Post on 23-Jul-2018
ProcessesStick (SMAW)MIG (GMAW)Flux-cored (FCAW) RMD®*Pulsed MIG (GMAW-P)*DC TIG (GTAW) Submerged arc (SAW) Stud welding — 1/2 inch (13 mm) Air carbon arc (CAC-A) 1/2-inch (13 mm) carbons
Heavy IndustrialApplicationsPipe welding Maintenance and repair rigsMechanical contractorConstructionMining maintenanceRailroad maintenance
Issued April 2018 • Index No. ED/14.0
The most powerful lineup of diesel welder/generators in the industry.All offer robust output for welding and power generation, and are ideal for dual-operator applicationson labor intensive jobsites, or jobsites with limited space.
More power. 800 amps of weld power and 27,000 watts of peak generator power.
Multi-arc welding. One dependable engine — two independent arcs with up to 400 amps each. Or plug in additionalinverters for a true multioperator workplatform! Example: Two additional XMT multiprocess machines equals four operators, up to 200 amps each.Premium-quality arcs allow operators to work independently with no arcinteraction. Multioperator welding hasnever been easier or more versatile.
Heavy-duty low-speed T4F andT4i industrial diesel engines.The cleanest, greenest diesel
power available. Utilizes diesel oxidationcatalyst (DOC) technology in T4F models to keep the air clean with NO exhaustaftertreatment maintenance.
Increased efficiency. More arcs and better fuel economy equal increased profitsfor your business. Estimated savings are34 percent with a dual-operator unit versustwo single-operator units. Big Blue® 800 Duo Pro
Multioperator work platform delivers twopremium arcs (up to 400 amps each) allowingwelding operators to work independently withno arc interaction.
Big Blue® 800 Duo Air Pak™
All-in-one welder/generator eliminates the needfor an auxiliary air compressor. The industrialIngersoll Rand screw-type air compressor isideal for gouging and running pneumatic tools.
Welder/generator is warranted by Miller for three years, parts and labor.Engine is warranted separately by engine manufacturer.
Output RangeSingle weld mode CC: 40–800 A, CV: 14–50 VDual weld mode CC: 20–400 A, CV: 14–50 V
Generator Output Rated at 104°F (40°C)3-phase 27,000 watts peak, 20,000 watts continuous1-phase 15,000 watts peak, 12,000 watts continuous
*With optional ArcReach Smart Feeder.
Big Blue® 800Series Diesel Engine-Driven Welder/AC Generator
QuickSpecs
USA models shown are
Remote control of the power sourcewithout a cord. See page 3.
Miller Electric Mfg. LLCAn ITW Welding Company1635 West Spencer StreetP.O. Box 1079Appleton, WI 54912-1079 USA
MillerWelds.comEquipment Sales US and CanadaPhone: 866-931-9730FAX: 800-637-2315International Phone: 920-735-4554International FAX: 920-735-4125
2
Big Blue® 800 Series Features
Big Blue 800 Duo Pro model shown
20,000 watts of pure generator power.Plug in an extra Miller® inverter-basedpower source for a second welding arc!
HD powder coat with zinc-rich primerprotects sheet metal from rust and corrosion.
Simple paralleling switch makes switchingfrom a single operator to dual operators a breeze. Weld up to 400 amps per sidewhen set up in dual-operator mode, or up to 800 amps in single-operator mode.
Electronic engine display simultaneouslydisplays fuel level, engine hours, coolanttemperature, oil pressure, battery volts,engine rpm, and air pressure. It also tracksoil change intervals, compressor hours, anddisplays engine diagnostics for quick andeasy servicing.
Arc control is beneficial when weldingwith stick and solid wires for easier fine-tuning of tough-to-weld materialsand out-of-position applications.
Digital meters with SunVision™
technology enable welding parameters to be viewed with greater clarity than analog meters — at virtually any angle. Meters can be seen clearly even in direct sunlight.
Standard 14-pin receptacle with Auto-Remote Sense™ for simple connection of remote controls and wire feeders.
Industrial USB port. Quicklyupload the latest software anddownload machine log files toretrieve in-depth informationsuch as diagnostics andmachine statistics.
Welder Truck Specific Models
The Big Blue 800 Duo Air Pak (USA model only)is available in welder truck specific models, which have the critical controls and side Acontrols located within easy reach of a ground-based operator when the machine is mounted on the bed of a large-body truck. This versionalso includes standard hardware upgradesincluding ArcReach® remote control technology,air cleaner restriction indicators, FA-1D lockableflame arrestor fuel cap 043947 and spark arrestor195012. The rear-mounted desiccant air dryersystem 195117001 is available as a fieldinstallation option.
The lower control panel has the following controls:air compressor on/offswitch and engine controlswitch.
Pair any Miller® ArcReachaccessory for completeremote control of weldingprocesses and parametersright at the weld joint.
Ingersoll Rand ultra-reliable industrial rotaryscrew compressor (Air Pak™ models only).30,000-hour life expectancy. Independenton/off control for applications not requiringcompressed air — allows greater fuel savingsand longer compressor service intervals.
Standard featuresinclude ArcReach®,digital preset weldmeters, automatic idle,120 V block heater and vandalism lockout (protects control panel and receptacles).
HDPOWDER
COAT
POWERFULGENERATOR
Vandalism lockout
3
ArcReach® Remote Control Technology
Big Blue® ArcReach® Additional Features
More arc-on time and reduced exposure to workplacehazards for operators can be realized using ArcReachbecause less time is spent going back to the welding powersupply to set process and arc amperage or voltage.
Auto-Process Select.™ Depending on connected accessory,the system automatically changes to stick or MIG/FCAW(with gas) if electrode positive polarity is detected or TIG or FCAW (no gas) if electrode negative polarity is detected,when ArcReach communication is established between theaccessory and the Big Blue — reducing the need to accessthe power supply.
Automatic return to panel settings. System automaticallyreturns to Big Blue setting when ArcReach communicationis terminated. For example, if the Big Blue is set to gougingat 500 amps and an ArcReach feeder is connected, the Big Blue will go to a MIG/FCAW process. If the feeder isdisconnected, the Big Blue will go back to its previoussetting (gouging at 500 amps).
Less operator fatigue by not needing to move or repositionheavy secondary weld leads bundled with control cords onthe jobsite. Control cables are not used.
Operator can precisely set arc amperage or voltage at theweld joint and monitor the actual arc voltage and currentdelivered to the weld using the digital meters on theaccessory. This removes guesswork when it comes toadhering to weld procedures.
Remote override of Big Blue. When an ArcReachaccessory is connected to a Big Blue the accessory has full control and the Big Blue controls are disabled. Whileunder ArcReach control, process and voltage/amperageadjustments are locked out, preventing accidental changesby personnel other than the welding operator.
Cross platform compatible. The same ArcReachaccessories that work on engine-driven equipment can alsobe used on select ArcReach-equipped XMT®, Dimension™
and PipeWorx 350 FieldPro™ power sources.
Reverse compatible. ArcReach-equipped power sourceswork with non-ArcReach accessories; however, thecomplete ArcReach benefit is only realized with theArcReach system.
Save time by no longer needing to troubleshoot weldingsystem problems that result from damaged control cords.
Eliminate costly control cord repairs because controlcords are not used.
ArcReach provides remote amperage and voltage control at the weld joint without needing a control cord.
Increased productivity
MOREWELDSIN LESSTIME
Improved weld quality
BETTERWELDSWITH LESSREWORK
Reduced maintenance
FEWERCABLESTO MAINTAIN
Improved flexibilty
FLEET COMPATIBILTY
Remote control of the power sourcewithout a control cord.An ArcReach system allows you to changeweld settings from your ArcReach feederor remote, saving a trip to the powersupply. ArcReach technology uses theexisting weld cable to communicatewelding control information between thefeeder or remote and the power source.This technology eliminates the need forcontrol cords, and their associatedproblems and costs.
ArcReach engine drive
ArcReach feeder or remote
4
Inte
rnat
iona
lU
SA
Performance Data
CompressorBrand
Ingersoll RandCE55 G1
Free Air Delivery
Idle: 40 cfm (1.13 m3/min.)Weld: 60 cfm (1.70 m3/min.)
Features
Rotary screw with electric clutch for on/off. Oil change intervals of 500 hours. Lifeexpectancy of 30,000 hours.
WorkingPressureConstant
100 psig(7 bar)
DutyCycle
100%
Oil Capacity
4 qt. (3.79 L)
AutomaticCompressorShutdowns
Oil temperature
Air Compressor (Air Pak models only.)
Engine Specifications (Engines warranted separately by the engine manufacturer.)
EngineBrand
Deutz TD2.9 L4
DeutzTD2011L04w
Features
EPA Tier 4 Final compliant,includes 120 Vblock heater
EPA Tier 4icompliant,includes oil panand intakemanifold heater
Model
Big Blue 800 Duo Pro
Big Blue 800 Duo Air Pak
Big Blue 800XDuo Air Pak
HP
65.7
63.4
Type
Turbo-charged four-cylinder, liquid-cooledindustrial diesel
EngineSpeeds
Idle: 1,350 rpmWeld: 1,800 rpm
Capacities
Fuel: 25 gal. (95 L)Oil: 8.5 qt. (8 L)Coolant: 16 qt. (15.2 L)
Fuel: (95 L) 25 gal.Oil: (10.4 L) 11 qt.Coolant: integrated oil
Automatic EngineShutdown
Low oil pressure, high coolanttemperature, low fuel level
Low oil pressure, high coolanttemperature, low fuel level
Specifications (Subject to change without notice.)
Weld Mode/Process
CC/DC(Stick/TIG)
CV/DC(MIG/FCAW)
Output Mode
Separate(dual outputs)
Paralleled(combined)
Separate(dual outputs)
Paralleled(combined)
WeldOutputRange
20–400 A
40–800 A
14–50 V
14–50 V
Weld Output at 100% Duty CycleRated at 104°F (40°C)
400 A at 36 V* (each side)
700 A at 44 V*800 A at 38 V
400 A at 34 V* (each side)
750 A at 40 V*800 A at 38 V
Max. Open-CircuitVoltage
85 VDC30 VDC**
Generator Power OutputRated at 104° F (40° C)***
3-phase: 27,000 watts peak 20,000 watts continuous
1-phase: 15,000 watts peak12,000 watts continuous
Dimensions
H: 46 in. (1,168 mm)W: 28.5 in. (724 mm)D: 69.5 in. (1,765 mm)Add 7.5 in. (191 mm) toheight for exhaust pipe
Net Weight
Duo Pro1,869 lb. (847.8 kg)
Duo Air Pak2,095 lb. (968.4 kg)
Add 165 lb. (75 kg)when fuel tank is full
Sound Levels at 23 ft. (7 m)
Idle:71.3 dB (96.1 Lwa)Weld (800 A load):78.9 dB (103.7 Lwa)
*Meets NEMA and IEC ratings. **Sense voltage for stick and Lift-Arc™ TIG. ***Will operate either 60 Hz or 50/60 Hz power tools, lights, etc.
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Fuel Consumption Curve
0.00
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
0 100 200 300 400 600 700 800500
US
Gal
./Hr.
DC Weld Amperes at 100% Duty Cycle
Idle
Idle
Simultaneous Welding And Power
No Weld Output
200 A at 28 V
300 A at 32 V
400 A at 36 V
500 A at 40 V
600 A at 40 V
700 A at 44 V
800 A at 44 V
*Single-phase listings include 4,000 watts from the exciter stator.
Weld AmperesTotal Aux. Power Available (Watts)
1-Phase* 3-Phase
16,000
16,000
16,000
16,000
14,000
10,500
6,500
4,000
20,000
20,000
20,000
18,000
12,500
8,700
0
0
Paralleled arcs with air output(Air Pak only)
Paralleled arcs
Dual arcs
- or -
Note: Big Blue models are rated at IP23S.
12
13
16
18
1920
17
15
14
3
2
7
8
6
10
9
11
21
232425
26
22
A
B
1
5
4
5
Function Guide 1. Self-calibrating digital weld meters with fault code indication
display preset or actual weld parameters.
2. Weatherproof Lexan® nameplate is super durable and resistscracking and fading.
3. Operator controls. Independent controls for multi-arc welding. “A” controls are for single operator and “B” controls are for asecond operator.
4. Weld process selection switch
5. Pushbutton main control knob used for adjusting amperage/voltage, adjusting arc control, and accessing the service menu.
6. Adjustable arc control adjusts DIG when process control is instick modes and adjusts inductance when process control is in FCAW or MIG modes. The amount of DIG determines howmuch amperage (heat) varies with stick arc length. Inductancedetermines the “wetness” of the weld puddle.
7. Electronic engine display can display fuel level, engine hours,coolant temperature, oil pressure, battery volts, engine rpm, airpressure, and compressor hours simultaneously or one at a time.Also tracks oil change intervals and displays engine diagnosticsfor service technicians.
8. USB port allows software updates from a USB drive. A summaryfile of recoded data from the unit will be saved to a USB drivethat is inserted.
9. Air compressor on/off switch (Air Pak™ models only)
10. Engine control switch is used to start engine and then selectbetween auto idle and high speed lock. Glow plug operation iscontrolled by the engine control module and automatically occurs as needed by ambient conditions.
11. Standard 14-pin receptacle for simple connection of remotecontrols and wire feeders. Includes Auto Remote Sense™ whichautomatically switches from panel to remote amperage/voltage (A/V) control with remote connected. Eliminates confusion of apanel/remote switch.
12. Separate/parallel switch. Use switch to select single operator mode (A) or dual operator mode (A/B).
13. Weld output terminals
Receptacles and circuit breakers – USA models
15. 50 A, 240 V, three-phase receptacle(For matching plug, order 254140.)
16. 50 A, 120/240 V receptacle (For matching plug, order 119172.)17. 20 A, 240 V receptacles18. 20 A, 120 V receptacles with ground fault19. 50 A circuit breaker 20. 20 A, 240 V circuit breaker21. 20 A, 120 V circuit breakers
Receptacles and circuit breakers – International models
22. 20 A, 120 V receptacles with ground fault23. 240 V earth leakage circuit breaker24. 32 A, 400 V three-phase receptacle
(For matching plug, order 255421.)25. 30 A, three-phase circuit breaker 26. 120 and 240 V circuit breakers27. 16 A, 120/240 V receptacles
(For matching plugs, order 255419 for 120 V and 255416 for 240 V.)
Control panel – all models
Terminal panel – all models
6
Genuine Miller® Accessories
Desiccant Air Dryer System195117 Side mount195117001 Rear mountFor Air Pak™ models only. A regenerating inlineair dryer system that eliminates moisture in theair stream to prevent air tool freeze-ups in coldclimates. Internal thermostat and heating elementsensure good air quality in all climates. The systemcan be mounted on the side or on the rear of themachine to meet your installation requirements.
Full KVA Adapter Cord 300517 FieldNEMA 14-50P to NEMA 6-50R. Adapts enginedrive 120/240 V plug to common Millermatic®
and Spectrum® 240 V plug.
Full KVA Plug Kit Field119172 1-phase,120/240 V, 50 A plug (NEMA 14-50P) 254140 3-phase,240 V, 50 A plug (NEMA 15-50P)
International Plugs Field255419 1-phase,120 V, 16 A plug255416 1-phase,240 V, 16 A plug255421 3-phase,400 V, 32 A plug
Engine Filter Kits262459 Field. For USA models246988 Field. For International modelsIncludes all filters required for proper enginemaintenance. Oil filter, primary and secondaryfuel filter, and primary air filter.
Compressor Kit 279121 Field For Air Pak models only. Includes oil and allfilters required for proper compressor main -tenance. Oil filter, air filter and coalescing filter.
Spark Arrestor Kit 195012 FieldPrevents particlesfrom leaving themuffler that could
potentially start a fire. Mandatory whenoperating on California grasslands, brush, orforest-covered land, and in all national forests.For other areas, check your state and local laws.Meets U.S. Forest Service standard 5100-1B.
FA-1D Lockable Flame ArrestorFuel Cap 043947 FieldFuel cap can be padlocked toprevent vandalism. A built-in flamearrestor prevents flames or sparksfrom entering the fuel tank.
Cable Holder 043946 FieldSaddle-bag-style cableholder. Convenient wrap-around storage of coiledcable for transportation.Stores 100 feet of 2/0 cableon each side.
Note: For best results do not weld when cable is coiled!Protective cover cannot be used with cable holder.
Protective Cover 301113 FieldBlue water-resistantcanvas cover resistsstains and mildew, andprotects the finish ofyour welder.
Note: Protective cover cannot be used with cable holder.
MIG (GMAW) or Flux-cored (FCAW)
SuitCase® 12RC Wire Feeder 951580Lightweight and flexibleenough to run a varietyof wires up to .062-inchdiameter. Includesremote voltage control,drive roll kit and MIGgun. See literature M/6.5.
ArcReach® SuitCase® 8951726 With Bernard™ BTB Gun 300 A951727 With Bernard™ S-Gun™
951728 With Bernard™ Dura-Flux™ gunArcReach® SuitCase® 12951729 With Bernard™ BTB Gun 300 A951730 With Bernard™ S-Gun™
951731 With Bernard™ Dura-Flux™ gunPortable feeder designed to run off of arc voltage.When paired with an ArcReach power source,provides remote control of the power sourcewithout a control cord — saving time and money.See literature M/6.55.
ArcReach® Smart Feeder 951733 For use with ArcReach models only (see page 2for more information). Includes drive rolls andBernard™ PipeWorx 300-15 MIG gun. For MIG,FCAW, and advanced RMD® and pulse processes.See literature M/6.55.
MIG (GMAW)/Flux-cored (FCAW) GunsSee Bernard™ literature SP-BTB for BTB air-cooled MIG guns, and SP-DF for Dura-Flux™
self-shielded flux-cored guns.
Spoolmatic® 30A Spool Gun130831Air-cooled, 200-amp, one-poundspool gun for
aluminum and stainless MIG. See literatureM/1.73. Requires WC-24 Control (137549).
XR™ Wire Feeders and GunsPush-pull system designed to handle difficult-to-feed soft alloy wires such as aluminum. See literature M/1.7 through M/1.75.
AC TIG (GTAW) Welding
Dynasty® 210 SeriesFor portable AC/DC TIG. See literature AD/4.81.
FemaleReceptacle
7
4 West Four-Wheel Steerable Off-Road Trailer 042801A heavy-duty 2,550-pound (1,157 kg) capacitytrailer designed for use in mines, quarries, andother rough terrain. Has narrow 22-foot (6.7 m)turning radius. Includes 3-inch (76 mm) lunetteeye, universal hitch and safety chains.
HWY-225 Trailer 301338 A 2,700-pound (1,225 kg) capacity highwaytrailer with welded steel tubing frame, heavy-dutyaxle with roller bearing hubs and leaf-springsuspension. Includes jack stand, fenders, lights,and dual hitch with 2-inch (50 mm) ball hitchand 3-inch (76 mm) lunette eye.
Cable Tree 043826For use with HWY-225. Provides an area to conveniently wrap weld cables and extension cords.
Dual Hitch 301441For use with HWY-225. 2-inch (50 mm) ballhitch and 3-inch (76 mm) lunette eye in onereversible assembly.
2-In-1 Document/Fire Extinguisher Holder301236For use with HWY-225.Stores documents and holdsa 5-pound fire extinguisher.
Note: Holder shown mountedon trailer. Fire extinguisher not included.
Trailers and Hitches (Note: Trailers are shipped unassembled.)
Plasma Cutting
Spectrum 375 X-TREME and 625 X-TREME shown.
Spectrum® 375 X-TREME™ 907529See literature PC/9.2.Spectrum® 625 X-TREME™ 907579See literature PC/9.6.Spectrum® 875 907583See literature PC/9.8.
The Spectrum 375 X-TREME and 625 X-TREMEcome complete with protective X-CASE™
(not shown).
Stick/TIG Remote Controls
ArcReach® Stick/TIGRemote 301325When paired with an ArcReach powersource, providesremote control ofthe power sourcewithout a cord —
saving time and money. See literature AY/14.5.
Wireless Remote HandControl 300430For remote current, voltageand contactor control.Receiver plugs directly intothe 14-pin receptacle of Miller
machine. 300-foot (91.4 m) operating range.Wireless antenna kit 300749 recommended.
Wireless Antenna Kit 300749Optional when improved reception is desired.
RHC-14 Hand Control 242211020Miniature hand control for remote current,voltage and contactor control. Dimensions: 4 x 4 x 3.25 inches (102 x 102 x 82 mm).Includes 20-foot (6 m) cord and 14-pin plug.
Extension Cables for 14-Pin Remote Controlsor 24 VAC Wire Feeders242208025 25 ft. (7.6 m)242208050 50 ft. (15.2 m)242208080 80 ft. (24.4 m)
Genuine Miller® Accessories (Continued)
4 holes H
Front Panel
EFG
D
A B
C
Mounting Specifications
Trailer Specifications (Subject to change without notice.)
Gross VehicleWeight Rating
3,000 lb.(1,361 kg)
2,999 lb.(1,360 kg)
Gross AxleWeight Rating
2,000 lb./axle (907 kg/axle)
3,500 lb.(1,588 kg)
Height of Bed
21.25 in.(540 mm)
19 in.(483 mm)
RoadClearance
8 in.(203 mm)
7.5 in.(191 mm)
NetWeight
430 lb.(195 kg)
280 lb.(127 kg)
Track (Centerto center oftires)
55.25 in.(1,403 mm)
50 in.(1,270 mm)
Standard Tires(Standard ratingor P-size rating)
B78-13
ST175/80R-13Load Range D
Dimensions
Length: 91 in. (2,311 mm)*Width: 61.25 in. (1,556 mm)
Length: 105.5 in. (2,680 mm)Width: 56.5 in. (1,435 mm)**
*Does not include tongue. **Width at outside of fenders.
Model
4 West
HWY-225
NetPayload
2,550 lb.(1,157 kg)
2,700 lb.(1,225 kg)
Height: 46 in. (1,168 mm) to top of cover Add 7.5 in. (191 mm) to heights for exhaust pipe(Exhaust measurement subject to change.)
Width:28.5 in. (724 mm) (mounting brackets turned in)30.75 in. (781 mm) (mounting brackets turned out)
*With mounting brackets in center position. Dimensions vary with location of mounting brackets.
A. 29.812 in. (757 mm)B. 27.5 in. (699 mm)C. 1 in. (25 mm)D. 11.625 in. (295 mm)*E. 46.375 in. (1,178 mm)*F. 58 in. (1,473 mm)*G. 69.5 in. (1,765 mm)H. .562 in. (14 mm) dia.
© 2018 Miller Electric Mfg. LLC
Distributed by:
Equipment and Options Stock No. Description Qty. Price
Big Blue® 800 Duo Pro 907751 Base model with 240-volt 3-phase power, ArcReach® and vandalism lockout kitEPA Tier 4 Final compliant engine
Big Blue® 800 Duo Air Pak™ 907752 Base model with 240-volt 3-phase power, ArcReach® and vandalism lockout kit EPA Tier 4 Final compliant engine 907752001 Welder truck specific model with ArcReach®. See page 2 for more information 907752002 Welder truck specific model with ArcReach® and rear-mounted desiccant air dryer system. See page 2 for more information
Big Blue® 800X Duo Air Pak™ 907763 International model with EPA Tier 4i compliant engine, 400-volt 3-phase power, (NOT available for sale in the USA) ArcReach® and vandalism lockout kit
Field Accessories
Desiccant Air Dryer System 195117 Side mount(Air Pak models only) 195117001 Rear mount
Full KVA Adapter Cord 300517
Full KVA Plug Kits See page 6
International Plugs See page 6
Engine Filter Kits See page 6
Compressor Kit (Air Pak™ models only) 279121 Includes oil, plus air, oil and coalescing filters
Spark Arrestor Kit 195012
FA-1D Lockable Flame Arrestor Fuel Cap 043947 Padlock NOT included
Cable Holder 043946 Stores up to 200 feet of 2/0 cable
Protective Cover 301113 Canvas cover — will not fit over machine with cable holder attached
MIG/Flux-cored Welding
SuitCase® 12RC 951580 With Bernard™ BTB Gun 300 A. See literature M/6.5
ArcReach® SuitCase® 8 951726 With Bernard™ BTB Gun 300 A. See literature M/6.55 951727 With Bernard™ S-Gun™
951728 With Bernard™ Dura-Flux™ gun
ArcReach® SuitCase® 12 951729 With Bernard™ BTB Gun 300 A. See literature M/6.55 951730 With Bernard™ S-Gun™
951731 With Bernard™ Dura-Flux™ gun
ArcReach® Smart Feeder 951733 MIG/FCAW/RMD®/pulse feeder with Bernard™ PipeWorx 300-15 MIG gun. Tweco®-style connectors. See literature M/6.55
MIG (GMAW) and Flux-cored (FCAW) Guns See Bernard™ literature SP-BTB and SP-DF
Spoolmatic® 30A Spool Gun 130831 Requires WC-24 Control. See literature M/1.73
WC-24 Control 137549 See literature M/1.73
XR™ Wire Feeder Control and Guns See literature M/1.7 through M/1.74
AC TIG Welding See page 6
Plasma Cutting See page 7
Stick/TIG Remote Controls
ArcReach® Stick/TIG Remote 301325 For use with ArcReach models only
Wireless Remote Hand Control 300430 Wireless antenna kit 300749 recommended
RHC-14 Hand Control 242211020
Extension Cables See page 7
Trailers and Hitches
4 West Four-Wheel Steerable Trailer 042801 Trailer with lunette eye, universal hitch and safety chains. For off-road use
HWY-225 Trailer 301338 Trailer with lights, fenders and dual hitch. For highway use
Cable Tree 043826 Trailer-mounted cable holder for HWY-225
Dual Hitch 301441 Combination 2-inch (50 mm) ball hitch and 3-inch (76 mm) lunette eye in one reversible assembly for HWY-225
2-In-1 Document/Fire Extinguisher Holder 301236 Stores documents and holds a 5-pound fire extinguisher for HWY-225
Date: Total Quoted Price:
Ordering Information