Post on 14-Jan-2016
46 cm 1.8 cm13.5
40.5cm35.5cm
21.5cm
10 cm
4.5 cm18.5 cm
32.5cm
26 cm
53 cm
35 cm
18 cm
16 cm
58 cm
50 cm
38 cm
19 cm
10 cm
Concern 1: (1) Fix the base framework to ensure thatthe camera enclosure is wellattached to the base;(2) Add an “L” end in the baseframework to keep the camera enclosure from sliding when Installed(3) Determine what is the optimal size for this base framework
Concern 2: the strength of the mobile part, both materialand the connector with other part
Concern 3: add the steal cableto the upper bar of the gondola system
Concern 4: the upper bar must be removable to give access tothe interior enclosure
Concern 5: to eliminate the sharp edges
Concern 6: to replace the boltswith a rugged type of weld (not a priority though)
Concern 7: because of item (4)we need to lengthen the main bar in a couple inches (the case does not need to be completely open to give access to the interior enclosure.)
Concern 8: connector and power?
Concern 9: material and strength
Concern 10: waterproof ethernet connector
How many power we need, and where we can get, and through which way
A diagram to show the basic set-up for the whole camera system in the tower:(1) Safety part(2) Reference for camera(3) Camera system
Data download?
Other sensor?
Time schedule?