Post on 13-Dec-2015
description
CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
LTE Air Interface Course
2 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Nokia Solutions and Networks Academy
Legal notice
Intellectual Property Rights
All copyrights and intellectual property rights for Nokia Solutions and Networks training documentation, product documentation and slide presentation material, all of which are forthwith known as Nokia Solutions and Networks training material, are the exclusive property of Nokia Solutions and Networks. Nokia Solutions and Networks owns the rights to copying, modification, translation, adaptation or derivatives including any improvements or developments. Nokia Solutions and Networks has the sole right to copy, distribute, amend, modify, develop, license, sublicense, sell, transfer and assign the Nokia Solutions and Networks training material. Individuals can use the Nokia Solutions and Networks training material for their own personal self-development only, those same individuals cannot subsequently pass on that same Intellectual Property to others without the prior written agreement of Nokia Solutions and Networks. The Nokia Solutions and Networks training material cannot be used outside of an agreed Nokia Solutions and Networks training session for development of groups without the prior written agreement of Nokia Solutions and Networks.
4 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
At the end of this module, you will be able to:
• List the main tasks of RRM in LTE
• Describe the functionalities of the eNB related to RRM
• Underline the radio admission control in LTE
• Explain the scheduling functionality
• Distinguish the RRM functionalities related with the control of the radio
link quality (i.e. adaptive modulation and coding, modulation and
transport block size, outer link quality control, power control)
• Describe the handover process in LTE
• Introduce the discontinuous transmission functionality
•
Module Objectives
5 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admission Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
6 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Scope of RRM
Scope of RRM:
• Management and optimized utilization of the (scarce) radio resources:
• Provision for each service/bearer/user an adequate QoS (if applicable)
• Increasing the overall radio network capacity and optimizing quality
• RRM is located in eNodeB
• See next slide
LTE-UE
Evolved Node B
(eNB)
X2
LTE-Uu
eNB
7 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Evolved Node B (eNB)
Inter-cell RRM: HO, load balancing between cells
Radio Bearer Control: setup , modifications and
release of Radio Resources
Connection Mgt. Control: UE State Management,
MME-UE Connection
Radio Admission Control
eNode B Meas. collection and evaluation
Dynamic Resource Allocation (Scheduler)
eNB Functions
IP Header Compression/ de-compression
Access Layer Security: ciphering and integrity
protection on the radio interface
MME Selection at Attach of the UE
User Data Routing to the S-GW/ P-GW
Transmission of Paging Msg coming from MME
Transmission of Broadcast Info (e.g. System info,
MBMS)
• Only network element defined as part of
eUTRAN
• Replaces the old Node B / RNC
combination from 3G.
• Provides all radio management functions
• To enable efficient inter-cell radio
management for cells not attached to the
same eNB, there is a inter-eNB interface
X2 specified. It will allow to coordinate
inter-eNB handovers without direct
involvement of EPC during this process.
8 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
9 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Admission Control ( RAC)
Objective: To admit or to reject the requests for establishment of Radio Bearers (RB) on a cell basis
• Based on number of RRC connections and number of active users per cell
– Non QoS aware
• Operator configures both max. number of established RRC connections and max. number of active users per cell by O&M threshold
– RRC connection is established when the SRBs have been admitted and successfully configured
– UE is considered as active when Radio bearer is established
– Upper bound for maximum number of supported connections depends on the BB configuration of eNB
• RL T: All RRC connection setup request are admitted by default to avoid RAC complexity
• Improvement in RL10: Possibility of giving priority to the HO cases based on the HO cause
At reception of the HO request message the RAC decides in an ‘all-or-nothing’ manner on the
admission / rejection of the resources used by the UE in the source cell (prior to HO). 'All-or-nothing'
manner means that either both SRB AND (logical) DRB are admitted or the UE is rejected. RLT all
SRB are admitted
10 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
11 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
LTE vs. R99 Scheduling
NodeB Rel. 99 eNodeB LTE
Fast pipe is shared among UEs Dedicated pipe for every UE
Channel quality
time/frequency/space
12 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
LTE vs. R99 Scheduling, cont.
Deployment of shared channels offers the possibility for scheduling. In this way
information on varying channel conditions can be exploited to increase the overall
throughput.
Fast scheduling in time (1 ms) and frequency domain reduces latency and improves
peak rate. Adaptive Modulation and Coding leads to higher data rates and optimizes
spectral efficiency Hybrid ARQ leads to higher efficiency in transmission and error
correction. A scheduler deploys mechanisms to determine which user(s) is(are)
served in a given transmission time interval.
Dynamic assignment of radio resources to the UE is done by taking into account
channel conditions and prioritization for the UE with the better channel conditions.
Benefit is the maximization of the Node B throughput, high peak date rates for the
UE and an efficient usage of the radio resources.
Furthermore OFDMA / MIMO allows scheduling decisions on the basis of three
dimensions: time, frequency and space.
13 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
-10
10
30
50
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
S f
r
20 dB
10 cm
1MHz
Fast Fading in Time and Frequency Domain
14 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Fast Fading in Time and Frequency Domain, cont.
As shown in the figure the channel's decorrelation in frequency and time offers the
possibility to exploit the varying conditions.
Scheduling resource is the time-frequency grid. In detail, the basic scheduled
resource consists of a 1 ms (sub-frame, TTI) and 12 subcarriers, 180 kHz. The
efficiency of the scheduling strongly depends on the deployed algorithm.
Additionally the performance depends on the UE speed. Furthermore the gain of the
scheduling may be higher the higher the number of scheduled UE's.
The scheduling functionality is provided by the MAC layer.
15 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Scheduler Types
A variety of scheduling strategies is available. The scheduling strategy is based on a certain metric.
Examples are:
- Round-Robin
No quality indication is taken into consideration. The resources are mainly shared in an equal manner.
- Max C/I.
The UE with the best channel conditions gets the highest priority. The cell throughput is maximized. Starvation of UEs with channels of low quality may be a disadvantage.
- Proportional Fair.
This algorithm defines priorities based on the quality and the averaged scheduled rate.
- QoS
Different strategies exist to get QoS related information integrated.
E.g. Depending on the priority of the service and/or the UE, RT/NRT service type. a scheduling weight can be introduced.
Combinations of the different types can also be applied.
16 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Downlink Scheduler Algorithm
Evaluation of available resources (PRBs/RBGs)
for dynamic allocation on PDSCH
Resource allocation and scheduling
for common channels
DL scheduling of UEs:
Scheduling of UEs/bearers to PRBs/RBGs
Start
End
Pre-Scheduling:
Select UEs eligible for scheduling
-> Determination of Candidate Set 1
Time domain scheduling
of UEs according to simple criteria
-> Determination of Candidate Set 2
Start
End
Frequency domain scheduling
of UEs/bearers
-> PRB/RBG allocation to UEs/bearers
17 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Downlink Scheduler Algorithm, cont. • Determine which PRBs are available (free) and can be allocated to Ues
• Allocate PRBs needed for common channels like SIB, paging, and random access procedure (RAP)
• Final allocation of UEs (bearers) onto PRB. Considering only the PRBs available after the previous steps
– Pre-Scheduling: All UEs with data available for transmission based on the buffer fill levels
– Time Domain Scheduling: Parameter MAX-#_UE_DL decides how many UEs are allocated in the TTI being scheduled
– Frequency Domain Scheduling for Candidate Set 2 UEs: Resource allocation in Frequency Domain including number and location of allocated PRBs
The scheduling is performed on cell basis. The two main functions are to decide which UE(s) shall be scheduled, the number of resources and the MCS to be applied.
Furthermore the scheduler needs to be QoS aware. There is priority given to random access responses, control data, HARQ retransmissions.
The channel quality may be taken in consideration.
In RL10 the DL exploits CQI reports to decide on frequency and time resources. In UL the scheduling decisions in RL10 are not based on quality but a random frequency allocation is deployed.
18 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Uplink Scheduler Channel Unaware
Example of allocation in frequency domain:
• Full Allocation: All available PRBs are
assigned to the UEs scheduled per TTI
• Fractional: Not all PRBs are assigned,
still the hoping function handles the
unassigned PRB as if they were
allocated to keep the equal distribution
per TTI
a) b)
19 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Uplink Scheduler Channel Unaware, cont.
Time domain:
• Evaluation of the #PRBs that will be assigned to UEs
• Available number of PRBs per user
– Multiple of 2, 3 or 5
• Max. # of UEs which can be scheduled per TTI time frame is restricted by an O&M parameter. RL T and RL10 limit the number to a max. of 10 UEs per TTI
Frequency Domain:
• Uses a random function to assure equal distribution of PRBs over the available frequency range ( random frequency hopping)
20 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
21 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Link Adaptation by AMC (UL/DL)
• Motivation of link adaptation: Modify the signal transmitted to and by a particular user
according to the signal quality variation to improve the system capacity and coverage
reliability.
• If SINR is good then higher MCS can be used -> more bits per byte -> more
throughput.
• If SINR is bad then lower MCS should be use ( more robust)
• Flexi Multimode BTS performs the link adaptation for DL and UL on a TTI basis
• The selection of the modulation and the channel coding rate is based:
• Downlink data channel: CQI report from UE
• Downlink common channel (PDCCH): signaling payload, CQI report
• Uplink: BLER measurements in Flexi LTE BTS
The effective Eb/No and hence the spectral efficiency depend on BLER. However there are QoS
requirements which also have to be considered. Taking both into account leads to a target
BLER.
AMC is in use in order to tune BLER so that the target value is reached. Therefore when channel
conditions change modulation and/or coding modifications might be needed.
22 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
PDSCH – AMC Algorithm
START
Retrieve Default MCS
Dynamic AMC
active?
HARQ
retransmission?
Determine avaraged CQI
value for allocated PRBs
Use the same MCS as for
initial transmission
Determine MCS
Use Default MCS
END
23 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
PDSCH – AMC Algorithm, cont.
An initial MCS is provided by O&M (parameter INI_MCS_DL) and is set as default MCS. If DL AMC is not
activated (O&M parameter ENABLE_AMC_DL) the algorithm always uses this default MCS.
If DL AMC is activated HARQ retransmissions are handled differently from initial transmissions ( For HARQ
retransmission the same MCS has to be used as for the initial transmission).
An MCS based on CQI reporting from UE shall be determined for the PRBs assigned to the UE as indicated
by the downlink scheduler. So the mechanism has UE scope with a frequency of several TTIs based on
configurable CQI measurement intervals.
In RL T the algorithm is based on overall signaling payload (control data volume) for all users and does not
depend on the actual radio condition.
The adaptation is done on cell-basis and per TTI. In RL10 the code rate is selected for PDCCH resources
(QPSK only) based on CQI reports. These CQI reports indicate the ‘CCE (Control Channel Elements)
aggregation level’ and hence the coding rate.
The usage of PDCCH resources are based on channel condition and in addition on the availability of PDCCH
resources into account. The feature may be enabled by O&M.
For AMC of the PUSCH a UE specific slow link adaptation ( 10-100ms) is applied. The decisions are based
on BLER measurements.
AMC works independently of UL scheduler and UL power control. Interactions to UL PC and scheduler are
result driven, i.e. to keep signaling load on eNodeB internal interfaces low, MCS is reported at the start of
data transfer and only when there are changes of MCS. In case of long link adaptation updates and to avoid
low and high BLER situations, the link adaptation can act based on adjustable target BLER values:
• “Emergency Downgrade” if BLER goes above a MAX BLER threshold (poor radio conditions);
• “Fast Upgrade” if BLER goes below of a MIN BLER threshold (excellent radio conditions).
24 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
25 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Modulation and TB Size
• Modulation and Coding Scheme (MCS) – 3GPP TS 36.211 specifies QPSK, 16QAM and 64QAM for the Physical
Downlink/Uplink Shared Channel
– Affects the amount of resources that will be used for user data
• Transport Block Set (TBS) – Number of user data bits transmitted to single user during one TTI (1ms)
– The TB occupies two resource blocks in time domain
3GPP TS 36.213 specifies tables to:
• link the MCS Index -> Modulation Order (modulation type) and TBS Index
• link the TBS Index -> Transport Block Size (TBS) for a specific number of Physical Resource Blocks (PRB)
• The exact mapping is shown in the next slides
26 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Modulation and TB Size DL MCSs
MCS ITBS MCS_index Mod order
0-QPSK 0 0 2
1-QPSK 1 1 2
2-QPSK 2 2 2
3-QPSK 3 3 2
4-QPSK 4 4 2
5-QPSK 5 5 2
6-QPSK 6 6 2
7-QPSK 7 7 2
8-QPSK 8 8 2
9-QPSK 9 9 2
10-16QAM 9 10 4
11-16QAM 10 11 4
12-16QAM 11 12 4
13-16QAM 12 13 4
14-16QAM 13 14 4
15-16QAM 14 15 4
16-16QAM 15 16 4
17-64QAM 15 17 6
18-64QAM 16 18 6
19-64QAM 17 19 6
20-64QAM 18 20 6
21-64QAM 19 21 6
22-64QAM 20 22 6
23-64QAM 21 23 6
24-64QAM 22 24 6
25-64QAM 23 25 6
26-64QAM 24 26 6
27-64QAM 25 27 6
28-64QAM 26 28 6
27 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Modulation and TB Size, cont.
From TS 36.213 (DL example shown here)
MCS index -> from 0 to 28 -> it is decided by the scheduler which should translate a
specific CQI in an MCS index
Modulation Order -> indicates the modulation type (QPSK, …) by indicating the
number of bits per symbol
QPSK = 2
16QAM = 4
64QAM = 6
ITBS = TBS index
The TBS Index is mapped to a specific TBS size for a specific #RBs
Uses a different table
28 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Modulation and TB Size
Example of mapping (DL-SCH) ITBS to a TBS size for a specific number of RBs (1..12 in this
example)
29 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
30 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Outer Link Quality Control (OLQC)
Feature: CQI Adaptation ( DL)
• Only used in DL
• Used for CQI measurement error compensation
– CQI estimation error of the UE
– CQI quantization error or
– CQI reporting error
• It adds a CQI offset to the CQI reports provided by UE. The corrected CQI report is
provided to the DL Link adaptation for further processing
• CQI offset derived from ACK/NACK feedback
Due to inaccuracies in the CQI reporting the performance may be downgraded. In
order to compensate these effects CQI adaptation is applied. The algorithm is based
on the comparison of the observed (averaged) ACK/NACK ratio with the target BLER.
A CQI offset can be derived which is added to the actual reported CQI values and so
forms the basis for the AMC algorithm.
31 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
32 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Power Control – Principle
Very low
Low
High
Very high
33 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Power Control – Principle, cont.
The transmission power is adapted in order to achieve the desired QoS (BLER/BER).
This adaptation is necessary since the propagation channel is subject to several conditions, which generally
vary in space and/or time, e.g. path loss, log normal fading, short term fading , UE speed
• location (outdoor, indoor, in-car) etc.
Downlink power control determines the energy per resource element (EPRE). The term resource element
energy denotes the energy prior to CP insertion. The term resource element energy also denotes the average
energy taken over all constellation points for the modulation scheme applied.
Uplink power control determines the average power over a DFT-SOFDM symbol in which the physical channel
is transmitted. Compared with UTRAN the UL power control is slower. The PUSCH and the PUCCH are
subject to a combined open and closed loop power control algorithm, i.e. to control the transmission power for
UL channels a combination of an open (input: pathloss, sysinfo and signaling) and a closed loop (TPC) method
is used.
A cell wide overload indicator (OI) and a High Interference Indicator (HII) to control UL interference are
exchanged over X2. An indication is given which PRBs an eNodeB scheduler allocates to cell edge UEs and
hence will be most sensitive to inter-cell interference.
Power control - already being applied in 2nd and 3rd generation networks - has high potential for improvement
of the performance of mobile networks.
Main benefits are:
It can bring down the interference in up- and downlink and hence enhances the capacity of the networks.
Additionally it helps to keep down the uplink-power consumption, thereby increasing the stand-by time for the
UE.
Furthermore, from the EMC (Electro Magnetic Compatibility) point of view it can improve the situation
considerably
34 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
DL Power Assignment Example
t
f
P
0 1 2 3 4 5 6
The eNodeB determines the downlink transmit energy per resource element (EPRE).
Downlink cell-specific reference-signal (RS) EPRE is constant across the downlink system bandwidth and
constant across all subframes until different cell-specific RS power information is received. The downlink RS
EPRE is given by the parameter Reference-signal-power provided by higher layers.
In cases 16QAM, 64QAM, spatial multiplex TRI>1 or multi-user MIMO the DL power is given by rA and rB
35 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
UL Power Control
1) Initial TX power level
2) SINR measurment
3) Setting new power offset4) TX power level
adjustment with the new
offset
Procedure for Slow UL Power control
UE controls the Tx power to keep the transmitted power spectral density (PSD) constant independent
of the allocated transmit bandwidth (#PRBs)
If no feedback from eNodeB ( in the PDCCH UL PC command) the UE performs open loop PC based
on path loss measurements
If feedback from eNodeB the UE corrects the PSD when receiving PC commands from eNodeB ( in the
PDCCH UL PC command)
PC commands ( up and down) based on UL quality and signal level measurements
Applied separately for PUSCH, PUCCH
Scope of UL PC is UE level ( performed separately for each UL in a cell)
36 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
37 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Types
E-UMTS micro cells
Intra-frequency HO
(intra eNB)
intra-frequency HO
(inter eNB, inter MME)
1a
interfrequency HO
other RAT
E-UMTS macro cell
intersystem HO
triggered by e.g.
- coverage of E-UMTS
- service
- load
1b
3
2
intersystem HO
triggered by other RAT
38 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Types, cont.
Handovers (HO) can be grouped into
INTRA-SYSTEM: EUTRAN EUTRAN (1):
Intra-frequency -(example 1a):
Inter-frequency -(example 1b):
INTER-SYSTEM / INTER-RAT:
EUTRAN UTRAN, GERAN .. (example 2)
GERAN, UTRAN … EUTRAN HO’s. (example 3),
Not discussed further, since this HO type is triggered by GERAN.
39 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Principles -> Lossless
– Packets are forwarded from the source to the target
-> Network-controlled
– Target cell is selected by the network, not by the UE
– Handover control in E-UTRAN (not in packet core)
-> UE-assisted
– Measurements are made and reported by the UE to the network
-> Late path switch
– Only once the handover is successful, the packet core is involved
Handover Algorithm
A Handover will be initiated by a measurement report, which is sent via the Radio Resource Control (RRC)
protocol. Upon the reception of this measurement report, the handover algorithm will decide whether a handover
should take place.
In response to the handover decision, the handover execution will be carried out using the corresponding
procedures. After the handover execution, the handover algorithm will be informed, whether the handover was
successful or not.
The Handover procedure is composed of a number of single functions:
• Measurements
• Filtering of measurements
• Reporting of measurement results
• Hard handover algorithm
• Execution of handover
40 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Procedure
= GTP signaling
S-GW + P-GW
MME
Source eNB
Target eNB
MME MME MME
= Data in radio
= Signaling in radio
= GTP tunnel
= S1 signaling
= X2 signaling
Before
handover
Handover
preparation Radio handover
Late path
switching
S-GW + P-
GW
S-GW + P-GW S-GW + P-GW
X2
41 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Preparation
UE Source Target MME GW
1. Measurement control
2. Measurement report
3. HO decision
4. HO request
5. Admission control
6. HO request ack.
42 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Preparation, cont.
1. The source eNB configures the UE measurement procedures with MEASUREMENT CONTROL
2. UE is triggered to send MEASUREMENT REPORT to the source eNB. It can be event triggered or
periodic
3. Source eNB makes handover decision based on UE report + load and service information
4. The source eNB issues a HANDOVER REQUEST to the target eNB
5. Target eNB performs admission control
6. Target eNB sends the HANDOVER REQUEST ACKNOWLEDGE to the source eNB
When the UE is in LTE_ACTIVE state, mobility handling takes place via network controlled handovers with
UE assistance. UE assistance here simply means that the UE does measurements and reports them to the
eNB to assist in the handover decision. Currently it is planed that neighbor cell measurements are based on
the UE’s cell detection capabilities rather than on a network supplied neighbor cell list.
When the source (current serving) eNB decides to start a handover of an UE to a neighbor cell in a new
(target) eNB it will contact this target eNB. This is done via the X2-AP message HANDOVER REQUEST. The
message will contain the target cell for the UE, the current serving MME and SAE GW. It is task of the target
eNB to allocate virtual capacity in the target cell via its admission control function.
If this is done the target eNB returns part of the handover message for the UE within the X2-AP message
HANDOVER REQUEST ACKNOWLEDGE. In this message also a data forwarding tunnel (TEID from target
eNB) is indicated. It allows the source eNB to forward still buffered or still arriving downlink packets to the
target eNB.
43 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Execution
UE Source Target MME GW
7. HO command
8. Status transfer
Forward packets to target
Buffer packets from source
9. Synchronization
10. UL allocation and timing advance
11. Handover confirm
44 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Execution, cont.
7. Source eNB generates the HANDOVER COMMAND towards UE, Source eNB starts
forwarding packets to target eNB
8. Source eNB sends status information to target eNB
9. UE performs the final synchronization to target eNB and accesses the cell via RACH
procedure DL pre-synchronization is obtained during cell identification and measurements
10. Target eNB gives the uplink allocation and timing advance information
11. UE sends HANDOVER CONFIRM to target eNB, Target eNB can begin to send data to UE
The source eNB can now give the HANDOVER COMMAND (RRC) to the UE. The command
contains the configuration for the UE in the new cell and possibly already an UL/DL resource
allocation. The UE will detach from the old cell and synchronize itself to the new cell. In the
mean time the source eNB can start downlink packet forwarding via X2 interface.
Once synchronization between UE and the new cell is achieved, the UE confirms the handover
with RRC message HANDOVER CONFIRM. This will trigger a HANDOVER COMPLETE
message of S1-AP to be sent to the MME. It simply informs the MME that now a new eNB is
responsible for the UE. Thus this message will contain the IP addresses and TEIDs of the target
eNB for the S1 tunnels.
45 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Completion
UE Source Target MME GW
12. Path switch request
13. User plane update request
14. Switch downlink path
15. User plane update response
16. Path switch request ack.
17. Release resources
18. Release resources
46 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Handover Completion, cont.
12. Target eNB sends a PATH SWITCH message to MME to inform that the UE has changed
cell
13. MME sends a USER PLANE UPDATE REQUEST message to Serving Gateway
14. Serving Gateway switches the downlink data path to the target side
15. Serving Gateway sends a USER PLANE UPDATE RESPONSE message to MME
16. MME confirms the PATH SWITCH message with the PATH SWITCH ACK message
17. By sending RELEASE RESOURCE the target eNB informs success of handover to source
eNB and triggers the release of resources
18. Upon reception of the RELEASE RESOURCE message, the source eNB can release radio
and C-plane related resources associated to the UE context
The MME’s task is to send this information via GTP-C UPDATE BEARER REQUEST to the SAE
GW. This will switch the traffic path now completely from SAE GW to target eNB.
When the path is switched, the old eNB will get the S1-AP message RELEASE RESOURCE
which will clear down all allocated resources for the UE that is already in the new eNB.
47 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Radio Resource Management
RRM in eNodeB
Radio Admision Control
Scheduling
Link Quality Control
– Adaptive Modulation and Coding
– Modulation and Transport Block Size
– Outer Link Quality Control
– Power Control
Handover Control
Discontinuous Transmission (DTX)
48 CT82355EN01GLA1 ©2014 Nokia Solutions and Networks. All rights reserved.
Discontinuous Transmission in DL (DTX)
Sleep periods needed for mobiles in RRC Connected Mode to save UE battery power
Basic idea → UE is not monitoring PDCCH in some specified subframes and it sleeps:
→ ON period to be defined (UE active and monitoring PDCCH)
→ OFF period (UE sleeping not monitoring PDCCH)
The ON/OFF periods should be set-up in such way to maintain the QoS (latency) of the application
→ Example web browsing: ON period = 1 ms (1 subframe)
OFF period 100 ms (100 subframes)
DTX is configured via higher layer parameters