Post on 06-Apr-2018
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 1/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design Drawings
developed bydeveloped by
John K. GershensonJohn K. Gershenson, Ph.D., Ph.D.ro essor o ec an ca ng neer ngro essor o ec an ca ng neer ng
MICHIGAN TECHNOLOGICAL UNIVERSITYMICHIGAN TECHNOLOGICAL UNIVERSITYandand
thebenshimagroupw ww .nasa.govw ww .nasa.gov
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 2/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 22
Phase C: Optimized Parameter Design
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 3/35
– A full set of drawings with assembly.
appendix of the report.
– Ensures that production plans, fabrication,
,products are in place and ready to begin
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 33
.
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 4/35
Bill of materials
Assembly drawings
Part drawin s
Material specification
Finish specification
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 44
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 5/35
each component, sub assemblyGreat for costin
With or without overall assembly drawing
Don’t re eat throu h drawin s Some parts on assembly drawing some in the
details but tell me how to get there (where to
eg n
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 55
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 6/35
Bill of Materials (Quantity required)
Tolerances
Clear communication of how this part will be used
(clearances, fits, surface roughness, heat treatment,coa ngs
Best way to communicate DFA, DFM information
Can you make it?
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 66
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 7/35
“ ’ ”
Engineering drawings
or s ops or ra n ng roug emp oyer
GD&T Procedures – ANSI/ASME Y14.5M-1994
– ISO 9015 and 26921
upplier catalogs (Parker eals, etc.)
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 77
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 8/35
(Josh Loukus)
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 88
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 9/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 99
(Josh Loukus)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 10/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1010
(Josh Loukus)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 11/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1111
(Josh Loukus)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 12/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1212
(Josh Loukus)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 13/35
Drawin sDrawin s –– Lunar PenetratorLunar Penetrator
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1313
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 14/35
were created using modeling and
Care was taken to include title blocks,o mater a s, etc .
Adequate views were included for clear
understanding
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1414
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 15/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1515
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 16/35
Assembly DrawingAssembly Drawing –– LunarLunar
enetratorenetrator
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1616
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 17/35
Assembly DrawingAssembly Drawing –– StorageStorage
ssem yssem y
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1717
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 18/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1818
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 19/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 1919
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 20/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2020
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 21/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2121
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 22/35
––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2222
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 23/35
-- ––
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2323
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 24/35
--
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2424
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 25/35
– Determines the readiness of the system
required number of systems
– fabrication, assembly, and integration-enablin roducts and ersonnel are in
place and ready to begin production
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2525
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 26/35
– Normally held in the final stages of the final
C)
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2626
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 27/35
– Final production build-to baseline,,
approved
– authorized for production
– qualification testing and integration
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2727
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 28/35
– Significant production engineering problemsencountered durin develo ment are resolved
– Design documentation is adequate to support
production – The production plans and preparation are
adequate to begin fabrication
– -resources are available, have been allocated, andare ready to support end product production
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2828
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 29/35
– The design is appropriately certified
– The system requirements are fully met inthe final production configuration
– equa e measures are n p ace o supporproduction
– - -ensure ease and efficiency of production
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 2929
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 30/35
– Risks have been identified, credibly,
mitigation efforts have been defined
– and critical parts identified
–
– Alternative sources for resources have
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 3030
,
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 31/35
– Adequate spares have been planned and
– Required facilities and tools are sufficient
– Specified special tools and test equipment
– Production and support staff are qualified
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 3131
– (NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 32/35
– Production engineering and planning aresufficientl mature for cost-effective roduction
– Production methods and processes are consistent
with quality requirements and compliant withoccupa ona sa e y, env ronmen a , an energyconservation regulations
– Qualified su liers are available for materials that
are to be procured
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 3232
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 33/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design DrawingsNASANASA ESMDESMD Capstone DesignCapstone Design
John Gershenson, Ph.D.John Gershenson, Ph.D. 3333
(NASA Systems Engineering Handbook, SP 2007)
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 34/35
National Aeronautics and Space AdministrationNational Aeronautics and Space Administration
16. Detailed Design Drawings16. Detailed Design Drawings
developed bydeveloped by
John K. GershensonJohn K. Gershenson, Ph.D., Ph.D.ro essor o ec an ca ng neer ngro essor o ec an ca ng neer ng
MICHIGAN TECHNOLOGICAL UNIVERSITYMICHIGAN TECHNOLOGICAL UNIVERSITYandand
thebenshimagroup
w ww .nasa.govw ww .nasa.gov
8/3/2019 16 Detailed Design Drawings NASA
http://slidepdf.com/reader/full/16-detailed-design-drawings-nasa 35/35