Post on 18-Mar-2021
C
M
Y
CM
MY
CY
CMY
K
components.pdf 8/22/08 3:22:50 PM
Components
North American Manual
North American Manual About FSB
Designer Series
Lockset Program
Lever, Knob and Trim Designs
Sliding Door Hardware
Door Pulls and Glass Door Hardware
Accessories
Window Handles
Brass and Bronze Products
Door Closers
METRIC Bath Accessories
Components
Installation Instructions
Specialty Applications
Components
3
About FSB
New Products
Locks and Latches Overview
Lock and Latch Bodies Correlation Table to Sets
Lock and Latch Bodies Functions and Specifications
Series SM
Series NM
Series EM
Series HL
Series ML
Series KL
Series HD
Series MD
Series KD
Alignment Tools
Cylinders
Active Dummy Mortise Case
Fixed Dummy Mounts
Strikes
Spindles and Accessories
Screws
Numerical Index
4
5
6
7
8
15
18
20
22
26
28
30
32
34
34
37
38
40
43
47
48
About FSB
4
1881
FSB was established in 1881.Together with a modest work -force, company founder FranzSchneider produced antique-style brass cabinet fittings.
1920s
In the early 1920s, the first doorand window fittings appeared inthe FSB production program.The design of these years echoedthe modernism of the Bauhausera. Silver metal com po nentswere combined with black com-posite features.
1990s
Inspired by an international design workshop held in Brakelin 1986, FSB began engagingthe market with contemporarydesigns in an initiative dubbed“Tour d’Europe.” Throughoutthis initative FSB created designsuites with such renouned designers as Philippe Starck,Jasper Morrison, Richard Rogersand many others.
For the past two decades, FSBhas continued to work with Archi-tects and Designers to createhandles – each with their ownpersonality.
1950s
Beginning with in-house designerJohannes Potente in the 1950s,FSB created the first handleswhich exemplify minimalism,modernism and ergonomics. FSB is still known for the use ofthese design principles today.
Four of Potente’s lever de-signs have been included in thepermanent collection of the Mu-seum of Modern Art (MoMA).
2000s
FSB introduces a limited rangeof levers supplied in completelocksets to the Amercian designcommunity. The first catalogwas approximately 80 pages.Two later catalogs increasedFSB’s North American offeringto nearly 100 lever designs.
In 2007, FSB expanded theNorth American distributioncenter, moving it to Madison,CT, where the majority of prod-ucts are stocked in natural anodized aluminum and satinstainless steel. Stock items canbe shipped in 48 hours. All non-stock items can be shippedwithin two to eight weeks re-gardless of the product type,finish or project size.
This is FSB’s fourth edition forthe North American market. It represents a huge step fowardto offer a complete programwhich brings design consistencyacross more openings and ap-plications.
This catalog is seperated intodifferent sections, tailored toyour specific needs.
For the latest informationplease go to www.fsbna.com.
New Products
5
METRIC Bath Accessories
FSB has dedicated an entiresection to a well designed rangeof bathroom accessories in solidstainless steel. The design principle is based on a minimalrectangular post centered on asmall round escutcheon.
Sliding Door Hardware
Building owners are demandingmore efficient use of space.Consequently, architects and designers are utilizing manymore sliding and pocket doors.
In recognition of this trendFSB has developed an entirerange of flush mounted trim forpassage, privacy and entry applications. We demonstrateour penchant for divising aesthetically pleasing technicalsolutions by offering the mar-ket’s first flush pulls with springloaded covers, as picturedabove.
A complete overview of theseproducts is provided in the“Sliding Door Hardware” section.
Bronze
There is an increase in an “oldmeets new aesthetic” in whichdesigners are combining tradi-tional finishes with more mini-mal and modern design. Foryears, FSB has offered ten ofour best selling handles in solidbrass, either polished or oxidiz edto give them varying degrees ofantiquing to suit the designers’needs.
FSB now introduces Bronzeas a new material for our leverhandles and accessories. Thespecial appeal of bronze is thepatina that develops on its sur-face. In the course of daily use,polished bronze parts darkennaturally, becoming more distin-guished with time.
We have created a completesection titled “Brass and BronzeProducts” to cover all the pro ducts we offer in these two exceptional base materials. We offer eight bronze handles andten brass handles for projectsthat may benefit from this “oldmeets new” aesthetic. All brassand bronze products can be oxidized to varying degrees ofdarkness, depending on “themood” a designer would like tocreate.
Glass Door Hardware
Creating more open spaces has become a cornerstone ofmodern architecture. Utilizinglarge pieces of glass, whetherfor windows, doors, or walls, facilitates this objective.
FSB has broadened its glassdoor program to include locksand hinges for swinging glassdoors as well as exposed rollinggears for sliding glass doors.These products can be found inthe section “Door Pulls andGlass Door Hardware”.
North American Components
6
FSB offers an entire range ofmortise locks and tubular latchesto be used in either commercial,residential or specialty applica-tions. Both technologies can beused with over 80 standard FSBlever and doorknob designs.
Mortise Locks
Tubular Latches
Deadbolts
Series HL Heavy Duty Lever Latch Passage only
Series ML Medium Duty Lever Latch Passage or Privacy
Series KL Knob and Lever Latch Passage only
Series MD Medium Duty Privacy Deadbolt
Series KD Keyed Deadbolt
Series HD Heavy Duty Privacy Deadbolt
Series SM Standard Backset Mortise For Knobs and Levers
Series NM Narrow Backset Mortise For Knobs and Levers
Series EM European Mortise For Levers only
Page 8 Page 15 Page 18
Page 20 Pages 22 and 24 Page 26
Page 28 Page 30 Page 32
In this section we are illustratingour complete lines of ANSI stan-dard, narrow backset, Europeanmortise locks, as well as tubularlatches and bolts.
Lock and Latch Bodies Correlation Table to Sets
7
Lock Body Number Lockset Code Lock Function
SM 7122 . . . . . . . . . . . . . . . . . . . SM A . . . . . . . . . . . . . . . . . . . . . Store Door SM 7124 . . . . . . . . . . . . . . . . . . . SM B . . . . . . . . . . . . . . . . . . . . . Dormitory
SM E . . . . . . . . . . . . . . . . . . . . . Privacy SM 7125 . . . . . . . . . . . . . . . . . . . SM C . . . . . . . . . . . . . . . . . . . . . Passage SM 7134 . . . . . . . . . . . . . . . . . . . SM D . . . . . . . . . . . . . . . . . . . . . Hotel SM 7142 . . . . . . . . . . . . . . . . . . . SM F . . . . . . . . . . . . . . . . . . . . . Public Restroom SM 7145 . . . . . . . . . . . . . . . . . . . SM G . . . . . . . . . . . . . . . . . . . . . Classroom SM 7148 . . . . . . . . . . . . . . . . . . . SM H . . . . . . . . . . . . . . . . . . . . . Entrance SM 7156 . . . . . . . . . . . . . . . . . . . SM I . . . . . . . . . . . . . . . . . . . . . Office SM 7159 . . . . . . . . . . . . . . . . . . . SM J . . . . . . . . . . . . . . . . . . . . . Storeroom SM 7159 (EU/EL) . . . . . . . . . . . . SM J (EU/EL) . . . . . . . . . . . . . . . Electrified Storeroom SM 7167 . . . . . . . . . . . . . . . . . . . SM K . . . . . . . . . . . . . . . . . . . . . Apartment SM 7181 . . . . . . . . . . . . . . . . . . . SM M . . . . . . . . . . . . . . . . . . . . . Deadlock
SM N . . . . . . . . . . . . . . . . . . . . . Deadlock SM P . . . . . . . . . . . . . . . . . . . . . Deadlock SM R . . . . . . . . . . . . . . . . . . . . . Deadlock SM S . . . . . . . . . . . . . . . . . . . . . Deadlock
NM 7122 . . . . . . . . . . . . . . . . . . . NM A . . . . . . . . . . . . . . . . . . . . . Store Door NM 7124 . . . . . . . . . . . . . . . . . . . NM B . . . . . . . . . . . . . . . . . . . . . Dormitory
. . . . . . . . . . . . . . . . . . . NM E . . . . . . . . . . . . . . . . . . . . . Privacy NM 7125 . . . . . . . . . . . . . . . . . . . NM C . . . . . . . . . . . . . . . . . . . . . Passage NM 7142 . . . . . . . . . . . . . . . . . . . NM F . . . . . . . . . . . . . . . . . . . . . Public Restroom NM 7145 . . . . . . . . . . . . . . . . . . . NM G . . . . . . . . . . . . . . . . . . . . . Classroom NM 7148 . . . . . . . . . . . . . . . . . . . NM H . . . . . . . . . . . . . . . . . . . . . Entrance NM 7156 . . . . . . . . . . . . . . . . . . . NM I . . . . . . . . . . . . . . . . . . . . . Office NM 7159 . . . . . . . . . . . . . . . . . . . NM J . . . . . . . . . . . . . . . . . . . . . Storeroom NM 7181 . . . . . . . . . . . . . . . . . . . NM M . . . . . . . . . . . . . . . . . . . . . Deadlock
NM N . . . . . . . . . . . . . . . . . . . . . Deadlock NM P . . . . . . . . . . . . . . . . . . . . . Deadlock NM R . . . . . . . . . . . . . . . . . . . . . Deadlock NM S . . . . . . . . . . . . . . . . . . . . . Deadlock
EM 0001 . . . . . . . . . . . . . . . . . . . EM A . . . . . . . . . . . . . . . . . . . . . Store Door EM B . . . . . . . . . . . . . . . . . . . . . Dormitory
EM 0002 . . . . . . . . . . . . . . . . . . . EM E . . . . . . . . . . . . . . . . . . . . . Privacy EM 0003 . . . . . . . . . . . . . . . . . . . EM C . . . . . . . . . . . . . . . . . . . . . Passage EM 0004 . . . . . . . . . . . . . . . . . . . EM N . . . . . . . . . . . . . . . . . . . . . Deadlock
EM P . . . . . . . . . . . . . . . . . . . . . Deadlock
HL 7010 . . . . . . . . . . . . . . . . . . . HL C . . . . . . . . . . . . . . . . . . . . . Passage ML 7030 . . . . . . . . . . . . . . . . . . . ML C . . . . . . . . . . . . . . . . . . . . . Passage ML 7040 . . . . . . . . . . . . . . . . . . . ML E . . . . . . . . . . . . . . . . . . . . . Privacy KL 7050 . . . . . . . . . . . . . . . . . . . KL C . . . . . . . . . . . . . . . . . . . . . Passage Latch HD 7020 . . . . . . . . . . . . . . . . . . . HD R . . . . . . . . . . . . . . . . . . . . . Privacy Bolt
HD S . . . . . . . . . . . . . . . . . . . . . Privacy Bolt MD 7060 . . . . . . . . . . . . . . . . . . . MD R . . . . . . . . . . . . . . . . . . . . . Privacy Bolt
MD S . . . . . . . . . . . . . . . . . . . . . Privacy Bolt KD 7070 . . . . . . . . . . . . . . . . . . . KD N . . . . . . . . . . . . . . . . . . . . . Keyed Deadbolt
KD P . . . . . . . . . . . . . . . . . . . . . Keyed Deadbolt
Standard Mortise Lock Series SM Mortise Case and Functions
8
8"(203)
11⁄4"(32) x 11⁄8"
(29)
13⁄16"(30)
5⁄16"(8)
17⁄8"(48)
35⁄8"(92) 61⁄16"
(154)
Series SM Standard Backset Mortise Lock
Recommended for minimum13⁄4" (45 mm) door thicknesswith standard 11⁄4 " (32 mm) armor front. 1" (25.4 mm) armor front available for doors with 13⁄8"(35 mm) door thickness.
SM 7122 Store Door Lock Body
ANSI Code F14
SM 7124 Dormitory Lock Body
ANSI Code F13
Latch bolt by handle either side.Deadbolt by key either side.
Deadbolt by thumb turn insideand key or emergency releaseoutside.
SM 7125 Passage Lock Body
ANSI Code F01
Latch bolt by handle either side.
Standard Mortise Lock Series SM Mortise Case Functions
9
SM 7134 Hotel Lock Body
ANSI Code F15
SM 7142 Public Restroom Lock Body ANSI Code F09
Latch bolt by handle inside andguest or master key outside.Outside handle always rigid.Deadbolt by thumbturn insideand service key only outside.
Use of inside handle retractslatch and deadbolt simultane -ously. Auxiliary latch deadlocks latchbolt.
Latch bolt by handle either sideunless outside handle is lockedby master key from inside (cylinders are provided KD).When outside handle is locked,latch bolt by key outside andhandle inside.
Auxiliary latch deadlocks latchbolt.
SM 7145 Classroom Lock Body
ANSI Code F05
SM 7148 Entrance Lock Body
ANSI Code F12
Latch bolt by key outside andhandle either side unless out -side handle is locked by keyoutside. Auxiliary latch deadlocks latchbolt.
Latch bolt by key outside andhandle either side unless out-side handle is locked by toggle.Deadbolt by key outside andthumbturn inside. Inside handleretracts latch and deadbolt.
Outside handle is rigid whendeadbolt is thrown by key orthumbturn.
SM 7156 Office Lock Body
ANSI Code F04
SM 7159 Storeroom Lock Body
ANSI Code F07
Latch bolt by key outside andhandle either side unless out -side handle is locked by toggle.Auxiliary latch deadlocks latchbolt.
Latch bolt by handle inside andkey outside. Outside handle always rigid. Auxiliary latch deadlocks latchbolt.
Standard Mortise Lock Series SM Mortise Case Functions
10
SM 7167 Apartment Lock Body
ANSI Code F20
SM 7159 EU or EL Electrified Storeroom Lock Body (EU = fail secure) (EL = fail safe)
Key outside retracts latch bolt,when outside lever is locked.Outside lever retracts latch boltexcept when locked. Outsidelever can only be locked withthe solenoid. Inside lever alwaysretracts latch bolt.
Auxiliary latch deadlocks latchbolt.
See details page 12.
Same as SM 7148 with the following addition: Auxiliary latch deadlocks latchbolt and prevents manipulationof locked toggle. Outside handleis rigid when deadbolt is thrownby key or thumbturn.
SM 7181 Deadlock Lock Body
ANSI Code F18
Deadbolt by key, thumbturn, oremergency release either side.
Standard Mortise Lock Series SM Information and Specifications
11
SM Series
A high quality heavy duty com-mercial grade mortise lock series(Grade 1) capable of meetingthe requirements of a vast arrayof lever and knob designs.Available stand ard as a 2 3⁄4"backset, they may also be hadin 21⁄2", 3 3⁄4", 5" and 6"extended backsets.
The SM Series incorporates astand ard 11⁄4" wide faceplateand are designed for doors 13⁄4"thick and greater. They may alsobe ordered with a 1" wide face-plate designed for doors 13⁄8"thick and greater on request.Handed strikes for hollow metaland wood frame construc tionconforms to ANSI StandardA 115.1, 4.875" × 1.25" (124 ×32 mm) lip to center. Flat lip,special length and customstrikes may also be ordered toaccommodate various projectconditions and require ments.Locks are available in a variety ofkeyed and non- keyed functionsand include emergency egressfunctions where applicable.
The SM Series employs high -carbon steel compression springsfor long life and dur a bility ofservice. Hubs are fabricated ofoil impregnated, copper infil trat -ed sintered steel, for addition alstrength and positive latchretraction. Cases are de signedto accommodate FSB throughbolted trim for positive align-ment with the lock case.
The SM Series are regularlyfurnished with a 3⁄4" throw, two-piece mechanical heavy-dutyanti-friction latch bolt to meetUL requirements for use on apair of fire doors.
Deadbolts are fabricated withhardened steel inserts. Face -plates and strikes are fabricatedstandard in nonmagnetic 304alloy stainless steel. Brass orbronze substrates and mostdecorative finishes may be hadon a special order basis.
The SM Series are UL Listed(3 Hour) for use on fire doorsand can be specified for appli -cations in offices, schools, hos -pitals, hotels, and commercialbuildings, as well as residences.
All FSB mortise locks are com-patible with most US cylinders.When using other brands ofcylinders, they must be suppliedwith an FSB compatible cam.
Federal Specification
Conforms to all performance andstructural specifications of ANSIA 156.13, Series 1000, Grade 1Mortise Locks and Latches.
UL Listing
3 Hour rated by UnderwritersLaboratories, Inc. on all seriesof single-point locks or latchesillustrated within this section. UL File No. R16617
Steel Case
Size varies according to backset.Heavy gauge .093" (2.36 mm)thick, corrosion resistant zincdichromate finish.
Armor Front and Scalp
.218" × 1.25" × 8" (5.5 × 32 × 203 mm) or .218" × 1" × 8" (5.5 × 25.4 × 203 mm). Adjustable for beveled conditionsfrom flat to standard bevel .125" on 2" (3 on 51 mm).
Faceplate (Scalp only)
.062" × 1.25" × 8" (1.57 × 32 × 203 mm) or .062" × 1" × 8" (1.57 × 25.4 × 203 mm). Wrought stainless steel, bronzeor brass substrate.
Anti-Friction Latch Bolt
.625" × 1" (12 × 25.4 mm) ×
.75" (19 mm) throw. Two-piece mechanical oil im-pregnated sintered stainlesssteel.
Deadbolt
.5625 × 1.25" (14 × 32 mm) ×1" (25.4 mm) throw. Solid forged stainless steel throwwith free-rotating hardened steelsaw-proof inserts.
Hub (Split)
Providing emergency egress. .315" (8 mm) square oil im -pregnated, copper infiltratedsintered steel with one way rota-tion for levers (LS) and two-wayrotation for knobs (KS).
Thumbturn Hub
.2" (5 mm) diamond, oil impreg-nated, copper infiltrated sinteredsteel, 90 degree rotation.
Backsets
2.50" (64 mm), 2.75" (70 mm),3.75 (95 mm), 5" (127 mm)and 6" (152 mm).
Spacing
3.625" (92 mm) center hub tocenter cylinder, 2.4375" (62 mm)center lever hub to thumbturnhub.
Through-bolting
1.5" (38 mm) to 1.6875"(43 mm) center to center.
Strike
4.875" × 1.25" (124 × 32 mm)lip to center. Wrought stainlesssteel, bronze, and brass sub-strate finished to match. Supplied to ANSI StandardA 115.1. Regularly furnishedwith curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
Template
Metal doors and frames to beprepared in accordance withANSI A 115.11.
Face cutouts and center tocenter dimensions are subjectto variation. Always review trimrequirements prior to doorpreparation.
Electrified Mortise Lock Series SM Mortise Case and Function
12
Series SM ELor SM EU
Recommended for minimum13⁄4" (45 mm) door thicknesswith standard 11⁄4 " (32 mm) armor front. 1" (25.4 mm) armor front available for doors with 13⁄8"(35 mm) door thickness.
8"(203)
11⁄4"(32) x 11⁄8"
(29)
13⁄16"(30)
5⁄16"(8)
17⁄8"(48)
35⁄8"(92) 61⁄16"
(154)
SM 7159 EU or EL Electrified Storeroom Lock Body (EU = fail secure) (EL = fail safe)
Solenoid activated mortise lock.
EL function – Power ON, locksoutside lever (by solenoid).EU function – Power OFF, locksoutside lever (by solenoid).
Key outside retracts latch bolt,when outside lever is locked.Outside lever retracts latch boltexcept when locked.
Outside lever can only belocked with the solenoid. Insidelever always retracts latch bolt. Auxiliary latch deadlocks latchbolt.
Monitoring Options
AE = Authorized Egress LM = Latch Bolt Monitoring SM = Security Monitoring
(only for 2 3⁄4" backset)
Electrified Mortise Lock Series SM Functions and Specifications
13
Specific Features
EL = Fail Safe (Power Lock)
Outside trim is locked whenpower is applied (storeroomfunction) and unlocked whenpower is removed (passagefunction). Lockset will unlock in event of power failure.
EU = Fail Secure
(Power Unlock)
Outside trim is unlocked whenpower is applied (passage function) and locked when power is removed (storeroomfunction). Lockset will lock inevent of power failure.
· When key cylinders are provid-ed in the locks, the latchboltmay be momentarily retractedwith key even though electri-cally locked. Note: Locks thatare electrically unlocked maynot be locked via the keycylinder.
· Interface with Life-SafetySystems.
· Continuous duty solenoids
· UL Listed Modifications
SM Series Electrified Locks
All Mortise Locksets may beelectrified for electro mechanicalfunction requirements. Solenoidare UL tested for cycle life, lowoperating temperature, shockand fire hazard qualifi cations.
Electromechanical locks are designed for intermittent or con -tinu ous duty and are availablein either 12 or 24 VAC/VDC, andmay be ordered either EL (fail-safe) or EU (fail-secure).
The SM Series have been testedin accordance with the AmericanNational Standard for MortiseLocks and Latches and meet orexceed the ANSI A 156.13-1987specifications, making them thebest choice for any buildingwhere safety, security and design com pa ti bility are primeconsider ations.
1. 2. 3. 4. 5. Extra Information Required 6. 7. 8.
1147-ST-6204-SM-JEU (or EL), 12 (or 24 V), AC (or DC) -2 3⁄4" -RHR- 1 3⁄4"
To specify FSB electrified mortiselocks additional information mustbe provided regarding the lockfunction (No. 5 from specifyinglocksets, “Lockset Program”Section), per the example below.
Electrified Mortise Lock Series SM Installation
14
RED - Normally Open
YELLOW - CommonGRAY - Normally Closed
BLACK - Common
RED - Closed Loop SecureWHITE - Open Loop Secure
BLACK - Common
GREEN - Closed Loop SecureBROWN - Open Loop Secure
BLUEBLUE
WHITEWHITE
AC POWERLEADS
DC POWERLEADS
OR
Wiring Schematics by option
EL & EU – Fail Safe and Fail Secure
AE – Authorized Egress
LM – Latchbolt Monitor
SM – Security Monitoring
PowerSupply
MortarGuard
ElectricHingeElectric Lock
DoorControl
115 Volt Input
Typical installation
Note: Red Ty-Wrap on leadsdesignates 12 Volt
Optional monitoring features
AE (Authorized Egress Monitor)
Monitors the use of the insidelever. This feature may be usedto shunt an alarm, signal a con-trol console, activate an alarm,or control an electromagneticlock for egress.
LM (Latch Bolt Monitor)
Monitors the full extension ofthe main latch. This feature maybe used to signal a control con-sole, activate an alarm, or con-trol an electromagnetic lock forentrance and egress.
SM (Security Monitor)
Available on 2 3⁄4" backset only. Monitors the status of both thesolenoid (locked or unlocked)and the auxiliary latch (dead-latch position). This feature maybe used to determine the secu-rity status (locked or unlocked),activate an alarm, or send notifi-cation to a control console.
Note: When monitoring featuresare required in a lockset, addAE, LM or SM after the designa-tion EU or EL (example: 1147 J EU/AE)
Narrow Mortise Lock Series NM Mortise Case and Functions
15
Series NM Narrow Backset Mortise Lock
Recommended for minimum13⁄4" (45 mm) door thicknesswith standard 11⁄4 " (32 mm) armor front. 1" (25.4 mm) armor front available for doors with 13⁄8"(35 mm) door thickness.
8"(203)
11⁄4"(32) x 11⁄8"
(29)
13⁄16"(30)
5⁄16"(8)
17⁄8"(48)
35⁄8"(92) 61⁄16"
(154)
NM 7122 Store Door Lock Body
ANSI Code F14
NM 7124 Dormitory Lock Body
ANSI Code F13
Latch bolt by handle either side.Deadbolt by key either side.
Deadbolt by thumb turn insideand key or emergency releaseoutside.
NM 7125 Passage Lock Body
ANSI Code F01
Latch bolt by handle either side.
Narrow Mortise Lock Series NM Mortise Case Functions
16
NM 7142 Public Restroom Lock Body ANSI Code F09
Latch bolt by handle either sideunless outside handle is lockedby master key from inside (cylinders are provided KD).When outside handle is locked,latch bolt by key outside andhandle inside.
Auxiliary latch deadlocks latchbolt.
NM 7156 Office Lock Body
ANSI Code F04
NM 7145 Classroom Lock Body
ANSI Code F05
Latch bolt by key outside andhandle either side unless out -side handle is locked by keyoutside. Auxiliary latch deadlocks latchbolt.
NM 7148 Entrance Lock Body
ANSI Code F12
Latch bolt by key outside andhandle either side unless out -side handle is locked by toggle.Deadbolt by key outside andthumbturn inside. Inside handleretracts latch and deadbolt.
Outside handle is rigid whendeadbolt is thrown by key orthumbturn.
Latch bolt by key outside andhandle either side unless out -side handle is locked by toggle.Auxiliary latch deadlocks latchbolt.
NM 7159 Storeroom Lock Body
ANSI Code F07
Latch bolt by handle inside andkey outside. Outside handle always rigid. Auxiliary latch deadlocks latchbolt.
NM 7181 Deadlock Lock Body
ANSI Code F18
Deadbolt by key, thumbturn, oremergency release either side.
Narrow Mortise Lock Series NM Information and Specifications
17
NM Series
A high quality heavy duty com-mercial grade narrow backsetmortise lock series capable ofmeeting the requirements of avast array of lever handle designsand are available in 11⁄2", 13⁄4",2" and 21⁄4" backsets.
The NM Series incorporates astand ard 11⁄4" wide faceplateand are designed for doors 13⁄4"thick and greater. They may alsobe ordered with a 1" wide face-plate designed for doors 13⁄8"thick and greater on request.Function specific, handed strikesfor hollow metal and wood frameconstruction conforms to ANSIStandard A 115.1, 4 7⁄8" × 11⁄4"(124 × 32 mm) lip to center. Flatlip, special length and cus tomstrikes may also be ordered toaccommodate various projectconditions and require ments.
The NM Series employs high -carbon steel compression springsfor long life and dur a bility ofservice. Hubs are fabricated ofsolid brass. Cases are designedto accommodate a limited arrayof FSB through bolt ed trim forpositive alignment with the lockcase.
The NM Series are regularlyfurnished with a 1⁄2" throw one-piece mechanical heavy-dutylatch bolt.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel. Brassor bronze substrates and mostdecorative finishes may be hadon a special order basis.
The NM Series are not yet ULlisted and should only be speci-fied for applications not requiringa fire-rated or UL listed lockset.Please contact FSB for the cur-rent status of our UL approval.
All mortise locks are compatiblewith most US cylinders. Whenusing other brands of cylinders,they must be supplied with anFSB compatible cam.
Steel Case
Size varies according to backset.Heavy gauge .093" (2.36 mm)thick, corrosion resistant zincdichromate finish.
Armor Front and Scalp
.218" × 1.25" × 8" (5.5 × 32 × 203 mm) or .218" × 1" × 8" (5.5 × 25.4 × 203 mm). Adjustable for beveled condi tionsfrom flat to standard bevel .125" on 2" (3 on 51 mm).
Faceplate (Scalp only)
.062" × 1.25" × 8" (1.57 × 32 × 203 mm) or .062" × 1" × 8" (1.57 × 25.4 × 203 mm).Wrought stainless steel, bronzeor brass substrate.
Latch Bolt
.5" × 1" (12.7 × 25.4 mm) ×
.5" (12.7 mm) throw. One-piecesolid brass.
Deadbolt
.625" × .75" (16 × 19 mm) × 1" (25.4 mm) throw with free-rotating hardened steel saw-proof inserts. Solid brass.
Hub (Solid)
.315 (8 mm) square solid brasswith one way rotation for levers(LS) and two-way rotation forknobs (KS).
Thumbturn Hub
.2" (5 mm) diamond, solidbrass, 90 degree rotation.
Backsets
1.50" (38 mm), 1.75" (45 mm),2.00" (51 mm), 2.25" (57 mm).
Spacing
3.625" (92 mm) center hub tocenter cylinder, 2.4375" (62 mm)center lever hub to thumbturnhub.
Through-bolting
1.5" (38 mm) to 1.6875" (43 mm) center to center.
Strike
4.875" × 1.25" (124 × 32 mm)lip to center. Wrought stainlesssteel, bronze, and brass sub-strate finished to match. Supplied to ANSI StandardA 115.1. Regularly furnishedwith curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
Template
Metal doors and frames to beprepared in accordance withANSI A 115.11.
Face cutouts and center tocenter dimensions are subjectto variation. Always review trimrequirements prior to doorpreparation.
European Mortise Lock Series EM Mortise Case and Functions
18
EM 0001 Entry Door Lock Body
Latch bolt by cylinder and handleeither side unless deadbolt is inlocked position. Deadbolt by key or thumbturneither side.
Activated with key × key or key × thumbturn European profile cylinder. Lever to cylinder center-to-center: 2 13⁄16" (72 mm).
EM 0003 Passage Lock Body
EM 0002 Privacy Lock Body
Latch bolt by handle either side.
Latch bolt by handle either sideunless deadbolt is in locked position. Deadbolt by emergencyrelease outside and thumbturninside connected by 8 mm spindle on the square.
Lever to thumbturn center-to-center: 3 1⁄16" (78 mm).
Series EM European Mortise Lock
Recommended for minimum13⁄8" (35 mm) door thickness.
91⁄4"(235)
15⁄16"(24)
a = 15⁄32" (12) b = 13⁄16" (21)
23⁄16"(55)
15⁄16"(33.5)
a
b
61⁄2"(165)
11⁄2"(38)
213⁄16"(72)
European Mortise Lock Series EM Information and Specifications
19
EM 0004 Deadbolt Lock Body
Deadbolt by key or thumbturneither side.
55 mm backset 72 mm CTC
EM Series
Mortise lock with reversible latchcompatible with DIN 18251class 2, PZ 72 mm, backset2 3⁄16" (55 mm, only), 8 mm self-tightening follower. Stain-less steel forend for flush edgeddoors, 91⁄4" × 15⁄16" (235 × 24 mm),square edges, galvanized lock-case with self securing screws,double throw, latch and boltzinc galvanized. A high qualitycommercial grade mortise lockseries, DIN class 2, capable ofmeeting the requirements of allFSB lever handle designs. Available standard as a 2 3⁄16"(55 mm) backset only.
The EM Series incorporates astandard 15⁄16" wide faceplateand are designed for doors 13⁄8"thick and greater. The front plateis permanently fixed to the lockcase. The front plate is finishedin satin stainless steel and can-not be provided in other finishes.A function specific (non-hand-ed) curved lip strike for hollowmetal and wood frame construc-tion conforms to DIN Standard18251. Locks are field reversibleand available in a variety ofkeyed and non-keyed functions.
The EM Series lock case ismanufactured from galvanizedsteel with self-securing screws.Cases are designed to accom-modate FSB through bolted trimfor positive alignment with thelock case.
The EM Series is regularly fur-nished with a double throw zincgalvanized bolt. The bolt proj-ects 13⁄16" (21 mm) when fullyextended.
All FSB mortise locks are com-patible with all DIN profile cylin-ders. FSB also offers rekeyable,“C-type” Keyway DIN cylindersin both key by key and key byturn configurations, for doorthickness between 13⁄8" to 21⁄4".
Emergency egress is not availablewith this lock series.
Faceplate (Scalp)
91⁄4" × 15⁄16" (235 × 24 mm). Satin stainless steel fixed tofront of lock case.
Latch
.5" (12.7 mm) throw. Cast ironzinc galvanized.
Deadbolt
.315" × 1.38" (8 × 35 mm) × .827" (21 mm) throw. Material: Cast iron zinc galvanized.
Hub
.315" (8 mm) square PA plasticfollower with steel blade, oneway rotation for levers.
Privacy set Hub
.315" (8 mm) square, singlethrow action, 90 degree rotation.
Backset
2.19" (55 mm).
Spacing
2.83" (72 mm) center hub tocenter cylinder, 3.07" (78 mm)center lever hub to thumbturnhub.
Through-bolting
1.5" (38 mm) center to center.
Strike
Curved lip strike for hollow metaland wood frame constructionwithout dust box. See drawingsfor dimensions. Flat lip and spe-cial length strikes and wroughtdust boxes may be had on aspecial order basis.
Template
Metal doors and frames to beprepared in accordance withthe according FSB template.
Heavy Duty Lever Latch Series HL Latch and Function
20
HL 7010 Heavy Duty Lever Latch Passage only
Recommended for minimum13⁄4" (45 mm) door thickness.
Latch bolt by handle either side.
For use on non-drilled doors or pre-drilled doors with non-sprung roses.
5⁄16" (8)
21⁄4"(57)
15⁄8"(41)
11⁄8" (28.5)
33⁄8"(85)/33⁄4"(95)
x
HL 7010 Passage
21
Heavy Duty Lever Latch Series HL Information and Specifications HL 7010
A high quality heavy duty gradetubular latch and mortise boltseries capable of meeting therequirements of a vast array ofFSB lever handle designs andmatching thumb turn trim foruse on typical 1" Ø edge borepre-drilled commercial and residential doors (13⁄4" doorthick ness). Available stand ardin either 2 3⁄8" (60 mm) or 2 3⁄4"(70 mm) backsets.
The HL 7010 incorporates astan d ard 21⁄4" × 11⁄8" (57 × 28.5 mm) wide faceplate and isdesigned for commercial andresidential doors 13⁄4" thick andgreater. A universal curved lipstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄4" (70 × 32 mm) lip tocenter. Flat lip, full lip, speciallength and custom strikes mayalso be ordered to accommo-date various project conditionsand require ments. All HL serieslatches, mortise bolts andstrikes are field reversible.
The 7010 passage latches areregularly furnished with a 1⁄2"throw one-piece mechanicalheavy-duty solid brass satinnickel finished latch bolt. Theyemploy high-carbon steel com-pression springs for long lifeand dur a bility of service. Uni-directional hubs designed forlevers only, are fabricated ofsolid brass for additional strengthand feature a 28 degree rotationof the hub for positive latch re -traction. Cases accommodateFSB through bolted trim for positive alignment with the latchcase. One of the greatest advan-tages of the 7010 heavy dutylatch is the ability to com bine itwith any of our FSB roses.
For use as a privacy function, itis necessary to utilize an inde -pendent mortise bolt. The 7020mortise dead bolt is fabricated insolid brass satin nickel finished.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
The HL 7010 is UL Listed (3Hour) for use on fire doors, sur-passes over 400,000 operatingcycles and can be specified forappli cations in offices, schools,hos pitals, hotels, and commercialbuildings, as well as residences.
Passage Latch 7010
UL Listing
3 Hour rated by UnderwritersLaboratories, Inc. on all latches. UL File No. R16617
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, stainless steel.
Latch Front and Faceplate
.150" × 1.125" × 2.25"(3.8 × 28.5 × 57 mm). Wrought stainless steel sub-strate. Adjustable for beveledconditions from flat to standardbevel .125" on 2" (3 on 51 mm).
Latch Bolt
.625" × .75" (16 × 19 mm) ×
.50" (12.7 mm) throw. One-piece solid brass. Field reversible.
Hub
.315 (8 mm) square solid brasswith one way rotation for levers(LS).
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.25" (70 × 32 mm) lip to center. Wrought stainlesssteel substrate finished to match.Regularly furnished with univer-sal curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
22
Medium Duty Lever Latch Series ML Latch and Function
ML 7030 Medium Duty Lever Latch Passage
Recommended for minimum13⁄8" (35 mm) door thickness.
ML 7030 Passage
Latch bolt by handle either side.
Supplied with 8 mm square hubas shown.
5⁄16" (8)
21⁄4"(57)
15⁄8"(41)
1"(25.4)
33⁄8"(85)/33⁄4"(95)
x
Medium Duty Lever Latch Series ML Information and Specifications
23
ML 7030
A high quality residential gradetubular latch series capable ofmeeting the requirements of avast array of FSB lever handledesigns for use on more typical15⁄16" Ø edge bore and 2 1⁄8" facebore pre-drilled residential doors(13⁄8" door thickness). Availablestand ard in either 2 3⁄8" or 2 3⁄4"backsets.
The ML 7030 incorporates astand ard 21⁄4" × 1" wide face-plate and is designed for resi-dential doors 13⁄8" thick andgreater. A universal curved lipstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄4" (70 × 32 mm) lip tocenter. Flat lip, full lip, speciallength and custom strikes mayalso be ordered to accommo-date various project conditionsand require ments. All MLresidential series latches andstrikes are field reversible andinclude emergency egressfunctions where applicable.
The 7030 latch is regularlyfurnished with a 1⁄2" throw one-piece mechanical heavy-dutysolid brass satin nickel finishedlatch bolt. They employ high-carbon steel compression springsfor long life and dur a bility ofservice. Uni- directional hubsdesigned for levers only, arefabricated of solid brass for ad-ditional strength and feature a28 degree rotation of the hubfor positive latch retraction. Cases accommodate FSBthrough-bolted trim for positivealignment with the latch case.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
Passage Latch 7030
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, corrosion resistant zincdichromate finish.
Latch Front and Faceplate
.182" × 1" × 2.25" (6.62 × 25.4 × 57 mm). Wrought stainless steel or brass,finished to match. Adjustablefor beveled conditions from flatto standard bevel .125" on 2" (3 on 51 mm).
Latch Bolt
.625" × .75" (16 × 19 mm) ×
.50" (12.7 mm) throw. One-piece solid brass. Field reversible.
Hub
.315 (8 mm) square, corrosionresistant zinc dichromate finishon steel, with one way rotationfor levers (LS).
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.25" (70 × 32 mm) lip to center. Wrought stainlesssteel substrate finished to match.Regularly furnished with univer-sal curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
Medium Duty Lever Latch Series ML Latch and Functions
24
ML 7040 Privacy Latch (when combined with ML 7041)
Latch bolt by handle either side.Outside handle locked by pushbutton inside. Inside handle retracts latch bolt and unlocksoutside handle. Supplied with 8 mm clover hubas shown.
ML 7041 Privacy Mechanism
Provide push button locking,emergency egress and emer-gency release, when combinedwith ML 7040 latch.
For 13⁄8" – 2" thick doors with1799 rose and 13⁄4" – 21⁄4" thickdoors with 1798 rose.
ML 7040 Medium Duty Lever Latch Privacy
Recommended for minimum13⁄8" (35 mm) door thicknessand maximum 21⁄4" (57 mm)door thickness.
5⁄16" (8)
21⁄4"(57)
15⁄8"(41)
1"(25.4)
33⁄8"(85)/33⁄4"(95)
x
Medium Duty Lever Latch Series ML Information and Specifications
25
ML 7040
A high quality residential gradetubular latch series capable ofmeeting the requirements of avast array of FSB lever handledesigns for use on more typical15⁄16" Ø edge bore and 2 1⁄8" facebore pre-drilled residential doors(13⁄8" door thickness). Availablestand ard in either 2 3⁄8" or 2 3⁄4"backsets.
The ML 7040 incorporates astand ard 21⁄4" × 1" wide face-plate and is designed for resi-dential doors 13⁄8" thick andgreater. A universal curved lipstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄4" (70 × 32 mm) lip tocenter. Flat lip, full lip, speciallength and custom strikes mayalso be ordered to accommo-date various project conditionsand require ments. All MLresidential series latches andstrikes are field reversible andinclude emergency egressfunctions where applicable.
The 7040 latch is regularlyfurnished with a 1⁄2" throw one-piece mechanical heavy-dutysolid brass satin nickel finishedlatch bolt. They employ high-carbon steel compression springsfor long life and dur a bility ofservice. Uni- directional hubsdesigned for levers only, arefabricated of solid brass for ad-ditional strength and feature a28 degree rotation of the hubfor positive latch retraction. Cases accommodate FSBthrough bolted trim for positivealignment with the latch case.One of the most convincingadvantages of the ML 7040 privacy latch when used in con-junction with the FSB privacymechanism is it’s ability toprovide emergency egress frominside a room combined withemergency release from outside.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
Residential grade privacy latch7040 may only be used in com-bination with FSB 7041 privacymechanism and must be orderedas a complete set.
Privacy Latch 7040
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, corrosion resistant zincdichromate finish.
Latch Front and Faceplate
.182" × 1" × 2.25" (4.62 × 25.4 × 57 mm). Wrought stainless steel or brass,finished to match. Adjustablefor beveled conditions from flatto standard bevel .125" on 2" (3 on 51 mm).
Latch Bolt
.625" × .75" (16 × 19 mm) ×
.50" (12.7 mm) throw. One-piece solid brass. Field reversible.
Hub
.315 (8 mm) clover, corrosionresistant zinc dichromate finishon steel, with one way rotationfor levers (LS).
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.25" (70 × 32 mm) lip to center. Wrought stainlesssteel substrate finished to match.Regularly furnished with univer-sal curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
Knob and Lever Latch Series KL Latch and Function
26
5⁄16"(8)
21⁄4"(57)
15⁄8"(41)
1"(25.4)
33⁄8"(85)/33⁄4"(95)
x
KL 7050 Knob and Lever Latch Passage only
Recommended for minimum13⁄8" (35 mm) door thickness.
KL 7050 Passage Knob Latch
Latch bolt by knob either side.
Latch bolt by lever either side.
For use with knobs on non-drilled and pre-drilled doors.
For use with levers on non-drilled doors with 1731 2111 or1707 2111 sprung roses only.
Knob and Lever Latch Series KL Information and Specifications
27
KL 7050
An economical residential gradetubular latch and mortise boltcapable of meeting the require-ments of a vast array of FSBdoorknob designs for use ontypical 15⁄16" Ø edge bore pre-drilled residential doors (13⁄8"door thick ness). Availablestand ard in either 2 3⁄8" or 2 3⁄4"backsets.
The KL 7050 incorporates astand ard 21⁄4" × 1" wide face-plate and is designed for resi-dential doors 13⁄8" thick andgreater. A universal curved lipstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄4" (70 × 32 mm) lip tocenter. Flat lip, full lip, speciallength and custom strikes mayalso be ordered to accommo-date various project conditionsand require ments. The KL series latches and strikes arefield reversible.
The 7050 passage latch is regularly furnished with a 1⁄2"throw one-piece mechanical solid brass satin nickel finishedlatch bolt. Bi- directional hubsdesigned for knobs only, are fabricated of solid brass for additional strength and featurea 28 degree rotation of the hubfor positive latch retraction. Cases accommodate FSBthrough bolted trim for positivealignment with the latch case.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel andcannot be finished to matchother FSB finishes.
Passage Latch 7050
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, corrosion resistant zincfinish.
Faceplate
.150" × 1" × 2.25" (3.8 × 25.4 × 57 mm). Wrought stainless steel substrateonly. Adjustable for beveledconditions from flat to standardbevel .125" on 2" (3 on 51 mm). Note: Latch front and faceplateare one piece (permanently affixed). As a result the face-plate is only available in satinstainless steel finish.
Latch Bolt
.675" × .8" (17 × 20 mm) ×
.5" (12.7 mm) throw. One-piece solid brass. Field reversible.
Hub
.315 (8 mm) square solid brasswith two way rotation for knobs(KS).
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.25" (70 × 32 mm) lip to center. Wrought stainlesssteel substrate finished to match.Regularly furnished with univer-sal curved lip strike with plasticdust box. Flat lip, full lip, speciallength strikes and wrought dustboxes may be had on a specialorder basis.
Heavy Duty Privacy Deadbolt Series HD Deadbolt and Function
28
3⁄16" (5)
21⁄4"(57)
15⁄8"(41)
11⁄8" (28.5)
33⁄8"(85)/33⁄4"(95)
x
HD 7020 Heavy Duty Privacy Deadbolt
Recommended for minimum13⁄4" (45 mm) door thickness.
HD 7020 Privacy Deadbolt
Deadbolt by thumbturn oneside, or deadbolt by thumbturnone side and emergency releasethe other.
Heavy Duty Privacy Deadbolt Information and Specifications
29
HD 7020
A high quality heavy duty tubularlatch and mortise bolt capableof meeting the requirements ofa vast array of FSB lever handledesigns and matching thumb -turn trim for use on typical 15⁄16" Ø edge bore pre-drilledcommercial and residentialdoors (13⁄4" door thick ness).Available stand ard in either 2 3⁄8" (60 mm) or 2 3⁄4" (70 mm)backsets.
The HD 7020 incorporates astand ard 21⁄4" × 11⁄8" wide faceplate and is designed forcommercial and residentialdoors 13⁄4" thick and greater. A universal deadbolt strike issupplied for hollow metal andwood frame construction 2 3⁄4" × 11⁄8" (70 × 28.5 mm).Special length and customstrikes may also be ordered toaccommodate various projectconditions and require ments.The HD series, mortise boltsand strikes are field reversible.
The 7020 mortise dead bolt isfabricated in solid brass satinnickel finished.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
Deadbolt requires 90 degree rotation for full bolt extension.
Mortise Bolt 7020
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, stainless steel.
Latch Front and Faceplate
.155" × 1.125" × 2.25" (3.9 × 28.5 × 57 mm). Wrought stainless steel sub-strate. Adjustable for beveledconditions from flat to standardbevel .125" on 2" (3 on 51 mm).
Dead Bolt
.625" × .75" (16 × 19 mm) ×
.715" (18 mm) throw. One-piece solid brass. Full bolt extension achieved with 90° thumbturn rotation
Hub
.2" (5 mm) diamond.
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.125" (70 × 28.5 mm).Wrought stainless steel substratefinished to match, supplied asstandard with a black plasticdustbox.
Medium Duty Privacy Deadbolt Series MD Deadbolt and Function
30
3⁄16" (5)
21⁄4"(57)
15⁄8"(41)
1"(25.4)
39⁄16"(90)/315⁄16"(100)
x
MD 7060 Medium Duty Privacy Deadbolt
Recommended for minimum13⁄8" (35 mm) door thickness.
MD 7060 Mortise Bolt
Deadbolt by thumbturn oneside, or deadbolt by thumbturnone side and emergency releasethe other.
Medium Duty Privacy Deadbolt Information and Specifications
31
MD 7060
An economical residential gradetubular latch and mortise boltcapable of meeting the require-ments of a vast array of FSBdoorknob designs for use ontypical 1" Ø edge bore pre-drilled residential doors (13⁄8"door thick ness). Availablestand ard in either 2 3⁄8" or 2 3⁄4"backsets.
The MD 7060 incorporates astand ard 21⁄4" × 1" wide face-plate and is designed for resi-dential doors 13⁄8" thick andgreater. A universal deadboltstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄8" (70 × 28.5 mm).Special length and customstrikes may also be ordered toaccommodate various projectconditions and require ments.The MD mortise bolts andstrikes are field reversible.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
The 7060 privacy dead bolt isfabricated in solid brass satinnickel finished. Dead bolt re-quires 135 degree rotation forfull bolt extension.
Privacy Dead Bolt 7060
Steel Case
Size varies according to backset.Heavy gauge .030" (.76 mm)thick, corrosion resistant zincfinish.
Latch Front and Faceplate
.140" × 1" × 2.25" (3.6 × 25.4 × 57 mm). Wrought stainless steel or brass,finished to match.
Dead Bolt
.625" × .75" (16 × 19 mm) ×
.625" (16 mm) throw. One-piece solid brass.
Hub
.2 (5 mm) diamond. 135° rotation for full bolt extension.
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.125" (70 × 28.5 mm).Wrought stainless steel or brass,finished to match, supplied asstandard with a black plasticdustbox.
Keyed Deadbolt Series KD Deadbolt and Function
32
3⁄16" (5) hub
21⁄4"(57)
15⁄8"(41)
1"(25.4)
31⁄4"(83) /35⁄8"(92)
x
KD 7070 Keyed Deadbolt
Recommended for minimum13⁄8" (35 mm) door thickness.
KD 7070 Keyed Deadbolt
Deadbolt by key or thumbturneither side.
Keyed Deadbolt Series KD Information and Specifications
33
Keyed Tubular Entry Deadbolt
Latch Front and Faceplate
.140" × 1" × 2.25" (3.6 × 25.4 × 57 mm). Wrought stainless steel or brass,finished to match.
Dead Bolt
.625" × .75" (16 × 19 mm) × 1" (25.4 mm) throw. One-piecesolid brass.
Hub
.3125" (8 mm) cross. 90° rotation for full bolt extension.
Backsets
2.375" (60 mm), 2.75" (70 mm).
Strike
2.75" × 1.125" (70 × 28.5 mm).Wrought stainless steel or brass,finished to match, supplied asstandard with a black plasticdustbox.
KD 7070
A high quality residential gradetubular deadbolt capable ofmeeting the requirements of anarray of FSB trim designs foruse on more typical 1" Ø edgebore and 21⁄8" face bore pre-drilled residential doors (13⁄8"door thickness). They may alsobe specified for 15⁄8" face borepre-drilled residential doors totake advantage of our reduceddiameter trim designs. Availablestandard in either 2 3⁄8" or 2 3⁄4"backsets.
The KD 7070 keyed deadboltincorporates a stand ard 21⁄4" ×1" wide faceplate and is de-signed for residential doors 13⁄8"thick or greater. A universalstrike is supplied for hollow metaland wood frame construction2 3⁄4" × 11⁄8" (70 × 28.5 mm) andis also provided with a blackplastic dust box.
The KD 7070 deadbolt is non-handed and regularly furnishedwith a 1" throw one-piece me-chanical heavy-duty solid brasssatin nickel finished deadboltand feature a 90 degree rotationof the hub for full deadbolt ex-tension.
FSB tubular deadbolt trim hasthe advantage of being installedinto typical door preparationsfor standard pre-bored (21⁄8"and 15⁄8") residential doors. Thecylinder ring for the 21⁄8" bore is65 mm Ø, to match our 1798and 1799 tubular latch roses.The cylinder ring for the 15⁄8"bore is 55 mm Ø, to match our1731 and 1707 tubular latchroses. This design featureallows the designer to chose theappropriate cylinder ring basedon the door application or thedesign intent.
Face plates and strikes are fabri-cated standard in nonmagnetic304 alloy stainless steel.
Alignment Tools North American Cylinders
34
8806 7165 Length 1" (25.4 mm)
8806 7185 Length 11⁄8" (28.5 mm)
8806 7205 Length 11⁄4" (32 mm)
13⁄8"(35) 1"(25.4)
13⁄8"(35)
11⁄8"(28.5)
13⁄8"(35)
11⁄4"(32)
Keyway
“C-type”, 5 pin (6th hole provid-ed in 7185 and 7205).
Cap Finishes
· US 28 (matches FSB 0105)Aluminum Natural Color Anodized
· US 32D Satin Stainless Steel · US 10B Dark Bronze · US 3 Bright Brass
Cam Types
· SC1 (straight cam); used forall standard backset mortiselocks without a deadbolt andall narrow backset mortiselocks
· SC19 (clover cam); used for all mortise locks with adeadbolt
FSB mortise cylinders are sup-plied (keyed differently) and areavailable in the 4 finishes below.
FSB mortise cylinders may bemaster-keyed up to 4 levels upon special request.
FSB mortise cylinders are ma-chined from solid brass bar stock.Thread size is 1.15" × 32 UNS.
0423 9001 Alignment tool for proper installation of FSB Thumbturns.
Since the subroses for thumb-turns and indicators are notthrough-bolted, it is critical touse the alignment tool to markthe locations of the screws be-fore installing the subrose.
1 23⁄32" (44)
1 5⁄16" (33)
0423 9000 Alignment tool for proper installation of FSB Roses.
Proper alignment of the FSBthumbturn subrose over the hubof the mortise lock or tubularlatch is critical. Mis-alignmentof the subrose can result indead bolt malfunction once thethumb turn is snapped in place.
35
European Profile Cylinders (PZ)
8812 00xx xx = 64 (64 mm) for 13⁄8"–13⁄4"door thickness
xx = 70 (70 mm) for 2 – 21⁄4"door thickness
Key × Key
8812 01xx xx = 64 (64 mm) for 13⁄8"–13⁄4"door thickness
xx = 70 (70 mm) for 2 – 21⁄4"door thickness
Key × Thumbturn Thumbturn: Stainless Steel
Aluminum
8812 0230 Cylinder length 19⁄16" (40 mm)
1⁄2 Cylinder Thumbturn only
Thumbturn: Stainless SteelAluminum
8812 0235 Cylinder length 125⁄32" (45 mm)
1⁄2 Cylinder Thumbturn only
Thumbturn: Stainless SteelAluminum
x21⁄32"(17)
15⁄16"(33)
R19⁄32"(15)
A 11⁄4"(32)
B 11⁄4"(32)
13⁄32"(10)
x
15⁄16"(33)
A 11⁄4"(32)
B 11⁄4"(32)
11⁄2"(38)
7⁄8"(22)
A B
15⁄16"(33)
11⁄2"(38)
7⁄8"(22)
19⁄16"(40)
A = 13⁄32" (10); B = 13⁄16" (30)
A B
15⁄16"(33)
11⁄2"(38)
7⁄8"(22)
125⁄32"(45)
A = 13⁄32" (10); B = 13⁄8" (35)
Keys
Nickel plated brass, suppliedwith two keys per cylinder.
Keyway
“C-type” 5 pin on each side andare supplied keyed alike (up to20) as standard. May be masterkeyed on special request.
Cylinder Finish
Nickel plated brass only.
Thumbturn and Finishes
· 1744 turnpiece only · US 28 (matches FSB 0105)
Aluminum Natural Color Anodized
· US 32 D (matches FSB 6204)Satin Stainless Steel
Deadbolt Cylinders Multi-Point Cylinder
36
8807 8834 Single Deadbolt Cylinder
Aluminum Cap Stainless Steel Cap
8807 8835 Double Deadbolt Cylinder
Aluminum Cap Stainless Steel Cap
13⁄8"(35)
15⁄16" (23.7)
15⁄16" (23.7)
13⁄8"(35)
15⁄16" (23.7)
2 3⁄8"(60)
2 19⁄32"(66)
7⁄32"(5.5)
3⁄32" (2)
11⁄4"(31.5)
5⁄8" (15.8)
11⁄32"(25.9)
0423 0601 Tailpiece
To be used in conjunction withthumbturn inside and lever onlyoutside to create a patio set.
For these applications it isnecessary to combine ourthumb turn escutcheons with atailpiece of their own.
For several American multi-pointlocks, the locking mechanism isactivated with a flat tailpiece,which passes through the lock,that is attached to the cylinderitself. In the case of a traditionalpatio set (lever and thumbturninside and a lever only on theoutside), there is no cylinder,hence no tailpiece.
8810 0001 Rim Cylinder for US multi-pointbackplate.
Satin Nickel Plated Brass
Active Dummy Mortise Case
37
Dummy Set YL/AS
(Double Lever) Active Dummy Mortise CasePrepared as strike
For pairs of doors
SM 7100 Standard backset series
NM 7100 Narrow backset series
Federal Specifications
ANSI A 156.13, Series 1000, Grade 1, Mortise.
All Backsets
SM Series
21⁄2" (64 mm) 2 3⁄4" (70 mm) 3 3⁄4" (95 mm) 5" (127 mm) 6" (152 mm)
SM 7100 (AS) All Backsets
SM Series
21⁄2" (64 mm) 2 3⁄4" (70 mm) 3 3⁄4" (95 mm) 5" (127 mm) 6" (152 mm)
8"(203)
11⁄4"(32) x 11⁄8"
(29)
13⁄16"(30)
5⁄16"(8)
17⁄8"(48)
35⁄8"(92)
61⁄16"(154)
Operative dummy handle eitherside. Case front includes inte-grated strike and dust box to beutilized on inactive leaf.
Strike regularly supplied withcurved lip.
(ANSI Standard A 115.1)
NM Series
11⁄2" (38 mm) 13⁄4" (44 mm) 2" (51 mm) 21⁄4" (57 mm)
NM Series
11⁄2" (38 mm) 13⁄4" (44 mm) 2" (51 mm) 21⁄4" (57 mm)
Fixed Dummy Mounts for 55 mm Roses
38
0423 0200 Single dummy mount equippedwith lugs for through-bolting.
To be used in conjunction withany FSB blind rose.
0423 0400 Single dummy for surfacemount.
Without lugs.
0423 0000 Double dummy mount platewith lugs for through-bolting.
Dummy mount bar not required.
To be used with straight spindle0156 for double dummy mount.
11⁄2"(38)
5⁄16" (8)
5⁄16" (8)
11⁄16"(27)
11⁄2"(38)
5⁄16" (8)
5⁄16" (8)
11⁄16"(27)
11⁄2"(38)
5⁄16" (8)
5⁄16" (8)
0423 0100 Dummy mount bar
3⁄4" edge-bore required.
Minimum 2 1⁄8" backset, 2 3⁄8" and 2 3⁄4" as well.
When using with RG Trimplease order 0423 0100 RG.
To be used with half spindle0103 and any FSB blind rose as single mount.
To be used with straight spindle0156 for double dummy mount.
5⁄16" (8)25⁄32"(18)
A1, B1, C1
A2, B2, C225⁄32"(18)
A2 = 2 3⁄16" (55)
B2 = 2 3⁄8" (60)
C2 = 2 3⁄4" (70)
1 1⁄2" (38)
A1 = 3 11⁄32" (85)
B1 = 3 17⁄32" (90)
C1 = 3 15⁄16" (100)
Fixed Dummy Mounts for 65 mm Roses and Backplates
39
0423 0501 Half spindle for single dummymount.
Only to be used in conjunctionwith FSB 0423 0500.
For 13⁄4" to 21⁄4" door thickness,with 7 mm roses and 13⁄8" to 2"door thickness with 14 mm roses.
0423 0500 Dummy mount bar
1" edge-bore required.
For 2 3⁄8" and 2 3⁄4" backset.
0423 0700 Single dummy for surfacemounting with the 1798 (65 mm) rose.
Without lugs.
5⁄16"(8)
2 19⁄32"(66)
15⁄8" (41.5)
5⁄8"(16)
11⁄2"(38)
5⁄16" (8)
11⁄16"(27)
2 9⁄16"(65)
5⁄16" (8)
5⁄16" (8)
31⁄32"(25)
3 11⁄32" (85)
2 3⁄16" (55)31⁄32"(25)
31⁄32"(25)
115⁄32"(37)
5⁄16"(8)
115⁄32"(37) 0423 0600
Dummy mount for single ordouble application.
To be combined as retrofit itemwith escutcheon plate series1410, 1418, 1452 and 1453.
FSB has created this dummymount to clip into the back of allFSB escutcheon plates. It canbe used with a surface mountedescutcheon on one side as asingle dummy mount. While notrequired, it is always recommen -ded to through bolt to a blindescutcheon plate in these singlesided applications.
Strikes
40
SM 1001 SM Series Mortise Strike (ANSI/ASA Strike) with dustbox
x as standard = 1 1⁄4" (32 mm)
SM 1001 99 SM Series Extended Lip* Mortise Strike (ANSI/ASA Strike)with dustbox
* identify lip to center (x dimen-sion) measurement required
NM 1001 NM Series Mortise Strike (ANSI/ASA Strike) with dustbox
x as standard = 1 1⁄4" (32 mm)
NM 1001 99 NM Series Extended Lip* Mortise Strike (ANSI/ASA Strike)with dustbox
* identify lip to center (x dimen-sion) measurement required
3⁄32"(2.4)
41⁄8"(105)
11⁄16" (17.5)
11⁄4" (32)
17⁄8" (48)
47⁄8"(124)
215⁄16"(75)
33⁄8"(85.5)
1⁄4"(6.3)
x
3⁄32"(2.4)
41⁄8"(105)
11⁄16" (17.5)
11⁄4" (32)
17⁄8" (48)
47⁄8"(124)
23⁄8"(60.5)
33⁄8"(85.5)
1⁄4"(6.3)
x
Strikes
41
EM 1001 EM Series Mortise Strike without dustbox
x as standard = 1 5⁄16" (33 mm)
EM 1001 99 EM Series Extended Lip* Mortise Strike without dustbox
* identify lip to center (x dimen-sion) measurement required
HL 1001 HL Series Strike with dustbox x as standard = 1 1⁄4" (32 mm)
HL 1001 99 HL Series Extended Lip* Strikewith dustbox * identify lip to center (x dimen-
sion) measurement required
11⁄8" (29)
23⁄4"(70)
21⁄8"(54)
13⁄32"(27.5)
11⁄2"(38)
1⁄16"(1.6)
113⁄16" (46)
5⁄8" (16)
9⁄32"(7)
x
HL 1002 HL Series Strike (ANSI/ASAStrike) with dustbox
x as standard = 1 1⁄4" (32 mm)
HL 1002 99 HL Series Extended Lip* Strike(ANSI/ASA Strike) with dustbox
* identify lip to center (x dimen-sion) measurement required
3⁄32"(2.4)
41⁄8"(105)
5⁄8" (16)
11⁄4" (32)
17⁄8" (48)
47⁄8"(124)
13⁄32"(27.8)
33⁄8"(85.5)
1⁄4"(6.3)
x
611⁄16"(170)
3 1⁄16"(78)
3 1⁄16"(78)
15⁄32" (12)
111⁄32" (34)
125⁄32" (45)
25⁄32"(55)
25⁄32"(55)
1⁄16"(1.6)
1⁄4"(6.3)
x
Strikes
42
HD 1001 Strike with dustbox for HD 7020 (Heavy Duty PrivacyDeadbolt)
11⁄8" (29)
23⁄4"(70)
21⁄8"(54)
1"(25.4)
11⁄2"(38)
1⁄16"(1.6)
113⁄16" (46)
3⁄4" (19)
7⁄16"(11)
11⁄8" (29)
23⁄4"(70)
21⁄8"(54)
13⁄32"(27.8)
21⁄32" (17)
1⁄16" (1.6)
KL 1001 Strike with dustbox for KL 7050 (Knob and LeverLatch)
11⁄8" (29)
23⁄4"(70)
21⁄8"(54)
11⁄16"(27)
11⁄16" (17.5)
1⁄16" (1.6)
MD 1001 Strike with dustbox for MD 7060 (Medium Duty PrivacyDeadbolt) or KD 7070 (Keyed Deadbolt)
FSB Half Spindle and Straight Spindle
43
0156 FSB straight spindle
Straight spindles available forDT (Door Thickness) up to 3 3⁄4"(95 mm) on request.
0156 0822 5⁄16" × 3 17⁄32" (8 × 90 mm)
0156 0827 5⁄16" × 4 1⁄16" (8 × 103 mm)
0156 0830 5⁄16" × 4 11⁄32" (8 × 110 mm)
0156 0833 5⁄16" × 4 19⁄32" (8 × 117 mm)
4 1⁄16" (103)
5⁄16"(8) 13⁄4"
punch-type set screw punch-type set screw
0156 0827
2"2 1⁄4"
3 17⁄32" (90)
5⁄16"(8) 1 3⁄8" 11⁄2"
punch-type set screw punch-type set screw
0156 0822
There after fix the opposite handle over the inside end ofthe straight spindle while at thesame time pressing the alreadyfitted handle against that face ofthe door. Tighten punch-type setscrew until the spring plate ispierced. This screw should nowbe lying flush with the surfaceof the handle as shown on theleft page.
3. Once the lever handle set has been fitted, test the actionseveral times by opening andclosing the door.The lock springis designed to return the handleto the horizontal position afteroperation. If the handle worksstiffly, the fixing process shouldbe repeated replacing or revers-ing the spindle’s spring plate.
Installation Instructions for
FSB Straight Spindles (0156)
1. Once the lock or latch hasbeen properly fitted, remove thepunch-type set screw from anFSB lever handle, insert the pinend of the FSB straight spindleup to the marking for the appro-priate door thickness (DT), re-place the set screw with thepin-type set screw provided withthe straight spindle and tightenuntil the head of the set screwis lying flush with the surface ofthe handle shank.
Note: Ensure that the spring
plate is in the same orientation
as the initial set screw, facing
out toward the leading edge of
the door, to receive the opposite
lever and punch-type set screw.
2. Firmly insert the FSB leverhandle with spindle attachedthrough the hub of the lock.
0103 FSB half spindle
0103 0808 5⁄16" × 2 3⁄16" (8 × 55 mm)
0103 0812 5⁄16" × 2 9⁄16" (8 × 65 mm)
0103 0816 5⁄16" × 2 15⁄16" (8 × 75 mm)
When ordering a standard FSBlockset or latchset, provide theappropriate door thick ness toget the correct spindle length.To select the appropriate spindleseparately please consult thespindle charts on the next page.
FSB Swivel Spindle
44
0157 FSB swivel spindle
Swivel spindles available for DT(Door Thickness) up to 3 3⁄4"(95 mm) on request.
0157 0824 5⁄16" × 3 25⁄32" (8 × 96 mm)
0157 0830 5⁄16" × 4 11⁄32" (8 × 110 mm)
0157 0834 5⁄16" × 4 25⁄32" (8 × 120 mm)
For use with 14 mm thick roses 1799
DT Swivel Straight Half
13⁄8" 0157 0824 0156 0830 0103 0812 11⁄2" 0157 0824 0156 0830 0103 0812 13⁄4" 0157 0830 0156 0830 0103 0812 2" 0157 0830 0156 0833 0103 0816 21⁄4" 0157 0834 0156 0833 0103 0816
For use with 7 mm thick roses 1707, 1731, 1758 and 1798
DT Swivel Straight Half
13⁄8" 0157 0824 0156 0822 0103 0808 11⁄2" 0157 0824 0156 0822 0103 0808 13⁄4" 0157 0824 0156 0827 0103 0812 2" 0157 0830 0156 0827 0103 0812 21⁄4" 0157 0830 0156 0827 0103 0812
5⁄16"(8)
0157 0824
115⁄32" (37)
1 7⁄8" (48) 1 7⁄8" (48)
5⁄16"(8)
0157 0830
1 3⁄4" (44)
2 3⁄16" (55) 2 3⁄16" (55)
Installation instructions for
FSB swivel spindles (0157)
1. Once the lock or latch hasbeen properly fitted, guide theswivel spindle from outside untilthe washer stops the insert ionmovement, allowing for thespindle to fully engage the FSBmortise lock or tubular latch case.This is a security precautionand allows both spring plat es tobe optimally located to receivethe set screws of both handles.
Note: Ensure that both spring
plates are in the same orienta -
tion and facing out toward the
leading edge of the door, to re-
ceive the punch-type set screws.
2. Then, having attached theroses, fit the outside handle overthe outside end of the swivelspindle and firmly tighten thepunch-type set screw until thespring plate is pierced. The screwshould now be lying flush withthe surface of the handle shank.
When ordering a standard FSBlockset or latchset, provide theappropriate door thick ness toget the correct spindle length.To select the appropriate spindleseparately please consult thespindle charts to the right.
3. Now firmly press the otherhandle over the inside end of theswivel spindle while at the sametime pressing the already fittedhandle against that face of thedoor. Tighten punch-type setscrew as for other side.
4. Once the lever handle set has been fitted, test the actionseveral times by opening andclosing the door. The lock springis designed to return the handleto the horizontal position afteroperation. If the handle worksstiffly, the fixing process shouldbe repeated replacing or revers-ing the spindle’s spring plate.
Important note: Prior to insert-
ing swivel spindle into any lock
or latch, ensure that both spin-
dle parts are separated by at
least one rotation.
FSB One Sided Spindle For European Mortise Lock
45
X
Dimension X
0115 0810 5⁄16" × 2 3⁄8" (8 × 60 mm), 25⁄32" – 15⁄16" (20 – 24 mm)
0115 0812 5⁄16" × 2 9⁄16" (8 × 65 mm), 31⁄32" –15⁄32" (25 – 29 mm)
0115 0814 5⁄16" × 2 3⁄4" (8 × 70 mm), 13⁄16" –111⁄32" (30 – 34 mm)
0115 0816 5⁄16" × 2 15⁄16" (8 × 75 mm), 13⁄8" –117⁄32" (35 – 39 mm)
0115 0818 5⁄16" × 3 5⁄32" (8 × 80 mm), 119⁄32" –15⁄8" (40 – 44 mm)
0115 FSB one sided spindle for doors drilled on one side
In choosing the correct FSB stabil-half-spindle, use themeasurement of X as an aid.The measurement of X is thedistance between the outer rimof the bushing of the backplatesor roses and the lock follower.
0402 Set screw with piercing punch
0402 0601 M6 1⁄4" × 5⁄16" (8,0) 0402 0602 M6 1⁄4" × 11⁄32" (9,0) 0402 0603 M6 1⁄4" × 13⁄32" (10,5) 0402 0604 M6 1⁄4" × 7⁄16" (11,5)
25
20
0406 Spring plate
0406 2508 31⁄32" (25 mm) 0406 2008 25⁄32" (20 mm)
0442 50 FSB stabil-blind-spindle
5⁄16" × 2 15⁄16" (8 × 75 mm), suitable for door thickness113⁄32" to 125⁄32" (36 to 45 mm)
Spindles Accessories
46
0172 0810 5⁄16" × 2 3⁄8" (8 × 60 mm) 0172 0814 5⁄16" × 2 3⁄4" (8 × 70 mm) 0172 0818 5⁄16" × 3 5⁄32" (8 × 80 mm) 0172 0822 5⁄16" × 3 17⁄32" (8 × 90 mm) 0172 0826 5⁄16" × 3 15⁄16" (8 × 100 mm) 0172 0830 5⁄16" × 4 11⁄32" (8 × 110 mm) 0172 0834 5⁄16" × 4 25⁄32" (8 × 120 mm) 0172 0838 5⁄16" × 5 1⁄8" (8 × 130 mm) 0172 0842 5⁄16" × 5 1⁄2" (8 × 140 mm) 0172 0846 5⁄16" × 5 29⁄32" (8 × 150 mm) 0172 0850 5⁄16" × 6 5⁄16" (8 × 160 mm)
0425 Adaptor sleeve for lever handles spindles /lockfollower
0172 Solid Δ-spindles 5⁄16" (8 mm)
0440 Lever handle distance rose toincrease the distance betweendoor and lever handle
Aluminum Stainles Steel (25⁄32" only)
0440 20 25⁄32" (20 mm) 0440 25 31⁄32" (25 mm) 0440 30 13⁄16" (30 mm)
0441 Blind rose to blank out the lever handlehole on escutcheon plates
Aluminum
0425 0809 5⁄16" on 11⁄32" (8 on 9.0 mm)
0425 0810 5⁄16" on 13⁄32" (8 on 10.0 mm)
0425 0910 11⁄32" on 13⁄32" (9 on 10.0 mm)
0425 0885 5⁄16" on 11⁄32" (8 on 8.5 mm)
0526 Threaded rivets for metal doors.
M5 3⁄16" × 31⁄32" (25 mm)
To be used with narrow style rose 1758.
Screws
47
0313 Mounting posts for pull handles
0313 0670 M6 1⁄4" × 2 3⁄4" (70 mm) 0313 0680 M6 1⁄4" × 3 5⁄32" (80 mm) 0313 0880 M8 5⁄16" × 3 5⁄32" (80 mm)
0302 Galvanized Steel Lens Head Tapping Screw
0315 Cross recessed metal screw
0315 2916 1⁄8" × 5⁄8" (2.9 × 16 mm) 0315 3916 5⁄32" × 5⁄8" (3.9 × 16 mm) 0315 4219 5⁄32" × 3⁄4" (4.2 × 19 mm)
for door thickness
0308 0555 M5 3⁄16" × 2 3⁄16" 127⁄32" – 2 7⁄32" 0308 0565 M5 3⁄16" × 2 9⁄16" 2 1⁄4" – 2 19⁄32" 0308 0575 M5 3⁄16" × 2 15⁄16" 2 5⁄8" – 3" 0308 0585 M5 3⁄16" × 3 11⁄32" 3 1⁄32" – 3 3⁄8" 0308 0595 M5 3⁄16" × 3 3⁄4" 3 7⁄16" – 3 25⁄32" 0308 0501 M5 3⁄16" × 4 1⁄8" 3 13⁄16" – 4 5⁄32"
0308 Cross countersunk head srewsfor back-to-back fixing knobs(Items-No. 23xx 06), for doorthickness up to 127⁄32" (47 mm).
0309 Sex bolts with M4 5⁄32" threadedsleeve nut 0309
0303 Cross recessed raised countersunk oval head bolt
0303 0515 M5 3⁄16" × 19⁄32" (15 mm)
0303 0535 M5 3⁄16" × 13⁄8" (35 mm)
Bolt Adjustable For door length between thickness
0309 0435 13⁄8" 115⁄32" – 125⁄32" 31⁄32" – 15⁄16" 0309 0440 119⁄32" 121⁄32" – 131⁄32" 13⁄16" – 11⁄2" 0309 0445 125⁄32" 127⁄32" – 2 3⁄16" 13⁄8" – 111⁄16" 0309 0450 131⁄32" 2 1⁄16" – 2 3⁄8" 119⁄32" – 17⁄8" 0309 0455 2 3⁄16" 2 1⁄4" – 2 9⁄16" 125⁄32" – 2 3⁄32" 0309 0460 2 3⁄8" 2 7⁄16" – 2 3⁄4" 131⁄32" – 2 9⁄32"
Adjustable between
Bolt length
0302 4240 5⁄32" × 119⁄32" (4.2 × 40 mm) 0302 4245 5⁄32" × 125⁄32" (4.2 × 45 mm) 0302 4250 5⁄32" × 1 31⁄32" (4.2 × 50 mm) 0302 4255 5⁄32" × 2 3⁄16" (4.2 × 55 mm) 0302 4260 5⁄32" × 2 3⁄8" (4.2 × 60 mm) 0302 4265 5⁄32" × 2 9⁄16" (4.2 × 65 mm) 0302 4270 5⁄32" × 2 3⁄4" (4.2 × 70 mm) 0302 4280 5⁄32" × 3 5⁄32" (4.2 × 80 mm)
Numerical Index
48
Number . . . . . . Page
0103 . . . . . . . . . 38, 43, 440115 . . . . . . . . . 450156 . . . . . . . . . 38, 43, 440157 . . . . . . . . . 44
0172 . . . . . . . . . 460302 . . . . . . . . . 470303 . . . . . . . . . 470308 . . . . . . . . . 47
0309 . . . . . . . . . 470313 . . . . . . . . . 470315 . . . . . . . . . 470402 . . . . . . . . . 45
0406 . . . . . . . . . 450423 0000 . . . . . 380423 0100 . . . . 38 0423 0200 . . . . . 38
0423 0400 . . . . . 380423 0500 . . . . . 390423 0501 . . . . . 390423 0600 . . . . . 39
0423 0601 . . . . . 36 0423 0700 . . . . . 39 0423 9000 . . . . 34 0423 9001 . . . . 34
0425 . . . . . . . . . 460440 . . . . . . . . . 460441 . . . . . . . . . 460442 . . . . . . . . . 45
0526 . . . . . . . . . 46
Number . . . . . . Page
8806 7165 . . . . . 348806 7185 . . . . . 348806 7205 . . . . . 348807 8834 . . . . . 36
8807 8835 . . . . . 368810 0001 . . . . . 368812 0064 . . . . . 358812 0070 . . . . . 35
8812 0164 . . . . . 358812 0170 . . . . . 358812 0230 . . . . . 358812 0235 . . . . . 35
Number . . . . . . Page
EM 0001 . . . . . . 7, 18EM 0002 . . . . . . 7, 18EM 0003 . . . . . . 7, 18EM 0004 . . . . . . 7, 19
EM 1001 . . . . . . 41EM 1001 99 . . . . 41
HD 1001 . . . . . . 42HD 7020 . . . . . . 7, 28, 29
HL 1001 . . . . . . 41HL 1001 99 . . . . 41HL 1002 . . . . . . 41 HL 1002 99 . . . . 41
HL 7010 . . . . . . 7, 20, 21
KD 7070 . . . . . . 7, 32, 33, 42
KL 1001 . . . . . . 42 KL 7050 . . . . . . 7, 26, 27
MD 1001 . . . . . . 42MD 7060 . . . . . . 7, 30, 31, 42
ML 7030 . . . . . . 7, 22, 23ML 7040 . . . . . . 7, 24, 25ML 7041 . . . . . . 24, 25
Number . . . . . . Page
NM 1001 . . . . . 40NM 1001 99. . . . 40NM 7100 . . . . . . 37NM 7122 . . . . . . 7, 15
NM 7124 . . . . . . 7, 15NM 7125 . . . . . . 7, 15NM 7142 . . . . . . 7, 16NM 7145 . . . . . . 7, 16
NM 7148 . . . . . . 7, 16NM 7156 . . . . . . 7, 16NM 7159 . . . . . . 7, 16NM 7181 . . . . . . 7, 16
SM 1001 . . . . . . 40SM 1001 99 . . . . 40SM 7100 . . . . . . 37SM 7100 AS . . . . 37
SM 7122 . . . . . . 7, 8SM 7124 . . . . . . 7, 8SM 7125 . . . . . . 7, 8SM 7134 . . . . . . 7, 9
SM 7142 . . . . . . 7, 9SM 7145 . . . . . . 7, 9SM 7148 . . . . . . 7, 9SM 7156 . . . . . . 7, 9
SM 7159 . . . . . . 7, 9SM 7159 EL . . . . 7, 10, 12, 13,
14 SM 7159 EU. . . . 7, 10, 12, 13,
14
SM 7167 . . . . . . 7, 10SM 7181 . . . . . . 7, 10
C
M
Y
CM
MY
CY
CMY
K
components.pdf 8/22/08 3:22:50 PM