Post on 30-Oct-2021
About YamadaEngineers and Manufacturers of
Air Powered Double Diaphragm Pumps
The Proof’s in the Pump®
Yamada America, Inc.955 East Algonquin RoadArlington Heights, IL 60005
800 990-7867 Toll-Free847 631-9200 Phone 847 631-9273 Fax
E-mail: sales@yamadapump.comWeb: www.yamadapump.com
1®
CONTENTS
Inside a Yamada Pump . . . . . . . . . . . . . . . . . . 2
Yamada Air Valve Technology . . . . . . . . . . . 3
Non-Metallic Components . . . . . . . . . . . . . . . 4
About Diaphragm Pumps. . . . . . . . . . . . . . . . 4
NDP-5 Series Pumps . . . . . . . . . . . . . . . . . . . . . 5
DP-10/15 Series Pumps. . . . . . . . . . . . . . . . . . 6
NDP-15 Series Pumps. . . . . . . . . . . . . . . . . . . . 8
NDP-15 Split Manifold Pumps. . . . . . . . . . . . 9
NDP-20 Series Pumps. . . . . . . . . . . . . . . . . . . 10
NDP-25 Series Pumps. . . . . . . . . . . . . . . . . . . 12
NDP-40 Series Pumps. . . . . . . . . . . . . . . . . . . 14
NDP-50 Series Pumps. . . . . . . . . . . . . . . . . . . 16
NDP-80 Series Pumps. . . . . . . . . . . . . . . . . . . 18
NDP-32 Series Pumps. . . . . . . . . . . . . . . . . . . 20
G15 Global Series Pumps . . . . . . . . . . . . . . . 21
SolidPRO® Pump . . . . . . . . . . . . . . . . . . . . . . . 22
Xtreme Duty Pro XDP® Pumps . . . . . . . . . . 22
F-Series High Purity Pumps . . . . . . . . . . . . . 23
Drum Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FDA Compliant Pumps . . . . . . . . . . . . . . . . . 25
ATEX, CSA, and U.L. Compliant Pumps . . 26
High Pressure 2:1 Pumps . . . . . . . . . . . . . . . 27
Powder Pumps . . . . . . . . . . . . . . . . . . . . . . . . . 27
Filter/Regulators . . . . . . . . . . . . . . . . . . . . . . . 28
YSC–3EX and YSC–3B Controllers . . . . . . . 28
Liquid Level Controller . . . . . . . . . . . . . . . . . 29
DRD-100 Dry-Run Detector . . . . . . . . . . . . . 29
AD Series Pulsation Dampeners. . . . . . . . . 30
Pump Diaphragms . . . . . . . . . . . . . . . . . . . . . 31
Optional Coatings . . . . . . . . . . . . . . . . . . . . . . 31
Additional Options . . . . . . . . . . . . . . . . . . . . . 32
Installation Diagram . . . . . . . . . . . . . . . . . . . . 32
Performance Curves . . . . . . . . . . . . . . . . . . . . 33
The Yamada Corporation has been a leading producer of industrial equipment since 1905, and of fluid handling products for over 65 years. As a leader in pneumatic pumping technology, Yamada is known in many industries worldwide for its innovative products, superior quality, and unmatched reliability. An impressive history of product design and engineered solutions establishes Yamada as forerunner in industrial pump technology.
Yamada’s reputation for manufacturing top quality products, allied with continuing efforts in research and development, have created a strong foundation for market leadership. As an ISO 9001 certified corporation, stringent quality procedures are followed throughout the manufacturing process, including assembly proceedures and product testing.
The Yamada Corporation is headquartered in Tokyo with manufacturing facilities located throughout Japan. Production facilities are located in Arlington Heights, Illinois, USA, servicing the Western Hemisphere; The Netherlands, providing support throughout Europe, Africa, and the Middle East; and Shanghai, covering the emerging Asian market. These offices are support centers for over 400 authorized fully stocking Yamada distributors worldwide.
Yamada America, Inc., a wholly owned subsidiary of the Yamada Corporation, was established in 1986 to provide service and support for the North, Central, and South American markets, through a highly trained network of distributors.
The Yamada America Corporation:• Professional Customer Service• Product Training• Research & Development• Yamada® Genuine Parts and Service for Yamada® Pumps • Application Engineering• Industry Experience and Expertise
Yamada America maintains an impressive inventory of built and tested pumps in their 40,000 square foot state-of-the-art facility, expeditiously providing Yamada® Pumps and Yamada® Genuine Parts to accommodate customer requests.
With over 150 distributors, Yamada America is effectively positioned to service your market needs. Contact Yamada America for the location of your closest local stocking distributor.
Our slogan, The Proof’s in the Pump® underscores our solid reputation for innovation and reliability. This reputation is truly built into every Yamada pump.
For additional information, AutoCAD® drawings, product literature, and promotions, please visit yamadapump.com or contact our Sales Staff toll-free at 800 990-7867.
T A B L E O F C O N T E N T S
The Yamada Corporation
2®
Optimal Stroke Length Extensive research has led to the development of an optimal stroke length that maximizes diaphragm life and performance while minimizing downtime and maintenance costs.
Rugged, Bolted ConstructionAll pumps feature bolted construction, which eliminates leak paths and simplifies assembly with actual torque values. This style is superior to clamp band retainer designes that bend or warp, thus causing misalignment and general assembly issues, possibly leading to more unnecessary repairs. Outside-Accessible Air ValveInspection or maintenance of every Yamada air valve may be performed without removing the pump from service.
Maintenance Indicator Reset button indicates when maintenance is due.
Unified Air Valve Concept Common-size air valve assemblies reduce parts confusion.
Pilot ValveUnique to the Yamada design is an individual modular pilot valve that actuates the air valve. It is depressed slightly by the inner center disk creating a pressure drop at one end of the air valve, allowing shifting to occur. It is maintenance free with no cumbersome snap rings or lubricated dynamic o-rings to replace or repair.
F E A T U R E S & B E N E F I T S
3®
Yamada® Patented Air Valve Technology
Yamada air valve technology is the heart of the air-powered double diaphragm pump and determines reliability. Yamada holds several patents on its field proven valve and enjoys a superior reputation throughout the industry.
Non-StallingA patented non-centering, spring-assisted shifter is incorporated into every NDP Series pump, ensuring a positive shift every time.
The 304 stainless steel C-springs provide exceptional durability and longevity and are tested to last over 300 million cycles!
The spring assist also aides in long dead head applications for reliable startup.
Continued on next page >
air valve fits pump models NDP-20, NDP-25, NDP-32
air valve fits pump models NDP-40, NDP-50, NDP-80, and SolidPRO®
Common- size air valve assemblies reduce parts confusion.
F E A T U R E S & B E N E F I T S
For additional information on Yamada products and services, visit yamadapump.com
Unified Air Valve ConceptYamada offers two common-size air valve assemblies (shown at right) fitting seven series of pumps, further reducing reassembly confusion and parts inventory. Other air-powered double diaphragm pump manufacturers offer multiple air valve designs and revisions in an effort to address ongoing pump reliability problems. Multiple designs and revisions typically create maintenance rebuild issues, parts confusion, and obsolete inventory. Whether your pumps are fuctioning continously or intermittently - at high or low pressure - using dirty or clean air - Yamada offers one field proven design.
Truly Non-Lubricated Air ValveThe patented Yamada air valve on all NDP series pumps never requires lubrication or pre-packing. The advanced design eliminates the need for external lubrication, which can lead to pumpage contamination and maintenance headaches.Yamada is proud to be the originator and still industry leader of non-lubricated air valve technology for air-powered double diaphragm pumps.
Some air-powered double diaphragm pump manufacturers claim to offer a non-lubricated air valve. Dependent upon the competitor’s design, the air valve will probably require lubrication for continous operation or lubricator installation, if moisture is present within the air system. These valves are pre-packed with grease and are not truly non-lubricated.
Component ReplaceableAll Yamada air valves are desinged with maintenance in mind and can be replaced quickly and efficiently without taking the pump out of service, reducing downtime.
Many competitor air valves can’t be repaired and instead require complete replacement of the valve assembly and housing, further increasing the cost of ownership.
Simply remove four bolts and valve cap from the Yamada pump and slide the assembled air valve into the housing unit.
4®
Non-Metallic Components
Yamada Advantages
Non-Metallic ComponentsYamada engineers utilize state-of-the-art solid modeling and finite element analysis techniques, including rib and shell methods of injection molding to design non-metallic parts structure. This patented technique greatly increases the component strength and reduces material usage.
NDP-40, 50, & 80 Series Stainless Steel Pump Base for Non-Metallic PumpsThe tubular 304 Stainless Steel base was designed to simplify rebuilding procedures and to absorb pump shock during operation. This prevents the leaking common in other designs. The pump can sit upright on a workbench for most of the service, making repairs safer and easier. The radially bent tubular steel base is rated to 85,000 PSI giving it exceptional strength vs. welded angle designs.
Model NDP-50Kynar® with non-metalliccenter body.
Advantages and Characteristics1. Handle a wide variety of fluids with high solids
content: No close fitting or rotating parts so liquid with high solids content and/or particle size can be easily pumped.
2. Self Priming: The Yamada pump design (incorporating internal check valves) provides high suction lift even at dry start-up and with heavier fluids.
3. Ability to run dry: No close fitting or sliding parts are at risk—the pump can run dry without damage.
4 . Variable flow rate and discharge pressure: Yamada pumps will run at any setting within their operating range simply by adjusting the air inlet pressure and system conditions. One pump can fit a broad spectrum of applications.
5. Portable/Simple Installation: Yamada pumps transport easily to the application site. Simply connect an air supply, attach fluid connections, and the pump is ready to perform. There are no complex controls to install or operate.
6. Dead Head: The discharge line can be closed with no damage or wear. The pump will simply slow down and stop.
7. Shear sensitive: The gentle nature and minimal parts contact with the liquid make Yamada pumps an excellent choice for shear sensitive fluids.
8. Safe Operation: Powered by compressed air, Yamada pumps are intrinsically safe.
9. Submersible: If external components are compatible, Yamada pumps can be submerged in liquids by simply running the exhaust line above the liquid level.
10. Pumping efficiency remains constant: There are no rotors, gears, or pistons, which wear over time and lead to the gradual decline in performance/flow rate.
For additional information on Yamada products and services, visit yamadapump.com.
F E A T U R E S & B E N E F I T S / A D V A N T A G E S
Features & Benefits – continued from preceding page.
5®
Split ManifoldDimensions:
6.6” W × 5.87”HNet Wt.: 3.0 lbs.
(1.36 kg) Shipping Wt.: 4.5 lbs.
NDP-5 Specifications 3.4 GPM Max. Flow Rate | 1/4 in. port
Port DimensionsIntake & discharge 1/4” Female NPTAir inlet (incl. ball valve): 1/4” Female NPTAir exhaust (internal silencer): 3/8” Female NPT
Maximum Liquid TemperatureFitted with PTFE diaphragmPump Material TemperatureGroundable Acetal 180°F (82°C)Polypropylene (PPG) 180°F (82°C)Aluminum (ADC-12) 212°F (100°C)Kynar® (PVDF) 212°F (100°C)Stainless Steel (316) 212°F (100°C)
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)Discharge Volume Per Cycle0.0078 gallons (29 cc)Maximum Cycles Per Minute: 400
Maximum Dry Suction Lift: 5-feet
Air Motor: Ryton® air motor standard
Model Number NomenclatureAluminum (ADC-12) NDP-5FATGroundable Acetal NDP-5FDTKynar® (PVDF) NDP-5FVTPolypropylene (PPG) NDP-5FPTStainless Steel (316) NDP-5FSTOptional Split Manifold contact Yamada NDP-5FPT-Z
Performance Curve
AutoCAD® drawings are available on CDROM or at yamadapump.com
PolypropyleneDimensions: 6.06” W × 5.79”H
Net Weight: 2.9 lbs. (1.3 kg) Shipping Weight: 4.4 lbs.
shown with optional center port
N D P ‑ 5 S E R I E S
Stainless SteelDimensions:
6.10” W × 5.87”HNet Wt.: 6 lbs.
(2.7 kg) Ship Wt.: 7.5 lbs.
AluminumDimensions:
6.10” W × 5.87”HNet Wt.: 3.5 lbs.
(1.6 kg) Ship Wt.: 5 lbs.
Kynar® (PVDF)Dimensions:
6.06” W × 5.79”HNet Wt.: 3.7 lbs. (1.7 kg) Shipping Wt.: 5.2 lbs.
Groundable AcetalDimensions:
6.06” W × 5.79”HNet Wt.: 3.1 lbs. (1.4 kg) Shipping Wt.: 4.6 lbs.
DP-10/DP-15 Series
6®
DP-10: 6.0 GPM Max. Flow Rate, 3/8 inch portDP-15: 7.4 GPM Max. Flow Rate, 1/2 inch port
AutoCAD® drawings are available on CD ROM or at yamadapump.com
DP -10 AluminumDimensions: 7.32” W × 9.49”H
Net Weight: 7.7 lbs. (3.5 kg) Shipping Weight: 9.7 lbs.
DP-10 Polypropylene
Dimensions: 7.68” W × 7.72”H
Net Weight: 6.6 lbs. (3.0 kg) Shipping Weight: 8.6 lbs.
DP-15 Polypropylene with
Aluminum Air MotorDimensions:
9.69” W × 11.69” HNet Weight: 7.7 lbs. (3.5 kg)
Shipping Weight: 9.7 lbs.
D P ‑ 1 0 / D P ‑ 1 5 S E R I E S
DP-10 Stainless Steel
Dimensions: 7.13” W × 9.37”H
Net Weight: 11.5 lbs. (5.2 kg) Shipping Weight: 13.5 lbs.
7®
[Ltr./min.]
[Gal./min.]
[Ltr./min.]
[Gal./min.]
DP-1x x x xSeries: DP-10 pump or DP-15 pump
Valve Type:B = BallF = Flat*
Model Number Nomenclature
DP-10 Series Performance Curve (All)
DP-15 Series Performance Curve (Polypropylene)
D P ‑ 1 0 / D P ‑ 1 5 S E R I E S
* Flat valves available for DP-15 pumps only. NOTE: Additional options listed on page 32.
DP-10 Port Dimensions
Intake & discharge connection:Polypropylene (PPG) 3/8” Female NPTAluminum (ADC-12) 3/8” Female NPTStainless Steel (316) 3/8” Female NPT
DP-15 Port Dimensions
Intake & discharge connection:Polypropylene (PPG) 1/2” Female NPTAluminum (ADC-12) 1/2” Female NPT
Air Inlet /ExhaustAir inlet (incl. ball valve): 1/4” Female NPTAir exhaust (incl. silencer): 3/8” Female NPT
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleDP-10: 0.020 gallons (76 cc) DP-15: 0.025 gallons (93 cc)
Maximum Cycles Per MinuteAll diaphragms: 300
Maximum Size Solid1/32” (1 mm)
Maximum Dry Suction LiftAll diaphragms: 10-feet
Air MotorAluminum air motor standardOptional coating: PTFE grey coated (XP)
Optional Split Manifold–contact Yamada
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings.
Yamada® DP-10/15 Series Specifications
Body Material:P = PolypropyleneA = AluminumS = Stainless Steel
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
NDP-15 Series
13.5 GPM Maximum Flow Rate1/2 inch Port Size
8®
AutoCAD® drawings are available on CD ROM or at yamadapump.com
Kynar® (PVDF)Dimensions: 8.66” W × 11.67”H
Net Weight: 9.46 lbs. (4.3 kg) Shipping Weight: 11.46 lbs.
PolypropyleneDimensions:
8.66”W × 11.67”HNet Weight: 7.7 lbs. (3.5 kg)
Shipping Weight: 9.7 lbs.
N D P ‑ 1 5 S E R I E S
AluminumDimensions:
8.66” W × 10.67” HNet Weight: 9.04 lbs. (4.1 kg)Shipping Weight: 11.04 lbs.
Stainless SteelDimensions:
8.31” W × 9.72”HNet Weight: 13.9 lbs. (6.3 kg)
Shipping Weight: 15.9 lbs.
Polypropylene Split Manifold
Model NDP-15BPT-ZDimensions:
9.98”W × 11.69”HNet Weight: 7.7 lbs. (3.5 kg)
Shipping Weight: 9.7 lbs.
9®
Yamada® NDP-15 Series SpecificationsAll Diaphragm Materials(both ball and flat check valves)
N D P ‑ 1 5 S E R I E S
Model Number Nomenclature
NDP-15 x x xSeries: NDP-15 Pump
Valve Type:B = BallF = Flat*
Body Material:P = PolypropyleneV = Kynar® (PVDF)A = AluminumS = Stainless Steel
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
* Flat valves are available for plastic pumps only. NOTE: Additional options listed on page 32.
Port Dimensions
Intake & discharge connection:Polypropylene (PPG) n 1/2” Female NPTKynar® (PVDF) u 1/2” Female NPTAluminum (ADC-12) s 1/2” Female NPTStainless Steel (316) s 1/2” Female NPTAir inlet (includes ball valve): 1/4” Female NPTAir exhaust (internal silencer): 3/8” Female NPTn Polypropylene pumps may be fitted with ball or flat check valves. Ball-type check valves are recommended for flooded suction applications. Flat-type check valves are recommended for suction lift applications.u Kynar® pumps are fitted with flat check valves only. s Aluminum and Stainless Steel pumps are fitted with ball
check valves only.
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per Cycle0.0338 gallons (128 cc)
Maximum Cycles Per MinuteAll diaphragms: 400
Maximum Size Solid: 1/32” (1 mm)
Maximum Dry Suction LiftFlat-type check valve: 8-feet Ball-type check valve: 5-feet
Pump Air Motor: Ryton® air motor standard
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings.
Split Manifold Pumps By utilizing one pump, Yamada offers a design in which the inlet and outlet ports can be configured to multiple combinations; ideal for pumping or combining two similar specific gravity fluids. Construction: Polypropylene, Aluminum, or Stainless Steel
Diaphragm: Choice of six elastomers
Modes of operation: Dual suction with dual or single discharge; single suction with dual discharge
For details, contact Yamada.
NDP-20 Series
31.7 GPM Maximum Flow Rate3/4 inch Port Size
10®
Metal Pump–NPT with Aluminum Air Motor
Aluminum Dimensions: 9.80” W × 12.5”H Net Weight: 19.8 lbs. (9.0 kg)
Shipping Weight: 23.8 lbs.
Stainless Steel Dimensions: 9.65” W × 12.42”HNet Weight: 30.9 lbs. (14.0 kg)
Shipping Weight: 34.9 lbs.
Polypropylene–NPTDimensions:
12.48” W × 14.48”HNet Weight: 15.4 lbs. (7.0 kg)
Shipping Weight: 19.4 lbs.
Metal Pump–NPT with Polypropylene Air Motor
Aluminum Dimensions: 9.8” W × 12.48”H
Net Weight: 16.5 lbs. (7.5 kg)Shipping Weight: 20.5 lbs.
Stainless Steel Dimensions: 9.72” W × 12.4”H
Net Weight: 27.6 lbs. (12.5 kg)Shipping Weight: 31.6 lbs.
Polypropylene ANSI Flange
Dimensions: 12.44” W × 14.72”H
Net Wt: 15.4 lbs. (7.0 kg)Shipping Wt: 19.4 lbs.
Optional: 1” NPT intake and discharge side ports; aluminum pumps only.
N D P ‑ 2 0 S E R I E S
AutoCAD® drawings are available on CD ROM or at yamadapump.com
11®
[Ltr./min.]
[Gal./min.]
[Ltr./min.]
[Gal./min.]
Port Dimensions
Intake & discharge connection:Polypropylene (PPG) 3/4” Female NPTAluminum (ADC-12) 3/4” Female NPTStainless Steel (316) 3/4” Female NPTAir inlet (incl. ball valve): 3/8” Female NPTAir exhaust (incl. silencer): 3/4” Female NPTANSI Flange also available — consult Yamada.
Maximum Liquid Temperature*Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)
* The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleRubber diaphragm: 0.163 gallons (615 cc)PTFE diaphragm: 0.143 gallons (539 cc)
Maximum Cycles Per MinuteRubber diaphragm: 195 PTFE diaphragm: 195
Maximum Size Solid1/16” (2.0 mm)
Maximum Dry Suction LiftRubber fitted pump capability: 18-feet
Air MotorAluminum air motor standard on metal pumps.Polypropylene air motor standard on plastic pumps.
Air Motor OptionsAluminum air motor on plastic pumps. Polypropylene air motor on metal pumps.PTFE grey coating (XP) on aluminum air motors.
Optional Split Manifold–contact Yamada
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings.
Yamada® NDP-20 Series SpecificationsRubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
N D P ‑ 2 0 S E R I E S
Series: NDP-20 Pump
Valve Type:B = Ball
Body Material:P = PolypropyleneA = AluminumS = Stainless Steel
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number Nomenclature
Port OptionNPT or FLG
NDP-20 B x x - xx - x
Plastic Pump Air Motor:PP = Polypropylene
Additional options listed on page 32.
12®
AutoCAD® drawings are available on CD ROM or at yamadapump.com
Polypropylene–ANSI FlangeDimensions: 14.43” W × 17.83 “H
Net Weight: 20.9 lbs. (9.5 kg)Shipping Weight: 25.9 lbs.
Polypropylene–NPTDimensions:
14.47” W × 16.90”HNet Weight: 20.9 lbs. (9.5 kg)
Shipping Weight: 25.9 lbs.
Kynar® (PVDF)– ANSI Flange
Dimensions: 14.43” W × 17.30”H
Net Weight: 26.4 lbs. (12.0 kg)Shipping Weight: 31.4 lbs.
Kynar® (PVDF)–NPTDimensions:
14.41” W × 16.91”HNet Weight: 26.4 lbs. (12.0 kg)
Shipping Weight: 31.4 lbs.
Metal Pump–NPT with Aluminum Air Motor
Aluminum Dimensions: 11.30” W × 14.93”H
Net Weight: 28.7 lbs. (13 kg)Shipping Weight: 33.7 lbs.
Stainless Steel Dimensions: 11.06” W × 14.77”H
Net Weight: 44.1 lbs. (20 kg)Shipping Weight: 49.1 lbs.
Cast Iron Dimensions: 11.27” W × 14.74”H
Net Weight: 44.1 lbs. (20 kg)Shipping Weight: 49.1 lbs.
N D P ‑ 2 5 S E R I E S
Metal Pump–NPT with Polypropylene Air Motor
Aluminum Dimensions: 11.30” W × 14.93”H
Net Weight: 24.3 lbs. (11.0 kg)Shipping Weight: 29.3 lbs.
Stainless Steel Dimensions: 11.13” W × 14.77”H
Net Weight: 39.7 lbs. (18.0 kg)Shipping Weight: 44.7 lbs.
NDP-25 Series
46.2 GPM Maximum Flow Rate1 inch Port Size
13®
Port Dimensions
Intake & discharge connection: Polypropylene (PPG) 1” Female NPTKynar® (PVDF) 1” Female NPTAluminum (ADC-12) 1” Female NPTStainless Steel (316) 1” Female NPTCast Iron 1” Female NPTAir inlet (incl. ball valve): 3/8” Female NPTAir exhaust (incl. silencer): 3/4” Female NPTANSI Flange also available — consult Yamada.
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleRubber diaphragm: 0.22 gallons (833 cc)PTFE diaphragm: 0.21 gallons (787 cc)
Maximum Cycles Per MinuteRubber diaphragm: 210 PTFE diaphragm: 210
Maximum Size Solid 3/16” (4.8 mm)
Maximum Dry Suction LiftRubber fitted pump capability: 18-feet
Air MotorAluminum air motor standard on metal pumps.Polypropylene air motor standard on plastic pumps.
Air Motor OptionsAluminum air motor on plastic pumps. Polypropylene air motor on metal pumps.PTFE grey coating (XP) on aluminum air motors.
Optional Split Manifold–contact YamadaNotes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings. Kynar® (PVDF) pumps fitted with Hytrel® include PTFE wetted o-rings.
Yamada® NDP-25 Series SpecificationsRubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
N D P ‑ 2 5 S E R I E S
Series: NDP-25 Pump
Valve Type:B = Ball
Body Material:P = PolypropyleneA = AluminumS = Stainless SteelF = Cast IronV = Kynar®
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number Nomenclature
Port OptionNPT or FLG
NDP-25 B x x - xx - x
Note: For NPT fitted SS, add “NPT” at end of model number nomenclature. Additional options listed on page 32.
Plastic Pump Air Motor:PP = Polypropylene
14®
ANSI #150 Flange available on Stainless
Steel pumps.
AutoCAD® drawings are available on CD ROM or at yamadapump.com
Kynar® (PVDF)Dimensions: 15.67” W × 29.49”H
Net Weight: 70.5 lbs. (32 kg)Shipping Weight: 80.5 lbs.
Aluminum Dimensions:
16.20” W × 27.96”HNet Weight: 63.9 lbs. (29 kg)
Shipping Weight: 73.9 lbs.Tapped w/1-1/2” NPT
ANSI flange
PolypropyleneDimensions:
15.83” W × 29.60”HNet Weight: 59.5 lbs. (27 kg)
Shipping Weight: 69.5 lbs.
N D P - 4 0 S E R I E S
Stainless SteelDimensions:
16.20” W × 27.66”HNet Weight: 88.2 lbs. (40 kg)
Shipping Weight: 98.2 lbs.
Cast Iron-NPTDimensions:
16.20” W × 27.72”HNet Weight: 103.6 lbs. (47 kg)
Shipping Weight: 113.6 lbs.
NDP-40 Series
107 GPM Maximum Flow Rate1-1/2 inch Port Size
25 7550 1000
0 50 100 150 200 250 300 3500
10
20
30
40
50
60
70
80
0
50
100
150
200
250
300[Feet] [Meters]
[Ltr/min.][Gal/min.]
DIS
CH
AR
GE
HE
AD
WATER DISCHARGE
NDP-40 RUBBER
Data based on 1-ft. flooded suction ambient water.
30 PSI
45 PSI
60 PSI70 PSI
85 PSI
100 PSI50 SCFM
20 SCFM
90 SCFM
25 7550 1000
0 50 100 150 200 250 300 3500
10
20
30
40
50
60
70
80
0
50
100
150
200
250
300[Feet] [Meters]
[Ltr/min.][Gal/min.]
DIS
CH
AR
GE
HE
AD
WATER DISCHARGE
NDP-40 PTFE
Data based on 1-ft. flooded suction ambient water.
30 PSI
45 PSI
60 PSI
70 PSI
85 PSI
100 PSI
20 SCFM
40 SCFM
60 SCFM
15®
Port Dimensions
Intake & discharge connection: Polypropylene (PPG) 1-1/2” ANSI B16.5 #150Kynar® (PVDF) 1-1/2” ANSI B16.5 #150Aluminum (ADC-12) 1-1/2” ANSI B16.5 #150 (with tapped 1-1/2” Female NPT)Stainless Steel (316) 1-1/2” ANSI B16.5 #150 or 1-1/2” Female NPTCast Iron 1-1/2” Female NPTAir inlet (incl. ball valve): 1/2” Female NPTAir exhaust (incl. silencer): 1” Female NPT
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleRubber diaphragm: 0.73 gallons (2.74 liters)PTFE diaphragm: 0.37 gallons (1.40 liters)
Maximum Cycles Per MinuteRubber diaphragm: 148 PTFE diaphragm: 270
Maximum Size Solid9/32” (7 mm)
Maximum Dry Suction LiftRubber fitted pump capability: 18-feet
Air MotorAluminum air motor standardOptional coating: PTFE grey coated (XP)
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings. Kynar® (PVDF) pumps include PTFE check balls and o-rings.
Yamada® NDP-40 Series SpecificationsRubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
N D P - 4 0 S E R I E S
Series: NDP-40 Pump
Valve Type:B = Ball
Body Material:P = PolypropyleneA = AluminumS = Stainless SteelF = Cast IronV = Kynar®
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number Nomenclature
SS Port OptionNPT or FLG
NDP-40 B x x - x
Note: For NPT fitted SS, add “NPT” at end of model number nomenclature. Additional options listed on page 32.
16®
AutoCAD® drawings are available on CD ROM or at yamadapump.com
Polypropylene-PP Dimensions:
18.30” W × 32.30”HNet Weight: 81.6 lbs. (37 kg) Shipping Weight: 96.6 lbs.
AluminumDimensions:
17.78” W × 30.70”HNet Weight: 81.6 lbs. (37 kg)
Shipping Weight: 96.6 lbs.Tapped with 2” NPT
ANSI flange
Cast Iron or Stainless Steel (NPT) Dimensions:
17.72” W × 30.56”HNet Weight:
Cast Iron –143 lbs. (65 kg) Stainless Steel – 132 lbs. (60 kg)
Shipping Weight: Cast Iron –158 lbs.
Stainless Steel –147 lbs.
Optional ANSI #150 Flange for Stainless Steel models.
N D P ‑ 5 0 S E R I E S
NDP-50 Series
164 GPM Maximum Flow Rate2 inch Port Size
v Protectors provide additional support and cushion to the manifolds and out chambers.
Kynar®-PP (PVDF)Dimensions:
18.18” W × 32.24”HNet Weight: 94.8 lbs. (43 kg)Shipping Weight: 109.8 lbs.
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
17®
Port Dimensions
Intake & discharge connection:Polypropylene (PPG) 2” ANSI B16.5 #150Kynar® (PVDF) 2” ANSI B16.5 #150Aluminum (ADC-12) 2” ANSI B16.5 #150 (with tapped 2” Female NPT)Stainless Steel (316) 2” ANSI B16.5 #150 or 2” Female NPTCast Iron 2” Female NPTAir inlet (incl. ball valve): 3/4” Female NPTAir exhaust (incl. silencer): 1” Female NPT
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)* The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleRubber diaphragm: 1.12 gallons (4.25 liters)PTFE diaphragm: 0.69 gallons (2.61 liters)
Maximum Cycles Per MinuteRubber diaphragm: 146 PTFE diaphragm: 220
Maximum Size Solid 5/16” (8 mm)
Maximum Dry Suction LiftRubber fitted pump capability: 19-feet
Air MotorAluminum air motor standard on metal pumps. Polypropylene air motor standard on pastic pumps.
Air Motor OptionsAluminum air motor on plastic pumps.PTFE grey coating (XP) on aluminum air motors.
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings. Kynar® (PVDF) pumps fitted with Santoprene® or Hytrel® include PTFE check balls and o-rings.
Yamada® NDP-50 Series SpecificationsRubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
N D P ‑ 5 0 S E R I E S
Series: NDP-50 Pump
Valve Type:B = Ball
Body Material:P = PolypropyleneA = AluminumS = Stainless SteelF = Cast IronV = Kynar®
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number Nomenclature
Port OptionNPT or FLG
NDP-50 B x x - xx - x
Plastic Pump Air Motor:PP=Polypropylene
Note: For NPT fitted SS, add “NPT” at end of model number nomenclature. Additional options listed on page 32.
AutoCAD® drawings are available on CD ROM or at yamadapump.com
18®
Stainless SteelDimensions: 20.51” W × 38.73”H
Net Weight: 225 lbs. (102 kg)Shipping Weight: 245 lbs.
Cast Iron–NPTDimensions:
20.51” W × 38.73”HNet Weight: 247 lbs. (112 kg)
Shipping Weight: 267 lbs.
Stainless Steel –NPTDimensions:
20.51” W × 38.73”HNet Weight: 225 lbs. (102 kg)
Shipping Weight: 245 lbs.
PolypropyleneDimensions:
22.83” W × 41.10”HNet Weight: 141 lbs. (64 kg)
Shipping Weight: 161 lbs.
AluminumDimensions:
20.57” W × 39.30”HNet Weight: 143 lbs. (65 kg)
Shipping Weight: 163 lbs.Tapped with 3” NPT
ANSI flange
N D P ‑ 8 0 S E R I E S
NDP-80 Series
215 GPM Maximum Flow Rate3 inch Port Size
19®
SS Port OptionNPT or FLG
NDP-80 B x x - xSeries: NDP-80 Pump
Valve Type:B = Ball
Body Material:P = PolypropyleneA = AluminumS = Stainless SteelF = Cast Iron
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number Nomenclature
Port Dimensions
Intake & discharge connection: Polypropylene (PPG) 3” ANSI B16.5 #150Aluminum (ADC-12) 3” ANSI B16.5 #150 (with tapped 3” Female NPT)Stainless Steel (316) 3” ANSI B16.5 #150 or 3” Female NPTCast Iron 3” Female NPTAir inlet (incl. ball valve): 3/4” Female NPTAir exhaust (incl. silencer): 1” Female NPT
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N 180°F (82°C)Neoprene 180°F (82°C)Santoprene® (TPO) 180°F (82°C)EPDM 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
Air Supply Pressure (All Models)20–100 PSI (1.4–7 kgf/cm²)
Discharge Volume Per CycleRubber diaphragm: 2.26 gallons (8.57 liters)PTFE diaphragm: 1.0 gallons (3.8 liters)
Maximum Cycles Per MinuteRubber diaphragm: 95 PTFE diaphragm: 160
Maximum Size Solid13/32” (10 mm)
Maximum Dry Suction LiftRubber fitted pump capability: 19-feet
Air MotorAluminum air motor standardOptional coating: PTFE grey coated (XP)
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-rings.
AutoCAD® drawings are available on CDROM or at yamadapump.com.
Additional options listed on page 32.
Yamada® NDP-80 Series SpecificationsRubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
N D P ‑ 8 0 S E R I E S
20®
Yamada addresses re-piping issues with the Yamada® NDP-32 series pump. Designed to facilitate pump replacement for existing non-Yamada pump installations, the NDP-32 utilizes a 1-1/2” NPT intake port with a 1-1/4” NPT discharge port to ensure compatibility with competitor designs.
Port Dimensions
Intake connection: 1-1/2” Female NPTDischarge connection: 1-1/4” Female NPTAir inlet (incl. ball valve): 3/8” Female NPTAir exhaust (incl. silencer): 3/4” Female NPT
N D P ‑ 3 2 S E R I E S
Yamada® NDP-32 Series
Rubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
Notes: Hytrel® fitted pumps include Buna N wetted o-rings. Santoprene® fitted pumps include EPDM wetted o-ringsAdditional options listed on page 32.
Series: NDP-32 Pump
Valve Type:B = Ball
Body Material:A = Aluminum
Diaphragm Material:C = Neoprene (CR)N = Buna N (NBR)E = Nordel™ (EPDM)S = Santoprene® (TPO)T = PTFEV = Viton® (FKM)H = Hytrel® (TPEE)
Model Number NomenclatureNDP-32 B A x
50.2 GPM Maximum Flow Rate1-1/2” intake port/1-1/4” discharge port
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N | Neoprene | Santoprene® (TPO) 180°F (82°C)EPDM | PTFE 212°F (100°C)Hytrel® (TPEE) | Viton® fluoroelastomer 248°F (120°C)*The maximum liquid temperature for metal pumps is determined by the elastomer (diaphragm material).
Air Supply Pressure Range 20–100 PSI (1.4 –7 kgf/cm²)
Discharge Volume Per Cycle Rubber diaphragm: 0.18 gallons (681 cc) PTFE diaphragm: 0.15 gallons (567 cc)
Maximum Cycles Per Minute: Rubber diaphragm: 279 PTFE diaphragm: 291
Maximum Size Solid: 1/8” (3 mm)
Maximum Dry Suction Lift: 18 feet
Air Motor: Aluminum air motor standard
21®
G15 Global Series
G 1 5 G L O B A L S E R I E S
The G15 series metal pumps are perfect for spraying and dispensing applications, particularly when on and off cycling reliability is critical. Utilizing our new Step Stool (S-Spool), the G 15 uses up to 30% less air than the competition. Maintenance friendly with fewer parts.
Port Dimensions
Intake & discharge connection: 1/2” Female NPTAir inlet (incl. ball valve): 1/4” Female NPTAir exhaust (incl. silencer): 3/8” Female NPT
Rubber Diaphragm Performance Curve
PTFE Diaphragm Performance Curve
To calculate performance for Santoprene® and Hytrel® fitted pumps, use Rubber Diaphragm Curve.
Maximum Liquid Temperature*
Diaphragm Material TemperatureBuna N | Santoprene® (TPO) 180°F (82°C)PTFE 212°F (100°C)*The maximum liquid temperature for metal pumps is determined by the elastomer (diaphragm material).
Air Supply Pressure Range 20–100 PSI (1.4 –7 kgf/cm²)
Discharge Volume Per Cycle Rubber diaphragm: 0.045 gallons (170 cc) PTFE diaphragm: 0.042 gallons (158 cc)
Maximum Cycles Per Minute Rubber diaphragm: 350 PTFE diaphragm: 364
Maximum Size Solid: 1/32” (1 mm)
Maximum Dry Suction Lift: 18 feet
Air Motor: Aluminum air motor standard
Notes: Santoprene® fitted pumps include EPDM wetted o-rings.
Series: G15 Pump
Valve Type:B = Ball
Body Material:A = Aluminum
Diaphragm Material:N = Buna N (NBR)S = Santoprene® (TPO)T = PTFE
Model Number NomenclatureG15 B A x
15.8 GPM Maximum Flow Rate1/2” port size
22®
Yamada® SolidPRO® streams liquids with solids content up to 2 inches diameter
Yamada® XDP-40® aluminum (left) and polypropylene
v Four bolts release end plates for easy in-line cleaning.
v Flap-type check valve.
Yamada® SolidPRO® Designed to Pump Fluids Containing SolidsThe Yamada® SolidPRO® pump is designed to pump fluids containing solids up to 2 inches (50mm) in diameter. Built on the foundation of the NDP Series line of pumps, the SolidPRO incorporates the Yamada patented stall-free/lube-free air valve and rugged, easy-to-service bolted construction.
Designed for durability in the field, the SolidPRO pump’s innovative flap-type check valve technology provides streaming passage of solids while minimizing clogging and downtime. Four external bolts release valve covers on either side permitting service and maintenance without removing the pump from service.
Design SpecificationsNominal Diameter: 2 inch (50 mm)
Flow Rate: 158.5 GPM
Fluid Connections: NPT 2” or ANSI flange 150# 2”
Air Connection: NPT 3/4” / NPT 1”
Normal Air Supply Pressure: 30 -100 PSI (0.2 -0.7 MPa)
Maximum Discharge Pressure: 100 PSI (0.7 MPa)
Discharge Volume per Cycle: 1.056 GPM (4.0 L/min)
Slurry Limitation: maximum 2” solids
Weight: 115 lbs (52 kg)
Xtreme Duty Pro XDP® SeriesFor Xtremely Demanding Process ApplicationsThe Yamada® Xtreme Duty Pro XDP® pump is designed for use in process type applications including filter press, high pressure, extended deadheading, long runs of discharge pipe, and where air consumption is critical.
Available in 1-1/2”, 2” and 3” port sizes, these pumps are built on the liquid platform of a standard NDP Series pump, but with a mechanically-actuated air motor.
Air power is conserved by actuating the air valve using a mechanical linkage instead of relying on air pressure. This reduces the air volume used, providing better pump efficiency.
Yamada® Xtreme Duty Pro XDP® pumps are capable of running on air pressure equivalents as high as 125 PSI or as low as 5 PSI and provide the same liquid side performance as the NDP series pumps.
S O L I D P R O ® P U M P | X T R E M E D U T Y P R O P U M P S
23®
Yamada® F-Series Clean Room Ultra-High PurityExtensively field proven, Yamada® F-Series clean room manufactured pumps are specifically designed for the safe and efficient transfer of ultra high-purity process chemistries. They provide maximum corrosion resistance, ultra high-purity levels and low particle generation. Pumps include 100% machined virgin PTFE diaphragms, liquid chambers and manifolds. Flow rate 1 to 35 GPM
Air control internal shuttle valve or external timer-based control
Air pressure range 20 to 100 PSI
Temperatures up to 212°F (100°C)
Other High Purity pump options available. For additional information, please contact us toll free at (800) 990-7867 or visit www.yamadapump.com.
Features & Benefits Available• Non-Lubricated Air Valve• Wetted Parts are 100% virgin PTFE• Extended Performance Diaphragms• Clean Room Manufactured• Most Complete Line Available• End-User Maintenance• Explosion-Proof Operation• Internal Silencer• Self Priming• Field-proven Design• No Internal Metal Components• Available in Ball or Flat Check Valves
F ‑ S E R I E S H I G H P U R I T Y P U M P S
F-Series Pumps Ultra-High Purity
v Yamada has the largest installed base of high-purity pumps in
the world!
Fluid Connections
DP-5F 1/4” NPT or 3/8” Flaretek®
DP-10F 3/8” NPT, 1/2” Flaretek® or 1/2” ANSI flange
DP-20F 3/4” Flaretek®, ANSI flange or NPT
DP-25F 1” Flaretek® or ANSI flange
DP-38F 1” Flaretek® or ANSI flange
QUALITY. PERFORMANCE.
RELIABILITY.
24®
Yamada® Drum Pumps
Yamada APDD Pumps have distinct design advantages, making them versatile and cost effective drum pumps.
Models are available in Polypropylene, PVDF (Kynar®), Aluminum, and Stainless Steel, which includes a 2” bung adapter and 33” suction tube.
Drum pumps are available in 3/8”, 1/2”, and 3/4” port sizes (3/8” metal only) with flow rates up to 28 GPM.
Note: NDP-15 and NDP-20 plastic pumps utilize side ports with a 90° elbow atop the drum. Due to their weight, aluminum and stainless steel pumps utilize center ports to help maintain pump balance.
Refer to DP-10, G15, NDP-15 & NDP-20 technical information for additional performance data. When ordering, use applicable NDP nomenclature, adding a “D” at the end of the model number. Other sizes and materials are available, consult Yamada.
D R U M P U M P S
Metal Drum Pump with Center PortPort Sizes 3/8”, 1/2” or 3/4”
FDA-Compliant Drum Pumps
Please consult the factory for details.
Plastic Drum Pump with Side Port
Port Sizes 1/2” or 3/4”Kynar pumps 1/2” only
Port DimensionsIntake & discharge connections:Aluminum (ADC-12): 3/8”, 1/2” or 3/4” Female NPT Includes Aluminum Male NPT Bung Adapter Suction Pipe
Stainless Steel: 3/8” or 3/4” Female NPT Includes Stainless Steel Male NPT Bung Adapter Suction Pipe
Polypropylene: 3/4” Female NPT Includes PVC Suction Pipe Bung Adapter (PPG also available) Elbow
Kynar® (PVDF): 1/2” Female NPT Includes PVDF Suction Pipe Bung Adapter Elbow
Drum Inlet Connection: 2” Bung
G15 Global Series Drum Pump Port Size 1/2”
v Yamada FDA Pumps are capable of handling thick liquids.
25®
FDA Compliant Pumps Yamada® FDA compliant pumps are specifically designed for Food, Pharmaceutical & Cosmetic industries where 3A or USDA standards are not required.
Pumps include 316 Stainless Steel wetted components with passivated satin finish, PTFE-coated air motor, sanitary clamp fittings, and FDA compliant elastomers.
Key features of Yamada® FDA series pumps: • self-priming, lube-free air valve• intrinsically safe and portable• no mechanical seals• ability to run dry without pump damage• excellent for shear sensitive liquids
Available in eight sizes from 3/4” to 4” ports with flow ranges from 1–215 gallons per minute.
Sanitary Fitting / Flow Rate / Maximum Size Solid
NDP-5-FDA 3/4” 3.4 GPM N/ADP-10-FDA 3/4” 6.0 GPM <1/32”NDP-15-FDA 1” 13.5 GPM <1/32”NDP-20-FDA 1” 31.7 GPM <1/16”NDP-25-FDA 1-1/2” 46.2 GPM <3/16”NDP-40-FDA 2” 107 GPM <9/32”NDP-50-FDA 2-1/2” 164 GPM <5/16”NDP-80-FDA 4” 215 GPM <13/32”
FDA Compliant Elastomers
Diaphragm Material TemperatureEPDM* 212°F (100°C)PTFE 212°F (100°C)Hytrel® (TPEE) 248°F (120°C)* EDPM available only for NDP-20 and larger pumps.
Air Supply Pressure (all sizes)20–100 PSI (1.4–7 kgf/cm²)
Additional Option20RA interior mechanical polish available for some models, consult Yamada.
Common Applications:
F D A C O M P L I A N T P U M P S
FDA Compliant 316 Stainless Steel 2”, 2-1/2”, and 4” sanitary ports
FDA Compliant 316 Stainless Steel 1” and 1-1/2” sanitary port
FDA Compliant 316 Stainless Steel 3/4” sanitary port
• Bulk Transfer• Food Packaging• Batching• Filter Press, Utility• Product Transfer
• Cosmetics• Personal Hygiene• Tanker/Railcar
Unloading
Pump includes grounding
wire
Pump includes grounding
wire
®
26
Listed Air-Powered Double Diaphragm Pump For Petroleum Products 19GL
CSA Gas Accessory Devices- Natural Gas-Operated Diaphragm Pumps
II 2 GD IIB/IIC 95°CEuropean Standard EN 13463-1:2001European Standard EN 809/ October 1998Directive 98/37/EC
Specialty Pumps
Atex Compliant PumpsYamada® ATEX Compliant Air Powered PumpsSelect Yamada® DP and Yamada® NDP Series pumps are compliant with ATEX guidelines for safe pump operation in potentially dangerous or explosive areas.
Available in 3/8 to 3” port sizes with flow rates from 1–215 GPM.
Please consult Yamada for current updates on compliance to ATEX standards.
CSA Certified PumpsYamada® CSA Certified Aluminum PumpsYamada offers a series of three CSA certified pumps, each built on the consistently designed foundation of the field proven DP and NDP Series pumps. Pumps are constructed with aluminum wetted components and durable Buna N elastomers certified by CSA International.
Available in 3/4” and 1” port sizes with flow rates from 1–46 GPM. Note: CSA Certification Class 3305-10 & 3305-90 limits natural gas temperature range from 32°F–125°F.
U.L. Listed PumpsYamada® U.L. Listed Code 79 PumpsYamada U.L. Listed pumps are manufactured for the petrochemical, chemical, and petroleum industries to meet safety requirements established by Underwriters Laboratory Code 79. Pumps include Aluminum wetted components with durable Hytrel® and PTFE elastomers, approved by U.L. to transfer volatile fluids.
Pumps are available in 3/4” and 1” port sizes, with flow ranges from 1–46 gallons per minute.
Pumps must be operated and installed according to U.L. Code 79.
A T E X | C S A C O M P L I A N T P U M P S | U . L . L I S T E D P U M P S
v Yamada® air-powered pumps are intrinsically safe
Side port option
Yamada® family of CSA Certified pumps
Yamada® U.L. Listed pumps
27®
Model NDP-25 HP
Model NDP-50 HP
H I G H P R E S S U R E P U M P S | P O W D E R P U M P S
Yamada® High Pressure2:1 Ratio PumpsYamada® High Pressure Pumps are designed for applications when a maximum 100 PSI operating pressure is insufficient to overcome system requirements.
The flow rate is roughly half of the equivalent size pump output, though a maximum discharge pressure of approximately 200 PSI can be achieved.
The 2:1 discharge ratio is achieved by applying air pressure to the surface area of both diaphragms, doubling the discharge output.
Port sizes: 3/4”, 1”, 1-1/2”, 2” or 3”
Capacity: 1 to 100 GPM
Max. Size Solid <13/32” (10mm)
Construction: Stainless Steel, Cast Iron, or Aluminum wetted materials
Diaphragm: Choice of six elastomers. PTFE not included.
Controls: No elaborate bypass, relief valves, or complicated controls required. Excellent pressure retention.
Model NDP-50BA-BH-2
Model NDP-80BA-BH-3
Yamada® PowderPowder Pumps Yamada powder pumps are designed to move bulk powders more effectively throughout your process vs. other unsafe and labor intensive means. These heavy duty pumps will consistently transfer fine low-bulk density dry powders in batch or bulk transfer applications.
Port sizes: 1, 1-1/2”, 2”, or 3”
Construction: Aluminum, Cast Iron, or Stainless Steel
Availability: Three series of pumps are offered, dependent upon requirements.
For additional information, please contact us toll free at (800) 990-7867 or visit www.yamadapump.com.
28®
YSC–3EX (left) / YSC-3B (right)Pump Controllers
FR-1 fits NDP-5, 15, & 20FR-3 fits NDP-25FR-4 fits NDP-40FR-5 fits NDP-50 & 80
FRL-2* fits DP-10FRL-4* fits XDP-40FRL-5* fits XDP-50 & 80
Pump sold separately
F I L T E R / R E G U L A T O R S | P U M P C O N T R O L L E R S
Filter/Regulators Yamada® FR/FRL Filter/RegulatorsThese easy-to-install filter/regulators provide the precise pressure control necessary to optimize pump performance and efficiency. They feature built-in moisture and particulate removal to 5 microns, analog pressure gauge, “locking” pressure control, standard manual drain, with optional automatic drain available. The automatic drain option is recommended for long term performance or when there is a lot of airline moisture.Broad Operating Parameters – Handles operating pressures from 7 psig to 125 psig and temperatures from 40 to 140°F.
Precise Pressure Adjustment – Locking adjustment knob provides precise and secure pressure control and allows for infinitely variable flow rates.
Quick Release Bayonet Polypropylene Bowl – Provides access to filter element with quick 1/4-turn of the bowl.
High Visibility Bowl Guard – Unique liquid level indicator allows monitoring up to 30 ft. away and 20 angles.
Embedded Pressure Gauge
Optional – Auto drain available for all filter/regulators.
* Lubrication oil bottle included
Pump ControllersYamada® YSC–3EX and YSC–3B ControllersYSC Series Pump Controllers are designed to control the operating speed of solenoid-operated air-powered double diaphragm pumps.
The YSC-3EX is a state-of-the-art controller used to maintain a predetermined cycle rate. The YSC-3B is used for batch metering applications.Controller functions: Speed control (cycle rate or flow rate), batch control
Speed range: 1–400 cycles per minute
Operating voltage: 110 VAC (220V–240V available)
Output voltage: 12 VDC
v 2% (+/-) accuracy achievable.
29®
DRD-100Dry-Run Detector
VGA-342Power Valve
LLC-2YLiquid Level Controller
v Works well, where other types of level controllers will fail.
L I Q U I D L E V E L C O N T R O L L E R | D R Y ‑ R U N D E T E C T I O N
Liquid Level Controller
Yamada® LLC-2Y Liquid Level ControllerThe Yamada® LLC-2Y Liquid Level Controller is a completely pneumatic system designed to automatically start and stop Yamada® air-powered double diaphragm pumps when the liquid level within a tank, sump, etc. reaches predetermined levels.
An extremely versatile controller, the LLC-2Y can be used in both single and dual pump applications with any size or model Yamada® pump. Used in a single pump configuration, it automatically controls either the filling or emptying of a tank or other vessel. When connected to two separate pumps, it will control both the filling and emptying of the tank. This dual pump capability is particularly useful for waste water storage, contaminated water clean up, and other applications where liquids are regularly transferred into and out of a single vessel.
The LLC-2Y consists of a sophisticated air logic control valve housed in an impact-resistant fiberglass reinforced plastic enclosure. As the liquid level within the tank rises or falls, the subtle changes in pressure are transmitted through high and low level dip tubes to the air logic control valve. When the liquid level reaches a predetermined level (tubing is cut in the field to the preferred HIGH and LOW level points), the power valve supplying air pressure to the pump is turned ON or OFF as required.
The LLC-2Y is capable of maintaining liquid levels in virtually an unpressurized vessel. Its liquid level control span ranges from a few inches to dozens of feet. For added convenience, it may be mounted up to 20 feet away from the pump.
Dry-Run DetectionYamada® DRD-100 Dry-Run DetectorThe Yamada® DRD-100 detects increases in air volume due to loss of prime or dry-running, and automatically shuts down the pump to prevent excess cycling and increased diaphragm wear.
Extends life of diaphragm
Eliminates air consumption in dry run applications
Prevents air valve from premature failure
Intrinsically safe operation
Supports remote warning systems
Works universally with all competitive pumps
v LLC and DRD units are compatible with all air-operated double diaphragm pumps.
30®
Pulsation DampenersYamada® AD Series Pulsation DampenersMetering/ Injection/ DosingEqualizes discharge pressure spikes, increasing accuracy.
Filter Press/Inline Filters Increases filter efficiency and life by providing a smooth flow.
Spraying Smooth, consistent spray pattern.
FillingEliminates inconsistent filling and splashing.
TransferEliminates harmful water hammer, preventing pipe and valve damage.
Yamada® AD Pulsation Dampeners incorporate a flow-through design which keeps solids in suspension, maintaining dampener effectiveness.
A completely automatic air motor self-relieves if reduction of discharge head condition occurs.
Port Sizes: 3/8”, 1”, 1-1/2”, and 2”
Dampener Model Fits Pump Models
AD-10 (3/8” port) NDP-5, NDP-15, DP-10, DP-15
AD-25 (1” port) NDP-20, NDP-25, NDP-32
AD-40 (1-1/2” port) NDP-40, XDP-40
AD-50 (2” port) NDP-50, NDP-80, XDP-50, XDP-80
Material
Aluminum (ADC-12) All models
Stainless Steel (316) All models
Cast Iron AD-25, AD-40, AD-50
Polypropylene (PPG) All models
Kynar® AD-25, AD-50
DiaphragmChoice of seven elastomers. Diaphragm is typically interchangeable with the pump’s diaphragm.
Air Side Coating OptionPTFE grey coating (XP)
For additional information, please contact us toll free at (800) 990-7867 or visit www.yamadapump.com
Model AD-10
Model AD-25
Model AD-50
Model AD-40
P U L S A T I O N D A M P E N E R S
31®
PTFE Grey Coating (XP) v All surfaces, in and out, are coated.
Rubber CompoundsNeoprene (CR)Excellent for non-corrosive abrasive applications.Identification: Dull Black with No Dot Temperature Range: 0°F to 180°FBuna-N (NBR)Excellent for petroleum based fluids. Identification: Black with a Red or Pink Dot Temperature Range: 10°F to 180°FNordel™ (EPDM)Excellent for low temperatures, caustics and some acids.FDA Compliant Material (must be specified).Identification: Black with Green DotTemperature Range: -40°F to 212°FViton® (FKM)Excellent for aggressive fluids and high temperature applications.Identification: Black with Silver or Blue DotTemperature Range: -20°F to 248°F
Thermoplastic CompoundsHytrel® (TPEE)Excellent general-purpose diaphragm for non-corrosive abrasive applications and high-flex life. FDA compliant material.Identification: Tan/Cream material with No DotTemperature Range: 0°F to 248°FSantoprene® (TPO)Excellent for acids or caustics with a very high flex life. Identification: Black ThermoplasticTemperature Range: -10°F to 180°FPTFEExcellent choice for pumping highly aggressive fluids, including solvents.Identification: White diaphragm with No DotTemperature Range: 40°F to 212°F
n Please note that excessive inlet pressure or excessive suction lift can shorten diaphragm life. Please consult Yamada when operating pump at extreme high or low conditions.
Optional CoatingsAir motor PTFE grey coating (XP) is available for Yamada pumps for two primary reasons: Environment: Pump installation in a chemically aggressive location where material or fumes not compatible with aluminum may contact the air motor. Diaphragm Failure: If properly selected, the coating will defend the major aluminum air valve components from the fluid being pumped.For internal and external protection, the four major air motor components are independently coated, then assembled.
Note: Coating is not available for NDP-5 & NDP-15 series pumps.
D I A P H R A G M S | C O A T I N G S
Pump DiaphragmsWhat to Consider When Selecting the Proper Diaphragm Material
• Chemical resistance• Cost• Estimated flex life• Temperature limitations• Abrasion resistance
32®
M O D E L N O M E N C L A T U R E | P U M P O P T I O N S | I N S T A L L A T I O N D R A W I N G
Pump Options
xxx-xx x x x x x
Pump Series
Check Valve Type
Body Material
Diaphragm Material
Model Number Nomenclature
Ideal Air-Powered Double Diaphragm Pump Installation
C: Neoprene (CR) N: Buna N (NBR) E: Nordel™ (EPDM) T: PTFE V: Viton® (FKM) H: Hytrel® (TPE)
TPO: Santoprene® SS: 316 Stainless Steel
ball & seat only S1: 316 SS ball only S2: 316 SS seat only
Optional Ball Valve/Seat Materials
To properly specify a Yamada pump, the following information is required:
A complete specification form and pump selector is available at yamadapump.com
4 Material to be pumped (viscosity & specific gravity)
4 Pumping temperature
4 Corrossive/abrasive?
4 Available air supply4 Discharge pressure
(PSI or TDH)4 Suction line details4 Flow rate & operating
condition
ManifoldsI: Split suction manifoldZ: Both manifolds splitO: Split discharge manifoldMP: Multiport manifoldFLG: Flanged manifold
(cast iron only) (NDP-15/20/25/40/50/80)
Air MotorsXP: PTFE grey coatedPP: Glass-filled
polypropylene (20/25/50 series only)
Specialty OptionsBH-1: Powder Pump Series 1BH-2: Powder Pump Series 2BH-3: Powder Pump Series 3HP: 2:1 High Pressure pumpEP-20 RA: 20RA Electro-
polished finish (NDP-5/10/15/20/25; SS
only)FDA: FDA compliantUL: U.L. ListedCSA: CSA ListedD: Drum Pump
(DP-10, NDP-15/20, G15 only)
Proximity SensorsP1: Proximity sensor
10-30 VDC
P2: Proximity sensor 24-240 VAC
P1-PP:Proximity sensor 10-30 VDC (PP Air Motor)
P2-PP:Proximity Sensor 24-240 VAC (PP Air Motor)
MiscellaneousAP: Abrasion padsK: Kynar Valve SeatsL: Destroke (NDP-20-80)V: Viton BallsT: PTFE BallsTS: PTFE SeatsU: High performance
muffler1: PTFE O-RingsQ: DM-2 Diaphragm
Monitory System 12VQ-2401: DM-2 Diaphragm
Monitoring System 115VAC/12VDC
SVT-225:Smart Valve (NDP-20/25/32)
SVT458:Smart Valve (NDP-40/50/80)ONE-UP® Diaphragms
G: No BackerG-A: Abrasion Reistant PTFEG-C: NeopreneG-E: EPDMG-V: Viton
Additional Options
33®
Yamada® is a registered trademark of Yamada America, Inc. SolidPRO® Designed to Pump Fluids Containing Solids is a registered trademark of Yamada America, Inc. Xtreme Duty Pro XDP® is a registered trademark of Yamada America, Inc. The Proof’s in the Pump® is a registered trademark of Yamada America, Inc. AutoCAD® is a registered trademark of Autodesk, Inc. Hytrel® is a registered trademark of E.I. du Pont de Nemours and Company. Kynar® is a registered trademark of Arkema.
Nordel™ is a trademark of DuPont Dow Elastomers. Ryton® is a registered trademark of Chevron Phillips Chemical Company. Santoprene® is a registered trademark of Monsanto Co. Viton® is a registered trademark of DuPont Performance Elastomers. Flaretek® is a registered trademark of Entegris®. Garlock ONE-UP® is a registered trademark of W.L. Gore & Associates.
Due to Yamada’s continued commitment to product improvement, specifications may change without notice.
Pump Requirements
Using Performance Curves
To determine compressed air requirements and proper size for a Yamada air-powered double diaphragm pump, two elements of information are required:
1 Required Flow Rate (GPM)
2 Total Dynamic Head (TDH)
As an example, consider an NDP-40 Series Pump performance curve with rubber diaphragms, pumping 80 GPM at 50-ft TDH.
Point A ( ) on the performance curve is where the desired Flow Rate (GPM) and Total Dynamic Head (TDH) points intersect. This point determines compressed air requirements for the particular pump.
At performance point A ( ), the pump will require approximately 75 PSI air inlet pressure. To arrive at this figure, follow the solid blue curve (—) to the left to read the air pressure rating in PSI.
By looking at the nearest red curve (—), it is determined the pump will require approximately 80 SCFM (Standard Cubic Feet per Minute) of air volume.
P E R F O R M A N C E C U R V E S
Specified Suction Lift
With a suction lift of 12-ft, pump rate decreases by approximately 20%. Valid for pumps 3/4” and larger; data varies with pump configuration.
Viscous Liquids Performance Data
During the conveyance of a fluid with a viscosity of 6000 cPs, the pump rate decreases to 60% of its rated value (100% = water). Valid for 3/4” pumps & larger.
Note: Please consult Yamada for maximum viscosity capabilities. Additionally, when both the pressure and temperature exceed 70 PSI and 180º F, respectively.
Decre
ase o
f Rat
ed Pu
mp F
low
(%)
Decrease in Flow Rate as Suction Head Lift Rises
Suction Head Lift (feet)
100%
80%
60%
40%
20%
0%0’ 3’ 6’ 9’ 12’ 15’ 18’ 21’ 24’ 27’ 30’
Decrease in Flow Rate From Increase in Viscosity
Rate
d Flo
w Ra
te (p
erce
nt)
Viscosity in Centipoise (cPs)
100%
80%
60%
40%
20%
0% 2,000
1 (water)
4,0006,0008,00010,00012,00014,00016,00018,00020,000
—
Engineered to Perform.Designed to Outlast.
Yamada America, Inc.955 East Algonquin RoadArlington Heights, IL 60005800 990-7867 Toll-Free
847 631-9200 Phone 847 631-9273 Faxsales@yamadapump.comwww.yamadapump.com
YOUR LOCAL DISTRIBUTOR:
Designed and printed in the U.S.A.
Form #GB0318 (Replaces Form #GB0216)