Post on 20-Nov-2018
Technical Guide
Brass Ball Valves
BBV20 Gas Approved BSPP Valves
BBV21 WRAS Approved BSPP Valves
Options & Accessories for BBV21 Valves
BBV22 T-handle WRAS BSPP Valves
BBV24 WRAS Approved CxC Valves
BBV25 T-handle WRAS CxC Valves
BBV26 Gas Approved CxC Valves
BBV31 & BBV32 3-Port BSPP Valves
BBV36 & BBV37 3-Port BSPP Valves
BBV34 Mini BSP Ball Valves
BBV35 CxC Service Valves
BBV38 Ball Valves for Airlines
Pneumatically Actuated Valves
Electrically Actuated Valves
BBV20 Gas Approved Full Bore Brass Ball Valve
3
Introduction
2
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no.BBV20
Cat. no.BBV20LL
Size (") DN (mm)Dimensions (mm)
PEDTorquein Nm.
KvWeight
(kg)ØD A B C
K65641 K65721 1/4 8 10.0 51.5 96.0 42.0 SEP 5.4 5.4 0.15
K65642 K65722 3/8 10 10.0 51.5 96.0 42.0 SEP 5.4 6.0 0.14
K65643 K65723 1/2 15 14.0 59.0 96.0 46.0 SEP 7.2 16.3 0.18
K65644 K65724 3/4 20 19.0 67.0 121.0 57.0 SEP 14.4 29.5 0.30
K65645 K65725 1 25 24.0 81.5 121.0 59.0 SEP 18.9 43.0 0.44
K65646 K65726 1 1/4 32 30.0 94.0 151.0 73.0 19.8 89.0 0.77
K65647 K65727 1 1/2 40 38.0 102.5 151.0 79.0 42.3 230.0 1.03
K65648 K65728 2 50 47.0 123.0 160.0 93.5 43.2 265.0 1.76
K65649 K65729 2 1/2 65 65.0 152.0 206.0 123.0 54.0 541.0 3.71
K65650 K65730 3 80 80.0 177.0 206.0 133.0 98.1 873.0 5.90
K65651 K65720 4 100 100.0 214.0 261.0 165.0 117.0 1390.0 10.00
BBV20
Advantica - The former British Gas testing body.
BBV20LL with lockable leverAll valves comply with the Pressure EquipmentDirective (PED) either through Sound EngineeringPractice (SEP) or, where allowed, by CE marking.
Third-Party Certification of Property Loss PreventionProducts. The FM APPROVED mark, which is backedby scientific research and testing, tells you that ourproducts conform to the highest standards.
B
C
A
ØD
size 8mm~50mm (1/4" to 2")
size 65mm~100mm (2 1/2" to 4")
B
C
ØD
A
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome plated brass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Steel
Nut Steel
BBV20Gas Approved Full BoreBrass Ball Valves
• Approved to BS EN331: 1998 for GasFamily 1 (natural gas), Family 2 (towngas), Family 3 (LPG’s inc. Calor & Shell)
• PED 97/23/EC Compliant
• Maximum Operating Pressure (MOP)Gas Families 1 and 2: 5 barGas Family 3: 20 barSteam: 4 bar (non shock)Liquids: see chart on page 15
• Suitable for vacuum up to 10-3 torr
• Screwed BSP parallel end connections toISO 7/1
• Blowout proof stem
• Ergonomic lever design
• Optional locking lever - BBV20LL
Brass Ball Valves (BBV) were the original Jet range product. Since their introduction over 25 years ago, millions of Jet range brass ball valves have been installed, withthousands of customers benefiting from their robust, trouble-free service.
The Jet range
Contentspage
Introduction 2
BBV20 Gas Approved BSPP Valves 3
BBV21 WRAS Approved BSPP Valves 4
Options & Accessories for BBV21 Valves 5
BBV22 T-handle WRAS BSPP Valves 5
BBV24 WRAS Approved CxC Valves 6
BBV25 T-handle WRAS CxC Valves 7
BBV26 Gas Approved CxC Valves 7
BBV31 & BBV32 3-Port BSPP Valves 8
BBV36 & BBV37 3-Port BSPP Valves 9
BBV34 Mini BSP Ball Valves 10
BBV35 CxC Service Valves 11
BBV38 Ball Valves for Airlines 12
Pneumatically Actuated Valves 13
Electrically Actuated Valves 14
Performance Data 15
As you would expect, Jet range Brass Ball Valves conformto relevant UK and international standards and approvals,confirming their suitability for use across a wide range ofapplications. See individual products for appropriateapprovals.
EN331:1998European standard for ball valves for use on gas services. The Jet range encompasses valves from 8mm - 100mm (1/4" to 4"), with two or three ports.
End connections are either threaded or compression (CxC)
Operators include steel levers, locking levers, tee handle, nylon wedge levers and electric orpneumatic actuators
Options include stem extensions, locking levers, degreasing for paint or oxygen service.
TagsValves can be supplied with 75mm x 32mmstainless steel tags embossed with up to fourlines of text, each line having up to twentycharacters. Tags are secured with eitherstainless steel wire or black plastic ties.
Water Regulations Advisory Scheme (WRAS) is theUK water industry’s approval scheme. Productsapproved by the scheme comply with therequirements of the Water Supply (Water Fittings)Regulations 1999 and amendments.
Options / Accessories - BBV21 BBV22 Brass Full Bore Ball Valve
5
BBV21 WRAS Approved Full Bore Brass Ball Valve
4
BBV21 WRAS approved full bore brass ball valve
BBV21WRAS Approved Full BoreBrass Ball Valves
• FM Approved in sizes 15mm-50mm(1/2"-2") up to 27.5 bar (400psi)
• PED 97/23/EC compliant
• Maximum Operating Pressure (MOP)Steam: 4 bar (non shock)Liquids: see chart on page 15
• Suitable for vacuum up to 10-3 torr
• Screwed BSP parallel end connections toISO 7/1
• Blowout proof stem
• Ergonomic lever design
• Optional locking lever and stem extension
BBV22 Brass Full Bore Ball ValvesAs BBV21 but with compact T-handle.
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome plated brass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Steel
Nut Steel
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome nickel plating
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Tee Handle Aluminium
Nut Steel
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no.BBV21
Size (") DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight
(kg)ØD A B C
K65661 1/4 8 10.0 51.5 96.0 42.0 SEP 64 5.4 5.4 0.15
K65662 3/8 10 10.0 51.5 96.0 42.0 SEP 64 5.4 6.0 0.14
K65663 1/2 15 14.0 59.0 96.0 46.0 SEP 30 7.2 16.3 0.18
K65664 3/4 20 19.0 67.0 121.0 57.0 SEP 30 14.4 29.5 0.30
K65665 1 25 24.0 81.5 121.0 59.0 SEP 30 18.9 43.0 0.44
K65666 1 1/4 32 30.0 94.0 151.0 73.0 25 19.8 89.0 0.77
K65667 1 1/2 40 38.0 102.5 151.0 79.0 25 42.3 230.0 1.03
K65668 2 50 47.0 123.0 160.0 93.5 25 43.2 265.0 1.76
K65669 2 1/2 65 65.0 152.0 206.0 123.0 25 54.0 541.0 3.71
K65670 3 80 80.0 177.0 206.0 133.0 25 98.1 873.0 5.90
K65671 4 100 100.0 214.0 261.0 165.0 25 117.0 1390.0 10.00
B
C
A
ØD
size 8mm~50mm (1/4" to 2")
size 65mm~100mm (2 1/2" to 4")
B
C
ØD
A
BBV22 brass full bore ball valve
150WSP
B
A
C
ØD
Technical Data
Cat. no.BBV22
Size (") DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight
(kg)ØD A B C
K65681 1/4 8 10.0 51.5 50.0 42.0 SEP 64.0 5.4 5.4 0.14
K65682 3/8 10 10.0 51.5 50.0 42.0 SEP 64.0 5.4 6.0 0.12
K65683 1/2 15 14.0 59.0 50.0 44.5 SEP 30.0 7.2 16.3 0.16
K65684 3/4 20 19.0 67.0 64.0 54.0 SEP 30.0 14.4 29.5 0.27
K65685 1 25 24.0 81.5 64.0 56.5 SEP 30.0 18.9 43.0 0.42
BBV22 brass full bore ball valve
Options / Accessories - BBV21 Locking Lever (LL)Valve fitted with locking lever for security.
9/32" Hasp padlocks supplied separately;• H65025 Keys Alike • H65035 Keys Differ
Stem Extensions (EXT)Valve may be fitted with 50mm stem extension to allowuse with insulated pipework.
Degreasing (DG)Valves can be supplied degreased for oxygen service toBOC specification 50000810 (BBV21DG)
Silicon Free (SF)Silicon free valve for paint processes (BBV21SF)
Technical Data
Cat. no.BBV21LL
Cat. no.BBV21EXT
Cat. no.BBV21DG
Cat. no.BBV21SF
Size(")
DN(mm)
K65751 K65731 K65781 K65761 1/4 8
K65752 K65732 K65782 K65762 3/8 10
K65753 K65733 K65783 K65763 1/2 15
K65754 K65734 K65784 K65764 3/4 20
K65755 K65735 K65785 K65765 1 25
K65756 K65736 K65786 K65766 1 1/4 32
K65757 K65737 K65787 K65767 1 1/2 40
K65758 K65738 K65788 K65768 2 50
- K65739 K65789 K65769 2 1/2 65
- K65740 K65790 K65770 3 80
- K65741 K65791 K65771 4 100
BBV21LL
BBV21EXT extended stem
Padlock for locking lever
BBV25 Brass Full Bore Ball ValveBBV26 Gas Approved Full Bore Ball Valve
7
BBV24 WRAS Approved Full Bore Brass Ball ValveOptions / Accessories - BBV24
6
BBV24WRAS Approved Full BoreBrass Ball Valves
• PED 97/23/EC compliant
• Maximum Operating Pressure (MOP)Steam: 4 bar (non shock)Liquids: see chart on page 15
• Suitable for vacuum up to 10-3 torr
• Compression end connections to BS EN1254 Part 2
• Blowout proof stem
• Ergonomic lever design
• Optional locking lever and stem extension
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End DZR brass
Ball DZR brass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Steel
Nut Brass and steel
B
C
A
ØD
BBV24 WRAS approved full bore brass ball valve
B
A
C
ØD
BBV25 brass full bore ball valve
BBV24 WRAS approved full bore brass ball valve
BBV25 brass full bore ball valve
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no. BBV24
DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight
(kg)ØD A B C
K65853 15 14.5 78.0 96.0 48.0 SEP 30 7.2 16.3 0.22
K65854 22 20.0 90.0 121.0 58.0 SEP 30 14.4 29.5 0.34
K65855 28 25.0 96.0 121.0 62.0 SEP 30 18.9 43.0 0.54
K65856 35 32.0 111.0 151.0 78.0 25 19.8 89.0 0.99
K65857 42 40.0 134.0 151.0 85.0 25 42.3 230.0 1.47
K65858 54 50.0 153.0 160.0 96.5 25 43.2 265.0 1.91
BBV25 Brass Full Bore Ball ValvesAs BBV24 but with compact T-handle.
Valves comply with PED 97/23/EC under Sound Engineering Practice subject to compatibility of materials ofconstruction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no. BBV25
DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight
(kg)ØD A B C
K65863 15 14.5 78.0 50.0 46.0 SEP 30 7.2 16.3 0.21
K65864 20 20.0 90.0 64.0 56.0 SEP 30 14.4 29.5 0.31
K65865 25 25.0 96.0 64.0 60.0 SEP 30 18.9 43.0 0.51
BBV26Gas Approved Full Bore Ball Valves
• Approved to BS EN331: 1998 for GasFamily 1 (natural gas), Family 2 (towngas), Family 3 (LPG’s inc. Calor & Shell)
• PED 97/23/EC compliant
• Maximum Operating Pressure (MOP)Gas Families 1 and 2: 5 barGas Family 3: 20 barSteam: 4 bar (non shock)Liquids: See chart on page 15
• Suitable for vacuum up to 10-3 torr
• Compression end connections to BSEN1254 Part 2
• Blowout proof stem
• Ergonomic lever design
• Optional locking lever - BBV26LL
B
C
A
ØD
BBV26 gas approved full bore ball valve
BBV26 gas approved full bore ball valve
BBV26LL with locking lever
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End DZR brass
Ball DZR brass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Steel
Nut Brass and steel
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no. BBV26
Cat. no. BBV26LL
Size (") DN (mm)Dimensions (mm)
PEDTorquein Nm.
KvWeight
(kg)ØD A B C
K65923 K65993 1/2 15 14.5 78.0 96.0 48.0 SEP 7.2 16.3 0.22
K65924 K65994 3/4 22 20.0 90.0 121.0 58.0 SEP 14.4 29.5 0.34
K65925 K65995 1 28 25.0 96.0 121.0 62.0 SEP 18.9 43.0 0.54
K65926 K65996 1 1/4 35 32.0 111.0 151.0 78.0 19.8 89.0 0.99
K65927 K65997 1 1/2 42 40.0 134.0 151.0 85.0 42.3 230.0 1.47
K65928 K65998 2 54 50.0 153.0 160.0 96.5 43.2 265.0 1.91
BBV24EXT extended stem
Options / Accessories- BBV24 9/32" Hasp padlocks for BBV24LL supplied separately;
• H65025 Keys Alike • H65035 Keys Differ
BBV24LL locking lever
Technical Data
Cat. no.BBV24LL
Cat. no.BBV24EXT
DN(mm)
K65983 K65883 15
K65984 K65884 22
K65985 K65885 28
K65986 K65886 35
K65987 K65887 42
K65988 K65888 54
BBV36 & BBV37 Three Port Brass Ball Valves
9
BBV31 & BBV32 Three Port Brass Ball Valves
8
BBV31 & BBV32Three Port Brass Ball Valves
• Low Cost 3-Way Diverting or Mixing Valves
• T-Port (BBV31) or L-Port (BBV32)
• ISO5211 Actuator Mounting Flange
• 90 or 180 degree operation
• PED 97/23/EC compliant
• Maximum Operating Pressure (MOP)Liquids: see chart on page 15
• Screwed BSP parallel end connections to ISO 7/1
BBV36 & BBV37Three Port Brass Ball Valves
• 3-Way Diverting or Mixing Valves
• T-Port (BBV36) or L-Port (BBV37)
• Four Seats per valve
• 90 degree operation
• PED 97/23/EC compliant
• Maximum Operating Pressure (MOP)Steam: 4 bar (non shock)Liquids: see chart on page 15
• Suitable for vacuum up to 10-3 torr
• Screwed BSP parallel end connections to ISO 7/1
B
C
A
ØD
B
E
C
A
ØD
B
E
C
A
ØD
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome plated brass
‘O’ Rings FKM
Seats PTFE
Thrust Washers PTFE
Lever Steel
Screw Zinc plated
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome plated prass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Aluminium
Screw Steel
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no.BBV31
Cat. no.BBV32
Size (") DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight (kg)
BBV31Weight (kg)
BBV32ØD A B C
K65611 K65621 1/4 8 10 52 115 60 SEP 25 6.0 1.5 0.30 0.34
K65612 K65622 3/8 10 10 52 115 60 SEP 25 6.0 1.8 0.34 0.32
K65613 K65623 1/2 15 15 64 115 62 SEP 25 6.0 3.9 0.39 0.41
K65614 K65624 3/4 20 20 74 115 73 SEP 16 6.0 7.9 0.57 0.61
K65615 K65625 1 25 25 89 115 76 SEP 16 6.0 13.0 0.85 0.91
K65616 K65626 1 1/4 32 32 100 115 79.5 10 6.0 20.7 1.15 1.28
K65617 K65627 1 1/2 40 40 110 170 95 10 17.0 38.7 1.84 2.00
K65618 K65628 2 50 49.5 130 170 101 10 17.0 54.0 2.68 3.17
K65620 K65630 3 80 80 197 260 152 6 31.0 145.7 9.01 9.50
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
Technical Data
Cat. no.BBV36
Cat. no.BBV37
Size (") DN (mm)Dimensions (mm)
PEDPNBar
Torquein Nm.
KvWeight (kg)
BBV31Weight (kg)
BBV32ØD A B C E
K65501 K65511 1/4 8 11 63.25 134.0 77.5 80.5 SEP 40 5.4 2.8 0.77 0.77
K65502 K65512 3/8 10 11 63.25 134.0 77.5 80.5 SEP 40 5.4 3.0 0.73 0.73
K65503 K65513 1/2 15 11 63.25 134.0 77.5 80.5 SEP 40 7.2 3.6 0.76 0.76
K65504 K65514 3/4 20 15 74.70 170.0 94.0 93.4 SEP 40 14.4 6.0 1.25 1.25
K65505 K65515 1 25 20 85.15 205.0 107.0 107.3 SEP 25 18.9 11.0 1.91 1.92
K65506 K65516 1 1/4 32 25 94.50 205.0 111.0 118.0 16 19.8 16.0 2.61 2.65
K65507 K65517 1 1/2 40 32 114.00 205.0 117.5 141.0 16 42.3 25.5 4.05 4.25
K65508 K65518 2 50 40 130.30 260.0 132.0 164.0 16 43.2 37.5 6.60 6.70
BBV31/32 three port brass ball valve
BBV31/32 three port brass ball valve
Flow paths - BBV31 T-Port
Flow paths - BBV32 L-Port
180º operation 90º operation (can be set withflow to either right or left)
180º operation 90º operation (can be set withflow to either right or left)
BBV36/37 three port brass ball valve BBV36/37 three port brass ball valve
BBV36 - rotate stem to required position prior to fitting lever
BBV37 - rotate stem to required position prior to fitting lever
Flow paths - BBV37 T-Port
Flow paths - BBV36 T-Port
configuration 1 configuration 2 configuration 3
configuration 1 configuration 2 configuration 3 configuration 4
BBV35 DZR Brass Mini Service Valves
11
BBV34 Mini Brass Ball Valves
10
BBV34Mini Brass Ball Valves
• Compact design
• Reduced bore, DN8 & DN10 = 8mm bore,DN15 = 10mm bore
• Machined from brass stampings
• PED 97/23/EC compliant
• 90º Lever rotation with positive stops
• Bi-directional
• Pressure range 0-16 bar
• Temperature range -10ºC to +90ºC
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body Sand blasted chrome plated brass
Ball & Stem Chrome plated brass
Seats PTFE
‘O’ Rings Viton
Lever Glass reinforced nylon
B
A
C
B
C
A
A
B
C
B
A
C
Valves comply with PED 97/23/EC under Sound Engineering Practice for use with Group I and II Liquids and Group II Gases subject to compatibility of materials ofconstruction with line fluid.
Technical Data
Cat. no. Fig. no.Size(")
DN(mm)
DimensionsPED
PNBar
Weight(kg)A B C
K65281 1/4 8 41.5 78.5 31.0 SEP 16 0.10
K65282 34FFL 3/8 10 41.5 78.5 31.0 SEP 16 0.10
K65283 1/2 15 47.0 78.5 33.0 SEP 16 0.14
K65291 1/4 8 41.5 78.5 31.0 SEP 16 0.10
K65292 34MFL 3/8 10 40.0 78.5 31.0 SEP 16 0.09
K65293 1/2 15 46.0 78.5 33.0 SEP 16 0.12
K65301 1/4 8 41.5 40.0 32.0 SEP 16 0.10
K65302 34FFT 3/8 10 41.5 40.0 32.0 SEP 16 0.10
K65303 1/2 15 47.0 40.0 34.0 SEP 16 0.14
K65311 1/4 8 41.5 40.0 32.0 SEP 16 0.10
K65312 34MFT 3/8 10 40.0 40.0 32.0 SEP 16 0.09
K65313 1/2 15 46.0 40.0 34.0 SEP 16 0.12
BBV34FFL mini brass ball valve
BBV34MFL mini brass ball valve
BBV34FFT mini brass ball valve
BBV34MFT mini brass ball valve BBV34MFT mini brass ball valve
BBV34FFT mini brass ball valve
BBV34MFL mini brass ball valve
BBV34FFL mini brass ball valve
BBV35DZR Brass Mini Service Valves
• PED 97/23/EC compliant
• Compression end connections to BSEN1254 Part 2
• 90º lever rotation with positive stops
• Yellow brass or chrome plated finish
• Suitable for screwdriver operation orsupplied fitted with black reinforced nylonlever
• Optional polished aluminium or red or bluereinforced nylon levers
• Pressure range 0-16 bar
• Temperature range -10ºC to +90ºC
ØA ØC
B
BBV35 CP with black lever
BBV35 CP - screwdriver operation
BBV35 CP with blue lever
BBV35 CP with red lever
BBV35 CP with aluminium T-handle
brass finish - with lever
brass finish - screwdriver operation
Valves comply with PED 97/23/EC under Sound Engineering Practice for use with Group II Liquids subject to compatibility of materials of construction with line fluid.
Technical Data
Cat. no.BBV35
Operation FinishSize(")
DN(mm)
Dimensions (mm)PED
PNBar
Weight(kg)ØA B ØC D
K64763 Screwdriver DZR Brass 1/2 15 15.2 66 10 - SEP 16 0.16
K64764 Screwdriver DZR Brass 3/4 22 22.2 68 13.5 - SEP 16 0.24
K64773 Lever DZR Brass 1/2 15 15.2 66 10 29.2 SEP 16 0.16
K64774 Lever DZR Brass 3/4 22 22.2 68 13.5 31.8 SEP 16 0.25
K64783 Screwdriver Chrome 1/2 15 15.2 66 10 - SEP 16 0.16
K64784 Screwdriver Chrome 3/4 22 22.2 68 13.5 - SEP 16 0.24
K64793 Lever Chrome 1/2 15 15.2 66 10 29.2 SEP 16 0.16
K64794 Lever Chrome 3/4 22 22.2 68 13.5 31.8 SEP 16 0.25
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Valve Body DZR brass
Stem Nickel plated DZR brass
Ball Nickel plated DZR brass
Ball Gaskets PTFE
Stem Sealing Rings NBR
Lever Nylon
BBV35 DZR brass mini service valve
Optional Levers• K64786 Blue nylon reinforced lever• K64785 Red nylon reinforced lever• K64799 Polished aluminium T-handle
ØA ØC
B
D
BBV35 DZR brass mini service valve with lever
Pnuematically Actuated Brass Ball Valves
13
BBV38 Brass Ball Valve for Compressed Air Lines
12
BBV38Brass Ball Valves forCompressed Air Lines
• Exhaust port through ball relievesdownstream pressure when valve is inclosed position
• Lockable lever (requires 9/32" (7mm)Hasp padlock)
• Maximum Operating Pressure (MOP)10 bar
• Screwed BSP parallel end connections to ISO/7
• Full bore
• Must be installed with flow in direction ofarrow on valve.
Pnuematically ActuatedBrass Ball Valves
We test and assemble actuated packages atour dedicated ISO9001:2000 certified ValveActuation Center. While we recommend ourown actuators, we are happy to supply Jetrange valves mounted with actuators andaccessories of your choice to meet sitepreferences and specifications.
• Our pneumatic actuators are of a doublerack and pinion design, with ISO 5211mounting connections, enabling simpleconnection to most quarter-turn valves.
• An anti-blowout key provides a firm lock tothe pinion, minimising wear by eliminatingmovement under pressure.
• Spring return actuators incorporate aunique spring retainer construction,offering improved safety whilst dismantlingand reassembling.
• Springs and moving parts are lifetimelubricated, reducing maintenance costs.
• Bodies are hard anodised aluminium,which provides better protection fromcorrosion, enhanced surface hardness andsuperior wear reistance.
Optional ExtrasWhere required we can fit any ancillaryitems, including:
• Solenoid valves
• Switchboxes
• Positioners - Pnuematic, Electro-Pnuematic or Digital
• Manual overrides
BBV38 brass ball valve for compressed air lines
BBV38 brass ball valve for compressed air lines
BBV38 brass ball valve for compressed air lines
B
C
ØD
A
Materials - Main Components
CCoommppoonneenntt MMaatteerriiaall
Body, Stem & End Nickel plated brass
Ball Chrome plated brass
‘O’ Rings NBR
Seats PTFE
Stem Seals PTFE
Lever Steel
Nut Steel
9/32" Hasp padlocks supplied separately;
• H65025 Keys Alike • H65035 Keys Differ
Valves are CE marked to PED 97/23/EC where allowed or comply under Sound Engineering Practice for use with Groups I and II Gases and Liquids, subject to compatibility ofmaterials of construction with line fluid. Flow co-efficient ∆pKv is flow in m³/h with a 1 bar static pressure drop across the valve.
D/A = Double Acting, S/R = Spring Return (Single Acting) For Spring Return please state "Spring Open" or "SpringClose" on order *100mm with Spring Close Actuator, **100mm with Spring Open Actuator
Note: Valves pictured are direct mounted. Where this isnot possible, a mounting kit will be used. Actuatedpackages listed have actuators sized for valvesoperating with a clean liquid line media and having amaximum differential pressure of 10 bar. We would bepleased to offer solutions for alternative applicationsupon request.
Technical Data
Cat. No.BBV38
Size(")
DN(mm)
Dimensions (mm)PED
PNBar
Torquein Nm.
KvWeight
(kg)ØD A B C
K65321 1/4 8 10 52 96 42 SEP 10 5.4 5.4 0.20
K65322 3/8 10 10 52 96 42 SEP 10 5.4 6 0.19
K65323 1/2 15 15 62 96 46 SEP 10 7.2 16.3 0.22
K65324 3/4 20 20 69 123 58 SEP 10 14.4 29.5 0.36
K65325 1 25 25 83 123 63 SEP 10 18.9 43 0.55
When valve is open, air flows uninterrupted. Closing the valve aligns the exhaust port in the ballwith the outlet port in the body, safely venting thedownstream line.
Size(")
DN(mm)
BBV23 2-Port BBV28 3-Port 'T' BBV29 3-Port 'L'
D/A S/R D/A S/R D/A S/R
1/4 8 K84021 K84001 K84051 K84041 K84071 K84061
3/8 10 K84022 K84002 K84052 K84042 K84072 K84062
1/2 15 K84023 K84003 K84053 K84043 K84073 K84063
3/4 20 K84024 K84004 K84054 K84044 K84074 K84064
1 25 K84025 K84005 K84055 K84045 K84075 K84065
1 1/4 32 K84026 K84006 K84056 K84046 K84076 K84066
1 1/2 40 K84027 K84007 K84057 K84047 K84077 K84067
2 50 K84028 K84008 K84058 K84048 K84078 K84068
2 1/2 65 K84029 K84009 - - - -
3 80 K84030 K84010 - - - -
4 100 K84031 K84011* - - - -
4 100 K84012** - - - -
BBV23 2-Port
BBV28/BBV29 3-Port
K84016 NAMUR Solenoid Valve (State voltage on order)
K84017 IP67 Switchbox
Performance Charts - For Liquids
15
Electrically Actuated Brass Ball Valves
14
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
10
20
30
40
50
60
70
pres
sure
(bar
)
8-10mm
15-25mm32-100mm
temperature (ºC)
32-100mm15-25mm
8-10mm
saturated steam line
LTHW
MTHW
HTHW
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
10
20
30
40
50
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
saturated steam line
8-20mm
25mm
32-50mm
BBV20 / BBV21 / BBV22
BBV36 / BBV37
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
5
10
15
20
25
30
35
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
saturated steam
line
15-28mm
35-54mm
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
2
4
6
8
10
12
14
16
18
20
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
satur
ated s
team
line
BBV24 / BBV25 / BBV26
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
5
10
15
20
25
30
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
32-50mm
saturated stea
m line
8-15mm
20-25mm
80mm
BBV31 / BBV32
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
5
10
15
20
25
30
35
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
saturated steam
line
8-20mm
25mm
32-50mm
BBV28 / BBV29
0º
0
100
50
45º 90º
flow
rate
(%)
valve opening vs flow rate
valve opening ( º )
Typical Flow Charactersitics for Two-Port Ball Valves
0
-20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200
10
20
30
40
50
pres
sure
(bar
)
temperature (ºC)
LTHW
MTHW
HTHW
saturated steam line
8-50mm
65mm
80-100mm
BBV23 BBV34 / BBV35
Electrically ActuatedBrass Ball Valves
Our Electrically actuated ball valves arepacked with features to make fitting andowning them a trouble-free experience.
• Multi-voltage with auto-voltage sensing.
• LED status light to indicate operationalstatus of actuator.
• Electronic over-torque protection againstvalve jams.
• Thermostatic anti-condensation heater.
• Manual override for emergency handoperation.
• IP65 weatherproof anti-corrosion and UVprotected Polyamide housing.
• Local visual position indicator.
• All external electrical connections viasupplied DIN plugs
Optional Extras• Plug and play failsafe conversion kits.
• Plug and play modulating kit.
Voltage• Low voltage: 12 to 60V, AC or DC
• High voltage: 80 to 240V, AC or DC
Note: Valves pictured are direct mounted, where this isnot possible, a mounting kit will be used. Actuatedpackages listed have actuators sized for valvesoperating with a clean liquid line media and having amaximum differential pressure of 10 bar. We would bepleased to offer solutions for alternative applicationsupon request.
Size(")
DN(mm)
BBV23 2-Port BBV28 3-Port 'T' BBV29 3-Port 'L'
Low Volt High Volt Low Volt High Volt Low Volt High Volt
1/4 8 K85001 K85021 K85041 K85051 K85061 K85071
3/8 10 K85002 K85022 K85042 K85052 K85062 K85072
1/2 15 K85003 K85023 K85043 K85053 K85063 K85073
3/4 20 K85004 K85024 K85044 K85054 K85064 K85074
1 25 K85005 K85025 K85045 K85055 K85065 K85075
1 1/4 32 K85006 K85026 K85046 K85056 K85066 K85076
1 1/2 40 K85007 K85027 K85047 K85057 K85067 K85077
2 50 K85008 K85028 K85048 K85058 K85068 K85078
2 1/2 65 K85009 K85029 - -
3 80 K85010 K85030 - -
4 100 K85011 K85031 - -
As defined in DOE/PSA Standard Specification (M&E) No. 3.LTHW = A system which operates at temperatures up to 95ºC but which is not
part of an MTHW or HTHW injection system.MTHW = A pressurised system, either open or closed to the atmosphere, which
operates at temperatures above 95ºC and up to 120ºC.HTHW = A pressurised system, closed to the atmosphere, which operates at
temperatures above 120ºC and up to 150ºC.Steam = Steam heating and/or distribution systems with working gauge
pressure up to a maximum of 10 bar.
BBV23 2-Port
BBV28/BBV29 3-Port
Pipe Center is the specialist supplier ofcommercial heating plant and pipe systems.
Branches offer a range of products includingboilers, water heaters, radiators, pumps
and commercial showers.
Pipe Center also stock the widest ranges ofpipes, fittings and valves in:
Branch locations
ref:2865
Whilst every care has been taken to ensure that theinformation included in this document was
accurate at the time of printing, we reserve the rightto change specifications at any time. The
photographs reproduced in this publication arewithin the constraints of the printing process and
are NOT to be used for matching purposes. E&OE.
for a list of the branch locations please visit:
www.pipecenter.co.uk
• Carbon steel • Pressure plastics
• Copper • Stainless steel
• Brass • Bronze
For further information about Jet range products, please visit
www.jetrange.co.uk