Post on 25-Oct-2020
Thanks for choosing our stand. This stand was designed for mounting flat panel televisions weighing up to 60 kg. The height of TV
can be easily adjusted. The integrated wheels provide ease of movement.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a
qualified contractor. Check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper
installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Required Tools: Phillips screw driver.
Assembly Instructions for TV Trolley Stand
Supplied Parts
No. Picture Description Quantity
1
2
3
4
5
6
7
2
2
1
1
2
2
2
1
Long square tube
Short square tube
Pole with shelf add-on holes
Pole without holes
Pole connector
Tube connector
Tube connector cover
Front
Back
No. Picture Description Quantity
10
12
8
9
4
11
4
2
2
13
14
14
8
Pole cover
Wheel & Washer
M6x10 allen head bolt
M6x60 allen head bolt
Square plate connector
& Rubber Pad
M6 socket plate 4
15 Tool kit 1
2M5x6 Grub screw
16 1Shelf
18 4M4x6 countersink bolt
17 2Shelf support
3
8
4
4
No. Picture Description Quantity
21 1
1
4
4
12
4
4
Square plate
TV arm set
M4x12 boltM4x30 bolt
M6x20 boltM6x35 bolt
M8x20 boltM8x35 bolt
M4 washer
M6 washer
22
23
24
25
26
27
28
29
30
M8 washer
M4 spacer
M6/M8 spacer(5mm)
4
1 2
3 4
5 6
9
1
211
3
4
6
8
10
10
15
Use Tool kit(15) Use Tool kit(15)
5 7
13
Use Tool kit(15)
Use Tool kit(15)
12
Important: Short square tube(2) should be on the same side as the screw hole for Part (13).
1
2Front
Back
Hole for Part(13)
5
7 8
9
21
13
27
15
23-25
26-2829,30(if necessary)
Level adjustment
Use Tool kit(15)
Use Tool kit(15)
6
10 11
12 13
15
10.1
10.2
Safety bolt
Adjust TV height Wire management
Use Tool kit(15)
14
14
Fasten grub screwUse Tool kit(15)
16
18
13 17
15Use Tool kit(15)