Post on 18-Sep-2019
2013
Product Solutions Guide
P r o t e c t O r g a n i z e C o n t r o l
2014
IndexProduct Page
General Purpose Fuses 3-5
Midget/Electronic 6
Fuse Holders & Blocks 6-7-8
Fuse Reducers/Puller/Clamps 8
Special Purpose Fuses 9
Telecom/Capacitor fuses 10
Semiconductor Fuses 11-12
Solar Product 15
High Voltage & Accessories 16-17
Panel Building Products 18-21
Automation Products 22
Maintenance Kits 23
Enclosures 24-27
KN
OW
LE
DG
E S
ER
VIC
E S
OL
UT
ION
S80
0-47
9-38
75
Our Partners
DRIESCHER
Sample part #: CCMR-15
The CCMR series POWR-PRO CC fuses are true dual element, time-delay fuses specifically engineered for space-saving motor branch cir-cuit protection. These fuses are recommendedfor motor circuits up to 40 HP and for generalpurpose circuits up to 60 amps.
• Voltage Rating: 600 VAC (contact factory for DC voltages)• Interrupting Rating: 300,000 AC amperes• Ampere Range: 2/10 - 60 amperes CC 2/10 - 30A CD 35 - 60A• Time Delay
CCMR Series Class CC/CD
CCMR replaces competitor’s: LPCC,ATDR
KLPC series POWR-PRO fuses pro-vide ideal overcurrent protection forservice switches, switchboard mainsand feeders, bolted pressure contactswitches, motor control centers, trans-formers, power circuit protection, andother applications requiring 200 - 6000ampere fuses.• Voltage Rating: 600 VAC / 480 VDC• Interrupting Rating: 300,000 AC / 20,000 DC amperes• Ampere Range: 200 - 6000 amperes• Time Delay
KLPC Series CLASS L
Sample part #: KLPC-1200
KLPC replaces competitor’s: KRPC,A4BQ
Littelfuse LLSRK_ID series fuse is themost advanced Class RK1 fuse available today providing unparalleled performance and protection to modern circuits. The patented Indicator technology provides instant identification of a blown fuse greatly enhancing system uptime, while the preci-sion formed short circuit elements virtually eliminate damage to components from unexpected electrical faults.
• Voltage Rating: 600 VAC / 300 VDC• Interrupting Rating: 200,000 AC amperes 300,000 AC amperes (Littelfuse self certified) 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay
LLSRK_ID Series CLASS RK1
Sample part #: LLSRK-100ID
LLSRK_ID replaces competitor’s: LPSRK, A6DR
Littelfuse LLNRK and LLSRKseries POWR-PRO fuses providesuperior overload and short circuit pro-tection for general purpose(service entrance, main, feeder, andbranch) circuits and for circuits with highinrush currents (motors, transformers,and solenoids).
• Voltage Rating: 250 VAC / 125 VDC (LLNRK) 600 VAC / 300 VDC (LLSRK)• Interrupting Rating: 300,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay
LLNRK / LLSRK Series CLASS RK1
Sample part #: LLNRK-100
LLNRK replaces competitor’s: LPNRK, A2DRLLSRK replaces competitor’s: LPSRK, A6DR
The Littelfuse JTD Indicator fuseprovides visual indication when thefuse has blown and maximum pro-tection in a compact package. Idealfor use with motors, transformers,solenoids, and general purpose cir-cuits with limited space.
• Voltage Rating: 600 VAC (contact factory for DC voltages)• Interrupting Rating: 300,000 AC amperes (Littelfuse self-certified)• Ampere Range: 8/10 - 600 amperes• Time Delay
JTD_ID Series CLASS J
Sample part #: JTD-100ID
JTD_ID replaces competitor’s: LPJ, AJT
LDC Series CLASS L
LDC series fuses are the first UL Listed 600volts AC and DC Class L fuse. They are recom-mended for UPS protection, DC distribution, DC variable speed drives, crane rail circuits and other large DC equipment, mass transit systems, and general purpose main, feeder, and branch circuits.
• Voltage Rating: 600 VAC / 600 VDC• Interrupting Rating: 200,000 AC / 50,000 DC amperes• Ampere Range: 150 - 2000 amperes• Time Delay
Sample part #: LDC-1200
General Purpose Fuses
3
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:Approvals:
Approvals:
Approvals:
Approvals:Approvals:
KLLU Series CLASS L
The general purpose KLLU Class L fuse pro-vides high quality protection at a slightly lowercost than the POWR-PRO KLPC version. Thesefuses are recommended for use in serviceswitches, switchboard mains and feeders, boltedpressure contact switches, motor control centermains, and large motor branch circuits.
• Voltage Rating: 600 VAC (contact factory for DC voltages)• Interrupting Rating: 200,000 AC amperes• Ampere Range: 601 - 4000 amperes• Time Delay
Sample part #: KLLU-1000
Three types of Class CC fuses provide protec-tion for a variety of components. The KLDR series fuses are designed to withstand the high magnetizing inrush of transformers. The KLKR series fuses are used to protect equip-ment requiring fast response to faults. (Refer to the POWR-PRO section for information on the CCMR series motor protection fuses).
• Voltage Rating: 600 VAC / 300 VDC• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 30 amperes• Time Delay: • Fast Acting: KLKR series KLDR series
KLDR/KLKR Series CLASS CC
Sample part #: KLKR-10
KLNR/KLSR Series CLASS RK1
The KLNR/KLSR series Class RK1 fuses are extremely current limiting and provide fast-acting overload and short-circuit protection. They are recommended for use with resis-tance heaters, lighting circuits, and other non-inductive loads up to 600 amperes.
• Voltage Rating: 250 VAC / 125 VDC (KLNR) 600 VAC (KLSR) (contact factory for DC voltages)• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1 - 600 amperes• Fast Acting
Sample part #: KLNR-200
KLNR replaces competitor’s: KTNR, A2KRKLSR replaces competitor’s: KTSR, A6KR
The Littelfuse FLNR_ID and FLSR_IDIndicator fuses provide visual indicationwhen the fuse has blown, reducing downtime and increasing safety. Ideal for usewith all general-purpose circuits, motors,transformers, solenoids, fluorescent light-ing, and all system components with highinrush currents.
• Voltage Rating: 250 VAC / 250 VDC (FLNR_ID) 600 VAC / 300 VDC (FLSR_ID)• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1/10 - 600 amperes• Time Delay
FLNR_ID/FLSR_ID Series CLASS RK5
Sample part #: FLSR-200ID
FLNR_ID replaces competitor’s: FRNR, TRNRFLSR_ID replaces competitor’s: FRSR, TRS
JLS Series CLASS J JLS series fuses provide space-saving,fast-acting protection for non-inductiveloads. The fuse characteristics are similarto the KLNR/KLSR series RK1 fuses, butare much smaller in size. They are alsorecommended for use with resistanceheaters, lighting circuits, and other non-inductive loads up to 600 amperes.
• Voltage Rating: 600 VAC• Interrupting Rating: 200,000 amperes• Ampere Range: 1 - 600 amperes• Fast Acting
Sample part #: JLS-200
JLS replaces competitor’s: JKS, A4J
JLLN/JLLS POWR-T Series CLASS TPOWR-GARD Products space savingPOWR-T fuses provide fast-actingoverload and short circuit protectionfor non-inductive circuits. These fusesare recommended to protect individualelectric services and meters, main switch meter stacks, and similar equipment.
• Voltage Rating: 300 VAC / 125 VDC (110 - 1200 amps) (JLLN) 600 VAC / 300 VDC* (JLLS)• Interrupting Rating: 200,000 AC / 20,000 DC amperes• Ampere Range: 1 - 1200 amperes• Fast Acting
4
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Approvals:
Approvals:
Approvals:
Approvals:
Approvals:
Sample part #: JLLN-100 JLLS-035
General Purpose Fuses
KLLU replaces competitor’s: KLU, A4BTKLKR replaces competitor’s: ATMR, HCLRKLDR replaces competitor’s: ATQR, HCTR
JLLN replaces competitor’s: A3T, TJNJLLS replaces competitor’s: A6T, TJS
NLN/NLS Series CLASS K5
NLN and NLS series fuses provide low cost protection for general purpose feeder and branch circuits.
• Voltage Rating:
250 VAC / 250 VDC (NLN)600 VAC (contact factory for DC voltages (NLS)• Interrupting Rating:
50,000 AC amperes (contact factory for DC amps)• Ampere Range:
1 - 600 amperes• One-Time Fuse
Sample part #: NLS-125
NLN replaces competitor’s: NON, OTNLS replaces competitor’s: NOS, OTS
The unique design of Littelfuse’s compactSLC series Class G fuses provide size rejec-tion to insure correct fuse replacement. These low-cost, space-saving fuses are recom-mended for use with both non-inductive and inductive loads with limited inrush currents.
• Voltage Rating:
600 VAC (1/2–20A), 480 VAC (25–60A)• Interrupting Rating:
100,000 AC amperes• Ampere Range:
1/2 - 60 amperes• Medium Time Delay
SLC Series CLASS G
Sample part #: SLC-10
PLUG Fuses Normal Blow & “P” Rated
The Littelfuse IDSR Indicator fuse wasdesigned specifically for DC applications.It offers 600 volt AC/DC ratingalong with visual blown fuse indication.Ideal for use with general purposecircuits, motors, transformers, solenoids,fluorescent lighting, and all system components with high inrush currents.
• Voltage Rating:
600 VAC / 600 VDC
• Interrupting Rating:
300,000 AC / 20,000 DC amperes
• Ampere Range:
1/10 - 600 amperes
• Time Delay
IDSR Indicator™ Series CLASS RK5
Sample part #: IDSR-125
IDSR replaces competitor’s: FRSR, TRS
SLC replaces competitor’s: SC, AG
GP – For general purpose circuit protection.
TD – Medium time-delayfuses. Recommended for generalpurpose branch-circuit protection.• Voltage Rating:
125 VAC
• Ampere Range:
15, 20, 25, 30 amperes• Time Delay or Medium Time Delay
General Purpose Fuses
‘Red Spot’ fuse holders are fully shrouded fuse holder designed to accept standard Class C or CA type fuses. The fuses bolt into the handle, which serves as an insertion and withdrawl tool, as well as covering all live parts when the fuse is being installed or withdrawn.
• Voltage Rating:
600VAC• Interrupting Rating:
200kA @ 600VAC• Ampere Range:
2 - 600 amperes
Sample part #: CIA-015
Form II class C, CA/CB Series fuses are a British dimension current limiting HRC fuse with very compact dimensions. They are used for a wide variety of control applications where excellent current limitation and compact dimensions are required. 'C' Series fuses can be used on any 600Vac or less circuit.
• Voltage Rating:
600VAC • Ratings:
20,30,60,100,200,400A• Connection:
Front,Front/Back, Back
5
Form II Class C, CA/CB Red Spot Fuse Holders
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Approvals:
Approvals:
Approvals:
Approvals:
Sample part #: GP-15, TD-15
Littelfuse offers several series of midget fuses that providesupplementary protection in such applications as: controlcircuits, street lighting, computers, DC circuits, solenoids,small motors, and transformers. Available in fast-actingand time-delay versions in a variety of voltage, ampere,and interrupting ratings.
• Voltage Rating: 32 - 1000 VAC
• Interrupting Rating: 10,000 - 200,000 AC amperes(10,000 DC amp fuse available)
• Ampere Range: 1/10 - 30 amperes
• Time Delay: FLA, FLM, FLQ, KLQ
• Fast Acting: BLF, BLN, BLS, FLU, KLK, KLKD
BLF series250 VAC (1/2 - 15 amps)125 VAC (20 - 30 amps)1/2 - 30 amps10,000 AIRFast Acting
BLN series250 VAC1 - 30 amps10,000 AIRFast Acting
BLS series600 VAC (2/10 - 5 amps)250 VAC (6 - 10 amps)2/10 - 10 amps10,000 AIRFast Acting
FLA series125 VAC1/10 - 30 amps10,000 AIRTime Delay
FLM series250 VAC1/10 - 30 amps10,000 AIRTime Delay
FLQ series500 VAC1/10 - 30 amps10,000 AIRTime Delay
FLU series1000 VAC/DC44/100 - 11 amps44/100A: 10,000 AIR11A: 20,000 AIR
KLK series600 VAC1/10 - 30 amps200,000* AIRFast Acting
KLKD series600 VAC/VDC1/10 - 30 amps100,000 AC / 10,000 DC AIRFast Acting
KLQ series600 VAC1 - 6 amps10,000 AIR
Midget Fuses
Replaces competitor’s:LF CompetitorBLF BAF, OTMBLN BAN, OTMBLS BBSFLA FNA, GFNFLM FNM, TRMFLQ FNQ, ATQFLU DMMKLK KTK, ATMKLKD KLMKLQ KTQ
Sample part #: KLK-15
Midget - Electronic
Electronic FusesLittelfuse supplies numerous Slo-Blo®, fast-acting, and indicating fuses, used in a variety of electrical, electronic, and communications equipment to provide superior protection.
Cartridge Type: 312, 313, 215, 216, 217, 218, 314, 326Axial Lead Type: 318, 315, 324, 325• Voltage Rating: 32 - 250 VAC• Interrupting Rating: 35 - 10,000 amperes• Ampere Range: 1/100 - 30 amperes• Slo-Blo®: 313, 315, 325, 326, 215, 218, • Fast Acting: 312, 318, 314, 324, 216, 217
• Indication: 313_ID, 2AG, 229.S
Selected Electronic Fuses:
For additional informationsee Littelfuse’s ElectronicDesigners Guide - EC101.
215 series (Type T)5x20mm SLO-BLO®250 VAC (.200 - 10 amps)
216 series (Type F)5x20mm Fast Acting250 VAC (.050 - 10 amps)
217 series (Type F)5x20mm Fast Acting250 VAC (.032 - 15 amps)
218 series (Type T)5x20mm SLO-BLO®250 VAC (.032 - 15 amps)
312/318 series3AG Fast Acting250 VAC (1/100 - 10 amps)32 VAC (12 - 35 amps)
313/315 series3AG SLO-BLO®250 VAC (1/100 - 8 amps)32 VAC (10 - 30 amps)
313 Indicating series3AG Indicating SLO-BLO®250 VAC (1/2 - 8 amps)32 VAC (10 amps)
314/324 series3AB Fast Acting250 VAC (1/8 - 20 amps)125 VAC (25 - 30 amps)
326/325 series3AB SLO-BLO®250 VAC (1/100 - 20 amps)125 VAC (25 - 30 amps)
Sample part number: 0313010.vxid Sample part number: 0218.400VXP
Fuse blocks are available for Class H/K5,Class R, Class J, Class T, Class G, ClassCC, Midget. Integral blown fuse indication.
• Voltage Rating: 250 & 600VAC• Ampere Range: 30 - 600A
Fuse Blocks Fuse Block CoversImproves safety to personnel by minimizingcontact with energized parts. Availablefor Class H/R, J, CD, CC, T and Midget style fuses up to 100 amps.
6
Fuse Holders & Blocks
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals: Approval:
Approvals:
Approvals:
Fuse Holders & Bloks
POWR-SAFE “Dead Front” HoldersLittelfuse POWR-SAFE holders provideoptimum protection to personnel.These DIN-Rail mountable holders areavailable in indicating and non-indicatingversions for Class CC, Midget,
Voltage Rating: 600VAC
Interupting Rating: 200kA
Amp Rating: 100A, 200A & 400Amp
Poles: 3 Pole only
Cover: Included. Clear lexan
Class J 100, 200 & 400Amp Blocks
Class J 30 & 60Amp Holders
Class J 30 & 60Amp holders provideoptimum protection to personnel.These DIN-Rail mountable holders areavailable in indicating and non-indicatingversions.
Semiconductor Fuse Blocks
LSCR001 & LSCR002 SeriesModular-designed Semiconductor fuse blocks are designed to accommodate a wide range of Semiconductor fuses, with a maximum diameter of 3”. This modular design greatly reduces inventory require-ments. They are sold in pairs.
1LS Series
Littelfuse’s 1LS series modular stylesemiconductor fuse blocks accomodatea wide range of semiconductorfuses. Blocks are provided in pairswith fuse mounting hardware.
Voltage: 600VACAmperage: 1-600A
POWR-BLOKS Global Distribution Blocks add safety and mounting versatility to our distribution block solutions. The Global Distribution Blocks are IP20 finger safe to reduce the risk of contact and eliminates the need for block or panel covers.
Features and Benefits
• Space saving design• Integrated touch-safe cover to increase safety• IP20 protection rating• Mounts to DIN rail or panels• Reliable brass connections for excellent continuity in a smaller design
GDB Distribution Block Finger Safe
POWR-BLOKS power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary power into sec-ondary circuits. Lx2xxx-DIN series offers integral DIN-Rail mount and an optional hinged safety cover
Voltage Rating: 600VAC
Material:Phenolic rated at 150°C and Thermoplastic rated at125°C (LD1400 and LS1300 series only)
Connector: Standard: Highly conductive aluminium, tin plated. Rated for cop-per and aluminium conductors.
Approvals:
POWR-BLOKS
Class CC & Midget
Voltage Rating: 600VAC
Amp Rating: 30A,
Poles: 1, 2, 3
Voltage Rating: 600VAC
Amp Rating: 30, 60A
Poles: 1, 2, 3
Voltage Rating: 600VAC
Amp Rating: 80 - 310A,
Poles: 1, 2, 3
Refer to LD or LFD in the Littelfuse Powr-Gard catalogue
LSCR001 - 600VAC for use up to 400AmpLSCR002 - 600VAC for use up to 800Amp
7For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Approvals:
Approvals:
Approvals:
Approvals:
Sample part #: Midget - LPSM001Z Class CC - LPSC0002ZID
Sample part #: Class J 30A 31284.000 Class J 60A 31920.000
Sample part #: Class J 100A 33306.000 Class J 2000 33307.000 Class J 400A 33308.000
With Indication
Sample part #: Class J 30A 31932.000 Class J 60A 31923.000
Panel Mounted Fuseholders
571 series / 572 Snap mountPanel mount fuseholders are availablefor Midget or Class CC fuses.
• Voltage Rating: 600 volts• Ampere Rating: 30 amperes
In-Line Watertight Fuseholders
LEB/LEC, LEX/LEY & LET series
Littelfuse’s 600 volt in-line watertightfuse holders are available in both break-away and non-breakaway styles, singleand double pole versions, allowing maxi-mum flexibility for any application.Designed for use with Class CC andMidget style fuses up to 30 amps. Singlepole solid neutral holders are also avail-able.
Fuse ReducersFuse reducers allow smaller size fusesto be installed in existing fuse clips.For use with 250 & 600V Class H/R and J class fuses.
Fuse PullersFor safe fuse installation and removal.Available in 3 sizes and ergonomicallydesigned for comfort.
POWR-JAW Clip Clamps
For improving contact between fuseand clips. Clip clamps minimize poorclip contact due to loss of spring force.
Fuse Types: Class CC & Midget
Voltage Rating: 600V (CSA/UL) )
1000VDC - Solar
Ampere Rating: 30A.
Poles 1, 2, 3
SCCR: Class CC - 200kA
Midget - 50kA with KLK fuse
Terminal Style: Box Connector
Wire size: 1 wire #18-#4 AWG or
2 wires #18-#6 AWG
Indicating & non-indicating versions available..
Class CC & Midget Fuse holder
Sample part # Class CC: 31298.000
Sample part # Midget: 31110.000
Sample part # Midget Non-Indicating: 31110.000
Sample part # Midget Indicating: 31130.000
LHFB001 Inline Fuse HolderThe Littelfuse LHFB waterproof inline fuse holder is ideal for harshenvironments. The easy to assemble one-piece molded thermoplasticbody is a bright green color for high visibility. The LHFB holder ac-cepts #12 to #18 gauge wire and features the voltage and amperage rating molded into the body, along with a wire strip gauge. Withstands solvents and vibration, for use with 1/4” x 1-1/4” fuses.
• Voltage Rating: 32V• Ampere: 30A
Fuse Holders - Reducers - Pullers - Clamps
Voltage Rating: 600VAC
Amp Rating: up to 30A,
Interupting Rating: 200kA( with Class CC fuse)
• Simple installation• Reduces inventory requirements• Silver brazed joints for maximum strength
We can supply panel mount fuse holders for 2AG, 3AG
&5x20mm fuses. refer to 345 series.
8
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Approvals:
Approvals:
Approval:
Approval:
Approvals:
Approval:
Sample part # 571-007
Sample part # LCC 5
Littelfuse Special Purpose fuses are designed for specialty applications. They provide protection to lighting systems, battery operated equip-ment, and service entrance conductors. Available in a wide range of voltage and ampere ratings to accomodate a variety of applications.
LGR series fusesFast-Acting300 VAC1/2 - 15 amps10,000 AIR
LMF series fusesTime-Delay300 VAC3/10 - 10 amps10,000 AIR
CBO/CCK/CCL series fusesFast-acting (CBO)Time Delay (CCK, CCL)32 VDC (CBO), 125 VDC (CCK, CCL)1 - 300 amps
Special Purpose Fuses
Automotive Fuses• Voltage Rating: 32V AC/DC
• Ampere Range: 1 - 500 amperes
• Slo-Blo®: MAXI™ (299 series), MEGA®, MIDI®
• Fast Acting: ATO® (257 series) MINI® (297 series)
MAXI 299 seriesSLO-BLO®32V AC/DC20 - 80 amps
MEGA seriesSLO-BLO® Bolt-On32V AC/DC60 - 500 amps
MIDI seriesSLO-BLO® Bolt-On32V AC/DC30 - 200 amps
ATO 257 seriesFast Acting32V AC/DC1 - 40 amps
MINI 297 seriesFast Acting32V AC/DC2 - 30 amps
Sample part number: MIN-25
Selected Automotive Fuses:
Daito fuses are frequently used in machine tools, CNC and robotic equipment, telecom-munications and equipment from Fanuc, Yaskawa, Toshiba and NEC. They are AC/DC rated fuses with an integral alarm contact that is closed on fuse operation, signalling that the fuse has operated. They are a unique size and cannot be interchanged with other fuse types.
Fuse Types: MP, SMP/SDP,GP,P3,P4,
P4H,P4L,SP3,SP4,HP
Voltage Rating: 60 -250VAC/DC
Ampere Rating: 0.32A - 15A
Interupting Rating: Up to 10kAIR
Approvals:
Daito fuses
7017240 - 6mm x 32mm 1000VAC/VDC
• 1000VAC/DC UL
• Ultra fast acting (FF)
• 0.315, 0.5, 0.8, 1, 1.6, 2A
• Use in test leads
• Designed for long life in severe condition
• Shock & Vibration tested to 30G series
The Littelfuse FLU series is designed specifi-cally for the protection of multimeters.The 1000 VAC/VDC rating also makes the FLU ideal for a variety of other applications
• Voltage Rating:
1000VAC• Interrupting Rating:
FLU.440 10kAFLU 011 20kA• Ampere Range:
FLU44 - 1AmpFLU11 - 15AmpSample part #: FLU44
replaces competitor’s: FSM, DMM
CNL/CNN series fusesFast-acting (CNL)Very fast-acting (CNN)32 VDC (CNL), 48 VDC (CNN)10 - 800 amps
Multimeter Fuses
Lighting fuses Forklift & Battery fuses
9
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Approvals:
DAITO
TFCF fuses are current limiting fuses designed for the unit fusing of 600v (orless) capacitors. They are threaded for M12 metric capacitor bushings, butmay be adapted to other thread patterns with the adapters shown below.
Voltage Rating: 600VACAmpere Rating: 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 125, 150, 175, 200A Interrupting Rating: 200kA Approval:
TFCF 600V Capacitor fuses
Telecomm Fuses
Specifically designed for use withTelecommunications circuits. LittelfuseTelecom products provide reliable protectionto sensitive DC power distributionsystems. The compact design andmultiple mounting configurations allowflexibility for the designer.
L17T series fuses170 VDC70 - 1200 amps100,000 amps I.R.
TLN series fuses170 VDC1 - 600 amps100,000 amps I.R.
TLS series fuses170 VDC1 - 125 amps100,000 amps I.R.
70 series alarm fuses125 VAC, 300 VDC100ma - 10 amps1000 amps I.R.
481 series alarm fuses125V AC/DC18/100 - 20 amps1000 amps I.R.
LTFD series disconnect switches60-145 VDC1 - 1200 amps
TCCF 2.4/4.8kV Capacitor fuses
TCCF fuses are current-limiting, partial range fuse designed for the individual unitfusing of three phase capacitors in metal enclosed equipments. They are non-indi-cating and non-disconnecting
Voltage Rating: 2.4kV: 100A &125A 4.8kV: 25A - 75AAmpere Rating: 25, 50,75,100,125 IR Rating: 50kA
• Direct stud-mounting on 1/2-13 capacitor studs eliminates seperate holder.
• replaces Westinghouse, GE and some McGraw fuses
• Adapters are available below to convert to other stud threads
SIBA Capacitor fuses
Siba capacitor fuses offer increased volt-age and amp ratings for larger capacitor applications. They feature ceramic bodies and higher interupting ratings. Imperial UNC thread pattern is standard. Metric styles also available.
Voltage Rating: 4.8kV, & 7.2kV, 15.5kVAmpere Rating: 6.3A - 200Amp Interrupting Rating: 63kA
Material - unplated free cutting brass
Thread patternsStud Receptacle P/N3/8-16unc M12 S38-R121/2-13unc M12 S13-R121/2-13unc M16 S13-R16M12 3/8-16unc S12-R38M12 1/2-13unc S12-R13M16 1/2-13unc S16-R13M10 M12 S10-R12
Metric/UNC Adapters
10
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Stud
Receptacle
Sample part # TFCF-125 Sample part # TCCF-125
Littelfuse Semiconductor fuses are very fast acting fuses designedspecifically for the protection of diodes, thyristors, triacs, and othersolid-state power semiconductor devices. These fuses are used inpower electronic applications including variable speed drives,power rectifiers, UPS systems, and DC power supplies. They canbe used wherever extremely fast-acting, current-limiting fuses areneeded to provide superior protection against the potentially damagingeffects of short circuit currents.
The extensive line of Littelfuse Semiconductor fuses includes thetraditional round body fuses, enhanced state-of-the-art round bodyfuses, and North American style square body fuses. Available ratingsrange from 150 to 1300 volts up to 6000 amps.
• Voltage Rating:150-1300 VAC, 150-1000VDC• Interrupting Rating:100,000-200,000 AC amperes• Ampere Range:1 - 6000 amperes
LA15QS SeriesVoltage Rating: 150V AC/DCInterrupting Rating: 100,000 amperesAmpere Range: 1 - 6000 amperes
LA30QS SeriesVoltage Rating: 300V AC/DCInterrupting Rating: 200,000 amperesAmpere Range: 35 - 4500 amperes
LA50QS SeriesVoltage Rating: 500V AC/DCInterrupting Rating: 200,000 amperesAmpere Range: 35 - 1200 amperes
LA60Q SeriesVoltage Rating: 600 VACInterrupting Rating: 200,000 amperesAmpere Range: 5 - 40 amperes
LA60X SeriesVoltage Rating: 600 VACInterrupting Rating: 100,000 amperesAmpere Range: 70 - 2000 amperes
LA70QS SeriesVoltage Rating: 700V AC/DCInterrupting Rating: 200,000 amperesAmpere Range: 35 - 800 amperes
LA70QS French Cylindrical SeriesVoltage Rating: 690 VAC/700 VDCInterrupting Rating: 200,000 amperesAmpere Range: 10 - 100 amperes
LA100P SeriesVoltage Rating: 1000 VAC/750 VDCInterrupting Rating: 100,000 amperesAmpere Range: 15 - 1000 amperes
LA120X SeriesVoltage Rating: 1200 VAC/1000 VDCInterrupting Rating: 100,000 amperesAmpere Range: 1/2 - 30 amperes
LA070URD SeriesVoltage Rating: 700V AC/DCInterrupting Rating: 200,000 amperesAmpere Range: 40 - 2500 amperes
LA130URD SeriesVoltage Rating: 700V AC/DCInterrupting Rating: 100,000 amperesAmpere Range: 40 - 2500 amperes
L15S SeriesVoltage Rating: 150V AC/DC (1-60A), 150 VAC(70-1000A), 100 VDC (70-1000A)Interrupting Rating: 200,000 amperesAmpere Range: 1 - 1000 amperes
L25S SeriesVoltage Rating: 250V AC/DC (1-200A), 250 VAC(225-800A), 200 VDC (225-800A)Interrupting Rating: 200,000 amperesAmpere Range: 1 - 800 amperes
L50S SeriesVoltage Rating: 500 VAC/450 VDCInterrupting Rating: 200,000 amperesAmpere Range: 10 - 1200 amperes
L60S SeriesVoltage Rating: 600 VACInterrupting Rating: 200,000 amperesAmpere Range: 1 - 800 amperes
KLC Series (for replacement only)Voltage Rating: 600 VACInterrupting Rating: 200,000 amperesAmpere Range: 1 - 800 amperes
L70S SeriesVoltage Rating: 700 VAC/650 VDCInterrupting Rating: 200,000 amperesAmpere Range: 10 - 1200 amperes
Sample part number: LA50QS250-4
Semiconductor Fuses
11
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:Approval:Approval:
British semiconductor fuses (BS88)
These fuses are British dimension, ultra fast acting types for the protection of semicon-ductor devices such as diodes, rectifiers, SCR's, thyristors, soft starts or inverters.
• High interrupting rating 100 kA
• Voltage rating AC 240 V – AC 700 V• Protection of Power Semiconductors
according to IEC 60269-4
• Complies with BS 88 Standard• with or without striker for microswitch
operation.
• Class aR 5 A – 900 A according to IEC 60269-4
These fuses are available in 6 different sizes. They can be fitted with or without built-in striker pin for fuse blown indication or operation of microswitches.
• Approval:
• Standard: IEC 60269-1 and -4
• DIN VDE 0636-23
• UL 248-13
• Class: gR/aR/gRL
• Current ratings: 125 mA – 200 A
• Size and voltage rating:
• 5 x 20 mm: AC 250 V
• 6.35 x 32 mm: AC 500 – 1000 V
• 10 x 38 mm: AC 600 – 1000 V
• 14 x 51 mm: AC 500/600V – 690/700 V
• 22 x 58 mm: AC 500/600 V – 690/700 V
• 27 x 60 mm: AC 660 V – 1000 V
• Fuse-Bases / Fuse-Clips and Accessories are available
European fuses are used in imported equipment, or in projects destined overseas. Eurofuses are available in two broad categories - bottle fuses and square body fuses. Both categories have many different types within the group. All Euro-pean fuses are current and energy limiting.
Operating classifications:
gL, gG, General purpose characteristic for distributionaM Back up characteristic for motor circuitsgR Ultrafast characteristic for semiconductor circuits.
Voltage Rating: 380 - 690VAmpere Rating: 2 - 750AInterrupting Rating: 100 - 120kASpeed: aR, gG, gR, gRLSizes: 00, 000, 1, 2, 3
Eurofuses Bottle and NH Metric Ferrule Fuses
Usually found in imported equipment. Available in the following characteristics;
F = Fast - overload and short circuit.M = medium - overload and short circuit.FF = Ultrafast - short circuit only.gL = General purpose-overload and short circuit.aM = Motor circuit - short circuit only.gR = Ultrafast-overload and short circuit.gRL= Branch rated & short circuit.
Voltage Rating: 250,380, 450 500, 600, 660, 690, 700, 1000VACAmpere Rating: 0.032A - 100ASpeed: aM, FF, F, gL, gR, TSizes: 5x20mm, 6x32mm, 8x32mm, 10x38mm, 14x51mm, 22x58mm
Approvals:
Not all Ferrule fuses carry the CSA or cRU. For additional information see Fusetek Specialty Catalogue or visit www.fusetek.com
Semiconductor Fuses
12For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
DIN 43625 fuses come in 5 case sizes - 000, 00, 1, 2, & 3. Within these case sizes - UR fuses come in two voltage ratings (700 & 1400Vac) and two fixing centers (80 and 110mm). These fuses can easily be fitted with a microswitch for remote annunciation, or may be used without this option.
Voltage Rating: 700 - 1400VACAmpere Rating: 50 - 3000AInterrupting Rating: 200kASizes: 1, 2, 3 and 4Standards:
Matching fuse bases available
URS Square Body Rectifier Fuses
IEC, CEStandards:
Cylindrical ultra-rapid
Solar
KLKD series
The SPF Solar Protection Fuse series has been specifically designed for the protec-tion of photovoltaic (PV) systems. This family of Midget style fuses (10 x 38 mm) can safely protect PV modules and conductors from reverse overcurrentconditions.
Voltage Rating: 1000 VDCAmperage Rating: 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30Max. Interrupting Rating: 20 kA
SPF series
The SPFJ series is the smallest 1000 VDC 70-450 A photovoltaic fuse available in the market. The SPFJ series is manufac-tured in Class J case sizes that allows for both fuse holder and busbar mounting configuration.
SPFJ series
Voltage Rating 1000 VDC600 VAC (125-450 A)Amperage Rating 70, 80, 90, 100, 125, 160, 200,250, 300, 350, 400, 450Interrupting Rating AC: 200 kAIC (125-450 A)DC: 70-200 A: 20 kAIC250-400 A: 10 kAIC450 A: 20 kAIC
Voltage Rating: 1000 VDCAmpere Ratings: 250, 300, 350 and 400 AInterrupting Rating: 10kAFuse Type: Fast-Acting
The SPFR series was designed to meet the growing needs of the solar industry with higher amperage and voltage requirements. It was developed specifically for solar applications ranging from 250 A to 400 A.
SPFR series
LPHV Series 1000VDC POWR-SAFE “Dead Front” Holders
The LPHV midget fuse holder series is a touch-safe design providing protection to personnel when installing and removing fuses. The compact fuse holder mounts quickly onto 35 mm din rail decreasing panel layout and assembly time. It has been self-certified to stringent Littelfuse standards for applications upwards of 1000VDC when used with the Lit-telfuse SPF or FLU midget fuse series.
Littelfuse POWR-SAFE Dead Front holders provide optimum protection to personnel for Class CC and Midget-Style fuses.
Voltage Rating: 600 VAC/DCAmpere Rating: 30 AInterrupting Rating: 200 kA (Class CC)100 kA (Midget)Terminal Type: Pressure plateWire Range: #8–#14 CUPoles: 1, 2, 3
Voltage Rating: 1000 VDCAmperage Rating: 30 amperesApproval: Self-certified with SPF & FLU fusesWire Range: #6 - #14 CU 75°CTerminal Type: Pressure PlatePoles: 1, 2, 3, 4
Fast-acting, high-interrupting capacity, current-limiting type fuse. Especially suited for DC control circuits and Solar string fusing.
• 600VAC/DC • CSA/UL Approved• 1 - 30A• 50kAIR DC
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
LPSM / LPSC
13For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
Approvals: Approvals:
Approvals:Approvals:
Approvals:
Approvals:
Sample part number: KLKD-15
Sample part number: SPFR-200
Sample part number: SPF030
Sample part number: SPFJ100
Sample part #: Midget - LPSM001Z Class CC - LPSC0002ZID
7017240 - 6mm x 32mm 1000VAC/VDC
• 1000VAC/DC UL
• Ultra fast acting (FF)
• 0.315, 0.5, 0.8, 1, 1.6, 2A
• Use in control circuits
• Designed for long life in severe conditions
• Shock & Vibration tested to 30G series
5019906 - 10mm x 38mm 1000VAC/DC
• 1000VAC/DC• 1, 2, 4, 6, 8, 10, 12, 16A• Max. I.R 38kA(L/R=1ms)• Ultra fast Acting• Standard Midget format• Use with 1000V rated holders and in
DMM’s
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
Overview of standard PV products Available
DIMENSIONS RATED VOLTAGE
RATED CURRENT
MM/SIZE V A
6.3 X 32 400VDC 6.3 - 20
10 X 38 1000VDC 0.5 - 20 **
14 X 51 1000VDC 10 - 25
10 X 51 1100VDC 6 - 20
10 X 85 1100VDC 2 - 20
NH1 1100VDC 50 - 200*
NH3 1100VDC 50 - 400
20 X 127 1500VDC 2 - 63
* UL pending** cUL rec.
PV NH1 2002820
• 1000VDC • Size NH1• 50 - 200A• Larger ampacities• Indicating /Non indicating versions
ALTERNATIVE POWER SOLUTIONS
LFJ1000 Solar Series
The LFJ1000 series fuse block is spe-cifically designed for the Littelfuse SPFJ 1000 V Solar Fuse. It meets UL electrical requirements, is available in multiple am-perages, and comes in a variety of fuse mounting and termination configurations; fuse clip to box lug, fuse stud to wire studand fuse clip to wire stud.
ALTERNATIVE POWER SOLUTIONS ALTERNATIVE POWER SOLUTIONS
5106304.DC 1000V 10mm x 38mm Fuse Holder
• 30A / 1000VDC• Din-Rail mountable• Non Indicating• 1 & 2 Pole• Gangable
Solar
14
Approval:
Approval:
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Approvals:
Approvals:Voltage Ratings: 1000 VDC
Ampere Ratings: 200, 400, 450 A
Flammability Rating: UL94 V-0
Termination Type: Box Lug or Stud Mount
Sample part # 7017240-00.315
Sample part # 2002820-200
Sample part # 5019906-10
The new AMBUS ® EasyLiner is a cost saving solution to building positive solar combiner assemblies. Fuse holders mount directly to busbar, insuring good connection, cool running and simplifies assembly up to 40 strings.
Advantages• Time and cost savings
• Fuse holders mount directly to the busbar, simplifying system
• Minimizes assembly and wiring
• System uses standard bus bars, terminals and supports
DC Isolator switches
Our Solar Isolator range has been specifically developed as a True DC load-break switch for DC applications up to 1000VDC
Voltage Rating: 1000 VDCCurrent: 16A - 400APoles: 2 - 8 polesMount : Panel, Enclosed, Base mount, Door interlockLockable: Yes
Approvals:
Available in either Lever Actuator, Rotary Actuator.
UL, IEC
The IMO Solar Cube is a PLC based controller for positioning & controlling solar tracking arrays. It has the flexibility to adapt to any installation and features integrated data logging capability for energy reporting.
• 3.5” Monochrome Touch Screen• 5 Pre-programmed function keys• Built-in sun positioning algorithm• 3D Compass input for accurate positioning. • Automatic location and clock updates with optional GPS module• MicroSD card for data logging• GPRS and Ethernet Remote Access options available• Single array & 4 array
Those are just some of the features of the SolarCube from IMO
Fuse holder part No.31572 - mounts on 20x5/10mm31570 - mounts on 30x5/10mm
Voltage Rating: 1000VDCAmpere Rating: 30AMax Current: 630A
ALTERNATIVE POWER SOLUTIONS
Solar
SolarCube
Easyliner
15
ALTERNATIVE POWER SOLUTIONS
ALTERNATIVE POWER SOLUTIONS
Approval:
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
HV DIN fuses.A complete line of DIN HV fuses are partial-range high voltage current-limiting fuses for use in distribution circuits from 2.3 - 38kV.
R-Rated Back-up Protection • 2.75kV - 2R – 24R• 5.5kV - 2R – 38R• 8.25kV - 2R – 36R
Voltage Rating: 7.2kV, 17.5kV, 25.8kV, 38kVRated Current: 400A & 600AFor Fuse sizes: 192mm, 292mm, 442mm,537mmOperator position:left or right
Medium Voltage FusesLittelfuse Medium Voltage fuses are available with conventional ferrule type, clip lock and bolt-in mounting configurations for flexibility in a variety of applications.
E-Rated General Purpose Fuses
• 2.75kV - 10E – 450E• 5.5kV - 10E – 600E• 8.25kV - 10E – 400E• 15.5kV - 10E – 300E• 25.8kV - 15E – 100E• 38.0kV - 3E – 80E
R rated Motor Fuses
E-Rated General Purpose Fuses“E-rated” fuses are general purpose fuses that protect againstboth low and high values of fault current. These fuses have timecur-rent characteristics designed to provide current limiting protectionfor power transformers, power centers, feeder circuits and unitsubstations.
E-Rated Potential Transformer FusesPotential Transformer (PT) fuses are current limiting fuses withhigh interrupting ratings designed for the protection of potentialtransformers.
R-Rated Back-Up Protection Fuses“R-rated” fuses are designed to protect against only high values offault currents and should be applied only as back-up protection.They provide required short-circuit protection for medium voltagemotors, motor controllers, and associated circuitry. However, theymust be used in series with other devices, such as motor overloadrelays, to achieve both overload and short circuit protection.
R rated fuses are current and energy limiting fuses intended for the backup protection of medium volt-age motor control. They are nonventing. They have integral striker/indicators and have standardized dimensions compatible with today’s 5.5kV motor control gear. They are fully interchangeable with other manufacturers’ fuses of the same type and rating.
PT series fuses are current limiting, non-indicating, partial range HRC fuses available in a variety of voltage, amperage and interrupting ratings. FC & NPT series are North American dimensioned PT fuses and provide equals to Westinghouse and CGE. BPT series are Brit-ish dimensioned PT fuses and offer equals to GEC, Brush, CCL, and EMP.
North American Dims
Fuse Diameter: 13/16”, 1”, 1-9/16” & 2”
Voltage Rating: 625VAC - 25.8kV
Ampere Rating: 0.5E - 25E
Interupting Rating: 32kA - 40kA
PT FUSES
• 3/7.2kV - 6.3 - 500A• 6/12kV - 6.3 -315A• 10/17.5kV - 6.3 - 400A• 20/27.6kV - 6.3 - 125A• 20/36kV - 6.3 – 200A• 38.5kV - 6.3 - 63A
Capacitor fuses are current-limiting, partial range fuses designed for the individual unit fusing of three phase capacitors in metal enclosed equipment. They are non-indicating and non-disconnecting.
Voltage Rating: 4.8kV: 25A - 75A 2.4kV: 100A -125A
Ampere Rating: 25, 50, 75, 100, 125AInterrupting Rating: 50kA m.b.c.: 200% of rating
Sample part number: TCCF-050
Other Capacitor fuses available from7.2kV,12kV, 13.8kV, 17.5kV & 25.8kV
Note: Add "B" suffix for M12 Boss at one end &1/2-13 boss at other end.
Capacitor fuses
load-break switches & Grounding switches
LDTP Series
Available with or without Auxiliary contacts for control and signalization
DEP Series of grounding switches (3pole)
Max voltage: 7.2kV, 17.5kV, 25.8kV, 38kVShort time Current: 25kA & 38.1kAOperator position:left or right
Available with or without Auxiliary contacts for control and signalization
High Voltage
16
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Sample part # 15E1C8.25
Sample part # MVR5/09R-DI
Sample part # FC467-1E
High Voltage Accessories
HV Microswitch 3100110
KF22-12 HV Indicator
HV Bases
Fuse Clips
EPOXY Insulators
We carry a range of epoxy resin insulators from 7.2kV to 38kV. Tapped brass inserts can accomodate a wide range ofequipment.
Never have to open a live HV cabinet again to check for voltage!. Bolt these line indicators onto any convenient live part and the high brightness LED cluster will flash to indicate presence of voltage.
Rated for 2.5kV - 38kV
Need more than visual indication? Our remote mount microswitch is good for all systems up to 38kV. The insulated Bowden cable is actuated by the fuse striker which then actuates the microswitch at the other end. Includes mounting bracket at both ends.
Medium voltage bases
Fusetek can supply single or 3 pole bases for most of the medium voltage fuses we supply.
Delle fuses are now obsolete, but there is a large installed base of fuses that need replacing. Our adapter kits replace the existing Delle live parts and convert the Delle fixing centers to accept a modern, easily obtainable DIN HV fuse.
• Direct bolt-on replacement.• Upgrades to modern DIN fuses.• High pressure clips, hardware and conversion plates
We carry Fuse Clips to fit all our HV fuses.
Size: 1” to 3” Reinforced spring clipSize: 45mm Spring clip 45mm Spring clip with hot stick loopAmp Rating: 60A, 200A, 400A, 600A, 1200A
Always in stock
Rated Voltage: 7.2 - 38kV
17
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Part Rated Voltage
DWA-07A 7.2kV
DWA-15A 17.5kV
DWA-20A 25.8kV
DWA-30A 38kV
DELLE Adapter Kits
T1 & T1E Series Duct
• 4 Styles of Duct• 35 duct sizes• 40+ components & Accessories• No cover charge. Each length comes with cover.• 2 meter length invoiced at 6 feet. Thats an extra 9% of duct free!• Available in white, grey, blue and black
Cable mounts that STICK!
Part Number Pack Qty*ICM-75 100
ICM-100 100
CL Wire Retainers
Retains wires during installation. Provides additional strain relief of fingers. Eliminates bulging against sidewall.
Available in light grey or black. IP-65 Rating
Dinosaur Flexible Duct
Dinosaur Duct is a unique product of-fering from IBOCO that is a flexible, resilient and efficient harnessing solution to your bundling needs. For wiring to cabinet doors, from control panels and for electronic equipment.
Cable Ties & Stickies
RoHS
I-Flex liquid-tight non metallic conduit
Spiralite Wrap & Braiding• Available in 4 sizes.
• Natural / White
• Polyethylene Natural (P)
• Polyethylene self extinguising (PA)
• Braided Sleeving available in 5 sizes.
IBOCO®'s straight and right angle (90º) liquid-tight non-metallic con-nectors are designed to fit with the company's line of flexible liquid-tight PVC tubing to ensure leak-proof integrity on motors, processing equipment, pumps, etc
• A liquid-tight environmental seal• Quick re-entry for cable repair or rerouting• recognition• certified• IP 65-rated for watertight applications
Panel Building Products
Approvals: Pending
• 4 pole to 54 poles• Transparent Cover• Optional lock• Mount any standard DIN rail device• IP65 / NEMA 4
IBOCO Enclosures are an architecturally appealing enclosure designed for use as instrumentation housings, electrical junction boxes, terminal wiring boxes and as hous-ings for electrical controls. The integral DIN rail makes mounting components a snap.
• MATERIAL: 6/6 Nylon• COLOR: NATURAL - BLACK
Length: 4.1” - 28”Tensile Strength(lbs):18, 40, 50, 120Max. Bundle Dia.: 22 - 203mm
ICB Enclosures
18
Unibox Enclosures
• IP65• Manufactured in polycarbonate• Plain side walls• Colour RAL7035 v- light gray• Pre moulded fixing points in base• 14 sizes• Back plate or DIN rail mount options.
Uniboxes are ideal for housing electronic and electro-mechanical components as well as terminal blocks and industrial equipment.
Approvals:Approvals:
Approvals:
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Busbar System
LEDTEC 22mm Pilot LightsThe last pilot light you will ever replace. 100,000 hours, super bright, power saving and immune to heat and vibration.
Voltage rating: 12vac/dc,24vac/dc, 48vac/dc, 110/120vac, 110/120vdc, 230VacColours: Red, Green, Amber, Blue, White
Sample Part Number: LEDTECR110/120Vac
• Very bright Multi Chip LED bulb • Standard 22mm format• Direct wire to integral rear terminals • Shock resistant• 1 piece design, - one part number • Oil and dust tight• IP65 • 20% voltage tolerance
BA9S LED’s are high brightness LED bulbs with industry standard BA9S bayonet bases. They will fit into any standard 22mm or 30mm pilot light that accepts BA9S bulbs. Their solid state design and long life makes incandescent bulbs a thing of the past.
LED BA9s are available in industry standard colors and voltage ratings and allows LED upgrade from the front of the panel without having to open the door.
Going from 30mm to 22mm takes only a fewseconds with the BCR-AX adapter ring.
• Steel plated backing ring with anti-rotation notch• Fits panel thickness up to 14 gauge• No tools required• Available in black plastic.
BCR-AX Adapter ring BA9S LED’s
120Vac/dc
LEDTEC Series
LEDTEC
R=RedG=GreenA= AmberB=BlueW=White
12Vdc24Vac/dc48Vac/dc110Vac/dc230Vac/dc
Catalogue number example
R
BA9SLED Series
BA9SLED
R=RedG=GreenA= AmberB=BlueW=White
6Vac/dc12Vac/dc24Vac/dc120Vac/dc220Vac/dc
Catalogue number example
R120
Their current limiting design and high interrupt/voltage ratings make them vastly superior to residential or ‘push-to-reset’ MCBs.
JTECUL
JTEC489
E243696
JTEC Accessories
• Auxiliary Contacts
• Shunt trip
• Neutral pole
• Undervoltage release
• Safety lockout device
• Busbar
• Busbar connector terminal.
• Busbar cut end-cap.
• Front Mount Panel Adapter
• Panel mount adapter clip.
Panel Building Products
Voltage Rating: 600VAC (N.A.) 690VAC (IEC)Amp Rating: Busbar dependant 150 - 1800A in 7 sizes
SCCR rating: Unprotected - 18-30kA
MCB protected - 25-65kA
Fuse protected - 100Ka
Touch Protection: IP20
The Wohner 60mm system is a modu-lar busbar system that allows an un-precedented degree of design flexibility. The 60mm busbar centers allow large ampacities to be distributed in a very compact space while maintaining high short circuit current ratings (SCCRs).
JTECULVoltage Rating: 277/480VACAmperage Rating: 0.5 - 63ATrip Curve: B, C, DPoles: 1, 2, 3
JTEC489Voltage Rating: 277/480VACAmperage Rating: 0.5 - 63ATrip Curve: B, C, D & KPoles: 1, 2, 3Note: 35-63A 240VAC
19
Approval:
Approval:
Thermal/Magnetic Circuit Breakers
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
• 10A - 1200A AC3 / 4kW - 680kW• DIN-rail mounting up to AC3 74A• Coils: 24, 120, 230, 240, 575V• 50/60Hz• DC coils available• Miniature breaker available. Refer to MB series
MCOR Series Overload Relay (thermal)
Temperature compensatedTrip and alarm contacts
Amp Range: 0.12 - 74A
MC Series
StartersMU Manual Series
• Amp Range: 0.16 - 25A• Overload protection• Short circuit protection• Overload built in to start
Accessories - Aux. Contacts, molded enclosure(IP55) Locking bracket, Mushroom stop button
DOL enclosed Magnetic Starter
• up to 7.5kW• IP65• Start Stop buttons• Pre-wired to accept overload
DOL Type: DOL_10 & DOL_18Standard coils: Same as MC seriesRatings AC3 /400V: 10A(DOL_10) 18A(DOL_18)
69 Series Isolators 600VAC
• 3 and 4 pole
• Load break 20 - 125A
• Red/yellow or black handles
• 3 pad lock positions
• Lightweight ext. shafts 100-400mm
• Side mount auxiliary contacts
PE69 - IP65 enclosedLB69 - Base mount door interlockPM69 - Front panel mountDM69 - Direct handle base mount
Industrial Power Relays
IMO offers a comprehensive Industrial power relay line.
2PCO and 3PCO Voltage Rating: 12, 24, 110 &230VACRated current: 10AMax. Switching: 250AC/30VDC
3PCO & 4PCO Voltage Rating: 12, 24, 110 &230VAC, 12, 24, 48, 110VDC Rated current: 5A (4PCO) 7A Amp (2CPO & 3CPO) 2PCO, Max. Switching: 250AC/24DC
HY series - Miniature General purpose
RS series - General purpose
TimersIMO's comprehensive range of 22.5mm DIN Rail Timers and Panel/plug-in timers delivers up-to-the-minute technology. Ultra compact design makes installation easy, even in the tightest of panels.
• 48 DIN panel mount/plug in range
• 22.5mm DIN rail mount range
• On delay
• Off/true off delay
• Recycling
• Star delta
• Multifunction
• 12 - 240VAC/DC options
Sockets
Popular Sockets
Socket Part Relay Rated VAC Pins Rated current
SRR8 300 8 15A (per pole)
SRR11 300 11 15A (per pole)
SRN2-S 300 12 12A (per pole)
SRSI 250VAC 6A (per pole)
TA8 Series - Plugin TD Series - DIN Rail mount
For technical information on any of the products in this short form cataloguePlease visit www.fusetek.com
Contactors & Overloads
For the complete line of Power relays and subminiature relays from IMOPlease visit www.fusetek.com and click on IMO
Panel Building Products
IMO offers a comprehensive line of sockets. They are available in panel mount or DIN Rail Mount
20
Approvals:
Approvals:
Approval:
Approvals:
Approvals:
Panel Building Products
Pilot devices & Push buttons and Cam switches
A full line of
• Push Buttons
• Emergency stop
• Cam switches
• Key operated rotary switches
• Illuminated push buttons
• Illuminated Operators
• Double push buttons
Contact blocks and lamp holders
• Label holder, legend plates, actuator caps
• 22mm
QB Photo-Electric SensorsThis miniature block sensor with diffuse, background suppression, retro reflective or through-beam capability is ideal for a wide range of industrial applications where space is at a premium.
• Thru Beam.
• Diffuse (with Background Suppression).
• Reflective photo-electric sensors.
• Simple push to teach with a variety of light sources
(Laser, Infra-Red, Visible Red).
• Light ON/Dark ON selectable.
Proximity Switches
• Capacitive & Inductive• Wide operating voltage 20-264VAC 50/60Hz• LED operation indicator• Shielded and unshielded models• IP67 nickel-plated brass housing• m8, m12, m18, m30• m12 plug or integral cable
IMO Limit Switches and safety limit switches are being installed and used daily in every type of industrial machinery, in every type of weather condition and in many different industry sectors, including Wood, Metal, Plastic, Automotive, Packaging and Lifting.
Compact Heavy Duty Limit Switches FM/FR/FZ/FXStandard Heavy Duty Limit Switches FD/FP/FL
Rope Operated Stop Switches FDRope operated safety switches for the pro-tection of exposed machinery.
• Lockout mechanism isolates safety
contacts until manually reset
• 12 and 35 meter rope length models
• Indicator of correct rope tension
• Fail-safe in the event of slack or broken wire rope
• Heavy duty die-cast metal alloy housing
• Single and triple conduit entry models
• IP66
Limit Switches & Safety Limit switches
• 10A 500VAC/600VDC rated
• Double-break contacts with electrically separate NO
and NC circuits
• Wide range of actuators
• Single and triple cable entry models
• Removable contact block for ease of wiring
• Turret head position rotatable in 90 degree incre-
ments
• Metal or plastic housing options
• IP66 according
Features common to both Standard and Heavy duty
Micro Switches MK SeriesGeneral purpose microswitches for heavier duty applications.
• High precision snap action mechanism
• 16A 250V AC resistive rating (Ith)
• Wide range of actuator styles
• Screw terminals with self lifting plate
• 10 million mechanical operation cycles
• Protection degree IP20, IP40 or IP65
• Versions with positive opening
• Mechanically interchangeable with previous
• products (see cross reference section)
IMO terminals are made of carefully selected standard materials. Insulating materials, clamping metals and conducting metals are subjected to strict quality control as required by stringent international standards.
DIN Rail Terminals
• 2.5mm to 240mm
• polyamide 6.6 material
• -40c to +100C
• screw and screwless option
• 8 colour options
21For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
DPS Power Supplies
• High efficiency
• Short circuit protection
• internal input filtering
• PFC function available
• Parallel function available
IMO's DPS range of AC/DC Din Rail mountable power supplies have been designed especially for the Control & Automation Market. Offering the benefits of slim lines, universal input, AC/DC operation and the security of a 3 year warranty.
IMO's i3 line of controller offers a unique solution since it is both a PLC and HMI combined in one device. It is also, small, very powerful and has many unique con-nectivity features. One such feature is the GRPS modem option, which is ideal for applications where the controller needs to be accessed remotely.
Available units• i3A - Mono 128 x 64• i3B - Mono 160x128 touch screen• i3C - Colour 320 x 240 touch screen• i3C - Mini colour 320x240 touch screen• i3D - Colour 640x480 touch screen• i3H - Graphic based 800x600 touch screen• All units come with free software and updates
i3 Controllers
iSmart RelaysIntelligent relays for precise controls
iSmart is a tiny intelligent relay / PLC hav-ing a 44 I/O point system that uses ladder graphic and FBD programs for applications in automation systems. Ismart can expand up to 3 groups of 4-input-4-outputs modules.
Multiple out putsMax 200 ladder step instructionMany built-in application instructions• Timer• Counter• Analog comparison• Upper and lower differentiation• PMW function• Datalink function• Remote I/O• HMI function
iDrive AC variable speed Drive
Low cost general purpose micro inverter
• Integrated EMC filter• Basic & Advanced set-up parameters• DIN rail mounting (IP20 models only)• V/F and sensorless vector operating modes• 8 preset frequencies• PID control, with ‘sleep’ operation• DC braking• Thermostatic cooling fan• PNP or NPN operation• Remote keypad option• PC and PDA set-up / test software
1Ø, 110V / 50~60Hz, 0.2~0.75kW (¼~1HP)*1Ø, 230V / 50~60Hz, 0.2~2.2kW (¼~3HP)
Single phase
Universal input voltage range:85V - 265VACStandard output:24VDCAvailable versions:5V, 12V and 48VDC
3 Phase: 0.37-710kW (0.5-950HP)Jaguar VXG High performance Drive
• Integrated EMC Filter (EN61800-3 2004 cat C3)
• V/F, Torque Vector and closed loop control
• 200% starting torque between 0.3-5Hz
• Improved open-loop low-speed stability
• Safety input: digital input to enable/disable the IGBT devices of the inverter output stage
• Mechanical brake control output - torque generated
• PID thermistor input
• Encoder feedback (closed-loop) and shaft synchronizing options
• Internal brake chopper up to 22kW (30-110kW upon request)
With an ultra-fast CPU its reaction to sudden load changes response time is unsurpassed, and with up to 300% torque on tap the VXG has the power to drive even the most demanding of applications with ease whilst keeping cool and in control with its extensive parameter set and communication options.
Automation
@ 480VAC
22For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
MTCE-LEDTEC22MM Pilot Lights
Description Colour Qty Ea.
LEDTEC 110/120Vac R, W, B, G, A 5LEDTEC 24VAC/DC R, W, B, G, A 5BCR-AX 30mm - 22mm Adapter ring 5R=RED, W=White, B=Blue, G=Green, A=Amber
P/N MTCE-CC
Class CC
Description Fuse Amps QtyEa.
CCMR 600Vac Time Delay 0.5, 1, 3, 5, 10, 15, 20,30A 5KLKR 600Vac Fast Acting 5, 10, 15, 20, 30A 5MFP Fuse Puller 3/16” - 1/2” Dia. 1Free Fuse Puller included in Kit.
P/N -MTCE-J Time delay
Class J T/D
Description Fuse Amps QtyEa.
JTD-id 600Vac T/D10, 15, 20, 30, 40, 50,60A 580, 100A 3
LRUJ63 Fuse Reducer 600Vac Class J 60-30A 3LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1
P/N - MTCE-R600 Time DelayClass RK5 Description Fuse Amps Qty
Ea.FLSR-id 600Vac T/D 10, 15, 20, 30, 60, 100A 5LRU-663R Fuse reducer 600V Class R 60-0Amp 1LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1
P/N - MTCE-R250 Time TelayClass RK5 Description Fuse Amps Qty
Ea.FLNR 250Vac T/D 5, 10, 15, 20, 25, 30A 5FLNR-id 250Vac T/D 40, 50, 60A 5FLNR-100id 250Vac T/D 100A 3LRU-263R Fuse Reducer 250Vac Class R 60-0Amp 1LPFP Fuse Puller 9/16” - 1-9/32” Dia. 1* 5 - 30Amp are NON Indicating.
P/N - MTCE-BA9S BA9S Description Colour Qty
Ea.BA9SLED 120Vac/dc R, G, A 10BA9SLED 120Vac/dc W, B 5BA9SLED 24Vac/dc R, G, A 10BA9SLED 24Vac/dc W, B 5R=RED, W=White, B=Blue, G=Green, A=Amber
P/N - MTCE-GLASS
1/4 X 1-1/4” Description Fuse Amps Qty Ea.
312 (Glass) 250Vac Fast Acting 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 8, 10A 5
314 (Ceramic) 250Vac Fast Acting 15, 20, 30A 5
313 (Glass) 250Vac Slo-Blo 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6.25, 8A 5
326 (Glass) 250Vac Slo-Blo 10, 15, 20, 25, 30A 5
5 x 20mm
217 (Glass) 250Vac Fast Acting 0.25, 0.5, 1, 1.6, 2, 2.5, 3.15, 4, 5, 6.3, 8, 10A 5
218 (Glass) 250Vac Slo-Blo 0.5, 1, 2, 3.15, 4, 5, 6.3, 10A 5
Fuse Holders345-3LF8 Straight 1/4” Nema Q.C 3AB Panel Mount 250V / 20A 5
150-079 19” inline fuse holder for 1/4” x 1.25” 32 V/ 20A 2
150-274 1P,10A/32V for 5x20mm 2
354-901GY 1P, 30A/300V 1/4”Nema for 1/4”x1.1/4” 5
097023 Fuse Puller 5x20mm, 1/4 - 1-1/4” & Auto fuse 1
Free Fuse Puller included in Kit
All maintenance kits can be modified to suit your requirements. Every kit comes packed with all the right fuses so your never get caught short. Just give us a call or ask your Fusetek rep.
Maintenance Kits
23For technical information on any of the products in this short form catalogue
Please visit www.fusetek.com
VJ Series
Approvals: • UL 508 NEMA 3, 3R, 4, 4X, 12 & 13• CSA 3, 3R, 4, 4X, 12 & 13• Lloyd’s Register of Shipping
ARIA Series
Approvals Rating(s): IP65, IP66
Rating(s): IP66-11
• UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13• Lloyd’s Register of Shipping
Poly Safe (PS) Series
Approvals • UL types 3, 3R, 3S, 4, 4X, 12 and 13 per UL 508• CSA types 2, 3, 3R, 3S, 4 4X, 12 and 13• Lloyd’s Register of Shipping
Rating(s): IP65,
Fiberglass Enclosures
• Standard JIC dimensions in 7 sizes from 6”x6” to 18”x16” with varying depths. • Available in plain, raised, clear or windowed covers.• Moulded-on mounting flanges.• Stainless steel or non-metallic hinges.• Moulded grid pattern on inner lid simplifies layout.• Different cover closures available.
• Accessories – Instrumentation windows, steel, aluminium or non-metallic backplates, inner hinged covers, vents, back pan standoffs.
Vynckier Fiberglass Enclosures
• RAL 7035 FRP (fibre reinforced polyester) material is maintenance free, with excellent resistance to UV, corrosion and most chemicals.• Use indoors or outdoors -temperature range from -50*C to 150*C. Momentary to 200*C• Readily worked with standard tools, easy to handle and lighter than metallic enclosures.• Windows, if required are made from 1/4” transparent Lexan polycarbonate.• Total protection against electrical shock.• Poured in place polyurethane gasket ensures high NEMA ratings.• Custom CNC machining service available for all box series• Global approvals
All fiberglass enclosures are:
• Chemical Processing• Waste water treatment plants• Marine installations• Oil refinery• Mining sites• Pulp and Paper Mills• Temporary connections• Public utilities
• Electroplating plants• Food processing plants• Off Shore platforms• Photovoltaic• Sewage plants• Ship yards• Steel mills• Breweries
Application range:
• 14 sizes from 20 x 20” to 50 x 40” • Up to 3 depths using collar extensions• Special coating to enhance resistance to UV radiation.• Wall mounted or free standing• Can be coupled horizontally or vertically with gasketed collars.• 3 to 5 point door closure system ensures seal integrity
• Accessories – key locks, adjustable mounting hardware, rain hoods, floor pads, inner cover panels, gasketed windows, rear doors.
For complete dimensions on all the enclosure series please visit www.fusetek.comAnd download the Vynckier catalogue
24
Polycarbonate Enclosures
Multibox Series
VM Miniature Series
Applications
• Ideal for automation and control applications in industry, machinery, tool-shop and OEM.
• Electronic applications in data and telecom industry.
• Also suitable for use as commercial and industrial distribution boxes.
Approvals: • UL Listed Types 4, 4x, 3, 3R, 12 & 13
• CSA 4, 4x, 3, 3R, 12 & 13
Rating(s): IP66
Approvals
• UL Listed Types: 2, 3, 3R, 3S, 5, 12 & 12K
• CSA Listed Types: 2, 3R, 5, 12 & 12
• Industry
• Public utilities
• Motor control centers
• Electronic instrumentation
• Low voltage distribution boards
VMS Series
Approvals
• UL Listed Types 4X & 12 (Polycarbonate)
• NEMA 4X & 12 (Polystyrene
Applications
• Automation and control applications in industry,
machinery, toolshop and OEM.
• Electronic applications in data and telecom industry.
• As commercial and industrial power distribution boxes.
Rating(s): IP66
• 10 sizes from 5 x 3” to 7x7”• Solid or clear covers• Seamless polyurethane gasket• Available with or without moulded knockouts.• Full range of pushbutton stations available• Can be customized with silk screening or moulded logo’s.
• Accessories – hinged window kits, DIN rail kit
• Modular dimensions in increments of 4”. Sizes from 12 x8” to 24 x 16”• Covers transparent, opaque or DT cover, common design and depth• No tool - removable side walls for easy wiring access.• No tool coupling methods speeds assembly• Adjustable back pan or DIN rail mount depths
• Accessories – Universal cable entry glands, DIN rail kits, depth extension collars
Applications
• 11 sizes from 2x2” to 14 x 10”• Indoor or outdoor use.• Available in Polycarbonate (PC) or Polystyrene (PS). • PC temp range is -35C – 120*C. PS temp range is -40C -70*C• Smooth sides or pre-moulded knockouts.• Solid or clear cover versions.
• Accessories – hinge kits, backpans, mount brackets, air vents, List ratings and approvals
For complete dimensions on all the enclosure series please visit www.fusetek.comAnd download the Vynckier catalogue
Rating(s): IP65
25
VJ Series
Part O/D Dims I/D Dims
H X W X D inches (mm)
VJ606WVJ606HWVJ606HWPL1VJ606HWLL1VJ606NHWVJ606NHWPL1VJ606NHWLL1
7.31 x 7.31 x 4.92(186 x 186 x 125)
6 x 6 x 4.64(152 x 152 x 118)
VJ806WVJ806HWVJ806HWPL1VJ806HWLL1VJ806NHWVJ806NHWPL1VJ806NHWLL1
9.31 x 7.31 x 4.92(236 x 186 x 125)
8 x 6 x 4.64(203 x 152 x 118)
VJ1008WVJ1008HWVJ1008HWPL1VJ1008HWLL1VJ1008NHWVJ1008NHWPL1VJ1008NHWLL1
11.31 x 9.31 x 5.43(287 x 236 x 138
10 x 8 x 5.15(254 x 203 x 131)
VJ1210WVJ1210HWVJ1210HWPL2VJ1210HWLL2VJ1210NHWVJ1210NHWPL2VJ1210NHWLL2
13.31 x 11.31 x 5.60(338 x 287 x 142)
12 x 10 x 5.27(305 x 254 x 134)
VJ1412WVJ1412HWVJ1412HWPL2VJ1412HWLL2VJ1412NHWVJ1412NHWPL2VJ1412NHWLL2
15.31 x 13.31 x 6.60(389 x 338 x 168)
14 x 12 x 6.27(356 x 305 x 159)
VJ1614WVJ1614HWVJ1614HWPL2VJ1614HWLL2VJ1614NHWVJ1614NHWPL2VJ1614NHWLL2
17.31 x 15.31 x 6.67(440 x 389 x 169)
16 x 14 x 6.41(406 x 356 x 163)
VJ1816WVJ1816HWVJ1816HWPL2VJ1816HWLL2VJ1816NHWVJ1816NHWPL2VJ1816NHWLL2
19.31 x 17.31 x 9.58(490 x 440 x 243)
18 x 16 x 9.33(457 x 406 x 237)
ARIA Series
Part O/D Dims I/D Dims
H X W X D inches (mm)
AN1208AN1208FPHAAN1208HKLAAN1208HNAAN1208HPLAAN1208PLAN1208PLFPHA
12.40 x 8.46 x 6.69(315 x 215 x 170)
10.82 x 6.69 x 6.38(275 x 170 x 162)
AN1612AN1612FPHAAN1612HKLAAN1612HNAAN1612HPLAAN1612PLAN1612PLFPHA
16.34 x 12.40 x 6.69(415 x 315 x 170)
14.83 x 10.63 x 6.38(375 x 270 x 162)
AN2016AN2016FPHAAN2016HKLAAN2016HNAAN2016HPLAAN2016PLAN2016PLFPHA
20.28 x 16.34 x 9.06(515 x 415 x 230)
18.75 x 14.58 x 8.82(475 x 370 x 224)
AN2416AN2416FPHAAN2416HKLAAN2416HNAAN2416HPLAAN2416PLAN2416PLFPHA
24.21 x 16.34 x 9.06(615 x 415 x 230)
22.70 x 14.51 x 8.82(575 x 370 x 224)
AN2820AN2820FPHAAN2820HKLAAN2820HNAAN2820HPLAAN2820PLAN2820PLFPHA
28.94 x 21.06 x 10.63(735 x 535 x 270)
26.57 x 18.50 x 10.39
(675 x 470 x 264)
AN3325AN3325FPHAAN3325HKLAAN3325HNAAN3325HPLAAN3325PLAN3325PLFPHA
32.87 x 25.00 x 11.81(835 x 635 x 300)
30.78 x 22.44 x 11.57
(775 x 570 x 294)
AN4032AN4032FPHAAN4032HKLAAN4032HNAAN4032HPLAAN4032PLAN4032PLFPHA
40.75 x 32.87 x 11.81(1035 x 835 x 300)
39.16 x 30.28 x 11.57
(975 x 770 x 294)
VM Series
Part O/D I/D Size
H X W X D inches (mm)
VM433 4.36 x 3.18 x 3.66(111 x 81 x 93)
4.01 x 2.82 x 3.31(102 x 72 x 84)
VM533 5.03 x 3.06 x 3.02(128 x 78 x 77)
4.69 x 2.72 x 2.72(119 x 69 x 69)
VM534 5.03 x 3.06 x 4.02(128 x 78 x 102)
4.69 x 2.72 x 3.72(119 x 69 x 69)
VM553 5.03 x 5.03 x 3.02(128 x 128 x 77)
4.69 x 4.69 x 2.72(119 x 119 x 69)
VM544 5.03 x 5.03 x 4.02(128 x 128 x 102)
4.69 x 4.69 x 3.72(119 x 119 x 94)
VM733 6.72 x 3.17 x 3.61(171 x 81 x 92)
6.37 x 2.82 x 3.33(162 x 72 x 85)
VM753 7.00 x 5.03 x 2.97(178 x 128 x 75)
6.65 x 4.69 x 2.72(169 x 119 x 69)
VM754 7.00 x 5.03 x 4.02(178 x 128 x 102)
6.65 x 4.69 x 3.72(169 x 119 x 94)
VM755 7.00 x 5.03 x 5.02(177 x 128 x 128)
6.65 x 4.69 x 4.72(169 x 119 x 120)
VM773 7.00 x 7.00 x 3.02(178 x 178 x 77)
6.65 x 6.65 x 2.72(169 x 169 x 69)
VM775 7.00 x 7.00 x 5.02(178 x 178 x 128)
6.65 x 6.65 x 4.72(169 x 169 x 120)
VM776 7.00 x 7.00 x 6.02(178 x 178 x 153)
6.65 x 6.65 x 5.72(169 x 169 x 145)
VM933 9.09 x 3.18 x 3.61(171 x 81 x 92)
8.74 x 2.84 x 3.33(222 x 72 x 85)
VMS Series
Part O/D I/D Size
H X W X D inches (mm)
VMS1208VMS1208CT
12.60 x 8.66 x 7.05(320 x 220 x 179)
11.06 x 7.12 x 6.11(281 x 181 x 155)
VMS1212VMS1212CTVMS1212DT
12.60 x 12.60 x 7.05(320 x 320 x 179)
11.06 x 11.06 x 6.11(281 x 281 x 155)
VMS1612VMS1612CTVMS1612DT
17.32 x 12.60 x 7.05(440 x 320 x 179)
15.78 x 11.06 x 6.11(401 x 281 x 155)
VMS2412VMS2412CT
25.2 x 12.60 x 7.05(640 x 320 x 179)
23.66 x 11.06 x 6.11(601 x 281 x 155)
VMS2416VMS2416CT
25.2 x 17.32 x 7.05(640 x 440 x 179)
23.66 x 15.78 x 6.11(601 x 401 x 155)
Enclosure Sizes - Opaque listed only
For complete dimensions on all the enclosure series please visit www.fusetek.comAnd download the Vynckier catalogue
26
MutliBox Series
Part O/D I/D Size Part O/D I/D Size
H X W X D inches (mm)
MB252502PCMB252502PS
2.55 x 2.55 x 2.25(65 x 65 x 57)
2.32 x 2.32 x 1.77(59 x 59 x 45)
MB070402PCMB070402PS
7.08 x 3.70 x 2.24(180 x 94 x 57)
6.85 x 3.46 x 1.77(174 x 88 x 45)
MB252503PCMB252503PS
2.55 x 2.55 x 3.18(65 x 65 x 81)
2.32 x 2.32 x 2.72(59 x 59 x 69)
MB070403PCMB070403PS
7.08 x 3.70 x 3.19(180 x 94 x 81)
6.85 x 3.46 x 2.72(174 x 88 x 69)
MB042502PCMB042502PS
3.70 x 2.55 x 2.25(94 x 65 x 57)
2.32 x 2.32 x 1.77(88 x 59 x 45)
MB070435PCMB070435PS
7.08 x 4.33 x 3.54(180 x 110 x 90)
6.81 x 4.06 x 2.95(173 x 103 x 75)
MB042503PCMB042503PS
3.70 x 2.55 x 3.18(94 x 65 x 81)
3.46 x 2.32 x 2.72(88 x 59 x 69)
MB070404PCMB070404PS
7.08 x 4.33 x 4.37(180 x 110 x 111)
6.81 x 4.06 x 3.82(173 x 103 x 97)
MB040402PCMB040402PS
3.70 x 3.70 x 2.24(94 x 94 x 57)
3.46 x 3.46 x 1.77(88 x 88 x 45)
MB070465PCMB070465PS
7.08 x 4.33 x 6.50(180 x 110 x 165)
6.81 x 4.06 x 5.91(173 x 103 x 150)
MB040403PCMB040403PS
3.70 x 3.70 x 3.18(94 x 94 x 81)
3.46 x 3.46 x 2.72(88 x 88 x 69)
MB070735PCMB070735PS
7.08 x 7.17 x 3.54(180 x 182 x 90)
6.85 x 6.93 x 2.95(174 x 176 x 75)
MB040425PCMB040425PS
4.33 x 4.33 x 2.60(110 x 110 x 66)
4.09 x 4.09 x 2.13(104 x 104 x 54)
MB070704PCMB070704PS
7.08 x 7.17 x 4.37(180 x 182 x 111)
6.85 x 6.93 x 3.82(174 x 176 x 97)
MB040435PCMB040435PS
4.33 x 4.33 x 3.54(110 x 110 x 90
4.09 x 4.09 x 3.07(104 x 104 x 78)
MB070765PCMB070765PS
7.08 x 7.17 x 6.46(180 x 182 x 164)
6.85 x 6.93 x 5.94(174 x 176 x 151)
MB050402PCMB050402PS
5.11 x 3.70 x 2.24(130 x 94 x 57)
4.88 x 3.46 x 1.77(124 x 88 x 45)
MB100735PCMB100735PS
10.00 x 7.09 x 3.54(254 x 180 x 90)
9.76 x 6.85 x 2.95(248 x 174 x 75)
MB050403PCMB050403PS
5.11 x 3.70 x 3.19(130 x 94 x 81)
4.88 x 3.46 x 2.72(124 x 88 x 69)
MB100704PCMB100704PS
10.00 x 7.09 x 4.37(254 x 180 x 111)
9.76 x 6.85 x 3.82(248 x 174 x 97)
MB050503PCMB050503PS
5.11 x 5.11 x 2.95(130 x 130 x 75)
4.88 x 4.88 x 2.48(124 x 124 x 63)
MB100765PCMB100765PS
10.00 x 7.09 x 6.50(254 x 180 x 165)
9.76 x 6.85 x 5.94(248 x 174 x 151)
MB050504PCMB050504PS
5.11 x 5.11 x 3.90(130 x 130 x 99)
4.88 x 4.88 x 3.43(124 x 124 x 87)
MB141004PCMB141004PS
14.21 x 10.00 x 4.37(361 x 254 x 111)
13.98 x 9.76 x 3.82(355 x 248 x 97)
MB141065PCMB141065PS
14.21 x 10.00 x 6.46(361 x 254 x 164)
13.98 x 9.76 x 5.91(355 x 248 x 150)
APO Series
Part O/D I/D Size
H X W X D inches (mm)
A1-706A1-706HA1-706HPL1
7.32 x 5.94 x 5.50(186 x 151 x 140)
6.54 x 5.16 x 5.00(165 x 131 x 127)
A31-1207A31-1207HA31-1207HPL2
11.89 x 7.32 x 6.93(302 x 186 x 176)
11.10 x 6.54 x 6.43(282 x 166 x 163)
A41-1212A41-1212HA41-1212HPL2
11.89 x 11.89 x 6.93(302 x 302 x 176)
11.10 x 11.10 x 6.43(282 x 282 x 163)
A71-1412A71-1412HA71-1412HPL2
14.65 x 11.89 x 6.93(372 x 302 x 176)
13.86 x 11.10 x 6.43(352 x 282 x 163)
A51-1912A51-1912HA51-1912HPL2
19.20 x 11.89 x 6.93(488 x 302 x 176)
18.40 x 11.10 x 6.43(467 x 282 x 163)
A81-2212A81-2212HA81-2212HPL2
21.97 x 11.89 x 6.93(558 x 302 x 176)
21.14 x 11.10 x 6.43(537 x 282 x 163)
A61-2412A61-2412HA61-2412HPL2
23.74 x 11.89 x 6.93(603 x 302 x 176)
22.91 x 11.10 x 6.43(582 x 282 x 163
A11-2414A11-2414HA11-2414HPL2
23.74 x 14.65 x 6.93(603 x 372 x 176)
22.91 x 13.86 x 6.43(582 x 352 x 163)
A12-2424A12-2424HA12-2424HPL4
23.74 x 23.74 x 6.93(603 x 603 x 176)
22.91 x 22.91 x 6.43(582 x 582 x 163)
Poly Safe Series
Part O/D I/D Size
H X W X D inches (mm)
PS2020APS2020ADFR
19.69 x 19.69 x 12.60(500 x 500 x 320)
19.44 x 19.44 x 12.35(494 x 494 x 314)
PS2030APS2030ADFR
19.69 x 29.53 x 12.60(500 x 750 x 320)
19.44 x 29.28 x 12.35(494 x 744 x 314)
PS3020APS3020ADFR
29.53 x 19.69 x 12.60(750 x 500 x 320)
29.28 x 19.44 x 12.35(744 x 494 x 314)
PS3030APS3030ADFR
29.53 x 29.53 x 12.60(750 x 750 x 320)
29.28 x 29.28 x 12.35(744 x 744 x 314)
PS3040APS3040ADFR
29.53 x 39.37 x 12.60(750 x 1000 x 320)
29.28 x 39.12 x 12.35(744 x 994 x 314)
PS3050/2APS3050/2ADFR
29.53 x 49.21 x 12.60(750 x 1250 x 320)
29.28 x 48.96 x 12.35(744 x 1244 x 314)
PS4020APS4020ADFR
39.37 x 19.69 x 12.60(1000 x 500 x 320)
39.12 x 19.44 x 12.35(994 x 494 x 314)
PS4030APS4030ADFR
39.37 x 29.53 x 12.60(1000 x 750 x 320)
39.12 x 29.28 x 12.35(994 x 744 x 314)
PS4040APS4040/2APS4040ADFRPS4040/2ADFR
39.37 x 39.37 x 12.60(1000 x 1000 x 320)
39.12 x 39.12 x 12.35(994 x 994 x 314)
PS4050/2APS4050/2ADFR
39.37 x 49.21 x 12.60(1000 x 1250 x 320)
39.12 x 48.96 x 12.35(994 x 1244 x 314)
PS5030APS5030ADFR
49.21 x 29.53 x 12.60(1250 x 750 x 320)
48.96 x 29.28 x 12.35(1244 x 744 x 314)
PS5040/2APS5040/2LAPS5040/2ADFRPS5040/2LADFR
49.21 x 39.37 x 12.60(1250 x 1000 x 320
48.96 x 39.12 x 12.35(1244 x 994 x 314)
Enclosure Sizes - Opaque listed only
For complete dimensions on all the enclosure Series please visit www.fusetek.comAnd download the Vynckier catalogue
Basic I.P. Rating
First digit - Solid Particle Protection: 0 = No protection, 1 = back of hand, 2 = finger safe, 3 = Tool, 4 = wire, 5 = dust protected & wire, 6= Dust Tight
Second Digit - Liquid ingress Protection: 0=None, 1 = Dripping water, dripping water when tilted at 15 degress, 3 = spraying water, 4 = splashing of water, 5=water jets, 6= powerful water jets, 7= immersion to 1 meter, 8=immersion beyond 1 meter, 9k=Powerful high temperature water jets.
27
599 Norris CourtKingston, OntarioCanada, K7P2R9
T: (800) 479-3875F: (800) 866-7690
E: info@fusetek.comW: www.fusetek.com
Pub.#PSG-01V2 Printed in Canada