Post on 16-Oct-2019
Power and productivity
for a better worldTM
800xA for AC 100 Aspect Object Types
System Version 6.0
800xA for AC 100
Aspect Object Types
System Version 6.0
NOTICEThis document contains information about one or more ABB products and may include a description of or a reference to one or more standards that may be generally relevant to the ABB products. The presence of any such description of a standard or reference to a standard is not a representation that all of the ABB products referenced in this document support all of the features of the described or referenced standard. In order to determine the specific features supported by a particular ABB product, the reader should consult the product specifications for the particular ABB product.
ABB may have one or more patents or pending patent applications protecting the intel-lectual property in the ABB products described in this document.
The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, nor shall ABB be liable for incidental or consequential damages arising from use of any software or hard-ware described in this document.
This document and parts thereof must not be reproduced or copied without written per-mission from ABB, and the contents thereof must not be imparted to a third party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license. This product meets the requirements specified in EMC Directive 2004/108/EC and in Low Volt-age Directive 2006/95/EC.
TRADEMARKSAll rights to copyrights, registered trademarks, and trademarks reside with their respec-tive owners.
Copyright © 2003-2014 by ABB. All rights reserved.
Release: August 2014 Document number: 3BDS013986-600
3BDS013986-600 5
Table of Contents
About This User ManualGeneral ............................................................................................................................11
User Manual Conventions ...............................................................................................12
Feature Pack .........................................................................................................12
Warning, Caution, Information, and Tip Icons ....................................................13
Terminology.....................................................................................................................14
Released User Manuals and Release Notes.....................................................................19
Section 1 - Aspect Object Types and their AspectsAC 100 Aspect Object Types Overview..........................................................................23
General Aspect Overview................................................................................................26
Detailed Aspect Overview...............................................................................................27
Name Aspect ...................................................................................................................32
Faceplate Aspect..............................................................................................................33
AlarmControl .......................................................................................................33
Pin Button.............................................................................................................35
Control Connection Aspect Properties ............................................................................35
Alarm and Event List Aspect...........................................................................................52
Section 2 - AC 100 Aspect Object Types in DetailAnalog Input AIS ............................................................................................................58
Faceplate .............................................................................................................58
Control and Reduced Control...............................................................................60
Limits .............................................................................................................64
Block .............................................................................................................66
Object Display......................................................................................................67
Table of Contents
6 3BDS013986-600
NumericMV01 ..................................................................................................... 73
UnitMV01............................................................................................................ 74
BargraphMV01 .................................................................................................... 75
Object Icon........................................................................................................... 78
Analog Output AOS ........................................................................................................ 79
Faceplate ............................................................................................................ 79
Control and Reduced Control .............................................................................. 81
Block ............................................................................................................ 83
Object Display ..................................................................................................... 84
NumericOUT01 ................................................................................................... 89
UnitOUT01 .......................................................................................................... 90
BargraphOUT01 .................................................................................................. 91
Object Icon........................................................................................................... 93
Digital Input DIS............................................................................................................. 94
Faceplate ............................................................................................................ 94
Control and Reduced Control .............................................................................. 96
Block ............................................................................................................ 98
Object Display ..................................................................................................... 99
IndicatorBox01 .................................................................................................. 103
Object Icon......................................................................................................... 104
Digital Output DOS....................................................................................................... 105
Faceplate .......................................................................................................... 105
Control and Reduced Control ............................................................................ 107
Block .......................................................................................................... 109
Object Display ................................................................................................... 110
IndicatorBox01 .................................................................................................. 113
Object Icon......................................................................................................... 114
Analog Input DAT_AI................................................................................................... 115
Faceplate .......................................................................................................... 115
Control and Reduced Control ............................................................................ 117
Object Display ................................................................................................... 119
NumericMV01 ................................................................................................... 122
Table of Contents
3BDS013986-600 7
3BDS013986-600 7
UnitMV01 ..........................................................................................................123
BargraphMV01...................................................................................................124
Object Icon .........................................................................................................125
Analog Output DAT_AO ...............................................................................................126
Faceplate ...........................................................................................................126
Control and Reduced Control.............................................................................128
Object Display....................................................................................................130
NumericOUT01..................................................................................................132
UnitOUT01 ........................................................................................................133
BargraphOUT01.................................................................................................134
Object Icon .........................................................................................................135
Digital Input DAT_DI....................................................................................................136
Faceplate ...........................................................................................................136
Control and Reduced Control.............................................................................138
Object Display....................................................................................................140
IndicatorBox01...................................................................................................143
Digital Output DAT_DO................................................................................................145
Faceplate ...........................................................................................................145
Control and Reduced Control.............................................................................147
Object Display....................................................................................................149
IndicatorBox01...................................................................................................151
Object Icon .........................................................................................................152
Calculated Data DAT_DAT ...........................................................................................152
Faceplate ...........................................................................................................152
Control and Reduced Control.............................................................................154
Numeric01..........................................................................................................155
Object Icon .........................................................................................................156
Boolean Calculated Data MB........................................................................................156
Faceplate ...........................................................................................................156
Control and Reduced Control.............................................................................157
Numeric01..........................................................................................................158
Object Icon .........................................................................................................159
Table of Contents
8 3BDS013986-600
Calculated Boolean Signal Data MBS .......................................................................... 160
Faceplate .......................................................................................................... 160
Control and Reduced Control ............................................................................ 162
Object Display ................................................................................................... 164
IndicatorBox01 .................................................................................................. 167
Object Icon......................................................................................................... 168
Calculated Integer Data MI ........................................................................................... 168
Faceplate .......................................................................................................... 168
Control and Reduced Control ............................................................................ 169
Numeric01 ......................................................................................................... 170
Unit .......................................................................................................... 171
Object Icon......................................................................................................... 172
Calculated IntegerLong Data MIL ................................................................................ 173
Faceplate .......................................................................................................... 173
Control and Reduced Control ............................................................................ 174
Numeric01 ......................................................................................................... 175
Unit .......................................................................................................... 177
Object Icon......................................................................................................... 177
Calculated Real Data MR.............................................................................................. 178
Faceplate .......................................................................................................... 178
Control and Reduced Control ............................................................................ 179
Numeric01 ......................................................................................................... 180
Unit .......................................................................................................... 182
Object icon ......................................................................................................... 182
Signal ‘Group’ Objects AIS Group, ... .......................................................................... 183
Object Icon......................................................................................................... 184
AF100 Network............................................................................................................. 185
List of Aspects ................................................................................................... 185
Object Icon......................................................................................................... 186
AF100 TestNetwork ...................................................................................................... 186
Object Icon......................................................................................................... 186
AF100 Station ............................................................................................................... 186
Table of Contents
3BDS013986-600 9
3BDS013986-600 9
Object Icon .........................................................................................................186
Station Status Group......................................................................................................187
Object Icon .........................................................................................................187
AF100 CI Summary ......................................................................................................187
Object Icon .........................................................................................................187
IO CI Summary .............................................................................................................188
Object Icon .........................................................................................................188
PM Summary.................................................................................................................188
Object Icon .........................................................................................................188
Basic Station Group.......................................................................................................188
Object Icon .........................................................................................................188
AF100 Communication Board CI .................................................................................189
Object Icon .........................................................................................................189
Processor Module ..........................................................................................................189
Object Icon .........................................................................................................189
OPC ............................................................................................................................189
Object Icon .........................................................................................................190
Index
Table of Contents
10 3BDS013986-600
3BDS013986-600 11
About This User Manual
General
Any security measures described in this User Manual, for example, for user access, password security, network security, firewalls, virus protection, etc., represent possible steps that a user of an 800xA System may want to consider based on a risk assessment for a particular application and installation. This risk assessment, as well as the proper implementation, configuration, installation, operation, administration, and maintenance of all relevant security related equipment, software, and procedures, are the responsibility of the user of the 800xA System.
800xA for AC 100 consists of:
• AC 100 OPC Server a standard OPC Server for access to control systems based on Advant Controller 100 Series
• 800xA for AC 100 Software the software necessary to connect AC 100 OPC Server to ABB’s System 800xA.
Delivered with 800xA for AC 100 are Aspect Object Types according to the following subdivision:
• Signal Object Types for the Advant Controllers 100 Series
– Standard Signal Object Types AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO
– Calculated Data Object Types MB, MBS, MI, MIL, MR, DAT_DAT
User Manual Conventions About This User Manual
12 3BDS013986-600
• (Control) System Status Object Types for the Advant 100 Controller Series AF100 (Test) Network, AF100 Station, Station Status Group, AF100 CI Summary, IO CI Summary, PM Summary, Basic Station Group, AF100 CI, Processor Module, OPC Some of them additionally represent control system structures like Bus, Station or Basic Station.
• Grouping Object Types for the Advant 100 Controller Series AIS Group, AOS Group, DIS Group, DOS Group, DAT_AI Group, DAT_AO Group, DAT_DI Group, DAT_DO Group, MB Group, MBS Group, MI Group, MIL, MR Group, DAT_DAT Group These objects provide a grouping of the AC 100 Aspect Objects within the Control Structure.
For a complete list of all supported AC 100 Aspect Object Types please refer to Section 2, AC 100 Aspect Object Types in Detail.
Most of the object types contain the following default aspects:
• Control Connection Aspect
• Display Element Aspects
– Faceplate Elements (--> process dialogs)
– Graphical Elements
• An Icon Aspect.
This book is focused on describing the display elements and object icons.
User Manual ConventionsMicrosoft Windows conventions are normally used for the standard presentation of material when entering text, key sequences, prompts, messages, menu items, screen elements, etc.
Feature Pack
The Feature Pack content (including text, tables, and figures) included in this User Manual is distinguished from the existing content using the following two separators:
About This User Manual Warning, Caution, Information, and Tip Icons
3BDS013986-600 13
Feature Pack Functionality ______________________________________________________________________
<Feature Pack Content>
___________________________________________________________________________________________
Feature Pack functionality included in an existing table is indicated using a table footnote (*) :*Feature Pack Functionality
Feature Pack functionality in an existing figure is indicated using callouts.
Unless noted, all other information in this User Manual applies to 800xA Systems with or without a Feature Pack installed.
Warning, Caution, Information, and Tip Icons
This User Manual includes Warning, Caution, and Information where appropriate to point out safety related or other important information. It also includes Tip to point out useful hints to the reader. The corresponding symbols should be interpreted as follows:
Although Warning hazards are related to personal injury, and Caution hazards are associated with equipment or property damage, it should be understood that operation of damaged equipment could, under certain operational conditions, result
Electrical warning icon indicates the presence of a hazard which could result in electrical shock.
Warning icon indicates the presence of a hazard which could result in personal injury.
Caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment/property.
Information icon alerts the reader to pertinent facts and conditions.
Tip icon indicates advice on, for example, how to design your project or how to use a certain function
Terminology About This User Manual
14 3BDS013986-600
in degraded process performance leading to personal injury or death. Therefore, fully comply with all Warning and Caution notices.
TerminologyA complete and comprehensive list of terms is included in System 800xA System Guide Functional Description (3BSE038018*). The listing includes terms and definitions that apply to the 800xA System where the usage is different from commonly accepted industry standard definitions and definitions given in standard dictionaries such as Webster’s Dictionary of Computer Terms. Terms that uniquely apply to this User Manual are listed in the following table.
Term/Acronym Description
Graphics element A graphic aspect that has a reference to an Aspect Object. Normally a part of a graphic display. A graphical object is typically built up from several subelements and/or primitive elements. Some graphic elements are provided by ABB, while others may be built by the user.
graphic element 1
Examples of Graphic Elements provided by ABB:
81.4 M/MIN
ValueField Bar Hscale
100.00.0
About This User Manual Terminology
3BDS013986-600 15
Primitive elements A simple graphic element, for example a rectangle or a polygon.
Subelements A graphic element composed of primitive elements, for example a bar with limits where the limits and the bar are separate primitive elements.
Graphic element browser
A tool used to select object aware (graphic) elements in Graphics Builder.
Graphic expression Graphic expression is used to specify a data subscrip-tion and a relationship between process data and data to be displayed.
Graphic libraries Libraries of primitive elements, and standard graphic elements, for example process dialog, object display and close-up.
Term/Acronym Description
Terminology About This User Manual
16 3BDS013986-600
General Terms
Term/Acronym Description
AC Advant Controller, the common term for the series of controllers used in ABB automation systems, for example AC 160, AC 110.
ACC AMPL Control Configuration. See CBA below.
Advant OCS The term refers to one or more of the open control systems from ABB, i.e., ABB Advant, ABB Master and ABB MOD 300.
AF100 Advant Fieldbus 100. AF100 is a high speed communication link intended for communication between controllers in the AC 400 and AC 100 series and other equipment adapted for the bus. The transmission rate is 1.5 Mbit/s and it supports three transmission media: twisted pair, coaxial and optical media.
AMPL ABB Master® Programming Language. A function-block language with graphic representation which is especially developed for process control applications.
APB Application Builder. The software module in CBA used to handle projects, nodes, circuits and type circuits.
APC Application Controller, a control unit used for motor drives, and so on.
BCB Bus Configuration Builder. The software module in CBA used to create and maintain the Bus Configuration Database.
BCD Bus Configuration Database contains configuration data of nodes and busses on the AF100 network belonging to a project. The BCD is created and maintained with the CBA software and read by the OPC Server at start-up. File suffix is MDB.
About This User Manual Terminology
3BDS013986-600 17
BCI Bus Configuration Interface. Internal interface to the Bus Configuration Database for the AC 100 OPC Server. Implemented according to Microsofts’s Component Object Model (COM).
CBA Control Builder A. Application building software for Advant Controller 100 and 400 series. Replaces the AMPL CC software. Comprises Application Builder (APB), Function Chart Builder (FCB), and Bus Configuration Builder (BCB)
CI Communication Interface
CI Board A CI board is a Communication Interface Board, used to connect a PC to the Advant Fieldbus 100 bus.
Client Application A client application is an application which subscribes for data and/or sends commands to objects in the automation system.
Clock Master A clock master is a device which distributes time on the bus to
synchronize clocks in nodes on the Advant Fieldbus 100.
COM Component Object Model, a specification that defines how individual software components can interact and share data under Windows. Developed by Microsoft.
DAT Based Objects Object types with, compared with the Extended DB Elements, limited object support.
DCOM Distributed COM. Extends COM to networks.
DSP DataSet Peripheral, a block of data to be transmitted on Advant Fieldbus 100. In the controller the DataSet Peripheral is represented with a database element.
ESD Electrostatic Discharge.
EVS Event Sets, the object type for transmitting time tagged events on the Advant Fieldbus 100 network.
Term/Acronym Description
Terminology About This User Manual
18 3BDS013986-600
Extended DB Elements These object types offer complete support for the different object attributes.
FCB Function Chart Builder, the graphic configuration and programming tool in CBA.
Function Chart A function chart is a diagram for the representation of process control programs. It contains graphical symbols (rectangles) for PC elements and lines for connections between element terminals.
HMI
HSI
Human Machine Interface.
Human System Interface.
LED Light Emitting Diode. LEDs are often used as indicators on control panels.
Object (Process) Object (Process) is a physical or calculated process object, or a functional unit or type circuit containing all related inputs and outputs. An example of a process object is an analog input including value, limits, status, etc. There are two kinds of objects, Extended DB Elements and DAT based objects
MMI Man Machine Interface.
OPC OLE for Process Control.
OS Operator Station, a station with operator interactive functionality.
PC An abbreviation for both personal computer and process controller.
PC element PC element is an abbreviation for process control element, which is part of a process control program. PC elements are represented by rectangles in a function chart and by corresponding callnames in a tree diagram
PCI Personal Computer Interface bus. Standard PC bus.
PC program PC program is an abbreviation for process control program.
Term/Acronym Description
About This User Manual Released User Manuals and Release Notes
3BDS013986-600 19
Released User Manuals and Release NotesA complete list of all User Manuals and Release Notes applicable to System 800xA is provided in System 800xA Released User Manuals and Release Notes (3BUA000263*).
System 800xA Released User Manuals and Release Notes (3BUA000263*) is updated each time a document is updated or a new document is released. It is in pdf format and is provided in the following ways:
• Included on the documentation media provided with the system and published to ABB SolutionsBank when released as part of a major or minor release, Service Pack, Feature Pack, or System Revision.
• Published to ABB SolutionsBank when a User Manual or Release Note is updated in between any of the release cycles listed in the first bullet.
A product bulletin is published each time System 800xA Released User Manuals and Release Notes (3BUA000263*) is updated and published to ABB SolutionsBank.
PCPGM Program header, a PC element.
SDP Service Data Protocol used to send messages on the Advant Fieldbus 100 network.
XDB Extended DB Elements (AIS, AOS, DIS, DOS, MB, MBS, MI, MIL, MR)
Category Title Description
Hardware Advant Fieldbus 100 User’s Guide (3BSE000506*)
Describes how to use the AF100 Network. It also provides a technical description of communication boards and modems available.
Term/Acronym Description
Released User Manuals and Release Notes About This User Manual
20 3BDS013986-600
Installation System 800xA Installation and Upgrade Getting Started (2PAA111708*)
Describes installation of the System 800xA.
Advant OCS, Control Builder A, Installation (3BDS013836*)
Describes how to install Control Builder A.
Software 800xA for AC 100 OPC Server, Configuration and Operation (3BDS013988*)
Describes how you can configure and use AC 100 OPC Server.
800xA for AC 100, Configuration and Operation (3BDS013989*)
Describes how you can configure and use 800xA for AC 100.
System 800xA, 800xA for AC 100, Aspect Object Types Reference Manual (3BDS013986*)
Describes how you can configure and use 800xA for AC 100 (this manual).
System 800xA Configuration (3BDS011222*)
Describes configuration of System 800xA.
System 800xA Operation (3BSE036904*)
Describes operation of System 800xA.
System 800xA Engineering Process Graphics (3BSE049230*)
Describes the configuration of process graphics in System 800xA.
System 800xA Operations Operator Workplace Configuration (3BSE030322*)
Describes the configuration and maintenance of System 800xA.
Application Builder User’s Guide (3BDS100560*)
Describes installation of Control Builder A components and contains the operation instruction of Application Builder.
Bus Configuration Builder User’s Guide (3BDS100312*)
Describes bus configuration support functions for Advant Fieldbus 100.
Function Chart Builder User’s Guide (3BDS100595*)
Describes how Function Chart Builder can be used to configure different target systems.
Category Title Description
About This User Manual Released User Manuals and Release Notes
3BDS013986-600 21
Software AMPL Configuration Advant Controller 100 Series Ref. Manual (3BSE009626*)
Contains instructions about configu-ration and application programming, fault tracing and maintenance of Advant Controller 160/110/70.
PC Elements Advant Controller 160 Series Ref. Manual (3BDS005557*)
PC Elements Advant Controller 110 Series Ref. Manual (3BSE000504*)
PC Elements Advant Controller 70 Series Ref. Manual (3BSE009177*)
Contain instructions and the data sheets for all PC Elements available for Advant Controller 160/110/70.
Data Base Elements Advant Controller 160 Reference Manual (3BDS005556*)
Data Base Elements Advant Controller 110 Reference Manual (3BDS100594*)
Data Base Elements Advant Controller 70 Reference Manual (3BDS100593*)
Contain instructions and the data sheets for all data base elements available for Advant Controller 160/110/70.
Category Title Description
Released User Manuals and Release Notes About This User Manual
22 3BDS013986-600
3BDS013986-600 23
Section 1 Aspect Object Types and their Aspects
AC 100 Aspect Object Types OverviewThe Aspect Object Types supported by 800xA for AC 100 consist of the components listed below.
Signal Object Types for Advant Controllers 100 Series
Signal Object Types represent signals from input/output channels but can also be used for calculated data. The delivered graphic elements are adapted to the different capabilities of the object types.
• Standard Signal Object Types, XDB-based represent analog and digital, input and output data and stem from Extended DB Elements configured in the AC 100 Series Controller. Extended support for status supervision, alarm and event generation, limit treatment and operator interaction is built-in.
– Analog Input AC 100 AIS
– Analog Output AC 100 AOS
– Digital Input AC 100 DIS
– Digital Output AC 100 DOS
• Standard Signal Object Types, DAT-based represent analog and digital, input and output data and stem from MMI (DAT-based) DB Elements configured in the AC 100 Series Controller. Compared to XDB-based elements they have limited functionality and require additional configuration effort in the controller.
AC 100 Aspect Object Types Overview Section 1 Aspect Object Types and their Aspects
24 3BDS013986-600
– Analog Input AC 100 DAT_AI
– Analog Output AC 100 DAT_AO
– Digital Input AC 100 DAT_DI
– Digital Output AC 100 DAT_DO
• Calculated Data Object Types, XDB-based represent calculated data and stem from Extended DB Elements configured in the AC 100 Series Controller. Extended support for status supervision, alarm and event generation and operator interaction is built-in.
– Boolean Data AC 100 MB and Boolean Value AC 100 MBS
– Integer Data AC 100 MI
– Integer Long Data AC 100 MIL
– Real Data AC 100 MR
• Calculated Data Object Type, DAT-based represents calculated data and stems from a so called MMI (DAT-based) DB Element configured in the AC 100 Series Controller. This element may represent different data types and requires additional configuration effort in the controller.
– Data AC 100 DAT_DAT
• Signal and Calculated Data Grouping Object Types provide a grouping of the related AC 100 Aspect Objects without any extra functionality. Supported are
– AC 100 AIS / AOS / DIS / DOS Group
– AC 100 DAT_AI / DAT_AO / DAT_DI / DAT_DO Group
– AC 100 MB / MBS / MI / MIL / MRGroup
– AC 100 DAT_DAT Group
Section 1 Aspect Object Types and their Aspects AC 100 Aspect Object Types Overview
3BDS013986-600 25
Control System Status Object Types for Advant 100 Controller Series
Control System Status Object Types represent the status of hardware and software elements in the control system.
• AF100 Structure Object Types represent Advant Fieldbus 100 Networks and Stations. They give a control system status overview and define the superordinated structures within the Control Structure.
– AF100 Network Object. AC 100 AF100 Network
– AF100 TestNetwork Object. AC 100 AF100 TestNetwork
– AF100 Station Object. AC 100 AF100 Station
• Summary Status Object Types provide an overview of all modules of the same category within one station.
– Station Summary Group Object AC 100 Station Status Group
– AF100 Communication Module Summary AC 100 AF100 CI Summary
– Input/Output and CI Module Summary AC 100 IO CI Summary
– Processor Module Summary AC 100 PM Summary
• Single Module Status Object Types provide the status of the different modules within the basic station
– Single Module Group Object AC 100 Basic Station Group
– AF100 Communication Board AC 100 AF100 CI
– Processor Module AC 100 Processor Module
– AC 100 OPC Server or AdvaSoft 1.x station AC 100 OPC
General Aspect Overview Section 1 Aspect Object Types and their Aspects
26 3BDS013986-600
General Aspect OverviewEach of the 800xA for AC 100 Signal and System Status Aspect Objects (except Grouping Objects) contain the following default aspects:
• The Control Connection Aspects contains the following attributes– The name, data type, permission (read/write) and subscription update rate
of each attribute.– A user interface to inspect the object type attribute information. It can also
be used to subscribe for the current value of each attribute.
• A number of display element aspects (Faceplate elements where relevant and a number of additional graphical presentations).
• A Faceplate aspect (except for System Status Objects) can be used to view and change the object value. The Faceplate can be viewed in three different modes, normal, reduced and extended. Depending on the mode different amounts of information and options are displayed in the Faceplate.
• An Icon Aspect.
The standard signal object types AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI and DAT_DO also include additional aspects such as:
• An Alarm List aspect (for the instantiated object). This aspect shows alarms that are generated in the system, it also makes it possible to acknowledge generated alarms.
• An Event List aspect (for the instantiated object). The Event list displays events that occur in the system.
• A Trend aspect that monitors the object value and displays it in a timegrid.
The subdivision into summary status and single module status is meaningful only in case of redundant AF100 Communication interfaces and in case of multiprocessor support. In all other cases (Advant Controller 70, Advant Controller 110 or Advant Controller 160 with one AF100 communication interface and one processor module only) the module summary status and the single module status are nearly identical.
Section 1 Aspect Object Types and their Aspects Detailed Aspect Overview
3BDS013986-600 27
The System Status Object Types Processor Module and PM Summary, OPC, AF100 CI and AF100 CI Summary and IO CI Summary include additional aspects such as:
• A System Status Viewer aspect contains status information about the specific object.
• A System Status Reporter can be used to get a more detailed view of the status of the specific object.
• A System Event List collects and displays information about events that occur in the system.
Detailed Aspect OverviewAll Aspects used for AC 100 Aspect Object Types (‘AC 100...’) are shortly described in the table below.
Aspect Name DescriptionObject Type(s) having this
Aspect
AC 100 'object type name' Type Reference
Defines the origin of the object. All objects
Adapter Data Source
Defines where the test data comes from. AF100 Test Network
Alarm List This aspect shows alarms for the objects that are generated in the system, it also makes it possible to acknowledge generated alarms.
AIS, AOS, DAT_AI, DAT_DI, DIS, DOS, MBS
AlarmControl Graphic element showing the state of the alarm calculated from object status like acknowledge, disturbance or error.
AIS, AOS, DAT_AI, DAT_DI, DIS, DOS, MBS
AlarmControl-Property
Defines the rules how the AlarmControl graphic element will be presented depending on object status.
AIS, AOS, DAT_AI, DAT_DI, DIS, DOS, MBS
Detailed Aspect Overview Section 1 Aspect Object Types and their Aspects
28 3BDS013986-600
BargraphMV01 This graphical element defines a template for a bargraph presentation of a numeric (analog) value, including the limit values and the object state.
AIS, DAT_AI, AOS, DAT_AO
BargraphMV02 This graphical element defines a template for a bargraph presentation of a numeric (analog) value, including the object state.
AIS
Block Faceplate element enabling the Operator to block certain functionality of an object. Supported is
• to block the value transfer from/to the input/output channel to/from the control application, enabling the operator to set the value
• to block alarm generation if limits are transgressed;
• to block the printout of alarms
AIS, AOS, DIS, DOS
Control Faceplate element showing the actual measured value (MV) and allowing to set the measured value (MV); sometimes via additional buttons.
AIS, AOS, DAT_AI, DAT_AO, DAT_DAT, DAT_DI, DAT_DO, DIS, DOS, MBS
Control Connection
The OPC Server properties of the object.
See also Control Connection Aspect Properties on page 36.
AIS, AOS, DAT_AI, DAT
_AO, DAT_DAT, DAT_DI, DAT_DO, DIS, DOS
MB, MBS, MI, MIL, MRAF100 CI, AF100 CI Summary, IO CI Summary, PM Summary, Processor Module, OPC
Control Structure Places the object within the control structure. All 'AC 100 …' objects are placed automatically by the Uploader into the Control Structure.
Aspect Name DescriptionObject Type(s) having this
Aspect
Section 1 Aspect Object Types and their Aspects Detailed Aspect Overview
3BDS013986-600 29
Event List The Event list displays events for the object that occur in the system.
AIS, AOS, DAT_AI, DAT_DI, DIS, DOS
Faceplate Defines a template for an object type specific Faceplate. The Faceplates may exist in up to 3 variants: Reduced, Normal and Extended.
Faceplates are used to monitor and control the related object.
AIS, AOS, DAT_AI, DAT_AO, DAT_DAT, DAT_DI, DAT_DO, DIS, DOS, MB, MBS, MI, MIL, MR
IndicatorBox01 This graphical element defines a template for the presentation of a boolean (digital) value.
DAT_DI, DAT_DO, DIS, DOS, MBS
Limits Faceplate element showing the actual valid limit values and allowing to set them.
AIS
Name Object name.
This is either
• a fixed name (e.g. in case of Status objects) partly proceeded by Bus/Station number or
• the name of the DB Element instance in Function Chart Builder.
All objects
Numeric01
NumericMV01
NumericOUT01
This graphical element defines a template for numerical presentation of a numeric (analog) value.
DAT_DAT, MB, MI, MIL, MR
AIS, DAT_AI
AOS, DAT_AO
Object Display Shows the status of the object with different representations like bar graph, trend display, status and limits.
AIS, AOS, DAT_AI, DAT_AO
DAT_DI, DAT_DO, DIS, DOS, MBS
Object Icon Definition of the object icon visible within the structure window of Plant Explorer.
All objects
OPC Data Source Definition
Defines the connection to the related OPC Server.
AF100 Network
Aspect Name DescriptionObject Type(s) having this
Aspect
Detailed Aspect Overview Section 1 Aspect Object Types and their Aspects
30 3BDS013986-600
Reduced Control Reduced version of the control element (see above).
AIS, AOS, DAT_AI, DAT_AO
DAT_DI, DAT_DO, DIS, DOS, MBS
System Event List
Shows all events of the objects. AF100 CI, AF100 CI Summary, AF100 Network, AF100 Station, AF100 Station Status, AF100 Test Network, Basic Station, IO CI Summary, OPC, Processor Module
AIS Group, AOS Group, DIS Group, DOS Group, DAT_AI Group, DAT_AO Group, DAT_DI Group, DAT_DO Group, DAT_DAT Group, MB Group, MBS Group, MI Group, MIL Group, MR Group
System Status Overview 1
Shows summary status information of the objects.
AF100 CI, AF100 CI Summary, IO CI Summary, OPC, PM Summary, Processor Module
System Status Reporter
A System Status Reporter that can be used to get a more detailed view of the status of the specific object.
AF100 CI, AF100 CI Summary, IO CI Summary, OPC, PM Summary, Processor Module
System Status Viewer
Shows summary status information of the stations and the nodes.
AF100 CI, AF100 CI Summary, AF100 Network, AF100 Station, AF100 Station Status, AF100 Test Network, Basic Station, IO CI Summary, OPC, PM Summary, Processor Module
Aspect Name DescriptionObject Type(s) having this
Aspect
Section 1 Aspect Object Types and their Aspects Detailed Aspect Overview
3BDS013986-600 31
Trend Display This Trend Display Aspect defines a template that monitors the object value and displays it in a timegrid.
AIS, AOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, DIS, DOS
Unit01
UnitMV01
UnitOUT01
This graphical element defines a template for textual presentation of the object’s unit as defined at the UNIT Terminal of the DB Element in Function Chart Builder.
MI, MIL
AIS, DAT_AI, MR
AOS, DAT_AO
Uploader Enables the automatically upload of all related objects and attributes defined by Function Chart Builder and by Bus Configuration Builder into the Control Structure.
AF100 Network, AF100 Test Network
Aspect Name DescriptionObject Type(s) having this
Aspect
Name Aspect Section 1 Aspect Object Types and their Aspects
32 3BDS013986-600
Name AspectThe Uploader of the AC 100 AF100 Network object creates instances of Aspect Object Types delivered with 800xA for AC100 (AC 100 Aspect Object Types).
These instances are grouped according to grouping and structure object types described in AC 100 Aspect Object Types Overview on page 23 and named according to rules described below. The naming rules can be subdivided according to following schema
• fix names applied to all ‘Structure’, ‘Summary’ and ‘Group’ object instances
• variable names for all other elements which equal
– to the value of the corresponding DB Element’s NAME terminal or
– in case of DAT-based objects to the value of the corresponding DB Element’s OBJ_NAME terminal. This allows to give the Aspect Object instance the same name as for example the Analog Input Channel DB Element.
The names are proceeded by their corresponding AF100 Bus-Number (NETW), AF100 Station Number (NODE) and CPU Position Number (CPU) with 2 digits for each number and separated by a Space character, if applicable.
In case of AC 100 Station Status Group the Station-Number is succeeded by 3 Spaces, in case of AC 100 Basic Station Group by 2 Spaces. This enables the alphanumeric sorting algorithm of the Control Structure on System 800xA to start with the AC 100 Station Status Group, proceeded by the AC 100 Basic Station Group.
Section 1 Aspect Object Types and their Aspects Faceplate Aspect
3BDS013986-600 33
Faceplate Aspect
AlarmControlThe faceplates of the AC 100 object types may contain an alarm control icon indicating the alarm state of the object. The presence of the icon depends for digital signals on the value of VALUE_TREAT and for analog signals on the value of LIM1_TREAT / LIM2_TREAT. The icon is shown for
• DAT_DI, DIS, DOS and MBS in case of VALUE_TREAT = 2
• DAT_AI and AIS in case of LIM1_TREAT = 4 or LIM2_TREAT = 4
• AOS with ERROR_TREAT = 2
If any other value is set for VALUE_TREAT or LIMx_TREAT, no AlarmControl icon is shown in the faceplate. The color of the Alarm Control reflects the priority of the highest alarm condition of the object.
Table 1. Alarm Control Icons
Icon Description
Alarm is active and acknowledged.
Blinking Alarm is active but not acknowledged.
AlarmControl Section 1 Aspect Object Types and their Aspects
34 3BDS013986-600
Alarm disabled by user.
Alarm is idle, that is there are no alarms.
Alarm is neither active, nor acknowledged.
Hidden alarm A white rectangle covering an alarm symbol shows that there are hidden alarms for the object.
Shelved alarm A white circle appearing to the right of the alarm symbol shows that there are shelved alarms for the object.
Table 1. Alarm Control Icons
Icon Description
Section 1 Aspect Object Types and their Aspects Pin Button
3BDS013986-600 35
Pin ButtonA pin button has been added right of the View Selection Buttons to the faceplates, which is not shown in the figures below. The pin button will pin the faceplate to the workplace. A pinned faceplate will not be replaced when opening a new faceplate. The new faceplate will be opened in a separate window. For details please refer to the System 800xA, Operations (3BSE036904*)..
Control Connection Aspect PropertiesThe connection to the AC 100 Series controllers is determined by the OPC Data Source Definition Aspect of the AC 100 AF100 Network Object for all its child Aspect Objects.
The actual values of the different OPC items are accessed via the different Properties of the Control Connection Aspect of the different AC 100 Aspect Objects.
The following relation between the Control Connection Aspect of the Aspect Object in System 800xA and the OPC item definition in the AC 100 OPC Server exists:
Table 2 shows the Properties used for 800xA for AC 100 Aspect Objects.
AC 100 Aspect Object AC 100 OPC Server Item
Control Connection Aspect OPC Item = OPC Object
Control Connection Aspect Property OPC Item Attribute = OPC Object Attribute
The Control Connection Aspect Properties are exactly the same as the OPC Item (= OPC Object) Attributes.
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
36 3BDS013986-600
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
ABOVE_HI_LIM1 r Bool, x Alarm limit transgressed
AIS, AOS
ABOVE_HI_LIM2 r Bool, x Alarm limit transgressed
AIS
ACT r Bool, x Set if all represented PMs have ACT=1 (Application is executing normally in the controller (deblocked)) or AC 100 OPC Server is up-and-running.
DB: ACT + Application(s) deblocked
PM Sum, PM, OPC
ACTIVE r Bool, x Object active, i.e. ready to run
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MB, MBS, MI, MIL, MR, DAT_DAT, CI Sum, CI
ALARM_BLK rw Bool, x Alarms are blocked AIS, AOS, DIS, DOS
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 37
ALARM_PERIOD_BLK r Bool, x Value of event set status (EVS_STAT):
0: mode changes do not generate events
1: mode changes do generate events
DB: AL_PERIOD_BLK
AIS, AOS, DIS, DOS
ALARM_UNACK rw Bool, x Alarm unacknowledged
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MBS, IO CI Sum, CI, PM, OPC
APP_ID r String Controller base software, including version or OPC Server software, including version
PM, OPC
APP_TR r Int Treat for application version event
PM
APP_VERSION_AC r String Version (=date) of application as actually loaded in this PM
PM
APP_VERSION_BCD r String Version of application for this PM as actually present in BCD
PM
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
38 3BDS013986-600
APP_VERSION_OPC r String Version of application for this PM as currently loaded in OPC Server
PM
AVC_AC r Int Application version change. =1, if APP_VERSION_OPC != APP_VERSION_AC
PM
AVC_BCD r Int Application version change. =1, if APP_VERSION_OPC!= APP_VERSION_BCD
PM
B0_VAL... B31_VAL r (w)
Bool Boolean value 0..31 MB, DAT_DAT
BELOW_LO_LIM1 r Bool, x Alarm limit transgressed
AIS, AOS
BELOW_LO_LIM2 r Bool, x Alarm limit transgressed
AIS
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 39
BOARD_STATE r String State of CI board. Valid values for local node are {“Operational”, ”Ready”, “Not ready”, ”Malfunctioning”}.
Valid values for remote nodes are {“Operational”, ”Malfunctioning”}
OPC
BUSADMIN r Int Bus Master. Retrieved from BCD for controllers, in runtime using status CDP for OPC server nodes.
CI
BUSLEN r Int Bus Length in meters.(PCI board on local node only).
CI
CLASS r Real Class DB: CLASS AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MBS
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
40 3BDS013986-600
CONST_FALSE, CONST_ONE_D, CONST_ONE_F, CONST_ONE_I, CONST_ONE_IL, CONST_TRUE, CONST_ZERO_D, CONST_ZERO_F, CONST_ZERO_I, CONST_ZERO_IL
r * Constants provided for programming support
CI
CPU r Int CPU position ‘PM’-DB: POSITION AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MB, MBS, MI, MIL, MR, DAT_DAT, CI, PM
CRA r Bool Cable redundancy active.
CI
DESCRIPTION r String The description of the object
DB: DESCR or DB: DESCR1
all
DESCRIPTION2 r String The description of the object, 2nd part
DB: DESCR2 DAT_AI, DAT_AO,
DAT_DI, DAT_DO,
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 41
DEVICE_ID r String CI / PM Board type. Not available for remote OPC server nodes
CI, PM
DISTURBANCE r Bool, x Object is in an alarm state
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI,
MBS
DSP_IDNT DSP_REF DSP_STAT
r Int Reference to actual DSP
AIS, AOS, DIS,DOS
ERROR r Bool, x The object is in an error state
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO
ERROR_TREAT r Int Value of event treatment definition
DB: ERR_TR AIS, AOS, DIS, DOS, DAT_DI, IO CI Sum, CI, PM, OPC
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
42 3BDS013986-600
ERR_CTRL r Bool, x Value of event set status (EVS_ERR):
0: HW or AMPL errors do not generate events
1: HW or AMPL errors do generate events
AIS, AOS, DIS, DOS
GE r Bool, x General station error. (Unspecified)
PM
GW r Bool, x General station warning. (Unspecified)
PM
HI_LIM rw Real Alarm limit value DB: HI_LIM AOS
HI_LIM1 rw Real Alarm limit value DB: HI_LIM1 AIS
HI_LIM2 rw Real Alarm limit value DB: HI_LIM2 AIS
HWE r Bool, x Minor PM hardware error which does not prevent application from execution, e.g. Battery missing or battery power down.
PM
HWVALMAX r Real Highest value the controller hardware can process
DB: SCAL_MAX AIS, AOS
HWVALMIN r Real Lowest value the controller hardware can process
DB: SCAL_MIN AIS, AOS
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 43
HYST r Int Hysteresis DB: HYST AIS, AOS
INITENHI r Int Initial value for EN_HI 0 = disable 1 = enable
DB: INITENHI AOS
INITENLO r Int Initial value for EN_LO 0 = disable 1 = enable
DB: INITENLO AOS
LIM1_TREAT r Int Value of event treatment definition
DB: LIM_1_TR AIS, DAT_AI
LIM2_TREAT r Int Value of event treatment definition
DB: LIM_2_TR AIS, DAT_AI
LO_LIM rw Real Alarm limit value DB: LO_LIM AOS
LO_LIM1 rw Real Alarm limit value DB: LO_LIM1 AIS
LO_LIM2 rw Real Alarm limit value DB: LO_LIM2 AIS
MAN_MODE rw Bool, * Object is in manual mode
AOS, DOS
MAX_LIM r Real Maximum value displayed on scree
DB: DISPMAX AIS, AOS
MIN_LIM r Real Minimum value displayed on scree
DB: DISPMIN AIS, AOS
NAME r String The name of the object
DB: NAME or DB: DAT_OBJ or fix name for CI_SUM, IO, PM_SUM, ‘group’ objects, CI in case of AC 70.
all
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
44 3BDS013986-600
NETW r Int AF100 Bus Number
Typically DB: BUSNO of corresponding AF100-CI DB Element
all
NODE r Int AF100 Station Number
Typically DB: STNNO of corresponding AF100-CI DB Element
all
NORM_POS r Bool Normal position DB: NORM_POS DIS, DOS, DAT_DI, DAT_DO, MBS
NO_OF_DEC r Int Number of decimals DB: DEC AIS, AOS, DAT_AI, DAT_AO, MR
ON_MAX_LIM r Bool, * Signals that output value is above high limit
AOS
ON_MIN_LIM r Bool, * Signals that output value is below low limit
AOS
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 45
OPC_AEA_VERS,
OPC_AEC_VERS,
OPC_DAA_VERS,
OPC_DAC_VERS
r String Version of the OPC standard supported for Alarm&Events / Data Access using the Automation / Custom interface. Available for local node only
OPC
OUTP_BLK rw Bool Output to output connection is blocked.
AOS, DOS
PEE r Int IO device or system error. E.g. missing I/O module
IO CI Sum
PM_LOAD r Real System load (in %) retrieved from user specified DAT_OBJ
PM
PRE r Int I/O process error. IO CI Sum
PRINT_BLK rw Bool Block alarm printouts AIS, AOS, DIS, DOS
RANGE_MAX r Real The highest allowed object value
DB: RANGEMAX AIS, AOS, DAT_AI, DAT_AO, MR
RANGE_MIN r Real The smallest allowed object value
DB: RANGEMIN AIS, AOS, DAT_AI, DAT_AO, MR
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
46 3BDS013986-600
RC1 r Bool Redundant cable 1 failed.
CI
RC2 r Bool Redundant cable 2 failed.
CI
REDUND r String Redundancy (0 = disabled / 1 = enabled)
CI
REDUNDAN r String Redundancy (NO/YES)
PM
RPOS1 r Int Position of redundancy processor module 1
PM
RPOS2 r Int Position of redundancy processor module 2
PM
SEERR r Int Severity value for HW error
AIS, AOS, DIS, DOS, DAT_DI, IO CI Sum, CI
SELECTED
(Not Supported)
rw Bool Object selected AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MB, MBS, MI, MIL, MR, DAT_DAT
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 47
SE r Bool, x PM error prevents application from executing, e.g. Address error, RAM check error. Process instruction set error, CRC error in system flash EPROM
PM
SEAPP r Int Severity for application version event.
PM
SEERR r Int Severity for errors PM, OPC
SEUP r Int Severity for availability events.
CI
SEVAL r Int Severity value for deviation from normal position
DB: SEVAL DIS, DOS, DAT_DI, DAT_DO
SEVAL_H1 r Int Severity value for high limit 1 transgressions
DB: SEVAL_H1 AIS, AOS, DAT_AI
SEVAL_H2 r Int Severity value for high limit 2 transgressions
DB: SEVAL_H2 AIS, DAT_AI
SEVAL_L1 r Int Severity value for low limit 1 transgressions
DB: SEVAL_L1 AIS, AOS, DAT_AI
SEVAL_L2 r Int Severity value for low limit 2 transgressions
DB: SEVAL_L2 AIS, DAT_AI
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
48 3BDS013986-600
START_VALUE r Real Initial value at controller startup
DB: INITVAL AIS, AOS, DOS
STATUS r IntL Presents the status of the object
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MBS, PM Sum, PM
STATUS_X r String Status as hex string PM Sum, PM
SUBSYSTEM r Int Process section 0-16 DB: PROC_SEC AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MB, MBS, MI, MIL, MR
SWE r Bool, x Software error which prevents part of the application from executing, e.g. CRC error in application flash EPROM.
PM
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 49
S_STATUS r Int Status code (ok=0, error=1, warning=2)
CI Sum, IO CI Sum, CI, PM, OPC
S_SUPRESS_ ERRORS
rw Int If set no status information is to be reported for the object.
CI Sum, IO CI Sum, PM Sum, CI, PM, OPC
S_TIME r Int Time when current status was set. Given as UTC time.
CI Sum, IO CI Sum, PM Sum, CI, PM, OPC
T0VAL r String String to display for value zero (text in event descriptions)
DB: T0VAL DIS, DOS, DAT_DI, MBS
T0VAL_H1 r String String to use when high limit 1 is no longer transgressed
DB: T0VAL_H1 AIS, DAT_AI
T0VAL_H2 r String String to use when high limit 2 is no longer transgressed
DB: T0VAL_H2 AIS, DAT_AI
T0VAL_L1 r String String to use when low limit 1 is no longer transgressed.
DB: T0VAL_L1 AIS, DAT_AI
T0VAL_L2 r String String to use when low limit 2 is no longer transgressed.
DB: T0VAL_L2 AIS, DAT_AI
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Control Connection Aspect Properties Section 1 Aspect Object Types and their Aspects
50 3BDS013986-600
T1VAL r String String to display for value one (text in event descriptions)
DB: T1VAL DIS, DOS, DAT_DI, MBS
T1VAL_H1 r String String to use for high limit 1 transgression.
DB: T1VAL_H1 AIS, DAT_AI
T1VAL_H2 r String String to use for high limit 2 transgression.
DB: T1VAL_H2 AIS, DAT_AI
T1VAL_L1 r String String to use for low limit 1 transgression.
DB: T1VAL_L1 AIS, DAT_AI
T1VAL_L2 r String String to use for low limit 2 transgression.
DB: T1VAL_L2 AIS, DAT_AI
TIMESYNC r String Time synchronization mode. Retrieved from the BCD for controllers, in runtime using status CDP for OPC server nodes. Valid values are {“None”, ”Master”, ”Backup”, ”Slave”}
CI
TYPE r String Object type, for example AIS or DAT_AI
Typically the DB element’s callname
all
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Control Connection Aspect Properties
3BDS013986-600 51
UNIT r String The unit of the object DB: UNIT AIS, AOS, DAT_AI, MI, MIL, MR, DAT_AO
UPDATED rw Bool Indicates if the object value is updated
OPC Server AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO
UPDATE_BLK rw Bool, x The value is blocked or forced
AIS, DIS
UP_TR r Int Treat for availability events. Set to 1 for OPC server nodes.
CI
USE_HI_LIM1 r Int Alarm limit value HI_LIM1 used
DB: INITENH1 AIS
USE_HI_LIM2 r Int Alarm limit value HI_LIM2 used
DB: INITENH2 AIS
USE_LO_LIM1 r Int Alarm limit value LO_LIM1 used
DB: INITENL1 AIS
USE_LO_LIM2 r Int Alarm limit value LO_LIM2 used
DB: INITENL2 AIS,
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Alarm and Event List Aspect Section 1 Aspect Object Types and their Aspects
52 3BDS013986-600
Alarm and Event List Aspect
The Alarms and Events shown in the different Alarm and Eventlists come from the Events received or generated by the AC 100 OPC Server.
VALUE r (w)
* The current value of the object
DB: VALUE or DB: VALUE1, ...
AIS, AOS, DIS, DOS, DAT_AI, DAT_AO, DAT_DI, DAT_DO, MB, MBS, MI, MIL, MR, DAT_DAT
VALUE_TREAT r Int/IntL Value of event treatment definition
DB: VALUE_TREAT DIS, DOS, DAT_DI, DAT_DO, MBS
VAL_TYPE r IntL Value type DAT_DAT
WITH_BAT r Int Power Backup PM
(1) “Bool, x” means is also part of the Status property(2) DB:xxxx means the value origins typically from the Terminal xxx of the corresponding DB Element.
For customizing of Alarm & Event Texts please refer to the 800xA for AC 100 OPC Server Configuration and Operation (3BDS013988*).
Table 2. Control Connection Aspect Properties Overview
Property Name r/w
Data Type, Status
(1)
Description Origin(2)
AC 100 Aspect Object Type(s)
Section 1 Aspect Object Types and their Aspects Alarm and Event List Aspect
3BDS013986-600 53
Table 3 shows the possible Events generated for 800xA for AC 100 Aspect Objects.
Table 3. Event Overview
AC 100 Event DescriptionOPC Event Type
OPC Event Category
AC 100 Object Types
ACT Application is stopped/executing normally again in the controller
Condition AC 100 System Condition Event
PM
ALARM_BLOCK Block/deblock of alarm handling
Simple AC 100 System Simple Event
AIS, AOS, DIS, DOS
ALARM_UNACK Text taken from the related event of the object
Type taken from the related event of the object
Category taken from the related event of the object
AIS, AOS, DIS, DOS, DAT_AI, DAT_DI, MBS, CI Sum, PM Sum, CI, PM
AVC_AC Application Version Change Condition AC 100 System Condition Event
PM Sum, PM
AVC_BCD Application Version Change Condition AC 100 System Condition Event
PM Sum, PM
GE (Unspecified) General station error occurred/resolved
Condition AC 100 System Condition Event
PM Sum, PM
GW (Unspecified) General station warning occurred/resolved
Condition AC 100 System Condition Event
PM Sum, PM
H1LIM_MOD High Limit 1 value changed Simple AC 100 System Simple Event
AIS,
H2LIM_MOD High Limit 2 value changed Simple AC 100 System Simple Event
AIS,
H1LIM_TRANS High Limit 1 transgression (Level H)
Condition AC 100 Process Condition Event
AIS, AOS, DAT_AI
Alarm and Event List Aspect Section 1 Aspect Object Types and their Aspects
54 3BDS013986-600
H2LIM_TRANS High Limit 2 transgression (Level HH)
Condition AC 100 Process Condition Event
AIS, DAT_AI
HW_ERROR Hardware error Condition AC 100 System Condition Event
AIS, AOS, DIS, DOS, PM Sum, PM
L1LIM_MOD Low Limit 1 value changed Simple AC 100 System Simple Event
AIS,
L2LIM_MOD Low Limit 2 value changed Simple AC 100 System Simple Event
AIS,
L1LIM_TRANS Low Limit 1 transgression (Level L)
Condition AC 100 Process Condition Event
AIS, AOS, DAT_AI
L2LIM_TRANS Low Limit 2 transgression (Level LL)
Condition AC 100 Process Condition Event
AIS, DAT_AI
LOST_EVENT Lost event in controller Simple AC 100 System Simple Event
AIS, AOS, DIS, DOS, DAT_AI, DAT_DI, MBS, PM Sum, PM
NODEUP Station is down/up Condition AC 100 System Condition Event
CI Sum, CI
MAN_AUTO Manual/auto mode changes Simple AC 100 System Simple Event
AOS, DOS
OPC AC 100 OPC Server stopped /restarted
Condition AC 100 System Condition Event
OPC
PEE IO device error occurred/resolved
Condition AC 100 System Condition Event
IO CI Sum
Table 3. Event Overview (Continued)
AC 100 Event DescriptionOPC Event Type
OPC Event Category
AC 100 Object Types
Section 1 Aspect Object Types and their Aspects Alarm and Event List Aspect
3BDS013986-600 55
PRE I/O process error occurred/resolved
Condition AC 100 System Condition Event
IO CI Sum
RC1 Redundant cable 1 failed/working again
Condition AC 100 System Condition Event
CI Sum, CI
RC2 Redundant cable 2 failed/working again
Condition AC 100 System Condition Event
CI Sum, CI
SE PM error prevents application from exec./PM error resolved
Condition AC 100 System Condition Event
PM Sum, PM
SW_ERROR Software error occurred/resolved
Condition AC 100 System Condition Event
PM Sum, PM
TIMEJITTER Problems with wavering time synchronization on bus
Condition AC 100 System Condition Event
PM Sum, PM
UPDATE_BLOCK Disable/enable process updates
Simple AC 100 System Simple Event
AIS, DIS
VFI_ERROR Communication failure occurred
Condition AC 100 System Condition Event
CI Sum, CI
VALUE_CHANGE Value changes Condition AC 100 Process Condition Event
DIS, DOS, DAT_DI, DAT_DO, MBS
Table 3. Event Overview (Continued)
AC 100 Event DescriptionOPC Event Type
OPC Event Category
AC 100 Object Types
Alarm and Event List Aspect Section 1 Aspect Object Types and their Aspects
56 3BDS013986-600
3BDS013986-600 57
Section 2 AC 100 Aspect Object Types in Detail
This chapter gives you a detailed catalog of the Aspects for the Aspect Object Types supported by 800xA for AC 100, including presentation and interaction.
Analog Input AIS Section 2 AC 100 Aspect Object Types in Detail
58 3BDS013986-600
Analog Input AIS
Faceplate
Presentation
Figure 1. Faceplate
2 3
1
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 59
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 Input Blk IN Yellow UPD_BLOCK = 1 Input blocked
2.2 Print Blk P Yellow PRINT_BLK = 1 Printout blocked
2.3 Error Q Red ERROR=1 Signal Error
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect link to Object Display
3.4 Aspect link to Trend Display
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
60 3BDS013986-600
Control and Reduced Control
Presentation
Figure 1-1. Control
1
2
3
4
5
6
7
9
8
Figure 1-2. Reduced Control
8
9
Alarm Control
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 61
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Range Max RANGEMAX Range Max of the MV value
Black -
2 High Limit 2 HI_LIM2 Alarm High limit 2
- HI_LIM2 >= RANGEMAX or USE_HI_LIM2 = 0
Invisible
Filled Yellow VALUE>HI_LIM2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>HI_LIM2 = 1 Logical color
highAlarm Symbol
Unfilled Grey - Logical color
limit
3 High Limit 1 HI_LIM1 Warning High limit 1
- HI_LIM1 >= RANGEMAX or USE_HI_LIM1 = 0
Invisible
Filled Yellow VALUE>HI_LIM1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>HI_LIM1 = 1
Unfilled Grey -
4 Measured Value Bargraph VALUE Object measured value
Green - Logical color
Limit
? Red ERROR = 1 Logical color
HighAlarmSymbol
Flashing red ALARM_UNACK=1
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
62 3BDS013986-600
5 Low Limit 1 LO_LIM1 Warning Low limit 1
- LO_LIM1 <= RANGEMIN or USE_LO_LIM1 = 0
Invisible
Filled Yellow VALUE<LO_LIM1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<LO_LIM1 = 1
Unfilled Grey -
6 Low Limit 2 LO_LIM2 Alarm Low limit 2
- LO_LIM2 <= RANGEMIN or USE_LO_LIM2 = 0
Invisible
Filled Yellow VALUE<LO_LIM2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<LO_LIM2 = 1
Unfilled Grey -
7 Range Min RANGE_MIN Range Min of the MV value
Black -
8 Measured Value The MV object value
8.1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
8.2 MV Value X X X Red VALUE is Bad No contact with Controller
? ? ? Red ERROR = 1 I/O Error
Flashing Red ALARM_UNACK = 1
Black VALUE Measured value (4-Byte real)
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 63
8.2 cntd
Raised UPD_BLK = 1 Input blocked
Flat UPD_BLK = 0
8.3 MV Unit UNIT Measured unit
Black -
9 Input Field UPD_BLK = 1 Input blocked
UPD_BLK = 0 invisible
No DescriptionDefault Presentation
Condition Remarks
Limits Section 2 AC 100 Aspect Object Types in Detail
64 3BDS013986-600
Limits
Presentation
Figure 1-3. Limits
1
2
4
3
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 ALARM LIMITS for MV Alarm limits for MV
1.1 H2 Text H2 Black Text in front of the value
1.2 H2 Value Black HI_LIM2 High limit 2 value
- USE_HI_LIM2 = 0 Invisible
2.1 H1 Text H1 Black Text in front of the value
Section 2 AC 100 Aspect Object Types in Detail Limits
3BDS013986-600 65
2.2 H1 Value Black HI_LIM1 Warning High limit 1 value
- USE_HI_LIM1 = 0 Invisible
3.1 L1 Text L1 Black Text in front of the value
3.2 L1 Value Black LO_LIM1 Warning Low limit 1 value
- USE_LO_LIM1 = 0 Invisible
4.1 L2 Text L2 Black Text in front of the value
4.2 L2 Value Black LO_LIM2 Alarm Low limit2 value
- USE_LO_LIM2 = 0 Invisible
No DescriptionDefault Presentation
Condition Remarks
Block Section 2 AC 100 Aspect Object Types in Detail
66 3BDS013986-600
Block
Presentation
Figure 1-4. Block
1
2
3
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Block Input Marked UPD_BLK = 1
Unmarked UPD_BLK = 0
2 Block Alarm Marked ALARM_BLK = 1
Unmarked ALARM_BLK = 0
3 Block Printout Marked PRINT_BLK = 1
Unmarked PRINT_BLK = 0
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 67
Object Display
Presentation
Figure 1-5. Object Display
2 3
89
10
7
16
1617
1
4
6
5
18
151413
12
11
Object Display Section 2 AC 100 Aspect Object Types in Detail
68 3BDS013986-600
Behavior:
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Description
Red flashing ALARM_UNACK = 1 Logical color
unack High Alarm
Yellow UPD_BLK = 1 Logical color
blocked Text
1 cntd
Red DISTURBANCE = 1 or ERROR = 1
Logical color
highAlarm Text
Green Logical color
text 2 Normal
2.1 Section Text Section Grey static
2.2 Section Value Green SUBSYSTEM Process section
3.1 Class Text Class Grey Text in front of the value
3.2 Class Value Green CLASS Object class
4 Range Max RANGE_MAX Range Max of the MV value
Green
5 Range Min RANGE_MAX Range Min of the MV value
Green
6 Measured Value Trim Curve
VALUE Object value - Trim curve
Green
7.1 Measured Value Bargraph
VALUE Object measured value
Green
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 69
7.2 High Limit 2 - HI_LIM2 Alarm High limit 2
- HI_LIM2 >= RANGEMAX or USE_HI_LIM2 = 0
Invisible
Filled Yellow VALUE>H2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>H2 = 1
Unfilled Grey
7.3 High Limit 1 HI_LIM1 Warning High limit 1
- HI_LIM1 >= RANGEMAX or USE_HI_LIM1 = 0
Invisible
7.3 cntd
Filled Yellow VALUE>H1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>H1 = 1
Unfilled Grey
7.4 Low Limit 1 LO_LIM1 Warning Low limit 1
- LO_LIM1 <= RANGEMIN or USE_LO_LIM1 = 0
Invisible
Filled Yellow VALUE<L1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<L1 = 1
Unfilled Grey
No DescriptionDefault Presentation
Condition Remarks
Object Display Section 2 AC 100 Aspect Object Types in Detail
70 3BDS013986-600
7.5 Low Limit 2 LO_LIM2 Alarm Low limit 2
- LO_LIM2 <= RANGEMIN or USE_LO_LIM2 = 0
Invisible
Filled Yellow VALUE<L2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<L2 = 1
Unfilled Grey
8 ALARM LIMITS for MV Alarm limits for MV
8.1 Printout Blocked P Yellow PRINT_BLK = 1 Printout blocked
8.2 Alarm Blocked B Yellow ALARM_BLK = 1 Alarm blocked by operator
Bx Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
8.3 Alarm Indication Red VALUE>H2 = 1 Alarm High limit 2
8.4 H2 Text H2 Grey Text in front of the value
8.5 H2 Value Green HI_LIM2 High limit 2 value
- USE_HI_LIM2 = 0 Invisible
9.1 Printout Blocked P Yellow PRINT_BLK = 1 Printout blocked
9.2 Alarm Blocked B Yellow ALARM_BLK = 1 Alarm blocked by operator
Bx Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
9.3 Alarm Indication Red VALUE>H1 = 1 Warning High limit 1
9.4 H1 Text H1 Grey Text in front of the value
9.5 H1 Value Green HI_LIM1 Warning High limit 1 value
- USE_HI_LIM1 = 0 Invisible
10.1 Printout Blocked P Yellow PRINT_BLK = 1 Printout blocked
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 71
10.2 Alarm Blocked B Yellow ALARM_BLK = 1 Alarm blocked by operator
Bx Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
10.3 Alarm Indication Red VALUE<L1 = 1 Warning Low limit 1
10.4 L1 Text L1 Grey Text in front of the value
10.5 L1 Value Green LO_LIM1 Warning Low limit 1 value
- USE_LO_LIM1 = 0 Invisible
11.1 Printout Blocked P Yellow PRINT_BLK = 1 Printout blocked
11.2 Alarm Blocked B Yellow ALARM_BLK = 1 Alarm blocked by operator
Bx Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
11.3 Alarm Indication Red VALUE<L2 = 1 Alarm Low limit 2
11.4 L2 Text L2 Grey Text in front of the value
11.5 L2 Value Green LO_LIM2 Alarm Low limit2 value
- USE_LO_LIM2 = 0 Invisible
12 STATUS Status
12.1 Updated Indication Green UPDATED = 1 Updated
12.2 Updated text Updated Grey Updated text
13.1 Alarm period block Indication
Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
13.2 Alarm period block text Alarm Period Blk Text behind the indication
Yellow ALARM_PERIOD_BLK = 1
Grey -
14.1 Disturbance Indication Red DISTURBANCE = 1 Fault
14.2 Disturbance text Disturbance Text behind the indication
Red DISTURBANCE = 1
Grey -
No DescriptionDefault Presentation
Condition Remarks
Object Display Section 2 AC 100 Aspect Object Types in Detail
72 3BDS013986-600
15.1 Signal error Indication Red ERROR = 1 I/O Error
15.2 Signal error text Signal Error Text behind the indication
Red ERROR = 1
Grey -
16.1 MV Text MV Grey Text in front of the value
16.2 MV Value X X X Red VALUE is Bad No contact with Controller
? ? ? Red ERROR = 1 I/O Error
Green VALUE Measured value
16.3 MV Unit Green UNIT Measured unit
17 Input Blocked Input Blocked Yellow
UPD_BLK = 1 Input blocked
- UPD_BLK = 0 Invisible
18 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an overlay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail NumericMV01
3BDS013986-600 73
NumericMV01
Presentation
Figure 1-6. NumericMV01
3
1
2
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Alarm block frame Dotted yellow ALARM_BLK = 1 Alarm blocked by operator
- ALARM_BLK = 0 Invisible
2 Measured Value VALUE Object value
X X X Red VALUE is Bad No contact with Controller
? ? ? Red flashing ERROR = 1 and ALARM_UNACK = 1
Unacknowledged I/O Error
Red flashing ALARM_UNACK = 1 Unacknowledged alarm
? ? ? Red ERROR = 1 I/O Error
Yellow UPD_BLK =1 Input blocked
Red DISTURBANCE = 1 Alarm
Green - r
3 Open Object Faceplate - Left Mouse click on the Numeric element
Will display the Faceplate aspect as an overlay
UnitMV01 Section 2 AC 100 Aspect Object Types in Detail
74 3BDS013986-600
The conditions are in priority order. Underlined parameters are configurable.
Configuration
Parameters AffectsOptions (bold is default)
Remarks
Value Format 2.Measured Value 0.00
UnitMV01
Presentation
Figure 1-7. UnitMV01
1 2
No Description Default Presentation Condition Remarks
1 Measured Value Unit Green UNIT Object value unit
UNITMV Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unitelement
Will display the Faceplate aspect as an overlay
Behavior
Section 2 AC 100 Aspect Object Types in Detail BargraphMV01
3BDS013986-600 75
BargraphMV01
Presentation
Figure 1-8. BargraphMV01
6
4
7
5
?2
3
8
1.1
1.2
Behavior
No DescriptionDefault presentation
Condition Remarks
1.1 TopLeftEdge Light Grey Three Dimensions effect
1.2 BottomRightEdge Dark Grey Three Dimensions effect
BargraphMV01 Section 2 AC 100 Aspect Object Types in Detail
76 3BDS013986-600
2 AI Error ? Red flashing ERROR = 1 and
ALARM_UNACK = 1
Unacknowledged
? Yellow ERROR = 1 and
UPD_BLK = 1
Input blocked
? Red ERROR = 1 I/O Error
- ERROR = 0 Invisible
3 MV Value VALUE The object value
- ERROR = 1 Invisible - I/O Error
Red flashing ALARM_UNACK = 1 Unacknowledged
Yellow UPB_BLK = 1 Input blocked
Red DISTURBANCE = 1 Alarm
Green -
4 High Limit 2 HI_LIM2 Alarm High limit 2
- HI_LIM2 >= RANGEMAX or USE_HI_LIM2 = 0
Invisible
Filled Yellow VALUE>H2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>H2 = 1
Unfilled Grey -
No DescriptionDefault presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail BargraphMV01
3BDS013986-600 77
5 High Limit 1 HI_LIM1 Warning High limit 1
- HI_LIM1 >= RANGEMAX or USE_HI_LIM1 = 0
Invisible
Filled Yellow VALUE>H1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE>H1 = 1
Unfilled Grey -
6 Low Limit 1 LO_LIM1 Warning Low limit 1
- LO_LIM1 <= RANGEMIN or USE_LO_LIM1 = 0
Invisible
Filled Yellow VALUE<L1 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
6 cntd
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<L1 = 1
Unfilled Grey -
7 Low Limit 2 LO_LIM2 Alarm Low limit 2
- LO_LIM2 <= RANGEMIN or USE_LO_LIM2 = 0
Invisible
Filled Yellow VALUE<L2 = 1 and ALARM_BLK = 1
Logical color
blocked Symbol
Unfilled Yellow ALARM_BLK = 1 Logical color
blocked Symbol
Filled Red VALUE<L2 = 1
Unfilled Grey -
8 Open Object Faceplate - Left Mouse click on Bargraph element
Will display the Faceplate aspect as an overlay
No DescriptionDefault presentation
Condition Remarks
Object Icon Section 2 AC 100 Aspect Object Types in Detail
78 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AIS This icon is represented as a 16x16 and 32x32 bit version.
Section 2 AC 100 Aspect Object Types in Detail Analog Output AOS
3BDS013986-600 79
Analog Output AOS
Faceplate
Presentation
Figure 1-9. Faceplate
1
2
4
3
Faceplate Section 2 AC 100 Aspect Object Types in Detail
80 3BDS013986-600
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 Mode M Cyan MAN_MODE = 1 Manual Mode
A Magenta MAN_MODE = 0 Auto Mode
2.2 Output Blk OUT Yellow OUTP_BLK = 1 Output blocked
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect link to Object Display
3.4 Aspect link toTrend Display
4 Man Set to Man Mode
Auto Set to Auto Mode
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 81
Control and Reduced Control
Presentation
Figure 1-10. Control
1
1
2
3
4
5
6
Figure 1-11. Reduced Control
5
6
No DescriptionDefault presentation
Condition Remarks
1.1 Range Max RANGEMAX
Black
1.2 Range Min RANGEMIN
Black
2 High Limitation MAX_LIM High limitation
- MAX_LIM => RANGEMAX Invisible
Yellow ON_MAX_LIM = 1
Grey ON_MAX_LIM = 0
3 Output Value Bargraph VALUE Object output value
Cyan MAN = 1 Manual mode
Magenta MAN = 0 Auto mode
Flashing Red ALARM_UNACK=1
4 Low Limitation MIN_LIM Low limitation
- MIN_LIM <= RANGEMIN o Invisible
Yellow ON_MIN_LIM = 1
Grey ON_MIN_LIM = 0
5 Output Value VALUE
5.1 Text OUT Black Text in front of value
5.2 Value XXX Red Value is Bad
Red Flashing ALARM_UNACK=1
Black, Raised MAN_MODE = 1 Manual mode
Black, Flat MAN_MODE = 0 Auto mode
5.3 Unit Black UNIT
6 Input Field MAN_MODE = 1 input blocked
- MAN_MODE = 0 Invisible
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
82 3BDS013986-600
Behavior
Section 2 AC 100 Aspect Object Types in Detail Block
3BDS013986-600 83
Block
Figure 1-12. Block
1
2
3
Presentation
No Description Presentation Condition Remarks
1 Block Alarm Marked ALARM_BLK = 1
Unmarked ALARM_BLK = 0
2 LIMITATIONS Limitations for OUT
2.1 H Text H Black Text in front of the value
2.2 H Value Black MAX_LIM High limitation value
X X X Red MAX_LIM is bad No contact with controller
2.3 Black UNIT
3.1 L Text L Black Text in front of the value
3.2 L Value Black LO_LIM Low limitation value
3.2 cntd
X X X Red MAX_LIM is bad No contact with controller
3.3 Black UNIT
Behavior
Object Display Section 2 AC 100 Aspect Object Types in Detail
84 3BDS013986-600
Object Display
Presentation
Figure 2. Object Display
4
6
1716
1 2 3
5
7
8
9
10
11
12
13
1415
18
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 85
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Red flashing ALARM_UNACK =1 Unacknowledged
Yellow OUTP_BLK = 1 Output blocked
Red ERROR = 1 Alarm
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Green SUBSYSTEM Process section
3.1 Class Text Class Grey Text in front of the value
3.4.2 Class Value Green CLASS Object class
4 Range Max RANGE_MAX Range max of the Output value
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
5 Range Min RANGE_MIN Range min of the Output value
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
6 Output Value Trim Curve VALUE Object output value
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
7.1 Output Value Bargraph VALUE Object output value
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
Object Display Section 2 AC 100 Aspect Object Types in Detail
86 3BDS013986-600
7.2 High Limitation MAX_LIM High limitation
- MAX_LIM > RANGEMAX Invisible
Yellow ON_MAX_LIM = 1
Grey ON_MAX_LIM = 1
7.3 Low Limitation MIN_LIM Low limitation
- MIN_LIM < RANGEMIN Invisible
Yellow ON_MIN_LIM = 1
Grey ON_MIN_LIM = 0
8 LIMITATIONS Limitations for OUT
8.1 High Limitation Indication Yellow ON_MAX_LIM = 1 High limitation flag
8.2 H Text H Grey Text in front of the value
8.3 H Value HI_LIM High limitation value
- EN_HI = 1 and VALUE_HI = 1
Invisible
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
9.1 Low Limitation Indication Yellow VALUE_LO = 1 Low limitation flag
9.2 L Text L Grey Text in front of the value
9.3 L Value LO_LIM Low limitation value
- LO_LIM < RANGEMIN Invisible
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
10 STATUS Status
10.1 Updated Indication Green UPDATED = 1 Updated
10.2 Updated text Updated Grey
11.1 Alarm period block Indication
Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC-program
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 87
11.2 Alarm period block text Alarm Period Blk Alarm Period Blk text
Yellow ALARM_PERIOD_BLK = 1
Grey -
12.1 Signal Error Indication Red ERROR = 1 Signal error
12.2 Signal Error Text Signal Error Signal error text
Red ERROR = 1
Grey -
13.1 Disturbance Indication Red flashing ALARM_UNACK = 1 Unacknowledged
Red DISTURBANCE = 1 Fault
13.2 Disturbance Text Disturbance Disturbance text
Red ALARM_UNACK = 1 or DISTURBANCE = 1
Grey -
14.1 OUT Text OUT Grey Text in front of the value
14.2 OUT Value VALUE
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
14.3 OUT Unit UNIT
Cyan MAN_MODE = 1 Manual mode
Magenta - Auto mode
15 Block Alarm Block Alarm Yellow ALARM_BLK = 1 Output blocked
- ALARM_BLK = 0 Invisible
16.1 Auto Indication Magenta MAN_MODE = 0 Auto mode
16.2 Auto Text Auto Auto text
Magenta MAN_MODE = 0 Auto mode
Grey MAN_MODE = 1 Manual mode
No DescriptionDefault Presentation
Condition Remarks
Object Display Section 2 AC 100 Aspect Object Types in Detail
88 3BDS013986-600
17.1 Man Indication Cyan MAN_MODE = 1 Manual mode
17.2 Man Text Man Manual text
Cyan MAN_MODE = 1 Manual mode
Grey MAN_MODE = 0 Auto mode
18 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an over-lay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail NumericOUT01
3BDS013986-600 89
NumericOUT01
Figure 2-1. NumericOUT01
23
1
Presentation
No DescriptionDefault Presentation
Condition Remarks
1 Alarm block frame Dotted yellow ALARM_BLK = 1 Alarm blocked by operator
- ALARM_BLK = 0 Invisible
2 Output Value VALUE Object value
X X X Red VALUE is Bad No contact with Controller
Red flashing ALARM_UNACK = 1 Unacknowledged alarm
Yellow OUTP_BLK = 1 Output blocked
Red ERROR = 1 Alarm
Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
3 Open Object Faceplate - Left Mouse click on Numeric element
Will display the Faceplate aspect as an overlay
Behavior
UnitOUT01 Section 2 AC 100 Aspect Object Types in Detail
90 3BDS013986-600
UnitOUT01
Presentation
Figure 2-2. UnitOUT01
1 2
No DescriptionDefault Presentation
Condition Remarks
1 Unit UNIT Object unit
Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
UNITOUT Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
Section 2 AC 100 Aspect Object Types in Detail BargraphOUT01
3BDS013986-600 91
BargraphOUT01
Presentation
Figure 2-3. BargraphOUT01
2
3
4
5
1.2
1.1
Behavior
No DescriptionDefault presentation
Condition Remarks
1.1 TopLeftEdge
LightGrey
1.2 BottomRightEdge
DarkGrey
BargraphOUT01 Section 2 AC 100 Aspect Object Types in Detail
92 3BDS013986-600
2 Output Value VALUE The object value
Red flashing ALARM_UNACK = 1 Unacknowledged alarm
Yellow OUTP_BLK =1 Output blocked
Red ERROR = 1 Alarm
Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
3 High Limitation MAX_LIM High limitation
MAX_LIM > RANGEMAX or EN_HI = 0
Invisible
Yellow EN_HI = 1 and
VALUE_MAX = 1
Grey EN_HI = 1
4 Low Limitation MIN_LIM Low limitation
MIN_LIM < RANGEMIN Invisible
Yellow ON_MAX_LIM = 1
Grey ON_MIN_LIM = 0
5 Open Object Faceplate - Left Mouse click on Bargraph element
Will display the Faceplate aspect as an overlay
No DescriptionDefault presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Object Icon
3BDS013986-600 93
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AOS This icon is represented as a 16x16 and 32x32 bit version.
Digital Input DIS Section 2 AC 100 Aspect Object Types in Detail
94 3BDS013986-600
Digital Input DIS
Faceplate
Presentation
Figure 2-4. Faceplate
1
2 3
4
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 95
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 Input Blk IN Yellow UPD_BLK = 1 Input Blocked
2.2 Print Blk P Yellow PRINT_BLK = 1
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect link to Object Display
3.4 Aspect link to Trend Display
4 On Set Value to true VALUE = 1
Off Set Value to False VALUE = 0
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
96 3BDS013986-600
Control and Reduced Control
Presentation
Figure 2-5. Control
1
2
Figure 2-6. Reduced Control
2
No DescriptionDefault Presentation
Condition Remarks
1 Value Text
ON Black VALUE = 1
OFF Black VALUE = 0
2 Value
X Red VALUE is Bad
Red Flashing ALARM_UNACK=1
Red DISTURBANCE=1 and VALUE=1
Red border DISTURBANCE=1 and VALUE=0
Green VALUE = 1
Green border VALUE = 0
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 97
Behavior
Block Section 2 AC 100 Aspect Object Types in Detail
98 3BDS013986-600
Block
Presentation
Figure 2-7. Block
2
3
1
No DescriptionDefault Presentation
Condition Remarks
1 Block Input Marked UPD_BLK = 1
Unmarked UPD_BLK = 0
2 Block Alarm Marked ALARM_BLK = 1
Unmarked ALARM_BLK = 0
3 Block Printout Marked PRINT_BLK = 1
Unmarked PRINT_BLK = 0
Behavior
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 99
Object Display
Presentation
Figure 2-8. Object Display
1
23
56
78
910
11
121314
4
Object Display Section 2 AC 100 Aspect Object Types in Detail
100 3BDS013986-600
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Red flashing ALARM_UNACK = 1 Unacknowledged
Yellow UPD_BLK = 1 Input blocked
1 cntd
Red DISTURBANCE = 1 or ERROR = 1
Alarm
Green - Normal
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Green SUBSYSTEM Process section
3.1 Class Text Class Grey Text in front of the value
3.2 Class Value Green CLASS Object class
4.1 Value Trim Curve Green VALUE
4.2 Range Indicators Filled Grey Top indicator
Unfilled Grey Bottom indicator
5 STATUS Status
5.1 Updated Indication Green UPDATED = 1 Updated
5.2 Updated text Updated Grey
6.1 Alarm period block Indication
Yellow ALARM_PERIOD_BLK = 1 Alarm blocked by PC- program
6.2 Alarm period block text Alarm Period Blk Alarm Period Blk text
Yellow ALARM_PERIOD_BLK = 1
Grey -
7.1 Disturbance Indication Red flashing ALARM_UNACK = 1 Unacknowledged
Red DISTURBANCE = 1 Fault
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 101
7.2 Disturbance Text Disturbance Disturbance text
Red ALARM_UNACK = 1 or DISTURBANCE = 1
Grey -
8.1 Signal error Indication Red ERROR = 1 I/O Error
8.2 Signal error Text Signal Error Signal Error text
Red ERROR = 1
8.2 cntd
Grey -
9 PARAMETERS Parameters
9.1 Alarm block Indication Yellow Alarm Block = 1 Alarm blocked by operator
9.2 Alarm block Text Alarm Block Alarm blocked text
Yellow Alarm Block = 1
Grey -
10.1 Printout Indication Yellow PRINT_BLK = 1 Printout blocked
10.2 Printout Text Printout Block Printout blocked text
Yellow PRINT_BLK = 1
Grey -
11.1 Normal position Indication Green NORM_POS = 1 Normal position
Green NORM_POS = 0
11.2 Normal position text Normal Position Grey
Normal position text
12.1 MV Text MV Grey Text in front of the value
No DescriptionDefault Presentation
Condition Remarks
Object Display Section 2 AC 100 Aspect Object Types in Detail
102 3BDS013986-600
12.2 Value 3D Display object
Green VALUE = 1 Symbol released
Black/Green borders VALUE = 0 Symbol pressed in
13 Input Blocked Input Blocked Yellow UPD_BLK = 1 Input blocked
UPD_BLK = 0 Invisible
14 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an over-lay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail IndicatorBox01
3BDS013986-600 103
IndicatorBox01
Presentation
Figure 2-9. IndicatorBox01
1
2
3
4
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Alarm block frame Dotted Yellow ALARM_BLK = 1 Alarm blocked by operator
- ALARM_BLK = 0 Invisible
2 Symbol Center Color VALUE 3D Display object
Black ERROR = 1 I/O Error
Black VALUE = 0 Inverted or Off
Flashing Red ALARM_UNACK = 1 Unacknowledged alarm
Yellow UOD_BLK = 1 Updated blocked
Red DISTURBANCE = 1 and
DisturbanceUsed = 1
Alarm
X Red VALUE is Bad No contact with controller
Green VALUE = 1
Object Icon Section 2 AC 100 Aspect Object Types in Detail
104 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DIS This icon is represented as a 16x16 and 32x32 bit version.
3 Indicator
3.1 Quality Q Flashing Red ALARM_UNACK = 1 and
ERROR = 1
Unacknowledged alarm
3.1 cntd
Q Yellow UPD_BLK = 1 and ERROR = 1
Updated blocked
Q Red ERROR = 1 I/O Error
3.2 Label Label Grey - User defined character
4 Open Object Faceplate - Left Mouse click on Indicator-box element
Will display the Faceplate aspect as an overlay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Digital Output DOS
3BDS013986-600 105
Digital Output DOS
Faceplate
Presentation
Figure 2-10. Faceplate
4
1
2 3
Faceplate Section 2 AC 100 Aspect Object Types in Detail
106 3BDS013986-600
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 Mode M Cyan MAN_MODE = 1
A Magentak MAN_MODE = 0
2.2 Output Blk OUT Black OUTP_BLK = 0
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect Link to Object Display
3.4 Aspect Link to Trend Display
4 On Set Value to True VALUE
Off Set Value to False VALUE
Man Set to Man Mode MAN_MODE = 1
Auto Set to Auto Mode MAN_MODE = 0
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 107
Control and Reduced Control
Figure 2-11. Control
1
2
Presentation
Figure 2-12. Reduced Control
2
No DescriptionDefault Presentation
Condition Remarks
1 Text Value Status Line
1.1 On On Black VALUE = 1
1.2 Off Off Black VALUE = 0
2 Indication
X Red VALUE is Bad
Red Flashing ALARM_UNACK=1
VALUE = 1
VALUE = 0
Color Cyan MAN = 1 Manual Mode
Magenta MAN = 0 Auto Mode
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
108 3BDS013986-600
Behavior
Section 2 AC 100 Aspect Object Types in Detail Block
3BDS013986-600 109
Block
Presentation
Figure 2-13. Block
1
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Block Alarm Marked ALARM_BLK = 1
Unmarked ALARM_BLK = 0
Object Display Section 2 AC 100 Aspect Object Types in Detail
110 3BDS013986-600
Object Display
Presentation
Figure 2-14. Object Display
1
23
45
6
78
9
10
11
12
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 111
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Red flashing ALARM_UNACK =1 Unacknowledged
Yellow OUTP_BLK = 1 Output blocked
Red ERROR = 1 Alarm
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Normal
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Green SUBSYSTEM Process section
3.1 Class Text Class Grey Text in front of the value
3.2 Class Value Green CLASS Object class
4.1 Value Trim Curve VALUE Value
Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
4.2 Range Indicators Filled Top indicator
Unfilled Bottom indicator
5 STATUS Status
5.1 Signal error Indication Red ERROR = 1 I/O Error
5.2 Signal error Text Signal Error Signal Error text
Red ERROR = 1
Grey -
6 Parameters Parameters
6.1 StartValue Indication Last Val Green Start value
Green START_VALUE = 1
Green START_VALUE = 0
Object Display Section 2 AC 100 Aspect Object Types in Detail
112 3BDS013986-600
6.2 StartValue Text Start Value Grey Start Value text
7.1 OUT Text OUT Grey Text in front of the value
7.2 Value 3D Display object
X Red VALUE is Bad
VALUE = 1 Symbol released
VALUE = 0 Symbol pressed in
Color Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
8 Block Alarm Block Alarm Yellow ALARM_BLK = 1 Output blocked
- ALARM_BLK = 0 Invisible
9.1 Auto Indication Magenta MAN = 0 Auto mode
9.2 Auto Text Auto Auto text
10.1 Man Indication Cyan MAN = 1 Manual mode
10.2 Man Text Man Manual text
11 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an overlay
12 STATUS Status
12.1 Updated Indication Green UPDATED = 1 Updated
12.2 Updated text Updated Grey Updated text
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail IndicatorBox01
3BDS013986-600 113
IndicatorBox01
Presentation
Figure 2-15. IndicatorBox01
2
3
4
1
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Alarm block frame Dotted yellow ALARM_BLK=1 Alarm blocked by operator
- ALARM_BLK=0 Invisible
2 Symbol Center Color VALUE 3D Display object
Black VALUE = 0 Inverted or Off
Flashing Red ALARM_UNACK = 1 Unacknowledged alarm
Yellow OUTP_BLK = 1 Updated blocked
X Red Value is Bad.
Red ERROR = 1 Alarm
Cyan MAN_MODE = 1
Magenta MAN_MODE = 0
Object Icon Section 2 AC 100 Aspect Object Types in Detail
114 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DOS This icon is represented as a 16x16 and 32x32 bit version.
3 Label User defined character
Label Grey -
4 Open Object Faceplate - Left Mouse click on Indicatorbox element
Will display the Faceplate aspect as an overlay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Analog Input DAT_AI
3BDS013986-600 115
Analog Input DAT_AI
Faceplate
Presentation
Figure 2-16. Faceplate
1
2 3
Faceplate Section 2 AC 100 Aspect Object Types in Detail
116 3BDS013986-600
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 ERROR Q Red Error=1 Signal Error
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect link to Object Display
3.4 Aspect link to Trend Display
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 117
Control and Reduced Control
Presentation
Figure 2-17. Control
1
2
3
4
5
Figure 2-18. Reduced Control
4
5
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
118 3BDS013986-600
Behavior
No Description Presentation Condition Remarks
1 Range Max Black RANGE_MAX Range Max of the MV value
2 Measured Value Bargraph VALUE Object measured value
Green - Logical color
Limit
? Red DISTURBANCE=1
Red flashing ALARM_UNACK=1 Alarm is unacknowledged
3 Range Min Black RANGEMIN Range Min of the MV Value
4 Measured value
4.1 MV MV Black Text in front of the value.
Logical color
FaceplateFg
4.2 MV Value X X X Red VALUE is Bad No contact with Controller
? ? ? Red ERROR=1 I/0 Error
Red Flashing ALARM_UNACK=1
Black VALUE Measured value
4.3 MV Unit Black UNIT Measured value unit
5 Input Field
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 119
Object Display
Presentation
Figure 2-19. Object Display
5
910
1
3
4
6 2
7
8
11
Object Display Section 2 AC 100 Aspect Object Types in Detail
120 3BDS013986-600
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Red flashing ALARM_UNACK = 1 Logical color unack High Alarm
1 cntd
Red ERROR = 1 Logical color
highAlarm Text
Green Logical color
text 2 Normal
2.1 Section Text Section Grey static
2.2 Section Value Green SUBSYSTEM Process section
3 Range Max RANGE_MAX Range Max of the MV value
Green
4 Range Min RANGE_MIN Range Min of the MV value
Green
5 Measured Value Trim Curve VALUE Object value - Trim curve
Green
6 Measured Value Bargraph VALUE Object measured value
Green
7 STATUS Status
7.1 Updated Indication Green UPDATED = 1 Updated
7.2 Updated text Updated Grey Updated text
8.1 Signal error Indication Red DISTURBANCE = 1 I/O Error
8.2 Signal error text Signal Error Text behind the indication
Red DISTURBANCE = 1
Grey -
9.1 MV Text MV Grey Text in front of the value
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 121
9.2 MV Value ? ? ? Red DISTURBANCE = 1 I/O Error
Green VALUE Measured value
9.3 MV Unit Green UNIT Measured unit
10 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an overlay
11.1 Disturbance Indication Red flashing ALARM_UNACK = 1 Unacknowledged
Red DISTURBANCE = 1 Fault
11.2 Disturbance Text Disturbance Disturbance text
Red ALARM_UNACK = 1 or DISTURBANCE = 1
Grey -
No DescriptionDefault Presentation
Condition Remarks
NumericMV01 Section 2 AC 100 Aspect Object Types in Detail
122 3BDS013986-600
NumericMV01
Presentation
Figure 3.
12
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
X X X Red VALUE is Bad No contact with Controller
? ? ? Red flashing ERROR = 1 and
ALARM_UNACK = 1
Unacknowledged I/O Error
Red flashing ALARM_UNACK = 1 Unacknowledged alarm
? ? ? Red ERROR = 1 I/O Error
Green -
2 Open Object Faceplate - Left Mouse click on Numeric element
Will display the Faceplate aspect as an overlay
Section 2 AC 100 Aspect Object Types in Detail UnitMV01
3BDS013986-600 123
UnitMV01
Presentation
Figure 3-1. Unit
1 2
No Description Default Presentation Condition Remarks
1 Measured Value Unit Green UNIT Object value unit
UNITMV Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
BargraphMV01 Section 2 AC 100 Aspect Object Types in Detail
124 3BDS013986-600
BargraphMV01
Presentation
Figure 3-2. BargraphMV01
1.1
2
3
4
1.2
Behavior
No DescriptionDefault presentation
Condition Remarks
1.1 TopLeftEdge Light Grey Three Dimensions effect
1.2 BottomRightEdge Dark Grey Three Dimensions effect
Section 2 AC 100 Aspect Object Types in Detail Object Icon
3BDS013986-600 125
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DAT_AI This icon is represented as a 16x16 and 32x32 bit version.
2 AI Error ? Red flashing DISTURBANCE = 1 and
ALARM_UNACK = 1
Unacknowledged
? Red DISTURBANCE = 1 I/O Error
- DISTURBANCE = 0 Invisible
X Red VALUE is Bad
3 MV Value VALUE The object value
- DISTURBANCE = 1 Invisible - I/O Error
Red flashing ALARM_UNACK = 1 Unacknowledged
Green -
4 Open Object Faceplate - Left Mouse click on Bargraph element
Will display the Faceplate aspect as an overlay
No DescriptionDefault presentation
Condition Remarks
Analog Output DAT_AO Section 2 AC 100 Aspect Object Types in Detail
126 3BDS013986-600
Analog Output DAT_AO
Faceplate
Presentation
Figure 3-3. Faceplate
1
2 3
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 127
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 ERROR Q Red ERROR=1 Signal Error
3 Aspect link to Object Display
3.1 Aspect link to Trend Display
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
128 3BDS013986-600
Control and Reduced Control
Presentation
Figure 3-4. Control
2
1
2
3
4
4
5
Figure 3-5. Reduced Control
4
5
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 129
Behavior
No Description Presentation Condition Remarks
1 Range Max Black RANGE_MAX Range Max of the MV value
2 Measured Value Bargraph VALUE Object measured value
Cyan - Logical color
Man_Mode
3 Range Min Black RANGE_MIN Range Min of the MV Value
4 Measured value
4.1 MV MV Black Text in front of the value.
Logical color
FaceplateFg
4.2 MV Value X X X Red VALUE is Bad I/0 Error
Black VALUE Measured value
5 Input Field
Object Display Section 2 AC 100 Aspect Object Types in Detail
130 3BDS013986-600
Object Display
Presentation
Figure 3-6. Object Display
1
2
3
4
5
6
78
910
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Description
2.1 Section text Section Grey static
2.2 Section value Green SUBSYSTEM Process section
3 Range Max RANGE_MAX Range Max of the MV value
Cyan
4 Range Min RANGE_MIN Range Min of the MV value
Cyan
5 Measured Value Trim Curve VALUE Object value - Trim curve
Cyan
6 Measured Value Bargraph VALUE Object measured value
Cyan
7 STATUS Status
7.1 Updated Indication Green UPDATED = 1 Updated
7.2 Updated text Updated Grey
8.1 Signal error Indication Red ERROR = 1 I/O Error
8.2 Signal error text Signal Error Text behind the indication
Red ERROR = 1
Grey -
9.1 MV Text MV Grey Text in front of the value
9.2 MV Value ? ? ? Red ERROR = 1 I/O Error
Cyan VALUE Measured value
9.3 MV Unit Cyan UNIT Measured unit
10 Open Object Faceplate - Left Mouse click on Object Display
Will display the Faceplate aspect as an overlay
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 131
Behavior
NumericOUT01 Section 2 AC 100 Aspect Object Types in Detail
132 3BDS013986-600
NumericOUT01
Presentation
Figure 3-7. NumericOUT01
12
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
X X X Red VALUE is Bad No contact with Controller
Red ERROR = 1 I/O Error
Cyan -
2 Open Object Faceplate - Left Mouse click on Numeric element
Will display the Faceplate aspect as an overlay
Section 2 AC 100 Aspect Object Types in Detail UnitOUT01
3BDS013986-600 133
UnitOUT01
Presentation
Figure 3-8. UnitOUT01
1 2
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value Unit Cyan UNIT Object value unit
UNITOUT Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
BargraphOUT01 Section 2 AC 100 Aspect Object Types in Detail
134 3BDS013986-600
BargraphOUT01
Presentation
Figure 3-9. BargraphOUT01
1.1
2
3
1.2
Behavior
No DescriptionDefault presentation
Condition Remarks
1.1 TopLeftEdge Light Grey Three Dimensions effect
1.2 BottomRightEdge Dark Grey Three Dimensions effect
Section 2 AC 100 Aspect Object Types in Detail Object Icon
3BDS013986-600 135
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DAT_AO This icon is represented by a 16x16 and 32x32 bit version
2 MV Value VALUE The object value
X Red VALUE is Bad No contact with server.
Red ERROR = 1 Invisible - I/O Error
Cyan -
3 Open Object Faceplate - Left Mouse click on Bar-graph element
Will display the Faceplate aspect as an overlay
No DescriptionDefault presentation
Condition Remarks
Digital Input DAT_DI Section 2 AC 100 Aspect Object Types in Detail
136 3BDS013986-600
Digital Input DAT_DI
Faceplate
Presentation
Figure 3-10. Faceplate
1
2
4
3
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 137
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
2.1 ERROR Q Red DISTURBANCE=1 Signal Error
3.1 Aspect link to Alarm List
3.2 Aspect link to Event List
3.3 Aspect link to Object Display
3.4 Aspect link to Trend Display
4 On Button Set VALUE to True
Off Button Set VALUE to False
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
138 3BDS013986-600
Control and Reduced Control
Presentation
Figure 3-11. Control
1
2
Figure 3-12. Reduced Control
1
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 139
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Value Text
ON Black VALUE = 1
OFF Black VALUE = 0
2 Value
X Red Value is Bad No contact with controller
Red Flashing ALARM_UNACK=1 and
DISTURBANCE =1
Solid VALUE = 1
Border VALUE = 0
Colour: Green VALUE = NORMPOS
Colour: Red VALUE <> NORMPOS
Object Display Section 2 AC 100 Aspect Object Types in Detail
140 3BDS013986-600
Object Display
Presentation
Figure 3-13. Object Display
2
78
3
1
45
6
9
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 141
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Red flashing ALARM_UNACK = 1 and
DISTURBANCE = 1
Unacknowledged
Yellow BLOCKED = 1 Input blocked
Red DISTURBANCE = 1 Alarm
1 cntd
Green - Normal
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Green SUBSYSTEM Process section
3.1 Value Trim Curve Green VALUE
3.2 Range Indicators Filled Grey Top indicator
Unfilled Grey Bottom indicator
4 STATUS Status
4.1 Updated Indication Green UPDATED = 1 Updated
4.2 Updated text Updated Grey
5.1 Signal error Indication Red ERROR = 1 I/O Error
5.2 Signal error Text Signal Error Signal Error text
Red ERROR = 1
Grey -
6 PARAMETERS Parameters
6.1 Normal position Indication Green NORM_POS = 1 Normal position
Green NORM_POS = 0
6.2 Normal position text Normal Position Grey
Normal position text
7.1 MV Text MV Grey Text in front of the value
Object Display Section 2 AC 100 Aspect Object Types in Detail
142 3BDS013986-600
7.2 Value
X Red Value is Bad No contact with controller
Green VALUE = 1 Symbol released
Black/Green borders VALUE = 0 Symbol pressed in
8 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an overlay
9.1 Disturbance Indication Red flashing ALARM_UNACK = 1 Unacknowledged
Red DISTURBANCE = 1 Fault
9.2 Disturbance Text Disturbance Disturbance text
Red ALARM_UNACK = 1 or DISTURBANCE = 1
Grey -
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail IndicatorBox01
3BDS013986-600 143
IndicatorBox01
Presentation
Figure 3-14. IndicatorBox01
1
2
3
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Symbol Center Color VALUE 3D Display object
Black ERROR = 1 I/O Error
Black VALUE = 0 Inverted or Off
Flashing Red ALARM_UNACK = 1 Unacknowledged alarm
Green VALUE = 1
2 Indicator
IndicatorBox01 Section 2 AC 100 Aspect Object Types in Detail
144 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DAT_DI This icon is represented by a 16x16 and 32x32 bit version.
2.1 Quality Q Flashing Red ALARM_UNACK = 1 and
ERROR = 1
Unacknowledged alarm
Q Red ERROR = 1 I/O Error
X Red Value is Bad No contact with controller.
2.2 Label Label Grey - User defined character
3 Open Object Faceplate - Left Mouse click on Indicatorbox element
Will display the Faceplate aspect as an overlay
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail Digital Output DAT_DO
3BDS013986-600 145
Digital Output DAT_DO
Faceplate
Presentation
Figure 3-15. Faceplate
1
2 3
4
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2 Status Field
ERROR Q Red ERROR=1
3.1 Aspect link to Object Display
3.2 Aspect link to Trend Display
4 On Button
Off Button
Faceplate Section 2 AC 100 Aspect Object Types in Detail
146 3BDS013986-600
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 147
Control and Reduced Control
Figure 3-16. Control
1
2
Figure 3-17. Reduced Control
2
Presentation
No DescriptionDefault Presentation
Condition Remarks
1 Text Value Status Line
1.1 On On Black VALUE = 1
1.2 Off Off Black VALUE = 0
2 Indication
X Red VALUE is Bad No contact with controller
VALUE = 1
VALUE = 0
Color Cyan
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
148 3BDS013986-600
Behavior
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 149
Object Display
Presentation
Figure 3-18. Object Display
1
2
3
56
47
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Description
Red ERROR = 1 Alarm
Cyan - Normal
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Cyan SUBSYSTEM Process section
3.1 Value Trim Curve VALUE Value
3.2 Range Indicators Filled Top indicator
Unfilled Bottom indicator
4 STATUS Status
4.1 Updated Indication Green UPDATED = 1 Updated
4.2 Updated text Updated Grey Updated text
5.1 OUT Text OUT Grey Text in front of the value
5.2 Value 3D Display object
X Red VALUE is Bad
Cyan VALUE = 1 Symbol released
Cyan VALUE = 0 Symbol pressed in
6 Open Object Faceplate - Left Mouse click on Object Display
Will display the Faceplate aspect as an overlay
7 STATUS Status
7.1 Signal error Indication Red ERROR = 1 I/O Error
7.2 Signal error Text Signal Error Signal Error text
Red ERROR = 1
Grey -
Object Display Section 2 AC 100 Aspect Object Types in Detail
150 3BDS013986-600
Behavior
Section 2 AC 100 Aspect Object Types in Detail IndicatorBox01
3BDS013986-600 151
IndicatorBox01
Presentation
Figure 3-19. IndicatiorBox01
1
2
3
No DescriptionDefault Presentation
Condition Remarks
1 Symbol Center Color VALUE 3D Display object
Black VALUE = 0
Red ERROR = 1 Alarm
2 Label User defined character
Label Grey -
3 Open Object Faceplate - Left Mouse click on the Indicatorbox element
Will display the Faceplate aspect as an overlay
Behavior
Object Icon Section 2 AC 100 Aspect Object Types in Detail
152 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for DAT_DO This icon is represented by a 16x16 and 32x32 bit version.
Calculated Data DAT_DAT
Faceplate
Presentation
Figure 3-20. Faceplate
1
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 153
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
154 3BDS013986-600
Control and Reduced Control
Presentation
Figure 3-21. Control
1
2
Behavior
No Description Presentation Condition Remarks
1 Value Type row Black Valuetype = ValueType Indicate the type of value
Boolean, Real, Integer or Integer Long
2 Measured value VALUE Object measured value
2.1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
Section 2 AC 100 Aspect Object Types in Detail Numeric01
3BDS013986-600 155
Numeric01
Presentation
Figure 3-22. Numeric01
12
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value. The value can of the datatype boolean, real, integer or integer long.
Green -
X X X Red VALUE is Bad
2 Open Object Faceplate - Left Mouse click on the Numeric element
Will display the Faceplate aspect as an overlay
Behavior
2.2 MV Value X X X Red Value is Bad No contact with controller
Black VALUE Measured value of datatype Bool-ean, Real, Integer or Integer Long
No Description Presentation Condition Remarks
Object Icon Section 2 AC 100 Aspect Object Types in Detail
156 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AIS This icon is represented by a 16 x16 and 32x32 bit version.
Boolean Calculated Data MB
Faceplate
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 157
Presentation
Figure 3-23. Faceplate
1
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
Control and Reduced Control
Numeric01 Section 2 AC 100 Aspect Object Types in Detail
158 3BDS013986-600
Presentation
Figure 3-24. Control
1
Behavior
No Description Presentation Condition Remarks
1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
1.1 Measured value Black VALUE Object measured value
Max Value: +2.1E+9
Min Value: -2.11E+9
X X X Red VALUE is Bad The value quality is not Ok
Numeric01
Section 2 AC 100 Aspect Object Types in Detail Object Icon
3BDS013986-600 159
Presentation
Figure 3-25. Numeric01
12
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
Green -
X X X Red VALUE is Bad
2 Open Object Faceplate - Left Mouse click on the Numeric element
Will display the Faceplate aspect as an overlay
Behavior
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for MB This icon is represented by a 16x16 and 32x32 bit version.
Calculated Boolean Signal Data MBS Section 2 AC 100 Aspect Object Types in Detail
160 3BDS013986-600
Calculated Boolean Signal Data MBS
Faceplate
Presentation
Figure 3-26. Faceplate
3
2
1
Section 2 AC 100 Aspect Object Types in Detail Faceplate
3BDS013986-600 161
No DescriptionDefault Presentation
Condition Remarks
1 Name and Description
2.1 Aspect link to Alarm List
2.2 Aspect link to Event List
2.3 Aspect link to Object Display
3 On Button
Off Button
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
162 3BDS013986-600
Control and Reduced Control
Presentation
Figure 3-27. Control
1
2
Figure 3-28. Reduced Control
1
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 163
Behavior
No Description Presentation Condition Remarks
1 Measured Value Text Black
2 MV MV Black Text in front of the value
Logical color
Faceplate Fg
2.1 Measured value Green VALUE Object measured value
X Red VALUE is Bad No contact with controller
Object Display Section 2 AC 100 Aspect Object Types in Detail
164 3BDS013986-600
Object Display
Presentation
Figure 3-29. Object Display
1
3 2
4
67
8
5
Section 2 AC 100 Aspect Object Types in Detail Object Display
3BDS013986-600 165
Behavior
No DescriptionDefault Presentation
Condition Remarks
1 Header NAME and DESCR Object Name and Descrip-tion
Green - Normal
2.1 Section Text Section Grey Text in front of the value
2.2 Section Value Green SUBSYSTEM Process section
3.1 Class Text Class Grey Text in front of the value
3.2 Class Value Green CLASS Object class
4.1 Value Trim Curve Green VALUE
4.2 Range Indicators Filled Grey Top indicator
Unfilled Grey Bottom indicator
5 PARAMETERS Parameters
5.1 Normal position Indication Green NORM_POS = 1 Normal position
Green NORM_POS = 0
5.2 Normal position text Normal Position Grey
Normal position text
6.1 MV Text MV Grey Text in front of the value
6.2 Value 3D Display object
Green VALUE = 1 Symbol released
Black/Green borders VALUE = 0 Symbol pressed in
7 Open Object Faceplate - Left Mouse click on Object Dis-play
Will display the Faceplate aspect as an overlay
8.1 Disturbance Indication Red flashing ALARM_UNACK = 1 Unacknowledged
Red DISTURBANCE = 1 Fault
Object Display Section 2 AC 100 Aspect Object Types in Detail
166 3BDS013986-600
8.2 Disturbance Text Disturbance Disturbance text
Red ALARM_UNACK = 1 or DISTURBANCE = 1
Grey -
No DescriptionDefault Presentation
Condition Remarks
Section 2 AC 100 Aspect Object Types in Detail IndicatorBox01
3BDS013986-600 167
IndicatorBox01
Presentation
Figure 3-30. IndicatorBox01
1
2
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
Green -
X Red VALUE is Bad
2 Open Object Faceplate - Left Mouse click on the Indicator element
Will display the Faceplate aspect as an overlay
Behavior
Object Icon Section 2 AC 100 Aspect Object Types in Detail
168 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for MBS This icon is represented by a 16x16 and 32x32 bit version.
Calculated Integer Data MI
Faceplate
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 169
Presentation
Figure 3-31. Faceplate
1
Behavior
No Description Presentation Condition Remarks
1 Name and Description
Control and Reduced Control
Numeric01 Section 2 AC 100 Aspect Object Types in Detail
170 3BDS013986-600
Presentation
Figure 3-32. Control
1
Behavior
No Description Presentation Condition Remarks
1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
1.1 Measured value Black VALUE Object measured value
Max value: +32767
Min value: -32767
X X X Red VALUE is Bad No contact with controller
Numeric01
Section 2 AC 100 Aspect Object Types in Detail Unit
3BDS013986-600 171
Presentation
Figure 3-33. Numeric01
12
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
Green -
X X X Red VALUE is Bad
2 Open Object Faceplate - Left Mouse click on the Numeric element
Will display the Faceplate aspect as an overlay
Behavior
Unit
Object Icon Section 2 AC 100 Aspect Object Types in Detail
172 3BDS013986-600
Presentation
Figure 3-34. Unit
1 2
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value Unit UNIT Object value unit
Green -
UNITMV Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for MI This icon is represented by a 16 x16 and 32x32 bit version.
Section 2 AC 100 Aspect Object Types in Detail Calculated IntegerLong Data MIL
3BDS013986-600 173
Calculated IntegerLong Data MIL
Faceplate
Presentation
Figure 3-35. Faceplate
1
Control and Reduced Control Section 2 AC 100 Aspect Object Types in Detail
174 3BDS013986-600
Behavior
No Description Presentation Condition Remarks
1 Name and Description
Control and Reduced Control
Presentation
Figure 3-36. Control
1
Section 2 AC 100 Aspect Object Types in Detail Numeric01
3BDS013986-600 175
Behavior
No Description Presentation Condition Remarks
1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
1.1 Measured value MV Black VALUE Object measured value
Max value: +2.1E+9
Min value: -2.11E+9
Black VALUE Measured value
Numeric01
Presentation
Figure 3-37. Numeric01
12
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
Green -
X X X Red VALUE is Bad No contact with controller
2 Open Object Faceplate - Left Mouse click on Numeric element
Will display the Faceplate aspect as an overlay
Numeric01 Section 2 AC 100 Aspect Object Types in Detail
176 3BDS013986-600
Behavior
Section 2 AC 100 Aspect Object Types in Detail Unit
3BDS013986-600 177
Unit
Presentation
Figure 3-38. Unit
1 2
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value Unit UNIT Object value unit
Green -
UNITMV Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
Object Icon
Calculated Real Data MR Section 2 AC 100 Aspect Object Types in Detail
178 3BDS013986-600
Presentation
No Description Default Presentation Remarks
1 Object icon for MIL This icon is represented by a 16 x16and 32x32 bit version.
Calculated Real Data MR
Faceplate
Section 2 AC 100 Aspect Object Types in Detail Control and Reduced Control
3BDS013986-600 179
Presentation
Figure 3-39. Faceplate
1
Behavior
No Description Presentation Condition Remarks
1 Name and Description
Control and Reduced Control
Figure 3-40. Control
1
Numeric01 Section 2 AC 100 Aspect Object Types in Detail
180 3BDS013986-600
Presentation
Behavior
No Description Presentation Condition Remarks
1 Measured value VALUE Object measured value
1.1 MV MV Black Text in front of the value
Logical color
Faceplate Fg
Black VALUE Measured value
Numeric01
Section 2 AC 100 Aspect Object Types in Detail Numeric01
3BDS013986-600 181
Presentation
Figure 3-41. Numeric01
12
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value VALUE Object value
Green -
2 Open Object Faceplate - Left Mouse click on Numeric element
Will display the Faceplate aspect as an overlay
Behavior
Unit Section 2 AC 100 Aspect Object Types in Detail
182 3BDS013986-600
Unit
Presentation
Figure 3-42. Unit
1 2
No DescriptionDefault Presentation
Condition Remarks
1 Measured Value Unit UNIT Object value unit
Green -
UNITMV Red UNIT is Bad Object Unit value is bad.
2 Open Object Faceplate - Left Mouse click on Unit element
Will display the Faceplate aspect as an overlay
Behavior
Object icon
Section 2 AC 100 Aspect Object Types in Detail Signal ‘Group’ Objects AIS Group, ...
3BDS013986-600 183
Presentation
No Description Default Presentation Remarks
1 Object icon for MR This icon is represented by a 16x16 and 32x32 bit version.
Signal ‘Group’ Objects AIS Group, ...‘Group’ Objects are mainly for structuring purpose. Signal ‘Group’ Objects are• AIS Group• AOS Group• DIS Group• DOS Group• DAT_AI Group• DAT_AO Group• DAT_DI Group• DAT_DO Group• DAT_DAT Group• MB GROUP• MBS GROUP• MI GROUP• MIL GROUP• MR GROUP
The Station Status Group and the Basic Station Group Objects together with the Status Objects are described below in the same sequence as created by the Uploader in the Control Structure.
Object Icon Section 2 AC 100 Aspect Object Types in Detail
184 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for ‘signaltype’ Group This icon is represented by a 16x16 bit version.
Section 2 AC 100 Aspect Object Types in Detail AF100 Network
3BDS013986-600 185
AF100 NetworkThis object type represents the root object for the AF 100 network in the Control Structure.
List of AspectsThe following unique aspects are important for this AC 100 Aspect Object Type
– OPC Data Source Definition– Uploader. Retrieves the AF 100 control structure from the OPC Server.– System Status Viewer– System Event List. Use this aspect to supervise the status of stations and
CPU's in the AF 100 network.– Alarm List– Event List
Object Icon Section 2 AC 100 Aspect Object Types in Detail
186 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AF100 Network This icon is represented by a 32x32 bit version.
AF100 TestNetwork
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AF100 TestNetwork
This icon is represented by a 32x32 bit version.
AF100 Station
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for AF100 Station This icon is represented by a 16x16 and 32x32 bit version.
Section 2 AC 100 Aspect Object Types in Detail Station Status Group
3BDS013986-600 187
Station Status Group
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for Station Status This icon is represented by a 16x16 and 32x32 bit version.
AF100 CI Summary
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for CI This icon is represented by a 16 x16 and 32x32 bit version.
IO CI Summary Section 2 AC 100 Aspect Object Types in Detail
188 3BDS013986-600
IO CI Summary
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for IO CI Summary This icon is represented by a 32x32 bit version.
PM Summary
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for PM Summary This icon is represented by a 32x32 bit version.
Basic Station Group
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for Station Status This icon is represented by a 16x16 and 32x32 bit version.
Section 2 AC 100 Aspect Object Types in Detail AF100 Communication Board CI
3BDS013986-600 189
AF100 Communication Board CI
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for CI This icon is represented by a 32x32 bit version.
Processor Module
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for PM This icon is represented by a 16x16 and 32x32 bit version.
OPCNode types with AdvSoft 1.x software installed will show up as AC 100 OPC objects. The status information will then be very limited.
Object Icon Section 2 AC 100 Aspect Object Types in Detail
190 3BDS013986-600
Object Icon
Presentation
No Description Default Presentation Remarks
1 Object icon for OPC This icon is represented by a 16 x16 and 32x32 bit version.
3BDS013986-600 191
AABB Master Programming Language 16AC 16ACC 16Advant Controller 16Advant Fieldbus 100 16Advant OCS 16AF100 16AMPL 16AMPL Control Configuration 16APB 16APC 16Application Builder 16Application Performance Controller 16
BBCB 16BCD 16BCI 17Bus Configuration Builder 16Bus Configuration Database 16Bus Configuration Interface 17
CCBA 17CI Board 17Client Application 17Clock Master 17COM 17Component Object Model 17Control Builder A 17
DDAT Based Objects 17DataSet Peripheral (DSP) 17DCOM 17Distributed COM 17DSP 17
EEISA 17Electrostatic Discharge 17ESD 17Event Sets 17EVS 17Extended DB Elements 18 to 19
FFCB 18Function Chart 18Function Chart Builder 18
HHMI 18HSI 18Human Machine Interface (HMI) 18Human System Interface 18
LLED 18Light Emitting Diode 18
MMan Machine Interface 18
Index
Index
192 3BDS013986-600
Index
192 3BDS013986-600
MMI 18
OObject (Process) 18OPC 18Operator Station 18OS 18
PPC 18PC Element 18PC Program 18PCPGM 19Personal Computer 18
SSDP 19Service Data Protocol (SDP) 19System Status Object Types 27
XXDB 19
Power and productivity for a better worldTM
Contact us
Copyright© 2003-2014 ABB.All rights reserved.
3BD
S01
3986
-600www.abb.com/800xA
www.abb.com/controlsystems