
Adva
nced
3.8
1 2 3 4 5 6 7 8
PRODUCT CODE 8 mm 10 mm 11.5 mm 13 mmATI3
.8/8
.
ATI3
.8/1
1.5.
ATI3
.8/1
3.
ATI3
.8/1
0.
Standard platform
Bio3 IMPLANT ADVANCED
3.8
2.1
DIAMETER
INTERNAL HEX
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
is included in each implant set
TITANIUM COVER SCREW 2.1
18
Implants
Profi
le d
rill P
4.2
7
ø 3.1
2.5
Leng
th
PRODUCT CODE ATIB
4.2/
8.
ATIB
4.2/
11.5
.
ATIB
4.2/
13.
ATIB
4.2/
10.
8 mm 10 mm 11.5 mm 13 mm
Drill
1.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Drill
3.9
Bone
Tap
TS4
.2
Adva
nced
4.2
1 1 2 3 4 5 6 8 9
Bio3 IMPLANT ADVANCEDWide platform
4.2
2.5
DIAMETER
INTERNAL HEX
Bio3 Implants | Advanced
BBioio
3 IM
PLAN
TS3
IMPL
ANTSPrem
ium
Den
tal I
mpl
ants
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 400-600D2 500-700D3 500-600D4 400-500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
is included in each implant set
TITANIUM COVER SCREW 2.5
19Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Wide platform
Bio3 IMPLANT ADVANCEDDr
ill 1
.5
Drill
2.0
Drill
2.8
Drill
3.0
Drill
3.5
Drill
3.9
Drill
4.7
Adva
nced
5.0
Bone
Tap
TS5
.0
Profi
le d
rill P
5.0
1 2 3 4 5 6 7
ø 3.6
2.5
Leng
th
8 9 10
5.0
2.5
DIAMETER
INTERNAL HEX
PRODUCT CODE ATIB
5/8.
ATIB
5/11
.5.
ATIB
5/13
.
ATIB
5/10
.
8 mm 10 mm 11.5 mm 13 mm
RECOMMENDED DRILLING SPEED
D1 800-1200D2 800-1200D3 800-1000D4 800-1000
D1 800-1000D2 800-1000D3 700-900D4 600-800
D1 600-800D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 500-700D2 600-800D3 500-600D4 400-500
D1 400-600D2 500-700D3 500-600D4 400-500
D1 400-600D2 400-700D3 500-600D4 400-500
Implantation Protocol.*
* The Protocol does not replace an appropriate training.** It is used in I and II bone types. Our drill 2.8 change color and go from red to black. During the transition period, we will deliver the red and black products to you, up to complete modification of the range.
is included in each implant set
TITANIUM COVER SCREW 2.5
20
21Bio3 Implants |
Bio3
IMP
LAN
TSPr
emiu
m D
enta
l Im
plan
ts
SUPRASTRUCTURES
22
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
4.2 mm
2 mm
8.45 mm
4.2 mm
3 mm
9.45 mm
4.2 mm 4.2 mm 4.2 mm
4 mm
10.45 mm
5 mm
11.45 mm
7 mm
13.45 mm
DIAMETER
LENGTH
Leng
th
Full
Leng
th
ø 4.2
HEALING CAPS
PRODUCT CODE
PRODUCT CODE
GFS2 GFS3 GFS4 GFS5 GFS7
STANDARD
HEALING CAPS
FULL LENGTH
5.5 mm5.5 mm
3 mm
8.73 mm
2 mm
7.72 mm
5.5 mm
4 mm
9.73 mm
5.5 mm
5 mm
10.73 mm
DIAMETER
LENGTH
FULL LENGTH
MATERIAL Titanium Grade 5
Healing cap for standard platform (2.1 mm) with two varios diameters – 4.2 mm and 5,5 mm.It is installed using universal or handprosthetic insertion driver.
WIDE
GFS/W3GFS/W2 GFS/W4 GFS/W5
ø 1.28
Leng
th
ø 5.5
Standard platform
2.1INTERNAL HEX
23Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
5.1 mm
8.45 mm
2 mm
5.1 mm
9.45 mm
3 mm
5.1 mm 5.1 mm 5.1 mm
10.45 mm
4 mm
11.45 mm
5 mm
13.45 mm
7 mm
DIAMETER
LENGTH
Full
Leng
th
Leng
th
HEALING CAPS
PRODUCT CODE
PRODUCT CODE
STANDARD
Wide platform
HEALING CAPS
2.5INTERNAL HEX
GFB2 GFB3 GFB4 GFB5 GFB7
ø 5.1
FULL LENGTH
5.5 mm 5.5 mm 5.5 mm 5.5 mm
2 mm
7.9 mm
3 mm
8.9 mm
4 mm
9.9 mm
5 mm
10.9 mm
DIAMETER
LENGTH
FULL LENGTH
MATERIAL Titanium Grade 5
Healing cap for wide platform (2.5 mm)with two varios diameters – 5.1 mm and 5.5 mm.It is installed using universal or handprosthetic insertion driver. ø 1.28
Leng
th
ø 5.5
WIDE
GFB/W2 GFB/W3 GFB/W4 GFB/W5
24
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
COVER SCREW HEALING CAPS
ø 3.20ø 3.20
ø 2.08
4,50
5,50
10,5
0
GFNS
GFNB
ø 4.0ø 4.0
ø 2.08
4,50
5,50
10,5
0
MATERIAL Titanium Grade 5
Ensures ideal gingival margin.
Suitable for any variants of following dental prosthetics.
3.2 mm
4.0 mm
10.5 mm
10.5 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
PRODUCTCODE
PRODUCTCODE
Standard platform
2.1INTERNAL HEX
Wide platform
2.5INTERNAL HEX
25Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
2.5
2.5
ø 5.1
ø 3.0
ø 2.3
Sho
uld
er
Leng
th
Shou
lder
2.1
ø 3.0ø 2.3
ø 2.1
Diameter
Standard platform
Wide platform
2.1INTERNAL HEX
STRAIGHT ANATOMIC ABUTMENTSLe
ngth
STANDARD
Anatomic titanium abutment for wide plat-form (2.5 mm) with 1. 2. 3 mm shoulders.It is installed using universal or hand pros-thetic insertion driver.Prosthetic screw in each set.
MATERIAL Titanium Grade 5Anatomic titanium abutment for standard platform (2.1 mm) with 1. 2. 3 mm shoulders that has two various shoulder diameter width – 4.2 mm and 5.5 mm. It is installed using universal or hand prosthetic insertion driver.
Each abutment set includes:
Each abutment set includes:
PROSTHETIC SCREW
PROSTHETICSCREW
GAAS1 GAAS1/W1 GAAS1/W2 GAAS1/W3GAAS2 GAAS3
GAAB1 GAAB2 GAAB3
DIAMETER 4.2 mm 4.2 mm 4.2 mmSHOULDER 1 mm 2 mm 3 mm
LENGTH 11.55 mm 12.55 mm 13.55 mm
DIAMETER 5.1 mm 5.1 mm 5.1 mmSHOULDER 1 mm 2 mm 3 mm
LENGTH 12.4 mm 13.4 mm 14.4 mm
5.5 mm 5.5 mm 5.5 mm1 mm 2 mm 3 mm11.55 mm 12.55 mm 13.55 mm
WIDE
MATERIAL Titanium Grade 5
2.5INTERNAL HEX
PRODUCTCODE
PRODUCTCODE
26
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
STRAIGHT ABUTMENTSStandard platform
2.1INTERNAL HEX
2.1
ø 3.35
Leng
th
Full
Leng
th
ø 3.35
ø 3.0ø 2.3
Each abutment set includes:
PROSTHETIC SCREW
WIDE
WIDE
STANDARD
STANDARD
GABS9
GABB9
GAS8
GAB8
GAS9
GAB9
GAS13
GAB13
3.35 mm
3.85 mm
5.0 mm
5.5 mm
6.7 mm
8.07 mm
9 mm
9 mm
10.55 mm
12.12 mm
13.7 mm
13.9 mm
3.35 mm
3.85 mm
8.7 mm
10.07 mm
12.55 mm
14.12 mm
3.35 mm
3.85 mm
11.7 mm
13.07 mm
15.55 mm
17.12 mm
DIAMETER
DIAMETER
LENGTH
LENGTH
FULL LENGTH
FULL LENGTH
Titanium straight abutment for standard platform (2.1 mm). Prosthetic screw in each set.It is installed using universal or hand prosthetic insertion driver.
MATERIAL Titanium Grade 5
Wide platform
2.5INTERNAL HEX
MATERIAL Titanium Grade 5
2.5
ø 3.85
Leng
th
Full
Leng
th
ø 3.85
ø 3.0ø 2.3
Each abutment set includes:
PROSTHETIC SCREW
Titanium straight abutment for wide platform (2.5 mm). Prosthetic screw in each set.It is installed using universal or hand prosthetic insertion driver.
PRODUCTCODE
PRODUCTCODE
27Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Leng
th
Each abutment set includes:
PROSTHETIC SCREWEAAS15
EAAB15
EAAS1501
EAAB1501
EAAS1502
EAAB1502
EAAS1503
EAAB1503
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
Each abutment set includes:
PROSTHETIC SCREW
ANGULATED ANATOMIC ABUTMENTS 15°
2.1
15°
Shou
lder
ø 4.2ø 2.1
PRODUCTCODE
PRODUCTCODE
2.5
15°
Shou
lder
ø 5.12.5
Angulated anatomic titanium abutment 15 ° for standard platform (2.1 mm) with 1. 2. 3 mm shoulder or without it. Prosthetic screw in each set. It is installed using universal or hand prosthetic insertion driver.
Angulated anatomic titanium abutment 15 ° for wide platform (2.5 mm) with 1. 2. 3 mm shoulder or without it. Prosthetic screw in each set. It is installed using universal or hand prosthetic insertion driver.
DIAMETER 3.35 mm 4.2 mm 4.2 mm 4.2 mmSHOULDER 1 mm 2 mm 3 mm
LENGTH 11.0 mm 10.85 mm 11.85 mm 12.85 mmANGLE 15 ° 15 ° 15 ° 15 °
DIAMETER 3.85 mm 5.1 mm 5.1 mm 5.1 mmSHOULDER 1 mm 2 mm 3 mm
LENGTH 12.85 mm 11.55 mm 12.2 mm 13.2 mmANGLE 15 ° 15 ° 15 ° 15 °
28
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
Wide platform
2.5INTERNAL HEX
MATERIAL Titanium Grade 5
Each abutment set includes:
PROSTHETIC SCREW
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
MATERIAL Titanium Grade 5
ANGULATED ANATOMIC ABUTMENTS 25°
2.1
25°25°
Sho
uld
er
4.2
2.5
2.1
EAAS25
EAAB25
EAAS2502
EAAB2502
Angulated anatomic titanium abutment 25 ° for standard platform (2.1 mm) with 2 mm shoulder or without it.
Prosthetic screw in each set. It is installed using universal or hand prosthetic insertion driver.
DIAMETER 3.35 mm 4.2 mmSHOULDER 2 mm
LENGTH 10.9 mm 11.75 mmANGLE 25 ° 25 °
DIAMETER 3.85 mm 5.1 mmSHOULDER 2 mm
LENGTH 12.8 mm 12.15 mmANGLE 25 ° 25 °
2.52.5
2.1
25°25°
Sho
uld
er
5.1
2.5
Angulated anatomic titanium abutment 25 ° for wide platform (2.5 mm) with 2 mm shoulder or without it.
Prosthetic screw in each set. It is installed using universal or hand prosthetic insertion driver.
PRODUCTCODE
PRODUCTCODE
3,85
3,35
Leng
th
Leng
th
Leng
th
Leng
th
29Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
sWide platform
2.5INTERNAL HEX
MATERIAL Titanium Grade 5
Each abutment set includes:
PROSTHETIC SCREW
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
MATERIAL Titanium Grade 5
DIAMETER 4.7 mm 4.7 mm 4.7 mmLENGTH 1 mm 2 mm 3 mm
DIAMETER 4.7 mm 4.7 mm 4.7 mmLENGTH 1 mm 2 mm 3 mm
VAAS1
VAAB1
VAAS2
VAAB2
VAAS3
VAAB3
Leng
th
Leng
th
ø 4.7
ø 2.1
The abutment is used to renew a single construction or a fixed bridge with screw retention.Screw in with a maximum force of 20 newton.
cover screw CS VAAS
SCREW RETAINED ABUTMENTS
cover screw CS VAAB
ø 4.7
ø 2.5
The abutment is used to restore a single construction or a fixed bridge with screw retention.Screw in with a maximum force of 20 newton.
Healing Cap Burned-out plastic sleeve Temporary PEEK sleevefor screw retained abutment for screw
retained abutmentfor screw retained abutmentfor screw retained abutmentfor screw retained
abutment
Titanium sleeve for screw retained abutment
Laboratory Analog Transfer
GAES2 Plastic VAAS Plastic VAASNON HEX
GAVAA
Screw SSA is included*
TGAS 1 IAES SAES15
* * * **
PRODUCTCODE
PRODUCTCODE
30
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
SCREW RETAINED ABUTMENTS
Leng
th
Leng
th
ø 4.3
The abutment is used to restore a single construction or a fixed bridge with screw retention.Screw in with a maximum force of 20 newton.
ø 4.3
Screw for GIMA is included*
GIMA GIMA-W Plastic TCMS TGMN 1GIMV CSMU IAEN
Healing Cap Healing Cap Wide Burned-out plastic sleeve Temporary PEEK sleevefor screw
retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
Out-BurntPlastic Cap
Titanium sleeve for screwretained abutment / angulated multi-unit
Castable sleeve for screwretained abutment / angulated multi-unit
Laboratory Analog Transfer
* *** * *
SOKM15
Wide platform
2.5INTERNAL HEX
MATERIAL Titanium Grade 5
Standard platform
2.1INTERNAL HEX
MATERIAL Titanium Grade 5
VAAS1+
VAAB1+
VAAS2+
VAAB2+
VAAS3+
VAAB3+
DIAMETER 4.3 mm 4.3 mm 4.3 mmLENGTH 1 mm 2 mm 3 mm
DIAMETER 4.3 mm 4.3 mm 4.3 mmLENGTH 1 mm 2 mm 3 mm
PRODUCTCODE
PRODUCTCODE
31Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Screw for GIMA is included*
GIMA GIMA-W Plastic TCMS TGMN 1GIMV CSMU IAEN
Healing Cap Healing Cap Wide Burned-out plastic sleeve Temporary PEEK sleevefor screw
retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
Out-BurntPlastic Cap
Titanium sleeve for screwretained abutment / angulated multi-unit
Castable sleeve for screwretained abutment / angulated multi-unit
Laboratory Analog Transfer
* *** * *
SOKM15
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
TBMS1701
TBMB1701
TBMS1702
TBMB1702
TBMS1703
TBMB1703
ANGULATED MULTI-UNITS 17°
ø 4.35
Leng
thLe
ngth
ø 2.1
17°
2.1
17°
ø 4.35
ø 2.5
2.1
PROSTHETIC SCREW
Each multi-unit basis set includes:
PROSTHETIC SCREW
Each multi-unit basis set includes:
DIAMETER 4.35 mm 4.35 mm 4.35 mmLENGTH 1 mm 2 mm 3 mm
DIAMETER 4.35 mm 4.35 mm 4.35 mmLENGTH 1 mm 2 mm 3 mm
Angulated multi-unit 17° of a standard/wide platform is intended for the construction with screw retention during the treatment of partial or full adentia. It is used in cases during which the implant is placed at an angle. The set includes a bone screw. A multifunctional torque wrench is used for the installation.
PRODUCTCODE
PRODUCTCODE
32
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
PROSTHETIC SCREW
Each multi-unit basis set includes:
PROSTHETIC SCREW
Each multi-unit basis set includes:
ANGULATED MULTI-UNITS 30°
TBMS3001
TBMB3001
TBMS3002
TBMB3002
TBMS3003
TBMB3003
DIAMETER 4.3 mm 4.3 mm 4.3 mmLENGTH 1 mm 2 mm 3 mm
DIAMETER 4.3 mm 4.3 mm 4.3 mmLENGTH 1 mm 2 mm 3 mm
30°
ø 4.3
Leng
th
ø 2.1
2.1
30°
ø 4.3
Leng
th
ø 2.5
2.1
Angulated multi-unit 30° of a standard/wide platform is intended for the construction with screw retention during the treatment of partial or full adentia. It is used in cases during which the implant is placed at an angle. The set includes a bone screw. A multifunctional torque wrench is used for the installation.
PRODUCTCODE
PRODUCTCODE
Screw for GIMA is included*
GIMA GIMA-W Plastic TCMS TGMN 1GIMV CSMU IAEN
Healing Cap Healing Cap Wide Burned-out plastic sleeve Temporary PEEK sleevefor screw
retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screw retained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
for screwretained abutment / angulated multi-unit
Out-BurntPlastic Cap
Titanium sleeve for screwretained abutment / angulated multi-unit
Castable sleeve for screwretained abutment / angulated multi-unit
Laboratory Analog Transfer
* *** * *
SOKM15
33Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
34
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
SCREW RETAINED ABUTMENTS MANUALUsing titanium sleeve
Model
Model
Model
Intra-oral fixation
GAVAAAnalogs
Analogs
Gypsum
Analogs
Retaining screw
Implants
Titanium sleeve
Gypsum
Gypsum Bone
Denture Denture
1
3
2
4
35Bio3 Implants |
SCREW RETAINED ABUTMENTS MANUAL
Using temporary PEEK sleeve for screw retained abutment
Using burned-out plastic sleeve for individual construction production
Burned-outplastic sleeve
Temporary PEEKsleeve
Bio3 Implants | Screw Retained Abutments
Temporarycrown
PEEK Sleeve
Screw retained abutment
Retaining screw
Retaining screw
Burned-outplastic sleeve
TransferImpressionmaterial
Open trayimpression
Gypsum model
Crown
Implants
Bone
Analogs
Implant
Prosthetic screw
Bone
1 2 3
1
7 8 9 10
2 3 4 5 6
36
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
BAS2
BAB2
BAS3
BAB3
BAS4
BAB4
BAS5
BAB5
BAS6
BAB6
BALL ATTACHMENTS
DIAMETER 4.2 mm 4.2 mm 4.2 mm 4.2 mm 4.2 mmLENGTH 2 mm 3 mm 4 mm 5 mm 6 mm
ø 1.28
ø 4.2ø 2.5
Leng
th
Ball attachment for overdentures and removable dentures fixation for standard platform (2.1 mm) as an element for dental prosthetics on two or more implants.It is installed using universal or hand prosthetic insertion driver.
Ball attachment for overdentures and removable dentures fixation for wide platform (2.5 mm) as an element for dental prosthetics on two or more implants.It is installed using universal or hand prosthetic insertion driver.
ø 1.28
Leng
th
ø 5.0ø 2.5
MKBA
WKBA
SKBA
FKBA
PRB
Metal Cap forBall Attachment
Soft Cap forBall Attachment
Standard Cap forBall Attachment
Hard Cap forBall Attachment
Plastic Ring for Ball Attachment
DIAMETER 5.0 mm 5.0 mm 5.0 mm 5.0 mm 5.0 mmLENGTH 2 mm 3 mm 4 mm 5 mm 6 mm
PRODUCTCODE
PRODUCTCODE
37Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
ø 1.28
ø 2.5ø 3.85
Leng
th
MKL
WKL
SKL
FKL
Metal Capfor locators
Soft Capfor locators
Standard Capfor locators
Hard Cap forfor locators
ø 1.28
ø 2.1ø 3.85
Leng
th
LOCATORS
Locators for overdentures and removable dentures fixation for standard platform (2.1 mm) as an element for dental prosthetics on two or more implants.It is installed using universal or hand prosthetic insertion driver.
Locators for overdentures and removable dentures fixation for wide platform (2.5 mm)as an element for dental prosthetics on two or more implants.It is installed using universal or hand prosthetic insertion driver.
Wide platform
2.5INTERNAL HEX
MATERIAL Titanium Grade 5
Standard platform
2.1INTERNAL HEX
MATERIAL Titanium Grade 5
LS2
LB2
LS3
LB3
LS4
LB4
LS5
LB5
LS6
LB6
DIAMETER 3.85 mm 3.85 mm 3.85 mm 3.85 mm 3.85 mmLENGTH 2 mm 3 mm 4 mm 5 mm 6 mm
DIAMETER 3.85 mm 3.85 mm 3.85 mm 3.85 mm 3.85 mmLENGTH 2 mm 3 mm 4 mm 5 mm 6 mm
PRODUCTCODE
PRODUCTCODE
38
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
DIAMETER 4.5 mmLENGTH 7.7 mm
DIAMETER 4.5 mmLENGTH 7.7 mm
TITANIUM BASIS WITH A BURNED-OUT PLASTIC SLEEVE
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
2.1
ø 4.5
ø 2.1
7.7
2.5
ø 4.5
ø 2.5
7.7
TBKS1
TBKB1
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
Burned out plastic
Burned out plastic
PRODUCTCODE
PRODUCTCODE
39Bio3 Implants |
Wide platformManual
TITANIUM BASIS WITH A BURNED-OUT PLASTIC SLEEVE
Step 1:
Step 5:
Step 9:
Step 2:
Step 6:
Step 3:
Step 7:
Step 10:
Step 4:
Step 8:
Step 11:
This suprastructure is intended for manufacturing of individual bonding crowns to the standard base.This suprastructure usage simplifies the technician’s work while crowns modeling as the burned-out plastic sleeve is burnt out and is not subject to shrinkage or deformation, and it simply burns out at high temperatures saving the precision between titanium base and future crown.The impression obtained by standard direct method along with the suprastructure is passed to the technical laboratory.
A lab technician makes a gypsum model and fastens titanium platform in it together with a plastic cap.
In the casting laboratory a sprue is being attached to the wax. The sprue in its turn is attached to the main sprue thereby forming the sprue tree.
The model along with the cap is transmitted to the casting lab for the future crown basis casting.
Lab technician molds wax model of the future tooth crown on the cap.
A metal ring is being put on the sprue tree. This metal ring will serve as a form for filling the investment material.
Molded wax model along with the cap is being removed by lab technician from the titanium basis.
Titanium basis with burned-out plastic sleeve simplifies the technician’s work while crowns modeling as it is burnt out and is not subject to shrinkage or deformation
The form with the sprue tree is filled in with investment material (special high-temperature pulp for casting).
After solidification of the investment material the form is placed into a muffle furnace, where at a temperature of 900-1100 C° the wax and ash-free sleeve burn out, forming a blow hole for future casting.
Into the blow hole, formed by burning out of wax and plastic, the desired free-flowing metal or free-flowing ceramics (in a fluid state) is being filled in. Using the method of vacuum or centrifugal casting, blow holes are filled in with dental alloy (CoCr or NiCr).
The crown is released from sprues and is being sandblasted; ceramic firing on it and it is being baked.
Prefabricated crown is bonded to the titanium platform with chemical cure composite.
40
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
PROSTHETICS FOR CAD/CAM
PMAS STPS-Ti
PMAW STPB-Ti
10 mm
10 mm
20.0 mm
19.5 mm
DIAMETER
DIAMETER
FUNCTIONAL LENGTH
FUNCTIONAL LENGTH
ø 10ø 8
ø 8
4.25
5.5
ø 8
ø 3.5
ø 4.0
10.5
10.5
ø 10
20.0
14.0
14.1
5
19.5
3.50
3.50
MATERIAL MATERIAL
MATERIAL MATERIAL
Titanium Grade 5 Titanium Grade 5
Titanium Grade 5 Titanium Grade 5MATERIALPEEK
MATERIALPEEK
MATERIALPEEK
Scan-abutment for CAD/CAM TPS
PREMILL ABUTMENT
PREMILL ABUTMENT
Scan-abutment Narrow
Scan-abutment Narrow
Scan-abutment for CAD/CAM TPS
STPS
STPB
PROSTHETIC SCREW
Each platform set includes:
Each platform set includes:
PROSTHETICSCREW
Each platformset includes:
PROSTHETICSCREW
Each platformset includes:
PROSTHETIC SCREW
Each platform set includes:
PROSTHETIC SCREW
Each platform set includes:
PROSTHETIC SCREW
2.65
5 5.80
13
4.3
Titanium platformfor CAD/CAM MU
Scan Abutment for MU
TPMU
STP MU
Screw for GIMAis included
Screw for GIMAis included
*
*
Wide platform
Standard platform
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
ø 8
41Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
DIAMETER
DIAMETER
DIAMETER
FUNCTIONAL LENGTH
FUNCTIONAL LENGTH
FUNCTIONAL LENGTH
SHOULDER
SHOULDER 1
SHOULDER
SHOULDER
MATERIAL MATERIAL
MATERIALMATERIAL
Titanium Grade 5 Titanium Grade 5
Titanium Grade 5Titanium Grade 5
Titanium Base for Cerec
Titanium Base for Cerec
Titanium platform CAD/CAM
Titanium platform CAD/CAM
PROSTHETICS FOR CAD/CAM
ø 2.1
ø 2.5
ø 4.6
ø 5.0
ø 2.1
ø 2.5
ø 5.0
8.9 S
houl
der
Shou
lder
Shou
lder
1Sh
ould
er 1
9.3
ø 5.1
ø 2.3
ø 2.3
ø 3.3
func
tiona
l len
gth
func
tiona
l len
gth
ø 3.3
ø 2.35
ø 2.77
PROSTHETIC SCREW
Each platform set includes:
Each platform set includes:
PROSTHETIC SCREW
4.6 mm4.6 mm4.6 mm
5.0 mm
5.0 mm
4.6 mm 4.6 mm
4.1 mm4.1 mm4.1 mm
4.65 mm
4.65 mm
1 mm
2.3 mm
2.3 mm
0.5 mm
1.3 mm
1.3 mm
0.5 mm
1.3 mm
1.3 mm
1 mm
1 mm
4.1 mm
2 mm
3.3 mm
3.3 mm
4.1 mm
3 mm
4.3 mm
4.3 mm
TBS
TBW
DIAMETER
SHOULDER
SHOULDER 1
FUNCTIONAL LENGTH
5.1 mm5.1 мм5.1 мм 5.1 mm 5.1 mm
4.1 mm4.1 mm4.05 mm
1 mm0.5 mm0.5 mm
4.1 mm
2 mm
4.1 mm
3 mm
Wide platform
Standard platform
for standard platform (2.1 mm)
for wide platform (2.5 mm)
Non Hex
TPS1TPSTPS-NH TPS2 TPS3PRODUCTCODE
Non Hex
TPB-NH TPB1TPB TPB2 TPB3PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
Home page bio3-implants.com
contains the following libraries avaliable for download
Exocad libraries, 3SHAPE libraries
DIGITAL PROTOCOL FOR CREATING AN ORTHOPEDIC STRUCTURE
crown withabutment
zirconiumabutment
zirconiumabutment
titaniumplatform
scan abutment
implant laboratory analog for gluing into a print model
laboratory analog
scan body
premill abutment
titanium basefor Cerec
all-milledtitanium abutment
crown
43Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
BURNED-OUT ABUTMENTS
PCS NH
PCB PCB NH
Plastic Cylinder
Abutment
Non Hex
Burned-out abutmentfor standard platform (2.5 mm) is intended for individual orthopedic constructions.
Plastic Cylinder
Abutment
Non Hex
4.2 mm
4.6 mm 4.6 mm
14 mm
15.5 mm 14.5 mm
DIAMETER
DIAMETER DIAMETER
LENGTH
LENGTH LENGTH
Each abutment set includes:
Each abutment set includes: Each abutment set includes:
PROSTHETIC SCREW
PROSTHETIC SCREW PROSTHETIC SCREW
9.65
9.55
9.55
14
14.5
15.5
ø 4.2
ø 4.6
ø 4.6
MATERIAL
MATERIAL
Burned out plastic
Burned out plastic
Wide platform
Standard platform
PRODUCTCODE
44
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
tsSuprastructures
TRANSFER FOR Bio LINE PLASTIC TRANSFER-CAP
ø 4.0
ø 4.0ø 4.0
3.75 mm
4.0 mm
4.0 mm
4.0 mm
7.0 mm 8.0 mm
12.3 mm
9 mm
13.5 mm
9 mm
10 mm 10 mm
DIAMETER
DIAMETER
DIAMETER
DIAMETER
DIAMETER
LENGTH
LENGTH
LENGTH
LENGTH
LENGTH
2.5
2.5
2.5
2.62.6 3.23.2
7.0
5.55.5
Laboratory Implant Analog for standard platform (2.1 mm) as well as for
wide platform (2.5 mm). It is used in laboratory modeling. MATERIALMATERIAL Titanium Grade 5Titanium Grade 5
2.1
2.1
ø 3.75
2.1
12.3
13.5
6.3
LABORATORY ANALOGS
DIGITAL ANALOGS
STANDARD PLATFORM
STANDARD PLATFORM
STANDARD PLATFORM
WIDE PLATFORM
WIDE PLATFORM
WIDE PLATFORM
IAS
D-IAS
TFBL
IAB
D-IAB
PTCS PTCB
ø 5.
5
9.25
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
PRODUCTCODE
5.5 mm
9.25 mm
DIAMETER
LENGTH
45Bio3 Implants |
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
MATERIAL
MATERIAL
Titanium Grade 5
Titanium Grade 5
4.2 mm
4.2 mm
5.1 mm
5.1 mm
17.85 mm
13.75 mm
18.45 mm
14.35 mm
LENGTH
LENGTH
Diameter Diameter
Leng
th
Diam
eter
DIAMETER
DIAMETER
IMPRESSION TRANSFERS FOR CLOSED TRAY
STANDARD PLATFORM
STANDARD PLATFORM
WIDE PLATFORM
WIDE PLATFORM
Wide platformImpression Suprastructures
IMPRESSION TRANSFERS FOR OPEN TRAY
SOLS15
SOLS15
SGLS9
SOLB15
SOLB15
SGLB9
Each transfers set includes:
Each transfers set includes:
SCREW SFT17
SCREW SFT22
Leng
th
Leng
th
SOLS15 SOLB15
PRODUCTCODE
PRODUCTCODE
46
INSTRUCTIONS FOR Bio LINEAn exclusive product: prosthetics Bio Line repeats the natural shape of teeth at the level of gums, which allows to form an anatomically correct gingival line.Unlike conventional suprastructures, which are circular in cross section, Bio Line product range is characterized by a natural anatomical shape, which is different for various types of teeth - incisors, canines, premolars and molars.For convenience and correctness of the positioning of the structure (implant and suprastructures), an arrow is marked on the surface of an adapter for an implant driver. Control of the direction of this arrow guarantees the desired position of the internal hex of the implant for the correct installation of the suprastructures.
Correct installation of a Bio3 implant1. Insert an implant using an implant driver into the bone bed and manually or using a machine implant driver tighten it clockwise until it stops;2. Remove implant driver by pulling it straight up with little effort;3. Finish implant installation with a help of a torque wrench with a force of 30 N/cm;4. Make sure that an arrow on the surface of an adapter of implant driver is directed outward perpendicular to the alveolar ridge;5. Make sure there are no bone fragments and soft tissue on the implant platform and on its inner surface;6. Install the implant plug with a universal wrench;7. Sew soft tissue.
Anatomical formation of soft tissues using Bio Line products8. Perform a gum incision along the top of the alveolar ridge above the implant or use a tissue punch (mucotome) to open the implant plug;9. In case of invasion of excess bone above the implant surface, remove it, freeing the horizontal surface of the implant;10. Remove the plug;11. Choose a healing cap from Bio Line product range according to the thickness of mucosa.12. Depending on the type of a tooth, Bio Line range includes healing caps of 4 forms for: • incisors • canines • premolars • molars;13. Install and fix the required Bio Line healing cap into the internal hex of the implant using a universal wrench;Attention! For convenience and correct installation of the Bio Line healing cap, the arrow is marked on the surface of an adapter. When installing, make sure that this arrow is directed outward perpendicular to the alveolar ridge. This way, you can guarantee the correct position of the healing cap and further a Bio Line abutment in the internal hex of the implant, which will allow you to achieve maximum aesthetics.
Incorrectpositioning
Correctpositioning
14. Fix the healing cap with an orthopedic screw (included into the kit);15. Perform necessary manipulations with soft tissue;
Installation of transfer and impression taking16. Remove the healing cap with a universal or manual orthopedic wrench;17. Set the open tray transfer to the implant for taking an impression;18. Fill impression tray with impression material;19. Place the impression tray into the patient's oral cavity and wait until the mass hardens;20. Remove the impression with transfers;21. Transfer the impression to the laboratory for making a crown;22. Reinstall the healing cap till the crown is manufactured;
Installation of Bio Line anatomic abutment 23. Remove the healing abutment using the universal orthopedic wrench;24. Depending on the type of a tooth, select the appropriate Bio Line abutment, identical to the shape of a natural tooth for: • incisors • canines • premolars • molars;Attention! For convenience and correct installation of the Bio Line anatomical abutment, an arrow is marked on the surface of the adapter. When installing, make sure that this arrow is perpendicular to the alveolar ridge. This way, you can ensure the correct position of the Bio Line abutment in the internal hex of the implant.
25. Install a ready-made orthopedic construction into the implant bed;26. Fix the entire structure using an orthopedic screw that is included in the kit;27. Close the remaining hole with composite material.Let’s highlight the main benefits of using Bio Line unique prosthetics:• Anatomically correct restoration of the gingival line, as well as the chewing function,• Absence of additional surgery for gingival plastics,• Restoration of the beautiful aesthetics, appearance, and feeling of the patient as if having a natural tooth.
Abutment is installed incorrectly. Lateral side is turned
Bio LINEBio3
IMP
LAN
TSPr
emiu
m D
enta
l Im
plan
ts
Suprastructures
HEALING CAPS, INCISOR TYPE
6.0
5.0
Leng
th1
Leng
th
ø 2.1
6.0
5.0
Leng
th1
Leng
th
2.5
TOP
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
FRO
NTA
L V
IEW
GFIS 4.0GFIS 2.25
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural incisor form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural incisor form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver.For wide platform (2.5 mm). Prosthetic screw in each set.
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 4.1 mm 5.95 mm
LENGTH 1 2.25 mm 4.0 mm
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 4.5 mm 6.35 mm
LENGTH 1 2.25 mm 4.0 mm
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
GFIB 4.0GFIB 2.25
PRODUCT CODE
PRODUCT CODE
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
48
Bio LI
NE
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
GFCS 4.0GFCS 2.25
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mmLENGTH 4.1 mm 5.95 mm
LENGTH 1 2.25 mm 4.0 mm
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mmLENGTH 4.5 mm 6.35 mm
LENGTH 1 2.25 mm 4.0 mm
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
GFCB 4.0GFCB 2.25
6.5
5.0
Leng
th
2.1
Leng
th1
6.5
5.0
Leng
th1
Leng
th
2.5
HEALING CAPS, CANINE TYPE
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
Anatomic design. Formation of constant anatomic gingival volume. Identical to natural canine form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
Anatomic design. Formation of constant anatomic gingival volume. Identical to natural canine form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For wide platform (2.5 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
49Bio3 Implants | Bio LINE
Bio LINE
Suprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 4.5 mm 6.35 mm
LENGTH 1 2.25 mm 4.0 mm
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 4.1 mm 5.95 mm
LENGTH 1 2.25 mm 4.0 mm
6.0
4.5
Leng
th
2.1
Leng
th1
6.0
4.5
Leng
th
2.5
Leng
th1
GFPS 4.0
GFPB 4.0
GFPS 2.25
GFPB 2.25
TOP
VIE
WFR
ON
TAL
VIE
W
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural premolar form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural premolar form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For wide platform (2.5 mm). Prosthetic screw in each set.
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
HEALING CAPS, PREMOLAR TYPE
PRODUCT CODE
PRODUCT CODE
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
50
Bio LI
NE
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 6.0 mm 6.0 mmWIDTH 2 7.0 mm 7.0 mmLENGTH 4.1 mm 5.95 mm
LENGTH 1 2.25 mm 4.0 mm
WIDTH 1 6.0 mm 6.0 mmWIDTH 2 7.0 mm 7.0 mmLENGTH 4.5 mm 6.35 mm
LENGTH 1 2.25 mm 4.0 mm
GFMS 4.0
GFMB 4.0
GFMS 2.25
GFMB 2.25
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
7.0
6.0
Leng
th1
Leng
th
2.1
7.0
6.0
Leng
th1
Leng
th
2.5
HEALING CAPS, MOLAR TYPE
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural molar form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
Anatomic design. Formation of constant anatomic gingival volume.Identical to natural molar form. No need for soft tissue transplantation after the implantation or tooth removal. It is installed using universal or hand prosthetic insertion driver. For wide platform (2.5 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
51Bio3 Implants | Bio LINE
Bio LINE
Suprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
WIDTH 1 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 10.40 mm 11.85 mm
LENGTH 1 3.10 mm 5.0 mm
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 10.0 mm 11.85 mm
LENGTH 1 2.7 mm 4.5 mm
STRAIGHT ABUTMENTS, INCISOR TYPE
6.0
5.0L
eng
th
Leng
th1
2.1
6.0
5.0
Leng
th
Leng
th1
2.5
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
Biological construction identical to natural incisor form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For standard platform (2.1 mm). Prosthetic screw in each set.
Biological construction identical to natural incisor form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For wide platform (2.5 mm). Prosthetic screw in each set.
GAIS 8.5
GAIB 8.5
GAIS 10.0
GAIB 10.0
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
PRODUCT CODE
PRODUCT CODE
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
52
Bio LI
NE
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mmLENGTH 10.80 mm 12.65 mm
LENGTH 1 3.10 mm 5.0 mm
WIDTH 1 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mmLENGTH 10.4 mm 12.25 mm
LENGTH 1 2.7 mm 4.5 mm
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
STRAIGHT ABUTMENTS, CANINE TYPE
6.5
5.0Le
ngth
2.1
Leng
th1
6.5
5.0
Leng
th
2.5
Leng
th1
GACS 10.5
GACB 10.5
GACS 9.0
GACB 9.0
Biological construction identical to natural canine form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For standard platform (2.1 mm). Prosthetic screw in each set.
Biological construction identical to natural canine form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For wide platform (2.5 mm). Prosthetic screw in each set.
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
PRODUCT CODE
PRODUCT CODE
53Bio3 Implants | Bio LINE
Bio LINE
Suprastructures
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
WIDTH 1 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 10.8 mm 12.65 mm
LENGTH 1 3.10 mm 5.0 mm
WIDTH 1 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mmLENGTH 10.4 mm 12.25 mm
LENGTH 1 2.7 mm 4.5 mm
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
STRAIGHT ABUTMENTS, PREMOLAR TYPE
6.0
4.5
Leng
th
2.1
Leng
th1
6.0
4.5Le
ngth
2.5
Leng
th1
GAPS 10.5
GAPB 10.5
GAPS 9.0
GAPB 9.0
Biological construction identical to natural premolar form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For standard platform (2.1 mm). Prosthetic screw in each set.
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
Biological construction identical to natural premolar form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For wide platform (2.5 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
54
Bio LI
NE
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
WIDTH 1 6.0 mm 6.0 mmWIDTH 2 7.0 mm 7.0 mmLENGTH 9.40 mm 11.25 mm
LENGTH 1 3.10 mm 5.0 mm
WIDTH 1 6.0 mm 6.0 mmWIDTH 2 7.0 mm 7.0 mmLENGTH 9.0 mm 10.85 mm
LENGTH 1 2.7 mm 4.5 mm
Wide platform
Standard platform
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
STRAIGHT ABUTMENTS, MOLAR TYPE
7.0
6.0
Leng
th
2.1
Leng
th1
7.0
6.0
Leng
th
2.5
Leng
th1
GAMS 8.5
GAMB 8.5
GAMS 7.5
GAMB 7.5
2.5INTERNAL HEX
2.1INTERNAL HEX
Biological construction identical to natural molar form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For standard platform (2.1 mm). Prosthetic screw in each set.
Biological construction identical to natural molar form. Wide range of shapes, heights and shoulders. Scalloped edges comply with the contour of gingival margin. It is installed using universal or hand prosthetic insertion driver.For wide platform (2.5 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
55Bio3 Implants | Bio LINE
Bio LINE
Suprastructures
ANGULATED ABUTMENTS INCISOR TYPE 15° / 25°
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
WIDTH 1 5.0 mm 5.0 mm 5.0 mm 5.0 mmWIDTH 2 6.0 mm 6.0 mm 6.0 mm 6.0 mmLENGTH 10.4 mm 12.25 mm 10.4 mm 12.25 mm
LENGTH 1 2.7 mm 4.5 mm 2.7 mm 4.5 mm
WIDTH 1 5.0 mm 5.0 mm 5.0 mm 5.0 mmWIDTH 2 6.0 mm 6.0 mm 6.0 mm 6.0 mmLENGTH 10.80 mm 12.65 mm 10.80 mm 12.65 mm
LENGTH 1 3.1 mm 5.0 mm 3.1 mm 5.0 mm
5.0
6.0Le
ngth
2.1
15°
Leng
th1
5.0
6.0
Leng
th
2.5
25°
Leng
th1
EAIS 15/9.0
EAIB 15/9.0
EAIS 25/9.0
EAIB 25/9.0
EAIS 15/10.0
EAIB 15/10.0
EAIS 25/10.0
EAIB 25/10.0
Each abutment set includes:
PROSTHETIC SCREW
Angle 15°
Angle 15°
Angle 25°
Angle 25°
Angulated anatomic abutment, incisor type is recommended in case when the implants are installed at 15 ° or 25 ° angle.It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
Angulated anatomic abutment, incisor type is recommended in case when the implants are installed at 15 ° or 25 ° angle.It is installed using universal or hand prosthetic insertion driver. For wide platform (2.5 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
BBioio
3 IM
PLAN
TS3
IMPL
ANTS
Pre
miu
m D
enta
l Im
plan
ts
56
Bio LI
NE
Bio
3 Im
pla
nts
Сo
mp
any
Imp
ants
Kit
sIn
stru
men
tsS
pec
ial p
rop
osa
l S
up
rast
ruct
ure
s
ANGULATED ABUTMENTS CANINE TYPE 15° / 25°
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
TOP
VIE
WFR
ON
TAL
VIE
WTO
P V
IEW
FRO
NTA
L V
IEW
MATERIAL Titanium Grade 5
MATERIAL Titanium Grade 5
WIDTH 1 5.0 mm 5.0 mm 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mm 6.5 mm 6.5 mmLENGTH 11.0 mm 12.85 mm 11.0 mm 12.85 mm
LENGTH 1 2.7 mm 4.5 mm 2.7 mm 4.5 mm
WIDTH 1 5.0 mm 5.0 mm 5.0 mm 5.0 mmWIDTH 2 6.5 mm 6.5 mm 6.5 mm 6.5 mmLENGTH 11.4 mm 13.25 mm 11.4 mm 13.25 mm
LENGTH 1 3.10 mm 5.0 mm 3.10 mm 5.0 mm
EACS 15/9.0
EACB 15/9.0
EACS 25/9.0
EACB 25/9.0
EACS 15/10.0
EACB 15/10.0
EACS 25/10.0
EACB 25/10.0
Angle 15°
Angle 15°
Angle 25°
Angle 25°
6.5
5.0Le
ngth
2.1
15°
Leng
th1
6.5
5.0Le
ngth
2.5
25°
Leng
th1
Angulated anatomic abutment, canine type is recommended in case when the implants are installed at 15 ° or 25 ° angle.It is installed using universal or hand prosthetic insertion driver. For wide platform (2.5 mm). Prosthetic screw in each set.
Angulated anatomic abutment, canine type is recommended in case when the implants are installed at 15 ° or 25 ° angle.It is installed using universal or hand prosthetic insertion driver. For standard platform (2.1 mm). Prosthetic screw in each set.
PRODUCT CODE
PRODUCT CODE
57Bio3 Implants | Bio LINE
Bio LINE
Suprastructures
ANGULATED ABUTMENTS PREMOLAR TYPE TYPE 15° / 25°
Wide platform
2.5INTERNAL HEX
Standard platform
2.1INTERNAL HEX
Each abutment set includes:
PROSTHETIC SCREW
Each abutment set includes:
PROSTHETIC SCREW
WIDTH 1 4.5 mm 4.5 mm 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mm 6.0 mm 6.0 mmLENGTH 10.0 mm 11.85 mm 10.0 mm 11.85 mm
LENGTH 1 2.7 mm 4.5 mm 2.7 mm 4.5 mm
WIDTH 1 4.5 mm 4.5 mm 4.5 mm 4.5 mmWIDTH 2 6.0 mm 6.0 mm 6.0 mm 6.0 mmLENGTH 10.4 mm 12.25 mm 10.4 mm 12.25 mm
LENGTH 1 3.10 mm 5.0 mm 3.10 mm 5.0 mm
TOP
VIE
WFR
ON
TAL
VIE
WTO