5/7/2007 TS_CLIC_AB M.Taborelli, TS-MME High precision machining and metrology for structures:...

Post on 06-Jan-2018

218 views 4 download

description

5/7/2007 TS_CLIC_AB M.Taborelli, TS-MME Tolerances: 5 m shape tolerance R.Leuxe

Transcript of 5/7/2007 TS_CLIC_AB M.Taborelli, TS-MME High precision machining and metrology for structures:...

5/7/2007 TS_CLIC_AB M.Taborelli, TS-MME High precision machining and metrology for structures: achievements and open questions M.Taborelli 5/7/2007 TS_CLIC_AB M.Taborelli, TS-MME Why +/- 1 micron precision? 0. Frequency matching (deviation of about 4MHz/m on cavity radius at 30 GHz) 1. Longitudinal alignment precision :