5/2 Directional Control ValvesNominal sizes 6 and 12For double-acting cylindersSolenoid pilot operated soft seal spool valvesNAMUR pattern flange mounting (size 6)G 1/4 or G 1/2 internal thread connectionOperating pressure max. 10 bar (see parameters)

Catalog Register P 11

Publication 7502516.06.12.93

DescriptionSolenoid valves for filtered, lubricated1) or non-lubricatedair

Flow direction: FixedTemperature range: –10 to +60 °CMaterial used:– Housing: Aluminium– Solenoid pilot flange: POM– Seals: NBR (Perbunan)

FeatureslHigh flow ratelSimple design lStraight-through flow, high Cv-factorlMaintenance freelEasily interchangeable solenoid systemlCompact designlWith or without manual overridelPower consumption of 3 W standard

1) Ölempfehlung: Shell Hydrol DO 32, ESSO Febis K 32 (Stand 07/92) oder vergleichbare Öle mit DVI-Werten < 8 (DIN 53521) undISO-Viskositätsklasse 32-46 (DIN 51519).

IMI Norgren-Herion Fluidtronic GmbH & Co. KG, D-70731 FellbachStuttgarter Straße 120, D-70736 Fellbach ⋅ Tel.: +49 (0)7 11 / 52 09-0 ⋅ Fax: +49 (0)7 11 / 52 09-6 14

Valve parametersSize Pipe connection Operating

pressure[bar]

kv-value(Cv (US) ≈kv x 1.2)

Switchingtime

Manualoverridewithout/withdetent

Weightwithoutsolenoid

Sectionaldrawing

Dimen-sionaldrawing

Cat. No.

1 3 5 2 4 min. max. [ms] [kg] No. No. Valve Solenoid

6 6 6

G 1/4G 1/4G 1/4

FlangeFlangeFlange

111

101010

1.21.21.2

353535

–WithoutWith

0.550.550.55

010101

010101

2636045 1)

2636046 1)

2636047 1)

Seesolenoidtable

6 6 6

G 1/4G 1/4G 1/4

FlangeFlangeFlange

111

101010

1.21.21.2

303030

–WithoutWith

0.900.900.90

020202

020202

2636245 1)

2636246 1)

2636247 1)

Seesolenoidtable

6 6 6

12

G 1/4G 1/4G 1/4

G 1/2

G 1/4G 1/4G 1/4

G 1/2

111

2

101010

10

1.21.21.2

3.0

353535

40

–WithoutWith

With

0.550.550.55

0.83

010101

01

030303

04

26360662)

26360672)

26360652)

2637065

Seesolenoidtable

6

12

G 1/4

G 1/2

G 1/4

G 1/2

1

2

10

10

1.2

3.0

30

35

With

With

0.90

1.30

02

02

05

06

2636265

2637265

Seesolenoidtable

1) 2 mounting bolts M5 x 35 (DIN 912 - 8.8 A2J) included in delivery.2) Pressure head at R ≤ operating pressure minus 1 bar.

2 7502516.06.12.93

Cat. No. (example): Valve Solenoid State voltage [V] and frequency [Hz]2636047. 0240

1) Inrush2) Holding

NAMUR fitting accessories

Designation Application For additionalinformationsee publication

Weight

[kg]

Cat. No.

Flange plate Direct attachment to pneumatic lifting drives with NAMURridge; in case of wall mounting, dependent on position ofpiping

HERION7502242

0.49 0559857

Clamp Used in conjunction with flange plate for attachment topneumatic lifting drives with NAMUR post

0.10 0540593

Spacer plate Direct attachment to pneumatic swivel drives,e.g. when using a solenoid with terminal boxCat. No. 0788 or 0789;dependent on type of attachment

0.25 0540109

Adapter plate Direct attachment to pneumatic swivel drives with holepattern corresponding to older type valve:Cat. No. 2636055, 2636056, 2636064

0.18 0559853

Silencer Pressure connection G 1/4; max. back pressure 6 bar HERION7501080

0.01 0014600

Solenoid parameters

Standard voltage 24 V. Further voltages and types on request.Design to VDE 0580 or VDE 0171/ EN 50014,EN 50028. 100% duty cycle.Picture Power

consumptionRatedcurrent[mA]

Tolerance[%] ratedcurrent

Protectionclass

Ambienttemperature

Fluidtemperature

Weight Dimen-sionaldrawing

Circuitdiagram

Cat. No.

[W]DC

[VA]AC DC AC + – [°C] [°C] [kg] No. No.

2.7

–

–

101) 4.42)

112

–

–

451)

202)

10

10

10

10

IP 65 –25 to+55

to +80 0.18 03

03

01

01

0240

0241

3.2 – 135 – 10 15 IP 65EEx m II T4

–25 to+40

to +55 0.4 04 04 0278

– 4.4 – 183 10 15 04 07 0279

3.9 – 161 – 10 15 IP 65EEx em II T5or T6

–25to +80 at T5to +60 at T6

0.83 05 04 3910

– 2.9 – 140 10 15 IP 65EEx em II T5or T6

–25to +80 at T5to +60 at T6

0.83 05 07 3911

7502516.06.12.93 3

Sectional drawings

01

1 Body assly. 7 Solenoid11 Union12 Disk15 Piston assly.21 Pilot valve22 O-ring31 Screw33 Socket-head screw34 Coding stud

Spare parts on request

02 1 Body assly. 7 Solenoid11 Union12 Disk15 Piston assly.21 Pilot valve22 O-ring31 Screw33 Socket-head screw34 Coding stud

Spare parts on request

4 7502516.06.12.93

Dimensional drawings [mm]

01

02

7502516.06.12.93 5

Dimensional drawings [mm]

03

04

6 7502516.06.12.93

Dimensional drawings [mm]

05

06

7502516.06.12.93 7

Dimensional drawings [mm]

07 08

09

Electrical circuit diagrams

01

04 07

NAMUR hole pattern

Subject to alteration 7502516.06.12.93