Post on 06-Oct-2020
it
TP ZETAAdvanced Line
Automatic punching machine15 stationsFully auto-index
2
TP ZETA Performance and unlimited power
“TOP OF THE RANGE, UNIQUE IN THE MARKET TO NOT FEAR THE HIGH PUNCHING FREQUENCIES
SMART TOOL CHANGE SYSTEM
Equipped with a fully automatic auto-index 15-station tool
changer that can accommodate over 40 tools with the use of
multi-tool.
Maximum accessibility to allow the operator to setup the ma-
chine in short time.
Servo-electric
High performance
Big formats
Energy efficiency
Advanced programming
1
2
3
4
5
3
ELECTRIC AND WITH LOW CONSUMPTION
TP Zeta is equipped with an advanced power-assisted pun-
ching unit without any hydraulic oil and with low energy con-
sumption.
This allows the machine to reach punching frequencies of
900 rpm and a cutting force of 30 tons.
4
VERSATILE
FULLY AUTO-INDEX
“C” FRAME
All TECHNOLOGY punching machines have in common the
open C frame for a maximum machine accessibility.
All tools, single or multi-tool, can be rotated from 0 ° to 360 °
with minimum steps of 0.01 °.
Advantages:
• Easy programming even for complex nesting
• Minor machine set-up costs
• Greater efficiency in material using
0° - 360° single tool rotation
0° - 360° tool rotation
inside in multi-tool
s i n g l e t o o l
m u l t i t o o l
FANUC CNC AND CUSTOMIZED HMI
All our punching machines are equipped with customized and
designed HMI for an easy use thanks to the large touch scre-
en of 15 inches.
The use of CNCs, drives and motors produced by the world
leader FANUC guarantees maximum reliability.
• High stability and precision
• Accessibility on three sides
• Processing out of standard formats
5
CUSTOMIZABLE SET-UP
CUSTOMIZABLE TOOL STATIONS
Each station can accommodate tool or multi-tool without dia-
meter constraints.
• 15 auto-index stations fully customizable
• Tool change in only 3 seconds
• Deformations with heights above the standards
Massima personalizzazione
Utensile
Utensile rotella
1
5
10
Utensili
Utensili
Utensile filettatore
SMART TOOL CHANGE
The fast couling allows to hold punch and die in the station in
just 12 seconds.
MULTI-TOOL 5 OR 10 AUTO-INDEX TOOLS
The Multi-Tool allows to load 5 or 10 tools in one station. This
increases machine capabilities, reduces processing time and
set-up costs.
6
TRUMPF TOOLS
TECHNOLOGY has chosen to equip its machines with TRU-
MPF-style tools to offer the utmost technology in tools and the
widest range of applications, through holders designed in par-
tnership with WILSON TOOL.
Advantages:
• Saves 30/40% compared to turret tools
• More handy thanks to the small size
• Realization of all types of processing
die holder
die punch
punch
die
standard
tool
special
tools
TRUMPF Style tools Holders
TOOLING
IN A MACHINE MORE WORKING STEPS
The large number of functions provided with TECHNOLOGY
punching machines allow special processing without the help
of other machines.
• Punching
• Nibbling
• Drawing
• Forming
• Marking
• Coining
• Bending
• Tapping
• Fine contouring
• High speed forming
• Deburring
7
NO LIMITS
“DIFFERENT FUNCTIONS TO ACCOMPLISH MUL-TIPLE STEPS OF WORK WITH ONE MACHINE
Fine contouring for complex processing and high quality of the workpieces
FINE CONTOURINGForming with single punch or by step
FORMINGDrawing processing
DRAWING
Marking works
MARKINGTapping without the removal of scraps on holes previously made
TAPPINGCNC Functions for high speed forming (Wheel Tools by WILSON TOOL)
HIGH SPEED FORMING
8
SOFTWARE AND TELE-ASSISTANCE
TELE-ASSISTANCE
Possibility to receive assistance from a qualified technician di-
rectly from our offices, by connecting remotely to your machi-
ne or to the programming computer.
CAD/CAM SOFTWARE
• Reduction of diagnostic and intervention times
• Remote Assistance on Programming Software
• Reduction of machine stops
JETCAM Expert programming software allows to leverage all
potential of the TP OMEGA thanks to its automatisms, which
make programming easy, fast and intuitive.
Some advantages::
• View and import DXF and DWG files
• Automatic nesting with metal sheet optimization
• Tools library management
• Automatic processing of the single component with se-
lection of tools
technology
internet
customer
9
SCRAPS EVACUATION BELT
Scraps evacuation belt allows the collection of processing
residues in a suitable and large container, avoiding frequent
breaks for the emptying of the container under machine.
PHOTOCELLS PERIMETER
This system complies with international safety standards
(CEE), it is designed to protect the safety of the operators or
anyone that works near the machine.
TABLE FOR WORKING PIECES UNLOADING
The front table allows the automatic unload of working pieces
SUPPORT TABLES
Support tables in brushes or brushes and balls are suitable for
working up to 3mm.
OPTIONAL
10
AUTOMATION SYSTEM
CHEAPER AND MORE EFFICIENT PRODUCTION
CNC sheet metal loading / unloading systems connected to the
work center, making the production cycle completely automatic,
saving up to 80% in the time of sheet management, minimizing
operator intervention and presence.
ASSISTANCE AT KM 0
Total machine warranty for 24 months.
First 5 years with assistance at Km 0, completely removing
the distances between us and our customers.
Advantages:
• Execution of workings 24h / 24h
• Productive cycles without operator involvement
• Loading sheet sizes with large dimensions
WARRANTYINTEGRAL
24 MONTHS
11
a B
c
ITS FEATURES
Cutting force kN 300 300 300 300
Maximum metal sheet thickness mm 6 6 6 6
Working size without repositioning mm 1250 x 2500 1500 x 2500 1500 x 3000 1500 x 4000
Working size with repositioning mm 1250 x 3000 1500 x 5000 1500 x 6000 1500 x 8000
X axis speed m/min 90 90 90 90
Y axis speed m/min 80 80 80 80
Simultaneous axes speed m/min 120 120 120 120
X axis stroke mm -40 / 2540 -40 / 2540 -40 / 3040 -40 / 4100
Y axis stroke mm -40 / 1340 -40 / 1590 -40 / 1590 -40 / 1590
Maximum metal sheet weight kG 150 150 150 150
Maximum punching frequency stroke/min 900 900 900 900
Positioning Accuracy mm ± 0.08 ± 0.08 ± 0.08 ± 0.08
Auto-index rotating speed rpm 60 60 60 60
Minimum Programmable Positioning ° 0,01 0,01 0,01 0,01
Vertical turret n° tools 15 auto index 15 auto index 15 auto index 15 auto index
Number of tools with multi-tool use n° tools 19 - 150 19 - 150 19 - 150 19 - 150
Tool change time sec 3 3 3 3
Tool change time with multi-tool sec 0,5 0,5 0,5 0,5
Numerical control FANUC FANUC FANUC FANUC
Average absorbed power kW 8 8 8 8
Width (A) mm 5300 5380 6200 10950
Lenght (B) mm 4950 4950 4950 4950
Height (C) mm 2360 2360 2360 2360
Weight kG 12.800 13.800 14.000 15.000
TP 3510 TP 3610 TP 3612 TP 3616
TECHNOLOGY ItalianaVia Villa Ragone, 18/A16039 Sestri Levante - Genova - ItalyTel. +39.0185.457115 - Fax +39.0185.41256www.technologyitaliana.com
TECHNOLOGY IbericaPoligono Alcamar c/la Cuba, 228816 Camarma de Esteruelas - Madrid - Spainwww.technologyitaliana.com
TECHNOLOGY DeutschlandAm Steingarten 563906 Erlenbach am Main - Germanywww.technologyitaliana.com
Seguici su:
www.technologyitaliana.com
ver.
2.0.
06.1
7 - W
ith th
e re
serv
atio
n to
mak
e ch
ange
s