Post on 02-Oct-2015
description
NIRAL INDUSTRIES www.candlemould.com
6 Ways to make Candle
Making EASYA GUIDE FOR EVERY CANDLE MAKER
Page No :: www.candlemould.com
TABLE OF CONTENTS
1. HOW TO LOCK SKRINKAGE MAKING CANDLE IN
SINGLE POURING
2. HOW COLOUR CAN CHANGE THE LOOKS OF CANDLE
3. FIRE SAFETY
4. HOW TO USE WAX
5. BATCH QUANTITY
6. ABOUT SOME ADDITIVES
Page No 2 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsCHAPTER ONE
HOW TO LOCK SHRINKAGE
MAKING CANDLE IN SINGLE
POUR
Page No 3 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsSome Excellent Tips by which you can Lock Shrinkage
& make Candle in Single Pouring
This are moulds in which we
will be pouring Wax
Wax is now completely filled with
Wax. Zoom the photo if required
At this time wax is in Semi Hard &
we will place 1 mould in water
Water should come till complete
Top over the wax and let it cool.
Left mould you will find shrinkage
Right one will find extra wax
Rod place to show the shrinkage &
Right one with extra wax after level
Page No 4 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsHow does it actually work
When we melt the Wax, the Volume of Wax increases
And when its in Semi Hard phase and we cool it
It gets lock at that position. Here you get following Benefit
Page No 5 :: www.candlemould.com
1. In Single Pouring you can make candle very Easily & Happily @ Home
2. You Save on Cost of additional Wax which needed to pour
3. And Time which takes for additional wax to cool by this your
production capacity will also increase
4. This will also Increase the Shine and Gloss of Wax
5. Cooler the Water Better the Result.
http://www.facebook.com/siliconecandlemouldsCHAPTER TWO
How Proper Colour can change
the Looks of Candles
Page No 6 :: www.candlemould.com
For adding Colour there are few option
Industrial Colour / Pigmnet. In Industrial Colour there are two types
1. Fluorescent Colour
2. Oil Grade Colour
For Hobby many use Crayons. Do not use Crayon as crayon contains
50% Clay Powder 40% Wax & 10% Industrial Pigment. This Clay
Powder makes the Candle look Dull and does not get mix with Wax
settles down and creates obstacle while Burning.
AVOID USING CRAYON
http://www.facebook.com/siliconecandlemouldsHow Proper Colour can change the Looks of Candles
These 2 moulds we will pour
2 different types of Colour
Left is Fluorescent Yellow Colour
Right is Oil grade Yellow Colour
Filling both the mould with different
grade of colour. ZOOM Photo
Wax is now cooled and we shall
take out candle
Yellow Oil colour got penetrate in
right mould & Fluoro colour didnt
Left - Flourscent :: Right - Oil Color
You will see Petals in Oil Coloured
Candle looks more sharp & detailed
compared to Fluorscent colour
Page No 7 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsFluorescent v/s Oil ColourS. No Fluorescent Colour Oil Based Colour
How to use One need to make Paste with Coconut Oil & then need to add to molten wax
One can directly add Powder Colour to molten wax
How does it mix
Fluorescent Colour gets dispersed in wax so when you add in wax give a good stirring and rubbing over vessel
Oil Colour Penetrate in wax and any surface. One directly mixed so no
Does it penetrate on mould
It does not penetrate in Mould or any surface.
It gets penetrate in Mould and also other surface like furniture, packing box, whichthen cannot be removed
Which colourlooks great
In Fluorescent Colour, candles look good but detailing is less
One get more detailed lining in intricate design when made with Oil Colour.
Suggested for Suggested for Chunk, Paraffin Suggested for Gel Candle, Paraffin
Burning Good burning but less compared to Oil Excellent Burning support
When to add Do not add in very Hot wax If doesnt mix apply more heat to wax
UV Stabiliser No such thing required for FluorscentColour
UV rays of Sun, TubeLight fades up Oil Grade colour. So UV Stabilser is suggested
Page No 8 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsOur Colours are very Pure, Concentrate and of Finest Technical
grade for Candle Industry
Looks of candle one get in Oil Colour will never get in
Fluorescent Colour, but for separate colour you need separate
moulds.
Many established candle makers are buying separate mould for
separate colour as their Focus is on Shade &Texture of Candle
UV stabiliser needs to be added for Oil Colour. We have this
item in product list.
Mostly in Palm Wax and other waxes Oil Colour gets mixed
properly
MORE ABOUT COLOURS
Page No 9 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsCHAPTER THREE
FIRE SAFETY
Page No 10 :: www.candlemould.com
FLASH POINT TEMPERATURE AT WHICH WAX CATCHED FIRE.
Proper care should be taken that wax is not overheated.
But in case if any of such thing happen then
TURN OFF GAS & COVER WITH PAN / LID CAREFULLY
Never use water to put out a wax fire, it will spread the fire! If you don't
have a proper fire extinguisher nearby, use baking soda, sand or flour to
extinguish the flames.
http://www.facebook.com/siliconecandlemouldsCHAPTER FOUR
HOW TO USE WAX
Page No 11 :: www.candlemould.com
Always make small pieces then melt it.
By this melted wax will not get overheated
Use bigger then required vessel, but this it will give good control over
the pouring of wax
Suggested to use Steel Vessel.
http://www.facebook.com/siliconecandlemouldsCHAPTER FIVE
BATCH QUANTITYTO ACTUALLY MAKE QUALITY CANDLES BATCH QUANTITY
PLAYS A VERY IMPORTANT ROLE. FIND MORE DETAILS IN FOLLOWING PAGES
Page No 12 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsBatch Quantity means making candle with uniform pattern of quantity. Unlike
how we make TEA in daily basis. Here cup is standard Batch quantity
Having proper control over weight of each item. By doing so you will have
exact idea how much actually you added different Grades of Waxes,
Perfume, Additives and so on. You may buy a good Weighing Scale.
Suggested to make a Batch of at least 500 gm and multiple of that so
whenever you melt wax it would be 500 1000 1500 and so on.
You might have observed that at Home when daily Dal is made, everyday
there will be slight change in Taste. But in Hotel their taste of Sambhar is same
for years. There are Hotels whose taste are same for more than 10 years also.
Batch quantity will also help you to have continuous improvement and
monitoring in your product and whatever test - sampling you do you can
measure that. It will also help you to calculate exact costing.
MORE ABOUT BATCH QUANTITY
Page No 13 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsCHAPTER SIX
ADDITIVESTO ACTUALLY MAKE QUALITY CANDLES THERE ARE MANY ADDITIVES
WHICH NEEDED TO BE ADDED TO WAX TO INCREASE SHINE, GLOSS
BURING TIME, SMOOTHNESS OF CANDLE
FIND MORE DETAILS IN FOLLOWING PAGES
Page No 14 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsFollowing are some of Wax additives which we have or are available in market.
Purpose is to explain you what types if additives can be used for Candle Making
Wax Whitener It removes Yellow content from wax and will make the colours look more
Bright
Wax Shinner It bringswhiteness and shine to candle. Paraffin Wax is transperant. At times
we need to make it look slight opaque so that textures over Candle look good. For that you
can use our Wax Shinner. Also it make make any colour lighter by certain shades.
Wax Hardener Acidic type Hardener like Stearic Acid are not suggested for rubber moulds
We have some Plastic Granules type Hardener which will make Candle Hard, Non Drip.
Bees Wax Brings toughness and Flexibility to wax and also binds perfume. Exceed use
may make candle opaque
Micro Wax Brings Flexibility and smoothness to candle
UV Stabiliser UV rays of Sun, TubeLight fades up Oil Grade colour. So UV Stabilser is
suggested to use.
MORE ABOUT ADDITIVES
Page No 15 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsINSERT IMAGES
Some of our Office different area photos showroom, packaging, warehouse, office, training area
www.candlemould.com
Indias No 1 site for Candle Making Moulds & Accessories
Indias largest manufacturer of Candle Mould
Page No 16 :: www.candlemould.com
http://www.facebook.com/siliconecandlemouldsFREE SAMPLE COLOUR
USE COUPEN CODE nir001
For your sampling purpose you will get our assorted different set of 3 Oil Color + 3 Fluoro Color
Offer valid till 31 Oct 2014
GO TO WEBSITE NOW
Niral Industries230 Gala Complex, Dumping Rd., Mulund (W), Mumbai 4000800-8879651091 - 2 - 3 :: info@candlemould.com :: www.candlemould.com
Hope you all have got wonderful Details. Looking to provide more such details in Future
Mr. Ramesh S. MaisheriMr. Fenil R. Maisheri
http://www.candlemould.com/http://www.candlemould.com/http://www.facebook.com/siliconecandlemoulds