Post on 07-Mar-2016
description
461
Flightcases
19" Data CabinetsPage 462
19" Equipment RacksPage 463
19" Rack AccessoriesDoors Panels Shelves Security covers Fixing kit
Pages 464 - 465
Microphone Bags & Cases3-in-1 case set Aluminium vinyl flight cases
Pages 474 - 475
Gooseneck LightingPage 476
19" Rack Bags & CasesBags Cases Trolley cases Flight cases Coffin cases Wheel bases for flight cases Racks with wheels Flight cases for mixers and Tunetables
Pages 466 - 473
FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
462
19” DATA CABINETS 600 x 600mm
• Simple structure, easy to assemble• Tough glass door• Lockable bottom cable entry• Castor height 70mm
High quality, flat packed data cabinets suitable for PA and telecoms installation.
952.600 952.603Size 21U 36UDimensions 1140 x 600 x 600mm 1805 x 600 x 600mmWeight 47kg 63kg
Adjustable feet and heavy duty castors
Removable side panels and rear door
5
2
1
9
8
4 610 11
12
7
3
1
2
9
8
4 6 10 11
73
12
Top coverFrameFront doorSide panel
1234
Rear doorHorizontal beamBottom panelMounting angle
5678
Mounting profileTray2” heavy duty castorSmall round lock
9101112
Key lock for security
All round ventilation
19” Rack AccessoriesA variety of 19” rack accessories to complete many types of system installation.
19” rack mountable
FLIGHTCASES | 19" DATA CABINETS
463
ASSEMBLY & INSTALLATION OF EQUIPMENT RACKS
19” EQUIPMENT RACKS - 435mm DEPTH
19” EQUIPMENT RACKS
• Manufactured from 1.5mm zinc coated steel• Fixing rails to front and rear with holes
punched at 44.45mm (1.75”) centres• Pre drilled to allow fitting of doors• 35mm distance from mounting
rail to front edge
19” equipment racks in black scratch resistant textured powder coated finish. Supplied in flat-packed kit form for easy self assembly. NOTE: No accessories supplied.
Ensure the flat side is on the outer surface.Place the top upside down on a flat surface and fix the side panels as shown in diagram 1. The side panels overlap both top and bottom panels. The small tongues located at the four corners of both top and bottom panels fit inside the channel section of the side panels.Align and fasten the 4 inner corner screws.
Attach the base to the side panels, align and secure the corner fixings.If required, a lockable door can be fitted. Place the location pivot (A in diagram 2) of the door into the pre-drilled hole on the bottom rail of the cabinet and fasten the spring loaded lever (B in diagram 2) into the pre-drilled hole in the top rail.NOTE: Install equipment before fitting door.
19” EQUIPMENT RACKS - 568mm DEPTH
952.551 952.554 952.557 952.560 952.563 952.566 952.569Size 6U 8U 12U 16U 20U 28U 35UDims 545 x 370 x 435mm 545 x 455 x 435mm 545 x 635 x 435mm 545 x 815 x 435mm 545 x 990 x 435mm 545 x 1340 x 435mm 545 x 1650 x 435mmWeight 14.5kg 16kg 18.5kg 24kg 28kg 30kg 35.5kg
952.550 952.553 952.556 952.559 952.562 952.565 952.568Size 6U 8U 12U 16U 20U 28U 35UDims 545 x 370 x 568mm 545 x 455 x 568mm 545 x 635 x 568mm 545 x 815 x 568mm 545 x 990 x 568mm 545 x 1340 x 568mm 545 x 1650 x 568mmWeight 17kg 19kg 22kg 25.5kg 28.5kg 36kg 42.5kg
Diagram 1 Diagram 2
A - Locating pivot
B - Spring loaded lever
19" EQUIPMENT RACKS | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
464
LOCKABLE METAL DOORSAvailable for all rack sizes. Fitted with hinges and lock supplied with 2 keys. 1mm black powder coated steel.
19” BLANKING PANELSSteel 19” rack blanking panels. Fixing screws supplied.
19” VENTILATED PANELSSteel 19” rack vented blanking panels. Fixing screws supplied.
LOCKABLE TOUGHENED GLASS DOORS
Available for all rack sizes. Fitted with hinges and lock supplied with 2 keys.
Size Dimensions Weight952.570 6U 264 x 482 x 21mm 1.78kg952.572 8U 352 x 482 x 21mm 2.24kg952.574 12U 528 x 482 x 21mm 3.15kg952.576 16U 704 x 482 x 21mm 4.06kg
Size Dimensions Weight853.011 1U 44 x 482mm 300g853.014 2U 88 x 482mm 520g853.017 3U 132 x 482mm 740g853.020 4U 176 x 482mm 970g
Size Dimensions Weight853.023 1U 44 x 482mm 260g853.026 2U 88 x 482mm 430g853.029 3U 132 x 482mm 650g853.032 4U 176 x 482mm 880g
Size Dimensions Weight952.584 6U 264 x 482 x 21mm 1.91kg952.586 8U 352 x 482 x 21mm 2.52kg952.588 12U 528 x 482 x 21mm 3.74kg952.590 16U 704 x 482 x 21mm 4.97kg952.592 20U 880 x 482 x 21mm 6.19kg952.594 28U 1232 x 482 x 21mm 8.64kg952.596 35U 1540 x 482 x 21mm 10.78kg
19” RACK DRAWER
• Heavy duty steel construction
Rack mounting steel drawer unit with ball-race sliding mechanism and latching handle.
SizeInternal Dimensions
External Dimensions Weight
853.050 2U60 x 398 x 350mm
88 x 483 x 375mm 6.0kg
1U PATCH PANELS
• IEC panel has integral earthing post
1U 19” rack panels punched to accept various connectors. Supplied with fixing hardware.
Size Version Dimensions Weight
853.078 1U8 IEC connector
483 x 44 x 12.5mm 340g
853.079 1U12 D-size connector
483 x 44 x 12.5mm 340g
* Connectors not supplied
FLIGHTCASES | 19" RACK ACCESSORIES
465
19” SUPPORT MODULESSteel finish. Fixing screws supplied.
Size Dimensions Weight853.035 1U 44 x 482 x 267mm 1.71kg853.038 2U 88 x 482 x 267mm 1.91kg853.041 3U 132 x 482 x 267mm 2.11kg
19” SUPPORT SHELF 2USupport shelf for rackmounting 2 half-width units or equipment narrower than 450mm (17.7”) width into a 2U 19” rack space. Fixing hardware not supplied.
Size Dimensions Weight853.055 2U 482 x 88 x 376mm 1.5kg
20kg
Max.weightload
1U CABLE MANAGEMENT BAR
• Black powder coat finish
Ideal to ensure good cable management in Network and PA rack mount installations.
Size Dimensions Weight710.625 1U 483 x 75 x 44.8mm 431g
19” RACK SECURITY COVERS
• Rack fasteners are hidden/covered to prevent removal• Can be installed left-hand or right-hand locking• Security for noise abatement equipment (comp/limiter etc.)• Padlock included (can be substituted)
25mm deep covers to protect controls on rackmount equipment. Held in place by 2 hidden brackets, lockable at one end with the included padlock. Intended as a security or anti-tamper measure for installed rack units.
Size Dimensions Weight853.071 1U 44 x 483 x 25mm 500g853.072 2U 88 x 483 x 25mm 700g853.075 2U Vented 88 x 483 x 30mm 700g
Item ref952.295
RACK FIXING KIT
• 20 x M6 captive nuts• 20 x M6 cross-head bolts• 20 x plastic cup washers
Set of M6 captive nuts, bolts and plastic washers for fixing equipment to standard rack strip.
Dimensions . . . . . . . . . . . . . . . . . . . .100 x 100mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200gThread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M6
Item ref180.271
FREESTANDING RACK FOR 19" EQUIPMENT• Sturdy metal rack for mounting 19" equipment• Tilting mixer rack
Mixer rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12UEquipment rack . . . . . . . . . . . . . . . . . . . . . . . . . . .9UDimensions . . . . . . . . . . . . . .470 x 530 x 390mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.8kg
19" RACK ACCESSORIES | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
466
RACK BAGS
• Sturdy internal wooden frame• Rack strip front and rear
• Securing straps inside flaps• Zipped external pocket
19” rack case in a padded bag with front and rear flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear.
• Sturdy internal wooden frame• Rack strip front and rear
• Securing straps inside flaps• Zipped external pocket
19" rack case in a padded bag with front and rear flaps for access and ventilation. Equipment is protected by an inner wooden frame and secured by metal rack strip front and rear. Also fitted with carrying handle, shoulder strap and zipped outer pocket.
SHALLOW 19" RACK BAGS
FLIGHTCASES | 19" RACK BAGS
RACKBAG2US RACKBAG3US RACKBAG4USItem ref 127.186 127.187 127.188Size 2U 3U 4UDimensions 550 x 165 x 240mm 550 x 210 x 240mm 550 x 250 x 240mmWeight 2.25kg 2.65kg 2.9kg
RACKBAG2U RACKBAG3U RACKBAG4UItem ref 127.146 127.147 127.148Size 2U 3U 4UDimensions 550 x 380 x 165mm 550 x 380 x 210mm 550 x 380 x 250mmWeight 3.66kg 4.26kg 4.86kg
467
ABS 19” EQUIPMENT RACK CASES
• Protection for your equipment during transport and storage• Made from durable ABS• Carrying handles on both sides• Can be opened from both the front and rear• Stackable• M5 rack fixing screws supplied
ABS:3U ABS:10U ABS:12UItem ref 127.150 127.112 127.115Unit depth 3U 10U 12UDimensions : External 570 x 210 x 560mm 570 x 520 x 560mm 570 x 595 x 560mmDimensions : Internal 455 x 137 x 415mm 455 x 450 x 415mm 455 x 540 x 415mmWeight 4.1kg 7.7kg 9.0kg
ABS2US ABS3US ABS4USItem ref 127.117 127.118 127.119Internal depth (front to rear rack) 200mm 200mm 200mmRacking height 2U (88mm) 3U (132mm) 4U (176mm)External Dimensions 525 x 156 x 355mm 525 x 200 x 355mm 525 x 244 x 355mmWeight 3.5kg 4.0kg 4.5kg
ABS:U
ABS 19” SHALLOW RACK CASESABS plastic transport cases for 19” equipment with shallow depth. Ideal for wireless microphones, audio processors and rack mixers.
• Shallow depth for easy access and storage• Rack strip front and rear• Carrying handles• Front and rear lids• Stackable• M5 Fixing screws supplied
ABS:US
19" RACK CASES | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
468
DJ ABS CASESMoulded ABS flight cases for 19” rack DJ equipment. Front facing rack strip for drawer units and other players or outboard equipment. Top facing tilted rack for mixer and remote unit(s). Rear lid to allow access to signal connections and mains. Aluminium sealing strip and case clips on all lids.
• Tilted mixer/remote top rack• Full front and rear lids
for easy access• Integral carrying handles
ABSDJ246 ABSDJ4610Item ref 127.152 127.154Rack sizes 2U front; 4U rear; 6U top 4U front; 6U rear; 10U topDimensions 564 x 550 x 336mm 564 x 700 x 550mmWeight 5.9kg 6.6kg
ABS 19” RACK TROLLEY CASES TILT-TOP 19” PA RACK CASE
ABS 19” TILT-UP MIXER CASE
ABS plastic transport cases for 19” equipment fitted with wheels and a retractable handle for easy portability.
A large ABS 12U 19” equipment rack case with a 10U tilt-up mixer top rack. Ruggedly built with aluminium sealing strip on front back and top lids with chrome catches. Strong integral handles and 4 castors make for easier moveability.
A 19” x 10U tilt top ABS rack case for mixing console or other rack-mountable control surface. Ratchet-type tilting mechanism for angle adjustment and detachable lid allow the console to be used in the case.
• Retractable trolley mechanism• Made from durable ABS• Front and rear lids• Stackable with other Citronic ABS rack cases • Tilt-top 10U mixer rack
• 4 x swivel castors with brakes• Rack strips front and back
for extra versatility
• Strong ABS case with aluminium sealing strip and chrome clips
• Ratchet mechanism for tilting rack• Detachable top lid• Swivel carrying handle
Rack Capacity . . . . . . . . . . . . . . . . . . . . . 5U full depth + 1U shallowDimensions : External . . . . . . . . . . . . . . . . . . . . 550 x 560 x 350mmDimensions : Internal . . . . . . . . . . . . . . . . . . . . . 455 x 274 x 415mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.6kg
Rack Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12U front x 10U topDimensions : External . . . . . . . . . . . . . . . . . . . . 840 x 530 x 680mmDimensions : Internal . . . . . . . . . . . . . . . . . . . . . 630 x 454 x 447mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12kg
Rack Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19” x 10UWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4kgDimensions : External . . . . . . . . . . . . . . . . . . . . 180 x 510 x 530mmDimensions : Internal . . . . . . . . . . . . . . . . . . . . . 110 x 454 x 447mm
ABS:6UT
ABS:DJ
ABS:PA
ABS:MIX
Item ref127.144
Item ref127.164
Item ref127.166
FLIGHTCASES | 19" ABS CASES
469
19” RACK CASES FOR MIXERRack units for mounting 19” equipment.
• Front and top lids completely removable
• Hinged back door with cable aperture
• Supplied with screws and captive nuts
CASE10:2 CASE10:4Item ref 171.715 171.718Rack sizes 2U + 10U 4U + 10UDimensions 315 x 555 x 627mm 404 x 555 x 627mmWeight 11.94kg 14.43kg
19” COMBO FLIGHT CASE - 2U + 8U
19” RACK DJ FLIGHT CASE
A professional quality case designed and constructed to safely transport, protect and store valuable disco equipment. This combo unit is ideal for power amplifier (2U) and mixer (8U).
A 6U by 3U DJ flight case designed for 19” mixers, live mixers and other media players such as the CDMX1 (170.694) and CDMX2 (170.697) CD player/mixer units. Constructed using 9mm vinyl laminated plywood with heavy duty handles and protective corners.
• Constructed using vinyl laminated 9mm plywood with aluminium location strips to provide rigidity to the case
• Fitted with heavy duty flip handles, steel ball corners, butterfly catches with facility for padlocks and large rubber feet
• Rear hinged access panel with circular cut-out for the power lead• Detachable top and front covers• 2U blanking panel above the amplifier space• Supplied with M6 captive nuts, bolts and
plastic washers for installing equipment
• 6U (mixer) and 3U (CD) sections• Front and top lid
completely removable• Rear access panel• 2 x spring loaded handles• Lockable catches• 4 x rubber feet
Dimensions : External . . . . . . . . . . . . . . . . . . . . 555 x 360 x 530mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14kg
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 x 460 x 270mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6kg
CASE8:2
CASE10 CASE:CDM63
Item ref171.720
Item ref171.772
19" CASES | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
470
UNIVERSAL COFFIN CASE FOR 19” 8U MIXER AND 2 CD PLAYERS
19” DJ FLIGHT CASES
Robust flight case for 19” 8U mixer, 2 x CD players and storage for up to 80 CD cases. There is also a piano hinged protective panel for the mixer which can be folded back and used as a place to store a laptop. This is an ideal piece of equipment for the mobile DJs.
Professional quality cases designed and constructed to safely transport, protect and store valuable disco equipment. The cases comprise 3 different sized sections for a CD control unit, mixer and a CD main unit.
• Removable lid can be used as a stand• Complete with handles, corners and castors• Two 420 x 312mm spaces for CD players• Fitted with wheels for easy transportation• Removable front CD sections
• Fitted with heavy duty flip handles, steel ball corners, butterfly catches with facility for padlocks and large rubber feet
• Rear hinged access panel with circular cut-out for power leads
• Detachable cover• 2U blanking plate across top of front section• Supplied with M6 captive nuts, bolts
and plastic washers for installing equipment
External Dimensions . . . . . . . . . . . . . . . . . . . . 1590 x 500 x 215mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20kg
CASE:UNI
Item ref171.775
CDM242 CDM262 CDM342 CDM362Item ref 171.761 171.762 171.764 171.765CD control unit rack size 2U 2U 3U 3UMixer rack size 4U 6U 4U 6UCD main unit rack size 2U 2U 2U 2UDimensions 495 x 540 x 355mm 570 x 540 x 385mm 510 x 540 x 400mm 600 x 540 x 420mmWeight 12kg 13.5kg 13kg 14.2kg
CASE:CDM
FLIGHTCASES | 19" DJ FLIGHTCASES | COFFIN CASE
471
19’’ FLIGHT CASES FOR AUDIO EQUIPMENTFlight cases for mounting 19” audio equipment. Fitted with heavy duty handles, protective corner pieces and removable front and rear lids. Made from 9mm plywood with washers on all the rivets to strengthen and protect the wood from splitting.
• Ideal for safe transport of your expensive equipment• 9mm vinyl laminated plywood construction• Fitted with heavy duty handles, protective corner
pieces and removable lids• Available in 2, 3, 4, 6, 8, 10, 12 and 16U versions
RACK:2U RACK:3U RACK:4S RACK:4U RACK:6U RACK:8U RACK:10U RACK:12U RACK:16UItem ref 171.730 171.733 171.426 171.427 171.430 171.433 171.436 171.736 171.739Size 2U 3U 4U short 4U 6U 8U 10U 12U 16UExternal dimensions
630 x 135 x 535mm
625 x 180 x 535mm
450 x 225 x 535mm
635 x 230 x 535mm
635 x 310 x 535mm
635 x 410 x 535mm
695 x 490 x 535mm
695 x 585 x 535mm
687 x 755 x 535mm
Internal dimensions
460 x 100 x 500mm
470 x 150 x 500mm
280 x 185 x 500mm
460 x 190 x 500mm
460 x 275 x 500mm
465 x 365 x 500mm
525 x 455 x 500mm
525 x 540 x 500mm
520 x 720 x 500mm
Fixing rails Front Front Front Front Front Front and rear Front and rear Front and rear Front and rearWeight 6kg 7kg 9kg 9kg 12kg 17kg 21kg 22kg 24kg
WHEEL BASE FOR 19” FLIGHT CASESHeavy duty base plate with castors. Each 10cm (4”) castor has a brake mechanism.
• Supplied with fixings• Suitable for models 171.436, 171.736 and 171.739.
(Remove rubber feet for access to nuts)
Max. weight load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250kgDimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610 x 510 x 145mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7kg
WHEELS
Item ref171.742
RACK:U
19" FLIGHT CASES | WHEEL BASE | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
472
19” EQUIPMENT RACKS WITH WHEELSMobile equipment rack with facility to mount a 19” (10U) mixer on top of the unit.
• Front and top lid completely removable• Rear access panel• Robust rack case
• Wheels supplied, can be fitted for easy transport• Ratchet-style tilt-up mixer rack• Max weight load - 250kg
RACK:8X RACK:10X RACK:12X RACK:16XItem ref 171.724 171.726 171.728 171.721Front section 8U 10U 12U 16UDimensions 470 x 540 x 600mm 550 x 540 x 600mm 650 x 540 x 600mm 840 x 600 x 540mmWeight 24kg 26kg 28kg 34kg
FLIGHT CASEFlight case with drawer system to store and transport small devices.
• 2 sections each with 4 drawers• Complete with corners and wheel base• Robust flight case• 8 x (25 x 100mmØ) Castors
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 640 x 600 x 1000mmDrawer internal dimensions . . . . . . . . . . . . . . 115 x 515 x 430mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80kg
ROADIE
RACK:X
Item ref171.757
FLIGHTCASES | 19" EQUIPMENT RACKS WITH WHEELS | ROADIE FLIGHT CASE
473
TILT-UP RACK CASES FOR MEDIA PLAYER & MIXER19” rack cases designed to house Citronic USB/SD media player & mixer units. The rack strip sits onto a fixed incline for easy operation. Plywood construction is trimmed with aluminium extrusion and fitted with corner protectors.
• Rack strip can tilt to 90° for connection access• Sturdy carrying handle• Removable lid
CASE:T-SERIES
CASE:T3U CASE:T4UItem ref 171.773 171.774Rack height 3U (132mm) 4U (176mm)Dimensions (closed) 190 x 540 x 240mm 245 x 550 x 265mmWeight 4.2kg 5.2kg
FLIGHT CASE FOR A MIXER AND 2 x TURNTABLESRobust flight case ideal for the DJ on the move.
• Complete with handles, corners and castors• Completely removable lid• 457 x 400 space for CD players or turntables
Mixer space . . . . . . . . . . . . . . . . . . . . . . . . . . 8U, 19" Dimensions . . . . . . . . . . . . 1560 x 470 x 240mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15.6kg
CASE:TT19
Item ref171.709
TILT-UP RACK CASES | TURNTABLE FLIGHTCASE | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
474
ABS MICROPHONE FLIGHT CASES
ABS:MIC
• Twin chrome clips for added security (1 lockable. 2 keys supplied)• Top carrying handle
Sturdy ABS cases with foam inserts to accept handheld microphones and a section for cables or accessories.
MICROPHONE FLIGHT CASESpecially designed aluminium finish case for safe storage of microphones. A pre-diced foam insert suits any microphone.
Dimensions External . . . . . 120 x 250 x 350mmDimensions Internal . . . . . . . 90 x 230 x 330mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7kg
6 MICROPHONES & LEADS BAG
MLBAG6
MFC330
• Fitted with handle and shoulder strap
• Twin adjustable fastening straps for lid
• Heavy duty 10mm padding
Padded transit bag with foam block, holding up to 6 microphones and an adjacent segmented section for leads and other equipment. An additional 2-section outer pocket is included for accessories and a strong handle and shoulder strap aid portability.
External Dimensions . . . . .400 x 250 x 290mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 920g
WIRELESS MICROPHONE TRANSIT BAG
WMBAG2
Padded transit bag for wireless system or other equipment with segmented foam interior, allowing sections to be removed to accommodate specific shapes.
An additional 2-section outer pocket is included for leads and other accessories and a strong handle and shoulder strap aid portability.
External Dimensions . . . . .470 x 370 x 130mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8kg
CARRYING BAG FOR MICROPHONE STAND
MB-1
Carrying bag for mic stand manufactured from strong water repellent material. Fitted with carrying handles and hook and loop fastening flap.
Internal length x width . . . . . . . 1100 x 180mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4kg
FLIGHTCASES | MICROPHONE BAGS & CASES
Item ref127.167
Item ref127.035
Item ref127.037
Item ref180.010
Item ref Model Capacity External dimensions Internal dimensions Weight127.168 ABS:MIC6 6 microphones 330 x 340 x 300mm 310 x 325 x 270mm 2.5kg127.170 ABS:MIC12 12 microphones 440 x 340 x 300mm 410 x 325 x 270mm 2.8kg
475
• Wheels and extending handle• Adjustable inserts• Lockable catches, 2 keys supplied
TOOL CASE ON WHEELS ALUMINIUM 12” VINYL FLIGHT CASE
ALUMINIUM 12” VINYL FLIGHT CASE
A robust, aluminium tool case with integral trolley. LP case with a shiny aluminium finish and soft plastic lining, ensures maximum protection of your LPs.
This case will hold up to 50 x 12” vinyl records, with internal padding for vinyl protection. The outside of the case features chrome plated steel corners giving additional strength and protection, tough diamond patterned finish, padded carry handle and lockable lid catch (lock required).
Dimensions . . . . . . . . . . . . . .455 x 330 x 152mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8kg
Dimensions . . . . . . . . . . . . . .375 x 345 x 275mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.75kg
Dimensions . . . . . . . . . . . . . .350 x 350 x 200mmWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2kg
Item ref127.009
Item ref127.033
Item ref127.028
LP:50D
• Plastic covered plywood construction with aluminium edging and durable plastic corners
• Carry handle• Lockable drawbolt catches• Clip-on shoulder strap included• Foam rubber lining
3-in-1 CASE SETA set of 3 cases in red, blue and black, ideal for the storage and transport of leads, accessories, tools, gaffa tape and much more.
Dimensions : Black . . . . . . .460 x 335 x 150mmDimensions : Blue . . . . . . . .430 x 290 x 120mmDimensions : Red. . . . . . . . . . 400 x 250 x 90mmWeight : Black . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8kgWeight : Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5kgWeight : Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2kg
Item ref127.092
CASE:3-1
CASE-TC01 LP:50
3-IN-1 CASE SET | TOOL CASE | VINYL FLIGHTCASES | FLIGHTCASES
www.avsl.comT 0845 270 2411 F 0845 270 2433 E sales@avslgroup.com
476
ALUMINIUM CD FLIGHT CASESA range of robust aluminium flight cases for storage of CDs. The case features internal padding, with separators for the CDs. The outside of the case is made from tough diamond patterned aluminium with curved extrusions and chrome plated steel corners and hardware. The catches secure the removable lid and can be locked using the keys provided, the carry handle has cushioning for comfort. Ideal for the mobile DJ.
• Hold 40, 60, 80, 96 and 120 CDs• Aluminium case with strong chrome corners,
handle, hinges and lockable catches, 2 keys supplied (Except 127.052)
• Detachable lid• Lined case for maximum CD protection
CDA-SERIES
CDW-40 CDA-40 CDA-60 CDA-80 CDA-96 CDA-120Item ref 127.052 127.064 127.058 127.065 127.060 127.066Holds 40 CDs 40 CDs 60 CDs 80 CDs 96 CDs 120 CDsDimensions External 277 x 160 x 41mm 285 x 180 x 250mm 430 x 180 x 260mm 430 x 180 x 330mm 430 x 180 x 380mm 570 x 180 x 400mmWeight 0.56kg 2.5kg 2.5kg 2.5kg 2.5kg 2.5kg
CD/DVD CARRY CASE• Ideal for storing CDs or DVDs• Soft lined plastic sleeves to protect discs• Zip and handstrap
Item ref Holds126.912 200 CDs
• 4 x bright LEDs• Fitted with a BNC connector• Removable light head
GOOSENECK BNC LED LAMPAn LED lamp on a flexible gooseneck. It is powered by the unit to which it is connected.
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Vdc, 500mAGooseneck length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mm
Item ref173.501
• Adjustable light intensity• Mains adaptor included• Lamp fitted
• Adjustable light intensity• Mains adaptor included• Lamp fitted• Spare lamp supplied
DUAL GOOSENECK LIGHTING BAR
GOOSENECK LAMP WITH TABLE CLIP
Two flexible gooseneck lamps on a 19” rack mounting.
Gooseneck light with table clip that can be fitted everywhere.
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Vdc, 1AGooseneck length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mmLamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x SBC, 12V, 5WDimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .490 x 44 x 55mm
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Vdc, 500mAClip opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mmGooseneck length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300mmLamp rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V, 5W
Item ref173.102
Item ref173.105
FLIGHTCASES | CD CASES | GOOSENECK LAMPS