Post on 10-Mar-2020
R
Aluminium Enclosure Systems Industrial Carrying Cases.|
Catalogue 2012
ISO 9001:2008 Certified Company
ISO 9001
S D
Sivitek Engineering Pvt. Ltd,
a company that strives to make your work easy.
We are a professionally managed company, specializing in Manufacture of Packaging and Handling solutions for
High Value and Hi-Tech electronic equipments.
Our vast experience enables us to identify and meet the demands of Original Equipment Manufacturers (OEM).
We offer a comprehensive range of customized, easy-to-assemble, efficient and light weight packaging solutions
for Test and Measurement Equipments catering to the needs of a wide range of industries encompassing
Power, Defense, Railways, Petroleum and Education.
We take pride in providing prompt service.
Our Quality System
We, at Sivitek adhere to the Quality System as per ISO 9001: 2008.
All our modules are manufactured using high precision tool and dies, have ergonomic design and high rigidity.
Continuous Innovation, Quality knowhow, Adaptability are factors we seek to improve constantly
to fulfill the expectations of our esteemed customers.
R
1
Module : S-11 (IC) Bench TopIN
STR
UM
EN
T C
ASE
S
Application
- Digital Meters
- Dielectric Constant Meters
- Break down testers
- Surge Testers
- Insulation Testers
- Micro Ohm Meters
- Capacitance Meters
- Winding Analyzer
S-11(IC) Bench Top is designed specially for electronic
and electrical industry as a packaging solution for bench top instrument.
Thanks to its modular construction and functional design,
it provides optimum utilization and accommodation
for high value electronic instruments.
S-11(IC) is made from the composition of aluminium extruded profile,
panels and cover plates are of aluminium sheets.
Extruded side channels add strength and aesthetics.
Features
- Robust design with all extruded aluminium composition.
- Front and rear panel insertion from front screw - on.
- Cases available in different sizes in terms of Height,
Width and Depth.
- Supplied with rear panel standard on all modules.
- Top/Bottom cover plates with different colour shades,
removable from out side, vented or unvented.
- Interchangeability of all parts.
- Soft look design, no sharp corners.
- User friendly case, assembles in a minute.
2
R
Module : S-11 (RM) Rack Mounted
INST
RU
ME
NT
CA
SES
S-11(RM),
electronic and electrical industry as a packaging solution for rack mounted instrument.
Extruded side channels add strength and aesthetics.
A versatile design can be equipped as a Rack mounting enclosure.
Rack Mounting is designed specially for
Material
Frame composition made from aluminium extrusions.
Top/bottom cover panels, front/rear panel made from aluminium sheets.
Finish
Choice of powder coating for extruded frames.
Silver coated finish for front/rear panel
Top/bottom cover are normally powder coated.
Supply Includes
- 4 Vertical (Height) Sections
- 4 Front/Rear (Width) Sections
- 1 Rear panel (Front screw on)
- 1 Hardware (Fasteners) Set
- 2 Side (Depth) Panels
- 2 Top/Botton Cover Plate
Customized cases are also provided to suit your application.
3
Available Sizes :
‘U’ (Height) : 1U, 2U, 3U, 4U, 5U & 6U
‘T’ (Width) : 21T, 42T, 63T, 81T & 84T
‘D’ (Depth) : 185, 245, 305, 365 & 425mm
U (HE) : unit of height 1U = 44.45 mm
T (HP) : unit of width 1T = 5.08 mm
Color Codes
Kangaroo Blue Texture DA Grey Texture Red Texture Signal White Texture
Front View S-11(IC) Bench Top Front View S-11 (RM) Rack Mount
Top View
`D'
`d'
Side View
`d'
`D'
`h'
`H'
`h'
`H'
`w'
`W'
`w'
`W'
Dimensions = mm.
S-11(IC) Bench Top S11 (RM) Rack Mount
Width
T `W' `w'Overall Usable
21T 129.7 106.742T 236.4 213.463T 343.0 320.084T 449.7 426.7
Height
U `H' `h'Overall Usable
1U 43.6 24.02U 88.1 68.53U 132.5 112.94U 177.0 157.45U 221.4 201.86U 265.9 246.3
Depth
D `D' `d'Overall Usable
1D 185 1792D 245 2393D 305 2994D 365 3595D 425 419
Width
T `W' `w'Overall Usable
21T 162.5 106.742T 269.2 213.463T 375.8 320.084T 842.5 426.7
Height
U `H' `h'Overall Usable
1U 43.6 24.02U 88.1 68.53U 132.5 112.94U 177.0 157.45U 221.4 201.86U 265.9 246.3
Depth
D `D' `d'Overall Usable
1D 185 1792D 245 2393D 305 2994D 365 3595D 425 419
Dimensions = mm.
4
1)(Bench Top Modules)To be used as an instrument case for bench top modules.
Aluminium extruded.
Powder coated.
Front Section
Material
Finish
2) (Rack Mounting Modules)To be used as a rack mounted enclosure.
Aluminium extruded.
Powder coated.
Front Section
Material :
Finish :
AC
CE
SSO
RIE
S
3)Side mounting screw on with both side bends for fixing the panels from side panels with Front/Side mounting screw.
2.5mm Aluminium
Silver coated
Front Panel/ Rear Panel
Material :
Finish :
4)A set of two can be used on both front section as well rack mount section bended at the two ends
Aluminium extruded.
Powder coated.
Front handle
Material
Finish
5)Feet with tilt back with foldout support stand, enables you to stand the Enclosure either parallel or at an angel for easier access to operate from front.
ABS Plastic.Black.
Feet
Material : Finish :
6)
Can be used as chassis for various component mountings.
1.6mm M.S/ 2.5mm Aluminium .
Powder coated/ silver plated.
Base plate / Chassis
Material
Finish
7) Can be inserted or slide into special grooves provided in the front / depth profile to fix the mounting plates and parts.
2mm M.S.M3-21T, 42T, 63T & 84TSilver plated
Threaded strips
Material : Sizes : Finish : R
5
SU
B R
AC
KS
Module : S-33
Features
- Can be equipped as an instrument case as a Bench Top.
- Weight carrying capacity up to 60 kg.
- Robust design with all extruded aluminium composition.
- Front and rear panel insertion from front.
- Available in different sizes in terms of Height and Depth.
- Width standard on all modules.
- Supplied with both front & rear panel .
- Top/Bottom cover plates as well as side plates with different
colour shades, removable from out side,
- Interchangeability of all parts.
- Soft look design-no sharp corners.
Application
- Oil Test Systems
- Ratio Meters
- Tan Delta Systems
- Transformer Ratio Meters
- Automatic winding test Systems
- Welding Systems and Machines
- C & Tan Delta Bridge Systems
- Automatic Transformer Ratio
Meters
S-33 racks are light weight heavy duty racks specially
designed and manufactured for housing Test and
Measurement instruments, analytical instruments
and for laboratory use.
3 types of interlocking aluminium extrusions are
used in construction of the basic frame.
Generally these are used on table tops to
house equipments and conforms to
19” rackmounting specifications.
The rack is capable of handling up to
60 kilograms of load and supplied with
special die-cast handles to enable lifting.
R
6
Material
Frame composition made from aluminium extrusion.
Top/bottom cover and side panels are made of steel sheets
Front/rear, made from aluminium sheets.
Finish
Choice of powder coating for extruded frames.
Silver coated finish for front/rear panel
Top/bottom cover and side panels are normally powder coated.
Supply Includes :
- 4 Vertical (Height) Sections
- 4 Front/Rear (Width) Sections
- 2 Front/Rear panel (Front screw on)
- 1 Hardware (Fasteners) Set.
- 2 Side (Depth) Panels
- 2 Top/Botton Cover Plate
- 4 Rubber spacers (antiskid)
- 2 Die-cast side handles
`d'
`D'
`d'
`D'
10
466±1.0
485±1.0
`H'
`h'
550
Height
U `H' `h'Overall Usable
3U 168.5 133.354U 213.0 177.86U 301.8 266.78U 390.7 355.69U 435.1 400.0
Depth
`D' `d'Overall Usable
350 272.5450 372.5
Dimensions = mm.
S-33 Sub Racks
Side ViewFront View
Top View
Lemon Yellow Golden Yellow Kangaroo Blue
7
Application
- Product demo kits and Cases.
- Flight Cases.
- Mounting and Carrying Security &
- Electronic Equipments.
- Testing and Measuring
Instruments.
- Product Demonstration as well as
product display cases.
- Defense Equipments.
- Transportation and Storage Cases.
IND
UST
RIA
L C
AR
RY
ING
CA
SES
Features
- Rough And Tough ergonomic design
- Available in different colour shades and sizes in terms of
Height, Width and Depth.
- Total dust protection cases.
- Weight carrying capacity up to 80-90 kg.
- Can be equipped as a Panel Mounted.
S-22(HD), an innovative product
has been designed specially for the industrial
application to carry, assemble in and protect your
high value products.
S-22(HD) is robust and light weight,
constructed from aluminium extrusion profiles.
Heavy duty cases are available
to suit your application.
Module : S-22 (HD) Heavy Duty
R
8
Material
Frame composition made from Aluminium Extrusions
as well as PVC boards / Marine Ply. with Aluminium Lining.
Surface Finish
Stucco finish, powder coated finish.
Frames are normally Anodized finish and Black Powder Coated.
`W'
`w'=W-30mm'
`D'
`d=
D-3
0m
m'
`D'
`d=D-30mm'
`L1'
`L'`SH'
`W'
`h'
`w'=W-30mm'
`H'
`FH'
Stucco Finish
Oxford Blue Texture
Customized cases are also provided to suit your application.
Side ViewFront View
Top View
`W' Overall Width`w' Usable Width`H' Overall Height`h' Usable Height`D' Overall Depth`d' Usable Depth`L1' Lid Upper`L' Lid Lower
`FH' Front Handle`SH' Side Handle
S-22(HD) Industrial Carrying Cases
9
LED CaseMulti-Lid
Module : S-22 (SL) Soft Look & Light Weight
S-22 (SL), an innovative product has been designed specially
for the industrial application to carry, assemble in and protect your high value products.
Light weight, constructed from aluminium extrusion profiles.
Cases are available to suit your application and can be equipped as a bench top module with top panel
soft look case,
Features
- Soft Look ergonomic design.
- Total dust protection cases.
- Available in different colour shades and sizes in terms
of Height, Width and Depth.
- Weight carrying capacity Below 20 kg.
- Can be equipped as a Panel Mount.
IND
UST
RIA
L C
AR
RY
ING
CA
SES
Application
- Product demo kits and Cases.
- Flight cases.
- Mounting and carrying
- Security & electronic equipments.
- Testing and Measuring Instruments.
- Product demonstration as well as
product display cases.
- Defense equipments.
- Transportation and storage cases.
R
10
Customized cases are also provided to suit your application.
Material
Frame composition made from Aluminium Extrusion
as well as PVC boards with Aluminium Lining.
Surface Finish
Stucco finish, Powder coated finish,
frames are normally Anodized finish and Black Powder Coated .
`d=
D-2
0m
m'
Spacer
Lemon Yellow Texture
Golden Yellow Texture
Kangaroo Blue Texture
Signal Red Texture
Black Texture
Color Codes
`w'=W-20mm'
`W'
`h'
`H'
`d=D-20mm'
`D'
`L1'
`L'
`w'=W-20mm'
`W'
`D'
`W' Overall Width`w' Usable Width`H' Overall Height`h' Usable Height`D' Overall Depth`d' Usable Depth`L1' Lid Upper`L' Lid Lower
S-22(SL) Industrial Carrying Cases
`d'
11
AC
CE
SSO
RIE
S
PVC Handles Handle without Plate (M.S.) Handle with Plate (S.S.) Handle with Plate (M.S.)
Butterfly Lock with Plate (Big)
Butterfly Lock with Plate (Small)
Latch Lock (Big) Latch Lock (Small )
Latch Lock (Mini) Hinges (Stay Type, Big) Hinges (Stay Type, Small) Detectable Hinges
Rubber Spacers (anti skid) Telescopic Trolly Wheels
L Corner (S.S.) Ball Corner (S.S.)
Shoulder Strap
R
12
Packaging solution,
a unique application using high impact
resistance cross linked Polyethylene foam.
It is provided with special cutout as per the requirement
for packing your high value product to suit the specific application.
Features
- Impact resistance with excellent elasticity.
- A protective ideal Material for High Valuable Product Packing.
- Avoids Damages to the Product in Transportation.
- Protects the Material against extreme Temperatures.
- Waterproof as well as heat resistance.
- Any Size , shape cutout can be made to suit your application.
Technical Features
- Compression set : 14%
- Density : 60-70kg/M3
- Tensile Strength : 710KN/SQM0- Temperature Extremes: -70 C to 80 C
Finish
Black
0
PAC
KA
GIN
G S
OL
UT
ION
13
ISO 9001
S D
ISO 9001: 2008 Certified Company
SIVITEK ENGINEERING PVT. LTD.
Regd. Office : 10, 'Pasaydaan', Vidyavinay Society, Lawrence Road, Devlali Camp. Nashik - 422401 (India)
Works : K - 31 , M.I.D.C. Ambad, Nashik - 422010 ( India.)
Tel : + 91-253-6698084, 2384950.
Email : info@sivitek.com
www.sivitek.com F/CO
M/1
1 Re
v. 1
The Company reserves the right to amend the products specifications without any prior notice.
R