Post on 19-Oct-2020
34 hrs
3 pcs
f
0.15 mm
k
0.40 mm
h
PLA
373 g
d
MK3/S
Summary
Print, assemble and program your own intelligent Smart Plant Pot. With ahidden water reservoir, pump and sensors why not make your plant careeasy.
With an Arduino Nano at its core this project uses a water level sensor tolet you know when to refill the concealed tank and a solid moisture sensorto figure out when to water your plant based on its needs.
Household > Outdoor & Garden
Here is the video instructions for assembly: https://youtu.be/T_tpKoNCVYw
========== CORRECTION: 4:05 into the video I incorrectly say to use20cm wires to connect the water level sensor. The correct length is 35cm.
List of items used in this project and where to find them (the links areAmazon affiliate links and help to support this channel at no cost to you):
DIY Machines
Automatic SmartPlant Pot - Arduino,Self Watering,Project
VIEW IN BROWSER
updated 7. 5. 2019 | published 7. 5. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
3.9 MB
6.17 hrs f 0.15 mm k 0.40 mm h PLA 77.00 g d MK3/S
updated 7. 5. 2019
11.8 MB
10.35 hrs f 0.15 mm k 0.40 mm h PLA 105.00 g d MK3/S
updated 7. 5. 2019
■ Arduino Nano: https://geni.us/ArduinoNanoV3 ■ Mini submersible pump:https://geni.us/MiniPump ■ 5mm tubing: https://geni.us/5mmTubing ■Transistor: https://geni.us/2npn2222 ■ Resistors (1k and 4.7k): https://geni.us/Ufa2s ■ Wire: https://geni.us/22AWGWire ■ 3mm LED: https://geni.us/LEDs ■ Water level sensor: https://geni.us/WaterLevelSensor ■Nuts and Bolts: http://geni.us/NutsAndBolts ■ Soil moisture sensor: https://geni.us/MoistureSensor ■ Half Perma-proto board: https://geni.us/HalfPermaProto ■ PLA Filament: https://geni.us/PLAFilament
■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun ■Battery powered soldering iron: http://bit.ly/SealeySDL6
==========
The code can be downloaded from here: https://github.com/DIY-Machines/Smart...
==========
SAY THANKS:
Buy me a coffee to say thanks: https://ko-fi.com/diymachines Support uson Patreon: https://www.patreon.com/diymachines
SUBSCRIBE: ■ https://www.youtube.com/channel/UC3jc...
INSTAGRAM: https://www.instagram.com/diy_machine... FACEBOOK: https://www.facebook.com/diymachines/
Disclaimer: This video is shared for demonstration purposes only.
stand_015mm_pla_mk3.gcode
inner-pot_015mm_pla_mk3.gcode
13.5 MB
17.83 hrs f 0.15 mm k 0.40 mm h PLA 191.00 g d MK3/S
updated 7. 5. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
28.8 KBupdated 7. 5. 2019
50.6 KBupdated 7. 5. 2019
89.0 KBupdated 7. 5. 2019
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
outer-pot_015mm_pla_mk3.gcode
outer-pot.stl
stand.stl
inner-pot.stl