Post on 19-Aug-2018
Electrical Machines
email sales@hft-education.com
TELEPHONE +44 (0) 845 5199 280 / 290
FAX +44 (0) 845 5199 260
www.hft-education.com
Electrical Machines, including motors, generators and transformers, are used widely in industrial, commercialand domestic applications and consume an estimated 60% of global electricity supply.
Understanding the design, operation, control and maintenance of these machines is therefore a core part of an Engineer or service technician’s training.
The HFT Education Electrical Machines range has been designed for studying the most commonly used electrical machines, their applications and combined operation, in a safe educational environment.
The range includes single-phase and three-phase AC machines, DC machines, brushless motors, permanent magnet machines, servo drives, transformers, motor and transformer winding equipment and the power supplies, loads and instrumentation required for comprehensive experimentation.
Each electrical machine has a male and female coupling, allowing multiple machine shafts to be connected for more advanced experimentation.
The machines are rated at 300-500W and are real industrial machines, that give scalable, repeatable results that represent real applications. HFT Education can supply both 100-200W and 1kW Electrical Machines on request.
Key features and benefits of the Electrical Machines range include:
• Fully modular system with open physical and electrical connections allows experimental circuits to be built from scratch.• Fractional horsepower machines gives scalable, repeatable results from safe laboratory scale equipment.• Large selection of braking devices including Dynamometers, power brakes and flywheels for different experimental setups.• Analogue, digital, manual and fully automatic instrumentation and power supply options.
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
OVERVIEW
Elec
tric
al M
ac
hin
es
OVERVIEW
subjects
career paths
industryapplications
• AC Motors and Generators
• AC Motor Speed Control
• Asynchronous Machines
• Autotransformers
• Brushless Motors
• Cage Motors
• Control of AC and DC Machines
• Coupling DC Shunt and DC
Compound Motors
• DC Motors And Generators
• DC Motor Speed Control
• DC Compound Motors
• DC Series Machines
• DC Shunt Machines
• Drives and Motor Control
• Eddy Current Brakes
• Induction Motors
• Inverter Drives
• Lead-Lag Operation
• Motor and Transformer Winding
• Motor Assembly and Construction
• Motor Starting
• Neutral Plane
• Paralleling Two Alternators
• Pid Motor Control
• Pwm Drives
• Repulsion Motors
• Resistive, Inductive and Capacitive Loads
• Single and 3-Phase Motors
and Generators
• Single and 3-Phase Transformers
• Slip-Ring Motors
• Star/Delta Transformer Connections
• Asynchronous Motor Starting
• AC and DC Machine Speed Control
• Synchronous Compensators
• Synchronous Machines
• T(Scott) Connections
• Transformer Assembly and Construction
• Vector Drives
• Warn Leonard System
• Installation Engineer
• Field Service Engineers
• Systems Technician
• Design Engineer
• Research Engineer
• Production Engineer
• Transportation: Road, Rail,
• Automotive, Aviation, Personal
• Power Generation
• Military Applications
• Fitness Machinery
• Steel Mills, Textile and Paper Mills
• Mining and Quarrying
• Power Tools
• Household Appliances
• Music Players and Recorders
• Blowers and Fans
• Industrial machinery
• Pumps, Compressors and Fans
• Servos
• Computer Equipment, Printers,
• Scanners and Fax Machines
• Clocks and Watches
• Cranes and Lifting Equipment
• Oil and Gas Drilling Rigs
3
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
index
Elec
tric
al M
ac
hin
es
index
4
INDEX 300W - 500W machinesEME200 DC Compound Machine .............................................................................................................................7
EME200A DC Motor Thyristor Drive ............................................................................................................................
EME201 DC Series and Compound Machine ..........................................................................................................
EME202 DC Series Machine ...........................................................................................................................................
EME203 3-Phase Synchronous Machine ..................................................................................................................
EME204 3-Phase Cage Rotor Induction Motor ...................................................................................................8
EME204A 3-Phase Inverter Drive ...................................................................................................................................
EME204HV High Voltage 3-Phase Squirrel Cage Induction motor .....................................................................
EME205 3-Phase Wound Rotor Induction Motor .................................................................................................
EME208 Single-Phase Motor with Running Capacitor ........................................................................................
EME209 Single-Phase Capacitor Start and Run Motor with Centrifugal Breaker ................................9
EME210 Single-Phase Repulsion Start Induction Motor ....................................................................................
EME211 Universal AC/DC Motor ................................................................................................................................
EME217 Brushless Motor with Servo Drive ............................................................................................................
EME218 Reluctance Motor.............................................................................................................................................
TransformersEME220 Single-Phase Transformer ....................................................................................................................... 10
EME221 3-Phase Transformer ......................................................................................................................................
EME222 Starting Autotransformer for 3-Phase Motors ....................................................................................
Brakes, Dynamometers and TachogeneratorsEME230 DC Dynamometer ...................................................................................................................................... 11
EME231 Eddy Current Brake .........................................................................................................................................
EME231A Power Supply for Eddy Current Brake .....................................................................................................
EME232 Tachogenerator .................................................................................................................................................
EME233 Electromagnetic Powder Brake ..................................................................................................................
InstrumentationEME260 Computerised Measurement System ................................................................................................ 12
EME262 Analogue and Digital Instrumentation ....................................................................................................
EME263 Bench-Top Modular Frame ...........................................................................................................................
EME264 Digital Measurement System ......................................................................................................................
EME265 Digital Torque Meter ................................................................................................................................. 13
EME266 Digital Torque, Speed and Mechanical Power Meter .........................................................................
EME267 Electronic Digital Revolution Counter .....................................................................................................
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
index
Elec
tric
al M
ac
hin
es
index
5
INDEX RheostatsEME270 Generator Shunt Field Rheostat .......................................................................................................... 14
EME271 Motor Shunt Field Rheostat .........................................................................................................................
EME272 Series Field Rheostat ......................................................................................................................................
EME273 3-Phase Rotor Starting Rheostat ...............................................................................................................
EME274 Starting Rheostat for Wound Rotor Induction Motor .......................................................................
loadsEME280 Variable Resistive Load ............................................................................................................................ 15
EME281 Variable Inductive Load .................................................................................................................................
EME282 Variable Capacitive Load ...............................................................................................................................
EME285 Mechanical Flywheel Load............................................................................................................................
power suppliesEME291 Programmable AC/DC Power Supply ................................................................................................ 16
EME292 Variable Power Supply ...................................................................................................................................
EME293 Variable Power Supply with Low Voltage Section ...............................................................................
EME950 Bench-Top Variable Single and 3-Phase AC and DC Power Supply ............................................................
AC and DC Motor DrivesEME310 Stepper Motor and Bipolar Chopper Drive ..................................................................................... 17
EME311 DC Shunt Motor and Thyristor Drive .......................................................................................................
EME312 Permanent Magnet DC Motor and 4 Quadrant PWM Drive..........................................................
EME313 3-Phase Asynchronous Motor and Variable Frequency Drive ......................................................
EME314 3-Phase Brushless Motor and Bi-directional Drive ............................................................................
EME315 3-Phase Asynchronous Motor and Vector Drive........................................................................... 18
EME316 Linear Motor Trainer .......................................................................................................................................
EME10 Combined DC Motor Drive Trainer ..........................................................................................................
EME11 Combined AC Motor Drive Trainer ...........................................................................................................
Industrial Motor ControlEME50 Electrical Machines Control and Fault Finding .............................................................................. 19
EME360 Motor Control with Contactors and Switches .....................................................................................
EME361 Motor Control with Contactors .................................................................................................................
EME362 PWM and PLC Control with Schneider PLC ..........................................................................................
EME363 PWM and PLC Control with Siemens LOGO PLC ...............................................................................
EME364 PWM and PLC Control with Siemens PLC and HMI ..................................................................... 20
EME365 DC Motor Starting and Control ..................................................................................................................
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
index
Elec
tric
al M
ac
hin
es
index
6
INDEX Assembly and Winding KitsEME710 Lecturer Bench for Machine Testing ................................................................................................... 20
EME711 Student Bench for Machine Testing ..........................................................................................................
EME720 Motor and Transformer Assembly Kit ............................................................................................... 21
EME730 Automatic Transformer Winding Machine ............................................................................................
EME731 Automatic Motor Coil Winding Machine ...............................................................................................
EME732 Eddy Current Brake for Motor Tests ........................................................................................................
Recommended Laboratories ...................................................................................................................... 22
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
7
EME200DC Compound Machine
A 300 W DC Machine with Compound Excitation, for use as a Motor and Generator with the EME200 series Modular Electrical Machines training equipment.
+ Recommended Accessories
• EME200A DC Motor Thyristor Drive
EME200ADC Motor Thyristor Drive
A bench-top half controlled unidirectional single-phase thyristor drive for closed and open-loop control of DC motors.
The drive is recommended for use with the EME200 DC Compound Machine and can also be connected to the EME232 Tachogenerator for feedback of motor speed.
EME201DC Series and Compound Machine
A 300 W DC Machine with separate Series and Compound Excitation, for use as a Motor and Generator with the EME200 series Modular Electrical Machines training equipment.
EME202DC Series Machine
A 300W DC Machine with separate series excitation, for use as a motor with the EME200 series Modular Electrical Machines training equipment.
EME2033-Phase Synchronous Machine
A 3-Phase Synchronous Machine with Asynchronous Starting, for use as a Generator and an Induction Start Motor, with the EME200 series Modular Electrical Machines training equipment.
300
W -
500
W m
ac
hin
es
300W - 500W machines
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
8
EME2043-Phase Cage Rotor Induction Motor
A 500 W 3-Phase Squirrel Cage Induction motor for use with the EME200 series Modular Electrical Machines training equipment.
+ Recommended Accessories
• EME204A 3-Phase Inverter Drive
EME204A3-Phase Inverter Drive
A bench-top microprocessor controlled transistor inverter drive for use with the EME200 Electrical Machines series, recommended for use with the EME204 3-Phase Cage Rotor Induction Motor.
Functions include a sine wave and PWM-Vector control system, impulse run, start and stop for mechanical brake, an electronic thermal relay and digital display mounted in the front panel.
EME204HVHigh Voltage 3-Phase Squirrel Cage Induction motor
A High Voltage 3-Phase Squirrel Cage Induction motor for use with the EME200 series Modular Electrical Machines training equipment.
EME2053-Phase Wound Rotor Induction Motor
A 500W 3-Phase Asynchronous Wound Rotor Induction motor for use with the EME200 series Modular Electrical Machines training equipment.
EME208Single-Phase Motor with Running Capacitor
A 300W Asynchronous Single-Phase Motor with Running Capacitor for use with the EME200 series Modular Electrical Machines training equipment.
300
W -
500
W m
ac
hin
es
300W - 500W machines
NEW PRODUCT
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
9
EME210Single-Phase Repulsion Start Induction Motor
A 240W Single-Phase Repulsion Start Induction motor for use with the EME200 series Modular Electrical Machines training equipment.
EME211Universal AC/DC Motor
A 260/330W Universal AC and DC Motor for use with the EME200 series Modular Electrical Machines training equipment.
EME217Brushless Motor with Servo Drive
A 500W Brushless Motor with servo drive for use with the EME200 series Modular Electrical Machines training equipment.
The unit consists of a brushless synchronous machine with a permanent magnet rotor and a bi-directional servo drive. Brushless motors are typically used for high power applications such as heat pumps, fans and compressors and are managed using drives.
EME218Reluctance Motor
A 450W Reluctance Motor for use with the EME200 series Modular Electrical Machines training equipment.
300
W -
500
W m
ac
hin
es
300W - 500W machines
EME209Single-Phase Capacitor Start and Run Motor with Centrifugal Breaker
A 380 W Asynchronous Single-Phase Motor with Start and Run Capacitors, and a Centrifugal Breaker for use with the EME200 series Modular Electrical Machines training equipment.
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
10
EME220Single-Phase Transformer
A 760VA Single-Phase Transformer for use with the EME200 series Modular Electrical Machines training equipment.
EME2213-Phase Transformer
A 350VA 3-Phase Transformer for use with the EME200 series Modular Electrical Machines training equipment.
EME222Starting Autotransformer for 3-Phase Motors
A 500VA autotransformer for starting 3-phase squirrel cage and double cage motors up to 500W.
VISIT OUR WEBSITE> TO DOWNLOAD OUR TECHNICAL DATASHEETS
For more detailed technical information about our teaching products and to request a quotation, please visit our website at:
www.hft-education.com
Tra
nsfo
rm
er
s
Transformers
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
11
EME230DC Dynamometer
A 450W DC Dynamometer for use with the EME200 series Modular Electrical Machines training equipment.
The unit can be used as a DC Motor or Generator and for measuring the torque of other machines coupled to the unit. Torque is measured by a torque measurement arm that can be mounted at the opposite end of the shaft.
EME231Eddy Current Brake
A 450W Eddy Current Bake for use with the EME200 series Modular Electrical Machines training equipment.
+ Required Accessories
• EME231A Power Supply for Eddy Current Brake
EME231APower Supply for Eddy Current Brake
A variable AC and DC power supply for powering the EME231 Eddy Current Brake.
EME232Tachogenerator
A Tachogenerator for measuring the speed of Electrical Machines in the EME200 series Modular Electrical Machines training range.
EME233Electromagnetic Powder Brake
An Electromagnetic Powder Brake with control box and instrumentation, for measuring the mechanical and electrical characteristics of electrical motors, including the torque curve and mechanical power output.
Br
ak
es, D
yn
am
om
ete
rs a
nd
Tac
ho
ge
ne
ra
tor
s
Brakes, Dynamometers and Tachogenerators
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
12
EME260Computerised Measurement System
A computerised measurement system with data acquisition and control software, for measuring AC and DC voltages, currents and powers, speed and force of rotating machines, and temperatures.
The system is supplied with temperature probes, a strain gauge load cell for torque measurement and an optical transducer for speed measurement. Software is used to display measured values in real time, create trends and graph values.
The EME260 can be used for automatic tests with the EME291 Programmable AC/DC Power Supply.
EME262Analogue and Digital Instrumentation
A set of frame-mounted analogue and digital measurement instruments for measurements on 300 - 500W static and rotating electrical machines.
EME263Bench-Top Modular Frame
A bench-top frame for mounting the measuring instruments in the EME261 Modular Instrumentation System and the EME262 Analogue and Digital Instruments.
EME264Digital Measurement System
A Multi-Function PC connected Measuring Instrument for use with single-phase and 3-phase applications, for measuring voltages, current, active, reactive and apparent powers, power factor, frequency, active energy, inductive and capacitive reactive energy, total and partial apparent energy and for harmonic analysis.
Instr
um
en
tatio
n
Instrumentation
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
13
EME265Digital Torque Meter
A Digital Torque Meter consisting of a load cell connected to a digital display, for measuring the torque of electrical machines.
The torque meter is recommended for use with the EME230 DC Dynamometer. The load cell mounts directly on the DC machine.
EME266Digital Torque, Speed and Mechanical Power Meter
A Digital Torque, Speed and Mechanical Power measuring system for use with Electrical Machines from the EME200 Electrical Machines range.
The unit includes an optical reflection transducer for speed measurement and a 20 kg load cell for torque measurement. Measured values are displayed on a digital display, or on a computer using the optional data acquisition software.
EME267Electronic Digital Revolution Counter
A digital microprocessor instrument for measuring the RPM of any rotating device without the need for a mechanical coupling.
The unit can also be used as an impulse counter or a chronometer and includes a selector switch for setting the relay trip value according to a set-point value.
Instr
um
en
tatio
n
Instrumentation
Industrial Motor Control TrainingNEW FOR 2015
HFT Education has launched a new range of Industrial Motor Control Training Systems, for studying Motor starting and control using contactors and switches, with optional accessories for studying motor control using PWM drives, PLCs and HMIs.
The equipment is designed using real industrial components, with options for both Schneider and Siemens PLCs to suit local industry standards.
See page 19 to see the EME360 series training boards and visit our website www.hft-education.com for technical datasheets.
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
14
EME272Series Field Rheostat
A 500W laboratory Series Field Rheostat with windings on a porcelain cylinder, slider for varying the resistance and safety connection terminals, for use with the EME200 series Electrical Machines range.
EME2733-Phase Rotor Starting Rheostat
A 500W 3-Phase Rotor Starting Rheostat with windings on porcelain cylinders, slider for varying the resistance and safety connection terminals, for use with the EME200 series Electrical Machines range.
EME274Starting Rheostat for Wound Rotor Induction Motor
A 500W Starting Rheostat for progressive starting of 3-phase asynchronous wound rotor induction motors, recommended for use with the EME205 3-Phase Wound Rotor Induction Motor.
Rh
eosta
ts
Rheostats
EME270Generator Shunt Field Rheostat
A 500W laboratory Generator Shunt Field Rheostat with windings on a porcelain cylinder, slider for varying the resistance and safety connection terminals, for use with the EME200 series Electrical Machines range.
EME271Motor Shunt Field Rheostat
A 500W laboratory Motor Shunt Field Rheostat with windings on a porcelain cylinder, slider for varying the resistance and safety connection terminals, for use with the EME200 series Electrical Machines range.
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
15
EME281Variable Inductive Load
A Variable Inductive Load Bank with 3 ohmic sectors and 21 single-phase reactive power values, for use with the EME200 Electrical Machines range.
EME282Variable Capacitive Load
A Variable Capacitive Load Bank with 3 ohmic sectors and 21 single-phase reactive power values, for use with the EME200 Electrical Machines range.
EME285Mechanical Flywheel Load
An experimental flywheel for use as a mechanical load with the EME200 Electrical Machines range of products.
The unit consists of a metallic flywheel mass enclosed in a bench-top educational case, with an 80 mm high shaft for coupling to electrical machines. The flywheel is made from three heavy metal discs which can be used independently or in combination to vary the moment of inertia.
Loa
ds
Loads
EME280Variable Resistive Load
A Variable Resistive Load Bank with 3 ohmic sectors and 21 single-phase active power values, for use with the EME200 Electrical Machines range.
experienced staffand consultants
The HFT Education Food Processing Technology range is a flexible modular system that can be configured to match your curriculum requirements. Our experienced staff and consultants will recommend modules that will suit your specific needs.
For more information please contact us on:sales@hft-education.com
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
16
EME292Variable Power Supply
A variable AC and DC power supply for powering Electrical Machines from the EME200 series Electrical Machines range.
The power supply outputs a fixed DC voltage and variable AC or DC voltage, and is recommended for use with the EME261 Modular Instrumentation System for tests with the EME200 Series Electrical Machines range.
EME293Variable Power Supply with Low Voltage Section
A variable AC and DC power supply for powering Electrical Machines from the EME200 series Electrical Machines range.
The power supply outputs a fixed DC voltage, fixed low DC voltage and variable AC or DC voltage, and is recommended for use with the EME261 Modular Instrumentation System for tests with the EME200 Series Electrical Machines range.
EME950bench-top variable single and 3-phase AC and DC power supply
A bench-top variable single and 3-phase AC and DC power supply for powering the HFT Education Modular Electrical Machines range.
Po
we
r Su
pplies
Power Supplies
EME291Programmable AC/DC Power Supply
An advanced programmable AC and DC power supply for powering Electrical Machines from the EME200 series Electrical Machines range. The power supply outputs a fixed 3-phase voltage, fixed DC voltage and variable AC or DC voltage.
The unit includes a motor driven variable autotransformer for setting the output voltage, which can be controlled using a PC (not supplied) for automatic tests with the EME260 Computerised Measurement System.
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
17
EME312Permanent Magnet DC Motor and 4 QuadrantPWM Drive
An industrial Permanent Magnet DC Motor and 4 Quadrant PWM Drive unit for in-depth study of industrial 4 Quadrant PWM Drives and Permanent Magnet DC Motors.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
EME3133-Phase Asynchronous Motor and Variable Frequency Drive
An industrial 3-Phase Asynchronous Motor and Variable Frequency Drive unit for in-depth study of industrial 3-Phase Asynchronous Motors and Variable Frequency Drives.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
AC
an
d D
C M
oto
r D
riv
es
AC and DC Motor Drives
EME310Stepper Motor and Bipolar Chopper Drive
An industrial Bipolar Chopper Drive and Stepper Motor unit for in-depth study of industrial stepper motors and stepper motor drives.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
EME311DC Shunt Motor and Thyristor Drive
An industrial Thyristor Drive and DC Shunt Motor unit for in-depth study of industrial DC Shunt Motors and Thyristor drives.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
EME3143-Phase Brushless Motor and Bi-directional Drive
An industrial 3-Phase Brushless Motor and Bi-Directional Drive unit for in-depth study of the control of 3-Phase Brushless Motors.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
18
EME10Combined DC Motor Drive Trainer
A combined DC Motor Drive trainer for studying the mechanical and electrical characteristics of DC motors, DC motor drives, 2 quadrant and 4 quadrant MOSFET drives.
+ Required Accessories
• EME950 Universal Power Supply• EME200 DC Compound Machine• EME232 Tachogenerator
EME11Combined AC Motor Drive Trainer
A combined AC Motor Drive trainer for studying the mechanical and electrical characteristics of AC motors and drives, including PWM, FOC and frequency drives and PID control.
+ Required Accessories
• EME950 Universal Power Supply• EME204 3-Phase Cage Rotor Induction Motor• EME232 Tachogenerator
AC
an
d D
C M
oto
r D
riv
es
AC and DC Motor Drives
Products for Electrical and Electronics EngineeringHFT Education has a comprehensive range of products for teaching Electronics, Electrical Machines, Electrical Power Systems and Renewable Energies.
Please see the relevant product catalogue or visit our website www.hft-education.com for more information
EME3153-Phase Asynchronous Motor and Vector Drive
An industrial 3-Phase Asynchronous Motor and Vector Drive unit for in-depth study of the control of 3-Phase Asynchronous Motors.
The unit includes a fault simulator for troubleshooting and diagnostic testing, and computer interface for data acquisition and control (SCADA).
EME316Linear Motor Trainer
A bench-top linear motor trainer for studying the construction, characteristics, operation and application of linear motors using a permanent magnet synchronous linear motor and a servo drive.
The unit includes a computer interface for data acquisition.
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
19
Ind
ustr
ial M
oto
r C
on
tro
l
Industrial Motor Control
EME360Motor Control with Contactors and Switches
The EME350 Electrical Machines Control and Fault Finding system is a bench-top unit for studying, troubleshooting and fault-finding a wide number of circuits used to control Electrical Machines.
EME50Electrical Machines Control and Fault Finding
The EME350 Electrical Machines Control and Fault Finding system is a bench-top unit for studying, troubleshooting and fault-finding a wide number of circuits used to control Electrical Machines.
EME361Motor Control with Contactors
An industrial control unit for studying cabled direct and sequenced starting of single and 3-phase AC motors with electromagnetic devices, including contactor control, reversing contactors, rotor resistance starting and counter-current braking.
EME362PWM and PLC Control with Schneider PLC
An industrial motor control training system for studying PWM and PLC motor control using a Schneider PLC, designed for use with the EME360 Motor Control with Contactors and Switches or the EME361 Motor Control with Contactors.
EME363PWM and PLC Control with Siemens LOGO PLC
An industrial motor control training system for studying PWM and PLC motor control using a Siemens LOGO PLC, designed for use with the EME360 Motor Control with Contactors and Switches or the EME361 Motor Control with Contactors.
+ Recommended Accessories
• EME204HV 3-Phase cage Rotor Induction Motor
+ ReQuired Accessories
• EME204 3-Phase Asynchronous Cage Rotor Induction Motor• EME204HV 3-Phase Cage Rotor Induction Motor (High Voltage)• EME205 3-Phase Wound Rotor Induction Motor• EME208 Single-Phase Asynchronous Capacitor Start Motor• EME222 Starting Autotransformer for 3-Phase Motors• EME273 3-Phase Rotor Starting Rheostat• EME285 Mechanical Flywheel Load
+ ReQUIRED Accessories
• EME360 Motor Control with Contactors and Switches• EME361 Motor Control with Contactors
+ ReQUIRED Accessories
• EME360 Motor Control with Contactors and Switches• EME361 Motor Control with Contactors
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Elec
tric
al M
ac
hin
es
20
Ind
ustr
ial M
oto
r C
on
tro
l / Asse
mb
ly a
nd
Win
din
g K
its
Industrial Motor Control
Assembly and Winding Kits
EME710Lecturer Bench for Machine Testing
A bench for testing and quality control of machines assembled by students, recommended for the EME720 Motor and Transformer Assembly Kit.
EME711Student Bench for Machine Testing
A bench with integrated power supply for testing electrical machine and transformers assembled by students, recommended for the EME720 Motor and Transformer Assembly Kit.
EME364PWM and PLC Control with Siemens PLC and HMI
An industrial motor control training system for studying PWM and PLC motor control using a Siemens PLC and HMI panel, designed for use with the EME360 Motor Control with Contactors.
EME365DC Motor Starting and Control
An industrial DC motor starting and control training system for studying DC motor starting and control with step rheostats with manual and automatic exclusion and linear rheostats with a 4-quadrant electronic drive.
+ ReQUIRED Accessories
• EME204HV 3-Phase Cage Rotor Induction Motor (High Voltage)• EME285 Mechanical Flywheel Load• EME360 Motor Control with Contactors and Switches
+ ReQUIRED Accessories
• EME232 Tachogenerator• EME365A DC Motor for EME365
NEW PRODUCT
NEW PRODUCT
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
21
EME720Motor and Transformer Assembly Kit
The EME720 is a kit of components and accessories for assembling and disassembling electrical machines and transformers.
+ Recommended Accessories
• EME720A Set of Tools for Motor and Transformer Assembly
Asse
mb
ly a
nd
Win
din
g K
its
Assembly and Winding Kits
EME732Eddy Current Brake for Motor Tests
An Eddy Current Brake for testing motors up to 1800W and 2800 r.p.m., recommended for testing motors assembled using the EME720 Motor and Transformer Assembly Kit.
+ Required Accessories
• EME732A Power Supply for Eddy Current Brake
EME730Automatic Transformer Winding Machine
The EME730 is an Automatic Transformer Winding Machine for use in the laboratory environment.
EME731Automatic Motor Coil Winding Machine
An Automatic Motor Coil Winding Machine for manufacturing the coils of rotating machines.
HFT Educationfor Quality
HFT Education teaching products are manufactured in Europe under an ISO 9001 quality manufacturing system, using state-of-the-art production techniques and equipment. Our robust industrial standard components, high quality materials and skilled production staff make sure that our equipment has a long working life.
All HFT Education products are supplied with a 2 Year Warranty
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Recommended Laboratories
Elec
tric
al M
ac
hin
es
Rec
om
me
nd
ed
Lab
or
ato
rie
s
22
Recommended Laboratories
3-Phase Synchronous Machines Laboratory3-Phase Synchronous Machine ............EME203 3-Phase Synchronous Machine
Variable Reluctance Motor ....................EME218 Reluctance Motor
Prime mover & Torque Measurement ..EME230 DC Dynamometer
Motor/Generator Field Rheostat ......EME270 Generator Shunt Field Rheostat [QTY 2]
Electrical Loads ............................................EME280 Variable Resistive Load......................................................................................EME281 Variable Inductive Load......................................................................................EME282 Variable Capacitive Load
Instrumentation and Power SuppliesOption 1:
Standard Instrumentation ......................EME293 Variable Power Supply with Low Voltage Section......................................................................................EME263 Bench-Top Modular Frame......................................................................................EME262 Analogue and Digital Instrumentation......................................................................................EME232 Tachogenerator
Option 2:
Computerised Instrumentation ...........EME291 Programmable AC/DC Power Supply......................................................................................EME260 Computerised Measurement System
3-Phase Asynchronous Machines Laboratory3-Phase Synchronous MachineS .......... EME204 3-Phase Asynchronous Cage Rotor Induction Motor
3-phase wound rotor induction motor ..EME205 3-Phase Wound Rotor Induction Motor
Prime Mover & Torque Measurement ..EME230 DC Dynamometer................................................................................................ EME231 Eddy Current Brake................................................................................................ EME233 Electromagnetic Powder Brake
Electrical LoadS ............................................EME280 Variable Resistive Load
Motor/Generator Field Rheostat ......EME270 Generator Shunt Field Rheostat
Motor Starting Rheostat ..........................EME273 3-Phase Rotor Starting Rheostat
Instrumentation and Power SuppliesOption 1:
Standard Instrumentation ......................EME293 Variable Power Supply with Low Voltage Section......................................................................................EME264 Digital Measurement Systems [QTY 2]......................................................................................EME262 Analogue and Digital Instrumentation......................................................................................EME263 Bench-Top Modular Frame......................................................................................EME232 Tachogenerator
Option 2:
Computerised Instrumentation ...........EME291 Programmable AC/DC Power Supply......................................................................................EME260 Computerised Measurement System
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
23
Recommended Laboratories
Rec
om
me
nd
ed
Lab
or
ato
rie
s
DC Machines LaboratoryDC Motor / Generator .................................... EME201 DC Series and Compound Machine
Torque Measurement ....................................... EME230 DC Dynamometer, or, ................................................................................................ EME231 Eddy Current Brake, or,................................................................................................ EME233 Electromagnetic Powder Brake
Electrical Loads ................................................. EME280 Variable Resistive Load
Motor/Generator Field Rheostat ....... EME270 Generator Shunt Field Rheostat
Motor Starting Rheostat ............................. EME273 3-Phase Rotor Starting Rheostat
Instrumentation and Power SuppliesOption 1:
Standard Instrumentation ......................EME293 Variable Power Supply with Low Voltage Section................................................................................................ EME263 Bench-Top Modular Frame................................................................................................ EME262 Analogue and Digital Instrumentation................................................................................................ EME232 Tachogenerator
Option 2:
Computerised Instrumentation ...........EME291 Programmable AC/DC Power Supply................................................................................................ EME260 Computerised Measurement System
Optional AccessoriesDC Motor Drive .................................................EME200a DC Motor Thyristor Drive
Electrical Machines
2014/15 | visit www.hft-education.com for more information <
Recommended Laboratories
Elec
tric
al M
ac
hin
es
Rec
om
me
nd
ed
Lab
or
ato
rie
s
24
Single Phase Motors BenchSplit Phase Motor and .................................EME209 Single-Phase Capacitor Start and Run MotorCapacitor Start Motor with Centrifugal Breaker
Capacitor Run Motor ...................................EME208 Single-Phase Motor with Running Capacitor
Universal Motor ..............................................EME211 Universal AC/DC Motor
Repulsion Motor .............................................EME210 Single-Phase Repulsion Start Induction Motor
Torque Measurement ...................................EME230 DC Dynamometer, or,......................................................................................EME231 Eddy Current Brake, or,......................................................................................EME233 Electromagnetic Powder Brake
Electrical LoadS ............................................EME280 Variable Resistive Load
Shunt Field Rheostat ...................................EME270 Generator Shunt Field Rheostat
3-Phase Transformer ..................................EME221 3-Phase Transformer
Instrumentation and Power SuppliesOption 1:
Standard Instrumentation ......................EME293 Variable Power Supply with Low Voltage Section......................................................................................EME263 Bench-Top Modular Frame......................................................................................EME262 Analogue and Digital Instrumentation......................................................................................EME264 Digital Measurement System [QTY 2]......................................................................................EME232 Tachogenerator
Option 2:
Computerised Instrumentation ...........EME291 Programmable AC/DC Power Supply......................................................................................EME260 Computerised Measurement System
Recommended Laboratories
Electrical Machines
> visit www.hft-education.com for more information | 2014/15
Elec
tric
al M
ac
hin
es
25
Single and 3-Phase Transformers BenchSingle Phase Transformer .......................EME220 Single-Phase Transformer
3-Phase Transformer ..................................EME221 3-Phase Transformer
Electrical Loads ............................................EME280 Variable Resistive Load......................................................................................EME281 Variable Inductive Load......................................................................................EME282 Variable Capacitive Load
Instrumentation and Power SuppliesOption 1:
Standard Instrumentation ......................EME293 Variable Power Supply with Low Voltage Section......................................................................................EME264 Digital Measurement System [QTY 2]
Option 2:
Computerised Instrumentation ...........EME291 Programmable AC/DC Power Supply......................................................................................EME260 Computerised Measurement System
Rec
om
me
nd
ed
Lab
or
ato
rie
s
Recommended Laboratories
our service promise
www.hft-education.com
We promise to provide information and support quickly and with a high level of expertise and technical knowledge
We understand If your teaching equipment is not working as you expect, your students will not be able to complete their studies.
industrial quality That’s why our products are built to the highest European standards using industrial quality components.
two year warranty This commitment to quality is supported by our two year warranty, which covers all HFT Education products.
email support@hft-education.com
TELEPHONE +44 (0) 845 5199 280 / 290
FAX +44 (0) 845 5199 260
if you need support
To help us to deliver the high level of service that you expect, please provide us with the following important information with your support requests:
• Equipment Model Number
• Equipment Serial Number
• Details of your request, enquiry or question
EXPERIMENT Details of the experiment or process that was being performed when you noticed a change in the equipment.
results What results were you obtaining from the experiment? Please send us the actual data readings.
photographs Digital photographs of the equipment will help us to make a quicker and more accurate diagnosis.
We request that the information provided is as detailed and accurate as possible, to help us make a quick and accurate diagnosis and identify the best solution.