Post on 29-Apr-2018
www.barrietrim.com52 Saunders Rd., Barrie ON L4N 9A8 | 705-739-2200
Barrie Trim & Mouldings
Product CataloguePoplar | knotty pine | Clear Pine | Red Oak | Hard Maple | Cherry | Primed F/J Poplar
TRIM DOORS STAIRS RAILINGS
it’s all in the details...
page 1
TABLE OF CONTENTS
Baseboards .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Casings .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Architraves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Door Stops, Door Jambs / Astrigal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Corner / Plinth Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Outside Corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Burlaps .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Panel Moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Shingle Moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Decorative Moulds .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Crown Moulding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Cap Moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Cove Moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Miscellaneous Moulds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Quarter Rounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Half Rounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Nosing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Reducers .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
T & G Panelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Backbands .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Hand Rails / Shoe Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Chair Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Bar Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Window Sills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Dressed Four-Side Lumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
DRAWING
2-Step Base
CODE / SIZE
BAS-3065/8” x 3-1/2”BAS-4125/8” x 4-1/4”BAS-5095/8” x 5-1/4”BAS-70111/16” x 7-1/4”
BAS-3005/16” x 3-1/4”BAS-4005/8” x 4-1/4”BAS-5035/8” x 5-1/4”BAS-70411/16” x 7-1/4”
Colonial Base
1867 Base BAS-51811/16” x 5-1/4”BAS-70211/16” x 7-1/4”
Antique Base BAS-78511/16” x 7-1/4”
BAS-4055/8” x 4-1/4”
Contemporary Base
BAS-5M711/16” x 5-1/4”
BAS-64711/16 x 6-1/4”
BAS-7A711/16 x 7-1/4”
Ornamental Base BAS-77313/16” x 7-1/4”
DRAWING CODE / SIZE
Prestige Base BAS-8033/4” x 8-1/2”
Bevel Base BAS-5085/8” x 5-1/4”BAS-7125/8” x 7-1/4”
Flat Base BAS-3015/16” x 3-1/4”BAS-4113/8” x 4”
Regal BaseBAS-5C911/16” x 5-1/4”BAS-7A111/16” x 7-1/4”
Ogee Base BAS-7K211/16” x 7-1/4”
Bevel Base BAS-73211/16” x 7-1/4”
BASEBOARDS
page 2
BASEBOARDSDRAWING CODE / SIZE
CASINGSDRAWING CODE / SIZE DRAWING CODE / SIZE
Ogee Casing Bevel Casing
Contemporary Casing Contemporary Casing
CAS-3V63/4” x 3-1/2”
CAS-3T23/4” x 3-1/2”
CAS-3X83/4” x 3-1/2”
CAS-2M43/4” x 2-3/4”
CAS-3023/4“ x 3-1/4”
2-Step Casing CAS-2133/4” x 2-1/4”
CAS-2193/4” x 2-3/4”
CAS-3003/4” x 3-1/4”
Casing CAS-2F33/4” x 2-3/4”
Regal Casing CAS-2F23/4” x 2-3/4”
CAS-3J83/4” x 3-1/4”
Colonial CasingCAS-2063/4” x 2-1/2”
CAS-2553/4” x 2-3/4”
CAS-3143/4”x 3-1/4”
Contemporary Base BAS-7K311/16” x 7-1/4”
page 3
DRAWING CODE / SIZE
Symmetrical Casing
1867 Casing
Antique Casing
Ornamental Casing
DRAWING CODE / SIZE
Prestige Casing
Bevel Casing
Thin Colonial Casing
Thin Flat Casing
CAS-3053/4” x 3-1/4”
CAS-4003/4” x 4”
CAS-3183/4” x 3-1/2”
CAS-4451-5/16” x 4-1/4”
CAS-3F53/4” x 3-1/2”
CAS-3F63/4” x 3-3/4”
CAS-2143/4” x 2-1/2”
CAS-2033/8” x 2-1/8”
CAS-2083/8” x 2-1/4”
CASINGS
DRAWINGArchitrave
CODE / SIZE
ARC-4011-3/4” x 4-3/4”
ARCHITRAVES
page 4
DRAWING
Colonial Door Stop
CODE / SIZE DRAWING CODE / SIZE
STO-1005/16” x 1-1/4”
DOOR STOPS
Colonial Door Stop
Bullnose Door Stop
STO-1015/16” x 1-5/8”
STO-1021/2” x 1-1/2”
STO-1115/16” x 1-1/4”
STO-1125/16” x 1-5/8”
Bevel Door Stop STO-1395/16” x 1-1/4”
Contemporary Door Stop STO-1741/2” x 1-1/2”
STO-1039/16” x 1”
Glass Stop
Backer Strip BAC-2001/2” x 2”
DOOR JAMB / ASTRIGALDRAWING CODE / SIZE DRAWING CODE / SIZE
Astrigal Door Jamb
Bevel Door Jamb
AST-2001-1/4” x 2-1/4”
JAM-4023/4” x 4-5/8”
JAM-6003/4” x 6-5/8”
JAM-1X53/4” x 4-5/8”
JAM-1X63/4” x 5-1/2”
JAM-1X73/4” x 6-5/8”
page 5
DRAWING
Corner Block
CODE / SIZE
COR-2009/16” x 2-1/2”
Outside Corner OUT-0013/4” x 3/4”
DRAWING CODE / SIZE
Decorative Corner OUT-0081” x 1”
Plinth Block
CORNER / PLINTH BLOCKS
DRAWING CODE / SIZE DRAWING CODE / SIZEOUTSIDE CORNERS
COR-2227/8” x 2-7/8”COR-3017/8” x 3-1/8”COR-3067/8” x 3-5/8”COR-4007/8” x 4-1/4”COR-5017/8” x 5”
PLI-2227/8” x 2-7/8“ x 6”PLI-3017/8” x 3-1/8” x 6”PLI-3067/8” x 3-5/8” x 8”PLI-4007/8” x 4-1/4” x 8”
OUT-0071” x 1”
OUT-1051-1/4” x 1-1/4”
Colonial Burlap BUR-1015/16” x 1-1/4”
Bullnose Burlap BUR-1055/16” x 1-1/4”
DRAWING CODE / SIZE DRAWING CODE / SIZEBURLAPS
BUR-1025/16” x 1-5/8”
BUR-2015/16” x 2”
BUR-1065/16” x 1-5/8”
page 6
Panel MouldPAN-0011/2” x 7/8”1/4” offset
Panel Mould
Panel Mould PAN-1013/16” x 1-3/8”1/2” offset
PAN-1033/4” x 1-7/8”3/4” offset
DRAWING CODE / SIZE DRAWING CODE / SIZEPANEL MOULDS
Shingle Mould Shingle MouldSHI-0021/2” x 3/4”
SHI-3081-1/4” x 3-1/4”
DRAWING CODE / SIZE DRAWING CODE / SIZESHINGLE MOULDS
SHI-1023/4” x 1-1/4”
SHI-1013/4” x 1-5/8”
SHI-2031-1/4” x 2-1/4”
page 7
DRAWING
Screen Mould
CODE / SIZE
SCR-0011/4” x 3/4”
DEC-0071/2” x 7/8”
Inset Panel Mould
Provincial MouldPRO-1047/16” x 1-1/4”
Bead MouldBEA-0013/8” x 3/4”
Decorative MouldDEC-0223/8” x 11/16”
Contemporary Panel MouldDEC-0667/16” x 11/16”
Inset Decorative MouldDEC-1037/16” x 1-1/16”
DRAWING CODE / SIZE
Symmetrical MouldDEC-0053/8” x 3/4”
Bead Mould BEA-1001/2” x 1”
Decorative MouldDEC-0651/2” x 7/8”
Decorative MouldDEC-0067/16” x 3/4”
decorative MouldDEC-1233/4” x 1-1/4”
DECORATIVE MOULDS
DEC-1025/8” x 1-1/4”
DEC-1053/4” x 1-5/8”
Contemporary Bead MouldBEA-1161/2” x 1-1/2”
page 8
DRAWING
Colonial Crown
CODE / SIZE
CRO-20211/16” x 2-1/4”
BED-0013/8” x 3/8”
Bed Mould
Cabinet CrownCRO-3173/16” x 3-5/8”
Beaded DentilWR-CM7513/16” x 5-3/16”
Crown MouldCOV-22111/16” x 2-1/4”
COV-50911/16” x 5-1/4”
Decorative Crown
CRO-40213/16” x 4-15/16”
DRAWING CODE / SIZE
Double Cut DentilWR-CM743/8” x 3-3/4”
Symmetrical CrownCRO-3003/4” x 3-1/2”
CROWN MOULDING
WR-CM7313/16” x 5-1/2”
CRO-3023/4” x 3-1/4”CRO-40011/16” x 4-1/4”CRO-5003/4” x 5-1/4”CRO-7023/4” x 7-1/4”
CRO-5013/4” x 5-1/4”
BED-10011/16” x 1-1/2”
BED-2013/4” x 2-1/2”
Decorative Crown
CRO-30111/16” x 3-7/8”
Decorative CrownCRO-42513/16” x 4-7/8”
page 9
DRAWING
Cove Mould
CODE / SIZE
COV-0011/2” x 1/2”
COV-4011” x 4-1/4”
Cove Mould
DRAWING CODE / SIZE
Decorative Cove Mould
COV-22111/16” x 2-1/4”
COVE MOULDS
COV-0033/4” x 3/4”
COV-1031-1/16” x 1-1/16”
Cap MouldCAP-1093/4” x 1-5/8”
Colonial Cap MouldCAP-1001-3/16” x 1-1/8”3/8” offset
Colonial Cap MouldCAP-1041-1/16” x 1-3/8”
CAP-2001-5/8” x 2-1/4”3/4” offset
DRAWING CODE / SIZE DRAWING CODE / SIZECAP MOULDS
Colonial Header Cap
Contemporary Header Cap
CAP-2221-1/2” x 2-1/4”3/4” offset
page 10
DRAWING
Half Round
CODE / SIZE
HAL-0051/4” x 1/2”
HALF ROUNDS
HAL-0013/8” x 3/4”
HAL-1001/2” x 1”
HAL-3001-1/2” x 3”
HAL-10213/16” x 1-5/8”
HAL-2001” x 2”
HAL-1015/8” x 1-1/4”
DRAWING
Pilaster
CODE / SIZE
PIL-4003/4” x 4”
Brick Mould BRI-1031-1/4” x 1-5/8”
DRAWING CODE / SIZEMISCELLANEOUS MOULDS
PIL-6003/4” x 6”
Shoe Mould SHO-0011/2” x 3/4”
QUA-00411/16” x 11/16”
Quarter Round
Quarter Round QUA-0011/4” x 1/4”
QUARTER ROUNDS
Vintage Quarter Round
QUA-0061/2” x 1/2”QUA-0093/4” x 3/4”
QUA-1021” x 1”
QUA-0033/4” x 3/4”
DRAWING CODE / SIZE DRAWING CODE / SIZE
page 11
DRAWING
Nosing
CODE / SIZE
NOS-3051-1/16” x 3-1/2”For 3/4” floor
NOS-4011-1/16” x 4-1/4”For 3/4” floor
Nosing
DRAWING CODE / SIZE
Nosing NOS-4001-1/16” x 4-1/4”For 5/16” floor
NOSING
DRAWING
Laminate Floor Reducer
CODE / SIZE
RED-1141/2” x 1-7/16”
RED-2023/4” x 2-1/4”For 3/4” floors
Reducer
DRAWING CODE / SIZE
“T” Reducer RED-1161/2” x 1-3/4“
REDUCERS
DRAWING
Threshold
CODE / SIZE
THR-5001-1/16” x 5/12”
DRAWING CODE / SIZE
Threshold THR-5013/4” x 5-1/2”
THRESHOLD
page 12
DRAWING
Centre V / V-Joint
CODE / SIZE
T&G-5009/16” x 5-1/4”
Reversable
T&G-5029/16” x 5-1/4”
Reversable
Pickwick / V-Joint
Pre-Packaged PanellingT&G-3033/8” x 3”
DBL Bead / V-JointT&G-3003/8” x 2-7/8”
Reversable
DRAWING CODE / SIZE
Aromatic CedarT&G-Aromatic3/8” x 3-5/8”
12. sq ft. per box
Single Bead/V-JointT&G-4095/8” x 4”
T & G PANELLING
32” and 96”bundles
Back Band BAC-1023/4” x 1-1/4”3/4” offset
Back Band BAC-12113/16” x 1-9/16”3/4” offset
CODE / SIZE
Back Band BAC-1741-5/8” x 1-5/8”3/4” offset
Bevel Back Band BAC-1D213/16” x 1-3/8”3/4” offset
DRAWING CODE / SIZE DRAWING CODE / SIZEBACKBANDS
Contemporary Back Band BAC-1543/4” x 1-1/4”3/4” offset
page 13
DRAWING
Plain Hand Rail
CODE / SIZE
HAN-2001-1/4” x 2-1/2”
HAN-2091-5/16” x 2-1/2”1-5/16” cutout
Oval Hand Rail
Plain Hand RailHAN-289F1-3/4” x 2-3/4”Groove 5/16” x 1-5/16”
Decorative Hand Rail HAN-205F1-3/4” x 2-1/2”Groove 5/16” x 1-5/16”
DRAWING CODE / SIZE
Shoe Rail
Plain Hand Rail
Plain Hand Rail
Oval Hand Rail
SHO-206F3/4” x 2-3/4”Groove 5/16” x 1-5/16”
HAN-297F1-3/4” x 2-3/4”Groove 5/16” x 1-3/4”
HAN-2291-5/16” x 2-5/8”
HAN-2481-3/4” x 2-3/4”
Oval Hand Rail HAN-2061-5/16” x 2-5/8”1-1/16” cutout
HAND RAILS / SHOE RAILS
HAN-305F1-3/4” x 3“Groove 5/16” x 1-3/4”
HAN-301F2-1/4” x 3“Groove 5/16” x 1-3/4”
HAN-302F2-7/8” x 3-1/4“Groove 1/2” x 1-1/2”
SHO-305F3/4” x 3”Groove 5/16” x 1-3/4”
page 14
DRAWING
Base Cap
CODE / SIZE
BAS-1003/4” x 1-1/2”
CHA-1061/2” x 1-3/8”
Chair Rail
Chair Rail
CHA-20413/16” x 2-1/2”
Chair RailCHA-3081-1/16” x 3-1/2”
Contemporary Chair Mould CHA-3347/8” x 3-1/8”
Chair Rail CHA-2093/4” x 2-1/4”
DRAWING CODE / SIZE
Chair RailCHA-2241-1/8” x 2-1/2”1/4” offset
Back Mould BAC-2051/2” x 2-1/2”
Chair Rail CHA-1105/8” x 1-5/8”
CHAIR RAILS
CHA-2023/4” x 2-1/8”
BAC-4051/2” x 4”
Picture Frame PIC-10213/16” x 1-1/2”
page 15
DRAWING
Wine Glass Mould
CODE / SIZE
WIN-2003/4” x 2-7/8”
Bar Rail BAR-5011-3/4” x 5-1/4”
DRAWING CODE / SIZEBar Rail BAR-301
1-1/4” x 3-5/8”
BAR RAILS
DRAWING
Window Sill
CODE / SIZE
SIL-2033/4” x 2-1/2”
SIL-3021-3/4” x 3-1/2”
Designer Window Sill Decorative Sill SIL-2191-1/4” x 2-1/2”
SIL-3041-1/4” x 3-1/2”
DRAWING CODE / SIZE
Window Sill SIL-2021-1/4” x 2-1/2”
WINDOW SILLS
SIL-3053/4” x 3-1/2”
SIL-5023/4” x 5-1/2”
SIL-7023/4” x 7-1/4”
SIL-3061-1/4” x 3-1/2”
SIL-5031-1/4” x 5-1/2”
page 16
DIMENSIONS *( ) DOTS = SPECIES AVAILABLEThickness Width Paint Grade Knotty Pine Clear Pine Red Oak Hard Maple Cherry Primed FJ Pine
1/41/4
1/4
1/4
1/4
1/4
5/16
5/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
3/4
7/8
2-1/2
3-1/2
5-1/2
7-1/4
1-5/16
1-3/4
1/2
3/4
1-1/2
2
2-1/2
3-1/2
5-1/2
7-1/4
3/4
1-1/4
1-1/2
1-3/4
2
2-1/2
3-1/2
4-5/8
5-1/2
6-5/8
7-1/4
9-1/4
11-1/4
1
1-1/4
2-1/2
3-1/2
5-1/2
7-1/4
1-5/8
2-1/2
3-1/2
5-1/2
7-1/4
9-1/4
11-1/4
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
•
*NOTE: Not all species may be in stock. Call to check availability.
• ••• ••
•• • ••• • ••• •• •
• • • ••• • • ••• • ••• • • ••• • • ••
•• • ••• • •••• • •••• • ••• ••
• •
• ••
•• •
••• •••• • •••• • • • •••• • • •••• • • •••••• •
•• •••• ••
•• ••• •••• •••• •
••••
•••
•• •
•••
••••
•••
•• ••
•
• ••
• •
••• • • • ••
• •
• •• •••• ••• •
DRESSED FOUR-SIDE LUMBER
Flex D4S
3/4” x 3-1/2”
3/4” x 5-1/2”
3/4” x 7-1/4”
page 17
page 18
CUSTOM PROFILESAlong with the profiles in this catalogue we are able to offer custom profiles. We already have tooling for thousands of other profiles,and if necessary we can create tooling for any shape you require.
SPECIAL WOOD TYPESAs well as offering any profile you require we can provide them in almost any type of wood you may want.
GLOSSARY OF TERMSARCHITRAVES: In classical architecture, it described the mainbeam resting on the tops of the columns. Today it is often usedas a decorative moulding for ornamentation or finishing at thetop of windows and doors.
BASEBOARDS: Baseboards are placed along the wall at the floor.They should be chosen to work in harmony with your casings tofinish and tie the room together. Baseboards are usually thinnerthan the casing.
BUILD-UPS: Combining two or more moulding profiles to createa new or custom look. Also called stacking, build-ups make it easyto create the look of custom made trimwork without the highcost.
CASING: Casings define the overall character of a room and areoften the most visible part of the trim. They are used primarily tocover the gap between drywall and the door or window frame.Casings are generally thicker than the base mouldings.
CROWNS: Crowns are placed along the wall at the ceiling. Theycome in a wide range of patterns and sizes. Crowns soften thetransition from wall to ceiling while adding a distinctive look andcharm to your room.
FINISH BOARDS: Finish Boards come in either S4S (Surfaced 4Sides) or S3S (Surfaced 3 Sides) and are used for a multitude ofpurposes including shelving, window liner, bases, casing, etc.
PANEL MOULDS: Panel Moulds are used to frame wall panelingand add an accent to your walls. Often used in furnitureconstruction.
RAKE MOULD: Rakes are often used as crowns. In fact, they aresometimes called “solid crowns”.
WAINSCOT: Trimwork installed in the area below a chair rail.Numerous options are available including raised panel, shadowbox and beaded. Combined with a chair rail and baseboard,Wainscoting creates a dramatic look to any room.
WINDOW STOOL: Also called window sill, a Window Stool is thesurface installed below the sash of a window. Trim installed underwindow stool creates a distinctive look and adds a decorativetouch.
TRIM DOORS STAIRS RAILINGS
TRIM DOORS STAIRS RAILINGS
It’s all in the details... adding value to your home since 1985
Founded as a small retail shop, Barrie Trim and Mouldings has grown Substantially over the years. We supply andinstall trim and doors along with stairs and railing to builders, contractors and home owners. We manufacture ourstairs in house, and custom install them along with our railings and spindles. With a large showroom andexperienced staff, we are always willing to go the extra mile to help you pick out your material with ease. On-siteQuotations and consultations are provided to ensure the end result fits your needs and budget.
To learn more about our company visit barrietrim.com
Mon to Fri 7am-5pm | 52 Saunders Road, Barrie | 705-739-2200 | 1-800-265-3465 | www.barrietrim.com