January | February 2016 PRECISION MANUFACTURING | 132016 BUYER'S GUIDE January | February 2016 PRECISION MANUFACTURING | 132016 BUYER'S GUIDE

Aluminum Coil ....................................... 14Aluminum Extrusion - Plate & Sheet .......................................... 14Assembly ................................................. 14Coil Springs / Wire Forms ................... 14Cold Heading ......................................... 14Cutting Tools .......................................... 14Deburring ................................................ 14Deep Hole Drilling ................................ 14Electrical Discharge Machining ....... 14Fabricating .............................................. 14Foundries & Casting ............................ 14Gear Cutting & Broaching ............................................ 15Heat Treating .......................................... 15Honing - Lapping & Finishing .......... 15

Laser Cutting .......................................... 15Laser Marking ........................................ 15Machine Tool Manufacturer (OEM) ............................ 15Machining - Large Capacity ..... 15 - 16Metal Finishing ..................................... 16Metal Spinning ...................................... 16Micro Machining ................................... 16Milling .............................................. 16 - 18Mold Making .......................................... 18Nanoscale Manufacturing ................. 18Plastic Injection Molding ................... 18Plating / Coatings ................................. 18Powder Coating .................................... 18Precision Grinding ........................ 18 - 19Production Machining ................19 - 20

Prototypes / Short Run .............. 20 - 21Punching ................................................. 21Sawing ...................................................... 21Screw Machining .................................. 21Sheet & Plate Rolling ........................... 21Sheet Metal Fabrication ..................... 21Stamping ................................................. 21Tool & Die ................................................. 21Tooling - Plastic Extrusion .................. 21Tube Bending & Fabrication ............. 21Turning ................................... ......... 21 - 22Turning - Swiss ....................................... 22Water Jet Cutting .................................. 22Welding .....................................................22Welding - Robotic ................................. 22

Abrasives ................................................. 23Automation Integration ..................... 23Calibration - Test & Inspection ......... 23Cleaning Supplies ................................ 23Coolants / Lubricants .......................... 23Cutting Tools .......................................... 23Gauging ........................................... ........ 23Hydraulic / Pneumatics ...................... 23

Lubrication Equipment & Systems ................................................ 23Machine and Electrical Repair ......... 23Machine Tool Sales Chip Cutting ........................ 23 - 24Machine Tool Sales Fabrication ................................... 24Machine Tool Sales (used) ................ 24Metal Service Center ........................... 24

Metrology ................................................ 24 Packaging ................................................ 24Plastic Sheet Rod & Tube ................... 24Robotics / Automation ....................... 24Safety Equipment ................................. 24Supply Sales ........................................... 24Tool Repair / Servicing ........................ 24Workholding .......................................... 24

Accounting ............................................. 25Banking / Financing ............................. 25Capital Equipment Financing .......... 25Computer Software & Training ........ 25Construction .......................................... 25Economic Development .................... 25Employee Benefits ............................... 25

Engineering & Design Services ........ 25Insurance ................................................. 25ISO Certification Services .................. 25Legal .......................................................... 25Mergers & Acquisitions ...................... 25Programming ......................................... 26R&D Tax Credit Consultants .............. 26

Real Estate ............................................... 26Recycling ................................................. 26Retirement Services .............................. 26Shipping & Delivery ............................. 26Staffing ..................................................... 26Technical Colleges / Education ........ 26Wealth Management .......................... 26

MANUFACTURER

DISTRIBUTOR

PROFESSIONAL SERVICES

2016B U Y E R ’ S G U I D E

14 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

ALUMINUM COILErickson Metals of MN, Inc. Luke Harned (763) 785-2340 lharned@ericksonmetalsmn.comQuality Metals, Inc. Jason King (651) 545-2877 jason.king@qualitymetalsinc.com

ALUMINUM EXTRUSION - PLATE & SHEETAlexandria Industries Tom Jensen (800) 568-6601 tjensen@alexandriaindustries.comErickson Metals of MN, Inc. Luke Harned (763) 785-2340 lharned@ericksonmetalsmn.comLou-Rich, Inc. Doug Olson (507) 377-5330 dolson@lou-rich.comMidwest Steel Supply Company Brandon Walton (612) 333-6868 bw@midweststeelsupply.comQuality Metals, Inc. Jason King (651) 545-2877 jason.king@qualitymetalsinc.com

ASSEMBLYAtscott ManufacturingCompany, Inc. John Norris (320) 629-2501 info@atscott.comCondux International Doug Mulder (507) 387-8063 dougm@condux.comContinental Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 eric@cem-web.comEagle Tool & Design Co. Julie Ulrich (763) 784-7400 julrich@eagletoolinc.comGraco Inc. Heather Bittle (612) 623-6431 hbittle@graco.comICA Corporation Steve Hoaglund (763) 428-2800 steveh@icacorp.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comMetal Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 trisha@metal-craft.comMICO, Inc. John (Sonny) Suserud (507) 386-4058 sonnys@mico.comMINNCOR Industries Brenda Chandler (651) 361-7500 bchandler@minncor.com

TBEI / Crysteel Mfg Joe Paulsen (507) 726-2728 jpaulsen@tbei.comTEAM Industries Jim Russ (218) 694-3550 jimruss@team-ind.comVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.comV-TEK, Inc. Christina James (507) 387-2039 c.james@vtekusa.com

COIL SPRINGS / WIRE FORMSWestern Spring Manufacturing Alex Altstatt (651) 224-1721 alex@westernspring.com

COLD HEADINGFastenal Manufacturing Tim Borkowski (507) 453-8000 tborkows@fastenal.com

CUTTING TOOLSCommand Tooling Systems LLC Bahti Hanedar (763) 576-6910 bhanedar@commandtool.comFraisa USA, Inc. Mathieu Tapp (651) 636-8488 mtapp@fraisausa.comMidwest Industrial ToolGrinding, Inc. Eric Lipke (320) 455-0535 info@mitgi.usNTM, Inc. Pat Mullins (763) 780-1420 patm@ntminc.com

DEBURRINGArrow Cryogenics, Inc. Curt Salo (763) 780-3367 curt@arrowcryogenics.comCo-Operative Plating Co. Rusty Ekness (651) 645-0787 rekness@coopplating.comEngineered Finishing Corp. Danforth Messerly (763) 785-9278 dmesserly@engfinish.comTechnology Reps Mike Neeley (651) 636-6966 mikeneeley@comcast.net

DEEP HOLE DRILLINGComet Tool, Inc. Jim Freitag (952) 935-3798 jim.freitag@comettoolinc.comDatum-A-Industries, Inc. Eric Geyen (763) 479-1133 info@datum-manifolds.com

Sandvik Coromant John Depies (715) 410-1521 john.depies@sandvik.comTooling Science, Inc. Bryce Kleven (763) 425-6001 bryce@tlscience.comAmerican Machine &Gundrilling Co., Inc. Chuck Berg, Jr. (763) 425-3830 chucksr@amgundrilling.com

ELECTRICAL DISCHARGE MACHININGABA Water Systems, Inc. Tim Weaver (800) 257-1271 tim@abawatersystems.comAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 shoffmann@accuprompt.comAgrimson Tool Company, Inc. Gary Agrimson (763) 566-3446 mailroom@agrimsontool.comAndrew Tool & Machining Company Bruce Hanson (763) 559-0402 brucehanson@andrewtool.comAurora Micro Machine Eric Nelson (763) 682-6474 eric.nelson@auroramicromachine.comAutomated Randy Squier (763) 576-6946 rsquier@automatedextrusion.comBrenk Brothers, Inc. Jeff Brenk (763) 784-5621 jeff@brenkbrothers.comDie Technology, Inc. Dale Skoog (763) 424-9677 dskoog@dietechnology.comDigital Tool & Automation Dave Ackland (763) 421-0400 dackland@digital-tool.comDuo-Tec Tool Company Dale Hanken (763) 425-5005 dhanken@duotectool.comDynamic Group Steve Kalina (763) 780-8674 skalina@dynamicgroup.comExcelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 etc1gl@frontiernet.netImaGineering Machine Inc. Jesse Schelitzche (952) 922-9311 js@imagineeringmachine.comModified Tool, Inc. John Kruse (218) 763-6030 modifiedtool@emily.netMold-Tech, Inc. Jon Lee (763) 497-7500 jlee@mold-techinc.com

MultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comQualitek Engineering &Manufacturing Inc. MichaelNepsund (763) 544-9507 miken@qualitek-eng.comSodick, Inc. Joel Manns (651) 319-7259 jmanns@sodick.comTooling Science, Inc. Bryce Kleven (763) 425-6001 bryce@tlscience.comTop Tool Company Duane Kari (763) 786-0030 dakari@toptool.comTwin City EDM & Manufacturing, Inc. Steve Lindell (763) 783-7808 slindell@twincityedm.comZTECH Precision Don Zoubek (763) 635-0033 don@ztechprecision.com

FABRICATINGABA Water Systems, Inc. Tim Weaver (800) 257-1271 tim@abawatersystems.comAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 shoffmann@accuprompt.comAgrimson Tool Company, Inc. Gary Agrimson (763) 566-3446 mailroom@agrimsontool.comAndrew Tool & Machining Company Bruce Hanson (763) 559-0402 brucehanson@andrewtool.comAurora Micro Machine Eric Nelson (763) 682-6474 eric.nelson@auroramicromachine.comAutomated Randy Squier (763) 576-6946 rsquier@automatedextrusion.comBrenk Brothers, Inc. Jeff Brenk (763) 784-5621 jeff@brenkbrothers.comDie Technology, Inc. Dale Skoog (763) 424-9677 dskoog@dietechnology.comDigital Tool & Automation Dave Ackland (763) 421-0400 dackland@digital-tool.comDuo-Tec Tool Company Dale Hanken (763) 425-5005 dhanken@duotectool.comDynamic Group Steve Kalina (763) 780-8674 skalina@dynamicgroup.com

Excelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 etc1gl@frontiernet.netImaGineering Machine Inc. Jesse Schelitzche (952) 922-9311 js@imagineeringmachine.comModified Tool, Inc. John Kruse (218) 763-6030 modifiedtool@emily.netMold-Tech, Inc. Jon Lee (763) 497-7500 jlee@mold-techinc.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comQualitek Engineering &Manufacturing Inc. Michael Nepsund (763) 544-9507 miken@qualitek-eng.comSodick, Inc. Joel Manns (651) 319-7259 jmanns@sodick.comTooling Science, Inc. Bryce Kleven (763) 425-6001 bryce@tlscience.comTop Tool Company Duane Kari (763) 786-0030 dakari@toptool.comTwin City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 slindell@twincityedm.comZTECH Precision Don Zoubek (763) 635-0033 don@ztechprecision.com

FOUNDRIES & CASTINGCarley Foundry, Inc. Kevin Stensrud (763) 205-8933 kevin.stensrud@carleyfoundry.comCraft, Pattern & Mold Anthony Cremers (763) 675-3169 tony@craftpattern.comDotson Iron Castings Mark Maas (507) 345-5018 mmaas@dotson.comNorthern Iron & Machine Ray Van Allen (651) 778-3374 rvanallen@northernim.comSmith Foundry Company Jim Pint (612) 729-9395 pint_jim@smithfoundry.comTechnical Die-Casting, Inc. Randy Walters (800) 525-3168 randyw@tech-die-casting.com

MANUFACTURER

January | February 2016 PRECISION MANUFACTURING | 152016 BUYER'S GUIDE

GEAR CUTTING & BROACHINGAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 shoffmann@accuprompt.comColumbia Gear Corp. Jim Hill (320) 356-7301 jhill@columbiagear.comInternational PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 dmeyer@ipminc.comTwin City Gear Company Max Fenna (763) 780-9780 tcgear@goldengate.netVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.com

HEAT TREATINGBodycote Thermal Processing Frank Friedmann (952) 944-5500 frank.friedmann@bodycote.comCo-Operative Plating Co. Rusty Ekness (651) 645-0787 rekness@coopplating.comMed-Tek, Inc. Randy Duffy (612) 789-3527 randy@med-tekinc.com

HONING - LAPPING & FINISHINGLake Engineering, Inc. Steve Magnuson (952) 473-5485 stevem@lakeengineering.comMinnesota Grinding, Inc. David Schranck (763) 535-4445 david.schranck@ minnesotagrinding.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comTwin City Honing, Inc. Larry Bopp (952) 894-1730 boppld@yahoo.comVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.com

LASER CUTTINGAnderson Dahlen, Inc. David Knoll (763) 852-4700 KNOD@andersondahlen.comBranch ManufacturingCompany, Inc. Tim Fairbanks (651) 674-4441 timf@branchmfg.comCorchran, Inc Tom Westphal (507) 833-0229 twestphal@corchran.com

H & F Manufacturing, Inc. Steve Farniok (763) 493-5606 stevef@hfmfg.comHibbing Fabricators, Inc. Sandy Bryant (218) 262-5575 sandy@hibfab.comJones Metal, Inc Toby Begnaud (507) 625-4436 tbegnaud@jonesmetalproducts.comMetal Services of Blooming Prairie, Inc. Dennis Heimerman (507) 583-2144 dennyh@metal-services.comMillerbernd Laser Farid Currimbhoy (320) 485-5458 fcurrimbhoy@millerberndlaser.comOlympic Steel, Inc. Tom Ehlers (763) 544-7100 tehlers@olysteel.comStates ManufacturingCorporation John Johnston (763) 588-0536 johnj@statesmfg.comWyoming Machine, Inc. Lori Tapani (651) 462-4156 ltapani@wyomingmachine.com

LASER MARKING401 Manufacturing Inc. Mike Anderson (763) 205-9040 401manufacturing@gmail.comArrow Cryogenics, Inc. Curt Salo (763) 780-3367 curt@arrowcryogenics.comCinch Connectivity Solutions Jeff Norell (507) 833-6515 jeff.norell@emerson.comMorris Midwest Craig Hahne (763) 424-5622 chahne@morrismidwest.comQuality Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 timg@qualitymachine.com

MACHINE TOOL MANUFACTURER (OEM)Condux International Doug Mulder (507) 387-8063 dougm@condux.comD/F Machine Specialties, Inc. Steve Moerke (507) 625-6200 sales@dfmachinespecialties.comJ&J Machine, Inc. John Lenz (763) 421-0114 sales@jandjmachine.comMatsuura Machinery USA Craig St. John (651) 289-9700 Craig.StJohn@matsuurausa.com

Midwest Industrial Tool Grinding, Inc. Eric Lipke (320) 455-0535 info@mitgi.usMilltronics CNC Machines Sara Dvorak (952) 442-1410 sdvorak@milltronics.netPrecision Tool Technologies, Inc. Jim Goerges (218) 454-0434 jim@precisiontooltech.comV-TEK, Inc. Christina James (507) 387-2039 c.james@vtekusa.com

MACHINING - LARGE CAPACITYAitkin Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 jwc@aiw.comAnderson Dahlen, Inc. David Knoll (763) 852-4700 KNOD@andersondahlen.comBTD Tooling Division Craig Rix (952) 469-2423 craig.rix@btdmfg.comContinental Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 eric@cem-web.com

Hutchinson Manufacturing, Inc. Tom Daggett (320) 587-4653 tdaggett@hutchmfg.comJonaco Machine LLC Bill Russell (952) 448-5544 sales@jonaco.comKato Engineering Russell Scheller (507) 625-4011 russell.scheller@emerson.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.com

MANUFACTURER

Cutting Toolsand Shop Supplies

3601 29th Avenue NE • Minneapolis, MN 55418 • www.walterhammond.com

Same Day Delivery ServiceLarge Inventory of Cutting ToolsVending & Integrated Supply Programs

• Abrasives • Cutting Tools• Gages • Shop Supplies• Precision Tools • Vending

16 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

MANUFACTURER

MACHINING - LARGE CAPACITY CONTINUEDMachining Technology Laurent Deconinck (763) 571-1771 ldeconinck@ machining-technology.comNETTwork Mfg. Inc. Aaron Netter (320) 654-8352 aaron@nettworkmfg.comOlympic Steel, Inc. Tom Ehlers (763) 544-7100 tehlers@olysteel.comPanther Precision Machine, Inc. Tom Olson (763) 586-9651 tolson@pantherprecision.comProduction Engineering Corp. Mike Albers (612) 788-9123 mhalbers@pecorp.netTEAM Industries Jim Russ (218) 694-3550 jimruss@team-ind.comWSI Industries, Inc. Benjamin Rashleger (763) 295-9202 brashleger@wsci.com

METAL FINISHINGArrow Cryogenics, Inc. Curt Salo (763) 780-3367 curt@arrowcryogenics.com

CAB Construction Karla Hansen (507) 625-2233 karla@cabconstruction.comCo-Operative Plating Co. Rusty Ekness (651) 645-0787 rekness@coopplating.comCurtiss-Wright Mark Hockley (651) 780-3202 mark.hockley@cwst.comD & B Plating Company Vince Wheeler (763) 784-8038 vince@dugasbowers.comEngineered Finishing Corp. Danforth Messerly (763) 785-9278 dmesserly@engfinish.comHard Chrome, Inc. Dick Walters (612) 788-9451 sales@hardchromeplating.netMicro Parts Inc. Robert Nichols (651) 452-1017 robert@mpi-dms.comPowder Coating Technologies, Inc. Kent Kienitz (763) 559-4779 kent@powdercoatingtech.comPrecision Coatings, Inc. Linda Grundtner (651) 641-0878 sales@precisioncoatings.com

Twin City Plating Company Ben Minger (612) 331-8895 ben@twincityplating.comWolkerstorfer Co., Inc. Kurt Weamer (651) 636-0720 kweamer.wci@gmail.com

METAL SPINNINGGlenn Metalcraft, Inc. Joseph Glenn (763) 389-5355 jglenn@glennmetalcraft.com

MICRO MACHININGAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 shoffmann@accuprompt.comAurora Micro Machine Eric Nelson (763) 682-6474 eric.nelson@auroramicromachine.comChallenge Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 carrieb@challengemachine.comCNH Machine Steve Swain (763) 572-0662 sswain@cnhmachine.comDie Technology, Inc. Dale Skoog (763) 424-9677 dskoog@dietechnology.com

Micro-Matics Inc. Rick Paulson (763) 780-2700 rick@micro-matics.comMold-Tech, Inc. Jon Lee (763) 497-7500 jlee@mold-techinc.comPermac Industries Darlene Miller (952) 894-7231 dmiller@permacindustries.comrms Lee Zachman (763) 786-1520 lzachman@machine.com

MILLING401 Manufacturing Inc. Mike Anderson (763) 205-9040 401manufacturing@gmail.comA-1 Engineering Todd Craft (763) 786-8710 todd.craft@a1eng.comAce Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 kyle@acecuttergrinding.comAeroSystems Engineering David Myren (651) 220-1339 david.myren@aseholdings.comAnderson Automatics, Inc. Doug Anderson (763) 533-2206 douga@andersonautomatics.com

Applied Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 phenderson@appliedvacuum.comAPT CNC Inc. Brian Mayo (507) 931-5425 brianmayo@aptcnc.comBeaver Machine & Tool Inc. Jay Groth (763) 535-2204 beavshack@beavermachine.comBizal Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 bizalmfg@bizalmfg.comBoring Machine Corporation Tom Chacon (763) 786-0100 tomchacon@bormac.comBowman Tool & Machining Angela Bowman (507) 286-1400 arb@btmcnc.comBrenk Brothers, Inc. Jeff Brenk (763) 784-5621 jeff@brenkbrothers.comCass Screw Machine Products Company Steve Wise (763) 535-0501 steve@csmp.comC-Axis Inc. Jeff Haley (763) 478-8982 jeff@c-axis.com

YOUR LOCAL CONTACT INFORMATION:

ELLISON TECHNOLOGIES IS THE NEW DOOSAN

DISTRIBUTOR FOR MINNESOTA, WESTERN WISCONSIN,

NORTH & SOUTH DAKOTA.

We are here to support Doosan machine tool products, services and spare parts.

Sales: (763)545-9699 | Service: (763)656-5126

Parts: (888) 207-2787

WWW.ELLISONTECHNOLOGIES.COM

January | February 2016 PRECISION MANUFACTURING | 172016 BUYER'S GUIDE

MANUFACTURER

Challenge Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 carrieb@challengemachine.comCheetah Precision, Inc. Manfred Niedernhoefer (651) 633-4566 cheetah@cheetahprecision.comColumbia Precision Machine Corp. Gilbert Baldwin (952) 890-1003 gbaldwin@columbiapmc.comComet Tool, Inc. Jim Freitag (952) 935-3798 jim.freitag@comettoolinc.comCommand Tooling Systems LLC Bahti Hanedar (763) 576-6910 bhanedar@commandtool.comCraft, Pattern & Mold Anthony Cremers (763) 675-3169 tony@craftpattern.comCustom Mold & Design Bruce Cerepak (763) 535-2334 bcerepak@custommold.netDahlquist Machine Inc. Jeff Dahlquist (763) 755-7575 jdahlquist@dahlquistmachine.comDatum-A-Industries, Inc. Eric Geyen (763) 479-1133 info@datum-manifolds.com

Digital Tool & Automation Dave Ackland (763) 421-0400 dackland@digital-tool.comDomaille Engineering LLC Don Hickerson (507) 281-0275 dhickerson@domailleengineering.comExcelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 etc1gl@frontiernet.netFastenal Manufacturing Tim Borkowski (507) 453-8000 tborkows@fastenal.comGranger Machine, Inc. Mike Parker (763) 444-3725 mike@grangermachine.comHaberman Machine, Inc. Scott Ness (651) 777-4511 scottn@habermanmachine.comHouck Machine Company Steve Kingdon (763) 566-3792 skingdon@houckmachine.comImaGineering Machine Inc. Jesse Schelitzche (952) 922-9311 js@imagineeringmachine.comInternational PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 dmeyer@ipminc.com

K & G Manufacturing Co. Bob Basiago (507) 334-5501 bbasiago@kgmfg.comKorin Electronics Repair & Assembly Tom Korin (612) 889-6435 tomkorin@gmail.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comLa Machine Shop, Inc. Joe LaBonne (763) 434-6108 joe@lamachineshop.comLake Engineering, Inc. Steve Magnuson (952) 473-5485 stevem@lakeengineering.comLakeland Tool & Engineering, Inc. Marty Sweerin (763) 422-8866 betty@lte.bizMack Engineering Corp. Jennifer Salisbury (612) 721-2471 jennifer.s@mackengineering.comMidland Technologies, Inc. Susan Dubay (763) 428-4229 midland@midlandtechnologies.comMidwest CAM Solutions, Inc. Richard Lord (763) 560-6567 rlord@midwestcamsolutions.com

MultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comNew Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 phuseby@nuprecisiontool.comNordic Components, Inc. Jarmo Kumpula (320) 234-6015 jarmo@nordiccomp.comNorthern Iron & Machine Ray Van Allen (651) 778-3374 rvanallen@northernim.comNorthland Screw Products, Inc. James Martinson (763) 753-3628 james@northlandscrewproducts.comNorthstar Aerospace Gary Corradi (218) 720-2920 gcorradi@northstaraerospace.comPequot Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 mgoerges@pequottool.comPrecise Products Corporation Darrell Freitag (612) 522-2141 dfreitag@preciseproducts.comProduction Tool &Manufacturing, Inc. Mark Boesch (763) 559-5746 markb@protoolus.com

QDP Technologies, Inc. Troy Holien (763) 712-1626 troy.holien@qdptech.comQuality Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 timg@qualitymachine.comRTI Remmele Medical Al Germscheid (763) 263-2636 al.germscheid@remmele.comSandvik Coromant John Depies (715) 410-1521 john.depies@sandvik.comSodick, Inc. Joel Manns (651) 319-7259 jmanns@sodick.comTaylor Machine, Inc. Rick Taylor (763) 786-5949 rtaylor@tmicnc.comTSI Plastics, Inc. Pat McCready (763) 784-0240 pat@tsiplastics.comTwin City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 slindell@twincityedm.comUMC, Inc. Nicole Ellos (763) 271-5200 nicolee@ultramc.com

©2016 Midwest CAM Solutions

QUALITY tooling and cutting fluids with SERVICE and technical support are in more than our name. They are what Q & S has built our reputation

on as an industrial distributor for 50 years.

Call 952.935.8616 or visit us at www.qandsmachinetool.com

Q&S Machine Tool Co.

18 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

MANUFACTURER

MILLING CONTIUEDVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.comYeager Machine, Inc. Mike Yeager (952) 467-2800 mike@yeagermachine.comZTECH Precision Don Zoubek (763) 635-0033 don@ztechprecision.com

MOLD MAKINGA-1 Engineering Todd Craft (763) 786-8710 todd.craft@a1eng.comBemis Healthcare Packaging, Inc. LeighAsleson (507) 625-1131 lcasleson@bemis.comCarley Foundry, Inc. Kevin Stensrud (763) 205-8933 kevin.stensrud@carleyfoundry.comCustom Mold & Design Bruce Cerepak (763) 535-2334 bcerepak@custommold.netDynamic Group Steve Kalina (763) 780-8674 skalina@dynamicgroup.com

Excelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 etc1gl@frontiernet.netMold-Tech, Inc. Jon Lee (763) 497-7500 jlee@mold-techinc.comMRG Tool and Die Corp. Mike Gramse (507) 334-1847 mgramse@mrgtoolanddie.comOmnitool, Inc. Walter Waffensmith (763) 535-4240 walter@omnitool.comPrecision Tool Technologies, Inc. Jim Goerges (218) 454-0434 jim@precisiontooltech.comTeamvantage Molding LLC Tom Caron (651) 464-3900 sales@teamvantage.comTooling Science, Inc. Bryce Kleven (763) 425-6001 bryce@tlscience.comVistaTek, LLC Allen Mishek (651) 653-0400 al@vistatek.com

NANOSCALE MANUFACTURINGTeamvantage Molding LLC Tom Caron (651) 464-3900 sales@teamvantage.com

PLASTIC INJECTION MOLDINGAlexandria Industries Tom Jensen (800) 568-6601 tjensen@alexandriaindustries.comDiamond Tool & Engineering, Inc. Kent Smith (218) 924-4024 ksmith@eot.comDynamic Group Steve Kalina (763) 780-8674 skalina@dynamicgroup.comLakeland Tool & Engineering, Inc. Marty Sweerin (763) 422-8866 betty@lte.bizMarr Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 chad@marrvalve.comPrecision Tool Technologies, Inc. Jim Goerges (218) 454-0434 jim@precisiontooltech.comrms Lee Zachman (763) 786-1520 lzachman@machine.comTeamvantage Molding LLC Tom Caron (651) 464-3900 sales@teamvantage.comTSI Plastics, Inc. Pat McCready (763) 784-0240 pat@tsiplastics.com

VistaTek, LLC Allen Mishek (651) 653-0400 al@vistatek.com

PLATING / COATINGSCo-Operative Plating Co. Rusty Ekness (651) 645-0787 rekness@coopplating.comCurtiss-Wright Mark Hockley (651) 780-3202 mark.hockley@cwst.comD & B Plating Company Vince Wheeler (763) 784-8038 vince@dugasbowers.comHard Chrome, Inc. Dick Walters (612) 788-9451 sales@hardchromeplating.netINCERTEC Rob Clark (763) 717-7016 rob.clark@incertec.comMicro Parts Inc. Robert Nichols (651) 452-1017 robert@mpi-dms.comPrecision Coatings, Inc. Linda Grundtner (651) 641-0878 sales@precisioncoatings.comTwin City Plating Company Ben Minger (612) 331-8895 ben@twincityplating.com

Ursa Major Dennis Stoffels (651) 462-4721 dennis@ursamajor.netWolkerstorfer Co., Inc. Kurt Weamer (651) 636-0720 kweamer.wci@gmail.com

POWDER COATINGCurtiss-Wright Mark Hockley (651) 780-3202 mark.hockley@cwst.comHuot Manufacturing Company John Huot (651) 646-1869 j.huot@huot.comPowder Coating Technologies, Inc. Kent Kienitz (763) 559-4779 kent@powdercoatingtech.com

PRECISION GRINDINGAce Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 kyle@acecuttergrinding.comAgrimson Tool Company, Inc. Gary Agrimson (763) 566-3446 mailroom@agrimsontool.comAndrew Tool & Machining Company Bruce Hanson (763) 559-0402 brucehanson@andrewtool.com

January | February 2016 PRECISION MANUFACTURING | 192016 BUYER'S GUIDE

MANUFACTURER

Castle Metals Dave Brown (763) 784-6866 drbrown@amcastle.comDatum-A-Industries, Inc. Eric Geyen (763) 479-1133 info@datum-manifolds.comFraisa USA, Inc. Mathieu Tapp (651) 636-8488 mtapp@fraisausa.comLaMott Enterprises, Inc. Steve LaMott (763) 781-0001 steve@lamottenterprises.comMinnesota Grinding, Inc. David Schranck (763) 535-4445 david.schranck@minnesotagrinding.comNorthwest Swiss-Matic, LLC Wade Halseth (763) 544-4222 whalseth@nwswissmatic.comPerfection Grinding, Inc. Jan Stern (763) 571-1052 perfgrin@aol.comPrecision Coatings, Inc. Linda Grundtner (651) 641-0878 sales@precisioncoatings.comProfessional InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 parneson@airbearings.com

Qualitek Engineering & Manufacturing Inc. Michael Nepsund (763) 544-9507 miken@qualitek-eng.comSilvertip Associates, Inc. Dale Peterson (763) 717-0773 silvertipassoc@aol.comTwin City Gear Company Max Fenna (763) 780-9780 tcgear@goldengate.netVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.com

PRODUCTION MACHININGAce Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 kyle@acecuttergrinding.comAitkin Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 jwc@aiw.comAlexandria Industries Tom Jensen (800) 568-6601 tjensen@alexandriaindustries.comAmeriStar Manufacturing Inc Alesha Sacco (507) 625-1515 fab@ameristarmfg.com

Andrew Tool & Machining Company Bruce Hanson (763) 559-0402 brucehanson@andrewtool.comAtscott ManufacturingCompany, Inc. John Norris (320) 629-2501 info@atscott.comBatten Tool & Machine, Inc. Dan Batten (952) 942-9198 dan@battentool.comBeaver Machine & Tool Inc. Jay Groth (763) 535-2204 beavshack@beavermachine.comBoring Machine Corporation Tom Chacon (763) 786-0100 tomchacon@bormac.comBowman Tool & Machining Angela Bowman (507) 286-1400 arb@btmcnc.comC-Axis Inc. Jeff Haley (763) 478-8982 jeff@c-axis.comCheetah Precision, Inc. Manfred Niedernhoefer (651) 633-4566 cheetah@cheetahprecision.comCinch Connectivity Solutions Jeff Norell (507) 833-6515 jeff.norell@emerson.com

CNH Machine Steve Swain (763) 572-0662 sswain@cnhmachine.comColumbia Gear Corp. Jim Hill (320) 356-7301 jhill@columbiagear.comContinental Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 eric@cem-web.comDigital Tool & Automation Dave Ackland (763) 421-0400 dackland@digital-tool.comDomaille Engineering LLC Don Hickerson (507) 281-0275 dhickerson@domailleengineering.comDotson Iron Castings Mark Maas (507) 345-5018 mmaas@dotson.comDuo-Tec Tool Company Dale Hanken (763) 425-5005 dhanken@duotectool.comEngineered Finishing Corp. Danforth Messerly (763) 785-9278 dmesserly@engfinish.comGandy Company Randy Vargason (507) 413-0933 rvargason@gandy.net

Graco Inc. Heather Bittle (612) 623-6431 hbittle@graco.comGranger Machine, Inc. Mike Parker (763) 444-3725 mike@grangermachine.comHaberman Machine, Inc. Scott Ness (651) 777-4511 scottn@habermanmachine.comHouck Machine Company Steve Kingdon (763) 566-3792 skingdon@houckmachine.comInternational PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 dmeyer@ipminc.comISC Companies, Inc. Lou Cowart (763) 559-0033 l.cowart@isccompanies.comJ&J Machine, Inc. John Lenz (763) 421-0114 sales@jandjmachine.comJIT Manufacturing, Inc. Gene Wehner (763) 425-7995 gwehner@jitmfgmn.comJonaco Machine LLC Bill Russell (952) 448-5544 sales@jonaco.com

5400 Douglas Dr. N, Crystal, MN 55429 // 888.332.8452 // 763.535.4445

20 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

MANUFACTURER

PRODUCTION MACHINING CONTINUEDK & G Manufacturing Co. Bob Basiago (507) 334-5501 bbasiago@kgmfg.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comLa Machine Shop, Inc. Joe LaBonne (763) 434-6108 joe@lamachineshop.comLaMott Enterprises, Inc. Steve LaMott (763) 781-0001 steve@lamottenterprises.comLou-Rich, Inc. Doug Olson (507) 377-5330 dolson@lou-rich.comMarr Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 chad@marrvalve.comMetal Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 trisha@metal-craft.comMICO, Inc. John (Sonny) Suserud (507) 386-4058 sonnys@mico.com

Midland Technologies, Inc. Susan Dubay (763) 428-4229 midland@midlandtechnologies.comMRG Tool and Die Corp. Mike Gramse (507) 334-1847 mgramse@mrgtoolanddie.comNETTwork Mfg. Inc. Aaron Netter (320) 654-8352 aaron@nettworkmfg.comNordic Components, Inc. Jarmo Kumpula (320) 234-6015 jarmo@nordiccomp.comNTM, Inc. Pat Mullins (763) 780-1420 patm@ntminc.comParker Hannifin Carsa Spaude (507) 233-2305 cspaude@parker.comPermac Industries Darlene Miller (952) 894-7231 dmiller@permacindustries.comPrecise Products Corporation Darrell Freitag (612) 522-2141 dfreitag@preciseproducts.comProduction Tool & Manufacturing, Inc. Mark Boesch (763) 559-5746 markb@protoolus.com

Roberts Automatic Products, Inc. Ted Roberts (952) 567-2868 troberts@robertsautomatic.comTEAM Industries Jim Russ (218) 694-3550 jimruss@team-ind.comTechnical Die-Casting, Inc. Randy Walters (800) 525-3168 randyw@tech-die-casting.comThe Specialty Manufacturing Company Ed Greene (651) 653-0599 egreene@specialtymfg.comUrsa Major Dennis Stoffels (651) 462-4721 dennis@ursamajor.netVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.comWinegar, Inc. Tim Wenzel (507) 835-3495 tim.wenzel@winegarinc.comWSI Industries, Inc. Benjamin Rashleger (763) 295-9202 brashleger@wsci.comWyoming Machine, Inc. Lori Tapani (651) 462-4156 ltapani@wyomingmachine.com

Yeager Machine, Inc. Mike Yeager (952) 467-2800 mike@yeagermachine.comZTECH Precision Don Zoubek (763) 635-0033 don@ztechprecision.com

PROTOTYPES / SHORT RUNAeroSystems Engineering David Myren (651) 220-1339 david.myren@aseholdings.comAitkin Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 jwc@aiw.comBatten Tool & Machine, Inc. Dan Batten (952) 942-9198 dan@battentool.comChallenge Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 carrieb@challengemachine.comColumbia Precision Machine Corp. Gilbert Baldwin (952) 890-1003 gbaldwin@columbiapmc.comCraft, Pattern & Mold Anthony Cremers (763) 675-3169 tony@craftpattern.com

D & B Plating Company Vince Wheeler (763) 784-8038 vince@dugasbowers.comDahlquist Machine Inc. Jeff Dahlquist (763) 755-7575 jdahlquist@dahlquistmachine.comEagle Tool & Design Co. Julie Ulrich (763) 784-7400 julrich@eagletoolinc.comISC Companies, Inc. Lou Cowart (763) 559-0033 l.cowart@isccompanies.comJ&J Machine, Inc. John Lenz (763) 421-0114 sales@jandjmachine.comJIT Manufacturing, Inc. Gene Wehner (763) 425-7995 gwehner@jitmfgmn.comJonaco Machine LLC Bill Russell (952) 448-5544 sales@jonaco.comMeier Tool & Engineering, Inc. Tom Murphy (763) 427-6275 tmurphy@meiertool.comMetal Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 trisha@metal-craft.com

www.csmp.com | 763-535-0501 | Precision Parts Since 1945

QUALITY… THAT’S HOW WE SPIN IT

Ross GreenwaldCass Employee

Since 2002

I MAKE PARTS FOR

POLARISSNOWMOBILES.DOES THAT MEANI CAN WRITE OFF MY SLED?

January | February 2016 PRECISION MANUFACTURING | 212016 BUYER'S GUIDE

MICO, Inc. John (Sonny) Suserud (507) 386-4058 sonnys@mico.comMicro-Matics Inc. Rick Paulson (763) 780-2700 rick@micro-matics.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comNew Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 phuseby@nuprecisiontool.comProfessional InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 parneson@airbearings.comSmith Foundry Company Jim Pint (612) 729-9395 pint_jim@smithfoundry.comVistaTek, LLC Allen Mishek (651) 653-0400 al@vistatek.comWestern Spring Manufacturing Alex Altstatt (651) 224-1721 alex@westernspring.com

PUNCHINGDMS Corporation Derek Nichols (651) 452-1017 derek@mpi-dms.comWilson Tool International Brian Robinson (651) 286-6000 brian.robinson@wilsontool.com

SAWINGCastle Metals Dave Brown (763) 784-6866 drbrown@amcastle.comLion Engineering Plastics, Inc. Scott King (952) 641-6300 sking@lionep.comMetal Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 dennyh@metal-services.comMidwest Steel Supply Company Brandon Walton (612) 333-6868 bw@midweststeelsupply.comPlastics International Paul Carter (952) 934-2303 paulc@plasticsintl.comQDP Technologies, Inc. Troy Holien (763) 712-1626 troy.holien@qdptech.comUS Pipe Fabrication Chris Muntz (763) 428-2259 cmuntz@usfabpipe.com

SCREW MACHININGAnderson Automatics, Inc. Doug Anderson (763) 533-2206 douga@andersonautomatics.com

Cass Screw Machine Products Company Steve Wise (763) 535-0501 steve@csmp.comCinch Connectivity Solutions Jeff Norell (507) 833-6515 jeff.norell@emerson.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comNorthland Screw Products, Inc. James Martinson (763) 753-3628 james@northlandscrewproducts.comNorthwest Swiss-Matic, LLC Wade Halseth (763) 544-4222 whalseth@nwswissmatic.comRoberts Automatic Products, Inc. Ted Roberts (952) 567-2868 troberts@robertsautomatic.comTwin City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 slindell@twincityedm.comWinegar, Inc. Tim Wenzel (507) 835-3495 tim.wenzel@winegarinc.com

SHEET & PLATE ROLLINGAgrimson Tool Company, Inc. Gary Agrimson (763) 566-3446 mailroom@agrimsontool.comMetal Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 dennyh@metal-services.com

SHEET METAL FABRICATIONAnderson Dahlen, Inc. David Knoll (763) 852-4700 KNOD@andersondahlen.comAtscott ManufacturingCompany, Inc. John Norris (320) 629-2501 info@atscott.comCorchran, Inc Tom Westphal (507) 833-0229 twestphal@corchran.comDayton Rogers of Minnesota, LLC John Madsen (763) 717-6340 jmadsen@daytonrogers.comFalls Fabricating LLC Mike Rott (320) 632-2322 mrott@fallsfab.comGandy Company Randy Vargason (507) 413-0933 rvargason@gandy.netH & F Manufacturing, Inc. Steve Farniok (763) 493-5606 stevef@hfmfg.com

Hibbing Fabricators, Inc. Sandy Bryant (218) 262-5575 sandy@hibfab.comHuot Manufacturing Company John Huot (651) 646-1869 j.huot@huot.comICA Corporation Steve Hoaglund (763) 428-2800 steveh@icacorp.comIFS-Industrial FabricationServices, Inc. Matt Doherty (507) 726-6000 mattifs@hickorytech.netJones Metal, Inc Toby Begnaud (507) 625-4436 tbegnaud@jonesmetalproducts.comMillerbernd Laser Farid Currimbhoy (320) 485-5458 fcurrimbhoy@millerberndlaser.comPequot Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 mgoerges@pequottool.comRadan - Vero Software Doug Wood (651) 982-0100 doug.wood@radan.comStates Manufacturing Corporation John Johnston (763) 588-0536 johnj@statesmfg.comTBEI / Crysteel Mfg Joe Paulsen (507) 726-2728 jpaulsen@tbei.comWilson Tool International Brian Robinson (651) 286-6000 brian.robinson@wilsontool.comWyoming Machine, Inc. Lori Tapani (651) 462-4156 ltapani@wyomingmachine.com

STAMPINGAmeriStar Manufacturing Inc Alesha Sacco (507) 625-1515 fab@ameristarmfg.comBranch Manufacturing Company, Inc. Tim Fairbanks (651) 674-4441 timf@branchmfg.comBTD Tooling Division Craig Rix (952) 469-2423 craig.rix@btdmfg.comDayton Rogers of Minnesota, LLC John Madsen (763) 717-6340 jmadsen@daytonrogers.comDMS Corporation Derek Nichols (651) 452-1017 derek@mpi-dms.comLake Air Metal Stamping LLC Brad Severson (763) 546-0994 bseverson@lakeairmetals.comMeier Tool & Engineering, Inc. Tom Murphy (763) 427-6275 tmurphy@meiertool.com

MRG Tool and Die Corp. Mike Gramse (507) 334-1847 mgramse@mrgtoolanddie.comThe Specialty Manufacturing Company Ed Greene (651) 653-0599 egreene@specialtymfg.comThomas Engineering Company Tim Aberwald (763) 533-1501 taberwald@thomasengineering.comTop Tool Company Duane Kari (763) 786-0030 dakari@toptool.comWestern Spring Manufacturing Alex Altstatt (651) 224-1721 alex@westernspring.comWilson Tool International Brian Robinson (651) 286-6000 brian.robinson@wilsontool.com

TOOL & DIEAutomated Randy Squier (763) 576-6946 rsquier@automatedextrusion.comBranch ManufacturingCompany, Inc. Tim Fairbanks (651) 674-4441 timf@branchmfg.comBTD Tooling Division Craig Rix (952) 469-2423 craig.rix@btdmfg.comDie Technology, Inc. Dale Skoog (763) 424-9677 dskoog@dietechnology.comDMS Corporation Derek Nichols (651) 452-1017 derek@mpi-dms.comDuo-Tec Tool Company Dale Hanken (763) 425-5005 dhanken@duotectool.comGraco Inc. Heather Bittle (612) 623-6431 hbittle@graco.comLake Air Metal Stamping LLC Brad Severson (763) 546-0994 bseverson@lakeairmetals.comMate Precision Tooling Joe Schneider (763) 421-0230 joe.schneider@mate.comNew Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 phuseby@nuprecisiontool.comOmnitool, Inc. Walter Waffensmith (763) 535-4240 walter@omnitool.comProfessional InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 parneson@airbearings.com

Qualitek Engineering &Manufacturing Inc. Michael Nepsund (763) 544-9507 miken@qualitek-eng.comTop Tool Company Duane Kari (763) 786-0030 dakari@toptool.com

TOOLING - PLASTIC EXTRUSIONAutomated Randy Squier (763) 576-6946 rsquier@automatedextrusion.com

TUBE BENDING & FABRICATIONMetal Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 dennyh@metal-services.com

TURNING401 Manufacturing Inc. Mike Anderson (763) 205-9040 401manufacturing@gmail.comAeroSystems Engineering David Myren (651) 220-1339 david.myren@aseholdings.comApplied Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 phenderson@appliedvacuum.comAPT CNC Inc. Brian Mayo (507) 931-5425 brianmayo@aptcnc.comBatten Tool & Machine, Inc. Dan Batten (952) 942-9198 dan@battentool.comBeaver Machine & Tool Inc. Jay Groth (763) 535-2204 beavshack@beavermachine.comBizal Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 bizalmfg@bizalmfg.comBoring Machine Corporation Tom Chacon (763) 786-0100 tomchacon@bormac.comBowman Tool & Machining Angela Bowman (507) 286-1400 arb@btmcnc.comBrenk Brothers, Inc. Jeff Brenk (763) 784-5621 jeff@brenkbrothers.comCass Screw Machine Products Company Steve Wise (763) 535-0501 steve@csmp.comC-Axis Inc. Jeff Haley (763) 478-8982 jeff@c-axis.comColumbia Gear Corp. Jim Hill (320) 356-7301 jhill@columbiagear.com

MANUFACTURER

22 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

TURNING CONTINUEDColumbia Precision Machine Corp. Gilbert Baldwin (952) 890-1003 gbaldwin@columbiapmc.comComet Tool, Inc. Jim Freitag (952) 935-3798 jim.freitag@comettoolinc.comCommand Tooling Systems LLC Bahti Hanedar (763) 576-6910 bhanedar@commandtool.comDahlquist Machine Inc. Jeff Dahlquist (763) 755-7575 jdahlquist@dahlquistmachine.comFastenal Manufacturing Tim Borkowski (507) 453-8000 tborkows@fastenal.comGranger Machine, Inc. Mike Parker (763) 444-3725 mike@grangermachine.comHaberman Machine, Inc. Scott Ness (651) 777-4511 scottn@habermanmachine.comICA Corporation Steve Hoaglund (763) 428-2800 steveh@icacorp.comImaGineering Machine Inc. Jesse Schelitzche (952) 922-9311 js@imagineeringmachine.comInternational PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 dmeyer@ipminc.comJIT Manufacturing, Inc. Gene Wehner (763) 425-7995 gwehner@jitmfgmn.comK & G Manufacturing Co. Bob Basiago (507) 334-5501 bbasiago@kgmfg.comKorin Electronics Repair & Assembly Tom Korin (612) 889-6435 tomkorin@gmail.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comLake Engineering, Inc. Steve Magnuson (952) 473-5485 stevem@lakeengineering.comMachining Technology Laurent Deconinck (763) 571-1771 ldeconinck@ machining-technology.comMack Engineering Corp. Jennifer Salisbury (612) 721-2471 jennifer.s@mackengineering.comMidland Technologies, Inc. Susan Dubay (763) 428-4229 midland@midlandtechnologies.com

MultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comNordic Components, Inc. Jarmo Kumpula (320) 234-6015 jarmo@nordiccomp.comNorthern Iron & Machine Ray Van Allen (651) 778-3374 rvanallen@northernim.comNorthstar Aerospace Gary Corradi (218) 720-2920 gcorradi@northstaraerospace.comPanther Precision Machine, Inc. Tom Olson (763) 586-9651 tolson@pantherprecision.comPequot Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 mgoerges@pequottool.comPrecise Products Corporation Darrell Freitag (612) 522-2141 dfreitag@preciseproducts.comProduction Tool &Manufacturing, Inc. Mark Boesch (763) 559-5746 markb@protoolus.comQDP Technologies, Inc. Troy Holien (763) 712-1626 troy.holien@qdptech.comRTI Remmele Medical Al Germscheid (763) 263-2636 al.germscheid@remmele.comSandvik Coromant John Depies (715) 410-1521 john.depies@sandvik.comTaylor Machine, Inc. Rick Taylor (763) 786-5949 rtaylor@tmicnc.comTSI Plastics, Inc. Pat McCready (763) 784-0240 pat@tsiplastics.comUMC, Inc. Nicole Ellos (763) 271-5200 nicolee@ultramc.comUrsa Major Dennis Stoffels (651) 462-4721 dennis@ursamajor.netUS Pipe Fabrication Chris Muntz (763) 428-2259 cmuntz@usfabpipe.comVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 brandon@vonruden.comWSI Industries, Inc. Benjamin Rashleger (763) 295-9202 brashleger@wsci.comYeager Machine, Inc. Mike Yeager (952) 467-2800 mike@yeagermachine.com

ZTECH Precision Don Zoubek (763) 635-0033 don@ztechprecision.com

TURNING - SWISSA-1 Engineering Todd Craft (763) 786-8710 todd.craft@a1eng.comAnderson Automatics, Inc. Doug Anderson (763) 533-2206 douga@andersonautomatics.comCheetah Precision, Inc. Manfred Niedernhoefer (651) 633-4566 cheetah@cheetahprecision.comCNH Machine Steve Swain (763) 572-0662 sswain@cnhmachine.comCommand Tooling Systems LLC Bahti Hanedar (763) 576-6910 bhanedar@commandtool.comCustom Mold & Design Bruce Cerepak (763) 535-2334 bcerepak@custommold.netHouck Machine Company Steve Kingdon (763) 566-3792 skingdon@houckmachine.comLa Machine Shop, Inc. Joe LaBonne (763) 434-6108 joe@lamachineshop.comLaMott Enterprises, Inc. Steve LaMott (763) 781-0001 steve@lamottenterprises.comMack Engineering Corp. Jennifer Salisbury (612) 721-2471 jennifer.s@mackengineering.comMarr Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 chad@marrvalve.comMicro-Matics Inc. Rick Paulson (763) 780-2700 rick@micro-matics.comMidwest CAM Solutions, Inc. Richard Lord (763) 560-6567 rlord@midwestcamsolutions.comMinnesota Grinding, Inc. David Schranck (763) 535-4445 david.schranck@ minnesotagrinding.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 ghadley@multisourcemfg.comNorthland Screw Products, Inc. James Martinson (763) 753-3628 james@northlandscrewproducts.comNorthwest Swiss-Matic, LLC Wade Halseth (763) 544-4222 whalseth@nwswissmatic.comPermac Industries Darlene Miller (952) 894-7231 dmiller@permacindustries.com

Production Tool & Manufacturing, Inc. Mark Boesch (763) 559-5746 markb@protoolus.comQuality Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 timg@qualitymachine.comrms Lee Zachman (763) 786-1520 lzachman@machine.comRoberts Automatic Products, Inc. Ted Roberts (952) 567-2868 troberts@robertsautomatic.comRTI Remmele Medical Al Germscheid (763) 263-2636 al.germscheid@remmele.comThe Specialty Manufacturing Company Ed Greene (651) 653-0599 egreene@specialtymfg.comUMC, Inc. Nicole Ellos (763) 271-5200 nicolee@ultramc.comWinegar, Inc. Tim Wenzel (507) 835-3495 tim.wenzel@winegarinc.com

WATER JET CUTTINGABA Water Systems, Inc. Tim Weaver (800) 257-1271 tim@abawatersystems.comAnderson Dahlen, Inc. David Knoll (763) 852-4700 KNOD@andersondahlen.comBizal Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 bizalmfg@bizalmfg.comJet Edge, Inc. Nancy Lauseng (763) 497-8700 sales@jetedge.comMinnesota Waterjet, Inc. Doug Leaser (763) 427-9200 dougl@mnwaterjet.com

WELDINGAnderson Dahlen, Inc. David Knoll (763) 852-4700 KNOD@andersondahlen.comApplied Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 phenderson@appliedvacuum.comCAB Construction Karla Hansen (507) 625-2233 karla@cabconstruction.comCorchran, Inc Tom Westphal (507) 833-0229 twestphal@corchran.comERMC Todd McChesney (763) 441-1581 sales@ermc.com

Falls Fabricating LLC Mike Rott (320) 632-2322 mrott@fallsfab.comGandy Company Randy Vargason (507) 413-0933 rvargason@gandy.netHutchinson Manufacturing, Inc. Tom Daggett (320) 587-4653 tdaggett@hutchmfg.comIFS-Industrial Fabrication Services, Inc. Matt Doherty (507) 726-6000 mattifs@hickorytech.netKato Engineering Russell Scheller (507) 625-4011 russell.scheller@emerson.comMetal Services of Blooming Prairie, Inc. Dennis Heimerman (507) 583-2144 dennyh@metal-services.comMINNCOR Industries Brenda Chandler (651) 361-7500 bchandler@minncor.comNorthstar Aerospace Gary Corradi (218) 720-2920 gcorradi@northstaraerospace.comPanther Precision Machine, Inc. Tom Olson (763) 586-9651 tolson@pantherprecision.comProduction Engineering Corp. Mike Albers (612) 788-9123 mhalbers@pecorp.netTBEI / Crysteel Mfg Joe Paulsen (507) 726-2728 jpaulsen@tbei.comUS Pipe Fabrication Chris Muntz (763) 428-2259 cmuntz@usfabpipe.com

WELDING - ROBOTICD/F Machine Specialties, Inc. Steve Moerke (507) 625-6200 sales@dfmachinespecialties.comDakota County Technical College Larry Lewis (651) 423-8276 larry.lewis@dctc.eduERMC Todd McChesney (763) 441-1581 sales@ermc.comH & F Manufacturing, Inc. Steve Farniok (763) 493-5606 stevef@hfmfg.comMillerbernd Laser Farid Currimbhoy (320) 485-5458 fcurrimbhoy@millerberndlaser.comPRI Robotics Scott Nelson (763) 450-4381 snelson@prirobotics.com

MANUFACTURER

January | February 2016 PRECISION MANUFACTURING | 232016 BUYER'S GUIDE

ABRASIVESAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 jaime.olsen@asimn.comBarry & Sewall Industrial Supply Steve Olson (612) 331-6170 steveo@barrysewall.comBlackHawk Industrial, St. Cloud Division Ken Voigt (320) 253-1020 ken.voigt@blackhawkid.comCentral McGowan, Inc. Brian Semroska (320) 252-5292 brians@centralmcgowan.comDeco Tool Supply Co. Kevin Corrigan (763) 537-7762 kcorrigan@decotool.comIndustrial Tool Solutions Brett Wharton (952) 432-2484 brett@itsmn.onmicrosoft.comQuality & Service Machine Tool Company Bill Lidfors (952) 935-8616 bill@qandsmachinetool.comReplenex, Inc. Tom Folska (952) 941-9150 tom.folska@replenex.comW.P. & R.S. Mars Company Bob Mars (952) 884-9388 rmars3@marssupply.com

AUTOMATION INTEGRATIONBaillie Sales & Engineering, Inc. Mark Baillie (952) 546-2960 mark@bailliesales.comCentral McGowan, Inc. Brian Semroska (320) 252-5292 brians@centralmcgowan.comDeco Tool Supply Co. Kevin Corrigan (763) 537-7762 kcorrigan@decotool.comDMG MORI Ellison Technologies Dale Mortier (763) 545-9699 dmortier@ellisontechnologies.comMaintecx Machine Tool LLC Rolf Biekert (612) 886-3386 biekertro@maintecx.comPower/mation Mark Felts (651) 605-3300 mark.felts@powermation.comPRI Robotics Scott Nelson (763) 450-4381 snelson@prirobotics.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comVer-tech Mark Wernimont (763) 559-2590 mwernimont@ver-tech.com

V-TEK, Inc. Christina James (507) 387-2039 c.james@vtekusa.com

CALIBRATION - TEST & INSPECTIONAlliance Metrology, Inc. Bryn Hartwig (763) 493-0026 brynhart@comcast.netBaillie Sales & Engineering, Inc. Mark Baillie (952) 546-2960 mark@bailliesales.comFox Valley Metrology Julie Moravec (715) 483-5334 julie.moravec@foxvalleymetrology.comJ. B. Testing, Inc. Jeff Boisvert (763) 795-9690 jbtesting@jbtesting.comLion Precision Don Martin (651) 484-6544 don@lionprecision.comPrecision Jamie Durand (763) 784-1704 jamie@precisionmn.comProductivity Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 keith.summers@pqi.netStone Machinery, Inc. Tom Drazkowski (651) 778-8887 info@stonemachinery.comUnited Standards Lab, Inc. James Dolezal (612) 823-2616 jim@unitedstandardslab.comV-TEK, Inc. Christina James (507) 387-2039 c.james@vtekusa.com

CLEANING SUPPLIESCastrol Industrial NA Jim Walker (612) 212-9783 james.walker8@bp.com

COOLANTS / LUBRICANTSAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 jaime.olsen@asimn.comCastrol Industrial NA Jim Walker (612) 212-9783 james.walker8@bp.comFluid Management Incorporated RogerNovitzki (612) 378-2580 roger@coolantrecycle.comLubrication Technologies, Inc. Luke Bame (651) 636-7990 lukebam@lubetech.comManufacturing Solutions of MN Inc. Jim Lemons (651) 294-7790 jim.lemons@msmni.com

Productivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comQuality & Service Machine Tool Company Bill Lidfors (952) 935-8616 bill@qandsmachinetool.comReplenex, Inc. Tom Folska (952) 941-9150 tom.folska@replenex.com

CUTTING TOOLSBlackHawk Industrial, St. Cloud Division Ken Voigt (320) 253-1020 ken.voigt@blackhawkid.comDavid Olson Sales Co., Inc. Clinton Olson (612) 722-9523 cmo@davidolsonsales.comDeco Tool Supply Co. Kevin Corrigan (763) 537-7762 kcorrigan@decotool.comHEXIS Andrew Skoog (612) 804-1143 andrew@hexpedite.comIndustrial Tool Solutions Brett Wharton (952) 432-2484 brett@itsmn.onmicrosoft.comMachine Tool Supply Corp. Troy Kerin (651) 452-4400 troyk@machtool.comManufacturing Solutions of MN Inc. Jim Lemons (651) 294-7790 jim.lemons@msmni.comMidwest Machine Tool Supply Doug Eliason (763) 571-3550 doug@midwestmachinetool.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comQuality & Service Machine Tool Company Bill Lidfors (952) 935-8616 bill@qandsmachinetool.comReplenex, Inc. Tom Folska (952) 941-9150 tom.folska@replenex.comSCT (Scientific Cutting Tools) Todd White (800) 383-2244 X 101 twhite@sct-usa.comSCHUNK, Inc. Matt Steele (800) 772-4865 matt.steele@us.schunk.comTechnology Reps Mike Neeley (651) 636-6966 mikeneeley@comcast.netThe Whittemore Co. Kurt Wasieleski (651) 331-8984 kurt@whittemore-inc.com

W.P. & R.S. Mars Company Bob Mars (952) 884-9388 rmars3@marssupply.com

GAUGINGAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 jaime.olsen@asimn.comDavid Olson Sales Co., Inc. Clinton Olson (612) 722-9523 cmo@davidolsonsales.comLion Precision Don Martin (651) 484-6544 don@lionprecision.comPrecision Jamie Durand (763) 784-1704 jamie@precisionmn.comProductivity Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 keith.summers@pqi.netProtoTek Engineering, Inc. Brian Pascoe (952) 361-5598 bpascoe@prototek-engineering.comT. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 terryb@tbryce.com

HYDRAULIC / PNEUMATICSAir Engineering & Supply, Inc. David Maurer (612) 332-4181 david@airengr.comKaeser Compressors, Inc. Matt McCorkle (855) 523-7373 matt.mccorkle@kaeser.comMidwest Machine Tool Supply Doug Eliason (763) 571-3550 doug@midwestmachinetool.comTechnology Reps Mike Neeley (651) 636-6966 mikeneeley@comcast.net

LUBRICATION EQUIPMENT & SYSTEMSLubrication Technologies, Inc. Luke Bame (651) 636-7990 lukebam@lubetech.com

MACHINE & ELECTRICAL REPAIRAgility Machine Tool, Inc. Brian Holcomb (763) 792-8502 brian@agilitymachine.comConcept Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 sales@conceptmachine.comDMG MORI Ellison Technologies Dale Mortier (763) 545-9699 dmortier@ellisontechnologies.com

Morris Midwest Craig Hahne (763) 424-5622 chahne@morrismidwest.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.com

MACHINE TOOL SALES CHIP CUTTINGAgility Machine Tool, Inc. Brian Holcomb (763) 792-8502 brian@agilitymachine.comAll Tech Machinery & Supply Tom Sobetski (612) 423-4663 tsobetski@alltechmachinery.comConcept Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 sales@conceptmachine.comDavid Olson Sales Co., Inc. Clinton Olson (612) 722-9523 cmo@davidolsonsales.comDMG MORI Ellison Technologies Dale Mortier (763) 545-9699 dmortier@ellisontechnologies.comErickson Machine Tools Kurt Erickson (515) 733-4361 kurt@ericksonmachine.comHales Machine Tool, Inc. Dan Hales (763) 553-1711 dhales@halesmachinetool.comHoff Online Auctions Dennis Hoff (612) 521-5500 dennis.hoff@hoffonlineauctions.comMachine Tool Supply Corp. Troy Kerin (651) 452-4400 troyk@machtool.comMaintecx Machine Tool LLC Rolf Biekert (612) 886-3386 biekertro@maintecx.comMatsuura Machinery USA Craig St. John (651) 289-9700 Craig.StJohn@matsuurausa.comMorris Midwest Craig Hahne (763) 424-5622 chahne@morrismidwest.comNanotech Machinery Solutions, Inc. Kevin Manion (763) 425-6266 kevin@nanomach.usNorthwest Machine Tony Bailey (763) 493-3660 tbailey@nwmtec.comOrca Machine Tools, Inc. Theron Horn (763) 494-9825 thorn@orca-inc.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.com

DISTRIBUTOR

24 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

DISTRIBUTOR

MACHINE TOOL SALES CHIP CUTTING CONTINUEDStone Machinery, Inc. Tom Drazkowski (651) 778-8887 info@stonemachinery.comT. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 terryb@tbryce.comUsed Machinery Sales LLC Jack Mendenhall (763) 441-5152 jack@cnctool.com

MACHINE TOOL SALES FABRICATIONErickson Machine Tools Kurt Erickson (515) 733-4361 kurt@ericksonmachine.comHoff Online Auctions Dennis Hoff (612) 521-5500 dennis.hoff@hoffonlineauctions.comKLC Financial, Inc. Spencer Thomas (952) 224-4300 spencer@klcfinancial.comMaintecx Machine Tool LLC Rolf Biekert (612) 886-3386 biekertro@maintecx.comOrca Machine Tools, Inc. Theron Horn (763) 494-9825 thorn@orca-inc.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.com

MACHINE TOOL SALES (USED)Agility Machine Tool, Inc. Brian Holcomb (763) 792-8502 brian@agilitymachine.comAll Tech Machinery & Supply Tom Sobetski (612) 423-4663 tsobetski@alltechmachinery.comCities Advanced Machinery Harry Youtsos (952) 944-6060 harry@cam-cnc.comHales Machine Tool, Inc. Dan Hales (763) 553-1711 dhales@halesmachinetool.comHoff Online Auctions Dennis Hoff (612) 521-5500 dennis.hoff@hoffonlineauctions.comNanotech Machinery Solutions, Inc. Kevin Manion (763) 425-6266 kevin@nanomach.usNorthwest Machine Tony Bailey (763) 493-3660 tbailey@nwmtec.com

Orca Machine Tools, Inc. Theron Horn (763) 494-9825 thorn@orca-inc.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comT. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 terryb@tbryce.com

METAL SERVICE CENTERCastle Metals Dave Brown (763) 784-6866 drbrown@amcastle.comErickson Metals of MN, Inc. Luke Harned (763) 785-2340 lharned@ericksonmetalsmn.comM. Vincent & Associates, Ltd. David Hannah (952) 884-7733 dhannah@vincentmetals.comMidwest Steel Supply Company Brandon Walton (612) 333-6868 bw@midweststeelsupply.comOlympic Steel, Inc. Tom Ehlers (763) 544-7100 tehlers@olysteel.comQuality Metals, Inc. Jason King (651) 545-2877 jason.king@qualitymetalsinc.com

METROLOGYAlliance Metrology, Inc. Bryn Hartwig (763) 493-0026 brynhart@comcast.netConcept Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 sales@conceptmachine.comFox Valley Metrology Julie Moravec (715) 483-5334 julie.moravec@foxvalleymetrology.comJ. B. Testing, Inc. Jeff Boisvert (763) 795-9690 jbtesting@jbtesting.comLion Precision Don Martin (651) 484-6544 don@lionprecision.comMartin Calibration Inc. Rick Brion (952) 882-1528 rbrion@martincalibration.comPrecision Jamie Durand (763) 784-1704 jamie@precisionmn.comProductivity Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 keith.summers@pqi.netProtoTek Engineering, Inc. Brian Pascoe (952) 361-5598 bpascoe@prototek-engineering.com

United Standards Lab, Inc. James Dolezal (612) 823-2616 jim@unitedstandardslab.com

PACKAGINGBemis Healthcare Packaging, Inc. Leigh Asleson (507) 625-1131 lcasleson@bemis.comPallet Recycling Div. Drew Engleman (651) 488-0474 Drew.Engleman@opmpallet.comV-TEK, Inc. Christina James (507) 387-2039 c.james@vtekusa.com

PLASTIC SHEET ROD & TUBELion Engineering Plastics, Inc. Scott King (952) 641-6300 sking@lionep.comPlastics International Paul Carter (952) 934-2303 paulc@plasticsintl.comPrecision Punch & Plastic, Co. Inc. Kevin Ryan (952) 933-0993 kevinr@precisionpunch.com

ROBOTICS / AUTOMATIONAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 laurau@alextech.eduAll Tech Machinery & Supply Tom Sobetski (612) 423-4663 tsobetski@alltechmachinery.comBaillie Sales & Engineering, Inc. Mark Baillie (952) 546-2960 mark@bailliesales.comCentral McGowan, Inc. Brian Semroska (320) 252-5292 brians@centralmcgowan.comHales Machine Tool, Inc. Dan Hales (763) 553-1711 dhales@halesmachinetool.comNorthwest Machine Tony Bailey (763) 493-3660 tbailey@nwmtec.comPower/mation Mark Felts (651) 605-3300 mark.felts@powermation.comPRI Robotics Scott Nelson (763) 450-4381 snelson@prirobotics.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comSCHUNK, Inc. Matt Steele (800) 772-4865 matt.steele@us.schunk.com

SAFETY EQUIPMENTAir Engineering & Supply, Inc. David Maurer (612) 332-4181 david@airengr.comBlackHawk Industrial, St. Cloud Division Ken Voigt (320) 253-1020 ken.voigt@blackhawkid.comPower/mation Mark Felts (651) 605-3300 mark.felts@powermation.comVer-tech Mark Wernimont (763) 559-2590 mwernimont@ver-tech.comW.P. & R.S. Mars Company Bob Mars (952) 884-9388 rmars3@marssupply.com

SUPPLY SALESHEXIS Andrew Skoog (612) 804-1143 andrew@hexpedite.comIndustrial Tool Solutions Brett Wharton (952) 432-2484 brett@itsmn.onmicrosoft.comMachine Tool Supply Corp. Troy Kerin (651) 452-4400 troyk@machtool.comNanotech Machinery Solutions, Inc. Kevin Manion (763) 425-6266 kevin@nanomach.usSCT (Scientific Cutting Tools) Todd White (800) 383-2244 X 101 twhite@sct-usa.comVer-tech Mark Wernimont (763) 559-2590 mwernimont@ver-tech.com

TOOL REPAIR / SERVICINGErickson Machine Tools Kurt Erickson (515) 733-4361 kurt@ericksonmachine.comFox Valley Metrology Julie Moravec (715) 483-5334 julie.moravec@foxvalleymetrology.comFraisa USA, Inc. Mathieu Tapp (651) 636-8488 mtapp@fraisausa.comKorin Electronics Repair & Assembly Tom Korin (612) 889-6435 tomkorin@gmail.comMaintecx Machine Tool LLC Rolf Biekert (612) 886-3386 biekertro@maintecx.comMatsuura Machinery USA Craig St. John (651) 289-9700 Craig.StJohn@matsuurausa.com

NTM, Inc. Pat Mullins (763) 780-1420 patm@ntminc.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.com

WORKHOLDINGHEXIS Andrew Skoog (612) 804-1143 andrew@hexpedite.comKurt Manufacturing Company Inc. Steve Carlsen (763) 572-1500 stevec@kurt.comManufacturing Solutions of MN Inc. Jim Lemons (651) 294-7790 jim.lemons@msmni.comMidwest Machine Tool Supply Doug Eliason (763) 571-3550 doug@midwestmachinetool.comProductivity Inc Greg Buck (763) 476-8600 gbuck@productivity.comSCHUNK, Inc. Matt Steele (800) 772-4865 matt.steele@us.schunk.comStone Machinery, Inc. Tom Drazkowski (651) 778-8887 info@stonemachinery.comThe Whittemore Co. Kurt Wasieleski (651) 331-8984 kurt@whittemore-inc.com

January | February 2016 PRECISION MANUFACTURING | 252016 BUYER'S GUIDE

ACCOUNTINGBallenthin, Funk & Johnson, LLP Josh Funk jfunk@bfjcpa.comBDO USA, LLP Steve Stoup (952) 854-5700 sstoup@bdo.comBlanski Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 gturnquist@bpkz.comCarlson Advisors, LLP Melvin Enger (763) 535-8150 menger@carlson-advisors.comCBIZ MHM, LLC Eric Hawkinson (612) 376-1264 ehawkinson@cbiz.comDS & B Certified Public Accountants, Consultants & Advisors Clint Seehusen (612) 359-9630 cseehusen@dsb-cpa.comFroehling Anderson Gary Dosdall (952) 979-3100 gdosdall@fa-cpa.comFroehling Anderson Chad Marquardt (952) 303-4099 chad@hamiltonandmonroe.comRedpath and Company Gloria McDonnell (651) 426-7000 gmcdonnell@redpathcpas.comSolution Dynamics, Inc. Russ Bengtson (952) 854-1415 russb@solutiondynamics.net

BANKING / FINANCINGAlerus Financial Lisa Moncrief (952) 417-3768 lisa.moncrief@alerus.comAssociated Bank-Eagan* Wendy Carney (651) 306-1625 wendy.carney@associatedbank.comBankCherokee Roger Hamilton (651) 291-6263 rhamilton@bankcherokee.comBell State Bank and Trust Marc Flanders (952) 905-5043 mflanders@bellbanks.comCentral Bank Matt Heger (763) 422-4520 mheger@centralbnk.comCorTrust Bank Tim Swanson (651) 289-5000 tswanson@cortrustbank.comHamilton & Monroe, LLC Chad Marquardt (952) 303-4099 chad@hamiltonandmonroe.comKayHarris Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 kay@kayharrisre.com

KLC Financial, Inc. Spencer Thomas (952) 224-4300 spencer@klcfinancial.comLarkin Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 mgeier@larkinhoffman.comMinnwest Bank Karl Neset (952) 230-9820 karln@minnwestbankgroup.comQuazar Capital Corporation Bruce Behm (763) 550-9000 bruceb@quazarcapital.comSaint Paul Port Authority B. Kyle (651) 224-5686 blk@sppa.comVenture Bank Kriss Griebenow (763) 398-3333 kgriebenow@venturebankonline.comWestern Bank, National Association Jeffry Wosje (952) 857-4069 jwosje@western-bank.com

CAPITAL EQUIPMENT FINANCINGAlerus Financial Lisa Moncrief (952) 417-3768 lisa.moncrief@alerus.comBankCherokee Roger Hamilton (651) 291-6263 rhamilton@bankcherokee.comBell State Bank and Trust Marc Flanders (952) 905-5043 mflanders@bellbanks.comKLC Financial, Inc. Spencer Thomas (952) 224-4300 spencer@klcfinancial.comMinnwest Bank Karl Neset (952) 230-9820 karln@minnwestbankgroup.com

COMPUTER SOFTWARE & TRAININGa COUPLE of GURUS Keith Schoolcraft (612) 454-4878 keith@acoupleofgurus.comAlliance Metrology, Inc. Bryn Hartwig (763) 493-0026 brynhart@comcast.netAnoka Technical College Nick Graff (763) 576-4700 ngraff@anokatech.eduBlanski Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 gturnquist@bpkz.comEpicor Software Corporation Christine Hansen (952) 417-5161 chansen@epicor.com

Exact JobBOSS Michael Stadelman (800) 777-4334 mike.stadelman@exact.comMidwest CAM Solutions, Inc. Richard Lord (763) 560-6567 rlord@midwestcamsolutions.comNetwork Medics, Inc. Kevin Calgren (612) 315-7100 kevin@networkmedics.comNTI School of Technology/Globe University Lee Petersen (651) 730-5100 lpetersen@globeuniversity.eduProtoTek Engineering, Inc. Brian Pascoe (952) 361-5598 bpascoe@prototek-engineering.comRadan - Vero Software Doug Wood (651) 982-0100 doug.wood@radan.comRiverland Community College-Austin Peggy Young (507) 433-0602 peggy.young@riverland.eduSolution Dynamics, Inc. Russ Bengtson (952) 854-1415 russb@solutiondynamics.netSYNCHRONO Pam Bednar (651) 228-1772 pbednar@synchrono.com

CONSTRUCTIONConstruction Results Corporation Mark Snyder (763) 559-1100 mark.snyder@constructionresults.com

ECONOMIC DEVELOPMENTAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 laurau@alextech.eduEnterprise Minnesota, Inc. John Connelly (612) 373-2900 john.connelly@ enterpriseminnesota.orgKayHarris Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 kay@kayharrisre.comMHTA-Minnesota High Tech Association Andrew Wittenborg (952) 230-4555 awittenborg@mhta.orgRiverland Community College-Austin Peggy Young (507) 433-0602 peggy.young@riverland.eduSaint Paul Port Authority B. Kyle (651) 224-5686 blk@sppa.com

EMPLOYEE BENEFITSCBIZ MHM, LLC Eric Hawkinson (612) 376-1264 ehawkinson@cbiz.comChristensen Group Bob Schmitz (952) 653-1051 rschmitz@christensengroup.comLarkin Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 mgeier@larkinhoffman.com

ENGINEERING & DESIGN SERVICESAir Engineering & Supply, Inc. David Maurer (612) 332-4181 david@airengr.comBemis Healthcare Packaging, Inc. Leigh Asleson (507) 625-1131 lcasleson@bemis.comCRTechnical Tom Wolden (763) 560-6015 tomwolden@crtechnical.comDomaille Engineering LLC Don Hickerson (507) 281-0275 dhickerson@domailleengineering.comEagle Tool & Design Co. Julie Ulrich (763) 784-7400 julrich@eagletoolinc.comHamre Designs LLC Paul Hamre (651) 261-4673 paul@hamredesigns.comIFS-Industrial Fabrication Services, Inc. Matt Doherty (507) 726-6000 mattifs@hickorytech.netKato Engineering Russell Scheller (507) 625-4011 russell.scheller@emerson.comMeier Tool & Engineering, Inc. Tom Murphy (763) 427-6275 tmurphy@meiertool.comTechnical Die-Casting, Inc. Randy Walters (800) 525-3168 randyw@tech-die-casting.comThe Whittemore Co. Kurt Wasieleski (651) 331-8984 kurt@whittemore-inc.com

INSURANCEChristensen Group Bob Schmitz (952) 653-1051 rschmitz@christensengroup.comFederated Insurance Jeff Stevenson (507) 455-5200 jsstevenson@fedins.com

ISO CERTIFICATION SERVICESEnterprise Minnesota, Inc. John Connelly (612) 373-2900 john.connelly@enterpriseminnesota.orgNQA-National Quality Assurance, USA Terri Sena (978) 635-9256 Terri.sena@nqa-usa.com

LEGALDMK Intellectual Property Law PLLC Deirdre Kvale (952) 595-5617 dkvale@dmkiplaw.comHamilton & Monroe, LLC Chad Marquardt (952) 303-4099 chad@hamiltonandmonroe.comLarkin Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 mgeier@larkinhoffman.comLindquist + Vennum LLP Mark Privratsky (612) 371-2461 mprivratsky@lindquist.com

MERGERS & ACQUISITIONSBDO USA, LLP Steve Stoup (952) 854-5700 sstoup@bdo.comBlanski Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 gturnquist@bpkz.comCarlson Advisors, LLP Melvin Enger (763) 535-8150 menger@carlson-advisors.comCBIZ MHM, LLC Eric Hawkinson (612) 376-1264 ehawkinson@cbiz.comDS & B Certified Public Accountants,Consultants & Advisors Clint Seehusen (612) 359-9630 cseehusen@dsb-cpa.comFroehling Anderson Gary Dosdall (952) 979-3100 gdosdall@fa-cpa.comLarkin Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 mgeier@larkinhoffman.comQuazar Capital Corporation Bruce Behm (763) 550-9000 bruceb@quazarcapital.com

PROFESSIONAL SERVICES

26 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

PROFESSIONAL SERVICES

PROGRAMMINGAnoka Technical College Nick Graff (763) 576-4700 ngraff@anokatech.eduMHTA-Minnesota High Tech Association Andrew Wittenborg (952) 230-4555 awittenborg@mhta.orgSolution Dynamics, Inc. Russ Bengtson (952) 854-1415 russb@solutiondynamics.net

R&D TAX CREDIT CONSULTANTSBDO USA, LLP Steve Stoup (952) 854-5700 sstoup@bdo.comBlack Line Group Scott Schmidt (763) 550-0111 scott@blacklinegrp.comCarlson Advisors, LLP Melvin Enger (763) 535-8150 menger@carlson-advisors.comDS & B Certified Public Accountants,Consultants & Advisors Clint Seehusen (612) 359-9630 cseehusen@dsb-cpa.comFroehling Anderson Gary Dosdall (952) 979-3100 gdosdall@fa-cpa.com

Redpath and Company Gloria McDonnell (651) 426-7000 gmcdonnell@redpathcpas.com

REAL ESTATEAssociated Bank-Eagan* Wendy Carney (651) 306-1625 wendy.carney@associatedbank.comBell State Bank and Trust Marc Flanders (952) 905-5043 mflanders@bellbanks.comKayHarris Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 kay@kayharrisre.comLarkin Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 mgeier@larkinhoffman.comSaint Paul Port Authority B. Kyle (651) 224-5686 blk@sppa.com

RECYCLINGFluid Management Incorporated Roger Novitzki (612) 378-2580 roger@coolantrecycle.comIndustrial Waste Services, Inc. Mike Antolik (952) 474-2628 mike@industrialwasteservices.biz

Lubrication Technologies, Inc. Luke Bame (651) 636-7990 lukebam@lubetech.comPallet Recycling Div. Drew Engleman (651) 488-0474 Drew.Engleman@opmpallet.com

RETIREMENT SERVICESChristensen Group Bob Schmitz (952) 653-1051 rschmitz@christensengroup.com

SHIPPING & DELIVERYOn Time Delivery Service, Inc. Tim Holtan (952) 884-4060 tholtan@bontime.com

STAFFINGCRTechnical Tom Wolden (763) 560-6015 tomwolden@crtechnical.comEmergeWorks Karla Swanson (612) 876-5868 swansonk@emerge-mn.orgVolt Workforce Solutions Chad Dohlen (651) 633-3889 cdohlen@volt.com

TECHNICAL COLLEGES / EDUCATIONAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 laurau@alextech.eduAnoka Technical College Nick Graff (763) 576-4700 ngraff@anokatech.eduAnoka-Ramsey Community College Jon Olson (763) 433-1201 jon.olson@anokaramsey.eduBemidji State University Dr. James Bensen (218) 755-2950 mbensen@bemidjistate.eduCentral Lakes College-Staples Christopher Hadfield (218) 894-5172 chadfield@clcmn.eduDakota County Technical College Larry Lewis (651) 423-8276 larry.lewis@dctc.eduDunwoody College of Technology E. J. Daigle (612) 374-5800 edaigle@dunwoody.eduHennepin Technical College Marguerite Dummer (763) 488-2731 marguerite.dummer@ hennepintech.eduLake Superior College Max Udovich (218) 733-7631 m.udovich@lsc.eduMinneapolis Community & Tech. College Kim Munson (612) 659-6093 kim.munson@minneapolis.eduMN State College, Southeast Technical Roger Holland (507) 453-2700 rholland@southeastmn.eduNTI School of Technology/Globe University Lee Petersen (651) 730-5100 lpetersen@globeuniversity.eduPine Technical College Julie Dillenburg (320) 629-5112 dillenburgj@pine.eduRidgewater College Dale Bomstad (320) 234-8568 dale.bomstad@ridgewater.eduRiverland Community College-Austin Peggy Young (507) 433-0602 peggy.young@riverland.eduSouth Central College Tom Kammer (507) 389-7336 tom.kammer@southcentral.eduSt. Cloud Tech & Comm College Bruce Peterson (320) 308-5000 bpeterson@sctcc.edu

St. Paul College-A Comm. & Tech. College Cheryl Beaumier (651) 846-1600 cheryl.beaumier@saintpaul.eduUniversity of St Thomas Bob Bach (651) 962-5510 rjbach@stthomas.edu360º Mfg & Applied Engineering,ATE Regional Ctr of Excellence Karen White (218) 755-2208 kwhite@bemidjistate.edu

WEALTH MANAGEMENTAlerus Financial Lisa Moncrief (952) 417-3768 lisa.moncrief@alerus.comBankCherokee Roger Hamilton (651) 291-6263 rhamilton@bankcherokee.com

Federated Mutual Insurance Company Federated Service Insurance Company* Federated Life Insurance CompanyOwatonna, Minnesota 55060 Phone: 507.455.5200www.federatedinsurance.com

*Not licensed in the states of NH, NJ, and VT.© 2015 Federated Mutual Insurance Company

www.federatedinsurance.com

Call our Association

Partner!