Post on 17-Mar-2020
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 1
1. What is Quality?
Authur R Turner AND Irvings Detero define quality as: A basic business strategy that provides goods/services which completely satisfy both internal and external customers by meeting their explicit and implicit expectations. This strategy utilizes the all talents of all employees to the benefit of the organization in particular, society in general, and provides a positive financial return the stakeholders. GItlow/Gitlow/ Oppenheim /Oppenheim define quality as:
A judgement by customers or users of a product or service; it is the extent to
which the customers or users believe the product or service surpasses their
needs and expectations.
According to GItlow/Gitlow/ Oppenheim and Oppenheim Quality also
encompasses the never ending improvement of a firm’s extended process.
This term refers to the expansion of the organisation to include suppliers,
customers, investors, employees, and the community
The two definitions explicitly place customer satisfaction as the ultimate goal
of an organisation.
2. Types of Quality
Three types of quality to be considered are: Design, Conformance and
Performance.
Design: It is essential to determine the a product or service concept that
satisfies the customer – the form, size and colour of a product, does it fit to
current taste and design standards? Is it a modern design or more old
fashioned? The material used to build the product will also have an important
impact on the design. How flexible is the material, is the material liked by the
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 2
customers? Aspects of design also have to do with cultural issues. Certain
countries prefer certain colours – so there is no one good design in general,
but a good design for a specific target group.
Performance – does the product deliver what is promises continuously? Does
it have all the functions needed for this product. How often does the product
need a repair? How long does it last? Performance can be determined
through customer reaearch and service and sales call analysis
Conformance – are all the products the same? When you produce sweets – do
all sweets have the same ingredients in amount and quality. When you produce
a steel tool, do all tools have the same amount of steel used in production?
The need for Customer research
Consumer research is a collection of procedures implemented to clarify
customer needs. The study should be on going so that the organisation will
always be in touch with changing customer needs
3. Sources of Loss in Quality
A loss in quality may occur when a process generates products or services
whose specifications deviates from the needs of individuals in a market
segment. This can be redressed by increasing the number of market segments
and tailoring the product to consumer’s requirements.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 3
A loss in quality also occurs when a process generates goods or services
whose quality characteristics are not uniform. Such variation causes a product
to function inconsistently for a given market segment.
The two sources of loss in quality should be determined in the quality of
performance assessment. This information should then be fed into the quality
of design stage and the quality of conformance stage.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 4
4. Why Quality?
Quality is of major importance for any company, especially in export business.�
High quality of exports realises higher unit value��Quality has also become a
major issue in any business development project and in cooperation with large
companies. �
• BENEFITS OF IMPROVING QUALITY
Productivity rises
• Cost per good unit decreases
• Price can be cut
• Workers morale may improve because they are not seen as the problem
5. Who Defines Quality?
There are different national and international organisations defining quality
standards. One of the most known international standards it the ISO 9001 /
2000 standard. But there are other certifications CMM Levels (software
development) for specific industries. But, besides all standards in product
quality or processes, in the end, it is the customer that will define what quality
is by his needs and wishes.
Regional and International Institutions for Standards are:
SABS South Africa Bureau of Standards
TBS Tanzania Bureau of Standards
ZBS Zambia Bureau of Standards
MBS Malawi Bureau of Standards
INNOQ Mozambique Standards Bureau
ISO International Standards Organisation
6. Quality Assurance via ISO 9001
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 5
ISO 9001 / 2000 is an international quality assurance and certification system.
The ISO – the International Standardization Organization was founded in 1947
by the United Nations. Since then it has been working to develop and foster
standardization systems for all over the world.
ISO formulates all procedures and work processes for each company,
business and production process possible. How to do every step of the way in
the production and business cycle?
For example, a company producing steel frames receives a shipload of steel.
Now the handbook gives a whole set of procedures and steps that need to be
taken in order to test the material etc, before it goes into production. All of
these steps have to be followed with each shipload and all of these activities
have to be documented.
Every two years, ISO controllers will come to the company and check, whether
the company follows the work processes and procedures set up for this kind of
business and / or production and whether the documentation is correct.
ISO 9001 / 2000 also requires that all employees are aware of the processes,
know the handbook and have the current edition of the relevant handbook
available at their work place.
The main goal of ISO 9001 / 2000 is the improvement of product quality. In
comparison to other systems like TQM, ISO 9001 / 2000 it does not include the
management aspect or the inclusion of partners – e.g. suppliers.
Generally, the effect of ISO 9001 / 2000 certification is, that the production
processes are taking place on a more objective level, with more awareness to
what one is doing. The work processes are clearly defined. There is still the
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 6
danger, that unnecessary services/work are included, but if so, they are
definitely provided in a better quality.
The newest version of ISO 9001 / 2000 asks in addition to the former for a
continuous improvement of processes. So for the future certification ISO will
ask not only for a comparison of procedures and doing, but also for a
continuous checking and improving of these procedures and doing.
7. HOW TO IMPROVE QUALITY
Constancy of purpose:
A firm’s mission statement, operating philosophy and goals should provide a
framework for consistent action on day-to-day and long term basis. Everyone I
the extended process should be encouraged to cooperate and continually
improve quality and meet customer needs.
Quality Consciousness:
This refers to the rejection of commonly accepted levels of defects, rework and
poor service with the realization that defects are not for free- somebody makes
them and is paid for doing so, further more the organization. Defects detection
is the lowest form of quality consciousness since it entails the expectation of
making defects and the assumption that the defects will be found during
inspection and action taken afterwards.
Play the role of inspector and count the number of fs in the following passage.
FINISHED FILLES ARE THE RESULT OF YEARS OF SCIENTIFIC STUDY
COMBINED WITH THE EXPERIENCE OF MANY YEARS.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 7
Did you find the six fs? This demonstrates the fallibility of 100% inspection. It
is therefore more convenient for an organization to adopt Defect prevention
which emphasizes improving the process so that defects are not made.
Quality in supplied goods
Many organizations purchase solely on the basis of price, without adequately
measuring quality. It is important to realize that for the end product to be of
quality all inputs should also be of quality.
8. Checklists
In order to improve the quality in your company’s work there are several
checklists, which will help you to start improving your companies quality. All of
the checklists will go by questions/questionnaires, which need to be answered
from the background of the work in your company.
3 MU checklist
6 W checklist
6 M checklist
3-Mu Checklist
The employees’ ability to solve problems will be improved via training. Content
wise the trainings should concentrate on the implementation of PDCA (Plan-
Do-Check-Act) cycle. For this, the following checklists are very helpful.
1. Waste (Muda)
2. Overloading (Muri)
3. Deviation (Mura)
concerning:
• Employees
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 8
• Technology
• Methods
• Time
• Possibility
• Tools and equipment
• Material
• Product volume
• Turn around
• Place
• Way to think
6-W-Checklist
What?
What needs to be done?
What is done right now?
What should be done?
What else can also be done?
What else also needs to be done?
What 3-Mu“ are done?
Why?
Why is it done?
Why should it be done?
Why is it done here?
Why is it not done differently?
Why is it done this way?
Are there the „3-Mu“ in the way to think?
How? (Unfortunately the translation from German does not work here)
How is it done?
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 9
How should it be done?
Could this method be used in different areas?
Is there anything else that could be done this way?
Are there the „3-Mu“ in this method?
Where?
Where should it be done?
Where is it done?
Where could it also be done?
Where should it also be done?
Where are the „3-Mu“ done?
Who?
Who is doing what?
Who is doing it right now?
Who should be doing it?
Who else could do it?
Who else should do it?
Who is doing the „3-Mu“?
When?
When is it done?
When is it really done?
When should it be done?
When could it also be done?
When should it also be done?
When are the three „3-Mu“ are done?
6-M Checklist
Mensch (Human)
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 10
Is he following the standards?
Is his work efficiency acceptable?
Does he think problem oriented?
Is he dependable?
Is he sufficiently qualified?
Does he have enough experience?
Is the work place appropriate for him?
Is he willing to improve?
Is he supportive to good relations with colleagues?
Is he healthy?
Machine
Does the machine fit to the needs of production?
Does the machine fit to the needs of the processes?
Is the machine regularly maintained?
Is the inspection and control done enough?
Are there problems (mechanical, electronic) which lead to a stand still of the
machinery often?
Does the machine work sufficiently accurate?
Does the machine produce unmoral sounds or materials?
Is the layout for the machine correct?
Are there enough machines?
Do they all stand in the right line for the way of production?
Material
Are there deviations with regard to volume?
Are there deviations with regard to quality?
Is it the right brand?
Does the material contain leftovers or dirt?
Is the amount of the turn around correct?
Is any material wasted?
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 11
Is the material transport right and efficient?
Is the turn around of material sufficiently checked?
Is the quality standard of the material sufficient?
(Working) Method
Are there appropriate work standards
Has this work standard been raised?
Is the method clear?
Does the method guarantee a good product?
Is the method efficient?
Does the follow up of work steps make sense?
Are the methods of work tuned to each other in a sensible form?
Are the methods known and used?
Is there enough contact between the different processes?
Measure
Are there fitting measurement procedures?
Do the measurement procedures fit to the needs of the processes?
Are measurements done regularly?
Is the measuring equipment in excellent condition?
Are there regular checks on the measurement equipment?
Is the amount of measurement equipment sufficient?
Is the measuring exact enough?
Is the measuring done efficiently?
Is there enough time to doe the measuring?
Is there a documentation of measuring data?
“Milieu”(surrounding)
Is the surrounding appropriate?
Is the lightning sufficient?
Is the air conditioning (ventilation) sufficient?
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 12
Are there disturbing vibrations?
Do temperature and humidity fit?
Is the air to breeze clean?
Are there enough rooms for breaks?
Does the working climate fit?
Are there any possibilities to exchange ideas and problems with colleagues
and superiors?
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 13
9. Quality Systems
There are different quality systems that are accepted internationally. Quality
systems are used to ensure that products or services being produced meet
customer expectations and international standards. Below is a historic
development of the quality systems:-
i. Innovator Quality System: The question of quality used to be solved
by innovations. It was innovations and new inventions that brought
an additional amount of quality to the production process and to the
products. This system was used for a long time until production
started in factories.
ii. Foreman Quality System: Quality was achieved by the control of the
foreman. The workers did not control their quality anymore as they
had done during the times of the innovator quality system but a
foreman in the factory controlled their work and ensured a certain
quality standard.
iii. Statistical Quality System: The statistical quality system evolved
with machinery and mass production. The quality of products was
now defined statistically.
iv. Quality Management: This refers ability of the management of a
company to ad hear to all aspects of quality. The quality of the
management was included into the definition of quality. Was a
company well managed and was it flexible?
v. Total Quality Management (TQM) is today a standard in quality
thinking. It does not only include the statistical elements of quality or
the management aspect but it also takes into account the needs of
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 14
the customer, all aspects of marketing and the production process
into the quality scheme.
10. Definition of Total Quality Management
Total Quality Management (TQM) is the most far-reaching approach towards
quality for a company anywhere in the world. It is much more than a pure
control of product quality, it includes every aspect of the company’s work.
Every letter of the short cut TQM underlines important aspects and contents of
the approach:
“T” as in Total
Means the integration of „everybody“ not only the employees but also the
customers and suppliers into the concept of quality. No more thinking in
isolated functional areas (such as quality in the production process) but an all
parts of the company including approach.
It means:
Integration and participation of customers
Integration and participation of employees
Integration and participation of suppliers
“Q” stands for Quality
It includes the quality of work, the quality of processes within the company and
the quality of the company itself, because out of these, the quality of the
products develops naturally. So,
Quality of work,
Quality of work processes,
Quality of the company,
= results into quality of the products / services of the company
“M“ stands for Management
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 15
This underlines the importance of leadership and management in the world of
quality. Quality has to be managed and also the management has to be of high
quality.
From the company perspective TQM can become a most central strategy to
lead the company, including:
Implementing and continuing quality leadership in all departments of the
company
High quality management (setting a positive example)
Support teamwork and additional competencies of employees
Showing persistence in implementation and control
The 12 Guiding Elements Towards TQM
1. Understanding and implementing the new perspective
2. Active support of the general management for TQM
3. Personnel development for leadership positions
4. Changes in Management Behaviour
5. Orientation towards employees
6. Orientation towards customers
7. Integration of suppliers
8. Strategic / general positioning of the company on the basis of general
values and goals of the company
9. Setting of goals and following them
10. Preventive measures to ensure quality
11. Continuous improvement on all levels
12. Quality controlling
10.1 Understanding and Implementing the New Perspective
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 16
What does that mean?
Better quality costs less and not more. Most of the time people believe, that
better quality cannot be achieved together with higher productivity. This is
wrong! But how does productivity increase and at the same time improving
quality?
The answer: Because of a better quality in processes, additional work,
unnecessary spending and mistakes are reduced. Quality is the key to
productivity.
Higher process quality means:
Machines are used more often, longer or more effectively
Shorter time spans for material to run through the production process
Fewer material storage
Better product quality
Fewer unshakeable products and additional work
Higher Product quality results in:
Improved functionality and reliability
Reduced cost in the warranty period
Lesser cost to remove mistakes / faults and
Increasing satisfaction of customers.
10.2 Active Support of the General Management for TQM
What does that mean?
The implementation of TQM is a strategic – a general decision for a company. It
can result into changes for all structures and departments of a company. Such
decisions can pop up opposition from various sides – employees and / or
management. The implementation of TQM has to be lead and fully supported
by the general management. It cannot be just delegated to a “quality manager”.
Only the general management has the necessary authority to implement
changes as such.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 17
What does it actually mean, when the general management participates in the
process?
The general management takes over the function of a paragon, a positive
example. This is important for all employees as it gives the security and
assurance that their own work and input is correct.
The support and interaction of the general management ensures that there
will be an important „power“ within the company promoting this.
They show: quality is a topic for the general management and therefore for
everybody in the company.
10.3 Personnel Development for Leadership Positions
What does it mean?
TQM is a method to lead a company, which is based on support of all
personnel working in the organisation. So, leadership has to be designed, in
order to give all employees the possibility to participate.
Quality will be produced by the people working in the company; only when the
environment works will there be a possibility for them to provide full energy for
servicing the customers. It is the task of the management to provide this
surrounding for the employees.
A new positioning within the company develops out of this: the employee
becomes the customer of the general management.
And what is it these customers want? They need a surrounding that suffices
their needs; that supports their creativity and their engagement within their
work. They will ask for new forms of cooperation. They have to be part of the
process and taken into account.
These changes ask for an open relationship between all participants.
Openness is based on trust and trust can only develop, when the leadership
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 18
offers trust to the employees openly. The leader (no matter at what level) has to
be advisor, supporter and partner for his employees on the basis of a general
guideline, which speaks of respect for the personality of those involved.
Teamwork is necessary to use all the potential of the employees, also the
leadership has to be prepared for this new form of cooperation. Social
competence becomes even more important as much as the ability to
communicate and to moderate.
10.4 Changes in Management Behaviour
Change in Management
From To
Boss, Provider of orders
Trainer of a team, communicating
goals, explaining why decisions are
taken or actions are needed
Controller Supporter, positive example
Single leader Team member
Internally competing Internally cooperating and externally
competing
Closed, unapproachable Open, approachable
Owner mentality – this is my company,
you are working for me, I pay your
salary and you do what I say
Caretaker mentality – the company
has been given to me to take care of
it, I am responsible to create an
environment, where the personnel can
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 19
develop its potential most effectively
10. 5 Orientation Towards Employees
What does it mean?
Important for the orientation towards employees is how do you view your
employees? Every employee offers a potential of creativity and problem
solving capacity to the company. A company becomes to life through its
employees. Without employees the company does not function, even though
machinery is used more or less heavily. It is the employees who are most
important.
Orientation towards employees needs a work surrounding where the employee
has a chance become actively involved in the company, to be part of the
company. They should have the possibility to act independently, to gain
personnel satisfaction and to use their creativity for the good of the company.
10.6 Orientation Towards Customers
What does it mean?
The customer – not the company – defines what is actually meant by quality.
The bottom line for your quality standard is the satisfaction of your customers.
Satisfied customers are the basis of existence for your company and the only
instrument to ensure long-term survival and success of the company.
What is the result?
The goals of customer orientation are satisfied and even better enthusiastic
customers, who take along their friends. The customers need to be bound to
the company via their satisfaction and enthusiasm.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 20
This offers several advantages:
The rate of reselling to a customer becomes higher, the more comfortable
and satisfied a customer is.
The costs for marketing and selling, which are necessary to keep up the
relation to this customer will decrease with time.
Old customers react less sensitive towards price increases than new
customers.
Satisfied customers will advise others on your company and support you by
word of mouth.
Looking at number, it works like this:
It is 600 % more expensive to gain new customers than to keep old ones.
There is a 300 % larger possibility with satisfied customers that they will order
again than with unsatisfied customers.
Nearly as big is the possibility that very satisfied customers will become the
100% best advertisers for the company – word of mouth.
95 % of the angry customers will stay with the company when the problem is
solved within five days.
75 % of those customers changing to competitors will do so because of
inadequate quality of service.
25 % of those customers changing to competitors are doing so because of low
product quality or high prices.
Guidelines for Customer Oriented Behaviour
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 21
• The customer always comes first – leave everything else when a
customer is there. The customer should never feel that he is disturbing
internal activities of the company - he does not disturb your work – he is
the reason for you working there at all.
• You are not doing a favour to the customer servicing him – it is the
customer doing you a favour when he allows you to serve him.
• Address the customer by his name – he is not a number, but a human
being with needs and feelings like you.
• Explain what you are doing – but do not act like a superior specialist, the
customer might know more than you.
• Excuse yourself if something went wrong, if the customer had to wait, if
. . . .
• Take up the responsibility if something went wrong – for your customer
you are the supplier. Do not search for other colleagues responsible or
for specific circumstances.
• The customer has to be the winner in a claim discussion – not you!
• Be open, if there is something you do not know – it makes you more
credibility than a judgement without knowledge.
• Do not discuss or argue with colleagues in front of customers – they are
not interested in these.
• The customer pays your salary. So he is not an outsider but the most
important part of your business.
Remember: Nobody has ever won an argument with a customer.
10.7 Integration of Suppliers
What does it mean?
The quality of the product you are delivering is not only depending on your
own work, but also on the quality of your supplier and the form of cooperation
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 22
with the supplier can be of central importance for the competitiveness of your
company.
Forms of cooperation
• Pure component delivery, supplier knows how to produce the parts
needed - he becomes a product specialist.
• Component delivery plus additional services, the supplier becomes a
partner in development, sets up its own development facilities for
module or system supply.
• Component delivery plus problem solving capacities (knowledge,
experience) for product and process innovation.
The third most intensive form of cooperation is only possible, when you have a
limited number of suppliers.
The intensive cooperation has several advantages compared to a more
competitive relationship with the suppliers. From the perspective of direct cost,
they are:
• The costs for searching and testing new suppliers will be reduced.
• The cost for discussions and the set up of quality measures with new
suppliers will be reduced.
• Cost for quality control will be reduced.
• Cost for needed changes and improvements in the ongoing business
relationship will be reduced.
• Possibility for „Just-in-Time delivery.
• The supplier has a chance to deliver a larger number of pieces and
therefore use its machinery more effectively.
10.8 Strategic / General Positioning of the Company on the Basis of
General Values and Goals of the Company
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 23
What does it mean?
To implement Total Quality Management is a strategic decision, which will
affect the whole company. Depending on the size of the company it will take up
to 3 to 7 years – the continuous development is a never-ending process. On the
way to TQM all structures and processes will be put into question, maybe
changed or remain. It is important for the employees to have a guideline in this
process of change, because they will ask where are we heading at?
When the only constant element in your work life is change, the management
has to provide support. This can be given via basic company values and a
clear company aim. These should not change but stay continuously. All
changes have to take place in accordance with these two.
Basic Values
Basic values are enduring and long lasting principles of the companies
working. Basic values define how the business in the company is to be done.
How the general community is seen from the perspective of the company and
what the role of the company is within the society.
10.9 Setting Goals and Following Them
Companies define strategic goals. They look at a time span of 5 to 10 years.
These goals need to be put into more concrete plans (with specifically defined
goals) on a yearly basis. This is done by a comparison of the current situation
and planned for status of the company. When comparing current situation and
planned for status, there will be differences naturally. These differences have
to be reduced through changes and improvements within the company.
The goals of the year concerned will be divided into part goals and those are
given to the various departments / sections of a company and combined with
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 24
the measures to be taken. With the specific measures, it will be possible for
everybody in the company to understand, what is his part in reaching the
overall goals. It is important here that the various parts of the company are
included into the planning process.
10.10 Preventive Measures to Ensure Quality
What does it mean?
Even 100% controls do not increase the quality. Dependency on these controls
is a sign that the production processes are not able to reach the specifications
set and that mistakes are even expected. Controls of the product come to late,
are ineffective and expensive, because if a mistake is found, the material and
the production time has already been spent. Quality cannot be controlled into
the product.
There need to be preventive measures to ensure quality. It has to start with the
product development, with the planning and realization of the production sites
and throughout the whole production process.
The key to preventive quality ensurance lies with the systematic using of
quality techniques. These have been developed to avoid mistakes from the
beginning. To name a few:
Quality Function Deployment,
Mistake potential and importance analysis
Design of Experiments
Statistical Process Control.
Its results?
Experience shows that app. 70 percent of all mistakes take place up to the
process planning and that 80% of the mistakes are taken out during controls
and while using the product.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 25
10.11 Continuous Improvement at all Levels
What are we looking at?
The Japanese have the term of Kaizen, which actually stands for the strive for
continuous improvement. This is not a method to solve one existing problem
but a never-ending process of improvement.
The process is structured into various activities:
Planning (Plan)
Doing
Checking
Acting
This follow-up of activities is called PDCA Cycle. First a plan for the
improvement is made and planned for changes are defined, methods are
chosen and indicators are developed, potential obstacles are discussed. In the
next step the activities will be implemented.
The efficiency of the methods and measures will be controlled with the help of
the indicators (Check), good results will be standardized, developments and
results out of plan have to be analysed. The experiences and results are used
for the next process (Act). The improvement process itself will be improved.
What does it result in?
Results for the employee Result for the company
• Improved self confidence via joint
solving of problems
• Improved work processes
• Stronger identification with the • Improved cooperation between the
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 26
company due to participation
possibilities at work.
departments of the company
• Higher satisfaction due to active
involvement at work
• Reduction of
research/development and
production cost
• Reduced rate of sickness • Higher competitiveness
11.Quality Assurance via ISO 9001
ISO 9001 / 2000 is an international quality assurance and certification
system. The International Standards Organization (ISO) was founded
in 1947 by the United Nations. Since then it has been working to
develop and foster standardization systems all over the world.
ISO formulates all procedures and work processes for each company,
business and production process possible. For example if a company
producing steel frames receives a shipload of steel the handbook
gives a whole set of procedures and steps that need to be taken in
order to check the material if it conforms to laid down standards
before it goes into production. All of these steps have to be followed
with each shipload and all of these quality checks have to be
documented for future use in case of disputes.
Every two years ISO controllers (inspectors) may visit a selected
company to check if the company is following the work processes,
guidelines and procedures set up for this kind of business and / or
production and whether the documentation is correct.
TRADE AFRICA Trade Promotion Program
An Export Guide for SMEs in Southern Africa 27
ISO certification is internationally recognized and can be a powerful
marketing tool in international business. However, implementation
and its accreditation costs including testing costs are not easily
affordable by most companies including SMEs.
Regional and International Institutions for Standards
An exporter should always check with local standards bodies, which
from time to time produce standards that conform to international quality
requirements for a number of products and processes.
Some of the regional and International Institutions for Standards are:
SABS South Africa Bureau of Standards
TBS Tanzania Bureau of Standards
ZBS Zambia Bureau of Standards
MBS Malawi Bureau of Standards
INNOQ Mozambique Standards Bureau
ISO International Standards Organisation