Post on 11-Feb-2022
1
2013 Product Catalog
Jiangsu Shuanghui Power Development Co., LTD
2
Table of Contents
Introduction Page 1-5 Section 1 – Fittings (Ball, Eye, Socket, Clevis) Page 6 Section 2 – Yoke Plates Page 30 Section 3 – Hold Down Weights Page 43-44 Section 4 – Vibration Dampers Page 45-49 Section 5 – Spacer Damper Page 50-52 Section 6 – Deadend Hardware Page 53-66 Section 7 – Jumper Terminals Page 67-70
3
Section 8 – Suspension Clamp Page 71-75 Section 9 – ACSS Hardware (Dead end, Suspension clamp, splice sleeve) Page 76-87 Section 10 – Preformed Armor Rod Page 88-90 Contact Information Page 91
Table of Contents
4
Introduction
Quality first, immediate technical support, competitive price JS Hardware, founded in 1974, is the largest manufacturer of hardware and fittings for transmission lines and substations in China. All manufacturing and test is done at our 20 acre campus located in Jiangdu City which is ISO 9001 compliant. We offer a broad product line to accommodate any transmission hardware application. Among other achievements, our products have been installed on over 5000 miles of 500kV transmission line with zero failures to date. The following material is the abbreviated version of our product line. For drawings, reports or quotations, please contact your local sales representative or email to sales@js-hardware.com
Best quality, excellent technical
support, competitive price
5
Metal Material Standard
JS Hardware adheres to the following standards of ASTM International for all metal materials used in production of transmission hardware.
Aluminum Alloy : ASTM A356-T6
Steel: ASTM 5140
Stainless steel: ASTM 304
6
CW
L
PD
B
E
BC Ball Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel
*) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Clevis fittings for use with ANSI C29.2 & CSA C83 insulators
52-3 and 52-5 (BC-30) 52-8 and 52-11 (BC-50)
1.2(0.55) 1.4(0.64)
1(0.45)
2(50.8)
23/32(18.3)57/64(22.6)
1-11/16 (42.9)
7/8(22.2)
15/16(23.8)
2-1/2(63.5)
3-15/16 (100)
1-9/16(39.7)
E
15/16(23.8)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
L B PD CWeightLbs(kg)
BC-30 30,000 (133)
2-15/16(74.6)
23/32(18.3)
1-11/16 (42.9)
5/8(15.9)
36,000 (160)BC-36
BC-50 50,000 (222)
1-1/8(28.6)
7/8(22.2)
2-3/16(55.5)
W
4-5/16 (110)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1
2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
7
A
D
BL
W
Ball Eye
Material: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (BE-30) 52-8 and 52-11 (BE-50)
BE
3/4(19.1)
57/64(22.6)
23/32(18.3)
11/16(17.5)
A DIAD
50,000 (222)
30,000 (133)
1(25.4)
3-3/4 (95)BE-30
WeightLbs(kg)WBL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
BE-50
1.22(0.55)1.75(0.8)
2-3/64 (52)
4-33/64 (115)
2-31/64 (63)
1-1/4 (32)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
8
L
PD
A
R
C
T
Ball Y-Clevis
BYC
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Ball Y-Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (BYC-30) 52-8 and 52-11 (BYC-50)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
L A R PD CWeightLbs(kg)
BYC-30 30,000 (133)
3-1/6(80.4)
1-1/2(38.1)
1/2(12.7)
1-7/8 (48)
3/4(19.1)
36,000 (160)BYC-36
BYC-50 50,000 (222)
3-1/3(85)
5/8(16)
2-3/16(55.5)
7/8(22.2)
1-9/16(40)
1-13/16 (46)
7/8(22.2)
3-15/16 (100)
5/8(16)
2-3/16(55.5)
1.94(0.88)
T
23/32(18.3)23/32(18.3)57/64(22.6)
2.80(1.27)
2.35(1.1)
9
TYPE CC TYPE CC90
W
D
BL
PDPD
D
BC
L
Clevis Clevis (Right Angle)
CC
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
6.0(2.72)
9/8(28.6)
1-1/4(31.8)
1-5/8(41.3)
2-1/4 (57)
2-1/4 (57)
5-1/8(130)
2(50.8)
2(50.8)
1(25.4)
1(25.4)
3/4(19.1)
4.0(1.83)
3-27/50 (115)
4.0(1.83)
3/4(19.1)
1(25.4)
1(25.4)
2(50.8)
2(50.8)
3-27/50 (115)
3.3(1.5)
7/8(22.2)
7/8(22.2)
3/4(19.1)
1-1/2 (38)
1-1/2 (38)
3-15/16 (90)
3.2(1.45)
3/4(19.1)
7/8(22.2)
7/8(22.2)
1-3/4(44.5)
1-3/4(44.5)
3-15/16 (100)
2.7(1.23)
1-3/8(34.9)
3-2/25 (78)
2.7(1.23)
5/8(15.9)
7/8(22.2)
7/8(22.2)
1-3/4(44.5)
1-3/4(44.5)
7/8(22.2)
50,000 (222)
40,000 (178)
80,000 (356)
50,000 (222)
40,000 (178)
CC-80
CC-50
CC-40
30,000 (133)
25,000 (98)30,000 (133)CC-30
7/8(22.2)
1-3/8(34.9)
5/8(15.9)
1-11/16 (42.9)
1-1/2 (38)
3-2/25 (78)CC-25
WeightLbs(kg)DWCBL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1-1/16 (27)
PD
1-9/16(39.7)
3-15/16 (100)
(15.9)
2.7(1.23)
CC-4090
CC-5090
CC-3090
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
10
DIA
DIA
Clevis Eye
CE
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
7/8(22.2)
50,000 (222)
18,000 (80)
20,000 (89)
2-1/2(63.5)
1-1/16 (27)
13/16(20.6)CE-18
WeightLbs(kg)LDBWA
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1/2(12.7)
DIA
11/16(17.5)
1.6(0.73)
CE-20
CE-25
CE-25W
CE-2590
CE-30
CE-3090
CE-3590
CE-5090
CE-6090
13/16(20.6)
5/8(15.9)
1-1/16 (27)
2-1/2(63.5)
11/16(17.5)
1.67(0.76)
30,000 (133)
35,000 (156)
25,000 (111)25,000 (111)
25,000 (111)
30,000 (133)
60,000 (267)
13/16(20.6)
3/4(19.1)
1-1/16 (27)
7/8(22.2)
2-1/2(63.5)
11/16(17.5)
1.75(0.79)
13/16(20.6)
1-1/16 (27)
7/8(22.2)
2-1/2(63.5)
11/16(17.5)11/16(17.5)
7/8(22.2)
1-1/4 (32)
13/16(20.6)
1(25.4)1-3/8 (35)
1.76(0.80) 2.1(0.95)
CE-209020,000 (89)
13/16(20.6)
1-1/4 (32)
7/8(22.2)
2-5/8 (67)
11/16(17.5)
1.76(0.8)
5/8(15.9)
2-5/8 (67)
PD
5/8(15.9)
5/8(15.9) 5/8(15.9) 5/8(15.9)
5/8(15.9) 5/8(15.9) 5/8(15.9) 5/8(15.9)
3/4(19.1) 3/4(19.1)
3/4(19.1)
CE-1890 18,000 (80)
7/8(22.2)
1/2(12.7)
1-1/4 (32)
2-5/8 (67)
11/16(17.5)
5/8(15.9)
1.76(0.8)
15/16(23.8)
1-3/4(44.5)
7/8(22.2)
3-11/32 (85)
11/16(17.5)
2.53(1.15)
1(25.4)
3/4(19.1)
1-9/16 (40)
7/8(22.2)
3-11/32 (85)
11/16(17.5)
1.87(0.85)
5/8(15.9)
1(25.4)
1(25.4)
3/4(19.1)
3-1/2 (89)
1-1/2 (38)
15/16(23.8)
2.1(0.95)
7/8(22.2)
3-1/2 (89)
2-1/8 (54)
1(25.4)
1-1/16 (27)
2.82(1.28)
7/8(22.2)
1-1/2 (38)
5-1/2(140)
1-1/16 (27)
2-1/8 (54)
1-1/8(28.6)
1-1/2 (38)
3.4(1.54)
7/8(22.2)
7/8(22.2)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
11
13/16 (20.6) 13/16 (20.6) 13/16 (20.6)
13/16 (20.6) 13/16 (20.6)
3/4(19.1)
3/4(19.1) 3/4(19.1)
3/4(19.1)
3/4(19.1)
13/16 (20.6)
11/16(17.5)
11/16(17.5)
11/16(17.5)
11/16(17.5)11/16(17.5)
2-7/16 (62)
1-5/8(41.3)
DIAR
20,000 (89)
2-13/16 (71.4)
1-3/8 (35)YCE-20
WeightLbs(kg)PDB L W
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1.85(0.84)
5/8(15.9)
YCE-20R 5/8(15.9)
1.85(0.84)
YCE-25
YCE-25R
YCE-30
YCE-30R
YCE-40R
YCE-40
20,000 (89)25,000 (111)25,000 (111)
1-3/8 (35)
2-13/16 (71.4)
3/4(19.1)
1.90(0.86)
1-5/8(41.3)
2-7/16 (62)
3/4(19.1)
1.90(0.86)
30,000 (133)30,000 (133)
1-3/8 (35)
2-13/16 (71.4)
1(25.4)
1.95(0.88) 1.95(0.88)
11/16(17.5)
3/4(19.1)
13/16 (20.6)
1(25.4)
2-7/16 (62)
1-5/8(41.3)
40,000 (178)40,000 (178)
2-7/16 (62)
1-1/4(31.8)
13/16 (20.6)
7/8(22.2)
2.64(1.20)
1-29/50 (40)
2-7/16 (62)
1-29/50 (40)
1-3/4 (35)
13/16 (20.6)
7/8(22.2)
13/16 (20.6)
2.9(1.32)
YCE Y-Clevis Eye
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel Note: The difference of type YCE and YCE-R is the conductor orientation.
BD BD
LB
R
DIA
DIAW
RL
B
TYPE YCE TYPE YCE-R
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
12
L
WD
Material: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Chain Link
CL
1(25.4)
60,000 (267)CL-60
1/2(12.7)
30,000 (133)CL-30
WeightLbs(kg)DL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1(25.4)
3/4(19.1)
0.5(0.23) 1.6(0.73)
W
2-1/4(57.2) 3-1/2 (89)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
13
Socket Clevis
SC
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
1-3/16 (30)
2.0(0.91)
1.35(0.61)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
CL BWeightLbs(kg)
SC-30
13/16(20.6)
2-1/8 (54)
30,000 (133)
PD
1-1/2(38)
LB
PD
C
SC-18 18,000 (80)
W
5/8(15.9)
1-15/16 (49.2)
5/8(15.9)
7/8(22.2)
2-5/8 (67)
1-5/8 (41)
5/8(15.9)
40,000 (178)SC-40
1-3/4(44.5)
SC-30L 30,000 (133)
CL
B
TYPE SC TYPE SC-L
7/8(22.2)
4-33/64 (115)
3.52(1.60)
1-3/4(44.5)
SC-50 50,000 (222)
3-9/32 (85)
2-1/16(52.4)
7/8(22.2)
2(50.8)
5.1(2.32)
1-7/16(36.5)
1-9/16(39.7)
2-1/16(52.4)
3-9/32 (85)
7/8(22.2)
2(50.8)
4.3(1.96)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
14
L
W
R
DIA
Socket Eye
SE
Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SE-30) 52-8 and 52-11 (SE-50)
30,000 (133)
3.52(1.60)
11/16(17.5)
W
18,000 (80)SE-18
DIA
13/16(20.6)
1/2(12.7)
WeightLbs(kg)R
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1.25(0.57)
L
SE-20 20,000 (89)
5/8(15.9)
13/16(20.6)
11/16(17.5)
1.3(0.59)
SE-30 30,000 (133)
7/8(22.2)
13/16(20.6)
1.35(0.61)
SE-30L 30,000 (133)
1(25.4)
13/16(20.6)
5-1/2(140)
1.9(0.86)
SE-30W 1-1/4(32)
3 (76)
1-3/16(30.2)
SE-50 50,000 (222)
1-1/8(28.6)
1-3/16(30.2)
5-1/2(140)
1-3/16(30.2)
5.3(2.4)
SE-50W 50,000 (222)
1-1/2(38.1)
1-1/8(28.6)
5-1/2(140)
1-3/16(30.2)
6.0(2.7)
1(25.4)
11/16(17.5)
11/16(17.5)
2-5/64(52.8)2-5/64(52.8)2-5/64 (52.8)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
15
L
SS Socket Socket
Material: Body: Forged steel, hot dip galvanized
Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SS-30)
30,000 (133)SS-30
WeightLbs(kg)
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
2.27(1.03)
L
2-5/64(52.8)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
16
LB
45¡ ã
BD
R
Socket “Y” Clevis
SYC
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (SYC-30) 52-8 and 52-11 (SYC-50)
7/8(22.2)SYC-50
3/4(19.1)
5.2(2.36)
3.0(1.36)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm) WeightLbs(kg)
2-3/4(70)
50,000 (222)
SYC-30 30,000 (133)
1-5/8 (41)
1/2(12.7)
L B R BD
1-37/64 (40)
2-61/64 (75)
7/16(11.1)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
17
BL
C
R
W
ZD
T
Anchor Shackle
Material: Body: Forged steel, hot dip galvanized Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
U
7/8(22.2)
6.4(2.9)
9/8(28.6)
1-1/16 (27)
1(25.4)
2-3/8 (60)
27/16(42.9)
27/16(42.9)
5.9(2.7)
1-7/8(47.6)
7/8(22.2)
3/4(19.1)
3/4(19.1)
3/4(19.1)
1-7/8(47.6)
7/8(22.2)
7/8(22.2)
2.4(1.1)
4.2(1.9)
1(25.4)
1-1/8(28.6)
7/8(22.2)
2-1/2 (54)
1-7/16 (36.5)
7/8(22.2)
2.75(1.25)
3/4(19.1)
3/4(19.1)
3/4(19.1)
7/8(22.2)
2.5(1.13)
1-1/4(31.8)
1.65(0.75)
5/8(15.9
1-11/16 (42.9)
0.7(0.32) 0.95(0.43) 1.45(0.66)
5/8(15.9)
5/8(15.9)
5/8(15.9)
5/8(15.9)
1-3/8(34.9)
1(25.4)
1-1/16 (27)
5-29/32 (150)
100,000 (445)U-100(W)
9/8(28.6)
2-3/8 (60)
1(25.4)
1(25.4)
4-21/64 (110)
100,000 (445)
U-100
3-3/4(95)
80,000 (356)
1-15/16 (49.2)
5(127)
60,000 (267)
3-1/2(90)
60,000 (267)
U-50(W) 50,000 (222)
3/4(19.1)
7/8(22.2)
1(25.4)
3-9/16(90)
3/4(19.1)
1-1/16 (27)
3/4(19.1)
11/16(17.5)
40,000 (178)
2-3/4(70)
1-11/16 (42.9)
1(25.4)
1-3/4(44.5)
2-61/64 (75)
30,000 (133)
U-80(W)
U-60L
U-60
U-35(40)
U-30L
21/32(16.7)
1/2(12.7)
5/8(15.9)
7/8(22.2)
2-3/4 (70)
30,000 (133)U-30
5/8(15.9)
5/8(15.9)
1-3/8(34.9)
1/2(12.7)
11/16(17.5)
7/8(22.2)
2-3/8 (60)
25,000 (98)U-25
WeightLbs(kg)ZDC TB RWL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
18
A
L
W
B
PD
S DIA
T
Hot Line Ball Clevis
Ball Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HBC-30) 52-8 and 52-11 (HBC-50)
HBC
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
7/8(22.2)
3.52(1.6)
2.42(1.1)
7/8(22.2)
15/16(23.8)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
L A B W PD S DIA T DIAWeightLbs(kg)
9-7/16 (240)
1-3/4(44.5)
5-7/8(148)
5/8(15.9)
7/8(22.2)
23/32(18.3)
15/16(23.8)
30,000 (133)
10-3/64 (255)
1-27/32 (46.8)
57/64(22.6)
5-13/32(137.3)
50,000 (222)HBC-50
HBC-30
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
19
PD
S DIAB
W
LW
TYPE HCC TYPE HCC90
HCC Hot Line, Clevis Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel
1(25.4)
2(50.8)
3.38(1.53)
5/8(15.9)
7/8(22.2)
1-21/32 (42)
5-29/32 (150)
10(254)
4.5(2.0)
3/4(19.1)
9/8(28.6)
1-1/16 (27)
9-21/32 (245.3)
14-61/64 (380)
40,000 (178)
D
30,000 (133)
30,000 (133)
1-21/32 (42)
7/8(22.2)
5/8(15.9)
1(25.4)
5-29/32 (150)
10(254)
WeightLbs(kg)S DIA PDWBL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
3.38(1.53)HCC-30
HCC-40
HCC-3090
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
20
HCE Hot Line, Clevis Eye
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel
7/8(22.2)
7/8(22.2)
1(25.4)
10(254)
2.4(1.1)
7/8(22.2)
5/8(15.9)
11/16(17.5)
7/8(22.2)
5/8(15.9)
13/16(20.6)
2-61/64 (75)
7-3/32 (180)
30,000 (133)
3.63(1.65)
1-1/8(28.6)
3/4(19.1)
1-13/64(30.55)
1-1/4(31.8)
1-1/4(31.8)
7/8(22.2)
5-29/32 (150)
11-1/64 (280)
2.7(1.2)
5/8(15.9)
11/16(17.5)
7/8(22.2)
5/8(15.9)
5-29/32 (150)
30,000 (133)40,000 (178)
5-29/32 (150)
S DIAPDB
30,000 (133)
5/8(15.9)
5/8(15.9)
11/16(17.5)
7/8(22.2)
1(25.4)
10(254)
WeightLbs(kg) IRWDL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
2.7(1.2)
HCE-30S
HCE-30
HCE-3090
HCE-40
L
D
R
S DIA S DIA
PD
W
PD
D
TYPE HCE TYPE HCE90
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
21
A
L
W
45¡ ãA
TYPE HCYC TYPE HCYC90
HCYC-3090
A
30,000 (133)
30,000 (133)
7/8(22.2)
5/8(15.9)
1(25.4)
6-19/64 (160)
10-7/16 (265)HCYC-30
WeightLbs(kg)S DIA PDWBL
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
3.63(1.65)
B
PD
S DIA
1-37/64 (40)
BD
3/4(19.1)
3.63(1.65)
3/4(19.1)
5/8(15.9)
7/8(22.2)
1-37/64 (40)
6-19/64 (160)
10-7/16 (265)
1(25.4)
Hot Line, Clevis “Y” Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel
HCYC
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
22
T DIA
C
S DIA
L
W
A DIA
HEB
Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Ball Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HEB-30) 52-8 and 52-11 (HEB-50)
1-3/16 (30)
1-3/16 (30)
50,000 (222)HEB-50 3/4
(19.1)
1(25.4)
T DIAW
30,000 (133)
7/8(22.2)
23/32(18.3)
11-1/64 (279.8)
2(50.8)
11/16(17.5)HEB-30
WeightLbs(kg)S DIALBA
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
2.33(1.05)1.75(0.79)
1-1/4 (32)
2-1/2(63.5)
4-23/32 (119.8)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
Hot Line, Ball Eye
23
C
S DIA
D
S DIAB
A
R
TW
C
L
TYPE HEPE TYPE HEPE90
HEPE Hot Line Eye Pad Eye
Material: Body: Forged steel, hot dip galvanized
1 (25.4)
2.8(1.27)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
L B C TWWeightLbs(kg)
12(305)
7-5/64 (180)
2-1/8 (54)
23/32(18.3)
15/16(23.8)
30,000 (133)30,000 (133)
R
7/8(22.2)
S DIA
7/8(22.2)
11/16(17.5)
D
11/16(17.5)
A
5/8(15.9) 5/8(15.9)
12(305)
7-5/64 (180)
2-1/8 (54)
1 (25.4)
15/16(23.8)
23/32(18.3)
2.8(1.27)
HEPE-30
HEPE-3090
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
24
HSC Hot Line Socket Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Socket Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSC-30) 52-8 and 52-11 (HSC-50)
S DIA
B
PD
W
C
L
2.97(1.35)
1-3/16 (30)
7/8(22.2)
2(50.8)
6-13/16 (173)
6-3/16(157.2)
7/8(22.2)
5/8(15.9)
1(25.4)
1-1/2 (38)
9-27/32 (250)
30,000 (133)50,000 (222)
11-1/64 (279.8)
6.6(3.0)
15/16(23.8)
7/8(22.2)
PD
2.86(1.3)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
CBL S DIAWeightLbs(kg)
8-1/4 (209.6)
4-5/8 (117.5)
1-1/2 (38)
5/8(15.9)
30,000 (133)
W
1(25.4)HSC-30
HSC-30L
HSC-50
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
25
Hot Line Socket Eye
HSE
Material: Body: Forged steel, hot dip galvanized *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Socket Eye fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSE-30) 52-8 and 52-11 (HSE-50)
1-3/16 (30)
2(50.8)
6-1/2(165)HSE-50 50,000
(222)1-11/32 (34)
7/8(22.2)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
RBL S DIA
HSE-30 10 (254)
6-1/4(159)
30,000 (133)
W
L B
S DIA
W
R
3/4(19.1)
7/8(22.2)
10 (254)
DIA
5.1(2.3)
2.86(1.3)
WeightLbs(kg)DIA
1-1/16 (27.1)
11/16 (17.5)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
26
L B S DIA
C
PD
45¡ ã
HSYC Hot Line Socket Y-Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Socket Y-Clevis fittings for use with ANSI C29.2 & CSA C83 insulators 52-3 and 52-5 (HSYC-30) 52-8 and 52-11 (HSYC-50)
7/8(22.2
7/8(22.2)1-3/16 (30)
1-21/32 (42)
5-29/32 (150)HSYC-50 50,000
(222)7.36(3.34)
3.52(1.6)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
CBL S DIAWeightLbs(kg)
HSYC-30 9-21/32 (245.3)
6 (152.4)
30,000 (133)
PD
3/4(19.1)
1-19/32 (40.5)
10-1/4 (260.3)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
27
T DIA
S DIA
45¡ ã
PD
C
L B
HBYC Hot Line Ball Y-Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Ball Y-Clevis fittings for use with ANSI C29.2 insulators 52-3 and 52-5 (HBYC-30) 52-8 and 52-11 (HBYC-50)
57/64(22.6)
7/8(22.2)
7/8(22.2)
6-13/16 (173)
11-1/64 (279.8)
23/32(18.3)
7/8(22.2)
T DIA
HBYC-50
1-1/2 (38)
3/4(19.1)
PD
30,000 (133)
5-3/8(136.5)
9-1/4 (235)HBYC-30
WeightLbs(kg)S DIAL B C
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
2.7(1.23)4.42(2.0)
50,000 (222)
1-21/32 (42)
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
28
W
3-1/4(82.6)
B
15,000 (67)
15/16(23.8)
7-7/8(200)HYCE-15
S DIAL R
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
S DIA
45¡ ã
BD
C
L B
TYPE HYCE TYPE HYCE90
WeightLbs(kg)
3.0(1.36)
R
DIA BD C
HYCE-1590
50,000 (222)
15,000 (67)
5/8(15.9
11/16(17.5)
1/2(12.7)
3/4(19.1)
w
3.0(1.36)
1/2(12.7)
11/16(17.5)
3-1/4(82.6)
5/8(15.9)
15/16(23.8)
7-7/8(200)
HYCE-30
HYCE-3090
30,000 (133)
11-1/64 (279.8)
15/16(23.8)
15/16(23.8)
7/8(22.2) 7/8(22.2)
6-3/8(162)6-3/8(162)
11/16(17.5
11/16(17.5)
5/8(15.9) 5/8(15.9)
11-1/64 (279.8)
4.2(1.90) 4.2(1.90)
30,000 (133)
HYCE-4090
HYCE-40
40,000 (178)
40,000 (178)
11-1/64 (279.8)
11-1/64 (279.8)
1-1/32(26.2)1-1/32(26.2)
1-1/8(28.6)1-1/8(28.6)
6-5/8(168)6-5/8(168)
13/16(20.6)13/16(20.6)
25/32(19.8)25/32(19.8)
7/8(22.2)
1-9/16 (39.7)
7/8(22.2)
1-1/4(31.8)
6-5/8(168)
12-13/32 (315.1)
DIA
1-3/16 (30)
2(50.8)
1-1/4(31.8)HYCE-50
4.85(2.2)4.85(2.2)5.85(2.65)
3/4(19.1)
3/4(19.1)
3/4(19.1)
7/8(22.2) 7/8(22.2)
1-9/16 (39.7)
1-9/16 (39.7)1-9/16 (39.7)
1-9/16 (39.7)1-9/16 (39.7)
HYCE Hot Line Y-Clevis Eye
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
29
BL
C
45¡ ã
S DIA
45¡ ã
BD
9/8(28.6)
10-1/8(257)
15(381)
2(50.8)
1-37/64 (40)
50,000 (222)
8.77(3.98)
4.3(2.0)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
CBL S DIAWeightLbs(kg)
HYYC-30 15(381)
10-3/8(264)
30,000 (133)
BD
3/4(19.1)
HYYC-50
7/8(22.2)
7/8(22.2)
HYYC Hot Line Y-Y-Clevis
Material: Body: Forged steel, hot dip galvanized Clevis pin: Galvanized steel Cotter pin: Stainless steel *) Ultimate Strength equal or larger than 50,000LBS are applied to EHV Line
Note: 1. For CSA 83, Level 1, add C1 at the end of the catalog number, e.g. BC-30-C1 2. For CSA 83, Level 2, add C2 at the end of the catalog number, e.g. BC-30-C2
30
5''(127) 3/4''L1
L2
L3 L4L5
L6
YA-40(40,000 LBS) type yoke plates may be furnished in a verity of sizes, and the dimensions and strength rating can be specified by customer.
Adjustable Yoke Plate
YA
Material: Steel, galvanized
31
E
H
W
0.63
''
YB Yoke Plates
Material: Body:356-T6 aluminum alloy Clevis Pin: galvanized steel Cotter Pin: stainless steel
Catalog number
Ultimate Strength Lbs (kN) Dimension inches (mm) Weight lbs (kg)
E H W
YB-15 15,000(67) 12(305) 2.63(69.9) 1.19(30.2) 1.8(0.82)
YB-15R 15,000(67) 12(305) 2.63(69.9) 1.19(30.2) 2.25 (1.02)
YB-30 30,000(133) 12(305) 3.5(88.9) 1.75(44.5) 3.2(1.4)
YB-30R 30,000(133) 12(305) 3.5(88.9) 1.75(44.5) 3.53 (1.6)
Note: YB series are only with pin.
YB-R series are with bolt, nut and pin.
32
YT Yoke Plates
Material: Steel, galvanized
9''(228.5) 9''(228.5)
50¡ ã 50¡ ã
6- Holes Dia.1.25''(32)
18''(4
57)
3/4 THICK
YT7-40(40,000 LBS) type yoke plates may be furnished in a verity of sizes, and the dimensions and strength rating can be specified by customer.
33
4-A
L
H
40,000 (178)
YC4-40
WeightLbs(kg)B L A
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
9(228.5)
1-1/4(32)
3/4(19.1)
L
5.25 (133)
3-3/4 (95)
L
3/4(19.1)
1-1/4(32)
18(457)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
ALBWeightLbs(kg)
YC5-50 50,000 (222)
H
72¡ ã
L
5-A
45¡ã
H
12.3(5.6)
B
B
5-A
H
L
78¡ ã 23¡ ã
H
30,000 (133)
YC5-30
WeightLbs(kg)B L A
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
9(228.5)
1-1/4(32)
3/4(19.1)
L
6-22/25 (175)
12.7(6.2)
B
13.2(6.0)
YC Yoke Plates
Material: Steel, galvanized Contact JS Hardware if additional holes required
34
45¡ ã 45¡ ã
4(102)
5 (127)
3/4(19.1)
H
30,000 (133)
YV9-30
WeightLbs(kg)B L A1
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
18(457)
a
a
5-A1
1-1/4(32)
1-1/4(32)
5-A
a
18(457)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
ALB
YV5-40 40,000 (178)
H
3/4(19.1)
5 (127)
3 1/2 (89)
45¡ ã45¡ ã
L
H
4-A2
A2
1/2(12.7)
12.6(5.7)
(12.1)
L
H
B
B
b
WeightLbs(kg)
3 1/2 26.73
b
YV Yoke Plates
Material: Steel, galvanized
35
YR Yoke Plates
Material: Steel, galvanized
A22
18(457)
H
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
A11LBWeightLbs(kg)
YR8-40 40,000 (178)
H
5.5(140)
3/4(19.1)
1-3/16 (30)
1-1/16 (27)
4-A2
3/4(19.1)
5.5(140)
H
50,000 (222)
YR7-50
WeightLbs(kg)B L A11
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
L
18(457)
A22
15/16(24)
13/16(20.6)
B
B
4-A2
3-A1
33.0 (15)
31.3(14.2)
36
L
H
5-A
1(25.4)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
ALBWeightLbs(kg)
YR5-30 3/4(19.1)
13(330)
30,000 (133)
H
4.5(114.3)
6(152)
H
30,000 (133)
5/8(16)
YR6-30
WeightLbs(kg)B L A11
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
11/16(17.5)
H
L
18(457)
2-A1
4-A2
15/16(24)
A22
B
B
10.57(4.8)
28.4(12.9)
YR Yoke Plates
Material: Steel, galvanized
37
L
H
3-A2
A1
B
B
A1
3-A2
H
L
b
26.0(11.8)
22.7 (10.3)
b
1-5/16 (33)
WeightLbs(kg)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
A1LBWeightLbs(kg)
YD4-100 7/8(22.2)
100,000 (445)
H
6-1/8(156)
A22
18(457)
1-1/16 (27)
15/16 (24)
15/16 (24)
1-1/16 (27)
18(457)
A2
6-1/8(156)
H
90,000 (400)
3/4(19.1)
YD4-90
B L A1
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
YD Yoke Plates
Material: Steel, galvanized
38
2-A2
L
H
A1
B
2-A3
b
2-A2
B
3-A1
H
L
b
23.6(10.7)
18.3(8.3)
1-5/16 (33)
bWeightLbs(kg)
1-1/4(32)
5(127)
H
YD5-80 80,000 (356)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
A11LB
3/4(19.1)
A22
18(457)
1(25.4)
WeightLbs(kg)b
1-5/16 (33)
1-1/16 (27)
15/16(24)
A3
4(101.6)
18(457)
A2 H
3/4(19.1)
B L A11
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
72,000 (320)
YD5-72 1-1/4(32)
YD
Material: Steel, galvanized
Yoke Plates
39
B
A1
2-A2
H
L
L1
2-A2
L
H
A1
B
2-A3
b
21.1(9.6)
11.0(5.0)
5(127)
H
WeightLbs(kg)
1-1/8(28.6)
b
1-1/8(28.6)
1-1/4(32)
A3
18(457)
A2
3/4(19.1)
B L A1
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1-3/16 (30)
60,000 (267)
YD5-60
L1
6(152.4)
15/16(24)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
A11LBWeightLbs(kg)
YD3-60 3/4(19.1)
13(330)
60,000 (267)
H
3.44(87)
A2
13/16(20.6)
YD
Material: Steel, galvanized
Yoke Plates
40
B
4-A
H
L
B
A1
H
L
4-A2
L1
21.6(9.8)
6(152.4)
L1
1-1/4(32)
YD5-50 50,000 (222)
1-1/8(28.6)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
A11LBWeightLbs(kg)
3/4(19.1)
HA2
18(457)
5(127)
4(101.6)
H
50,000 (222)
8(203)
3/4(19.1)
YD4-50
WeightLbs(kg)B L A
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
7.35(3.3)
1-1/4(32)
YD Yoke Plates
Material: Steel, galvanized
41
5-A
L
H
2-A2
A1
B
LL1
h
H
B
2-5/8 (67)
h
1-1/4(32)
12.99(5.9)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
ALBWeightLbs(kg)
YD5-40 3/4(19.1)
18(457)
40,000 (178)
H
3-5/8 (92)
L1
6(152.4)
11/16(17.5)
A2
3-11/16(93.7)
H
40,000 (178)
13(330)
3/4(19.1)
YD3-40
WeightLbs(kg)B L A11
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
6.186(2.8)
1-1/4(32)
YD
Material: Steel, galvanized
Yoke Plates
42
L
5-DIA
B
HH
BL
4-DIA
3-5/8(92)
H
30,000 (133)
18(457)
3/4(19.1)
YD5-30
WeightLbs(kg)B L DIA
Dimensions lnches(mm)UltimateStrengthLbs(kN)
CatalogNumber
1-1/4(32)
1-1/4(32)
CatalogNumber
UltimateStrengthLbs(kN)
Dimensions lnches(mm)
DIALBWeightLbs(kg)
YD4-30 3/4(19.1)
9(228.6)
30,000 (133)
H
6(152.4)
7.35(3.3)
12.35(5.6)
YD
Material: Steel, galvanized
Yoke Plates
43
5''
B
C
9''
9''
13/1
6''
1-5/
8''
ZC Hold Down Weight
Material: Ductile Iron, galvanized
50(22.7)
1-1/8(28.6)
2-5/8(66.7)
WEIGHT
ZC-1
DIMENSIONS IN(mm)CatalogNumber B C
LBS(KGS)
Note: The bolt number are determined by the quantity of Hold down weight.
44
B
L
4''3.5'' 3.5''
2.75
''
0.75
''DIA
c
ZG Hold Down Weight
Material: Ductile iron, galvanized
2-1/2(63.5)
CBL
CatalogNumber
DIMENSIONS IN(mm)
ZG-1
WEIGHT LBS(KGS)
8-5/8(219)
5/8(16)
50(22.7)
ZG-2 6-7/8(175)
4-3/4(120.7)
1(25.4)
75(34)
45
L
H
C
FR Vibration Dampers
Material: Damper: Ductile Iron Hardware: Aluminum Alloy Clamp & Keeper: Aluminum Alloy
CABLE DIA.RANGE
22.7(10.3)
16(7.3)
3.1(1.4)11.1(282)0.250-0.438
NET WEIGHT LBS(KGS)
FR-1
DIMENSIONS IN(mm)
(IN)CatalogNumber
0.439-0.858
1.131-1.425
1.426-1.770
(mm) L H C
6.35-11.12
11.12-21.8 16.1(409)
2.38(60)
2.75(70)
1.57(40)
1.77(45) 5.2(2.4)
0.859-1.130 21.8-28.7 20(508) 2.95(75) 2.26(60)
28.7-36.2 21.9(560) 3.74(95) 2.82(72)
36.2-44.9 24(610) 5.9(150) 3.54(90)
FR-2
FR-3
FR-4
FR-5
5.2(2.4)
46
FR Damper Installation Instructions FR1
47
FR
Damper Installation Instructions FR2
48
FR
Damper Installation Instructions FR3
49
FR
Damper Installation Instructions FR4
50
L
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
13''or 18''
1.618-1.776 (41-45)SD2X41-45
1.500-1.618 (38-41)SD2X38-41
1.382-1.500 (35-38)SD2X35-38
SD2X33-35 1.303-1.382 (33-35)
1.224-1.303 (31-33)SD2X31-33
1.146-1.224 (29-31)SD2X29-31
0.753-0.831 (19-21)SD2X19-21
SD2X26-29 1.028-1.185 (26-29)
SD2X23-26
SD2X21-23
0.910-1.028 (23-26)
0.832-0.910 (21-23)
0.673-0.753 (17-19)
INCHES(mm)CatalogNumber
Dimensions lnches
L
SD2X17-19
Spacer Damper – 2 Conductor Bundle
SD2
Material: Body and Clamps: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel
51
UP
L1L1
SD3 Spacer Damper – 3 Conductor Bundle
Material: Body and Keeper: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel
13'' or 18''
Dimensions lnches
L1
SD317-19-X
CatalogNumber INCHES(mm)
0.673-0.753 (17-19)
0.832-0.910 (21-23)0.910-1.028 (23-26)
SD321-23-X
SD323-26-X
1.028-1.185 (26-29)SD326-29-X
SD319-21-X 0.753-0.831 (19-21)
SD329-31X 1.146-1.224 (29-31)
SD331-33-X 1.224-1.303 (31-33)1.303-1.382 (33-35)SD333-35-X
SD335-38-X 1.382-1.500 (35-38)
SD338-41-X 1.500-1.618 (38-41)
SD341-45-X 1.618-1.776 (41-45)
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
13'' or 18''
52
L1
L2
13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
13''or 18'' 13''or 18''
L2(Y)
1.618-1.776 (41-45)SD4XY41-45
1.500-1.618 (38-41)SD4XY38-41
1.382-1.500 (35-38)SD4XY35-38
SD4XY33-35 1.303-1.382 (33-35)
1.224-1.303 (31-33)SD4XY31-33
1.146-1.224 (29-31)SD4XY29-31
0.753-0.831 (19-21)SD4XY19-21
SD4XY26-29 1.028-1.185 (26-29)
SD4XY23-26
SD4XY21-23
0.910-1.028 (23-26)
0.832-0.910 (21-23)
0.673-0.753 (17-19)
INCHES(mm)CatalogNumber
Dimensions lnches
L1(X)
SD4XY17-19 13''or 18''
Spacer Damper – 4 Conductor Bundle, 13”
SD4
Material: Body and Clamps: Aluminum Alloy Dampers: Elastomer Hardware: Galvanized Steel
53
12(50)(10) (25)(336)18/1 (17.4) (50)
DCDT-20812 336.4
556.5
556.5
397.5
397.5
336.4
336.4
397.5
DCDT-21023
DCST-21024
DCDT-21122
DCDT-210211
DCDT-20920
DCDT-21018
DCDT-20919
DCST-10917
DCDT-20815
DCDT-20914
DCDT-20813
20.52 1 2 140.846
(50)
(50)
(50)
(50)
(50)
(378)18/1 (22.3)
24/7 0.914(23.2)
14.9(378)
2
(21.8)
477 30/7 (22.4)0.879
0.883
477 26/7
477 24/7
0.858(21.5)
(378)
(413)14.9
16.3
2
2
14.9(356)
2
60(50)(13) (25)
0.52(13)
1 (25)
2(50)
60
(50) (25) (13)
0.52(15)0.62
(25) 1
1(101.5)
2
4
0.52(13)
1 (25)
2(50)
60
60
12
(50)
(50)
(50)
(50)
(50)
(50)
(336)(18.9)
30/7 (20.5)
18/1477 0.814(20.7)
26/7 (19.9)0.806
0.783
(378) 14(356)
2
(356)14.9
14
2
2
0.741
18/1
30/7
0.743(18.8)
26/7 0.72(18.3)
213.2
13.2(336)
2
13.2(336)
2
(50) (25) (10)
(50)(13) (25)0.52(13)
1 (25)
2(50)
0.52(13)0.52
(25) 1
1(50) 2
2
60
12
12
20.41 1
0.41(10)
1 (25)
2(50)
0.41(10)
1 (25)
2(50)
12
12
12
KCMIL
266.8
B
DCDT-20710
CatalogNumber
1.75
''(44
)
(50)
DIAMETEROUTSIDE
IN(mm)
26/7 (16.3)0.684
0.642
STRANDING AL/ST IN(mm)
(310)13.2
12.2
2
2
COMPRESSIONLENGTH BEFORE
A
0.41(10)0.41
(25) 1
1(50) 2
2
Dimensions lnches(mm)
B C L (TONS)
12
PRESS SIZE MINIMUM
A
C1.75''(44)L0.56''(14)DIA.BOLT HOLES
DCDT Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
54
DCDT Deadends
0.56''(14)DIA.BOLT HOLES
1.75
''(44
)
1.75''(44)
(50)
A
(50)
(50)
(50)
(50)
(50)
(50)
(50)
(50)
(50)
2(50) 2(50) 2(50) 2
666.6
666.6
715.5
715.5
DCDT-21138
DCDT-21239
DCDT-21136
DCDT-21137
DCDT-21234
24/7 1.036 16.3
(26.7)
(26.3)1.05126/7 17.2
(436)
(413)
(25.4)1.014(25.8)
24/7
26/7
30/19636.0(25.9) 1
1.019
(413)
(413)16.3
(436)16.3
17.2 2
216.30.95330/7556.5DCDT-21126
DCDT-21030
DCDT-21132
DCDT-21133
DCDT-21031
DCST-21128
DCDT-21127
(378)(23.6)36/1636.0
0.97724/7636.0
636.0 26/7 0.99(25.1)
(24.8)
18/1636.0(23.9)0.93
216.3
16.3(413)
(413) 2
(378)14.9 2
605.0 26/7 (24.5)0.93
0.966
605.0 24/7 0.953(24.2)
(24.2)
(413)14.9
16.3
2
2
16.3(413)
(413) 2
KCMIL
DCDT-21025
CatalogNumber DIAMETER
OUTSIDE
AL/ST
26/7556.5(23.5)0.927
STRANDING
IN(mm)
(378)14.9 2
COMPRESSIONLENGTH BEFORE
B
LC
A
60 1 0.62 3
1 (25)
(25)0.62 3(15) (76)
(15) (76)
60
(25) (15) (76)
(25) 1
(15) (76)0.62 3
(25) 1
1 (76)(15)
0.62 3
0.62 3
60
60
60
4 600.62 1
(50)60
(25) (13)
30.62 1
1 (25)
(25) 30.62
(15) (76)
(15) (76)
(25) 1
(13) (50)0.52 2
60
60
60
(101.5)
(101.5)
(101.5)
(25) 1
1(15)0.52 2
0.62 4
1 (25)
(25) 40.62
(15)
(15)
60
60
LCB
(25) 1
(13) (50)0.52 2
Dimensions lnches(mm)
(TONS)
60
PRESS SIZE MINIMUM
IN(mm)
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
55
DCDT Deadends
L 1.75''(44)
(32)
1.19654/7954.0DCDT-213511
DCDT-21455
DCDT-21454
1113.0
1033.5
DCDT-21353 1033.5
45/7
54/7 (31.6)1.259
1.245
45/7 1.212(30.8)
(30.4)
DCDT-21350 954.0
DCDT-21348
DCDT-21247
900.0
900.0
(29.5)
45/7 (29.6)1.165
54/7
45/7 (28.7)1.162
1.131
(76)(19)(63)(522) (30)
30.782.519.6 1.2 (30) 1.2
(30) 1.2
1.2 (30)(522)
20.6
20.6(63)2.5
2.5
19.6(496)
(496)2.5(63)
(63)
(19)0.78
0.78 (76) 3
3
0.78(19)
(19) 3 (76)
(76)
1 (25) 1.2 (30)
(30) 1.2
(63)(496)
(496)19.6
(63)2.5
(436)19.6
17.2(50)2.5
2
(76)(19)
(19)0.78
(76) 3
(15)0.78
0.62 (76) 3
3
60
60
60
60
60
60
60
COMPRESSIONLENGTH BEFORE
DIAMETERKCMILNumber
(27.7)
795.0DCDT-212451
DCDT-21346 795.0
DCDT-212441 795.0
1.10826/7
30/19 1.14(30)
(28.1)
54/7 (27.7)1.092
DCDT-212431
DCDT-21242
795.0
795.0
DCDT-21141 795.0
24/7
45/7 (27.0)1.092
1.063
IN(mm)
36/1
AL/ST
1.040(26.4)
STRANDINGCatalog OUTSIDEPRESS SIZE (TONS)
(76)(15)(50)(436) (25) 1 (25) 1 (25) 1.2 (30)
217.2
19.6(496)
(436)2.5(63)
(50)
(436)17.2
(50) 2
30.62
0.78(19)
(15) 3 (76)
(76)
(15)0.62
(76) 3
1 (25) 1
1 (25)(436)
17.2
17.2(50) 2
2
16.3(413)
IN(mm) 2(50)
A
(15)0.62
0.62 (76) 3
3
0.62(15)
B C
3 (76)
L
60
60
60
60
60
60
0.56''(14)DIA.BOLT HOLES
MINIMUM
1.75
''(44
)
Dimensions lnches(mm)
B
A
C
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
56
(101)(23) (30)(63)(621)(40.7)
DCDT-22075
DCDT-21974
76/19
76/19
2515.0
2312.0
DCDT-21973
DCDT-21972
DCDT-21871
84/192156.0
72/72167.0
72/72034.5
1.1 1.53.025.31.802
(729)(45.9)1.808(45.8)
28.7(643)
(27) (38)(76)
IN(mm)
1.5 (38)
3.0(76)
1.1(27)
25.31.762
1.735(44.1)
(44.8)25.3(643)
(643)
(42.7)1.681
(643)25.3
1.1 1.53.0
(38) 1.5 (38)
3.0(76)
(76)1.1(27)
(27)
(30) 1.2
(63)2.5
(23)0.94
4
(101) 4(101)
100
100
100 4
4(101)
(101)
100
(101) 4 100
Dimensions lnches(mm)
0.78 1.22.521.51.386
DCDT-21664 1431.0 54/19
DCDT-21769
DCDT-217681
DCDT-21667
84/19
54/19
1780.0
1590.0
45/71590.0
DCDT-21663
DCDT-21562
DCDT-21561
45/71431.0
54/19
45/7
1351.5
1351.5
1.465 23.5 2.5 1.2 0.94
24.41.545
1.602(39.2)
24.4(621)
1.504(38.2)
(37.2)23.5(596)
(596)
0.94 1.22.5
1.2 (30)
2.5(63)
0.94(23)
(30) 1.2 (30)
2.5(63)
(63)0.94(23)
(23)
(545)(36.2)
(36.2)1.427
(596)23.5
1.424(35.2)
21.5(545)
(19) (30)(63)
(30) 1.2
(63)2.5
(23)0.94
1.2 (30)
2.5(63)
0.78(19)
DIAMETEROUTSIDE
DCDT-21560
DCDT-215591
DCDT-21558
45/71272.0
54/191272.0
54/191192.5
DCDT-21457
DCDT-21456
NumberCatalog
45/7
54/19
1192.5
1113.0
AL/STSTRANDINGKCMIL
(19) (30)(63)(522)(33.1)
21.51.345
1.382(35.1)
(34.1)21.5(545)
(545)
(34)1.338
(545)21.5
0.78 1.22.5
(30) 1.2 (30)
2.5(63)
(63)0.78(19)
(19)
(30) 1.2
(63)2.5
(19)0.78
COMPRESSIONLENGTH BEFORE
20.61.293
1.302(32.8)
20.6(522)
0.78 1.22.5
1.2 (30)
2.5(63)
0.78(19)
A B C
3
3 60
4
4(101)
60
60
3 (76)
(76)
60
(76)
(76) 3 60
3 (76)
60
60
(76)
60 3
3 (76)
(76)
60
(76) 3 60
3
3 (76)
60
60
(TONS)PRESS SIZE MINIMUM
L
0.56''(14)DIA.BOLT HOLES
B
C
1.75
''(44
)
1.75''(44)L
A
IN(mm)
DCDT Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
57
DCAC Deadends
2(50) 2(50)
3 (76)
3 (76)
3 (76)
3 (76)
0.75(19)
0.75(19)
1 (25)
1 (25)
1 (25)
0.75(19)
0.75(19)
0.75(19)
2.8(71)2.8(71)
3.5(88)
3.5(88)
3.5(88)
2.8(71)
2.8(71)
2.8(71)
1.1 (28) 1.1 (28)
1.4 (35)
1.4 (35)
1.4 (35)
1.1 (28)
1.1 (28) 1.1 (28)
1.7(43)
1.7(43)
2.4(61)
2.4(61)
2.4(61)
1.7(43)
1.7(43)
1.7(43)
1 (25)
3.5(88)
1.4 (35)
2.4(61)
2(50) 2(50)
2(50) 2(50) 2(50) 2(50)
2(50)
2(50) 2(50)
2(50)
2(50)
2(50)
L
2.8(71)
0.75(19)
0.62(16)
0.62(16)
0.75(19)
0.62(16)0.62(16)
0.62(16)
2.9(73)2.9(73)2.9(73)
2.9(73)2.9(73)
2.9(73)
2.9(73)
1.1 (28) 1.1 (28)
1.1 (28)
1.1 (28)
1.1 (28) 1.1 (28)
1.1 (28)
1.7(43)
1.7(43)1.7(43)1.7(43)
1.7(43)1.7(43)
1.7(43)
0.62(16)
1.1 (28)
1.7(43)
DCAC-91031
DCAC-91030
DCAC-91128
DCAC-91127
DCAC-91126
DCAC-91025
DCAC-91024
DCAC-91023
DCAC-91122
DCAC-910211
DCAC-91020
DCAC-91019
DCAC-91018
DCAC-90817
DCAC-90815
DCAC-90814
DCAC-90813
B
LENGTH BEFORECOMPRESSION
IN(mm)
CatalogNumber
OUTSIDEDIAMETER IN(mm)
Dimensions lnches(mm)
A MAXADJUST
DCAC-90812
MINIMUMPRESS SIZE (TONS)
0.684(17.4)
19.3(491)
1.7(43)
1.1 (28)
2.9(73)
13.2(336)
0.72(18.3)
STRANDING AL/ST
KCMIL
18/1336.4
336.4 26/7
336.4 30/7 0.741(18.8)
13.2(336)13.2(336)
0.743(18.9)18/1397.5
397.5 26/7 0.783(19.9)
14(356)
397.5 30/7 0.806(20.5)
14.9(378)
477 18/1 0.814(20.7)
14(356)
477 24/7 0.846(21.5)
14(356)
477 26/7 0.858(21.8)
14.9(378)
477 30/7 0.883(22.4)
16.3(413)
556.5 18/1 0.879(22.3)
14.9(378)
556.5 24/7 0.914(23.2)
14.9(378)
556.5 26/7 0.927(23.5)
14.9(378)
556.5 30/7 0.953(24.2)
16.3(413)
605.0 24/7 0.953(24.2)
16.3(413)
605.0 26/7 0.966(24.5)
16.3(413)
636.0 36/1 0.93(23.6)
14.9(378)
636.0 18/1
DIA
12
12
12
12
12
60
12
12
60
60
60
60
60
60
60
60
60
60
0.62(16)
0.94(23.9)
14.9(378)
1.75'' 44L
1.75
''(44
)
A
DIAMAMENTX ADJUST
0.56''(14)DIA.BOLT HOLES
B
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
58
3 (76)
3 (76)
3 (76)
1 (25)
1 (25)
1 (25)
3.5(88)
3.5(88)
3.5(88)
1.4 (35)
1.4 (35)
1.4 (35)
2.4(61)
2.4(61)
2.4(61)
DCAC-91234
DCAC-91133
DCAC-91132
60
60
60636.0 24/7 0.977(24.8)
16.3(413)
636.0 26/7 0.99(25.1)
16.3(413)
636.0 30/19 1.019(25.9)
17.2(436)
3.5(88)
3.5(88)3.5(88)3.5(88)
3.5(88)3.5(88)
3.5(88)
3.5(88)3.5(88)
3.5(88)
3.5(88)
3.5(88)3.5(88)
3.5(88)
1.4 (35) 1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35) 1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35) 1.4 (35)
2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)
2.4(61)2.4(61)2.4(61)2.4(61)
2.4(61)2.4(61)
2.4(61)
3 (76)
1 (25)
3.5(88)
1.4 (35)
2.4(61)
DCAC-91353
DCAC-913511
DCAC-91350
DCAC-91348
DCAC-91247
DCAC-91346
DCAC-912451
DCAC-912441
DCAC-912431
DCAC-91242
DCAC-91141
DCAC-91239
DCAC-91138
DCAC-91137
DCAC-91136 24/7666.6 1(25.4)
16.3(413)
60
60
60
666.6 26/7 1.014(25.8)
16.3(413)
715.5 24/7 1.036(26.3)
16.3(413)
60
60
60
60
715.5 26/7 1.051(26.7)
17.2(436)
795.0 36/1 1.040(26.4)
16.3(413)
795.0 45/7 1.063(27.0)
17.2(436)
795.0 24/7 1.092(27.7)
17.2(436)
795.0 54/7 1.092(27.7)
17.2(436)
795.0 26/7 1.108(28.1)
17.2(436)
60
795.0 30/19 1.14(30)
19.6(496)
60
900.0 45/7 1.131(28.7)
17.2(436)
60
900.0 54/7 1.162(29.5)
19.6(496)
60
954.0 45/7 1.165(29.6)
19.6(496)
60
954.0 54/7 1.196(30.4)
19.6(496)
60
1033.5 45/7 1.212(30.8)
19.6(496)
60
60
MAXADJUST DIA L
KCMIL STRANDING AL/ST
MINIMUMPRESS SIZE (TONS)A
Dimensions lnches(mm)OUTSIDEDIAMETER IN(mm)
CatalogNumber
LENGTH BEFORECOMPRESSION IN(mm) B
1.75'' 44L
1.75
''(44
)
A
DIAMAMENTX ADJUST
0.56''(14)DIA.BOLT HOLES
B
3 (76)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76) 3 (76)
3 (76)
3 (76)
3 (76) 3 (76)
3 (76)
1 (25)
1 (25) 1 (25) 1 (25) 1 (25) 1 (25)
1 (25)
1 (25) 1 (25) 1 (25)
1 (25) 1 (25)
1 (25)
1 (25)
DCAC Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
59
2.4(61)
DCAC-92075
DCAC-91974
DCAC-91973
DCAC-91972
DCAC-91871
DCAC-91769
DCAC-917681
DCAC-91667
DCAC-91663
DCAC-91562
DCAC-91561
DCAC-91560
DCAC-915591
DCAC-91558
DCAC-91457
DCAC-91456
DCAC-91455
DCAC-91454 1033.5 54/7 1.245(31.6)
20.6(522)
60
1113.0 45/7 1.259(32)
20.6(522)
60
1113.0 54/19 1.293(32.8)
20.6(522)
60
1192.5 45/7 1.302(33.1)
20.6(522)
60
1192.5 1.338(34)
21.5(545)
6054/19
1272.0 1.345(34.1)
21.5(545)
6045/7
21.5(545)
601272.0 54/19 1.382(35.1)
1351.5 45/7 1.386(35.2)
21.5(545)
60
1351.5 1.424(36.2)
21.5(545)
6054/19
1431.0 1.427(36.2)
23.5(596)
6045/7
1590.0 1.504(38.2)
23.5(596)
6045/7
1590.0 1.545(39.2)
24.4(621)
6054/19
1780.0 1.602(40.7)
24.4(621)
6084/19
2034.5 1.681(42.7)72/7 100
2156.0 1.762(44.8)
25.3(643)
10084/19
25.3(643)
2167.0 72/7 1.735(44.1)
25.3(643)
100
2312.0 76/19 1.802(45.8)
25.3(643)
100
2515.0 76/19 1.808(45.9)
28.7(729)
100 4 (101)
4 (101) 4 (101) 4 (101)
4 (101)
4 (101)
4 (101)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76)
3 (76) 3 (76) 3 (76) 3 (76) 3 (76)
1.1 (28)
1.1 (28) 1.1 (28) 1.1 (28) 1.1 (28)
1.1 (28) 1.1 (28)
1.1 (28) 1.1 (28)
1 (25)
1 (25)
1 (25)
1 (25)
1 (25)
1 (25) 1 (25) 1 (25) 1 (25)
4.4(111)
4.4(111)4.4(111)4.4(111)4.4(111)
4.4(111)4.4(111)
4.4(111)
4.4(111)
2(50) 2(50)
2(50)
2(50)
1.6 (40)
1.6 (40) 1.6 (40)
1.6 (40)
1.6 (40)
3.5(88)3.5(88)
3.5(88)3.5(88)
3.5(88)3.5(88)3.5(88)3.5(88)3.5(88)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35)
1.4 (35) 1.4 (35)
3.1(79)3.1(79)
3.1(79)
3.1(79)
2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)
2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)2.4(61)
1.75'' 44L
1.75
''(44
)
A
DIAMAMENTX ADJUST
0.56''(14)DIA.BOLT HOLES
B
MAXADJUST DIA L
KCMIL STRANDING AL/ST
MINIMUMPRESS SIZE (TONS)A
Dimensions lnches(mm)OUTSIDEDIAMETER IN£ m̈m)
CatalogNumber
LENGTH BEFORECOMPRESSION IN(mm) B
DCAC Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
60
B
C
A
1.75
''(44
)
1.75'' 44
15¡ ã
L
0.56''(14)DIA.BOLT HOLES
4(101.5)
4(101.5)
4(101.5)
2(50) 2(50) 2(50)
4(101.5)
2(50) 2(50)
2(50)
2(50)
2(50)
2(50)
2(50) 2(50)
2(50)
60
60
60
60
60
60
60
60
12
12
60
12
12
12
12
12
2(50)
L
0.62(15)
1 (25)
2(50)
16.3(413)
0.966(24.5)26/7605.0DCST-11128
0.62(15)
1 (25)
2(50)
16.3(413)
0.953(24.2)24/7605.0DCST-11127
0.62(15)
1 (25)
2(50)
16.3(413)
0.953(24.2)30/7556.5DCST-11126
0.52(13)
1 (25)
2(50)
14.9(378)
0.927(23.5)26/7556.5DCST-11025
0.52(13)
2(50)
1 (25)
14.9(378)
0.914(23.2)24/7556.5DCST-11024
0.52(13)
1 (25)
2(50)
14.9(378)
0.879(22.3)18/1556.5DCST-11023
0.62(15)
1 (25)
2(50)
16.3(413)
0.883(22.4)30/7477DCST-11122
0.52(13)
1 (25)
2(50)
14.9(378)
0.858(21.8)26/7477DCST-110211
0.52(13)
1 (25)
2(50)
14(356)
0.846(21.5)24/7477DCST-10920
0.52(13)
1 (25)
2(50)
14(356)
0.814(20.7)18/1477DCST-10919
0.52(13)
1 (25)
2(50)
14.9(378)
0.806(20.5)30/7397.5DCST-11018
0.52(13)
1 (25)
2(50)
14(356)
0.783(19.9)26/7397.5DCST-10917
DCST-10815
DCST-10914
397.5 18/1 0.743(18.9)
13.2(336)
2(50)
1 (25)
0.41(10)
0.41(10)
1 (25)
2(50)
13.2(336)
0.741(18.8)30/7336.4
26/7336.4
336.4 18/1
26/7266.8
KCMIL STRANDING AL/ST
0.72(18.3)
0.41(10)
1 (25)
2(50)
13.2(336)
DCST-10813
0.41(10)
1 (25)
2(50)
13.2(336)
0.684(17.4)
DCST-10812
MINIMUMPRESS SIZE (TONS)
120.642(16.3)
0.41(10)
2(50)
DCST-10710
CA
Dimensions lnches(mm)OUTSIDEDIAMETER IN£ m̈m)
CatalogNumber
1 (25)
LENGTH BEFORECOMPRESSION IN(mm)
12.2(310)
B
DCST Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
61 100 4
(101)1.1(27)
1.5 (38)
3.0(76)
28.7(729)
1.808(45.9)76/192515.0DCST-12075
100 4(101)
1.1(27)
1.5 (38)
3.0(76)
25.3(643)
1.802(45.8)76/192312.0DCST-11974
100 4(101)
1.1(27)
1.5 (38)
3.0(76)
25.3(643)
1.735(44.1)72/72167.0DCST-11973
25.3(643)
84/19 100 4(101)
1.1(27)
1.5 (38)
3.0(76)
25.3(643)
1.762(44.8)
2156.0DCST-11972
100 4(101)
0.94(23)
1.2 (30)
2.5(63)72/7 1.681
(42.7)2034.5DCST-11871
84/19 60 4(101)
0.94(23)
1.2 (30)
2.5(63)
24.4(621)
1.602(40.7)
1780.0DCST-11769
54/19 60 4(101)
0.94(23)
1.2 (30)
2.5(63)
24.4(621)
1.545(39.2)
1590.0DCST-117681
45/7 60 3 (76)
0.94(23)
1.2 (30)
2.5(63)
23.5(596)
1.504(38.2)
1590.0DCST-11667
45/7 60 3 (76)
0.94(23)
1.2 (30)
2.5(63)
23.5(596)
1.427(36.2)
1431.0DCST-11663
54/19 60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
21.5(545)
1.424(36.2)
1351.5DCST-11562
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
21.5(545)
1.386(35.2)45/71351.5DCST-11561
1.382(35.1)54/191272.0DCST-11560 60 3
(76)0.78(19)
1.2 (30)
2.5(63)
21.5(545)
45/7 60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
21.5(545)
1.345(34.1)
1272.0DCST-115591
54/19 60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
21.5(545)
1.338(34)
1192.5DCST-11558
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
20.6(522)
1.302(33.1)45/71192.5DCST-11457
3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.019(25.9)30/19636.0DCST-11234
3 (76)
0.62(15)
1 (25)
2(50)
16.3(413)
0.99(25.1)26/7636.0DCST-11133
3 (76)
0.62(15)
1 (25)
2(50)
16.3(413)
0.977(24.8)24/7636.0DCST-11132
2(50)
2(50)
0.52(13)
1 (25)
2(50)
14.9(378)
0.93(23.9)
60
60
60
60
60
18/1636.0DCST-11031
2(50)
1 (25)
0.52(13)
14.9(378)
0.93(23.6)36/1636.0DCST-11030
B
LENGTH BEFORECOMPRESSION
CatalogNumber
OUTSIDEDIAMETER
Dimensions lnches(mm)
A C
MINIMUMPRESS SIZE (TONS)
STRANDING AL/ST
KCMIL L
B
C
A
1.75
''(44
)
1.75'' 44
15¡ ã
L
0.56''(14)DIA.BOLT HOLES
IN(mm)
DCST Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
62
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
20.6(522)
1.293(32.8)54/191113.0DCST-11456
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
20.6(522)
1.259(32)45/71113.0DCST-11455
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
20.6(522)
1.245(31.6)54/71033.5DCST-11454
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
19.6(496)
1.212(30.8)45/71033.5DCST-11353
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
19.6(496)
1.196(30.4)54/7954.0DCST-113511
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
19.6(496)
1.165(29.6)45/7954.0DCST-11350
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
19.6(496)
1.162(29.5)54/7900.0DCST-11348
60 3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.131(28.7)45/7900.0DCST-11247
60 3 (76)
0.78(19)
1.2 (30)
2.5(63)
19.6(496)
1.14(30)30/19795.0DCST-11346
60 3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.108(28.1)26/7795.0DCST-112451
3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.092(27.7)54/7795.0DCST-112441
3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.092(27.7)24/7795.0DCST-112431
3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.063(27.0)45/7795.0DCST-11242
3 (76)
0.62(15)
1 (25)
2(50)
16.3(413)
1.040(26.4)36/1795.0DCST-11141
3 (76)
0.62(15)
1 (25)
2(50)
17.2(436)
1.051(26.7)26/7715.5DCST-11239
60
60
60
60
3 (76)
0.62(15)
1 (25)
2(50)
16.3(413)
1.036(26.3)24/7715.5DCST-11138
3 (76)
0.62(15)
1 (25)
2(50)
16.3(413)
1.014(25.8)26/7666.6DCST-11137
60
60
60
3 (76)
0.62(15)
16.3(413)
B
LENGTH BEFORECOMPRESSION
IN(mm) 1 (25)
CatalogNumber
OUTSIDEDIAMETER
Dimensions lnches(mm)
A C
DCST-11136 2(50)
1(25.4)
60
MINIMUMPRESS SIZE
(TONS)STRANDING
AL/STKCMIL
666.6 24/7
L
B
C
A
1.75
''(44
)
1.75'' 44
15¡ ã
L
0.56''(14)DIA.BOLT HOLES
IN(mm)
DCST Deadends
Material: Body: Seamless Extruded Aluminum Alloy Tube Eye: Galvanized Steel Forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless Steel For ACSR Conductors
63
K
H
L
W
5/8'' 5/8''
W
H
L
TYPE PG TYPE DE
CAQS Deadends
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
2.7-4.2(1.22-1.90)
2.9-4.6(1.32-2.1)
WeightLbs(kg)
2.5-4.1(1.13-1.86)
2.0-3.6(0.9-1.6)
1.1-2.7(0.5-1.2)
1.2-2.2(0.54-1.0)
6-9/16(167)
11(279)
12-5/16 (313)
1-1/16 (27)
25/32 (19.8)
10,000 (44)
7 (178)
6-7/16(163.5)
4-3/4(121)
8,000 (33)
3-13/16 (97)
3-7/8 (98)
CAQS-46DE
KHL
Dimensions lnches(mm)CatalogNumber
11/16 (17.5)
4-1/16 (103)
0.18-0.52(4.57-13.21)
0.46-0.73(11.68-18.54)
W
5-1/2(140)
5-5/16(135)
7/8 (22.1)
CAQS-46PG 8,000 (33)
0.18-0.52(4.57-13.21)
11/16 (17.5)
1 (25.4)
11/16 (17.5)
1 (25.4)
15,000 (67)
CAQS-57PG
CAQS-70PG 1-1/8 (28.6)
15,000 (67)
CAQS-86PG
0.25-0.57(6.35-14.48)
1-1/4 (32)
CAQS-86PGL
CAQS-100PG 18,000 (80)
0.50-1.0(12.7-25.4)
9-7/8(250)
1-3/16 (30)
9-5/16(237)
1-1/4 (32)
4.5-6.2(2.04-2.81)
15,000 (67)
0.52-0.88(13.21-22.35)
1-1/16 (27)
7-7/16(189)
1 (25.4)
0.18-0.52(4.57-13.21)
Clamp Ranging INCHES (mm)
Ultimate BodyStrengthLbs(kN)
64
L
H
W
15/1
6 5/8 5/8
15/1
6H
W
L
C
TYPE CAQS TYPE CAQSS
5(127)
12-3/4(324)
W
0.365-0.574(9.27-14.58)
1.411-1.632(35.84-41.45)
1.150-1.412(29.21-35.86)
0.811-1.152(20.60-29.26)
10-1/2(267)
1 (25.4)
CatalogNumber
Dimensions lnches(mm)
L H C
CAQS-15-1100 9-1/8(232)
3-7/8(98)
15,000 (67)
4-3/8(111)
8-1/16 (205)
3-5/32 (80)
0.574-0.831(14.58-20.65)0.811-1.152(35.83-41.45)1.150-1.412(29.21-35.86)
15,000 (67)15,000 (67)8,000 (36)10,000 (44)15,000 (67)15,000 (67)
CAQS-15-1150
CAQS-15-1200
CAQSS-8-2025
CAQS-15-2050
CAQS-15-2100
CAQS-15-2150
1 (25.4) 1
(25.4) 1
(25.4)
1 (25.4)
1 (25.4)
1 (25.4)
8-3/4(222)
3-1/4(83)
9-1/8(232)
3-7/8(98)
10-1/2(267)
4-3/8(111)
15,000 (67)
1.411-1.630(35.84-41.40)
CAQS-15-2200 10-1/2(267)
1 (25.4)
5(127)
21/32(16.7) 7/8(22.2)1-3/16(30.2)1-21/32(42.1)2-3/32(53.2)
3.5-5.2(1.59-2.36)
5.2-6.9(2.3-3.2)6.0-7.7(2.7-3.5)2.7-4.4(1.2-2.0)
WeightLbs(kg)
3.5-5.2(1.6-2.4)
7.5-9.2(3.4-4.2)8.5-10.2(3.9-4.6)
4.2-5.9(1.9-2.7)
Ultimate BodyStrengthLbs(kN)
Clamp RangingINCHES(mm)
CAQS Deadends
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
65
PD
W
L
H
K
R
1-1/2(38)
1-7/8 (48)
17(432)
W
0.642-0.879(16.3-22.32)
0.502-0.562(12.75-14.27)
0.398-0.447(10.03-11.35)
13-1/8 (333)
5/8(16)
PD
1-1/16 (27)
CatalogNumber
Dimensions lnches(mm)
L H C K
CADGS-286 11-1/4 (286)
9-5/8(244)
1-1/4(32)
7-3/8(187)
12-3/8(315)
25,000 (111)
1-3/8(35)
11-1/2(292)
8-1/4(210)
3/4(19)
CADGS-2112 25,000(111)30,000(133)50,000(222)30,000(133)CADGS-2185
3.1-4.8(1.4-2.6)
WeightLbs(kg)
4.5-6.5(2.1-3.0)5.5-7.2(2.5-3.3)
R
5(127)6-1/2(165) 12(305)
1-3/8(35)
18(457)
1(25.4)
Ultimate BodyStrengthLbs(kN)
Clamp RangingINCHES(mm)
CADGS Deadends
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
66
L
W
H
C
PD
K
9-1/2(241)
11-1/2(292)
13-1/8 (333)
5/8(15.9)
6-1/2(165)
8-3/8(213)
15/16(24)
25,000 (111)
15,000 (67)
7-3/8(187)
1-3/8(35)
5-1/8(130)
1-1/4(32)
6-3/4(171)
9-1/16 (230)
CAQS-57
WeightLbs(kg)KCHL
Dimensions lnches(mm)CatalogNumber
3/4 (19)
PD
5/8(16)
10-1/4 (260)
3.1-4.8(1.4-2.6)
CAQS-70 20,000 (89)
CAQS-86
CAQS-112
CAQS-130
25,000(111)30,000(133)25,000(111)30,000(133)35,000(156)
50,000 (222)CAQS-185
CAQS-15525,000(111)30,000(133)35,000(156)
0.20-0.64(5.08-16.26) 0.30-0.75(7.62-19.05) 0.46-0.94(10.16-23.88) 0.50-1.2(12.88-30.48)
0.70-1.39(17.78-35.3)
1.18-1.55(29.97-38.61)
1.30-1.85(33.02-46.99)
W
1-1/4(32)
4.5-6.5(2.1-3.0)
1-3/8(34)
5.5-7.2(2.5-3.3)8.5-10.6(3.9-4.84)
13.4-15.7(6.1-7.2)
15.6-17.8(7.1-8.1)
21.3-22.5(9.67-10.2)
14(356)
1-7/16(36.5)
13-1/8(333)
1-1/2(38)
3/4(19.1)
11-1/4 (285)
1-1/16 (27)
9-5/8(244)
1-1/4(32)
5/8(15.9)
8-1/4(210)
3/4(19.1)
15-1/2(394)
2(51)
15-3/4(400)
12-3/8(215)
1-1/2(38)
3/4(19.1)
17(432)
2(51)
18(457)
12-3/8(215)
1-1/2(38)
1(25.4)
Ultimate BodyStrengthLbs(kN)
Clamp RangingINCHES(mm)
CAQS Deadends
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
67
15¡ ã
0.56(1
4)
LEN
GTH
BE
FOR
E C
OM
PRES
SIO
N
1.1(28)
1.75(44)
JTAT Jumper Terminals
Material: Body: Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy Including: Bolts, Nuts & Washers
SHIELD WIRE DATA
0.57(0.26)607.8(200)
0.40(0.18)
0.27(0.12)7.4(188)
0.18(0.08)127.2(180)0.306-0.313
NET WEIGHTLENGTH IN (MM)
JTAT-10
MINIMUMPRESS(TONS)O.D(IN)
CatalogNumber
JTAT-12
JTAT-14
JTAT-16
JTAT-12
0.343-0.375
0.385-0.392
0.417-0.438
0.486-0.500
7.6(193)
7.6(193) 60
60
60
0.38(0.17)
LBS(KGS)
68
1.1(28)
0.56(14)
1.75
(44)
LEN
GTH
BE
FOR
E C
OM
PR
ES
SIO
N
JTST Jumper Terminals
Material: Body : Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy Including: Bolts, Nuts and Washers
0.38(0.17)
60
60
607.6(193)
7.6(193)
0.486-0.500
0.417-0.438
0.385-0.392
0.343-0.375
JTST-12
JTST-16
JTST-14
JTST-12
CatalogNumber O.D(IN)
MINIMUMPRESS(TONS)
JTST-10
LENGTH IN (MM)
NET WEIGHT
0.306-0.313 7.2(180) 12 0.18(0.08)
7.4(188) 0.27(0.12)
0.40(0.18)
7.8(200) 60 0.57(0.26)
SHIELD WIRE DATA
LBS(KGS)
69
LEN
GTH
BE
FOR
E C
OM
PRES
SIO
N
1.75
(44)
1.75(44)
? 0.56(14)
1.75
(44)
? 0.56(14)
PAD WIDTH PAD WIDTH
CONDUCTOR RANGE
7.1(3.2)10018.4(467)4(102)4(102)2500
1.806-1.9001.662-1.710
6.1(2.8)10017.8(452)4(102)4(102)2000-2300
1.630-1.8051.504-1.608
4.7(2.1)6016.5(419)4(102)4(102)1750-1900
1.521-1.6151.385-1.455
3.9(1.7)6015.9(404)4(102)3.0(76)1590-1700
1.426-1.5201.290-1.382
3.1(1.4)6014.6(371)4(102)3.0(76)1351.5-1510.5
1.331-1.4251.212-1.300
2.7(1.2)6014(356)4(102)3.0(76)1192.5-1300
1.236-1.3301.125-1.196
2.2(0.99)6013.4(340)4(102)3.0(76)1000-1113
1.140-1.2351.046-1.018
1.8(0.81)6012.7(323)4(102)3.0(76)795-954
1.026-1.1310.960-1.010
1.5(0.68)6012.1(307)4(102)3.0(76)700-800
0.950-1.0450.880-0.930
1.1(0.49)6011.4(290)2.2(56)2(51)556.5-650
0.856-0.9500.789-0.858
0.8(0.36)1210.4(264)2.2(56)2(51)450-550
0.766-0.8550.702-0.766
JTSP-19
JTSP-20
JTSP-15
JTSP-16
JTSP-17
JTSP-11
JTSP-12
JTSP-13
JTSP-14
JTSP-09
JTSP-10
0.6(0.27)129.8(249)1.7(43)2(51)397.5-400
0.680-0.7650.630-0.695
0.4(0.18)129.2(234)1.7(43)2(51)300-350
0.595-0.6790.547-0.611
JTSP-08
NET WEIGHT LB(KG)
LENGTH IN (MM)
PAD WIDTH IN(MM)
HOLES
JTSP-07
MINIMUMPRESS(TONS)AAC SIZE KCMIL
O.D.(IN).StdCond/
Compact/TW
CatalogNumber
JTSP Jumper Terminals
Material: Body: Seamless extruded Aluminum Alloy tube Hardware: Aluminum Alloy Including: Bolts, Nuts and Washers
70
PAD WIDTH
PAD WIDTH
1.75(44)
? 0.56(14)1.75(44)
1.75(44)LEN
GTH
BE
FOR
E C
OM
PRES
SIO
N
?0.56(14)
15¡ ã
JTAP Jumper Terminals
Material: Body: Seamless Extruded Aluminum Alloy Tube Hardware: Aluminum Alloy or Stainless steel For EHV application, the surface are round corner, without sharp edge, ect…
CatalogNumber
O.D.(IN).StdCond/
Compact/TWAAC SIZE KCMIL
MINIMUMPRESS(TONS)
JTAP-07
PAD WIDTH IN(MM) HOLES
LENGTH IN (MM)
NET WEIGHT LBS(KGS)
JTAP-08
0.595-0.6790.547-0.611 300-350
1.7(43)2(51) 9.2(234) 12 0.4(0.18)
0.680-0.7650.630-0.695 397.5-400
1.7(43)2(51) 9.8(249) 12 0.6(0.27)
JTAP-10
JTAP-09
JTAP-14
JTAP-13
JTAP-12
JTAP-11
JTAP-17
JTAP-16
JTAP-15
JTAP-20
JTAP-19
0.766-0.8550.702-0.766 450-550
2.2(56)2(51) 10.4(264) 12 0.8(0.36)
0.856-0.9500.789-0.858 556.5-650
2.2(56)2(51) 11.4(290) 60 1.1(0.49)
0.950-1.0450.880-0.930 700-800
4(102)3.0(76) 12.1(307) 60 1.5(0.68)
1.026-1.1310.960-1.010 795-954
4(102)3.0(76) 12.7(323) 60 1.8(0.81)
1.140-1.2351.046-1.018 1000-1113
4(102)3.0(76) 13.4(340) 60 2.2(0.99)
1.236-1.3301.125-1.196 1192.5-1300
4(102)3.0(76) 14(356) 60 2.7(1.2)
1.331-1.4251.212-1.300 1351.5-1510.5
4(102)3.0(76) 14.6(371) 60 3.1(1.4)
1.426-1.5201.290-1.382 1590-1700
4(102)3.0(76) 15.9(404) 60 3.9(1.7)
1.521-1.6151.385-1.455 1750-1900
4(102)4(102) 16.5(419) 60 4.7(2.1)
1.630-1.8051.504-1.608 2000-2300
4(102)4(102) 17.8(452) 100 6.1(2.8)
1.806-1.9001.662-1.710 2500
4(102)4(102) 18.4(467) 100 7.1(3.2)
CONDUCTOR RANGE
71
J
A
LH
5/8'
'
W
CAC Suspension Clamp - Standard
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless Steel
9.0-11.3(4.08-5.13)
6.0-8.0(2.72-3.63)
4.9-6.9(2.22-3.1)
4.2-6.2(1.9-2.8)
3.8-5.6(1.72-2.54)
3.5-5.3(1.59-2.4)
3.2-5.0(1.45-2.27)
2.8-4.5(1.27-2.0)
2.5-4.2(1.13-1.9)
5/8(15.9)
1/2(12.7) 5/8(15.9)
1/2(12.7) 1/2(12.7) 1/2(12.7) 1/2(12.7)
1/2(12.7) 1/2(12.7)
4-1/4(108)
3-5/8(92)
3-17/32 (90)
3-11/64 (80.6)
3-5/64 (78)
3-1/8(79.4)
3 (76)
2-3/4 (70)
2-3/4 (70)
2-11/16 (68)
2-1/4 (57)
2-11/64 (55)
1-15/16 (49)
1-13/16 (46)
1-9/16 (39.7)
1-17/32 (39)
1-11/32 (34)
1-5/32(29.4)
12(305)
10-1/2 (267)
10-1/2(267)
10(254)
9-1/2(241)
9-3/16(233)
8-7/8(225)
8(203)
8-1/8(206)
25¡ ã
2.00-2.52(50.80-64.01)
1.40-2.13(35.56-54.10)
1.40-2.04(35.56-51.82)
1.25-1.82(31.75-46.23)
1.10-1.62(27.94-41.15)
1.00-1.47(25.40-37.34)
0.90-1.39(22.86-35.31
30,000 (133)
25,000 (111)
25,000 (111)25,000 (111)25,000 (111)
25,000 (111)25,000 (111)
25,000 (111)
CAC-30-252
CAC-25-213
CAC-25-204
CAC-25-182
CAC-25-162
CAC-25-147
CAC-25-139
CAC-25-118
CAC-25-104
CAC-18-85 2.1-3.8(0.95-1.7)
1/2(12.7)
2-9/16 (65)
15/16 (23.8)
7-1/2(191)
22¡ ã
17.5¡ ã
22.5¡ ã
22.5¡ ã
22.5¡ ã
20.5¡ ã
22.5¡ ã
30¡ ã
30¡ ã
30¡ ã
A
25,000 (111)
17,000 (76)
1/2(12.7)
2-9/32 (58)
6-3/4(171)CAC-17-62
WeightLbs(kg)JHL
Dimensions lnches(mm)Ultimate BodyStrengthLbs(kN)
CatalogNumber
29/32 (23)
1.9-3.5(0.86-1.6)
18,000 (80)
0.20-0.64(5.08-16.26) 0.40-0.85(10.16-21.59) 0.50-1.04(12.70-26.42) 0.70-1.18(17.78-29.97)
W
Clamping Ranging INCHES(mm)
72
15¡ ã-
35¡ ã J
HPD W
L
6.0(2.7)7.9(3.6)8.0(3.6)
5.6(2.6)7.4(3.4)7.6(3.5)
4.8(2.2)6.6(3.0)6.8(3.1)
3/4(19)
3/4(19)
3/4(19)
5/8(15.9)
1/2(12.7)
1/2(12.7)
3-3/4 (95)
3-1/2 (89)
3-1/2 (89)
2-1/4 (57)
2-11/64 (55)
2-1/32(51.6)
11-1/4 (286)
11-1/4 (286)
10-1/8 (257)
CAA-25C-213CAA-30S-213CAA-40-213 1.81-2.13
(45.97-54.1)
40,000(178)30,000(133)25,000(111)
CAA-40-204CAA-30S-204 1.73-2.04
(43.94-51.82)
40,000(178)30,000(133)25,000(111)CAA-25C-204
1.55-1.82(39.37-46.23)
40,000(178)30,000(133)25,000(111)
CAA-40-182CAA-30S-182CAA-25C-182
1/2(12.7)
3.6(1.6)5.0(2.3)5.3(2.4)
5/8(15.9)
3-1/4(82.5)
1-11/16 (43)
9-3/4(248)
1.25-1.47(31.75-37.34)
35,000(156)30,000(133)25,000(111)
CAA-35-147CAA-30S-147CAA-25C-147
CAA-25C-118CAA-30S-118
5/8(15.9)
PD
1-9/32(32.5)
9-7/8(251)
W
1.0-1.18(25.4-29.97)
Clamp RangingINCHES(mm)
3.6(1.6)5.0(2.3)5.3(2.4)
CatalogNumber
Ultimate BodyStrengthLbs(kN)
Dimensions lnches(mm)
L H JWeightLbs(kg)
CAA-35-118 2-3/4 (70)
1/2(12.7)
35,000(156)30,000(133)25,000(111)
CAA Suspension Clamp - Standard Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
73
J PD
W
AL
H
CACFL Suspension Clamp - Standard
5/8(15.9)
5/8(15.9)
5/8(15.9)
5/8(15.9)
6.5(2.95)8.3(3.76)8.5(3.86)
5.5(2.49)7.2(3.27)7.0(3.31)
CACFL-25-182CACFL-25S-182CACFL-25C-182
25,000 (111)
17.5¡ ã
17.5¡ ã 1/2(12.7)
25,000 (111)
CACFL-25-162CACFL-25S-162CACFL-25C-162
5.2(2.36)6.9(3.13)7.0(3.17)
17.5¡ ã25,000 (111)
CACFL-25-147CACFL-25S-147CACFL-25C-147
4.7(2.13)6.4(2.90)6.5(2.94)
25,000 (111)
CACFL-25-139CACFL-25S-139CACFL-25C-139
3-1/4 (83)
1-31/32 (50)
14(356)
1/2(12.7)
1/2(12.7)
1.55-1.82(39.37-46.23)
1/2(12.7)
17.5¡ ã
A
25,000 (111)
1/2(12.7)
2-1/2(63.5)
CACFL-25-118CACFL-25S-118CACFL-25C-118
WeightLbs(kg)JHL
Dimensions lnches(mm)Ultimate BodyStrengthLbs(kN)
CatalogNumber
4.0(1.81)5.4(2.45)5.7(2.59)
1.0-1.18(25.4-29.97)
1.18-1.39(29.97-35.31)
1.25-1.47(31.75-37.34)
1.38-1.62(49.02-57.66)
W
MAX.TAKE-OFF ANGLE
17.5¡ ã
10(254)
10-1/2(267)
11(279)
12(305)
1-5/16(33.4)
1-17/32 (39)
1-5/8(41.3)
1-3/4(44.5)
2-7/8(73)
3-3/16 (81)
3-1/4 (83)
PD
5/8(15.9)
Clamp RangingINCHES(mm)
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
74
H
L A
W
PD
J
4.5(2.04)6.3(2.86)6.3(2.86)5.0(2.27)6.8(3.08)6.8(3.08)
CACF-25-204CACF-25S-204CACF-25C-204
6.2(2.81)8.0(3.63)8.0(3.63)
25,000 (111)CACF-25C-213
CACF-25-213CACF-25S-213
6.7(3.04)8.6(3.90)9.0(4.08)
CACF-25-227CACF-25S-227CACF-25C-227
3/4(19)
3/4(19)
5/8(15.9)
5/8(15.9)
5/8(15.9)
PD
CACF-36-280
CACF-25C-280CACF-30S-280
11.4(5.17)14.3(6.46)14.4(6.51)
5/8(15.9)
5/8(15.9)
5/8(15.9)
5-1/32(128)
4(102)
3-5/8(92)
3-1/2(89)
3 (76)
2-3/8(60.3)
2-5/16(58.7)
2-7/32(56.5)
2-1/16(52.4)
14(356)20¡ ã36,000(160)
25,000(111)30,000(133) 2.29-2.80
(58.17-71.12)
11(279)
11(279)
10-1/2(267)
10(254)
17.5¡ ã
17.5¡ ã
17.5¡ ã
MAX.TAKE-OFF ANGLE
25,000 (111)
W
1.93-2.27(49.02-57.66)
1.80-2.13(45.72-54.1)
1.73-2.04(43.94-51.82)
1.55-1.82(39.4-46.2)
Clamp RangingINCHES(mm)
CatalogNumber
Ultimate BodyStrengthLbs(kN)
Dimensions lnches(mm)
L H JWeightLbs(kg)
CACF-25-182CACF-25S-182CACF-25C-182
3-1/4(82.5)
1/2(12.7)25,000
(111)
A
17.5¡ ã
1/2(12.7)
25,000 (111)
CACF Suspension Clamp - Standard
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
75
H
L
15¡ã
20¡ ã
19/3
2'' D
IA
J
1/2(12.7)
1/2(12.7)
1/2(12.7)
1.50-2.00 (38.1-50.8)
1/2(12.7)
28,00 (12)
1/2(12.7)
CAT-2-57
WeightLbs(kg)JL
Dimensions lnches(mm)CatalogNumber
0.42(0.19) 0.25-0.57 (6.3-14.4) 0.35-0.86 (8.8-21.8) 0.50-1.06 (12.7-26.9) 1.00-1.50 (25.4-38.1)
W
5-1/4(133)
3-7/8(98)
CAT-2-86
CAT-2-106
CAT-2-105
CAT-2-200
28,00 (12)
28,00 (12)
28,00 (12)
28,00 (12)
0.45(0.20)
0.62(0.28)
0.64(0.29)
0.75(0.34)
5-1/4(133)5-1/4(133)
5-1/4(133)
5-1/4(133)
3-7/8(98)
3-7/8(98)
3-7/8(98)
3-7/8(98)
Ultimate BodyStrengthLbs(kN)
Clamp RangingINCHES(mm)
CAT Suspension Clamp - Standard
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless steel
76
L
SDE ACSS Dead End Clamp
Single Tongue Deadend Assembly Catalog
Number
ACSS Conductor #PAD Bolts
Dimension (IN.) (L Before Compression)
Code Word KCMIL
Strand AL/STL L A B C
SDE2668-1 Partidge 266.8 26/7 2 19.3 2.50 1.00 0.49
SDE2668-2 Junco 266.8 30/7 2 19.9 2.50 1.00 0.49
SDE300-1 Ostrich 300.0 26/7 2 19.9 2.50 1.00 0.49
SDE3364-1 Linnet 336.4 26/7 2 20.7 2.50 1.00 0.49
SDE3364-2 Oriole 336.4 30/7 2 20.7 2.50 1.00 0.49
SDE3975-1 Brant 397.5 24/7 2 23.2 2.50 1.00 0.49
SDE3975-2 Ibis 397.5 26/7 2 23.2 2.50 1.00 0.49
SDE3975-3 Lark 397.5 30/7 2 23.2 2.50 1.00 0.49
SDE447-1 Flicker 477.0 24/7 2 24.2 2.50 1.00 0.49
SDE447-2 Hawk 477.0 26/7 2 24.3 2.50 1.00 0.55
SDE447-3 Hen 477.0 30/7 2 24.7 2.62 1.24 0.67
SDE5565-1 Parakeet 556.5 24/7 2 25.0 2.50 1.00 0.55
Material: Body : Seamless extruded Aluminum Alloy Tube Eye: Galvanized steel forged Terminal: Seamless extruded Aluminum Alloy Tube Hardware: Stainless steel
77
SDE Table of ACSS Compression Deadend
Single Tongue Deadend Assembly Catalog
Number
ACSS Conductor #PAD Bolts
Dimension (IN.) (L Before Compression)
Code Word KCMIL
Strand AL/STL L A B C
SDE5565-2 Dove 556.5 26/7 4 26.1 2.62 1.24 0.67
SDE5565-3 Eagle 556.5 30/7 4 26.1 2.62 1.24 0.67
SDE605-1 Peacock 605.0 24/7 4 25.7 2.50 1.00 0.55
SDE605-2 Squab 605.0 26/7 4 26.1 2.62 1.24 0.67
SDE605-3 Wood Duck 605.0 30/7 4 26.1 2.62 1.24 0.67
SDE605-4 Teal 605.0 30/19 4 26.1 2.62 1.24 0.67
SDE636-1 Rook 636.0 24/7 4 26.1 2.50 1.00 0.55
SDE636-2 Grosbeak 636.0 26/7 4 26.1 2.62 1.24 0.67
SDE636-3 Scoter 636.0 30/7 4 25.7 2.62 1.24 0.67
SDE636-4 Egret 636.0 30/19 4 25.7 2.62 1.24 0.67
SDE666-1 Flamingo 666.0 24/7 4 26.1 2.50 1.24 0.55
SDE666-2 Gannet 666.0 26/7 4 27.4 2.62 1.00 0.67
SDE7155-1 Stilt 715.5 24/7 4 27.4 2.62 1.24 0.67
SDE7155-2 Starling 715.5 26/7 4 27.4 2.62 1.24 0.67
SDE7155-3 Redwing 715.5 30/19 4 27.4 2.62 1.24 0.67
SDE795-1 Tem 795.0 45/7 4 27.4 2.62 1.24 0.67
SDE795-2 Cuckoo 795.0 24/7 4 27.4 2.62 1.24 0.67
SDE795-3 Condor 795.0 54/7 4 27.4 2.62 1.24 0.67
SDE795-4 Drake 795.0 26/7 4 28.0 2.62 1.24 0.67
SDE795-5 Mallard 795.0 30/19 4 28.0 2.62 1.24 0.67
SDE900-1 Ruddy 900.0 45/7 4 28.0 2.62 1.24 0.67
SDE900-2 Canary 900.0 54/7 4 28.0 2.62 1.24 0.67
SDE954-1 Rail 954.0 45/7 4 28.0 2.62 1.24 0.67
78
SDE Table of ACSS Compression Deadend
Single Tongue Deadend Assembly Catalog
Number
ACSS Conductor #PAD Bolts
Dimension (IN.) (L Before Compression)
Code Word KCMIL Strand AL/STL L A B C
SDE954-2 Towhee 954.0 48/7 4 28.0 2.62 1.24 0.67
SDE954-3 Cardinal 954.0 54/7 4 28.0 2.62 1.24 0.67
SDE954-4 Canvasback 954.0 30/19 4 31.4 2.62 1.24 0.94
SDE10335-1 Ortolan 1033.5 45/7 4 29.9 2.62 1.24 0.78
SDE10335-2 Curlew 1033.5 54/7 4 30.1 2.62 1.24 0.78
SDE1113-1 Bluejay 1113.0 45/7 4 30.1 2.62 1.24 0.78
SDE1113-2 Finch 1113.0 54/19 4 31.0 2.62 1.24 0.78
SDE11925-1 Bunting 1192.5 45/7 4 31.0 2.62 1.24 0.78
SDE11925-2 Grackle 1192.5 54/19 4 31.0 2.62 1.24 0.78
SDE1272-1 Bittern 1272.0 45/7 4 31.8 2.62 1.24 0.78
SDE1272-2 Pheasant 1272.0 54/19 4 32.1 2.62 1.24 0.94
SDE13515-1 Dipper 1351.5 45/7 4 31.8 2.62 1.24 0.78
SDE13515-2 Martin 1351.5 54/19 4 33.9 2.62 1.24 0.94
SDE1431-1 Bobolink 1431.0 45/7 4 33.9 2.62 1.24 0.94
SDE1431-2 Plover 1431.0 54/19 4 33.9 2.62 1.24 0.94
SDE15105-1 Nuthatch 1510.5 45/7 4 33.9 2.62 1.24 0.94
SDE15105-2 Parrot 1510.5 54/19 4 34.9 2.62 1.24 0.94
SDE1590-1 Lapwing 1590.0 45/7 4 34.9 2.62 1.24 0.94
SDE1590-2 Falcon 1590.0 54/19 4 34.9 2.62 1.24 0.94
SDE1780-1 Chukar 1780.0 84/19 4 35.8 2.62 1.24 0.94
SDE2057-1 Roadrunner 2057.0 76/19 4 35.8 2.62 1.24 0.94
SDE2156-1 Bluebird 2156.0 84/19 4 39.0 3.00 1.50 1.08
SDE2312-1 Thrasher 2312.0 76/19 4 39.0 3.00 1.50 1.08
79
B
A
C
PD
J
Material: Body and Keeper: Aluminum Alloy Hardware: Galvanized Steel Cotters and Pin: Stainless Steel
HTSC ACSS Suspension Clamp
See table on next page for details on ACSS Suspension Clamps
80
HTSC Table of ACSS Suspension Clamp
Catalog Number
Fitting Clamping Range Inches (mm)
Ultimate Strength LBS(kN)
Max. Take Off
Angle (deg.)
Dimensions Inches (mm) Approx
WT. Each LBS.(KG) Type A B C PD J
HTSC-1 None
1.00-1.20 (25.40-30.48)
25000 (111)
17.5 9.15 (232.
4)
2.52 (64.0)
1.42 (36.0)
0.62 (15.8
8)
0.50 (12.7)
5.0(2.7)
HTSC-2 Socket 25000 (111) 7.1(3.22)
HTSC-3 Clevis 25000 (111) 7.1(3.22)
HTSC-4 None
1.18-1.39 (29.97-35.31)
25000 (111)
17.5 9.45 (240.03)
3.00 (76.2)
1.63 (41.4)
0.62 (15.8
8)
0.50 (12.7)
5.6(2.54)
HTSC-5 Socket 25000 (111) 7.6(3.44)
HTSC-6 Clevis 25000 (111) 7.6(3.44)
HTSC-7 None
1.55-1.82 (39.37-46.23)
30000 (133)
17.5
10.19
(258.83)
3.34 (84.8
4)
2.03 (51.5
6)
0.62 15.88)
0.50 (12.7)
6.96(3.13)
HTSC-8 Socket 30000 (133) 9.0(4.08)
HTSC-9 Clevis 25000 (111) 9.0(4.08)
HTSC-10 None
1.80-2.13 (45.72-54.1)
30000 (133)
17.5
11.75
(298.45)
3.62 (91.9
5)
2.39 (60.7
0)
0.62 (15.8
8)
0.50 (12.7)
8.9(4.04)
HTSC-11 Socket 30000 (133) 10.7(4.86)
HTSC-12 Clevis 25000 (111) 10.7(4.86)
HTSC-13 None
2.14-2.52 (54.36-64.01)
30000 (133)
17.5
12.75
(323.85)
4.02 (102.
1)
2.79 (70.8
7)
0.62 (15.8
8)
0.50 (12.7)
11.0(5.0)
HTSC-14 Socket 30000 (133) 12.9(5.86)
HTSC-15 Clevis 25000 (111) 13.3(6.04)
81
ALUMINUM BOOYFILLER PLUGSTEEL SLEEVE
L
MSJ ACSS Splice Sleeve
Catalog Number ACSS Conductor Dimension (IN.) (L Before
Compression)
Code Word KCMIL Strand AL/STL Full Tension Loop Splice
MSJ-2268-1 Partidge 266.8 26/7 24.5 16.1
MSJ-300-1 Ostrich 300.0 26/7 23.2 14.8
MSJ-3364-1 Linnet 336.4 26/7 24.5 16.1
MSJ-3364-2 Oriole 336.4 30/7 25.0 16.1
MSJ-3975-1 Brant 397.5 24/7 27.0 18.1
MSJ-3975-2 Ibis 397.5 26/7 27.0 18.1
MSJ-3975-3 Lark 397.5 30/7 27.0 18.1
MSJ-477-1 Flicker 477.0 24/7 30.2 20.1
MSJ-477-2 Hawk 477.0 26/7 30.2 20.1
MSJ-477-3 Hen 477.0 30/7 30.2 20.1
MSJ-5565-1 Parakeet 556.5 24/7 31.2 21.4
MSJ-5565-2 Dove 556.5 26/7 33.8 22.7
MSJ-5565-3 Eagle 556.5 30/7 33.8 22.7
Material: Seamless Aluminum Alloy Tube
82
MSJ Table of ACSS Splice Sleeve
Catalog Number ACSS Conductor Dimension (IN.) (L Before
Compression)
Code Word KCMIL Strand AL/STL Full Tension Loop Splice
MSJ-605-1 Peacock 605.0 24/7 33.8 22.7
MSJ-605-2 Squab 605.0 26/7 33.8 22.7
MSJ-605-3 Wood Duck 605.0 30/7 33.8 22.7
MSJ-605-4 Teal 605.0 30/19 33.8 22.7
MSJ-636-1 Rook 636.0 24/7 33.8 22.7
MSJ-636-2 Grosbeak 636.0 26/7 33.8 22.7
MSJ-636-3 Scoter 636.0 30/7 33.8 22.7
MSJ-636-4 Egret 636.0 30/19 33.8 22.7
MSJ-666-1 Flamingo 666.0 24/7 33.8 22.7
MSJ-666-2 Gannet 666.0 26/7 33.8 22.7
MSJ-7155-1 Stilt 715.5 24/7 36.5 25.4
MSJ-7155-2 Starling 715.5 26/7 36.5 25.4
MSJ-7155-3 Redwing 715.5 30/19 36.5 25.4
MSJ-795-1 Tern 795.0 45/7 38.3 25.4
MSJ-795-2 Cuckoo 795.0 24/7 36.5 25.4
MSJ-795-3 Condor 795.0 54/7 36.5 25.4
MSJ-795-4 Drake 795.0 26/7 38.3 26.6
MSJ-795-5 Mallard 795.0 30/19 38.3 26.6
MSJ-900-1 Ruddy 900.0 45/7 38.3 26.6
MSJ-900-2 Canary 900.0 54/7 38.3 26.6
MSJ-954-1 Rail 954.0 45/7 38.3 26.6
MSJ-954-2 Towhee 954.0 48/7 38.3 26.6
MSJ-954-3 Cardinal 954.0 54/7 38.3 26.6
MSJ-954-4 Canvasback 954.0 30/19 40.2 28.6
MSJ-10335-1 Ortolan 1033.5 45/7 40.2 28.6
MSJ-10335-2 Curlew 1033.5 54/7 40.2 28.6
83
MSJ Table of ACSS Splice Sleeve
Catalog Number ACSS Conductor Dimension (IN.) (L Before
Compression)
Code Word KCMIL Strand AL/STL Full Tension Loop Splice
MSJ-1113-1 Bluejay 1113.0 45/7 40.2 28.6
MSJ-1113-2 Finch 1113.0 54/19 41.9 30.2
MSJ-11925-1 Bunting 1192.5 45/7 41.9 30.2
MSJ-11925-2 Grackle 1192.5 54/19 43.5 31.9
MSJ-1272-1 Bittern 1272.0 45/7 43.5 31.9
MSJ-1272-2 Pheasant 1272.0 54/19 43.5 31.9
MSJ-13515-1 Dipper 1351.5 45/7 43.5 31.9
MSJ-13515-2 Martin 1351.5 54/19 45.2 33.6
MSJ-1431-1 Bobolink 1431.0 45/7 45.2 33.6
MSJ-1431-2 Plover 1431.0 54/19 45.2 33.6
MSJ-15105-1 Nuthatch 1510.5 45/7 45.2 33.6
MSJ-15105-2 Parrot 1510.5 54/19 47.0 35.4
MSJ-1590-1 Lapwing 1590.0 45/7 47.0 35.4
MSJ-1590-2 Falcon 1590.0 54/19 47.0 35.4
MSJ-1780-1 Chukar 1780.0 84/19 48.8 37.1
MSJ-2057-1 Roadrunner 2057.0 76/19 48.8 37.1
MSJ-2156-1 Bluebird 2156.0 84/19 50.7 39.1
MSJ-2312-1 Thrasher 2312.0 76/19 52.0 40.4
84
CL Armor Grip Suspension Clamp (Conductor)
A C
E
B
H
I
Material: Clamp Body & Clevis: Aluminum Alloy A356-t6
Rubber: EPDM
Bolt & Nut: Galvanized Carbon Steel
Type Conductor Range(IN)
Main Dimension Vertical Breaking Strength (Single/Double)
A B C E H I
CL-95 0.531~0.555 1.732 3.465 0.709 0.787 2.047 5/8
20,000LBS(89kN)/ 40,000LBS(178kN)
CLS-95
CL-120-1 0.556~0.594 1.732 3.465 0.709 0.787 2.047 5/8
CLS-120-1
CL-120-2 0.620~0.645 1.732 3.465 0.709 0.787 2.047 5/8
CLS-120-2
CL-150-1 0.645~0.673 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/
30,000LBS(132kN) CLS-150-1
CL-150-2 0.674~0.690 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/
30,000LBS(132kN CLS-150-2
85
CL Table of Armor Grip Suspension Clamp (Conductor)
CL-185-1 0.732~0.748 1.732 3.74 0.945 0.787 2.205 5/8 15,000LBS(66kN)/
30,000LBS(132kN CLS-185-1
CL-185-2 0.769~0.791 1.732 3.74 0.945 0.787 2.205 5/8 20,000LBS(89kN)/
40,000LBS(178kN) CLS-185-2
CL-210 0.792~0.824 1.969 4.724 0.945 1.063 2.756 5/8
20,000LBS(89kN)/ 40,000LBS(178kN)
CLS-1210
CL-240-1 0.846~0.870 1.969 4.724 0.945 1.063 2.756 5/8
CLS-240-1
CL-240-2 0.870~0.893 1.969 4.724 0.945 1.063 2.756 5/8
CLS-240-2
CL-300-1 0.894~0.907 1.969 4.724 0.866 1.083 2.953 5/8
CLS-300-1
CL-300-2 0.921~0.937 1.969 4.724 0.866 1.083 2.953 5/8
CLS-300-2
CL-300-3 0.937~0.963 1.969 4.724 0.866 1.083 2.953 5/8
CLS-300-3
CL-300-4 0.987~1.006 1.969 4.724 0.866 1.083 2.953 5/8
CLS-300-4
CL-400-1 1.041~1.074 1.969 5.512 1.181 0.984 2.953 5/8
25,000LBS(111kN)/ 50,000LBS (222kN)
CLS-400-1
CL-400-2 1.075~1.152 1.969 5.512 1.181 0.984 2.953 5/8
CLS-400-2
CL-500 1.176~1.226 1.969 5.512 1.181 1.063 2.953 5/8
CLS-500
CL-630 1.315~1.394 1.969 5.512 1.181 1.063 2.953 5/8
CLS-630
(1) Type letters with “S” are double suspension clamp while without letter “S” are single suspension clamp.
86
CL/G Armor Grip Suspension Clamp (GSW)
B
E
I
H
C
Type Conductor Range(IN)
Main Dimension Vertical Breaking Strength (Single/Double)
A B C E H I
CL-1/G 0.272~0.283 1.732 2.362 0.709 1.299 2.165 5/8
15,000LBS(68kN)/ 30,000LBS(136kN)
CLS-1/G
CL-4/G 0.304~0.315 1.732 2.362 0.709 1.299 2.165 5/8
CLS-4/G
CL-6/G 0.328~0.342 1.732 2.362 0.709 1.299 2.165 5/8
CLS-6/G
CL-7/G 0.342~0.356 1.732 2.362 0.709 1.299 2.165 5/8
CLS-7/G
CL-9/G 0.375~0.389 1.732 2.362 0.709 1.299 2.165 5/8
CLS-9/G
CL-10/G
0.390~0.404 1.732 2.362 0.709 1.299 2.165 5/8
CLS-10/G
Material: Clamp Body & Clevis: Galvanized Steel Armor Rod: Galvanized steel wire or Aluminum clad steel wire Rubber: EPDM Bolt & Nut: Galvanized Carbon Steel
87
CL/G Table of Armor Grip Suspension Clamp (GSW)
Type Conductor Range (IN)
Main Dimension
Vertical Breaking Strength (Single/Double)
A B C E H I
CL-1/G 0.272~0.283 1.732 2.362 0.709 1.299 2.165 5/8
15,000LBS (68kN)/
30,000LBS (136kN)
CLS-1/G
CL-4/G 0.304~0.315 1.732 2.362 0.709 1.299 2.165 5/8
CLS-4/G
CL-6/G 0.328~0.342 1.732 2.362 0.709 1.299 2.165 5/8
CLS-6/G
CL-7/G 0.342~0.356 1.732 2.362 0.709 1.299 2.165 5/8
CLS-7/G
CL-9/G 0.375~0.389 1.732 2.362 0.709 1.299 2.165 5/8
CLS-9/G
CL-10/G 0.390~0.404 1.732 2.362 0.709 1.299 2.165 5/8
CLS-10/G
CL-11/G 0.405~0.418 1.732 2.362 0.709 1.299 2.165 5/8
CLS-11/G
CL-12/G 0.419~0.434 1.732 2.362 0.709 1.299 2.165 5/8
CLS-12/G
CL-13/G 0.435~0.450 1.732 2.362 0.709 1.299 2.165 5/8
CLS-13/G
CL-15/G 0.470~0.481 1.732 2.362 0.709 1.299 2.165 5/8
CLS-15/G
CL-16/G 0.481~0.500 1.732 2.362 0.709 1.299 2.165 5/8
CLS-16/G
(1) Type letters with “S” are double suspension clamp while without letter “S” are single suspension clamp.
88
D
L
P
D1
FJH Preformed Armor Rod (Conductor)
Catalog number
ACSR Conductor Dimension (IN.) Nos per set
Code Word KCMIL Strand AL/STL L D D1 P FYH-2668-1 Partidge 266.8 26/7 59.1 0.142 0.533 5.9 16
FYH-2668-2 Junco 266.8 30/7 59.1 0.142 0.548 6.1 16
FYH-300-1 Ostrich 300.0 26/7 59.1 0.142 0.564 6.3 16
FYH-3364-1 Linnet 336.4 26/7 70.9 0.181 0.598 6.7 14
FYH-3364-2 Oriole 336.4 30/7 70.9 0.181 0.615 7.3 14
FYH-3975-1 Brant 397.5 24/7 70.9 0.181 0.641 7.3 14
FYH-3975-2 Ibis 397.5 26/7 70.9 0.181 0.650 7.5 14
FYH-3975-3 Lark 397.5 30/7 70.9 0.181 0.669 7.7 14
FYH-477-1 Flicker 477.0 24/7 74.8 0.181 0.702 7.9 16
FYH-477-2 Hawk 477.0 26/7 74.8 0.181 0.712 8.3 16
FYH-477-3 Hen 477.0 30/7 74.8 0.181 0.733 8.5 16
FYH-5565-1 Parakeet 556.5 24/7 78.7 0.248 0.759 8.9 13
FYH-5565-2 Dove 556.5 26/7 78.7 0.248 0.769 9.1 13
FYH-5565-3 Eagle 556.5 30/7 78.7 0.248 0.790 9.6 13
89
FYH Table of Preformed Armor Rod
Catalog number
ACSR Conductor Dimension (IN.) Nos per set
Code Word KCMIL Strand AL/STL L D D1 P
FYH-605-1 Peacock 605.0 24/7 78.7 0.248 0.790 9.6 13
FYH-605-2 Squab 605.0 26/7 78.7 0.248 0.790 9.6 13
FYH-605-3 Wood Duck 605.0 30/7 78.7 0.248 0.825 9.8 13
FYH-605-4 Teal 605.0 30/19 78.7 0.248 0.825 9.8 13
FYH-636-1 Rook 636.0 24/7 78.7 0.248 0.811 9.4 13
FYH-636-2 Grosbeak 636.0 26/7 78.7 0.248 0.821 9.8 13
FYH-636-3 Scoter 636.0 30/7 78.7 0.248 0.846 9.8 13
FYH-636-4 Egret 636.0 30/19 78.7 0.248 0.846 9.8 13
FYH-666-1 Flamingo 666.0 24/7 78.7 0.248 0.830 9.8 13
FYH-666-2 Gannet 666.0 26/7 78.7 0.248 0.842 9.8 13
FYH-7155-1 Stilt 715.5 24/7 86.6 0.248 0.860 9.8 14
FYH-7155-2 Starling 715.5 26/7 86.6 0.248 0.872 9.8 14
FYH-7155-3 Redwing 715.5 30/19 86.6 0.248 0.897 10.2 14
FYH-795-1 Tern 795.0 45/7 86.6 0.248 0.882 9.8 14
FYH-795-2 Cuckoo 795.0 24/7 86.6 0.248 0.906 10.2 14
FYH-795-3 Condor 795.0 54/7 86.6 0.248 0.906 10.2 14
FYH-795-4 Drake 795.0 26/7 86.6 0.248 0.920 10.2 14
FYH-795-5 Mallard 795.0 30/19 86.6 0.248 0.946 10.4 14
FYH-900-1 Ruddy 900.0 45/7 86.6 0.248 0.939 10.6 14
FYH-900-2 Canary 900.0 54/7 86.6 0.248 0.964 10.8 16
FYH-954-1 Rail 954.0 45/7 86.6 0.248 0.967 10.8 16
FYH-954-2 Towhee 954.0 48/7 86.6 0.248 0.975 10.8 16
FYH-954-3 Cardinal 954.0 54/7 98.4 0.248 0.993 11.0 16
FYH-954-4 Canvasback 954.0 30/19 98.4 0.248 1.036 11.2 16
FYH-10335-1 Ortolan 1033.5 45/7 98.4 0.248 1.006 11.0 16
FYH-10335-2 Curlew 1033.5 54/7 98.4 0.248 1.033 11.2 16
90
FYH Table of Preformed Armor Rod
Catalog number
ACSR Conductor Dimension (IN.) Nos per set
Code Word KCMIL Strand AL/STL L D D1 P FYH-1113-1 Bluejay 1113.0 45/7 98.4 0.307 1.044 11.2 15
FYH-1113-2 Finch 1113.0 54/19 98.4 0.307 1.073 11.4 15
FYH-11925-1 Bunting 1192.5 45/7 98.4 0.307 1.081 11.4 15
FYH-11925-2 Grackle 1192.5 54/19 98.4 0.307 1.111 11.4 15
FYH-1272-1 Bittern 1272.0 45/7 98.4 0.307 1.116 11.8 15
FYH-1272-2 Pheasant 1272.0 54/19 98.4 0.307 1.147 12.8 15
FYH-13515-1 Dipper 1351.5 45/7 98.4 0.307 1.150 12.8 15
FYH-13515-2 Martin 1351.5 54/19 98.4 0.307 1.182 13.0 15
FYH-1431-1 Bobolink 1431.0 45/7 98.4 0.307 1.184 13.0 15
FYH-1431-2 Plover 1431.0 54/19 98.4 0.307 1.216 13.0 16
FYH-15105-1 Nuthatch 1510.5 45/7 98.4 0.307 1.217 13.0 16
FYH-15105-2 Parrot 1510.5 54/19 98.4 0.307 1.250 13.0 17
FYH-1590-1 Lapwing 1590.0 45/7 98.4 0.307 1.248 13.0 17
FYH-1590-2 Falcon 1590.0 54/19 98.4 0.307 1.281 14.2 17
FYH-1780-1 Chukar 1780.0 84/19 137.8 0.307 1.330 14.6 17
FYH-2057-1 Roadrunner 2057.0 76/19 137.8 0.362 1.411 14.6 17
FYH-2156-1 Bluebird 2156.0 84/19 137.8 0.362 1.462 14.6 17
FYH-2312-1 Thrasher 2312.0 76/19 137.8 0.362 1.496 14.6 17
91
Contact us…
JS Hardware 51 Shuang-xian-nan Road Jiangdu City, Jingsu Province, China Tel: 86-514-86821637 Fax: 86-514-86821467 Email: sales@js-hardware.com In USA and Canada 4030 Moorpark Ave., Suite 222 San Jose, CA 95117 Tel: 408-850-1416 Fax: 408-519-7091 Email: sales@js-hardware.com Website: www.js-hardware.com