Post on 08-Jul-2018
8/19/2019 A319, A320, A321 ATA 00 Documentation e
1/114
Book No: A320 00 DOCUMENT.
Lufthansa
Lufthansa Base
Issue: July 2001
For Training Purposes Only
Lufthansa 1995
Technical Training GmbH
Training ManualA 319/320/321
ATA 00
DocumentationDocumentation Presentation
8/19/2019 A319, A320, A321 ATA 00 Documentation e
2/114
For training purposes and internal use only.
Copyright by Lufthansa Technical Training GmbH.
All rights reserved. No parts of this trainingmanual may be sold or reproduced in any formwithout permission of:
Lufthansa Technical Training GmbH
Lufthansa Base Frankfurt
D-60546 Frankfurt/Main
Tel. +49 69 / 696 41 78
Fax +49 69 / 696 63 84
Lufthansa Base Hamburg
Weg beim Jäger 193
D-22335 Hamburg
Tel. +49 40 / 5070 24 13
Fax +49 40 / 5070 47 46
8/19/2019 A319, A320, A321 ATA 00 Documentation e
3/114
TABLE OF CONTENTS
Page i
ATA 00 AIRBUS DOCUMENTATION 1. . . . . . . . . . .
GENERAL 2
INTRODUCTION 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ATA 100 SPECIFICATION 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FUNCTIONAL ITEM NUMBER (FIN) 6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
CUSTOMIZATION 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REVISION 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MEDIA 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DOCUMENTATION LISTS 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLIGHT OPERATIONS DOCUMENTATION 18. . . . . . . . . . . . . . . . . . . . . . . .
CABIN ATTENDANT OPERATING MANUAL (CAOM) 18. . . . . . . . . . . . .
FLIGHT CREW OPERATING MANUAL (FCOM) 20. . . . . . . . . . . . . . . . .
FLIGHT MANUAL (FM) 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MASTER MINIMUM EQUIPMENT LIST (MMEL) 24. . . . . . . . . . . . . . . . .WEIGHT AND BALANCE MANUAL (WBM) 26. . . . . . . . . . . . . . . . . . . . . .
COMMONLY USED MAINTENANCE DOCUMENTATION 28. . . . . . . . . . . .
AIRCRAFT MAINTENANCE MANUAL (AMM) 28. . . . . . . . . . . . . . . . . . . .
ILLUSTRATED PARTS CATALOG (IPC)POWER PLANTILLUSTRATED PARTS CATALOG (PPIPC) 30. . . . . . . . . . . . . . . . . . . . . .
ADDITIONAL CROSS REFERENCE TABLES (ACRT) 30. . . . . . . . . . . .
MAINTENANCE PLANNING DOCUMENT (MPD) 32. . . . . . . . . . . . . . . .
STRUCTURAL REPAIR MANUAL 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(ILLUSTRATED) TOOL AND EQUIPMENT MANUAL (TEM) 36. . . . . . .
TROUBLE SHOOTING MANUAL (TSM) 38. . . . . . . . . . . . . . . . . . . . . . . .
WIRING DIAGRAM MANUAL (WDM) 40. . . . . . . . . . . . . . . . . . . . . . . . . . .
AIRCRAFT DOCUMENTATION RETRIEVAL SYSTEM (ADRES) 42. . .COMPUTER ASSISTED AIRCRAFT TROUBLE SHOOTING(CAATS) 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LESS OFTEN USED MAINTENANCE DOCUMENTATION 46. . . . . . . . . . .
APU BUILD-UP MANUAL (ABM) 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AIRPLANE CHARACTERISTICS AIRPORT PLANNING (AC) 46. . . . . .
AIRCRAFT RECOVERY MANUAL (ARM) 47. . . . . . . . . . . . . . . . . . . . . . .
CARGO LOADING SYSTEM MANUAL (CLS) 47. . . . . . . . . . . . . . . . . . . .
CONSUMABLE MATERIAL LIST (CML) 48. . . . . . . . . . . . . . . . . . . . . . . . .
DUCT REPAIR MANUAL (DRM) 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ECAM SYSTEM LOGIC BOOK (ESLB) 49. . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE FACILITY PLANNING (MFP) 49. . . . . . . . . . . . . . . . . . .
NON-DESTRUCTIVE TESTING MANUAL (NTM) 50. . . . . . . . . . . . . . . . .POWER PLANT BUILD-UP MANUAL (PPBM) 50. . . . . . . . . . . . . . . . . . .
SUPPORT EQUIPMENT SUMMARY (SES) 51. . . . . . . . . . . . . . . . . . . . .
STANDARDS MANUAL (SM) 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MISCELLANEOUS DOCUMENTATION 54. . . . . . . . . . . . . . . . . . . . . . . . . . . .
ALL OPERATOR TELEX (AOT) 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATOR INFORMATION TELEX (OIT) 56. . . . . . . . . . . . . . . . . . . . . .
OPERATIONS ENGINEERING BULLETIN (OEB) 57. . . . . . . . . . . . . . . .
SERVICE BULLETIN (SB) 58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SERVICE INFORMATION LETTER (SIL) 60. . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL FOLLOW-UP (TFU) 62. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL PUBLICATIONS COMBINED INDEX (TPCI) 64. . . . . . . . .DOCUMENTATION MANAGEMENT 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EFFECTIVITY 66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ATA 100 - BREAKDOWN 72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AMTOSS 74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LINK BETWEEN MANUALS 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DOCUMENTATION ASSOCIATION 90. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCHEDULED AND NON-SCHEDULED MAINTENANCEDOCUMENTATION 92. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOW TO USE ADRES / IPC 94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOW TO USE CAATS 104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8/19/2019 A319, A320, A321 ATA 00 Documentation e
4/114
8/19/2019 A319, A320, A321 ATA 00 Documentation e
5/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATION A319/A320/A321
00-00
FRA US/T WeG 09.07.2001
ATA 00 AIRBUS DOCUMENTATION
Page 1
8/19/2019 A319, A320, A321 ATA 00 Documentation e
6/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
GENERAL
INTRODUCTION
Purpose of this courseThe purpose of this course ist to familiarize maintenance personnel with thedocumentation used (directly or indirectly) for line and base maintenance.
NOTE: ONLY THE DOCUMENTATION RELATED TO THE COURSE OB-JECTIVES (MAINTENANCE AND TROUBLESHOOTING) WILL BEDESCRIBED IN DETAIL.
Page 2
8/19/2019 A319, A320, A321 ATA 00 Documentation e
7/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
The Documentation ....
- consists of manuals and documentation used by :
Flight Operations
Line and base maintenance
Shop and overhaul maintenance
Engineering
- provides information :
to operate
to maintain
the aircraft in optimum condition
Page 3
8/19/2019 A319, A320, A321 ATA 00 Documentation e
8/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
ATA 100 SPECIFICATION
General
The aim of the ATA 100 specification is to standardize the format and data or-ganization of each aircraft manufacturers manuals and also between manuals.
The use of standards minimizes cost and effort by the operator‘s personnel.
In accordance to that fact, many AIRBUS INDUSTRIE manuals and docu-ments follow the ATA 100 specification.
Documentation which follow the ATA 100 format: – AMM (Aircraft Maintenance Manual) – IPC (Illustrated Parts Catalog) – SRM (Structural Repair Manual) – WDM (Wiring Diagram Manual)
– ASM (Aircraft Schematic Manual) – AWM (Aircraft Wiring Manual) – AWL (Aircraft Wiring List) – CMM (Component Maintenance Manual) – ...
Page 4
8/19/2019 A319, A320, A321 ATA 00 Documentation e
9/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 5
Figure 1 ATA 100 Specification
8/19/2019 A319, A320, A321 ATA 00 Documentation e
10/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
6FRA US/T WeG 05.07.2001
FUNCTIONAL ITEM NUMBER (FIN)
Description
Equipment on Airbus Industrie aircraft is identified with what is known as aFUNCTIONAL ITEM NUMBER (FIN) which is not an ATA 100 specification re-quirement.
Used in numerous manuals, it facilitates quick location and identification ofequipment, circuits and systems.
Page 6
8/19/2019 A319, A320, A321 ATA 00 Documentation e
11/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
7FRA US/T WeG 05.07.2001 Page 7
Figure 2 FIN - Electrical and Electronic Systems
8/19/2019 A319, A320, A321 ATA 00 Documentation e
12/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
8FRA US/T WeG 05.07.2001 Page 8
Figure 3 FIN - Mechanical Systems
8/19/2019 A319, A320, A321 ATA 00 Documentation e
13/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
9FRA US/T WeG 05.07.2001 Page 9
Figure 4 FIN - Identification of Systems
8/19/2019 A319, A320, A321 ATA 00 Documentation e
14/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
10FRA US/T WeG 05.07.2001 Page 10
Figure 5 FIN - Identification of Equipment (1)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
15/114
L u
f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
11FRA US/T WeG 05.07.2001 Page 11
Figure 6 FIN - Identification of Equipment (2)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
16/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
12FRA US/T WeG 05.07.2001 Page 12
Figure 7 FIN - Labels
8/19/2019 A319, A320, A321 ATA 00 Documentation e
17/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
13FRA US/T WeG 05.07.2001 Page 13
Figure 8 FIN - Racks, Boxes and Panels
8/19/2019 A319, A320, A321 ATA 00 Documentation e
18/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
CUSTOMIZATION
Description
The Technical Documentation consists ofcustomized manuals and non-customized manuals:
a customized manual:
contains only the information applicable to a particular airline or a group ofoperators.
a non-customized manual
contains information applicable to all airlines for one aircraft type.
A non-customized manual is called GENERIC if the information is applicapleto all aircraft models / types / series. (I.e.: all AIRBUS types)
A non-customized manual is called ENVELOPE when the information is ap-plicaple to only one specific aircraft model / type / serie. (I.e.: A320 only)
REVISION
Description
There are two types of revisions: normal and temporary
normal revisions are calendar scheduled
Temporary revisions are used for urgent information requiring immediateattention or advanced notification.They are on yellow pages or on yellow diskettes.
Page 14
8/19/2019 A319, A320, A321 ATA 00 Documentation e
19/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
MEDIAThe Airbus Industrie Technical Publications are provided on different media, as applicable
Page 15
Figure 9 Media
8/19/2019 A319, A320, A321 ATA 00 Documentation e
20/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
DOCUMENTATION LISTS
Flight Operation
Designation Abbreviation Media Type Format Revision
Cabin Attendant Operating Manual CAOM Paper Customized AIRBUS SPEC. As required
Flight Crew Operating Manual FCOM Paper Customized AIRBUS SPEC. As required
Flight Manual FM Paper Customized AIRBUS SPEC. As required
(Master) Minimum Equipment List (M)MEL Paper Customized AIRBUS SPEC. As required
Weight and Balance Manual WBM Paper Customized ATA 100 As required
Commonly used in Maintenance
Designation Abbreviation Media Type Format Revision
Aircraft Maintenance Manual AMM Paper / MicrofilmDigital Data / CD-Rom
Customized ATA 100 Every 3 months
Illustrated Parts Catalog
Power Plant Illustrated Parts Catalog
IPC
PPIPC
Paper / Microfilm
Digital Data / CD-Rom
Customized ATA 100 Every 3 months
Additional Cross Reference Table ACRT Microfilm Envelope ATA 100 Every 3 months
Maintenance Planning Document MPD Paper Envelope ATA 100 Every 6 months
Structural Repair Manual SRM Paper / Microfilm Envelope ATA 100 Every 3 months
(Illustrated) Tool and Equipment Manual TEM Paper / Digital Data Envelope ATA 100 Every 3 months
Trouble Shooting Manual TSM Paper / Microfilm
Digital Data / CD-Rom
Customized AIRBUS SPEC. Every 3 months
Wiring Diagram Manual
Aircraft Schematic Manual
Aircraft Wiring Manual
Aircraft Wiring List
WDM
ASM
AWM
AWL
Paper / Microfilm
Paper / Microfilm
Paper / Microfilm
Customized
Customized
Customized
ATA 100
ATA 100
ATA 100
Every 3 months
Every 3 months
Every 3 months
Page 16
8/19/2019 A319, A320, A321 ATA 00 Documentation e
21/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONGENERAL
A319/A320/A321
00-00
FRA US/T JG 01.03.01
Less often used in Maintenance
Designation Abbreviation Media Type Format Revision
APU Build Up Manual ABM Paper Spec. Model AIRBUS SPEC. As required
Airplane Characteristics AC Paper Envelope AIRBUS SPEC. As required
Aircraft Recovery Manual ARM Paper Envelope ATA 100 As required
Cargo Loading System Manual CLS Paper Envelope orCustomized
AIRBUS SPEC. As required
Consumable Material List CML Paper Generic ATA 100 Every 6 months
Component Maintenance Manual CMM Paper / Microfilm Envelope ATA 100 Every 3 months
Duct Repair Manual DRM Paper Envelope ATA 100. Every 3 months
ECAM SYSTEM Logic Book ESLB Paper Envelope AIRBUS SPEC. As required
Maintenance Facility Planning MFB Paper Envelope AIRBUS SPEC. As requiredNon Destructive Testing Manual NTM Paper Envelope ATA 100 Every 3 months
Power Plant Build Up Manual PBM Paper Customized ATA 100 As required
Support Equipment Summary SES Paper Generic AIRBUS SPEC. Every 3 months
Standards Manual SM Microfilm Generic AIRBUS SPEC. Every 3 months
MIscellaneous
Designation Abbreviation Media Type Format Revision
All Operator Telex AOT Paper / CD-Rom Envelope AIRBUS SPEC. As required
Operator Information Telex OIT Paper / CD-Rom Envelope AIRBUS SPEC. As required
Operations Engineering Bulletin OEB Paper Customized AIRBUS SPEC. As required
Service Bulletin SB Paper Customized ATA 100 As required
Service Information Letter SIL Paper / Disc Envelope ATA 100 As required
Technical Follow-Up TFU Paper / CD-Rom Envelope AIRBUS SPEC. monthly
Page 17
8/19/2019 A319, A320, A321 ATA 00 Documentation e
22/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
FLIGHT OPERATIONS DOCUMENTATION
CABIN ATTENDANT OPERATING MANUAL (CAOM)
Description
The CAOM provides descriptive information of the aircraft and operating in-structions for normal, abnormal and emergency procedures for the equipmentcontrolled by the flight attendants.
Page 18
8/19/2019 A319, A320, A321 ATA 00 Documentation e
23/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 19
Figure 10 Cabin Attendant Operating Manual
8/19/2019 A319, A320, A321 ATA 00 Documentation e
24/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
FLIGHT CREW OPERATING MANUAL (FCOM)
Description
The FCOM consists of 4 volumes, covering system descriptions, flight prepara-
tion, flight operations and flight management.
Volume 3 includes operations engineering bulletins (OEB), issued as the needarises to advise operators of revised or new, but significant, technical and pro-cedural information between normal revisions of the manual.
It is normally the consequence of a detected defect or abnormal behaviour ofthe aircraft or of its systems.
Page 20
8/19/2019 A319, A320, A321 ATA 00 Documentation e
25/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 21
Figure 11 Flight Crew Operating Manual
8/19/2019 A319, A320, A321 ATA 00 Documentation e
26/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
FLIGHT MANUAL (FM)
Description
The FM covers aircraft operating limitations, emergency and standard operat-
ing procedures, performance and supplements, including the ConfigurationDeviation List (CDL), abnormal operations and regulatory differences.
It also includes CAT2/CAT3 landing capability equipment lists and require-ments.
NOTE: THE FM IS APPROVED BY THE AIRWORTHINESS AUTHORITIES.
Page 22
8/19/2019 A319, A320, A321 ATA 00 Documentation e
27/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 23
Figure 12 Flight Manual (Cover)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
28/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O
n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
MASTER MINIMUM EQUIPMENT LIST (MMEL)
Description
The MMEL provides the necessary information to operators for definition of
their Minimum Equipment List (MEL).
The MMEL specifies the components or systems which may be inoperative andthe associated operational or special procedures which allow the aircraft to becleared for flight.
The MMEL refers the user to the Aircraft Maintenance Manual (AMM) for themanitenance procedures.
NOTE: THIS DOCUMENT IS APPROVED BY THE AIRWORTHINESS AU-THORITIES.
Page 24
8/19/2019 A319, A320, A321 ATA 00 Documentation e
29/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 25
Figure 13 Master Minimum Equipment List
8/19/2019 A319, A320, A321 ATA 00 Documentation e
30/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
WEIGHT AND BALANCE MANUAL (WBM)
Description
The WBM contains the specific aircraft general data, the weight and balance
limitations and detailed information relative to the aircraft loading capabilities.
The WBM contains the aircraft delivery weighing report and the weighingcheck-list.
Page 26
8/19/2019 A319, A320, A321 ATA 00 Documentation e
31/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONFLIGHT OPERATIONS DOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 27
Figure 14 Weight and Balance Manual
8/19/2019 A319, A320, A321 ATA 00 Documentation e
32/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
COMMONLY USED MAINTENANCE DOCUMENTATION
AIRCRAFT MAINTENANCE MANUAL (AMM)
Description
The Aircraft Maintenace Manual provides information to enable maintenancepersonnel to properly service, repair, replace, adjust, inspect and check equip-ment and systems of the aircraft, normally performed on the ramp or in themaintenance hangar.
The AMM contains information about inspection and maintenance of aircraftstructure (except repair).
The AMM also contains the necessary data to cover scheduled maintenanceprocedures prescribed by the Maintenance Review Board (MRB) report, the
Master Minimum Equipment List (MMEL) and the Configuration Deviation List(CDL).
NOTE: THE TIME LIMITS AND MAINTENANCE CHECKS CHAPTER ISAPPROVED BY THE AIRWORTHINESS AUTHORITIES.
Page 28
8/19/2019 A319, A320, A321 ATA 00 Documentation e
33/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 29
Figure 15 Aircraft Maintenance Manual (Cover)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
34/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
ILLUSTRATED PARTS CATALOG (IPC)POWER PLANT ILLUSTRATED PARTS CATALOG (PPIPC)
Description
The IPC identifies and illustrates all line replaceable parts and units of the air-craft, excluding power plant/nacelle, which are separately covered by thePower Plant Illustrated Parts Catalog (PPIPC).
The IPC/PPIPC is a companion document to the AMM, as it contains informa-tion on all the parts for which maintenance practices are provided includingcomponents and replaceable parts or items of the component.
It provides information such as part numbers, location etc. For all individualLRU’s such as bulbs, sockets seals, bearing, screws relays etc and/or partswhere maintenance practices allow replacement of the components or parts,rather than replacement of the next higher assembly.
ADDITIONAL CROSS REFERENCE TABLES (ACRT)
Description
The Additional Cross Reference Tables (ACRT) is part of the IPC.
The ACRT provides optional part numbers, Functional Item Numbers to PartNumbers, local manufacturer, fuses and lamps data.
Page 30
8/19/2019 A319, A320, A321 ATA 00 Documentation e
35/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 31
Figure 16 Illustrated Parts Catalog
8/19/2019 A319, A320, A321 ATA 00 Documentation e
36/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
MAINTENANCE PLANNING DOCUMENT (MPD)
Description
The MPD includes all mandatory and recommended procedures, maintenance
tests and servicing to be carried out on the aircraft at approved intervals.
The Maintenance Review Board Report (MRBR) is used as a basis for approval.The MPD provides the operator with the data needed to develop or modify ascheduled maintenance program.
The A319/A320/A321 Maint. Plan. Document compromises two volumes:
Volume 1:
Contains the AIRBUS INDUSTRIE recommended maintenace program ef-fective for A319, A320 and A321 aircraft models.
Initially based on the Maintenance Review Board Report (MRBR), it is kept
updated by the additions/amendments of tasks and/or intervals arising from:- New effectiveness assessment
- In service experience
- Development in technical status of A319, A320 and A321 models.
It provides airlines with planning information for establishing their own main-tenance program.
Volume 2:
Contains additional information supporting and illustrating theA319/A320/A321 maintenance program.
NOTE: THE MPD IS APPROVED BY THE AIRWORTHINESS AUTHORITIESFOR AN AIRCRAFT TYPE.
Page 32
8/19/2019 A319, A320, A321 ATA 00 Documentation e
37/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 33
Figure 17 Maintenance Planning Document (Cover)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
38/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
STRUCTURAL REPAIR MANUAL
Description
The SRM contains descriptive information for identification and repair of the
aircraft primary and secondary structure.(Power Plant excluded, for which is a nacelle SRM).
The SRM includes an alphanumerical index list (SRM-NI), with all part numbersand corresponding ATA references, figures, configuration and item numbers.
NOTE: THIS DOCUMENT IS APPROVED BY THE AIRWORTHINESS AU-THORITIES.
Page 34
8/19/2019 A319, A320, A321 ATA 00 Documentation e
39/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 35
Figure 18 Structural Repair Manual
8/19/2019 A319, A320, A321 ATA 00 Documentation e
40/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
(ILLUSTRATED) TOOL AND EQUIPMENT MANUAL (TEM)
Description
The TEM provides information about specific ground support equipment/tools
required for the accomplishment of maintenance tasks such as servicing, faultisolation, testing and repair of airframe, engine, components and accessories.
It also provides information for special tools and equipment required for air-frame and engine overhaul. The TEM does not include standard airport equip-ment or standard tools.
Page 36
8/19/2019 A319, A320, A321 ATA 00 Documentation e
41/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 37
Figure 19 Illustrated Tool and Equipment Manual (Cover)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
42/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
TROUBLE SHOOTING MANUAL (TSM)
Description
The TSM provides comprehensive and systematic procedural coverage of air-
craft warnings (ECAM, EFIS, LOCAL), malfunction reports (crew, maintenance)and CFDS messages to identify, confirm, isolate and repair aircraft malfunc-tions.
IT is designed to provide a quick and accurate means of isolating faults andgives recommendations for actions to be taken in order to reduce aircraft downtime.
Page 38
8/19/2019 A319, A320, A321 ATA 00 Documentation e
43/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 39
Figure 20 Trouble Shooting Manual (Cover)
g
8/19/2019 A319, A320, A321 ATA 00 Documentation e
44/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
WIRING DIAGRAM MANUAL (WDM)
Description
The WDM consists of three manuals:
The Aircraft Schematic Manual (ASM)
The Aircraft Wiring Manual (AWM)
The Aircraft Wiring List (AWL)
The WDM provides the electrical circuit information for service maintenance,troubleshooting and repair ofn the aircraft electrical systems.
The ASM uses block diagrams and functional schematics to describe the air-craft electrical and electronic systems.
The AWM provides detailed diagram information on the aircraft electrical and
electronic wiring connections.
The AWL lists all electrical and electronic wiring connections, provides relatedmaintenance data and includes the equipment list.
Page 40
g
8/19/2019 A319, A320, A321 ATA 00 Documentation e
45/114
L
u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 41
Figure 21 Wiring Diagram Manual (Cover)
g
8/19/2019 A319, A320, A321 ATA 00 Documentation e
46/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
AIRCRAFT DOCUMENTATION RETRIEVAL SYSTEM (ADRES)
Description
ADRES allows the retrieval of the AMM and the IPC on a stand alone PCthrough 3 CD-Roms.
Physical Benefits:
Compact size of the medium.
High storage capacity (approximately 220.000 pages in 3 CD-Roms).
No time consumable updating of paper
Multiple access paths at information, thus reducing Aircraft turn aroundtimes.
Higher Quality of printing and more practical than roll film.
ADRES objectives:
Reduce look-up time.
Multiple access to data.
Reduce revision time and cost.
Reduce size and storage.
Revision: every 3 months.
THIS OR this
Page 42
gOC O
8/19/2019 A319, A320, A321 ATA 00 Documentation e
47/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCEDOCUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 43
Figure 22 Aircraft Documentation Retrieval System (ADRES)
gDOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
48/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCE DOCU-MENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
COMPUTER ASSISTED AIRCRAFT TROUBLE SHOOTING(CAATS)
Description
CAATS is a software tool on one CD-Rom that allows the retrieval of the TSMand the AMM associated tasks – It also includes IPC data and the other Airbustechnical data.
CAATS objectives:
To bring on-board the aircraft information needed for trouble shooting.
To assist technicians in finding trouble shooting procedures.
To limit the number of manuals for trouble shooting
To improve access time to relevant information, compared with paper.
To provide the right information at the right time.
Designed to be used on a portable PC on-board an aircraft.
Page 44
gDOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
49/114
L u f t h a n s a T e c h n i c a l T r a i n i n g
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONCOMMONLY USED MAINTENANCE DOCU-MENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 45
Figure 23 Computer Assisted Aircraft Trouble Shooting
gDOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
50/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
LESS OFTEN USED MAINTENANCE DOCUMENTATION
APU BUILD-UP MANUAL (ABM)
The ABM describes the procedure to build-up the Auxiliary Power Unit (APU),as delivered to a „ready to install“ state to AIRBUS INDUSTRIE aircraft.This Manual is specific to each APU Model.
AIRPLANE CHARACTERISTICS AIRPORT PLANNING (AC)
The AC defines the aircraft characteristics for general airport planning requiredby the airlines, the airport authorities and consultant.
Page 46
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
51/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
AIRCRAFT RECOVERY MANUAL (ARM)
The ARM provides information for planning and conducting recovery opera-tions. It describes equipment and tooling requirements, procedures for lifting,shoring and moving disabled aircraft.The ARM is aimed at airlines, airport authorities and emergency units, involved
in recovery operations.
CARGO LOADING SYSTEM MANUAL (CLS)
The CLS is an operational manual providing additional information and instruc-tions to the operators of the cargo loading systems.The AMM covers cargo loading system maintenance; the CLS manual specifi-cally addresses operating instructions.
Page 47
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
52/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
CONSUMABLE MATERIAL LIST (CML)
The CML details the characteristics and gives procurement sources of consum-able materials such as grease, oil, hydraulic fluid, etc.
DUCT REPAIR MANUAL (DRM)
The DRM contains all the data necessary to locate, identify and repair and/orreplace sub-assemblies or parts of metallic ducts. It also contains the tests tobe conducted after the repairs.
Page 48
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
53/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
ECAM SYSTEM LOGIC BOOK (ESLB)
The ESLB contains the data used to generate the output messages and/orgraphics shown on the ECAM display units.
MAINTENANCE FACILITY PLANNING (MFP)
The MFP brings together, in one volume, information on aircraft dimensions,weights and other pertinent data for long term planning of ground handling,ramp servicing, line maintenance, repair, overhaul and functional testing forstructure and system components.
Page 49
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
54/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
NON-DESTRUCTIVE TESTING MANUAL (NTM)
The NTM contains descriptive information and specific instructions for non-de-structive testing of primary and secondary aircraft structure (power plant ex-cluded).The power plant and component non-destructive testing information is provided
by separate NDT manuals for each component. If the required tests are notextensive, they can be found in a specific page block of the CMM.
POWER PLANT BUILD-UP MANUAL (PPBM)
The PPBM provides instructions for the installation of a quick engine change kiton a bare engine.
Page 50
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
55/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
SUPPORT EQUIPMENT SUMMARY (SES)
The SES provides the operator with information on support equipment andtools for aircraft servicing, maintenance and repairs.
The SES also provides information on equipment for shop level system mainte-
nance and component overhaul.
Page 51
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
56/114
L u f t h a n s a T e c h n i c a l T r a i n i n
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01
STANDARDS MANUAL (SM)
Description
The SM provides information of design and product standards, established and
approved by the aircraft manufacturer.
The SM also contains a list of qualified suppliers, proprietary parts and inter-changeable standards.
Standards manual supplement 1 (SM-S1) is a cross reference list for alterna-tive fasteners that can be used in place of the original used in manufacturing orthe ones referenced in AIRBUS INDUSTRIE repair instructions, structural re-pair manual or service bulletins.
Standards manual supplement 2 (SM-S2) North America is an optional suppli-ers list. The purpose of the SM-S2 is to assist Airlines who prefer to purchasetheir standard parts in the USA or Canada.
Standards manual - Part 3 references the original standard part number withthe vendor part number and the supplier CAGE/NATO code.
Page 52
n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
57/114
L u f t h a n s a T e c h n i c a l T r a i n i
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATIONLESS OFTEN USED MAINTENANCE DO-CUMENTATION
A319/A320/A321
00-00
FRA US/T JG 01.03.01 Page 53
Figure 24 Standards Manual (Cover)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
58/114
i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
59/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
OCU OMISCELLANEOUS DOCUMENTATION
3 9/ 3 0/ 3
00-00
FRA US/T JG 01.03.01 Page 55
Figure 25 All Operator Telex
i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
60/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
OPERATOR INFORMATION TELEX (OIT)
Description
The OIT is used to provide information on a significant in-service event which
does not result in a requirement for an urgent action by the other operator;or general information about maintenance operations, where AIRBUS INDUS-TRIE has identified a requirement to quickly notify the operators.
Page 56
n i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
61/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
OPERATIONS ENGINEERING BULLETIN (OEB)
Description
The OEB is used to advise operators of revised or new significant technical
information, flight crew procedures or limitations, required for safe flight opera-tion.
There are two categories of OEBs distinguished by a color code:
White paper is used for normal OEBs.
Orange paper is used for what is called „the red OEB“, issued to highlightsignificant impact or safe aircraft operation.
The OEB is not airworthiness approved. It is issued on a temporary basis andwill be cancelled by the application of a modification/service bulletin.
Page 57
n i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
62/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
SERVICE BULLETIN (SB)
Description
The Service Bulletin is a document used to notify the operators of modifica-
tions, component substitutions, special inspections or checks to be done ontheir aircraft for safe operation.
A Service Bulletin summary is sent to all operators to inform them about theservice bulletin itself.
A Service Bulletin can be ...
mandatory
recommended
desirable or optional
NOTE: THE SB IS APPROVED BY THE AIRWORTHINESS AUTHORITIES.
Page 58
n i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
63/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01 Page 59
Figure 26 Service Bulletin (Example)
n i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
64/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
SERVICE INFORMATION LETTER (SIL)
Description
The SIL is used to provide technical information of a non-urgent character:
To highlight information already incorporated, or scheduled to be incorpo-rated in technical publications.
Information related to product improvement, maintenance and/or operationalpractices.
Information on general issues or policies.
The Service Information Letter is strictly used for installation and does not callfor physical tasks to be performed on the aircraft.
Page 60
n i n g
DOCUMENTATION A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
65/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
THIS PAGE INTENTIONALLY LEFT BLANK
Page 61
n i n g
DOCUMENTATIONSC O S DOC O
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
66/114
L u f t h a n s a T e c h n i c a l T r a i n
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
TECHNICAL FOLLOW-UP (TFU)
Description
The Technical Follow-up is used to provide operators, on regular basis, with
comprehensive information on technical product improvements, including sta-tus and availability follow-up.
A separate TFU is allocated to technical issues identified during flight test orin-service operation covering safety, malfunctions reported several times andmaintenance difficulties.
The Technical Follow-up is an engineering oriented one-page synthesis docu-ment with monthly updates.
NOTE: THE TFU IS NOT APPROVED BY THE AIRWORTHINESS AU-THORITIES.
The Status of a TFU can be as follws:
TFU open
The engineering investigations is in progress
TFU pending
The technical solution is fully identified.Drawings and documents are beingprepared.
TFU closed
All Documents (service bulletins, revisions to technical publications) are re-leased to the operator or the issue is identified as „no further action“.
TFU in abeyanceThere is no more engineering activity taking place. The issue is of minorconsequence and does not require a modification. It is not processed furtheruntil the modification is bought by an operator or can be introduced in a fu-ture standard.
Page 62
n i n g
DOCUMENTATIONMISCELLANEOUS DOCUMENTATION
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
67/114
L u f t h a n s a T e c h n i c a l T r a i
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01 Page 63
Figure 27 Technical Follow-up
n i n g
DOCUMENTATIONMISCELLANEOUS DOCUMENTATION
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
68/114
L u f t h a n s a T e c h n i c a l T r a i
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01
TECHNICAL PUBLICATIONS COMBINED INDEX (TPCI)
Description
The TPCI is an electronic index of all Airbus available publications for easy ref-erence and cross reference.
It enables consultations of a single data bank containing the complete indexinformation and cross references between the listed documents:
Modification (MOD)
Modification Proposal (MP)
Service Bulletin (SB)
Vendor Service Bulletin (VSB)
Service Information Letter (SIL)
Technical Follow-up (TFU)
All Operators Telex (AOT)
Operators Information Telex (OIT) Flight Operators Telex (FOT)
Operations Engineering Bulletin (OEB)
Airworthiness Directive (AD)
Consigne de Navigabilite (CN, the french AD)
TPCI objectives:
Airline efficiency
A unique digital format data source
Time and cost saving through quick and easy access
Paper less maintenance documentation
NOTE: REVISION MONTHLY
Page 64
i n i n g
DOCUMENTATIONMISCELLANEOUS DOCUMENTATION
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
69/114
L u f t h a n s a T e c h n i c a l T r a i
F o r T r a i n i n g P u r p o s e s
O n l y
MISCELLANEOUS DOCUMENTATION00-00
FRA US/T JG 01.03.01 Page 65
Figure 28 Technical Publications Combined Index
i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
70/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s
O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01
DOCUMENTATION MANAGEMENT
EFFECTIVITY
Page 66
Figure 29 Effectivity (1)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
71/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01 Page 67
Figure 30 Effectivity (2)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
72/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01 Page 68
Figure 31 Effectivity (3)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
73/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01 Page 69
Figure 32 Effectivity (4)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
74/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01 Page 70
Figure 33 Effectivity (5)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
75/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 19.03.01 Page 71
Figure 34 Effectivity (6)
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
76/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 20.03.01
ATA 100 - BREAKDOWN
Description
The Ata 100 numbering system uses a six digit dash number breakdown, whichdivides the documented material into chapter (system), section (subsystem)
and subject (unit).
Page Block - Breakdown
Page block numbers are used to separate the subjects within manual chaptersinto topics for easy reference.A Page Block (PB) is related to a specific type of information.The „Page Block“ system applies to the
AMM
CMM
SRM
TSM
AMM Page Block breakdown
PB 001 Description and operation
PB 201 Maintenance Practices (ie: pressurizing, jacking energ. etc.)
PB 301 Servicing (ie: replenishment, lubricating etc.)PB 401 Removal/Installation - Deactivation/Reactivation
PB 501 Adjustment/Test
PB 601 Inspection/Check
PB 701 Cleaning/Painting
PB 801 Approved Repairs
TSM Page Block breakdown
PB 101 Fault symptoms
PB 201 Fault isolation proceduresPB 301 Task supporting data
SRM Page Block breakdown
PB 001 Identification
PB 101 Allowable Damage
PB 201 Repairs
Page 72
a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
77/114
L u f t h a n s a T e c h n i c a l T r a
F o r T r a i n i n g P u r p o s e s O n l y
DOCUMENTATION MANAGEMENT00-00
FRA US/T JG 20.03.01 Page 73
Figure 35 ATA 100 Breakdown - Example
r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
78/114
L u f t h a n s a T e c h n i c a l T r
F o r T r a i n i n g P u r p o s e s O n l y
OCU O G00-00
FRA US/T JG 20.03.01
AMTOSS
Description
AMM and TSM maintenance procedures are prepared in accordance with AM-
TOSS (Aircraft Maintenance Task orientated Support System).It is a logical approach to organize maintenance Tasks and Subtasks.
AMTOSS consists of 2 parts:
The Aircraft Maintenance Manual and the Trouble Shooting Manual
- Organized in Tasks and Subtasks
- Using a unique numbering system
The Production Management Data Base (PMDB):
- Providing maintenance planning data for each Task and Subtask pub-lished in the AMM/TSM
Page 74
r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
79/114
L u f t h a n s a T e c h n i c a l T r
F o r T r a i n i n g P u r p o s e s O n l y
00-00
FRA US/T JG 20.03.01 Page 75
Figure 36 AMTOSS (1)
r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
80/114
L u f t h a n s a T e c h n i c a l T r
F o r T r a i n i n g P u r p o s e s O n l y
00-00
FRA US/T JG 20.03.01 Page 76
Figure 37 AMTOSS (2)
r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
81/114
L u f t h a n s a T e c h n i c a l T r
F o r T r a i n i n g P u r p o s e s O n l y
00-00
FRA US/T JG 20.03.01 Page 77
Figure 38 AMTOSS (3)
Tr a
i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
82/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01
LINK BETWEEN MANUALS
Page 78
Figure 39 Link Between Manuals (1)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
8/19/2019 A319, A320, A321 ATA 00 Documentation e
83/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 79
Figure 40 Link between Manuals (2)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
84/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 80
Figure 41 Link between Manuals (3)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
85/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 81
Figure 42 Link between Manuals (4)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
86/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 82
Figure 43 Link between Manuals (5)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
87/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 83
Figure 44 Link between Manuals (6)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
88/114
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
89/114
L u f t h a n s a T e c h n i c a l T
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 85
Figure 46 Link between Manuals (8)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00 00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
90/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 86
Figure 47 Link between Manuals (9)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
91/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 87
Figure 48 Link between Manuals (10)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
92/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00-00
FRA US/T JG 20.03.01 Page 88
Figure 49 Link between Manuals (11)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
93/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00 00
FRA US/T JG 20.03.01 Page 89
Figure 50 Link between Manuals (12)
T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
94/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00 00
FRA US/T JG 20.03.01
DOCUMENTATION ASSOCIATION
Page 90
Figure 51 Documentation Association (1)
l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
95/114
L u f t h a n s a T e c h n i c a l
F o r T r a i n i n g P u r p o s e
s O n l y
00 00
FRA US/T JG 20.03.01 Page 91
Figure 52 Documentation Association (2)
l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
96/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e
s O n l y
FRA US/T JG 20.03.01
SCHEDULED AND NON-SCHEDULED MAINTENANCE DOCUMENTATION
Scheduled Maintenance
Inspections
Planned Maintenance (hours/cycles/calendar)
Overhaul
Non-Scheduled Maintenance
Dispatch
Trouble Shooting
Repair
Page 92
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
97/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e
s O n l y
FRA US/T JG 20.03.01 Page 93
Figure 53 (Non)-Scheduled Maintenance Documentation
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
98/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e
s O n l y
FRA US/T JG 20.03.01
HOW TO USE ADRES / IPC
Page 94
Figure 54 How to use ADDRESS/IPC (1)
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
99/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e
s O n l y
FRA US/T JG 20.03.01 Page 95
Figure 55 How to use ADDRESS/IPC (2)
8/19/2019 A319, A320, A321 ATA 00 Documentation e
100/114
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
101/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 97
Figure 57 How to use ADDRESS/IPC (3)
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
102/114
L u f t h a n s a T e c h n i c a
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 98
Figure 58 How to use ADDRESS/IPC (4)
a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
103/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 99
Figure 59 How to use ADDRESS/IPC (5)
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
104/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 100
Figure 60 How to use ADDRESS/IPC (6)
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
105/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 101
Figure 61 How to use ADDRESS/IPC (7)
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
106/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 102
Figure 62 How to use ADDRESS/IPC (8)
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
107/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 103
Figure 63 How to use ADDRESS/IPC (9)
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
108/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01
HOW TO USE CAATS
COMPUTER ASSISTED AIRCRAFT TROUBLE SHOOTING (CAATS)
CAATS is a software tool on one CD-Rom that allows the retrieval of the TSMand the AMM associated tasks – It also includes IPC data and the other Airbus
technical data.
CAATS objectives:
To bring on-board the aircraft information needed for trouble shooting.
To assist technicians in finding trouble shooting procedures.
To limit the number of manuals for trouble shooting
To improve access time to relevant information, compared with paper.
To provide the right information at the right time.
Designed to be used on a portable PC on-board an aircraft.
Page 104
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
109/114
L u f t h a n s a T e c h n i c
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 105
Figure 64 Computer Assisted Aircraft Trouble Shooting
c a l T r a i n i n g
DOCUMENTATIONDOCUMENTATION MANAGEMENT
A319/A320/A321
00-00
8/19/2019 A319, A320, A321 ATA 00 Documentation e
110/114
L u f t h a n s a T e c h n i
F o r T r a i n i n g P u r p o s e s O n l y
FRA US/T JG 20.03.01 Page 106
Figure 65 How to use CAATS (1)
i c a �