Post on 04-Mar-2021
AUTOMATED SYSTEM – APPLICATION OF AHP AND TOPSIS ANALYSIS FOR PRODUCTIVITY
IMPROVEMENT
MOHD HALIM BIN YAKOP
MASTER OF MANUFACTURING ENGINEERING (INDUSTRIAL ENGINEERING)
2018
brought to you by COREView metadata, citation and similar papers at core.ac.uk
provided by Universiti Teknikal Malaysia Melaka (UTeM) Repository
Faculty of Manufacturing Engineering
AUTOMATED SYSTEM – APPLICATION OF AHP AND TOPSIS ANALYSIS FOR PRODUCTIVITY IMPROVEMENT
Mohd Halim Bin Yakop
Master of Manufacturing Engineering (Industrial Engineering)
2018
AUTOMATED SYSTEM – APPLICATION OF AHP AND TOPSIS ANALYSIS FOR PRODUCTIVITY IMPROVEMENT
MOHD HALIM BIN YAKOP
A thesis submitted in fulfilment of the requirements for the degree of Master of
Manufacturing Engineering in Industrial Engineering
Faculty of Manufacturing Engineering
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
2018
DECLARATION
I declare that this thesis entitled “An Effect of Surface Roughness to Colour Sensor
Detection Range in Ambient Temperature” is the result of my own research except as cited
in the references. The thesis has not been accepted for any degree and is not concurrently
submitted in candidature of any other degree.
Signature : ......................................................
Name : ......................................................
Date : ......................................................
APPROVAL I hereby declare that I have read this dissertation/report and in my opinion this
dissertation/report is sufficient in terms of scope and quality as a partial fulfilment of Master
of Manufacturing Engineering (Industrial Engineering).
Signature : …………………………….
Supervisor Name : ………………………….…
Date : …………………………….
DEDICATION
To my beloved family.
i
ABSTRACT
Productivity improvement in manufacturing industry is always the key focus to strengthen an enterprise cost position to stay ahead of competition. Increase in productivity can reduce the cost of work on the production unit or an increase in output. This study emphasises on enhancing the work method in food industry by proposing an automated practice that is imposed to eliminate waste activities for continuous improvement. Additionally, this study focuses at lekor shaping process in Zazihan Enterprise. The production report showed that the company is having a shortage for cheesy lekor ball due to low production rate compared to targeted demand. The objective of this study is to analyse the current method by using work study and identify all activities related to the shaping process for cheesy lekor ball. Apparently, based on multiple-criteria requirement, AHP and TOPSIS analysis were used to determine the best automated machine for the shaping process of replacing a manual method. Finally, the proposed method was evaluated, and the results indicated that the productivity improvement rate is increased by 860% which is from 45 to 432 bulk per week. Moreover, the number of worker has been reduced as the proposed method only requires a single person to operate while other workers can focus on producing different types of products at the same time.
ii
ABSTRAK
Peningkatan produktiviti dalam industri perkilangan selalu menjadi tumpuan utama untuk mengukuhkan kedudukan kos perusahaan untuk berada di hadapan persaingan. Peningkatan produktiviti dapat mengurangkan kos kerja pada unit pengeluaran atau peningkatan output. Kajian ini memberi penekanan untuk meningkatkan kaedah kerja dalam industri makanan dengan mencadangkan suatu amalan automatik yang dikenakan untuk menghapuskan aktiviti sisa untuk penambahbaikan yang berterusan. Kajian ini memberi tumpuan kepada proses pembentukan lekor di Zazihan Enterprise. Laporan pengeluaran menunjukkan bahawa syarikat mengalami kekurangan untuk bola lekor berkeju disebabkan oleh kadar pengeluaran yang rendah berbanding dengan permintaan yang disasarkan. Objektif kajian ini adalah untuk menganalisis kaedah semasa dengan menggunakan kajian kerja dan mengenal pasti semua aktiviti yang berkaitan dengan proses pembentukan bola lekor berkeju. Kemudian, berdasarkan pelbagai kriteria yang diperlukan, analisis AHP dan TOPSIS digunakan untuk menentukan mesin automatik yang terbaik untuk dicadangkan pada proses pembentukan untuk menggantikan kaedah manual. Akhir sekali, kaedah yang dicadangkan dinilai dan membuktikan bahawa kadar peningkatan produktiviti meningkat sebanyak 860% iaitu dari 45 hingga 432 kotak setiap minggu. Selain itu, bilangan pekerja dikurangkan kerana kaedah yang dicadangkan hanya memerlukan seorang untuk beroperasi manakala pekerja lain boleh memberi tumpuan kepada menghasilkan pelbagai jenis produk pada masa yang sama.
iii
ACKNOWLEDGEMENTS
Alhamdulillah, I am grateful to Allah S.W.T on HIS blessing and mercy for making this
Final Year Master Project is complete and successful. Thank to Allah, who made all things
possible. First, thanks to my supervisor, Dr Nadiah Binti Ahmad for her vital encouragement,
the understanding and assistance and for the constant reminders and much needed motivation
throughout my project. Special thanks to Zazihan Enterprise because the cooperation and
willingness to give me an opportunity to conduct this study in his company. Hopefully, this
study can afford a valuable benefit to both parties. Not forgetting, to all batch members,
thanks for the full cooperation, shared ideas, data and knowledge during the completion of
this project. Without the cooperation from the entire group members of course this project
cannot be finished completely.
Finally, yet importantly, I would like to give a special and greatest thank to my parents and
family for their moral support, understanding, motivation and patience, in which without
their support and love we may not be able to complete this dissertation. May Allah s.w.t.
reward you all for what the thing that you all had done.
Amin
iv
TABLE OF CONTENTS
PAGE DECLARATION APPROVAL DEDICATION ABSTRACT i ABSTRAK ii ACKNOWLEDGEMENTS iii TABLE OF CONTENTS iv LIST OF TABLES vi LIST OF FIGURES viii LIST OF APPENDICES ix LIST OF ABBREVIATIONS x CHAPTER
1. INTRODUCTION 1 1.1 Background of Study 1 1.2 Problem Statements 3 1.3 Objectives 4 1.4 Scope 4 1.5 Significance of Study 4 1.6 Research Planning 5 1.7 Outline of Thesis 5
2. LITERATURE REVIEW 6 2.1 Manufacturing 6 2.2 Productivity in Manufacturing 7 2.3 Productivity Improvement 2.4 Types of Waste 2.5 Automated in Food Industry 2.6 Food Safety 2.7 Work Study 2.8 Method Study 2.9 Work Measurement 2.9.1 Time Study 2.9.2 Rating Factor 2.9.3 Allowance 2.9.4 Standard Time 2.10 Decision Matrix Analysis 2.11 Worker Utilization 2.12 Process Producing Lekor
8 10 12 13 15 18 20 21 22 24 25 26 28 29
3. METHODOLOGY 31 3.1 Research Design 31 3.2 Primary Data 33 3.2.1 Time Study Analysis 35 3.2.2 Alternative Selection 3.2.2.1 Determine the Criteria
37 38
v
3.2.2.2 Determine the Criteria Weight by AHP 3.2.2.3 Ranking Alternative by TOPSIS 3.3 Secondary Data
39 41 43
4. RESULT & DISCUSSION 44 4.1 Cheesy Lekor Ball Shaping Process 44 4.2 Time Study Analysis 4.3 Decision Making Analysis 4.3.1 AHP Analysis 4.3.2 Alternative Machine 4.3.2.1 Alternative 1 (Fumu Machinery) 4.3.2.2 Alternative 2 (Runxiang Machinery) 4.3.2.3 Alternative 3 (Shandong Osaint) 4.3.2.4 Alternative 4 (Zengzhou Machinery) 4.3.3 Ranking Alternatives by TOPSIS Analysis 4.4 Discussion 4.4.1 Production Rate Analysis 4.4.2 Standard Operating Procedure 4.4.3 Worker Utilization
45 48 49 53 53 54 55 56 58 63 63 67 68
5. CONCLUSION & RECOMMENDATIONS 69 5.1 Conclusion 69 5.2 Recommendations 70
REFERENCES 72 APPENDICES 82
vi
LIST OF TABLES
TABLE TITLE PAGE
1.1 An average of monthly output of cheese lekor ball from April
to October 2017
3
2.1 Types of charts and diagrams 20
2.2 Performance rating table 23
3.1 Time study table. 36
3.2 Product specification per unit. 36
3.3 Pairwise comparison scale. 40
3.4 Random Index (RI) pairwise comparison matrix. 41
4.1 Observation time. 46
4.2 Rating factor selection. 46
4.3 Standard time of element. 47
4.4 Criteria priority ranking. 50
4.5 Aggregate pair-wise comparison matrix. 50
4.6 Normalized decision matrix. 50
4.7 Weights of each criteria. 51
4.8 Vector of weighted sums. 52
4.9 Specification of FM-028 54
4.10 Specification of WSSZ-602 55
4.11 Specification of OSMB - 200 56
4.12 Specification of RD - 028 57
4.13 Summary of available alternative. 57
4.14 Criterion rank score. 59
vii
4.15 Score distribution. 59
4.16 Normalize scores. 59
4.17 Weighted normalized decision matrix 60
4.18 Positive ideal solution. 60
4.19 Separation of positive ideal solution. 61
4.20 Negative ideal solution. 61
4.21 Separation of negative ideal solution. 62
4.22 Relative closeness coefficient. 62
viii
LIST OF FIGURES
FIGURE TITLE PAGE
2.1 Component of work study. 16
2.2 Flow diagram of method study. 19
2.3 Technique of work measurement. 21
2.4 Constituents of standard time. 25
2.5 Process of producing lekor. 30
3.1 Project process flow chart. 32
3.2 Process flow for collecting primary data. 34
3.3 Steps of evaluation procedure. 38
3.4 Sample hierarchy tree. 39
4.1 Cheesy lekor ball shaping process. 45
4.2 Percentage of standard time for each element in shaping process. 48
4.3 Hierarchy of Decision. 49
4.4 Normalized weights of each criteria. 51
4.5 Working process and finished product. 54
4.6 Fumu Machinery FM-028. 54
4.7 Runxiang Machinery WSSZ-602. 55
4.8 Shandong Osaint OSMB – 200. 56
4.9 Zhengzhou Machinery RD – 028. 57
4.10 Histogram Relative Closeness Value. 63
4.11 Production rate. 66
4.12 Comparison number of step in SOP of cheesy lekor ball. 68
4.13 Comparison number of worker required. 69
ix
APPENDICES
APPENDIX TITLE Appendix A Research Planning Gantt Chart
x
LIST OF ABBREVIATIONS
AHP
CI
CR
DMA
HACCP
ISO
MIDA
NIS
NT
PIS
PFD
PMA
RI
SDW
SIRIM
SME
Analytic Hierarchy Process
Consistency Index
Consistency Ratio
Decision Matrix Analysis
Hazard Analysis and Critical Control Points
International Standard Organisation
Malaysian Investment Development Authority
Negative Ideal Solution
Normal Time
Positive Ideal Solution
Personal Fatigue and Delay
Pugh Matrix Analysis
Random Index
Standardized Work
Scientific and Industrial Research Institute of Malaysia
Small Medium Enterprise
SS
ST
STR
TOPSIS
Stainless Steel
Standard Time
Time Reduction
Technique for Order Preference by Similarity to Ideal Solution
1
CHAPTER 1
INTRODUCTION
This chapter discusses an overview of the background, objectives and scope of the
study. It includes the primary focus of the reason and impact by conducting this study.
Additionally, a description of conducting this project and explanation of the results is
discussed.
1.1 Background of Study
Manufacturing can be defined as the transformation of materials and information into
goods for the satisfaction of human needs, Chryssolouris (2006). In the current highly
competitive business environment, the manufacturing industry is facing constant challenges
of producing innovative products at shortened time-to-market.
Nee et. al. (2012) agreed that this situation leads the product development processes
are increasingly more complex as products become more versatile, intricate and inherently
complicated, and as product variations multiply to address to the needs of mass
customisation. The core of improving manufacturing productivity can be summed up
essentially as precisely capture information that finds the losses, use that information to
identify the priorities, take thoughtful, thorough, and sustained action.
According to Amal and Gopinadhan (2016), productivity depends on various factors
like labour, machinery, capital, temperature, raw materials, quality etc. so each factor has its
own contribution. Optimizing the output is a big challenge; to achieve this goal the role of
every worker regarding the production department has a great importance. In this
2
environment, the problems regarding men and machines need to be concentrating to improve
the productivity and operational efficiency of the system.
Therefore, this study of productivity improvement is conducted in manufacturing
sector to produce lekor in various type, namely crispy lekor, cheesy crispy lekor and cheesy
lekor ball. Combination between lekor (originally made from fish and flour) and cheese
shows promising sales in market. However, the entrepreneur has to be creative and
innovative in producing special and unique lekor compared to ordinary one. On the other
hand, an automated system should be developed to sustain the quantity and the quality of the
product to meet uprising demand nowadays.
In conclusion, the successful achievement of an organization is based on their
productivity. Tara (2017) stated that by implementing improvement of productivity,
companies bring products to market more quickly, ensure customer satisfaction and maintain
their market share. Improving manufacturing productivity involves collecting and analysing
data and making effective decisions. Ensuring the success of these operational excellence
initiatives often depends on divisions working together to share data and interpret it
appropriately.
3
1.2 Problem Statement
Process utilisation that ensures all workstations are balanced is essential factor for
factory productivity. In short, increasing productivity means that the workers/machine
produce products more quickly or completing services at a more rapid rate than before.
Currently, the shaping operation for producing cheesy lekor ball is done manually by four
workers. Moreover, due to limited number of worker, they cannot produce the cheesy lekor
ball on daily basis because of constraint of time to produce different types of products with
shape and size of crispy lekor. Currently, the factory is able to produce the cheesy lekor ball
once in a week with limited operation time and thus result in low productivity. The company
has planned to expand their business to provide their product to super or hypermarket apart
of the daily market. Table 1 shows the average monthly output from April to October 2017
which is considered low compared to monthly supermarket’s demand. Therefore, a
necessary improvement of working procedure should be considered to increase the
productivity of lekor product in the Zazihan Enterprise to meet the increasing demand.
Table 1.1: An average of monthly output of cheesy lekor ball from April to October 2017
(Zazihan, 2017).
Product
Cheesy Lekor Ball
Month
(2017)
Output (Bulk)
Demand (Bulk)
Apr 42 400 May 40 400 Jun 45 400 Jul 45 400 Aug 40 400 Sep 42 400 Oct 40 400
4
1.3 Objective of Study
Objective of this study are:
i. To identify the current activities in shaping process by using process work study.
ii. To propose a new automated approach by AHP and TOPSIS analysis.
iii. To differentiate the productivity between conventional and propose method.
1.4 Scope of Study
This study will be conducted at Zazihan Enterprise, located at No 34 Jalan Suria 68,
Bandar Seri Alam 81750 Masai Johor and focusing in Production Area at Shaping Process.
Even though there are various products produced by Zazihan Enterprise, this study only
emphasises on the improvement of productivity in producing cheesy lekor ball. Design
consideration of this study is based on company requirement and mutual-agreement between
both parties which are from the researcher and the company.
1.5 Significance of Study
Process utilisation that ensures all workstations are balanced is essential factor for
company productivity. The main current problem which productivity is not achievable might
due to several contributing issues such as unsuitable work method procedure, lack of
machinery and equipment usage. Upon the development of this study, several achievements
might be yield such as targeted productivity of selected area can be achieved successfully by
reducing or eliminating bottleneck process and improve the conventional method to
automated system.
5
1.6 Research Planning
Activity planning of this research is outlined in a Gantt chart as in Appendix A.
1.7 Outline of Thesis
This thesis is presented in four chapters as detailed below:
• Chapter 1 introduces the background of productivity improvement, factors and
impacts of the study.
• Chapter 2 describes the literature review by various researchers in the field of
productivity improvement and automated practice in food manufacturing industry.
• Chapter 3 describes the details of scheme planned in conducting the study.
• Chapter 4 describes the result and discussion based on collected data and several
analyses is made to determine the feasibility of proposed approach compared to
conventional method.
• Chapter 5 concludes the study thoroughly and proposes some recommendations for
future enhancement of the study.
6
CHAPTER 2
LITERATURE REVIEW
This chapter reviews the precious literatures which have been carried out by various
researches that related to the scope of the study. It covers elements that are important in this
project such as productivity, type of waste and productivity that contribute to manufacturing
industry efficiency. Sources of information were obtained from journals, books, case studies,
and reports been collected and compiled together.
2.1 Manufacturing
Manufacturing has been practiced for several thousand years, beginning with the
production of stone, ceramic, and metallic articles. Much of manufacturing remained for
centuries as essentially individual activity, practiced by artisan and their apprentices. The
ingenuity of successive generations of artisan led to the development of many process and
great variety of product, but the scale of production is limited by the available power (Schey,
2012). Manufacturing is an industrial activity that changes the form of raw materials to create
products by adding value. To be profitable, an enterprise establishes and nurtures a
manufacturing system that facilitates the flow of information to coordinate inputs, process
and output. Development of modern manufacturing, for example, is dependent on research
materials that may require a variety of new production processes (Ostwald and Munoz,
2008).
According to Quirk (1999) in manufacturing, there are four basic elements that
represent the manufacturing resources required to produce, namely:
7
i. Labour
ii. Methods
iii. Machines
iv. Materials
These elements are the building blocks of a process and together create an
infrastructure that supports manufacturing both directly and indirectly. On one hand,
understanding these different elements can help to simplify the manufacturing concept. The
elements represent the specific aspects of manufacturing that should be used efficiency in
aspects of less labour, less equipment, less time and material required. This efficiency
increases the value in the product, which helps to meet the goal for competitive
manufacturing. In this study, it focuses on the effectiveness shaping process in order to
improve current productivity.
2.2 Productivity in Manufacturing
Most organizations would like to find the recipe for the ultimate productivity
improvement strategy. Most organizations that are searching for this improvement are likely
unable to take full advantage of the methodologies and techniques they had tried so far. Part
of this is because many of them simply do not understand what productivity really means.
Productivity can be defined as the application of the various resources (inputs) of an
organization, industry or country, in order to achieve certain planned and desired results
(outputs). Productivity measurement entails a comparison of outputs to inputs normally by
calculation of a productivity index (output/input ratio). Productivity improvement thus
becomes the establishment of approaches to improve this productivity index (Baines 1997).
8
According to Stevenson (2007), productivity is an index that measures output (good
and services) relative to the input (labour, materials, energy, and other resources) used to
produce them. It is usually expressed as the ratio of output to input:
Productivity = Output / Input (2.1)
A productivity ratio can be computed for a single operation, a department, an
organisation, or an entire country. In business organisation, productivity ratios are used for
planning workforce requirements, scheduling equipment, financial analysis and another
important task. In the same way, Mukherjee (2006) stated that productivity is defined as the
ratio of output to input within a defined time with due consideration for quality.
Nevertheless, according to Kendrick and Frankel (2017), productivity is outcome of
several interrelated factors, which can broadly be divided into two main categories where
human factors and technological factors. Human factors are a human nature and human
behaviour is the most significant determinants of productivity. Human factors include both
their ability as well as their willingness to work. Meanwhile, technology factors are the
factors that exert significant influence on the level of productivity. There also another factor
that contributes the efficiency of productivity is managerial, natural environment,
sociological, political and economic.
2.3 Productivity Improvement
Productivity improvement in manufacturing is always the key focus to strengthen an
enterprise cost position to stay ahead of competition. In manufacturing sector, improve the
cost position through faster machine speed, reduce man to machine ratio, utilization of
material efficiently, and increase the through output per fix process cycle are the common