Post on 04-Jun-2020
SMILE WITH US
+7(707)8166356
+7(775)7820687
+972546410302
WWW.IDL-IMPLANTS.COM
IDL IDENTAL TECHNOLOGIES LTD IS
SUSTAINABLY DEVELOPING COMPANY,
TAKING FIRM POSITIONS IN THE AREA OF
DEVELOPMENT, PRODUCTION AND
DISTRIBUTION OF IMPDISTRIBUTION OF IMPLANTS, PROSTHETIC
COMPONENTS AND VARIOUS STOMATOLOGIC
SURGICAL INSTRUMENTS.
ABOUT US01
PURPOSE OF OUR COMPANY IS ACHIEVEMENT
OF MAXIMUM POSSIBLE AND COMPLETE
INTEGRATION OF IDL IDENTAL TECHNOLOGIES
LTD PRODUCTS.
ININITIAL ADHESION AND LONG-TERM STABILITY
OF ADJACENT BONE DEPEND ON IMPLANTS’
MACRO-MECHANICAL CHARACTERISTICS,
THEIR DESIGN AND SURFACE STRUCTURE.
DIRECT IMPACT OF THESE CHARACTERISTICS
ON FAVORABLE OUTCOME IN MODERN
IMPLANTOLOGY WAS PROVED BY MANY
SUCCESSFUL CLINICAL RESUSUCCESSFUL CLINICAL RESULTS.
OUR MISSION02
TECHNOLOGIES LTD
IMPLANTS | TOOLSINSTRUMENTS
IDL DENTAL
CONTENT
Content
About us
SLA Surface
Implant Progressive
Implant Prime
Implant Standard
Implant One PieceImplant One Piece
Straight titanium abutments
Angulated titanium abutments
Plastic abutments
Ball abutments
Healing caps
Transfers and Analogs
Multi Unit system Multi Unit system
Conical abutments
Conical healing abutments
Conical transfer copings, replica
Instruments
Surgical drills
Surgical sets
2
3 - 4
5 - 6
7 - 8
9 - 10
11 - 12
13 - 1413 - 14
15 - 18
19 - 22
23 - 24
25 - 26
27 - 28
29 -30
31 - 3431 - 34
35 - 36
37 - 38
39 - 40
41 - 44
45 - 46
47 - 50
2
ABOUT US
IDL DENTALTECHNOLOGIES LTD
IDL DENTAL TECHNOLOGIES LTD
is sustainably developing company, taking firm positions in the area of development, production and distribution of implants, prosthetic components and various stomatologic surgical instruments. Innovation system of dental implants IDL was developed on the basis of long-term experience and researches of world leaders in the area of implantology. Their osseointegration is achieved due to precision manufacturing process and multiple treatment of implants’ surface.
IDL DentalIDL Dental Technologies Ltd developed prosthesis system for internal hex implants, with conic joint, according to the principle “one prosthetic platform almost for all diameters”, it enables to select abutments, following the requirements of rebuilding procedure. IDL Dental Technologies Ltd strictly observes international standards on quality control and provides lifetime warranty on all kinds of implants, which is critical to mental equilibrium, evenness and professional confidence of each implant user and its patients.
PProducts of IDL Dental Technologies Ltd are officially authorized for promotional marketing in the USA. It corresponds to quality standard ISO 13485:2003 composed of medical products conformance evaluation, standard ISO 9001:2015, has EN ISO 13485:2012. Variety of our products provides opportunity of individual approach to treatment of the patient, considering dental plates’ anatomic features and ensuring excellent esthetics.
Many innovations in IDL system were offered by dental professionals with vast experience in the area of implantology. Clinical situations of complete rehabilitation on implants of IDL Dental Technologies Ltd were presented in many print publications.
IDL DentalIDL Dental Technologies Ltd performs various educational programmes, meeting the needs of experiences specialists – implant users and newcomers GP dentists. It participates in charitable acts. IDL Dental Technologies Ltd pays special attention to qualitative service and customers’ support within framework of the action “Quality of life for parents”.
3
Company IDL Dental Technologies Ltd provides possibility to professional dentists to complete online training for professional development.
Moreover, the company IDL Dental Technologies Ltd rearranged efficient plan for delivery and sale of its products to dealers all over the world.
Products of IDL conquer new countries from year to year.
The company has local sales and seThe company has local sales and service centers for the purpose of the best servicing.
Price, high quality and service are basic principles of our work, which allow professional dentists all over the world to develop with us, granting beautiful smile and another quality of life to the patients!
IMPLANT SYSTEM
Purpose of our company is achievement of maximum possible and complete integration of IDL Dental Technologies Ltd products and solution.
Initial engInitial engraftment and long-term stability of adjacent bone depend on implant’s macro-mechanical features, their design and surface structure.
Direct impact of these features on favorable outcome in modern implantology was proved by many successful clinical results.
Our system was dOur system was developed in such a manner that it acts as full replacement of natural teeth.
All system components operate consistently with the sole purpose – assurance of reliable clinical benefit and life-time functional of dental implant.
ADVANTAGES OF OUR IMPLANTS ARE:
− convenience during installation;− successful osseointegration, achieved by high level of cleaning from mechanical particles and level of sterilization;− powerful capabilities in prosthetics;− li− life-time preservation of application properties, and also predictable success under conditions of application of immediate functional loading
4
ZOOM X 200
ZOOM X 1500
ZOOM X 6000
IMPLANT SURFACE,ELECTRON MICROSCOPE IMAGE
Scientific investigations all over the world prove that qualitative implant service is a key to optimal osseointegration.
Characteristics of surface of implantable material have a special impact on adhesion and growth of tissues nearby implant service or directly at it. Implants of IDL Dental Technologies Ltd are manufactures of fine-grained titanium alloy of Ti-6AI-4V ELI brand.
This is high-stThis is high-strength, durable, biocompatible material. Years of researches and development of IDL Dental Technologies Ltd led to creation of perfect surface SLA Surface, securing the quickest osseointegration.
Implant suImplant surface SLA Surface is formed during complex process of sand blasting with large grain powder of aluminium dioxide with following acid leaching during which aluminium dioxide creates a porous surface.
Land-form, increasing implant surface area in three dimensions and ensuring large absorption of plasma protein at implant surface after its installation, is created due to this process.
StructuStructure and surface roughness of the implant in the result of sand blasting and acid etching improve implant osseointegration during first contact with pre-implant tissues.
Modern surface processing technologies, used during production of dental implants, provide the highest level of the quality.
Advantages of SLA SURFACE:
- Imp- Improved contact of implant with bone - Acceleration of osseointegration- High initial stability- qualitative osseointegral link - adhesion of peri-implant tissues
SLA SURFACE
5
Spiral implant with internal hex Progressive provides easy controlled installation and excellent initial stability on difficult areas of bone tissue. Developed for surgical intervention with various types of bones.
Their geometry design includes double compression thread, three spinal canals, coming from apex, and micro-rings on implant collar. All implants of implant system IDL Dental Technologies Ltd were performed from the most popular alloy in the world for dental surgery and implantology 5Ti6Al-4V ELI, processed by free jet blast and acid-etched in accordance with the special standastandard for surfaces processing. Surface of implant SLA promotes quickest adhesion of existing and formation of new peri-implant bone, ensuring long-term, beautiful, functional and reliable result.
Advantages of implant Progressive makes it ideal for any implant procedures – from the simplest during restoration of one tooth to the most difficult during complete prosthetic oral rehabilitation.
Internal Hex
SLA surfaceprovides highosteintegrationStep for
collecting bone
Spiral, sharp and deep threads
IDL PROGRESSIVE IMPLANT
IDL DENTALTECHNOLOGIES LTD
7
0 = 3.0NARROW
0 = 3.5STANDARD
0 = 3.75STANDARD
0 = 4.2STANDARD
0 = 5.0STANDARD
0 = 6.0STANDARD
10IPR 1030
11.5IPR 1130
13IPR 1330
8IPR 0835
10IPR 1035
11.5IPR 1135
13IPR 1335
16IPR 1635
6IPR 0637
8IPR 0837
10IPR 1037
11.5IPR 1137
13IPR 1337
16IPR 1637
6IPR 0642
8IPR 0842
10IPR 1042
11.5IPR 1142
13IPR 1342
16IPR 1642
8IPR 0850
10IPR 1050
11.5IPR 1150
13IPR 1350
8IPR 0860
10IPR 1060
11.5IPR 1160
13IPR 1360
L L L L L L
Drilling speed (RPM)
Drill diameter (mm)
900-1200
2
800-1000
2.5
500-700
2.8
400-700
3.2
400-600
3.65
400-600
4.2
300-500
4.8
300-500
5.2
DRILLING PROTOCOL
Color of cap indicates diameter of implant.
Color indicating thefinal drill colofinal drill color.
Outside tube Inside tube
Clip carrier
Cover screw
Implant
Components
PACKAGE CONTENT
8
Implant Prime is very popular due to advanced geometrical construction with new additional surface processing. Screw implant with internal hex Standard. Combination of conical platform of the body and variable design of thread with double step provide ergonomic advantages and makes installation less traumatizing for surrounding bone.
The implant is used on all types of a bone, under the two-stage surgical protocol. Implants of Prime will satisfy requirements as the beginning and skilled implantologists.
MicMicro-rings on implant collar expand implant contact area with bone in gingival margin of implant bed, follows by mitigation of osseous resorption of alveolar process Proved clinical fact: shape of conic implant Prime imitates shape of root of natural toothUniversal shape of the implant provides the best results by all therapeutic indications.
MAXIMUM ACCEPTABILITY:
Unique surface processing improves implant stability due to quickest adhesion in bone tissue. Horizontal macro-channels at the basis of the implant are intended for improvement of integration of soft tissues and stabilization of bone cortex.
Internal Hex Colical Platform
SLA surfaceprovides highosteintegrationStep for
collecting bone
Spiral, double, sharp and deep threads
IDL PRIME IMPLANT
IDL DENTALTECHNOLOGIES LTD
9
6IRP 0643
8IRP 0843
10IRP 1043
11.5IRP 1143
13IRP 1343
16IRP 1643
6IRP 0650
8IRP 0850
10IRP 1050
11.5IRP 1150
13IRP 1350
16IRP 1650
8INP 0835
10INP 1035
11.5INP 1135
13INP 1335
0 = 3.5NARROW
0 = 4.3REGULAR
0 = 5.0REGULAR
L L L L L L
Drilling speed (RPM)
Drill diameter (mm)
900-1200
2
800-1000
2.2
500-700
2.7
400-700
3.3
400-600
3.7
400-600
4
300-500
4.2
300-500
4.5
DRILLING PROTOCOL
Color of cap indicates diameter of implant.
Color indicating thefinal drill colofinal drill color.
Outside tube Inside tube
Clip carrier
Cover screw
Implant
Components
PACKAGE CONTENT
10
Screw implant with internal hex Standard. Combination of conical shape of the body and variable design of thread with double step provide ergonomic advantages and makes installation less traumatizing for surrounding bone.
Standard is recommended for 1, 2 and 3 type of one, but can be applied in 4 subject to appropriate modification of surgical protocol.
Implant Standard is solution for all implant procedures, from restoration of one tooth till restoration of mouth cavity at complete edentulism.
Internal Hex
SLA surfaceprovides highosteintegrationStep for
collecting bone
Standert sharp,deep not threads
IDL STANDARD IMPLANT
IDL DENTALTECHNOLOGIES LTD
11
0 = 3.5STANDARD
0 = 3.75STANDARD
0 = 4.2STANDARD
0 = 5.0STANDARD
0 = 6.0STANDARD
8IST 0835
10IST 1035
11.5IST 1135
13IST 1335
16IST 1635
8IST 0837
10IST 1037
11.5IST 1137
13IST 1337
16IST 1637
8IST 0842
10IST 1042
11.5IST 1142
13IST 1342
16IST 1642
8IST 0850
10IST 1050
11.5IST 1150
13IST 1350
8IST 0860
10IST 1060
11.5IST 1160
13IST 1360
L L L L L L
Drilling speed (RPM)
Drill diameter (mm)
1200-1500
1.9
900-1200
2
800-1000
2.5
500-700
2.8
400-700
3.2
400-600
3.65
300-500
4.2
200-400
4.8
200-400
5.2
DRILLING PROTOCOL
Color of cap indicates diameter of implant.
Color indicating thefinal drill colofinal drill color.
Outside tube Inside tube
Clip carrier
Cover screw
Implant
Components
PACKAGE CONTENT
12
One-part implants of IDL Dental Technologies Ltd are intended for surgical stage during restoration of denture defects.They are installed instead of missing teeth in the area of anterior teeth of low jaw in case of small horizontal component of the defect, restricted by adjacent teeth I order to support artificial dental prosthesis, crown works, bridges during restoration of masticatory function.
It is recommended to join dental protheses, based on two and more adjacent narrow implants with diameter 3 mm in the area of anterior teeth of low jaw.
NarNarrow implant is intended for conventional and direct implantation after tooth extraction.In case of one-step surgical implantation, implant can be loaded if functional load is proper and initial implant stability was achieved.
One-piece,narrow implantcombined with abatment
SLA surfaceprovides highosteintegration
Spiral, sharp and deep threads
IDL ONE PIECE IMPLANT
IDL DENTALTECHNOLOGIES LTD
13
0 = 2.5ONE PIECE
0 = 3.0ONE PIECE
0 = 3.3ONE PIECE
10IOP 1025
11.5IOP 1125
13IOP 1325
16IOP 1625
10IOP 1030
11.5IOP 1130
13IOP 1330
16IOP 1630
10IOP 1033
11.5IOP 1133
13IOP 1333
16IOP 1633
L L L L
Drilling speed (RPM)
Drill diameter (mm)
900-1200
2
800-1000
2.3
500-7000
2.7
DRILLING PROTOCOL
Color of cap indicates diameter of implant.
Color indicating thefinal drill colofinal drill color.
Outside tube Inside tube
Implant
Implant carrier
Components
PACKAGE CONTENT
14
5mm 7mm 9mm 11mm 13mm 15mm
ISTA 15ISTA 13ISTA 11ISTA 9ISTA 7ISTA 5
Straight Abutments
9mm 11mm 13mm
ISTWA 13ISTWA 11ISTWA 9
Straight Abutments WIDE
7mm 9mm 11mm 13mm
ISTNA 11 ISTNA 13ISTNA 9ISTNA 7
Straight Abutments Narrow Platform
Straight titanium abutments with hex. There is a thread for screw inside the abutment.Straight abutments are available in three kinds: standard, narrow and wide. Wide ones are used in grinder teeth area. Narrow ones are used when space is limited, usually in frontal zone. Size tables for each kind of straight abutments are provided below. Abutments are completed with screws.
IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!
STRAIGHT ABUTMENS
IDL DENTALTECHNOLOGIES LTD
16
Used for solution of esthetic problems in vestibulum oris, follow the shape of gingival line. Used for creation of cemented constructions.
Anatomic shape of abutments allows reducing of time, spending on cutting of standard abutments. Height of abutment shoulder - 1, 2, 3, 4 mm
Abutments are completed with screws.
9mmShouder 1mm
9mmShouder 2mm
9mmShouder 3mm
9mmShouder 4mm
ISTSA 01 ISTSA 02 ISTSA 03 ISTSA 04
Straight Abutments With Shouder
9mmShouder 1mm
9mmShouder 2mm
9mmShouder 3mm
9mmShouder 4mm
ISTSWA 01 ISTSWA 02 ISTSWA 03 ISTSWA 04
Straight Abutments With Shouder Wide
IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!
ANATOMIC ABUTMENTSWITH SHOULDER
IDL DENTALTECHNOLOGIES LTD
18
9mm 11mm 13mm
ISTAA 1509 ISTAA 1511 ISTAA 1513
Angular Abutments 15°
Used when implant is installed at angle.Used for cement-retained restoration.Completed with screws.
9mm 11mm 13mm
ISTAA 2509 ISTAA 2511 ISTAA 2513
Angular Abutments 25°Used when implant is installed at big angle.Used for cement-retained restoration.Completed with screws.
9mm 9mm
ISTAA 3509 ISTAA 4509
Angular Abutments 35°, 45°
9mm 9mm
ISTSAA 9 ISTSAA 10
Angular Abutments Narrow 15°, 25°
IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!
ANGULAR ABUTMENTS
IDL DENTALTECHNOLOGIES LTD
20
9mmShouder 1mm
9mmShouder 2mm
9mmShouder 3mm
9mmShouder 4mm
ISTAA 15-1 ISTAA 15-2 ISTAA 15-3 ISTAA 15-4
Angular Abutments With Shoulder 15°
9mmShouder 1mm
9mmShouder 2mm
9mmShouder 3mm
9mmShouder 4mm
ISTAA 25-1 ISTAA 25-2 ISTAA 25-3 ISTAA 25-4
Angular Abutments With Shoulder 25°
IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!
Used for solution of esthetic problems in vestibulum oris, follow the shape of gingival line. Used for cement-retained restoration.Height of abutment shoulder - 1, 2, 3, 4 mmCompleted with screws.
ANATOMIC ANGULAR ABUTMENTS WITH SHOLDER
IDL DENTALTECHNOLOGIES LTD
22
UCLA Plastic Abut.Hex
Plastic Abut.Non Hex
Plastic Abut.Narrow Hex
TitaniumBase
TitaniumScrew
TitaniumScrew Blue
TitaniumScrew Narrow
ISPAH 9 ISACH 9 ISSACH 9 ITB ISSA 083 ISSAB ISSSAIUCLA
IMPORTANT! Recommended effort to tighten the abutment screw 30 newtons per centimeter!
Plastic abutment with hex
Plastic burnout abutments with internal hex Used for manufacturing of single constructions with autodrive fixation in chewable areas, in case of shortage of clinical weight for cement-retained restoration (at least 4 mm). Usage for manufacturing of individual abutments for further cement-retained restoration of esthetic restorations is possible.
Plastic abutment without hex
Plastic burnout abutments without hex. Used for manufacturing of bridge constructions with auPlastic burnout abutments without hex. Used for manufacturing of bridge constructions with autodrive fixation, in case of short-age of clinical weight for cement-retained restoration (at least 4 mm) and mismatch of axis of installed implants less than on 10°.
Plastic abutment with titanium base
Plastic burnout abutments with internal hex at titanium platform. Used for manufacturing of highly esthetic individual abutments from press-ceramics and zirconium dioxide, resulting in maximum accurate reconstruction of esthetics of cervical part of future construction.
Metal-free part is adhered to titanium platform, using glue. This construction allows transferring of load of fixing screw directly on titanium platform. It prevents them from strain and following destruction opposed to entirely zirconium abutments. Completed with screws.
Titanium base for zirconium and ceramics
Used as a basis for manufacturing of individual zirconium and ceramic two-component (hybrid) abutments, screw-retained dental prosthesis, using CAD/CAM technologies. Completed with screws.
PLASTIC ABUTMENTS T-BASE AND SCREWS
IDL DENTALTECHNOLOGIES LTD
24
IMPORTANT! Recommended effort to tighten the abutment screw 20 newtons per centimeter!
0.5mm 1mm 2mm 3mm 4mm 5mm 6mm
ISBA 0.5 ISBA 1 ISBA 2 ISBA 3 ISBA 4 ISBA 5 ISBA 6
Standard Ball Attachment
1mm 2mm 3mm 4mm 5mm 6mm
ISBAN 1 ISBAN 2 ISBAN 3 ISBAN 4 ISBAN 5 ISBAN 6
Ball Attachment Narrow Platform
ISMC ICN 003 ICN 001 ICN 002
Metal Cap Silicon Cap Silicon Cap Soft Silicon Cap Extra Soft
Ball Attachments Caps
Ball abutments are used for removable denture fixation.Delivered at height 0.5, 1, 2, 3, 4, 5, 6 mm. Selection depends on gingival height.These abutments are used with stainless steel cap with silicone cap. Silicone caps are available with various degree of hardness.
BALL ATTACHMENT
IDL DENTALTECHNOLOGIES LTD
26
1mm 2mm 3mm 4mm 5mm 6mm
ISHC 1 ISHC 2 ISHC 3 ISHC 4 ISHC 5 ISHC 6
Healing Cap Standard Platform 4.5
2mm 3mm 4mm 5mm 6mm
ISHCW 2 ISHCW 3 ISHCW 4 ISHCW 5 ISHCW 6
Healing Cap Wide Platform 5.5
1mm 2mm 3mm 4mm 5mm 6mm
ISHCN 1 ISHCN 2 ISHCN 3 ISHCN 4 ISHCN 5 ISHCN 6
Healing Cap For Narrow Platform 3.0
Healing caps are intended for preparation of place for installation of dental prostheses. Offered healing caps: standard, narrow and wide.Sizes for each kind of healing caps are provided below.Height of healing caps is determined by height of mucous.
HEALING CAP
IDL DENTALTECHNOLOGIES LTD
28
Standart Analog 3.75 Wide Analog 5.0 Narrow Analog 3.0
ISIA 375 ISIA 500 ISISA 300
Analogs
TransferClip Tray13mm
TransferClip Tray9mm
TransferOpen Tray13mm
TransferClose Tray9mm
Transfer NarrowOpen Tray13mm
ISTC 13 ISTC 9 IST 13 IST 9 ISST 13
Transfers
Analogs is manufactured from stainless steel.Used as implant analog in dental laboratory.Allows making preparation for laboratory models.
Screw and clip transfer copings are manufactured from stainless steel.Delivered for close and open spoon for moulding teeth.
ANALOGS, TRANSFERS
IDL DENTALTECHNOLOGIES LTD
30
Metal PositionHolder
Analog Transfer Open Closed PlasticTransfer Cap
Healing Cap ScrewPlastic SleeveAbutment
Titanium SleeveAbutment
IMMPH IMUA IMUTO IMUTC IMUPSA IMUTSA IMUHC IMUS
Multi Unit Tools
1mm 2mm 3mm 4mm 5mm
ISMU 1 ISMU 2 ISMU 3 ISMU 4 ISMU 5
Standard Multi Unit
Multi Unit is intended for portable prosthetics.
This system allows achieving of more effective result due to its low profile.
Moreover, useful life of the construction is increased in ten times in comparison with standard system Ball Attachment due to usage of PEEK materials in copings.
IFSBMU 1
IFSBMU 2
IFSBMU 3
IFSBMU 4
IFSBMU 5
STANDARD MULTI UNIT
IDL DENTALTECHNOLOGIES LTD
32
Metal PositionHolder
Analog Transfer Open Closed PlasticTransfer Cap
Healing Cap ScrewPlastic SleeveAbutment
Titanium SleeveAbutment
IMMPH IMUA IMUTO IMUTC IMUPSA IMUTSA IMUHC IMUS
Multi Unit Tools
1mm 2mm 3mm
IAMU 9-1 IAMU 9-2 IAMU 9-3
Angulated Multi Unit 9°
1mm 2mm 3mm
IAMU 17-1 IAMU 17-2 IAMU 17-3
Angulated Multi Unit 17°
1mm 2mm 3mm
IAMU 30-1 IAMU 30-2 IAMU 30-3
Angulated Multi Unit 30°
Multi Unit is intended for portable prosthetics at angle 9°, 17°, 30°.
This system allows achieving of more effective result due to its low profile.
MoMoreover, useful life of the construction is increased in ten times in comparison with standard system Ball Attachment due to usage of PEEK materials in copings.
IFABMU 9-1
IFABMU 9-2
IFABMU 9-3
IFABMU 17-1
IFABMU 17-2
IFABMU 17-3
IFABMU 30-1
IFABMU 30-2
IFABMU 30-3
ANGULATED MULTI UNIT
IDL DENTALTECHNOLOGIES LTD
34
9mm RP 13mm RP 9mm NP 13mm NP Castable HEX RP Castable HEX NP
ISSAC-9 RP ISSAC-13 RP ISSAC-9 NP ISSAC-13 NP ISACHC-RP 4.3 ISACHC-NP 3.5
Standard Abutment Conical
1mm RP 2mm RP 3mm RP 1mm NP 2mm NP 3mm NP
ISSAC-1-RP ISSAC-2-RP ISSAC-3-RP ISSAC-1-NP ISSAC-2-NP ISSAC-3-NP
Straight Conical Abutment With Shoulder
Conical Abutment Angular RP 15° Conical Abutment Angular NP 15°
ISCAA-RP ISCAA-NP
Angulated Abutment Conical 15°
Straight titanium abutments with conical platform and internal hex.There is a thread for screw inside the abutments. Dimension charts are provided below for each kind of conical abutments. Abutments are completed with screws.
CONICAL ABUTMENTS
IDL DENTALTECHNOLOGIES LTD
36
2mm RP 3mm RP 4mm RP 5mm RP
IHCC-2-RP IHCC-3-RP IHCC-4-RP IHCC-5-RP
Healing Cap Conical RP
2mm NP 3mm NP 4mm NP 5mm NP
IHCC-2-NP IHCC-3-NP IHCC-4-NP IHCC-5-NP
Healing Cap Conical NP
Healing caps are intended for preparation place for installation dental prostheses.Proposed healing abutments with conical platform ensure additional stability.Sizes are provided below.Height of healing abutments is determined by height of mucous.
HEALINC CAP CONICAL
IDL DENTALTECHNOLOGIES LTD
38
Transfer ConicalShort RP
Transfer ConicalLong RP
Transfer ConicalShort NP
Transfer ConicalLong NP
IITCS-RP IITCS-NP IITCL-NPIITCL-RP
Transfer Conical
Analog Conical RP Analog Conical NP
ISAC-RP ISAC-NP
Analog Conical
Abutments Screw Conical RP Abutments Screw Conical NP
ISCA-RP ISCA-NP
Screws for Conical Abutments
Analog is manufactured from stainless steel.Used as implant analoa in dental laboratory.Allows making preparation for laboratory models.Transfers are manufactured from stainless steel.Delivered for open spoon for moulding teeth.
CONICAL TRANSFER, ANALOG, SCREWS
IDL DENTALTECHNOLOGIES LTD
40
Ratchet Driver7mm
Ratchet Driver10mm
Ratchet Driver15mm
Ratchet One Piece Driver Key
Handle Driver7mm
Handle Driver10mm
Handle Driver15mm
IRDKN-7 IRDKN-10 IRDKN-15 IOPDK IHDK-7 IHDK-10 IHDK-15
Ratchet and Handle Drivers 1.25
Ratchet ImplantDriver 7mm
Ratchet ImplantDriver 10mm
Ratchet ImplantDriver 15mm
Ratchet ImplantDriver Conical RP
10mm
Ratchet ImplantDriver Conical RP
15mm
Ratchet ImplantDriver Conical NP
10mm
Ratchet ImplantDriver Conical NP
15mm
IRDK-7 IRDK-10 IRDK-15 IRDKRP-10 IRDKRP-15 IRDKNP-10 IRDKNP-15
Ratchet and Handle Drivers 2.42
Motor MountImplant22mm
Motor MountImplant 28mm
Motor MountAbutment22mm
Motor MountAbutment28mm
Motor MountConical RP22mm
Motor MountConical RP28mm
Motor MountConical NP22mm
Motor MountConical NP28mm
IMMI-22 IMMI-28 IMMA-22 IMMA-28 IMMCRP-22 IMMCRP-28 IMMCNP-22 IMMCNP-28
Motor Drivers
Instruments of the company IDL Dental Technologies Ltd are manufactured from surgical stainless steel and are heat treated, what essentially protects instrument against tear and wear.
INSTRUMENTS
IDL DENTALTECHNOLOGIES LTD
42
Implant DriverIID
Drill ExtenderIDE
Depth ProbeIDP
Ratchet WrenchIRW
Standard RatchetISR
Trephines
3.0/4.0 mm IDT-34
4.0/5.0 mm IDT-45
5.0/6.0 mm IDT-56
Tissue Punch
3.5 mm ITP-35
4.0 mm ITP-40
4.5 mm ITP-45
5.0 mm ITP-50
Parallel Pin
16 mmIPP-16
10 mmIPP-10
OTHER TOOLS
TOOLS
IDL DENTALTECHNOLOGIES LTD
44
MD 1.9mm 2.0mm 2.5mm 2.8mm 3.2mm 3.65mm 4.2mm 4.5mm 4.8mm 5.2mm
IMD ISD-20 ISD-25 ISD-28 ISD-32 ISD-36 ISD-42 ISD-45 ISD-48 ISD-52
Standard Cyllindrical Drills External Irrigation
2.4mm1.8mm
2.7mm1.8mm
2.8mm1.8mm
3.2mm2.0mm
3.3mm2.0mm
3.7mm2.5mm
4.0mm2.7mm
4.5mm2.7mm
5.5mm3.1mm
ICD-24 ICD-27 ICD-28 ICD-32 ICD-33 ICD-37 ICD-40 ICD-45 ICD-55
Conical Cyllindrical Drills External Irrigation
3.8mm / 4.2mm 5.0mm / 6.0mm
ICSD-38 ICSD-50
Countersink Drills
Drills of the company IDL Dental Technologies Ltd are manufactured from medical stainless steel and are heat treated, what essentially protects them against tear and wear.Drills are delivered with external cooling.
DRILLS
IDL DENTALTECHNOLOGIES LTD
laser marking
Color code
Drill dipping (mm)
46
SURGICAL KITS
IDL DENTALTECHNOLOGIES LTD
1. Ratchet standard 2. Ratchet hex for implant 2.423. Ratchet hex for abutments 1.254. Motor mount for implants 2.425. Motor mount for abutments 1.256. Handle key for abutments 1.25 7.7. Drill extender 8. Marking drill 1.99. Drills with external irrigation: 2.0 2.8 3.2 3.65 4.2 5.210. Plastic box
STANDARD PLASTIC IMPLANTOLOGY SET PROPERTIES:
ISSPS
1. Ratchet torque2. Ratchet hex for implant 2.423. Ratchet hex for abutments 1.254. Motor mount for implants 2.425. Motor mount for abutments 1.256. Handle key for abutments short/long 1.25 7. 7. Parallel pin short/long8. Drill extender 9. Marking drill 1.910. Drills with external irrigation: 2.0 2.5 2.8 3.2 3.65 4.2 11. Metal box
STANDARD METAL IMPLANTOLOGY SET PROPERTIES:
ISSMS
48
SURGICAL KITS
IDL DENTALTECHNOLOGIES LTD
1. Ratchet standard 2. Ratchet hex for implant 2.42 short/long3. Ratchet hex for abutments 1.25 short/long4. Motor mount for implants 2.42 short/long5. Motor mount for abutments 1.25 short/long6. Handle key for abutments 1.25 short/long 7.7. Parallel pin 2 pieces short, 2 pieces long8. Drill extender 9. Marking drill 1.910. Drills with external irrigation: 2.0 2.8 3.2 3.65 4.2 5.211. Countersink drills 3.8/4.2 5.0/6.0
FULL PLASTIC IMPLANTOLOGY SET PROPERTIES:
IFSPS
STOPPER DRILL EXTERNAL IRRIGATION KIT 30 PIECES:
0 2.0
0 2.8
0 3.2
0 3.65
0 4.0
0 4.5
6 8 10 11.5 13
6 8 10 11.5 13
6 8 10 11.5 13
6 8 10 11.5 13
6 8 10 11.5 13
6 8 10 11.5 13
ISSDK
50