Post on 11-Jul-2020
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
22TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
29
30
31
333435
6828
64
16
72
65
6667
32
6769
3663
7170
61
5857
56
5560
55 17
62
48
22
24
2125
44
434142 45
23
26
46
20
18
27
4
6
5
7
2
53
51
49
50
52
47
54
3
11
39
1
38
15
12
37
74
1914
10
40
73
8
59
59
13
75
14
15
76
77
78
76
23
REF#PART#
GRAPHITE123456789
10111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
5657585960616263
6465666768697071
928179081592818505139059595577902949282391370906789068890680906795036750422928199282092821928229048190482904839048490485904809081090489913509135150428908429087350422908439087190872920509205190728908039080490821908409106491055910569082290879904589096090961908809084190123908119046350512272299054090824908309082391088904579085090462505129083790962908879082790886908889054027229
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
DESCRIPTION2002 DARK GRAY
(CHARCOAL)FRAMECHANNEL PLUG -BLACK PLASTICFRONT / REAR STABILZERLOCKWASHERLEVELER FOOTLEVELER LOCKNUTSUPPORT PADCOMPUTERBATTERY COVER FOR 92823 ONLYCOMPUTER MOUNTING SCREWSCABLE WIRE TIE STRAPCOMPUTER SUPPORT TUBE-RIGHTCOMPUTER SUPPORT TUBE-LEFTPAN HEAD SCREWKEPS NUT (10 X 32)RIGHT CHAINGUARDLEFT CHAINGUARDRIGHT LEVER ARMLEFT LEVER ARMOILITE BUSHING (23/32” I.D.)LOCK WASHERLOCK NUTPIVOT BOLT 1/2 X 13 THREADFOOT REST GRIPCLEVIS PINCOTTER PINHANDLEBAR GRIPS W/ PLUGSWHEEL CAGE-RIGHTWHEEL CAGE-LEFTSPEED NUTTRANSPORT WHEEL BRACKETHOOK BOLTKEPS NUTTRANSPORT WHEELTRANSPORT WHEEL AXLEPUSH-ON FASTENERSEAT POSTSEAT POST PINFAN LOCKING KNOBSPRINGPEDALS (PAIR)WEDGE PIN ASSEMBLYRIGHT CRANK ARMNYLON WASHER (WHITE)ROLLER BEARING W/ SNAP RINGSNAP RING ONLYCONNECTING ARM ASSEMBLY ( WITH BEARINGS )RIGHT ECCENTRIC W/ 46 TOOTH SPROCKETCHAIN WITH 1/2 LINK ( CRANK TO IDLER HUB )BOTTOM BRACKET W/ LOCK RING L.H. THREADLOCK RING ONLY L.H. THREADLEFT ECCENTRICLEFT CRANK ARMOILITE BUSHING (3/8” I.D.) BAG OF TENIDLER HUB COMPLETEIDLER HUB AXLE SET ONLYSERRATED AXLE WASHERSPROCKET LOCKRING15 TOOTH SPROCKETCIRCULAR CHAINGUARDCHAIN TENSIONER46 TOOTH SPROCKETSPROCKET MOUNTING BOLTCHAIN ( MID-HUB TO FAN WHEEL 92 LINKS )WHEEL ASSEMBLY COMPLETEWHEEL AXLE SET ONLYAXLE WASHERSPEED PICK-UP ( SENSOR )SPEED PICK-UP BRACKETSPOKE PROTECTOR RIGHT SIDESPOKE PROTECTOR MOUNTING CLIPMAGNETSPOKE PROTECTOR LEFT SIDE15 TOOTH SPROCKETSPROCKET LOCK RING
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PART#BRONZE
PART#WHITE
28529
90562
95555
90878908779046790468
28528
90563
92823
90464904659046690469
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
98630
98632
98634986359863198633
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
24
REF#
72737475767778
908339553593079904969045970801331579270793028
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
DESCRIPTION
CIRCULAR CHAINGUARDCOMPUTER WIRESADDLEHANDLEBAR END PLUGSCHAINGUARD HARDWARE SETSTABILIZER HARDWARE SETAXLE NUTSOWNERS MANUALSELL SHEET PACK OF 25
PART#○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
Converting the Airdyne 3 mechanical load indicator(speedometer) to an electronic computer.
The old style mechanically driven load indicator can beconverted to a computer by using the following parts.Note: To maintain proper calibration, you will have toreplace the idler hub cog the fan cog and both chains ifyou use the AD4 computer (part # 92823). This is notnessesary if you use the AD5 (Airdyne Pro) computer(part # 92900).The AD5 computer can be programmedfor all of the Airdyne models.
AD3 AD492823
AD5 (PRO)92900
90887908869083790962908279067990680904579045890540
Spoke Protector with magnetMagnet (not needed if ordering 90887)Speed SensorSpeed Sensor BracketClips to hold Spoke Protector (3 Needed)Computer Support Tube LeftComputer Support Tube RightChain Idler Hub To Fan (needed if using AD4 computer)Chain Crank To Idler Hub with 1/2 Link (needed if using AD4 computer)15 Tooth Sprocket (needed if using AD4 computer)
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
ELECTRONIC TROUBLESHOOTING
1. PROBLEM: The LCD shows no display
SOLUTION: Make sure the batteries are seated properly, installedcorrectly (+/-), and the correct voltage.
Check the battery contacts for oxidation or corrosion.
Check all connections.
Inspect the cable for breaks or bad connections.
If all of the above are ok, replace the computer.
We have seen a number of PC boards damaged by use ofmounting screws other than those supplied with the unit.This is not a manufacturer's defect and does not qualify forwarranty replacement.
a.
b.
c.
d.
e.
NOTE:
2. PROBLEM: The computer will not start
SOLUTION: Replace the batteries.
Make sure the gap between the sensor and thefan wheel magnet is between 2 and 4mm.If the gap is correct, see step c.
If no signal is received by the computer, use a multimeterto check the continuity of the sensor and then the sensorwire. If both the sensor and wire are functioning, replacethe computer
a.
b.
c.
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
25
TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
ELECTRONIC TROUBLESHOOTING (continued)
3. PROBLEM: No RPM reading
SOLUTION: Check all connections.
Without removing the wire, remove the sensor from themounting bracket and pass a hand held magnet over thesurface of the sensor. If a signal is received by the computer, remount the sensor and make sure the gap betweenthe flywheel magnet and the sensor is between 2 and 4mm.
If no signal is received by the computer, use a multimeterto check the continuity of the sensor and then the sensorwire. If both the sensor and wire are functioning, replacethe computer
a.
b.
c.
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
4. PROBLEM: Computer does not read properly
SOLUTION: Check all connections.
Make sure local sea level elevation is entered.Press and hold the upper select button for fifteen secondsthen use up button to increase the elevation to theproper level. Press select to exit.
a.
b.
MECHANICAL TROUBLESHOOTING
1. PROBLEM: If you have vibration
SOLUTION: Reduce belt tension by first looseningthe axle nuts ( A) and then loosening thetensioner nuts (B).
Check the hub for loose races or a rough bearing.
a.
b.
26
27TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
MECHANICAL TROUBLESHOOTING (continued)
2. PROBLEM: If you have squeaking, tapping or rubbing noises
SOLUTION: See if the fan is rubbing the cage.
Check chain tension device.
Lube chain.
Lube pivot points.
Align the belt using the fan tensioner.
Check all bearings for binding or play.
a.
b.
c.
d.
e.
f.
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
3. PROBLEM: Pedals feel loose
SOLUTION: Make sure the pedals are tightly screwedinto the crank arms.
Make sure the crank bolts on both crankarms and eccentrics are tight.
Make sure the square tapered extensionsare tightly bolted to the eccentrics.
Make sure the square openings in both the crank arms andeccentrics have not been rounded out. This problem is causedwhen the bike has been ridden with loose arms.
Make sure the the bottom bracket is tight in the frame andbearings operate smoothly.
a.
b.
c.
d.
e.
4. PROBLEM: Lever arm feels loose
SOLUTION: Check Oilite bushing for excessive wear.
Tighten the pivot bolt to eliminate play.
Check threads on pivot bolt.
Look for cracks on frame at pivot area.
a.
b.
c.
d.
28TECHNICAL SERVICE (800) 864-1270 FAX (877) 686-6466
MECHANICAL TROUBLESHOOTING (continued)
5. PROBLEM: Connecting arm feels sloppy or loose
SOLUTION: Check the bearing for excessive play.
Add another spacer to connectionat the eccentric.
a.
b.
AIRDYNE - 4 ( 1990 - PRESENT )SCHWINN
AIR SYSTEMS
NOTES
FOR MORE DETAILED INFORMATION CONTACT
TECHNICAL SUPPORT AT 1-800-864-1270