security door controls

www.sdcsecurity.com e-mail: service@sdcsecurity.com

ISO 9001 : 2000FM 52705

50 Series Electric Strike

51 - For cylindrical locksets with .5" to .75" latch.

52 - For mortise locksets with up to .75" latch.

53 - For mortise locksets with latch and deadbolt. Releases only when deadbolt is retracted.

54 - For mortise locksets with latch and deadbolt and bored or mortise deadbolts. Releases extended deadbolt.

The SDC 50 Series heavy duty electric strikes are designed for use with cylindrical and mortise locksets. The choice of faceplates configurations eliminates the need for centerline relocation, making them perfect for new or retrofit construction. Applications include hollow metal and aluminum door frames.

UL 1034, Burglary Protection EquipmentUL 10B, Fire Door Accessories, 3 hourUL, Auxiliary LocksANSI/BHMA 156.5 Grade 1

•

•

••

No Centerline RelocationANSI Grade 1, Heavy DutyReleases with 20 lbs side Load PressureHorizontal Alignment AdjustmentStainless Steel Corrosion ResistantTamper Resistant Heavy Duty ConstructionExceeds 1 Million Cycle Test Inboard SolenoidFits ANSI 115.1 Frame Prep with face modificationPlug Connector (Standard)Failsecure (Failsafe Optional)

•••

••

•

•

•

••

Features

Listings & Compliance

www.SDCsecurity.com E-mail: service@sdcsecurity.com

54-F For use with mortise locksets with a normally extended 1" dead-bolt where lockset is released, recaptured and contained.

Schlage Both latchbolt and deadbolt are released by a single keeper. Keeper is held open after bolts are released. Door may be closed with deadbolt extended. Keeper returns to locked when bolts re-enter strike.

52-B For use with mortise locksets and mortise panic devices with or without a dead- latch. (Does not require a relocation of center line.)

After releasing the latchbolt, the keeper returns to the locked position.

Corbin Russwin PDQFalcon ArrowFolger Adam BestAccurate SargentBaldwin Yale Marks OMNIA Dorma

54-D For use with mortise locksets with a normally extended 1" deadbolt where lockset is released, recaptured and contained.

Corbin Russwin PDQFalcon ArrowFolger Adam BestAccurate SargentBaldwin Yale Marks OMNIA Dorma

Both latchbolt and deadbolt are released by a single keeper. Keeper is held open after bolts are released. Door may be closed with deadbolt extended. Keeper returns to locked when bolts re-enter strike.

53-F For use with mortise locksets where the deadbolt is not released.

Schlage When the deadbolt is projected manually, the strike will not release. When the deadbolt is retracted, access is accomplished by electrically releasing the keeper.

53-E For use with mortise locksets where the deadbolt is not released.

Schlage When the deadbolt is projected manually, the strike will not release. When the deadbolt is retracted, access is accomplished by electrically releasing the keeper.

53-D For use with mortise locksets where the deadbolt is not released.

Corbin Russwin PDQFalcon ArrowFolger Adam BestAccurate SargentBaldwin Yale Marks OMNIA Dorma

When the deadbolt is projected manually, the strike will not release. When the deadbolt is retracted, access is accomplished by electrically releasing the keeper.

52-C For use with mortise locksets and mortise panic devices with or without a dead- latch. (Does not require a relocation of center line.)

Schlage After releasing the latchbolt, the keeper returns to the locked position.

51-A For use with deadlatch and cylindrical locksets (Does not require a relocation of the center line.)

Adams Rite 4720 ANSI and compatible narrow stile locks, all bored (cylindrical) locksets with .5" or .625" latchbolts.

After releasing the latchbolt, the keeper returns to the locked position.

security door controls

www.SDCsecurity.com E-mail: service@sdcsecurity.com

P.O. Box 6219, Westlake Village, CA 91359-62193580 Willow Lane, Westlake Village, CA 91361-4921(805) 494-0622 • (800) 413-8783 • Fax: (805) 494-8861Email: Service@SDCsecurity.com www.SDCsecurity.com

© 2006 Security Door Controls Printed in the U.S.A. LIT-50Strike 8.06 2.5M CR

TAP 12=24 UNCTHRU 2 PLS.

CENTER LINE OF STRIKEAND LOCKBOLT OF LOCKSHOULD ALIGN HORIZONTALLY

47/64" STANDARD ANSI19/32" FOR YALE, SARGENT

0.375

3.410+.015-.000

4.125+.005

.734

1.6001.250+.015-.000

.625

.250

.625

3.625+.015-.000

4.875+.015-.000

5/32" MTGTAB DEPTH(TYP) 2 PLS.

Specify 12 or 24290 mA @ 12VDC150 mA @ 24VDC

Ordering Information

U 630 Stainless Steel (Standard)D 606 Dull BrassG 612 Dull BronzeH 613 Oil Rubbed BronzeP 625 Bright ChromeQ 626 Dull Chrome

FS Failsafe (Not UL Listed)LBM Latch Bolt MonitorLCM Locking Cam MonitorLBMLCM Latch Monitor and Locking Cam MonitorLBM, LBMLCM not available with model 54.LCBDM available with model 53 only.All monitoring switches are SPDT dry contacts, 5 Amp @ 30VDC

Model Voltage Finish Option51-A 24 U LBM

Electrical Specifications

Finish

Options

How to Order